[Docs] [txt|pdf|xml|html] [Tracker] [Email] [Diff1] [Diff2] [Nits]

Versions: 00 01 02 03 04

MMUSIC Working Group                                            V. Singh
Internet-Draft                                                    J. Ott
Intended status: Experimental                              T. Karkkainen
Expires: April 3, 2015                                  Aalto University
                                                             R. Globisch
                                                              T. Schierl
                                                          Fraunhofer HHI
                                                      September 30, 2014


    Multipath RTP (MPRTP) attribute in Session Description Protocol
               draft-singh-mmusic-mprtp-sdp-extension-04

Abstract

   Multipath RTP (MPRTP) is an extension to the Real-time Transport
   Protocol (RTP) that allows multi-homed endpoints to take advantage of
   the availability of multiple Internet paths between endpoints to send
   /receive media packets.  This document describes how to express the
   interface advertisement and negotiation during session setup in SDP
   (Session Description Protocol).

Status of This Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at http://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on April 3, 2015.

Copyright Notice

   Copyright (c) 2014 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents



Singh, et al.             Expires April 3, 2015                 [Page 1]


Internet-Draft            Multipath RTP in SDP            September 2014


   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   3
     1.1.  Requirements Language . . . . . . . . . . . . . . . . . .   3
     1.2.  Terminology . . . . . . . . . . . . . . . . . . . . . . .   3
   2.  SDP Considerations  . . . . . . . . . . . . . . . . . . . . .   3
     2.1.  MPRTP Interface Advertisement in SDP (out-of-band
           signaling)  . . . . . . . . . . . . . . . . . . . . . . .   4
       2.1.1.  "interface" attribute . . . . . . . . . . . . . . . .   4
       2.1.2.  Example . . . . . . . . . . . . . . . . . . . . . . .   5
     2.2.  MPRTP with ICE  . . . . . . . . . . . . . . . . . . . . .   5
     2.3.  Offer/Answer  . . . . . . . . . . . . . . . . . . . . . .   6
       2.3.1.  In-band Signaling Example . . . . . . . . . . . . . .   7
       2.3.2.  Out-of-band Signaling Example . . . . . . . . . . . .   7
         2.3.2.1.  Without ICE . . . . . . . . . . . . . . . . . . .   8
         2.3.2.2.  With ICE  . . . . . . . . . . . . . . . . . . . .   8
     2.4.  Increased Throughput  . . . . . . . . . . . . . . . . . .  10
     2.5.  Increased Reliability . . . . . . . . . . . . . . . . . .  10
     2.6.  Decoding dependency . . . . . . . . . . . . . . . . . . .  10
   3.  MPRTP in RTSP . . . . . . . . . . . . . . . . . . . . . . . .  10
     3.1.  Solution Overview without ICE . . . . . . . . . . . . . .  11
     3.2.  Solution Overview with ICE  . . . . . . . . . . . . . . .  13
     3.3.  RTSP Extensions . . . . . . . . . . . . . . . . . . . . .  15
       3.3.1.  MPRTP Interface Transport Header Parameter  . . . . .  15
       3.3.2.  MPRTP Feature Tag . . . . . . . . . . . . . . . . . .  16
       3.3.3.  Status Codes  . . . . . . . . . . . . . . . . . . . .  16
       3.3.4.  New Reason for PLAY_NOTIFY  . . . . . . . . . . . . .  16
       3.3.5.  Re-SETUP  . . . . . . . . . . . . . . . . . . . . . .  17
   4.  IANA Considerations . . . . . . . . . . . . . . . . . . . . .  17
     4.1.  SDP Attributes  . . . . . . . . . . . . . . . . . . . . .  18
       4.1.1.  "mprtp" attribute . . . . . . . . . . . . . . . . . .  18
     4.2.  RTSP  . . . . . . . . . . . . . . . . . . . . . . . . . .  18
       4.2.1.  RTSP Feature Tag  . . . . . . . . . . . . . . . . . .  18
       4.2.2.  RTSP Transport Parameters . . . . . . . . . . . . . .  18
       4.2.3.  Notify-Reason value . . . . . . . . . . . . . . . . .  18
   5.  Security Considerations . . . . . . . . . . . . . . . . . . .  19
   6.  Acknowledgements  . . . . . . . . . . . . . . . . . . . . . .  19
   7.  Contributors  . . . . . . . . . . . . . . . . . . . . . . . .  19
   8.  References  . . . . . . . . . . . . . . . . . . . . . . . . .  19
     8.1.  Normative References  . . . . . . . . . . . . . . . . . .  19
     8.2.  Informative References  . . . . . . . . . . . . . . . . .  20
   Appendix A.  Change Log . . . . . . . . . . . . . . . . . . . . .  21



Singh, et al.             Expires April 3, 2015                 [Page 2]


Internet-Draft            Multipath RTP in SDP            September 2014


     A.1.  Changes in draft-singh-mmusic-mprtp-sdp-extension-03  . .  21
     A.2.  Changes in draft-singh-mmusic-mprtp-sdp-extension-02  . .  21
     A.3.  Changes in draft-singh-mmusic-mprtp-sdp-extension-01  . .  21
     A.4.  Changes in draft-singh-mmusic-mprtp-sdp-extension-00  . .  21
   Authors' Addresses  . . . . . . . . . . . . . . . . . . . . . . .  22

1.  Introduction

   Multipath RTP (MPRTP) [I-D.singh-avtcore-mprtp] is an extension to
   RTP [RFC3550] that allows splitting a single RTP stream into multiple
   subflows, which are then transmitted over different Internet paths.
   Multipath RTCP (MPRTCP) [I-D.singh-avtcore-mprtp] is an extension to
   RTCP.  It is used along with MPRTP to report per-path sender and
   receiver characteristics.

   A Multipath RTP session can be set up in many possible ways e.g.,
   during handshake, or upgraded mid-session.  The capability exchange
   may be done using out-of-band signaling (e.g., Session Description
   Protocol (SDP) [RFC3264] in Session Initiation Protocol (SIP)
   [RFC3261], Real-Time Streaming Protocol (RTSP)
   [I-D.ietf-mmusic-rfc2326bis]) or using in-band signaling (e.g., in
   RTCP [I-D.singh-avtcore-mprtp]).

   This document defines an extension to the SDP attribute 'a=mprtp'
   defined in the base MPRTP specification [I-D.singh-avtcore-mprtp].
   Using this extension an endpoint can advertise its multiple
   interfaces.

1.1.  Requirements Language

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in [RFC2119].

1.2.  Terminology

   The definitions for the words Endpoint, Interface, Path and Subflow
   in this document are as per [I-D.singh-avtcore-mprtp].

2.  SDP Considerations

   The base Multipath RTP specification [I-D.singh-avtcore-mprtp]
   defines the 'a=mprtp' attribute to indicate support for MPRTP.  In
   the following section, we extend the 'a=mprtp' attribute to advertise
   an endpoint's multiple interfaces in SDP instead of advertising the
   interfaces in-band in RTCP [I-D.singh-avtcore-mprtp].





Singh, et al.             Expires April 3, 2015                 [Page 3]


Internet-Draft            Multipath RTP in SDP            September 2014


2.1.  MPRTP Interface Advertisement in SDP (out-of-band signaling)

   If the endpoint is aware of its multiple interfaces and wants to use
   them for MPRTP, it MAY use SDP to advertise these interfaces.
   Alternatively, it MAY use in-band signaling to advertise its
   interfaces, as defined in [I-D.singh-avtcore-mprtp].  The receiving
   endpoint MUST use the same mechanism to respond to an interface
   advertisement.  In particular, if an endpoint receives an SDP
   containing multiple MPRTP interfaces, then it MUST respond to the
   offer in SDP with its set of MPRTP interfaces.

2.1.1.  "interface" attribute

   The interface attribute is an optional media-level attribute and is
   used to advertise an endpoint's interface address.

   The syntax of the interface attribute is defined using the following
   Augmented BNF, as defined in [RFC5234].  The definitions of unicast-
   address, port, token, SP, and CRLF are according to RFC4566
   [RFC4566].

       mprtp-optional-parameter = mprtp-interface
                      ; other optional parameters may be added later

       mprtp-interface = "interface" ":" counter SP unicast-address
                           ":" rtp_port
                            *(SP interface-description-extension)

       counter = 1*DIGIT
       rtp_port = port    ;port from RFC4566

   <mprtp-interface>: specifies one unicast IP address, the RTP port
   number of the endpoint (MPRTP [I-D.singh-avtcore-mprtp] uses RTP/RTCP
   port multiplexing).  The unicast address with lowest counter value
   MUST match the connection address ('c=' line).  Similarly, the RTP
   and RTCP ports MUST match the RTP and RTCP ports in the associated
   'm=' line.  The counter SHOULD start at 1 and increment with each
   additional interface.  Multiple interface lines MUST be ordered in a
   decreasing priority level as is the case with the Interface
   Advertisement blocks in in-band signaling (See
   [I-D.singh-avtcore-mprtp]).

   <unicast-address>: is taken from RFC4566 [RFC4566].  It is one of the
   IP addresses of the endpoint and allows the use of IPv4 addresses,
   IPv6 addresses and Fully Qualified Domain Names (FQDN).  When
   choosing IPv6 addresses the endpoint MUST perform the IPv6 address
   prioritization and selection as proposed in
   [I-D.keranen-mmusic-ice-address-selection].



Singh, et al.             Expires April 3, 2015                 [Page 4]


Internet-Draft            Multipath RTP in SDP            September 2014


   <port>: is from RFC4566 [RFC4566].  It is the RTP port associated
   with the unicast address and note that the RTP and RTCP ports are
   multiplexed for MPRTP subflows according to [RFC5761].

   <counter>: is a monotonically increasing positive integer starting at
   1.  The counter MUST reset for each media line.  The counter value
   for an 'mprtp-interface' should remain the same for the session,
   unless the priorities of the interfaces change.

   [Editor's note: do we need a counter?]

   The 'mprtp-interface' can be extended using the 'interface-
   description-extension' parameter.  An endpoint MUST ignore any
   extensions it does not understand.

2.1.2.  Example

   The ABNF grammar is illustrated by means of an example:

   v=0
   o=alice 2890844526 2890844527 IN IP4 192.0.2.1
   s=
   c=IN IP4 192.0.2.1
   t=0 0
   m=video 49170 RTP/AVP 98
   a=rtpmap:98 H264/90000
   a=fmtp:98 profile-level-id=42A01E;
   a=extmap:1 urn:ietf:params:rtp-hdrext:mprtp
   a=rtcp-mux
   a=mprtp interface:1 192.0.2.1:49170    ;primary interface
   a=mprtp interface:2 198.51.100.1:51372    ;additional interface

2.2.  MPRTP with ICE

   If the endpoints intend to use ICE [RFC5245] for discovering
   interfaces and running connectivity checks, the following two step
   procedure MUST be followed:

   1.  Advertise ICE candidates: in the initial OFFER the endpoints
       exchange candidates, as defined in ICE [RFC5245].  Thereafter the
       endpoints run connectivity checks.

   2.  Advertise MPRTP interfaces: When a sufficient number of
       connectivity checks succeed, the endpoint MUST send an updated
       offer containing the interfaces that they want to use for MPRTP.

   When an endpoint uses ICE's regular nomination [RFC5245] procedure,
   it chooses the best ICE candidate as the default path.  In the case



Singh, et al.             Expires April 3, 2015                 [Page 5]


Internet-Draft            Multipath RTP in SDP            September 2014


   of an MPRTP endpoint, if the connectivity check of more than one ICE
   candidate succeeded, then an MPRTP endpoint MAY advertise (some of)
   these as MPRTP interfaces in an updated offer.

   When an endpoint uses ICE's aggressive nomination [RFC5245]
   procedure, the selected candidate may change as more ICE checks
   complete.  Instead of sending updated offers as additional ICE
   candidates appear (transience), the endpoint MAY use in-band
   signaling to advertise its interfaces, as defined in
   [I-D.singh-avtcore-mprtp].  Additionally, it MAY send an updated
   offer when the transience stabilizes.

   If the default interface disappears and the paths used for MPRTP are
   different from the one in the c= and m= lines then the 'mprtp
   interface' with the lowest counter value should be promoted to the c=
   and m= lines in the updated offer.

   When a new interface appears, then the application/endpoint should
   internally decide if it wishes to use it and sends an updated offer
   with ICE candidates of the new interface.  The receiving endpoint
   responds to the offer with all its ICE candidates in the answer and
   starts connectivity checks between all its candidates and the
   offerer's new ICE candidate.  Similarly, the initiating endpoint
   starts connectivity checks between the new interface and all the
   received ICE candidates in the answer.  If the connectivity checks
   succeed, the initiating endpoint MAY send an updated offer with the
   new interface as an additional 'mprtp interface'.

   [Editor's Note: should we also consider using trickle ICE for MPRTP?
   Trickle ICE is introduced in: [I-D.ietf-mmusic-trickle-ice] and for
   SIP in [I-D.ivov-mmusic-trickle-ice-sip].]

2.3.  Offer/Answer

   When SDP [RFC4566] is used to negotiate MPRTP interfaces (see
   Section 2.1) following the offer/answer model [RFC3264], the
   collection of "a=mprtp interface" attribute lines indicates the
   interfaces the endpoint wishes to use for sending and/or receiving
   media data.  The SDP offer MUST include this attribute at the media
   level.  If the answerer wishes to also use SDP for advertising MPRTP
   interfaces, it MUST also include its interfaces at the media-level
   "a=mprtp interface" attribute in the answer.  If the answer does not
   contain an "a=mprtp interface" attribute, the offerer MUST use in-
   band signaling [I-D.singh-avtcore-mprtp] for advertising interfaces.

   When SDP is used in a declarative manner, the presence of an "a=mprtp
   interface" attribute signals that the sender can send or receive
   media data over multiple interfaces.  The receiver SHOULD be capable



Singh, et al.             Expires April 3, 2015                 [Page 6]


Internet-Draft            Multipath RTP in SDP            September 2014


   of streaming media to the multiple interfaces and be prepared to
   receive media from multiple interfaces.

   The following sections shows examples of SDP offer and answer for in-
   band and out-of-band signaling.

2.3.1.  In-band Signaling Example

   The following offer/answer shows that both the endpoints are MPRTP
   capable and SHOULD use in-band signaling for interfaces
   advertisements.

   Offer:
     v=0
     o=alice 2890844526 2890844527 IN IP4 192.0.2.1
     s=
     c=IN IP4 192.0.2.1
     t=0 0
     m=video 49170 RTP/AVP 98
     a=rtpmap:98 H264/90000
     a=fmtp:98 profile-level-id=42A01E;
     a=rtcp-mux
     a=mprtp

   Answer:
     v=0
     o=bob 2890844528 2890844529 IN IP4 192.0.2.2
     s=
     c=IN IP4 192.0.2.2
     t=0 0
     m=video 4000 RTP/AVP 98
     a=rtpmap:98 H264/90000
     a=fmtp:98 profile-level-id=42A01E;
     a=rtcp-mux
     a=mprtp

   The endpoint MAY now use in-band RTCP signaling to advertise its
   multiple interfaces.  Alternatively, it MAY make another offer with
   the interfaces in SDP (out-of-band signaling).

2.3.2.  Out-of-band Signaling Example

   If multiple interfaces are included in an SDP offer then the MPRTP-
   capable receiver MUST respond to the request with an SDP answer
   containing one or more interfaces.  If the SDP answer does not
   contain "a=mprtp", the offerer can conclude that the endpoint does
   not support MPRTP and continue the session using a single path.




Singh, et al.             Expires April 3, 2015                 [Page 7]


Internet-Draft            Multipath RTP in SDP            September 2014


2.3.2.1.  Without ICE

   In this example, the offerer advertises two interfaces and the
   answerer responds with a single interface description.  The endpoint
   MAY use one or both paths depending on the end-to-end characteristics
   of each path.

   Offer:
     v=0
     o=alice 2890844526 2890844527 IN IP4 192.0.2.1
     s=
     c=IN IP4 192.0.2.1
     t=0 0
     m=video 49170 RTP/AVP 98
     a=rtpmap:98 H264/90000
     a=fmtp:98 profile-level-id=42A01E;
     a=rtcp-mux
     a=mprtp interface:1 192.0.2.1:49170
     a=mprtp interface:2 198.51.100.1:51372

   Answer:
     v=0
     o=bob 2890844528 2890844529 IN IP4 192.0.2.2
     s=
     c=IN IP4 192.0.2.2
     t=0 0
     m=video 4000 RTP/AVP 98
     a=rtpmap:98 H264/90000
     a=fmtp:98 profile-level-id=42A01E;
     a=rtcp-mux
     a=mprtp interface:1 192.0.2.2:4000

2.3.2.2.  With ICE

   In this example, the endpoint first sends its ICE candidates in the
   initial offer and the other endpoint answers with its ICE candidates.

   Initial offer (with ICE candidates):













Singh, et al.             Expires April 3, 2015                 [Page 8]


Internet-Draft            Multipath RTP in SDP            September 2014


   Offer:
     v=0
     o=alice 2890844526 2890844527 IN IP4 192.0.2.1
     s=
     c=IN IP4 192.0.2.1
     t=0 0
     a=ice-pwd:asd88fgpdd777uzjYhagZg
     a=ice-ufrag:8hhY
     a=mprtp
     m=video 49170 RTP/AVP 98
     a=rtpmap:98 H264/90000
     a=fmtp:98 profile-level-id=42A01E;
     a=rtcp-mux
     a=candidate:1 1 UDP 2130706431 192.0.2.1 49170 typ host
     a=candidate:2 1 UDP 1694498815 198.51.100.1 51372 typ host

   Answer:
     v=0
     o=bob 2890844528 2890844529 IN IP4 192.0.2.2
     s=
     c=IN IP4 192.0.2.2
     t=0 0
     a=ice-pwd:YH75Fviy6338Vbrhrlp8Yh
     a=ice-ufrag:9uB6
     a=mprtp
     m=video 4000 RTP/AVP 98
     a=rtpmap:98 H264/90000
     a=fmtp:98 profile-level-id=42A01E;
     a=rtcp-mux
     a=candidate:1 1 UDP 2130706431 192.0.2.2 4000 typ host

   Thereafter, each endpoint conducts ICE connectivity checks and when
   sufficient number of connectivity checks succeed, the endpoint sends
   an updated offer.  In the updated offer, the endpoint advertises its
   multiple interfaces for MPRTP.

   Updated offer (with MPRTP interfaces):














Singh, et al.             Expires April 3, 2015                 [Page 9]


Internet-Draft            Multipath RTP in SDP            September 2014


   Offer:
     v=0
     o=alice 2890844526 2890844527 IN IP4 192.0.2.1
     s=
     c=IN IP4 192.0.2.1
     t=0 0
     m=video 49170 RTP/AVP 98
     a=rtpmap:98 H264/90000
     a=fmtp:98 profile-level-id=42A01E;
     a=rtcp-mux
     a=candidate:1 1 UDP 2130706431 192.0.2.1 49170 typ host
     a=candidate:2 1 UDP 1694498815 198.51.100.1 51372 typ host
     a=mprtp interface:1 192.0.2.1:49170
     a=mprtp interface:2 198.51.100.1:51372

   Answer:
     v=0
     o=bob 2890844528 2890844529 IN IP4 192.0.2.2
     s=
     c=IN IP4 192.0.2.2
     t=0 0
     m=video 4000 RTP/AVP 98
     a=rtpmap:98 H264/90000
     a=fmtp:98 profile-level-id=42A01E;
     a=rtcp-mux
     a=candidate:1 1 UDP 2130706431 192.0.2.2 4000 typ host
     a=mprtp interface:1 192.0.2.2:4000

2.4.  Increased Throughput

   The MPRTP layer MAY choose to augment paths to increase throughput.
   If the desired media rate exceeds the current media rate, the
   endpoints MUST renegotiate the application specific ("b=AS:xxx")
   [RFC4566] bandwidth.

2.5.  Increased Reliability

   TBD

2.6.  Decoding dependency

   TBD

3.  MPRTP in RTSP

   Endpoints MUST use RTSP 2.0 [I-D.ietf-mmusic-rfc2326bis] for session
   setup.  Endpoints MUST multiplex RTP and RTCP on a single port




Singh, et al.             Expires April 3, 2015                [Page 10]


Internet-Draft            Multipath RTP in SDP            September 2014


   [RFC5761] and follow the recommendations made in Appendix C of
   [I-D.ietf-mmusic-rfc2326bis].

3.1.  Solution Overview without ICE

   1.  The RTSP Server should include all of its interfaces via the SDP
       attribute ("a=mprtp interface") in the RTSP DESCRIBE message.

   2.  The RTSP Client should include its multiple interfaces in the
       RTSP SETUP message using the new attribute ("dest_mprtp_addr=")
       in the Transport header.

   3.  The RTSP Server responds to the RTSP SETUP message with a 200 OK
       containing its MPRTP interfaces (using the "src_mprtp_header=")
       in the Transport header.  After this, the RTSP Client can issue a
       PLAY request.

   4.  If a new interface appears or an existing one disappear at the
       RTSP Client during playback, it should send a new RTSP SETUP
       message containing the updated interfaces ("dest_mprtp_addr") in
       the Transport header.

   5.  If a new interface appears or an existing one disappears at the
       RTSP Server during playback, the RTSP Server should send a
       PLAY_NOTIFY message with a new Notify-Reason: "src-mprtp-
       interface-update".  The request must contain the updated
       interfaces ("dest_mprtp_addr") in the "MPRTP-Interfaces" header.

   6.  Alternatively, the RTSP Server or Client may use the RTCP (in-
       band) mechanism to advertise their interfaces.

   The overview is illustrated by means of an example:



















Singh, et al.             Expires April 3, 2015                [Page 11]


Internet-Draft            Multipath RTP in SDP            September 2014


       C->S: DESCRIBE rtsp://server.example.com/fizzle/foo RTSP/2.0
             CSeq: 111
             User-Agent: PhonyClient 1.3
             Accept: application/sdp, application/example
             Supported: setup.mprtp, setup.rtp.rtcp.mux

       S->C: RTSP/2.0 200 OK
             CSeq: 111
             Date: 23 Jan 2011 15:35:06 GMT
             Server: PhonyServer 1.3
             Content-Type: application/sdp
             Content-Length: 367
             Supported: setup.mprtp, setup.rtp.rtcp.mux

             v=0
             o=mprtp-rtsp-server 2890844526 2890844527 IN IP4 192.0.2.1
             s=
             c=IN IP4 192.0.2.1
             t=0 0
             m=video 49170 RTP/AVP 98
             a=rtpmap:98 H264/90000
             a=fmtp:98 profile-level-id=42A01E;
             a=extmap:1 urn:ietf:params:rtp-hdrext:mprtp
             a=rtcp-mux
             a=mprtp interface:1 192.0.2.1:49170
             a=mprtp interface:2 198.51.100.1:51372

   On receiving the response to the RTSP DESCRIBE message, the RTSP
   Client sends an RTSP SETUP message containing its MPRTP interfaces in
   the Transport header using the "dest_mprtp_addr=" attribute.  The
   RTSP Server responds with a 200 OK containing both the RTSP Client's
   and the RTSP Server's MPRTP interfaces.



















Singh, et al.             Expires April 3, 2015                [Page 12]


Internet-Draft            Multipath RTP in SDP            September 2014


       C->S: SETUP rtsp://server.example.com/fizzle/foo/audio RTSP/2.0
             CSeq: 112
             Transport: RTP/AVPF/UDP; unicast; dest_mprtp_addr="
             1 192.0.2.2 4000"; RTCP-mux,
             RTP/AVP/UDP; unicast; dest_addr=":6970"/":6971",
             RTP/AVP/TCP;unicast;interleaved=0-1
             Accept-Ranges: NPT, UTC
             User-Agent: PhonyClient 1.3
             Supported: setup.mprtp, setup.rtp.rtcp.mux

       S->C: RTSP/2.0 200 OK
             CSeq: 112
             Session: 12345678
             Transport: RTP/AVPF/UDP; unicast; dest_mprtp_addr="
             1 192.0.2.2 4000";
             src_mprtp_addr="1 192.0.2.1 49170;
             2 198.51.100.1 51372"; RTCP-mux
             Accept-Ranges: NPT
             Date: 23 Jan 2012 15:35:06 GMT
             Server: PhonyServer 1.3
             Supported: setup.mprtp, setup.rtp.rtcp.mux

   The RTSP Client can issue a PLAY request on receiving the 200 OK and
   media can start to stream once the RTSP Server receives the PLAY
   request.

3.2.  Solution Overview with ICE

   This overview uses the ICE mechanisms [I-D.ietf-mmusic-rtsp-nat]
   defined for RTSP 2.0 [I-D.ietf-mmusic-rfc2326bis].

   1.  The RTSP Server should include the "a=rtsp-ice-d-m" attribute and
       also indicate that it supports MPRTP by including the "a=mprtp"
       attribute in the SDP of the RTSP DESCRIBE message.

   2.  The client sends an RTSP SETUP message containing the D-ICE in
       lower level transport and ICE candidates in the Transport header.
       The RTSP Server and Client then follow the procedures (Steps 2 to
       8) described in [I-D.ietf-mmusic-rtsp-nat].

   3.  When the connectivity checks conclude, the RTSP Client can send
       an updated RTSP SETUP message with its MPRTP interfaces (ICE
       candidates that were successful) in the Transport header
       ("dest_mprtp_addr=").  The RTSP Server responds to the RTSP SETUP
       message with a 200 OK containing its MPRTP interfaces (ICE
       candidates that were successful) in the Transport header
       ("src_mprtp_header=").  After receiving the 200 OK, the RTSP
       Client can issue the PLAY request.



Singh, et al.             Expires April 3, 2015                [Page 13]


Internet-Draft            Multipath RTP in SDP            September 2014


   4.  Alternatively, after the connectivity checks conclude, the RTSP
       Client can issue the PLAY request (Step 9 and 10 of
       [I-D.ietf-mmusic-rtsp-nat]) and the endpoints can use the RTCP
       (in-band) mechanism to advertise their interfaces.

   5.  If a new interface appears or an existing one disappears, the
       RTSP Client should issue an updated SETUP message with the new
       candidates (See Section 5.12 of [I-D.ietf-mmusic-rtsp-nat]) or
       the RTSP Server should send a PLAY_NOTIFY message (See
       Section 5.13 of [I-D.ietf-mmusic-rtsp-nat]).  After connectivity
       checks succeed for the new interfaces, the RTSP Client can
       proceed with the instructions in Step 3 or 4.

   The overview is illustrated by means of an example:

       C->S: DESCRIBE rtsp://server.example.com/foo RTSP/2.0
             CSeq: 312
             User-Agent: PhonyClient 1.3
             Accept: application/sdp, application/example
             Supported: setup.mprtp, setup.ice-d-m, setup.rtp.rtcp.mux

       S->C: RTSP/2.0 200 OK
             CSeq: 312
             Date: 23 Jan 2012 15:35:06 GMT
             Server: PhonyServer 1.3
             Content-Type: application/sdp
             Content-Length: 367
             Supported: setup.mprtp, setup.ice-d-m, setup.rtp.rtcp.mux

             v=0
             o=mprtp-rtsp-server 2890844526 2890842807 IN IP4 192.0.2.1
             s=SDP Seminar
             i=A Seminar on the session description protocol
             u=http://www.example.com/lectures/sdp.ps
             e=seminar@example.com (Seminar Management)
             t=2873397496 2873404696
             a=recvonly
             a=rtsp-ice-d-m
             a=control: *
             m=video 49170 RTP/AVP 98
             a=rtpmap:98 H264/90000
             a=fmtp:98 profile-level-id=42A01E;
             a=rtcp-mux
             a=mprtp
             a=control: /video






Singh, et al.             Expires April 3, 2015                [Page 14]


Internet-Draft            Multipath RTP in SDP            September 2014


        C->S: SETUP rtsp://server.example.com/foo/video RTSP/2.0
              CSeq: 302
              Transport: RTP/AVP/D-ICE; unicast; ICE-ufrag=9uB6;
                    ICE-Password=YH75Fviy6338Vbrhrlp8Yh;
                    candidates="1 1 UDP 2130706431 192.0.2.2
                    4000 typ host"; RTCP-mux,
                    RTP/AVP/UDP; unicast; dest_addr=":6970"/":6971",
                    RTP/AVP/TCP;unicast;interleaved=0-1
              Accept-Ranges: NPT, UTC
              User-Agent: PhonyClient 1.3
              Supported: setup.mprtp, setup.ice-d-m, setup.rtp.rtcp.mux

        S->C: RTSP/2.0 200 OK
              CSeq: 302
              Session: 12345678
              Transport: RTP/AVP/D-ICE; unicast; RTCP-mux;
                    ICE-ufrag=8hhY; ICE-Password=
                    asd88fgpdd777uzjYhagZg; candidates="
                    1 1 UDP 2130706431 192.0.2.1 49170 typ host;
                    2 1 UDP 1694498815 198.51.100.1 51372 typ host"
              Accept-Ranges: NPT
              Date: 23 Jan 2012 15:35:06 GMT
              Server: PhonyServer 1.3
              Supported: setup.mprtp, setup.ice-d-m, setup.rtp.rtcp.mux

   After the connectivity checks complete, the RTSP Client can send an
   updated RTSP SETUP message containing the MPRTP interfaces for which
   the connectivity checks were successful.  These steps are the same as
   the ones in the previous example.

3.3.  RTSP Extensions

3.3.1.  MPRTP Interface Transport Header Parameter

   This section defines a new RTSP Transport parameter for carrying
   MPRTP interfaces.  The transport parameters may only occur once in
   each transport specification.  The parameter can contain one or more
   MPRTP interfaces.  If the RTSP Server supports MPRTP it MUST include
   one or more MPRTP interfaces in the SETUP response.












Singh, et al.             Expires April 3, 2015                [Page 15]


Internet-Draft            Multipath RTP in SDP            September 2014


          trns-parameter = <Defined in Section 20.2.3 of
                                [I-D.ietf-mmusic-rfc2326bis]>
          trns-parameter =/ SEMI dest-mprtp-interface-par
          trns-parameter =/ SEMI src-mprtp-interface-par
          dest-mprtp-interface-par = "dest_mprtp_addr" EQUAL DQUOTE SWS
                                  interface *(SEMI interface) SWS DQUOTE
          src-mprtp-interface-par = "src_mprtp_addr" EQUAL DQUOTE SWS
                                  interface *(SEMI interface) SWS DQUOTE

          interface  = counter SP
                       unicast-address SP
                       rtp_port SP
                       *(SP interface-description-extension)

           counter         = See section 2.3.1
           unicast-address = See section 2.3.1
           rtp_port        = See section 2.3.1
           interface-description-extension = See section 2.3.1
           EQUAL           = <Defined in [I-D.ietf-mmusic-rfc2326bis]>
           DQUOTE          = <Defined in [I-D.ietf-mmusic-rfc2326bis]>
           SWS             = <Defined in [I-D.ietf-mmusic-rfc2326bis]>
           SEMI            = <Defined in [I-D.ietf-mmusic-rfc2326bis]>

3.3.2.  MPRTP Feature Tag

   A feature tag is defined for indicating MPRTP support in the RTSP
   capabilities mechanism: "setup.mprtp".  This feature tag indicates
   that the endpoint supports all the mandatory extensions defined in
   this specification and is applicable to all types of RTSP agents;
   clients, servers and proxies.

   The MPRTP compliant RTSP Client MUST send the feature tag
   "setup.mprtp" in the "Supported" header of all DESCRIBE and SETUP
   requests.

3.3.3.  Status Codes

   TBD

3.3.4.  New Reason for PLAY_NOTIFY

   A new value used in the PLAY_NOTIFY methods Notify-Reason header is
   defined: "src-mprtp-interface-update".  This reason indicates that
   the RTSP Server has updated set of MPRTP interfaces.

               Notify-Reas-val =/ "src-mprtp-interface-update"





Singh, et al.             Expires April 3, 2015                [Page 16]


Internet-Draft            Multipath RTP in SDP            September 2014


   PLAY_NOTIFY requests with Notify-Reason header set to src-mprtp-
   interface-update MUST include a mprtp-interfaces header.

         mprtp-interfaces        =  "mprtp-interfaces" HCOLON interface
                              *(COMMA interface)
         interface  = counter SP
                      unicast-address SP
                      rtp_port SP
                      *(SP interface-description-extension)

          counter         = See section 2.3.1
          unicast-address = See section 2.3.1
          rtp_port        = See section 2.3.1
          interface-description-extension = See section 2.3.1

   Example:

       S->C: PLAY_NOTIFY rtsp://server.example.com/foo RTSP/2.0
             CSeq: 305
             Notify-Reason: src-mprtp-interface-update
             Session: 12345678
             mprtp-interfaces: 2 192.0.2.10 48211, 3 198.51.100.11 38703
             Server: PhonyServer 1.3

       C->S: RTSP/2.0 200 OK
             CSeq: 305
             User-Agent: PhonyClient 1.3

3.3.5.  Re-SETUP

   The server SHALL support SETUP requests in PLAYING state if it is
   only updating the transport parameter (dest_mprtp_addr).  If the
   session is established using ICE then the RTSP Server and Client MUST
   also follow the procedures described for Re-SETUP in
   [I-D.ietf-mmusic-rtsp-nat].

4.  IANA Considerations

   The following contact information shall be used for all registrations
   in this document:

       Contact:    Varun Singh
                   mailto:varun.singh@iki.fi
                   tel:+358-9-470-24785

   Note to the RFC-Editor: When publishing this document as an RFC,
   please replace "RFC XXXX" with the actual RFC number of this document
   and delete this sentence.



Singh, et al.             Expires April 3, 2015                [Page 17]


Internet-Draft            Multipath RTP in SDP            September 2014


4.1.  SDP Attributes

4.1.1.  "mprtp" attribute

   o  Attribute Name: MPRTP

   o  Long Form: Multipath RTP

   o  Type of Attribute: media-level

   o  Charset Considerations: The attribute is not subject to the
      charset attribute.

   o  Purpose: This attribute is extended to signal one of many possible
      interfaces for communication.  These interface addresses may have
      been validated using ICE procedures.

   o  Appropriate Values: Section 2.1.1 of RFC XXXX.

4.2.  RTSP

   This document requests registration in a number of registries for
   RTSP.

4.2.1.  RTSP Feature Tag

   This document request that one RTSP 2.0 feature tag be registered in
   the "RTSP 2.0 feature tag" registry:

   setup.mprtp See Section 3.3.2.

4.2.2.  RTSP Transport Parameters

   This document requests that 2 transport parameters be registered in
   RTSP 2.0's "Transport Parameters":

   "dest_mprtp_addr": See Section 3.3.1.

   "src_mprtp_addr": See Section 3.3.1.

4.2.3.  Notify-Reason value

   This document requests that one assignment be done in the RTSP 2.0
   Notify-Reason header value registry.  The defined value is:

   "src-mprtp-interface-update": See Section 3.3.4.





Singh, et al.             Expires April 3, 2015                [Page 18]


Internet-Draft            Multipath RTP in SDP            September 2014


5.  Security Considerations

   All drafts are required to have a security considerations section.
   See RFC 3552 [RFC3552] for a guide.

6.  Acknowledgements

   Varun Singh, Saba Ahsan, and Teemu Karkkainen are supported by
   Trilogy (http://www.trilogy-project.org), a research project
   (ICT-216372) partially funded by the European Community under its
   Seventh Framework Program.

   The work of Varun Singh, Joerg Ott, Ralf Globisch and Thomas Schierl
   has been partially supported by the European Institute of Innovation
   and Technology (EIT) ICT Labs activity RCLD 11882.

   The views expressed here are those of the author(s) only.  Neither
   the European Commission nor the EITICT labs is liable for any use
   that may be made of the information in this document.

7.  Contributors

   Saba Ahsan
   Aalto University
   School of Science and Technology
   Otakaari 5 A
   Espoo, FIN  02150
   Finland

   Email: sahsan@cc.hut.fi

   Lars Eggert
   NetApp
   Sonnenallee 1
   Kirchheim  85551
   Germany

   Phone: +49 151 12055791
   Email: lars@netapp.com
   URI:   http://eggert.org/

8.  References

8.1.  Normative References







Singh, et al.             Expires April 3, 2015                [Page 19]


Internet-Draft            Multipath RTP in SDP            September 2014


   [I-D.keranen-mmusic-ice-address-selection]
              Keraenen, A. and J. Arkko, "Update on Candidate Address
              Selection for Interactive Connectivity Establishment
              (ICE)", draft-keranen-mmusic-ice-address-selection-01
              (work in progress), July 2012.

   [I-D.singh-avtcore-mprtp]
              Singh, V., Karkkainen, T., Ott, J., Ahsan, S., and L.
              Eggert, "Multipath RTP (MPRTP)", draft-singh-avtcore-
              mprtp-09 (work in progress), June 2014.

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119, March 1997.

   [RFC3550]  Schulzrinne, H., Casner, S., Frederick, R., and V.
              Jacobson, "RTP: A Transport Protocol for Real-Time
              Applications", STD 64, RFC 3550, July 2003.

   [RFC5234]  Crocker, D. and P. Overell, "Augmented BNF for Syntax
              Specifications: ABNF", STD 68, RFC 5234, January 2008.

   [RFC5245]  Rosenberg, J., "Interactive Connectivity Establishment
              (ICE): A Protocol for Network Address Translator (NAT)
              Traversal for Offer/Answer Protocols", RFC 5245, April
              2010.

   [RFC5761]  Perkins, C. and M. Westerlund, "Multiplexing RTP Data and
              Control Packets on a Single Port", RFC 5761, April 2010.

8.2.  Informative References

   [I-D.ietf-mmusic-rfc2326bis]
              Schulzrinne, H., Rao, A., Lanphier, R., Westerlund, M.,
              and M. Stiemerling, "Real Time Streaming Protocol 2.0
              (RTSP)", draft-ietf-mmusic-rfc2326bis-40 (work in
              progress), February 2014.

   [I-D.ietf-mmusic-rtsp-nat]
              Goldberg, J., Westerlund, M., and T. Zeng, "A Network
              Address Translator (NAT) Traversal Mechanism for Media
              Controlled by Real-Time Streaming Protocol (RTSP)", draft-
              ietf-mmusic-rtsp-nat-22 (work in progress), July 2014.

   [I-D.ietf-mmusic-trickle-ice]
              Ivov, E., Rescorla, E., and J. Uberti, "Trickle ICE:
              Incremental Provisioning of Candidates for the Interactive
              Connectivity Establishment (ICE) Protocol", draft-ietf-
              mmusic-trickle-ice-01 (work in progress), February 2014.



Singh, et al.             Expires April 3, 2015                [Page 20]


Internet-Draft            Multipath RTP in SDP            September 2014


   [I-D.ivov-mmusic-trickle-ice-sip]
              Ivov, E., Marocco, E., and C. Holmberg, "A Session
              Initiation Protocol (SIP) usage for Trickle ICE", draft-
              ivov-mmusic-trickle-ice-sip-02 (work in progress), June
              2014.

   [RFC3261]  Rosenberg, J., Schulzrinne, H., Camarillo, G., Johnston,
              A., Peterson, J., Sparks, R., Handley, M., and E.
              Schooler, "SIP: Session Initiation Protocol", RFC 3261,
              June 2002.

   [RFC3264]  Rosenberg, J. and H. Schulzrinne, "An Offer/Answer Model
              with Session Description Protocol (SDP)", RFC 3264, June
              2002.

   [RFC3552]  Rescorla, E. and B. Korver, "Guidelines for Writing RFC
              Text on Security Considerations", BCP 72, RFC 3552, July
              2003.

   [RFC4566]  Handley, M., Jacobson, V., and C. Perkins, "SDP: Session
              Description Protocol", RFC 4566, July 2006.

Appendix A.  Change Log

   Note to the RFC-Editor: please remove this section prior to
   publication as an RFC.

A.1.  Changes in draft-singh-mmusic-mprtp-sdp-extension-03

   o  Minor changes, updated refs.

A.2.  Changes in draft-singh-mmusic-mprtp-sdp-extension-02

   o  Mainly editorial fixes.

   o  Changed DQ to DQUOTE in ABNF definition.

A.3.  Changes in draft-singh-mmusic-mprtp-sdp-extension-01

   o  Added IPv6 address selection.

   o  Editorial fixes.

A.4.  Changes in draft-singh-mmusic-mprtp-sdp-extension-00

   o  The document is created by splitting the draft-singh-avtcore-
      mprtp-04 into 2 parts.  The RTP related stuff is kept in the




Singh, et al.             Expires April 3, 2015                [Page 21]


Internet-Draft            Multipath RTP in SDP            September 2014


      former while the SDP related discussion is moved to this new
      document.

Authors' Addresses

   Varun Singh
   Aalto University
   School of Electrical Engineering
   Otakaari 5 A
   Espoo, FIN  02150
   Finland

   Email: varun@comnet.tkk.fi
   URI:   http://www.netlab.tkk.fi/~varun/


   Joerg Ott
   Aalto University
   School of Electrical Engineering
   Otakaari 5 A
   Espoo, FIN  02150
   Finland

   Email: jo@comnet.tkk.fi


   Teemu Karkkainen
   Aalto University
   School of Electrical Engineering
   Otakaari 5 A
   Espoo, FIN  02150
   Finland

   Email: teemuk@comnet.tkk.fi


   Ralf Globisch
   Fraunhofer HHI
   Einsteinufer 37
   Berlin  D-10587
   Germany

   Email: ralf.globisch@gmail.com








Singh, et al.             Expires April 3, 2015                [Page 22]


Internet-Draft            Multipath RTP in SDP            September 2014


   Thomas Schierl
   Fraunhofer HHI
   Einsteinufer 37
   Berlin  D-10587
   Germany

   Phone: +49-30-31002-227
   Email: ts@thomas-schierl.de











































Singh, et al.             Expires April 3, 2015                [Page 23]


Html markup produced by rfcmarkup 1.120, available from https://tools.ietf.org/tools/rfcmarkup/