[Docs] [txt|pdf] [Tracker] [WG] [Email] [Diff1] [Diff2] [Nits]

Versions: 00 01 02 03 draft-ietf-mpls-static-yang

MPLS Working Group                                               T. Saad
Internet-Draft                                                   K. Raza
Intended status: Standards Track                               R. Gandhi
Expires: September 22, 2016                            Cisco Systems Inc
                                                                  X. Liu
                                                                Ericsson
                                                               V. Beeram
                                                        Juniper Networks
                                                                 H. Shah
                                                                   Ciena
                                                                 X. Chen
                                                     Huawei Technologies
                                                                R. Jones
                                                                 Brocade
                                                                  B. Wen
                                                                 Comcast
                                                          March 21, 2016


            A YANG Data Model for MPLS Base and Static LSPs
                     draft-saad-mpls-static-yang-02

Abstract

   This document contains a specification of two YANG modules, the MPLS
   base, and Static LSP YANG modules.  The MPLS base YANG module serves
   as a base framework for configuring and managing an MPLS switching
   subsystem.  The MPLS Static LSP module augments the MPLS base YANG
   module with specific data to configure and manage MPLS Static LSP(s).
   It is expected that other MPLS YANG modules for MPLS technology YANG
   modules (e.g.  MPLS LDP or MPLS RSVP-TE) will also augment the MPLS
   YANG base model.

Status of This Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at http://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."




Saad, et al.           Expires September 22, 2016               [Page 1]


Internet-Draft    MPLS Base and Static YANG Data Models       March 2016


   This Internet-Draft will expire on September 22, 2016.

Copyright Notice

   Copyright (c) 2016 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   2
     1.1.  Terminology . . . . . . . . . . . . . . . . . . . . . . .   2
   2.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   3
     2.1.  Overview  . . . . . . . . . . . . . . . . . . . . . . . .   3
       2.1.1.  MPLS Base Tree Diagram  . . . . . . . . . . . . . . .   4
       2.1.2.  MPLS Static LSP Tree Diagram  . . . . . . . . . . . .   4
     2.2.  YANG Modules  . . . . . . . . . . . . . . . . . . . . . .   6
       2.2.1.  MPLS Base Module  . . . . . . . . . . . . . . . . . .   6
       2.2.2.  MPLS Static LSP YANG Module . . . . . . . . . . . . .   8
   3.  IANA Considerations . . . . . . . . . . . . . . . . . . . . .  13
   4.  Security Considerations . . . . . . . . . . . . . . . . . . .  13
   5.  References  . . . . . . . . . . . . . . . . . . . . . . . . .  14
     5.1.  Normative References  . . . . . . . . . . . . . . . . . .  14
     5.2.  Informative References  . . . . . . . . . . . . . . . . .  14
   Authors' Addresses  . . . . . . . . . . . . . . . . . . . . . . .  15

1.  Introduction

   AAA

1.1.  Terminology

   In this document, the key words "MUST", "MUST NOT", "REQUIRED",
   "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY",
   and "OPTIONAL" are to be interpreted as described in BCP 14, RFC 2119
   [RFC2119].

   The following terms are defined in [RFC6020]:




Saad, et al.           Expires September 22, 2016               [Page 2]


Internet-Draft    MPLS Base and Static YANG Data Models       March 2016


   o augment,

   o configuration data,

   o data model,

   o data node,

   o feature,

   o mandatory node,

   o module,

   o schema tree,

   o state data,

   o RPC operation.

2.  Introduction

   A core routing data model is defined in
   [I-D.ietf-netmod-routing-cfg], and it proposes a basis for the
   development of data models for routing protocols.  The MPLS base
   model augments this model with additional data specific to MPLS
   switching.  The interface data model is defined in [RFC7223] and is
   used for referencing interface from the MPLS base model.

   This document contains a specification of the following YANG modules:

   o  Module "ietf-mpls" provides base components of the MPLS data
      model.

   o  Module "ietf-mpls-static" that augments "ietf-mpls" with
      additional data specific to configuration and management of Static
      LSPs.

   Note, it is expected that other MPLS YANG models to augment the
   "ietf-mpls" base model to define specific data to other MPLS
   technologies (e.g.  MPLS LDP or MPLS RSVP-TE).

2.1.  Overview

   The MPLS base YANG module augments the "routing/routing-instance/
   routing- protocols/routing-protocol" path for the "rw" branch, and
   augments path "routing-state/routing-instance/routing- protocols/
   routing-protocol" for the "ro" branch of the ietf-routing module.



Saad, et al.           Expires September 22, 2016               [Page 3]


Internet-Draft    MPLS Base and Static YANG Data Models       March 2016


   The approach described in [I-D.openconfig-netmod-opstate] is adopted
   to represent data pertaining to configuration intended, applied state
   and derived state data elements.  Each container in the model holds a
   "config" and "state" sub-container.  The "config" sub-container is
   used to represent the intended configurable parameters, and the state
   sub-container is used to represent both the applied configurable
   parameters and any derived state, such as counters or statistical
   information.

2.1.1.  MPLS Base Tree Diagram

   The MPLS base tree diagram is shown in Figure 1.

   module: ietf-mpls
   augment /rt:routing:
      +--rw mpls
         +--rw interface* [name]
            +--rw name      if:interface-ref
            +--rw config
            |  +--rw enabled?   boolean
            +--ro state
               +--ro enabled?   boolean
   augment /rt:routing-state:
      +--ro mpls

                     Figure 1: MPLS Base tree diagram

2.1.2.  MPLS Static LSP Tree Diagram

   The MPLS Static LSP tree diagram is shown in Figure 2.

module: ietf-mpls
augment /rt:routing:
   +--rw mpls
      +--rw interface* [name]
      |  +--rw name      if:interface-ref
      |  +--rw config
      |  |  +--rw enabled?   boolean
      |  +--ro state
      |     +--ro enabled?   boolean
      +--rw mpls-static:static-lsps
         +--rw mpls-static:static-lsp* [name]
            +--rw mpls-static:name      string
            +--rw mpls-static:config
            |  +--rw mpls-static:in-segment
            |  |  +--rw (type)?
            |  |     +--:(ip-prefix)
            |  |     |  +--rw mpls-static:ip-prefix? inet:ip-prefix



Saad, et al.           Expires September 22, 2016               [Page 4]


Internet-Draft    MPLS Base and Static YANG Data Models       March 2016


            |  |     +--:(mpls-label)
            |  |        +--rw mpls-static:incoming-label?mpls:mpls-label
            |  +--rw mpls-static:operation?            enumeration
            |  +--rw (out-segment)?
            |     +--:(simple-path)
            |     |  +--rw mpls-static:next-hop?       inet:ip-address
            |     |  +--rw mpls-static:outgoing-label? mpls:mpls-label
            |     |  +--rw mpls-static:outgoing-interface?
            |     +--:(path-list)
            |        +--rw mpls-static:paths* [path-index]
            |           +--rw mpls-static:path-index         uint32
            |           +--rw mpls-static:backup-path-index? uint32
            |           +--rw mpls-static:next-hop?  inet:ip-address
            |           +--rw mpls-static:outgoing-labels* [index]
            |           |  +--rw mpls-static:index    uint32
            |           |  +--rw mpls-static:label?   mpls:mpls-label
            |           +--rw mpls-static:outgoing-interface?
            |           +--rw mpls-static:loadshare? mpls:percent
            |           +--rw mpls-static:role?      enumeration
            +--ro mpls-static:state
               +--ro mpls-static:in-segment
               |  +--ro (type)?
               |     +--:(ip-prefix)
               |     |  +--ro mpls-static:ip-prefix? inet:ip-prefix
               |     +--:(mpls-label)
               |        +--ro mpls-static:incoming-label?mpls:mpls-label
               +--ro mpls-static:operation?            enumeration
               +--ro (out-segment)?
                  +--:(simple-path)
                  |  +--ro mpls-static:next-hop?       inet:ip-address
                  |  +--ro mpls-static:outgoing-label? mpls:mpls-label
                  |  +--ro mpls-static:outgoing-interface?
                  +--:(path-list)
                     +--ro mpls-static:paths* [path-index]
                        +--ro mpls-static:path-index            uint32
                        +--ro mpls-static:backup-path-index?    uint32
                        +--ro mpls-static:next-hop? inet:ip-address
                        +--ro mpls-static:outgoing-labels* [index]
                        |  +--ro mpls-static:index    uint32
                        |  +--ro mpls-static:label?   mpls:mpls-label
                        +--ro mpls-static:outgoing-interface?
                        +--ro mpls-static:loadshare? mpls:percent
                        +--ro mpls-static:role?      enumeration
augment /rt:routing-state:
   +--ro mpls

                  Figure 2: MPLS Static LSP tree diagram




Saad, et al.           Expires September 22, 2016               [Page 5]


Internet-Draft    MPLS Base and Static YANG Data Models       March 2016


2.2.  YANG Modules

2.2.1.  MPLS Base Module

   <CODE BEGINS>file "ietf-mpls@2016-03-21.yang"

   module ietf-mpls {

     namespace "urn:ietf:params:xml:ns:yang:ietf-mpls";

     prefix "mpls";

     import ietf-routing {
       prefix "rt";
     }

     import ietf-interfaces {
       prefix "if";
     }

     organization "TBD";

     contact "TBD";

     description
       "This YANG module defines the essential components for the
        management of the MPLS subsystem.";

     revision "2016-03-21" {
       description
         "Initial revision";
       reference "RFC 3031: A YANG Data Model for base MPLS";
     }

     typedef mpls-label {
       type uint32 {
         range "0..1048575";
       }
       description
         "The MPLS label range";
     }

     typedef percent {
       type uint16 {
         range "0 .. 100";
       }
       description "Percentage";
     }



Saad, et al.           Expires September 22, 2016               [Page 6]


Internet-Draft    MPLS Base and Static YANG Data Models       March 2016


     grouping interface-mpls {
       description "MPLS interface properties grouping";
       leaf enabled {
         type boolean;
         description
           "'true' if mpls encapsulation is enabled on the
            interface. 'false' if mpls encapsulation is enabled
            on the interface.";
       }
     }

     augment "/rt:routing" {
       description "MPLS augmentation.";
       container mpls {
         description
           "MPLS container, to be used as an augmentation target node
            other MPLS sub-features config, e.g. MPLS static LSP, MPLS
            LDP LSPs, and Trafic Engineering MPLS LSP Tunnels, etc.";

         list interface {
           key "name";
           description "List of MPLS interfaces";
           leaf name {
             type if:interface-ref;
             description
               "The name of a configured MPLS interface";
           }
           container config {
             description "Holds intended configuration";
             uses interface-mpls;
           }
           container state {
             config false;
             description "Holds inuse configuration";
             uses interface-mpls;
           }
         }
       }
     }

     augment "/rt:routing-state" {
       description "MPLS augmentation.";
       container mpls {
         config false;
         description
           "MPLS container, to be used as an augmentation target node
            other MPLS sub-features state";
       }



Saad, et al.           Expires September 22, 2016               [Page 7]


Internet-Draft    MPLS Base and Static YANG Data Models       March 2016


     }
   }

   <CODE ENDS>

                      Figure 3: MPLS base YANG module

2.2.2.  MPLS Static LSP YANG Module

   <CODE BEGINS>file "ietf-mpls-static@2016-03-21.yang"

   module ietf-mpls-static {

     namespace "urn:ietf:params:xml:ns:yang:ietf-mpls-static";

     prefix "mpls-static";

     import ietf-mpls {
       prefix mpls;
     }

     import ietf-routing {
       prefix "rt";
     }

     import ietf-inet-types {
       prefix inet;
     }

     import ietf-interfaces {
       prefix "if";
     }

     organization "TBD";

     contact "TBD";

     description
        "This YANG module augments the 'ietf-routing' module with basic
        configuration and operational state data for MPLS static";

     revision "2016-03-21" {
       description
         "Initial revision";
       reference
         "RFC 3031: A YANG Data Model for MPLS Static";
     }




Saad, et al.           Expires September 22, 2016               [Page 8]


Internet-Draft    MPLS Base and Static YANG Data Models       March 2016


     grouping path-basic_config {
       description "common definitions for statics";

       leaf next-hop {
         type inet:ip-address;
         description "next hop IP address for the LSP";
       }

       leaf outgoing-label {
         type mpls:mpls-label;
         description
           "label value to push at the current hop for the
            LSP";
       }

       leaf outgoing-interface {
         type if:interface-ref;
         description
           "The outgoing interface";
       }

     }

     grouping path-properties_config {
       description
         "MPLS path properties";
       leaf path-index {
         type uint32;
         description
           "Path identifier";
       }

       leaf backup-path-index {
         type uint32;
         description
           "Backup path identifier";
       }

       leaf next-hop {
         type inet:ip-address;
         description
           "The address of the next-hop";
       }

       list outgoing-labels {
         key index;
         description
           "The outgoing MPLS labels to impose";



Saad, et al.           Expires September 22, 2016               [Page 9]


Internet-Draft    MPLS Base and Static YANG Data Models       March 2016


         leaf index {
           type uint32;
           description
             "The index of the label, lower indices are closer to
              the top";
         }
         leaf label {
           type mpls:mpls-label;
           description
             "The MPLS label value";
         }
       }

       leaf outgoing-interface {
         type if:interface-ref;
         description
           "The outgoing interface";
       }

       leaf loadshare {
         type mpls:percent;
         description
           "The percentage of total load tto carry on this path";
       }

       leaf role {
         type enumeration {
           enum PRIMARY {
             description
               "Path as primary traffic carrying";
           }
           enum BACKUP {
             description
               "Path acts as backup";
           }
           enum PRIMARY_AND_BACKUP {
             description
               "Path acts as primary and backup simultaneously";
           }
         }
         description
           "The MPLS path role";
       }
     }

     grouping static-lsp_config {
       description "common definitions for static LSPs";




Saad, et al.           Expires September 22, 2016              [Page 10]


Internet-Draft    MPLS Base and Static YANG Data Models       March 2016


       container in-segment {
         description
           "MPLS incoming segment";
         choice type {
           description
             "Basic FEC choice";
           case ip-prefix {
             leaf ip-prefix {
               type inet:ip-prefix;
               description "An IP prefix";
             }
           }
           case mpls-label {
             leaf incoming-label {
               type mpls:mpls-label;
               description "label value on the incoming packet";
             }
           }
         }
       }

       leaf operation {
         type enumeration {
           enum impose-and-forward {
             description
               "Operation impose outgoing label(s) and forward to
                next-hop";
           }
           enum pop-and-forward {
             description
               "Operation pop outgoing label and forward to next-hop";
           }
           enum pop-impose-and-forward {
             description
               "Operation pop incoming label, impose one or more
                outgoing label(s) and forward to next-hop";
           }
           enum swap-and-forward {
             description
               "Operation swap incoming label, with outgoing label and
                forward to next-hop";
           }
           enum pop-and-lookup {
             description
               "Operation pop incoming label and perform a lookup";
           }
         }
         description



Saad, et al.           Expires September 22, 2016              [Page 11]


Internet-Draft    MPLS Base and Static YANG Data Models       March 2016


           "The MPLS operation to be executed on the incoming packet";
       }

       choice out-segment {
         description "The MPLS out-segment type choice";
         case simple-path {
           uses path-basic_config;
         }
         case path-list {
           list paths {
             key path-index;
             description
               "The list of MPLS paths associated with the FEC";
             uses path-properties_config;
           }
         }
       }
     }

     grouping static-lsp {
       description "grouping for top level list of static LSPs";
       container config {
         description
           "Holds the intended configuration";
         uses static-lsp_config;
       }
       container state {
         config false;
         description
           "Holds the state and inuse configuration";
         uses static-lsp_config;
       }
     }

     augment "/rt:routing/mpls:mpls" {
       description "Augmentations for MPLS Static LSPs";
       container static-lsps {
         description
           "Statically configured LSPs, without dynamic signaling";
         list static-lsp {
           key name;
           description "list of defined static LSPs";

           leaf name {
             type string;
             description "name to identify the LSP";
           }
           uses static-lsp;



Saad, et al.           Expires September 22, 2016              [Page 12]


Internet-Draft    MPLS Base and Static YANG Data Models       March 2016


         }
       }
     }
   }

   <CODE ENDS>

                   Figure 4: MPLS Static LSP YANG module

3.  IANA Considerations

   This document registers the following URIs in the IETF XML registry
   [RFC3688].  Following the format in [RFC3688], the following
   registration is requested to be made.

   URI: urn:ietf:params:xml:ns:yang:ietf-mpls XML: N/A, the requested
   URI is an XML namespace.

   URI: urn:ietf:params:xml:ns:yang:ietf-mpls-static XML: N/A, the
   requested URI is an XML namespace.

   This document registers a YANG module in the YANG Module Names
   registry [RFC6020].

   name: ietf-mpls namespace: urn:ietf:params:xml:ns:yang:ietf-mpls
   prefix: ietf-mpls reference: RFC3031

   name: ietf-mpls-static namespace: urn:ietf:params:xml:ns:yang:ietf-
   mpls-static prefix: ietf-mpls-static reference: RFC3031

4.  Security Considerations

   The YANG module defined in this memo is designed to be accessed via
   the NETCONF protocol [RFC6241].  The lowest NETCONF layer is the
   secure transport layer and the mandatory-to-implement secure
   transport is SSH [RFC6242].  The NETCONF access control model
   [RFC6536] provides means to restrict access for particular NETCONF
   users to a pre-configured subset of all available NETCONF protocol
   operations and content.

   There are a number of data nodes defined in the YANG module which are
   writable/creatable/deletable (i.e., config true, which is the
   default).  These data nodes may be considered sensitive or vulnerable
   in some network environments.  Write operations (e.g., <edit-config>)
   to these data nodes without proper protection can have a negative
   effect on network operations.





Saad, et al.           Expires September 22, 2016              [Page 13]


Internet-Draft    MPLS Base and Static YANG Data Models       March 2016


5.  References

5.1.  Normative References

   [I-D.ietf-netmod-routing-cfg]
              Lhotka, L. and A. Lindem, "A YANG Data Model for Routing
              Management", draft-ietf-netmod-routing-cfg-21 (work in
              progress), March 2016.

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119, DOI 10.17487/
              RFC2119, March 1997,
              <http://www.rfc-editor.org/info/rfc2119>.

   [RFC3688]  Mealling, M., "The IETF XML Registry", BCP 81, RFC 3688,
              DOI 10.17487/RFC3688, January 2004,
              <http://www.rfc-editor.org/info/rfc3688>.

   [RFC6020]  Bjorklund, M., Ed., "YANG - A Data Modeling Language for
              the Network Configuration Protocol (NETCONF)", RFC 6020,
              DOI 10.17487/RFC6020, October 2010,
              <http://www.rfc-editor.org/info/rfc6020>.

   [RFC6241]  Enns, R., Ed., Bjorklund, M., Ed., Schoenwaelder, J., Ed.,
              and A. Bierman, Ed., "Network Configuration Protocol
              (NETCONF)", RFC 6241, DOI 10.17487/RFC6241, June 2011,
              <http://www.rfc-editor.org/info/rfc6241>.

   [RFC6242]  Wasserman, M., "Using the NETCONF Protocol over Secure
              Shell (SSH)", RFC 6242, DOI 10.17487/RFC6242, June 2011,
              <http://www.rfc-editor.org/info/rfc6242>.

   [RFC6536]  Bierman, A. and M. Bjorklund, "Network Configuration
              Protocol (NETCONF) Access Control Model", RFC 6536, DOI
              10.17487/RFC6536, March 2012,
              <http://www.rfc-editor.org/info/rfc6536>.

   [RFC7223]  Bjorklund, M., "A YANG Data Model for Interface
              Management", RFC 7223, DOI 10.17487/RFC7223, May 2014,
              <http://www.rfc-editor.org/info/rfc7223>.

5.2.  Informative References

   [I-D.openconfig-netmod-opstate]
              Shakir, R., Shaikh, A., and M. Hines, "Consistent Modeling
              of Operational State Data in YANG", draft-openconfig-
              netmod-opstate-01 (work in progress), July 2015.




Saad, et al.           Expires September 22, 2016              [Page 14]


Internet-Draft    MPLS Base and Static YANG Data Models       March 2016


Authors' Addresses

   Tarek Saad
   Cisco Systems Inc

   Email: tsaad@cisco.com


   Kamran Raza
   Cisco Systems Inc

   Email: skraza@cisco.com


   Rakesh Gandhi
   Cisco Systems Inc

   Email: rgandhi@cisco.com


   Xufeng Liu
   Ericsson

   Email: xufeng.liu@ericsson.com


   Vishnu Pavan Beeram
   Juniper Networks

   Email: vbeeram@juniper.net


   Himanshu Shah
   Ciena

   Email: tsaad@cisco.com


   Xia Chen
   Huawei Technologies

   Email: jescia.chenxia@huawei.com


   Raqib Jones
   Brocade

   Email: raqib@Brocade.com



Saad, et al.           Expires September 22, 2016              [Page 15]


Internet-Draft    MPLS Base and Static YANG Data Models       March 2016


   Bin Wen
   Comcast

   Email: Bin_Wen@cable.comcast.com















































Saad, et al.           Expires September 22, 2016              [Page 16]


Html markup produced by rfcmarkup 1.129b, available from https://tools.ietf.org/tools/rfcmarkup/