[Docs] [txt|pdf] [Tracker] [Email] [Diff1] [Diff2] [Nits]

Versions: (draft-valin-videocodec-pvq) 00

Network Working Group                                          JM. Valin
Internet-Draft                                                   Mozilla
Intended status: Standards Track                            June 9, 2015
Expires: December 11, 2015

              Pyramid Vector Quantization for Video Coding


   This proposes applying pyramid vector quantization (PVQ) to video

Status of This Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at http://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on December 11, 2015.

Copyright Notice

   Copyright (c) 2015 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

   This document may not be modified, and derivative works of it may not
   be created, and it may not be published except as an Internet-Draft.

Valin                   Expires December 11, 2015               [Page 1]

Internet-Draft                  Video PVQ                      June 2015

Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   2
   2.  Gain-Shape Coding and Activity Masking  . . . . . . . . . . .   2
   3.  Householder Reflection  . . . . . . . . . . . . . . . . . . .   3
   4.  Angle-Based Encoding  . . . . . . . . . . . . . . . . . . . .   4
   5.  Bi-prediction . . . . . . . . . . . . . . . . . . . . . . . .   5
   6.  Coefficient coding  . . . . . . . . . . . . . . . . . . . . .   6
   7.  Development Repository  . . . . . . . . . . . . . . . . . . .   6
   8.  IANA Considerations . . . . . . . . . . . . . . . . . . . . .   6
   9.  Security Considerations . . . . . . . . . . . . . . . . . . .   6
   10. Acknowledgements  . . . . . . . . . . . . . . . . . . . . . .   7
   11. Informative References  . . . . . . . . . . . . . . . . . . .   7
   Author's Address  . . . . . . . . . . . . . . . . . . . . . . . .   7

1.  Introduction

   This draft describes a proposal for adapting the Opus RFC 6716
   [RFC6716] energy conservation principle to video coding based on a
   pyramid vector quantizer (PVQ) [Pyramid-VQ].  One potential advantage
   of conserving energy of the AC coefficients in video coding is
   preserving textures rather than low-passing them.  Also, by
   introducing a fixed-resolution PVQ-type quantizer, we automatically
   gain a simple activity masking model.

   The main challenge of adapting this scheme to video is that we have a
   good prediction (the reference frame), so we are essentially starting
   from a point that is already on the PVQ hyper-sphere, rather than at
   the origin like in CELT.  Other challenges are the introduction of a
   quantization matrix and the fact that we want the reference (motion
   predicted) data to perfectly correspond to one of the entries in our
   codebook.  This proposal is described in greater details in
   [Perceptual-VQ], as well as in demo [PVQ-demo].

2.  Gain-Shape Coding and Activity Masking

   The main idea behind the proposed video coding scheme is to code
   groups of DCT coefficient as a scalar gain and a unit-norm "shape"
   vector.  A block's AC coefficients may all be part of the same group,
   or may be divided by frequency (e.g. by octave) and/or by
   directionality (horizontal vs vertical).

   It is desirable for a single quality parameter to control the
   resolution of both the gain and the shape.  Ideally, that quality
   parameter should also take into account activity masking, that is,
   the fact that the eye is less sensitive to regions of an image that
   have more details.  According to Jason Garrett-Glaser, the perceptual
   analysis in the x264 encoder uses a resolution proportional to the

Valin                   Expires December 11, 2015               [Page 2]

Internet-Draft                  Video PVQ                      June 2015

   variance of the AC coefficients raised to the power a, with a=0.173.
   For gain-shape quantization, this is equivalent to using a resolution
   of g^(2a), where g is the gain.  We can derive a scalar quantizer
   that follows this resolution:

                                g=Q_g gamma     ,

   where gamma is the gain quantization index, b=1/(1-2*a) and Q_g is
   the gain resolution and main quality parameter.

   An important aspect of the current proposal is the use of prediction.
   In the case of the gain, there is usually a significant correlation
   with the gain of neighboring blocks.  One way to predict the gain of
   a block is to compute the gain of the coefficients obtained through
   intra or inter prediction.  Another way is to use the encoded gain of
   the neighboring blocks to explicitly predict the gain of the current

3.  Householder Reflection

   Let vector x_d denote the (pre-normalization) DCT band to be coded in
   the current block and vector r_d denote the corresponding reference
   (based on intra prediction or motion compensation), the encoder
   computes and encodes the "band gain" g = sqrt(x_d^T x_d).  The
   normalized band is computed as

                                 x = --------- ,
                                     || x_d ||

   with the normalized reference vector r similarly computed based on
   r_d.  The encoder then finds the position and sign of the largest
   component in vector r:

                              m = argmax_i | r_i |
                              s = sign(r_m)

   and computes the Householder reflection that reflects r to -s e_m,
   where e_m is a unit vector that points in the direction of dimension
   m.  The reflection vector is given by

                                 v = r + s e_m .

   The encoder reflects the normalized band to find the unit-norm vector

Valin                   Expires December 11, 2015               [Page 3]

Internet-Draft                  Video PVQ                      June 2015

                                        v^T x
                              z = x - 2 -----  v .
                                        v^T v

   The closer the current band is from the reference band, the closer z
   is from -s e_m.  This can be represented either as an angle, or as a
   coordinate on a projected pyramid.

4.  Angle-Based Encoding

   Assuming no quantization, the similarity can be represented by the

                            theta = arccos(-s z_m) .

   If theta is quantized and transmitted to the decoder, then z can be
   reconstructed as

                    z = -s cos(theta) e_m + sin(theta) z_r ,

   where z_r is a unit vector based on z that excludes dimension m.

   The vector z_r can be quantized using PVQ.  Let y be a vector of
   integers that satisfies

                               sum_i(|y[i]|) = K ,

   with K determined in advance, then the PVQ search finds the vector y
   that maximizes y^T z_r / (y^T y) . The quantized version of z_r is

                                z_rq = ------- .
                                       || y ||

   If we assume that MSE is a good criterion for optimizing the
   resolution, then the angle quantization resolution should be

                                   dg       1        b
                      Q_theta = ---------*----- = ------ .
                                 d(gamma)   g      gamma

   To derive the optimal K we need to consider the normalized distortion
   for a Laplace-distributed variable found experimentally to be

Valin                   Expires December 11, 2015               [Page 4]

Internet-Draft                  Video PVQ                      June 2015

                                  (N-1)^2 + C*(N-1)
                            D_p = ----------------- ,

   with C ~= 4.2.  The distortion due to the gain is

                         D_g = ----------------------- .

   Since PVQ codes N-2 degrees of freedom, its distortion should also be
   (N-2) times the gain distortion, which eventually leads us to the
   optimal number of pulses

                       gamma*sin(theta)       / N + C - 2 \
                   K = ----------------  sqrt | ---------  | .
                               b              \     2     /

   The value of K does not need to be coded because all the variables it
   depends on are known to the decoder.  However, because Q_theta
   depends on the gain, this can lead to unacceptable loss propagation
   behavior in the case where inter prediction is used for the gain.
   This problem can be worked around by making the approximation
   sin(theta)~=theta.  With this approximation, then K depends only on
   the theta quantization index, with no dependency on the gain.
   Alternatively, instead of quantizing theta, we can quantize
   sin(theta) which also removes the dependency on the gain.  In the
   general case, we quantize f(theta) and then assume that
   sin(theta)~=f(theta).  A possible choice of f(theta) is a quadratic
   function of the form:

                         f(theta) = a1 theta - a2 theta.

   where a1 and a2 are two constants satisfying the constraint that
   f(pi/2)=pi/2.  The value of f(theta) can also be predicted, but in
   case where we care about error propagation, it should only be
   predicted from information coded in the current frame.

5.  Bi-prediction

   We can use this scheme for bi-prediction by introducing a second
   theta parameter.  For the case of two (normalized) reference frames
   r1 and r2, we introduce s1=(r1+r2)/2 and s2=(r1-r2)/2.  We start by
   using s1 as a reference, apply the Householder reflection to both x
   and s2, and evaluate theta1.  From there, we derive a second
   Householder reflection from the reflected version of s2 and apply it
   to z.  The result is that the theta2 parameter controls how the

Valin                   Expires December 11, 2015               [Page 5]

Internet-Draft                  Video PVQ                      June 2015

   current image compares to the two reference images.  It should even
   be possible to use this in the case of fades, using two references
   that are before the frame being encoded.

6.  Coefficient coding

   Encoding coefficients quantized with PVQ differs from encoding
   scalar-quantized coefficients from the fact that the sum of the
   coefficients magnitude is known (equal to K).  It is possible to take
   advantage of the known K value either through modeling the
   distribution of coefficient magnitude or by modeling the zero runs.
   In the case of magnitude modeling, the expectation of the magnitude
   of coefficient n is modeled as

                           E(|y_n|) = alpha * ----- ,
                                              N - n

   where K_n is the number of pulses left after encoding coeffients from
   0 to n-1 and alpha depends on the distribution of the coefficients.
   For run-length modeling, the expectation of the position of the next
   non-zero coefficient is given by

                                              N - n
                            E(|run|) = beta * ----- ,

   where beta also models the coefficient distribution.

7.  Development Repository

   The algorithms in this proposal are being developed as part of
   Xiph.Org's Daala project.  The code is available in the Daala git
   repository at <https://git.xiph.org/daala.git>.  See
   <https://xiph.org/daala/> for more information.

8.  IANA Considerations

   This document makes no request of IANA.

9.  Security Considerations

   This draft has no security considerations.

Valin                   Expires December 11, 2015               [Page 6]

Internet-Draft                  Video PVQ                      June 2015

10.  Acknowledgements

   Thanks to Jason Garrett-Glaser, Timothy Terriberry, Greg Maxwell, and
   Nathan Egge for their contribution to this document.

11.  Informative References

              Valin, JM. and TB. Terriberry, "Perceptual Vector
              Quantization for Video Coding", Proceedings of SPIE Visual
              Information Processing and Communication , February 2015,

              Valin, JM., "Daala: Perceptual Vector Quantization (PVQ)",
              November 2014, <https://people.xiph.org/~jm/daala/

              Fischer, T., "A Pyramid Vector Quantizer", IEEE Trans. on
              Information Theory, Vol. 32 pp. 568-583, July 1986.

   [RFC6716]  Valin, JM., Vos, K., and T. Terriberry, "Definition of the
              Opus Audio Codec", RFC 6716, September 2012.

Author's Address

   Jean-Marc Valin
   331 E. Evelyn Avenue
   Mountain View, CA  94041

   Email: jmvalin@jmvalin.ca

Valin                   Expires December 11, 2015               [Page 7]

Html markup produced by rfcmarkup 1.120, available from https://tools.ietf.org/tools/rfcmarkup/