[Docs] [txt|pdf|xml|html] [Tracker] [WG] [Email] [Diff1] [Diff2] [Nits]

Versions: (draft-gould-regext-login-security) 00 01 02 03 04 05 06

Network Working Group                                           J. Gould
Internet-Draft                                                  M. Pozun
Intended status: Standards Track                          VeriSign, Inc.
Expires: May 1, 2020                                    October 29, 2019


Login Security Extension for the Extensible Provisioning Protocol (EPP)
                  draft-ietf-regext-login-security-05

Abstract

   The Extensible Provisioning Protocol (EPP) includes a client
   authentication scheme that is based on a user identifier and
   password.  The structure of the password field is defined by an XML
   Schema data type that specifies minimum and maximum password length
   values, but there are no other provisions for password management
   other than changing the password.  This document describes an EPP
   extension that allows longer passwords to be created and adds
   additional security features to the EPP login command and response.

Status of This Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at https://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on May 1, 2020.

Copyright Notice

   Copyright (c) 2019 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (https://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must



Gould & Pozun              Expires May 1, 2020                  [Page 1]


Internet-Draft                  loginSec                    October 2019


   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   2
     1.1.  Conventions Used in This Document . . . . . . . . . . . .   3
   2.  Migrating to Newer Versions of This Extension . . . . . . . .   3
   3.  Object Attributes . . . . . . . . . . . . . . . . . . . . . .   4
     3.1.  Event . . . . . . . . . . . . . . . . . . . . . . . . . .   4
     3.2.  "[LOGIN-SECURITY]" Password . . . . . . . . . . . . . . .   5
     3.3.  Dates and Times . . . . . . . . . . . . . . . . . . . . .   6
   4.  EPP Command Mapping . . . . . . . . . . . . . . . . . . . . .   6
     4.1.  EPP <login> Command . . . . . . . . . . . . . . . . . . .   6
   5.  Formal Syntax . . . . . . . . . . . . . . . . . . . . . . . .  14
     5.1.  Login Security Extension Schema . . . . . . . . . . . . .  14
   6.  IANA Considerations . . . . . . . . . . . . . . . . . . . . .  16
     6.1.  XML Namespace . . . . . . . . . . . . . . . . . . . . . .  16
     6.2.  EPP Extension Registry  . . . . . . . . . . . . . . . . .  17
   7.  Implementation Status . . . . . . . . . . . . . . . . . . . .  17
     7.1.  Verisign EPP SDK  . . . . . . . . . . . . . . . . . . . .  18
   8.  Security Considerations . . . . . . . . . . . . . . . . . . .  18
   9.  Acknowledgements  . . . . . . . . . . . . . . . . . . . . . .  19
   10. References  . . . . . . . . . . . . . . . . . . . . . . . . .  19
     10.1.  Normative References . . . . . . . . . . . . . . . . . .  19
     10.2.  Informative References . . . . . . . . . . . . . . . . .  19
     10.3.  URIs . . . . . . . . . . . . . . . . . . . . . . . . . .  20
   Appendix A.  Change History . . . . . . . . . . . . . . . . . . .  20
     A.1.  Change from 00 to 01  . . . . . . . . . . . . . . . . . .  20
     A.2.  Change from 01 to 02  . . . . . . . . . . . . . . . . . .  20
     A.3.  Change from 02 to 03  . . . . . . . . . . . . . . . . . .  20
     A.4.  Change from 03 to REGEXT 00 . . . . . . . . . . . . . . .  20
     A.5.  Change from REGEXT 00 to REGEXT 01  . . . . . . . . . . .  20
     A.6.  Change from REGEXT 01 to REGEXT 02  . . . . . . . . . . .  21
     A.7.  Change from REGEXT 02 to REGEXT 03  . . . . . . . . . . .  21
     A.8.  Change from REGEXT 03 to REGEXT 04  . . . . . . . . . . .  22
     A.9.  Change from REGEXT 04 to REGEXT 05  . . . . . . . . . . .  22
   Authors' Addresses  . . . . . . . . . . . . . . . . . . . . . . .  22

1.  Introduction

   This document describes an Extensible Provisioning Protocol (EPP)
   extension for enhancing the security of the EPP login command in EPP
   RFC 5730.  The enhancements include supporting longer passwords (or
   passphrases) than the 16-character maximum and providing a list of
   security events in the login response.  The password (current and
   new) in EPP RFC 5730 can be overridden by the password included in



Gould & Pozun              Expires May 1, 2020                  [Page 2]


Internet-Draft                  loginSec                    October 2019


   the extension to extend past the 16-character maximum.  The security
   events supported include: password expiry, client certificate expiry,
   insecure cipher, insecure TLS protocol, new pasword complexity, login
   security statistical warning, and a custom event.  The attributes
   supported by the security events include identifying the event type
   or sub-type, indicating the security level of warning or error, a
   future or past-due expiration date, the value that resulted in the
   event, the duration of the statistical event, and a free-form
   description with an optional language.

1.1.  Conventions Used in This Document

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
   "OPTIONAL" in this document are to be interpreted as described in BCP
   14 [RFC2119] [RFC8174] when, and only when, they appear in all
   capitals, as shown here.

   XML is case sensitive.  Unless stated otherwise, XML specifications
   and examples provided in this document MUST be interpreted in the
   character case presented in order to develop a conforming
   implementation.

   In examples, "C:" represents lines sent by a protocol client and "S:"
   represents lines returned by a protocol server.  Indentation and
   white space in examples are provided only to illustrate element
   relationships and are not a required feature of this protocol.

   "loginSec-1.0" is used as an abbreviation for
   "urn:ietf:params:xml:ns:epp:loginSec-1.0".  The XML namespace prefix
   "loginSec" is used, but implementations MUST NOT depend on it and
   instead employ a proper namespace-aware XML parser and serializer to
   interpret and output the XML documents.

2.  Migrating to Newer Versions of This Extension

   Servers which implement this extension SHOULD provide a way for
   clients to progressively update their implementations when a new
   version of the extension is deployed.

   Servers SHOULD (for a temporary migration period) provide support for
   older versions of the extension in parallel to the newest version,
   and allow clients to select their preferred version via the
   <svcExtension> element of the <login> command.

   If a client requests multiple versions of the extension at login,
   then, when preparing responses to commands which do not include
   extension elements, the server SHOULD only include extension elements



Gould & Pozun              Expires May 1, 2020                  [Page 3]


Internet-Draft                  loginSec                    October 2019


   in the namespace of the newest version of the extension requested by
   the client.

   When preparing responses to commands which do include extension
   elements, the server SHOULD only include extension elements for the
   extension versions present in the command.

3.  Object Attributes

   This extension adds additional elements to [RFC5730] login command
   and response.  Only those new elements are described here.

3.1.  Event

   A security event, using the <loginSec:event> element, represents
   either a warning or error identified by the server after the client
   has connected and submitted the login command.  There MAY be multiple
   events returned that provide information for the client to address.
   The <loginSec:event> MAY include a free-form description.  All of the
   security events use a consistent set of attributes, where the exact
   set of applicable attributes is based on the event type.  The
   supported set of <loginSec:event> element attributes include:

   "type":  A REQUIRED attribute that defines the type of security
       event.  The enumerated list of "type" values includes:


       "password":  Identifies a password expiry event, where the
           password expires in the future or has expired based on the
           "exDate" date and time.
       "certificate":  Identifies a client certificate expiry event,
           where the client certificate will expire at the "exDate" date
           and time.
       "cipher":  Identifies the use of an insecure or deprecated TLS
           cipher suite.
       "tlsProtocol":  Identifies the use of an insecure or deprecated
           TLS protocol.
       "newPW":  The new password does not meet the server password
           complexity requirements.
       "stat":  Provides a login security statistical warning that MUST
           set the "name" attribute to the name of the statistic sub-
           type.
       "custom":  Custom event type that MUST set the "name" attribute
           with the custom event type name.
   "name":  Used to define a sub-type when the "type" attribute is not
       "custom" or the full type name when the "type" attribute is
       "custom".  The "name" attribute MUST be set when the "type"
       attribute is "stat" or "custom".



Gould & Pozun              Expires May 1, 2020                  [Page 4]


Internet-Draft                  loginSec                    October 2019


   "level":  Defines the level of the event as either "warning" for a
       warning event that needs action, or "error" for an error event
       that requires immediate action.
   "exDate":  Contains the date and time that a "warning" level has or
       will become an "error" level.  At expiry there MAY be an error to
       connect or MAY be an error to login.  An example is an expired
       certificate that will result in an error to connect or an expired
       password that may result in a failed login.
   "value":  Identifies the value that resulted in the login security
       event.  An example is the negotiated insecure cipher suite or the
       negotiated insecure TLS protocol.
   "duration":  Defines the duration that a statistical event is
       associated with, ending when the login command was received.  The
       format of the duration is defined by the duration primitive
       datatype in [W3C.REC-xmlschema-2-20041028].
   "lang":  Identifies the negotiated language of the free-form
       description.  The default is "en" (English).

   Example login security event for password expiration, where the
   current date is 2018-03-25:

   <loginSec:event
     type="password"
     level="warning"
     exDate="2018-04-01T22:00:00.0Z"
     lang="en">
     Password expiration soon
   </loginSec:event>

   Example login security event for identifying 100 failed logins over
   the last day, using the "stat" sub-type of "failedLogins":

   <loginSec:event
     type="stat"
     name="failedLogins"
     level="warning"
     value="100"
     duration="P1D">
     Excessive invalid daily logins
   </loginSec:event>

3.2.  "[LOGIN-SECURITY]" Password

   The <loginSec:pw> element MUST override the [RFC5730] <pw> element
   only if the <pw> contains the predefined value of "[LOGIN-SECURITY]",
   which is a constant value for the server to use the <loginSec:pw>
   element for the password.  Similarly, the <loginSec:newPW> element
   MUST override the [RFC5730] <newPW> element only if the <newPW>



Gould & Pozun              Expires May 1, 2020                  [Page 5]


Internet-Draft                  loginSec                    October 2019


   contains the predefined value of "[LOGIN-SECURITY]", which is a
   constant value for the server to use the <loginSec:newPW> element for
   the new password.  The "[LOGIN-SECURITY]" pre-defined string MUST be
   supported by the server for the client to explicitly indicate to the
   server whether to use <loginSec:pw> element in place of the [RFC5730]
   <pw> element or to use the <loginSec:newPW> in place of the [RFC5730]
   <newPW> element.  The server MUST NOT allow the client to set the
   password to the value "[LOGIN-SECURITY]".

3.3.  Dates and Times

   Date and time attribute values MUST be represented in Universal
   Coordinated Time (UTC) using the Gregorian calendar.  The extended
   date-time form using upper case "T" and "Z" characters defined in
   [W3C.REC-xmlschema-2-20041028] MUST be used to represent date-time
   values, as XML Schema does not support truncated date-time forms or
   lower case "T" and "Z" characters.

4.  EPP Command Mapping

   A detailed description of the EPP syntax and semantics can be found
   in the EPP core protocol specification [RFC5730].

4.1.  EPP <login> Command

   This extension defines additional elements to extend the EPP <login>
   command and response to be used in conjunction with [RFC5730].

   The EPP <login> command is used to establish a session with an EPP
   server.  This extension overrides the password that is passed with
   the [RFC5730] <pw> or the <newPW> element as defined in Section 3.2.
   A <loginSec:loginSec> element is sent along with the [RFC5730]
   <login> command and MUST contain at least one of the following child
   elements:

   <loginSec:userAgent>:  OPTIONAL client user agent that identifies the
       client application software, technology, and operating system
       used by the server to identify functional or security
       constraints, current security issues, and potential future
       functional or security issues for the client.  The
       <loginSec:userAgent> element MUST contain at least one of the
       following child elements:


       <loginSec:app>:  OPTIONAL name of the client application software
           with version if available, such as the name of the client SDK
           "EPP SDK 1.0.0".




Gould & Pozun              Expires May 1, 2020                  [Page 6]


Internet-Draft                  loginSec                    October 2019


       <loginSec:tech>:  OPTIONAL technology used for the client
           software with version if available, such as "Java 11.0.2".
       <loginSec:os>:  OPTIONAL client operating system used with
           version if available, such as "x86_64 Mac OS X 10.11.6".
   <loginSec:pw>:  OPTIONAL plain text password that is case sensitive,
       has a minimum length of 6 characters, and has a maximum length
       that is up to server policy.  All leading and trailing whitespace
       is removed, and all internal contiguous whitespace that includes
       #x9 (tab), #xA (linefeed), #xD (carriage return), and #x20
       (space) is replaced with a single #x20 (space).  This element
       MUST only be used if the [RFC5730] <pw> element is set to the
       "[LOGIN-SECURITY]" value.
   <loginSec:newPW>:  OPTIONAL plain text new password that is case
       sensitive, has a minimum length of 6 characters, and has a
       maximum length that is up to server policy.  All leading and
       trailing whitespace is removed, and all internal contiguous
       whitespace that includes #x9 (tab), #xA (linefeed), #xD (carriage
       return), and #x20 (space) is replaced with a single #x20 (space).
       This element MUST only be used if the [RFC5730] <newPW> element
       is set to the "[LOGIN-SECURITY]" value.































Gould & Pozun              Expires May 1, 2020                  [Page 7]


Internet-Draft                  loginSec                    October 2019


   Example login command that uses the <loginSec:pw> element instead of
   the [RFC5730] <pw> element to establish the session and includes the
   <loginSec:userAgent> element:

   C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
   C:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0">
   C:  <command>
   C:    <login>
   C:      <clID>ClientX</clID>
   C:      <pw>[LOGIN-SECURITY]</pw>
   C:      <options>
   C:        <version>1.0</version>
   C:        <lang>en</lang>
   C:      </options>
   C:      <svcs>
   C:        <objURI>urn:ietf:params:xml:ns:obj1</objURI>
   C:        <objURI>urn:ietf:params:xml:ns:obj2</objURI>
   C:        <objURI>urn:ietf:params:xml:ns:obj3</objURI>
   C:        <svcExtension>
   C:          <extURI>urn:ietf:params:xml:ns:epp:loginSec-1.0</extURI>
   C:        </svcExtension>
   C:      </svcs>
   C:    </login>
   C:    <extension>
   C:      <loginSec:loginSec
   C:        xmlns:loginSec=
   C:          "urn:ietf:params:xml:ns:epp:loginSec-1.0">
   C:        <loginSec:userAgent>
   C:          <loginSec:app>EPP SDK 1.0.0</loginSec:app>
   C:          <loginSec:tech>Java 11.0.2</loginSec:tech>
   C:          <loginSec:os>x86_64 Mac OS X 10.11.6</loginSec:os>
   C:        </loginSec:userAgent>
   C:        <loginSec:pw>this is a long password</loginSec:pw>
   C:      </loginSec:loginSec>
   C:    </extension>
   C:    <clTRID>ABC-12345</clTRID>
   C:  </command>
   C:</epp>













Gould & Pozun              Expires May 1, 2020                  [Page 8]


Internet-Draft                  loginSec                    October 2019


   Example login command that uses the <loginSec:pw> element instead of
   the [RFC5730] <pw> element to establish the session, and uses the
   <loginSec:newPW> element instead of the [RFC5730] <newPW> element to
   set the new password:

   C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
   C:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0">
   C:  <command>
   C:    <login>
   C:      <clID>ClientX</clID>
   C:      <pw>[LOGIN-SECURITY]</pw>
   C:      <newPW>[LOGIN-SECURITY]</newPW>
   C:      <options>
   C:        <version>1.0</version>
   C:        <lang>en</lang>
   C:      </options>
   C:      <svcs>
   C:        <objURI>urn:ietf:params:xml:ns:obj1</objURI>
   C:        <objURI>urn:ietf:params:xml:ns:obj2</objURI>
   C:        <objURI>urn:ietf:params:xml:ns:obj3</objURI>
   C:        <svcExtension>
   C:          <extURI>urn:ietf:params:xml:ns:epp:loginSec-1.0</extURI>
   C:        </svcExtension>
   C:      </svcs>
   C:    </login>
   C:    <extension>
   C:      <loginSec:loginSec
   C:        xmlns:loginSec=
   C:          "urn:ietf:params:xml:ns:epp:loginSec-1.0">
   C:        <loginSec:pw>this is a long password
   C:        </loginSec:pw>
   C:        <loginSec:newPW>new password that is still long
   C:        </loginSec:newPW>
   C:      </loginSec:loginSec>
   C:    </extension>
   C:    <clTRID>ABC-12345</clTRID>
   C:  </command>
   C:</epp>













Gould & Pozun              Expires May 1, 2020                  [Page 9]


Internet-Draft                  loginSec                    October 2019


   Example login command that uses the [RFC5730] <pw> element to
   establish the session, and uses the <loginSec:newPW> element instead
   of the [RFC5730] <newPW> element to set the new password:

   C:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
   C:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0">
   C:  <command>
   C:    <login>
   C:      <clID>ClientX</clID>
   C:      <pw>shortpassword</pw>
   C:      <newPW>[LOGIN-SECURITY]</newPW>
   C:      <options>
   C:        <version>1.0</version>
   C:        <lang>en</lang>
   C:      </options>
   C:      <svcs>
   C:        <objURI>urn:ietf:params:xml:ns:obj1</objURI>
   C:        <objURI>urn:ietf:params:xml:ns:obj2</objURI>
   C:        <objURI>urn:ietf:params:xml:ns:obj3</objURI>
   C:        <svcExtension>
   C:          <extURI>urn:ietf:params:xml:ns:epp:loginSec-1.0</extURI>
   C:        </svcExtension>
   C:      </svcs>
   C:    </login>
   C:    <extension>
   C:      <loginSec:loginSec
   C:        xmlns:loginSec=
   C:          "urn:ietf:params:xml:ns:epp:loginSec-1.0">
   C:        <loginSec:newPW>new password that is still long
   C:        </loginSec:newPW>
   C:      </loginSec:loginSec>
   C:    </extension>
   C:    <clTRID>ABC-12345</clTRID>
   C:  </command>
   C:</epp>

   Upon a completed login command (success or failed), the extension
   MUST be included in the response based on both of the following
   conditions:

   Client supports extension:  The client supports the extension based
       on the <svcExtension> element of the <login> command.
   At least one login security event:  The server has identified at
       least one login security event to communicate to the client.

   The extension to the EPP response uses the <loginSec:loginSecData>
   element that contains the following child elements:




Gould & Pozun              Expires May 1, 2020                 [Page 10]


Internet-Draft                  loginSec                    October 2019


   <loginSec:event>:  One or more <loginSec:event> elements defined in
       Section 3.1.

   Example EPP response to a successful login command on 2018-03-25,
   where the password will expire in a week:

   S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
   S:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0">
   S:  <response>
   S:    <result code="1000">
   S:      <msg>Command completed successfully</msg>
   S:    </result>
   S:    <extension>
   S:      <loginSec:loginSecData
   S:        xmlns:loginSec=
   S:          "urn:ietf:params:xml:ns:epp:loginSec-1.0">
   S:        <loginSec:event
   S:          type="password"
   S:          level="warning"
   S:          exDate="2018-04-01T22:00:00.0Z"
   S:          lang="en">
   S:          Password expiring in a week
   S:        </loginSec:event>
   S:      </loginSec:loginSecData>
   S:    </extension>
   S:    <trID>
   S:      <clTRID>ABC-12345</clTRID>
   S:      <svTRID>54321-XYZ</svTRID>
   S:    </trID>
   S:  </response>
   S:</epp>




















Gould & Pozun              Expires May 1, 2020                 [Page 11]


Internet-Draft                  loginSec                    October 2019


   Example EPP response to a failed login command where the password has
   expired and the new password does not meet the server complexity
   requirements:

   S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
   S:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0">
   S:  <response>
   S:    <result code="2200">
   S:      <msg>Authentication error</msg>
   S:    </result>
   S:    <extension>
   S:      <loginSec:loginSecData
   S:        xmlns:loginSec=
   S:          "urn:ietf:params:xml:ns:epp:loginSec-1.0">
   S:        <loginSec:event
   S:          type="password"
   S:          level="error"
   S:          exDate="2018-03-26T22:00:00.0Z">
   S:          Password has expired
   S:        </loginSec:event>
   S:        <loginSec:event
   S:          type="newPW"
   S:          level="error">
   S:          New password does not meet complexity requirements
   S:        </loginSec:event>
   S:      </loginSec:loginSecData>
   S:    </extension>
   S:    <trID>
   S:      <clTRID>ABC-12345</clTRID>
   S:      <svTRID>54321-XYZ</svTRID>
   S:    </trID>
   S:  </response>
   S:</epp>

   Example EPP response to a successful login command where there is a
   set of login security events:

   S:<?xml version="1.0" encoding="UTF-8" standalone="no"?>
   S:<epp xmlns="urn:ietf:params:xml:ns:epp-1.0">
   S:  <response>
   S:    <result code="1000">
   S:      <msg>Command completed successfully</msg>
   S:    </result>
   S:    <extension>
   S:      <loginSec:loginSecData
   S:        xmlns:loginSec=
   S:          "urn:ietf:params:xml:ns:epp:loginSec-1.0">
   S:        <loginSec:event



Gould & Pozun              Expires May 1, 2020                 [Page 12]


Internet-Draft                  loginSec                    October 2019


   S:          type="password"
   S:          level="warning"
   S:          exDate="2018-04-01T22:00:00.0Z"
   S:          lang="en">
   S:          Password expiration soon
   S:        </loginSec:event>
   S:        <loginSec:event
   S:          type="certificate"
   S:          level="warning"
   S:          exDate="2018-04-02T22:00:00.0Z"/>
   S:        <loginSec:event
   S:          type="cipher"
   S:          level="warning"
   S:          value="TLS_RSA_WITH_AES_128_CBC_SHA">
   S:          Non-PFS Cipher negotiated
   S:        </loginSec:event>
   S:        <loginSec:event
   S:          type="tlsProtocol"
   S:          level="warning"
   S:          value="TLSv1.0">
   S:          Insecure TLS protocol negotiated
   S:        </loginSec:event>
   S:        <loginSec:event
   S:          type="stat"
   S:          name="failedLogins"
   S:          level="warning"
   S:          value="100"
   S:          duration="P1D">
   S:          Excessive invalid daily logins
   S:        </loginSec:event>
   S:        <loginSec:event
   S:          type="custom"
   S:          name="myCustomEvent"
   S:          level="warning">
   S:          A custom login security event occured
   S:        </loginSec:event>
   S:      </loginSec:loginSecData>
   S:    </extension>
   S:    <trID>
   S:      <clTRID>ABC-12345</clTRID>
   S:      <svTRID>54321-XYZ</svTRID>
   S:    </trID>
   S:  </response>
   S:</epp>







Gould & Pozun              Expires May 1, 2020                 [Page 13]


Internet-Draft                  loginSec                    October 2019


5.  Formal Syntax

   One schema is presented here that is the EPP Login Security Extension
   schema.

   The formal syntax presented here is a complete schema representation
   of the object mapping suitable for automated validation of EPP XML
   instances.  The BEGIN and END tags are not part of the schema; they
   are used to note the beginning and ending of the schema for URI
   registration purposes.

5.1.  Login Security Extension Schema

   BEGIN
   <?xml version="1.0" encoding="UTF-8"?>
   <schema xmlns="http://www.w3.org/2001/XMLSchema"
     xmlns:epp="urn:ietf:params:xml:ns:epp-1.0"
     xmlns:eppcom="urn:ietf:params:xml:ns:eppcom-1.0"
     xmlns:loginSec="urn:ietf:params:xml:ns:epp:loginSec-1.0"
     targetNamespace="urn:ietf:params:xml:ns:epp:loginSec-1.0"
     elementFormDefault="qualified">
     <!--
     Import common element types.
     -->
     <import namespace="urn:ietf:params:xml:ns:eppcom-1.0" />
     <import namespace="urn:ietf:params:xml:ns:epp-1.0" />
     <annotation>
       <documentation>Extensible Provisioning Protocol v1.0
          Login Security Extension Schema.</documentation>
     </annotation>
     <!-- Login command extension elements -->
     <element name="loginSec" type="loginSec:loginSecType" />
     <!--
       Attributes associated with the login command extension.
      -->
     <complexType name="loginSecType">
       <sequence>
         <element name="userAgent"
           type="loginSec:userAgentType" minOccurs="0" />
         <element name="pw"
           type="loginSec:pwType" minOccurs="0" />
         <element name="newPW"
           type="loginSec:pwType" minOccurs="0" />
       </sequence>
     </complexType>
     <simpleType name="pwType">
       <restriction base="token">
         <minLength value="6" />



Gould & Pozun              Expires May 1, 2020                 [Page 14]


Internet-Draft                  loginSec                    October 2019


       </restriction>
     </simpleType>
     <complexType name="userAgentType">
       <choice>
         <sequence>
           <element name="app"
             type="token" />
           <element name="tech"
             type="token" minOccurs="0" />
           <element name="os"
             type="token" minOccurs="0" />
         </sequence>
         <sequence>
           <element name="tech"
             type="token" />
           <element name="os"
             type="token" minOccurs="0" />
         </sequence>
         <element name="os"
           type="token" />
       </choice>
     </complexType>
     <!-- Login response extension elements -->
     <element name="loginSecData"
       type="loginSec:loginSecDataType" />
     <complexType name="loginSecDataType">
       <sequence>
         <element name="event"
           type="loginSec:eventType"
           minOccurs="1" maxOccurs="unbounded" />
       </sequence>
     </complexType>
     <!-- Security event element -->
     <complexType name="eventType">
       <simpleContent>
         <extension base="normalizedString">
           <attribute name="type"
             type="loginSec:typeEnum" use="required" />
           <attribute name="name"
             type="token" />
           <attribute name="level"
             type="loginSec:levelEnum" use="required" />
           <attribute name="exDate"
             type="dateTime" />
           <attribute name="value"
             type="token" />
           <attribute name="duration"
             type="duration" />



Gould & Pozun              Expires May 1, 2020                 [Page 15]


Internet-Draft                  loginSec                    October 2019


           <attribute name="lang"
             type="language" default="en" />
         </extension>
       </simpleContent>
     </complexType>
     <!--
       Enumerated list of event types, with extensibility via "custom".
       -->
     <simpleType name="typeEnum">
       <restriction base="token">
         <enumeration value="password" />
         <enumeration value="certificate" />
         <enumeration value="cipher" />
         <enumeration value="tlsProtocol" />
         <enumeration value="newPW" />
         <enumeration value="stat" />
         <enumeration value="custom" />
       </restriction>
     </simpleType>
     <!--
       Enumerated list of levels.
       -->
     <simpleType name="levelEnum">
       <restriction base="token">
         <enumeration value="warning" />
         <enumeration value="error" />
       </restriction>
     </simpleType>
     <!--
    End of schema.
    -->
   </schema>
   END

6.  IANA Considerations

6.1.  XML Namespace

   This document uses URNs to describe XML namespaces and XML schemas
   conforming to a registry mechanism described in [RFC3688].  The
   following URI assignment is requested of IANA:

   Registration request for the loginSec namespace:

      URI: urn:ietf:params:xml:ns:epp:loginSec-1.0
      Registrant Contact: IESG
      XML: None.  Namespace URIs do not represent an XML specification.




Gould & Pozun              Expires May 1, 2020                 [Page 16]


Internet-Draft                  loginSec                    October 2019


   Registration request for the loginSec XML schema:

      URI: urn:ietf:params:xml:schema:epp:loginSec-1.0
      Registrant Contact: IESG
      XML: See the "Formal Syntax" section of this document.

6.2.  EPP Extension Registry

   The EPP extension described in this document should be registered by
   the IANA in the EPP Extension Registry described in [RFC7451].  The
   details of the registration are as follows:

   Name of Extension: "Login Security Extension for the Extensible
   Provisioning Protocol (EPP)"

   Document status: Standards Track

   Reference: (insert reference to RFC version of this document)

   Registrant Name and Email Address: IESG, <iesg@ietf.org>

   TLDs: Any

   IPR Disclosure: None

   Status: Active

   Notes: None

7.  Implementation Status

   Note to RFC Editor: Please remove this section and the reference to
   RFC 7942 [RFC7942] before publication.

   This section records the status of known implementations of the
   protocol defined by this specification at the time of posting of this
   Internet-Draft, and is based on a proposal described in RFC 7942
   [RFC7942].  The description of implementations in this section is
   intended to assist the IETF in its decision processes in progressing
   drafts to RFCs.  Please note that the listing of any individual
   implementation here does not imply endorsement by the IETF.
   Furthermore, no effort has been spent to verify the information
   presented here that was supplied by IETF contributors.  This is not
   intended as, and must not be construed to be, a catalog of available
   implementations or their features.  Readers are advised to note that
   other implementations may exist.





Gould & Pozun              Expires May 1, 2020                 [Page 17]


Internet-Draft                  loginSec                    October 2019


   According to RFC 7942 [RFC7942], "this will allow reviewers and
   working groups to assign due consideration to documents that have the
   benefit of running code, which may serve as evidence of valuable
   experimentation and feedback that have made the implemented protocols
   more mature.  It is up to the individual working groups to use this
   information as they see fit".

7.1.  Verisign EPP SDK

   Organization: Verisign Inc.

   Name: Verisign EPP SDK

   Description: The Verisign EPP SDK includes both a full client
   implementation and a full server stub implementation of draft-ietf-
   regext-login-security.

   Level of maturity: Development

   Coverage: All aspects of the protocol are implemented.

   Licensing: GNU Lesser General Public License

   Contact: jgould@verisign.com

   URL: https://www.verisign.com/en_US/channel-resources/domain-
   registry-products/epp-sdks

8.  Security Considerations

   The extension leaves the password (<pw> element) and new password
   (<newPW> element) minimum length beyond 6 characters and the maximum
   length up to sever policy.  The server SHOULD enforce minimum and
   maximum length requirements that are appropriate for their operating
   environment.  One example of a guideline for password length policies
   can be found in section 5 of NIST Special Publication 800-63B [1].

   The client SHOULD NOT decrease the security of a new password by
   decreasing the length of the current password.  For example, a client
   with a 20 character password set using the extension, should not use
   the login command in [RFC5730] without using the extension, to set a
   new password that is less than or equal to 16 characters.

   The extension provides an extensible list of login security events to
   inform clients of connection and login warnings and errors.






Gould & Pozun              Expires May 1, 2020                 [Page 18]


Internet-Draft                  loginSec                    October 2019


9.  Acknowledgements

   The authors wish to thank the following persons for their feedback
   and suggestions:

   o  Martin Casanova
   o  Scott Hollenbeck
   o  Patrick Mevzek
   o  Joseph Yee

10.  References

10.1.  Normative References

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119,
              DOI 10.17487/RFC2119, March 1997,
              <https://www.rfc-editor.org/info/rfc2119>.

   [RFC3688]  Mealling, M., "The IETF XML Registry", BCP 81, RFC 3688,
              DOI 10.17487/RFC3688, January 2004,
              <https://www.rfc-editor.org/info/rfc3688>.

   [RFC5730]  Hollenbeck, S., "Extensible Provisioning Protocol (EPP)",
              STD 69, RFC 5730, DOI 10.17487/RFC5730, August 2009,
              <https://www.rfc-editor.org/info/rfc5730>.

   [RFC7942]  Sheffer, Y. and A. Farrel, "Improving Awareness of Running
              Code: The Implementation Status Section", BCP 205,
              RFC 7942, DOI 10.17487/RFC7942, July 2016,
              <https://www.rfc-editor.org/info/rfc7942>.

   [W3C.REC-xmlschema-2-20041028]
              Biron, P. and A. Malhotra, "XML Schema Part 2: Datatypes
              Second Edition", World Wide Web Consortium Recommendation
              REC-xmlschema-2-20041028, October 2004,
              <http://www.w3.org/TR/2004/REC-xmlschema-2-20041028>.

10.2.  Informative References

   [RFC7451]  Hollenbeck, S., "Extension Registry for the Extensible
              Provisioning Protocol", RFC 7451, DOI 10.17487/RFC7451,
              February 2015, <https://www.rfc-editor.org/info/rfc7451>.

   [RFC8174]  Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
              2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
              May 2017, <https://www.rfc-editor.org/info/rfc8174>.




Gould & Pozun              Expires May 1, 2020                 [Page 19]


Internet-Draft                  loginSec                    October 2019


10.3.  URIs

   [1] https://pages.nist.gov/800-63-3/sp800-63b.html

Appendix A.  Change History

A.1.  Change from 00 to 01

   1.  Based on the feedback from Patrick Mevzek and a proposal from
       Scott Hollenbeck, changed the minimum length of the password from
       8 to 6, revised the description of the password, and added text
       in the Security Considerations section for the server password
       length policy.

A.2.  Change from 01 to 02

   1.  Changed the XML namespace from urn:ietf:params:xml:ns:loginSec-
       0.3 to urn:ietf:params:xml:ns:epp:loginSec-0.3, and changed the
       XML schema registration from urn:ietf:params:xml:ns:loginSec-0.3
       to urn:ietf:params:xml:schema:epp:loginSec-0.3 based on a request
       from IANA with draft-ietf-regext-allocation-token.

A.3.  Change from 02 to 03

   1.  Updates based on the review by Patrick Mevzek, that include:

       1.  Fix the inconsistent case for newPW, that required a global
           change in the draft text and an update to the XML schema to
           "urn:ietf:params:xml:ns:loginSec-0.3".
       2.  Changed "contains the following child elements" to "MUST
           contain at least one of the following child elements",
           section "EPP <login> Command" to ensure that an empty
           <loginSec:loginSec> element is not passed.
       3.  Add "The client SHOULD NOT decrease the security of a new
           password by decreasing the length of the current password."
           along with an example to the "Security Considerations"
           section.

A.4.  Change from 03 to REGEXT 00

   1.  Changed to regext working group draft by changing draft-gould-
       regext-login-security to draft-ietf-regext-login-security.

A.5.  Change from REGEXT 00 to REGEXT 01

   1.  Changed the <loginSec:userAgent> element to be structured with
       the <loginSec:app>, <loginSec:tech>, and <loginSec:os> sub-
       elements.  This was based on the feedback from Martin Casanova.



Gould & Pozun              Expires May 1, 2020                 [Page 20]


Internet-Draft                  loginSec                    October 2019


       This resulted in the need to change the XML namespace from
       urn:ietf:params:xml:ns:epp:loginSec-0.3 to
       urn:ietf:params:xml:ns:epp:loginSec-0.4.

A.6.  Change from REGEXT 01 to REGEXT 02

   1.  Updated the Implementation Status section from "TBD" to include
       the Verisign EPP SDK implementation.

A.7.  Change from REGEXT 02 to REGEXT 03

   1.  Revised the description of the "duration" attribute to clarify
       that it ends when the login command was received and to clarify
       the format, based on the feedback from Martin Casanova.
   2.  Revised the sentence 'Upon a completed login command (success or
       failed), the extension MUST be included in the response based on
       the following conditions:' to 'Upon a completed login command
       (success or failed), the extension MUST be included in the
       response based on both of the following conditions:' based on the
       feedback from Patrick Mevzek.
   3.  Updates based on the review by Joseph Yee, that include:

       1.  Revised the description of the <loginSec:event> "name"
           attribute read 'Used to define a sub-type when the "type"
           attribute is not "custom" or the full type name when the
           "type" attribute is "custom"'.  The definition of the "stat"
           type was updated to 'Provides a login security statistical
           warning that MUST set the "name" attribute to the name of the
           statistic.'
       2.  Added the following sentence 'The server MUST NOT allow the
           client to set the password to the value "[LOGIN-SECURITY]".'
           to address the corner case where the constant is used as the
           password.
       3.  Revised the description of the <loginSec:userAgent> element
           to read 'The <loginSec:userAgent> element MUST contain at
           least one of the following child elements:'.
   4.  Revised the description of the <loginSec:userAgent> to match the
       child elements that can be passed, by changing "client software"
       to "client application software" and change "language" to
       "technology".
   5.  Changed the XML namespace from
       urn:ietf:params:xml:ns:epp:loginSec-0.4 to
       urn:ietf:params:xml:ns:epp:loginSec-1.0.








Gould & Pozun              Expires May 1, 2020                 [Page 21]


Internet-Draft                  loginSec                    October 2019


A.8.  Change from REGEXT 03 to REGEXT 04

   Updates based on the review by Joseph Yee, that include:

   1.  Update the definition of the "stat" security event type to
       reference sub-type to match the language for the "name"
       attribute.
   2.  Added the sentence 'The "name" attribute MUST be set when the
       "type" attribute is "stat" or "custom".' to the definition of the
       "name" attribute for clarity.
   3.  Update the definition of the "userAgentType" in the XML schema to
       require at least one sub-element using a <choice> element.

A.9.  Change from REGEXT 04 to REGEXT 05

   Updates based on the review by Barry Leiba, that include:

   1.  In section 1.1, updated to use BCP 14 boilerplate and references
       as defined in RFC 8174.
   2.  In section 1.1, change "REQUIRED" to "required".
   3.  Keep the "Migration to Newer Versions of This Extension" section
       by removing the note for removal to the RFC Editor.
   4.  In section 3.1, change "MAY be multiple events returned that
       provides information" to "MAY be multiple events returned that
       provide information".
   5.  In section 3.1, change "free form" to "free-form".
   6.  In section 3.1, change "The enumerated list of "type" values
       include:" to "The enumerated list of "type" values includes:".
   7.  In section 3.1, change "Identifies the language of the free-form
       description if the negotiated language is something other than
       the default value of "en" (English)." to "Identifies the
       negotiated language of the free-form description.  The default is
       "en" (English).
   8.  In section 3.1, change example description from "Example login
       security event for a password expiring in a week:" to "Example
       login security event for password expiration, where the current
       date is 2018-03-25:".
   9.  In section 4.1, change "Example EPP response to a successful
       login command where the password will expire in a week:" to
       "Example EPP response to a successful login command on
       2018-03-25, where the password will expire in a week:".

Authors' Addresses








Gould & Pozun              Expires May 1, 2020                 [Page 22]


Internet-Draft                  loginSec                    October 2019


   James Gould
   VeriSign, Inc.
   12061 Bluemont Way
   Reston, VA  20190
   US

   Email: jgould@verisign.com
   URI:   http://www.verisign.com


   Matthew Pozun
   VeriSign, Inc.
   12061 Bluemont Way
   Reston, VA  20190
   US

   Email: mpozun@verisign.com
   URI:   http://www.verisign.com

































Gould & Pozun              Expires May 1, 2020                 [Page 23]


Html markup produced by rfcmarkup 1.129d, available from https://tools.ietf.org/tools/rfcmarkup/