[Docs] [txt|pdf|xml] [Tracker] [Email] [Diff1] [Diff2] [Nits] [IPR]

Versions: 00 01 02 draft-tschofenig-ace-group-communication-security

ace                                                          A. Somaraju
Internet-Draft                                     Tridonic GmbH & Co KG
Intended status: Standards Track                                S. Kumar
Expires: July 18, 2016                                  Philips Research
                                                           H. Tschofenig
                                                                ARM Ltd.
                                                               W. Werner
                                         Werner Management Services e.U.
                                                        January 15, 2016


              Security for Low-Latency Group Communication
                  draft-somaraju-ace-multicast-01.txt

Abstract

   Some Internet of Things application domains, such as lighting, have
   strict requirements on latency for group communication.  From a user
   experience point of view latency less than 200 ms is necessary from
   an action triggered by a user to the visible effects.  This draft
   describes procedures for authorization, key management, and securing
   group messages within a low latency application domain with a special
   emphasis on lighting systems.  We specify the usage of object
   security at the application layer for group communication and assume
   that CoAP is used as the application layer protocol.

Status of This Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at http://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on July 18, 2016.

Copyright Notice

   Copyright (c) 2016 IETF Trust and the persons identified as the
   document authors.  All rights reserved.




Somaraju, et al.          Expires July 18, 2016                 [Page 1]


Internet-Draft      IoT Group Communication Security        January 2016


   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   2
   2.  Terminology . . . . . . . . . . . . . . . . . . . . . . . . .   3
   3.  Architecture  . . . . . . . . . . . . . . . . . . . . . . . .   4
     3.1.  Assumptions . . . . . . . . . . . . . . . . . . . . . . .   7
     3.2.  AT-KDC Access Tokens  . . . . . . . . . . . . . . . . . .   8
     3.3.  AT-R Access Tokens  . . . . . . . . . . . . . . . . . . .   9
     3.4.  Multicast Message Content . . . . . . . . . . . . . . . .  10
     3.5.  Receiver Algorithm  . . . . . . . . . . . . . . . . . . .  11
     3.6.  Sender Algorithm  . . . . . . . . . . . . . . . . . . . .  12
   4.  Security Considerations . . . . . . . . . . . . . . . . . . .  14
     4.1.  Token Verification  . . . . . . . . . . . . . . . . . . .  14
     4.2.  Token Revocation  . . . . . . . . . . . . . . . . . . . .  14
     4.3.  Time  . . . . . . . . . . . . . . . . . . . . . . . . . .  14
   5.  Operational Considerations  . . . . . . . . . . . . . . . . .  15
     5.1.  Persistence of State Information  . . . . . . . . . . . .  15
     5.2.  Provisioning in Small Networks  . . . . . . . . . . . . .  15
     5.3.  Client IDs  . . . . . . . . . . . . . . . . . . . . . . .  15
     5.4.  Application Groups vs. Security Groups  . . . . . . . . .  15
     5.5.  Lost/Stolen Device  . . . . . . . . . . . . . . . . . . .  16
   6.  Acknowledgements  . . . . . . . . . . . . . . . . . . . . . .  16
   7.  IANA Considerations . . . . . . . . . . . . . . . . . . . . .  16
   8.  References  . . . . . . . . . . . . . . . . . . . . . . . . .  17
     8.1.  Normative References  . . . . . . . . . . . . . . . . . .  17
     8.2.  Informative References  . . . . . . . . . . . . . . . . .  17
   Appendix A.  Access Levels  . . . . . . . . . . . . . . . . . . .  18
   Authors' Addresses  . . . . . . . . . . . . . . . . . . . . . . .  19

1.  Introduction

   There are low latency group communication use cases that require
   securing communication between a sender, or a group of senders, and a
   group of receivers.  In the lighting use case, a set of lighting
   nodes (e.g., luminaires, wall-switches, sensors) are grouped together
   into a single "Application Group" and the following three
   requirements need to be addressed:




Somaraju, et al.          Expires July 18, 2016                 [Page 2]


Internet-Draft      IoT Group Communication Security        January 2016


   1.  Only authorized members of the application group must be able to
       read and process messages.

   2.  Receivers of group messages must be able to verify the integrity
       of received messages as being generated within the group.

   3.  Message communication and processing must happen with a low
       latency and in synchronous manner.

   This document discusses a group communication security solution that
   satisfies these three requirements.  This write-up focuses on the
   lighting use case but the content is equally applicable to other low-
   latency application domains, such as blinds control.

2.  Terminology

   This document uses the following terms from [I-D.ietf-ace-actors]:
   Authorization Server, Resource Owner, Client, Resource Server.  The
   terms 'sender' and 'receiver' refer to the application layer
   messaging used for lighting control; other communication interactions
   with the supporting infrastructure uses unicast messaging.

   When nodes are combined into groups there are different layers of
   those groups with unique characteristics.  For clarity we introduce
   terminology for three different groups:

   Application Group:

      An application group consists of the set of all nodes that have
      been configured to respond to a single application layer request.
      For example, a wall mounted switch and a set of luminaires in a
      single room might belong to a single group and the switch may be
      used to turn on/off all the luminaires in the group simultaneously
      with a single button press.  In the remainder of this document we
      will use GId to identify an application group.

   Multicast Group:

      A multicast group consists of the set of all nodes that subscribe
      to the same multicast IP address.

   Security Group:

      A security group consists of the set of all nodes that have been
      provisioned with the same keying material.  All the nodes within a
      security group share a security association or a sequence of
      security associations wherein a single association specifies the




Somaraju, et al.          Expires July 18, 2016                 [Page 3]


Internet-Draft      IoT Group Communication Security        January 2016


      keying material, algorithm-specific information, lifetime and a
      key ID.

   Typically, the three groups might not coincide due to the memory
   constraints on the devices and also security considerations.  For
   instance, in a small room with windows, we may have three application
   groups: "room group", "luminaires close to the window group" and
   "luminaires far from the window group".  However, we may choose to
   use only one multicast group for all devices in the room and one
   security group for all the devices in the room.  Note that every
   application group belongs to a unique security group.  However, the
   converse is not always true.  This implies that the application group
   ID maybe used to determine the associated security group but not vice
   versa.

   The fact that security groups may not coincide with application
   groups implies that

      (1) an application must be able to specify which resources on a
      resource server are accessible by a client that has access to the
      group key, and

      (2) a method is required to associate the group key to the
      application group(s) for which the group key may be used.

   In this document we provide fields that may be used to specify the
   "scope of the key" and "application groups for which the key may be
   used".  A commissioner has a lot of flexibility to assign nodes to
   multicast groups and to security groups while the application groups
   will be determined by the semantics of the application itself.  The
   exact partitioning of the nodes into security and multicast groups is
   therefore deployment specific.

3.  Architecture

   Each node in a lighting application group might be a sender, a
   receiver or both sender and receiver (even though in Figure 1, we
   show nodes that are only senders or only receivers for clarity).  The
   low latency requirement implies that most of the communication
   between senders and receivers of application layer messages is done
   using multicast IP.  On some occasions, a sender in a group will be
   required to send unicast messages to unique receivers within the same
   group and these unicast messages also need communication security.

   Two logical entities are introduced and they have the following
   function:





Somaraju, et al.          Expires July 18, 2016                 [Page 4]


Internet-Draft      IoT Group Communication Security        January 2016


   Key Distribution Center (KDC):  This logical entity is responsible
      for generating symmetric keys and distributing them to the nodes
      authorized to receive them.  The KDC ensures that nodes belonging
      to the same security group receive the same key and that the keys
      are renewed based on certain events, such as key expiry or change
      in group membership.

   Authorization Server (AS):  This logical entity stores authorization
      information about devices, meta-data about them, and their roles
      in the network.  For example, a luminaire is associated with
      different groups, and may have meta-data about its location in a
      building.

   Note that we assume that nodes are pre-configured with device
   credentials (e.g., a certificate and the corresponding private key)
   during manufacturing or during an initial provisioning phase.  These
   device credentials are used in the interaction with the authorization
   server.

   Figure 1 and Figure 2 provide an architectural overview.  The dotted
   lines illustrate the use of unicast DTLS messages for securing the
   message exchange between all involved parties.  The secured group
   messages between senders and receivers are indicated using lines with
   star/asterisk characters.  The security of the group messages is
   accomplished at the application level using OSCOAP - Object Security
   of CoAP (see [I-D.selander-ace-object-security]).

   Figure 1 illustrates the information flow between an authorization
   server and the nodes participating in the lighting network, which
   includes all nodes that exchange lighting application messages.  This
   step is typically executed during the commissioning phase for nodes
   that are fixed-mounted in buildings.  The authorization server, as a
   logical function, may in smaller deployments be included in a device
   carried by the commissioner and only be present during the
   commissioning phase.  Other use cases, such as employees using their
   smartphones to control lights, may require an authorization server
   that dynamically executes access control decisions.

   Figure 1 shows the commissioning phase where the nodes obtain
   configuration information, which includes the AT-KDC.  The AT-KDC is
   an access token and includes authorization claims for consumption by
   the key distribution center.  We use the access token terminology
   from [RFC6749].  The AT-KDC in this architecture may be a bearer
   token or a proof-of-possession (PoP) token.  The bearer token concept
   is described in [RFC6750] and the PoP token concept is explained in
   [I-D.ietf-oauth-pop-architecture].  The AT-KDC is created by the
   authorization server after authenticating the requesting node and
   contains authorization-relevant information.  The AT-KDC is protected



Somaraju, et al.          Expires July 18, 2016                 [Page 5]


Internet-Draft      IoT Group Communication Security        January 2016


   against modifications using a digital signature or a message
   authentication code.  It is verified in Figure 2 by the KDC.


                 Config    +-------------+    Config
               +-----------+Authorization+------------+
               | .........>|   Server    |<.......... |
               | .  DTLS   +-------------+   DTLS   . |
               | .                ^^                . |
               | .                |.                . |
               | .                |.                . |
               v v                |.                v v
            +-----+         Config|.DTLS          +-----+
           +-----+|               |.             +-----+|
          +-----+|+               |.            +-----+|+
          |  A  |+                vv            |  C  |+
          +-----+               +-----+         +-----+
        .  E.g.                +-----+|           E.g.
           Light              +-----+|+        Luminaires
          Switches            |  B  |+
                              +-----+
                                E.g.
                              Presence
                              Sensors
   Legend:

   Config (Configuration Data): Includes configuration
   parameters, authorization information encapsulated
   inside the access token (AT-KDC) and other meta-
   data.


               Figure 1: Architecture: Commissioning Phase.

   In the simplified message exchange shown in Figure 2 a sender
   requests a security group key and the access token for use with the
   receivers (called AT-R).  The request contains information about the
   resource it wants to access, such as the application group and other
   resource-specific information, if applicable, and the previously
   obtained AT-KDC access token.  Once the sender has successfully
   obtained the requested information it starts communicating with
   receivers in that group using group messages.  The symmetric key
   obtained from the KDC is used to secure the groups messages.  The
   AT-R may be attached to the initial request.

   Receivers need to perform two steps, namely to obtain the necessary
   group key to verify the incoming messages and to determine what




Somaraju, et al.          Expires July 18, 2016                 [Page 6]


Internet-Draft      IoT Group Communication Security        January 2016


   resource the requestor is authorized to access.  Both pieces of
   information can be found in the AT-R access token.

   Group messages need to be protected such that replay and modification
   can be detected.  The integrity of the message is accomplished using
   a keyed message digest in combination with the group key.  The use of
   symmetric keys is envisioned in this specification due to latency
   requirements.  For unicast messaging between the group members and
   the AS or KDC, we assume the use of DTLS for transport security.
   However, the use of TLS, and application layer security is possible
   but is outside the scope of this document.


             Request                     Request
             +AT-KDC    +------------+   +AT-KDC
          +------------>|    Key     |<----------+
          |+------------|Distribution|----------+|
          ||Reply       |   Center   |    Reply ||
          ||+AT-R       +------------+    +AT-R ||
          ||+Group    ..^           ^..  +Group ||
          || Key    ..                 ..   Key ||
          ||     ...DTLS           DTLS  ..     ||
          |v    ..                         ..   v|
        +-----+<.                            .>+-----+
       +-----+|                               +-----+|
      +-----+|+   Secure Multicast Msg       +-----+|+
      |  A  |+*****************************> |  B  |+
      +-----+                                +-----+
      Sender(s)                            Receiver(s)
   e.g. Light Switch                    e.g. Luminaires


           Figure 2: Architecture: Group Key Distribution Phase.

3.1.  Assumptions

   1.  The AT-KDC is a manifestation of the authorization granted to a
       specific client (or user running a client).  The AT-KDC is
       longer-lived and can be used to request multiple AT-Rs.

   2.  Each AT-R is valid for use with one or multiple application
       groups.

   3.  The AS and the KDC logical roles may reside in different physical
       entities.






Somaraju, et al.          Expires July 18, 2016                 [Page 7]


Internet-Draft      IoT Group Communication Security        January 2016


   4.  The AT-KDC as well as the AT-R may be self-contained tokens or
       references.  References are more efficient from a bandwidth point
       of view but require an additional lookup.

   5.  The AT-KDC token is opaque to the client.  Data that is meant for
       processing by the client has to be conveyed to the client
       separately.  The AT-R token on the other hand is meant for
       consumption by the client.

   6.  The client requests AT-Rs for different application groups by
       including additional information in the request to the KDC for
       what application groups the AT-R(s) have to be requested.  The
       KDC may return multiple AT-Rs in a single response (for
       performance reasons).

   7.  The AT-KDC and the AT-R are encoded as CBOR Web Tokens
       [I-D.wahlstroem-ace-cbor-web-token] and protected using COSE
       [I-D.ietf-cose-msg].

3.2.  AT-KDC Access Tokens

   The AT-KDC contains

   1.  Issuer: Entity creating the access token.  This information needs
       to be cryptographically bound to the digital signature/keyed
       message digest protecting the content of the token, as provided
       by the CBOR Web Token (CWT).

   2.  Expiry date: Information can be omitted if tokens do not expire
       (for example, in a small enterprise environment).

   3.  Scope: Permissions of the entity holding the token.  This
       includes information about the resources that may be accessed
       with the token (e.g., access level) and application layer group
       IDs for the groups for which the tokens may be used.

   4.  Recipient/Audience: Indication to whom the AT-KDC was issued to.
       In this case, it is the KDC.

   5.  Client ID: Information about the client that was authenticated by
       the authorization server.

   6.  Issued at: Indicates date and time when the AT-KDC was created by
       the authorization server.







Somaraju, et al.          Expires July 18, 2016                 [Page 8]


Internet-Draft      IoT Group Communication Security        January 2016


3.3.  AT-R Access Tokens

   Clients send the AT-KDC to the KDC in order to receive an AT-R.

   The KDC MUST maintain a table consisting of scope values, which
   includes the application group id.  These entries point to a sequence
   of security associations.  A security association specifies the key
   material, algorithm-specific information, lifetime and a key ID and
   the key ID may be used to identify this security association.

   The AS/KDC must guarantee the uniqueness of the client ids for its
   nodes.  This may be accomplished by the AS/KDC assigning values to
   the nodes or by using information that is already unique per device
   (such as an EUI-64).

   The KDC furthermore needs to be configured with information about the
   authorization servers it trusts.  This may include a provisioned
   trust anchor store, or shared credentials (similar to a white list).

   The KDC MUST generate new group keys after the validity period of the
   current group key expires.

   The AT-R contains

   1.  Issuer: Entity creating the access token.  This information needs
       to be cryptographically bound to the digital signature/keyed
       message digest protecting the content of the token, as provided
       by the CBOR Web Token (CWT).

   2.  Expiry date: Information can be omitted if tokens do not expire
       (for example, in a small enterprise environment).

   3.  Scope: Permissions of the entity holding the token.  This
       includes information about the resources that may be accessed
       with the token (e.g., access level) and application layer group
       IDs for the groups for which the tokens may be used.

   4.  Security Group Key: Key to use for the group communication.

   5.  Algorithm: Used for secure group communication.

   6.  KID: Sequentially increasing ID of the key for the security group
       (the devices may store an older key to help with key rolling.)

   7.  Issued at: Indicates date and time when the AT-R was created by
       the KDC.





Somaraju, et al.          Expires July 18, 2016                 [Page 9]


Internet-Draft      IoT Group Communication Security        January 2016


3.4.  Multicast Message Content

   The following information is needed for the cryptographic algorithm,
   which is assumed to be in the COSE header:

   1.  Nonce value consisting of

       *  Client ID (unencrypted, integrity protected): Every sender
          managed by a key distribution center MUST have a unique client
          ID.

       *  Sequence Number (unencrypted, integrity protected): Used for
          replay protection.

       *  An implicit IV that is either derived from the keys at the
          end-points or fixed to a certain value by standard (not sent
          in the message)

   2.  MAC (not integrity protected): For integrity protection.

   The following information is additionally required to process the
   secure message:

   1.  Destination IP address and port (not encrypted, integrity
       protected): Integrity protection of the IP address and port
       ensures that the message content cannot be replayed with a
       different destination address or on a different port.

   2.  CoAP Path (encrypted, integrity protected): Uniquely identifies
       the target resource of a CoAP request.

   3.  Application Group id in CoAP header (unencrypted, integrity
       protected): Is used to identify a sequence of security
       associations to use to decrypt the message.  The CoAP header
       option is TBD.

   4.  Key ID (unencrypted, integrity protected): Is used to select the
       current security association from the sequence of security
       associations identified by the application group id.

   5.  CoAP Header Options other than application group id (encrypted -
       if desired, integrity protected)

   6.  CoAP Payload (encrypted, integrity protected).







Somaraju, et al.          Expires July 18, 2016                [Page 10]


Internet-Draft      IoT Group Communication Security        January 2016


3.5.  Receiver Algorithm

   All receiving devices MUST maintain a table consisting of mappings of
   application group id, to a sequence of security associations.

   When a node receives an incoming multicast message it looks up the
   application group id and the key id (which are both found in the CoAP
   header) to determine the correct security association.

   The key id is used for situations where the group key is updated by
   the KDC (for example in situations where a device in a group is lost
   or stolen).

   To check for replay attacks the receiver has to consult the state
   stored with the security association to obtain the current sequence
   number and to compare it against the sequence number found in the
   request payload for that sender based on the Sender ID.  The receiver
   needs to store the latest correctly verified nonce values to detect
   replay attacks

   The receiver MUST silently discard an incoming message in the
   following cases:

   o  Application Group ID lookup does not return any security
      association.

   o  Key ID lookup among the previously retrieved sequence of security
      associations does not identify a unique security association.

   o  Integrity check fails.

   o  Decryption fails.

   o  Replay protection check failed.  The (client ID || sequence
      number), which are both part of the nonce, have already been
      received in an earlier message.

   Once the cryptographic processing of the message is completed, the
   receiver must check whether the sender is authorized to access the
   protected resource, indicated by the CoAP request URI at the right
   level.  For this purpose the receiver consults the locally stored
   authorization database that was populated with the information
   obtained via the AT-R token and the static authorization levels
   described in Appendix A.

   Once all verification steps have been successful the receiver
   executes the CoAP request and returns an appropriate response.  Since
   the response message will also be secured the message protection



Somaraju, et al.          Expires July 18, 2016                [Page 11]


Internet-Draft      IoT Group Communication Security        January 2016


   processing described in Section 3.6 must be executed.  Additionally,
   the nonce value corresponding to the security association MUST be
   updated to the nonce value in the message.

3.6.  Sender Algorithm

   Figure 3 describes the algorithm for obtaining the necessary
   credentials to transmit a secure group message.  When the sender
   wants to send a message to the application group, it checks if it has
   the respective group key.  If no group key is available then it
   determines whether it has an access token for use with the KDC (i.e.,
   AT-KDC).  If no AT-KDC is found in the cache then it contacts the
   authorization server to obtain that AT-KDC.  Note that this assumes
   that the authorization server is online, which is only true in
   scenarios where granting authorization dynamically is supported.  In
   the other case where the AT-KDC is already available the sender
   contacts the KDC to obtain a group key.  If a group key is already
   available then the sender can transmit a secured message to the group
   immediately.
































Somaraju, et al.          Expires July 18, 2016                [Page 12]


Internet-Draft      IoT Group Communication Security        January 2016


                                     _______
                                    /       \
                                    | Start |
                                    \_______/
                                        |
                                        v
                                       /\
                                      /  \
                                     /    \
                                    /      \
                                   /        \
                         ___No____/Group Key \____
                        |         \Available?/    |
                        |          \        /     |
                        v           \      /     Yes
                       /\            \    /       |
                      /  \            \  /        v
                     /    \            \/   +-------------+
                    /      \            ^   |Transmit     |
                   /        \           |   |multicast    |
              ____/  AT+KDC  \__        |   |mesg to group|
             |    \Available?/  |       |   +-------------+
             |     \        /   |       |
            No      \      /   Yes      |
             |       \    /     |       |
             |        \  /      |       |
             v         \/       v       |
       +-----+-----+   ^  +----------+  |
       |Request    |   |  |Request   |  |
       |AT-KDC     |   |  |Group Key |  |
       |from       |---+  |from KDC  |--+
       |Auth Server|      |          |
       +-----------+      +----------+


    Figure 3: Steps to Transmit Multicast Message (w/o Failure Cases).

   Note that the sender does not have to wait until it has to transmit a
   message in order to request a group key; the sender is likely to be
   pre-configured with information about which application group it
   belongs to and can therefore pre-fetch the required information.

   Group keys have a lifetime, which is configuration-dependent, but
   mechanisms need to be provided to update the group keys either via
   the sender asking for a group key renewal or via the KDC pushing new
   keys to senders and receivers.  The lifetime can be based on time or
   on the number of transmitted messages.




Somaraju, et al.          Expires July 18, 2016                [Page 13]


Internet-Draft      IoT Group Communication Security        January 2016


4.  Security Considerations

4.1.  Token Verification

   Due to the low latency requirements, token verification needs to be
   done locally and cannot be outsourced to other parties.  For this
   reason a self-contained token must be used and the receivers are
   required to follow the steps outlined in Section 7.2 of RFC 7519
   [RFC7519].  This includes the verification of the message
   authentication code protecting the contents of the token and the
   encryption envelope protecting the contained symmetric group key.

4.2.  Token Revocation

   Tokens have a specific lifetime.  Setting the lifetime is a policy
   decision that involves making a trade-off decision.  Allowing a
   longer lifetime increases the need to introduce a mechanism for token
   revocation (e.g., a real-time signal from the KDC/Authorization
   Server to the receivers to blacklist tokens) but lowers the
   communication overhead during normal operation since new tokens need
   to be obtained only from time to time.  Real-time communication with
   the receivers to revoke tokens may not be possible in all cases
   either, particularly when off-line operation is demanded or in small
   networks where the AS or even the KDC is only present during
   commissioning time.

   We therefore recommend to issue short-lived tokens for dynamic
   scenarios like users accessing the lighting infrastructure of
   buildings using smartphones, tablets and alike to avoid potential
   security problems when tokens are leaked or where authorization
   rights are revoked.  For senders that are statically mounted (like
   traditional light switches) we recommend a longer lifetime since re-
   configurations and token leakage is less likely to happen frequently.

   To limit the authorization rights, tokens should contain an audience
   restriction, scoping their use to the intended receivers and to their
   access level.

4.3.  Time

   Senders and receivers are not assumed to be equipped with real-time
   clocks but these devices are still assumed to interact with a time
   server.  The lack of accurate clocks is likely to lead to clock
   drifts and limited ability to check for replays.  For those cases
   where no time server is available, such as in small network
   installations, token verification cannot check for expired tokens and
   hence it might be necessary to fall-back to tokens that do not
   expire.



Somaraju, et al.          Expires July 18, 2016                [Page 14]


Internet-Draft      IoT Group Communication Security        January 2016


5.  Operational Considerations

5.1.  Persistence of State Information

   Devices in the lighting system can often be powered down
   intentionally or unintentionally.  Therefore the devices may need to
   store the authorization tokens and cryptographic keys (along with
   replay context) in persistent storage like flash.  This is especially
   required if the authorization server is no more online because it was
   removed after the commissioning phase.  However the decision on the
   data to be persistently stored is a trade-off between how soon the
   devices can be back online to normal operational mode and the memory
   wear caused due to limited program-erase cycles of flash over the
   15-20 years life-time of the device.

   The different data that may need to be stored are access tokens AT-
   KDC, AT-R and last seen replay counter.

5.2.  Provisioning in Small Networks

   In small networks the authorization server and the KDC may be
   available only temporarily during the commissioning process and are
   not available afterwards.

5.3.  Client IDs

   A single device should not be managed by multiple KDCs.  However, a
   group of devices in a domain (such as a lighting installation within
   an enterprise) should either be managed by a single KDC or, if there
   are multiple KDCs serving the devices in a given domain, these KDCs
   MUST exchange information so that the assigned client id and
   application group id values are unique within the devices in that
   domain.  We assume that only devices within a given domain
   communicate with each other using group messages.

5.4.  Application Groups vs. Security Groups

   Multiple application groups may use the same key for performance
   reasons, reducing the number of keys needed to be stored - leading to
   less RAM needed by each node.  This is only a reasonable option if
   the attack surface is not increased.  For example, a room A is
   configured to use three application groups to address a subset of the
   device.  In addition to configuring all nodes in room A with these
   three application groups the nodes are configured with a special
   group that allows them to access all devices in room A, referred as
   the all-nodes-in-room-A group.  In this case, having the nodes to use
   the same key for the all-nodes-in-room group and the three groups
   does not increase the attack surface since any node can already use



Somaraju, et al.          Expires July 18, 2016                [Page 15]


Internet-Draft      IoT Group Communication Security        January 2016


   the all-nodes-in-room-A group to control other devices in that room.
   The three application groups in room A are a subset of the larger
   all-nodes-in-room-A group.

5.5.  Lost/Stolen Device

   The following procedure MUST be implemented if a device is stolen or
   keys are lost.

   1.  The AS tells the KDC to invalidate the AT-KDC.

   2.  The KDC no longer returns a new group key if the invalidated AT-
       KDC is presented to it.

   3.  The KDC generates new keys for all security groups to which the
       compromised device belongs.

   The KDC SHOULD inform all devices in the security group to update
   their group key.  This requires the KDC to maintain a list of all
   devices that belong to the security group and to be able to contact
   them reliably.

6.  Acknowledgements

   The author would like to thank Esko Dijk for his help with this
   document.

   Parts of this document are a byproduct of the OpenAIS project,
   partially funded by the Horizon 2020 programme of the European
   Commission.  It is provided "as is" and without any express or
   implied warranties, including, without limitation, the implied
   warranties of fitness for a particular purpose.  The views and
   conclusions contained herein are those of the authors and should not
   be interpreted as necessarily representing the official policies or
   endorsements, either expressed or implied, of the OpenAIS project or
   the European Commission.

7.  IANA Considerations

   This document defines one CoAP Header Option Application Group ID
   that MUST be allocated in the Registry "CoAP Option Numbers" of
   [RFC6749].  IANA is requested to allocation TBD option number to
   application group ID in this specification.








Somaraju, et al.          Expires July 18, 2016                [Page 16]


Internet-Draft      IoT Group Communication Security        January 2016


8.  References

8.1.  Normative References

   [I-D.ietf-ace-actors]
              Gerdes, S., Seitz, L., Selander, G., and C. Bormann, "An
              architecture for authorization in constrained
              environments", draft-ietf-ace-actors-02 (work in
              progress), October 2015.

   [I-D.ietf-cose-msg]
              Schaad, J., "CBOR Encoded Message Syntax", draft-ietf-
              cose-msg-09 (work in progress), December 2015.

   [I-D.wahlstroem-ace-cbor-web-token]
              Wahlstroem, E., Jones, M., and H. Tschofenig, "CBOR Web
              Token (CWT)", draft-wahlstroem-ace-cbor-web-token-00 (work
              in progress), December 2015.

   [RFC7252]  Shelby, Z., Hartke, K., and C. Bormann, "The Constrained
              Application Protocol (CoAP)", RFC 7252,
              DOI 10.17487/RFC7252, June 2014,
              <http://www.rfc-editor.org/info/rfc7252>.

8.2.  Informative References

   [I-D.ietf-oauth-pop-architecture]
              Hunt, P., Richer, J., Mills, W., Mishra, P., and H.
              Tschofenig, "OAuth 2.0 Proof-of-Possession (PoP) Security
              Architecture", draft-ietf-oauth-pop-architecture-07 (work
              in progress), December 2015.

   [I-D.selander-ace-object-security]
              Selander, G., Mattsson, J., Palombini, F., and L. Seitz,
              "Object Security of CoAP (OSCOAP)", draft-selander-ace-
              object-security-03 (work in progress), October 2015.

   [RFC6749]  Hardt, D., Ed., "The OAuth 2.0 Authorization Framework",
              RFC 6749, DOI 10.17487/RFC6749, October 2012,
              <http://www.rfc-editor.org/info/rfc6749>.

   [RFC6750]  Jones, M. and D. Hardt, "The OAuth 2.0 Authorization
              Framework: Bearer Token Usage", RFC 6750,
              DOI 10.17487/RFC6750, October 2012,
              <http://www.rfc-editor.org/info/rfc6750>.






Somaraju, et al.          Expires July 18, 2016                [Page 17]


Internet-Draft      IoT Group Communication Security        January 2016


   [RFC7519]  Jones, M., Bradley, J., and N. Sakimura, "JSON Web Token
              (JWT)", RFC 7519, DOI 10.17487/RFC7519, May 2015,
              <http://www.rfc-editor.org/info/rfc7519>.

Appendix A.  Access Levels

   A characteristic of the lighting domain is that access control
   decisions are also impacted by the type of operation being performed
   and those categories are listed below.  The following access levels
   are pre-defined.

   Level 0: Service detection only

      This is a service that is used with broadcast service detection
      methods.  No operational data is accessible at this level.

   Level 1: Reporting only

      This level allows access to sensor and other (relatively
      uncritical) operational data and the device error status.  The
      operation of the system cannot be influenced using this level.

   Level 2: Standard use

      This level allows access to all operational features, including
      access to operational parameters.  This is the highest level of
      access that can be obtained using (secure) multicast.

   Level 3: Commissioning use / Parametrization Services

      This level gives access to certain parameters that change the day-
      to-day operation of the system, but does not allow structural
      changes.

   Level 4: Commissioning use / Localization and Addressing Services

      (including Factory Reset) This level allows access to all services
      and parameters including structural settings.

   Level 5: Software Update and related Services

      This level allows the change and upgrade of the software of the
      devices.

   Note: The use of group security is disallowed for level higher than
   Level 2 and unicast communication is used instead.





Somaraju, et al.          Expires July 18, 2016                [Page 18]


Internet-Draft      IoT Group Communication Security        January 2016


Authors' Addresses

   Abhinav Somaraju
   Tridonic GmbH & Co KG
   Farbergasse 15
   Dornbirn   6850
   Austria

   Email: abhinav.somaraju@tridonic.com


   Sandeep S. Kumar
   Philips Research
   High Tech Campus 34
   Eindhoven  5656 AE
   Netherland

   Email: ietf.author@sandeep-kumar.org


   Hannes Tschofenig
   ARM Ltd.
   Hall in Tirol  6060
   Austria

   Email: Hannes.tschofenig@gmx.net
   URI:   http://www.tschofenig.priv.at


   Walter Werner
   Werner Management Services e.U.
   Josef-Anton-Herrburgerstr. 10
   Dornbirn  6850
   Austria

   Email: werner@werner-ms.at















Somaraju, et al.          Expires July 18, 2016                [Page 19]


Html markup produced by rfcmarkup 1.129b, available from https://tools.ietf.org/tools/rfcmarkup/