[Docs] [txt|pdf|xml|html] [Tracker] [Email] [Diff1] [Diff2] [Nits]

Versions: 00 01 02

Operations Area Working Group                                  S. Winter
Internet-Draft                                                   RESTENA
Intended status: Standards Track                           July 06, 2015
Expires: January 7, 2016


A Configuration File Format for Extensible Authentication Protocol (EAP)
                              Deployments
                  draft-winter-opsawg-eap-metadata-02

Abstract

   This document specifies a YANG module and derived XML and JSON file
   formats for transfering configuration information of deployments of
   the Extensible Authentication Protocol (EAP).  Such configuration
   files are meant to be discovered, consumed and used by EAP supplicant
   software to achieve secure and automatic EAP configuration on the
   consuming device.

Status of This Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at http://datatracker.ietf.org/drafts/current/.

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on January 7, 2016.

Copyright Notice

   Copyright (c) 2015 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.




Winter                   Expires January 7, 2016                [Page 1]


Internet-Draft          EAP Metadata File Format               July 2015


Table of Contents

   1.  Introduction  . . . . . . . . . . . . . . . . . . . . . . . .   2
     1.1.  Problem Statement . . . . . . . . . . . . . . . . . . . .   2
     1.2.  Other Approaches  . . . . . . . . . . . . . . . . . . . .   4
     1.3.  Requirements Language . . . . . . . . . . . . . . . . . .   4
     1.4.  Terminology . . . . . . . . . . . . . . . . . . . . . . .   4
   2.  YANG module for EAP Metadata  . . . . . . . . . . . . . . . .   4
     2.1.  Location of the YANG module and derived XML Schema  . . .   4
     2.2.  Description of YANG Module Elements . . . . . . . . . . .   4
       2.2.1.  Overall structure . . . . . . . . . . . . . . . . . .   4
       2.2.2.  The 'AuthenticationMethods' container . . . . . . . .   5
       2.2.3.  The 'ProviderInfo' container  . . . . . . . . . . . .   9
     2.3.  Internationalisation / Multi-language support . . . . . .  10
   3.  Derivation of formats from YANG source  . . . . . . . . . . .  11
   4.  Issuer Authentication, Integrity Protection and Encryption of
       EAP Metadata configuration files  . . . . . . . . . . . . . .  11
   5.  XML Farget Format: File Discovery . . . . . . . . . . . . . .  11
     5.1.  By MIME-Type: application/eap-config-xml  . . . . . . . .  11
     5.2.  By filename extension: .eap-config-xml  . . . . . . . . .  11
     5.3.  By network location: SCAD . . . . . . . . . . . . . . . .  12
   6.  Design Decisions  . . . . . . . . . . . . . . . . . . . . . .  12
     6.1.  Why YANG and not directly XML, JSON or $FOO?  . . . . . .  12
     6.2.  Shallow vs. Deep definition of EAP method properties  . .  12
     6.3.  EAP tunneling inside EAP tunnels  . . . . . . . . . . . .  12
     6.4.  Placement of 'OuterIdentity' inside
           'AuthenticationMethod'  . . . . . . . . . . . . . . . . .  12
   7.  Implementation Status . . . . . . . . . . . . . . . . . . . .  12
   8.  Security Considerations . . . . . . . . . . . . . . . . . . .  15
   9.  IANA Considerations . . . . . . . . . . . . . . . . . . . . .  15
   10. Contributors  . . . . . . . . . . . . . . . . . . . . . . . .  16
   11. References  . . . . . . . . . . . . . . . . . . . . . . . . .  16
     11.1.  Normative References . . . . . . . . . . . . . . . . . .  16
     11.2.  Informative References . . . . . . . . . . . . . . . . .  16
   Appendix A.  Appendix A: MIME Type Registration Template  . . . .  18

1.  Introduction

1.1.  Problem Statement

   The IETF has produced the Extensible Authentication Protocol (EAP,
   [RFC3748] and numerous EAP methods (for example EAP-TTLS [RFC5281],
   EAP-TLS [RFC5216] and EAP-pwd [RFC5931]); the methods have many
   properties which need to be setup on the EAP server and matched as
   configuration items on the EAP peer for a secure EAP deployment.

   Setting up these configuration items is comparatively easy if the
   end-user devices which implement the EAP peer functionality are under



Winter                   Expires January 7, 2016                [Page 2]


Internet-Draft          EAP Metadata File Format               July 2015


   central administrative control, e.g. in closed enterprise
   environments.  Group policies or device provisioning by the IT
   department can push the settings to user devices.

   In other environments, for example "BYOD" scenarios where users bring
   their own devices which are not under enterprise control, or in EAP-
   based WISP environments (see e.g. [HS20] and
   [I-D.wierenga-ietf-eduroam]) where it is not desired neither for the
   ISP nor for his user that the device control is in the ISPs hands,
   configuration of EAP is significantly harder as it has to be done by
   potentially very non-technical end users.

   Correct configuration of all EAP deployment parameters is required to
   make the resulting authentications

   o  functional (i.e. the end user can authenticate to an EAP server at
      all)

   o  secure (i.e. the end user device can unambiguously authenticate
      the EAP server prior to releasing any sensitive client-side
      credentials)

   o  privacy-preserving (i.e. the end user is able to conceal his
      username from the EAP authenticator)

   It would be desirable to be able to convey the EAP configuration
   information of a deployment in a machine parseable way to the end-
   user device, so that all the gory details need not be known/
   understood by the user.  Instead, the EAP peer software on the device
   could consume the configuration information and set up all EAP
   authentication details automatically.

   However, there is currently no standard way of communicating
   configuration parameters about an EAP setup to the EAP peer.

   This specification defines such file formats for EAP configuration
   metadata.  The source definition is a YANG module which allows for
   automatic derivation of XML and JSON formats.

   The specification allows for unique identification of an EAP identity
   provider by scoping it into a namespace and giving it a unique name
   inside that namespace.  Using this unique identification, other
   configuration files (which e.g. detail the wireless media properties
   of an Enterprise Wi-Fi setup) can then refer to this particular
   instance of EAP identity information as authentication source.  The
   contents of the EAP configuration file may also be an embedded part
   of those other configuration files.




Winter                   Expires January 7, 2016                [Page 3]


Internet-Draft          EAP Metadata File Format               July 2015


1.2.  Other Approaches

   Device manufacturers sometimes have developed their own proprietary
   configuration formats, examples include Apple's "mobileconfig" (MIME
   type application/x-apple-aspen-config), Microsoft's XML schemata for
   EAP methods for use with the command-line "netsh" tool, or Intel's
   "PRO/Set Wireless" binary configuration files.  The multitude of
   proprietary file formats and their different levels of richness in
   expression of EAP details create a very heterogenous and non-
   interoperable landscape.

   New devices which would like to benefit from machine-parseable EAP
   configuration currently either have to choose to follow a
   competitor's approach and use that competitor's file format or have
   to develop their own.  This situation is very unsatisfactory.

1.3.  Requirements Language

   In this document, several words are used to signify the requirements
   of the specification.  The key words "MUST", "MUST NOT", "REQUIRED",
   "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY",
   and "OPTIONAL" in this document are to be interpreted as described in
   RFC 2119.  [RFC2119]

1.4.  Terminology

2.  YANG module for EAP Metadata

2.1.  Location of the YANG module and derived XML Schema

   The schema files are currently hosted on this location:

   o  YANG module: https://www.supplicants.net/site/standardisation/eap-
      metadata-02.yang

   o  XML Schema: https://www.supplicants.net/site/standardisation/eap-
      metadata-02.xml

2.2.  Description of YANG Module Elements

2.2.1.  Overall structure

   The root element is the container 'EAPIdentityProviderList', which
   contains a list of 'EAPIdentityProvider' elements; these carry the
   actual EAP configuration information for this identity provider.  In
   most practical applications, the 'EAPIdentityProviderList' will
   contain only a single element; a longer list can be used for metadata




Winter                   Expires January 7, 2016                [Page 4]


Internet-Draft          EAP Metadata File Format               July 2015


   transfers between systems or to allow users to select from a set of
   providers in one file.

   The global uniqueness of each 'EAPIdentityProvider' is ensured by the
   combination of the two leafs 'NameIDFormat' which provides a
   namespace identifier, and 'ID' which specifies the unique name inside
   the namespace.  The other leafs and containers in the
   'EAPIdentityProvider' list are:

   o  zero or one 'ValidUntil' date-and-time timestamp with an
      indication of possible expiry of the information in the
      configuration file.  EAP peers importing the configuration file
      can use this information for example to re-assess whether the
      account is still valid (e.g. if the ValidUntil timestamp has
      passed, and authentication attempts consistently fail, the
      supplicant should consider the information stale and ask the user
      to verify his access authorisation with the EAP identity provider)

   o  exactly one 'AuthenticationMethods' container with a list of EAP
      methods which the EAPIdentityProvider supports.  This container is
      described in more detail in section Section 2.2.2

   o  zero or one 'ProviderInfo' container can provide additional
      information about the EAPIdentityProvider, e.g. a logo to allow
      visual identification of the provider to the user in a user
      interface, or Acceptable Use Policies pertaining to the use of
      this EAP identity.  This element is described in more detail in
      section Section 2.2.3

2.2.2.  The 'AuthenticationMethods' container

   'AuthenticationMethods' contains a sequence of 'AuthenticationMethod'
   groupings.  Each such grouping specifies the properties of one
   supported authentication method of an EAPIdentityProvider.  The
   content of this grouping is enumerated in section Section 2.2.2.1 The
   set of configuration parameters specified in the grouping depends on
   the particular EAP method to be configured.

   For instance, EAP-PWD [RFC5931] does not require any server
   certificate parameters; EAP-FAST and TEAP are the only ones making
   use of Protected Access Credential (PAC) provisioning.  On the other
   hand, properties such as outer ("anonymous") identity or the need for
   a trusted root Certification Authority are common to several EAP
   methods.  The server- and client-side credential types of EAP methods
   are defined as a flat list of elements to choose from (see
   'ServerSideCredential' and 'ClientSideCredential' below); see section
   Section 6.2 for a rationale.




Winter                   Expires January 7, 2016                [Page 5]


Internet-Draft          EAP Metadata File Format               July 2015


   Where the sequence of 'AuthenticationMethod' groupings contains more
   than one element, the order of appearance in the file indicates the
   server operator's preference for the supported EAP types; occurences
   earlier in the file indicate a more preferred authentication method.

   When a consuming device receives multiple 'AuthenticationMethod'
   groupings inside 'AuthenticationMethods', it should attempt to
   install more preferred methods first.  During interactive
   provisioning of EAP properties, if the configuration information for
   a preferred method is insufficient (e.g. the 'AuthenticationMethod'
   is EAP-TLS, but the configuration file does not contain the client
   certificate/private key and the device's credential store is not pre-
   loaded with the client's certificate), the device should query
   whether this more preferred method should be used (requiring the user
   to supplement the missing data) or whether a less-preferred method
   should be configured instead.  In non-interactive provisioning
   scenarios, all methods should be tried non-interactively in order
   until one method can be installed; if no method can be installed in a
   fully automated way, provisioning is aborted.

2.2.2.1.  Authentication Method Properties

   The 'AuthenticationMethod' grouping contains

   o  exactly one 'EAPMethod' leaf, which is an enumerated integer of
      the EAP method identifier as assigned by IANA (typedef eap-method)

   o  zero or one container 'ServerSideCredential' which defines means
      to authenticate the EAP server to the EAP peer (for a list of the
      elements comprising this container, see section Section 2.2.2.2)

   o  zero or one container 'ClientSideCredential' which defines means
      to authenticate the EAP peer to the EAP server (for a list of the
      elements comprising this container, see section Section 2.2.2.3)

   o  zero or more 'InnerAuthenticationMethod' lists.  Occurence of this
      list indicates that a tunneled EAP method is in use, and that
      further server-side and/or client-side credentials are defined
      inside the tunnel.  The presence of more than one
      'InnerAuthenticationMethod' indicates that EAP Method Chaining is
      in use, i.e. that several inner EAP methods are to be executed in
      sequence inside the tunnel.  The order of occurence of the inner
      EAP methods defines the chaining order of the methods.

   The 'InnerAuthenticationMethod' list itself contains the same
   'EAPMethod', 'ServerSideCredentials' and 'ClientSideCredentials'
   elements as described in the preceding list, but differs in two
   points:



Winter                   Expires January 7, 2016                [Page 6]


Internet-Draft          EAP Metadata File Format               July 2015


   o  It can optionally contain the leaf 'NonEAPAuthMethod' (an
      enumerated integer of authentication methods not based on EAP)
      instead of 'EAPMethod' because some tunneled EAP types do not
      necessarily contain EAP inside the tunnel (e.g. TTLS-PAP, TEAP).
      The YANG definition ensures that EAPMethod and NonEAPAuthMethod
      are mutually exclusive in instantiations of the YANG module.

   o  It can NOT contain a further 'InnerAuthenticationMethod' because
      establishing a secure tunnel inside an already established secure
      tunnel is considered a pathological case which needs not be
      considered.  See section Section 6.3 for a rationale.

2.2.2.2.  The 'ServerSideCredential' container

   The server-side authentication of a mutually authenticating EAP
   method is typically based on X.509 certificates, which requires the
   EAP peer to be pre-provisioned with one or more trusted root
   Certification Authority (CA) prior to authenticating.  A server is
   uniquely identified by presenting a certificate which is signed by
   these trusted CAs, and by the EAP peer verifying that the name of the
   server matches the expected one.  Consequently, a (set of) CAs and a
   (set of) server names make up the ServerSideCredentials block.

   Note that different EAP methods use different terminology when
   referring to trusted CA roots, server certificates, and server name
   identification.  They also differ or have inherent ambiguity in their
   interpretation on where to extract the server name from (e.g. is the
   server name the CN part of the DistinguishedName, or is the server
   name one of the subjectAltName:DNS entries; what to do if there is a
   mismatch?).  This specification introduces one single element for CA
   trust roots and naming; these notions map into the naming of the
   particular EAP methods very naturally.  This specification can not
   remove the CN vs. sAN:DNS ambiguity in many EAP methods.

   o  zero or more 'CA' lists: a Certification Authority which is
      trusted to sign the expected server certificate.  The set of 'CA'
      occurences SHOULD contain self-signed root certificates to
      establish trust, and MAY contain additional intermediate CA
      certificates which ultimately root in these self-signed root CAs.
      A configuration file can, but SHOULD NOT include only an
      intermediate CA certificate (i.e. without also including the
      corresponding self-signed root) because trusting only an
      intermediate CA without being able to verify to a self-signed root
      is an unsupported notion in many EAP peers.

   o  zero or more 'ServerID' leafs: these leafs contain the expected
      server names in incoming X.509 EAP server certificates.  For EAP
      methods not using X.509 certificates for their mutual



Winter                   Expires January 7, 2016                [Page 7]


Internet-Draft          EAP Metadata File Format               July 2015


      authentication, these elements contain other string-based handles
      which identify the server (Example: EAP-pwd).

2.2.2.3.  The 'ClientSideCredential' container

   There is a variety of means to identify the EAP peer to the EAP
   server.  EAP methods use a subset of these criteria.  As with server-
   side credentials, the terminology for the credential type may differ
   slightly between EAP types.  The naming convention in this
   specification maps nicely into the method-specific terminology.  Not
   all the criteria make sense in all contexts; for EAP methods which do
   not support a criterion, configuration files SHOULD NOT contain the
   corresponding elements, and consumers of the file MUST ignore these
   elements.

   Specifying any one of these elements is optional and they can occur
   at most once.  Consumers of configuration files MUST be able to fall
   back to user-interactive configuration for these parts if they are
   not specified (e.g. ask for the username and password for an EAP
   method during import of the EAP configuration data).  Configuration
   files which contain sensitive elements such as 'Password' MUST be
   handled with due care after the import on the device (e.g. ensure
   minimal file permissions, or delete the source file after
   installing).  See also the leaf 'allow-save' below.

      The leaf 'allow-save' specifies whether consumers should allow the
      user to save the credential persistently; if it is set to false,
      sensitive parts of the client-side credentials MUST NOT be
      persistently saved on the device.  See also section Section 4 for
      transport security considerations.

      Leaf 'AnonymousIdentity' is typically used on the outside of a
      tunneled EAP method and allows to specify which user identity
      should be used outside the tunnel.  This string is not used for
      actual user authentication, but may contain routing hints to send
      the request to the right EAP server.

      'UserName' contains the actual username to be used for user
      authentication.  For tunneled EAP methods, this element SHOULD
      only occur in the 'InnerAuthenticationMethod's
      'ClientSideCredentials' - if differing outer identities are not
      desired in the deployment, the 'OuterIdentity' element should be
      populated for the 'AuthenticationMethod' element but be populated
      with the actual username then.

      The 'ClientCertificate' container holds a X.509 certificate and
      private key; if the key is protected, the 'Passphrase' leaf MAY be
      used to indicate the passphrase, see below



Winter                   Expires January 7, 2016                [Page 8]


Internet-Draft          EAP Metadata File Format               July 2015


      'Passphrase' contains the passphrase needed to unlock a
      cryptographic credential internally on the device (i.e. it is not
      used itself for the actual authentication during the EAP
      conversation)

      'Password' contains the user's password, or an otherwise secret
      string which the user needs to authenticate to the EAP server

      'PAC' contains the Protected Access Credential, typically used in
      EAP-FAST and TEAP.

      'ProvisionPAC' is a boolean which indicates whether a PAC should
      be provisioned on the first connection.  Note that this
      specification allows to use 'ProvisionPAC' without a CA nor
      ServerID in 'ServerSideCredential'.  While this allows the
      operation mode of "Anonymous PAC Provisioning" as used in many
      field deployments of EAP-FAST (and is thus supported here), due to
      the known security vulnerabilities of anonymous PAC provisioning,
      this combination SHOULD NOT be used.

2.2.3.  The 'ProviderInfo' container

   This specification needs to consider that user interaction during the
   installation time may be required; the user at the very least must be
   empowered to decide whether the configuration file was issued by a
   provider he has an account with; the provider may have hints for the
   user (e.g. which password to use for the login), or may want to
   display links to helpdesk pages in case the user has problems with
   the setup or use of his identity.

   The 'ProviderInfo' container allows to specify a range of potentially
   useful information for display to the user (some of which is relevant
   only during installation time, other pieces of information could be
   retained by the EAP peer implementation and displayed e.g. in case of
   failed authentication):

   o  'DisplayName' specifies a user-friendly name for the EAP Identity
      Provider.  Consumers of this specification should be aware that
      this is simple text, and self-asserted by the producer of the
      configuration file.  If more authoritative information about the
      issuer is available (e.g. if the file is signed with S/MIME and
      carries an Organisation name (O attribute) in the signing
      certificate) then the more authoritative information should be
      displayed with more prominence than the self-asserted one.

   o  'Description' specifies a generic descriptive text which should be
      displayed to the user prior to the installation of the
      configuration data.



Winter                   Expires January 7, 2016                [Page 9]


Internet-Draft          EAP Metadata File Format               July 2015


   o  'ProviderLocation' specifies the approximate geographic
      location(s) of the EAP Identity Provider and/or his Points of
      Presence.  This can be useful if the configuration file contains
      multiple 'EAPIdentityProvider' elements; the user device can then
      make an informed guess which of the Identity Providers could be a
      good match to suggest to the user.

   o  'ProviderLogo' specifies the logo of the EAP Identity Provider.
      The same self-assertion considerations as for 'DisplayName' above
      apply.

   o  'TermsOfUse' contains terms of use to be displayed to and
      acknowledged by the user prior to the installation of the
      configuration on the user's system

   o  'Helpdesk' is a container with three possible sub-elements:
      'EmailAddress', 'WebAddress' and 'Phone', all of which can be
      displayed to the user and possibly retained for future debugging
      hints.

2.3.  Internationalisation / Multi-language support

   Some elements in this specification contain text to be displayed in
   User Interfaces; depending on the user's language preferences, it
   would be desirable to present the information in a local language.
   Other elements contain contact information, and those contact points
   may only be able to handle requests in a number of languages; it may
   be desirable to present only contact points to the user which are
   compatible with his language capabilities.

   All elements which either contain localisable text, or which point to
   external resources in localised languages, use the grouping
   'localized-non-interactive' or 'localized-interactive'.  These
   groupings can occur more than once in the specification, which
   enables an iteration of all applicable languages.  If the grouping is
   omitted or its 'lang' leaf is set to "C", the instance of the element
   is considered a default choice which is to be displayed if no other
   language is a better match.

   If the entire file content consistently uses only one language set,
   e.g. all the elements are to be treated as "default" choices, the
   language can also be set for the entire 'EAPIdentityProvider' element
   in its own 'lang-tag' leaf.








Winter                   Expires January 7, 2016               [Page 10]


Internet-Draft          EAP Metadata File Format               July 2015


3.  Derivation of formats from YANG source

   The utility 'pyang' is used to derive XML Schema (XSD) from the YANG
   source.  The Schema for this Internet-Draft was generated with pyang
   1.4.1.

4.  Issuer Authentication, Integrity Protection and Encryption of EAP
    Metadata configuration files

   S/MIME or underlying transport security.  Nuff said :-)

5.  XML Farget Format: File Discovery

5.1.  By MIME-Type: application/eap-config-xml

   For transports where the categorisation of file types via MIME types
   is possible (e.g. HTTP, E-Mail), this document assigns the MIME type

   application/eap-config-xml

   Edge devices can associate this MIME type to incoming files on such
   transports, and register the application which can consume the EAP
   Metadata in XML format as the default handler for this file type.  By
   doing so, for example a single click or tap on a link to the file in
   the device's browser will invoke the configuration process.

   This method of discovery is analogous to the Apple "mobileconfig"
   discovery on recent versions of Mac OS and iOS.

5.2.  By filename extension: .eap-config-xml

   In situations where file types can not be determined by MIME type
   meta-information (e.g. when the file gets stored on a local
   filesystem), this document RECOMMENDs that EAP Metadata in XML format
   files be stored with the extension

   .eap-config-xml

   to identify the file as containing EAP Metadata configuration
   information in XML format.  Edge devices can register the application
   which can consume the EAP Metadata with this file extension.  By
   doing so, for example a single click or tap on the filename in the
   device's User Interface will invoke the configuration process.








Winter                   Expires January 7, 2016               [Page 11]


Internet-Draft          EAP Metadata File Format               July 2015


5.3.  By network location: SCAD

6.  Design Decisions

6.1.  Why YANG and not directly XML, JSON or $FOO?

   XML is a popular choice for EAP configurations: Microsoft's "netsh"
   files, Apple's "mobileconfig" files, the Wi-Fi Alliance's
   "PerProviderSubscription Managed Object", and other vendor/SDO
   definitions are all using XML.

   JSON file formats for EAP configuration exist as well; most notable
   are Google's most recent efforts for their Chromebook Operating
   system.

   YANG has a very rich feature set, and can codify restrictions on
   which element is allowed when in a much more fine-grained way than
   XML Schema could.  Since YANG modules can be converted to XML Schema
   and be instantiated as XML or JSON, they can serve as an abstract
   notion of EAP configuration which can be deployed on consumer devices
   in either of those two more popular formats as needed by the device
   in question.

6.2.  Shallow vs. Deep definition of EAP method properties

6.3.  EAP tunneling inside EAP tunnels

6.4.  Placement of 'OuterIdentity' inside 'AuthenticationMethod'

7.  Implementation Status

   RFC Editor Note: Please remove this section and the reference to
   [RFC6982] prior to publication.

   This section records the status of known implementations of the
   protocol defined by this specification at the time of posting of this
   Internet-Draft, and is based on a proposal described in [RFC6982].
   The description of implementations in this section is intended to
   assist the IETF in its decision processes in progressing drafts to
   RFCs.  Please note that the listing of any individual implementation
   here does not imply endorsement by the IETF.  Furthermore, no effort
   has been spent to verify the information presented here that was
   supplied by IETF contributors.  This is not intended as, and must not
   be construed to be, a catalog of available implementations or their
   features.  Readers are advised to note that other implementations may
   exist.





Winter                   Expires January 7, 2016               [Page 12]


Internet-Draft          EAP Metadata File Format               July 2015


   According to [RFC6982], "this will allow reviewers and working groups
   to assign due consideration to documents that have the benefit of
   running code, which may serve as evidence of valuable experimentation
   and feedback that have made the implemented protocols more mature.
   It is up to the individual working groups to use this information as
   they see fit".

   All of the implementations listed below interoperate from producer-
   to consumer-side of the EAP metadata specification.

   Producers of the configuration files

   o  eduroam Configuration Assistant Tool

         Organisation: Nicolaus Copernicus University, Torun, Poland

         Implementation Name: eduroam Configuration Assistant Tool

         This existing tool already produces EAP configuration files in
         various proprietary formats for hundreds of EAP Identity
         Providers.  A module which produces configuration files in the
         XML variant as specified in an eralier revision of this draft
         (-00) is in production deployment.

         Link to production version: https://cat.eduroam.org

         Maturity: production

         Coverage: entire specification; XML structure aligns with
         version -00 of this draft

         Licensing: freely distributable with acknowledgement (BSD
         style)

         Implementation experience: given that the specification is XML,
         it is easy to produce a configuration file with common XML
         libraries.  The CAT Framework is written in PHP, which provides
         ample procedures to produce well-formed XML.

         Contact Information: Tomasz Wolniewicz (see Section 10); the
         CAT software homepage at http://forge.geant.net/CAT/

   Consumers of the configuration files

   o  Android

         Organisation: Swansea University, Swansea, Wales, U.K.




Winter                   Expires January 7, 2016               [Page 13]


Internet-Draft          EAP Metadata File Format               July 2015


         Implementation Name: eduroam CAT app

         An Android app, compatible with API level 18 of Android (i.e.
         version 4.3 and above); the app consumes the -00 revision of
         this specification.  The information in the config files is
         used to push settings to the SSID 'eduroam' (hard-coded) via
         the WifiEnterpriseConfig API.  The app is in production
         deployment, with a 4-four digit amount of downloads one month
         after launch.

         Link to production version: https://play.google.com/store/apps/
         details?id=uk.ac.swansea.eduroamcat

         Maturity: production

         Coverage: entire specification; XML structure aligns with
         version -00 of this draft

         Licensing: Apache 2.0

         Implementation experience: parsing XML is rather
         straightfoward.  The ability to verify signatures on XML files
         (S/MIME vs. XMLDSIG as discussed in Section 4) remains unclear
         at this point.

         Contact Information: eduroam CAT Play Store app contact address
         ( playstore@eduroam.org )

   o  Windows

         Organisation: Amebis, d.o.o.i, Kamnik, Slovenia

         Implementation Name: ArnesLink

         A Windows supplicant/Enterprise WiFi installer/debugging
         assistant.  The application consumes the -02 revision of this
         specification.  The information from the XML variant of this
         specification is embedded in a larger XML file.  The additional
         parts of the overall configuration file include information
         regarding the SSID to configure and other useful, but not EAP-
         specific information.  The complete set of information is used
         to push settings into the Windows Wi-Fi configuration via the
         'netsh' tool.  The app is in production deployment.

         Link to production version: http://ftp.arnes.si/software/
         eduroam/ArnesLink/

         Maturity: production



Winter                   Expires January 7, 2016               [Page 14]


Internet-Draft          EAP Metadata File Format               July 2015


         Coverage: entire specification; XML structure aligns with
         version -02 of this draft

         Licensing: GPL

         Implementation experience: parsing XML is rather
         straightfoward.  For Wi-Fi configuration use, the lack of
         802.11 specific details in the config file is an issue.

         Contact Information: info@amebis.si

   o  Linux: the authors of this specification are currently developing
      an application for UNIX-like operating systems which configure
      enterprise networks via the NetworkManager daemon; the application
      can consume the file format as defined in this draft specification
      (XML format) and configure the settings via Networkmanager's D-BUS
      interface.

8.  Security Considerations

9.  IANA Considerations

   IANA is requested to allocate the MIME type "application/eap-config-
   xml" in the MIME Media Types / application registry (see section
   Section 5.1).  The allocation should contain the following values:

   o  Name: eap-config-xml

   o  Template: see Appendix A (RFC editor note: remove this appendix
      prior to publication; replace this line with the URL to the
      application as posted online)

   o  Reference: RFCabcd (RFC editor note: replace with the RFC number
      of this document)

   IANA is requested to allocate the location "TBD" in the "well-known
   URIs" registry.  The allocation should contain the following values:

   o  URI Suffix: TBD

   o  Change Controller: IETF

   o  Reference: RFCabcd (RFC editor note: replace with the RFC number
      of this document)

   o  Related Information: none





Winter                   Expires January 7, 2016               [Page 15]


Internet-Draft          EAP Metadata File Format               July 2015


   IANA is requested to register the XML namespace
   "urn:ietf:params:xml:ns:eap-config-xml" in the "IETF XML Registry /
   ns".  The allocation should contain the following values:

   o  ID: eap-config-xml

   o  URI: urn:ietf:params:xml:ns:eap-config-xml

   o  Filename: https://www.iana.org/assignments/xml-registry/ns/eap-
      config-xml.txt (to be created by IANA)

   o  Reference: RFCabcd (RFC editor note: replace with the RFC number
      of this document)

   IANA is requested to register the XML schema
   "urn:ietf:params:xml:schema:eap-config-xml" in the "IETF XML Registry
   / schema".  The allocation should contain the following values:

   o  ID: eap-config-xml

   o  URI: urn:ietf:params:xml:schema:eap-config-xml

   o  Filename: https://www.iana.org/assignments/xml-registry/schema/
      eap-config-xml.xsd (to be created by IANA; current XSD file is
      linked to in section Section 2.1)

   o  Reference: RFCabcd (RFC editor note: replace with the RFC number
      of this document)

10.  Contributors

   Tomasz Wolniewicz of Nicolaus Copernicus University in Torun, Poland,
   provided significant input into this specification.

11.  References

11.1.  Normative References

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119, March 1997.

11.2.  Informative References

   [RFC3748]  Aboba, B., Blunk, L., Vollbrecht, J., Carlson, J., and H.
              Levkowetz, "Extensible Authentication Protocol (EAP)", RFC
              3748, June 2004.





Winter                   Expires January 7, 2016               [Page 16]


Internet-Draft          EAP Metadata File Format               July 2015


   [RFC5216]  Simon, D., Aboba, B., and R. Hurst, "The EAP-TLS
              Authentication Protocol", RFC 5216, March 2008.

   [RFC5281]  Funk, P. and S. Blake-Wilson, "Extensible Authentication
              Protocol Tunneled Transport Layer Security Authenticated
              Protocol Version 0 (EAP-TTLSv0)", RFC 5281, August 2008.

   [RFC5931]  Harkins, D. and G. Zorn, "Extensible Authentication
              Protocol (EAP) Authentication Using Only a Password", RFC
              5931, August 2010.

   [RFC6982]  Sheffer, Y. and A. Farrel, "Improving Awareness of Running
              Code: The Implementation Status Section", RFC 6982, July
              2013.

   [I-D.wierenga-ietf-eduroam]
              Wierenga, K., Winter, S., and T. Wolniewicz, "The eduroam
              architecture for network roaming", draft-wierenga-ietf-
              eduroam-05 (work in progress), March 2015.

   [HS20]     Wi-Fi Alliance, "Hotspot 2.0 Technical Specification",
              2012, <https://www.wi-fi.org/hotspot-20-technical-
              specification-v100>.




























Winter                   Expires January 7, 2016               [Page 17]


Internet-Draft          EAP Metadata File Format               July 2015


Appendix A.  Appendix A: MIME Type Registration Template

   The following values will be used for the online MIME type
   registration at https://www.iana.org/form/media-types

      Your Name: Stefan Winter

      Your Email Address: stefan.winter@restena.lu

      Media Type Name: Application

      Subtype name: (Standards tree) eap-config-xml

      Required parameters: (none)

      Optional parameters: (none)

      Encoding Considerations: 8-Bit text

      Security Considerations: This file type carries configuration
      information for consumer devices.  It has the potential to
      substantially alter the consumer's device; particularly to install
      a new trusted Certification Authority.  Applications consuming
      files of this type need to be cautious to explain to the end user
      what is being altered, so that they understand the consequences.
      For further explanations, see Section 8 of draft-winter-opsawg-
      eap-metadata.  (Note to RFC Editor: replace this reference with
      the RFC number of this document once known)

      Interoperability Considerations: The file content is XML version
      1.0 or later.  The encoding SHOULD be UTF-8, but implementations
      consuming the file SHOULD be prepared to encounter different
      encodings.

      Published Specification: draft-winter-opsawg-eap-metadata (Note to
      RFC Editor: replace this reference with the RFC number of this
      document once known)

      Applications which use this media type: files of this type are
      intended for consumption by sortware on edge devices; they consume
      the information therein to configure authentication parameters
      (EAP protocol and EAP method payload configurations) which are
      then applied to network or application authentication scenarios.

      Fragment Identifier Considerations: files of this type are
      expected to be transmitted in their entirety.  If a reference to a
      specific part of the content is to be made, XML XPath expressions




Winter                   Expires January 7, 2016               [Page 18]


Internet-Draft          EAP Metadata File Format               July 2015


      are to be used.  I.e. fragment identifier formats are not expected
      to be used.

      Restrictions on Usage: none

      Provisional registration: initial submission of this form will be
      executed after adoption in the IETF; it will be a provisional
      registration.  Final registration will be done after IESG review.

      Additional information:

         Deprecated alias types for this name: none

         Magic numbers: none

         File extensions: eap-config-xml

         Macintosh File Type Codes: TBD

         Object Identifiers or OIDs: none

      Intended Usage: Common (no further provisions)

      Other Information/General Comment: none

      Person to contact for further information:

         Name: Stefan Winter

         E-Mail: stefan.winter@restena.lu

         Author/Change controller: IETF



   DATA



Author's Address











Winter                   Expires January 7, 2016               [Page 19]


Internet-Draft          EAP Metadata File Format               July 2015


   Stefan Winter
   Fondation RESTENA
   6, rue Richard Coudenhove-Kalergi
   Luxembourg  1359
   LUXEMBOURG

   Phone: +352 424409 1
   Fax:   +352 422473
   EMail: stefan.winter@restena.lu
   URI:   http://www.restena.lu.









































Winter                   Expires January 7, 2016               [Page 20]


Html markup produced by rfcmarkup 1.129b, available from https://tools.ietf.org/tools/rfcmarkup/