[Docs] [txt|pdf|xml|html] [Tracker] [WG] [Email] [Diff1] [Diff2] [Nits]

Versions: 00 01

Internet Engineering Task Force                              A. Malhotra
Internet-Draft                                         Boston University
Intended status: Informational                                A. Langley
Expires: September 12, 2019                                       Google
                                                                 W. Ladd
                                                          March 11, 2019



   This document specifies Roughtime - a protocol that aims to achieve
   rough time synchronization while detecting servers that provide
   inaccurate time and providing cryptographic proof of their

Status of This Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at https://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on September 12, 2019.

Copyright Notice

   Copyright (c) 2019 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (https://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of

Malhotra, et al.       Expires September 12, 2019               [Page 1]

Internet-Draft                  Roughtime                     March 2019

   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

1.  Motivation

   Time synchronization is essential to Internet security as many
   security protocols and other applications require synchronization
   [RFC7384][MCBG].  Unfortunately widely deployed protocols such as the
   Network Time Protocol (NTP) [RFC5905] lack essential security
   features, and even newer protocols like Network Time Security (NTS)
   [I-D.ietf-ntp-using-nts-for-ntp] fail to ensure that the servers
   behave correctly.  Authenticating time servers prevents network
   adversaries from modifying time packets, but an authenticated time
   server still has full control over the contents of time packet and
   may go rogue.  The Roughtime protocol provides cryptographic proof of
   malfeasance, enabling clients to detect and prove to a third party
   server's attempts to influence the time a client computes.

   |   Protocol   | Authenticated Server | Server Malfeasance Evidence |
   | NTP, Chronos |          N           |              N              |
   |   NTP-MD5    |          Y*          |              N              |
   | NTP-Autokey  |         Y**          |              N              |
   |     NTS      |          Y           |              N              |
   |  Roughtime   |          Y           |              Y              |

                 Security Properties of current protocols

                                  Table 1

   Y* For security issues with symmetric-key based NTP-MD5
   authentication, please refer to Message Authentication Code for the
   Network Time Protocol draft [I-D.ietf-ntp-mac]

   Y** For security issues with Autokey Public Key Authentication, refer
   to [Autokey]

2.  Requirements Language

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "OPTIONAL" in this document are to be interpreted as described in BCP
   14 [RFC2119] [RFC8174] when, and only when, they appear in all
   capitals, as shown here.

Malhotra, et al.       Expires September 12, 2019               [Page 2]

Internet-Draft                  Roughtime                     March 2019

3.  Protocol Overview

   Roughtime is a protocol for rough time synchronization that enables
   clients to provide cryptographic proof of server malfeasance.  It
   does so by having responses from servers include a signature with a
   certificate rooted in long term public/private key pair over a
   portion of the initial request, thus providing cryptographic proof
   that the timestamp was issued after previous responses and before
   future ones.

   Single server mode: At its most basic level, Roughtime is a one round
   protocol in which a completely fresh client requests the current time
   and the server sends a signed response.  The response includes a
   timestamp (the number of microseconds since the Unix epoch) and a
   radius (in microseconds) used to indicate the server's certainty
   about the reported time.  For example, a radius of 1,000,000
   microseconds means the server is absolutely confident that the true
   time is within one second of the reported time.

   The server proves freshness of its response as follows: The request
   contains a random challenge.  The server incorporates the challenge
   into its signed response so that its needed to verify the signature.
   This proves that the signed response could only have been generated
   after the challenge was issued if the challenge has sufficient

   Chaining multiple servers: For subsequent requests, the client
   generates its nonce by hashing the reply from the first server with a
   random value.  This proves that the nonce was created after the reply
   from the first server.  It sends that to the second server and
   receives a signature from it covering that nonce and the time from
   the second server.

   Cryptographic proof of misbehavior: If the time from the second
   server is before the first, then the client has proof of misbehavior;
   the reply from the second server implicitly shows that it was created
   later because of the way that the client constructed the nonce.  If
   the time from the second server is after, then the client can contact
   the first server again and get a signature that was provably created
   afterwards, but with an earlier timestamp.

   With only two servers, the client can end up with proof that
   something is wrong, but no idea what the correct time is.  But with
   half a dozen or more independent servers, the client will end up with
   chain of proof of any server's misbehavior, signed by several others,
   and (presumably) enough accurate replies to establish what the
   correct time is.  Furthermore this proof may be validated by third

Malhotra, et al.       Expires September 12, 2019               [Page 3]

Internet-Draft                  Roughtime                     March 2019

   parties ultimately leading to a revocation of trust in the
   misbehaving server.

4.  Message Format

   A uint32 is a 32 bit unsigned integer.  It is serialized in bytes
   with the least significant byte first.  A uint64 is a 64 bit unsigned
   integer.  It is also seralized with the least significant byte first.

   A Roughtime packet is a UDP packet whose contents are interpreted as
   a map from uint32s to strings of bytes.  The byte strings must all
   have lengths a multiple of four.  All uint32 are encoded with the
   least significant byte first.  The keys of this map are called tags,
   and we speak of the value of a tag as the string of bytes it is
   mapped to.

   A Roughtime packet is serialized as follows: First there is a header,
   The first four bytes in the header are the uint32 number of tags N,
   and hence of (tag, value) pairs.  4*(N-1) bytes are offsets, each
   offset a uint32.  The last 4*N bytes are the tags.

   Tags are in ascending order, and no tag can be repeated.  Offsets are
   all a multiple of four and MUST be strictly increasing.  The offset
   array is considered to have a not explicitly encoded value of 0 as
   its zeroeth entry.

   Immediately following the header is a concatenation of all the
   strings.  The first post-header byte is at offset 0, and the end of
   the final byte string is indicated by the end of the packet.  The ith
   byte string ends at offset[i+1]-1, counting of course from 0, and
   begins at offset[i].  It is the value associated to the ith tag.

   This encoding may be recursive: a value may be said to be in
   Roughtime format and thus have a header, etc.  Tags may be listed as
   four ASCII characters [RFC0020].  In this case the tag when
   serialized will be those four ASCII characters.  For example NONC
   would be the numeric value 0x434e4f4e.  They may also be listed as
   fewer then four ASCII characters with hex escape codes at the end.

5.  Protocol

5.1.  Queries

   A query is a Roughtime packet with the tag NONC.  The contents of
   NONC are 64 bytes.  The request packet MUST be a minimum of 1024
   bytes.  To attain this size the tag PAD\xff MAY be added at the end
   of the packet with a conent of all zeros.  Other tags MUST be ignored

Malhotra, et al.       Expires September 12, 2019               [Page 4]

Internet-Draft                  Roughtime                     March 2019

   by the server.  Future versions may specify additional tags and their
   semantics, so clients MUST NOT add other tags.

5.2.  Responses

   A response contains the following tags: SREP, SIG\x00, CERT, INDX,
   PATH, SREP value is itself in Roughtime format that contains the
   folowing tags: ROOT, MIDP, RADI.  SIG\x00 is an Ed25519 signature
   [RFC8032] over the SREP value using the public key contained in CERT
   as explained later.

   CERT in Roughtime format and contains the following tags: DELE,
   SIG\x00.  This SIG\x00 is an Ed25519 signature over DELE that can be
   verified using the long term public key of the server.  DELE is
   itself in Roughtime format containing tags MINT, MAXT, PUBK.

5.2.1.  SREP

      ROOT contains the root hash value of a Merkle tree using SHA512 as
      described when we reach the PATH and INDX blocks

      MIDP contains an uint64 value consisting of the number of
      microseconds since the Unix epoch.

      RADI contains the server's estimate of the accuracy of MIDP.
      Servers MUST ensure the true time is within (MIDP-RADI, MIDP+RADI)
      at the time they compose the response packet.

      LEAP contains the TAI-UTC offset at MIDP as a signed 32 bit
      integer in two's complement.  In cases of ambiguity due to leap
      seconds either acceptable offset result is acceptable.

5.2.2.  DELE

      MINT is the minimum uint64 timestamp at which the key in PUBK is
      trusted to begin signing time.  MIDP > MINT for validity.

      MAXT is the maximum uint64 timestamp at which PUBK may sign.  MIDP
      < MAXT for validity.

      PUBK is a temporary Ed25519 public key.  The use of this field is
      to enable seperation of a root public key from keys on devices
      exposed to the public Internet.

Malhotra, et al.       Expires September 12, 2019               [Page 5]

Internet-Draft                  Roughtime                     March 2019

5.2.3.  INDX and PATH

   INDX is a uint32 determining the position of NONC in a Merkle tree.
   PATH contains the values to be hashed with the running hash as one
   ascends the tree.  PATH is a multiple of 64 bytes long.  The
   following algorithm verifies inclusion in the Merkle tree:

   One starts by computing the hash of the NONC value from the request,
   with \x00 preappended.  Then one walks from the least significant bit
   of INDX to the most significant bit, and also walks towards the end
   of PATH.

   If PATH ends then the remaining bits of the INDX MUST be all zero.
   This indicates the termination of the walk, and the current value
   MUST equal ROOT if the response is valid.

   If the current bit is 0, one hashes \x01, the current hash, and the
   value from PATH.

   If the current bit is 1 one hashes \x01, the value from PATH, and the
   current hash.

5.3.  Validity of response

   A client MUST check the following properties when it receives a
   response.  We assume the long term server public key is known to the
   client through other means.

      The signature in CERT was made with the long-term key of the

      The DELE timestamps and the MIDP value are consistent

      The INDX and PATH values prove NONC was included in the Merkle
      tree with value ROOT

      The signature of SREP in SIG\x00 validates with the public key in

   A response that passes these checks is said to be valid.  Validity of
   a response does not prove the time is correct, but merely that the
   server signed it, and more specifically began to compute the
   signature at a time in between (MIDP-RADI, MIDP+RADI).

Malhotra, et al.       Expires September 12, 2019               [Page 6]

Internet-Draft                  Roughtime                     March 2019

6.  Time

   All times in Roughtime are the number of seconds since the Unix
   epoch.  The Unix epoch is midnight, 1 January, 1970.  This is a
   constant offset from TAI.  Servers SHOULD use GPS or other
   realizations of TAI that have been highly accurate in the past for
   Roughtime to meet their accuracy promises.

7.  Cheater detection

   A chain of responses is a series of responses where the SHA-512 hash
   of the preceding response H, is concatenated with a 64 byte blind X,
   and then SHA-512(H, X) is the NONC used in the subsequent response.
   These may be represented as an array of objects in JSON where each
   object may have keys "blind" and "packet".  Packet has the base64
   encoded bytes of the packet and blind is the blind used for the next
   nonce.  The last packet needs no blind.

   A pair of responses (r_1, r_2) is invalid if MIDP_1-RADI_1 >
   MIDP_2+RADI_2.  A chain of longer length is invalid if for any i, j
   such that i < j, (r_i, r_j) is an invalid pair.

   Invalidity of a chain is proof that causality has been violated if
   all servers were reporting correct time.  An invalid chain where all
   individual responses are valid is cryptographic proof of malfeasance
   of at least one server: if all servers had the correct time in the
   chain, causality would imply that MIDP_1-RADI_1 < MIDP_2+RADI_2.

8.  Grease

   Servers MAY send back a fraction of responses that are syntactically
   invalid or contain invalid signatures as well as incorrect times.
   Clients MUST properly reject such responses.  Servers MUST NOT send
   back responses with incorrect times and valid signatures.  Either
   signature MAY be invalid for this application.

9.  Roughtime Servers

   The below list contains a list of servers with their public keys in
   Base64 format.


      roughtime.cloudflare.com:2002; gD63hSj3ScS+wuOeGrubXlq35N1c5Lby/

Malhotra, et al.       Expires September 12, 2019               [Page 7]

Internet-Draft                  Roughtime                     March 2019


10.  Trust anchors and policies

   A trust anchor is any distributor of a list of trusted servers.  It
   is RECOMMENDED that trust anchors subscribe to TBD where evidence of
   malfeasance may be shared and discussed.  Trust anchors SHOULD
   subscribe to a zero-tolerance policy: any generation of incorrect
   timestamps will result in removal.  To enable this trust anchors
   SHOULD list a wide variety of servers so the removal of a server does
   not result in operational issues for clients.  Clients SHOULD attempt
   to detect malfeasance and have a way to report it to trust anchors.

   Trust anchors SHOULD include any roughtime server with an uptime
   greater then 99.9% over the past 6 months and with no malfeasance.
   They SHOULD also aggressively collect evidence of such malfeasance.

   Because only a single roughtime server is required for successful
   synchronization, Roughtime does not have the incentive problems that
   have prevented effective enforcement of discipline on the web PKI.
   We expect that some clients will aggressively monitor server

11.  Acknowledgements

   Thomas Peterson corrected multiple nits.  Marcus Dansarie, Tal
   Mizrahi, and the other members of the NTP working group contributed
   comments and suggestions.

12.  IANA Considerations

   We request IANA assign a UDP port and create a new registry for
   Roughtime tags.

13.  Security Considerations

   This protocol will not survive the advent of quantum computers.
   Currently only one signature scheme is supported.  Maintaining a list
   of trusted servers and adjudicating violations of the rules by
   servers are not discussed in this document and are essential for
   security.  Arithmetic on the adjusted timescale is interesting with
   intervals, and this may impact the interpretation of the MAXT and
   MINT fields.  Servers carry out a significant amount of computation
   in response to clients, and thus may experience vulnerability to
   denial of service attacks.

Malhotra, et al.       Expires September 12, 2019               [Page 8]

Internet-Draft                  Roughtime                     March 2019

   This protocol does not provide any confidentiality, and given the
   nature of timestamps such impact is minor.  The compromise of a
   PUBK's private key, even past MAXT, is a problem as the private key
   can be used to sign invalid times that are in the range MINT to MAXT,
   and thus violate the good behavior guarantee of the server.

   Roughtime clients MUST update their view of which servers are
   trustworthy in order to benefit from the detection of misbehavior.

   Packets sent by the client MUST be at least 1024 bytes in length in
   order to mitigate amplification attacks, and servers MUST ignore
   request packets that are smaller than this length.

14.  Privacy Considerations

   This protocol is designed to obscure all client identifiers.  Servers
   necessarily have persistent long term identities essential to
   enforcing correct behavior.

15.  References

15.1.  Normative References

   [RFC0020]  Cerf, V., "ASCII format for network interchange", STD 80,
              RFC 20, DOI 10.17487/RFC0020, October 1969,

   [RFC8032]  Josefsson, S. and I. Liusvaara, "Edwards-Curve Digital
              Signature Algorithm (EdDSA)", RFC 8032,
              DOI 10.17487/RFC8032, January 2017,

15.2.  Informative References

   [Autokey]  Rottger, S., "Analysis of the NTP Autokey Procedures",
              2012, <https://zero-entropy.de/autokey_analysis.pdf>.

              Malhotra, A. and S. Goldberg, "Message Authentication Code
              for the Network Time Protocol", draft-ietf-ntp-mac-06
              (work in progress), January 2019.

              Franke, D., Sibold, D., Teichel, K., Dansarie, M., and R.
              Sundblad, "Network Time Security for the Network Time
              Protocol", draft-ietf-ntp-using-nts-for-ntp-17 (work in
              progress), February 2019.

Malhotra, et al.       Expires September 12, 2019               [Page 9]

Internet-Draft                  Roughtime                     March 2019

   [MCBG]     Malhotra, A., Cohen, I., Brakke, E., and S. Goldberg,
              "Attacking the Network Time Protocol", 2015,

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119,
              DOI 10.17487/RFC2119, March 1997,

   [RFC5280]  Cooper, D., Santesson, S., Farrell, S., Boeyen, S.,
              Housley, R., and W. Polk, "Internet X.509 Public Key
              Infrastructure Certificate and Certificate Revocation List
              (CRL) Profile", RFC 5280, DOI 10.17487/RFC5280, May 2008,

   [RFC5905]  Mills, D., Martin, J., Ed., Burbank, J., and W. Kasch,
              "Network Time Protocol Version 4: Protocol and Algorithms
              Specification", RFC 5905, DOI 10.17487/RFC5905, June 2010,

   [RFC7384]  Mizrahi, T., "Security Requirements of Time Protocols in
              Packet Switched Networks", RFC 7384, DOI 10.17487/RFC7384,
              October 2014, <https://www.rfc-editor.org/info/rfc7384>.

   [RFC8174]  Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
              2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
              May 2017, <https://www.rfc-editor.org/info/rfc8174>.

Authors' Addresses

   Aanchal Malhotra
   Boston University
   111 Cummington Mall
   Boston  02215

   Email: aanchal4@bu.edu

   Adam Langley

Malhotra, et al.       Expires September 12, 2019              [Page 10]

Internet-Draft                  Roughtime                     March 2019

   Watson Ladd
   101 Townsend St
   San Francisco

   Email: watson@cloudflare.com

Malhotra, et al.       Expires September 12, 2019              [Page 11]

Html markup produced by rfcmarkup 1.129c, available from https://tools.ietf.org/tools/rfcmarkup/