[Docs] [txt|pdf|xml|html] [Tracker] [WG] [Email] [Diff1] [Diff2] [Nits]

Versions: (draft-singh-rmcat-cc-eval) 00 01 02 03 04 05 06

RMCAT WG                                                        V. Singh
Internet-Draft                                              callstats.io
Intended status: Informational                                    J. Ott
Expires: March 26, 2017                   Technical University of Munich
                                                               S. Holmer
                                                                  Google
                                                      September 22, 2016


     Evaluating Congestion Control for Interactive Real-time Media
                   draft-ietf-rmcat-eval-criteria-06

Abstract

   The Real-time Transport Protocol (RTP) is used to transmit media in
   telephony and video conferencing applications.  This document
   describes the guidelines to evaluate new congestion control
   algorithms for interactive point-to-point real-time media.

Status of This Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at http://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on March 26, 2017.

Copyright Notice

   Copyright (c) 2016 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of



Singh, et al.            Expires March 26, 2017                 [Page 1]


Internet-Draft   Evaluating Congestion Control for RMCAT  September 2016


   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   3
   2.  Terminology . . . . . . . . . . . . . . . . . . . . . . . . .   3
   3.  Metrics . . . . . . . . . . . . . . . . . . . . . . . . . . .   3
     3.1.  RTP Log Format  . . . . . . . . . . . . . . . . . . . . .   5
   4.  List of Network Parameters  . . . . . . . . . . . . . . . . .   5
     4.1.  One-way Propagation Delay . . . . . . . . . . . . . . . .   5
     4.2.  End-to-end Loss . . . . . . . . . . . . . . . . . . . . .   5
     4.3.  DropTail Router Queue Length  . . . . . . . . . . . . . .   6
     4.4.  Loss generation model . . . . . . . . . . . . . . . . . .   6
     4.5.  Jitter models . . . . . . . . . . . . . . . . . . . . . .   6
       4.5.1.  Random Bounded PDV (RBPDV)  . . . . . . . . . . . . .   7
       4.5.2.  Approximately Random Subject to No-Reordering Bounded
               PDV         (NR-RPVD) . . . . . . . . . . . . . . . .   8
       4.5.3.  Recommended distribution  . . . . . . . . . . . . . .   9
   5.  WiFi or Cellular Links  . . . . . . . . . . . . . . . . . . .   9
   6.  Traffic Models  . . . . . . . . . . . . . . . . . . . . . . .   9
     6.1.  TCP taffic model  . . . . . . . . . . . . . . . . . . . .   9
     6.2.  RTP Video model . . . . . . . . . . . . . . . . . . . . .  10
     6.3.  Background UDP  . . . . . . . . . . . . . . . . . . . . .  10
   7.  Security Considerations . . . . . . . . . . . . . . . . . . .  10
   8.  IANA Considerations . . . . . . . . . . . . . . . . . . . . .  10
   9.  Contributors  . . . . . . . . . . . . . . . . . . . . . . . .  10
   10. Acknowledgements  . . . . . . . . . . . . . . . . . . . . . .  10
   11. References  . . . . . . . . . . . . . . . . . . . . . . . . .  11
     11.1.  Normative References . . . . . . . . . . . . . . . . . .  11
     11.2.  Informative References . . . . . . . . . . . . . . . . .  12
   Appendix A.  Application Trade-off  . . . . . . . . . . . . . . .  13
     A.1.  Measuring Quality . . . . . . . . . . . . . . . . . . . .  13
   Appendix B.  Change Log . . . . . . . . . . . . . . . . . . . . .  13
     B.1.  Changes in draft-ietf-rmcat-eval-criteria-06  . . . . . .  13
     B.2.  Changes in draft-ietf-rmcat-eval-criteria-05  . . . . . .  13
     B.3.  Changes in draft-ietf-rmcat-eval-criteria-04  . . . . . .  13
     B.4.  Changes in draft-ietf-rmcat-eval-criteria-03  . . . . . .  13
     B.5.  Changes in draft-ietf-rmcat-eval-criteria-02  . . . . . .  13
     B.6.  Changes in draft-ietf-rmcat-eval-criteria-01  . . . . . .  14
     B.7.  Changes in draft-ietf-rmcat-eval-criteria-00  . . . . . .  14
     B.8.  Changes in draft-singh-rmcat-cc-eval-04 . . . . . . . . .  14
     B.9.  Changes in draft-singh-rmcat-cc-eval-03 . . . . . . . . .  14
     B.10. Changes in draft-singh-rmcat-cc-eval-02 . . . . . . . . .  14
     B.11. Changes in draft-singh-rmcat-cc-eval-01 . . . . . . . . .  15
   Authors' Addresses  . . . . . . . . . . . . . . . . . . . . . . .  15





Singh, et al.            Expires March 26, 2017                 [Page 2]


Internet-Draft   Evaluating Congestion Control for RMCAT  September 2016


1.  Introduction

   This memo describes the guidelines to help with evaluating new
   congestion control algorithms for interactive point-to-point real
   time media.  The requirements for the congestion control algorithm
   are outlined in [I-D.ietf-rmcat-cc-requirements]).  This document
   builds upon previous work at the IETF: Specifying New Congestion
   Control Algorithms [RFC5033] and Metrics for the Evaluation of
   Congestion Control Algorithms [RFC5166].

   The guidelines proposed in the document are intended to help prevent
   a congestion collapse, promote fair capacity usage and optimize the
   media flow's throughput.  Furthermore, the proposed algorithms are
   expected to operate within the envelope of the circuit breakers
   defined in [I-D.ietf-avtcore-rtp-circuit-breakers].

   This document only provides broad-level criteria for evaluating a new
   congestion control algorithm.  The minimal requirement for RMCAT
   proposals is to produce or present results for the test scenarios
   described in [I-D.ietf-rmcat-eval-test] (Basic Test Cases).
   Additionally, proponents may produce evaluation results for the
   wireless test scenarios [I-D.ietf-rmcat-wireless-tests].

2.  Terminology

   The terminology defined in RTP [RFC3550], RTP Profile for Audio and
   Video Conferences with Minimal Control [RFC3551], RTCP Extended
   Report (XR) [RFC3611], Extended RTP Profile for RTCP-based Feedback
   (RTP/AVPF) [RFC4585] and Support for Reduced-Size RTCP [RFC5506]
   apply.

3.  Metrics

   Each experiment is expected to log every incoming and outgoing packet
   (the RTP logging format is described in Section 3.1).  The logging
   can be done inside the application or at the endpoints using PCAP
   (packet capture, e.g., tcpdump, wireshark).  The following are
   calculated based on the information in the packet logs:

   1.   Sending rate, Receiver rate, Goodput (measured at 200ms
        intervals)

   2.   Packets sent, Packets received

   3.   Bytes sent, bytes received

   4.   Packet delay




Singh, et al.            Expires March 26, 2017                 [Page 3]


Internet-Draft   Evaluating Congestion Control for RMCAT  September 2016


   5.   Packets lost, Packets discarded (from the playout or de-jitter
        buffer)

   6.   If using, retransmission or FEC: post-repair loss

   7.   Fairness or Unfairness: Experiments testing the performance of
        an RMCAT proposal against any cross-traffic must define its
        expected criteria for fairness.  The "unfairness" test guideline
        (measured at 1s intervals) is:
        1.  Does not trigger the circuit breaker.
        2.  No RMCAT stream achieves more than 3 times the average
        throughput of the RMCAT stream with the lowest average
        throughput, for a case when the competing streams have similar
        RTTs.
        3.  RTT should not grow by a factor of 3 for the existing flows
        when a new flow is added.
        For example, see the test scenarios described in
        [I-D.ietf-rmcat-eval-test].

   8.   Convergence time: The time taken to reach a stable rate at
        startup, after the available link capacity changes, or when new
        flows get added to the bottleneck link.

   9.   Instability or oscillation in the sending rate: The frequency or
        number of instances when the sending rate oscillates between an
        high watermark level and a low watermark level, or vice-versa in
        a defined time window.  For example, the watermarks can be set
        at 4x interval: 500 Kbps, 2 Mbps, and a time window of 500ms.

   10.  [Editor's note: Section 3, in [I-D.ietf-netvc-testing] contains
        objective Metrics for evaluating codecs.]

   11.  Bandwidth Utilization, defined as ratio of the instantaneous
        sending rate to the instantaneous bottleneck capacity.  This
        metric is useful only when an RMCAT flow is by itself or
        competing with similar cross-traffic.

   From the logs the statistical measures (min, max, mean, standard
   deviation and variance) for the whole duration or any specific part
   of the session can be calculated.  Also the metrics (sending rate,
   receiver rate, goodput, latency) can be visualized in graphs as
   variation over time, the measurements in the plot are at 1 second
   intervals.  Additionally, from the logs it is possible to plot the
   histogram or CDF of packet delay.

   [Open issue (1): Using Jain-fairness index (JFI) for measuring self-
   fairness between RTP flows? measured at what intervals? visualized as




Singh, et al.            Expires March 26, 2017                 [Page 4]


Internet-Draft   Evaluating Congestion Control for RMCAT  September 2016


   a CDF or a timeseries?  Additionally: Use JFI for comparing fairness
   between RTP and long TCP flows? ]

3.1.  RTP Log Format

   The log file is tab or comma separated containing the following
   details:

           Send or receive timestamp (unix)
           RTP payload type
           SSRC
           RTP sequence no
           RTP timestamp
           marker bit
           payload size

   If the congestion control implements, retransmissions or FEC, the
   evaluation should report both packet loss (before applying error-
   resilience) and residual packet loss (after applying error-
   resilience).

4.  List of Network Parameters

   The implementors initially are encouraged to choose evaluation
   settings from the following values:

4.1.  One-way Propagation Delay

   Experiments are expected to verify that the congestion control is
   able to work in challenging situations, for example over trans-
   continental and/or satellite links.  Typical values are:

   1.  Very low latency: 0-1ms

   2.  Low latency: 50ms

   3.  High latency: 150ms

   4.  Extreme latency: 300ms

4.2.  End-to-end Loss

   To model lossy links, the experiments can choose one of the following
   loss rates, the fractional loss is the ratio of packets lost and
   packets sent.

   1.  no loss: 0%




Singh, et al.            Expires March 26, 2017                 [Page 5]


Internet-Draft   Evaluating Congestion Control for RMCAT  September 2016


   2.  1%

   3.  5%

   4.  10%

   5.  20%

4.3.  DropTail Router Queue Length

   The router queue length is measured as the time taken to drain the
   FIFO queue.  It has been noted in various discussions that the queue
   length in the current deployed Internet varies significantly.  While
   the core backbone network has very short queue length, the home
   gateways usually have larger queue length.  Those various queue
   lengths can be categorized in the following way:

   1.  QoS-aware (or short): 70ms

   2.  Nominal: 300-500ms

   3.  Buffer-bloated: 1000-2000ms

   Here the size of the queue is measured in bytes or packets and to
   convert the queue length measured in seconds to queue length in
   bytes:

   QueueSize (in bytes) = QueueSize (in sec) x Throughput (in bps)/8

4.4.  Loss generation model

   [Open Issue: Describes the model for generating packet losses, for
   example, losses can be generated using traces, or using the Gilbert-
   Elliot model, or randomly (uncorrelated loss).]

4.5.  Jitter models

   This section defines jitter models for the purposes of this document.
   When jitter is to be applied to both the RMCAT flow and any competing
   flow (such as a TCP competing flow), the competing flow will use the
   jitter definition below that does not allow for re-ordering of
   packets on the competing flow (see NR-RBPDV definition below).

   Jitter is an overloaded term in communications.  Its meaning is
   typically associated with the variation of a metric (e.g., delay)
   with respect to some reference metric (e.g., average delay or minimum
   delay).  For example, RFC 3550 jitter is a smoothed estimate of




Singh, et al.            Expires March 26, 2017                 [Page 6]


Internet-Draft   Evaluating Congestion Control for RMCAT  September 2016


   jitter which is particularly meaningful if the underlying packet
   delay variation was caused by a Gaussian random process.

   Because jitter is an overloaded term, we instead use the term Packet
   Delay Variation (PDV) to describe the variation of delay of
   individual packets in the same sense as the IETF IPPM WG has defined
   PDV in their documents (e.g., RFC 3393) and as the ITU-T SG16 has
   defined IP Packet Delay Variation (IPDV) in their documents (e.g.,
   Y.1540).

   Most PDV distributions in packet network systems are one-sided
   distributions (the measurement of which with a finite number of
   measurement samples result in one-sided histograms).  In the usual
   packet network transport case there is typically one packet that
   transited the network with the minimum delay, then a majority of
   packets also transit the system within some variation from this
   minimum delay, and then a minority of the packets transit the network
   with delays higher than the median or average transit time (these are
   outliers).  Although infrequent, outliers can cause significant
   deleterious operation in adaptive systems and should be considered in
   RMCAT adaptation designs.

   In this section we define two different bounded PDV characteristics,
   1) Random Bounded PDV and 2) Approximately Random Subject to No-
   Reordering Bounded PDV.

   [Open issue: which one is used in evaluations?  Are both used?]

4.5.1.  Random Bounded PDV (RBPDV)

   The RBPDV probability distribution function (pdf) is specified to be
   of some mathematically describable function which includes some
   practical minimum and maximum discrete values suitable for testing.
   For example, the minimum value, x_min, might be specified as the
   minimum transit time packet and the maximum value, x_max, might be
   idefined to be two standard deviations higher than the mean.

   Since we are typically interested in the distribution relative to the
   mean delay packet, we define the zero mean PDV sample, z(n), to be
   z(n) = x(n) - x_mean, where x(n) is a sample of the RBPDV random
   variable x and x_mean is the mean of x.

   We assume here that s(n) is the original source time of packet n and
   the post-jitter induced emmission time, j(n), for packet n is j(n) =
   {[z(n) + x_mean] + s(n)}. It follows that the separation in the post-
   jitter time of packets n and n+1 is {[s(n+1)-s(n)] - [z(n)-z(n+1)]}.
   Since the first term is always a positive quantity, we note that
   packet reordering at the receiver is possible whenever the second



Singh, et al.            Expires March 26, 2017                 [Page 7]


Internet-Draft   Evaluating Congestion Control for RMCAT  September 2016


   term is greater than the first.  Said another way, whenever the
   difference in possible zero mean PDV sample delays (i.e., [x_max-
   x_min]) exceeds the inter-departure time of any two sent packets, we
   have the possibility of packet re-ordering.

   There are important use cases in real networks where packets can
   become re-ordered such as in load balancing topologies and during
   route changes.  However, for the vast majority of cases there is no
   packet re-ordering because most of the time packets follow the same
   path.  Due to this, if a packet becomes overly delayed, the packets
   after it on that flow are also delayed.  This is especially true for
   mobile wireless links where there are per-flow queues prior to base
   station scheduling.  Owing to this important use case, we define
   another PDV profile similar to the above, but one that does not allow
   for re-ordering within a flow.

4.5.2.  Approximately Random Subject to No-Reordering Bounded PDV (NR-
        RPVD)

   No Reordering RPDV, NR-RPVD, is defined similarly to the above with
   one important exception.  Let serial(n) be defined as the
   serialization delay of packet n at the lowest bottleneck link rate
   (or other appropriate rate) in a given test.  Then we produce all the
   post-jitter values for j(n) for n = 1, 2, ... N, where N is the
   length of the source sequence s to be offset-ed.  The exception can
   be stated as follows: We revisit all j(n) beginning from index n=2,
   and if j(n) is determined to be less than [j(n-1)+serial(n-1)], we
   redefine j(n) to be equal to [j(n-1)+serial(n-1)] and continue for
   all remaining n (i.e., n = 3, 4, .. N).  This models the case where
   the packet n is sent immediately after packet (n-1) at the bottleneck
   link rate.  Although this is generally the theoretical minimum in
   that it assumes that no other packets from other flows are in-between
   packet n and n+1 at the bottleneck link, it is a reasonable
   assumption for per flow queuing.

   We note that this assumption holds for some important exception
   cases, such as packets immediately following outliers.  There are a
   multitude of software controlled elements common on end-to-end
   Internet paths (such as firewalls, ALGs and other middleboxes) which
   stop processing packets while servicing other functions (e.g.,
   garbage collection).  Often these devices do not drop packets, but
   rather queue them for later processing and cause many of the
   outliers.  Thus NR-RPVD models this particular use case (assuming
   serial(n+1) is defined appropriately for the device causing the
   outlier) and thus is believed to be important for adaptation
   development for RMCAT.





Singh, et al.            Expires March 26, 2017                 [Page 8]


Internet-Draft   Evaluating Congestion Control for RMCAT  September 2016


4.5.3.  Recommended distribution

   It is recommended that z(n) is distributed according to a truncated
   Gaussian:

   z(n) ~ |max(min(N(0, std^2), N_STD * std), -N_STD * std)|

   where N(0, std^2) is the Gaussian distribution with zero mean and
   standard deviation std.  Recommended values:

   o  std = 5 ms

   o  N_STD = 3

5.  WiFi or Cellular Links

   [I-D.ietf-rmcat-wireless-tests] describes the test cases to simulate
   networks with wireless links.  The document describes mechanism to
   simulate both cellular and WiFi networks.

6.  Traffic Models

6.1.  TCP taffic model

   Long-lived TCP flows will download data throughout the session and
   are expected to have infinite amount of data to send or receive.  For
   example, to

   Each short TCP flow is modeled as a sequence of file downloads
   interleaved with idle periods.  Not all short TCPs start at the same
   time, i.e., some start in the ON state while others start in the OFF
   state.

   The short TCP flows can be modelled as follows: 30 connections start
   simultaneously fetching small (30-50 KB) amounts of data.  This
   covers the case where the short TCP flows are not fetching a video
   file.

   The idle period between bursts of starting a group of TCP flows is
   typically derived from an exponential distribution with the mean
   value of 10 seconds.

   [These values were picked based on the data available at
   http://httparchive.org/interesting.php as of October 2015].







Singh, et al.            Expires March 26, 2017                 [Page 9]


Internet-Draft   Evaluating Congestion Control for RMCAT  September 2016


6.2.  RTP Video model

   [I-D.ietf-rmcat-video-traffic-model] describes two types of video
   traffic models for evaluating RMCAT candidate algorithms.  The first
   model statistically characterizes the behavior of a video encoder.
   Whereas the second model uses video traces.

   For example, test sequences are available at: [xiph-seq] and
   [HEVC-seq].  The currently chosen video streams are: Foreman and
   FourPeople.

6.3.  Background UDP

   Background UDP flow is modeled as a constant bit rate (CBR) flow.  It
   will download data at a particular CBR rate for the complete session,
   or will change to particular CBR rate at predefined intervals.  The
   inter packet interval is calculated based on the CBR and the packet
   size (is typically set to the path MTU size, the default value can be
   1500 bytes).

7.  Security Considerations

   Security issues have not been discussed in this memo.

8.  IANA Considerations

   There are no IANA impacts in this memo.

9.  Contributors

   The content and concepts within this document are a product of the
   discussion carried out in the Design Team.

   Michael Ramalho provided the text for the Jitter model.

10.  Acknowledgements

   Much of this document is derived from previous work on congestion
   control at the IETF.

   The authors would like to thank Harald Alvestrand, Anna Brunstrom,
   Luca De Cicco, Wesley Eddy, Lars Eggert, Kevin Gross, Vinayak Hegde,
   Stefan Holmer, Randell Jesup, Mirja Kuehlewind, Karen Nielsen, Piers
   O'Hanlon, Colin Perkins, Michael Ramalho, Zaheduzzaman Sarker,
   Timothy B.  Terriberry, Michael Welzl, and Mo Zanaty for providing
   valuable feedback on earlier versions of this draft.  Additionally,
   also thank the participants of the design team for their comments and
   discussion related to the evaluation criteria.



Singh, et al.            Expires March 26, 2017                [Page 10]


Internet-Draft   Evaluating Congestion Control for RMCAT  September 2016


11.  References

11.1.  Normative References

   [RFC3550]  Schulzrinne, H., Casner, S., Frederick, R., and V.
              Jacobson, "RTP: A Transport Protocol for Real-Time
              Applications", STD 64, RFC 3550, DOI 10.17487/RFC3550,
              July 2003, <http://www.rfc-editor.org/info/rfc3550>.

   [RFC3551]  Schulzrinne, H. and S. Casner, "RTP Profile for Audio and
              Video Conferences with Minimal Control", STD 65, RFC 3551,
              DOI 10.17487/RFC3551, July 2003,
              <http://www.rfc-editor.org/info/rfc3551>.

   [RFC3611]  Friedman, T., Ed., Caceres, R., Ed., and A. Clark, Ed.,
              "RTP Control Protocol Extended Reports (RTCP XR)", RFC
              3611, DOI 10.17487/RFC3611, November 2003,
              <http://www.rfc-editor.org/info/rfc3611>.

   [RFC4585]  Ott, J., Wenger, S., Sato, N., Burmeister, C., and J. Rey,
              "Extended RTP Profile for Real-time Transport Control
              Protocol (RTCP)-Based Feedback (RTP/AVPF)", RFC 4585, DOI
              10.17487/RFC4585, July 2006,
              <http://www.rfc-editor.org/info/rfc4585>.

   [RFC5506]  Johansson, I. and M. Westerlund, "Support for Reduced-Size
              Real-Time Transport Control Protocol (RTCP): Opportunities
              and Consequences", RFC 5506, DOI 10.17487/RFC5506, April
              2009, <http://www.rfc-editor.org/info/rfc5506>.

   [I-D.ietf-rmcat-cc-requirements]
              Jesup, R. and Z. Sarker, "Congestion Control Requirements
              for Interactive Real-Time Media", draft-ietf-rmcat-cc-
              requirements-09 (work in progress), December 2014.

   [I-D.ietf-avtcore-rtp-circuit-breakers]
              Perkins, C. and V. Varun, "Multimedia Congestion Control:
              Circuit Breakers for Unicast RTP Sessions", draft-ietf-
              avtcore-rtp-circuit-breakers-14 (work in progress), March
              2016.

   [I-D.ietf-rmcat-wireless-tests]
              Sarker, Z., Johansson, I., Zhu, X., Fu, J., Tan, W., and
              M. Ramalho, "Evaluation Test Cases for Interactive Real-
              Time Media over Wireless Networks", draft-ietf-rmcat-
              wireless-tests-01 (work in progress), November 2015.





Singh, et al.            Expires March 26, 2017                [Page 11]


Internet-Draft   Evaluating Congestion Control for RMCAT  September 2016


11.2.  Informative References

   [RFC5033]  Floyd, S. and M. Allman, "Specifying New Congestion
              Control Algorithms", BCP 133, RFC 5033, DOI 10.17487/
              RFC5033, August 2007,
              <http://www.rfc-editor.org/info/rfc5033>.

   [RFC5166]  Floyd, S., Ed., "Metrics for the Evaluation of Congestion
              Control Mechanisms", RFC 5166, DOI 10.17487/RFC5166, March
              2008, <http://www.rfc-editor.org/info/rfc5166>.

   [RFC5681]  Allman, M., Paxson, V., and E. Blanton, "TCP Congestion
              Control", RFC 5681, DOI 10.17487/RFC5681, September 2009,
              <http://www.rfc-editor.org/info/rfc5681>.

   [I-D.ietf-rmcat-eval-test]
              Sarker, Z., Varun, V., Zhu, X., and M. Ramalho, "Test
              Cases for Evaluating RMCAT Proposals", draft-ietf-rmcat-
              eval-test-03 (work in progress), March 2016.

   [I-D.ietf-rmcat-video-traffic-model]
              Zhu, X., Cruz, S., and Z. Sarker, "Modeling Video Traffic
              Sources for RMCAT Evaluations", draft-ietf-rmcat-video-
              traffic-model-00 (work in progress), January 2016.

   [I-D.ietf-netvc-testing]
              Daede, T., Norkin, A., and I. Brailovskiy, "Video Codec
              Testing and Quality Measurement", draft-ietf-netvc-
              testing-03 (work in progress), July 2016.

   [SA4-LR]   S4-050560, 3GPP., "Error Patterns for MBMS Streaming over
              UTRAN and GERAN", 3GPP S4-050560, 5 2008.

   [TCP-eval-suite]
              Lachlan, A., Marcondes, C., Floyd, S., Dunn, L., Guillier,
              R., Gang, W., Eggert, L., Ha, S., and I. Rhee, "Towards a
              Common TCP Evaluation Suite", Proc. PFLDnet. 2008, August
              2008.

   [xiph-seq]
              Daede, T., "Video Test Media Set",
              https://people.xiph.org/~tdaede/sets/ , .

   [HEVC-seq]
              HEVC, , "Test Sequences",
              http://www.netlab.tkk.fi/~varun/test_sequences/ , .





Singh, et al.            Expires March 26, 2017                [Page 12]


Internet-Draft   Evaluating Congestion Control for RMCAT  September 2016


Appendix A.  Application Trade-off

   Application trade-off is yet to be defined. see RMCAT requirements
   [I-D.ietf-rmcat-cc-requirements] document.  Perhaps each experiment
   should define the application's expectation or trade-off.

A.1.  Measuring Quality

   No quality metric is defined for performance evaluation, it is
   currently an open issue.  However, there is consensus that congestion
   control algorithm should be able to show that it is useful for
   interactive video by performing analysis using a real codec and video
   sequences.

Appendix B.  Change Log

   Note to the RFC-Editor: please remove this section prior to
   publication as an RFC.

B.1.  Changes in draft-ietf-rmcat-eval-criteria-06

   o  Updated Jitter.

B.2.  Changes in draft-ietf-rmcat-eval-criteria-05

   o  Improved text surrounding wireless tests, video sequences, and
      short-TCP model.

B.3.  Changes in draft-ietf-rmcat-eval-criteria-04

   o  Removed the guidelines section, as most of the sections are now
      covered: wireless tests, video model, etc.

   o  Improved Short TCP model based on the suggestion to use
      httparchive.org.

B.4.  Changes in draft-ietf-rmcat-eval-criteria-03

   o  Keep-alive version.

   o  Moved link parameters and traffic models from eval-test

B.5.  Changes in draft-ietf-rmcat-eval-criteria-02

   o  Incorporated fairness test as a working test.

   o  Updated text on mimimum evaluation requirements.




Singh, et al.            Expires March 26, 2017                [Page 13]


Internet-Draft   Evaluating Congestion Control for RMCAT  September 2016


B.6.  Changes in draft-ietf-rmcat-eval-criteria-01

   o  Removed Appendix B.

   o  Removed Section on Evaluation Parameters.

B.7.  Changes in draft-ietf-rmcat-eval-criteria-00

   o  Updated references.

   o  Resubmitted as WG draft.

B.8.  Changes in draft-singh-rmcat-cc-eval-04

   o  Incorporate feedback from IETF 87, Berlin.

   o  Clarified metrics: convergence time, bandwidth utilization.

   o  Changed fairness criteria to fairness test.

   o  Added measuring pre- and post-repair loss.

   o  Added open issue of measuring video quality to appendix.

   o  clarified use of DropTail and AQM.

   o  Updated text in "Minimum Requirements for Evaluation"

B.9.  Changes in draft-singh-rmcat-cc-eval-03

   o  Incorporate the discussion within the design team.

   o  Added a section on evaluation parameters, it describes the flow
      and network characteristics.

   o  Added Appendix with self-fairness experiment.

   o  Changed bottleneck parameters from a proposal to an example set.

   o

B.10.  Changes in draft-singh-rmcat-cc-eval-02

   o  Added scenario descriptions.







Singh, et al.            Expires March 26, 2017                [Page 14]


Internet-Draft   Evaluating Congestion Control for RMCAT  September 2016


B.11.  Changes in draft-singh-rmcat-cc-eval-01

   o  Removed QoE metrics.

   o  Changed stability to steady-state.

   o  Added measuring impact against few and many flows.

   o  Added guideline for idle and data-limited periods.

   o  Added reference to TCP evaluation suite in example evaluation
      scenarios.

Authors' Addresses

   Varun Singh
   CALLSTATS I/O Oy
   Runeberginkatu 4c A 4
   Helsinki  00100
   Finland

   Email: varun@callstats.io
   URI:   https://www.callstats.io/about


   Joerg Ott
   Technical University of Munich
   Faculty of Informatics
   Boltzmannstrasse 3
   Garching bei Muenchen, DE  85748
   Germany

   Email: ott@in.tum.de


   Stefan Holmer
   Google
   Kungsbron 2
   Stockholm  11122
   Sweden

   Email: holmer@google.com









Singh, et al.            Expires March 26, 2017                [Page 15]


Html markup produced by rfcmarkup 1.121, available from https://tools.ietf.org/tools/rfcmarkup/