[Docs] [txt|pdf] [Tracker] [Email] [Diff1] [Diff2] [Nits]

Versions: 00 01 02 03 04 05 06

IPSecME Working Group                                          A. Yamaya
Internet-Draft                                 Furukawa Network Solution
Intended Status: Informational                                   T. Ohya
Expires: January 4, 2014                                             NTT
                                                             T. Yamagata
                                                                    KDDI
                                                           S. Matsushima
                                                        Softbank Telecom
                                                            July 4, 2014




       Simple VPN solution using Multi-point Security Association
                      draft-yamaya-ipsecme-mpsa-04


Abstract


   This document describes the over-lay network solution by utilizing
   dynamically established IPsec multi-point Security Association (SA)
   without individual connection.

   Multi-point SA technology provides the simplified mechanism of the
   Auto Discovery and Configuration function.  This is applicable for
   any IPsec tunnels such as IPv4 over IPv4, IPv4 over IPv6, IPv6 over
   IPv4 and IPv6 over IPv6.


Status of this Memo


   This Internet-Draft is submitted to IETF in full conformance with the
   provisions of BCP 78 and BCP 79.


   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at http://datatracker.ietf.org/drafts/current/.




   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference



Yamaya, et al.          Expires January 4, 2015                 [Page 1]


Internet-Draft               Multi-Point SA                    July 2015


   material or to cite them other than as "work in progress."


   This Internet-Draft will expire on March 9, 2014.


Copyright and License Notice


   Copyright (c) 2013 IETF Trust and the persons identified as the
   document authors.  All rights reserved.


   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   (http://trustee.ietf.org/license-info) in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.


Table of Contents

   1.  Introduction . . . . . . . . . . . . . . . . . . . . . . . . .  4
     1.1.  Terminology  . . . . . . . . . . . . . . . . . . . . . . .  4
     1.2.  Conventions Used in This Document  . . . . . . . . . . . .  4
   2.  Motivation . . . . . . . . . . . . . . . . . . . . . . . . . .  4
     2.1.  Conformance list . . . . . . . . . . . . . . . . . . . . .  6
   3.  Procedure  . . . . . . . . . . . . . . . . . . . . . . . . . .  7
     3.1.  Sequence . . . . . . . . . . . . . . . . . . . . . . . . .  7
     3.2.  Extended format  . . . . . . . . . . . . . . . . . . . . .  8
       3.2.1.  Vendor ID  . . . . . . . . . . . . . . . . . . . . . .  8
       3.2.2.  MPSA_PUT . . . . . . . . . . . . . . . . . . . . . . .  8
     3.3.  Multi-point SA Management  . . . . . . . . . . . . . . . . 13
       3.3.1.  Gateway  . . . . . . . . . . . . . . . . . . . . . . . 13
       3.3.2.  CPE  . . . . . . . . . . . . . . . . . . . . . . . . . 13
       3.3.3.  Rekeying . . . . . . . . . . . . . . . . . . . . . . . 14
     3.4.  Forwarding . . . . . . . . . . . . . . . . . . . . . . . . 14
   4. Peer discovery  . . . . . . . . . . . . . . . . . . . . . . . . 15
     4.1 example of MPSA with BGP for route based VPN . . . . . . . . 15
   5.  Security Considerations  . . . . . . . . . . . . . . . . . . . 16
     5.1. Protected by MPSA . . . . . . . . . . . . . . . . . . . . . 16
     5.2 Security issues not to be solved by MPSA . . . . . . . . . . 16
       5.2.1 Attack from outside of the group . . . . . . . . . . . . 16
       5.2.2 Attack from inside of the group  . . . . . . . . . . . . 16



Yamaya, et al.          Expires January 4, 2015                 [Page 2]


Internet-Draft               Multi-Point SA                    July 2015


     5.3 Forward secrecy and backward secrecy . . . . . . . . . . . . 17
   5.  IANA Considerations  . . . . . . . . . . . . . . . . . . . . . 17
   6.  References . . . . . . . . . . . . . . . . . . . . . . . . . . 17
     6.1.  Normative References . . . . . . . . . . . . . . . . . . . 17
     6.2.  Informative References . . . . . . . . . . . . . . . . . . 17
   Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . . 18













































Yamaya, et al.          Expires January 4, 2015                 [Page 3]


Internet-Draft               Multi-Point SA                    July 2015


1.  Introduction


   As described in the problem statement document [ad-vpn-problem],
   dynamic, secure and scalable system for establishing SAs is needed.


   With multi-point SA, an endpoint automatically discovers other
   endpoint. In this draft, an endpoint means an inexpensive CPE, which
   can hardly establish large number of IPsec sessions simultaneously.
   The CPEs also share a multi-point SA within the same group, and there
   is no individual connection between them.


   Scalability issue becomes serious in the service, such as triple play
   which requires large number of sessions at the same time. MPSA
   enables large scale simultaneous sessions even with inexpensive CPEs,
   and can avoid scalability issue.


   The latency between CPEs can be minimized because of stateless shared
   multipoint SA, MPSA is suitable for video and voice services which is
   very sensitive to latency.


   It can avoid the exhaustive configuration for CPEs and gateways. No
   reconfiguration is needed when a new CPE is added, removed, or
   changed. It can avoid high load on the gateways.


1.1.  Terminology


   Multi-point SA - This is similar to Dynamic Full Mesh topology
   described in [ad-vpn-problem]; direct connections exist in a hub and
   spoke manner, but only one SA for data transfer is shared with all
   CPEs.


1.2.  Conventions Used in This Document


   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
   document are to be interpreted as described in RFC 2119 [RFC2119].


2.  Motivation



Yamaya, et al.          Expires January 4, 2015                 [Page 4]


Internet-Draft               Multi-Point SA                    July 2015


   There are two major topologies - Star topology and full-mesh topology
   - to communicate securely on over-lay network by using IPsec.

   Figure.1 shows star topology. The number of IPsec connection is the
   same as the number of CPEs (CPE). Authentication, Authorization and
   Accounting (AAA) of each CPE can be achieved on the gateway.

   The problem of the star topology is all the traffic go through the
   gateway, then it causes high load and latency.


            +---------------------------------------------+
            |                IPsec Gateway                |
            |                                             |
            |    +--------------(A<->C)--------------+    |
            |    | +---(A<->B)---+   +---(B<->C)---+ |    |
            +---:|-|:-----------:|---|:-----------:|-|:---+
                :| |:           :|   |:           :| |:
                :| |:           :|   |:           :| |:
                :| |:           :|   |:           :| |:
            +---:v-v:---+       :|   |:       +---:v-v:---+
            |           |       :|   |:       |           |
            |   CPE_A   |       :|   |:       |   CPE_C   |
            |           |       :|   |:       |           |
            +-----------+    +--:v---v:--+    +-----------+
                             |           |
                             |   CPE_B   |
                             |           |
                             +-----------+


                                Figure 1


   Figure.2 shows Full-mesh topology. There is no gateways. Each CPE
   establishes IPsec connection independently. The latency on this
   topology is relatively low compared to star topology.


   In large system, there are huge number ((N^2-N)/2) of IPsec
   connections. AAA of each CPE is hard to manage in this topology.
   Moreover, when a CPE is added, removed or changed, reconfiguration is
   needed for all rest of the CPEs.


            +-----------+                     +-----------+
            |           |.....................|           |
            |   CPE_A   <-------(A<->C)------->  CPE_C    |



Yamaya, et al.          Expires January 4, 2015                 [Page 5]


Internet-Draft               Multi-Point SA                    July 2015


            |           |.....................|           |
            +---: ^ :---+                     +---: ^ :---+
                : | :                             : | :
                : | :        +-----------+        : | :
                : | :........|           |........: | :
                : +-(A<->B)-->  CPE_B    <--(B<->C)-+ :
                :............|           |............:
                             +-----------+


                                Figure 2


   The solution in this document eliminates the problems listed above.
   Figure 3 shows topology of multi-point SA. Traffic between CPEs does
   not go through the gateway, low latency, AAA of each CPE can be
   achieved, the number of IPsec connection is almost same as star
   topology, and no reconfiguration is needed for all the rest of CPEs
   even when a CPE is added, removed or changed.


          +---------------------------------------------+
          |                IPsec Gateway                |
          |                                             |
          +---: | :------------: | :------------: | :---+
              : | :            : | :            : | :
              : | :            : | :            : | :
             ----------------------------------------- SA to distribute
              : | :            : | :            : | :  Multi-point SA
              : | :            : | :            : | :
          +---: v :---+    +---: v :---+    +---: v :---+
          |           |    |           |    |           |
          |   CPE_A   |    |   CPE_B   |    |   CPE_C   |
          |           |    |           |    |           |
          +--- ^ ^ ---+    +--- ^ ^ ---+    +--- ^ ^ ---+
          .....| |..............| |..............| |.....
               | |              | |              | |     \
               | +----(A<->B)---+ +---(B<->C)----+ |   Multi-point SA
               +--------------(A<->C)--------------+   for data transfer
          .............................................../


                                Figure 3


2.1.  Conformance list





Yamaya, et al.          Expires January 4, 2015                 [Page 6]


Internet-Draft               Multi-Point SA                    July 2015


   This section describes the levels of conformance of the MPSA to the
   requirement described in [ad-vpn-problem] section 4.1. As listed
   below, almost all the requirement are covered in MPSA except (5) and
   (8).


3.  Procedure


3.1.  Sequence


      The multi-point SA capability of the remote host is determined by
      an exchange of Vendor ID payloads. In the IKE_SA_INIT exchange,
      the Vendor ID payload for this specification is sent if the multi-
      point SA is used.


             CPE                       Gateway
            -----------               -----------
             HDR, SAi1, KEi,
                Ni, V(MPSA)  -->
                                  <--  HDR, SAr1, KEr,
                                          Nr, [CERTREQ,] V(MPSA)


                                          MPSA: multi-point SA


      The initial exchange (including IKE_AUTH) is same as [IKEV2],
      other than Vendor ID payload included in IKE_SA_INIT.


      After the initial exchange has finished successfully, a new
      INFORMATIONAL exchange is used to distribute multi-point SA to the
      CPE, with the Notify payload of MPSA_PUT that includes
      cryptographic algorithm, nonce, keying material, SPI and so on.
      Keys for multi-point SA is generated according to the contents of
      the Notify payload by the CPE. The response of the Notify payload
      has empty Encrypted payload.


             CPE                       Gateway
            -----------               -----------
                                  <--  HDR, SK {N(MPSA_PUT)}
             HDR, SK {}  -->





Yamaya, et al.          Expires January 4, 2015                 [Page 7]


Internet-Draft               Multi-Point SA                    July 2015


3.2.  Extended format


3.2.1.  Vendor ID


      This document defines a new Vendor ID. The content of the payload
      is described below.


         "multi-point SA"


3.2.2.  MPSA_PUT


      This document defines a new Notify Message Type MPSA_PUT. The
      Notify Message Type of MPSA_PUT is 40960. Notification Data of
      MPSA_PUT has a Proposal-substructure-like format. It consists of
      Transform-substructure-like structures that have following data.


         Description                     Trans.  Reference
                                         Type
         -------------------------------------------------------
         Encryption Algorithm (ENCR)     1       RFC5996
         Pseudorandom Function (PRF)     2       RFC5996
         Integrity Algorithm (INTEG)     3       RFC5996
         Nonce (NONCE)                   241
         SK_d (SKD)                      242
         Lifetime (LIFE)                 243
         Rollover time 1 (ROLL1)         244
         Rollover time 2 (ROLL2)         245


   o  Nonce - For Transform Type 241, the Transform ID is 1. The
      attribute contains actual nonce value with attribute type 16384.
      The size of the Nonce Data is between 16 and 256 octets.


      Name                 Number
      ---------------------------------------------------
      NONCE_NONCE          1


      Attribute Type       Value         Attribute Format
      ------------------------------------------------------------
      Nonce Value          16384         TLV



Yamaya, et al.          Expires January 4, 2015                 [Page 8]


Internet-Draft               Multi-Point SA                    July 2015


   o  SK_d - For Transform Type 242, the Transform ID is 1. The
      attribute contains actual SK_d value with attribute type 16385.
      The length of SK_d Data is the preferred key length of the PRF.


      Name                 Number
      ---------------------------------------------------
      SKD_SK_D             1


      Attribute Type       Value         Attribute Format
      ------------------------------------------------------------
      SK_d Value           16385         TLV


   o Lifetime - For For Transform Type 243, the Transform ID is 1. The
      attribute contains actual lifetime value with attribute type
      16386. The length of Lifetime Value is 4 octets. Lifetime is
      stored in seconds as effective time of the multi-point SA.


      Name                 Number
      ---------------------------------------------------
      LIFE_LIFETIME        1


      Attribute Type       Value         Attribute Format
      ------------------------------------------------------------
      Lifetime Value       16386         TLV


   o  Rollover time 1 - For Transform Type 244, the Transform ID is 1.
      The attribute contains actual rollover time 1 value with attribute
      type 16387. The length of Rollover time 1 Value is 4 octets.
      Rollover time 1 defines activation time delay for new outbound
      multi-point SA.


      Name                 Number
      ---------------------------------------------------
      ROLL1_ROLLOVER1      1


      Attribute Type       Value         Attribute Format
      ------------------------------------------------------------
      Rollover1 Value      16387         TLV





Yamaya, et al.          Expires January 4, 2015                 [Page 9]


Internet-Draft               Multi-Point SA                    July 2015


   o  Rollover time 2 - For Transform Type 245, the Transform ID is 1.
      The attribute contains actual rollover time 2 value with attribute
      type 16388. The length of Rollover time 2 Value is 4 octets.
      Rollover time 2 defines deactivation time delay for old inbound
      multi-point SA.


      Name                 Number
      ---------------------------------------------------
      ROLL2_ROLLOVER2      1


      Attribute Type       Value         Attribute Format
      ------------------------------------------------------------
      Rollover2 Value      16388         TLV


   Therefore, the format of the MPSA_PUT of the Notify Message is
   described below.


       0                   1                   2                   3
       0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      | Next Payload  |C|  RESERVED   |         Payload Length        |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |  Protocol ID  |   SPI Size    |      Notify Message Type      |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |                Security Parameter Index (SPI)                 |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      | 0 (last) or 2 |   RESERVED    |         Proposal Length       |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      | Proposal Num  |  Protocol ID  |    SPI Size   |Num  Transforms|
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |                Security Parameter Index (SPI)                 |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      | 0 (last) or 3 |   RESERVED    |        Transform Length       |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |Transform Type |   RESERVED    |          Transform ID         |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |                                                               |
      ~                      Transform Attributes                     ~
      |                                                               |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      | 0 (last) or 3 |   RESERVED    |        Transform Length       |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |Transform Type |   RESERVED    |          Transform ID         |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+



Yamaya, et al.          Expires January 4, 2015                [Page 10]


Internet-Draft               Multi-Point SA                    July 2015


      |                                                               |
      ~                      Transform Attributes                     ~
      |                                                               |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+


      ~                                                               ~


      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |       0       |   RESERVED    |        Transform Length       |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |Transform Type |   RESERVED    |          Transform ID         |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      |                                                               |
      ~                      Transform Attributes                     ~
      |                                                               |
      +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+


   The following example shows a N(MPSA_PUT) notification message. The
   SPIs in the Proposal-like and Tranform-like substructure are the same
   value. Following values are defined by the example.


      Protocol: ESP
      ENCR:     AES-CBC (256bits)
      PRF:      SHA-1
      INTEG:    HAMC-SHA-1-96
      NONCE:    241
      SKD:      242
      LIFE:     243
      ROLL1:    244
      ROLL2:    245


        0                   1                   2                   3
        0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
       +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      /|     0 (last)  |C|  RESERVED   |         Payload Length        |
     / +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Notify |    3 (ESP)    | SPI Size = 4  |           MPSA_PUT            |
     \ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      \|                Security Parameter Index (SPI)                 |
       +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      /|    0 (last)   |   RESERVED    |         Proposal Length       |
Pro-   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
 posal-| Prop Num = 1  |    3 (ESP)    | SPI Size = 4  |Num  Transforms|



Yamaya, et al.          Expires January 4, 2015                [Page 11]


Internet-Draft               Multi-Point SA                    July 2015


  like +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      \|                Security Parameter Index (SPI)                 |
       +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      /|       3       |   RESERVED    |        Transform Length       |
     / +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
  ENCR |   1 (ENCR)    |   RESERVED    |      12 (ENCR_AES_CBC)        |
     \ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      \|1|       14 (Key Length)       |            256                |
       +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      /|       3       |   RESERVED    |        Transform Length       |
   PRF +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      \|    2 (PRF)    |   RESERVED    |      2 (PRF_HMAC_SHA1)        |
       +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      /|       3       |   RESERVED    |        Transform Length       |
 INTEG +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      \|   3 (INTEG)   |   RESERVED    |    2 (AUTH_HMAC_SHA1_96)      |
       +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      /|       3       |   RESERVED    |        Transform Length       |
     / +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
    /  |   241 (NONCE) |   RESERVED    |              1                |
   /   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
 NONCE |0|       16384 (Nonce)         |       Attribute Length        |
   \   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
    \  |                                                               |
     \ ~                            [Nonce]                            ~
      \|                                                               |
       +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      /|       3       |   RESERVED    |        Transform Length       |
     / +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
    /  |   242 (SKD)   |   RESERVED    |              1                |
   /   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
 SKD   |0|       16385 (SK_d)          |       Attribute Length        |
   \   +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
    \  |                                                               |
     \ ~                            [SK_d]                             ~
      \|                                                               |
       +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      /|       3       |   RESERVED    |        Transform Length       |
     / +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
    /  |  243 (LIFE)   |   RESERVED    |              1                |
  LIFE +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
    \  |0|       16386 (Lifetime)      |     Attribute Length = 4      |
     \ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      \|                          [Lifetime]                           |
       +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      /|       3       |   RESERVED    |        Transform Length       |
     / +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
    /  |  244 (ROLL1)  |   RESERVED    |              1                |



Yamaya, et al.          Expires January 4, 2015                [Page 12]


Internet-Draft               Multi-Point SA                    July 2015


 ROLL1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
    \  |0|       16386 (Lifetime)      |     Attribute Length = 4      |
     \ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      \|                       [RolloverTime1]                         |
       +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      /|       3       |   RESERVED    |        Transform Length       |
     / +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
    /  |  245 (ROLL2)  |   RESERVED    |              1                |
 ROLL2 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
    \  |0|       16386 (Lifetime)      |     Attribute Length = 4      |
     \ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
      \|                       [RolloverTime2]                         |
       +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+


3.3.  Multi-point SA Management


3.3.1.  Gateway


   Gateway generates a multi-point SA for a group before connecting to
   any CPEs.


   After the initial exchanges have finished, Gateway distributes the
   same multi-point SA information to CPEs within the group by sending
   N(MPSA_PUT).


   SPI and Nonce is generated similar way of [IKEv2]. SK_d is generated
   from random numbers similar to Nonce.


   The same SPI value is stored to Notify payload and Proposal-like
   substructure.


   The multi-point SA will not be negotiated between gateway and CPE,
   but will be notified from gateway to CPE one way.


   Gateway initiates rekey before Lifetime expiration. As the Lifetime,
   gateway notifies the effective time left of the multi-point SA.


3.3.2.  CPE




Yamaya, et al.          Expires January 4, 2015                [Page 13]


Internet-Draft               Multi-Point SA                    July 2015


   After the initial exchange has finished, CPE obtains multi-point SA
   information by receiving N(MPSA_PUT) from gateway. The keys for the
   multi-point SA are generated in the same procedure described in
   [IKEv2], except Ni | Nr is replaced by Nonce.


   Therefore, KEYMAT is derived by PRF listed below.


     KEYMAT = prf+(SK_d, Nonce)


   The multi-point SA is protected in a cryptographic manner by ENCR and
   INTEG which uses the generated keys.


   The SPI value for the multi-point SA is the same of its in Notify
   message.


   CPE uses the same multi-point SA as both inbound and outbound SAs.


   CPE deletes both of inbound and outbound SA when Lifetime is
   expired.


   Rollover time 1, 2 have no meaning when no old multi-point SA exists.


3.3.3.  Rekeying


   Rekeying should be finished before Lifetime expiration of current
   multi-point SA. Rekeying of multi-point SA will be performed as
   follows.


    - Gateway generates a new multi-point SA
    - Gateway distributes a new multi-point SA to all CPEs within the
      group
    - CPE replaces the current multi-point SA to new one


   CPE replaces multi-point SA using rollover method like [GDOI].


3.4.  Forwarding



Yamaya, et al.          Expires January 4, 2015                [Page 14]


Internet-Draft               Multi-Point SA                    July 2015


   Each CPE sends and receives encapsulated packets using the multi-
   point SA.


   The destination address of encapsulated packet will be determined
   with routing information, which can achieved  by static configuration
   or route exchange mechanism such as BGP on encapsulated environment
   described in [MESH].


   It is applicable for any IPsec tunnels such as IPv4 over IPv4, IPv4
   over IPv6, IPv6 over IPv4 and IPv6 over IPv6.


4. Peer discovery

   MPSA does not provide peer discovery function by itself. However,
   other mechanism, such as BGP, can be employed with MPSA for automatic
   peer discovery. One example is a use of BGP, described in [MESH], to
   learn peer information as next-hops.


4.1 example of MPSA with BGP for route based VPN

   Between gateway and each peer, IKE_SA and CHILD_SA are established by
   IKEv2. On the IKE_SA, an MPSA management message (MPSA_PUT) is served
   from the gateway to the peer.

   On the CHILD_SA, the gateway and the peer establish a iBGP session to
   exchange route information (NLRIs). Gateway can act as a BGP route
   reflector (RR), which can reflect NLRIs among all iBGP peers of the
   gateway. In other words, the peer can learn all NLRIs advertised by
   all other peers.

   According to [ENCAPS], each peer can advertise ESP peer address as
   well as conventional NLRIs, all of those can be reflected by RR on
   the gateway.

   At this point, each peer can have all other peer addresses as well as
   route information. The peer can decide a peer address by mean of
   recursive route lookup from the destination address of a packet to be
   forwarded. This decision can be made by the peer itself, without any
   additional communication with the gateway.

   Instead of [ENCAPS], each peer can also do it by [RNH]. Each peer
   learns all other peer addresses by BGP Remote-Next-Hop attributes and
   decides a peer address from a packet to be forwarded, as same as
   using [ENCAPS].



Yamaya, et al.          Expires January 4, 2015                [Page 15]


Internet-Draft               Multi-Point SA                    July 2015


5.  Security Considerations

   MPSA uses IKEv2 to protect MPSA management message, MPSA_PUT. Thus,
   CPEs are authenticated by IKEv2. Using a shared SA for communication
   between CPEs, MPSA does not provide the following features.
   - Data origin authentication
   - Anti-replay protection

   MPSA itself does not provide access control for user datagrams, but
   peer discovery may be able to provide access control as well as those
   of route based VPN. For example, using BGP for peer discovery
   described in 4.1, access control could be provided by filtering
   exchanged routes at the gateway. In this case, filtering by source
   address, protocol and ports can not be achieved. If you need it, you
   could do by other security policy rules as local setting at CPEs .


5.1. Protected by MPSA

   - Authenticating CPEs and gateway Authentication is provided by IKEv2
   with pre-shared key or RSA signature. MPSA management messages are
   exchanged after IKEv2 negotiation.

   - Confidentiality and integrity Packets are encapsulated by ESP, so
   that MPSA provides confidentiality and integrity against outside of
   the group, but does not them against members of the group


5.2 Security issues not to be solved by MPSA

5.2.1 Attack from outside of the group

   - Anti-replay protection
   MPSA does not provide anti-replay protection, because sequence number
   synchronization between peers needs additional mechanism. Using a
   closed network as a transport might be effective to mitigate this
   kind of attacks.

   - Leaking a IKE_SA key
   If an attacker could sniff packets on a IKE_SA, and key of the SA
   were leaked, the attacker may get a key of MPSA by decoding a sniffed
   MPSA_PUT message.


5.2.2 Attack from inside of the group

   If there is a malicious CPE or a CPE is hijacked by an attacker, MPSA
   can be attacked in the following way because MPSA, including



Yamaya, et al.          Expires January 4, 2015                [Page 16]


Internet-Draft               Multi-Point SA                    July 2015


   cryptograghic key, is shared by all CPEs.

   - An attacker can impersonate another CPE. A closed network that
   prohibits source address spoofing could mitigate the impersonating.

   - An attacker can decode packets between the other CPEs if the attacker
   could sniff packets.


5.3 Forward secrecy and backward secrecy

   MPSA MAY be rekeyed when a CPE is removed from the group, for the
   removed CPE not to access the other CPEs communication after that, or
   when a CPE is added from the group, for it not to do before that. If
   not rekeyed, a removed/added CPE could access


5.  IANA Considerations


   This memo includes no request to IANA.


6.  References


6.1.  Normative References


   [IKEv2] Kaufman, C., Hoffman, P., Nir, Y., and P. Eronen, "Internet
              Key Exchange Protocol Version 2 (IKEv2)", RFC 5996,
              September 2010.
6.2.  Informative References


   [GDOI] Weis, B., Rowles, S., and T. Hardjono, "The Group Domain of
              Interpretation", RFC 6407, October 2011.

   [MESH] Wu, J., Cui, Y., Metz, C., and E. Rosen, "Softwire Mesh
              Framework", RFC 5565, June 2009.

   [ad-vpn-problem] Manral, V. and S. Hanna, "Auto-Discovery VPN Problem
              Statement and Requirements", RFC 7018, September 2013.

   [RNH] Van de Velde, G., Patel, K., Rao, D., Raszuk, R., and Bush, R.,
              "BGP Remote-Next-Hop", draft-vandevelde-idr-remote-next-
              hop-07, June 2014




Yamaya, et al.          Expires January 4, 2015                [Page 17]


Internet-Draft               Multi-Point SA                    July 2015


Authors' Addresses

   Arifumi Yamaya
   Furukawa Network Solution Corp.
   5-1-9, Higashi-Yawata, Hiratsuka
   Kanagawa 254-0016, JAPAN
   Email: yamaya@fnsc.co.jp


   Takafumi Ohya
   NTT Corporation
   Nishi-shinjuku, Shinjuku-ku,
   Tokyo 163-8019, JAPAN
   Email: takafumi.ooya@hco.ntt.co.jp


   Tomohiro Yamagata
   KDDI Corporation
   Garden Air Tower
   Iidabashi, Chiyoda-ku,
   Tokyo 102-8460, JAPAN
   Email: to-yamagata@kddi.com


   Satoru Matsushima
   Softbank Telecom Corp.
   1-9-1, Higashi-Shimbashi, Minato-Ku
   Tokyo 105-7322, JAPAN
   Email: satoru.matsushima@g.softbank.co.jp






















Yamaya, et al.          Expires January 4, 2015                [Page 18]


Html markup produced by rfcmarkup 1.129d, available from https://tools.ietf.org/tools/rfcmarkup/