[Docs] [txt|pdf|xml|html] [Tracker] [WG] [Email] [Diff1] [Diff2] [Nits]

Versions: (draft-rescorla-rtcweb-security) 00 01 02 03 04 05 06 07 08 09 10 11

RTC-Web                                                      E. Rescorla
Internet-Draft                                                RTFM, Inc.
Intended status:  Standards Track                       October 30, 2011
Expires:  May 2, 2012


                  Security Considerations for RTC-Web
                     draft-ietf-rtcweb-security-01

Abstract

   The Real-Time Communications on the Web (RTC-Web) working group is
   tasked with standardizing protocols for real-time communications
   between Web browsers.  The major use cases for RTC-Web technology are
   real-time audio and/or video calls, Web conferencing, and direct data
   transfer.  Unlike most conventional real-time systems (e.g., SIP-
   based soft phones) RTC-Web communications are directly controlled by
   some Web server, which poses new security challenges.  For instance,
   a Web browser might expose a JavaScript API which allows a server to
   place a video call.  Unrestricted access to such an API would allow
   any site which a user visited to "bug" a user's computer, capturing
   any activity which passed in front of their camera.  This document
   defines the RTC-Web threat model and defines an architecture which
   provides security within that threat model.

Legal

   THIS DOCUMENT AND THE INFORMATION CONTAINED THEREIN ARE PROVIDED ON
   AN "AS IS" BASIS AND THE CONTRIBUTOR, THE ORGANIZATION HE/SHE
   REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE
   IETF TRUST, AND THE INTERNET ENGINEERING TASK FORCE, DISCLAIM ALL
   WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY
   WARRANTY THAT THE USE OF THE INFORMATION THEREIN WILL NOT INFRINGE
   ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS
   FOR A PARTICULAR PURPOSE.

Status of this Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at http://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any



Rescorla                   Expires May 2, 2012                  [Page 1]


Internet-Draft              RTC-Web Security                October 2011


   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on May 2, 2012.

Copyright Notice

   Copyright (c) 2011 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

   This document may contain material from IETF Documents or IETF
   Contributions published or made publicly available before November
   10, 2008.  The person(s) controlling the copyright in some of this
   material may not have granted the IETF Trust the right to allow
   modifications of such material outside the IETF Standards Process.
   Without obtaining an adequate license from the person(s) controlling
   the copyright in such materials, this document may not be modified
   outside the IETF Standards Process, and derivative works of it may
   not be created outside the IETF Standards Process, except to format
   it for publication as an RFC or to translate it into languages other
   than English.




















Rescorla                   Expires May 2, 2012                  [Page 2]


Internet-Draft              RTC-Web Security                October 2011


Table of Contents

   1.  Introduction . . . . . . . . . . . . . . . . . . . . . . . . .  5
   2.  Terminology  . . . . . . . . . . . . . . . . . . . . . . . . .  6
   3.  The Browser Threat Model . . . . . . . . . . . . . . . . . . .  6
     3.1.  Access to Local Resources  . . . . . . . . . . . . . . . .  7
     3.2.  Same Origin Policy . . . . . . . . . . . . . . . . . . . .  7
     3.3.  Bypassing SOP: CORS, WebSockets, and consent to
           communicate  . . . . . . . . . . . . . . . . . . . . . . .  8
   4.  Security for RTC-Web Applications  . . . . . . . . . . . . . .  8
     4.1.  Access to Local Devices  . . . . . . . . . . . . . . . . .  8
       4.1.1.  Calling Scenarios and User Expectations  . . . . . . .  9
         4.1.1.1.  Dedicated Calling Services . . . . . . . . . . . .  9
         4.1.1.2.  Calling the Site You're On . . . . . . . . . . . .  9
         4.1.1.3.  Calling to an Ad Target  . . . . . . . . . . . . . 10
       4.1.2.  Origin-Based Security  . . . . . . . . . . . . . . . . 10
       4.1.3.  Security Properties of the Calling Page  . . . . . . . 12
     4.2.  Communications Consent Verification  . . . . . . . . . . . 13
       4.2.1.  ICE  . . . . . . . . . . . . . . . . . . . . . . . . . 13
       4.2.2.  Masking  . . . . . . . . . . . . . . . . . . . . . . . 14
       4.2.3.  Backward Compatibility . . . . . . . . . . . . . . . . 14
       4.2.4.  IP Location Privacy  . . . . . . . . . . . . . . . . . 15
     4.3.  Communications Security  . . . . . . . . . . . . . . . . . 15
       4.3.1.  Protecting Against Retrospective Compromise  . . . . . 16
       4.3.2.  Protecting Against During-Call Attack  . . . . . . . . 17
         4.3.2.1.  Key Continuity . . . . . . . . . . . . . . . . . . 17
         4.3.2.2.  Short Authentication Strings . . . . . . . . . . . 18
         4.3.2.3.  Recommendations  . . . . . . . . . . . . . . . . . 19
   5.  Security Considerations  . . . . . . . . . . . . . . . . . . . 19
   6.  Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . 19
   7.  References . . . . . . . . . . . . . . . . . . . . . . . . . . 19
     7.1.  Normative References . . . . . . . . . . . . . . . . . . . 19
     7.2.  Informative References . . . . . . . . . . . . . . . . . . 20
   Appendix A.  A Proposed Security Architecture [No Consensus on
                This] . . . . . . . . . . . . . . . . . . . . . . . . 22
     A.1.  Trust Hierarchy  . . . . . . . . . . . . . . . . . . . . . 22
       A.1.1.  Authenticated Entities . . . . . . . . . . . . . . . . 22
       A.1.2.  Unauthenticated Entities . . . . . . . . . . . . . . . 23
     A.2.  Overview . . . . . . . . . . . . . . . . . . . . . . . . . 23
       A.2.1.  Initial Signaling  . . . . . . . . . . . . . . . . . . 24
       A.2.2.  Media Consent Verification . . . . . . . . . . . . . . 26
       A.2.3.  DTLS Handshake . . . . . . . . . . . . . . . . . . . . 26
       A.2.4.  Communications and Consent Freshness . . . . . . . . . 27
     A.3.  Detailed Technical Description . . . . . . . . . . . . . . 27
       A.3.1.  Origin and Web Security Issues . . . . . . . . . . . . 27
       A.3.2.  Device Permissions Model . . . . . . . . . . . . . . . 28
       A.3.3.  Communications Consent . . . . . . . . . . . . . . . . 29
       A.3.4.  IP Location Privacy  . . . . . . . . . . . . . . . . . 29



Rescorla                   Expires May 2, 2012                  [Page 3]


Internet-Draft              RTC-Web Security                October 2011


       A.3.5.  Communications Security  . . . . . . . . . . . . . . . 30
       A.3.6.  Web-Based Peer Authentication  . . . . . . . . . . . . 31
         A.3.6.1.  Generic Concepts . . . . . . . . . . . . . . . . . 31
         A.3.6.2.  BrowserID  . . . . . . . . . . . . . . . . . . . . 32
         A.3.6.3.  OAuth  . . . . . . . . . . . . . . . . . . . . . . 35
         A.3.6.4.  Generic Identity Support . . . . . . . . . . . . . 36
   Author's Address . . . . . . . . . . . . . . . . . . . . . . . . . 36












































Rescorla                   Expires May 2, 2012                  [Page 4]


Internet-Draft              RTC-Web Security                October 2011


1.  Introduction

   The Real-Time Communications on the Web (RTC-Web) working group is
   tasked with standardizing protocols for real-time communications
   between Web browsers.  The major use cases for RTC-Web technology are
   real-time audio and/or video calls, Web conferencing, and direct data
   transfer.  Unlike most conventional real-time systems, (e.g., SIP-
   based[RFC3261] soft phones) RTC-Web communications are directly
   controlled by some Web server.  A simple case is shown below.

                               +----------------+
                               |                |
                               |   Web Server   |
                               |                |
                               +----------------+
                                   ^        ^
                                  /          \
                          HTTP   /            \   HTTP
                                /              \
                               /                \
                              v                  v
                           JS API              JS API
                     +-----------+            +-----------+
                     |           |    Media   |           |
                     |  Browser  |<---------->|  Browser  |
                     |           |            |           |
                     +-----------+            +-----------+

                     Figure 1: A simple RTC-Web system

   In the system shown in Figure 1, Alice and Bob both have RTC-Web
   enabled browsers and they visit some Web server which operates a
   calling service.  Each of their browsers exposes standardized
   JavaScript calling APIs which are used by the Web server to set up a
   call between Alice and Bob. While this system is topologically
   similar to a conventional SIP-based system (with the Web server
   acting as the signaling service and browsers acting as softphones),
   control has moved to the central Web server; the browser simply
   provides API points that are used by the calling service.  As with
   any Web application, the Web server can move logic between the server
   and JavaScript in the browser, but regardless of where the code is
   executing, it is ultimately under control of the server.

   It should be immediately apparent that this type of system poses new
   security challenges beyond those of a conventional VoIP system.  In
   particular, it needs to contend with malicious calling services.  For
   example, if the calling service can cause the browser to make a call
   at any time to any callee of its choice, then this facility can be



Rescorla                   Expires May 2, 2012                  [Page 5]


Internet-Draft              RTC-Web Security                October 2011


   used to bug a user's computer without their knowledge, simply by
   placing a call to some recording service.  More subtly, if the
   exposed APIs allow the server to instruct the browser to send
   arbitrary content, then they can be used to bypass firewalls or mount
   denial of service attacks.  Any successful system will need to be
   resistant to this and other attacks.


2.  Terminology

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in RFC 2119 [RFC2119].


3.  The Browser Threat Model

   The security requirements for RTC-Web follow directly from the
   requirement that the browser's job is to protect the user.  Huang et
   al. [huang-w2sp] summarize the core browser security guarantee as:

      Users can safely visit arbitrary web sites and execute scripts
      provided by those sites.

   It is important to realize that this includes sites hosting arbitrary
   malicious scripts.  The motivation for this requirement is simple:
   it is trivial for attackers to divert users to sites of their choice.
   For instance, an attacker can purchase display advertisements which
   direct the user (either automatically or via user clicking) to their
   site, at which point the browser will execute the attacker's scripts.
   Thus, it is important that it be safe to view arbitrarily malicious
   pages.  Of course, browsers inevitably have bugs which cause them to
   fall short of this goal, but any new RTC-Web functionality must be
   designed with the intent to meet this standard.  The remainder of
   this section provides more background on the existing Web security
   model.

   In this model, then, the browser acts as a TRUSTED COMPUTING BASE
   (TCB) both from the user's perspective and to some extent from the
   server's.  While HTML and JS provided by the server can cause the
   browser to execute a variety of actions, those scripts operate in a
   sandbox that isolates them both from the user's computer and from
   each other, as detailed below.

   Conventionally, we refer to either WEB ATTACKERS, who are able to
   induce you to visit their sites but do not control the network, and
   NETWORK ATTACKERS, who are able to control your network.  Network
   attackers correspond to the [RFC3552] "Internet Threat Model".  In



Rescorla                   Expires May 2, 2012                  [Page 6]


Internet-Draft              RTC-Web Security                October 2011


   general, it is desirable to build a system which is secure against
   both kinds of attackers, but realistically many sites do not run
   HTTPS [RFC2818] and so our ability to defend against network
   attackers is necessarily somewhat limited.  Most of the rest of this
   section is devoted to web attackers, with the assumption that
   protection against network attackers is provided by running HTTPS.

3.1.  Access to Local Resources

   While the browser has access to local resources such as keying
   material, files, the camera and the microphone, it strictly limits or
   forbids web servers from accessing those same resources.  For
   instance, while it is possible to produce an HTML form which will
   allow file upload, a script cannot do so without user consent and in
   fact cannot even suggest a specific file (e.g., /etc/passwd); the
   user must explicitly select the file and consent to its upload.
   [Note:  in many cases browsers are explicitly designed to avoid
   dialogs with the semantics of "click here to screw yourself", as
   extensive research shows that users are prone to consent under such
   circumstances.]

   Similarly, while Flash SWFs can access the camera and microphone,
   they explicitly require that the user consent to that access.  In
   addition, some resources simply cannot be accessed from the browser
   at all.  For instance, there is no real way to run specific
   executables directly from a script (though the user can of course be
   induced to download executable files and run them).

3.2.  Same Origin Policy

   Many other resources are accessible but isolated.  For instance,
   while scripts are allowed to make HTTP requests via the
   XMLHttpRequest() API those requests are not allowed to be made to any
   server, but rather solely to the same ORIGIN from whence the script
   came.[I-D.abarth-origin] (although CORS [CORS] and WebSockets
   [I-D.ietf-hybi-thewebsocketprotocol] provides a escape hatch from
   this restriction, as described below.)  This SAME ORIGIN POLICY (SOP)
   prevents server A from mounting attacks on server B via the user's
   browser, which protects both the user (e.g., from misuse of his
   credentials) and the server (e.g., from DoS attack).

   More generally, SOP forces scripts from each site to run in their
   own, isolated, sandboxes.  While there are techniques to allow them
   to interact, those interactions generally must be mutually consensual
   (by each site) and are limited to certain channels.  For instance,
   multiple pages/browser panes from the same origin can read each
   other's JS variables, but pages from the different origins--or even
   iframes from different origins on the same page--cannot.



Rescorla                   Expires May 2, 2012                  [Page 7]


Internet-Draft              RTC-Web Security                October 2011


3.3.  Bypassing SOP: CORS, WebSockets, and consent to communicate

   While SOP serves an important security function, it also makes it
   inconvenient to write certain classes of applications.  In
   particular, mash-ups, in which a script from origin A uses resources
   from origin B, can only be achieved via a certain amount of hackery.
   The W3C Cross-Origin Resource Sharing (CORS) spec [CORS] is a
   response to this demand.  In CORS, when a script from origin A
   executes what would otherwise be a forbidden cross-origin request,
   the browser instead contacts the target server to determine whether
   it is willing to allow cross-origin requests from A. If it is so
   willing, the browser then allows the request.  This consent
   verification process is designed to safely allow cross-origin
   requests.

   While CORS is designed to allow cross-origin HTTP requests,
   WebSockets [I-D.ietf-hybi-thewebsocketprotocol] allows cross-origin
   establishment of transparent channels.  Once a WebSockets connection
   has been established from a script to a site, the script can exchange
   any traffic it likes without being required to frame it as a series
   of HTTP request/response transactions.  As with CORS, a WebSockets
   transaction starts with a consent verification stage to avoid
   allowing scripts to simply send arbitrary data to another origin.

   While consent verification is conceptually simple--just do a
   handshake before you start exchanging the real data--experience has
   shown that designing a correct consent verification system is
   difficult.  In particular, Huang et al. [huang-w2sp] have shown
   vulnerabilities in the existing Java and Flash consent verification
   techniques and in a simplified version of the WebSockets handshake.
   In particular, it is important to be wary of CROSS-PROTOCOL attacks
   in which the attacking script generates traffic which is acceptable
   to some non-Web protocol state machine.  In order to resist this form
   of attack, WebSockets incorporates a masking technique intended to
   randomize the bits on the wire, thus making it more difficult to
   generate traffic which resembles a given protocol.


4.  Security for RTC-Web Applications

4.1.  Access to Local Devices

   As discussed in Section 1, allowing arbitrary sites to initiate calls
   violates the core Web security guarantee; without some access
   restrictions on local devices, any malicious site could simply bug a
   user.  At minimum, then, it MUST NOT be possible for arbitrary sites
   to initiate calls to arbitrary locations without user consent.  This
   immediately raises the question, however, of what should be the scope



Rescorla                   Expires May 2, 2012                  [Page 8]


Internet-Draft              RTC-Web Security                October 2011


   of user consent.

   For the rest of this discussion we assume that the user is somehow
   going to grant consent to some entity (e.g., a social networking
   site) to initiate a call on his behalf.  This consent may be limited
   to a single call or may be a general consent.  In order for the user
   to make an intelligent decision about whether to allow a call (and
   hence his camera and microphone input to be routed somewhere), he
   must understand either who is requesting access, where the media is
   going, or both.  So, for instance, one might imagine that at the time
   access to camera and microphone is requested, the user is shown a
   dialog that says "site X has requested access to camera and
   microphone, yes or no" (though note that this type of in-flow
   interface violates one of the guidelines in Section 3).  The user's
   decision will of course be based on his opinion of Site X. However,
   as discussed below, this is a complicated concept.

4.1.1.  Calling Scenarios and User Expectations

   While a large number of possible calling scenarios are possible, the
   scenarios discussed in this section illustrate many of the
   difficulties of identifying the relevant scope of consent.

4.1.1.1.  Dedicated Calling Services

   The first scenario we consider is a dedicated calling service.  In
   this case, the user has a relationship with a calling site and
   repeatedly makes calls on it.  It is likely that rather than having
   to give permission for each call that the user will want to give the
   calling service long-term access to the camera and microphone.  This
   is a natural fit for a long-term consent mechanism (e.g., installing
   an app store "application" to indicate permission for the calling
   service.)  A variant of the dedicated calling service is a gaming
   site (e.g., a poker site) which hosts a dedicated calling service to
   allow players to call each other.

   With any kind of service where the user may use the same service to
   talk to many different people, there is a question about whether the
   user can know who they are talking to.  In general, this is difficult
   as most of the user interface is presented by the calling site.
   However, communications security mechanisms can be used to give some
   assurance, as described in Section 4.3.2.

4.1.1.2.  Calling the Site You're On

   Another simple scenario is calling the site you're actually visiting.
   The paradigmatic case here is the "click here to talk to a
   representative" windows that appear on many shopping sites.  In this



Rescorla                   Expires May 2, 2012                  [Page 9]


Internet-Draft              RTC-Web Security                October 2011


   case, the user's expectation is that they are calling the site
   they're actually visiting.  However, it is unlikely that they want to
   provide a general consent to such a site; just because I want some
   information on a car doesn't mean that I want the car manufacturer to
   be able to activate my microphone whenever they please.  Thus, this
   suggests the need for a second consent mechanism where I only grant
   consent for the duration of a given call.  As described in
   Section 3.1, great care must be taken in the design of this interface
   to avoid the users just clicking through.  Note also that the user
   interface chrome must clearly display elements showing that the call
   is continuing in order to avoid attacks where the calling site just
   leaves it up indefinitely but shows a Web UI that implies otherwise.

4.1.1.3.  Calling to an Ad Target

   In both of the previous cases, the user has a direct relationship
   (though perhaps a transient one) with the target of the call.
   Moreover, in both cases he is actually visiting the site of the
   person he is being asked to trust.  However, this is not always so.
   Consider the case where a user is a visiting a content site which
   hosts an advertisement with an invitation to call for more
   information.  When the user clicks the ad, they are connected with
   the advertiser or their agent.

   The relationships here are far more complicated:  the site the user
   is actually visiting has no direct relationship with the advertiser;
   they are just hosting ads from an ad network.  The user has no
   relationship with the ad network, but desires one with the
   advertiser, at least for long enough to learn about their products.
   At minimum, then, whatever consent dialog is shown needs to allow the
   user to have some idea of the organization that they are actually
   calling.

   However, because the user also has some relationship with the hosting
   site, it is also arguable that the hosting site should be allowed to
   express an opinion (e.g., to be able to allow or forbid a call) since
   a bad experience with an advertiser reflect negatively on the hosting
   site [this idea was suggested by Adam Barth].  However, this
   obviously presents a privacy challenge, as sites which host
   advertisements often learn very little about whether individual users
   clicked through to the ads, or even which ads were presented.

4.1.2.  Origin-Based Security

   As discussed in Section 3.2, the basic unit of Web sandboxing is the
   origin, and so it is natural to scope consent to origin.
   Specifically, a script from origin A MUST only be allowed to initiate
   communications (and hence to access camera and microphone) if the



Rescorla                   Expires May 2, 2012                 [Page 10]


Internet-Draft              RTC-Web Security                October 2011


   user has specifically authorized access for that origin.  It is of
   course technically possible to have coarser-scoped permissions, but
   because the Web model is scoped to origin, this creates a difficult
   mismatch.

   Arguably, origin is not fine-grained enough.  Consider the situation
   where Alice visits a site and authorizes it to make a single call.
   If consent is expressed solely in terms of origin, then at any future
   visit to that site (including one induced via mash-up or ad network),
   the site can bug Alice's computer, use the computer to place bogus
   calls, etc.  While in principle Alice could grant and then revoke the
   privilege, in practice privileges accumulate; if we are concerned
   about this attack, something else is needed.  There are a number of
   potential countermeasures to this sort of issue.

   Individual Consent
      Ask the user for permission for each call.

   Callee-oriented Consent
      Only allow calls to a given user.

   Cryptographic Consent
      Only allow calls to a given set of peer keying material or to a
      cryptographically established identity.

   Unfortunately, none of these approaches is satisfactory for all
   cases.  As discussed above, individual consent puts the user's
   approval in the UI flow for every call.  Not only does this quickly
   become annoying but it can train the user to simply click "OK", at
   which point the consent becomes useless.  Thus, while it may be
   necessary to have individual consent in some case, this is not a
   suitable solution for (for instance) the calling service case.  Where
   necessary, in-flow user interfaces must be carefully designed to
   avoid the risk of the user blindly clicking through.

   The other two options are designed to restrict calls to a given
   target.  Unfortunately, Callee-oriented consent does not work well
   because a malicious site can claim that the user is calling any user
   of his choice.  One fix for this is to tie calls to a
   cryptographically established identity.  While not suitable for all
   cases, this approach may be useful for some.  If we consider the
   advertising case described in Section 4.1.1.3, it's not particularly
   convenient to require the advertiser to instantiate an iframe on the
   hosting site just to get permission; a more convenient approach is to
   cryptographically tie the advertiser's certificate to the
   communication directly.  We're still tying permissions to origin
   here, but to the media origin (and-or destination) rather than to the
   Web origin.



Rescorla                   Expires May 2, 2012                 [Page 11]


Internet-Draft              RTC-Web Security                October 2011


   Another case where media-level cryptographic identity makes sense is
   when a user really does not trust the calling site.  For instance, I
   might be worried that the calling service will attempt to bug my
   computer, but I also want to be able to conveniently call my friends.
   If consent is tied to particular communications endpoints, then my
   risk is limited.  However, this is also not that convenient an
   interface, since managing individual user permissions can be painful.

   While this is primarily a question not for IETF, it should be clear
   that there is no really good answer.  In general, if you cannot trust
   the site which you have authorized for calling not to bug you then
   your security situation is not really ideal.  It is RECOMMENDED that
   browsers have explicit (and obvious) indicators that they are in a
   call in order to mitigate this risk.

4.1.3.  Security Properties of the Calling Page

   Origin-based security is intended to secure against web attackers.
   However, we must also consider the case of network attackers.
   Consider the case where I have granted permission to a calling
   service by an origin that has the HTTP scheme, e.g.,
   http://calling-service.example.com.  If I ever use my computer on an
   unsecured network (e.g., a hotspot or if my own home wireless network
   is insecure), and browse any HTTP site, then an attacker can bug my
   computer.  The attack proceeds like this:

   1.  I connect to http://anything.example.org/.  Note that this site
       is unaffiliated with the calling service.
   2.  The attacker modifies my HTTP connection to inject an IFRAME (or
       a redirect) to http://calling-service.example.com
   3.  The attacker forges the response apparently
       http://calling-service.example.com/ to inject JS to initiate a
       call to himself.

   Note that this attack does not depend on the media being insecure.
   Because the call is to the attacker, it is also encrypted to him.
   Moreover, it need not be executed immediately; the attacker can
   "infect" the origin semi-permanently (e.g., with a web worker or a
   popunder) and thus be able to bug me long after I have left the
   infected network.  This risk is created by allowing calls at all from
   a page fetched over HTTP.

   Even if calls are only possible from HTTPS sites, if the site embeds
   active content (e.g., JavaScript) that is fetched over HTTP or from
   an untrusted site, because that JavaScript is executed in the
   security context of the page [finer-grained].  Thus, it is also
   dangerous to allow RTC-Web functionality from HTTPS origins that
   embed mixed content.  Note:  this issue is not restricted to PAGES



Rescorla                   Expires May 2, 2012                 [Page 12]


Internet-Draft              RTC-Web Security                October 2011


   which contain mixed content.  If a page from a given origin ever
   loads mixed content then it is possible for a network attacker to
   infect the browser's notion of that origin semi-permanently.

   [[ OPEN ISSUE:  What recommendation should IETF make about (a)
   whether RTCWeb long-term consent should be available over HTTP pages
   and (b) How to handle origins where the consent is to an HTTPS URL
   but the page contains active mixed content? ]]

4.2.  Communications Consent Verification

   As discussed in Section 3.3, allowing web applications unrestricted
   network access via the browser introduces the risk of using the
   browser as an attack platform against machines which would not
   otherwise be accessible to the malicious site, for instance because
   they are topologically restricted (e.g., behind a firewall or NAT).
   In order to prevent this form of attack as well as cross-protocol
   attacks it is important to require that the target of traffic
   explicitly consent to receiving the traffic in question.  Until that
   consent has been verified for a given endpoint, traffic other than
   the consent handshake MUST NOT be sent to that endpoint.

4.2.1.  ICE

   Verifying receiver consent requires some sort of explicit handshake,
   but conveniently we already need one in order to do NAT hole-
   punching.  ICE [RFC5245] includes a handshake designed to verify that
   the receiving element wishes to receive traffic from the sender.  It
   is important to remember here that the site initiating ICE is
   presumed malicious; in order for the handshake to be secure the
   receiving element MUST demonstrate receipt/knowledge of some value
   not available to the site (thus preventing the site from forging
   responses).  In order to achieve this objective with ICE, the STUN
   transaction IDs must be generated by the browser and MUST NOT be made
   available to the initiating script, even via a diagnostic interface.
   Verifying receiver consent also requires verifying the receiver wants
   to receive traffic from a particular sender, and at this time; for
   example a malicious site may simply attempt ICE to known servers that
   are using ICE for other sessions.  ICE provides this verification as
   well, by using the STUN credentials as a form of per-session shared
   secret.  Those credentials are known to the Web application, but
   would need to also be known and used by the STUN-receiving element to
   be useful.

   There also needs to be some mechanism for the browser to verify that
   the target of the traffic continues to wish to receive it.
   Obviously, some ICE-based mechanism will work here, but it has been
   observed that because ICE keepalives are indications, they will not



Rescorla                   Expires May 2, 2012                 [Page 13]


Internet-Draft              RTC-Web Security                October 2011


   work here, so some other mechanism is needed.

4.2.2.  Masking

   Once consent is verified, there still is some concern about
   misinterpretation attacks as described by Huang et al.[huang-w2sp].
   As long as communication is limited to UDP, then this risk is
   probably limited, thus masking is not required for UDP.  I.e., once
   communications consent has been verified, it is most likely safe to
   allow the implementation to send arbitrary UDP traffic to the chosen
   destination, provided that the STUN keepalives continue to succeed.
   In particular, this is true for the data channel if DTLS is used
   because DTLS (with the anti-chosen plaintext mechanisms required by
   TLS 1.1) does not allow the attacker to generate predictable
   ciphertext.  However, with TCP the risk of transparent proxies
   becomes much more severe.  If TCP is to be used, then WebSockets
   style masking MUST be employed.

4.2.3.  Backward Compatibility

   A requirement to use ICE limits compatibility with legacy non-ICE
   clients.  It seems unsafe to completely remove the requirement for
   some check.  All proposed checks have the common feature that the
   browser sends some message to the candidate traffic recipient and
   refuses to send other traffic until that message has been replied to.
   The message/reply pair must be generated in such a way that an
   attacker who controls the Web application cannot forge them,
   generally by having the message contain some secret value that must
   be incorporated (e.g., echoed, hashed into, etc.).  Non-ICE
   candidates for this role (in cases where the legacy endpoint has a
   public address) include:

   o  STUN checks without using ICE (i.e., the non-RTC-web endpoint sets
      up a STUN responder.)
   o  Use or RTCP as an implicit reachability check.

   In the RTCP approach, the RTC-Web endpoint is allowed to send a
   limited number of RTP packets prior to receiving consent.  This
   allows a short window of attack.  In addition, some legacy endpoints
   do not support RTCP, so this is a much more expensive solution for
   such endpoints, for which it would likely be easier to implement ICE.
   For these two reasons, an RTCP-based approach does not seem to
   address the security issue satisfactorily.

   In the STUN approach, the RTC-Web endpoint is able to verify that the
   recipient is running some kind of STUN endpoint but unless the STUN
   responder is integrated with the ICE username/password establishment
   system, the RTC-Web endpoint cannot verify that the recipient



Rescorla                   Expires May 2, 2012                 [Page 14]


Internet-Draft              RTC-Web Security                October 2011


   consents to this particular call.  This may be an issue if existing
   STUN servers are operated at addresses that are not able to handle
   bandwidth-based attacks.  Thus, this approach does not seem
   satisfactory either.

   If the systems are tightly integrated (i.e., the STUN endpoint
   responds with responses authenticated with ICE credentials) then this
   issue does not exist.  However, such a design is very close to an
   ICE-Lite implementation (indeed, arguably is one).  An intermediate
   approach would be to have a STUN extension that indicated that one
   was responding to RTC-Web checks but not computing integrity checks
   based on the ICE credentials.  This would allow the use of standalone
   STUN servers without the risk of confusing them with legacy STUN
   servers.  If a non-ICE legacy solution is needed, then this is
   probably the best choice.

   Once initial consent is verified, we also need to verify continuing
   consent, in order to avoid attacks where two people briefly share an
   IP (e.g., behind a NAT in an Internet cafe) and the attacker arranges
   for a large, unstoppable, traffic flow to the network and then
   leaves.  The appropriate technologies here are fairly similar to
   those for initial consent, though are perhaps weaker since the
   threats is less severe.

   [[ OPEN ISSUE:  Exactly what should be the requirements here?
   Proposals include ICE all the time or ICE but with allowing one of
   these non-ICE things for legacy. ]]

4.2.4.  IP Location Privacy

   Note that as soon as the callee sends their ICE candidates, the
   callee learns the callee's IP addresses.  The callee's server
   reflexive address reveals a lot of information about the callee's
   location.  In order to avoid tracking, implementations may wish to
   suppress the start of ICE negotiation until the callee has answered.
   In addition, either side may wish to hide their location entirely by
   forcing all traffic through a TURN server.

4.3.  Communications Security

   Finally, we consider a problem familiar from the SIP world:
   communications security.  For obvious reasons, it MUST be possible
   for the communicating parties to establish a channel which is secure
   against both message recovery and message modification.  (See
   [RFC5479] for more details.)  This service must be provided for both
   data and voice/video.  Ideally the same security mechanisms would be
   used for both types of content.  Technology for providing this
   service (for instance, DTLS [RFC4347] and DTLS-SRTP [RFC5763]) is



Rescorla                   Expires May 2, 2012                 [Page 15]


Internet-Draft              RTC-Web Security                October 2011


   well understood.  However, we must examine this technology to the
   RTC-Web context, where the threat model is somewhat different.

   In general, it is important to understand that unlike a conventional
   SIP proxy, the calling service (i.e., the Web server) controls not
   only the channel between the communicating endpoints but also the
   application running on the user's browser.  While in principle it is
   possible for the browser to cut the calling service out of the loop
   and directly present trusted information (and perhaps get consent),
   practice in modern browsers is to avoid this whenever possible.  "In-
   flow" modal dialogs which require the user to consent to specific
   actions are particularly disfavored as human factors research
   indicates that unless they are made extremely invasive, users simply
   agree to them without actually consciously giving consent.
   [abarth-rtcweb].  Thus, nearly all the UI will necessarily be
   rendered by the browser but under control of the calling service.
   This likely includes the peer's identity information, which, after
   all, is only meaningful in the context of some calling service.

   This limitation does not mean that preventing attack by the calling
   service is completely hopeless.  However, we need to distinguish
   between two classes of attack:

   Retrospective compromise of calling service.
      The calling service is is non-malicious during a call but
      subsequently is compromised and wishes to attack an older call.

   During-call attack by calling service.
      The calling service is compromised during the call it wishes to
      attack.

   Providing security against the former type of attack is practical
   using the techniques discussed in Section 4.3.1.  However, it is
   extremely difficult to prevent a trusted but malicious calling
   service from actively attacking a user's calls, either by mounting a
   MITM attack or by diverting them entirely.  (Note that this attack
   applies equally to a network attacker if communications to the
   calling service are not secured.)  We discuss some potential
   approaches and why they are likely to be impractical in
   Section 4.3.2.

4.3.1.  Protecting Against Retrospective Compromise

   In a retrospective attack, the calling service was uncompromised
   during the call, but that an attacker subsequently wants to recover
   the content of the call.  We assume that the attacker has access to
   the protected media stream as well as having full control of the
   calling service.



Rescorla                   Expires May 2, 2012                 [Page 16]


Internet-Draft              RTC-Web Security                October 2011


   If the calling service has access to the traffic keying material (as
   in SDES [RFC4568]), then retrospective attack is trivial.  This form
   of attack is particularly serious in the Web context because it is
   standard practice in Web services to run extensive logging and
   monitoring.  Thus, it is highly likely that if the traffic key is
   part of any HTTP request it will be logged somewhere and thus subject
   to subsequent compromise.  It is this consideration that makes an
   automatic, public key-based key exchange mechanism imperative for
   RTC-Web (this is a good idea for any communications security system)
   and this mechanism SHOULD provide perfect forward secrecy (PFS).  The
   signaling channel/calling service can be used to authenticate this
   mechanism.

   In addition, the system MUST NOT provide any APIs to extract either
   long-term keying material or to directly access any stored traffic
   keys.  Otherwise, an attacker who subsequently compromised the
   calling service might be able to use those APIs to recover the
   traffic keys and thus compromise the traffic.

4.3.2.  Protecting Against During-Call Attack

   Protecting against attacks during a call is a more difficult
   proposition.  Even if the calling service cannot directly access
   keying material (as recommended in the previous section), it can
   simply mount a man-in-the-middle attack on the connection, telling
   Alice that she is calling Bob and Bob that he is calling Alice, while
   in fact the calling service is acting as a calling bridge and
   capturing all the traffic.  While in theory it is possible to
   construct techniques which protect against this form of attack, in
   practice these techniques all require far too much user intervention
   to be practical, given the user interface constraints described in
   [abarth-rtcweb].

4.3.2.1.  Key Continuity

   One natural approach is to use "key continuity".  While a malicious
   calling service can present any identity it chooses to the user, it
   cannot produce a private key that maps to a given public key.  Thus,
   it is possible for the browser to note a given user's public key and
   generate an alarm whenever that user's key changes.  SSH [RFC4251]
   uses a similar technique.  (Note that the need to avoid explicit user
   consent on every call precludes the browser requiring an immediate
   manual check of the peer's key).

   Unfortunately, this sort of key continuity mechanism is far less
   useful in the RTC-Web context.  First, much of the virtue of RTC-Web
   (and any Web application) is that it is not bound to particular piece
   of client software.  Thus, it will be not only possible but routine



Rescorla                   Expires May 2, 2012                 [Page 17]


Internet-Draft              RTC-Web Security                October 2011


   for a user to use multiple browsers on different computers which will
   of course have different keying material (SACRED [RFC3760]
   notwithstanding.)  Thus, users will frequently be alerted to key
   mismatches which are in fact completely legitimate, with the result
   that they are trained to simply click through them.  As it is known
   that users routinely will click through far more dire warnings
   [cranor-wolf], it seems extremely unlikely that any key continuity
   mechanism will be effective rather than simply annoying.

   Moreover, it is trivial to bypass even this kind of mechanism.
   Recall that unlike the case of SSH, the browser never directly gets
   the peer's identity from the user.  Rather, it is provided by the
   calling service.  Even enabling a mechanism of this type would
   require an API to allow the calling service to tell the browser "this
   is a call to user X".  All the calling service needs to do to avoid
   triggering a key continuity warning is to tell the browser that "this
   is a call to user Y" where Y is close to X. Even if the user actually
   checks the other side's name (which all available evidence indicates
   is unlikely), this would require (a) the browser to trusted UI to
   provide the name and (b) the user to not be fooled by similar
   appearing names.

4.3.2.2.  Short Authentication Strings

   ZRTP [RFC6189] uses a "short authentication string" (SAS) which is
   derived from the key agreement protocol.  This SAS is designed to be
   read over the voice channel and if confirmed by both sides precludes
   MITM attack.  The intention is that the SAS is used once and then key
   continuity (though a different mechanism from that discussed above)
   is used thereafter.

   Unfortunately, the SAS does not offer a practical solution to the
   problem of a compromised calling service.  "Voice conversion"
   systems, which modify voice from one speaker to make it sound like
   another, are an active area of research.  These systems are already
   good enough to fool both automatic recognition systems
   [farus-conversion] and humans [kain-conversion] in many cases, and
   are of course likely to improve in future, especially in an
   environment where the user just wants to get on with the phone call.
   Thus, even if SAS is effective today, it is likely not to be so for
   much longer.  Moreover, it is possible for an attacker who controls
   the browser to allow the SAS to succeed and then simulate call
   failure and reconnect, trusting that the user will not notice that
   the "no SAS" indicator has been set (which seems likely).

   Even were SAS secure if used, it seems exceedingly unlikely that
   users will actually use it.  As discussed above, the browser UI
   constraints preclude requiring the SAS exchange prior to completing



Rescorla                   Expires May 2, 2012                 [Page 18]


Internet-Draft              RTC-Web Security                October 2011


   the call and so it must be voluntary; at most the browser will
   provide some UI indicator that the SAS has not yet been checked.
   However, it it is well-known that when faced with optional mechanisms
   such as fingerprints, users simply do not check them [whitten-johnny]
   Thus, it is highly unlikely that users will ever perform the SAS
   exchange.

   Once uses have checked the SAS once, key continuity is required to
   avoid them needing to check it on every call.  However, this is
   problematic for reasons indicated in Section 4.3.2.1.  In principle
   it is of course possible to render a different UI element to indicate
   that calls are using an unauthenticated set of keying material
   (recall that the attacker can just present a slightly different name
   so that the attack shows the same UI as a call to a new device or to
   someone you haven't called before) but as a practical matter, users
   simply ignore such indicators even in the rather more dire case of
   mixed content warnings.

4.3.2.3.  Recommendations

   [[ OPEN ISSUE:  What are the best UI recommendations to make?
   Proposal:  take the text from [I-D.kaufman-rtcweb-security-ui]
   Section 2]]

   [[ OPEN ISSUE:  Exactly what combination of media security primitives
   should be specified and/or mandatory to implement?  In particular,
   should we allow DTLS-SRTP only, or both DTLS-SRTP and SDES.  Should
   we allow RTP for backward compatibility? ]]


5.  Security Considerations

   This entire document is about security.


6.  Acknowledgements

   Bernard Aboba, Harald Alvestrand, Cullen Jennings, Hadriel Kaplan (S
   4.2.1), Matthew Kaufman, Magnus Westerland.


7.  References

7.1.  Normative References

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119, March 1997.




Rescorla                   Expires May 2, 2012                 [Page 19]


Internet-Draft              RTC-Web Security                October 2011


7.2.  Informative References

   [CORS]     van Kesteren, A., "Cross-Origin Resource Sharing".

   [I-D.abarth-origin]
              Barth, A., "The Web Origin Concept",
              draft-abarth-origin-09 (work in progress), November 2010.

   [I-D.ietf-hybi-thewebsocketprotocol]
              Fette, I. and A. Melnikov, "The WebSocket protocol",
              draft-ietf-hybi-thewebsocketprotocol-17 (work in
              progress), September 2011.

   [I-D.kaufman-rtcweb-security-ui]
              Kaufman, M., "Client Security User Interface Requirements
              for RTCWEB", draft-kaufman-rtcweb-security-ui-00 (work in
              progress), June 2011.

   [RFC2818]  Rescorla, E., "HTTP Over TLS", RFC 2818, May 2000.

   [RFC3261]  Rosenberg, J., Schulzrinne, H., Camarillo, G., Johnston,
              A., Peterson, J., Sparks, R., Handley, M., and E.
              Schooler, "SIP: Session Initiation Protocol", RFC 3261,
              June 2002.

   [RFC3552]  Rescorla, E. and B. Korver, "Guidelines for Writing RFC
              Text on Security Considerations", BCP 72, RFC 3552,
              July 2003.

   [RFC3760]  Gustafson, D., Just, M., and M. Nystrom, "Securely
              Available Credentials (SACRED) - Credential Server
              Framework", RFC 3760, April 2004.

   [RFC4251]  Ylonen, T. and C. Lonvick, "The Secure Shell (SSH)
              Protocol Architecture", RFC 4251, January 2006.

   [RFC4347]  Rescorla, E. and N. Modadugu, "Datagram Transport Layer
              Security", RFC 4347, April 2006.

   [RFC4568]  Andreasen, F., Baugher, M., and D. Wing, "Session
              Description Protocol (SDP) Security Descriptions for Media
              Streams", RFC 4568, July 2006.

   [RFC5245]  Rosenberg, J., "Interactive Connectivity Establishment
              (ICE): A Protocol for Network Address Translator (NAT)
              Traversal for Offer/Answer Protocols", RFC 5245,
              April 2010.




Rescorla                   Expires May 2, 2012                 [Page 20]


Internet-Draft              RTC-Web Security                October 2011


   [RFC5479]  Wing, D., Fries, S., Tschofenig, H., and F. Audet,
              "Requirements and Analysis of Media Security Management
              Protocols", RFC 5479, April 2009.

   [RFC5763]  Fischl, J., Tschofenig, H., and E. Rescorla, "Framework
              for Establishing a Secure Real-time Transport Protocol
              (SRTP) Security Context Using Datagram Transport Layer
              Security (DTLS)", RFC 5763, May 2010.

   [RFC6189]  Zimmermann, P., Johnston, A., and J. Callas, "ZRTP: Media
              Path Key Agreement for Unicast Secure RTP", RFC 6189,
              April 2011.

   [abarth-rtcweb]
              Barth, A., "Prompting the user is security failure",  RTC-
              Web Workshop.

   [cranor-wolf]
              Sunshine, J., Egelman, S., Almuhimedi, H., Atri, N., and
              L. cranor, "Crying Wolf: An Empirical Study of SSL Warning
              Effectiveness",  Proceedings of the 18th USENIX Security
              Symposium, 2009.

   [farus-conversion]
              Farrus, M., Erro, D., and J. Hernando, "Speaker
              Recognition Robustness to Voice Conversion".

   [finer-grained]
              Barth, A. and C. Jackson, "Beware of Finer-Grained
              Origins",  W2SP, 2008.

   [huang-w2sp]
              Huang, L-S., Chen, E., Barth, A., Rescorla, E., and C.
              Jackson, "Talking to Yourself for Fun and Profit",  W2SP,
              2011.

   [kain-conversion]
              Kain, A. and M. Macon, "Design and Evaluation of a Voice
              Conversion Algorithm based on Spectral Envelope Mapping
              and Residual Prediction",  Proceedings of ICASSP, May
              2001.

   [whitten-johnny]
              Whitten, A. and J. Tygar, "Why Johnny Can't Encrypt: A
              Usability Evaluation of PGP 5.0",  Proceedings of the 8th
              USENIX Security Symposium, 1999.





Rescorla                   Expires May 2, 2012                 [Page 21]


Internet-Draft              RTC-Web Security                October 2011


Appendix A.  A Proposed Security Architecture [No Consensus on This]

   This section contains a proposed security architecture, based on the
   considerations discussed in the main body of this memo.  This section
   is currently the opinion of the author and does not have consensus
   though some (many?) elements of this proposal do seem to have general
   consensus.

A.1.  Trust Hierarchy

   The basic assumption of this proposal is that network resources exist
   in a hierarchy of trust, rooted in the browser, which serves as the
   user's TRUSTED COMPUTING BASE (TCB).  Any security property which the
   user wishes to have enforced must be ultimately guaranteed by the
   browser (or transitively by some property the browser verifies).
   Conversely, if the browser is compromised, then no security
   guarantees are possible.  Note that there are cases (e.g., Internet
   kiosks) where the user can't really trust the browser that much.  In
   these cases, the level of security provided is limited by how much
   they trust the browser.

   Optimally, we would not rely on trust in any entities other than the
   browser.  However, this is unfortunately not possible if we wish to
   have a functional system.  Other network elements fall into two
   categories:  those which can be authenticated by the browser and thus
   are partly trusted--though to the minimum extent necessary--and those
   which cannot be authenticated and thus are untrusted.  This is a
   natural extension of the end-to-end principle.

A.1.1.  Authenticated Entities

   There are two major classes of authenticated entities in the system:

   o  Calling services:  Web sites whose origin we can verify (optimally
      via HTTPS).
   o  Other users:  RTC-Web peers whose origin we can verify
      cryptographically (optimally via DTLS-SRTP).

   Note that merely being authenticated does not make these entities
   trusted.  For instance, just because we can verify that
   https://www.evil.org/ is owned by Dr. Evil does not mean that we can
   trust Dr. Evil to access our camera an microphone.  However, it gives
   the user an opportunity to determine whether he wishes to trust Dr.
   Evil or not; after all, if he desires to contact Dr. Evil, it's safe
   to temporarily give him access to the camera and microphone for the
   purpose of the call.  The point here is that we must first identify
   other elements before we can determine whether to trust them.




Rescorla                   Expires May 2, 2012                 [Page 22]


Internet-Draft              RTC-Web Security                October 2011


   It's also worth noting that there are settings where authentication
   is non-cryptographic, such as other machines behind a firewall.
   Naturally, the level of trust one can have in identities verified in
   this way depends on how strong the topology enforcement is.

A.1.2.  Unauthenticated Entities

   Other than the above entities, we are not generally able to identify
   other network elements, thus we cannot trust them.  This does not
   mean that it is not possible to have any interaction with them, but
   it means that we must assume that they will behave maliciously and
   design a system which is secure even if they do so.

A.2.  Overview

   This section describes a typical RTCWeb session and shows how the
   various security elements interact and what guarantees are provided
   to the user.  The example in this section is a "best case" scenario
   in which we provide the maximal amount of user authentication and
   media privacy with the minimal level of trust in the calling service.
   Simpler versions with lower levels of security are also possible and
   are noted in the text where applicable.  It's also important to
   recognize the tension between security (or performance) and privacy.
   The example shown here is aimed towards settings where we are more
   concerned about secure calling than about privacy, but as we shall
   see, there are settings where one might wish to make different
   tradeoffs--this architecture is still compatible with those settings.

   For the purposes of this example, we assume the topology shown in the
   figure below.  This topology is derived from the topology shown in
   Figure 1, but separates Alice and Bob's identities from the process
   of signaling.  Specifically, Alice and Bob have relationships with
   some Identity Provider (IDP) that supports a protocol such OpenID or
   BrowserID) that can be used to attest to their identity.  This
   separation isn't particularly important in "closed world" cases where
   Alice and Bob are users on the same social network and have
   identities based on that network.  However, there are important
   settings where that is not the case, such as federation (calls from
   one network to another) and calling on untrusted sites, such as where
   two users who have a relationship via a given social network want to
   call each other on another, untrusted, site, such as a poker site.










Rescorla                   Expires May 2, 2012                 [Page 23]


Internet-Draft              RTC-Web Security                October 2011


                               +----------------+
                               |                |
                               |     Signaling  |
                               |     Server     |
                               |                |
                               +----------------+
                                   ^        ^
                                  /          \
                          HTTPS  /            \   HTTPS
                                /              \
                               /                \
                              v                  v
                           JS API              JS API
                     +-----------+            +-----------+
                     |           |    Media   |           |
               Alice |  Browser  |<---------->|  Browser  | Bob
                     |           | (DTLS-SRTP)|           |
                     +-----------+            +-----------+
                           ^      ^--+     +--^     ^
                           |         |     |        |
                           v         |     |         v
                     +-----------+   |     |  +-----------+
                     |           |<--------+  |           |
                     |   IDP     |   |        |    IDP    |
                     |           |   +------->|           |
                     +-----------+            +-----------+

                 Figure 2: A call with IDP-based identity

A.2.1.  Initial Signaling

   Alice and Bob are both users of a common calling service; they both
   have approved the calling service to make calls (we defer the
   discussion of device access permissions till later).  They are both
   connected to the calling service via HTTPS and so know the origin
   with some level of confidence.  They also have accounts with some
   identity provider.  This sort of identity service is becoming
   increasingly common in the Web environment in technologies such
   (BrowserID, Federated Google Login, Facebook Connect, OAuth, OpenID,
   WebFinger), and is often provided as a side effect service of your
   ordinary accounts with some service.  In this example, we show Alice
   and Bob using a separate identity service, though they may actually
   be using the same identity service as calling service or have no
   identity service at all.

   Alice is logged onto the calling service and decides to call Bob. She
   can see from the calling service that he is online and the calling
   service presents a JS UI in the form of a button next to Bob's name



Rescorla                   Expires May 2, 2012                 [Page 24]


Internet-Draft              RTC-Web Security                October 2011


   which says "Call".  Alice clicks the button, which initiates a JS
   callback that instantiates a PeerConnection object.  This does not
   require a security check:  JS from any origin is allowed to get this
   far.

   Once the PeerConnection is created, the calling service JS needs to
   set up some media.  Because this is an audio/video call, it creates
   two MediaStreams, one connected to an audio input and one connected
   to a video input.  At this point the first security check is
   required:  untrusted origins are not allowed to access the camera and
   microphone.  In this case, because Alice is a long-term user of the
   calling service, she has made a permissions grant (i.e., a setting in
   the browser) to allow the calling service to access her camera and
   microphone any time it wants.  The browser checks this setting when
   the camera and microphone requests are made and thus allows them.

   In the current W3C API, once some streams have been added, Alice's
   browser + JS generates a signaling message The format of this data is
   currently undefined.  It may be a complete message as defined by ROAP
   [REF] or may be assembled piecemeal by the JS.  In either case, it
   will contain:

   o  Media channel information
   o  ICE candidates
   o  A fingerprint attribute binding the message to Alice's public key
      [RFC5763]

   Prior to sending out the signaling message, the PeerConnection code
   contacts the identity service and obtains an assertion binding
   Alice's identity to her fingerprint.  The exact details depend on the
   identity service (though as discussed in Appendix A.3.6.4 I believe
   PeerConnection can be agnostic to them), but for now it's easiest to
   think of as a BrowserID assertion.

   This message is sent to the signaling server, e.g., by XMLHttpRequest
   [REF] or by WebSockets [I-D.ietf-hybi-thewebsocketprotocol].  The
   signaling server processes the message from Alice's browser,
   determines that this is a call to Bob and sends a signaling message
   to Bob's browser (again, the format is currently undefined).  The JS
   on Bob's browser processes it, and alerts Bob to the incoming call
   and to Alice's identity.  In this case, Alice has provided an
   identity assertion and so Bob's browser contacts Alice's identity
   provider (again, this is done in a generic way so the browser has no
   specific knowledge of the IDP) to verity the assertion.  This allows
   the browser to display a trusted element indicating that a call is
   coming in from Alice.  If Alice is in Bob's address book, then this
   interface might also include her real name, a picture, etc.  The
   calling site will also provide some user interface element (e.g., a



Rescorla                   Expires May 2, 2012                 [Page 25]


Internet-Draft              RTC-Web Security                October 2011


   button) to allow Bob to answer the call, though this is most likely
   not part of the trusted UI.

   If Bob agrees [I am ignoring early media for now], a PeerConnection
   is instantiated with the message from Alice's side.  Then, a similar
   process occurs as on Alice's browser:  Bob's browser verifies that
   the calling service is approved, the media streams are created, and a
   return signaling message containing media information, ICE
   candidates, and a fingerprint is sent back to Alice via the signaling
   service.  If Bob has a relationship with an IDP, the message will
   also come with an identity assertion.

   At this point, Alice and Bob each know that the other party wants to
   have a secure call with them.  Based purely on the interface provided
   by the signaling server, they know that the signaling server claims
   that the call is from Alice to Bob. Because the far end sent an
   identity assertion along with their message, they know that this is
   verifiable from the IDP as well.  Of course, the call works perfectly
   well if either Alice or Bob doesn't have a relationship with an IDP;
   they just get a lower level of assurance.  Moreover, Alice might wish
   to make an anonymous call through an anonymous calling site, in which
   case she would of course just not provide any identity assertion and
   the calling site would mask her identity from Bob.

A.2.2.  Media Consent Verification

   As described in Section 4.2.  This proposal specifies that that be
   performed via ICE.  Thus, Alice and Bob perform ICE checks with each
   other.  At the completion of these checks, they are ready to send
   non-ICE data.

   At this point, Alice knows that (a) Bob (assuming he is verified via
   his IDP) or someone else who the signaling service is claiming is Bob
   is willing to exchange traffic with her and (b) that either Bob is at
   the IP address which she has verified via ICE or there is an attacker
   who is on-path to that IP address detouring the traffic.  Note that
   it is not possible for an attacker who is on-path but not attached to
   the signaling service to spoof these checks because they do not have
   the ICE credentials.  Bob's security guarantees with respect to Alice
   are the converse of this.

A.2.3.  DTLS Handshake

   Once the ICE checks have completed [more specifically, once some ICE
   checks have completed], Alice and Bob can set up a secure channel.
   This is performed via DTLS [RFC4347] (for the data channel) and DTLS-
   SRTP [RFC5763] for the media channel.  Specifically, Alice and Bob
   perform a DTLS handshake on every channel which has been established



Rescorla                   Expires May 2, 2012                 [Page 26]


Internet-Draft              RTC-Web Security                October 2011


   by ICE.  The total number of channels depends on the amount of
   muxing; in the most likely case we are using both RTP/RTCP mux and
   muxing multiple media streams on the same channel, in which case
   there is only one DTLS handshake.  Once the DTLS handshake has
   completed, the keys are extracted and used to key SRTP for the media
   channels.

   At this point, Alice and Bob know that they share a set of secure
   data and/or media channels with keys which are not known to any
   third-party attacker.  If Alice and Bob authenticated via their IDPs,
   then they also know that the signaling service is not attacking them.
   Even if they do not use an IDP, as long as they have minimal trust in
   the signaling service not to perform a man-in-the-middle attack, they
   know that their communications are secure against the signaling
   service as well.

A.2.4.  Communications and Consent Freshness

   From a security perspective, everything from here on in is a little
   anticlimactic:  Alice and Bob exchange data protected by the keys
   negotiated by DTLS.  Because of the security guarantees discussed in
   the previous sections, they know that the communications are
   encrypted and authenticated.

   The one remaining security property we need to establish is "consent
   freshness", i.e., allowing Alice to verify that Bob is still prepared
   to receive her communications.  ICE specifies periodic STUN
   keepalizes but only if media is not flowing.  Because the consent
   issue is more difficult here, we require RTCWeb implementations to
   periodically send keepalives.  If a keepalive fails and no new ICE
   channels can be established, then the session is terminated.

A.3.  Detailed Technical Description

A.3.1.  Origin and Web Security Issues

   The basic unit of permissions for RTC-Web is the origin
   [I-D.abarth-origin].  Because the security of the origin depends on
   being able to authenticate content from that origin, the origin can
   only be securely established if data is transferred over HTTPS.
   Thus, clients MUST treat HTTP and HTTPS origins as different
   permissions domains and SHOULD NOT permit access to any RTC-Web
   functionality from scripts fetched over non-secure (HTTP) origins.
   If an HTTPS origin contains mixed active content (regardless of
   whether it is present on the specific page attempting to access RTC-
   Web functionality), any access MUST be treated as if it came from the
   HTTP origin.  For instance, if a https://www.example.com/example.html
   loads https://www.example.com/example.js and



Rescorla                   Expires May 2, 2012                 [Page 27]


Internet-Draft              RTC-Web Security                October 2011


   http://www.example.org/jquery.js, any attempt by example.js to access
   RTCWeb functionality MUST be treated as if it came from
   http://www.example.com/.  Note that many browsers already track mixed
   content and either forbid it by default or display a warning.

A.3.2.  Device Permissions Model

   Implementations MUST obtain explicit user consent prior to providing
   access to the camera and/or microphone.  Implementations MUST at
   minimum support the following two permissions models:

   o  Requests for one-time camera/microphone access.
   o  Requests for permanent access.

   In addition, they SHOULD support requests for access to a single
   communicating peer.  E.g., "Call customerservice@ford.com".  Browsers
   servicing such requests SHOULD clearly indicate that identity to the
   user when asking for permission.

   API Requirement:  The API MUST provide a mechanism for the requesting
      JS to indicate which of these forms of permissions it is
      requesting.  This allows the client to know what sort of user
      interface experience to provide.  In particular, browsers might
      display a non-invasive door hanger ("some features of this site
      may not work..." when asking for long-term permissions) but a more
      invasive UI ("here is your own video") for single-call
      permissions.  The API MAY grant weaker permissions than the JS
      asked for if the user chooses to authorize only those permissions,
      but if it intends to grant stronger ones SHOULD display the
      appropriate UI for those permissions.

   API Requirement:  The API MUST provide a mechanism for the requesting
      JS to relinquish the ability to see or modify the media (e.g., via
      MediaStream.record()).  Combined with secure authentication of the
      communicating peer, this allows a user to be sure that the calling
      site is not accessing or modifying their conversion.

   UI Requirement:  The UI MUST clearly indicate when the user's camera
      and microphone are in use.  This indication MUST NOT be
      suppressable by the JS and MUST clearly indicate how to terminate
      a call, and provide a UI means to immediately stop camera/
      microphone input without the JS being able to prevent it.

   UI Requirement:  If the UI indication of camera/microphone use are
      displayed in the browser such that minimizing the browser window
      would hide the indication, or the JS creating an overlapping
      window would hide the indication, then the browser SHOULD stop
      camera and microphone input.



Rescorla                   Expires May 2, 2012                 [Page 28]


Internet-Draft              RTC-Web Security                October 2011


   Clients MAY permit the formation of data channels without any direct
   user approval.  Because sites can always tunnel data through the
   server, further restrictions on the data channel do not provide any
   additional security. (though see Appendix A.3.3 for a related issue).

   Implementations which support some form of direct user authentication
   SHOULD also provide a policy by which a user can authorize calls only
   to specific counterparties.  Specifically, the implementation SHOULD
   provide the following interfaces/controls:

   o  Allow future calls to this verified user.
   o  Allow future calls to any verified user who is in my system
      address book (this only works with address book integration, of
      course).

   Implementations SHOULD also provide a different user interface
   indication when calls are in progress to users whose identities are
   directly verifiable.  Appendix A.3.5 provides more on this.

A.3.3.  Communications Consent

   Browser client implementations of RTC-Web MUST implement ICE.  Server
   gateway implementations which operate only at public IP addresses may
   implement ICE-Lite.

   Browser implementations MUST verify reachability via ICE prior to
   sending any non-ICE packets to a given destination.  Implementations
   MUST NOT provide the ICE transaction ID to JavaScript.  [Note:  this
   document takes no position on the split between ICE in JS and ICE in
   the browser.  The above text is written the way it is for editorial
   convenience and will be modified appropriately if the WG decides on
   ICE in the JS.]

   Implementations MUST send keepalives no less frequently than every 30
   seconds regardless of whether traffic is flowing or not.  If a
   keepalive fails then the implementation MUST either attempt to find a
   new valid path via ICE or terminate media for that ICE component.
   Note that ICE [RFC5245]; Section 10 keepalives use STUN Binding
   Indications which are one-way and therefore not sufficient.  We will
   need to define a new mechanism for this.  [OPEN ISSUE:  what to do
   here.]

A.3.4.  IP Location Privacy

   As mentioned in Section 4.2.4 above, a side effect of the default ICE
   behavior is that the peer learns one's IP address, which leaks large
   amounts of location information, especially for mobile devices.  This
   has negative privacy consequences in some circumstances.  The



Rescorla                   Expires May 2, 2012                 [Page 29]


Internet-Draft              RTC-Web Security                October 2011


   following two API requirements are intended to mitigate this issue:

   API Requirement:  The API MUST provide a mechanism to suppress ICE
      negotiation (though perhaps to allow candidate gathering) until
      the user has decided to answer the call [note:  determining when
      the call has been answered is a question for the JS.]  This
      enables a user to prevent a peer from learning their IP address if
      they elect not to answer a call.

   API Requirement:  The API MUST provide a mechanism for the calling
      application to indicate that only TURN candidates are to be used.
      This prevents the peer from learning one's IP address at all.

A.3.5.  Communications Security

   Implementations MUST implement DTLS and DTLS-SRTP.  All data channels
   MUST be secured via DTLS.  DTLS-SRTP MUST be offered for every media
   channel and MUST be the default; i.e., if an implementation receives
   an offer for DTLS-SRTP and SDES and/or plain RTP, DTLS-SRTP MUST be
   selected.

   [OPEN ISSUE:  What should the settings be here?  MUST?]
   Implementations MAY support SDES and RTP for media traffic for
   backward compatibility purposes.

   API Requirement:  The API MUST provide a mechanism to indicate that a
      fresh DTLS key pair is to be generated for a specific call.  This
      is intended to allow for unlinkability.  Note that there are also
      settings where it is attractive to use the same keying material
      repeatedly, especially those with key continuity-based
      authentication.

   API Requirement:  The API MUST provide a mechanism to indicate that a
      fresh DTLS key pair is to be generated for a specific call.  This
      is intended to allow for unlinkability.

   API Requirement:  When DTLS-SRTP is used, the API MUST NOT permit the
      JS to obtain the negotiated keying material.  This requirement
      preserves the end-to-end security of the media.

   UI Requirements:    A user-oriented client MUST provide an
      "inspector" interface which allows the user to determine the
      security characteristics of the media. [largely derived from
      [I-D.kaufman-rtcweb-security-ui]







Rescorla                   Expires May 2, 2012                 [Page 30]


Internet-Draft              RTC-Web Security                October 2011


      The following properties SHOULD be displayed "up-front" in the
      browser chrome, i.e., without requiring the user to ask for them:

      *  A client MUST provide a user interface through which a user may
         determine the security characteristics for currently-displayed
         audio and video stream(s)
      *  A client MUST provide a user interface through which a user may
         determine the security characteristics for transmissions of
         their microphone audio and camera video.
      *  The "security characteristics" MUST include an indication as to
         whether or not the transmission is cryptographically protected
         and whether that protection is based on a key that was
         delivered out-of-band (from a server) or was generated as a
         result of a pairwise negotiation.
      *  If the far endpoint was directly verified Appendix A.3.6 the
         "security characteristics" MUST include the verified
         information.
      The following properties are more likely to require some "drill-
      down" from the user:

      *  If the transmission is cryptographically protected, the The
         algorithms in use (For example:  "AES-CBC" or "Null Cipher".)
      *  If the transmission is cryptographically protected, the
         "security characteristics" MUST indicate whether PFS is
         provided.
      *  If the transmission is cryptographically protected via an end-
         to-end mechanism the "security characteristics" MUST include
         some mechanism to allow an out-of-band verification of the
         peer, such as a certificate fingerprint or an SAS.

A.3.6.  Web-Based Peer Authentication

A.3.6.1.  Generic Concepts

   In a number of cases, it is desirable for the endpoint (i.e., the
   browser) to be able to directly identity the endpoint on the other
   side without trusting only the signaling service to which they are
   connected.  For instance, users may be making a call via a federated
   system where they wish to get direct authentication of the other
   side.  Alternately, they may be making a call on a site which they
   minimally trust (such as a poker site) but to someone who has an
   identity on a site they do trust (such as a social network.)

   Recently, a number of Web-based identity technologies (OAuth,
   BrowserID, Facebook Connect), etc. have been developed.  While the
   details vary, what these technologies share is that they have a Web-
   based (i.e., HTTP/HTTPS identity provider) which attests to your
   identity.  For instance, if I have an account at example.org, I could



Rescorla                   Expires May 2, 2012                 [Page 31]


Internet-Draft              RTC-Web Security                October 2011


   use the example.org identity provider to prove to others that I was
   alice@example.org.  The development of these technologies allows us
   to separate calling from identity provision:  I could call you on
   Poker Galaxy but identify myself as alice@example.org.

   Whatever the underlying technology, the general principle is that the
   party which is being authenticated is NOT the signaling site but
   rather the user (and their browser).  Similarly, the relying party is
   the browser and not the signaling site.  This means that the
   PeerConnection API MUST arrange to talk directly to the identity
   provider in a way that cannot be impersonated by the calling site.
   The following sections provide two examples of this.

A.3.6.2.  BrowserID

   BrowserID [https://browserid.org/] is a technology which allows a
   user with a verified email address to generate an assertion
   (authenticated by their identity provider) attesting to their
   identity (phrased as an email address).  The way that this is used in
   practice is that the relying party embeds JS in their site which
   talks to the BrowserID code (either hosted on a trusted intermediary
   or embedded in the browser).  That code generates the assertion which
   is passed back to the relying party for verification.  The assertion
   can be verified directly or with a Web service provided by the
   identity provider.  It's relatively easy to extend this functionality
   to authenticate RTC-Web calls, as shown below.

























Rescorla                   Expires May 2, 2012                 [Page 32]


Internet-Draft              RTC-Web Security                October 2011


   +----------------------+                     +----------------------+
   |                      |                     |                      |
   |    Alice's Browser   |                     |     Bob's Browser    |
   |                      | OFFER ------------> |                      |
   |   Calling JS Code    |                     |    Calling JS Code   |
   |          ^           |                     |          ^           |
   |          |           |                     |          |           |
   |          v           |                     |          v           |
   |    PeerConnection    |                     |    PeerConnection    |
   |       |      ^       |                     |       |      ^       |
   | Finger|      |Signed |                     |Signed |      |       |
   | print |      |Finger |                     |Finger |      |"Alice"|
   |       |      |print  |                     |print  |      |       |
   |       v      |       |                     |       v      |       |
   |   +--------------+   |                     |   +---------------+  |
   |   |  BrowserID   |   |                     |   |  BrowserID    |  |
   |   |  Signer      |   |                     |   |  Verifier     |  |
   |   +--------------+   |                     |   +---------------+  |
   |           ^          |                     |          ^           |
   +-----------|----------+                     +----------|-----------+
               |                                           |
               | Get certificate                           |
               v                                           | Check
   +----------------------+                                | certificate
   |                      |                                |
   |       Identity       |/-------------------------------+
   |       Provider       |
   |                      |
   +----------------------+

   The way this mechanism works is as follows.  On Alice's side, Alice
   goes to initiate a call.

   1.  The calling JS instantiates a PeerConnection and tells it that it
       is interested in having it authenticated via BrowserID.
   2.  The PeerConnection instantiates the BrowserID signer in an
       invisible IFRAME.  The IFRAME is tagged with an origin that
       indicates that it was generated by the PeerConnection (this
       prevents ordinary JS from implementing it).  The BrowserID signer
       is provided with Alice's fingerprint.  Note that the IFRAME here
       does not render any UI.  It is being used solely to allow the
       browser to load the BrowserID signer in isolation, especially
       from the calling site.
   3.  The BrowserID signer contacts Alice's identity provider,
       authenticating as Alice (likely via a cookie).
   4.  The identity provider returns a short-term certificate attesting
       to Alice's identity and her short-term public key.




Rescorla                   Expires May 2, 2012                 [Page 33]


Internet-Draft              RTC-Web Security                October 2011


   5.  The Browser-ID code signs the fingerprint and returns the signed
       assertion + certificate to the PeerConnection.  [Note:  there are
       well-understood Web mechanisms for this that I am excluding here
       for simplicity.]
   6.  The PeerConnection returns the signed information to the calling
       JS code.
   7.  The signed assertion gets sent over the wire to Bob's browser
       (via the signaling service) as part of the call setup.

   Obviously, the format of the signed assertion varies depending on
   what signaling style the WG ultimately adopts.  However, for
   concreteness, if something like ROAP were adopted, then the entire
   message might look like:

      {
        "messageType":"OFFER",
        "callerSessionId":"13456789ABCDEF",
        "seq": 1
        "sdp":"
      v=0\n
      o=- 2890844526 2890842807 IN IP4 192.0.2.1\n
      s= \n
      c=IN IP4 192.0.2.1\n
      t=2873397496 2873404696\n
      m=audio 49170 RTP/AVP 0\n
      a=fingerprint: SHA-1 \
      4A:AD:B9:B1:3F:82:18:3B:54:02:12:DF:3E:5D:49:6B:19:E5:7C:AB\n",
       "identity":{
          "identityType":"browserid",
            "assertion": {
            "digest":"<hash of fingerprint and session IDs>",
            "audience": "[TBD]"
            "valid-until": 1308859352261,
           }, // signed using user's key
           "certificate": {
             "email": "rescorla@gmail.com",
             "public-key": "<ekrs-public-key>",
             "valid-until": 1308860561861,
           } // certificate is signed by gmail.com
           }
      }

   Note that we only expect to sign the fingerprint values and the
   session IDs, in order to allow the JS or calling service to modify
   the rest of the SDP, while protecting the identity binding.  [OPEN
   ISSUE:  should we sign seq too?]

   [TODO:  NEed to talk about Audience a bit.]



Rescorla                   Expires May 2, 2012                 [Page 34]


Internet-Draft              RTC-Web Security                October 2011


   On Bob's side, he receives the signed assertion as part of the call
   setup message and a similar procedure happens to verify it.

   1.  The calling JS instantiates a PeerConnection and provides it the
       relevant signaling information, including the signed assertion.
   2.  The PeerConnection instantiates a BrowserID verifier in an IFRAME
       and provides it the signed assertion.
   3.  The BrowserID verifier contacts the identity provider to verify
       the certificate and then uses the key to verify the signed
       fingerprint.
   4.  Alice's verified identity is returned to the PeerConnection (it
       already has the fingerprint).
   5.  At this point, Bob's browser can display a trusted UI indication
       that Alice is on the other end of the call.

   When Bob returns his answer, he follows the converse procedure, which
   provides Alice with a signed assertion of Bob's identity and keying
   material.

A.3.6.3.  OAuth

   While OAuth is not directly designed for user-to-user authentication,
   with a little lateral thinking it can be made to serve.  We use the
   following mapping of OAuth concepts to RTC-Web concepts:

              +----------------------+----------------------+
              | OAuth                | RTCWeb               |
              +----------------------+----------------------+
              | Client               | Relying party        |
              | Resource owner       | Authenticating party |
              | Authorization server | Identity service     |
              | Resource server      | Identity service     |
              +----------------------+----------------------+

                                  Table 1

   The idea here is that when Alice wants to authenticate to Bob (i.e.,
   for Bob to be aware that she is calling).  In order to do this, she
   allows Bob to see a resource on the identity provider that is bound
   to the call, her identity, and her public key.  Then Bob retrieves
   the resource from the identity provider, thus verifying the binding
   between Alice and the call.









Rescorla                   Expires May 2, 2012                 [Page 35]


Internet-Draft              RTC-Web Security                October 2011


           Alice                       IDP                       Bob
           ---------------------------------------------------------
           Call-Id, Fingerprint  ------->
           <------------------- Auth Code
           Auth Code ---------------------------------------------->
                                        <----- Get Token + Auth Code
                                        Token --------------------->
                                        <------------- Get call-info
                                        Call-Id, Fingerprint ------>

   This is a modified version of a common OAuth flow, but omits the
   redirects required to have the client point the resource owner to the
   IDP, which is acting as both the resource server and the
   authorization server, since Alice already has a handle to the IDP.

   Above, we have referred to "Alice", but really what we mean is the
   PeerConnection.  Specifically, the PeerConnection will instantiate an
   IFRAME with JS from the IDP and will use that IFRAME to communicate
   with the IDP, authenticating with Alice's identity (e.g., cookie).
   Similarly, Bob's PeerConnection instantiates an IFRAME to talk to the
   IDP.

A.3.6.4.  Generic Identity Support

   I believe it's possible to build a generic interface between the
   PeerConnection and any identity sub-module so that the PeerConnection
   just gets pointed to the IDP (which the relying party either trusts
   or not) and JS from the IDP provides the concrete interfaces.
   However, I need to work out the details, so I'm not specifying this
   yet.  If it works, the previous two sections will just be examples.


Author's Address

   Eric Rescorla
   RTFM, Inc.
   2064 Edgewood Drive
   Palo Alto, CA  94303
   USA

   Phone:  +1 650 678 2350
   Email:  ekr@rtfm.com









Rescorla                   Expires May 2, 2012                 [Page 36]


Html markup produced by rfcmarkup 1.129c, available from https://tools.ietf.org/tools/rfcmarkup/