Network Working Group A. Kato Internet-Draft NTT TechnoCross Corporation Intended status: Experimental T. Kobayashi Expires: September 19, 2018 Y. Kawahara T. Kim T. Saito NTT March 18, 2018 The threat of Pairing based cryptographic protocols. draft-kato-threat-pairing-01 Abstract Pairing is a special map from two elliptic curves that called Pairing-friendly curves to a finite field and is useful mathematical tools for constructing cryptographic primitives. At CRYPTO 2016, Kim and Barbulescu proposed an efficient number field sieve algorithm for the discrete logarithm problem in a finite field. The security of pairing-based cryptography is based on the difficulty in solving the DLP. Hence, it has become necessary to shift the parameters that the DLP is computationally infeasible against the efficient number field sieve algorithms. This memo introduce Optimal Ate Pairing and two pairing-friendly curves with parameters of pairing against efficient number field sieve algorithms. Status of This Memo This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet- Drafts is at https://datatracker.ietf.org/drafts/current/. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." This Internet-Draft will expire on September 19, 2018. Kato, et al. Expires September 19, 2018 [Page 1]

Internet-Draft Threat of Pairing March 2018 Copyright Notice Copyright (c) 2018 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License. Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 3 1.1. Requirements Terminology . . . . . . . . . . . . . . . . 3 2. Preliminaries . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1. Elliptic Curve . . . . . . . . . . . . . . . . . . . . . 4 2.2. Bilinear Map . . . . . . . . . . . . . . . . . . . . . . 4 3. Pairing-friend curves and Domain Parameter Specification . . 5 3.1. Notation for Domain Parameters . . . . . . . . . . . . . 5 3.2. Efficient Domain Parameters for BN462 . . . . . . . . . . 7 3.2.1. Domain Parameters by Beuchat et al. . . . . . . . . . 7 3.3. Efficient Domain Parameters for BLS48 . . . . . . . . . . 9 3.3.1. Domain Parameters by Kiyomura et al. . . . . . . . . 9 4. Optimal Ate Pairing . . . . . . . . . . . . . . . . . . . . . 12 4.1. Guide for Decision on Parameters for Optimal Ate Pairing 13 4.2. Miller Loop . . . . . . . . . . . . . . . . . . . . . . . 14 4.3. Straight Line Function . . . . . . . . . . . . . . . . . 15 5. Algorithm Identifiers . . . . . . . . . . . . . . . . . . . . 15 6. Security Considerations . . . . . . . . . . . . . . . . . . . 15 6.1. 128-bit Secure PFC . . . . . . . . . . . . . . . . . . . 16 6.2. 256-bit Secure PFC . . . . . . . . . . . . . . . . . . . 16 7. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . 17 8. Change log . . . . . . . . . . . . . . . . . . . . . . . . . 17 9. References . . . . . . . . . . . . . . . . . . . . . . . . . 17 9.1. Normative References . . . . . . . . . . . . . . . . . . 17 9.2. Informative References . . . . . . . . . . . . . . . . . 17 Appendix A. Test Vectors of Optimal Ate Pairing . . . . . . . . 19 Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 19 Kato, et al. Expires September 19, 2018 [Page 2]

Internet-Draft Threat of Pairing March 2018 1. Introduction Pairing is a special map from two elliptic curves that called Pairing friendly curves (PFCs) to a finite field and is useful mathematical tools for constructing cryptographic primitives. It allows us to construct powerful primitives like Identity-Based Encryption (IBE) [5] and Functional Encryption (FE) [6]. The IBE and FE provide a rich decryption condition. Some Pairing-Based Cryptography is specified in IETF. (e.g. [3] and [4]) There are some types of pairing[14] and its choice has an impact on the performance of the primitive. For example, primitives by using Tate Pairing [3] and Ate Pairing [4] are specified in IETF. We need to choose an appropriate type of elliptic curve and parameters for the pairing-based cryptographic schemes, because the choice has great impact on security and efficiency of these schemes. However, an RFC on elliptic curves with pairings has not yet been provided in the IETF. In some open source softwares ([7], [8], and [9]) are implemented by Optimal Ate Pairing which is an improvement of Ate Pairing with 254-bit prime order Barreto and Naehrig curve. At CRYPTO 2016, Kim and Barbulescu proposed an efficient number field sieve(NSF) algorithm for the discrete logarithm problem in a finite field[11]. The security of pairing-based cryptography is based on the difficulty in solving the DLP. Hence, it has become necessary to shift the parameters that the DLP is computationally infeasible against the efficient NSF algorithms. This memo introduce Optimal Ate Pairing [2] for two PFCs to be able to shift the parameters. It enables us to reduce the cost for describing the body of Optimal Ate Pairing when Optimal Ate Pairing is specified over additional curves in IETF. Furthermore, this memo provides concrete algorithm for Optimal Ate Pairing over BLS-curves Section 3 and its test vectors. This memo is expected to use by combining Optimal Ate Pairing with a suitable PFC for a primitive in order to realize same functional structure of ECDSA and ECDH. (i.e., DSA over elliptic curve and DH over elliptic curve) 1.1. Requirements Terminology The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this memo are to be interpreted as described in [1]. Kato, et al. Expires September 19, 2018 [Page 3]

Internet-Draft Threat of Pairing March 2018 2. Preliminaries In this section, we introduce the definition of elliptic curve and bilinear map, notation used in this memo. 2.1. Elliptic Curve Throughout this memo, let p > 3 be a prime, q = p^n, and n be a natural number. Also, let F_q be a finite field. The curve defined by the following equation E is called an elliptic curve. E : y^2 = x^3 + A * x + B such that A, B are in F_q, 4 * A^3 + 27 * B^2 != 0 mod F_q Solutions (x, y) for an elliptic curve E, as well as the point at infinity, are called F_q-rational points. The additive group is constructed by an well-defined operation in the set of F_q-rational points. Typically, the cyclic additive group with prime order r and the base point G in its group is used for the cryptographic applications. Furthermore, we define terminology used in this memo as follows. O_E: the point at infinity over elliptic curve E. #E(F_q): number of points on an elliptic curve E over F_q. cofactor h: h = #E(F_p)/r. embedding degree k: minimum integer k such that r is a divisor of q^k - 1 2.2. Bilinear Map Let G_1 be an additive group of prime order r and let G_2 and G_3 be additive and multiplicative groups, respectively, of the same order. Let P, Q be generators of G_1, G_2 respectively. We say that (G_1, G_2, G_3) are asymmetric bilinear map groups if there exists a bilinear map e: (G_1, G_2) -> G_3 satisfying the following properties: (1) Bilinearity: for any S in G_1, for any T in G_2, for any a, b in Z_r, we have the relation e([a]S, [b]T) = e(S, T)^{a * b}. (2) Non-degeneracy: for any T in G_2, e(S, T) = 1 if and only if S = O_E. Similarly, for any S in G_1, e(S, T) = 1 if and only if T = O_E. Kato, et al. Expires September 19, 2018 [Page 4]

Internet-Draft Threat of Pairing March 2018 (3) Computability: for any S in G_1, for any T in G_2, the bilinear map is efficiently computable. 3. Pairing-friend curves and Domain Parameter Specification In this section, this memo specifies the domain parameters for 128-bit and 256-bit secure elliptic curves which allow us to efficiently compute the operation of a pairing at appropriate levels of security. We introduce 462-bit Barreto Naehrig (BN462)[13] curve as 128-bit secure elliptic curve and 581-bit Barreto Lynn Scott (BLS48)[12]. curve as 256-bit secure elliptic curve. 3.1. Notation for Domain Parameters Here, we define notations for specifying domain parameters and explain types of pairing friendly curves. The elliptic curves E over F_p satisfy following equation. y^2 = x^3 + B for B in F_p These domain parameters are described in the following way. For the elliptic curve E(F_p) on BN462 G1-Curve-ID is an identifier of the G_1 curve with which the curve can be referenced. p_b is a prime specifying a base field F_p. B is the coefficient of the equation y^2 = x^3 + B mod p defining E. G = (x, y) is the base point, i.e., a point with x and y being its x- and y-coordinates in E, respectively. r is the prime order of the group generated by G. h is the cofactor of G in E(F_p) For twisted curve E'(F_{p^2}) on BN462 G2-Curve-ID is an identifier of the G_2 curve with which the curve can be referenced. p_b is a prime specifying a base field. Kato, et al. Expires September 19, 2018 [Page 5]

Internet-Draft Threat of Pairing March 2018 B' is the coefficient of the equation y'^2 = x'^3 + B' mod F_p^2 defining E'. G' = (x', y') is the base point, i.e., a point with x' and y' being its x'- and y'-coordinates in E', respectively. r' is the prime order of the group generated by G'. h' is the cofactor of r' in #E'(F_{p^2}) For F_{p^12}^* on BN462 G3-Field-ID is an identifier of the F_{p^12}^*. p_b is a prime specifying base field. r'' is the prime order of the group. h'' is the cofactor of r in F_{p^12}^* s.t. h'' = h''_1 * h''_2 h''_1 is the part of cofactor of r in F_{p^12}^* s.t. h''_1 = (p^4 - p^2 + 1)/r h''_2 is the part of cofactor of r in F_{p^12}^* s.t. h''_2 = (p^6 - 1) * (p^2 + 1) For the elliptic curve E(F_p) on BLS48 G1-Curve-ID is an identifier of the G_1 curve with which the curve can be referenced. p_b is a prime specifying a base field F_p. B is the coefficient of the equation y^2 = x^3 + B mod p defining E. G = (x, y) is the base point, i.e., a point with x and y being its x- and y-coordinates in E, respectively. r is the prime order of the group generated by G. h is the cofactor of G in E(F_p) For twisted curve E'(F_{p^8}) on BLS48 G2-Curve-ID is an identifier of the G_2 curve with which the curve can be referenced. Kato, et al. Expires September 19, 2018 [Page 6]

Internet-Draft Threat of Pairing March 2018 p_b' is a prime specifying a base field. B' is the coefficient of the equation y'^2 = x'^3 + B' mod F_p^2 defining E'. G' = (x', y') is the base point, i.e., a point with x' and y' being its x'- and y'-coordinates in E', respectively. r' is the prime order of the group generated by G'. h' is the cofactor of r' in #E'(F_{p^8}). For F_{p^48}^* on BLS48 G3-Field-ID is an identifier of the F_{p^48}^*. p_b is a prime specifying a base field. r'' is the prime order of the group generated by G'. h'' is the cofactor of r' in #E'(F_{p^48}). For the definition of the pairing parameter Pairing-Param-ID is the set of the identifiers G1-Curve-ID, G2- Curve-ID and G3-Field-ID. 3.2. Efficient Domain Parameters for BN462 This section specifies the domain parameters for four 128-bit secure elliptic curves BN462. 3.2.1. Domain Parameters by Beuchat et al. The domain parameters described in this subsection are defined by elliptic curve E(F_p) : y^2 = x^3 + 5 and sextic twist E'(F_{p^2}) : x'^3 + 5/s = x'^3 + 2 - u, where F_{p^2} = F_p[u]/(u^2 + 1), F_{p^6} = F_{p^2}[v]/(v^3 - u), F_{p^12} = F_{p^6}[w]/(w^2 - v), s = - 5/u. We describe domain parameters of elliptic curves E and E'. The parameter p_b is 1 mod 8. G1-Curve-ID: Fp462nBN p_b = 0x240480360120023ffffffffff6ff0cf6b7d9bfca000000 0000d812908f41c8020ffffffffff6ff66fc6ff687f640000 000002401b00840138013 Kato, et al. Expires September 19, 2018 [Page 7]

Internet-Draft Threat of Pairing March 2018 x = 0x21a6d67ef250191fadba34a0a30160b9ac9264b6f95f 63b3edbec3cf4b2e689db1bbb4e69a416a0b1e79239c037 2e5cd70113c98d91f36b6980d y = 0x0118ea0460f7f7abb82b33676a7432a490eeda842ccc fa7d788c659650426e6af77df11b8ae40eb80f475432c666 00622ecaa8a5734d36fb03de; r = 0x240480360120023ffffffffff6ff0cf6b7d9bfca000000 0000d812908ee1c201f7fffffffff6ff66fc7bf717f7c000 0000002401b007e010800d h = 1 G2-Curve-ID: Fp462n2BN p_b = 0x240480360120023ffffffffff6ff0cf6b7d9bfca000000 0000d812908f41c8020ffffffffff6ff66fc6ff687f640000 000002401b00840138013 B' = 2 - u x' = 0x1d2e4343e8599102af8edca849566ba3c98e2a354730cb ed9176884058b18134dd86bae555b783718f50af8b59bf7e 850e9b73108ba6aa8cd283*u + 0x257ccc85b58dda0dfb38e3a8cbdc5482e0337e7c1cd9 6ed61c913820408208f9ad2699bad92e0032ae1f0aa6a8b4 8807695468e3d934ae1e4df y' = 0x73ef0cbd438cbe0172c8ae37306324d44d5e6b0c69ac5 7b393f1ab370fd725cc647692444a04ef87387aa68d53743 493b9eba14cc552ca2a93a*u + 0xa0650439da22c1979517427a20809eca035634706e23c3f a7a6bb42fe810f1399a1f41c9ddae32e03695a140e7b11d 7c3376e5b68df0db7154e r' = r h' = 0x240480360120023ffffffffff6ff0cf6b7d9bfca0000000000 d812908fa1ce0227fffffffff6ff66fc63f5f7f4c000000000 2401b008a0168019 G3-Field-ID: Fp462n12 p_b = 0x240480360120023ffffffffff6ff0cf6b7d9bfca000000 0000d812908f41c8020ffffffffff6ff66fc6ff687f640000 000002401b00840138013 Kato, et al. Expires September 19, 2018 [Page 8]

Internet-Draft Threat of Pairing March 2018 r'' = r h'' = (TBD) h''_1 = (TBD) h''_2 = (TBD) Pairing-Param-ID: Fp462BN = { G1-Curve-ID: Fp462nBN G2-Curve-ID: Fp462n2BN G3-Field-ID: Fp462n12BN } 3.3. Efficient Domain Parameters for BLS48 This section specifies the domain parameters for four 256-bit secure elliptic curves BLS48. 3.3.1. Domain Parameters by Kiyomura et al. The domain parameters described in this subsection are defined by elliptic curve E(F_p) : y^2 = x^3 + 1 and following tower structures E'(F_{p^8}) : y^2 = x^3 -1/w, where F_{p^2} = F_p[u]/(u^2 + 1), F_{p^4} = F_{p^2}[v]/(v^2 + u + 1), F_{p^8} = F_{p^4}[w]/(w^2 + v), F_{p^24} = F_{p^8}[z]/(z^3 + w), F_{p^48} = F_{p^24}[s]/(s^2 + z). G1-Curve-ID: Fp581nBLS48 p_b = 0x1280f73ff3476f313824e31d47012a0056e84f8d122131bb3be6c0f1f3975444 a48ae43af6e082acd9cd30394f4736daf68367a5513170ee0a578fdf721a4a48ac 3ed c154e6565912b x = 0x02af59b7ac340f2baf2b73df1e93f860de3f257e0e86868cf61abdba edffb9f7544550546a9df6f9645847665d859236ebdbc57db368b11786cb 74da5d3a1e6d8c3bce8732315af640 y = 0x0cefda44f6531f91f86b3a2d1fb398a488a553c9efeb8a52e991279d d41b720ef7bb7beffb98aee53e80f678584c3ef22f487f77c2876d1b2e35 f37aef7b926b576dbb5de3e2587a70 r = 0x2386f8a925e2885e233a9ccc1615c0d6c635387a3f0b3cbe003fad6bc972 c2e6e741969d34c4c92016a85c7cd0562303c4ccbe599467c24da118a5fe6fcd6 71c01 h = 0x85555841aaaec4ac Kato, et al. Expires September 19, 2018 [Page 9]

Internet-Draft Threat of Pairing March 2018 G2-Curve-ID: Fp581n8BLS48 p_b' = 0x1280f73ff3476f313824e31d47012a0056e84f8d122131bb3be6c0f1f3975444 a48ae43af6e082acd9cd30394f4736daf68367a5513170ee0a578fdf721a4a48ac 3ed c154e6565912b x' = 0x827d5c22fb2bdec5282624c4f4aaa2b1e5d7a9defaf47b5211cf 741719728a7f9f8cfca93f29cff364a7190b7e2b0d4585479bd6ae bf9fc44e56af2fc9e97c3f84e19da00fbc6ae34*u*v*w + b9b795 1c6061ee3f0197a498908aee660dea41b39d13852b6db908ba2c0b 7a449cef11f293b13ced0fd0caa5efcf3432aad1cbe4324c22d633 34b5b0e205c3354e41607e60750e057*v*w + c96c7797eb073860 3f1311e4ecda088f7b8f35dcef0977a3d1a58677bb037418181df6 3835d28997eb57b40b9c0b15dd7595a9f177612f097fc7960910fc e3370f2004d914a3c093a*u*w + 38b91c600b35913a3c598e4caa 9dd63007c675d0b1642b5675ff0e7c5805386699981f9e48199d5a c10b2ef492ae589274fad55fc1889aa80c65b5f746c9d4cbb739c3 a1c53f8cce5*w + be2218c25ceb6185c78d8012954d4bfe8f5985 ac62f3e5821b7b92a393f8be0cc218a95f63e1c776e6ec143b1b27 9b9468c31c5257c200ca52310b8cb4e80bc3f09a7033cbb7feafe *u*v + 1fccc70198f1334e1b2ea1853ad83bc73a8a6ca9ae237ca 7a6d6957ccbab5ab6860161c1dbd19242ffae766f0d2a6d55f028c bdfbb879d5fea8ef4cded6b3f0b46488156ca55a3e6a*v + 7c497 3ece2258512069b0e86abc07e8b22bb6d980e1623e9526f6da1230 7f4e1c3943a00abfedf16214a76affa62504f0c3c7630d979630ff d75556a01afa143f1669b36676b47c57*u + 5d615d9a7871e4a38 237fa45a2775debabbefc70344dbccb7de64db3a2ef156c46ff79b aad1a8c42281a63ca0612f400503004d80491f510317b797663221 54dec34fd0b4ace8bfab y' = 0x35e2524ff89029d393a5c07e84f981b5e068f1406be8e50c8754 9b6ef8eca9a9533a3f8e69c31e97e1ad0333ec719205417300d8c4 ab33f748e5ac66e84069c55d667ffcb732718b6*u*v*w + 896767 811be65ea25c2d05dfdd17af8a006f364fc0841b064155f14e4c81 9a6df98f425ae3a2864f22c1fab8c74b2618b5bb40fa639f53dccc 9e884017d9aa62b3d41faeafeb23986*v*w + 7d0d03745736b7a5 13d339d5ad537b90421ad66eb16722b589d82e2055ab7504fa8342 0e8c270841f6824f47c180d139e3aafc198caa72b679da59ed8226 cf3a594eedc58cf90bee4*u*w + d209d5a223a9c46916503fa5a8 8325a2554dc541b43dd93b5a959805f1129857ed85c77fa238cdce 8a1e2ca4e512b64f59f430135945d137b08857fdddfcf7a43f4783 1f982e50137*w + aec25a4621edc0688223fbbd478762b1c2cded 3360dcee23dd8b0e710e122d2742c89b224333fa40dced28177427 70ba10d67bda503ee5e578fb3d8b8a1e5337316213da92841589d *u*v + b36a201dd008523e421efb70367669ef2c2fc5030216d5b 119d3a480d370514475f7d5c99d0e90411515536ca3295e5e2f0c1 d35d51a652269cbc7c46fc3b8fde68332a526a2a8474*v + 284dc Kato, et al. Expires September 19, 2018 [Page 10]

Internet-Draft Threat of Pairing March 2018 75979e0ff144da6531815fcadc2b75a422ba325e6fba01d7296473 2fcbf3afb096b243b1f192c5c3d1892ab24e1dd212fa097d760e2e 588b423525ffc7b111471db936cd5665*u + eb53356c375b5dfa4 97216452f3024b918b4238059a577e6f3b39ebfc435faab0906235 afa27748d90f7336d8ae5163c1599abf77eea6d659045012ab12c0 ff323edd3fe4d2d7971 r' = r h' = 0x170e915cb0a6b7406b8d94042317f811d6bc3fc6e211ada42e 58ccfcb3ac076a7e4499d700a0c23dc4b0c078f92def8c87b7 fe63e1eea270db353a4ef4d38b5998ad8f0d042ea24c8f02be 1c0c83992fe5d7725227bb27123a949e0876c0a8ce0a67326d b0e955dcb791b867f31d6bfa62fbdd5f44a00504df04e186fa e033f1eb43c1b1a08b6e086eff03c8fee9ebdd1e191a8a4b04 66c90b389987de5637d5dd13dab33196bd2e5afa6cd19cf0fc 3fc7db7ece1f3fac742626b1b02fcee04043b2ea96492f6afa 51739597c54bb78aa6b0b99319fef9d09f768831018ee6564c 68d054c62f2e0b4549426fec24ab26957a669dba2a2b6945ce 40c9aec6afdeda16c79e15546cd7771fa544d5364236690ea0 6832679562a68731420ae52d0d35a90b8d10b688e31b6aee45 f45b7a5083c71732105852decc888f64839a4de33b99521f09 84a418d20fc7b0609530e454f0696fa2a8075ac01cc8ae3869 e8d0fe1f3788ffac4c01aa2720e431da333c83d9663bfb1fb7 a1a7b90528482c6be7892299030bb51a51dc7e91e915687441 6bf4c26f1ea7ec578058563960ef92bbbb8632d3a1b695f954 af10e9a78e40acffc13b06540aae9da5287fc4429485d44e62 89d8c0d6a3eb2ece35012452751839fb48bc14b515478e2ff4 12d930ac20307561f3a5c998e6bcbfebd97effc6433033a236 1bfcdc4fc74ad379a16c6dea49c209b1 G3-Field-ID: Fp581n48BLS48 p_b = 0x1280f73ff3476f313824e31d47012a0056e84f8d122131bb3be6c0f1f3975444 a48ae43af6e082acd9cd30394f4736daf68367a5513170ee0a578fdf721a4a48ac 3ed c154e6565912b r'' = 0x33325e51b8485cacb1cf7e79521a2c07ed618593bc2b823693827cddd501 412 8f299770734d9658ec3da72c829e2bfdfa5bc0dcac0f0dd385da0b70a1f1800f3 920706ac684379b30abec1422f3428ce3b9ea1d92e0995ded30bb3f127dd47570d 12 1a8200c4091f4c1a039e4dea3f3e733d60d4788b3a2db1954fa31287ef5b2f8 d31c9 b5f5107074dc917ffa3ebef388907b3e2400a0108fb4b983592be1718c4a 206f401d 2fd25126d86f05bd447da88d3240e4ebfd3c06ffacd5a6035b8599108 3e27f7ec56e 001b64a11949e1c61fca24a0634794818600eebf30801a216d1dc7 e2ac05b743e9bd 89e033b09757a9e3f9dd4bcdfd8c7ca6e2b5c39833111583a14 a800b430ae5ea8a3c 6ab3ad627523d1e7dedcf79a56483a81cf6a6deb7505ed45 Kato, et al. Expires September 19, 2018 [Page 11]

Internet-Draft Threat of Pairing March 2018 dc8a3d557237ef0f98ac 7ca9e577d5c7d429fdbdc87a0a0b056dd44b9c8ae1432 ac96dde432512ea1782c476 727732b7ace3a30d90fd4ad586edd8ee2b5b10e3cf f6cc31e9137f98d3debad7ca51 2af4f876915edb46c3d5d51c4c3c7e268727ab9 14ae89f05c7a7f9fa1df8ee053622 b60033bc7970f902d6a9ebc1b6ff316d5457 cdbd926cf183a6114ae6448650286067 ababbd5d747a5117b691e1e7138f2e4f8 d8025df47f695681f0555463005c211ac9c 52c56b7c96d4dbc30e86bcb3c7013d e1913fa60e2e58f1877fa6bd690f7f37858d69 9dcc083c27cd1837efb00d0bdda 265e73adca2760f99d911463fa51614aaf308a54f 46a15f08ad24c378210c60aa 64ff1772ec3d6d84fcaadd697aef4f87423b215d4ab9 aee8f260865b1 h'' = 0x170e915cb0a6b7406b8d94042317f811d6bc3fc6e211ada42e58ccfcb3ac 076 a7e4499d700a0c23dc4b0c078f92def8c87b7fe63e1eea270db353a4ef4d38b59 98ad8f0d042ea24c8f02be1c0c83992fe5d7725227bb27123a949e0876c0a8ce0a 67 326db0e955dcb791b867f31d6bfa62fbdd5f44a00504df04e186fae033f1eb4 3c1b1 a08b6e086eff03c8fee9ebdd1e191a8a4b0466c90b389987de5637d5dd13 dab33196 bd2e5afa6cd19cf0fc3fc7db7ece1f3fac742626b1b02fcee04043b2e a96492f6afa 51739597c54bb78aa6b0b99319fef9d09f768831018ee6564c68d0 54c62f2e0b4549 426fec24ab26957a669dba2a2b6945ce40c9aec6afdeda16c79 e15546cd7771fa544 d5364236690ea06832679562a68731420ae52d0d35a90b8d 10b688e31b6aee45f45b 7a5083c71732105852decc888f64839a4de33b99521f0 984a418d20fc7b0609530e4 54f0696fa2a8075ac01cc8ae3869e8d0fe1f3788ff ac4c01aa2720e431da333c83d9 663bfb1fb7a1a7b90528482c6be7892299030bb 51a51dc7e91e9156874416bf4c26f 1ea7ec578058563960ef92bbbb8632d3a1b6 95f954af10e9a78e40acffc13b06540a ae9da5287fc4429485d44e6289d8c0d6a 3eb2ece35012452751839fb48bc14b51547 8e2ff412d930ac20307561f3a5c998 e6bcbfebd97effc6433033a2361bfcdc4fc74a d379a16c6dea49c209b1 Pairing-Param-ID: Fp581BLS48 = { G1-Curve-ID: Fp581BLS48n G2-Curve-ID: Fp581BLS48n8 G3-Field-ID: Fp581BLS48n48 } 4. Optimal Ate Pairing This section specifies Optimal Ate Pairing e for c_0, ..., c_l and s_i = sum_{j=i}^l c_j * q^j with the following conditions 1. c_l is not 0 2. r is a divisor of s_0 3. r^2 is not a divisor of s_0 4. r does not divide s_0 * k * q^{k-1} - (q^k - 1)/r * sum_{i=0}^l i * c_i * q^{i - 1} Kato, et al. Expires September 19, 2018 [Page 12]

Internet-Draft Threat of Pairing March 2018 Section 4.1 shows a guide to decide these parameters c_0, ..., c_l. Optimal Ate Pairing is specified below and Miller Loop f which are its building blocks are introduced in Section 4.2. Straight Line Function l which is building blocks of Optimal Ate Pairing and Miller Loop are defined in Section 4.3. Section 4.3 only show the definitions because its descriptions are based on the form (of the PFC?). Practically, concrete algorithms need to be specified for a form of PFC. Input: o A point P in G_1 o A point Q in G_2 Output: o The value e(P, Q) in G_3 Method: 1. f = 1 2. ln = 1 3. for i = 0 to l (a) f = f * f_{c_i, Q}^{q^i}(P) end for 4. for i = 0 to l - 1 (a) ln = ln * l_{[s_i + 1]Q, [c_i * q^i]Q}(P) end for 5. return (f * ln)^{(q^k - 1)/r} 4.1. Guide for Decision on Parameters for Optimal Ate Pairing This subsection shows a guide for decision on parameters c_0, ..., c_l for Optimal Ate Pairing. According to [2], a way is to choose coefficients of short vector of the following lattice L with a minimal number of coefficients as parameters c_0, ..., c_l. L = (v_1, ..., v_phi(k)) where Kato, et al. Expires September 19, 2018 [Page 13]

Internet-Draft Threat of Pairing March 2018 o v_1 is column vector t(r, -q, -q^2, ..., -q^{phi(k) - 1}) o v_i is column vector whose i-th component is 1 and other components is 0 for i = 2, ..., phi(k) 4.2. Miller Loop In this subsection, we specify Miller Loop f which is building block of Optimal Ate Pairing. Input: o A point P in G_1 o A point Q in G_2 o An integer s Output: o f_{s, Q}(P) Method: 1. compute s_0, ..., s_L such that |s| = sum_{j=0}^L s_j * 2^j with s_j is in {0, 1} and s_L = 1 2. T = Q 3. f = 1 4. for j = L - 1 down to 0 (A) Doubling Step (a) ln = l_{T, T}(P) (b) T = 2 * T (B) f = f^2 * ln (C) if s_j = 1 (a) Addition Step (i) ln = l_{T, Q}(P) (ii) T = T + Q Kato, et al. Expires September 19, 2018 [Page 14]

Internet-Draft Threat of Pairing March 2018 (b) f = f' * ln end if end for 5. if s < 0, then f = f^{-1} 6. return f 4.3. Straight Line Function Straight Line Function l_{Q, Q'}(P) is calculated by a point P for linear equation defined as a line l though points Q, Q'. Note that Straight Line Function l_{Q, Q'}(P) is calculated by a point P for linear equation defined as a tangent line to an elliptic curve E at a point Q of E on condition that Q = Q'. The function is used for Optimal Ate Pairing in Section 4 and Miller Loop in Section 4.2 5. Algorithm Identifiers (TBD) 6. Security Considerations The pairing is a map from two elliptic curves G1 and G2 to a multiplicative subgroup of a finite field. Typically, G1 (respectively G2) is a cyclic subgroup in E(F_p) (respectively E'(F_{p^{k/d})) of prime order r, where k is the embedding degree and d is the degree of the twist. The group G3 is a set of r-th roots of unity in F_{p^k}^*. In this section, G_1', G_2' and G_3' denote E(F_p), E'(F_{p^{k/d}}) and F_{p^k}^* respectively. Pairing-based cryptographic primitives are often based on the hardness of the following problems. The elliptic curve discrete logarithm problem in G_1' and G_2' (ECDLP) The finite field discrete logarithm problem in G_3' (FFDLP) The elliptic curve computational Diffie-Hellman (CDH) problem in G_1' and G_2' The elliptic curve computational co-Diffie-Hellman problem in G_1' and G_2' Kato, et al. Expires September 19, 2018 [Page 15]

Internet-Draft Threat of Pairing March 2018 The elliptic curve decisional Diffie-Hellman (DDH) problem in G_1' The bilinear Diffie-Hellman (BDH) problem On the side of G1' and G2', the best known algorithm (for instance, Pollard-rho algorithm [10]) to solve ECDLP has a running time of O(sqrt(r)), which is exponential in r, where r is the order of the target group. Thus, for a security parameter l, one should set r so that log_2(r)>2*l. On the side of G3', one has more efficient algorithm based on Number Field Sieve methods (cite Gordon93 paper here, if you want). The complexity of the NFS (including its variants) is subexponential in the size of the finite field and is independent from the size of the subgroup order r. Recall the classical L-notation, L(q, a, c)= exp( (c+o(1))*log(q)^a * log(log(q))^(1-a) ). Before 2016, the best known algorithm for FFDLP has had a running time of L(p^k, 1/3, 1.92) and the parameters of currently used pairings are derived from the above value. At CRYPTO2016, however, Kim and Barbulescu proposed a new variant of the NFS method that drastically reduces the complexity of solving FFDLP from L(p^k, 1/3, 1.92) to L(p^k, 1/3, 1.53) in the best case[11]. For instance, Barbulescu estimates that the security of the pairing over BN curve, which was believed to have 128-bit security, drops to approximately 100-bit security. Hence, it has become necessary to revise the bit length of q=p^k so that the FFDLP over F_{p^k} is computationally infeasible against this new efficient NFS algorithm. G_3' to be larger than G_1' and G_2', because FFDLP can be computed more efficiently than ECDLP in most cases. Security level of schemes based on pairing depends most weak level for each problems. Thus implementers should necessary to ensure adequate security level for both of problems. 6.1. 128-bit Secure PFC Barreto and Naehrig showed how to construct pairing-friendly curves[13]. We have chosen 462-bit prime order curve and described in Section 3. 6.2. 256-bit Secure PFC Five 256-bit secure domain parameters have been proposed by Kiyomura[12]. We have chosen the BLS48 as 256-bit secure PFC and described in Section 3. Kato, et al. Expires September 19, 2018 [Page 16]

Internet-Draft Threat of Pairing March 2018 7. Acknowledgements (TBD) 8. Change log NOTE TO RFC EDITOR: Please remove this section in before final RFC publication. 9. References 9.1. Normative References [1] Bradner, S., "Key words for use in RFCs to Indicate Requirement Levels", RFC 2119, March 1997. [2] Vercauteren, F., "Optimal pairings", Proceedings IEEE Transactions on Information Theory 56(1): 455-461 (2010), 2010. 9.2. Informative References [3] Boyen, X. and l. Martin, "Identity-Based Cryptography Standard (IBCS) #1: Supersingular Curve Implementations of the BF and BB1 Cryptosystems", RFC 5091, December 2007. [4] Hitt, L., "ZSS Short Signature Scheme for Supersingular and BN Curves", draft-irtf-cfrg-zss-02 (work in progress), 2013. [5] Boneh, D. and M. Franklin, "Identity-based encryption from the Weil pairing", Proceedings Lecture notes in computer sciences; CRYPTO --CRYPTO2001, 2001. [6] Okamoto, T. and K. Takashima, "Fully Secure Functional Encryption with General Relations from the Decisional Linear Assumption", Proceedings Lecture notes in computer sciences; CRYPTO --CRYPTO2011, 2010. [7] "University of Tsukuba Elliptic Curve and Pairing Library", 2013, <http://www.cipher.risk.tsukuba.ac.jp/tepla/index_e.html>. [8] Aranha, D. and C. Gouv, "RELIC is an Efficient LIbrary for Cryptography", 2013, <https://code.google.com/p/relic-toolkit/>. Kato, et al. Expires September 19, 2018 [Page 17]

Internet-Draft Threat of Pairing March 2018 [9] Scott, M., "The MIRACL IoT Multi-Lingual Crypto Library", 2015, <https://github.com/CertiVox/MiotCL.git>. [10] Pollard, J., "Monte Carlo Methods for Index Computation ( mod p)", Proceedings Mathematics of Computation, Vol.32, 1978. [11] Kim, T. and R. Barbulescu, "Extended tower number field sieve: a new complexity for the medium prime case.", CRYPTO 2016 LNCS, vol. 9814, pp. 543.571, 2016. [12] Kiyomura, Y., Inoue, A., Kawahara, Y., Yasuda, M., Takagi, T., and T. Kobayashi, "Secure and Efficient Pairing at 256-Bit Security Level", ACNS 2017 LNCS, vol. 10355, pp. 59.79, 2017, 2017. [13] Barreto, Paulo. and Michael. Naehrig, "Pairing-Friendly Elliptic Curves of Prime Order", Selected Areas in Cryptography-SAC 2005. volume 3897 of Lecture Notes in Computer Science, pages 319-331, 2006. [14] "ISO/IEC 14888-3:2016", ISO/IEC Information technology -- Security techniques -- Digital signatures with appendix -- Part 3: Discrete logarithm based mechanisms, 2016. Kato, et al. Expires September 19, 2018 [Page 18]

Internet-Draft Threat of Pairing March 2018 Appendix A. Test Vectors of Optimal Ate Pairing In this section, we specify test vectors of Optimal Ate Pairing over BN-curve and BLS-curve which are specified by Section 3 in the following way. Parameter: Pairing-Param-ID is an identifier with which the pairing parameter set can be referenced. Input: P is a point of E in G_1 Q is a point of E' in G_2 Output: e(P, Q) is computation of pairing in G_3 (TBD) Authors' Addresses Akihiro Kato NTT TechnoCross Corporation EMail: kato.akihiro-at-po.ntt-tx.co.jp Tetsutaro Kobayashi NTT EMail: kobayashi.tetsutaro-at-lab.ntt.co.jp Yuto Kawahara NTT EMail: kawahara.yuto-at-lab.ntt.co.jp Taechan Kim NTT EMail: taechan.kim-at-lab.ntt.co.jp Kato, et al. Expires September 19, 2018 [Page 19]

Internet-Draft Threat of Pairing March 2018 Tsunekazu Saito NTT EMail: saito.tsunekazu-at-lab.ntt.co.jp Kato, et al. Expires September 19, 2018 [Page 20]