< draft-aguado-opsawg-l3sm-l3nm-00.txt   draft-aguado-opsawg-l3sm-l3nm-01.txt >
Internet Engineering Task Force A. Aguado Internet Engineering Task Force A. Aguado
Internet-Draft O. Gonzalez de Dios, Ed. Internet-Draft O. Gonzalez de Dios, Ed.
Intended status: Standards Track V. Lopez Intended status: Standards Track V. Lopez
Expires: November 22, 2019 Telefonica Expires: January 9, 2020 Telefonica
D. Voyer D. Voyer
Bell Canada Bell Canada
L. Munoz L. Munoz
Vodafone Vodafone
May 21, 2019 July 8, 2019
Layer 3 VPN Network Model Layer 3 VPN Network Model
draft-aguado-opsawg-l3sm-l3nm-00 draft-aguado-opsawg-l3sm-l3nm-01
Abstract Abstract
RFC 8299 [RFC8299] defines a L3VPN Service Model (L3SM) YANG data RFC 8299 [RFC8299] defines a L3VPN Service Model (L3SM) YANG data
model that can be used for communication between customers and model that can be used for communication between customers and
network operators. It assumes that there is a monolithic management network operators. It assumes that there is a monolithic management
system with full control of transport resources. This approach (that system with full control of transport resources. This approach (that
is valid for the customer to network operator conversation) limits is valid for the customer to network operator conversation) limits
the usage of the model to the role of a Customer Service Model, the usage of the model to the role of a Customer Service Model,
according to the terminology defined in RFC 8309 [RFC8309]. according to the terminology defined in RFC 8309 [RFC8309].
skipping to change at page 2, line 10 skipping to change at page 2, line 10
Internet-Drafts are working documents of the Internet Engineering Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet- working documents as Internet-Drafts. The list of current Internet-
Drafts is at https://datatracker.ietf.org/drafts/current/. Drafts is at https://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress." material or to cite them other than as "work in progress."
This Internet-Draft will expire on November 22, 2019. This Internet-Draft will expire on January 9, 2020.
Copyright Notice Copyright Notice
Copyright (c) 2019 IETF Trust and the persons identified as the Copyright (c) 2019 IETF Trust and the persons identified as the
document authors. All rights reserved. document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents Provisions Relating to IETF Documents
(https://trustee.ietf.org/license-info) in effect on the date of (https://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License. described in the Simplified BSD License.
Table of Contents Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 2 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 3
1.1. Terminology . . . . . . . . . . . . . . . . . . . . . . . 3 1.1. Terminology . . . . . . . . . . . . . . . . . . . . . . . 3
1.2. Requirements Language . . . . . . . . . . . . . . . . . . 3 1.2. Requirements Language . . . . . . . . . . . . . . . . . . 3
2. Reference architecture . . . . . . . . . . . . . . . . . . . 4 2. Reference architecture . . . . . . . . . . . . . . . . . . . 4
3. Yang model extensions . . . . . . . . . . . . . . . . . . . . 7 3. Yang model explanation . . . . . . . . . . . . . . . . . . . 7
3.1. Bearer ethernet Encapsulation . . . . . . . . . . . . . . 8 3.1. Structure of the model . . . . . . . . . . . . . . . . . 8
3.2. Multi-Domain Resource Management . . . . . . . . . . . . 8 3.2. sites and bearers . . . . . . . . . . . . . . . . . . . . 8
3.3. Remote Far-End Configuration . . . . . . . . . . . . . . 8 3.3. Bearer ethernet Encapsulation . . . . . . . . . . . . . . 8
3.4. Provide Edge Identification Point . . . . . . . . . . . . 9 3.4. Multi-Domain Resource Management . . . . . . . . . . . . 8
4. Design of the data model . . . . . . . . . . . . . . . . . . 9 3.5. Remote Far-End Configuration . . . . . . . . . . . . . . 9
5. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . 12 3.6. Provide Edge Identification Point . . . . . . . . . . . . 9
6. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 12 4. Design of the data model . . . . . . . . . . . . . . . . . . 10
7. Security Considerations . . . . . . . . . . . . . . . . . . . 12 5. Yang module . . . . . . . . . . . . . . . . . . . . . . . . . 20
8. References . . . . . . . . . . . . . . . . . . . . . . . . . 12 6. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 96
8.1. Normative References . . . . . . . . . . . . . . . . . . 12 7. Security Considerations . . . . . . . . . . . . . . . . . . . 96
8.2. Informative References . . . . . . . . . . . . . . . . . 12 8. Implementation Status . . . . . . . . . . . . . . . . . . . . 96
Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 13 9. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . 97
10. Contributors . . . . . . . . . . . . . . . . . . . . . . . . 97
11. References . . . . . . . . . . . . . . . . . . . . . . . . . 97
11.1. Normative References . . . . . . . . . . . . . . . . . . 97
11.2. Informative References . . . . . . . . . . . . . . . . . 97
Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 98
1. Introduction 1. Introduction
RFC 8299 [RFC8299] defines a L3VPN Service Model (L3SM) YANG data RFC 8299 [RFC8299] defines a L3VPN Service Model (L3SM) YANG data
model that can be used for communication between customers and model that can be used for communication between customers and
network operators. Although the intention to provide an abstracted network operators. Although the intention to provide an abstracted
view of the customer's requested services is clear, the assumption is view of the customer's requested services is clear, the assumption is
that the model is applied at the top of a monolithic management that the model is applied at the top of a monolithic management
system with full control of transport resources. That assumption system with full control of transport resources. That assumption
substantially limits the usage of the L3SM to the role of a Customer substantially limits the usage of the L3SM to the role of a Customer
Service Model, according to the terminology defined in RFC 8309 Service Model, according to the terminology defined in RFC 8309
[RFC8309]. [RFC8309].
This document defines a set of extensions of the YANG model described The yang data model defined in this document is called the L3VPN
in RFC 8299 [RFC8299] via augmentation. The augmentations facilitate Network Model (L3NM). It enables further capabilities, such as
the use the resulting model in communications with the transport resource management or to serve as a multi-domain orchestration
orchestrator, also known as the MDSC (Multi-Domain Service interface, where transport resources must be synchronized. The
Coordinator) in the terminology of the framework for Abstraction and proposed yang module has been built with a Prune and extend approach,
Control of TE Networks (ACTN) defined in RFC 8453 [RFC8453]. The taking as a starting points the YANG model described in RFC 8299
MDSC is functional component responsible for orchestration of the [RFC8299].
network resources and instigate connections across the operator's
networks.
The data model defined in this document is called the L3VPN Network
Model (L3NM). It enables further capabilities, such as resource
management or to serve as a multi-domain orchestration interface,
where transport resources must be synchronized.
This document does not obsolete, but complements, the definitions in This document does not obsolete, but complements, the definitions in
RFC 8299 [RFC8299]. It aims to provide a wider scope for the L3SM RFC 8299 [RFC8299]. It aims to provide a different scope for the
via augmentation, but does not attempt to address all deployment L3SM, but does not attempt to address all deployment cases especially
cases especially those where the L3VPN connectivity is supported those where the L3VPN connectivity is supported through the
through the coordination of different VPNs in different underlying coordination of different VPNs in different underlying networks.
networks. More complex deployment scenarios involving the More complex deployment scenarios involving the coordination of
coordination of different VPN instances and different technologies to different VPN instances and different technologies to provide end-to-
provide end-to-end VPN connectivity is out of scope of this document, end VPN connectivity is out of scope of this document, but is
but is discussed in [I-D.evenwu-opsawg-yang-composed-vpn]. discussed in [I-D.evenwu-opsawg-yang-composed-vpn].
1.1. Terminology 1.1. Terminology
This document assumes that the reader is familiar with the contents This document assumes that the reader is familiar with the contents
of RFC 6241 [RFC6241], RFC 7950 [RFC7950], RFC 8299 [RFC8299], of RFC 6241 [RFC6241], RFC 7950 [RFC7950], RFC 8299 [RFC8299],
RFC 8309 [RFC8309], and [RFC8453] and uses terminology from those RFC 8309 [RFC8309], and [RFC8453] and uses terminology from those
documents. Tree diagrams used in this document follow the notation documents. Tree diagrams used in this document follow the notation
defined in [RFC8340]. defined in [RFC8340].
1.2. Requirements Language 1.2. Requirements Language
skipping to change at page 7, line 47 skipping to change at page 7, line 47
------------:------- ---------:------------ ------------:------- ---------:------------
: : : :
: Device Configuration : : Device Configuration :
: : : :
-------- -------- -------- --------
| Device | | Device | | Device | | Device |
-------- -------- -------- --------
Figure 2: L3SM and L3NM in the Context of ACTN Figure 2: L3SM and L3NM in the Context of ACTN
3. Yang model extensions 3. Yang model explanation
The scenarios covered include: the integration of ethernet and The scenarios covered include: the integration of ethernet and
encapsulation parameters, the extension for transport resources (e.g. encapsulation parameters, the extension for transport resources (e.g.
RTs and RDs) to be orchestrated from the management system, far-end RTs and RDs) to be orchestrated from the management system, far-end
configuration of PEs not managed by the management system and the configuration of PEs not managed by the management system and the
definition for PE identification. definition for PE identification.
3.1. Bearer ethernet Encapsulation 3.1. Structure of the model
The YANG module is divided into three main containers: "vpn-
services","sites" and "vpn-profiles".
3.2. sites and bearers
A site, as per RFC 8299 [RFC8299], represents a connection of a
customer office to one or more VPN services. As this Yang module is
the network view, each site is associated with a list of bearers. A
bearer is the layer two connection with the site. In the module it
is asumened that the bearer has been allocated by the Service
Provider (e.g. by the service orchestrator). The bearer is
associated to a network element and a port. Hence, a bearer is not
just a bearer-reference, but also a true reference to given port in
the service provider network.
3.3. Bearer ethernet Encapsulation
The definition of a L3 VPN is commonly defined not only at the IP The definition of a L3 VPN is commonly defined not only at the IP
layer, but also requires to identify parameters at the Ethernet layer, but also requires to identify parameters at the Ethernet
layer, such as encapsulation (e.g. VLAN, QinQ, QinAny, VxLAN, etc). layer, such as encapsulation (e.g. VLAN, QinQ, QinAny, VxLAN, etc).
This specification is not supported in [RFC8299], whilst it suggests This specification is not supported in [RFC8299], whilst it suggests
that any extension on this direction shall be implemented via that any extension on this direction shall be implemented via
augmentation of the bearer container. The extension defined to cope augmentation of the bearer container. The extension defined to cope
with these parameters uses the connection container inside the site- with these parameters uses the connection container inside the site-
network-access defined by the the [RFC8466]. This container defines network-access defined by the the [RFC8466]. This container defines
protocol parameters to enable connectivity at Layer 2. In the protocol parameters to enable connectivity at Layer 2. In the
context of L3SM, the augmentation includes only mandatory parameters context of L3SM, the augmentation includes only mandatory parameters
for the service configuration, which are mainly related to the for the service configuration, which are mainly related to the
interface encapsulation. Other definitions from L2SM connection interface encapsulation. Other definitions from L2SM connection
container are left aside. For example, LAG information is not container are left aside. For example, LAG information is not
required and it shall be configured prior to the service required and it shall be configured prior to the service
configuration, being the aggregated interface identified in the model configuration, being the aggregated interface identified in the model
as the bearer-reference, as discussed later in Section 4.4. as the bearer-reference, as discussed later in Section 4.4.
3.2. Multi-Domain Resource Management 3.4. Multi-Domain Resource Management
The implementation of L3 VPN services which spans across The implementation of L3 VPN services which spans across
administratively separated domains (i.e. that under the administratively separated domains (i.e. that under the
administration of different management systems or controllers) administration of different management systems or controllers)
requires some network resources to be synchronised between systems. requires some network resources to be synchronised between systems.
Particularly, there are two resources that must be orchestrated and Particularly, there are two resources that must be orchestrated and
synchronised to avoid asymmetric (non-functional) configuration, or synchronised to avoid asymmetric (non-functional) configuration, or
the usage of unavailable resources. For example, RTs shall be the usage of unavailable resources. For example, RTs shall be
synchronised between PEs. When every PE is controlled by the same synchronised between PEs. When every PE is controlled by the same
management system, RT allocation can be performed by the system. In management system, RT allocation can be performed by the system. In
cases where the service spans across multiple management systems, cases where the service spans across multiple management systems,
this task shall be synchronised and, therefore, the service model this task shall be synchronised and, therefore, the service model
must allow this specification. In addition, RDs must be also must allow this specification. In addition, RDs must be also
synchronised to avoid collisions in RD allocation between separated synchronised to avoid collisions in RD allocation between separated
systems. A incorrect allocation might lead into same RD and IP systems. A incorrect allocation might lead into same RD and IP
prefixes being exported by different PE routers. prefixes being exported by different PE routers.
3.3. Remote Far-End Configuration 3.5. Remote Far-End Configuration
Depending on the control plane implementation, different network Depending on the control plane implementation, different network
scenarios might require additional information for the L3 VPN service scenarios might require additional information for the L3 VPN service
to be configured and active. For example, an L3 VPN Option C to be configured and active. For example, an L3 VPN Option C
service, if no reflection of IPv4 VPN routes is configured via ASBR service, if no reflection of IPv4 VPN routes is configured via ASBR
or route reflector, may require additional configuration (e.g. a new or route reflector, may require additional configuration (e.g. a new
BGP neighbour) to be coordinated between both management systems. BGP neighbour) to be coordinated between both management systems.
This definition requires for every management system participant on This definition requires for every management system participant on
the VPN to receive not just their own sites and site-network- the VPN to receive not just their own sites and site-network-
accesses, but also to receive information about external ones, accesses, but also to receive information about external ones,
identified as an external site-network-access-type. In addition, identified as an external site-network-access-type. In addition,
this particular site-network-access is augmented to include the this particular site-network-access is augmented to include the
loopback address of the far-end (remote/external) PE router. loopback address of the far-end (remote/external) PE router.
3.4. Provide Edge Identification Point 3.6. Provide Edge Identification Point
RFC8299 states that The "bearer-reference" parameter is used in cases RFC8299 states that The "bearer-reference" parameter is used in cases
where the customer has already ordered a network connection to the SP where the customer has already ordered a network connection to the SP
apart from the IP VPN site and wants to reuse this connection. The apart from the IP VPN site and wants to reuse this connection. The
string used is an internal reference from the SP and describe the string used is an internal reference from the SP and describe the
already-available connection. Oftenly, a client interface (either a already-available connection. Oftenly, a client interface (either a
customer one or an interface used by the SP) is already in place and customer one or an interface used by the SP) is already in place and
connected, although it has not being used previously. In some other connected, although it has not being used previously. In some other
cases (e.g. for stitching purposes), the termination of a VPN service cases (e.g. for stitching purposes), the termination of a VPN service
is done over logical terminations within a PE router. is done over logical terminations within a PE router.
skipping to change at page 11, line 5 skipping to change at page 10, line 30
address of the external router. The last augment includes address of the external router. The last augment includes
information below layer 3 that is required for the service. In information below layer 3 that is required for the service. In
particular, we include information related to clients interface particular, we include information related to clients interface
encapsulation and aggregation. encapsulation and aggregation.
The high-level model structure proposed by this document is as shown The high-level model structure proposed by this document is as shown
below: below:
|-------------------- EXAMPLE --------------------| |-------------------- EXAMPLE --------------------|
module: ietf-l3vpn-svc-ext module: ietf-l3vpn-ntw
augment /l3vpn-svc:l3vpn-svc/l3vpn-svc:sites/l3vpn-svc:site/l3vpn-svc:site-network-accesses/l3vpn-svc:site-network-access: +--rw l3vpn-ntw
+--rw transport +--rw vpn-profiles
+--rw vpn-targets | +--rw valid-provider-identifiers
+--rw vpn-target* [route-target] | +--rw cloud-identifier* [id] {cloud-access}?
| +--rw route-target rt-types:route-target | | +--rw id string
| +--rw route-target-type rt-types:route-target-type | +--rw encryption-profile-identifier* [id]
+--rw route-policy? -> /rt-pol:routing-policy/policy-definitions/policy-definition/name | | +--rw id string
augment /l3vpn-svc:l3vpn-svc/l3vpn-svc:sites/l3vpn-svc:site/l3vpn-svc:site-network-accesses/l3vpn-svc:site-network-access: | +--rw qos-profile-identifier* [id]
+--rw far-end | | +--rw id string
+--rw address? inet:ip-address | +--rw bfd-profile-identifier* [id]
augment /l3vpn-svc:l3vpn-svc/l3vpn-svc:sites/l3vpn-svc:site/l3vpn-svc:site-network-accesses/l3vpn-svc:site-network-access/l3vpn-svc:bearer: | | +--rw id string
+--rw ethernet | +--rw routing-profile-identifier* [id]
+--rw connection | +--rw id string
+--rw encapsulation-type? identityref +--rw vpn-services
+--rw eth-inf-type? identityref | +--rw vpn-service* [vpn-id]
+--rw tagged-interface | +--rw vpn-id svc-id
| +--rw type? identityref | +--rw customer-name? string
| +--rw dot1q-vlan-tagged {dot1q}? | +--rw vpn-service-topology? identityref
| | +--rw tg-type? identityref | +--rw description? string
| | +--rw cvlan-id uint16 | +--rw ie-profiles
| +--rw priority-tagged | | +--rw ie-profile* [ie-profile-id]
| | +--rw tag-type? identityref | | +--rw ie-profile-id string
| +--rw qinq {qinq}? | | +--rw rd? rt-types:route-distinguisher
| | +--rw tag-type? identityref | | +--rw vpn-targets
| | +--rw svlan-id uint16 | | +--rw vpn-target* [route-target]
| | +--rw cvlan-id uint16 | | +--rw route-target rt-types:route-target
| +--rw qinany {qinany}? | | +--rw route-target-type rt-types:route-target-type
| | +--rw tag-type? identityref | +--rw vpn-nodes
| | +--rw svlan-id uint16 | | +--rw vpn-node* [vpn-node-id ne-id]
| +--rw vxlan {vxlan}? | | +--rw vpn-node-id string
| +--rw vni-id uint32 | | +--rw description? string
| +--rw peer-mode? identityref | | +--rw ne-id string
| +--rw peer-list* [peer-ip] | | +--rw router-id? inet:ipv4-address
| +--rw peer-ip inet:ip-address | | +--rw autonomous-system? uint32
+--rw untagged-interface | | +--rw node-role? identityref
| +--rw speed? uint32 | | +--rw status
| +--rw mode? neg-mode | | | +--rw admin-enabled? boolean
| +--rw phy-mtu? uint32 | | | +--ro oper-status? operational-type
| +--rw lldp? boolean | | +--rw maximum-routes
| +--rw oam-802.3ah-link {oam-3ah}? | | | +--rw address-family* [af]
| | +--rw enabled? boolean | | | +--rw af address-family
| +--rw uni-loop-prevention? boolean | | | +--rw maximum-routes? uint32
| | +--rw node-ie-profile? -> /l3vpn-ntw/vpn-services/vpn-service/ie-profiles/ie-profile/ie-profile-id
| | +--rw site-attachments
| | +--rw site-attachment* [site-id]
| | +--rw site-id -> /l3vpn-ntw/sites/site/site-id
| | +--rw site-network-access-id* -> /l3vpn-ntw/sites/site/site-network-accesses/site-network-access/site-network-access-id
| +--rw cloud-accesses {cloud-access}?
| | +--rw cloud-access* [cloud-identifier]
| | +--rw cloud-identifier -> /l3vpn-ntw/vpn-profiles/valid-provider-identifiers/cloud-identifier/id
| | +--rw (list-flavor)?
| | | +--:(permit-any)
| | | | +--rw permit-any? empty
| | | +--:(deny-any-except)
| | | | +--rw permit-site* -> /l3vpn-ntw/sites/site/site-id
| | | +--:(permit-any-except)
| | | +--rw deny-site* -> /l3vpn-ntw/sites/site/site-id
| | +--rw address-translation
| | +--rw nat44
| | +--rw enabled? boolean
| | +--rw nat44-customer-address? inet:ipv4-address
| +--rw multicast {multicast}?
| | +--rw enabled? boolean
| | +--rw customer-tree-flavors
| | | +--rw tree-flavor* identityref
| | +--rw rp
| | +--rw rp-group-mappings
| | | +--rw rp-group-mapping* [id]
| | | +--rw id uint16
| | | +--rw provider-managed
| | | | +--rw enabled? boolean
| | | | +--rw rp-redundancy? boolean
| | | | +--rw optimal-traffic-delivery? boolean
| | | +--rw rp-address inet:ip-address
| | | +--rw groups
| | | +--rw group* [id]
| | | +--rw id uint16
| | | +--rw (group-format)
| | | +--:(singleaddress)
| | | | +--rw group-address? inet:ip-address
| | | +--:(startend)
| | | +--rw group-start? inet:ip-address
| | | +--rw group-end? inet:ip-address
| | +--rw rp-discovery
| | +--rw rp-discovery-type? identityref
| | +--rw bsr-candidates
| | +--rw bsr-candidate-address* inet:ip-address
| +--rw carrierscarrier? boolean {carrierscarrier}?
| +--rw extranet-vpns {extranet-vpn}?
| +--rw extranet-vpn* [vpn-id]
| +--rw vpn-id svc-id
| +--rw local-sites-role? identityref
+--rw sites
+--rw site* [site-id]
+--rw site-id svc-id
+--rw description? string
+--rw requested-site-start? yang:date-and-time
+--rw requested-site-stop? yang:date-and-time
+--rw locations
| +--rw location* [location-id]
| +--rw location-id svc-id
| +--rw address? string
| +--rw postal-code? string
| +--rw state? string
| +--rw city? string
| +--rw country-code? string
+--rw devices
| +--rw device* [device-id]
| +--rw device-id svc-id
| +--rw location -> ../../../locations/location/location-id
| +--rw management
| +--rw address-family? address-family
| +--rw address inet:ip-address
+--rw site-diversity {site-diversity}?
| +--rw groups
| +--rw group* [group-id]
| +--rw group-id string
+--rw management
| +--rw type identityref
+--rw vpn-policies
| +--rw vpn-policy* [vpn-policy-id]
| +--rw vpn-policy-id svc-id
| +--rw entries* [id]
| +--rw id svc-id
| +--rw filters
| | +--rw filter* [type]
| | +--rw type identityref
| | +--rw lan-tag* string {lan-tag}?
| | +--rw ipv4-lan-prefix* inet:ipv4-prefix {ipv4}?
| | +--rw ipv6-lan-prefix* inet:ipv6-prefix {ipv6}?
| +--rw vpn* [vpn-id]
| +--rw vpn-id -> /l3vpn-ntw/vpn-services/vpn-service/vpn-id
| +--rw site-role? identityref
+--rw site-vpn-flavor? identityref
+--rw maximum-routes
| +--rw address-family* [af]
| +--rw af address-family
| +--rw maximum-routes? uint32
+--rw security
| +--rw authentication
| +--rw encryption {encryption}?
| +--rw enabled? boolean
| +--rw layer? enumeration
| +--rw encryption-profile
| +--rw (profile)?
| +--:(provider-profile)
| | +--rw profile-name? -> /l3vpn-ntw/vpn-profiles/valid-provider-identifiers/encryption-profile-identifier/id
| +--:(customer-profile)
| +--rw algorithm? string
| +--rw (key-type)?
| +--:(psk)
| +--rw preshared-key? string
+--rw service
| +--rw qos {qos}?
| | +--rw qos-classification-policy
| | | +--rw rule* [id]
| | | +--rw id string
| | | +--rw (match-type)?
| | | | +--:(match-flow)
| | | | | +--rw match-flow
| | | | | +--rw dscp? inet:dscp
| | | | | +--rw dot1p? uint8
| | | | | +--rw ipv4-src-prefix? inet:ipv4-prefix
| | | | | +--rw ipv6-src-prefix? inet:ipv6-prefix
| | | | | +--rw ipv4-dst-prefix? inet:ipv4-prefix
| | | | | +--rw ipv6-dst-prefix? inet:ipv6-prefix
| | | | | +--rw l4-src-port? inet:port-number
| | | | | +--rw target-sites* svc-id {target-sites}?
| | | | | +--rw l4-src-port-range
| | | | | | +--rw lower-port? inet:port-number
| | | | | | +--rw upper-port? inet:port-number
| | | | | +--rw l4-dst-port? inet:port-number
| | | | | +--rw l4-dst-port-range
| | | | | | +--rw lower-port? inet:port-number
| | | | | | +--rw upper-port? inet:port-number
| | | | | +--rw protocol-field? union
| | | | +--:(match-application)
| | | | +--rw match-application? identityref
| | | +--rw target-class-id? string
| | +--rw qos-profile
| | +--rw (qos-profile)?
| | +--:(standard)
| | | +--rw profile? -> /l3vpn-ntw/vpn-profiles/valid-provider-identifiers/qos-profile-identifier/id
| | +--:(custom)
| | +--rw classes {qos-custom}?
| | +--rw class* [class-id]
| | +--rw class-id string
| | +--rw direction? identityref
| | +--rw rate-limit? decimal64
| | +--rw latency
| | | +--rw (flavor)?
| | | +--:(lowest)
| | | | +--rw use-lowest-latency? empty
| | | +--:(boundary)
| | | +--rw latency-boundary? uint16
| | +--rw jitter
| | | +--rw (flavor)?
| | | +--:(lowest)
| | | | +--rw use-lowest-jitter? empty
| | | +--:(boundary)
| | | +--rw latency-boundary? uint32
| | +--rw bandwidth
| | +--rw guaranteed-bw-percent decimal64
| | +--rw end-to-end? empty
| +--rw carrierscarrier {carrierscarrier}?
| | +--rw signalling-type? enumeration
| +--rw multicast {multicast}?
| +--rw multicast-site-type? enumeration
| +--rw multicast-address-family
| | +--rw ipv4? boolean {ipv4}?
| | +--rw ipv6? boolean {ipv6}?
| +--rw protocol-type? enumeration
+--rw traffic-protection {fast-reroute}?
| +--rw enabled? boolean
+--rw routing-protocols
| +--rw routing-protocol* [type]
| +--rw type identityref
| +--rw routing-profiles* [id]
| | +--rw id -> /l3vpn-ntw/vpn-profiles/valid-provider-identifiers/routing-profile-identifier/id
| | +--rw type? ie-type
| +--rw ospf {rtg-ospf}?
| | +--rw address-family* address-family
| | +--rw area-address yang:dotted-quad
| | +--rw metric? uint16
| | +--rw mtu? uint16
| | +--rw security
| | | +--rw auth-key? string
| | +--rw sham-links {rtg-ospf-sham-link}?
| | +--rw sham-link* [target-site]
| | +--rw target-site svc-id
| | +--rw metric? uint16
| +--rw bgp {rtg-bgp}?
| | +--rw autonomous-system uint32
| | +--rw address-family* address-family
| | +--rw neighbor? inet:ip-address
| | +--rw multihop? uint8
| | +--rw security
| | +--rw auth-key? string
| +--rw static
| | +--rw cascaded-lan-prefixes
| | +--rw ipv4-lan-prefixes* [lan next-hop] {ipv4}?
| | | +--rw lan inet:ipv4-prefix
| | | +--rw lan-tag? string
| | | +--rw next-hop inet:ipv4-address
| | +--rw ipv6-lan-prefixes* [lan next-hop] {ipv6}?
| | +--rw lan inet:ipv6-prefix
| | +--rw lan-tag? string
| | +--rw next-hop inet:ipv6-address
| +--rw rip {rtg-rip}?
| | +--rw address-family* address-family
| +--rw vrrp {rtg-vrrp}?
| +--rw address-family* address-family
+--ro actual-site-start? yang:date-and-time
+--ro actual-site-stop? yang:date-and-time
+--rw site-bearers
| +--rw bearer* [bearer-id]
| +--rw bearer-id string
| +--rw ne-id? string
| +--rw port-id? string
+--rw site-network-accesses
+--rw site-network-access* [site-network-access-id]
+--rw site-network-access-id svc-id
+--rw description? string
+--rw status
| +--rw admin-enabled? boolean
| +--ro oper-status? operational-type
+--rw site-network-access-type? identityref
+--rw (location-flavor)
| +--:(location)
| | +--rw location-reference? -> ../../../locations/location/location-id
| +--:(device)
| +--rw device-reference? -> ../../../devices/device/device-id
+--rw access-diversity {site-diversity}?
| +--rw groups
| | +--rw group* [group-id]
| | +--rw group-id string
| +--rw constraints
| +--rw constraint* [constraint-type]
| +--rw constraint-type identityref
| +--rw target
| +--rw (target-flavor)?
| +--:(id)
| | +--rw group* [group-id]
| | +--rw group-id string
| +--:(all-accesses)
| | +--rw all-other-accesses? empty
| +--:(all-groups)
| +--rw all-other-groups? empty
+--rw bearer
| +--rw requested-type {requested-type}?
| | +--rw requested-type? string
| | +--rw strict? boolean
| +--rw always-on? boolean {always-on}?
| +--rw bearer-reference? string {bearer-reference}?
| +--rw connection
| | +--rw encapsulation-type? identityref
| | +--rw eth-inf-type? identityref
| | +--rw tagged-interface
| | +--rw type? identityref
| | +--rw dot1q-vlan-tagged {dot1q}?
| | | +--rw tg-type? identityref
| | | +--rw cvlan-id uint16
| | +--rw priority-tagged
| | | +--rw tag-type? identityref
| | +--rw qinq {qinq}?
| | | +--rw tag-type? identityref
| | | +--rw svlan-id uint16
| | | +--rw cvlan-id uint16
| | +--rw qinany {qinany}?
| | | +--rw tag-type? identityref
| | | +--rw svlan-id uint16
| | +--rw vxlan {vxlan}?
| | +--rw vni-id uint32
| | +--rw peer-mode? identityref
| | +--rw peer-list* [peer-ip]
| | +--rw peer-ip inet:ip-address
| +--rw pseudowire
| +--rw vcid? uint32
+--rw ip-connection
| +--rw ipv4 {ipv4}?
| | +--rw address-allocation-type? identityref
| | +--rw provider-dhcp
| | | +--rw provider-address? inet:ipv4-address
| | | +--rw prefix-length? uint8
| | | +--rw (address-assign)?
| | | +--:(number)
| | | | +--rw number-of-dynamic-address? uint16
| | | +--:(explicit)
| | | +--rw customer-addresses
| | | +--rw address-group* [group-id]
| | | +--rw group-id string
| | | +--rw start-address? inet:ipv4-address
| | | +--rw end-address? inet:ipv4-address
| | +--rw dhcp-relay
| | | +--rw provider-address? inet:ipv4-address
| | | +--rw prefix-length? uint8
| | | +--rw customer-dhcp-servers
| | | +--rw server-ip-address* inet:ipv4-address
| | +--rw addresses
| | +--rw provider-address? inet:ipv4-address
| | +--rw customer-address? inet:ipv4-address
| | +--rw prefix-length? uint8
| +--rw ipv6 {ipv6}?
| | +--rw address-allocation-type? identityref
| | +--rw provider-dhcp
| | | +--rw provider-address? inet:ipv6-address
| | | +--rw prefix-length? uint8
| | | +--rw (address-assign)?
| | | +--:(number)
| | | | +--rw number-of-dynamic-address? uint16
| | | +--:(explicit)
| | | +--rw customer-addresses
| | | +--rw address-group* [group-id]
| | | +--rw group-id string
| | | +--rw start-address? inet:ipv6-address
| | | +--rw end-address? inet:ipv6-address
| | +--rw dhcp-relay
| | | +--rw provider-address? inet:ipv6-address
| | | +--rw prefix-length? uint8
| | | +--rw customer-dhcp-servers
| | | +--rw server-ip-address* inet:ipv6-address
| | +--rw addresses
| | +--rw provider-address? inet:ipv6-address
| | +--rw customer-address? inet:ipv6-address
| | +--rw prefix-length? uint8
| +--rw oam
| +--rw bfd {bfd}?
| +--rw enabled? boolean
| +--rw (holdtime)?
| +--:(fixed)
| | +--rw fixed-value? uint32
| +--:(profile)
| +--rw profile-name? -> /l3vpn-ntw/vpn-profiles/valid-provider-identifiers/bfd-profile-identifier/id
+--rw security
| +--rw authentication
| +--rw encryption {encryption}?
| +--rw enabled? boolean
| +--rw layer? enumeration
| +--rw encryption-profile
| +--rw (profile)?
| +--:(provider-profile)
| | +--rw profile-name? -> /l3vpn-ntw/vpn-profiles/valid-provider-identifiers/encryption-profile-identifier/id
| +--:(customer-profile)
| +--rw algorithm? string
| +--rw (key-type)?
| +--:(psk)
| +--rw preshared-key? string
+--rw service
| +--rw svc-input-bandwidth uint64
| +--rw svc-output-bandwidth uint64
| +--rw svc-mtu uint16
| +--rw qos {qos}?
| | +--rw qos-classification-policy
| | | +--rw rule* [id]
| | | +--rw id string
| | | +--rw (match-type)?
| | | | +--:(match-flow)
| | | | | +--rw match-flow
| | | | | +--rw dscp? inet:dscp
| | | | | +--rw dot1p? uint8
| | | | | +--rw ipv4-src-prefix? inet:ipv4-prefix
| | | | | +--rw ipv6-src-prefix? inet:ipv6-prefix
| | | | | +--rw ipv4-dst-prefix? inet:ipv4-prefix
| | | | | +--rw ipv6-dst-prefix? inet:ipv6-prefix
| | | | | +--rw l4-src-port? inet:port-number
| | | | | +--rw target-sites* svc-id {target-sites}?
| | | | | +--rw l4-src-port-range
| | | | | | +--rw lower-port? inet:port-number
| | | | | | +--rw upper-port? inet:port-number
| | | | | +--rw l4-dst-port? inet:port-number
| | | | | +--rw l4-dst-port-range
| | | | | | +--rw lower-port? inet:port-number
| | | | | | +--rw upper-port? inet:port-number
| | | | | +--rw protocol-field? union
| | | | +--:(match-application)
| | | | +--rw match-application? identityref
| | | +--rw target-class-id? string
| | +--rw qos-profile
| | +--rw (qos-profile)?
| | +--:(standard)
| | | +--rw profile? -> /l3vpn-ntw/vpn-profiles/valid-provider-identifiers/qos-profile-identifier/id
| | +--:(custom)
| | +--rw classes {qos-custom}?
| | +--rw class* [class-id]
| | +--rw class-id string
| | +--rw direction? identityref
| | +--rw rate-limit? decimal64
| | +--rw latency
| | | +--rw (flavor)?
| | | +--:(lowest)
| | | | +--rw use-lowest-latency? empty
| | | +--:(boundary)
| | | +--rw latency-boundary? uint16
| | +--rw jitter
| | | +--rw (flavor)?
| | | +--:(lowest)
| | | | +--rw use-lowest-jitter? empty
| | | +--:(boundary)
| | | +--rw latency-boundary? uint32
| | +--rw bandwidth
| | +--rw guaranteed-bw-percent decimal64
| | +--rw end-to-end? empty
| +--rw carrierscarrier {carrierscarrier}?
| | +--rw signalling-type? enumeration
| +--rw multicast {multicast}?
| +--rw multicast-site-type? enumeration
| +--rw multicast-address-family
| | +--rw ipv4? boolean {ipv4}?
| | +--rw ipv6? boolean {ipv6}?
| +--rw protocol-type? enumeration
+--rw routing-protocols
| +--rw routing-protocol* [type]
| +--rw type identityref
| +--rw routing-profiles* [id]
| | +--rw id -> /l3vpn-ntw/vpn-profiles/valid-provider-identifiers/routing-profile-identifier/id
| | +--rw type? ie-type
| +--rw ospf {rtg-ospf}?
| | +--rw address-family* address-family
| | +--rw area-address yang:dotted-quad
| | +--rw metric? uint16
| | +--rw mtu? uint16
| | +--rw security
| | | +--rw auth-key? string
| | +--rw sham-links {rtg-ospf-sham-link}?
| | +--rw sham-link* [target-site]
| | +--rw target-site svc-id
| | +--rw metric? uint16
| +--rw bgp {rtg-bgp}?
| | +--rw autonomous-system uint32
| | +--rw address-family* address-family
| | +--rw neighbor? inet:ip-address
| | +--rw multihop? uint8
| | +--rw security
| | +--rw auth-key? string
| +--rw static
| | +--rw cascaded-lan-prefixes
| | +--rw ipv4-lan-prefixes* [lan next-hop] {ipv4}?
| | | +--rw lan inet:ipv4-prefix
| | | +--rw lan-tag? string
| | | +--rw next-hop inet:ipv4-address
| | +--rw ipv6-lan-prefixes* [lan next-hop] {ipv6}?
| | +--rw lan inet:ipv6-prefix
| | +--rw lan-tag? string
| | +--rw next-hop inet:ipv6-address
| +--rw rip {rtg-rip}?
| | +--rw address-family* address-family
| +--rw vrrp {rtg-vrrp}?
| +--rw address-family* address-family
+--rw availability
+--rw access-priority? uint32
Figure 3 Figure 3
5. Acknowledgements 5. Yang module
Thanks to Adrian Farrel and Miguel Cros for the suggestions on the |-------------------- EXAMPLE --------------------|
document
<CODE BEGINS>file "ietf-l3vpn-ntw@2019-07-04.yang"
module ietf-l3vpn-ntw {
yang-version 1.1;
namespace "urn:ietf:params:xml:ns:yang:ietf-l3vpn-ntw";
prefix l3vpn-ntw;
import ietf-inet-types {
prefix inet;
}
import ietf-yang-types {
prefix yang;
}
import ietf-netconf-acm {
prefix nacm;
}
import ietf-routing-types {
prefix rt-types;
}
organization
"DRAFT Proposal";
contact
"WG List: draft proposal
Editor:
draft proposal
Chairs:
";
description
"This YANG module defines a generic network-oriented model
for the configuration of Layer 3 VPNs. This model is common
across all vendor implementations.
Copyright (c) 2018 IETF Trust and the persons
identified as authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with or
without modification, is permitted pursuant to, and subject
to the license terms contained in, the Simplified BSD License
set forth in Section 4.c of the IETF Trust's Legal Provisions
Relating to IETF Documents
(https://trustee.ietf.org/license-info).
This version of this YANG module is based on RFC 8299; see
the RFC itself for full legal notices.";
revision 2019-07-04 {
description
"Initial document. The document as a whole is based on L3SM
module, defined in RFC 8299, modified to fit the requirements
of the platforms at the network layer.";
reference
"RFC 8049.";
}
/* Features */
feature cloud-access {
description
"Allows the VPN to connect to a CSP.";
}
feature multicast {
description
"Enables multicast capabilities in a VPN.";
}
feature ipv4 {
description
"Enables IPv4 support in a VPN.";
}
feature ipv6 {
description
"Enables IPv6 support in a VPN.";
}
feature lan-tag {
description
"Enables LAN Tag support in a VPN Policy filter.";
}
feature carrierscarrier {
description
"Enables support of CsC.";
}
feature extranet-vpn {
description
"Enables support of extranet VPNs.";
}
feature site-diversity {
description
"Enables support of site diversity constraints.";
}
feature encryption {
description
"Enables support of encryption.";
}
feature qos {
description
"Enables support of classes of services.";
}
feature qos-custom {
description
"Enables support of the custom QoS profile.";
}
feature rtg-bgp {
description
"Enables support of the BGP routing protocol.";
}
feature rtg-rip {
description
"Enables support of the RIP routing protocol.";
}
feature rtg-ospf {
description
"Enables support of the OSPF routing protocol.";
}
feature rtg-ospf-sham-link {
description
"Enables support of OSPF sham links.";
}
feature rtg-vrrp {
description
"Enables support of the VRRP routing protocol.";
}
feature fast-reroute {
description
"Enables support of Fast Reroute.";
}
feature bfd {
description
"Enables support of BFD.";
}
feature always-on {
description
"Enables support of the 'always-on' access constraint.";
}
feature requested-type {
description
"Enables support of the 'requested-type' access constraint.";
}
feature bearer-reference {
description
"Enables support of the 'bearer-reference' access constraint.";
}
feature target-sites {
description
"Enables support of the 'target-sites' match flow parameter.";
}
/* Typedefs */
typedef svc-id {
type string;
description
"Defines a type of service component identifier.";
}
typedef template-id {
type string;
description
"Defines a type of service template identifier.";
}
typedef address-family {
type enumeration {
enum ipv4 {
description
"IPv4 address family.";
}
enum ipv6 {
description
"IPv6 address family.";
}
}
description
"Defines a type for the address family.";
}
typedef ie-type {
type enumeration {
enum "import" {
value 0;
description "Import routing profile.";
}
enum "export" {
value 1;
description "Export routing profile";
}
enum "both" {
value 2;
description "Import/Export routing profile";
}
}
}
typedef operational-type {
type enumeration {
enum "up" {
value 0;
description "Operational status UP.";
}
enum "down" {
value 1;
description "Operational status DOWN";
}
enum "unknown" {
value 2;
description "Operational status UNKNOWN";
}
}
}
/* Identities */
identity site-network-access-type {
description
"Base identity for site-network-access type.";
}
identity point-to-point {
base site-network-access-type;
description
"Identity for point-to-point connection.";
}
/* Extension */
identity pseudowire {
base site-network-access-type;
description
"Identity for pseudowire connection.";
}
identity loopback {
base site-network-access-type;
description
"Identity for an internal loobpack interface.";
}
/* End of Extension */
identity multipoint {
base site-network-access-type;
description
"Identity for multipoint connection.
Example: Ethernet broadcast segment.";
}
identity placement-diversity {
description
"Base identity for site placement constraints.";
}
identity bearer-diverse {
base placement-diversity;
description
"Identity for bearer diversity.
The bearers should not use common elements.";
}
identity pe-diverse {
base placement-diversity;
description
"Identity for PE diversity.";
}
identity pop-diverse {
base placement-diversity;
description
"Identity for POP diversity.";
}
identity linecard-diverse {
base placement-diversity;
description
"Identity for linecard diversity.";
}
identity same-pe {
base placement-diversity;
description
"Identity for having sites connected on the same PE.";
}
identity same-bearer {
base placement-diversity;
description
"Identity for having sites connected using the same bearer.";
}
identity customer-application {
description
"Base identity for customer application.";
}
identity web {
base customer-application;
description
"Identity for Web application (e.g., HTTP, HTTPS).";
}
identity mail {
base customer-application;
description
"Identity for mail application.";
}
identity file-transfer {
base customer-application;
description
"Identity for file transfer application (e.g., FTP, SFTP).";
}
identity database {
base customer-application;
description
"Identity for database application.";
}
identity social {
base customer-application;
description
"Identity for social-network application.";
}
identity games {
base customer-application;
description
"Identity for gaming application.";
}
identity p2p {
base customer-application;
description
"Identity for peer-to-peer application.";
}
identity network-management {
base customer-application;
description
"Identity for management application
(e.g., Telnet, syslog, SNMP).";
}
identity voice {
base customer-application;
description
"Identity for voice application.";
}
identity video {
base customer-application;
description
"Identity for video conference application.";
}
identity embb {
base customer-application;
description
"Identity for an enhanced Mobile Broadband (eMBB)
application. Note that an eMBB application demands
network performance with a wide variety of
characteristics, such as data rate, latency,
loss rate, reliability, and many other parameters.";
}
identity urllc {
base customer-application;
description
"Identity for an Ultra-Reliable and Low Latency
Communications (URLLC) application. Note that a
URLLC application demands network performance
with a wide variety of characteristics, such as latency,
reliability, and many other parameters.";
}
identity mmtc {
base customer-application;
description
"Identity for a massive Machine Type
Communications (mMTC) application. Note that an
mMTC application demands network performance
with a wide variety of characteristics, such as data
rate, latency, loss rate, reliability, and many
other parameters.";
}
identity site-vpn-flavor {
description
"Base identity for the site VPN service flavor.";
}
identity site-vpn-flavor-single {
base site-vpn-flavor;
description
"Base identity for the site VPN service flavor.
Used when the site belongs to only one VPN.";
}
identity site-vpn-flavor-multi {
base site-vpn-flavor;
description
"Base identity for the site VPN service flavor.
Used when a logical connection of a site
belongs to multiple VPNs.";
}
identity site-vpn-flavor-sub {
base site-vpn-flavor;
description
"Base identity for the site VPN service flavor.
Used when a site has multiple logical connections.
Each connection may belong to different multiple VPNs.";
}
identity site-vpn-flavor-nni {
base site-vpn-flavor;
description
"Base identity for the site VPN service flavor.
Used to describe an NNI option A connection.";
}
identity management {
description
"Base identity for site management scheme.";
}
identity co-managed {
base management;
description
"Base identity for co-managed site.";
}
identity customer-managed {
base management;
description
"Base identity for customer-managed site.";
}
identity provider-managed {
base management;
description
"Base identity for provider-managed site.";
}
identity address-allocation-type {
description
"Base identity for address-allocation-type for PE-CE link.";
}
identity provider-dhcp {
base address-allocation-type;
description
"Provider network provides DHCP service to customer.";
}
identity provider-dhcp-relay {
base address-allocation-type;
description
"Provider network provides DHCP relay service to customer.";
}
identity provider-dhcp-slaac {
base address-allocation-type;
description
"Provider network provides DHCP service to customer,
as well as SLAAC.";
}
identity static-address {
base address-allocation-type;
description
"Provider-to-customer addressing is static.";
}
identity slaac {
base address-allocation-type;
description
"Use IPv6 SLAAC.";
}
identity site-role {
description
"Base identity for site type.";
}
identity any-to-any-role {
base site-role;
description
"Site in an any-to-any IP VPN.";
}
identity spoke-role {
base site-role;
description
"Spoke site in a Hub-and-Spoke IP VPN.";
}
identity hub-role {
base site-role;
description
"Hub site in a Hub-and-Spoke IP VPN.";
}
identity vpn-topology {
description
"Base identity for VPN topology.";
}
identity any-to-any {
base vpn-topology;
description
"Identity for any-to-any VPN topology.";
}
identity hub-spoke {
base vpn-topology;
description
"Identity for Hub-and-Spoke VPN topology.";
}
identity hub-spoke-disjoint {
base vpn-topology;
description
"Identity for Hub-and-Spoke VPN topology
where Hubs cannot communicate with each other.";
}
identity multicast-tree-type {
description
"Base identity for multicast tree type.";
}
identity ssm-tree-type {
base multicast-tree-type;
description
"Identity for SSM tree type.";
}
identity asm-tree-type {
base multicast-tree-type;
description
"Identity for ASM tree type.";
}
identity bidir-tree-type {
base multicast-tree-type;
description
"Identity for bidirectional tree type.";
}
identity multicast-rp-discovery-type {
description
"Base identity for RP discovery type.";
}
identity auto-rp {
base multicast-rp-discovery-type;
description
"Base identity for Auto-RP discovery type.";
}
identity static-rp {
base multicast-rp-discovery-type;
description
"Base identity for static type.";
}
identity bsr-rp {
base multicast-rp-discovery-type;
description
"Base identity for BSR discovery type.";
}
identity routing-protocol-type {
description
"Base identity for routing protocol type.";
}
identity ospf {
base routing-protocol-type;
description
"Identity for OSPF protocol type.";
}
identity bgp {
base routing-protocol-type;
description
"Identity for BGP protocol type.";
}
identity static {
base routing-protocol-type;
description
"Identity for static routing protocol type.";
}
identity rip {
base routing-protocol-type;
description
"Identity for RIP protocol type.";
}
identity vrrp {
base routing-protocol-type;
description
"Identity for VRRP protocol type.
This is to be used when LANs are directly connected
to PE routers.";
}
identity direct {
base routing-protocol-type;
description
"Identity for direct protocol type.";
}
identity protocol-type {
description
"Base identity for protocol field type.";
}
identity tcp {
base protocol-type;
description
"TCP protocol type.";
}
identity udp {
base protocol-type;
description
"UDP protocol type.";
}
identity icmp {
base protocol-type;
description
"ICMP protocol type.";
}
identity icmp6 {
base protocol-type;
description
"ICMPv6 protocol type.";
}
identity gre {
base protocol-type;
description
"GRE protocol type.";
}
identity ipip {
base protocol-type;
description
"IP-in-IP protocol type.";
}
identity hop-by-hop {
base protocol-type;
description
"Hop-by-Hop IPv6 header type.";
}
identity routing {
base protocol-type;
description
"Routing IPv6 header type.";
}
identity esp {
base protocol-type;
description
"ESP header type.";
}
identity ah {
base protocol-type;
description
"AH header type.";
}
identity vpn-policy-filter-type {
description
"Base identity for VPN Policy filter type.";
}
identity ipv4 {
base vpn-policy-filter-type;
description
"Identity for IPv4 Prefix filter type.";
}
identity ipv6 {
base vpn-policy-filter-type;
description
"Identity for IPv6 Prefix filter type.";
}
identity lan {
base vpn-policy-filter-type;
description
"Identity for LAN Tag filter type.";
}
identity qos-profile-direction {
description
"Base identity for QoS profile direction.";
}
identity site-to-wan {
base qos-profile-direction;
description
"Identity for Site-to-WAN direction.";
}
identity wan-to-site {
base qos-profile-direction;
description
"Identity for WAN-to-Site direction.";
}
identity both {
base qos-profile-direction;
description
"Identity for both WAN-to-Site direction
and Site-to-WAN direction.";
}
/* Extended Identities */
identity encapsulation-type {
description
"Identity for the encapsulation type.";
}
identity ethernet {
base encapsulation-type;
description
"Identity for Ethernet type.";
}
identity vlan {
base encapsulation-type;
description
"Identity for the VLAN type.";
}
identity eth-inf-type {
description
"Identity of the Ethernet interface type.";
}
identity tagged {
base eth-inf-type;
description
"Identity of the tagged interface type.";
}
identity untagged {
base eth-inf-type;
description
"Identity of the untagged interface type.";
}
identity lag {
base eth-inf-type;
description
"Identity of the LAG interface type.";
}
identity tagged-inf-type {
description
"Identity for the tagged interface type.";
}
identity priority-tagged {
base tagged-inf-type;
description
"Identity for the priority-tagged interface.";
}
identity qinq {
base tagged-inf-type;
description
"Identity for the QinQ tagged interface.";
}
identity dot1q {
base tagged-inf-type;
description
"Identity for the dot1Q VLAN tagged interface.";
}
identity qinany {
base tagged-inf-type;
description
"Identity for the QinAny tagged interface.";
}
identity vxlan {
base tagged-inf-type;
description
"Identity for the VXLAN tagged interface.";
}
identity tag-type {
description
"Base identity from which all tag types are derived.";
}
identity c-vlan {
base tag-type;
description
"A CVLAN tag, normally using the 0x8100 Ethertype.";
}
identity s-vlan {
base tag-type;
description
"An SVLAN tag.";
}
identity c-s-vlan {
base tag-type;
description
"Using both a CVLAN tag and an SVLAN tag.";
}
identity vxlan-peer-mode {
description
"Base identity for the VXLAN peer mode.";
}
identity static-mode {
base vxlan-peer-mode;
description
"Identity for VXLAN access in the static mode.";
}
identity bgp-mode {
base vxlan-peer-mode;
description
"Identity for VXLAN access by BGP EVPN learning.";
}
identity bw-direction {
description
"Identity for the bandwidth direction.";
}
identity input-bw {
base bw-direction;
description
"Identity for the input bandwidth.";
}
identity output-bw {
base bw-direction;
description
"Identity for the output bandwidth.";
}
identity bw-type {
description
"Identity of the bandwidth type.";
}
identity bw-per-cos {
base bw-type;
description
"Bandwidth is per CoS.";
}
identity bw-per-port {
base bw-type;
description
"Bandwidth is per site network access.";
}
identity bw-per-site {
base bw-type;
description
"Bandwidth is per site. It is applicable to
all the site network accesses within the site.";
}
identity bw-per-svc {
base bw-type;
description
"Bandwidth is per VPN service.";
}
/* Groupings */
grouping vpn-service-cloud-access {
container cloud-accesses {
if-feature cloud-access;
list cloud-access {
key cloud-identifier;
leaf cloud-identifier {
type leafref {
path "/l3vpn-ntw/vpn-profiles/"+
"valid-provider-identifiers/cloud-identifier/id";
}
description
"Identification of cloud service.
Local administration meaning.";
}
choice list-flavor {
case permit-any {
leaf permit-any {
type empty;
description
"Allows all sites.";
}
}
case deny-any-except {
leaf-list permit-site {
type leafref {
path "/l3vpn-ntw/sites/site/site-id";
}
description
"Site ID to be authorized.";
}
}
case permit-any-except {
leaf-list deny-site {
type leafref {
path "/l3vpn-ntw/sites/site/site-id";
}
description
"Site ID to be denied.";
}
}
description
"Choice for cloud access policy. By
default, all sites in the IP VPN MUST
be authorized to access the cloud.";
}
container address-translation {
container nat44 {
leaf enabled {
type boolean;
default false;
description
"Controls whether or not Network address
translation from IPv4 to IPv4 (NAT44)
[RFC3022] is required.";
}
leaf nat44-customer-address {
type inet:ipv4-address;
description
"Address to be used for network address
translation from IPv4 to IPv4. This is
to be used if the customer is providing
the IPv4 address. If the customer address
is not set, the model assumes that the
provider will allocate the address.";
}
description
"IPv4-to-IPv4 translation.";
}
description
"Container for NAT.";
}
description
"Cloud access configuration.";
}
description
"Container for cloud access configurations.";
}
description
"Grouping for VPN cloud definition.";
}
grouping multicast-rp-group-cfg {
choice group-format {
mandatory true;
case singleaddress {
leaf group-address {
type inet:ip-address;
description
"A single multicast group address.";
}
}
case startend {
leaf group-start {
type inet:ip-address;
description
"The first multicast group address in
the multicast group address range.";
}
leaf group-end {
type inet:ip-address;
description
"The last multicast group address in
the multicast group address range.";
}
}
description
"Choice for multicast group format.";
}
description
"This grouping defines multicast group or
multicast groups for RP-to-group mapping.";
}
grouping vpn-service-multicast {
container multicast {
if-feature multicast;
leaf enabled {
type boolean;
default false;
description
"Enables multicast.";
}
container customer-tree-flavors {
leaf-list tree-flavor {
type identityref {
base multicast-tree-type;
}
description
"Type of tree to be used.";
}
description
"Type of trees used by customer.";
}
container rp {
container rp-group-mappings {
list rp-group-mapping {
key id;
leaf id {
type uint16;
description
"Unique identifier for the mapping.";
}
container provider-managed {
leaf enabled {
type boolean;
default false;
description
"Set to true if the Rendezvous Point (RP)
must be a provider-managed node. Set to false
if it is a customer-managed node.";
}
leaf rp-redundancy {
type boolean;
default false;
description
"If true, a redundancy mechanism for the RP
is required.";
}
leaf optimal-traffic-delivery {
type boolean;
default false;
description
"If true, the SP must ensure that
traffic uses an optimal path. An SP may use
Anycast RP or RP-tree-to-SPT switchover
architectures.";
}
description
"Parameters for a provider-managed RP.";
}
leaf rp-address {
when "../provider-managed/enabled = 'false'" {
description
"Relevant when the RP is not provider-managed.";
}
type inet:ip-address;
mandatory true;
description
"Defines the address of the RP.
Used if the RP is customer-managed.";
}
container groups {
list group {
key id;
leaf id {
type uint16;
description
"Identifier for the group.";
}
uses multicast-rp-group-cfg;
description
"List of multicast groups.";
}
description
"Multicast groups associated with the RP.";
}
description
"List of RP-to-group mappings.";
}
description
"RP-to-group mappings parameters.";
}
container rp-discovery {
leaf rp-discovery-type {
type identityref {
base multicast-rp-discovery-type;
}
default static-rp;
description
"Type of RP discovery used.";
}
container bsr-candidates {
when "derived-from-or-self(../rp-discovery-type, "+
"'l3vpn-ntw:bsr-rp')" {
description
"Only applicable if discovery type
is BSR-RP.";
}
leaf-list bsr-candidate-address {
type inet:ip-address;
description
"Address of BSR candidate.";
}
description
"Container for List of Customer
BSR candidate's addresses.";
}
description
"RP discovery parameters.";
}
description
"RP parameters.";
}
description
"Multicast global parameters for the VPN service.";
}
description
"Grouping for multicast VPN definition.";
}
grouping vpn-service-mpls {
leaf carrierscarrier {
if-feature carrierscarrier;
type boolean;
default false;
description
"The VPN is using CsC, and so MPLS is required.";
}
description
"Grouping for MPLS CsC definition.";
}
grouping customer-location-info {
container locations {
list location {
key location-id;
leaf location-id {
type svc-id;
description
"Identifier for a particular location.";
}
leaf address {
type string;
description
"Address (number and street) of the site.";
}
leaf postal-code {
type string;
description
"Postal code of the site.";
}
leaf state {
type string;
description
"State of the site. This leaf can also be
used to describe a region for a country that
does not have states.";
}
leaf city {
type string;
description
"City of the site.";
}
leaf country-code {
type string {
pattern '[A-Z]{2}';
}
description
"Country of the site.
Expressed as ISO ALPHA-2 code.";
}
description
"Location of the site.";
}
description
"List of locations for the site.";
}
description
"This grouping defines customer location parameters.";
}
grouping site-group {
container groups {
list group {
key group-id;
leaf group-id {
type string;
description
"Group-id the site belongs to.";
}
description
"List of group-ids.";
}
description
"Groups the site or site-network-access belongs to.";
}
description
"Grouping definition to assign
group-ids to site or site-network-access.";
}
grouping site-diversity {
container site-diversity {
if-feature site-diversity;
uses site-group;
description
"Diversity constraint type. All
site-network-accesses will inherit
the group values defined here.";
}
description
"This grouping defines site
diversity parameters.";
}
grouping access-diversity {
container access-diversity {
if-feature site-diversity;
uses site-group;
container constraints {
list constraint {
key constraint-type;
leaf constraint-type {
type identityref {
base placement-diversity;
}
description
"Diversity constraint type.";
}
container target {
choice target-flavor {
default id;
case id {
list group {
key group-id;
leaf group-id {
type string;
description
"The constraint will be applied against
this particular group-id for this site
network access level.";
}
description
"List of group-ids associated with one specific
constraint for this site network access level.";
}
}
case all-accesses {
leaf all-other-accesses {
type empty;
description
"The constraint will be applied against
all other site network accesses of this site.";
}
}
case all-groups {
leaf all-other-groups {
type empty;
description
"The constraint will be applied against
all other groups managed by the customer.";
}
}
description
"Choice for the target flavor definition.";
}
description
"The constraint will be applied against a
Specific target, and the target can be a list
of group-ids,all other site network accesses of
this site, or all other groups managed by the
customer.";
}
description
"List of constraints.";
}
description
"Placement constraints for this site network access.";
}
description
"Diversity parameters.";
}
description
"This grouping defines access diversity parameters.";
}
grouping operational-requirements {
leaf requested-site-start {
type yang:date-and-time;
description
"Optional leaf indicating requested date and
time when the service at a particular site is
expected to start.";
}
leaf requested-site-stop {
type yang:date-and-time;
description
"Optional leaf indicating requested date and
time when the service at a particular site is
expected to stop.";
}
description
"This grouping defines some operational
parameters.";
}
grouping operational-requirements-ops {
leaf actual-site-start {
type yang:date-and-time;
config false;
description
"Optional leaf indicating actual date and
time when the service at a particular site
actually started.";
}
leaf actual-site-stop {
type yang:date-and-time;
config false;
description
"Optional leaf indicating actual date and
time when the service at a particular site
actually stopped.";
}
description
"This grouping defines some operational
parameters.";
}
grouping flow-definition {
container match-flow {
leaf dscp {
type inet:dscp;
description
"DSCP value.";
}
leaf dot1p {
type uint8 {
range "0..7";
}
description
"802.1p matching.";
}
leaf ipv4-src-prefix {
type inet:ipv4-prefix;
description
"Match on IPv4 src address.";
}
leaf ipv6-src-prefix {
type inet:ipv6-prefix;
description
"Match on IPv6 src address.";
}
leaf ipv4-dst-prefix {
type inet:ipv4-prefix;
description
"Match on IPv4 dst address.";
}
leaf ipv6-dst-prefix {
type inet:ipv6-prefix;
description
"Match on IPv6 dst address.";
}
leaf l4-src-port {
type inet:port-number;
must "current() < ../l4-src-port-range/lower-port or "+
"current() > ../l4-src-port-range/upper-port" {
description
"If l4-src-port and l4-src-port-range/lower-port and
upper-port are set at the same time, l4-src-port
should not overlap with l4-src-port-range.";
}
description
"Match on Layer 4 src port.";
}
leaf-list target-sites {
if-feature target-sites;
type svc-id;
description
"Identify a site as traffic destination.";
}
container l4-src-port-range {
leaf lower-port {
type inet:port-number;
description
"Lower boundary for port.";
}
leaf upper-port {
type inet:port-number;
must ". >= ../lower-port" {
description
"Upper boundary for port. If it
exists, the upper boundary must be
higher than the lower boundary.";
}
description
"Upper boundary for port.";
}
description
"Match on Layer 4 src port range. When
only the lower-port is present, it represents
a single port. When both the lower-port and
upper-port are specified, it implies
a range inclusive of both values.";
}
leaf l4-dst-port {
type inet:port-number;
must "current() < ../l4-dst-port-range/lower-port or "+
"current() > ../l4-dst-port-range/upper-port" {
description
"If l4-dst-port and l4-dst-port-range/lower-port
and upper-port are set at the same time,
l4-dst-port should not overlap with
l4-src-port-range.";
}
description
"Match on Layer 4 dst port.";
}
container l4-dst-port-range {
leaf lower-port {
type inet:port-number;
description
"Lower boundary for port.";
}
leaf upper-port {
type inet:port-number;
must ". >= ../lower-port" {
description
"Upper boundary must be
higher than lower boundary.";
}
description
"Upper boundary for port. If it exists,
upper boundary must be higher than lower
boundary.";
}
description
"Match on Layer 4 dst port range. When only
lower-port is present, it represents a single
port. When both lower-port and upper-port are
specified, it implies a range inclusive of both
values.";
}
leaf protocol-field {
type union {
type uint8;
type identityref {
base protocol-type;
}
}
description
"Match on IPv4 protocol or IPv6 Next Header field.";
}
description
"Describes flow-matching criteria.";
}
description
"Flow definition based on criteria.";
}
grouping site-service-basic {
leaf svc-input-bandwidth {
type uint64;
units bps;
mandatory true;
description
"From the customer site's perspective, the service
input bandwidth of the connection or download
bandwidth from the SP to the site.";
}
leaf svc-output-bandwidth {
type uint64;
units bps;
mandatory true;
description
"From the customer site's perspective, the service
output bandwidth of the connection or upload
bandwidth from the site to the SP.";
}
leaf svc-mtu {
type uint16;
units bytes;
mandatory true;
description
"MTU at service level. If the service is IP,
it refers to the IP MTU. If CsC is enabled,
the requested 'svc-mtu' leaf will refer to the
MPLS MTU and not to the IP MTU.";
}
description
"Defines basic service parameters for a site.";
}
grouping site-protection {
container traffic-protection {
if-feature fast-reroute;
leaf enabled {
type boolean;
default false;
description
"Enables traffic protection of access link.";
}
description
"Fast Reroute service parameters for the site.";
}
description
"Defines protection service parameters for a site.";
}
grouping site-service-mpls {
container carrierscarrier {
if-feature carrierscarrier;
leaf signalling-type {
type enumeration {
enum ldp {
description
"Use LDP as the signalling protocol
between the PE and the CE. In this case,
an IGP routing protocol must also be activated.";
}
enum bgp {
description
"Use BGP (as per RFC 8277) as the signalling protocol
between the PE and the CE.
In this case, BGP must also be configured as
the routing protocol.";
}
}
default bgp;
description
"MPLS signalling type.";
}
description
"This container is used when the customer provides
MPLS-based services. This is only used in the case
of CsC (i.e., a customer builds an MPLS service using
an IP VPN to carry its traffic).";
}
description
"Defines MPLS service parameters for a site.";
}
grouping site-service-qos-profile {
container qos {
if-feature qos;
container qos-classification-policy {
list rule {
key id;
ordered-by user;
leaf id {
type string;
description
"A description identifying the
qos-classification-policy rule.";
}
choice match-type {
default match-flow;
case match-flow {
uses flow-definition;
}
case match-application {
leaf match-application {
type identityref {
base customer-application;
}
description
"Defines the application to match.";
}
}
description
"Choice for classification.";
}
leaf target-class-id {
type string;
description
"Identification of the class of service.
This identifier is internal to the administration.";
}
description
"List of marking rules.";
}
description
"Configuration of the traffic classification policy.";
}
container qos-profile {
choice qos-profile {
description
"Choice for QoS profile.
Can be standard profile or customized profile.";
case standard {
description
"Standard QoS profile.";
leaf profile {
type leafref {
path "/l3vpn-ntw/vpn-profiles/valid-provider-identifiers"+
"/qos-profile-identifier/id";
}
description
"QoS profile to be used.";
}
}
case custom {
description
"Customized QoS profile.";
container classes {
if-feature qos-custom;
list class {
key class-id;
leaf class-id {
type string;
description
"Identification of the class of service.
This identifier is internal to the
administration.";
}
leaf direction {
type identityref {
base qos-profile-direction;
}
default both;
description
"The direction to which the QoS profile
is applied.";
}
leaf rate-limit {
type decimal64 {
fraction-digits 5;
range "0..100";
}
units percent;
description
"To be used if the class must be rate-limited.
Expressed as percentage of the service
bandwidth.";
}
container latency {
choice flavor {
case lowest {
leaf use-lowest-latency {
type empty;
description
"The traffic class should use the path with the
lowest latency.";
}
}
case boundary {
leaf latency-boundary {
type uint16;
units msec;
default 400;
description
"The traffic class should use a path with a
defined maximum latency.";
}
}
description
"Latency constraint on the traffic class.";
}
description
"Latency constraint on the traffic class.";
}
container jitter {
choice flavor {
case lowest {
leaf use-lowest-jitter {
type empty;
description
"The traffic class should use the path with the
lowest jitter.";
}
}
case boundary {
leaf latency-boundary {
type uint32;
units usec;
default 40000;
description
"The traffic class should use a path with a
defined maximum jitter.";
}
}
description
"Jitter constraint on the traffic class.";
}
description
"Jitter constraint on the traffic class.";
}
container bandwidth {
leaf guaranteed-bw-percent {
type decimal64 {
fraction-digits 5;
range "0..100";
}
units percent;
mandatory true;
description
"To be used to define the guaranteed bandwidth
as a percentage of the available service bandwidth.";
}
leaf end-to-end {
type empty;
description
"Used if the bandwidth reservation
must be done on the MPLS network too.";
}
description
"Bandwidth constraint on the traffic class.";
}
description
"List of classes of services.";
}
description
"Container for list of classes of services.";
}
}
}
description
"QoS profile configuration.";
}
description
"QoS configuration.";
}
description
"This grouping defines QoS parameters for a site.";
}
grouping site-security-authentication {
container authentication {
description
"Authentication parameters.";
}
description
"This grouping defines authentication parameters for a site.";
}
grouping site-security-encryption {
container encryption {
if-feature encryption;
leaf enabled {
type boolean;
default false;
description
"If true, traffic encryption on the connection is required.";
}
leaf layer {
when "../enabled = 'true'" {
description
"Require a value for layer when enabled is true.";
}
type enumeration {
enum layer2 {
description
"Encryption will occur at Layer 2.";
}
enum layer3 {
description
"Encryption will occur at Layer 3.
For example, IPsec may be used when
a customer requests Layer 3 encryption.";
}
}
description
"Layer on which encryption is applied.";
}
container encryption-profile {
choice profile {
case provider-profile {
leaf profile-name {
type leafref {
path "/l3vpn-ntw/vpn-profiles/valid-provider-identifiers"+
"/encryption-profile-identifier/id";
}
description
"Name of the SP profile to be applied.";
}
}
case customer-profile {
leaf algorithm {
type string;
description
"Encryption algorithm to be used.";
}
choice key-type {
default psk;
case psk {
leaf preshared-key {
type string;
description
"Pre-Shared Key (PSK) coming from the customer.";
}
}
description
"Type of keys to be used.";
}
}
description
"Choice of encryption profile. The encryption
profile can be the provider profile or customer profile.";
}
description
"Profile of encryption to be applied.";
}
description
"Encryption parameters.";
}
description
"This grouping defines encryption parameters for a site.";
}
grouping site-attachment-bearer {
container bearer {
container requested-type {
if-feature requested-type;
leaf requested-type {
type string;
description
"Type of requested bearer: Ethernet, DSL,
Wireless, etc. Operator specific.";
}
leaf strict {
type boolean;
default false;
description
"Defines whether requested-type is a preference
or a strict requirement.";
}
description
"Container for requested-type.";
}
leaf always-on {
if-feature always-on;
type boolean;
default true;
description
"Request for an always-on access type.
For example, this could mean no dial access type.";
}
/* TODO: to be modified */
leaf bearer-reference {
if-feature bearer-reference;
type string;
description
"This is an internal reference for the SP.";
}
description
"Bearer-specific parameters.
To be augmented.";
uses ethernet-params;
/* TODO: Verify the path ../site-network-access-type */
uses pseudowire-params {
when "../site-network-access-type='pseudowire'" {
description "Parameters associated to a pseudowire
site-network-access";
}
}
}
description
"Defines physical properties of a site attachment.";
}
grouping site-routing {
container routing-protocols {
list routing-protocol {
key type;
leaf type {
type identityref {
base routing-protocol-type;
}
description
"Type of routing protocol.";
}
list routing-profiles {
key "id";
leaf id {
type leafref {
path "/l3vpn-ntw/vpn-profiles/valid-provider-identifiers"+
"/routing-profile-identifier/id";
}
description
"Routing profile to be used.";
}
leaf type {
type ie-type;
description
"Import, export or both.";
}
}
container ospf {
when "derived-from-or-self(../type, 'l3vpn-ntw:ospf')" {
description
"Only applies when protocol is OSPF.";
}
if-feature rtg-ospf;
leaf-list address-family {
type address-family;
min-elements "1";
description
"If OSPF is used on this site, this node
contains a configured value. This node
contains at least one address family
to be activated.";
}
leaf area-address {
type yang:dotted-quad;
mandatory true;
description
"Area address.";
}
leaf metric {
type uint16;
default 1;
description
"Metric of the PE-CE link. It is used
in the routing state calculation and
path selection.";
}
/* Extension */
leaf mtu {
type uint16;
description "Maximum transmission unit for a given
OSPF link.";
}
uses security-params;
/* End of Extension */
container sham-links {
if-feature rtg-ospf-sham-link;
list sham-link {
key target-site;
leaf target-site {
type svc-id;
description
"Target site for the sham link connection.
The site is referred to by its ID.";
}
leaf metric {
type uint16;
default 1;
description
"Metric of the sham link. It is used in
the routing state calculation and path
selection. The default value is set
to 1.";
}
description
"Creates a sham link with another site.";
}
description
"List of sham links.";
}
description
"OSPF-specific configuration.";
}
container bgp {
when "derived-from-or-self(../type, 'l3vpn-ntw:bgp')" {
description
"Only applies when protocol is BGP.";
}
if-feature rtg-bgp;
leaf autonomous-system {
type uint32;
mandatory true;
description
"Customer AS number in case the customer
requests BGP routing.";
}
leaf-list address-family {
type address-family;
min-elements "1";
description
"If BGP is used on this site, this node
contains a configured value. This node
contains at least one address family
to be activated.";
}
/* Extension */
leaf neighbor {
type inet:ip-address;
description
"IP address of the BGP neighbor.";
}
leaf multihop {
type uint8;
mandatory false;
description
"Describes the number of hops allowed between the
given BGP neighbor and the PE router.";
}
uses security-params;
description
"BGP-specific configuration.";
}
container static {
when "derived-from-or-self(../type, 'l3vpn-ntw:static')" {
description
"Only applies when protocol is static.
BGP activation requires the SP to know
the address of the customer peer. When
BGP is enabled, the 'static-address'
allocation type for the IP connection
MUST be used.";
}
container cascaded-lan-prefixes {
list ipv4-lan-prefixes {
if-feature ipv4;
key "lan next-hop";
leaf lan {
type inet:ipv4-prefix;
description
"LAN prefixes.";
}
leaf lan-tag {
type string;
description
"Internal tag to be used in VPN policies.";
}
leaf next-hop {
type inet:ipv4-address;
description
"Next-hop address to use on the customer side.";
}
description
"List of LAN prefixes for the site.";
}
list ipv6-lan-prefixes {
if-feature ipv6;
key "lan next-hop";
leaf lan {
type inet:ipv6-prefix;
description
"LAN prefixes.";
}
leaf lan-tag {
type string;
description
"Internal tag to be used in VPN policies.";
}
leaf next-hop {
type inet:ipv6-address;
description
"Next-hop address to use on the customer side.";
}
description
"List of LAN prefixes for the site.";
}
description
"LAN prefixes from the customer.";
}
description
"Configuration specific to static routing.";
}
container rip {
when "derived-from-or-self(../type, 'l3vpn-ntw:rip')" {
description
"Only applies when the protocol is RIP. For IPv4,
the model assumes that RIP version 2 is used.";
}
if-feature rtg-rip;
leaf-list address-family {
type address-family;
min-elements "1";
description
"If RIP is used on this site, this node
contains a configured value. This node
contains at least one address family
to be activated.";
}
description
"Configuration specific to RIP routing.";
}
container vrrp {
when "derived-from-or-self(../type, 'l3vpn-ntw:vrrp')" {
description
"Only applies when protocol is VRRP.";
}
if-feature rtg-vrrp;
leaf-list address-family {
type address-family;
min-elements "1";
description
"If VRRP is used on this site, this node
contains a configured value. This node contains
at least one address family to be activated.";
}
description
"Configuration specific to VRRP routing.";
}
description
"List of routing protocols used on
the site. This list can be augmented.";
}
description
"Defines routing protocols.";
}
description
"Grouping for routing protocols.";
}
grouping site-attachment-ip-connection {
container ip-connection {
container ipv4 {
if-feature ipv4;
leaf address-allocation-type {
type identityref {
base address-allocation-type;
}
must "not(derived-from-or-self(current(), 'l3vpn-ntw:slaac') or "+
"derived-from-or-self(current(), "+
"'l3vpn-ntw:provider-dhcp-slaac'))" {
error-message "SLAAC is only applicable to IPv6";
}
description
"Defines how addresses are allocated.
If there is no value for the address
allocation type, then IPv4 is not enabled.";
}
container provider-dhcp {
when "derived-from-or-self(../address-allocation-type, "+
"'l3vpn-ntw:provider-dhcp')" {
description
"Only applies when addresses are allocated by DHCP.";
}
leaf provider-address {
type inet:ipv4-address;
description
"Address of provider side. If provider-address is not
specified, then prefix length should not be specified
either. It also implies provider-dhcp allocation is
not enabled. If provider-address is specified, then
the prefix length may or may not be specified.";
}
leaf prefix-length {
type uint8 {
range "0..32";
}
must "(../provider-address)" {
error-message
"If the prefix length is specified, provider-address
must also be specified.";
description
"If the prefix length is specified, provider-address
must also be specified.";
}
description
"Subnet prefix length expressed in bits.
If not specified, or specified as zero,
this means the customer leaves the actual
prefix length value to the provider.";
}
choice address-assign {
default number;
case number {
leaf number-of-dynamic-address {
type uint16;
default 1;
description
"Describes the number of IP addresses
the customer requires.";
}
}
case explicit {
container customer-addresses {
list address-group {
key "group-id";
leaf group-id {
type string;
description
"Group-id for the address range from
start-address to end-address.";
}
leaf start-address {
type inet:ipv4-address;
description
"First address.";
}
leaf end-address {
type inet:ipv4-address;
description
"Last address.";
}
description
"Describes IP addresses allocated by DHCP.
When only start-address or only end-address
is present, it represents a single address.
When both start-address and end-address are
specified, it implies a range inclusive of both
addresses. If no address is specified, it implies
customer addresses group is not supported.";
}
description
"Container for customer addresses is allocated by DHCP.";
}
}
description
"Choice for the way to assign addresses.";
}
description
"DHCP allocated addresses related parameters.";
}
container dhcp-relay {
when "derived-from-or-self(../address-allocation-type, "+
"'l3vpn-ntw:provider-dhcp-relay')" {
description
"Only applies when provider is required to implement
DHCP relay function.";
}
leaf provider-address {
type inet:ipv4-address;
description
"Address of provider side. If provider-address is not
specified, then prefix length should not be specified
either. It also implies provider-dhcp allocation is
not enabled. If provider-address is specified, then
prefix length may or may not be specified.";
}
leaf prefix-length {
type uint8 {
range "0..32";
}
must "(../provider-address)" {
error-message
"If prefix length is specified, provider-address
must also be specified.";
description
"If prefix length is specified, provider-address
must also be specified.";
}
description
"Subnet prefix length expressed in bits. If not
specified, or specified as zero, this means the
customer leaves the actual prefix length value
to the provider.";
}
container customer-dhcp-servers {
leaf-list server-ip-address {
type inet:ipv4-address;
description
"IP address of customer DHCP server.";
}
description
"Container for list of customer DHCP servers.";
}
description
"DHCP relay provided by operator.";
}
container addresses {
when "derived-from-or-self(../address-allocation-type, "+
"'l3vpn-ntw:static-address')" {
description
"Only applies when protocol allocation type is static.";
}
leaf provider-address {
type inet:ipv4-address;
description
"IPv4 Address List of the provider side.
When the protocol allocation type is static,
the provider address must be configured.";
}
leaf customer-address {
type inet:ipv4-address;
description
"IPv4 Address of customer side.";
}
leaf prefix-length {
type uint8 {
range "0..32";
}
description
"Subnet prefix length expressed in bits.
It is applied to both provider-address
and customer-address.";
}
description
"Describes IPv4 addresses used.";
}
description
"IPv4-specific parameters.";
}
container ipv6 {
if-feature ipv6;
leaf address-allocation-type {
type identityref {
base address-allocation-type;
}
description
"Defines how addresses are allocated.
If there is no value for the address
allocation type, then IPv6 is
not enabled.";
}
container provider-dhcp {
when "derived-from-or-self(../address-allocation-type, "+
"'l3vpn-ntw:provider-dhcp') "+
"or derived-from-or-self(../address-allocation-type, "+
"'l3vpn-ntw:provider-dhcp-slaac')" {
description
"Only applies when addresses are allocated by DHCP.";
}
leaf provider-address {
type inet:ipv6-address;
description
"Address of the provider side. If provider-address
is not specified, then prefix length should not be
specified either. It also implies provider-dhcp
allocation is not enabled. If provider-address is
specified, then prefix length may or may
not be specified.";
}
leaf prefix-length {
type uint8 {
range "0..128";
}
must "(../provider-address)" {
error-message
"If prefix length is specified, provider-address
must also be specified.";
description
"If prefix length is specified, provider-address
must also be specified.";
}
description
"Subnet prefix length expressed in bits. If not
specified, or specified as zero, this means the
customer leaves the actual prefix length value
to the provider.";
}
choice address-assign {
default number;
case number {
leaf number-of-dynamic-address {
type uint16;
default 1;
description
"Describes the number of IP addresses the customer
requires.";
}
}
case explicit {
container customer-addresses {
list address-group {
key "group-id";
leaf group-id {
type string;
description
"Group-id for the address range from
start-address to end-address.";
}
leaf start-address {
type inet:ipv6-address;
description
"First address.";
}
leaf end-address {
type inet:ipv6-address;
description
"Last address.";
}
description
"Describes IP addresses allocated by DHCP. When only
start-address or only end-address is present, it
represents a single address. When both start-address
and end-address are specified, it implies a range
inclusive of both addresses. If no address is
specified, it implies customer addresses group is
not supported.";
}
description
"Container for customer addresses allocated by DHCP.";
}
}
description
"Choice for the way to assign addresses.";
}
description
"DHCP allocated addresses related parameters.";
}
container dhcp-relay {
when "derived-from-or-self(../address-allocation-type, "+
"'l3vpn-ntw:provider-dhcp-relay')" {
description
"Only applies when the provider is required
to implement DHCP relay function.";
}
leaf provider-address {
type inet:ipv6-address;
description
"Address of the provider side. If provider-address is
not specified, then prefix length should not be
specified either. It also implies provider-dhcp
allocation is not enabled. If provider address
is specified, then prefix length may or may
not be specified.";
}
leaf prefix-length {
type uint8 {
range "0..128";
}
must "(../provider-address)" {
error-message
"If prefix length is specified, provider-address
must also be specified.";
description
"If prefix length is specified, provider-address
must also be specified.";
}
description
"Subnet prefix length expressed in bits. If not
specified, or specified as zero, this means the
customer leaves the actual prefix length value
to the provider.";
}
container customer-dhcp-servers {
leaf-list server-ip-address {
type inet:ipv6-address;
description
"This node contains the IP address of
the customer DHCP server. If the DHCP relay
function is implemented by the
provider, this node contains the
configured value.";
}
description
"Container for list of customer DHCP servers.";
}
description
"DHCP relay provided by operator.";
}
container addresses {
when "derived-from-or-self(../address-allocation-type, "+
"'l3vpn-ntw:static-address')" {
description
"Only applies when protocol allocation type is static.";
}
leaf provider-address {
type inet:ipv6-address;
description
"IPv6 Address of the provider side. When the protocol
allocation type is static, the provider address
must be configured.";
}
leaf customer-address {
type inet:ipv6-address;
description
"The IPv6 Address of the customer side.";
}
leaf prefix-length {
type uint8 {
range "0..128";
}
description
"Subnet prefix length expressed in bits.
It is applied to both provider-address and
customer-address.";
}
description
"Describes IPv6 addresses used.";
}
description
"IPv6-specific parameters.";
}
container oam {
container bfd {
if-feature bfd;
leaf enabled {
type boolean;
default false;
description
"If true, BFD activation is required.";
}
choice holdtime {
default fixed;
case fixed {
leaf fixed-value {
type uint32;
units msec;
description
"Expected BFD holdtime expressed in msec. The customer
may impose some fixed values for the holdtime period
if the provider allows the customer use this function.
If the provider doesn't allow the customer to use this
function, the fixed-value will not be set.";
}
}
case profile {
leaf profile-name {
type leafref {
path "/l3vpn-ntw/vpn-profiles/valid-provider-identifiers/"+
"bfd-profile-identifier/id";
}
description
"Well-known SP profile name. The provider can propose
some profiles to the customer, depending on the service
level the customer wants to achieve. Profile names
must be communicated to the customer.";
}
description
"Well-known SP profile.";
}
description
"Choice for holdtime flavor.";
}
description
"Container for BFD.";
}
description
"Defines the Operations, Administration, and Maintenance (OAM)
mechanisms used on the connection. BFD is set as a fault
detection mechanism, but the 'oam' container can easily
be augmented by other mechanisms";
}
description
"Defines connection parameters.";
}
description
"This grouping defines IP connection parameters.";
}
grouping site-service-multicast {
container multicast {
if-feature multicast;
leaf multicast-site-type {
type enumeration {
enum receiver-only {
description
"The site only has receivers.";
}
enum source-only {
description
"The site only has sources.";
}
enum source-receiver {
description
"The site has both sources and receivers.";
}
}
default source-receiver;
description
"Type of multicast site.";
}
container multicast-address-family {
leaf ipv4 {
if-feature ipv4;
type boolean;
default false;
description
"Enables IPv4 multicast.";
}
leaf ipv6 {
if-feature ipv6;
type boolean;
default false;
description
"Enables IPv6 multicast.";
}
description
"Defines protocol to carry multicast.";
}
leaf protocol-type {
type enumeration {
enum host {
description
"Hosts are directly connected to the provider network.
Host protocols such as IGMP or MLD are required.";
}
enum router {
description
"Hosts are behind a customer router.
PIM will be implemented.";
}
enum both {
description
"Some hosts are behind a customer router, and
some others are directly connected to the
provider network. Both host and routing protocols
must be used. Typically, IGMP and PIM will be
implemented.";
}
}
default "both";
description
"Multicast protocol type to be used with the customer site.";
}
description
"Multicast parameters for the site.";
}
description
"Multicast parameters for the site.";
}
grouping site-management {
container management {
leaf type {
type identityref {
base management;
}
mandatory true;
description
"Management type of the connection.";
}
description
"Management configuration.";
}
description
"Management parameters for the site.";
}
grouping site-devices {
container devices {
when "derived-from-or-self(../management/type, "+
"'l3vpn-ntw:provider-managed') or "+
"derived-from-or-self(../management/type, 'l3vpn-ntw:co-managed')" {
description
"Applicable only for provider-managed or
co-managed device.";
}
list device {
key device-id;
leaf device-id {
type svc-id;
description
"Identifier for the device.";
}
leaf location {
type leafref {
path "../../../locations/"+
"location/location-id";
}
mandatory true;
description
"Location of the device.";
}
container management {
when "derived-from-or-self(../../../management/type,"+
"'l3vpn-ntw:co-managed')" {
description
"Applicable only for co-managed device.";
}
leaf address-family {
type address-family;
description
"Address family used for management.";
}
leaf address {
when "(../address-family)" {
description
"If address-family is specified, then address should
also be specified. If address-family is not specified,
then address should also not be specified.";
}
type inet:ip-address;
mandatory true;
description
"Management address.";
}
description
"Management configuration. Applicable only for
co-managed device.";
}
description
"List of devices requested by customer.";
}
description
"Device configuration.";
}
description
"Grouping for device allocation.";
}
grouping site-vpn-flavor {
leaf site-vpn-flavor {
type identityref {
base site-vpn-flavor;
}
default site-vpn-flavor-single;
description
"Defines the way the VPN multiplexing is done, e.g., whether
the site belongs to a single VPN site or a multiVPN; or, in the case
of a multiVPN, whether the logical accesses of the sites belong
to the same set of VPNs or each logical access maps to
different VPNs.";
}
description
"Grouping for site VPN flavor.";
}
grouping site-vpn-policy {
container vpn-policies {
list vpn-policy {
key vpn-policy-id;
leaf vpn-policy-id {
type svc-id;
description
"Unique identifier for the VPN policy.";
}
list entries {
key id;
leaf id {
type svc-id;
description
"Unique identifier for the policy entry.";
}
container filters {
list filter {
key type;
ordered-by user;
leaf type {
type identityref {
base vpn-policy-filter-type;
}
description
"Type of VPN Policy filter.";
}
leaf-list lan-tag {
when "derived-from-or-self(../type, 'l3vpn-ntw:lan')" {
description
"Only applies when the VPN Policy filter is a
LAN Tag filter.";
}
if-feature lan-tag;
type string;
description
"List of 'lan-tag' items to be matched. LAN Tag
is an Internal tag to be used in VPN policies ";
}
leaf-list ipv4-lan-prefix {
when "derived-from-or-self(../type, 'l3vpn-ntw:ipv4')" {
description
"Only applies when VPN Policy filter is IPv4 Prefix filter.";
}
if-feature ipv4;
type inet:ipv4-prefix;
description
"List of IPv4 prefixes as LAN Prefixes to be matched.";
}
leaf-list ipv6-lan-prefix {
when "derived-from-or-self(../type, 'l3vpn-ntw:ipv6')" {
description
"Only applies when VPN Policy filter is IPv6 Prefix filter.";
}
if-feature ipv6;
type inet:ipv6-prefix;
description
"List of IPv6 prefixes as LAN prefixes to be matched.";
}
description
"List of filters used on the site. This list can
be augmented.";
}
description
"If a more-granular VPN attachment is necessary, filtering can
be used. If used, it permits the splitting of site LANs among
multiple VPNs. The Site LAN can be split based on either LAN
Tag or LAN prefix. If no filter is used, all the LANs will be
part of the same VPNs with the same role.";
}
list vpn {
key vpn-id;
leaf vpn-id {
type leafref {
path "/l3vpn-ntw/vpn-services/"+
"vpn-service/vpn-id";
}
mandatory true;
description
"Reference to an IP VPN.";
}
leaf site-role {
type identityref {
base site-role;
}
default any-to-any-role;
description
"Role of the site in the IP VPN.";
}
description
"List of VPNs the LAN is associated with.";
}
description
"List of entries for export policy.";
}
description
"List of VPN policies.";
}
description
"VPN policy.";
}
description
"VPN policy parameters for the site.";
}
grouping site-maximum-routes {
container maximum-routes {
list address-family {
key af;
leaf af {
type address-family;
description
"Address family.";
}
leaf maximum-routes {
type uint32;
description
"Maximum prefixes the VRF can accept
for this address family.";
}
description
"List of address families.";
}
description
"Defines 'maximum-routes' for the VRF.";
}
description
"Defines 'maximum-routes' for the site.";
}
grouping site-security {
container security {
uses site-security-authentication;
uses site-security-encryption;
description
"Site-specific security parameters.";
}
description
"Grouping for security parameters.";
}
grouping site-service {
container service {
uses site-service-qos-profile;
uses site-service-mpls;
uses site-service-multicast;
description
"Service parameters on the attachment.";
}
description
"Grouping for service parameters.";
}
grouping site-network-access-service {
container service {
uses site-service-basic;
/* Extension */
/* uses svc-bandwidth-params; */
/* EoExt */
uses site-service-qos-profile;
uses site-service-mpls;
uses site-service-multicast;
description
"Service parameters on the attachment.";
}
description
"Grouping for service parameters.";
}
grouping vpn-extranet {
container extranet-vpns {
if-feature extranet-vpn;
list extranet-vpn {
key vpn-id;
leaf vpn-id {
type svc-id;
description
"Identifies the target VPN the local VPN want to access.";
}
leaf local-sites-role {
type identityref {
base site-role;
}
default any-to-any-role;
description
"This describes the role of the
local sites in the target VPN topology. In the any-to-any VPN
service topology, the local sites must have the same role, which
will be 'any-to-any-role'. In the Hub-and-Spoke VPN service
topology or the Hub-and-Spoke disjoint VPN service topology,
the local sites must have a Hub role or a Spoke role.";
}
description
"List of extranet VPNs or target VPNs the local VPN is
attached to.";
}
description
"Container for extranet VPN configuration.";
}
description
"Grouping for extranet VPN configuration.
This provides an easy way to interconnect
all sites from two VPNs.";
}
grouping site-attachment-availability {
container availability {
leaf access-priority {
type uint32;
default 100;
description
"Defines the priority for the access.
The higher the access-priority value,
the higher the preference of the
access will be.";
}
description
"Availability parameters (used for multihoming).";
}
description
"Defines availability parameters for a site.";
}
grouping access-vpn-policy {
container vpn-attachment {
choice attachment-flavor {
case vpn-policy-id {
leaf vpn-policy-id {
type leafref {
path "../../../../"+
"vpn-policies/vpn-policy/"+
"vpn-policy-id";
}
description
"Reference to a VPN policy. When referencing VPN
policy for attachment, the vpn-policy-id must be
configured.";
}
}
case vpn-id {
leaf vpn-id {
type leafref {
path "/l3vpn-ntw/vpn-services"+
"/vpn-service/vpn-id";
}
description
"Reference to an IP VPN. Referencing a vpn-id provides
an easy way to attach a particular logical access to
a VPN. In this case, vpn-id must be configured.";
}
leaf site-role {
type identityref {
base site-role;
}
default any-to-any-role;
description
"Role of the site in the IP VPN. When referencing a vpn-id,
the site-role setting must be added to express the role of
the site in the target VPN service topology.";
}
}
mandatory true;
description
"Choice for VPN attachment flavor. A choice is implemented
to allow the user to choose the flavor that provides the
best fit.";
}
description
"Defines VPN attachment of a site.";
}
description
"Defines the VPN attachment rules for
a site's logical access.";
}
grouping vpn-profile-cfg {
container valid-provider-identifiers {
list cloud-identifier {
if-feature cloud-access;
key id;
leaf id {
type string;
description
"Identification of cloud service.
Local administration meaning.";
}
description
"List for Cloud Identifiers.";
}
list encryption-profile-identifier {
key id;
leaf id {
type string;
description
"Identification of the SP encryption profile
to be used. Local administration meaning.";
}
description
"List for encryption profile identifiers.";
}
list qos-profile-identifier {
key id;
leaf id {
type string;
description
"Identification of the QoS Profile to be used.
Local administration meaning.";
}
description
"List for QoS Profile Identifiers.";
}
list bfd-profile-identifier {
key id;
leaf id {
type string;
description
"Identification of the SP BFD Profile to be used.
Local administration meaning.";
}
description
"List for BFD Profile identifiers.";
}
list routing-profile-identifier {
key id;
leaf id {
type string;
description
"Identification of the routing Profile to be used
by the routing-protocols within sites and site-
network-accesses. Local administration meaning.";
}
description
"List for Routing Profile Identifiers.";
}
nacm:default-deny-write;
description
"Container for Valid Provider Identifies.";
}
description
"Grouping for VPN Profile configuration.";
}
grouping vpn-svc-cfg {
leaf vpn-id {
type svc-id;
description
"VPN identifier. Local administration meaning.";
}
leaf customer-name {
type string;
description
"Name of the customer that actually uses the VPN service.
In the case that any intermediary (e.g., Tier-2 provider
or partner) sells the VPN service to their end user
on behalf of the original service provider (e.g., Tier-1
provider), the original service provider may require the
customer name to provide smooth activation/commissioning
and operation for the service.";
}
leaf vpn-service-topology {
type identityref {
base vpn-topology;
}
default any-to-any;
description
"VPN service topology.";
}
leaf description {
type string;
description
"Textual description of a VPN service.";
}
uses ie-profiles-params;
uses vpn-nodes-params;
uses vpn-service-cloud-access;
uses vpn-service-multicast;
uses vpn-service-mpls;
uses vpn-extranet;
description
"Grouping for VPN service configuration.";
}
grouping site-top-level-cfg {
uses operational-requirements;
uses customer-location-info;
uses site-devices;
uses site-diversity;
uses site-management;
uses site-vpn-policy;
uses site-vpn-flavor;
uses site-maximum-routes;
uses site-security;
uses site-service;
uses site-protection;
uses site-routing;
description
"Grouping for site top-level configuration.";
}
grouping site-network-access-top-level-cfg {
/* Extension */
uses status-params;
/* End of Extension */
leaf site-network-access-type {
type identityref {
base site-network-access-type;
}
default point-to-point;
description
"Describes the type of connection, e.g.,
point-to-point or multipoint.";
}
choice location-flavor {
case location {
when "derived-from-or-self(../../management/type, "+
"'l3vpn-ntw:customer-managed')" {
description
"Applicable only for customer-managed device.";
}
leaf location-reference {
type leafref {
path "../../../locations/location/location-id";
}
description
"Location of the site-network-access.";
}
}
case device {
when "derived-from-or-self(../../management/type, "+
"'l3vpn-ntw:provider-managed') or "+
"derived-from-or-self(../../management/type, "+
"'l3vpn-ntw:co-managed')" {
description
"Applicable only for provider-managed or co-managed device.";
}
leaf device-reference {
type leafref {
path "../../../devices/device/device-id";
}
description
"Identifier of CE to use.";
}
}
mandatory true;
description
"Choice of how to describe the site's location.";
}
uses access-diversity;
uses site-attachment-bearer;
uses site-attachment-ip-connection;
uses site-security;
uses site-network-access-service;
uses site-routing;
uses site-attachment-availability;
/*uses access-vpn-policy;*/
description
"Grouping for site network access top-level configuration.";
}
/* Extensions */
/* Bearers in a site */
grouping site-bearer-params {
description "Container that encloses all the bearers
connected to a site. A bearer is mapped one to one
to a port on the PE router.";
container site-bearers {
list bearer {
key "bearer-id";
leaf bearer-id {
description "Unique identifier for a bearer. This
identifies shall be mapped to the bearer-reference
on a site-network-access.";
type string;
}
leaf ne-id {
description "Unique identifier for a network
element. This identifier may be a string, a UUID,
an IP address, etc.";
type string;
}
leaf port-id {
description "Port of the PE router for the given
bearer.";
type string;
}
}
}
}
/* UNUSED */
grouping svc-bandwidth-params {
container svc-bandwidth {
if-feature "input-bw";
list bandwidth {
key "direction type";
leaf direction {
type identityref {
base bw-direction;
}
description
"Indicates the bandwidth direction. It can be
the bandwidth download direction from the SP to
the site or the bandwidth upload direction from
the site to the SP.";
}
leaf type {
type identityref {
base bw-type;
}
description
"Bandwidth type. By default, the bandwidth type
is set to 'bw-per-cos'.";
}
leaf cos-id {
when "derived-from-or-self(../type, "
+ "'l3vpn-ntw:bw-per-cos')" {
description
"Relevant when the bandwidth type is set to
'bw-per-cos'.";
}
type uint8;
description
"Identifier of the CoS, indicated by DSCP or a
CE-VLAN CoS (802.1p) value in the service frame.
If the bandwidth type is set to 'bw-per-cos',
the CoS ID MUST also be specified.";
}
leaf vpn-id {
when "derived-from-or-self(../type, "
+ "'l3vpn-ntw:bw-per-svc')" {
description
"Relevant when the bandwidth type is
set as bandwidth per VPN service.";
}
type svc-id;
description
"Identifies the target VPN. If the bandwidth
type is set as bandwidth per VPN service, the
vpn-id MUST be specified.";
}
leaf cir {
type uint64;
units "bps";
mandatory true;
description
"Committed Information Rate. The maximum number
of bits that a port can receive or send over
an interface in one second.";
}
leaf cbs {
type uint64;
units "bps";
mandatory true;
description
"Committed Burst Size (CBS). Controls the bursty
nature of the traffic. Traffic that does not
use the configured Committed Information Rate
(CIR) accumulates credits until the credits
reach the configured CBS.";
}
leaf eir {
type uint64;
units "bps";
description
"Excess Information Rate (EIR), i.e., excess frame
delivery allowed that is not subject to an SLA.
The traffic rate can be limited by the EIR.";
}
leaf ebs {
type uint64;
units "bps";
description
"Excess Burst Size (EBS). The bandwidth available
for burst traffic from the EBS is subject to the
amount of bandwidth that is accumulated during
periods when traffic allocated by the EIR
policy is not used.";
}
leaf pir {
type uint64;
units "bps";
description
"Peak Information Rate, i.e., maximum frame
delivery allowed. It is equal to or less
than the sum of the CIR and the EIR.";
}
leaf pbs {
type uint64;
units "bps";
description
"Peak Burst Size. It is measured in bytes per
second.";
}
description
"List of bandwidth values (e.g., per CoS,
per vpn-id).";
}
description
"From the customer site's perspective, the service
input/output bandwidth of the connection or
download/upload bandwidth from the SP/site
to the site/SP.";
}
}
grouping status-params {
container status {
description "Operational and administrative status for
different elements in the model.";
leaf admin-enabled {
description "True is the entity is administratively
enabled.";
type boolean;
}
leaf oper-status {
config false;
description "Operational status of the given entity
(UP, DOWN, UNKNOWN).";
type operational-type;
}
}
}
/* Parameters related to vpn-nodes (VRF config.) */
grouping vpn-nodes-params {
description "Grouping to define VRF-specific configuration.";
container vpn-nodes {
description "Container that defines VRF-specific configuration.";
list vpn-node {
key "vpn-node-id ne-id";
leaf vpn-node-id {
description "Identifier of the VPN node. It can be
identified or mapped as the VRF name. As it may not
be globally unique, the ne-id is also needed.";
type string;
}
leaf description {
type string;
description
"Textual description of a VPN node.";
}
leaf ne-id {
description "Unique identifier for a network element where
to instantiate the VRF. This identifier may be a string,
a UUID, an IP address, etc.";
type string;
}
leaf router-id {
description "In case of being necessary, it defines the IP
address to identify the VRF. If not specified, the IP of
the loopback interface within the base routing instance
will be used.";
type inet:ipv4-address;
}
leaf autonomous-system {
type uint32;
description
"AS number of the VRF.";
}
leaf node-role {
type identityref {
base site-role;
}
default any-to-any-role;
description
"Role of the vpn-node in the IP VPN.";
}
uses status-params;
/* Here we use the name given to the existing structure in sites */
uses site-maximum-routes;
leaf node-ie-profile {
description "Reference to an import export profile
defined within a VPN service.";
type leafref {
path "/l3vpn-ntw/vpn-services/"+
"vpn-service/ie-profiles/ie-profile/ie-profile-id";
}
}
container site-attachments {
list site-attachment {
key "site-id";
description "List of attachments (site-network-accesses)
that are connected to the VPN-node (VRF instance).";
leaf site-id {
description "Identifier of the site where the site-network-
access is located.";
type leafref{
path "/l3vpn-ntw/sites/site/site-id";
}
}
leaf-list site-network-access-id {
type leafref {
description "Identifier of the site-network-access to be
attached to the VPN node.";
path "/l3vpn-ntw/sites/site/site-network-accesses/"+
"site-network-access/site-network-access-id";
}
}
}
}
}
}
}
/* Parameters related to import and export profiles (RTs RDs.) */
grouping ie-profiles-params {
description "Grouping to specify rules for route import and export";
container ie-profiles {
list ie-profile {
key "ie-profile-id";
leaf ie-profile-id {
type string;
description
"Unique identifier for an import/export profile defined
within a VPN node.";
}
leaf rd {
type rt-types:route-distinguisher;
description
"Route distinguisher.";
}
container vpn-targets {
description
"Set of route-targets to match for import and export routes
to/from VRF";
uses rt-types:vpn-route-targets;
}
}
}
}
grouping pseudowire-params {
container pseudowire {
/*leaf far-end {*/
/* description "IP of the remote peer of the pseudowire.";*/
/* type inet:ip-address;*/
/*}*/
leaf vcid {
description "PW or virtual circuit identifier.";
type uint32;
}
}
}
grouping security-params {
container security {
description
"Container for aggregating any security parameter for routing
sessions between a PE and a CE.";
leaf auth-key {
type string;
description
"MD5 authentication password for the connection towards the
customer edge.";
}
}
}
grouping ethernet-params {
container connection {
leaf encapsulation-type {
type identityref {
base encapsulation-type;
}
default "ethernet";
description
"Encapsulation type. By default, the
encapsulation type is set to 'ethernet'.";
}
leaf eth-inf-type {
type identityref {
base eth-inf-type;
}
default "untagged";
description
"Ethernet interface type. By default, the
Ethernet interface type is set to 'untagged'.";
}
container tagged-interface {
leaf type {
type identityref {
base tagged-inf-type;
}
default "priority-tagged";
description
"Tagged interface type. By default,
the type of the tagged interface is
'priority-tagged'.";
}
container dot1q-vlan-tagged {
when "derived-from-or-self(../type, "
+ "'l3vpn-ntw:dot1q')" {
description
"Only applies when the type of the tagged
interface is 'dot1q'.";
}
if-feature "dot1q";
leaf tg-type {
type identityref {
base tag-type;
}
default "c-vlan";
description
"Tag type. By default, the tag type is
'c-vlan'.";
}
leaf cvlan-id {
type uint16;
mandatory true;
description
"VLAN identifier.";
}
description
"Tagged interface.";
}
container priority-tagged {
when "derived-from-or-self(../type, "
+ "'l3vpn-ntw:priority-tagged')" {
description
"Only applies when the type of the tagged
interface is 'priority-tagged'.";
}
leaf tag-type {
type identityref {
base tag-type;
}
default "c-vlan";
description
"Tag type. By default, the tag type is
'c-vlan'.";
}
description
"Priority tagged.";
}
container qinq {
when "derived-from-or-self(../type, "
+ "'l3vpn-ntw:qinq')" {
description
"Only applies when the type of the tagged
interface is 'qinq'.";
}
if-feature "qinq";
leaf tag-type {
type identityref {
base tag-type;
}
default "c-s-vlan";
description
"Tag type. By default, the tag type is
'c-s-vlan'.";
}
leaf svlan-id {
type uint16;
mandatory true;
description
"SVLAN identifier.";
}
leaf cvlan-id {
type uint16;
mandatory true;
description
"CVLAN identifier.";
}
description
"QinQ.";
}
container qinany {
when "derived-from-or-self(../type, "
+ "'l3vpn-ntw:qinany')" {
description
"Only applies when the type of the tagged
interface is 'qinany'.";
}
if-feature "qinany";
leaf tag-type {
type identityref {
base tag-type;
}
default "s-vlan";
description
"Tag type. By default, the tag type is
's-vlan'.";
}
leaf svlan-id {
type uint16;
mandatory true;
description
"SVLAN ID.";
}
description
"Container for QinAny.";
}
container vxlan {
when "derived-from-or-self(../type, "
+ "'l3vpn-ntw:vxlan')" {
description
"Only applies when the type of the tagged
interface is 'vxlan'.";
}
if-feature "vxlan";
leaf vni-id {
type uint32;
mandatory true;
description
"VXLAN Network Identifier (VNI).";
}
leaf peer-mode {
type identityref {
base vxlan-peer-mode;
}
default "static-mode";
description
"Specifies the VXLAN access mode. By default,
the peer mode is set to 'static-mode'.";
}
list peer-list {
key "peer-ip";
leaf peer-ip {
type inet:ip-address;
description
"Peer IP.";
}
description
"List of peer IP addresses.";
}
description
"QinQ.";
}
description
"Container for tagged interfaces.";
}
}
}
/* Main blocks */
container l3vpn-ntw {
container vpn-profiles {
uses vpn-profile-cfg;
description
"Container for VPN Profiles.";
}
container vpn-services {
list vpn-service {
key vpn-id;
uses vpn-svc-cfg;
description
"List of VPN services.";
}
description
"Top-level container for the VPN services.";
}
container sites {
list site {
key site-id;
leaf site-id {
type svc-id;
description
"Identifier of the site.";
}
leaf description {
type string;
description
"Textual description of a site.";
}
uses site-top-level-cfg;
uses operational-requirements-ops;
uses site-bearer-params;
container site-network-accesses {
list site-network-access {
key site-network-access-id;
leaf site-network-access-id {
type svc-id;
description
"Identifier for the access.";
}
leaf description {
type string;
description
"Textual description of a VPN service.";
}
uses site-network-access-top-level-cfg;
description
"List of accesses for a site.";
}
description
"List of accesses for a site.";
}
description
"List of sites.";
}
description
"Container for sites.";
}
description
"Main container for L3VPN service configuration.";
}
}
Figure 4
6. IANA Considerations 6. IANA Considerations
This memo includes no request to IANA. This memo includes no request to IANA.
7. Security Considerations 7. Security Considerations
All the security considerations of RFC 8299 [RFC8299] apply to this All the security considerations of RFC 8299 [RFC8299] apply to this
document. Subsequent versions will provide additional security document. Subsequent versions will provide additional security
considerations. considerations.
8. References 8. Implementation Status
8.1. Normative References This section will be used to track the status of the implementations
of the model. It is aimed at being removed if the document becomes
RFC.
9. Acknowledgements
Thanks to Adrian Farrel and Miguel Cros for the suggestions on the
document. Lots of thanks for the discussions on opsawg mailing list.
Some of the comments will be addressed in next versions
10. Contributors
Daniel King
Old Dog Consulting
Email: daniel@olddog.co.uk
Samier Barguil
Telefonica
Email: samier.barguilgiraldo.ext@telefonica.com
Luay Jalil
Verizon
Email: luay.jalil@verizon.com
Qin Wu
Huawei
Email: bill.wu@huawei.com>
11. References
11.1. Normative References
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119, Requirement Levels", BCP 14, RFC 2119,
DOI 10.17487/RFC2119, March 1997, DOI 10.17487/RFC2119, March 1997,
<https://www.rfc-editor.org/info/rfc2119>. <https://www.rfc-editor.org/info/rfc2119>.
8.2. Informative References 11.2. Informative References
[RFC6241] Enns, R., Ed., Bjorklund, M., Ed., Schoenwaelder, J., Ed., [RFC6241] Enns, R., Ed., Bjorklund, M., Ed., Schoenwaelder, J., Ed.,
and A. Bierman, Ed., "Network Configuration Protocol and A. Bierman, Ed., "Network Configuration Protocol
(NETCONF)", RFC 6241, DOI 10.17487/RFC6241, June 2011, (NETCONF)", RFC 6241, DOI 10.17487/RFC6241, June 2011,
<https://www.rfc-editor.org/info/rfc6241>. <https://www.rfc-editor.org/info/rfc6241>.
[RFC7950] Bjorklund, M., Ed., "The YANG 1.1 Data Modeling Language", [RFC7950] Bjorklund, M., Ed., "The YANG 1.1 Data Modeling Language",
RFC 7950, DOI 10.17487/RFC7950, August 2016, RFC 7950, DOI 10.17487/RFC7950, August 2016,
<https://www.rfc-editor.org/info/rfc7950>. <https://www.rfc-editor.org/info/rfc7950>.
 End of changes. 20 change blocks. 
95 lines changed or deleted 4231 lines changed or added

This html diff was produced by rfcdiff 1.47. The latest version is available from http://tools.ietf.org/tools/rfcdiff/