[Docs] [txt|pdf|xml|html] [Tracker] [Email] [Nits]

Versions: 00 draft-iab-doi

Network Working Group                                          J. Levine
Internet-Draft                                      Taughannock Networks
Intended status: Informational                          January 10, 2014
Expires: July 14, 2014


              Assigning Digital Object Identifiers to RFCs
                          draft-levine-doi-00

Abstract

   The Digital Object Identifier (DOI) is a widely used system that
   assigns unique identifiers to digital documents that can be queried
   and managed in a consistent fashion.  We propose a method to assign
   DOIs to past and future RFCs.

Status of This Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at http://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on July 14, 2014.

Copyright Notice

   Copyright (c) 2014 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.




Levine                    Expires July 14, 2014                 [Page 1]


Internet-Draft                DOIs for RFCs                 January 2014


Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   2
   2.  Structure and resolution of DOIs  . . . . . . . . . . . . . .   2
   3.  DOIs for RFCs . . . . . . . . . . . . . . . . . . . . . . . .   3
   4.  The process of assigning DOIs . . . . . . . . . . . . . . . .   3
     4.1.  Getting a DOI prefix  . . . . . . . . . . . . . . . . . .   4
     4.2.  Retroactively assigning DOIs  . . . . . . . . . . . . . .   4
     4.3.  Assigning DOIs to new RFCs  . . . . . . . . . . . . . . .   4
   5.  Informative References  . . . . . . . . . . . . . . . . . . .   4
   Author's Address  . . . . . . . . . . . . . . . . . . . . . . . .   5

1.  Introduction

   The Digital Object Identifier (DOI) is a widely used system that
   assigns unique identifiers to digital documents that can be queried
   and managed in a consistent fashion.  The structure of DOIs is
   defined by ISO 26324:2012 [ISO-DOI] and is implemented by a group of
   registration agencies coordinated by the International DOI
   Foundation.

   Each DOI is accompanied by metadata about the object, such as one or
   more URIs where the object can be found.  The DOI system also
   provides many features not relevant to RFCs, such as the ability to
   update the metadata after the DOI is assigned, and for organizations
   to maintain local caches of metadata, e.g., a university or corporate
   library that tracks its copies of purchased documents so subsequent
   users don't buy them again.

   Nonetheless, the wide use of DOIs suggests that even though RFCs can
   be downloaded directly from the IETF for free, organizations that use
   DOIs can have trouble locating non-DOI documents.  DOIs with metadata
   that points to the existing free online RFCs would make RFCs easier
   to find.  Some scholarly publishers accept DOIs as references in
   published documents, so DOIs would make RFCs easier to cite.

2.  Structure and resolution of DOIs

   DOIs are an application of the handle system defined by RFCs
   [RFC3650], [RFC3651], and [RFC3652].  A DOI for an RFC might be

       10.123456/rfc1234

   The first part of a DOI is the number 10, which means a DOI within
   the handle system, a dot, and a unique number assigned to a
   publisher, in this example 123456.  This part is the DOI prefix.
   Following that is a slash and a text string assigned by the
   publisher, called the DOI suffix.  A reasonable way to assign DOIs



Levine                    Expires July 14, 2014                 [Page 2]


Internet-Draft                DOIs for RFCs                 January 2014


   would be to use the familiar series names and numbers, e.g., rfc1234,
   bcp100, or std11.  (DOIs are case-insensitive.)

   Although the handle system has its own protocol described in
   [RFC3652], the usual way to look up a DOI is to use web lookup.  CNRI
   provides a Firefox plugin that adds a "doi:" URI scheme.  Lacking
   that, one can use a public http proxy, usually http://dx.doi.org, so
   the sample DOI above could be looked up at:

       http://dx.doi.org/10.123456/rfc1234

   Whenever a publisher assigns a DOI, it provides the metadata for the
   object (henceforth called a document, since that what they are in
   this context) to its registration agency which then makes it
   available to clients that look up DOIs.  Publishers have considerable
   flexibility as to what actually resides at the URI(s) that a DOI
   refers to.  Sometimes it's the document itself, while for commercial
   publishers it's typically a page with the abstract and bibliographic
   information, and some way to buy the actual document.  Since some
   RFCs are in multiple formats (e.g., Postscript and text) an
   appropriate URI would be that of the RFC Editor's info page that has
   the RFC's abstract and links to the document in various formats.
   Hence the URI above would be set to redirect to

       http://www.rfc-editor.org/info/rfc1234

   More information on the structure and use of DOIs is in the DOI
   Handbook [DOI-HB].

3.  DOIs for RFCs

   Once the RFC series has DOIs assigned, it would be a good idea to
   include the DOI in the boilerplate for each RFC, perhaps next to the
   ISSN.  Online databases and indexes that include RFCs would be
   updated to include the DOI, e.g. the ACM Digital Library.  (A
   practical advantage of this is that the DOI would link directly to
   the IETF, rather than perhaps to a copy of an RFC behind a paywall.)

   Since RFCs are immutable, existing RFCs still wouldn't mention their
   own DOIs within the RFC itself, but putting the DOIs into indexes
   would still provide value.

4.  The process of assigning DOIs

   There are three phases to assigning DOIs to RFCs, getting a DOI
   prefix, retroactively assigning DOIs to existing documents, and
   updating the publication process to assign DOIs as new RFCs are
   published,



Levine                    Expires July 14, 2014                 [Page 3]


Internet-Draft                DOIs for RFCs                 January 2014


4.1.  Getting a DOI prefix

   There are ten registration agencies [DOI-RA] that assign DOI
   prefixes.  Most of them serve specialized audiences or limited
   geographic areas, but there are a few that handle scholarly and
   technical materials.  All registration agencies charge for DOIs to
   defray the cost of maintaining the metadata databases.  The prices
   are fairly low, on the order of $660/year for membership, and deposit
   fees of 15 cents per document for a bulk upload of the backfile, and
   $1/per document as they are published.

4.2.  Retroactively assigning DOIs

   Other than of paying the submission fees, assigning DOIs to all of
   the existing RFCs is primarily a software problem.  We'd need tools
   to extract or create the metadata for all of the RFCs and submit it
   to the registration agency an online API.  Where we are aware of
   indexes and databases that include RFCs, we would try to get them to
   include the DOI.

4.3.  Assigning DOIs to new RFCs

   As new RFCs are published, the publication process will add steps to
   collect and submit the metadata to the registration agency.

5.  Informative References

   [DOI-HB]   International DOI Foundation, "DOI Handbook", April 2012,
              <http://www.doi.org/hb.html>.

   [DOI-RA]   International DOI Foundation, "DOI Registration Agencies",
              July 2013,
              <http://www.doi.org/registration_agencies.html>.

   [ISO-DOI]  International Organization for Standardization (ISO), "ISO
              26324:2012 Information and documentation -- Digital object
              identifier system", 2012,
              <http://www.iso.org/iso/catalogue_detail?csnumber=43506>.

   [RFC3044]  Rozenfeld, S., "Using The ISSN (International Serial
              Standard Number) as URN (Uniform Resource Names) within an
              ISSN-URN Namespace", RFC 3044, January 2001.

   [RFC3650]  Sun, S., Lannom, L., and B. Boesch, "Handle System
              Overview", RFC 3650, November 2003.






Levine                    Expires July 14, 2014                 [Page 4]


Internet-Draft                DOIs for RFCs                 January 2014


   [RFC3651]  Sun, S., Reilly, S., and L. Lannom, "Handle System
              Namespace and Service Definition", RFC 3651, November
              2003.

   [RFC3652]  Sun, S., Reilly, S., Lannom, L., and J. Petrone, "Handle
              System Protocol (ver 2.1) Specification", RFC 3652,
              November 2003.

Author's Address

   John Levine
   Taughannock Networks
   PO Box 727
   Trumansburg, NY  14886

   Phone: +1 831 480 2300
   Email: standards@taugh.com
   URI:   http://jl.ly

































Levine                    Expires July 14, 2014                 [Page 5]


Html markup produced by rfcmarkup 1.129c, available from https://tools.ietf.org/tools/rfcmarkup/