JOSE Working Group | M.B. Jones |
Internet-Draft | Microsoft |
Intended status: Standards Track | July 6, 2012 |
Expires: January 05, 2013 |
JSON Web Algorithms (JWA)
draft-ietf-jose-json-web-algorithms-03
The JSON Web Algorithms (JWA) specification enumerates cryptographic algorithms and identifiers to be used with the JSON Web Signature (JWS), JSON Web Encryption (JWE), and JSON Web Key (JWK) specifications.
This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet- Drafts is at http://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."
This Internet-Draft will expire on January 05, 2013.
Copyright (c) 2012 IETF Trust and the persons identified as the document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.
The JSON Web Algorithms (JWA) specification enumerates cryptographic algorithms and identifiers to be used with the JSON Web Signature (JWS) [JWS], JSON Web Encryption (JWE) [JWE], and JSON Web Key (JWK) [JWK] specifications. This specification also describes the semantics and operations that are specific to these algorithms and algorithm families.
Enumerating the algorithms and identifiers for them in this specification, rather than in the JWS, JWE, and JWK specifications, is intended to allow them to remain unchanged in the face of changes in the set of required, recommended, optional, and deprecated algorithms over time.
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in Key words for use in RFCs to Indicate Requirement Levels [RFC2119].
These terms defined by the JSON Web Signature (JWS) [JWS] specification are incorporated into this specification:
These terms defined by the JSON Web Encryption (JWE) [JWE] specification are incorporated into this specification:
These terms defined by the JSON Web Key (JWK) [JWK] specification are incorporated into this specification:
These terms are defined for use by this specification:
JWS uses cryptographic algorithms to digitally sign or create a Message Authentication Codes (MAC) of the contents of the JWS Header and the JWS Payload. The use of the following algorithms for producing JWSs is defined in this section.
The table below is the set of alg (algorithm) header parameter values defined by this specification for use with JWS, each of which is explained in more detail in the following sections:
alg Parameter Value | Digital Signature or MAC Algorithm | Implementation Requirements |
---|---|---|
HS256 | HMAC using SHA-256 hash algorithm | REQUIRED |
HS384 | HMAC using SHA-384 hash algorithm | OPTIONAL |
HS512 | HMAC using SHA-512 hash algorithm | OPTIONAL |
RS256 | RSASSA using SHA-256 hash algorithm | RECOMMENDED |
RS384 | RSASSA using SHA-384 hash algorithm | OPTIONAL |
RS512 | RSASSA using SHA-512 hash algorithm | OPTIONAL |
ES256 | ECDSA using P-256 curve and SHA-256 hash algorithm | RECOMMENDED+ |
ES384 | ECDSA using P-384 curve and SHA-384 hash algorithm | OPTIONAL |
ES512 | ECDSA using P-521 curve and SHA-512 hash algorithm | OPTIONAL |
none | No digital signature or MAC value included | REQUIRED |
All the names are short because a core goal of JWS is for the representations to be compact. However, there is no a priori length restriction on alg values.
The use of "+" in the Implementation Requirements indicates that the requirement strength is likely to be increased in a future version of the specification.
See Appendix Appendix A for a table cross-referencing the digital signature and MAC alg (algorithm) values used in this specification with the equivalent identifiers used by other standards and software packages.
Hash-based Message Authentication Codes (HMACs) enable one to use a secret plus a cryptographic hash function to generate a Message Authentication Code (MAC). This can be used to demonstrate that the MAC matches the hashed content, in this case the JWS Secured Input, which therefore demonstrates that whoever generated the MAC was in possession of the secret. The means of exchanging the shared key is outside the scope of this specification.
The algorithm for implementing and validating HMACs is provided in RFC 2104 [RFC2104]. This section defines the use of the HMAC SHA-256, HMAC SHA-384, and HMAC SHA-512 functions [SHS]. The alg (algorithm) header parameter values HS256, HS384, and HS512 are used in the JWS Header to indicate that the Encoded JWS Signature contains a base64url encoded HMAC value using the respective hash function.
A key of the same size as the hash output (for instance, 256 bits for HS256) or larger MUST be used with this algorithm.
The HMAC SHA-256 MAC is generated per RFC 2104, using SHA-256 as the hash algorithm "H", using the bytes of the ASCII [USASCII] representation of the JWS Secured Input as the "text" value, and using the shared key. The HMAC output value is the JWS Signature. The JWS signature is base64url encoded to produce the Encoded JWS Signature.
The HMAC SHA-256 MAC for a JWS is validated by computing an HMAC value per RFC 2104, using SHA-256 as the hash algorithm "H", using the bytes of the ASCII representation of the received JWS Secured input as the "text" value, and using the shared key. This computed HMAC value is then compared to the result of base64url decoding the received Encoded JWS signature. Alternatively, the computed HMAC value can be base64url encoded and compared to the received Encoded JWS Signature, as this comparison produces the same result as comparing the unencoded values. In either case, if the values match, the HMAC has been validated. If the validation fails, the JWS MUST be rejected.
Securing content with the HMAC SHA-384 and HMAC SHA-512 algorithms is performed identically to the procedure for HMAC SHA-256 - just using the corresponding hash algorithm with correspondingly larger minimum key sizes and result values: 384 bits each for HMAC SHA-384 and 512 bits each for HMAC SHA-512.
This section defines the use of the RSASSA-PKCS1-V1_5 digital signature algorithm as defined in Section 8.2 of RFC 3447 [RFC3447], (commonly known as PKCS #1), using SHA-256, SHA-384, or SHA-512 [SHS] as the hash functions. The alg (algorithm) header parameter values RS256, RS384, and RS512 are used in the JWS Header to indicate that the Encoded JWS Signature contains a base64url encoded RSA digital signature using the respective hash function.
A key of size 2048 bits or larger MUST be used with these algorithms.
The RSA SHA-256 digital signature is generated as follows:
The output is the Encoded JWS Signature for that JWS.
The RSA SHA-256 digital signature for a JWS is validated as follows:
Signing with the RSA SHA-384 and RSA SHA-512 algorithms is performed identically to the procedure for RSA SHA-256 - just using the corresponding hash algorithm with correspondingly larger result values: 384 bits for RSA SHA-384 and 512 bits for RSA SHA-512.
The Elliptic Curve Digital Signature Algorithm (ECDSA) [DSS] provides for the use of Elliptic Curve cryptography, which is able to provide equivalent security to RSA cryptography but using shorter key sizes and with greater processing speed. This means that ECDSA digital signatures will be substantially smaller in terms of length than equivalently strong RSA digital signatures.
This specification defines the use of ECDSA with the P-256 curve and the SHA-256 cryptographic hash function, ECDSA with the P-384 curve and the SHA-384 hash function, and ECDSA with the P-521 curve and the SHA-512 hash function. The P-256, P-384, and P-521 curves are defined in [DSS]. The alg (algorithm) header parameter values ES256, ES384, and ES512 are used in the JWS Header to indicate that the Encoded JWS Signature contains a base64url encoded ECDSA P-256 SHA-256, ECDSA P-384 SHA-384, or ECDSA P-521 SHA-512 digital signature, respectively.
The ECDSA P-256 SHA-256 digital signature is generated as follows:
The output is the Encoded JWS Signature for the JWS.
The ECDSA P-256 SHA-256 digital signature for a JWS is validated as follows:
Note that ECDSA digital signature contains a value referred to as K, which is a random number generated for each digital signature instance. This means that two ECDSA digital signatures using exactly the same input parameters will output different signature values because their K values will be different. A consequence of this is that one cannot validate an ECDSA signature by recomputing the signature and comparing the results.
Signing with the ECDSA P-384 SHA-384 and ECDSA P-521 SHA-512 algorithms is performed identically to the procedure for ECDSA P-256 SHA-256 - just using the corresponding hash algorithm with correspondingly larger result values. For ECDSA P-384 SHA-384, R and S will be 48 bytes each, resulting in a 96 byte array. For ECDSA P-521 SHA-512, R and S will be 66 bytes each (so they can represent a 521-bit integer), resulting in a 132 byte array.
JWSs MAY also be created that do not provide integrity protection. Such a JWS is called a "Plaintext JWS". Plaintext JWSs MUST use the alg value none, and are formatted identically to other JWSs, but with an empty JWS Signature value.
Additional algorithms MAY be used to protect JWSs with corresponding alg (algorithm) header parameter values being defined to refer to them. New alg header parameter values SHOULD either be registered in the IANA JSON Web Signature and Encryption Algorithms registry Section 6.1 or be a URI that contains a Collision Resistant Namespace. In particular, it is permissible to use the algorithm identifiers defined in XML DSIG [RFC3275], XML DSIG 2.0 [W3C.CR-xmldsig-core2-20120124], and related specifications as alg values.
As indicated by the common registry, JWSs and JWEs share a common alg value space. The values used by the two specifications MUST be distinct, as the alg value MAY be used to determine whether the object is a JWS or JWE.
Likewise, additional reserved header parameter names MAY be defined via the IANA JSON Web Signature and Encryption Header Parameters registry [JWS]. As indicated by the common registry, JWSs and JWEs share a common header parameter space; when a parameter is used by both specifications, its usage must be compatible between the specifications.
JWE uses cryptographic algorithms to encrypt the Content Master Key (CMK) and the Plaintext. This section specifies a set of specific algorithms for these purposes.
The table below is the set of alg (algorithm) header parameter values that are defined by this specification for use with JWE. These algorithms are used to encrypt the CMK, producing the JWE Encrypted Key, or to use key agreement to agree upon the CMK.
alg Parameter Value | Key Encryption or Agreement Algorithm | Implementation Requirements |
---|---|---|
RSA1_5 | RSAES-PKCS1-V1_5 [RFC3447] | REQUIRED |
RSA-OAEP | RSAES using Optimal Asymmetric Encryption Padding (OAEP) [RFC3447], with the default parameters specified by RFC 3447 in Section A.2.1 | OPTIONAL |
ECDH-ES | Elliptic Curve Diffie-Hellman Ephemeral Static [RFC6090], and using the Concat KDF, as defined in Section 5.8.1 of [NIST.800-56A], where the Digest Method is SHA-256 and all OtherInfo parameters are the empty bit string | RECOMMENDED+ |
A128KW | Advanced Encryption Standard (AES) Key Wrap Algorithm [RFC3394] using 128 bit keys | RECOMMENDED |
A256KW | AES Key Wrap Algorithm using 256 bit keys | RECOMMENDED |
The use of "+" in the Implementation Requirements indicates that the requirement strength is likely to be increased in a future version of the specification.
The table below is the set of enc (encryption method) header parameter values that are defined by this specification for use with JWE. These algorithms are used to encrypt the Plaintext, which produces the Ciphertext.
enc Parameter Value | Block Encryption Algorithm | Implementation Requirements |
---|---|---|
A128CBC | Advanced Encryption Standard (AES) in Cipher Block Chaining (CBC) mode with PKCS #5 padding [AES] [NIST.800-38A] using 128 bit keys | REQUIRED |
A256CBC | AES in CBC mode with PKCS #5 padding using 256 bit keys | REQUIRED |
A128GCM | AES in Galois/Counter Mode (GCM) [AES] [NIST.800-38D] using 128 bit keys | RECOMMENDED |
A256GCM | AES GCM using 256 bit keys | RECOMMENDED |
All the names are short because a core goal of JWE is for the representations to be compact. However, there is no a priori length restriction on alg values.
See Appendix Appendix B for a table cross-referencing the encryption alg (algorithm) and enc (encryption method) values used in this specification with the equivalent identifiers used by other standards and software packages.
The table below is the set of int (integrity algorithm) header parameter values defined by this specification for use with JWE. Note that these are the HMAC SHA subset of the alg (algorithm) header parameter values defined for use with JWS Section 3.1.
int Parameter Value | Algorithm | Implementation Requirements |
---|---|---|
HS256 | HMAC using SHA-256 hash algorithm | REQUIRED |
HS384 | HMAC using SHA-384 hash algorithm | OPTIONAL |
HS512 | HMAC using SHA-512 hash algorithm | OPTIONAL |
The table below is the set of kdf (key derivation function) header parameter values defined by this specification for use with JWE.
kdf Parameter Value | Algorithm | Implementation Requirements |
---|---|---|
CS256 | Concat KDF, as defined in Section 5.8.1 of [NIST.800-56A], with parameters per Section 4.12, using SHA-256 as the digest method | REQUIRED |
CS384 | Concat KDF with parameters per Section 4.12, using SHA-384 as the digest method | OPTIONAL |
CS512 | Concat KDF with parameters per Section 4.12, using SHA-512 as the digest method | OPTIONAL |
This section defines the specifics of encrypting a JWE CMK with RSAES-PKCS1-V1_5 [RFC3447]. The alg header parameter value RSA1_5 is used in this case.
A key of size 2048 bits or larger MUST be used with this algorithm.
This section defines the specifics of encrypting a JWE CMK with RSAES using Optimal Asymmetric Encryption Padding (OAEP) [RFC3447], with the default parameters specified by RFC 3447 in Section A.2.1. The alg header parameter value RSA-OAEP is used in this case.
A key of size 2048 bits or larger MUST be used with this algorithm.
This section defines the specifics of agreeing upon a JWE CMK with Elliptic Curve Diffie-Hellman Ephemeral Static [RFC6090], and using the Concat KDF, as defined in Section 5.8.1 of [NIST.800-56A], where the Digest Method is SHA-256 and all OtherInfo parameters are the empty bit string. The alg header parameter value ECDH-ES is used in this case.
The output of the Concat KDF MUST be a key of the same length as that used by the enc algorithm.
A new epk (ephemeral public key) value MUST be generated for each key agreement transaction.
This section defines the specifics of encrypting a JWE CMK with the Advanced Encryption Standard (AES) Key Wrap Algorithm [RFC3394] using 128 or 256 bit keys. The alg header parameter values A128KW or A256KW are used in this case.
This section defines the specifics of encrypting the JWE Plaintext with Advanced Encryption Standard (AES) in Cipher Block Chaining (CBC) mode with PKCS #5 padding [AES] [NIST.800-38A] using 128 or 256 bit keys. The enc header parameter values A128CBC or A256CBC are used in this case.
Use of an initialization vector of size 128 bits is REQUIRED with this algorithm.
This section defines the specifics of encrypting the JWE Plaintext with Advanced Encryption Standard (AES) in Galois/Counter Mode (GCM) [AES] [NIST.800-38D] using 128 or 256 bit keys. The enc header parameter values A128GCM or A256GCM are used in this case.
Use of an initialization vector of size 96 bits is REQUIRED with this algorithm.
The "additional authenticated data" parameter is used to secure the header and key values, as specified for AEAD algorithms in Section 5 of [JWE].
The requested size of the "authentication tag" output MUST be 128 bits, regardless of the key size.
As GCM is an AEAD algorithm, the JWE Integrity Value is set to be the "authentication tag" value produced by the encryption.
This section defines the specifics of computing a JWE Integrity Value with HMAC SHA-256, HMAC SHA-384, or HMAC SHA-512 [SHS]. Other than as stated below, these computations are performed identically to those specified in Section 3.2.
A key of the same size as the hash output (for instance, 256 bits for HS256) MUST be used with this algorithm.
Per Section 9 of [JWE], the JWS Secured Input value used contains the header, encrypted key, and ciphertext.
The key derivation process derives CEK and CIK values from the CMK. It uses as a primitive a Key Derivation Function (KDF) which notionally takes three arguments: [NIST.800-56A], where the Digest Method is one of SHA-256, SHA-384, or SHA-512, the SuppPubInfo parameter is the Label, and the remaining OtherInfo parameters are the empty bit string.
This section defines the specifics of using the Concat KDF, as defined in Section 5.8.1 of
The kdf (key derivation function) header parameter values CS256, CS384, and CS512 are respectively used in the JWE Header to indicate the use of the Concat KDF as above with the respective digest methods. If the kdf header parameter is omitted when an AEAD enc algorithm is not used, this is equivalent to specifying use of the CS256 key derivation function.
To compute the CEK from the CMK, the ASCII label "Encryption" ([69, 110, 99, 114, 121, 112, 116, 105, 111, 110]) is used. Use the key size for the enc algorithm as the CEK desired key length.
To compute the CIK from the CMK, the ASCII label "Integrity" ([73, 110, 116, 101, 103, 114, 105, 116, 121]) is used. Use the minimum key size for the int algorithm (for instance, 256 bits for HS256) as the CIK desired key length.
Additional algorithms MAY be used to protect JWEs with corresponding alg (algorithm), enc (encryption method), and int (integrity algorithm) header parameter values being defined to refer to them. New alg, enc, and int header parameter values SHOULD either be registered in the IANA JSON Web Signature and Encryption Algorithms registry Section 6.1 or be a URI that contains a Collision Resistant Namespace. In particular, it is permissible to use the algorithm identifiers defined in XML Encryption [W3C.REC-xmlenc-core-20021210], XML Encryption 1.1 [W3C.CR-xmlenc-core1-20120313], and related specifications as alg, enc, and int values.
As indicated by the common registry, JWSs and JWEs share a common alg value space. The values used by the two specifications MUST be distinct, as the alg value MAY be used to determine whether the object is a JWS or JWE.
Likewise, additional reserved header parameter names MAY be defined via the IANA JSON Web Signature and Encryption Header Parameters registry [JWS]. As indicated by the common registry, JWSs and JWEs share a common header parameter space; when a parameter is used by both specifications, its usage must be compatible between the specifications.
A JSON Web Key (JWK) [JWK] is a JavaScript Object Notation (JSON) [RFC4627] data structure that represents a public key. A JSON Web Key Set (JWK Set) is a JSON data structure for representing a set of JWKs. This section specifies a set of algorithm families to be used for those public keys and the algorithm family specific parameters for representing those keys.
The table below is the set of alg (algorithm family) parameter values that are defined by this specification for use in JWKs.
alg Parameter Value | Algorithm Family | Implementation Requirements |
---|---|---|
EC | Elliptic Curve [DSS] key family | RECOMMENDED+ |
RSA | RSA [RFC3447] key family | REQUIRED |
All the names are short because a core goal of JWK is for the representations to be compact. However, there is no a priori length restriction on alg values.
The use of "+" in the Implementation Requirements indicates that the requirement strength is likely to be increased in a future version of the specification.
JWKs can represent Elliptic Curve [DSS] keys. In this case, the alg member value MUST be EC. Furthermore, these additional members MUST be present:
The crv (curve) member identifies the cryptographic curve used with the key. Curve values from [DSS] used by this specification are: crv values MAY be used, provided they are understood by implementations using that Elliptic Curve key. The crv value is case sensitive. Its value MUST be a string.
Additional
The x (x coordinate) member contains the x coordinate for the elliptic curve point. It is represented as the base64url encoding of the coordinate's big endian representation.
The y (y coordinate) member contains the y coordinate for the elliptic curve point. It is represented as the base64url encoding of the coordinate's big endian representation.
JWKs can represent RSA [RFC3447] keys. In this case, the alg member value MUST be RSA. Furthermore, these additional members MUST be present:
The mod (modulus) member contains the modulus value for the RSA public key. It is represented as the base64url encoding of the value's unsigned big endian representation.
The exp (exponent) member contains the exponent value for the RSA public key. It is represented as the base64url encoding of the value's unsigned big endian representation.
Public keys using additional algorithm families MAY be represented using JWK data structures with corresponding alg (algorithm family) parameter values being defined to refer to them. New alg parameter values SHOULD either be registered in the IANA JSON Web Key Algorithm Families registry Section 6.2 or be a URI that contains a Collision Resistant Namespace.
Likewise, parameters for representing keys for additional algorithm families or additional key properties SHOULD either be registered in the IANA JSON Web Key Parameters registry [JWK] or be a URI that contains a Collision Resistant Namespace.
The following registration procedure is used for all the registries established by this specification.
Values are registered with a Specification Required [RFC5226] after a two week review period on the [TBD]@ietf.org mailing list, on the advice of one or more Designated Experts. However, to allow for the allocation of values prior to publication, the Designated Expert(s) may approve registration once they are satisfied that such a specification will be published.
Registration requests must be sent to the [TBD]@ietf.org mailing list for review and comment, with an appropriate subject (e.g., "Request for access token type: example"). [[ Note to RFC-EDITOR: The name of the mailing list should be determined in consultation with the IESG and IANA. Suggested name: jose-reg-review. ]]
Within the review period, the Designated Expert(s) will either approve or deny the registration request, communicating this decision to the review list and IANA. Denials should include an explanation and, if applicable, suggestions as to how to make the request successful.
IANA must only accept registry updates from the Designated Expert(s), and should direct all requests for registration to the review mailing list.
This specification establishes the IANA JSON Web Signature and Encryption Algorithms registry for values of the JWS and JWE alg (algorithm), enc (encryption method), and int (integrity algorithm) header parameters. The registry records the algorithm name, the algorithm usage locations from the set alg, enc, and int, implementation requirements, and a reference to the specification that defines it. The same algorithm name may be registered multiple times, provided that the sets of usage locations are disjoint. The implementation requirements of an algorithm may be changed over time by the Designated Experts(s) as the cryptographic landscape evolves, for instance, to change the status of an algorithm to DEPRECATED, or to change the status of an algorithm from OPTIONAL to RECOMMENDED or REQUIRED.
This specification establishes the IANA JSON Web Key Algorithm Families registry for values of the JWK alg (algorithm family) parameter. The registry records the alg value and a reference to the specification that defines it. This specification registers the values defined in Section 5.1.
This specification registers the parameter names defined in Section 5.2 and Section 5.3 in the IANA JSON Web Key Parameters registry [JWK].
All of the security issues faced by any cryptographic application must be faced by a JWS/JWE/JWK agent. Among these issues are protecting the user's private key, preventing various attacks, and helping the user avoid mistakes such as inadvertently encrypting a message for the wrong recipient. The entire list of security considerations is beyond the scope of this document, but some significant concerns are listed here.
The security considerations in [AES], [DSS], [JWE], [JWK], [JWS], [NIST.800-38A], [NIST.800-38D], [NIST.800-56A], [RFC2104], [RFC3394], [RFC3447], [RFC5116], [RFC6090], and [SHS] apply to this specification.
Eventually the algorithms and/or key sizes currently described in this specification will no longer be considered sufficiently secure and will be removed. Therefore, implementers and deployments must be prepared for this eventuality.
Algorithms of matching strength should be used together whenever possible. For instance, when AES Key Wrap is used with a given key size, using the same key size for AES CBC or GCM is recommended. Likewise, when AES CBC is used with a 128 bit key, using HMAC SHA-256 as the integrity algorithm is recommended, whereas when AES CBC is used with a 256 bit key, using HMAC SHA-512 as the integrity algorithm is recommended.
While Section 8 of RFC 3447 [RFC3447] explicitly calls for people not to adopt RSASSA-PKCS1 for new applications and instead requests that people transition to RSASSA-PSS, this specification does include RSASSA-PKCS1, for interoperability reasons, because it commonly implemented.
Keys used with RSAES-PKCS1-v1_5 must follow the constraints in Section 7.2 of RFC 3447 [RFC3447]. In particular, keys with a low public key exponent value must not be used.
Plaintext JWSs (JWSs that use the alg value none) provide no integrity protection. Thus, they must only be used in contexts where the payload is secured by means other than a digital signature or MAC value, or need not be secured.
Receiving agents that validate signatures and sending agents that encrypt messages need to be cautious of cryptographic processing usage when validating signatures and encrypting messages using keys larger than those mandated in this specification. An attacker could send certificates with keys that would result in excessive cryptographic processing, for example, keys larger than those mandated in this specification, which could swamp the processing element. Agents that use such keys without first validating the certificate to a trust anchor are advised to have some sort of cryptographic resource management system to prevent such attacks.
[[ to be removed by the RFC editor before publication as an RFC ]]
The following items remain to be considered or done in this draft:
This appendix contains a table cross-referencing the digital signature and MAC alg (algorithm) values used in this specification with the equivalent identifiers used by other standards and software packages. See XML DSIG [RFC3275], XML DSIG 2.0 [W3C.CR-xmldsig-core2-20120124], and Java Cryptography Architecture [JCA] for more information about the names defined by those documents.
Algorithm | JWS | XML DSIG | JCA | OID |
---|---|---|---|---|
HMAC using SHA-256 hash algorithm | HS256 | http://www.w3.org/2001/04/xmldsig-more#hmac-sha256 | HmacSHA256 | 1.2.840.113549.2.9 |
HMAC using SHA-384 hash algorithm | HS384 | http://www.w3.org/2001/04/xmldsig-more#hmac-sha384 | HmacSHA384 | 1.2.840.113549.2.10 |
HMAC using SHA-512 hash algorithm | HS512 | http://www.w3.org/2001/04/xmldsig-more#hmac-sha512 | HmacSHA512 | 1.2.840.113549.2.11 |
RSASSA using SHA-256 hash algorithm | RS256 | http://www.w3.org/2001/04/xmldsig-more#rsa-sha256 | SHA256withRSA | 1.2.840.113549.1.1.11 |
RSASSA using SHA-384 hash algorithm | RS384 | http://www.w3.org/2001/04/xmldsig-more#rsa-sha384 | SHA384withRSA | 1.2.840.113549.1.1.12 |
RSASSA using SHA-512 hash algorithm | RS512 | http://www.w3.org/2001/04/xmldsig-more#rsa-sha512 | SHA512withRSA | 1.2.840.113549.1.1.13 |
ECDSA using P-256 curve and SHA-256 hash algorithm | ES256 | http://www.w3.org/2001/04/xmldsig-more#ecdsa-sha256 | SHA256withECDSA | 1.2.840.10045.4.3.2 |
ECDSA using P-384 curve and SHA-384 hash algorithm | ES384 | http://www.w3.org/2001/04/xmldsig-more#ecdsa-sha384 | SHA384withECDSA | 1.2.840.10045.4.3.3 |
ECDSA using P-521 curve and SHA-512 hash algorithm | ES512 | http://www.w3.org/2001/04/xmldsig-more#ecdsa-sha512 | SHA512withECDSA | 1.2.840.10045.4.3.4 |
This appendix contains a table cross-referencing the alg (algorithm) and enc (encryption method) values used in this specification with the equivalent identifiers used by other standards and software packages. See XML Encryption [W3C.REC-xmlenc-core-20021210], XML Encryption 1.1 [W3C.CR-xmlenc-core1-20120313], and Java Cryptography Architecture [JCA] for more information about the names defined by those documents.
Algorithm | JWE | XML ENC | JCA |
---|---|---|---|
RSAES-PKCS1-V1_5 | RSA1_5 | http://www.w3.org/2001/04/xmlenc#rsa-1_5 | RSA/None/PKCS1Padding |
RSAES using Optimal Asymmetric Encryption Padding (OAEP) | RSA-OAEP | http://www.w3.org/2001/04/xmlenc#rsa-oaep-mgf1p | RSA/None/OAEPWithSHA-1AndMGF1Padding |
Elliptic Curve Diffie-Hellman Ephemeral Static | ECDH-ES | http://www.w3.org/2009/xmlenc11#ECDH-ES | |
Advanced Encryption Standard (AES) Key Wrap Algorithm using 128 bit keys | A128KW | http://www.w3.org/2001/04/xmlenc#kw-aes128 | |
AES Key Wrap Algorithm using 256 bit keys | A256KW | http://www.w3.org/2001/04/xmlenc#kw-aes256 | |
AES in Cipher Block Chaining (CBC) mode with PKCS #5 padding using 128 bit keys | A128CBC | http://www.w3.org/2001/04/xmlenc#aes128-cbc | AES/CBC/PKCS5Padding |
AES in CBC mode with PKCS #5 padding using 256 bit keys | A256CBC | http://www.w3.org/2001/04/xmlenc#aes256-cbc | AES/CBC/PKCS5Padding |
AES in Galois/Counter Mode (GCM) using 128 bit keys | A128GCM | http://www.w3.org/2009/xmlenc11#aes128-gcm | AES/GCM/NoPadding |
AES GCM using 256 bit keys | A256GCM | http://www.w3.org/2009/xmlenc11#aes256-gcm | AES/GCM/NoPadding |
Solutions for signing and encrypting JSON content were previously explored by Magic Signatures [MagicSignatures], JSON Simple Sign [JSS], Canvas Applications [CanvasApp], JSON Simple Encryption [JSE], and JavaScript Message Security Format [I-D.rescorla-jsms], all of which influenced this draft. Dirk Balfanz, John Bradley, Yaron Y. Goland, John Panzer, Nat Sakimura, and Paul Tarjan all made significant contributions to the design of this specification and its related specifications.
[[ to be removed by the RFC editor before publication as an RFC ]]
-03
-02
-01
-00