[Docs] [txt|pdf] [Tracker] [Email] [Diff1] [Diff2] [Nits]
Versions: 00 01 RFC 3818
Network Working Group Schryver
Internet Draft Rhyolite Software
August 2003
IANA Considerations for the Point-to-Point Protocol (PPP)
draft-schryver-pppext-iana-01.txt
Status of this Memo
This document is an Internet-Draft and is in full conformance with
all provisions of Section 10 of RFC2026.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF), its areas, and its working groups. Note that other
groups may also distribute working documents as Internet-Drafts.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
The list of current Internet-Drafts can be accessed at
http://www.ietf.org/ietf/1id-abstracts.txt.
The list of Internet-Draft Shadow Directories can be accessed at
http://www.ietf.org/shadow.html.
This Internet-Draft will expire on January 15, 2004.
Copyright Notice
Copyright (C) The Internet Society (2003). All Rights Reserved.
Abstract
The charter of the Point-to-Point Protocol Extensions (pppext)
working group includes the responsibility to "actively advance PPP's
most useful extensions to full standard, while defending against
further enhancements of questionable value." In support of that
charter, the allocation of PPP protocol and other assigned numbers
will no longer be "first come first served."
Introduction
The Point-to-Point protocol (PPP, RFC 1661 [1]) is a mature protocol
with a large number of subprotocols, encapsulations and other
extensions. The main protocol as well as its extensions involve many
name spaces in which values must be assigned.
Http://www.iana.org/assignments/ppp-numbers contains a list of the
address spaces and their current assignments.
Historically, initial values in new name spaces have often been
chosen in the RFCs creating the name spaces. The IANA made
subsequent assignments with a "First Come First Served" policy. This
memo changes that policy for some PPP address spaces.
Most of the PPP names spaces are quiescent, but some continue to
attract proposed extensions. Extensions of PPP have been defined in
RFCs that are "Informational" and so are not subject to review.
These extensions usually require values assigned in one or more of
the PPP name spaces. Making these allocations require "IETF
Consensus" will ensure that proposals are reviewed.
Terminology
The terms "name space", "assigned value", and "registration" are used
here with the meanings defined in BCP 26 [2]. The policies "First
Come First Served" and "IETF Consensus" used here also have the
meanings defined in BCP 26.
IANA Considerations for PPP
IETF Consensus, usually through the Point-to-Point Protocol
Extensions (pppext) working group, is required for assigning new
values in the following address spaces:
PPP DLL PROTOCOL NUMBERS
PPP LCP AND IPCP CODES
PPP LCP CONFIGURATION OPTION TYPES
PPP CCP CONFIGURATION OPTION TYPES
PPP CHAP AUTHENTICATION ALGORITHMS
PPP LCP FCS-ALTERNATIVES
PPP MULTILINK ENDPOINT DISCRIMINATOR CLASS
PPP LCP CALLBACK OPERATION FIELDS
PPP BRIDGING CONFIGURATION OPTION TYPES
PPP BRIDGING MAC TYPES
PPP BRIDGING SPANNING TREE
PPP IPCP CONFIGURATION OPTION TYPES
PPP IPV6CP CONFIGURATION OPTIONS
PPP IP-Compression-Protocol Types
4. Security Considerations
This memo deals with matters of process, not protocol.
Normative References
W. Simpson, Ed., "The Point-to-Point Protocol (PPP)", STD 51,
RFC 1661, July 1994.
Alvestrand, H. and T. Narten, "Guidelines for Writing an
IANA Considerations Section in RFCs", BCP 26, RFC 2434,
October 1998.
Author's Address
Vernon Schryver
Rhyolite Software
2482 Lee Hill Drive
Boulder, Colorado 80302
EMail: vjs@rhyolite.com
Intellectual Property Statement
The IETF takes no position regarding the validity or scope of any
intellectual property or other rights that might be claimed to
pertain to the implementation or use of the technology described in
this document or the extent to which any license under such rights
might or might not be available; neither does it represent that it
has made any effort to identify any such rights. Information on the
IETF's procedures with respect to rights in standards-track and
standards-related documentation can be found in BCP-11. Copies of
claims of rights made available for publication and any assurances of
licenses to be made available, or the result of an attempt made to
obtain a general license or permission for the use of such
proprietary rights by implementors or users of this specification can
be obtained from the IETF Secretariat.
The IETF invites any interested party to bring to its attention any
copyrights, patents or patent applications, or other proprietary
rights which may cover technology that may be required to practice
this standard. Please address the information to the IETF Executive
Director.
Full Copyright Statement
Copyright (C) The Internet Society (2003). All Rights Reserved.
This document and translations of it may be copied and furnished to
others, and derivative works that comment on or otherwise explain it
or assist in its implementation may be prepared, copied, published
and distributed, in whole or in part, without restriction of any
kind, provided that the above copyright notice and this paragraph are
included on all such copies and derivative works. However, this
document itself may not be modified in any way, such as by removing
the copyright notice or references to the Internet Society or other
Internet organizations, except as needed for the purpose of
developing Internet standards in which case the procedures for
copyrights defined in the Internet Standards process must be
followed, or as required to translate it into languages other than
English.
The limited permissions granted above are perpetual and will not be
revoked by the Internet Society or its successors or assignees.
This document and the information contained herein is provided on an
"AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING
TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION
Html markup produced by rfcmarkup 1.129d, available from
https://tools.ietf.org/tools/rfcmarkup/