[Docs] [txt|pdf|xml|html] [Tracker] [WG] [Email] [Diff1] [Diff2] [Nits]

Versions: 00 01 04 05 06 07 08 09 10 RFC 7351

Network Working Group                                           E. Wilde
Internet-Draft                                                       EMC
Updates: 5261 (if approved)                             November 7, 2013
Intended status: Informational
Expires: May 11, 2014


                 A Media Type for XML Patch Operations
                        draft-wilde-xml-patch-07

Abstract

   The XML Patch media type "application/xml-patch+xml" defines an XML
   document structure for expressing a sequence of patch operations that
   are applied to an XML document.  The XML Patch document format's
   foundations are defined in RFC 5261, this specification defines a
   document format and a media type registration, so that XML Patch
   documents can be labeled with a media type, for example in HTTP
   conversations.

   In addition to the media type registration, this specification also
   updates RFC 5261 in some aspects, limiting these updates to cases
   where RFC 5261 needed to be fixed, or was hard to understand.

Note to Readers

   This draft should be discussed on the apps-discuss mailing list [1].

   Online access to all versions and files is available on github [2].

Status of this Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at http://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on May 11, 2014.

Copyright Notice



Wilde                     Expires May 11, 2014                  [Page 1]


Internet-Draft                  XML Patch                  November 2013


   Copyright (c) 2013 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.


Table of Contents

   1.  Introduction . . . . . . . . . . . . . . . . . . . . . . . . .  3
   2.  Patch Documents  . . . . . . . . . . . . . . . . . . . . . . .  3
     2.1.  Patch Document Format  . . . . . . . . . . . . . . . . . .  3
     2.2.  Patch Examples . . . . . . . . . . . . . . . . . . . . . .  5
   3.  IANA Considerations  . . . . . . . . . . . . . . . . . . . . .  5
   4.  Security Considerations  . . . . . . . . . . . . . . . . . . .  6
   5.  Open Issues  . . . . . . . . . . . . . . . . . . . . . . . . .  6
   6.  Change Log . . . . . . . . . . . . . . . . . . . . . . . . . .  7
     6.1.  From -06 to -07  . . . . . . . . . . . . . . . . . . . . .  7
     6.2.  From -05 to -06  . . . . . . . . . . . . . . . . . . . . .  7
     6.3.  From -04 to -05  . . . . . . . . . . . . . . . . . . . . .  7
     6.4.  From -03 to -04  . . . . . . . . . . . . . . . . . . . . .  7
     6.5.  From -02 to -03  . . . . . . . . . . . . . . . . . . . . .  8
     6.6.  From -01 to -02  . . . . . . . . . . . . . . . . . . . . .  8
     6.7.  From -00 to -01  . . . . . . . . . . . . . . . . . . . . .  8
   7.  References . . . . . . . . . . . . . . . . . . . . . . . . . .  8
     7.1.  Normative References . . . . . . . . . . . . . . . . . . .  8
     7.2.  Non-Normative References . . . . . . . . . . . . . . . . .  9
   Appendix A.  Implementation Hints  . . . . . . . . . . . . . . . . 10
     A.1.  Matching Namespaces  . . . . . . . . . . . . . . . . . . . 10
     A.2.  Patching Namespaces  . . . . . . . . . . . . . . . . . . . 11
   Appendix B.  Implementation Status . . . . . . . . . . . . . . . . 13
   Appendix C.  ABNF for RFC 5261 . . . . . . . . . . . . . . . . . . 13
   Appendix D.  Acknowledgements  . . . . . . . . . . . . . . . . . . 14
   Author's Address . . . . . . . . . . . . . . . . . . . . . . . . . 14










Wilde                     Expires May 11, 2014                  [Page 2]


Internet-Draft                  XML Patch                  November 2013


1.  Introduction

   The Extensible Markup Language (XML) [RFC3023] is a common format for
   the exchange and storage of structured data.  HTTP PATCH [RFC5789]
   extends HTTP [RFC2616] with a method to perform partial modifications
   to resources.  HTTP PATCH requires that patch documents be sent along
   with the request, and it is therefore useful for there to be
   standardized patch document formats (identified by media types) for
   popular media types.

   The XML Patch media type "application/xml-patch+xml" is an XML
   document structure for expressing a sequence of operations to apply
   to a target XML document, suitable for use with the HTTP PATCH
   method.  Servers can freely choose which patch formats they want to
   accept, and "application/xml-patch+xml" could be a simple default
   format that can be used unless a server decides to use a different
   (maybe more sophisticated) patch format for XML.

   The format for patch documents is based on the XML Patch Framework
   defined in RFC 5261 [RFC5261].  While RFC 5261 does define a concrete
   syntax as well as the media type "application/patch-ops-error+xml"
   for error documents, it only defines XML Schema (XSD)
   [W3C.REC-xmlschema-1-20041028] types for patch operations.  The
   concrete document format and the media type for patch operations are
   defined in an XSD defined in this specification.

   This specification relies on RFC 5261, but also requires that the
   known errata are taken into account.  The main reason for the errata
   are the problematic ways in which RFC 5261 relies on XPath as the
   expression language for selecting the location of a patch, while at
   the same time XPath's data model does not contain sufficient
   information to determine whether such a selector indeed can be used
   for a patch operation, or should result in an error.  Specifically,
   the problem occurs with namespaces, where XPath does not expose
   namespace declaration attributes, while the patch model needs them to
   determine whether a namespace patch is allowed or not.  Appendix A
   contains more information about the general problem, and the errata
   themselves are available through the regular IETF errata system.


2.  Patch Documents

2.1.  Patch Document Format

   The XML patch document format is based on a simple schema that uses a
   "patch" element as the document element, and allows an arbitrary
   sequence of "add", "remove", and "replace" elements as the children
   of the document element.  These children follow the semantics defined



Wilde                     Expires May 11, 2014                  [Page 3]


Internet-Draft                  XML Patch                  November 2013


   in RFC 5261, which means that each element is treated as an
   individual patch operation, and the result of each patch operation is
   a patched XML document that is the target XML document for the next
   patch operation.

   The following example patch document uses the example from RFC 5261
   section A.18; it uses a "patch" element and a new XML namespace.  It
   shows the general structure of an XML patch document, as well as an
   example of each operation.
   <p:patch xmlns="urn:ietf:params:xml:ns:xxx"
            xmlns:y="urn:ietf:params:xml:ns:yyy"
            xmlns:p="urn:ietf:rfc:XXXX">
       <p:add sel="doc/elem[@a='foo']">
           <!-- This is a new child -->
           <child id="ert4773">
               <y:node/>
           </child>
       </p:add>
       <p:replace sel="doc/note/text()">Patched doc</p:replace>
       <p:remove sel="*/elem[@a='bar']/y:child" ws="both"/>
       <p:add sel="*/elem[@a='bar']" type="@b">new attr</p:add>
   </p:patch>

   As this example demonstrates, both the document element "patch" and
   the patch operation elements are in the same XML namespace.  This is
   the result of RFC 5261 only defining types for the patch operation
   elements, which then can be reused in schemas to define concrete
   patch elements.

   RFC 5261 defines an XML Schema (XSD) [W3C.REC-xmlschema-1-20041028]
   for the patch operation types.  The following schema for the XML
   Patch media type is based on the types defined in RFC 5261, which are
   imported as "rfc5261.xsd" in the following schema.  The schema
   defines a "patch" document element, and then allows an unlimited (and
   possibly empty) sequence of the "add", "remove", and "replace"
   operation elements, which are directly based on the respective types
   from the schema defined in RFC 5261.














Wilde                     Expires May 11, 2014                  [Page 4]


Internet-Draft                  XML Patch                  November 2013


   <xs:schema targetNamespace="urn:ietf:rfc:XXXX"
              xmlns:xs="http://www.w3.org/2001/XMLSchema">
       <xs:import schemaLocation="rfc5261.xsd"/>
       <xs:element name="patch">
           <xs:complexType>
               <xs:choice minOccurs="0" maxOccurs="unbounded">
                   <xs:element name="add" type="add"/>
                   <xs:element name="remove" type="remove"/>
                   <xs:element name="replace" type="replace"/>
               </xs:choice>
           </xs:complexType>
       </xs:element>
   </xs:schema>

2.2.  Patch Examples

   Since the semantics of the XML patch operations are defined by RFC
   5261, please refer to the numerous examples in that specification for
   concrete XML patch document examples.  Most importantly, the examples
   in RFC 5261 can be taken literally as examples for the XML Patch
   media type, as long as it is assumed that the XML namespace for the
   operation elements in these examples is the URI "urn:ietf:rfc:XXXX".


3.  IANA Considerations

   The Internet media type [RFC6838] for an XML Patch Document is
   application/xml-patch+xml.

      Type name: application

      Subtype name: xml-patch+xml

      Required parameters: none

      Optional parameters:

         charset: Same as charset parameter for the media type
         "application/xml" as specified in RFC 3023 [RFC3023].

      Encoding considerations: Same as encoding considerations of media
      type "application/xml" as specified in RFC 3023 [RFC3023].

      Security considerations: This media type has all of the security
      considerations described in RFC 3023 [RFC3023], RFC 5261
      [RFC5261], and RFC 3470 [RFC3470], plus those listed in Section 4.





Wilde                     Expires May 11, 2014                  [Page 5]


Internet-Draft                  XML Patch                  November 2013


      Interoperability considerations: N/A

      Published specification: RFC XXXX

      Applications that use this media type: Applications that
      manipulate XML documents.

      Additional information:

         Magic number(s): N/A

         File extension(s): XML documents often use ".xml" as the file
         extension, and this media type does not propose a specific
         extension other than this generic one.

         Macintosh file type code(s): TEXT

      Person & email address to contact for further information: Erik
      Wilde <erik.wilde@emc.com>

      Intended usage: COMMON

      Restrictions on usage: none

      Author: Erik Wilde <erik.wilde@emc.com>

      Change controller: IETF


4.  Security Considerations

   Parsing XML may entail including information from external sources
   through XML's mechanism of external entities.  Implementations
   therefore should be aware of the fact that standard parsers may
   resolve external entities, and thus include external information as a
   result of applying patch operations to an XML document.


5.  Open Issues

   Note to RFC Editor: Please remove this section before publication.

   o  "ncname" in the XSD grammar is defined as "\i\c*", but so far has
      been translated into "1*%x00-ffffffff" in the ABNF grammar.
      Ideally, the grammar should reflect how XSD defines these multi-
      character escapes, but they map into rather complicated character
      ranges in XML itself (such as
      http://www.w3.org/TR/xml/#NT-Letter).



Wilde                     Expires May 11, 2014                  [Page 6]


Internet-Draft                  XML Patch                  November 2013


6.  Change Log

   Note to RFC Editor: Please remove this section before publication.

6.1.  From -06 to -07

   o  Moving category back to "info" (from "std"), because the errata to
      RFC 5261 are now approved separately.

   o  Removing the section with "Updates to RFC 5261" because that's
      done via errata now.

   o  Adding reference to RFC 3470 to "Security Considerations".

   o  Updating the ABNF to correctly only allow lowercase characters in
      the string parts.

6.2.  From -05 to -06

   o  Updating "Implementation Status" section to refer to RFC 6982
      [RFC6982].

   o  Properly listing "charset" as an optional media type parameter
      (was ill-formatted before).

   o  Adding corrections from Tony Hansen's review, including document
      structure (section/appendix order), and improvements of the ABNF
      grammar.

   o  Moving category back to "std" (from "info"), because that's was
      needed for an RFC that is updating an RFC that has been published
      on the standards track.

6.3.  From -04 to -05

   o  Improved formatting of XML/XSD and ABNF code.

   o  Moving category from "std" to "info" (intended to become an
      informational RFC).

6.4.  From -03 to -04

   o  Added text and section "Updates to RFC 5261" about updating RFC
      5261 (instead of relying on errata).







Wilde                     Expires May 11, 2014                  [Page 7]


Internet-Draft                  XML Patch                  November 2013


6.5.  From -02 to -03

   o  Added section on "Implementation Status" (Appendix B).

   o  Improved "Implementation Hints" (Appendix A).

6.6.  From -01 to -02

   o  Textual edits.

   o  Added section on "Implementation Hints" (Appendix A).

6.7.  From -00 to -01

   o  Removed Mark Nottingham from author list.

   o  Changed media type name to application/xml-patch+xml (added suffix
      per draft-ietf-appsawg-media-type-suffix-regs)

   o  Added ABNF grammar derived from XSD (Appendix C)


7.  References

7.1.  Normative References

   [RFC2045]  Freed, N. and N. Borenstein, "Multipurpose Internet Mail
              Extensions (MIME) Part One: Format of Internet Message
              Bodies", RFC 2045, November 1996.

   [RFC2046]  Freed, N. and N. Borenstein, "Multipurpose Internet Mail
              Extensions (MIME) Part Two: Media Types", RFC 2046,
              November 1996.

   [RFC3023]  Murata, M., St. Laurent, S., and D. Kohn, "XML Media
              Types", RFC 3023, January 2001.

   [RFC3470]  Hollenbeck, S., Rose, M., and L. Masinter, "Guidelines for
              the Use of Extensible Markup Language (XML) within IETF
              Protocols", BCP 70, RFC 3470, January 2003.

   [RFC5261]  Urpalainen, J., "An Extensible Markup Language (XML) Patch
              Operations Framework Utilizing XML Path Language (XPath)
              Selectors", RFC 5261, September 2008.

   [RFC6838]  Freed, N., Klensin, J., and T. Hansen, "Media Type
              Specifications and Registration Procedures", BCP 13,
              RFC 6838, January 2013.



Wilde                     Expires May 11, 2014                  [Page 8]


Internet-Draft                  XML Patch                  November 2013


7.2.  Non-Normative References

   [RFC2616]  Fielding, R., Gettys, J., Mogul, J., Frystyk, H.,
              Masinter, L., Leach, P., and T. Berners-Lee, "Hypertext
              Transfer Protocol -- HTTP/1.1", RFC 2616, June 1999.

   [RFC5789]  Dusseault, L. and J. Snell, "PATCH Method for HTTP",
              RFC 5789, March 2010.

   [RFC6982]  Sheffer, Y. and A. Farrel, "Improving Awareness of Running
              Code: The Implementation Status Section", RFC 6982,
              July 2013.

   [W3C.REC-DOM-Level-3-Core-20040407]
              Robie, J., Wood, L., Champion, M., Hegaret, P., Nicol, G.,
              Le Hors, A., and S. Byrne, "Document Object Model (DOM)
              Level 3 Core Specification", World Wide Web Consortium
              Recommendation REC-DOM-Level-3-Core-20040407, April 2004,
              <http://www.w3.org/TR/2004/REC-DOM-Level-3-Core-20040407>.

   [W3C.REC-xml-20081126]
              Sperberg-McQueen, C., Yergeau, F., Paoli, J., Maler, E.,
              and T. Bray, "Extensible Markup Language (XML) 1.0 (Fifth
              Edition)", World Wide Web Consortium Recommendation REC-
              xml-20081126, November 2008,
              <http://www.w3.org/TR/2008/REC-xml-20081126>.

   [W3C.REC-xml-names-20091208]
              Hollander, D., Layman, A., Bray, T., Tobin, R., and H.
              Thompson, "Namespaces in XML 1.0 (Third Edition)", World
              Wide Web Consortium Recommendation REC-xml-names-20091208,
              December 2009,
              <http://www.w3.org/TR/2009/REC-xml-names-20091208>.

   [W3C.REC-xmlschema-1-20041028]
              Thompson, H., Beech, D., Maloney, M., and N. Mendelsohn,
              "XML Schema Part 1: Structures Second Edition", World Wide
              Web Consortium Recommendation REC-xmlschema-1-20041028,
              October 2004,
              <http://www.w3.org/TR/2004/REC-xmlschema-1-20041028>.

   [W3C.REC-xpath-19991116]
              DeRose, S. and J. Clark, "XML Path Language (XPath)
              Version 1.0", World Wide Web Consortium
              Recommendation REC-xpath-19991116, November 1999,
              <http://www.w3.org/TR/1999/REC-xpath-19991116>.

   [W3C.REC-xpath20-20101214]



Wilde                     Expires May 11, 2014                  [Page 9]


Internet-Draft                  XML Patch                  November 2013


              Boag, S., Berglund, A., Kay, M., Simeon, J., Robie, J.,
              Chamberlin, D., and M. Fernandez, "XML Path Language
              (XPath) 2.0 (Second Edition)", World Wide Web Consortium
              Recommendation REC-xpath20-20101214, December 2010,
              <http://www.w3.org/TR/2010/REC-xpath20-20101214>.

URIs

   [1]  <https://www.ietf.org/mailman/listinfo/apps-discuss>

   [2]  <https://github.com/dret/I-D/tree/master/xml-patch>


Appendix A.  Implementation Hints

   This section is informative.  It described some issues that might be
   interesting for implementers, but it might also be interesting for
   users of XML Patch that want to understand some of the differences
   between standard XPath 1.0 processing, and the processing model of
   selectors in RFC 5261.

A.1.  Matching Namespaces

   RFC 5261 defines standard rules for matching prefixed names in
   expressions: Any prefixes are interpreted according to the namespace
   bindings of the diff document (the document that the expression is
   applied against).  This means that each prefixed name can be
   interpreted in the context of the diff document.

   For unprefixed names in expressions, the rules depart from XPath 1.0
   [W3C.REC-xpath-19991116].  XPath 1.0 defines that unprefixed names in
   expressions match namespace-less names (i.e., there is no "default
   namespace" for names used in XPath 1.0 expressions).  RFC 5261
   requires, however, that unprefixed names in expressions must use the
   default namespace of the diff document (if there is one).  This means
   that it is not possible to simply take a selector from a patch
   document and evaluate it in the context of the diff document
   according to the rules of XPath 1.0, because this would interpret
   unprefixed names incorrectly.  As a consequence, it is not possible
   to simply take an XPath 1.0 processor and evaluate XMPL Patch
   selectors in the context of the diff document.

   As an extension of XPath 1.0's simple model, XPath 2.0
   [W3C.REC-xpath20-20101214] specifies different processing rules for
   unprefixed names: They are matched against the URI of the "default
   element/type namespace", which is defined as part of an expression's
   static context.  In some XPath 2.0 applications, this can be set;
   XSLT 2.0 for example has the ability to define an "xpath-default-



Wilde                     Expires May 11, 2014                 [Page 10]


Internet-Draft                  XML Patch                  November 2013


   namespace", which then will be used to match unprefixed names in
   expressions.  Thus, by using an XPath 2.0 implementation that allows
   to set this URI, and setting it to the default namespace of the diff
   document (or leaving it undefined if there is no such default
   namespace), it is possible to use an out-of-the-box XPath 2.0
   implementation for evaluating XML Patch selectors.

   Please keep in mind, however, that evaluating selectors is only one
   part of applying patches.  When it comes to applying the actual patch
   operation, neither XPath 1.0 nor XPath 2.0 are sufficient because
   they do not preserve some of the information from the XML syntax
   (specifically: namespace declarations) that is required to correctly
   apply patch operations.  The following section describes this issue
   in more detail.

   Please note that RFC 5261's Section 4.2.2 on namespace matching
   explains XPath 2.0's rules incorrectly
   <http://tools.ietf.org/html/rfc5261#section-4.2.2>.  For this reason,
   an erratum is available for Section 4.2.2 of RFC 5261.

A.2.  Patching Namespaces

   One of the issues when patching namespaces based on XPath is that
   XPath exposes namespaces differently than the XML 1.0
   [W3C.REC-xml-20081126] syntax for XML Namespaces
   [W3C.REC-xml-names-20091208].  In the XML syntax, a namespace is
   declared with an attribute using the reserved name or prefix "xmlns",
   and this results in this namespace being available recursively
   through the document tree.  In XPath, the namespace declaration is
   not exposed as an attribute (i.e., the attribute, although
   syntactically an XML attribute, is not accessible in XPath), but the
   resulting namespace nodes are exposed recursively through the tree.

   RFC 5261 uses the terms "namespace declaration" and "namespace"
   almost interchangeably, but it is important to keep in mind that the
   namespace declaration is an XML syntax construct that is unavailable
   in XPath, while the namespace itself is a logical construct that is
   not visible in the XML syntax, but a result of a namespace
   declaration.  The intent of RFC 5261 is to patch namespaces as if
   namespace declarations were patched, and thus it only allows patching
   namespace nodes on the element nodes where the namespace has been
   declared.

   Patching namespaces in XML Patch is supposed to "emulate" the effect
   of actually changing the namespace declaration (which is why a
   namespace can only be patched at the element where it has been
   declared).  Therefore, when patching a namespace, even though XPath's
   "namespace" axis is used, implementations have to make sure that not



Wilde                     Expires May 11, 2014                 [Page 11]


Internet-Draft                  XML Patch                  November 2013


   only the single selected namespace node is being patched, but that
   all namespaces nodes resulting from the namespace declaration of this
   namespace are also patched accordingly.

   This means that an implementation might have to descend into the
   tree, matching all namespace nodes with the selected prefix/URI pair
   recursively, until it encounters leaf elements or namespace
   declarations with the same prefix it is patching.  Determining this
   requires access to the diff document beyond XPath, because in XPath
   itself namespace declarations are not represented, and thus such a
   recursive algorithm wouldn't know when to stop.  Consider the
   following document:
   <x xmlns:a="tag:42">
       <y xmlns:a="tag:42"/>
   </x>

   If this document is patched with a selector of /x/namespace::a, then
   only the namespace node on element x should be patched, even though
   the namespace node on element y has the same prefix/URI combination
   as the one on element x.  However, determining that the repeated
   namespace declaration was present at all on element y is impossible
   when using XPath alone, which means that implementations must have an
   alternative way to determine the difference between the document
   above, and this one:
   <x xmlns:a="tag:42">
       <y/>
   </x>

   In this second example, patching with a selector of /x/namespace::a
   should indeed change the namespace nodes on elements x and y, because
   they both have been derived from the same namespace declaration.

   The conclusion of these considerations is that for implementing XML
   Patch, access closer to the XML syntax (specifically: access to
   namespace declarations) is necessary.  As a result, implementations
   attempting to exclusively use the XPath model for implementing XML
   Patch will fail to correctly address certain edge cases (such as the
   one shown above).

   Note that XPath's specific limitations do not mean that it is
   impossible to use XML technologies other than XPath.  The Document
   Object Model (DOM) [W3C.REC-DOM-Level-3-Core-20040407], for example,
   does expose namespace declaration attributes as regular attributes in
   the document tree, and thus could be used to differentiate between
   the two variants shown above.

   Please note that RFC 5261's Section 4.4.3 on replacing namespaces
   mixes the terms "namespace declaration" and "namespace".  For this



Wilde                     Expires May 11, 2014                 [Page 12]


Internet-Draft                  XML Patch                  November 2013


   reason, an erratum is available for Section 4.4.3 of RFC 5261.


Appendix B.  Implementation Status

   Note to RFC Editor: Please remove this section before publication.

   This section records the status of known implementations of the
   protocol defined by this specification at the time of posting of this
   Internet-Draft, and is based on a proposal described in RFC 6982
   [RFC6982].  The description of implementations in this section is
   intended to assist the IETF in its decision processes in progressing
   drafts to RFCs.  Please note that the listing of any individual
   implementation here does not imply endorsement by the IETF.
   Furthermore, no effort has been spent to verify the information
   presented here that was supplied by IETF contributors.  This is not
   intended as, and must not be construed to be, a catalog of available
   implementations or their features.  Readers are advised to note that
   other implementations may exist.

   According to RFC 6982, "this will allow reviewers and working groups
   to assign due consideration to documents that have the benefit of
   running code, which may serve as evidence of valuable experimentation
   and feedback that have made the implemented protocols more mature.
   It is up to the individual working groups to use this information as
   they see fit".

      EMC: EMC's IIG unit has implemented the selector part of the
      specification, which is the trickiest part (see Appendix A.1 for
      an explanation).  By reusing an existing XPath 1.0 implementation
      and changing it to match the changed default namespace processing
      model, the required behavior is fairly easy to implement.  This
      does, however, require that the implementation is available in
      source code, and also does require some changes to the
      implementation's code.  The resulting implementation is closed
      source and will be made available, if released, as part of EMC's
      XML database product xDB
      <http://www.emc.com/products/detail/software2/documentum-xdb.htm>.


Appendix C.  ABNF for RFC 5261

   RFC 5261 [RFC5261] does not contain an ABNF grammar for the allowed
   subset of XPath expressions, but includes an XSD-based grammar in its
   type definition for operation types).  In order to make
   implementation easier, this appendix contains an ABNF grammar that
   has been derived from the XSD expressions in RFC 5261.  In the
   following grammar, "xpath" is the definition for the allowed XPath



Wilde                     Expires May 11, 2014                 [Page 13]


Internet-Draft                  XML Patch                  November 2013


   expressions for remove and replace operations, and "xpath-add" is the
   definition for the allowed XPath expressions for add operations.  The
   names of all grammar productions are the ones used in the XSD-based
   grammar of RFC 5261.
anychar    =  %x00-ffffffff
ncname     =  1*%x00-ffffffff
qname      =  [ ncname ":" ] ncname
aname      =  "@" qname
pos        =  "[" 1*DIGIT "]"
attr       =  ( "[" aname "='" 0*anychar "']" ) /
              ( "[" aname "=" DQUOTE 0*anychar DQUOTE "]" )
valueq     =  "[" ( qname / "." ) "=" DQUOTE 0*anychar DQUOTE "]"
value      =  ( "[" ( qname / "." ) "='" 0*anychar "']" ) / valueq
cond       =  attr / value / pos
step       =  ( qname / "*" ) 0*cond
piq        =  %x70.72.6f.63.65.73.73.69.6e.67.2d.69.6e.73.74.72.75.63.74.69.6f.6e
              ; "processing-instruction", case-sensitive
              "(" [ DQUOTE ncname DQUOTE ] ")"
pi         =  ( %x70.72.6f.63.65.73.73.69.6e.67.2d.69.6e.73.74.72.75.63.74.69.6f.6e
              ; "processing-instruction", case-sensitive
              "(" [ "'" ncname "'" ] ")" ) / piq
id         =  ( %x69.64 ; "id", case-sensitive
              "(" [ "'" ncname "'" ] ")" ) /
              ( %x69.64 ; "id", case-sensitive
              "(" [ DQUOTE ncname DQUOTE ] ")" )
com        =  %x63.6f.6d.6d.65.6e.74 ; "comment", case-sensitive
              "()"
text       =  %x74.65.78.74 ; "text", case-sensitive
              "()"
nspa       =  %x6e.61.6d.65.73.70.61.63.65; "namespace", case-sensitive
              "::" ncname
cnodes     =  ( text / com / pi ) [ pos ]
child      =  cnodes / step
last       =  child / aname / nspa
xpath      =  [ "/" ] ( ( id [ 0*( "/" step ) "/" last ] ) /
              ( 0*( step "/" ) last ) )
xpath-add  =  [ "/" ] ( ( id [ 0*( "/" step ) "/" child ] ) /
              ( 0*( step "/" ) child ) )


Appendix D.  Acknowledgements

   Thanks for comments and suggestions provided by Bas de Bakker, Tony
   Hansen, Bjoern Hoehrmann, and Julian Reschke.







Wilde                     Expires May 11, 2014                 [Page 14]


Internet-Draft                  XML Patch                  November 2013


Author's Address

   Erik Wilde
   EMC
   6801 Koll Center Parkway
   Pleasanton, CA 94566
   U.S.A.

   Phone: +1-925-6006244
   Email: erik.wilde@emc.com
   URI:   http://dret.net/netdret/








































Wilde                     Expires May 11, 2014                 [Page 15]


Html markup produced by rfcmarkup 1.129b, available from https://tools.ietf.org/tools/rfcmarkup/