[Docs] [txt|pdf|xml|html] [Tracker] [WG] [Email] [Diff1] [Diff2] [Nits]

Versions: (draft-daboo-sieve-include) 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 RFC 6609

Network Working Group                                           C. Daboo
Internet-Draft                                                  A. Stone
Intended status: Standards Track                      September 27, 2011
Expires: March 30, 2012


                Sieve Email Filtering: Include Extension
                      draft-ietf-sieve-include-13

Abstract

   The Sieve Email Filtering "include" extension permits users to
   include one Sieve script inside another.  This can make managing
   large scripts or multiple sets of scripts much easier, and allows a
   site and its users to build up libraries of scripts.  Users are able
   to include their own personal scripts or site-wide scripts.

Status of this Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at http://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on March 30, 2012.

Copyright Notice

   Copyright (c) 2011 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.



Daboo & Stone            Expires March 30, 2012                 [Page 1]


Internet-Draft          Sieve Extension: Include          September 2011


Table of Contents

   1.  Introduction and Overview  . . . . . . . . . . . . . . . . . .  3
   2.  Conventions Used in This Document  . . . . . . . . . . . . . .  3
   3.  Include Extension  . . . . . . . . . . . . . . . . . . . . . .  3
     3.1.  General Considerations . . . . . . . . . . . . . . . . . .  3
     3.2.  Control Structure include  . . . . . . . . . . . . . . . .  5
     3.3.  Control Structure return . . . . . . . . . . . . . . . . .  8
     3.4.  Interaction with Variables . . . . . . . . . . . . . . . .  8
       3.4.1.  Control Structure global . . . . . . . . . . . . . . .  8
       3.4.2.  Variables Namespace global . . . . . . . . . . . . . . 10
   4.  Security Considerations  . . . . . . . . . . . . . . . . . . . 11
   5.  IANA Considerations  . . . . . . . . . . . . . . . . . . . . . 11
     5.1.  "include" Extension Registration . . . . . . . . . . . . . 12
   6.  References . . . . . . . . . . . . . . . . . . . . . . . . . . 12
     6.1.  Normative References . . . . . . . . . . . . . . . . . . . 12
     6.2.  Informative References . . . . . . . . . . . . . . . . . . 12
   Appendix A.  Acknowledgments . . . . . . . . . . . . . . . . . . . 12
   Appendix B.  Change History (to be removed prior to
                publication as an RFC)  . . . . . . . . . . . . . . . 12
   Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . . 15






























Daboo & Stone            Expires March 30, 2012                 [Page 2]


Internet-Draft          Sieve Extension: Include          September 2011


1.  Introduction and Overview

   It's convenient to be able to break SIEVE [RFC5228] scripts down into
   smaller components which can be reused in a variety of different
   circumstances.  For example, users may want to have a default script
   and a special 'vacation' script, the latter being activated when the
   user goes on vacation.  In that case the default actions should
   continue to be run, but a vacation command should be executed first.
   One option is to edit the default script to add or remove the
   vacation command as needed.  Another is to have a vacation script
   that simply has a vacation command and then includes the default
   script.


2.  Conventions Used in This Document

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in [RFC2119].

   Conventions for notations are as in SIEVE [RFC5228] Section 1.1.

   The following key phrases are used to describe scripts and script
   execution:

   script
      a valid Sieve script.

   script execution
      an instance of a Sieve interpreter invoked for a given message
      delivery, starting with the user's active script and continuing
      through any included scripts until the final disposition of the
      message (e.g. delivered, forwarded, discarded, rejected, etc.).

   immediate script
      the individual Sieve script file being executed.

   including script
      the individual Sieve script file that had an include statement
      which included the immediate script.


3.  Include Extension

3.1.  General Considerations

   Sieve implementations that implement the "include", "return", and
   "global" commands described below have an identifier of "include" for



Daboo & Stone            Expires March 30, 2012                 [Page 3]


Internet-Draft          Sieve Extension: Include          September 2011


   use with the capability mechanism.  If any of the "include",
   "return", or "global" commands are used in a script, the "include"
   capability MUST be listed in the "require" statement in that script.

   Sieve implementations need to track the use of actions in included
   scripts so that implicit "keep" behavior can be properly determined
   based on whether any actions have executed in any script.

   Sieve implementations are allowed to limit the total number of nested
   included scripts, but MUST provide for a total of at least three
   levels of nested scripts including the top-level script.  An error
   MUST be generated either when the script is uploaded to the Sieve
   repository, or when the script is executed, if any nesting limit is
   exceeded.  If such an error is detected whilst processing a Sieve
   script, an implicit "keep" action MUST be executed to prevent loss of
   any messages.

   Sieve implementations MUST NOT allow recursive script inclusion.  An
   error MUST be generated when such a script is executed.  An error
   SHOULD be generated when such a script is marked active with
   MANAGESIEVE [RFC5804] or similar mechanisms.  Implementations MUST
   NOT generate errors for recursive inclusions at upload time, as this
   would force an upload ordering requirement upon script authors /
   generators.  However, if an active script is replaced with a faulty
   script and would remain the active script, an error MUST be generated
   and the upload MUST fail.  If an include recursion error is detected
   during script execution, an implicit "keep" action MUST be executed
   to prevent loss of any messages.

   Sieve implementations MUST generate an error at execution time if an
   included script does not exist, except when the ":optional" parameter
   is specified.  Implementations MUST NOT generate errors for scripts
   missing at upload time, as this would force an upload ordering
   requirement upon script authors / generators.

   If the Sieve "variables" extension [RFC5229] is present, an issue
   arises with the "scope" of variables defined in scripts that may
   include each other.  For example, if a script defines the variable
   "${status}" with one particular meaning or usage, and another defines
   "${status}" with a different meaning, then if one script includes the
   other there is an issue as to which "${status}" is being referenced.
   To solve this problem, Sieve implementations MUST follow the scoping
   rules defined in Section 3.4 and support the "global" command defined
   there.







Daboo & Stone            Expires March 30, 2012                 [Page 4]


Internet-Draft          Sieve Extension: Include          September 2011


3.2.  Control Structure include

      Usage:  include [LOCATION] [":once"] [":optional"] <value: string>

              LOCATION = ":personal" / ":global"

   The "include" command takes an optional "location" parameter, an
   optional ":once" parameter, an optional ":optional" parameter, and a
   single string argument representing the name of the script to include
   for processing at that point.  Implementations MUST restrict script
   names according to MANAGESIEVE [RFC5804], Section 1.6.  The script
   name argument MUST be a constant string as defined in VARIABLES
   [RFC5229], Section 3; implementations MUST NOT expand variables in
   the script name argument.

   The "location" parameter MUST default to ":personal" if not
   specified.  The "location" parameter MUST NOT be specified more than
   once.  The "location" has the following meanings:

   :personal
      Indicates that the named script is stored in the user's own
      personal (private) Sieve repository.

   :global
      Indicates that the named script is stored in a site-wide Sieve
      repository, accessible to all users of the Sieve system.

   The ":once" parameter tells the interpreter only to include the named
   script if it has not already been included at any other point during
   script execution.  If the script has already been included,
   processing continues immediately following the include command.
   Implementations MUST NOT generate an error if an "include :once"
   command names a script whose inclusion would be recursive; in this
   case, the script MUST be considered previously included and therefore
   "include :once" will not include it again.

   Note: It is RECOMMENDED that script authors / generators use the
   ":once" parameter only when including a script that performs general
   duties such as declaring global variables and making sanity checks of
   the environment.

   The ":optional" parameter indicates that the script may be missing.
   Ordinarily, an implementation MUST generate an error during execution
   if an include command specifies a script that does not exist.  When
   ":optional" is specified, implementations MUST NOT generate an error
   for a missing script, and MUST continue as if the include command had
   not been present.




Daboo & Stone            Expires March 30, 2012                 [Page 5]


Internet-Draft          Sieve Extension: Include          September 2011


   The included script MUST be a valid Sieve script.  Each script MUST
   have its own "require" statements for all optional capabilities used
   by that script.  The scope of a "require" statement is the script in
   which it immediately appears, and neither inherits nor passes on
   capabilities to other scripts during the course of execution.

   A "stop" command in an included script MUST stop all script
   processing, including the processing of the scripts that include the
   immediate one.  The "return" command (described below) stops
   processing of the immediate script only, and allows the scripts that
   include it to continue.

   The "include" command MAY appear anywhere in a script where a control
   structure is legal, and MAY be used within another control structure,
   e.g., within an "if" or "foreverypart" block (MIME [RFC5703]).  The
   included script SHALL NOT have any special control over the control
   structure it was included from, e.g., inclusion from within a
   "foreverypart" block does not allow the included script to directly
   terminate or continue flow of that block.

   Examples:

   The user has four scripts stored in their personal repository:

   "default"

      This is the default active script that includes several others.


      require ["include"];

      include :personal "always_allow";
      include :global "spam_tests";
      include :personal "spam_tests";
      include :personal "mailing_lists";

   Personal script "always_allow"

      This script special-cases some correspondent email addresses and
      makes sure any message containing those addresses are always kept.











Daboo & Stone            Expires March 30, 2012                 [Page 6]


Internet-Draft          Sieve Extension: Include          September 2011


      if address :is "from" "boss@example.com"
      {
          keep;
      }
      elsif address :is "from" "ceo@example.com"
      {
          keep;
      }

   Personal script "spam_tests" (uses "reject" [RFC5429])

      This script does some user-specific spam tests to catch spam
      messages not caught by the site-wide spam tests.


      require ["reject"];

      if header :contains "Subject" "XXXX"
      {
          reject "Subject XXXX is unacceptable.";
      }
      elsif address :is "from" "money@example.com"
      {
          reject "Mail from this sender is unwelcome.";
      }

   Personal script "mailing_lists"

      This script looks for messages from different mailing lists and
      files each into a mailbox specific to the mailing list.


      require ["fileinto"];

      if header :is "List-ID" "sieve.ietf.org"
      {
          fileinto "lists.sieve";
      }
      elsif header :is "List-ID" "ietf-imapext.imc.org"
      {
          fileinto "lists.imapext";
      }

   There is one script stored in the global repository:

   Site script "spam_tests" (uses "reject" [RFC5429])





Daboo & Stone            Expires March 30, 2012                 [Page 7]


Internet-Draft          Sieve Extension: Include          September 2011


      This script does some site-wide spam tests which any user at the
      site can include in their own scripts at a suitable point.  The
      script content is kept up to date by the site administrator.


      require ["reject"];

      if anyof (header :contains "Subject" "$$",
                header :contains "Subject" "Make money")
      {
          reject "No thank you.";
      }

3.3.  Control Structure return

      Usage:  return

   The "return" command stops processing of the immediately included
   script only and returns processing control to the script which
   includes it.  If used in the main script (i.e., not in an included
   script), it has the same effect as the "stop" command, including the
   appropriate "keep" action if no other actions have been executed up
   to that point.

3.4.  Interaction with Variables

   In order to avoid problems of variables in an included script
   "overwriting" those from the script that includes it, this
   specification requires that all variables defined in a script MUST be
   kept "private" to the immediate script by default - that is, they are
   not "visible" to other scripts.  This ensures that two script authors
   cannot inadvertently cause problems by choosing the same name for a
   variable.

   However, sometimes there is a need to make a variable defined in one
   script available to others.  This specification defines the new
   command "global" to declare that a variable is shared among scripts.
   Effectively, two namespaces are defined: one local to the immediate
   script, and another shared among all scripts.  Implementations MUST
   allow a non-global variable to have the same name as a global
   variable but have no interaction between them.

3.4.1.  Control Structure global

      Usage:  global <value: string-list>

   The "global" command accepts a string list argument that defines one
   or more names of variables to be stored in the global variable space.



Daboo & Stone            Expires March 30, 2012                 [Page 8]


Internet-Draft          Sieve Extension: Include          September 2011


   Each name MUST be a constant string and conform to the syntax of
   variable-name as defined in VARIABLES [RFC5229], Section 3.  Match
   variables cannot be specified and namespace prefixes are not allowed.
   An invalid name MUST be detected as a syntax error.

   The "global" command is only available when the script has both
   "include" and "variables" in its require line.  If the "global"
   command appears when only "include" or only "variables" has been
   required, an error MUST be generated when the script is uploaded.

   If a "global" command is given the name of a variable that has
   previously been defined in the immediate script with "set", an error
   MUST be generated either when the script is uploaded or at execution
   time.

   If a "global" command lists a variable that has not been defined in
   the global namespace, the name of the variable is now marked as
   global, and any subsequent "set" command will set the value of the
   variable in global scope.

   A variable has global scope in all scripts that have declared it with
   the "global" command.  If a script uses that variable name without
   declaring it global, the name specifies a separate, non-global
   variable within that script.

   Interpretation of a string containing a variable marked as global,
   but without any value set, SHALL behave as any other access to an
   unknown variable, as specified in VARIABLES [RFC5229], Section 3
   (i.e., evaluates to an empty string).

   Example:

   The active script

      The included script may contain repetitive code that is
      effectively a subroutine that can be factored out.  In this
      script, the test which matches last will leave its value in the
      test_mailbox variable and the top-level script will file the
      message into that mailbox.  If no tests matched, the message will
      be implicitly kept in the INBOX.











Daboo & Stone            Expires March 30, 2012                 [Page 9]


Internet-Draft          Sieve Extension: Include          September 2011


      require ["fileinto", "include", "variables", "relational"];
      global "test";
      global "test_mailbox";

      set "test" "$$";
      include "subject_tests";

      set "test" "Make money";
      include "subject_tests";

      if string :count "eq" "${test_mailbox}" "1"
      {
          fileinto "${test_mailbox}";
          stop;
      }

   Personal script "subject_tests"

      This script performs a number of tests against the message, sets
      the global test_mailbox variable with a folder to file the message
      into, then falls back to the top-level script.


      require ["include", "variables"];
      global ["test", "test_mailbox"];

      if header :contains "Subject" "${test}"
      {
          set "test_mailbox" "spam-${test}";
      }

3.4.2.  Variables Namespace global

   In addition to the "global" command, this document defines the
   variables namespace "global", as specified in VARIABLES [RFC5229],
   Section 3.  The global namespace has no sub-namespaces (e.g., 'set
   "global.data.from" "me@example.com";' is not allowed).  The variable-
   name part MUST be a valid identifier (e.g., 'set "global.12"
   "value";' is not valid because "12" is not a valid identifier).

   Example:

      require ["variables", "include"];

      set "global.i_am_on_vacation" "1";

   Variables declared global and variables accessed via the global
   namespace MUST be one and the same.  In the following example script,



Daboo & Stone            Expires March 30, 2012                [Page 10]


Internet-Draft          Sieve Extension: Include          September 2011


   we see the variable "i_am_on_vacation" used in a "global" command,
   and again with the "global." namespace.  Consider these as two
   syntaxes with identical meaning.

   Example:

      require ["variables", "include", "vacation"];
      global "i_am_on_vacation";

      set "global.i_am_on_vacation" "1";

      if string :is "${i_am_on_vacation}" "1"
      {
          vacation "It's true, I am on vacation.";
      }


4.  Security Considerations

   Sieve implementations MUST ensure adequate security for the global
   script repository to prevent unauthorized changes to global scripts.
   For example, a site policy might enable only certain users with
   administrative privileges to modify the global scripts.  Site are
   advised against allowing all users to have write access to the site's
   global scripts.

   Sieve implementations MUST ensure that script names are checked for
   validity and proper permissions prior to inclusion, in order to
   prevent a malicious user from gaining access to files accessible to
   the mail server software that should not be accessible to the user.

   Sieve implementations MUST ensure that script names are safe for use
   with their storage system.  An error MUST be generated either when
   the script is uploaded or at execution time for a script including a
   name that could be used as a vector to attack the storage system.

   Beyond these, the "include" extension does not raise any security
   considerations that are not present in the base SIEVE [RFC5228]
   document and the VARIABLES [RFC5229] extension.


5.  IANA Considerations

   The following template specifies the IANA registration of the Sieve
   extension specified in this document:






Daboo & Stone            Expires March 30, 2012                [Page 11]


Internet-Draft          Sieve Extension: Include          September 2011


5.1.  "include" Extension Registration

      Capability name: include
      Description:     adds the "include" command to execute other Sieve
                       scripts, the "return" action from an included
                       script, and the "global" command and "global"
                       variables namespace to access variables shared
                       among included scripts.
      RFC number:      this RFC
      Contact address: the Sieve discussion list <sieve@ietf.org>


6.  References

6.1.  Normative References

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119, March 1997.

   [RFC5228]  Guenther, P. and T. Showalter, "Sieve: An Email Filtering
              Language", RFC 5228, January 2008.

   [RFC5229]  Homme, K., "Sieve Email Filtering: Variables Extension",
              RFC 5229, January 2008.

   [RFC5804]  Melnikov, A. and T. Martin, "A Protocol for Remotely
              Managing Sieve Scripts", RFC 5804, July 2010.

6.2.  Informative References

   [RFC5429]  Stone, A., "Sieve Email Filtering: Reject and Extended
              Reject Extensions", RFC 5429, March 2009.

   [RFC5703]  Hansen, T. and C. Daboo, "Sieve Email Filtering: MIME Part
              Tests, Iteration, Extraction, Replacement, and Enclosure",
              RFC 5703, October 2009.


Appendix A.  Acknowledgments

   Thanks to Ken Murchison, Rob Siemborski, Alexey Melnikov, Marc Mutz,
   Kjetil Torgrim Homme, Stephan Bosch, Arnt Gulbrandsen, Barry Leiba,
   and Jeffrey Hutzelman for comments and corrections.


Appendix B.  Change History (to be removed prior to publication as an
             RFC)




Daboo & Stone            Expires March 30, 2012                [Page 12]


Internet-Draft          Sieve Extension: Include          September 2011


   Changes from ietf-12 to ietf-13:

   a.  Nits from Stephan Bosch.

   b.  Nits from Robert Burrell Donkin.

   Changes from ietf-11 to ietf-12:

   a.  Nits from Alexey Melnikov.

   b.  Nits from Barry Leiba.

   Changes from ietf-10 to ietf-11:

   a.  Nits from Dilyan Palauzov.

   b.  Nits from Stephan Bosch.

   c.  Nits from Alexey Melnikov.

   Changes from ietf-09 to ietf-10:

   a.  Another example script error caught by Stephan Bosch.

   b.  Add :optional argument to allow a missing script to be ignored.

   Changes from ietf-08 to ietf-09:

   a.  Better variables language from Stephan Bosch.

   Changes from ietf-07 to ietf-08:

   a.  Nits from Stephan Bosch.

   b.  Nits from Barry Leiba.

   c.  Wordsmithing and layout wrangling.

   Changes from ietf-06 to ietf-07:

   a.  Nits from Stephan Bosch.

   Changes from ietf-05 to ietf-06:

   a.  Nits from Barry Leiba.

   Changes from ietf-04 to ietf-05:




Daboo & Stone            Expires March 30, 2012                [Page 13]


Internet-Draft          Sieve Extension: Include          September 2011


   a.  Integrate review from Barry Leiba.

   Changes from ietf-03 to ietf-04:

   a.  No changes.

   Changes from ietf-02 to ietf-03:

   a.  Setting a variable then calling global on it is an error
       (something like 'use strict').

   b.  Specify that the 'global' keyword is only available when
       'variables' has also been required.

   c.  Uploading a script that includes a nonexistent script is not an
       error at upload time.

   Changes from ietf-01 to ietf-02:

   a.  Require that script names must be constant strings, not subject
       to variable expansion.

   b.  Try the phrase immediate script instead of current script.

   c.  Clarify that "global 'varname'" and "global.varname" refer to the
       same variable.

   d.  Drop the requirement the global keywords come after require and
       before anything else.

   Changes from ietf-00 to ietf-01:

   a.  Replaced import/export with global.

   b.  Added :once modifier to include.

   c.  Added global namespace to see if it holds water.

   Changes from daboo-06 to ietf-00:

   a.  None

   Changes from -05 to -06:

   a.  Aaron Stone joins as author.

   b.  Removed | characters from the script examples.




Daboo & Stone            Expires March 30, 2012                [Page 14]


Internet-Draft          Sieve Extension: Include          September 2011


   c.  Updated draft references to published RFCs.

   Changes from -04 to -05:

   a.  Fixed examples.

   b.  Relaxed requirement that imported/exported variables be set
       before being used.

   Changes from -03 to -04:

   a.  Fixed missing 2119 definitions.

   b.  Defined interaction with variables through use of import and
       export commands.

   Changes from -02 to -03:

   a.  Refreshing expired draft (updated for nits).

   b.  Syntax -> Usage.

   c.  Updated to 3028bis reference.

   Changes from -01 to -02:

   a.  Minor formatting changes only - refreshing expired draft.

   Changes from -00 to -01:

   a.  Added IPR boiler plate.

   b.  Re-ordered sections at start to conform to RFC style.

   c.  Moved recursion comment into General Considerations section.

   d.  Switched to using optional parameter to indicate personal vs
       global.

   e.  Explicitly state that an error occurs when a missing script is
       included.










Daboo & Stone            Expires March 30, 2012                [Page 15]


Internet-Draft          Sieve Extension: Include          September 2011


Authors' Addresses

   Cyrus Daboo

   Email: cyrus@daboo.name


   Aaron Stone

   Email: aaron@serendipity.cx









































Daboo & Stone            Expires March 30, 2012                [Page 16]


Html markup produced by rfcmarkup 1.129c, available from https://tools.ietf.org/tools/rfcmarkup/