[Docs] [txt|pdf|xml|html] [Tracker] [Email] [Diff1] [Diff2] [Nits]

Versions: 00 01 02 03 04 05 06 07

Network Working Group                                            W. Koch
Internet-Draft                                             GnuPG Project
Intended status: Informational                              May 18, 2016
Expires: November 19, 2016


                        OpenPGP Web Key Service
                  draft-koch-openpgp-webkey-service-01

Abstract

   This specification describes a service to locate OpenPGP keys by mail
   address using a Web service and the HTTPS protocol.  It also provides
   a method for secure communication between the key owner and the mail
   provider to publish and revoke the public key.

Status of This Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at http://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on November 19, 2016.

Copyright Notice

   Copyright (c) 2016 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.




Koch                    Expires November 19, 2016               [Page 1]


Internet-Draft           OpenPGP Web Key Service                May 2016


Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   2
   2.  Notational Conventions  . . . . . . . . . . . . . . . . . . .   2
   3.  Web Key Directory . . . . . . . . . . . . . . . . . . . . . .   2
     3.1.  Key Discovery . . . . . . . . . . . . . . . . . . . . . .   3
   4.  Web Key Directory Update Protocol . . . . . . . . . . . . . .   4
     4.1.  The Submission Address  . . . . . . . . . . . . . . . . .   5
     4.2.  The Submission Mail . . . . . . . . . . . . . . . . . . .   6
     4.3.  The Confirmation Request  . . . . . . . . . . . . . . . .   6
     4.4.  The Confirmation Response . . . . . . . . . . . . . . . .   7
     4.5.  Policy Flags  . . . . . . . . . . . . . . . . . . . . . .   8
   5.  Security Considerations . . . . . . . . . . . . . . . . . . .   8
   6.  IANA Considerations . . . . . . . . . . . . . . . . . . . . .   9
     6.1.  Well-Known URI  . . . . . . . . . . . . . . . . . . . . .   9
   7.  Acknowledgments . . . . . . . . . . . . . . . . . . . . . . .   9
   8.  Normative References  . . . . . . . . . . . . . . . . . . . .   9
   Appendix A.  Test Vectors . . . . . . . . . . . . . . . . . . . .  10
     A.1.  Sample key  . . . . . . . . . . . . . . . . . . . . . . .  10
     A.2.  Software Notes  . . . . . . . . . . . . . . . . . . . . .  10
   Appendix B.  Changes since -00  . . . . . . . . . . . . . . . . .  10
     B.1.  TODO  . . . . . . . . . . . . . . . . . . . . . . . . . .  10
   Author's Address  . . . . . . . . . . . . . . . . . . . . . . . .  10

1.  Introduction

   This memo describes a method to associate OpenPGP keys with a mail
   address and how to look them up using a web service with a well-known
   URI.  In addition a mail based protocol is given to allow a client to
   setup such an association and to maintain it.

2.  Notational Conventions

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in [RFC2119].

3.  Web Key Directory

   A major use case for OpenPGP is the encryption of mail.  A common
   difficulty of sending encrypted mails to a new communication partner
   is to find the appropriate public key of the recipient.  Unless an
   off-channel key exchange has been done, there are no easy ways to
   discover the required key.  The common practice is to search the
   network of public key servers for a key matching the recipient's mail
   address.  This practise bears the problem that the keyservers are not
   able to give a positive confirmation that a key actually belongs to
   the mail addresses given in the key.  Further, there are often



Koch                    Expires November 19, 2016               [Page 2]


Internet-Draft           OpenPGP Web Key Service                May 2016


   several keys matching a mail address and thus one needs to pick a key
   on good luck.  This is clearly not a secure way to setup an end-to-
   end encryption.  Even if the need for a trusted key for an initial
   mail message is relinquished, a non-authenticated key may be a wrong
   one and the actual recipient would receive a mail which she can't
   decrypt, due to the use of a wrong key.

   Methods to overcome this problem are

   o  sending an initial unencrypted message with the public key
      attached,

   o  using the OpenPGP DANE protocol to lookup the recipients key via
      the DNS.

   The first method has the obvious problems of not even trying to
   encrypt the initial mail, an extra mail round-trip, and problems with
   unattended key discovery.

   The latter method works fine but requires that mail providers need to
   set up a separate DNS resolver to provide the key.  The
   administration of a DNS zone is often not in the hands of small mail
   installations.  Thus an update of the DNS resource records needs to
   be delegated to the ISP running the DNS service.  Further, DNS
   lookups are not encrypted and missing all confidentially.  Even if
   the participating MUAs are using STARTTLS to encrypt the mail
   exchange, a DNS lookup for the key unnecessarily identifies the
   local-part of the recipients mail address to any passive
   eavesdroppers.

   This memo specified a new method for key discovery using an encrypted
   https connection.

3.1.  Key Discovery

   Although URIs are able to encode all kind of characters,
   straightforward implementations of a key directory may want to store
   the "local-part" of a mail address directly in the file system.  This
   forbids the use of certain characters in the "local-part".  To allow
   for such an implementation method the URI uses an encoded form of the
   "local-part" which can be directly mapped to a file name.

   OpenPGP defines its User IDs, and thus the mail address, as UTF-8
   strings.  To help with the common pattern of using capitalized names
   (e.g.  "Joe.Doe@example.org") for mail addresses, and under the
   premise that almost all MTAs treat the "local-part" case-insensitive
   and that the "domain-part" is required to be compared case-




Koch                    Expires November 19, 2016               [Page 3]


Internet-Draft           OpenPGP Web Key Service                May 2016


   insensitive anyway, all upper-case ASCII characters in a User ID are
   mapped to lowercase.  Non-ASCII characters are not changed.

   The so mapped "local-part" is hashed using the SHA-1 algorithm.  The
   resulting 160 bit digest is encoded using the Z-Base-32 method as
   described in [RFC6189], section 5.1.6.  The resulting string has a
   fixed length of 32 octets.  To form the URI, the scheme "https://" is
   concatenated with the mapped "domain-part", the fixed string "./well-
   known/openpgpkey/hu/", and the above constructed 32 octet string.

   For example the URI to lookup the key for Joe.Doe@Example.ORG is:

     https://example.org/.well-known/openpgpkey/
     hu/iy9q119eutrkn8s1mk4r39qejnbu3n5q

   (line has been wrapped for rendering purposes)

   The HTTP GET method MUST return the binary representation of the
   OpenPGP key for the given mail address.  The key needs to carry a
   User ID packet ([RFC4880]) with that mail address.  Note that the key
   may be revoked or expired - it is up to the client to handle such
   conditions.  The server MUST also accept a HEAD method so that a
   client may only check for the existence of a key.

   The server SHOULD return "application/octet-string" as the content-
   type for the data but clients MAY also accept any other appropriate
   content-type.  The server MUST NOT return an ASCII armored version of
   the key.

4.  Web Key Directory Update Protocol

   To put keys into the key directory a protocol to automate the task is
   desirable.  The protocol defined here is entirely based on mail and
   the assumption that a mail provider can securely deliver mail to the
   INBOX of a user (e.g. an IMAP folder).  Note that the same protocol
   may also be used for submitting keys for use with OpenPGP DANE.

   We assume that the user already created a key for her mail account
   alice@example.org.  To install the key at her provider's Web Key
   Directory, she performs the following steps:

   1.  She retrieves a file which contains one line with the mail
       address used to submit the key to the mail provider.  See below
       for the syntax of that file.  For a mail address at the domain
       "example.org" the URI of the file is

       https://example.org/.well-known/openpgpkey/submission-address




Koch                    Expires November 19, 2016               [Page 4]


Internet-Draft           OpenPGP Web Key Service                May 2016


   2.  She sends her key using SMTP (or any other transport mechanism)
       to the provider using the submission address and key format as
       specified by PGP/MIME.

   3.  The provider checks that the received key has a User ID which
       matches an account name of the provider.

   4.  The provider sends an encrypted message containing a nonce and
       the fingerprint of the key to the mail account of the user.  Note
       that a similar scheme is used by the well known caff(1) tool to
       help with key signing parties.

   5.  A legitimate user will be able to decrypt the message because she
       created the key and is in charge of the private key.  This step
       verifies that the submitted key has actually been created by the
       owner of the account.

   6.  The user sends the decrypted nonce back to the submission address
       as a confirmation that the private key is owned by her and that
       the provider may now publish the key.  Also technically not
       required, it is suggested that the mail to the provider is
       encrypted.  The public key for this is retrieved using the key
       lookup protocol described above.

   7.  The provider receives the nonce, matches it with its database of
       pending confirmations and then publishes the key.  Finally the
       provider sends a mail back to the user to notify her of the the
       publication of her key.

   The message data structures used for the above protocol are specified
   in detail below.  In the following sections the string "WELLKNOWN"
   denotes the first part of an URI specific for a domain.  In the
   examples the domain "example.org" is assumed, thus

     WELLKNOWN := https://example.org/.well-known/openpgpkey

   The term "target key" denotes the to be published key, the term
   "submission key" the key associated with the submission-address of
   the mail provider.

4.1.  The Submission Address

   The address of the submission file is

     WELLKNOWN/submission-address

   The file consists of exactly one line, terminated by a LF, or the
   sequence of CR and LF, with the full mail address to be used for



Koch                    Expires November 19, 2016               [Page 5]


Internet-Draft           OpenPGP Web Key Service                May 2016


   submission of a key to the mail provider.  For example the content of
   the file may be

     key-submission-example.org@directory.example.org

4.2.  The Submission Mail

   The mail used to submit a key to the mail provider MUST comply to the
   PGP/MIME specification ([RFC3156], section 7), which states that the
   Content-Type must be "application/pgp-keys", there are no required or
   optional parameters, and the body part contains the ASCII-armored
   transferable Public Key Packets as defined in [RFC4880], section
   11.1.

   If the mail provider has published an encryption key for the
   submission-address in the Web Key Directory, the key to be published
   MUST be submitted using a PGP/MIME encrypted message ([RFC3156],
   section 4).  The message MUST NOT be signed (because the authenticity
   of the signing key has not yet been confirmed).  After decryption of
   the message at the mail provider a single "application/pgp-keys"
   part, as specified above, is expected.

4.3.  The Confirmation Request

   The mail provider sends a confirmation mail in response to a received
   key publication request.  The message SHOULD be sent from the
   submission-address of the mail provider to the mail address extracted
   from the target key.  The message needs to be encrypted to the target
   key and MAY be signed by the submission key.  PGP/MIME MUST be used
   for encryption and signing; the Combined method ([RFC3156], section
   6.2) MUST be used if the message is to be signed.

   The Content-type used for the plaintext part MUST be "application/
   vnd.gnupg.wkd".  The body consists of name-value pairs with one name-
   value pair per LF or CR+LF terminated line.  Empty lines are allowed
   and will be ignored by the receiver.  A colon is used to terminate a
   name.

   In a confirmation request the following names MUST be send in the
   specified order:

   o  *"type":* The value must be "confirmation-request".

   o  *"sender":* This is the mailbox the user is expected to sent the
      confirmation response to.  The value must match the mailbox part
      of the "From:" address of this request.  Exactly one address MUST
      be given.




Koch                    Expires November 19, 2016               [Page 6]


Internet-Draft           OpenPGP Web Key Service                May 2016


   o  *"address":* The value is the addr-spec part of the target key's
      mail address.  The value SHOULD match the addr-spec part of the
      recipient's address.  The value MUST be UTF-8 encoded as required
      for an OpenPGP User ID.

   o  *"fingerprint":* The value is the fingerprint of the target key.
      The fingerprint is given in uppercase hex encoding without any
      interleaving spaces.

   o  *"nonce":* The value is a string with a minimum length of 16
      octets and a maximum length of 64 octets.  The string must
      entirely be made up of random ASCII letters or digits.  This nonce
      will be sent back to the mail provider as proof that the recipient
      is the legitimate owner of the target-key.

   The receiver of the message decrypts the message, checks that the
   "fingerprint" matches the target key, checks that the "address"
   matches a User ID of the target key, and checks the other constrains
   of the request format.  If any constraint is not asserted, or the
   fingerprint or User ID do not match the target key, or there is no
   pending publication requests (i.e. a mail recently sent o the
   submission address), the user MAY be notified about this fake
   confirmation attempt.

   In other cases the confirmation request is legitimate and the MUA
   shall silently send a response as described in the next section.

4.4.  The Confirmation Response

   A response to a confirmation request MUST only be send in the
   positive case; there is no negative confirmation response.  A mail
   service provider is expected to cancel a pending key submission after
   a suitable time without a confirmation.  The mail service provider
   SHOULD NOT retry the sending of a confirmation request after the
   first request has been send successfully.

   The user MUST send the confirmation response from her target mail
   address to the "from" address of the confirmation request.  The
   message MUST be signed and SHOULD be encrypted.  The PGP/MIME
   Combined format MUST be used for encryption and signing ([RFC3156],
   section 6.2).  The encryption key can be taken from the Web Key
   Directory.

   The Content-type used for the plaintext message MUST also be
   "application/vnd.gnupg.wkd".  The format is the same as described
   above for the Confirmation Request.  The body must contain three
   name-value pairs in this order:




Koch                    Expires November 19, 2016               [Page 7]


Internet-Draft           OpenPGP Web Key Service                May 2016


   o  *"type":* The value must be "confirmation-response".

   o  *"sender":* The value must match the mailbox part of the "From:"
      address of this response.  Exactly one address MUST be given.

   o  *"nonce":* The value is the value of the "nonce" parameter from
      the confirmation request.

4.5.  Policy Flags

   For key generation and submission it is sometimes useful to tell the
   client about certain properties of the mail provider in advance.
   This can be done with a file at the URL

     WELLKNOWN/policy

   The file contains keywords, one per line with each line terminated by
   a LF or the sequence of CR and LF.  Empty lines and lines starting
   with a '#' character are considered comment lines.  A keyword is made
   up of lowercase letters, digits, hyphens, or dots.  An underscore is
   allowed as a name space delimiters; see below.  The first character
   must be a letter.  Clients MUST use case-insensitive matching.

   Currently defined keywords are:

   o  *"mailbox-only":* The mail server provider does only accept keys
      with only a mailbox in the User ID.  In particular User IDs with a
      real name in addition to the mailbox will be rejected as invalid.

   o  *"dane-only":* The mail server provider does not run a Web Key
      Directory but only an OpenPGP DANE service.  The Web Key Directory
      Update protocol is used to update the keys for the DANE service.

   More keywords will be defined in updates to this I-D.  There is no
   registry yet except for this document.  For experimental use of new
   features or for provider specific settings, keywords MUST be prefixed
   with a domain name and an underscore.

5.  Security Considerations

   The use of SHA-1 for the mapping of the "local-part" to a fixed
   string is not a security feature but merely used to map the local-
   part to a fixed-sized string made from a well defined set of
   characters.  It is not intended to conceal information about a mail
   address.






Koch                    Expires November 19, 2016               [Page 8]


Internet-Draft           OpenPGP Web Key Service                May 2016


   The domain name part of the mail address is not part of the hash to
   avoid problems with internationalized domain names.  Instead a
   separate web service is required for each domain name.

6.  IANA Considerations

6.1.  Well-Known URI

   IANA is requested to assign a well-known URI in the "Well-Known URIs"
   registry as defined by [RFC5785]:

   URI suffix: openpgpkey

   Change controller: IETF

   Specification document: This

7.  Acknowledgments

   The author would like to acknowledge the help of the individuals who
   kindly voiced their opinions on the GnuPG mailing lists, in
   particular, the help of Bernhard Reiter and Guilhem Moulin.

8.  Normative References

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119, March 1997.

   [RFC3156]  Elkins, M., Del Torto, D., Levien, R., and T. Roessler,
              "MIME Security with OpenPGP", RFC 3156, August 2001.

   [RFC4880]  Callas, J., Donnerhacke, L., Finney, H., Shaw, D., and R.
              Thayer, "OpenPGP Message Format", RFC 4880, November 2007.

   [RFC5785]  Nottingham, M. and E. Hammer-Lahav, "Defining Well-Known
              Uniform Resource Identifiers (URIs)", RFC 5785, DOI
              10.17487/RFC5785, April 2010,
              <http://www.rfc-editor.org/info/rfc5785>.

   [RFC6189]  Zimmermann, P., Johnston, A., Ed., and J. Callas, "ZRTP:
              Media Path Key Agreement for Unicast Secure RTP", RFC
              6189, DOI 10.17487/RFC6189, April 2011,
              <http://www.rfc-editor.org/info/rfc6189>.








Koch                    Expires November 19, 2016               [Page 9]


Internet-Draft           OpenPGP Web Key Service                May 2016


Appendix A.  Test Vectors

   For help implementing this specification a non-normative example is
   given:

A.1.  Sample key

   TODO

A.2.  Software Notes

   GnuPG supports the key discovery described in version -00 of this
   document since version 2.1.12, 2.1.13 and the gurrent git version
   will be adjusted to the changes specs dfescribed in -01.  To use it,
   the new method "wkd" needs to be used with the "--auto-key-locate"
   option.

Appendix B.  Changes since -00

   o  Dropped the second occurrence of the domain name from the URL.

   o  Changed field names in the request and response format.

   o  Removed useless checks.

   o  Added a new policy flag.

B.1.  TODO

   o  What about authenticated submission?

   o  Describe how to handle a key with several User IDs.

Author's Address

   Werner Koch
   GnuPG Project

   Email: wk@gnupg.org
   URI:   https://gnupg.org











Koch                    Expires November 19, 2016              [Page 10]


Html markup produced by rfcmarkup 1.129c, available from https://tools.ietf.org/tools/rfcmarkup/