[Docs] [txt|pdf|xml|html] [Tracker] [Email] [Diff1] [Diff2] [Nits]

Versions: 00 01 02 03 04 05 06 07 08 09 10 11 12

Network Working Group                                           J. Snell
Internet-Draft                                          October 22, 2007
Intended status: Experimental
Expires: April 24, 2008


               Atom Publishing Protocol Feature Discovery
                   draft-snell-atompub-feature-11.txt

Status of this Memo

   By submitting this Internet-Draft, each author represents that any
   applicable patent or other IPR claims of which he or she is aware
   have been or will be disclosed, and any of which he or she becomes
   aware will be disclosed, in accordance with Section 6 of BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF), its areas, and its working groups.  Note that
   other groups may also distribute working documents as Internet-
   Drafts.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   The list of current Internet-Drafts can be accessed at
   http://www.ietf.org/ietf/1id-abstracts.txt.

   The list of Internet-Draft Shadow Directories can be accessed at
   http://www.ietf.org/shadow.html.

   This Internet-Draft will expire on April 24, 2008.

Copyright Notice

   Copyright (C) The IETF Trust (2007).

Abstract

   This document introduces extensions to the Atom Publishing Protocol
   Service Document format for expressing metadata about the behaviors,
   functions and capabilities supported by an Atom Publishing Protocol
   collection.







Snell                    Expires April 24, 2008                 [Page 1]


Internet-Draft              Atompub Features                October 2007


Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . . . 3
   2.  Notational Conventions  . . . . . . . . . . . . . . . . . . . . 3
   3.  The f:feature element . . . . . . . . . . . . . . . . . . . . . 4
     3.1.  Example . . . . . . . . . . . . . . . . . . . . . . . . . . 5
   4.  The "supportsDraft" Feature . . . . . . . . . . . . . . . . . . 6
   5.  The "ignoresDraft" Feature  . . . . . . . . . . . . . . . . . . 6
   6.  Security Considerations . . . . . . . . . . . . . . . . . . . . 6
   7.  IANA Considerations . . . . . . . . . . . . . . . . . . . . . . 6
   8.  Normative References  . . . . . . . . . . . . . . . . . . . . . 6
   Appendix A.  Acknowledgements . . . . . . . . . . . . . . . . . . . 7
   Author's Address  . . . . . . . . . . . . . . . . . . . . . . . . . 7
   Intellectual Property and Copyright Statements  . . . . . . . . . . 8





































Snell                    Expires April 24, 2008                 [Page 2]


Internet-Draft              Atompub Features                October 2007


1.  Introduction

   This document introduces an extension to the Atom Publishing Protocol
   (Atompub) service document [RFC5023] format that allows for the
   documentation and discovery of behaviors, functions or capabilities
   supported by an Atompub collection.  Examples of such capabilities
   can include the preservation of certain kinds of content, support for
   draft entries, support for the scheduled publication of entries, use
   of a particular set of Atom format extensions, and so on.

   Describing features using the mechanisms defined in this
   specification is currently considered to be largely experimental.
   While there are examples of such mechanisms being put to practical
   use in deployed applications, there is currently not enough
   collective implementation experience to determine whether the
   mechanism defined here is sufficient to fully address the general
   needs of Atom Publishing Protocol client and server implementations.
   Implementations and feedback are encouraged.


2.  Notational Conventions

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in BCP 14, [RFC2119].

   This specification uses XML Namespaces [W3C.REC-xml-names-20060816]
   to uniquely identify XML element names.  It uses the following
   namespace prefix for the indicated namespace URI;

     "f": "http://purl.org/atompub/features/1.0"

   This specification uses terms from the XML Infoset
   [W3C.REC-xml-infoset-20040204].  However, this specification uses a
   shorthand; the phrase "Information Item" is omitted when naming
   Element Information Items.  Therefore, when this specification uses
   the terms "element" and "attribute" it is referring, respectively, to
   the Element and Attribute Information Items in Infoset terms.

   This specification uses the terms "atomUri" and
   "atomCommonAttributes" from the non-normative RELAX NG Compact schema
   included in [RFC4287].  Where used, these serve the same purpose and
   have the same meaning as their use in [RFC4287].

   Atom allows the use of IRIs [RFC3987].  Every URI [RFC3986] is also
   an IRI, so a URI may be used wherever below an IRI is named.  There
   are two special considerations: (1) when an IRI that is not also a
   URI is given for dereferencing, it MUST be mapped to a URI using the



Snell                    Expires April 24, 2008                 [Page 3]


Internet-Draft              Atompub Features                October 2007


   steps in Section 3.1 of [RFC3987] and (2) when an IRI is serving as
   an identifier, it MUST NOT be so mapped.

   Any element defined by this specification MAY have an xml:base
   attribute [W3C.REC-xmlbase-20010627].  When xml:base is used, it
   serves the function described in section 5.1.1 of [RFC3986],
   establishing the base URI (or IRI) for resolving any relative
   references found within the effective scope of the xml:base
   attribute.

   Any element defined by this specification MAY have an xml:lang
   attribute, whose content indicates the natural language for the
   element and its descendents.  The language context is only
   significant for elements and attributes declared to be "Language-
   Sensitive".  Requirements regarding the content and interpretation of
   xml:lang are specified in XML 1.0 [W3C.REC-xml-20060816], Section
   2.12.


3.  The f:feature element

   The f:feature element is used in an app:collection element to declare
   the collection's support for a feature.

     namespace f = "http://purl.org/atompub/features/1.0"

     feature = element f:feature {
       atomCommonAttributes,
       attribute ref    { atomUri },
       attribute href   { atomUri }?,
       attribute label  { text }?,
       (anyElement)*
     }

     anyElement = element * - f:feature {
       (attribute * { text }
         | text
         | anyElement)*
     }

   The ref attribute specifies a globally unique IRI identifying a
   feature.  The value of the ref attribute MUST be compared on a case-
   sensitive, character-by-character basis.  Relative references MUST
   NOT be used.  The IRI is used strictly for identification and cannot
   be assumed to be dereferenceable.

   An optional href attribute MAY be used to specify a dereferenceable
   IRI of a human-readable description of the feature.  Relative



Snell                    Expires April 24, 2008                 [Page 4]


Internet-Draft              Atompub Features                October 2007


   references MAY be used.

   The optional label attribute MAY be used to specify a human-readable
   label for the feature.  The value of the label attribute is Language-
   Sensitive as defined by Section 2 of [RFC4287].

   The f:feature element MAY contain a mix of text and any number of
   child elements and attributes from any XML namespace, with the
   exception of the f:feature element itself.  Such markup is considered
   to be metadata applicable to the feature identified.  Software agents
   MUST NOT stop processing or signal an error or change their behavior
   as a result of encountering such markup.

   An app:collection element MAY contain any number of f:feature
   elements but MUST NOT contain more than one with the same ref
   attribute value.  The order in which f:feature elements appear within
   the app:collection element is insignificant.

   The presence of a f:feature element is an indication that the
   collection supports the feature identified.  The lack of a f:feature
   element identifying a particular feature indicates that support for
   that feature is unspecified.  This does not mean that the feature is
   not supported, only that the server has not explicitly declared
   support.  There are no means by which a server can indicate that a
   given feature is unsupported.

3.1.  Example

   The following is an example of a collection using the f:feature
   element to indicate its support for the app:draft element as defined
   by [RFC5023].

     <service
       xmlns="http://www.w3.org/2007/app"
       xmlns:atom="http://www.w3.org/2005/Atom"
       xmlns:f="http://purl.org/atompub/features/1.0">
       <workspace>
         <atom:title>My Workspace</atom:title>
         <collection href="...">
           <atom:title>My Atom Collection</atom:title>
           <accept>application/atom+xml;type=entry</accept>
           <f:feature
             ref="http://purl.org/atompub/features/1.0/supportsDraft" />
         </collection>
       </workspace>
     </service>





Snell                    Expires April 24, 2008                 [Page 5]


Internet-Draft              Atompub Features                October 2007


4.  The "supportsDraft" Feature

   The "supportsDraft" feature is used to indicate that a collection
   supports the use of the app:draft control element as defined by
   Section 13.1.1 of [RFC5023].  The IRI of the "supportsDraft" feature
   is:
     http://purl.org/atompub/features/1.0/supportsDraft


5.  The "ignoresDraft" Feature

   The "ignoresDraft" feature is used to indicate that a collection will
   ignore the use of the app:draft control element as defined by Section
   13.1.1 of [RFC5023].  The IRI of the "ignoresDraft" feature is:
     http://purl.org/atompub/features/1.0/ignoresDraft

   A server MUST NOT declare support for both the "supportsDraft" and
   "ignoresDraft" features within the a single app:collection element.


6.  Security Considerations

   Specific features supported by a collection may introduce security
   considerations and concerns beyond those discussed by the Atom
   Publishing Protocol and Atom Syndication Format specifications.
   Implementors must refer to the specifications and description of each
   feature to determine the security considerations relevant to each.


7.  IANA Considerations

   This specification does not define any actions for IANA.


8.  Normative References

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119, March 1997.

   [RFC3986]  Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform
              Resource Identifier (URI): Generic Syntax", STD 66,
              RFC 3986, January 2005.

   [RFC3987]  Duerst, M. and M. Suignard, "Internationalized Resource
              Identifiers (IRIs)", RFC 3987, January 2005.

   [RFC4287]  Nottingham, M., Ed. and R. Sayre, Ed., "The Atom
              Syndication Format", RFC 4287, December 2005.



Snell                    Expires April 24, 2008                 [Page 6]


Internet-Draft              Atompub Features                October 2007


   [RFC5023]  Gregorio, J. and B. de hOra, "The Atom Publishing
              Protocol", RFC 5023, October 2007.

   [W3C.REC-xml-20060816]
              Bray, T., Paoli, J., Yergeau, F., Sperberg-McQueen, C.,
              and E. Maler, "Extensible Markup Language (XML) 1.0
              (Fourth Edition)", World Wide Web Consortium
              Recommendation REC-xml-20060816, August 2006,
              <http://www.w3.org/TR/2006/REC-xml-20060816>.

   [W3C.REC-xml-infoset-20040204]
              Tobin, R. and J. Cowan, "XML Information Set (Second
              Edition)", World Wide Web Consortium Recommendation REC-
              xml-infoset-20040204, February 2004,
              <http://www.w3.org/TR/2004/REC-xml-infoset-20040204>.

   [W3C.REC-xml-names-20060816]
              Hollander, D., Tobin, R., Bray, T., and A. Layman,
              "Namespaces in XML 1.0 (Second Edition)", World Wide Web
              Consortium Recommendation REC-xml-names-20060816,
              August 2006,
              <http://www.w3.org/TR/2006/REC-xml-names-20060816>.

   [W3C.REC-xmlbase-20010627]
              Marsh, J., "XML Base", World Wide Web Consortium
              Recommendation REC-xmlbase-20010627, June 2001,
              <http://www.w3.org/TR/2001/REC-xmlbase-20010627>.


Appendix A.  Acknowledgements

   The author acknowledges the feedback from the other members of the
   IETF Atom Publishing working group during the development of this
   specification.


Author's Address

   James M Snell


   Phone:
   Email: jasnell@gmail.com
   URI:   http://snellspace.com







Snell                    Expires April 24, 2008                 [Page 7]


Internet-Draft              Atompub Features                October 2007


Full Copyright Statement

   Copyright (C) The IETF Trust (2007).

   This document is subject to the rights, licenses and restrictions
   contained in BCP 78, and except as set forth therein, the authors
   retain all their rights.

   This document and the information contained herein are provided on an
   "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
   OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND
   THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS
   OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF
   THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
   WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.


Intellectual Property

   The IETF takes no position regarding the validity or scope of any
   Intellectual Property Rights or other rights that might be claimed to
   pertain to the implementation or use of the technology described in
   this document or the extent to which any license under such rights
   might or might not be available; nor does it represent that it has
   made any independent effort to identify any such rights.  Information
   on the procedures with respect to rights in RFC documents can be
   found in BCP 78 and BCP 79.

   Copies of IPR disclosures made to the IETF Secretariat and any
   assurances of licenses to be made available, or the result of an
   attempt made to obtain a general license or permission for the use of
   such proprietary rights by implementers or users of this
   specification can be obtained from the IETF on-line IPR repository at
   http://www.ietf.org/ipr.

   The IETF invites any interested party to bring to its attention any
   copyrights, patents or patent applications, or other proprietary
   rights that may cover technology that may be required to implement
   this standard.  Please address the information to the IETF at
   ietf-ipr@ietf.org.


Acknowledgment

   Funding for the RFC Editor function is provided by the IETF
   Administrative Support Activity (IASA).





Snell                    Expires April 24, 2008                 [Page 8]


Html markup produced by rfcmarkup 1.129d, available from https://tools.ietf.org/tools/rfcmarkup/