By submitting this Internet-Draft, each author represents that any applicable patent or other IPR claims of which he or she is aware have been or will be disclosed, and any of which he or she becomes aware will be disclosed, in accordance with Section 6 of BCP 79.
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF), its areas, and its working groups. Note that other groups may also distribute working documents as Internet-Drafts.
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as “work in progress.”
The list of current Internet-Drafts can be accessed at http://www.ietf.org/ietf/1id-abstracts.txt.
The list of Internet-Draft Shadow Directories can be accessed at http://www.ietf.org/shadow.html.
This Internet-Draft will expire on August 28, 2008.
DomainKeys Identified Mail (DKIM) associates a "responsible" identity with a message and provides a means of verifying that the association is legitimate. [RFC4871] (Allman, E., Callas, J., Delany, M., Libbey, M., Fenton, J., and M. Thomas, “DomainKeys Identified Mail (DKIM) Signatures,” May 2007.) DKIM defines a domain-level authentication framework for email using public-key cryptography and key server technology. This permits verifying the source or intermediary for a message, as well as the contents of messages. The ultimate goal of this framework is to permit a signing domain to assert responsibility for sending a message, thus proving and protecting the identity associated with the message and the integrity of the messages itself, while retaining the functionality of Internet email as it is known today. Such protection of email identity may assist in the global control of "spam" and "phishing". This document provides implementation, deployment, operational and migration considerations for DKIM.
2.1. DKIM Signing Software
2.2. General Coding Criteria for Cryptographic Applications
2.3. Mailing List Manager Software
2.4. Email Infrastructure Agents
2.5. Filtering Software
2.6. DNS Server Software
3.3. Key Management Deployment
3.4. Mailing Lists
3.5. Mail User Agent
3.6. Transition Strategy
3.7. Migrating from DomainKeys
4. On-going Operations
4.1. DNS Signature Record Installation Considerations
4.2. Private Key Management
5. Example Uses
5.1. Protection of Internal Mail
5.2. Recipient-based Assessments
5.3. DKIM Support in the Client
5.4. Per user signatures
6. Security Considerations
7. IANA Considerations
9. Informative References
§ Authors' Addresses
§ Intellectual Property and Copyright Statements
There are many areas to be considered when deploying DomainKeys Identified Mail (DKIM). This document provides practical tips for: those who are developing DKIM software, mailing list managers, filtering strategies based on the output from DKIM verification, and DNS servers; those who are deploying DKIM software, keys, mailing list software, and migrating from DomainKeys; and those who are responsible for the on-going operations of an email infrastructure that has deployed DKIM.
Signer implementations SHOULD provide a convenient means of generating DNS key records corresponding to the signer configuration. Support for automatic insertion of key records into the DNS is also highly desirable. If supported however, such mechanism(s) MUST be properly authenticated.
A means of verifying that the signer configuration is compatible with the signature policy is also highly desirable.
Disclosure of a private signature key component to a third party allows that third party to impersonate the sender. The protection of private signature key data is therefore a critical concern. Signers SHOULD support use of cryptographic hardware providing key management features.
NOTE: This section could possibly be changed into a reference to something else, such as another rfc.
Correct implementation of a cryptographic algorithm is a necessary but not a sufficient condition for the coding of cryptographic applications. Coding of cryptographic libraries requires close attention to security considerations that are unique to cryptographic applications.
In addition to the usual security coding considerations, such as avoiding buffer or integer overflow and underflow, implementers should pay close attention to management of cryptographic private keys and session keys, ensuring that these are correctly initialized and disposed of.
Operating system mechanisms that permit the confidentiality of private keys to be protected against other processes SHOULD be used when available. In particular, great care MUST be taken when releasing memory pages to the operating system to ensure that private key information is not disclosed to other processes.
Certain implementations of public key algorithms such as RSA may be vulnerable to a timing analysis attack.
Support for cryptographic hardware providing key management capabilities is strongly encouraged. In addition to offering performance benefits, many cryptographic hardware devices provide robust and verifiable management of private keys.
Fortunately appropriately designed and coded cryptographic libraries are available for most operating system platforms under license terms compatible with commercial, open source and free software license terms. Use of standard cryptographic libraries is strongly encouraged. These have been extensively tested, reduce development time and support a wide range of cryptographic hardware.
A mailing list often provides facilities to its administrator to manipulate parts of the mail messages that flow through the list. The desired goal is that messages flowing through the mailing list will be verifiable by the recipient as being from the list, or failing that, as being from the individual list members.
In most cases, the list and/or its mail host SHOULD add its own DKIM signature to list mail. This could be done in the list management software, in an outgoing MSA or MTA, or both. List management software often makes modifications to messages that will break incoming signatures, such as adding subject tags, adding message headers or footers, and adding, deleting, or reordering MIME parts. By adding its own signature after these modifications, the list provides a verifiable, recognizable signature for list recipients.
In some cases, the modifications made by the mailing list software are simple enough that signatures on incoming messages will still be verifiable after being remailed by the list. It is still preferable that the list sign its mail so that recipients can distinguish between mail sent through the list and mail sent directly to a list member. In the absence of a list signature, a recipient may still be able to recognize and use the original signatures of the list members.
It is expected that the most common venue for a DKIM implementation will be within the infrastructure of an organization's email service, such as a department or a boundary MTA.
- An MSA or Outbound MTA should allow for the automatic verification of the MTA configuration such that the MTA can generate an operator alert if it determines that it is (1) an edge MTA, and (2) configured to send email messages that do not comply with the published DKIM sending policy.
- An outbound MTA should be aware that users may employ MUAs that add their own signatures and be prepared to take steps necessary to ensure that the message sent is in compliance with the advertised email sending policy.
- An inbound MTA or an MDA that does not support DKIM should avoid modifying messages in ways that prevent verification by other MTAs, or MUAs to which the message may be forwarded.
- An inbound MTA or an MDA may incorporate an indication of the verification results into the message, such as using an Authentication-Results header. [I‑D.kucherawy‑sender‑auth‑header] (Kucherawy, M., “Message Header Field for Indicating Message Authentication Status,” January 2009.)
- An email intermediary is both an inbound and outbound MTA. Each of the requirements outlined in the sections relating to MTAs apply. If the intermediary modifies a message in a way that breaks the signature, the intermediary
- SHOULD deploy abuse filtering measures on the inbound mail, and
- MAY remove all signatures that will be broken
- In addition the intermediary MAY:
- Verify the message signature prior to modification.
- Incorporate an indication of the verification results into the message, such as using an Authentication-Results header. [I‑D.kucherawy‑sender‑auth‑header] (Kucherawy, M., “Message Header Field for Indicating Message Authentication Status,” January 2009.)
- Sign the modified message including the verification results (e.g., the Authentication-Results header).
Developers of filtering schemes designed to accept DKIM authentication results as input should be aware that their implementations will be subject to counter-attack by email abusers. The efficacy of a filtering scheme cannot therefore be determined by reference to static test vectors alone; resistance to counter attack must also be considered.
Naive learning algorithms that only consider the presence or absence of a verified DKIM signature, without considering more information about the message, are vulnerable to an attack in which a spammer or other malefactor signs all their mail, thus creating a large negative value for presence of a DKIM signature in the hope of discouraging widespread use.
If heuristic algorithms are employed, they should be trained on feature sets that sufficiently reveal the internal structure of the DKIM responses. In particular the algorithm should consider the domains purporting to claim responsibility for the signature, rather than the existence of a signature or not.
Unless a scheme can correlate the DKIM signature with accreditation or reputation data, the presence of a DKIM signature SHOULD be ignored.
At a minimum, a DNS server that handles queries for DKIM key records must allow the server administrators to add free-form TXT records. It would be better if the the DKIM records could be entered using a structured form, supporting the DKIM-specific fields.
This section describes the basic steps for introducing DKIM into an organization's email service operation. The considerations are divided between the generating DKIM signatures (Signing) and the processing of messages that contain a DKIM signature (Verifying).
Creating messages that have DKIM signatures requires a modification to only two portions of the email service:
The signing module uses the appropriate private key to create a signature. The means by which the signing module obtains the private key is not specified by DKIM. Given that DKIM is intended for use during email transit, rather than for long-term storage, it is expected that keys will be changed regularly. Clearly this means that key information should not be hard-coded into software.
A receiver attempting to verify a DKIM signature must obtain the public key that is associated with the signature for that message. The DKIM-Signature header in the message will specify the basic domain name doing the signing and the selector to be used for the specific public key. Hence, the relevant <selector>._domainkey.<domain-name> DNS record needs to contain a DKIM-related resource record (RR) that provides the public key information.
The administrator of the zone containing the relevant domain name adds this information. Initial DKIM DNS information is contained within TXT RRs. DNS administrative software varies considerably in its abilities to add new types of DNS records.
The module doing signing can be placed anywhere within an organization's trusted Administrative Management Domain (ADMD); common choices are expected to be department-level posting and delivering agents, as well as boundary MTAs to the open Internet. (Note that it is entirely acceptable for MUAs to perform signing and verification.) Hence the choice among the modules depends upon software development and administrative overhead tradeoffs. One perspective that helps resolve this choice is the difference between the flexibility of use by systems at (or close to) the MUA, versus the centralized control that is more easily obtained by implementing the mechanism "deeper" into the organization's email infrastructure, such as at its boundary MTA.
Every organization (ADMD) will have its own policies and practices for deciding when to sign messages and with what domain name and key (selector). Examples include signing all mail, signing mail from particular email addresses, or signing mail from particular sub-domains. Given this variability, and the likelihood that signing practices will change over time, it will be useful to have these decisions represented in some sort of configuration information, rather than being more deeply coded into the signing software.
Verifiers SHOULD treat the result of the verification step as an input to the message evaluation process rather than as providing a final decision. The knowledge that a message is authentically sent by a domain does not say much about the legitimacy of the message, unless the characteristics of the domain claiming responsibility are known.
In particular, verifiers SHOULD NOT automatically assume that an email message that does not contain a signature, or that contains a signature that does not verify, is forged. Verifiers should treat a signature that fails to verify the same as if no signature were present. NOTE: THE ABOVE MAY BE MODIFIED BY SSP/ASP
Verification is performed within an ADMD that wishes to make assessments based upon the DKIM signature's domain name. Any component within the ADMD that handles messages, whether in transit or being delivered, can do the verifying and subsequent assessments. Verification and assessment might occur within the same software mechanism, such as a Boundary MTA, or an MDA. Or they may be separated, such as having verification performed by the Boundary MTA and assessment performed by the MDA.
As with the signing process, choice of service venues for verification and assessment -- such as filtering or presentation to the recipient user -- depend on trade-offs for flexibility, control, and operational ease. An added concern is that the linkage between verification and assessment entails essential trust: the assessment module MUST have a strong basis for believing that the verification information is correct.
The primary means of publishing DKIM key information, initially, is initially through DNS TXT records. Some DNS client software might have problems obtaining these records; as DNS client software improves this will not be a concern.
In order for an assessment module to trust the information it receives about verification (e.g., Authentication-Results headers), it MUST eliminate verification information originating from outside the ADMD in which the assessment mechanism operates. As a matter of friendly practice, it is equally important to make sure that verification information generated within the ADMD not escape outside of it.
In most environments, the easiest way to enforce this is to place modules in the receiving and sending Boundary MTA(s) that strip any existing verification information.
More to be added
- Selectors are assigned according to the administrative needs of the signing domain, such as for rolling over to a new key or for delegating of the right to authenticate a portion of the namespace to a trusted third party.
- Examples include:
- It is intended that assessments of DKIM identities be based on the domain name, and not include the selector. This permits the selector to be used only for key administration, rather than having an effect on reputation assessment.
???????????????? 3rd party generates the public / private key pair and sends the public key to be published in the DNS.
All Signers SHOULD:
Signers wishing to avoid the use of Third-Party Signatures SHOULD do everything listed above, and also:
There are several forms of mailing lists, which interact with signing in different ways.
The first two cases act in obvious ways and do not require further discussion. The remainder of this session applies only to the third case.
Mailing List Managers should make every effort to ensure that messages that they relay and which have Valid Signatures upon receipt also have Valid Signatures upon retransmission. In particular, Mailing List Managers that modify the message in ways that break existing signatures SHOULD:
Mailing List Managers MAY:
DKIM is designed to support deployment and use in email components other than an MUA. However an MUA MAY also implement DKIM features directly.
- If an MUA is configured to send email directly, rather than relayed through an outbound MSA, the MUA SHOULD be considered as if it were an outbound MTA for the purposes of DKIM. An MUA MAY support signing even if mail is to be relayed through an outbound MSA. In this case the signature applied by the MUA may be in addition to any MSA signature.
- An MUA MAY rely on a report of a DKIM signature verification that took place at some point in the inbound MTA path (e.g., an Authentication-Results header), or an MUA MAY perform DKIM signature verification directly. A verifying MUA SHOULD allow for the case where mail is modified in the inbound MTA path.
It is common for components of an ADMD's email infrastructure to do violence to a message, such as to render a DKIM signature invalid. Hence, users of MUAs that support DKIM signing and/or verifying need a basis for knowing that their associated email infrastructure will not break a signature.
Deployment of a new signature algorithm without a 'flag day' requires a transition strategy such that signers and verifiers can phase in support for the new algorithm independently, and (if necessary) phase out support for the old algorithm independently.
[Note: this section assumes that a security policy mechanism exists. It is subject to change.]
DKIM achieves these requirements through two features: First a signed message may contain multiple signatures created by the same signer. Secondly the security policy layer allows the signing algorithms in use to be advertised, thus preventing a downgrade attack.
Let the old signing algorithm be A, the new signing algorithm be B. The sequence of events by which a Signer may introduce the new signing algorithm B, without disruption of service to legacy verifiers, is as follows:
- Signer advertises that it signs with algorithm A
- The signer tests new signing configuration
- Signer advertises that it signs with either algorithm A or algorithm B
- Signer removes advertisement for Algorithm A
- Signer waits for cached copies of earlier signature policy to expire
- Signer stops signing with Algorithm A
The actions of the verifier are independent of the signer's actions and do not need to be performed in a particular sequence. The verifier may make a decision to cease accepting algorithm A without first deploying support for algorithm B. Similarly a verifier may be upgraded to support algorithm B without requiring algorithm A to be withdrawn. The decisions of the verifier must make are therefore:
- DNS Records:
- DKIM is upwardly compatible with existing DomainKeys (DK) [RFC4870] (Delany, M., “Domain-Based Email Authentication Using Public Keys Advertised in the DNS (DomainKeys),” May 2007.) DNS records, so that a DKIM module does not automatically require additional DNS administration! However DKIM has enhanced the DomainKeys DNS key record format by adding several additional optional parameters.
- Boundary MTA:
- The principle use of DomainKeys is at Boundary MTAs. Because no operational transition is ever instantaneous, it is not adviseable for existing DomainKeys signers to switch to DKIM without continuing to perform DomainKeys signing. A signer should add a DKIM signature to a message that also has a DomainKeys signature, until such time as DomainKeys receive-side support is sufficiently reduced. With respect to signing policies, a reasonable, initial approach is to use DKIM signatures in the same way as DomainKeys signatures are already being used.
- DNS Client:
- DNS queries for the DKIM key record, use the same Domain Name naming conventions as were used for DomainKeys, and the same basic record format. No changes to the DNS client should be required.
- Verifying module:
- See the section on Signing above.
This section describes the basic steps for operation of email systems that use DKIM, after the capability has initially been deployed. The primary considerations are:
Even with use of the DNS, one challenge is that DNS record management is usually operated by an administrative staff that is different from those who operate an organization's email service. In order to ensure that DKIM DNS records are accurate, this imposes a requirement for careful coordination between the two operations groups.
The key point to remember is that the DNS DKIM selectors WILL and SHOULD be changed over time. Some reasons for changing DKIM selectors are well understood, while others are still theoretical. There are several schemes that may be used to determine the policies for changing DKIM selectors:
The reason for changing the selector periodically is usually related to the security exposure of a system. When the potential exposure of the private keys associated with the DKIM selector have reached sufficient levels, the selector should be changed. (It is unclear currently what kinds of metrics can be used to aid in deciding when the exposure has reached sufficient levels to warrant changing the selector.)
A primary consideration in changing the selector is remembering to change it. It needs to be a standard part of the operational staff Methods and Procedures for your systems. If they are separate, both the mail team and the DNS team will be involved in deploying new selectors.
When deploying a new selector, it needs to be phased in:
The time an unused selector should be kept in the DNS system is dependent on the reason it's being changed. If the private key has definitely been exposed, the corresponding selector should be removed immediately. Otherwise, longer periods are allowable.
A Domain Name is the basis for making differential quality assessments about a DKIM-signed message. It is reasonable for a single organization to have a variety of very different activities, which warrant a variety of very different assessments. A convenient way to distinguish among such activities is to sign with different domain names. That is, the organization should sign with sub-domain names that are used for different organizational activities.
Allowing third parties to sign email from your domain opens your system security to include the security of the third party's systems. At a minimum, you should not allow the third parties to use the same selector and private key as your main mail system. It is recommended that each third party be given their own private key and selector. This limits the exposure for any given private key, and minimizes the impact if any given private key were exposed.
The permissions of private key files must be carefully managed. If key management hardware support is available, it should be used. Auditing software should be used to periodically verify that the permissions on the private key files remain secure.
A DKIM signature tells the signature verifier that the owner of a particular domain name accepts responsibility for the message. Combining this information with information that allows the history of the domain name owner to be assessed may allow processing the message, based on the probability that the message is likely to be trustworthy, or not, without the need for heuristic content analysis.
One identity is particularly amenable to easy and accurate assessment: The organization's own identity. Members of an organization tend to trust messages that purport to be from within that organization. However Internet Mail does not provide a straightforward means of determining whether such mail is, in fact, from within the organization. DKIM can be used to remedy this exposure. If the organization signs all of its mail, then its boundary MTAs can look for mail purporting to be from the organization but does not contain a verifiable signature. Such mail can be presumed to be spurious.
WHAT ABOUT MAIL TO A MAILING LIST THAT COMES BACK WITH A BROKEN SIGNATURE????
Recipients of large volumes of email can internally generate reputation data for email senders. Recipients of smaller volumes of messages are likely to need to acquire reputation data from a third party. In either case the use of reputation data is intrinsically limited to email senders that have established a prior history of sending messages.
In fact, an email receiving service may be in a position to establish bilateral agreements with particular senders, such as business partners or trusted bulk sending services. Although it is not practical for each recipient to accredit every sender, the definition of core networks of explicit trust can be quite useful.
For scaling efficiency, it is appealing to use Trusted Third Party reputation and accreditation services, to allow an email sender to obtain a single assessment that is then recognized by every email recipient that recognizes the Trusted Third Party.
The DKIM specification is expected to be used primarily between Boundary MTAs, or other infrastructure components of the originating and receiving ADMDs. However there is nothing in DKIM that is specific to those venues. In particular, it should be possible to support signing and verifying in MUAs.
DKIM requires that all verifiers treat messages with signatures that do not verify as if they are unsigned. If verification in the client is to be acceptable to users, it is also essential that successful verification of a signature not result in a less than satisfactory user experience compared to leaving the message unsigned.
Although DKIM's use of domain names is optimized for a scope of organization-level signing, it is possible to administer sub-domains and/or selectors in a way that supports per-user signing.
- As stated earlier, it is important to distinguish between the use of selectors for differential administration of keys, versus the use of sub-domains for differential reputations.
As a constraint on an authorized DKIM signing agent, their associated key record can specify restrictions on the email addresses permitted to be signed with that domain and key. A typical intent of this feature is to allow a company to delegate the signing authority for bulk marketing communications without the risk of effectively delegating the authority to sign messages purporting to come from the domain-owning organization's CEO.
- Any scheme that involves maintenance of a significant number of public keys is likely to require infrastructure enhancements, to support that management. For example, a system in which the end user is required to generate a public key pair and transmit it to the DNS administrator out of band is not likely to meet acceptance criteria for either usability or security.
|[I-D.ietf-openpgp-rfc2440bis]||Callas, J., “OpenPGP Message Format,” draft-ietf-openpgp-rfc2440bis-22 (work in progress), April 2007 (TXT).|
|[I-D.kucherawy-sender-auth-header]||Kucherawy, M., “Message Header Field for Indicating Message Authentication Status,” draft-kucherawy-sender-auth-header-20 (work in progress), January 2009 (TXT).|
|[RFC0989]||Linn, J. and IAB Privacy Task Force, “Privacy enhancement for Internet electronic mail: Part I: Message encipherment and authentication procedures,” RFC 989, February 1987 (TXT).|
|[RFC1034]||Mockapetris, P., “Domain names - concepts and facilities,” STD 13, RFC 1034, November 1987.|
|[RFC1848]||Crocker, S., Galvin, J., Murphy, S., and N. Freed, “MIME Object Security Services,” RFC 1848, October 1995 (TXT).|
|[RFC1991]||Atkins, D., Stallings, W., and P. Zimmermann, “PGP Message Exchange Formats,” RFC 1991, August 1996 (TXT).|
|[RFC2440]||Callas, J., Donnerhacke, L., Finney, H., and R. Thayer, “OpenPGP Message Format,” RFC 2440, November 1998 (TXT, HTML, XML).|
|[RFC2821]||Klensin, J., “Simple Mail Transfer Protocol,” RFC 2821, April 2001 (TXT).|
|[RFC2822]||Resnick, P., “Internet Message Format,” RFC 2822, April 2001 (TXT).|
|[RFC3156]||Elkins, M., Del Torto, D., Levien, R., and T. Roessler, “MIME Security with OpenPGP,” RFC 3156, August 2001 (TXT).|
|[RFC3164]||Lonvick, C., “The BSD Syslog Protocol,” RFC 3164, August 2001 (TXT).|
|[RFC3851]||Ramsdell, B., “Secure/Multipurpose Internet Mail Extensions (S/MIME) Version 3.1 Message Specification,” RFC 3851, July 2004 (TXT).|
|[RFC4686]||Fenton, J., “Analysis of Threats Motivating DomainKeys Identified Mail (DKIM),” RFC 4686, September 2006 (TXT).|
|[RFC4870]||Delany, M., “Domain-Based Email Authentication Using Public Keys Advertised in the DNS (DomainKeys),” RFC 4870, May 2007 (TXT).|
|[RFC4871]||Allman, E., Callas, J., Delany, M., Libbey, M., Fenton, J., and M. Thomas, “DomainKeys Identified Mail (DKIM) Signatures,” RFC 4871, May 2007 (TXT).|
|200 Laurel Ave.|
|Middletown, NJ 07748|
|675 Spruce Dr.|
|Sunnyvale, CA 94086|
Copyright © The IETF Trust (2008).
This document is subject to the rights, licenses and restrictions contained in BCP 78, and except as set forth therein, the authors retain all their rights.
This document and the information contained herein are provided on an “AS IS” basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
The IETF takes no position regarding the validity or scope of any Intellectual Property Rights or other rights that might be claimed to pertain to the implementation or use of the technology described in this document or the extent to which any license under such rights might or might not be available; nor does it represent that it has made any independent effort to identify any such rights. Information on the procedures with respect to rights in RFC documents can be found in BCP 78 and BCP 79.
Copies of IPR disclosures made to the IETF Secretariat and any assurances of licenses to be made available, or the result of an attempt made to obtain a general license or permission for the use of such proprietary rights by implementers or users of this specification can be obtained from the IETF on-line IPR repository at http://www.ietf.org/ipr.
The IETF invites any interested party to bring to its attention any copyrights, patents or patent applications, or other proprietary rights that may cover technology that may be required to implement this standard. Please address the information to the IETF at firstname.lastname@example.org.