PairingFriendly Curves
Lepidum
yumi.sakemi@lepidum.co.jp
NTT
tetsutaro.kobayashi.dr@hco.ntt.co.jp
NTT
tsunekazu.saito.hg@hco.ntt.co.jp
Stanford University
rsw@cs.stanford.edu
IRTF
CFRG
InternetDraft
Request for Comments
PairingFriendly Curves
Eliptic Curve Cryptgraphy
Pairingbased cryptography, a subfield of elliptic curve cryptography, has received attention due to its flexible and practical functionality. Pairings are special maps defined using elliptic curves and it can be applied to construct several cryptographic protocols such as identitybased encryption, attributebased encryption, and so on. At CRYPTO 2016, Kim and Barbulescu proposed an efficient number field sieve algorithm named exTNFS for the discrete logarithm problem in a finite field. Several types of pairingfriendly curves such as BarretoNaehrig curves are affected by the attack. In particular, a BarretoNaehrig curve with a 254bit characteristic was adopted by a lot of cryptographic libraries as a parameter of 128bit security, however, it ensures no more than the 100bit security level due to the effect of the attack. In this memo, we list the security levels of certain pairingfriendly curves, and motivate our choices of curves. First, we summarize the adoption status of pairingfriendly curves in standards, libraries and applications, and classify them in the 128bit, 192bit, and 256bit security levels. Then, from the viewpoints of "security" and "widely used", we select the recommended pairingfriendly curves considering exTNFS.
Introduction
Pairingbased Cryptography
Elliptic curve cryptography is an important area in currently deployed cryptography. The cryptographic algorithms based on elliptic curve cryptography, such as the Elliptic Curve Digital Signature Algorithm (ECDSA), are widely used in many applications.
Pairingbased cryptography, a subfield of elliptic curve cryptography, has attracted much attention due to its flexible and practical functionality.
Pairings are special maps defined using elliptic curves.
Pairings are fundamental in the construction of several cryptographic algorithms and protocols such as identitybased encryption (IBE), attributebased encryption (ABE), authenticated key exchange (AKE), short signatures, and so on. Several applications of pairingbased cryptography are currently in practical use.
As the importance of pairings grows, elliptic curves where pairings are efficiently computable are studied and the special curves called pairingfriendly curves are proposed.
Applications of Pairingbased Cryptography
Several applications using pairingbased cryptography have already been standardized and deployed. We list here some examples of applications available in the real world.
IETF published RFCs for pairingbased cryptography such as IdentityBased Cryptography , SakaiKasahara Key Encryption (SAKKE) , and IdentityBased Authenticated Key Exchange (IBAKE) .
SAKKE is applied to Multimedia Internet KEYing (MIKEY) and used in 3GPP .
Pairingbased key agreement protocols are standardized in ISO/IEC .
In , a key agreement scheme by Joux , identitybased key agreement schemes by SmartChenCheng and FujiokaSuzukiUstaoglu are specified.
MIRACL implements MPin, a multifactor authentication protocol .
The MPin protocol includes a type of zeroknowledge proof, where pairings are used for its construction.
The Trusted Computing Group (TCG) specified the Elliptic Curve Direct Anonymous Attestation (ECDAA) in the specification of a Trusted Platform Module (TPM) .
ECDAA is a protocol for proving the attestation held by a TPM to a verifier without revealing the attestation held by that TPM. Pairings are used in the construction of ECDAA. FIDO Alliance and W3C also published an ECDAA algorithm similar to TCG.
Intel introduced Intel Enhanced Privacy ID (EPID) that enables remote attestation of a hardware device while preserving the privacy of the device as part of the functionality of Intel Software Guard Extensions (SGX) . They extended TPM ECDAA to realize such functionality. A pairingbased EPID was proposed and distributed along with Intel SGX applications.
Zcash implemented their own zeroknowledge proof algorithm named ZeroKnowledge Succinct NonInteractive Argument of Knowledge (zkSNARKs) . zkSNARKs are used for protecting the privacy of transactions of Zcash. They use pairings to construct zkSNARKs.
Cloudflare introduced Geo Key Manager to restrict distribution of customers' private keys to a subset of their data centers. To achieve this functionality, ABE is used, and pairings take a role as a building block. In addition, Cloudflare published a new cryptographic library, the Cloudflare Interoperable, Reusable Cryptographic Library (CIRCL) in 2019. They plan to include securely implemented subroutines for pairing computations on certain secure pairingfriendly curves in CIRCL.
Currently, BonehLynnShacham (BLS) signature schemes are being standardized
and utilized in several blockchain projects
such as Ethereum , Algorand , Chia Network , and DFINITY .
The aggregation functionality of BLS signatures is effective for their applications of decentralization and scalability.
Motivation and Contribution
At CRYPTO 2016, Kim and Barbulescu proposed an efficient number field sieve (NFS) algorithm for the discrete logarithm problem in a finite field GF(p^k) .
The attack improves the polynomial selection that is the first step in the number field sieve algorithm for discrete logarithms in GF(p^k).
The idea is applicable when the embedding degree k is a composite that satisfies k = i*j (gcd (i, j) = 1, i, j> 1).
The basic idea is based on the equality GF(p^k) = (GF(p^i)^j) and one of the improvement for reducing the amount of cost for solving the discrete logarithm problem is using subfield calculation.
Several types of pairingfriendly curves such as BarretoNaehrig curves (BN curves) and BarretoLynnScott curves (BLS curves) are affected by the attack, since a pairingfriendly curve suitable for cryptographic applications requires that the discrete logarithm problem is sufficiently difficult.
Please refer to for detailed ideas and calculation algorithms of the attack by Kim.
In particular, BN254, which is a BN curve with a 254bit characteristic effective for pairing calculations, was adopted by a lot of cryptographic libraries as a parameter of the 128bit security level, however, BN254 ensures no more than the 100bit security level due to the effect of the attack, where the security levels described in this memo correspond to the security strength of NIST recommendation .
To resolve this effect immediately, several research groups and implementers reevaluated the security of pairingfriendly curves and they respectively proposed various curves that are secure against the attack .
In this memo, we list the security levels of certain pairingfriendly curves, and motivate our choices of curves. First, we summarize the adoption status of pairingfriendly curves in international standards, libraries and applications, and classify them in the 128bit, 192bit, and 256bit security levels. Then, from the viewpoints of "security" and "widely used", pairingfriendly curves corresponding to each security level are selected in accordance with the security evaluation by Barbulescu and Duquesne .
As a result, we recommend the BLS curve with 381bit characteristic of embedding degree 12 and the BN curve with the 462bit characteristic for the 128bit security level, and the BLS curves of embedding degree 48 with the 581bit characteristic for the 256bit security level. This memo shows their specific test vectors.
Requirements Terminology
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 when, and only when, they appear in all capitals, as shown here.
Preliminaries
Elliptic Curves
Let p be a prime number and q = p^n for a natural number n > 0, where p at least 5.
Let GF(q) be a finite field.
The curve defined by the following equation E is called an elliptic curve:
and a and b in GF(q) satisfy the discriminant inequality 4 * a^3 + 27 * b^2 != 0 mod q.
This is called the Weierstrass normal form of an elliptic curve.
A solution (x,y) to the equation E can be thought of as a point on the corresponding curve. For a natural number k, we define the set of (GF(q^k))rational points of E, denoted by E(GF(q^k)), to be the set of all solutions (x,y) in GF(q^k), together with a 'point at infinity' O_E, which is defined to lie on every vertical line passing through the curve E.
The set E(GF(q^k)) forms a group under a group law that can be defined geometrically as follows. For P and Q in E(GF(q^k)) define P + Q to be the reflection around the xaxis of the unique third point R of intersection of the straight line passing through P and Q with the curve E. If the straight line is tangent to E, we say that it passes through that point twice. The identity of this group is the point at infinity O_E. We also define scalar multiplication [K]P for a positive integer K as the point P added to itself (K1) times. Here, [0]P becomes the point at infinity O_E and the relation [K]P = ([K]P) is satisfied.
Pairings
A pairing is a bilinear map defined on two subgroups of rational points of an elliptic curve. Examples include the Weil pairing, the Tate pairing, the optimal Ate pairing , and so on.
The optimal Ate pairing is considered to be the most efficient to compute and is the one that is most commonly used for practical implementation.
Let E be an elliptic curve defined over a prime field GF(p). Let k be the minimum integer for which r is a divisor of p^k  1; this is called the embedding degree of E over GF(p). Let G_1 be a cyclic subgroup of E(GF(p)) of order r, there also exists a cyclic subgroup of E(GF(p^k)) of order r, define this to be G_2. Let d be a divisor of k and E' be an elliptic curve defined over GF(p^(k/d)). If an isomorphism from E' to E(GF(p^k)) exists, then E' is called the twist of E. It can sometimes be convenient for efficiency to do the computations of G_2 in the twist E', and so consider G_2 to instead be a subgroup of E'. Let G_T be an order r subgroup of the multiplicative group (GF(p^k))^*; this exists by definition of k.
A pairing is defined as a bilinear map e: (G_1, G_2) > G_T
satisfying the following properties:
 Bilinearity: for any S in G_1, T in G_2, and integers K and L, e([K]S, [L]T) = e(S, T)^{K * L}.
 Nondegeneracy: for any T in G_2, e(S, T) = 1 if and only if S = O_E.
Similarly, for any S in G_1, e(S, T) = 1 if and only if T = O_E.
In applications, it is also necessary that for any S in G_1 and T in G_2, this bilinear map is efficiently computable.
We define some of the terminology used in this memo as follows:
 GF(p):

a finite field with characteristic p.
 GF(p^k):

an extension field of degree k.
 (GF(p))*:

a multiplicative group of GF(p).
 (GF(p^k))*:

a multiplicative group of GF(p^k).
 b:

a primitive element of the multiplicative group (GF(p))^*.
 O_E:

the point at infinity over an elliptic curve E.
 E(GF(p^k)):

the group of GF(p^k)rational points of E.
 #E(GF(p^k)):

the number of GF(p^k)rational points of E.
 r:

the order of G_1 and G_2.
 BP:

a point in G_1. (The 'base point' of a cyclic subgroup of G_1)
 h:

the cofactor h = #E(GF(p)) / r, where gcd(h, r)=1.
BarretoNaehrig Curves
A BN curve is a family of pairingfriendly curves proposed in 2005. A pairing over BN curves constructs optimal Ate pairings.
A BN curve is defined by elliptic curves E and E' parameterized by a wellchosen integer t.
E is defined over GF(p), where p is a prime number and at least 5, and E(GF(p)) has a subgroup of prime order r.
The characteristic p and the order r are parameterized by
for an integer t.
The elliptic curve E has an equation of the form E: y^2 = x^3 + b, where b is a primitive element of the multiplicative group (GF(p))^* of order (p  1).
In the case of BN curves, we can use twists of the degree 6. If m is an element that is neither a square nor a cube in an extension field GF(p^2), the twist E' of E is defined over an extension field GF(p^2) by the equation E': y^2 = x^3 + b' with b' = b / m or b' = b * m.
BN curves are called Dtype if b' = b / m, and Mtype if b' = b * m.
The embedding degree k is 12.
A pairing e is defined by taking G_1 as a subgroup of E(GF(p)) of order r, G_2 as a subgroup of E'(GF(p^2)), and G_T as a subgroup of a multiplicative group (GF(p^12))^* of order r.
BarretoLynnScott Curves
A BLS curve is a another family of pairingfrinedly curves proposed in 2002. Similar to BN curves, a pairing over BLS curves constructs optimal Ate pairings.
A BLS curve is defined by elliptic curves E and E' parameterized by a wellchosen integer t.
E is defined over a finite field GF(p) by an equation of the form E: y^2 = x^3 + b,
and its twist E': y^2 = x^3 + b', is defined in the same way as BN curves.
In contrast to BN curves, E(GF(p)) does not have a prime order.
Instead, its order is divisible by a large parameterized prime r and denoted by h * r with cofactor h.
The pairing is defined on the rtorsion points.
In the same way as BN curves, BLS curves can be categorized as Dtype and Mtype.
BLS curves vary in accordance with different embedding degrees. In this memo, we deal with the BLS12 and BLS48 families with embedding degrees 12 and 48 with respect to r, respectively.
In BLS curves, parameters p and r are given by the following equations:
for a well chosen integer t where t must be 1 (mod 3).
A pairing e is defined by taking G_1 as a subgroup of E(GF(p)) of order r, G_2 as an order r subgroup of E'(GF(p^2)) for BLS12 and of E'(GF(p^8)) for BLS48, and G_T as an order r subgroup of a multiplicative group (GF(p^12))^* for BLS12 and of a multiplicative group (GF(p^48))^* for BLS48.
Representation Convention for an Extension Field
Pairingfriendly curves use a tower of some extension fields.
In order to encode an element of an extension field, focusing on interoperability, we adopt the representation convention shown in Appendix J.4 of as a standard and effective method. Note that the bigendian encoding is used for an element in GF(p) which follows to mcl , ISO/IEC 159465 and etc.
Let GF(p) be a finite field of characteristic p and GF(p^d) = GF(p)(i) be an extension field of GF(p) of degree d.
For an element s in GF(p^d) such that s = s_0 + s_1 * i + ... + s_{d  1} * i^{d  1} where s_0, s_1, ... , s_{d  1} in the basefield GF(p), s is represented as octet string by oct(s) = s_0  s_1  ...  s_{d  1}.
Let GF(p^d') = GF(p^d)(j) be an extension field of GF(p^d) of degree d' / d.
For an element s' in GF(p^d') such that s' = s'_0 + s'_1 * j + ... + s'_{d' / d  1} * j^{d' / d  1} where s'_0, s'_1, ..., s'_{d' / d  1} in the basefield GF(p^d), s' is represented as integer by oct(s') = oct(s'_0)  oct(s'_1)  ...  oct(s'_{d' / d  1}), where oct(s'_0), ... , oct(s'_{d' / d  1}) are octet strings encoded by above convention.
In general, one can define encoding between integer and an element of any finite field tower by inductively applying the above convention.
The parameters and test vectors of extension fields described in this memo are encoded by this convention and represented in an octet stream.
When applications communicate elements in an extension field, using the compression method may be more effective.
In that case, care for interoperability must be taken.
Security of PairingFriendly Curves
Evaluating the Security of PairingFriendly Curves
The security of pairingfriendly curves is evaluated by the hardness of the following discrete logarithm problems:
 The elliptic curve discrete logarithm problem (ECDLP) in G_1 and G_2
 The finite field discrete logarithm problem (FFDLP) in G_T
There are other hard problems over pairingfriendly curves used for proving the security of pairingbased cryptography. Such problems include the computational bilinear DiffieHellman (CBDH) problem, the bilinear DiffieHellman (BDH) problem, the decision bilinear DiffieHellman (DBDH) problem, the gap DBDH problem, etc. .
Almost all of these variants are reduced to the hardness of discrete logarithm problems described above and are believed to be easier than the discrete logarithm problems.
Although it would be sufficient to attack any of these problems to attack pairingbased crytography, the only known attacks thus far attack the discrete logarithm problem directly, so we focus on the discrete logarithm in this memo.
The security levels of pairingfriendly curves are estimated by the computational cost of the most efficient algorithm for solving the above discrete logarithm problems. The bestknown algorithms for solving the discrete logarithm problems are based on Pollard's rho algorithm and Index Calculus .
To make index calculus algorithms more efficient, number field sieve (NFS) algorithms are utilized.
Impact of Recent Attacks
In 2016, Kim and Barbulescu proposed a new variant of the NFS algorithms, the extended tower number field sieve (exTNFS), which drastically reduces the complexity of solving FFDLP .
The exTNFS improves the polynomial selection that is the first step in the number field sieve algorithm for discrete logarithms in GF(p^k).
The idea is applicable when the embedding degree k is a composite that satisfies k = i * j (gcd (i, j) = 1, i, j> 1).
Since the above condition is satisfied especially when k = 2^n*3^m (n, m> 1), BN curves and BLS curves whose embedding degree is divisible by 6 are affected by the exTNFS.
The basic idea of the exTNFS is based on the equality GF(p^k) = (GF(p^i)^j) and one of the improvement for reducing the amount of cost for solving FFDLP is using subfield calculation.
Please refer to for detailed ideas and calculation algorithms of exTNFS.
Due to exTNFS, the security levels of certain pairingfriendly curves asymptotically dropped down.
For instance, Barbulescu and Duquesne estimated that the security of the BN curves, which had been believed to provide 128bit security (BN256, for example) was reduced to approximately 100 bits . Here, the security levels described in this memo correspond to the security strength of NIST recommendation .
There has since been research into the minimum bit length of the parameters of pairingfriendly curves for each security level when applying exTNFS as an attacking method for FFDLP.
For 128bit security, Barbulescu and Duquesne estimated the minimum bit length of p of BN curves and BLS12 curves after exTNFS as 461 bits .
For 256bit security, Kiyomura et al. estimated the minimum bit length of p^k of BLS48 curves as 27,410 bits, which indicated 572 bits of p .
Selection of PairingFriendly Curves
In this section, we introduce some of the known secure pairingfriendly curves that consider the impact of exTNFS.
First, we show the adoption status of pairingfriendly curves in standards, libraries and applications, and classify them in accordance with the 128bit, 192bit, and 256bit security levels.
Then, from the viewpoints of "security" and "widely used", pairingfriendly curves corresponding to each security level are selected and their parameters are indicated.
In our selection policy, it is important that selected curves are shown in peerreviewed papers for security and that they are widely used in cryptographic libraries.
In addition, "efficiency" is one of the important aspects but greatly dependant on implementations, so we choose to prioritize "security" and "widely used" over "efficiency" in consideration of future interconnections and interoperability over the internet.
Adoption Status of Pairingfriendly Curves
We show the pairingfriendly curves that have been selected by existing standards, cryptographic libraries, and applications.
summarizes the adoption status of pairingfriendly curves. In this table, "Arnd" is an abbreviation for "Around". The curves categorized as 'Arnd 128bit', 'Arnd 192bit' and 'Arnd 256bit' for each label show that their security levels are within the range of plus/minus 5 bits for each security level. Other labels shown with '~' mean that the security level of the categorized curve is outside the range of each security level. Specifically, the security level of the categorized curves is more than the previous column and is less than the next column.
The details are described as the following subsections. A BN curve with a XXXbit characteristic p is denoted as BNXXX and a BLS curve of embedding degree k with a XXXbit p is denoted as BLSk_XXX.
omits parameters with security levels below the "Arnd 128bit" range due to space limitations and viewpoints of secure usage of parameters.
On the other hand, indicating which standards, libraries, and applications use these lower security level parameters would be useful information for implementers, therefore shows these parameters. In addition, the full version of is available at .
In , the security level for each curve is evaluated in accordance with ,, and . Note that the Freeman curves and MNT curves are not included in this table because does not show the security levels of these curves.
Adoption Status of PairingFriendly Curves
Category 
Name 
Curve Type 
Security Levels (bit) 
Arnd 128 
~ 
Arnd 192 
~ 
Arnd 256 
Standard 
ISO/IEC 
BN384 
X 




BN512I 

X 



TCG 
BN638 

X 



FIDO/W3C 
BN512I 

X 



BN638 

X 



Library 
mcl 
BLS12_381 
X 




BN382M 
X 




BN462 
X 




RELIC 
BLS12_381 
X 




BLS12_446 
X 




BLS12_455 
X 




BLS12_638 

X 



BLS24_477 


X 


BLS48_575 




X 
BN382R 
X 




BN446 
X 




BN638 

X 



CP8_544 
X 




K54_569 




X 
KSS18_508 

X 



OT8_511 
X 




AMCL 
BLS12_381 
X 




BLS12_383 
X 




BLS12_461 
X 




BLS24_479 


X 


BLS48_556 




X 
BN512I 

X 



Kyushu Univ. 
BLS48_581 




X 
MIRACL 
BLS12_381 
X 




BLS12_383 
X 




BLS12_461 
X 




BLS24_479 


X 


BLS48_556 




X 
BLS48_581 




X 
BN462 
X 




BN512I 

X 



Adjoint 
BLS12_381 
X 




BN462 
X 




bls12377js 
BLS12_377 
X 




Application 
Zcash 
BLS12_381 
X 




Ethereum 
BLS12_381 
X 




Chia Network 
BLS12_381 
X 




DFINITY 
BLS12_381 
X 




BN382M 
X 




BN462 
X 




Algorand 
BLS12_381 
X 




International Standards
ISO/IEC 15946 series specifies publickey cryptographic techniques based on elliptic curves. ISO/IEC 159465 shows numerical examples of MNT curves with 160bit p and 256bit p, Freeman curves with 224bit p and 256bit p, and BN curves with 160bit p, 192bit p, 224bit p, 256bit p, 384bit p, and 512bit p. These parameters do not take into account the effects of the exTNFS. On the other hand, the parameters may be revised in future versions since ISO/IEC 159465 is currently under development.
As described below, BN curves with 256bit p and 512bit p specified in ISO/IEC 159465 used by other standards and libraries, these curves are especially denoted as BN256I and BN512I. The suffix 'I' of BN256I and BN512I are given from the initials of the standard name ISO.
TCG adopts the BN256I and a BN curve with 638bit p specified by their own. FIDO Alliance and W3C adopt BN256I, BN512I, the BN638 by TCG, and the BN curve with 256bit p proposed by Devegili et al. (named BN256D). The suffix 'D' of BN256D is given from the initials of the first author's name of the paper which proposed the parameter.
Cryptographic Libraries
There are a lot of cryptographic libraries that support pairing calculations.
PBC is a library for pairingbased cryptography published by Stanford University that supports BN curves, MNT curves, Freeman curves, and supersingular curves . Users can generate pairing parameters by using PBC and use pairing operations with the generated parameters.
mcl is a library for pairingbased cryptography that supports four BN curves and BLS12_381 . These BN curves include BN254 proposed by Nogami et al. (named BN254N), BN_SNARK1 suitable for SNARK applications, BN382M, and BN462. The suffix 'N' of BN256N and the suffix 'M' of BN382M are respectively given from the initials of the first author's name of the proposed paper and the library's name mcl. Kyushu University published a library that supports the BLS48_581 . The University of Tsukuba Elliptic Curve and Pairing Library (TEPLA) supports two BN curves, BN254N and BN254 proposed by Beuchat et al. (named BN254B). The suffix 'B' of BN254B is given from the initials of the first author's name of the proposed paper. Intel published a cryptographic library named Intel Integrated Performance Primitives (IntelIPP) and the library supports BN256I.
RELIC uses various types of pairingfriendly curves including six BN curves (BN158, BN254R, BN256R, BN382R, BN446, and BN638), where BN254R, BN256R, and BN382R are RELIC specific parameters that are different from BN254N, BN254B, BN256I, BN256D, and BN382M. The suffix 'R' of BN382R is given from the initials of the library's name RELIC. In addition, RELIC supports six BLS curves (BLS12_381, BLS12_446, BLS12_445, BLS12_638, BLS24_477, and BLS48_575 ), CocksPinch curves of embedding degree 8 with 544bit p, pairingfriendly curves constructed by Scott et al. based on KachisaScottSchaefer curves with embedding degree 54 with 569bit p (named K54_569), a KSS curve of embedding degree 18 with 508bit p (named KSS18_508) , Optimal TNFSsecure curve of embedding degree 8 with 511bit p(OT8_511), and a supersingular curve with 1536bit p (SS_1536).
Apache Milagro Crypto Library (AMCL) supports four BLS curves (BLS12_381, BLS12_461, BLS24_479 and BLS48_556) and four BN curves (BN254N, BN254CX proposed by CertiVox, BN256I, and BN512I). In addition to AMCL's supported curves, MIRACL supports BN462 and BLS48_581.
Adjoint published a library that supports the BLS12_381 and six BN curves (BN_SNARK1, BN254B, BN254N, BN254S1, BN254S2, and BN462) , where BN254S1 and BN254S2 are BN curves adopted by an old version of AMCL . The suffix 'S' of BN254S1 and BN254S2 are given from the initials of developper's name because he proposed these parameters.
The Celo foundation published the bls12377js library . The supported curve is the BLS12_377 curve which is shown in .
Applications
Zcash uses a BN curve (named BN128) in their library libsnark .
In response to the exTNFS attacks, they proposed new parameters using BLS12_381 and published its experimental implementation .
Ethereum 2.0 adopted BLS12_381 and uses the implementation by Meyer . Chia Network published their implementation by integrating the RELIC toolkit . DFINITY uses mcl, and Algorand published an implementation which supports BLS12_381.
For 128bit Security
shows a lot of cases of adopting BN and BLS curves. Among them, BLS12_381 and BN462 match our selection policy.
Especially, the one that best matches the policy is BLS12_381 from the viewpoint of "widely used" and "efficiency", so we introduce the parameters of BLS12_381 in this memo.
On the other hand, from the viewpoint of the future use, the parameter of BN462 is also introduced.
As shown in recent security evaluations for BLS12_381 , its security level close to 128bit but it is less than 128bit.
If the attack is improved even a little, BLS12_381 will not be suitable for the curve of the 128bit security level.
As curves of 128bit security level are currently the most widely used, we recommend both BLS12381 and BN462 in this memo in order to have a more efficient and a more prudent option respectively.
BLS Curves for the 128bit security level
In this part, we introduce the parameters of the BarretoLynnScott curve of embedding degree 12 with 381bit p that is adopted by a lot of applications such as Zcash , Ethereum , and so on.
The BLS12_381 curve is shown in and it is defined by the parameter
where the size of p becomes 381bit length.
For the finite field GF(p), the towers of extension field GF(p^2), GF(p^6) and GF(p^12) are defined by indeterminates u, v, and w as follows:
Defined by t, the elliptic curve E and its twist E' are represented
by E: y^2 = x^3 + 4 and E': y^2 = x^3 + 4(u + 1). BLS12_381 is categorized as Mtype.
We have to note that the security level of this pairing is expected to be 126 rather than 128 bits .
Parameters of BLS12_381 are given as follows.

G_1 is the largest primeorder subgroup of E(GF(p))
 BP = (x,y) : a 'base point', i.e., a generator of G_1

G_2 is an rorder subgroup of E'(GF(p^2))

BP' = (x',y') : a 'base point', i.e., a generator of G_2 (encoded with )
 x' = x'_0 + x'_1 * u (x'_0, x'_1 in GF(p))
 y' = y'_0 + y'_1 * u (y'_0, y'_1 in GF(p))
 h' : the cofactor #E'(GF(p^2))/r
 p:

0x1a0111ea397fe69a4b1ba7b6434bacd764774b84f38512bf6730d2a0f6b0f6241eabfffeb153ffffb9feffffffffaaab
 r:

0x73eda753299d7d483339d80809a1d80553bda402fffe5bfeffffffff00000001
 x:

0x17f1d3a73197d7942695638c4fa9ac0fc3688c4f9774b905a14e3a3f171bac586c55e83ff97a1aeffb3af00adb22c6bb
 y:

0x08b3f481e3aaa0f1a09e30ed741d8ae4fcf5e095d5d00af600db18cb2c04b3edd03cc744a2888ae40caa232946c5e7e1
 h:

0x396c8c005555e1568c00aaab0000aaab
 b:

4
 x'_0:

0x024aa2b2f08f0a91260805272dc51051c6e47ad4fa403b02b4510b647ae3d1770bac0326a805bbefd48056c8c121bdb8
 x'_1:

0x13e02b6052719f607dacd3a088274f65596bd0d09920b61ab5da61bbdc7f5049334cf11213945d57e5ac7d055d042b7e
 y'_0:

0x0ce5d527727d6e118cc9cdc6da2e351aadfd9baa8cbdd3a76d429a695160d12c923ac9cc3baca289e193548608b82801
 y'_1:

0x0606c4a02ea734cc32acd2b02bc28b99cb3e287e85a763af267492ab572e99ab3f370d275cec1da1aaa9075ff05f79be
 h':

0x5d543a95414e7f1091d50792876a202cd91de4547085abaa68a205b2e5a7ddfa628f1cb4d9e82ef21537e293a6691ae1616ec6e786f0c70cf1c38e31c7238e5
 b':

4 * (u + 1)
As mentioned above, BLS12_381 is adopted in a lot of applications. Since it is expected that BLS12_381 will continue to be widely used more and more in the future, shows the serialization format of points on an elliptic curve as useful information. This serialization format is also adopted in .
In addition, many pairingbased cryptographic applications use a hashing to an elliptic curve procedure that outputs a rational point on an elliptic curve from an arbitrary input. A standard specification of ciphersuites for a hashing to an elliptic curve, including BLS12381, is under discussion in the IETF and it will be valuable information for implementers.
BN Curves for the 128bit security level
A BN curve with the 128bit security level is shown in , which we call BN462.
BN462 is defined by the parameter
for the definition in .
For the finite field GF(p), the towers of extension field GF(p^2), GF(p^6) and GF(p^12) are defined by indeterminates u, v, and w as follows:
Defined by t, the elliptic curve E and its twist E' are represented by E: y^2 = x^3 + 5 and E': y^2 = x^3  u + 2, respectively. The size of p becomes 462bit length. BN462 is categorized as Dtype.
We have to note that BN462 is significantly slower than BLS12_381, but has 134bit security level , so may be more resistant to future small improvements to the exTNFS attack.
We note also that CP8_544 is about 20% faster that BN462 , has 131bit security level, and that due to its construction will not be affected by future small improvements to the exTNFS attack. However, as this curve is not widely used (it is only implemented in one library), we instead chose BN462 for our 'safe' option.
We give the following parameters for BN462.

G_1 is the largest primeorder subgroup of E(GF(p))
 BP = (x,y) : a 'base point', i.e., a generator of G_1

G_2 is an rorder subgroup of E'(GF(p^2))

BP' = (x',y') : a 'base point', i.e., a generator of G_2 (encoded with )
 x' = x'_0 + x'_1 * u (x'_0, x'_1 in GF(p))
 y' = y'_0 + y'_1 * u (y'_0, y'_1 in GF(p))
 h' : the cofactor #E'(GF(p^2))/r
 p:

0x240480360120023ffffffffff6ff0cf6b7d9bfca0000000000d812908f41c8020ffffffffff6ff66fc6ff687f640000000002401b00840138013
 r:

0x240480360120023ffffffffff6ff0cf6b7d9bfca0000000000d812908ee1c201f7fffffffff6ff66fc7bf717f7c0000000002401b007e010800d
 x:

0x21a6d67ef250191fadba34a0a30160b9ac9264b6f95f63b3edbec3cf4b2e689db1bbb4e69a416a0b1e79239c0372e5cd70113c98d91f36b6980d
 y:

0x0118ea0460f7f7abb82b33676a7432a490eeda842cccfa7d788c659650426e6af77df11b8ae40eb80f475432c66600622ecaa8a5734d36fb03de
 h:

1
 b:

5
 x'_0:

0x0257ccc85b58dda0dfb38e3a8cbdc5482e0337e7c1cd96ed61c913820408208f9ad2699bad92e0032ae1f0aa6a8b48807695468e3d934ae1e4df
 x'_1:

0x1d2e4343e8599102af8edca849566ba3c98e2a354730cbed9176884058b18134dd86bae555b783718f50af8b59bf7e850e9b73108ba6aa8cd283
 y'_0:

0x0a0650439da22c1979517427a20809eca035634706e23c3fa7a6bb42fe810f1399a1f41c9ddae32e03695a140e7b11d7c3376e5b68df0db7154e
 y'_1:

0x073ef0cbd438cbe0172c8ae37306324d44d5e6b0c69ac57b393f1ab370fd725cc647692444a04ef87387aa68d53743493b9eba14cc552ca2a93a
 h':

0x240480360120023ffffffffff6ff0cf6b7d9bfca0000000000d812908fa1ce0227fffffffff6ff66fc63f5f7f4c0000000002401b008a0168019
 b':

u + 2
For 192bit Security
As shown in , there are only two candidates of pairingfriendly curves for the 192bit security level, BLS24_477 and BLS24_479. BLS24_477 has only one implementation and BLS24_479 is an experimental parameter that is not shown in any peerreviewed paper. Therefore, because neither match our selection policy, we do not show the parameters for 192bit security here.
For 256bit Security
As shown in , there are three candidates of pairingfriendly curves for 256bit security. According to our selection policy, we select BLS48_581, as it is the most widely adopted by cryptographic libraries.
The selected BLS48 curve is shown in and it is defined by the parameter
In this case, the size of p becomes 581bit.
For the finite field GF(p), the towers of extension field GF(p^2), GF(p^4), GF(p^8), GF(p^24) and GF(p^48) are defined by indeterminates u, v, w, z, and s as follows:
The elliptic curve E and its twist E' are represented by E: y^2 = x^3 + 1
and E': y^2 = x^3  1 / w. BLS48581 is categorized as Dtype.
We then give the parameters for BLS48581 as follows.

G_1 is the largest primeorder subgroup of E(GF(p))
 BP = (x,y) : a 'base point', i.e., a generator of G_1

G_2 is an rorder subgroup of E'(GF(p^8))

BP' = (x',y') : a 'base point', i.e., a generator of G_2 (encoded with )
 x' = x'_0 + x'_1 * u + x'_2 * v + x'_3 * u * v + x'_4 * w + x'_5 * u * w + x'_6 * v * w + x'_7 * u * v * w (x'_0, ..., x'_7 in GF(p))
 y' = y'_0 + y'_1 * u + y'_2 * v + y'_3 * u * v + y'_4 * w + y'_5 * u * w + y'_6 * v * w + y'_7 * u * v * w (y'_0, ..., y'_7 in GF(p))
 h' : the cofactor #E'(GF(p^8))/r
 p:

0x1280f73ff3476f313824e31d47012a0056e84f8d122131bb3be6c0f1f3975444a48ae43af6e082acd9cd30394f4736daf68367a5513170ee0a578fdf721a4a48ac3edc154e6565912b
 r:

0x2386f8a925e2885e233a9ccc1615c0d6c635387a3f0b3cbe003fad6bc972c2e6e741969d34c4c92016a85c7cd0562303c4ccbe599467c24da118a5fe6fcd671c01
 x:

0x02af59b7ac340f2baf2b73df1e93f860de3f257e0e86868cf61abdbaedffb9f7544550546a9df6f9645847665d859236ebdbc57db368b11786cb74da5d3a1e6d8c3bce8732315af640
 y:

0x0cefda44f6531f91f86b3a2d1fb398a488a553c9efeb8a52e991279dd41b720ef7bb7beffb98aee53e80f678584c3ef22f487f77c2876d1b2e35f37aef7b926b576dbb5de3e2587a70
 x'_0:

0x05d615d9a7871e4a38237fa45a2775debabbefc70344dbccb7de64db3a2ef156c46ff79baad1a8c42281a63ca0612f400503004d80491f510317b79766322154dec34fd0b4ace8bfab
 x'_1:

0x07c4973ece2258512069b0e86abc07e8b22bb6d980e1623e9526f6da12307f4e1c3943a00abfedf16214a76affa62504f0c3c7630d979630ffd75556a01afa143f1669b36676b47c57
 x'_2:

0x01fccc70198f1334e1b2ea1853ad83bc73a8a6ca9ae237ca7a6d6957ccbab5ab6860161c1dbd19242ffae766f0d2a6d55f028cbdfbb879d5fea8ef4cded6b3f0b46488156ca55a3e6a
 x'_3:

0x0be2218c25ceb6185c78d8012954d4bfe8f5985ac62f3e5821b7b92a393f8be0cc218a95f63e1c776e6ec143b1b279b9468c31c5257c200ca52310b8cb4e80bc3f09a7033cbb7feafe
 x'_4:

0x038b91c600b35913a3c598e4caa9dd63007c675d0b1642b5675ff0e7c5805386699981f9e48199d5ac10b2ef492ae589274fad55fc1889aa80c65b5f746c9d4cbb739c3a1c53f8cce5
 x'_5:

0x0c96c7797eb0738603f1311e4ecda088f7b8f35dcef0977a3d1a58677bb037418181df63835d28997eb57b40b9c0b15dd7595a9f177612f097fc7960910fce3370f2004d914a3c093a
 x'_6:

0x0b9b7951c6061ee3f0197a498908aee660dea41b39d13852b6db908ba2c0b7a449cef11f293b13ced0fd0caa5efcf3432aad1cbe4324c22d63334b5b0e205c3354e41607e60750e057
 x'_7:

0x0827d5c22fb2bdec5282624c4f4aaa2b1e5d7a9defaf47b5211cf741719728a7f9f8cfca93f29cff364a7190b7e2b0d4585479bd6aebf9fc44e56af2fc9e97c3f84e19da00fbc6ae34
 y'_0:

0x00eb53356c375b5dfa497216452f3024b918b4238059a577e6f3b39ebfc435faab0906235afa27748d90f7336d8ae5163c1599abf77eea6d659045012ab12c0ff323edd3fe4d2d7971
 y'_1:

0x0284dc75979e0ff144da6531815fcadc2b75a422ba325e6fba01d72964732fcbf3afb096b243b1f192c5c3d1892ab24e1dd212fa097d760e2e588b423525ffc7b111471db936cd5665
 y'_2:

0x0b36a201dd008523e421efb70367669ef2c2fc5030216d5b119d3a480d370514475f7d5c99d0e90411515536ca3295e5e2f0c1d35d51a652269cbc7c46fc3b8fde68332a526a2a8474
 y'_3:

0x0aec25a4621edc0688223fbbd478762b1c2cded3360dcee23dd8b0e710e122d2742c89b224333fa40dced2817742770ba10d67bda503ee5e578fb3d8b8a1e5337316213da92841589d
 y'_4:

0x0d209d5a223a9c46916503fa5a88325a2554dc541b43dd93b5a959805f1129857ed85c77fa238cdce8a1e2ca4e512b64f59f430135945d137b08857fdddfcf7a43f47831f982e50137
 y'_5:

0x07d0d03745736b7a513d339d5ad537b90421ad66eb16722b589d82e2055ab7504fa83420e8c270841f6824f47c180d139e3aafc198caa72b679da59ed8226cf3a594eedc58cf90bee4
 y'_6:

0x0896767811be65ea25c2d05dfdd17af8a006f364fc0841b064155f14e4c819a6df98f425ae3a2864f22c1fab8c74b2618b5bb40fa639f53dccc9e884017d9aa62b3d41faeafeb23986
 y'_7:

0x035e2524ff89029d393a5c07e84f981b5e068f1406be8e50c87549b6ef8eca9a9533a3f8e69c31e97e1ad0333ec719205417300d8c4ab33f748e5ac66e84069c55d667ffcb732718b6
 h:

0x85555841aaaec4ac
 b:

1
 h':

0x170e915cb0a6b7406b8d94042317f811d6bc3fc6e211ada42e58ccfcb3ac076a7e4499d700a0c23dc4b0c078f92def8c87b7fe63e1eea270db353a4ef4d38b5998ad8f0d042ea24c8f02be1c0c83992fe5d7725227bb27123a949e0876c0a8ce0a67326db0e955dcb791b867f31d6bfa62fbdd5f44a00504df04e186fae033f1eb43c1b1a08b6e086eff03c8fee9ebdd1e191a8a4b0466c90b389987de5637d5dd13dab33196bd2e5afa6cd19cf0fc3fc7db7ece1f3fac742626b1b02fcee04043b2ea96492f6afa51739597c54bb78aa6b0b99319fef9d09f768831018ee6564c68d054c62f2e0b4549426fec24ab26957a669dba2a2b6945ce40c9aec6afdeda16c79e15546cd7771fa544d5364236690ea06832679562a68731420ae52d0d35a90b8d10b688e31b6aee45f45b7a5083c71732105852decc888f64839a4de33b99521f0984a418d20fc7b0609530e454f0696fa2a8075ac01cc8ae3869e8d0fe1f3788ffac4c01aa2720e431da333c83d9663bfb1fb7a1a7b90528482c6be7892299030bb51a51dc7e91e9156874416bf4c26f1ea7ec578058563960ef92bbbb8632d3a1b695f954af10e9a78e40acffc13b06540aae9da5287fc4429485d44e6289d8c0d6a3eb2ece35012452751839fb48bc14b515478e2ff412d930ac20307561f3a5c998e6bcbfebd97effc6433033a2361bfcdc4fc74ad379a16c6dea49c209b1
 b':

1 / w
Security Considerations
The recommended pairingfriendly curves are selected by considering the exTNFS proposed by Kim et al. in 2016 and they are categorized in each security level in accordance with .
Implementers who will newly develop pairingbased cryptography applications SHOULD use the recommended parameters.
As of 2020, as far as we've investigated the top cryptographic conferences in the past, there are no fatal attacks that significantly reduce the security of pairingfriendly curves after exTNFS.
BLS curves of embedding degree 12 typically require a characteristic p of 461 bits or larger to achieve the 128bit security level .
Note that the security level of BLS12381, which is adopted by a lot of libraries and applications, is slightly below 128 bits because a 381bit characteristic is used .
BN254 is used in most of the existing implementations as shown in ( and ), however, BN curves that were estimated as the 128bit security level before exTNFS including BN254 ensure no more than the 100bit security level by the effect of exTNFS.
In addition, implementors should be aware of the following points when they implement pairingbased cryptographic applications using recommended curves. Regarding the use case and applications of pairingbased cryptographic applications, please refer .
In applications such as key agreement protocols, users exchange the elements in G_1 and G_2 as public keys. To check these elements are socalled subgroup secure , implementors should validate if the elements have the correct order r. Specifically, for public keys P in G_1 and Q in G_2, a receiver should calculate scalar multiplications [r]P and [r]Q, and check the results become points at infinity.
The pairingbased protocols, such as the BLS signatures, use a scalar multiplication in G_1, G_2 and an exponentiation in G_3 with the secret key. In order to prevent the leakage of secret key due to side channel attacks, implementors should apply countermeasure techniques such as montgomery ladder when they implement modules of a scalar multiplication and an exponentiation. Please refer and for the detailed algorithms of montgomery ladder.
When converting between an element in extension field and an octet string, implementors should check that the coefficient is within an appropriate range .
If the coefficient is out of range, there is a possible that security vulnerabilities such as the signature forgery may occur.
Recommended parameters are affected by the Cheon's attack which is a solving algorithm for the strong DH problem . The mathematical problem that provides the security of the strong DH problem is called ECDLP with Auxiliary Inputs (ECDLPwAI). In ECDLPwAI, given rational points P, [K]P, [K^i]P, for i=1,...,n, then we find a secret K. Since the complexity of ECDLPwAI is given as O(sqrt((r1)/n + sqrt(n)) where nr1 by using Cheon's algorithm whereas the complexity of ECDLP is given as O(sqrt(r)), the complexity of ECDLPwAI with the ideal value n becomes dramatically smaller than that of ECDLP. Please refer for the details of Cheon's algorithm. Therefore, implementers should be careful when they design cryptographic protocols based on the strong DH problem. For example, in the case of Short Signatures, they can prevent the Cheon's attack by carefully setting the maximum number of queries which corresponds to the parameter n.
IANA Considerations
This document has no actions for IANA.
Acknowledgements
The authors would like to appreciate a lot of authors including Akihiro Kato for their significant contribution to early versions of this memo.
The authors would also like to acknowledge Kim Taechan, Hoeteck Wee, Sergey Gorbunov, Michael Scott, Chloe Martindale as an Expert Reviewer, Watson Ladd, Armando Faz, Rene Struik, and Satoru Kanno for their valuable comments.
References
Normative References
Optimal Pairings
PairingFriendly Elliptic Curves of Prime Order
Constructing Elliptic Curves with Prescribed Embedding Degrees
Extended Tower Number Field Sieve: A New Complexity for the Medium Prime Case
Updating Key Size Estimations for Pairings
Secure and Efficient Pairing at 256Bit Security Level
Cocks–Pinch curves of embedding degrees five to eight and optimal ate pairing computation
NIST special publication 80057 part 1 (revised) : Recommendation for key management, part 1: General (revised)
Informative References
Handbook of Elliptic and Hyperelliptic Curve Cryptography
ZEXE: Enabling Decentralized Private Computation
bls12377js
The Celo Foundation
Security of the mission critical service (Release 15)
3GPP
ISO/IEC 117703:2015
ISO/IEC
A One Round Protocol for Tripartite DiffieHellman
Identitybased key agreement protocols from pairings
Ephemeral Key Leakage Resilient and Efficient IDAKEs That Can Share Identities, Private and Master Keys
MPin: A MultiFactor Zero Knowledge Authentication Protocol
Trusted Platform Module Library Specification, Family \"2.0\", Level 00, Revision 01.38
Trusted Computing Group (TCG)
FIDO ECDAA Algorithm  FIDO Alliance Review Draft 02
Web Authentication: An API for accessing Public Key Credentials Level 1  W3C Recommendation
Intel (R) SGX: Intel (R) EPID Provisioning and Attestation Services
Intel Corporation
Enhanced Privacy ID from Bilinear Pairing for Hardware Authentication and Attestation
What are zkSNARKs?
BLS12381
Electric Coin Company
Geo Key Manager: How It Works
Ethereum 2.0 Development Update #17  Prysmatic Labs
Efficient and Secure Digital Signatures for ProofofStake Blockchains
BLS signatures in C++, using the relic toolkit
Chia Network
DFINITY Technology Overview Series Consensus System Rev. 1
n.d.
IEEE Standard Specifications for PublicKey Cryptography
SEC 1: Elliptic Curve Cryptography
Standards for Efficient Cryptography Group (SECG)
Security Analysis of the Strong DiffieHellman Problem
Final Report on Main Computational Assumptions in Cryptography
ECRYPT
Monte Carlo methods for index computation $({\rm mod}\ p)$
Fast Computation of Discrete Logarithms in GF (q)
mcl  A portable and fast pairingbased cryptography library
BLS12381: New zkSNARK Elliptic Curve Construction
ISO/IEC 159465:2017
ISO/IEC
The MIRACL Core Cryptographic Library
MIRACL Ltd.
libsnark: a C++ library for zkSNARK proofs
SCIPR Lab
zkcrypto  Pairingfriendly elliptic curve library
zkcrypto
CIRCL: Cloudflare Interoperable, Reusable Cryptographic Library
Cloudflare
PBC Library  The PairingBased Cryptography Library
RELIC is an Efficient LIbrary for Cryptography
Pure GO bls library
TEPLA: University of Tsukuba Elliptic Curve and Pairing Library
University of Tsukuba
The Apache Milagro Cryptographic Library (AMCL)
The Apache Software Foundation
Developer Reference for Intel Integrated Performance Primitives Cryptography 2019
Intel Corporation
bls48  C++ library for Optimal Ate Pairing on BLS48
Kyushu University
Integer Variable XBased Ate Pairing
Implementing Cryptographic Pairings over BarretoNaehrig Curves
HighSpeed Software Implementation of the Optimal Ate Pairing over Barreto–Naehrig Curves
Cocks–Pinch curves of embedding degrees five to eight and optimal ate pairing computation
A New Family of PairingFriendly elliptic curves
Subgroup security in pairingbased cryptography
Speeding the Pollard and Elliptic Curve Methods of Factorization
Computing the Optimal Ate Pairing over Elliptic Curves with Embedding Degrees 54 and 48 at the 256bit security level
Constructing BrezingWeng PairingFriendly Elliptic Curves Using Elements in the Cyclotomic Field
Implementing Pairings at the 192Bit Security Level
Optimal TNFSsecure pairings on elliptic curves with composite embedding degree
TNFS Resistant Families of PairingFriendly Elliptic Curves
Faster Pairing Computations on Curves with HighDegree Twists
The arithmetic of elliptic curves
New explicit conditions of Elliptic Curve Traces under FR reduction
Constructing pairingfriendly elliptic curves with embedding degree 10
Optimised bilinear pairings over elliptic curves
Adjoint Inc.
Old version of the Apache Milagro Cryptographic Library
The Apache Software Foundation
Computing the Optimal Ate Pairing
Before presenting the computation of the optimal Ate pairing e(P, Q)
satisfying the properties shown in ,
we give the subfunctions used for the pairing computation.
The following algorithm, Line_Function shows the computation of the line function.
It takes A = (A[1], A[2]), B = (B[1], B[2]) in G_2, and P = ((P[1], P[2])) in G_1 as input, and outputs an element of G_T.
When implementing the line function, implementers should consider the isomorphism of E and its twist curve E' so that one can reduce the computational cost of operations in G_2 . We note that Line_function does not consider such an isomorphism.
The computation of the optimal Ate pairing for BN curves uses the Frobenius map.
The ppower Frobenius map pi for a point Q = (x, y) over E' is pi(p, Q) = (x^p, y^p).
Optimal Ate Pairings over BarretoNaehrig Curves
Let c = 6 * t + 2 for a parameter t and c_0, c_1, ... , c_L in {1,0,1} such that the sum of c_i * 2^i (i = 0, 1, ..., L) equals c.
The following algorithm shows the computation of the optimal Ate pairing on BN curves.
It takes P in G_1, Q in G_2, an integer c, c_0, ...,c_L in {1,0,1} such that the sum of c_i * 2^i (i = 0, 1, ..., L) equals c, and the order r of G_1 as input, and outputs e(P, Q).
Optimal Ate Pairings over BarretoLynnScott Curves
Let c = t for a parameter t and c_0, c_1, ... , c_L in {1,0,1} such that the sum of c_i * 2^i (i = 0, 1, ..., L) equals c.
The following algorithm shows the computation of optimal Ate pairing over BarretoLynnScott curves.
It takes P in G_1, Q in G_2, a parameter c, c_0, c_1, ..., c_L in {1,0,1} such that the sum of c_i * 2^i (i = 0, 1, ..., L),
and an order r as input, and outputs e(P, Q).
Test Vectors of Optimal Ate Pairing
We provide test vectors for Optimal Ate Pairing e(P, Q) given in for the curves BLS12381, BN462 and BLS48581 given in .
Here, the inputs P = (x, y) and Q = (x', y') are the corresponding base points BP and BP' given in .
For BLS12381 and BN462, Q = (x', y') is given by
where u is a indeterminate and x'_0, x'_1, y'_0, y'_1 are elements of GF(p).
For BLS48581, Q = (x', y') is given by
where u, v and w are indeterminates and x'_0, ..., x'_7 and y'_0, ..., y'_7 are elements of GF(p).
The representation of Q = (x', y') given below is followed by .
BLS12381:
 Input x value:

0x17f1d3a73197d7942695638c4fa9ac0fc3688c4f9774b905a14e3a3f171bac586c55e83ff97a1aeffb3af00adb22c6bb
 Input y value:

0x08b3f481e3aaa0f1a09e30ed741d8ae4fcf5e095d5d00af600db18cb2c04b3edd03cc744a2888ae40caa232946c5e7e1
 Input x'_0 value:

0x024aa2b2f08f0a91260805272dc51051c6e47ad4fa403b02b4510b647ae3d1770bac0326a805bbefd48056c8c121bdb8
 Input x'_1 value:

0x13e02b6052719f607dacd3a088274f65596bd0d09920b61ab5da61bbdc7f5049334cf11213945d57e5ac7d055d042b7e
 Input y'_0 value:

0x0ce5d527727d6e118cc9cdc6da2e351aadfd9baa8cbdd3a76d429a695160d12c923ac9cc3baca289e193548608b82801
 Input y'_1 value:

0x0606c4a02ea734cc32acd2b02bc28b99cb3e287e85a763af267492ab572e99ab3f370d275cec1da1aaa9075ff05f79be
 e_0:

0x11619b45f61edfe3b47a15fac19442526ff489dcda25e59121d9931438907dfd448299a87dde3a649bdba96e84d54558
 e_1:

0x153ce14a76a53e205ba8f275ef1137c56a566f638b52d34ba3bf3bf22f277d70f76316218c0dfd583a394b8448d2be7f
 e_2:

0x095668fb4a02fe930ed44767834c915b283b1c6ca98c047bd4c272e9ac3f3ba6ff0b05a93e59c71fba77bce995f04692
 e_3:

0x16deedaa683124fe7260085184d88f7d036b86f53bb5b7f1fc5e248814782065413e7d958d17960109ea006b2afdeb5f
 e_4:

0x09c92cf02f3cd3d2f9d34bc44eee0dd50314ed44ca5d30ce6a9ec0539be7a86b121edc61839ccc908c4bdde256cd6048
 e_5:

0x111061f398efc2a97ff825b04d21089e24fd8b93a47e41e60eae7e9b2a38d54fa4dedced0811c34ce528781ab9e929c7
 e_6:

0x01ecfcf31c86257ab00b4709c33f1c9c4e007659dd5ffc4a735192167ce197058cfb4c94225e7f1b6c26ad9ba68f63bc
 e_7:

0x08890726743a1f94a8193a166800b7787744a8ad8e2f9365db76863e894b7a11d83f90d873567e9d645ccf725b32d26f
 e_8:

0x0e61c752414ca5dfd258e9606bac08daec29b3e2c57062669556954fb227d3f1260eedf25446a086b0844bcd43646c10
 e_9:

0x0fe63f185f56dd29150fc498bbeea78969e7e783043620db33f75a05a0a2ce5c442beaff9da195ff15164c00ab66bdde
 e_10:

0x10900338a92ed0b47af211636f7cfdec717b7ee43900eee9b5fc24f0000c5874d4801372db478987691c566a8c474978
 e_11:

0x1454814f3085f0e6602247671bc408bbce2007201536818c901dbd4d2095dd86c1ec8b888e59611f60a301af7776be3d
BN462:
 Input x value:

0x21a6d67ef250191fadba34a0a30160b9ac9264b6f95f63b3edbec3cf4b2e689db1bbb4e69a416a0b1e79239c0372e5cd70113c98d91f36b6980d
 Input y value:

0x0118ea0460f7f7abb82b33676a7432a490eeda842cccfa7d788c659650426e6af77df11b8ae40eb80f475432c66600622ecaa8a5734d36fb03de
 Input x'_0 value:

0x0257ccc85b58dda0dfb38e3a8cbdc5482e0337e7c1cd96ed61c913820408208f9ad2699bad92e0032ae1f0aa6a8b48807695468e3d934ae1e4df
 Input x'_1 value:

0x1d2e4343e8599102af8edca849566ba3c98e2a354730cbed9176884058b18134dd86bae555b783718f50af8b59bf7e850e9b73108ba6aa8cd283
 Input y'_0 value:

0x0a0650439da22c1979517427a20809eca035634706e23c3fa7a6bb42fe810f1399a1f41c9ddae32e03695a140e7b11d7c3376e5b68df0db7154e
 Input y'_1 value:

0x073ef0cbd438cbe0172c8ae37306324d44d5e6b0c69ac57b393f1ab370fd725cc647692444a04ef87387aa68d53743493b9eba14cc552ca2a93a
 e_0:

0x0cf7f0f2e01610804272f4a7a24014ac085543d787c8f8bf07059f93f87ba7e2a4ac77835d4ff10e78669be39cd23cc3a659c093dbe3b9647e8c
 e_1:

0x00ef2c737515694ee5b85051e39970f24e27ca278847c7cfa709b0df408b830b3763b1b001f1194445b62d6c093fb6f77e43e369edefb1200389
 e_2:

0x04d685b29fd2b8faedacd36873f24a06158742bb2328740f93827934592d6f1723e0772bb9ccd3025f88dc457fc4f77dfef76104ff43cd430bf7
 e_3:

0x090067ef2892de0c48ee49cbe4ff1f835286c700c8d191574cb424019de11142b3c722cc5083a71912411c4a1f61c00d1e8f14f545348eb7462c
 e_4:

0x1437603b60dce235a090c43f5147d9c03bd63081c8bb1ffa7d8a2c31d673230860bb3dfe4ca85581f7459204ef755f63cba1fbd6a4436f10ba0e
 e_5:

0x13191b1110d13650bf8e76b356fe776eb9d7a03fe33f82e3fe5732071f305d201843238cc96fd0e892bc61701e1844faa8e33446f87c6e29e75f
 e_6:

0x07b1ce375c0191c786bb184cc9c08a6ae5a569dd7586f75d6d2de2b2f075787ee5082d44ca4b8009b3285ecae5fa521e23be76e6a08f17fa5cc8
 e_7:

0x05b64add5e49574b124a02d85f508c8d2d37993ae4c370a9cda89a100cdb5e1d441b57768dbc68429ffae243c0c57fe5ab0a3ee4c6f2d9d34714
 e_8:

0x0fd9a3271854a2b4542b42c55916e1faf7a8b87a7d10907179ac7073f6a1de044906ffaf4760d11c8f92df3e50251e39ce92c700a12e77d0adf3
 e_9:

0x17fa0c7fa60c9a6d4d8bb9897991efd087899edc776f33743db921a689720c82257ee3c788e8160c112f18e841a3dd9a79a6f8782f771d542ee5
 e_10:

0x0c901397a62bb185a8f9cf336e28cfb0f354e2313f99c538cdceedf8b8aa22c23b896201170fc915690f79f6ba75581f1b76055cd89b7182041c
 e_11:

0x20f27fde93cee94ca4bf9ded1b1378c1b0d80439eeb1d0c8daef30db0037104a5e32a2ccc94fa1860a95e39a93ba51187b45f4c2c50c16482322
BLS48581:
 Input x value:

0x02af59b7ac340f2baf2b73df1e93f860de3f257e0e86868cf61abdbaedffb9f7544550546a9df6f9645847665d859236ebdbc57db368b11786cb74da5d3a1e6d8c3bce8732315af640
 Input y value:

0x0cefda44f6531f91f86b3a2d1fb398a488a553c9efeb8a52e991279dd41b720ef7bb7beffb98aee53e80f678584c3ef22f487f77c2876d1b2e35f37aef7b926b576dbb5de3e2587a70
 x'_0:

0x05d615d9a7871e4a38237fa45a2775debabbefc70344dbccb7de64db3a2ef156c46ff79baad1a8c42281a63ca0612f400503004d80491f510317b79766322154dec34fd0b4ace8bfab
 x'_1:

0x07c4973ece2258512069b0e86abc07e8b22bb6d980e1623e9526f6da12307f4e1c3943a00abfedf16214a76affa62504f0c3c7630d979630ffd75556a01afa143f1669b36676b47c57
 x'_2:

0x01fccc70198f1334e1b2ea1853ad83bc73a8a6ca9ae237ca7a6d6957ccbab5ab6860161c1dbd19242ffae766f0d2a6d55f028cbdfbb879d5fea8ef4cded6b3f0b46488156ca55a3e6a
 x'_3:

0x0be2218c25ceb6185c78d8012954d4bfe8f5985ac62f3e5821b7b92a393f8be0cc218a95f63e1c776e6ec143b1b279b9468c31c5257c200ca52310b8cb4e80bc3f09a7033cbb7feafe
 x'_4:

0x038b91c600b35913a3c598e4caa9dd63007c675d0b1642b5675ff0e7c5805386699981f9e48199d5ac10b2ef492ae589274fad55fc1889aa80c65b5f746c9d4cbb739c3a1c53f8cce5
 x'_5:

0x0c96c7797eb0738603f1311e4ecda088f7b8f35dcef0977a3d1a58677bb037418181df63835d28997eb57b40b9c0b15dd7595a9f177612f097fc7960910fce3370f2004d914a3c093a
 x'_6:

0x0b9b7951c6061ee3f0197a498908aee660dea41b39d13852b6db908ba2c0b7a449cef11f293b13ced0fd0caa5efcf3432aad1cbe4324c22d63334b5b0e205c3354e41607e60750e057
 x'_7:

0x0827d5c22fb2bdec5282624c4f4aaa2b1e5d7a9defaf47b5211cf741719728a7f9f8cfca93f29cff364a7190b7e2b0d4585479bd6aebf9fc44e56af2fc9e97c3f84e19da00fbc6ae34
 y'_0:

0x00eb53356c375b5dfa497216452f3024b918b4238059a577e6f3b39ebfc435faab0906235afa27748d90f7336d8ae5163c1599abf77eea6d659045012ab12c0ff323edd3fe4d2d7971
 y'_1:

0x0284dc75979e0ff144da6531815fcadc2b75a422ba325e6fba01d72964732fcbf3afb096b243b1f192c5c3d1892ab24e1dd212fa097d760e2e588b423525ffc7b111471db936cd5665
 y'_2:

0x0b36a201dd008523e421efb70367669ef2c2fc5030216d5b119d3a480d370514475f7d5c99d0e90411515536ca3295e5e2f0c1d35d51a652269cbc7c46fc3b8fde68332a526a2a8474
 y'_3:

0x0aec25a4621edc0688223fbbd478762b1c2cded3360dcee23dd8b0e710e122d2742c89b224333fa40dced2817742770ba10d67bda503ee5e578fb3d8b8a1e5337316213da92841589d
 y'_4:

0x0d209d5a223a9c46916503fa5a88325a2554dc541b43dd93b5a959805f1129857ed85c77fa238cdce8a1e2ca4e512b64f59f430135945d137b08857fdddfcf7a43f47831f982e50137
 y'_5:

0x07d0d03745736b7a513d339d5ad537b90421ad66eb16722b589d82e2055ab7504fa83420e8c270841f6824f47c180d139e3aafc198caa72b679da59ed8226cf3a594eedc58cf90bee4
 y'_6:

0x0896767811be65ea25c2d05dfdd17af8a006f364fc0841b064155f14e4c819a6df98f425ae3a2864f22c1fab8c74b2618b5bb40fa639f53dccc9e884017d9aa62b3d41faeafeb23986
 y'_7:

0x035e2524ff89029d393a5c07e84f981b5e068f1406be8e50c87549b6ef8eca9a9533a3f8e69c31e97e1ad0333ec719205417300d8c4ab33f748e5ac66e84069c55d667ffcb732718b6
 e_0:

0x0e26c3fcb8ef67417814098de5111ffcccc1d003d15b367bad07cef2291a93d31db03e3f03376f3beae2bd877bcfc22a25dc51016eda1ab56ee3033bc4b4fec5962f02dffb3af5e38e
 e_1:

0x069061b8047279aa5c2d25cdf676ddf34eddbc8ec2ec0f03614886fa828e1fc066b26d35744c0c38271843aa4fb617b57fa9eb4bd256d17367914159fc18b10a1085cb626e5bedb145
 e_2:

0x02b9bece645fbf9d8f97025a1545359f6fe3ffab3cd57094f862f7fb9ca01c88705c26675bcc723878e943da6b56ce25d063381fcd2a292e0e7501fe572744184fb4ab4ca071a04281
 e_3:

0x0080d267bf036c1e61d7fc73905e8c630b97aa05ef3266c82e7a111072c0d2056baa8137fba111c9650dfb18cb1f43363041e202e3192fced29d2b0501c882543fb370a56bfdc2435b
 e_4:

0x03c6b4c12f338f9401e6a493a405b33e64389338db8c5e592a8dd79eac7720dd83dd6b0c189eeda20809160cd57cdf3e2edc82db15f553c1f6c953ea27114cb6bd8a38e273f407dae0
 e_5:

0x016e46224f28bfd8833f76ac29ee6e406a9da1bde55f5e82b3bd977897a9104f18b9ee41ea9af7d4183d895102950a12ce9975669db07924e1b432d9680f5ce7e5c67ed68f381eba45
 e_6:

0x008ddce7a4a1b94be5df3ceea56bef0077dcdde86d579938a50933a47296d337b7629934128e2457e24142b0eeaa978fd8e70986d7dd51fccbbeb8a1933434fec4f5bc538de2646e90
 e_7:

0x060ef6eae55728e40bd4628265218b24b38cdd434968c14bfefb87f0dcbfc76cc473ae2dc0cac6e69dfdf90951175178dc75b9cc08320fcde187aa58ea047a2ee00b1968650eec2791
 e_8:

0x0c3943636876fd4f9393414099a746f84b2633dfb7c36ba6512a0b48e66dcb2e409f1b9e150e36b0b4311165810a3c721525f0d43a021f090e6a27577b42c7a57bed3327edb98ba8f8
 e_9:

0x02d31eb8be0d923cac2a8eb6a07556c8951d849ec53c2848ee78c5eed40262eb21822527a8555b071f1cd080e049e5e7ebfe2541d5b42c1e414341694d6f16d287e4a8d28359c2d2f9
 e_10:

0x07f19673c5580d6a10d09a032397c5d425c3a99ff1dd0abe5bec40a0d47a6b8daabb22edb6b06dd8691950b8f23faefcdd80c45aa3817a840018965941f4247f9f97233a84f58b262e
 e_11:

0x0d3fe01f0c114915c3bdf8089377780076c1685302279fd9ab12d07477aac03b69291652e9f179baa0a99c38aa8851c1d25ffdb4ded2c8fe8b30338c14428607d6d822610d41f51372
 e_12:

0x0662eefd5fab9509aed968866b68cff3bc5d48ecc8ac6867c212a2d82cee5a689a3c9c67f1d611adac7268dc8b06471c0598f7016ca3d1c01649dda4b43531cffc4eb41e691e27f2eb
 e_13:

0x0aad8f4a8cfdca8de0985070304fe4f4d32f99b01d4ea50d9f7cd2abdc0aeea99311a36ec6ed18208642cef9e09b96795b27c42a5a744a7b01a617a91d9fb7623d636640d61a6596ec
 e_14:

0x0ffcf21d641fd9c6a641a749d80cab1bcad4b34ee97567d905ed9d5cfb74e9aef19674e2eb6ce3dfb706aa814d4a228db4fcd707e571259435393a27cac68b59a1b690ae8cde7a94c3
 e_15:

0x0cbe92a53151790cece4a86f91e9b31644a86fc4c954e5fa04e707beb69fc60a858fed8ebd53e4cfd51546d5c0732331071c358d721ee601bfd3847e0e904101c62822dd2e4c7f8e5c
 e_16:

0x0202db83b1ff33016679b6cfc8931deea6df1485c894dcd113bacf564411519a42026b5fda4e16262674dcb3f089cd7d552f8089a1fec93e3db6bca43788cdb06fc41baaa5c5098667
 e_17:

0x070a617ed131b857f5b74b625c4ef70cc567f619defb5f2ab67534a1a8aa72975fc4248ac8551ce02b68801703971a2cf1cb934c9c354cadd5cfc4575cde8dbde6122bd54826a9b3e9
 e_18:

0x070e1ebce457c141417f88423127b7a7321424f64119d5089d883cb953283ee4e1f2e01ffa7b903fe7a94af4bb1acb02ca6a36678e41506879069cee11c9dcf6a080b6a4a7c7f21dc9
 e_19:

0x058a06be5a36c6148d8a1287ee7f0e725453fa1bb05cf77239f235b417127e370cfa4f88e61a23ea16df3c45d29c203d04d09782b39e9b4037c0c4ac8e8653e7c533ad752a640b233e
 e_20:

0x0dfdfaaeb9349cf18d21b92ad68f8a7ecc509c35fcd4b8abeb93be7a204ac871f2195180206a2c340fccb69dbc30b9410ed0b122308a8fc75141f673ae5ec82b6a45fc2d664409c6b6
 e_21:

0x0d06c8adfdd81275da2a0ce375b8df9199f3d359e8cf50064a3dc10a592417124a3b705b05a7ffe78e20f935a08868ecf3fc5aba0ace7ce4497bb59085ca277c16b3d53dd7dae5c857
 e_22:

0x0708effd28c4ae21b6969cb9bdd0c27f8a3e341798b6f6d4baf27be259b4a47688b50cb68a69a917a4a1faf56cec93f69ac416512c32e9d5e69bd8836b6c2ba9c6889d507ad571dbc4
 e_23:

0x09da7c7aa48ce571f8ece74b98431b14ae6fb4a53ae979cd6b2e82320e8d25a0ece1ca1563aa5aa6926e7d608358af8399534f6b00788e95e37ef1b549f43a58ad250a71f0b2fdb2bf
 e_24:

0x0a7150a14471994833d89f41daeaa999dfc24a9968d4e33d88ed9e9f07aa2432c53e486ba6e3b6e4f4b8d9c989010a375935c06e4b8d6c31239fad6a61e2647b84a0e3f76e57005ff7
 e_25:

0x084696f31ff27889d4dccdc4967964a5387a5ae071ad391c5723c9034f16c2557915ada07ec68f18672b5b2107f785c15ddf9697046dc633b5a23cc0e442d28ef6eea9915d0638d4d8
 e_26:

0x0398e76e3d2202f999ac0f73e0099fe4e0fe2de9d223e78fc65c56e209cdf48f0d1ad8f6093e924ce5f0c93437c11212b7841de26f9067065b1898f48006bcc6f2ab8fa8e0b93f4ba4
 e_27:

0x06d683f556022368e7a633dc6fe319fd1d4fc0e07acff7c4d4177e83a911e73313e0ed980cd9197bd17ac45942a65d90e6cb9209ede7f36c10e009c9d337ee97c4068db40e34d0e361
 e_28:

0x0d764075344b70818f91b13ee445fd8c1587d1c0664002180bbac9a396ad4a8dc1e695b0c4267df4a09081c1e5c256c53fd49a73ffc817e65217a44fc0b20ef5ee92b28d4bc3e38576
 e_29:

0x0aa6a32fdc4423b1c6d43e5104159bcd8e03a676d055d4496f7b1bc8761164a2908a3ff0e4c4d1f4362015c14824927011e2909531b8d87ee0acd676e7221a1ca1c21a33e2cf87dc51
 e_30:

0x1147719959ac8eeab3fc913539784f1f947df47066b6c0c1beafecdb5fa784c3be9de5ab282a678a2a0cbef8714141a6c8aaa76500819a896b46af20509953495e2a85eff58348b38d
 e_31:

0x11a377bcebd3c12702bb34044f06f8870ca712fb5caa6d30c48ace96898fcbcddbcf31f331c9e524684c02c90db7f30b9fc470d6e651a7e8b1f684383f3705d7a47a1b4fe463d623c8
 e_32:

0x0b8b4511f451ba2cc58dc28e56d5e1d0a8f557ecb242f4d994a627e07cf3fa44e6d83cb907deacf303d2f761810b5d943b46c4383e1435ec23fec196a70e33946173c78be3c75dfc83
 e_33:

0x090962d632ee2a57ce4208052ce47a9f76ea0fdad724b7256bb07f3944e9639a981d3431087241e30ae9bf5e2ea32af323ce7ed195d383b749cb25bc09f678d385a49a0c09f6d9efca
 e_34:

0x0931c7befc80acd185491c68af886fa8ee39c21ed3ebd743b9168ae3b298df485bfdc75b94f0b21aecd8dca941dfc6d1566cc70dc648e6ccc73e4cbf2a1ac83c8294d447c66e74784d
 e_35:

0x020ac007bf6c76ec827d53647058aca48896916269c6a2016b8c06f0130901c8975779f1672e581e2dfdbcf504e96ecf6801d0d39aad35cf79fbe7fe193c6c882c15bce593223f0c7c
 e_36:

0x0c0aed0d890c3b0b673bf4981398dcbf0d15d36af6347a39599f3a22584184828f78f91bbbbd08124a97672963ec313ff142c456ec1a2fc3909fd4429fd699d827d48777d3b0e0e699
 e_37:

0x0ef7799241a1ba6baaa8740d5667a1ace50fb8e63accc3bc30dc07b11d78dc545b68910c027489a0d842d1ba3ac406197881361a18b9fe337ff22d730fa44afabb9f801f759086c8e4
 e_38:

0x016663c940d062f4057257c8f4fb9b35e82541717a34582dd7d55b41ebadf40d486ed74570043b2a3c4de29859fdeae9b6b456cb33bb401ecf38f9685646692300517e9b035d6665fc
 e_39:

0x1184a79510edf25e3bd2dc793a5082fa0fed0d559fa14a5ce9ffca4c61f17196e1ffbb84326272e0d079368e9a735be1d05ec80c20dc6198b50a22a765defdc151d437335f1309aced
 e_40:

0x120e47a747d942a593d202707c936dafa6fed489967dd94e48f317fd3c881b1041e3b6bbf9e8031d44e39c1ab5ae41e487eac9acd90e869129c38a8e6c97cf55d6666d22299951f91a
 e_41:

0x026b6e374108ecb2fe8d557087f40ab7bac8c5af0644a655271765d57ad71742aa331326d871610a8c4c30ccf5d8adbeec23cdff20d9502a5005fce2593caf0682c82e4873b89d6d71
 e_42:

0x041be63a2fa643e5a66faeb099a3440105c18dca58d51f74b3bf281da4e689b13f365273a2ed397e7b1c26bdd4daade710c30350318b0ae9a9b16882c29fe31ca3b884c92916d6d07a
 e_43:

0x124018a12f0f0af881e6765e9e81071acc56ebcddadcd107750bd8697440cc16f190a3595633bb8900e6829823866c5769f03a306f979a3e039e620d6d2f576793d36d840b168eeedd
 e_44:

0x0d422de4a83449c535b4b9ece586754c941548f15d50ada6740865be9c0b066788b6078727c7dee299acc15cbdcc7d51cdc5b17757c07d9a9146b01d2fdc7b8c562002da0f9084bde5
 e_45:

0x1119f6c5468bce2ec2b450858dc073fea4fb05b6e83dd20c55c9cf694cbcc57fc0effb1d33b9b5587852d0961c40ff114b7493361e4cfdff16e85fbce667869b6f7e9eb804bcec46db
 e_46:

0x061eaa8e9b0085364a61ea4f69c3516b6bf9f79f8c79d053e646ea637215cf6590203b275290872e3d7b258102dd0c0a4a310af3958165f2078ff9dc3ac9e995ce5413268d80974784
 e_47:

0x0add8d58e9ec0c9393eb8c4bc0b08174a6b421e15040ef558da58d241e5f906ad6ca2aa5de361421708a6b8ff6736efbac6b4688bf752259b4650595aa395c40d00f4417f180779985
ZCash serialization format for BLS12381
This section describes the serialization format defined by .
This format applies to points on the BLS12381 elliptic curves E and E',
whose parameters are given in .
Note that this serialization method is based on the representation shown in and it is a tiny tweak so as to apply to GF(p^m). It is not officially standardized by the standards organization, however we show it in this appendix as a useful reference for implementers.
At a high level, the serialization format is defined as follows:
 Serialized points include three metadata bits that indicate
whether a point is compressed or not, whether a point is the point at
infinity or not, and (for compressed points) the sign of the point's
ycoordinate.
 Points on E are serialized into 48 bytes (compressed) or 96 bytes (uncompressed). Points on E' are serialized into 96 bytes (compressed) or 192 bytes (uncompressed).
 The serialization of a point at infinity comprises a string of zero bytes, except that the metadata bits may be nonzero.
 The serialization of a compressed point other than the point at infinity comprises a serialized xcoordinate.
 The serialization of an uncompressed point other than the point at infinity comprises a serialized xcoordinate followed by a serialized ycoordinate.
Below, we give detailed serialization and deserialization procedures.
The following notation is used in the rest of this section:
 Elements of GF(p^2) are represented as polynomial with GF(p) coefficients like .
 For a byte string str, str[0] is defined as the first byte of str.
 The function sign_GF_p(y) returns one bit representing the sign of an
element of GF(p). This function is defined as follows:
(p  1) / 2, else
{ 0 otherwise.
]]>
 The function sign_GF_p^2(y') returns one bit representing the sign of an element in GF(p^2). This function is defined as follows:
(p  1) / 2, else
{ 0 otherwise.
]]>
Point Serialization Procedure
The serialization procedure is defined as follows for a point P = (x, y).
This procedure uses the I2OSP function defined in .

Compute the metadata bits C_bit, I_bit, and S_bit, as follows:

C_bit is 1 if point compression should be used, otherwise it is 0.

I_bit is 1 if P is the point at infinity, otherwise it is 0.

S_bit is 0 if P is the point at infinity or if point compression is not used.
Otherwise (i.e., when point compression is used and P is not the point at infinity), if P is a point on E, S_bit = sign_GF_p(y), else if P is a point on E', S_bit = sign_GF_p^2(y).

Let m_byte = (C_bit * 2^7) + (I_bit * 2^6) + (S_bit * 2^5).

Let x_string be the serialization of x, which is defined as follows:

If P is the point at infinity on E, let x_string = I2OSP(0, 48).

If P is a point on E other than the point at infinity, then x is an
element of GF(p), i.e., an integer in the inclusive range [0, p  1].
In this case, let x_string = I2OSP(x, 48).

If P is the point at infinity on E', let x_string = I2OSP(0, 96).

If P is a point on E' other than the point at infinity, then x can be
represented as (x_0, x_1) where x_0 and x_1 are elements of GF(p),
i.e., integers in the inclusive range [0, p  1] (see discussion of
vector representations above).
In this case, let x_string = I2OSP(x_1, 48)  I2OSP(x_0, 48).
Notice that in all of the above cases, the 3 most significant bits of
x_string[0] are guaranteed to be 0.

If point compression is used, let y_string be the empty string.
Otherwise (i.e., when point compression is not used), let y_string
be the serialization of y, which is defined in Step 3.

Let s_string = x_string  y_string.

Set s_string[0] = x_string[0] OR m_byte, where OR is computed bitwise.
After this operation, the most significant bit of s_string[0] equals
C_bit, the next bit equals I_bit, and the next equals S_bit.
(This is true because the three most significant bits of x_string[0]
are guaranteed to be zero, as discussed above.)

Output s_string.
Point deserialization procedure
The deserialization procedure is defined as follows for a string s_string. This procedure uses the OS2IP function defined in .

Let m_byte = s_string[0] AND 0xE0, where AND is computed bitwise. In other words, the three most significant bits of m_byte equal the three most significant bits of s_string[0], and the remaining bits are 0.
If m_byte equals any of 0x20, 0x60, or 0xE0, output INVALID and stop decoding.
Otherwise:
 Let C_bit equal the most significant bit of m_byte,

Let I_bit equal the second most significant bit of m_byte, and

Let S_bit equal the third most significant bit of m_byte.

If C_bit is 1:

If s_string has length 48 bytes, the output point is on the curve E.

If s_string has length 96 bytes, the output point is on the curve E'.

If s_string has any other length, output INVALID and stop decoding.
If C_bit is 0:

If s_string has length 96 bytes, the output point is on E.

If s_string has length 192 bytes, the output point is on E'.

If s_string has any other length, output INVALID and stop decoding.

Let s_string[0] = s_string[0] AND 0x1F, where AND is computed bitwise.
In other words, set the three most significant bits of s_string[0] to 0.

If I_bit is 1:

If s_string is not the all zeros string, output INVALID and stop decoding.

Otherwise (i.e., if s_string is the all zeros string), output the point
at infinity on the curve that was determined in step 2 and stop decoding.
Otherwise, I_bit must be 0. Continue decoding.

If C_bit is 0:

Let x_string be the first half of s_string.

Let y_string be the last half of s_string.

Let x = OS2IP(x_string).

Let y = OS2IP(y_string).

If the point P = (x, y) is not a valid point on the curve that was determined
in step 2, output INVALID and stop decoding.

Otherwise, output the point P = (x, y) and stop decoding.
Otherwise, C_bit must be 1. Continue decoding.

Let x = OS2IP(s_string).

If the curve that was determined in step 2 is E:

Let y2 = x^3 + 4 in GF(p).

If y2 is not square in GF(p), output INVALID and stop decoding.

Otherwise, let y = sqrt(y2) in GF(p) and let Y_bit = sign_GF_p(y).
Otherwise, (i.e., when the curve that was determined in step 2 is E'):

Let y2 = x^3 + 4 * (u + 1) in GF(p^2).

If y2 is not square in GF(p^2), output INVALID and stop decoding.

Otherwise, let y = sqrt(y2) in GF(p^2) and let Y_bit = sign_GF_p^2(y).

If S_bit equals Y_bit, output P = (x, y) and stop decoding.
Otherwise, output P = (x, y) and stop decoding.
Adoption Status of PairingFriendly Curves with the 100bit Security Level
BN curves including BN254 that were estimated as the 128bit security level before exTNFS ensure no more than the 100bit security level by the effect of exTNFS. summarizes the adoption status of the parameters with a security level lower than the "Arnd 128bit" range. Please refer the for the naming conventions for each curve listed in .
Adoption Status of PairingFriendly Curves with 100bit Security Level(Legacy)
Category 
Name 
Supported 100bit Curves 
Standard 
ISO/IEC 
BN256I 
TCG 
BN256I 
FIDO/W3C 
BN256I 
BN256D 
Library 
mcl 
BN254N 
BN_SNARK1 
TEPLA 
BN254B 
BN254N 
RELIC 
BN254N 
BN256D 
AMCL 
BN254N 
BN254CX 
BN256I 
Intel IPP 
BN256I 
MIRACL 
BN254N 
BN254CX 
BN256I 
Adjoint 
BN_SNARK1 
BN254B 
BN254N 
BN254S1 
BN254S2 
Application 
Zcash 
BN_SNARK1 
DFINITY 
BN254N 
BN_SNARK1 