[Docs] [txt|pdf] [Tracker] [Email] [Diff1] [Diff2] [Nits]

Versions: 00 01 02 draft-ietf-geopriv-dhcp-lbyr-uri-option

Geopriv WG                                                   James Polk
Internet-Draft                                            Cisco Systems
Expires: May 18th, 2008                             November 18th, 2007
Intended status:  Standards Track (PS)


        Dynamic Host Configuration Protocol (DHCP) Option for a
     Location-by-Reference (LbyR) Uniform Resource Identifier (URI)
               draft-polk-geopriv-dhcp-lbyr-uri-option-02

Status of this Memo

   By submitting this Internet-Draft, each author represents that any
   applicable patent or other IPR claims of which he or she is aware
   have been or will be disclosed, and any of which he or she becomes
   aware will be disclosed, in accordance with Section 6 of BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF), its areas, and its working groups.  Note that
   other groups may also distribute working documents as Internet-
   Drafts.

   Internet-Drafts are draft documents valid for a maximum of six
   months and may be updated, replaced, or obsoleted by other documents
   at any time.  It is inappropriate to use Internet-Drafts as
   reference material or to cite them other than as "work in progress."

   The list of current Internet-Drafts can be accessed at
   http://www.ietf.org/ietf/1id-abstracts.txt.

   The list of Internet-Draft Shadow Directories can be accessed at
   http://www.ietf.org/shadow.html.

   This Internet-Draft will expire on May 18th, 2008.

Copyright Notice

   Copyright (C) The IETF Trust (2007).

Abstract

   This document creates a Dynamic Host Configuration Protocol (DHCP)
   Option for the Location-by-Reference (LbyR) Uniform Resource
   Identifier (URI) of an endpoint.  For example, an endpoint can be a
   Session Initiation Protocol (SIP) User Agent (i.e., a phone).  This
   LbyR URI can be included in a UA's messages to inform other nodes of
   that entity's geographic location, once the URI is dereferenced by a
   Location Recipient.






Polk                      Expires May 18th 2008                [Page 1]

Internet-Draft        Geopriv DHCP LbyR URI Option             Nov 2007


Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .  2
       1.1. Conventions Used in this Document  . . . . . . . . . . .  4
   2.  DHC Location URI Elements . . . . . . . . . . . . . . . . . .  4
       2.1.  Elements of the Location Configuration Information  . .  4
   3.  DHC Option Operation  . . . . . . . . . . . . . . . . . . . .  5
       3.1 Architectural Assumptions . . . . . . . . . . . . . . . .  6
       3.2 Harmful URIs and URLs . . . . . . . . . . . . . . . . . .  6
   4.  Acknowledgements  . . . . . . . . . . . . . . . . . . . . . .  6
   5.  IANA Considerations . . . . . . . . . . . . . . . . . . . . .  7
   6.  Security Considerations . . . . . . . . . . . . . . . . . . .  7
   7.  References  . . . . . . . . . . . . . . . . . . . . . . . . .  7
       7.1. Normative References . . . . . . . . . . . . . . . . . .  7
       7.2. Informative References . . . . . . . . . . . . . . . . .  8
   Authors' Addresses  . . . . . . . . . . . . . . . . . . . . . . .  8
   Intellectual Property and Copyright Statements  . . . . . . . . .  8


1.  Introduction

   This document creates a Dynamic Host Configuration Protocol (DHCP)
   Option for delivery of a client's Location-by-Reference (LbyR)
   Uniform Resource Identifier (URI).  For example, a client can be a
   Session Initiation Protocol (SIP) User Agent (UA) [RFC3261] (i.e., a
   Phone).  This LbyR URI can be included in one UA's messages to
   informing those remote devices of that UA's geographic location,
   once the URI is dereferenced by a Location Recipient [ID-SIP-LOC]. A
   Location Recipient is a device that has received location from
   another device.  If this location is delivered by a URI, the URI has
   to be dereferenced by the Location Recipient to learn the remote
   device's geographic location.  Dereferencing can be done in SIP by
   use of the SUBSCRIBE/NOTIFY Methods [RFC3265] to either a sip:,
   sips: or pres: scheme URI.

   Endpoints will require their geographic location for a growing
   number of services.  A popular use-case currently is for emergency
   services, in which SIP requires its location to be placed in a SIP
   INVITE request message towards a public safety answering point
   (PSAP), i.e., an emergency response center.  The reason for this is
   twofold:

   o An emergency services SIP request must be routed/retargeted to the
     appropriate PSAP that is local to where the calling device is.

   o The first responders require the UA's location in order to know
     where to be dispatched to render aid to the caller.

   There are other use-cases, such as calling the appropriate Pizza Hut
   without having to look up which store is closest.  A UA knowing its
   location can call a main/national/international Pizza Hut number or


Polk                      Expires May 18th 2008                [Page 2]

Internet-Draft        Geopriv DHCP LbyR URI Option             Nov 2007

   address and let the UA's location tell Pizza Hut enough information
   to have them route/retarget the SIP request to the appropriate store
   within the Pizza Hut organization to deliver the pizza to the
   caller's location.

   A problem exists within existing RFCs that provide location to the
   UA ([RFC3825] and [RFC4776]) that location has to be updated every
   time a UA moves.  Not all UAs will move frequently, but some will.
   Refreshing location every time a UA moves does not scale in certain
   networks/environments, such as enterprise networks or service
   provider networks with mobile endpoints.  An 802.11 based access
   network is an example of this.  This also might not scale in mobile
   residential networks in which the UA is hopping between more than
   one network attachment point, perhaps as a person walks with their
   UA down a neighborhood street or apartment complex.

   If the UA were provided a URI reference to retain and hand out when
   it wants to convey its location, one that would not change as the
   UA's location changes, scaling issues would be significantly
   reduced.  This delivery of an indirect location has the added
   benefit of not using up valuable or limited bandwidth to the UA
   with the constant updates.  It also relieves the UA from having to
   determine when it has moved far enough to consider asking for a
   refresh of its location.  Once the UA has a LbyR URI, a service
   provider would merely update the location at the URI the UA already
   has.  This document does not define how this update is done, as it
   will likely not be with DHCP.

   In enterprise networks, a URI can be assigned to individual Ethernet
   ports because each is assigned a unique circuit-ID that's used by
   the RAIO Option defined in RFC 3046 [RFC3046]; meaning whatever is
   attached to a particular port will get the same URI because that
   device is at a known location (where the cable attached to that port
   is terminated).  This scenario applies to 802.11 Access Points (AP),
   in which the AP's location is what's fixed and known.  The same URI
   can be given to all devices attached to the same AP.  RFC 4119
   [RFC4119] has the <method> element, which indicates how the endpoint
   learned its location.  In this scenario, the <method> element
   indicates in the PIDF-LO the UA learned its location through DHCP,
   thus informing the call taker the UA is within a certain radius of
   the AP.

   Just as with residential router/gateways, which can be wired or
   wireless, in which all devices understanding this Option will be
   giving the location of the residence. The Option also benefits from
   the URI not needing identity information to still be useful.

   APs that triangulate can also have a individual URI downloaded to
   each endpoint with this Option, for the endpoint to hand out
   whenever it is configured to.  The <method> element would give a
   different indication in such a case, one that states the location is
   a triangulation of the UA's specific location, and not that of the


Polk                      Expires May 18th 2008                [Page 3]

Internet-Draft        Geopriv DHCP LbyR URI Option             Nov 2007

   AP's.

   This Option can be useful in WiMAX connected endpoints or IP
   cellular endpoints.  The Location URI Option can be configured as a
   client if it is a router, such as a residential home gateway, with
   the ability to communicate to downstream endpoints as a server.

   This document IANA registers the new DHC Option for a Location URI.


1.1 Conventions Used in this Document

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in [RFC2119].


2.  DHC Location URI Elements

   DHCP is a binary Protocol; URIs are alphanumeric (text) based.
   There is one byte per URI character.

   [Editor's question: should UTF-8 vs. UTF-16 be accounted for?]

   The Location URI Option format is as follows:

     0                   1                   2                   3
     0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
    |   Code XXX    | Option Length |          Valid-For            |
    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
    |                          Location URI                         |
    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
    /                            ....                               \
    \                            ....                               /
    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
    |                     Location URI (cont'd)                     +
    +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+


2.1.  Elements of the Location Configuration Information

   Code XXX:      The code for this DHCP option.

   Option Length: The length of this option variable.

   Valid-For:     The time, in seconds, this URI is to be considered
                  valid.

   Location URI:  The Location-by-Reference URI for the client

   The <Valid-For> field indicates how long, in seconds, the client is


Polk                      Expires May 18th 2008                [Page 4]

Internet-Draft        Geopriv DHCP LbyR URI Option             Nov 2007

   to consider this location URI valid before performing a refresh of
   this Option, with a new <Valid-For> answer.  A refresh MAY be done
   merely at the normal DHCP refresh rate, or necessitated by this
   timer, perhaps just requesting this Option be refreshed.


3. DHC Option Operation

   The [RFC3046] RAIO MUST be utilized to provide the appropriate
   indication to the DHCP Server where this DISCOVER or REQUEST message
   came from, in order to supply the correct response.

   Caution SHOULD always be used involving the creation of large
   Options, meaning that this Option MAY need to be in its own INFORM,
   OPTION or ACK message.

   It is RECOMMENDED to avoid building URIs, with any parameters,
   larger than what a single DHCP response can be.  However, if a
   message is larger than 255 bytes, concatenation is allowed, per RFC
   3396 [RFC3396].

   Per [RFC2131], subsequent LbyR URI Options, which are
   non-concatenated, overwrite the previous value.

   LbyR URIs MUST NOT reveal identity information of the user of the
   device, since DHCP is a cleartext delivery protocol. For example,
   LbyR URIs such as

      sips:34LKJH534663J54@example.com

   should be done, providing no identity information, rather than a
   LbyR URI such as this

      sips:aliceisinatlanta@example.com

   This Option is between a DHCP client and a DHCP server.  It may be
   solicited (requested) by the client, or it may be pushed by the
   server without a request for it.  Options not understood are
   ignored.  The server MAY or MAY NOT have the location of a client
   within the server.  If a server does not have a client's location, a
   topology of communication to a Location Information Server (LIS)
   [ID-LBYR-REQ] would be necessary.

   The coordination between the logical entity of a DHCP server and the
   logical entity of a LIS as to which circuit-ID gets which LbyR URI
   is not done via DHCP, therefore it is not defined here.  Any
   dereferencing of a client's LbyR URI would not involve DHCP either,
   but more likely an application layer protocol such as SIP, through a
   subscription to the LbyR URI on the LIS. The LIS would also handle
   all authentication and authorization of location requests, which is
   also not performed with DHCP, therefore not defined here.



Polk                      Expires May 18th 2008                [Page 5]

Internet-Draft        Geopriv DHCP LbyR URI Option             Nov 2007

   In the case of residential gateways being DHCP servers, they usually
   perform as DHCP clients in a hierarchical fashion up into a service
   provider's network DHCP server(s), or learn what information to
   provide via DHCP to residential clients through a protocol such as
   PPP.  In these cases, the LbyR URI would likely indicate the
   residence's civic address to all wired or wireless clients within
   that residence.  This is not inconsistent with what's stated above.


3.1 Architectural Assumptions

   The following assumptions have been made for use of this URI Option
   for a client to learn it's location URI (in no particular order):

   o  Any user control (what Geopriv calls a 'rulemaker') for the
      parameters and profile options a Location-Object will have is out
      of scope of this document, by assumed to take place via something
      such as a web interface between the user and the LIS (direct or
      indirect).

   o  Any user attempting to gain access to the information at this URI
      will be challenged by the LIS, not the DHCP server for
      credentials and permissions.


3.2 Harmful URIs and URLs

   There are, in fact, some types of URIs that are not good to receive,
   due to security concerns.  For example, any URLs that can have
   scripts, such as "data:" URLs, and some "HTTP:" URLs that go to web
   pages - that have scripts.  Therefore,

   o URIs received via this Option SHOULD NOT be sent to a
     general-browser to connect to a web page, because they could have
     harmful scripts.

   o This Option SHOULD NOT contain "data:" URLs, because they could
     have harmful scripts.


   This concern will be highlighted more in a future version of this
   document.


4.  Acknowledgements

   Thanks to James Winterbottom for his useful comments. And to Lisa
   Dusseault for her concerns about the types of URIs that can cause
   harm.





Polk                      Expires May 18th 2008                [Page 6]

Internet-Draft        Geopriv DHCP LbyR URI Option             Nov 2007

5.  IANA Considerations

   IANA is requested to assigned a DHCP option code of XXX for the
   Location URI option, defined in Section 2.0 of this document.

   Any additional Location URI parameters to be defined for use via
   this DHC Option MUST be done through a Standards Track RFC.


6.  Security Considerations

   Where critical decisions might be based on the value of this
   LbyR URI option, DHCP authentication in [RFC3118] SHOULD be used to
   protect the integrity of the DHCP options.

   Since there is no privacy protection for DHCP messages, an
   eavesdropper who can monitor the link between the DHCP server and
   requesting client can discover this LbyR URI.  Other than capturing
   the URI, the location of the client benefits from the protection of
   whatever server challenge mechanisms are available and configured
   for any device attempting access of the location record that the
   URI.

   LbyR URIs need to reduce or eliminate client identity information
   within the URI itself, because DHCP is a cleartext delivery
   protocol.

   When implementing a DHC server that will serve clients across an
   uncontrolled network, one should consider the potential security
   risks therein.



7.  References

7.1.  Normative References

 [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
           Requirement Levels", BCP 14, RFC 2119, March 1997.

 [RFC3046] Patrick, M., "DHCP Relay Agent Information Option", RFC
           3046, January 2001.

 [RFC2131] Droms, R., "Dynamic Host Configuration Protocol", RFC 2131,
           March 1997.

 [RFC3118] Droms, R. and W. Arbaugh, "Authentication for DHCP
           Messages", RFC 3118, June 2001.

 [RFC3261] J. Rosenberg, H. Schulzrinne, G. Camarillo, A. Johnston, J.
           Peterson, R. Sparks, M. Handley, and E. Schooler, "SIP:
           Session Initiation Protocol", RFC 3261, May 2002.


Polk                      Expires May 18th 2008                [Page 7]

Internet-Draft        Geopriv DHCP LbyR URI Option             Nov 2007


 [RFC3265] Roach, A., "Session Initiation Protocol (SIP)-Specific
           Event Notification", RFC 3265, June 2002.


7.2.  Informative References

 [ID-SIP-LOC] J. Polk, B. Rosen, "SIP Location Conveyance",
           draft-ietf-sip-location-conveyance-09.txt, "work in
           progress", Nov 2007

 [RFC3825] J. Polk, J. Schnizlein, M. Linsner, "Dynamic Host
           Configuration Protocol Option for Coordinate-based Location
           Configuration Information", RFC 3825, July 2004

 [RFC4776] H. Schulzrinne, " Dynamic Host Configuration Protocol
           (DHCPv4 and DHCPv6) Option for Civic Addresses Configuration
           Information ", RFC 4776, November 2006

 [ID-LBYR-REQ] R. Marshall, "Requirements for a Location-by-Reference
           Mechanism", draft-ietf-geopriv-lbyr-requirements-01.txt,
           "work in progress", Oct 07


Authors' Address

   James Polk
   3913 Treemont Circle
   Colleyville, Texas 76034
   USA

   EMail: jmpolk@cisco.com


Full Copyright Statement

   Copyright (C) The IETF Trust (2007).

   This document is subject to the rights, licenses and restrictions
   contained in BCP 78, and except as set forth therein, the authors
   retain all their rights.

   This document and the information contained herein are provided on
   an "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE
   REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE
   IETF TRUST AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL
   WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY
   WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE
   ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS
   FOR A PARTICULAR PURPOSE.




Polk                      Expires May 18th 2008                [Page 8]

Internet-Draft        Geopriv DHCP LbyR URI Option             Nov 2007

Intellectual Property

   The IETF takes no position regarding the validity or scope of any
   Intellectual Property Rights or other rights that might be claimed
   to pertain to the implementation or use of the technology described
   in this document or the extent to which any license under such
   rights might or might not be available; nor does it represent that
   it has made any independent effort to identify any such rights.
   Information on the procedures with respect to rights in RFC
   documents can be found in BCP 78 and BCP 79.

   Copies of IPR disclosures made to the IETF Secretariat and any
   assurances of licenses to be made available, or the result of an
   attempt made to obtain a general license or permission for the use
   of such proprietary rights by implementers or users of this
   specification can be obtained from the IETF on-line IPR repository
   at http://www.ietf.org/ipr.

   The IETF invites any interested party to bring to its attention any
   copyrights, patents or patent applications, or other proprietary
   rights that may cover technology that may be required to implement
   this standard.  Please address the information to the IETF at
   ietf-ipr@ietf.org.


Acknowledgment

   Funding for the RFC Editor function is provided by the IETF
   Administrative Support Activity (IASA).

























Polk                      Expires May 18th 2008                [Page 9]


Html markup produced by rfcmarkup 1.111, available from https://tools.ietf.org/tools/rfcmarkup/