draft-ietf-adslmib-adsl2-01.txt   draft-ietf-adslmib-adsl2-02.txt 
INTERNET-DRAFT Supplemental ADSL Line MIB Faye Ly INTERNET-DRAFT Supplemental ADSL Line MIB Faye Ly
Copper Mountain Networks Copper Mountain Networks
Gregory Bathrick Gregory Bathrick
AG Communication Systems AG Communication Systems
June 24, October 20, 1999
1999
Definitions of Supplemental Managed Objects Definitions of Supplemental Managed Objects
for ADSL Lines for ADSL Lines
June 24, 1999 October 20, 1999
draft-ietf-adslmib-adsl2-01.txt draft-ietf-adslmib-adsl2-02.txt
1. Status of this Memo 1. Status of this Memo
This document is an Internet-Draft and is in full conformance with This document is an Internet-Draft and is in full conformance with
all provisions of Section 10 of RFC2026. all provisions of Section 10 of RFC2026.
Internet-Drafts are working documents of the Internet Engineering Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF), its areas, and its working groups. Note that other Task Force (IETF), its areas, and its working groups. Note that other
groups may also distribute working documents as Internet-Drafts. groups may also distribute working documents as Internet-Drafts.
skipping to change at page 3, line 4 skipping to change at page 2, line 50
A MIB conforming to the SMIv1 can be produced through the appropriate A MIB conforming to the SMIv1 can be produced through the appropriate
translations. The resulting translated MIB must be semantically translations. The resulting translated MIB must be semantically
equivalent, except where objects or events are omitted because no equivalent, except where objects or events are omitted because no
translation is possible (e.g., use of Counter64). Some machine translation is possible (e.g., use of Counter64). Some machine
readable information in SMIv2 will be converted into textual readable information in SMIv2 will be converted into textual
descriptions in SMIv1 during the translation process. However, this descriptions in SMIv1 during the translation process. However, this
loss of machine readable information is not considered to change the loss of machine readable information is not considered to change the
semantics of the MIB. semantics of the MIB.
4. Change Log 4. Change Log
This section tracks changes made to the revisions of the Internet This section tracks changes made to the revisions of the Internet
Drafts of this document. It will be deleted when the document is Drafts of this document. It will be deleted when the document is
published as an RFC. published as an RFC.
The following changes were made for the version of the document dated The following changes were made for the version of the document dated
June 24, 1999. October 20, 1999.
- Deleted orginal section 4 and replace it with the change log. - Changed adslLineExtTable to include config ATU-C, ATU-C and
- Corrected Reference section to include the right RFCs. ATU-R actual transmission capabilities.
- Deleted portions of the Abstract section so there is no - renamed adslProfileLineMode to adslProfileLineType to match
overlapping rfc2662 adslLineType object.
between this section and the Introduction section. - Added two objects in the adslLineExtTable: one for
- Rename adslExtConfProfileLineMode to adslConfProfileLineMode adslLineModeConfig and adslLineModeActual.
- Added the adslAtucAlarmConfExtTable which contains the - Added a new textual convention for ADSL line mode.
following - Corrected the MIB compiled errors and typos.
objects:
adslAtucThreshold15MinFailedFastR
adslAtucThreshold15MinSesL
adslAtucThreshold15MinUasL
- Added 3 traps:
adslAtucFailedFastRThresholdTrap
adslAtucSesLThresholdTrap
adslAtucUasLThresholdTrap
5. Introduction 5. Introduction
The purpose of this memo is to define a supplemental set of The purpose of this memo is to define a supplemental set of
managed objects that is not covered by ADSL Line MIB as defined in managed objects that is not covered by ADSL Line MIB as defined in
[10]. This memo addresses the additional objects defined in ITU [10]. This memo addresses the additional objects defined in ITU
G.997.1 [8]. These additional objects specifically address the G.997.1 [8]. These additional objects specifically address the
management capabilities of ADSL "Lite" as defined by ITU-T G.992.2 management capabilities of ADSL "Lite" as defined by ITU-T G.992.2
[9]. [9].
skipping to change at page 5, line 38 skipping to change at page 5, line 29
8. Conformance and Compliance 8. Conformance and Compliance
See the conformance and compliance statements within the information See the conformance and compliance statements within the information
module. module.
9. Definitions 9. Definitions
ADSL2-LINE-MIB DEFINITIONS ::= BEGIN ADSL2-LINE-MIB DEFINITIONS ::= BEGIN
IMPORTS IMPORTS
BITS, Counter32,
Unsigned32,
NOTIFICATION-TYPE,
MODULE-IDENTITY, Gauge32, MODULE-IDENTITY, Gauge32,
OBJECT-TYPE, mib-2 FROM SNMPv2-SMI OBJECT-TYPE, mib-2 FROM SNMPv2-SMI
MODULE-COMPLIANCE, OBJECT-GROUP,
NOTIFICATION-GROUP FROM SNMPv2-CONF
TEXTUAL-CONVENTION FROM SNMPv2-TC TEXTUAL-CONVENTION FROM SNMPv2-TC
PerfCurrentCount,
PerfIntervalCount FROM PerfHist-TC-MIB
AdslPerfCurrDayCount,
AdslPerfPrevDayCount,
AdslPerfTimeElapsed,
AdslLineCodingType FROM ADSL-TC-MIB
adslLineEntry,
adslAtucPerfDataEntry,
adslLineConfProfileEntry,
adslLineAlarmConfProfileEntry,
adslAturPerfDataEntry,
adslMIB FROM ADSL-LINE-MIB adslMIB FROM ADSL-LINE-MIB
; ;
adsl2MIB MODULE-IDENTITY adsl2MIB MODULE-IDENTITY
LAST-UPDATED "9905141200Z" LAST-UPDATED "9905141200Z"
ORGANIZATION "IETF ADSL MIB Working Group" ORGANIZATION "IETF ADSL MIB Working Group"
CONTACT-INFO CONTACT-INFO
" "
Gregory Bathrick
AG Communication Systems
A Subsidiary of Lucent Technologies
2500 W Utopia Rd.
Phoenix, AZ 85027 USA
Tel: +1 602-582-7679
Fax: +1 602-582-7697
E-mail: bathricg@agcs.com
Faye Ly Faye Ly
Copper Mountain Networks Copper Mountain Networks
Norcal Office Norcal Office
2470 Embarcadero Way 2470 Embarcadero Way
Palo Alto, CA 94303 Palo Alto, CA 94303
Tel: +1 650-687-3323 Tel: +1 650-687-3323
E-Mail: faye@coppermountain.com E-Mail: faye@coppermountain.com
Gregory Bathrick
AG Communication Systems
A Subsidiary of Lucent Technologies
2500 W Utopia Rd.
Phoenix, AZ 85027 USA
Tel: +1 602-582-7679
Fax: +1 602-582-7697
E-mail: bathricg@agcs.com"
DESCRIPTION DESCRIPTION
"This MIB Module is a supplement to the ADSL-LINE-MIB [1]." "This MIB Module is a supplement to the ADSL-LINE-MIB [1]."
::= { adslMIB 2 } ::= { adslMIB 3 }
adsl2MIBObjects OBJECT IDENTIFIER ::= {atm2MIB 1} adsl2MibObjects OBJECT IDENTIFIER ::= { adsl2MIB 1 }
AdslTransmissionModeType ::= TEXTUAL-CONVENTION AdslTransmissionModeType ::= TEXTUAL-CONVENTION
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This data type is used as the syntax ADSL line "This data type is used as the syntax ADSL line
transmission transmission
mode. The transmission mode is defined as: mode. The transmission mode is defined as:
Bit 01 : Regional Std. (ANSI T1.413) Bit 01 : Regional Std. (ANSI T1.413)
Bit 02 : Regional Std. (ETSI DTS/TM06006) Bit 02 : Regional Std. (ETSI DTS/TM06006)
Bit 03 : G.992.1 POTS non-overlapped Bit 03 : G.992.1 POTS non-overlapped
skipping to change at page 6, line 48 skipping to change at page 7, line 7
Bit 05 : G.992.1 ISDN non-overlapped Bit 05 : G.992.1 ISDN non-overlapped
Bit 06 : G.992.1 ISDN overlapped Bit 06 : G.992.1 ISDN overlapped
Bit 07 : G.992.1 TCM-ISDN non-overlapped Bit 07 : G.992.1 TCM-ISDN non-overlapped
Bit 08 : G.992.1 TCM-ISDN overlapped Bit 08 : G.992.1 TCM-ISDN overlapped
Bit 09 : G.992.2 POTS non-overlapped Bit 09 : G.992.2 POTS non-overlapped
Bit 10 : G.992.2 POTS overlapped Bit 10 : G.992.2 POTS overlapped
Bit 11 : G.992.2 with TCM-ISDN non-overlapped Bit 11 : G.992.2 with TCM-ISDN non-overlapped
Bit 12 : G.992.2 with TCM-ISDN overlapped Bit 12 : G.992.2 with TCM-ISDN overlapped
" "
SYNTAX BITS { SYNTAX BITS {
ansit1413(1), ansit1413(0),
etsi(2), etsi(1),
9921potsnon-overlapped(3), a9921potsNonoverlapped(2),
9921potsoverlapped(4), a9921potsoverlapped(3),
9921isdnnon-overlapped(5), a9921isdnnonoverlapped(4),
9921isdnoverlapped(6), a9921isdnoverlapped(5),
9921tcm-isdnnon-overlapped(7), a9921tcmIsdnNonoverlapped(6),
9921tcm-isdn-overlapped(8), a9921tcmIsdnOverlapped(7),
9922potsnon-overlapeed(9), a9922potsnonOverlapeed(8),
9922potsoverlapped(10), a9922potsOverlapped(9),
9922tcm-isdnnon-overlapped(11), a9922tcmIsdnNonOverlapped(10),
9922tcm-isdn-overlapped(12) a9922tcmIsdnOverlapped(11)
} }
adslLineExtTable OBJECT-TYPE adslLineExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF AdslExtLineEntry SYNTAX SEQUENCE OF AdslLineExtEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table contains ADSL line configuration and "This table contains ADSL line configuration and
monitoring monitoring
information not defined in the adslLineTable from information not defined in the adslLineTable from
the the
ADSL-LINE-MIB [1]. This includes the capabilities ADSL-LINE-MIB [1]. This includes the capabilities
and and
actual ADSL transmission system." actual ADSL transmission system."
::= { adslMibObjects 17 } ::= { adsl2MibObjects 17 }
adslExtLineEntry OBJECT-TYPE adslLineExtEntry OBJECT-TYPE
SYNTAX AdslExtLineEntry SYNTAX AdslLineExtEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry extends the adslLineEntry defined in [1]. "An entry extends the adslLineEntry defined in [1].
Each Each
entry corresponds to an ADSL line." entry corresponds to an ADSL line."
AUGMENTS { adslLineEntry } AUGMENTS { adslLineEntry }
::= { adslLineExtTable 1 } ::= { adslLineExtTable 1 }
AdslExtLineEntry ::= AdslLineExtEntry ::=
SEQUENCE { SEQUENCE {
adslLineTransEnabled INTEGER, adslLineTransEnabled INTEGER,
adslLineTransAtucCap AdslTransmissionModeType, adslLineTransAtucCap AdslTransmissionModeType,
adslLineTransAturCap AdslTransmissionModeType, adslLineTransAtucCapActual AdslTransmissionModeType,
adslLineTransCapActual AdslTransmissionModeType adslLineTransAturCapActual AdslTransmissionModeType,
adslLineModeCap INTEGER,
adslLineModeActual INTEGER
} }
adslLineTransEnabled OBJECT-TYPE adslLineTransEnabled OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
yes(1), yes(1),
no(2) no(2)
} }
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object is used to enable or disable the ADSL "This object is used to enable or disable the ADSL
Line Line
Transmission." Transmission."
::= { adslExtLineEntry 1 } ::= { adslLineExtEntry 1 }
adslLineTransAtucCap OBJECT-TYPE adslLineTransAtucCap OBJECT-TYPE
SYNTAX AdslTransmissionModeType SYNTAX AdslTransmissionModeType
MAX-ACCESS read-only MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Specifies the ATU-C Transmission system "Specifies the ATU-C Transmission system capability.
capability." This object is used to configure the ATU-C
transmission
system capability."
REFERENCE "Section 7.3.2 ITU G.997.1 [8]" REFERENCE "Section 7.3.2 ITU G.997.1 [8]"
::= { adslExtLineEntry 2 } ::= { adslLineExtEntry 2 }
adslLineTransAturCap OBJECT-TYPE adslLineTransAtucCapActual OBJECT-TYPE
SYNTAX AdslTransmissionModeType SYNTAX AdslTransmissionModeType
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Specifies the ATU-R Transmission system "Specifies the actual ATU-C Transmission system
capability." capability."
REFERENCE "Section 7.3.2 ITU G.997.1 [8]" REFERENCE "Section 7.3.2 ITU G.997.1 [8]"
::= { adslExtLineEntry 3 } ::= { adslLineExtEntry 3 }
adslLineTransCapActual OBJECT-TYPE adslLineTransAturCapActual OBJECT-TYPE
SYNTAX AdslTransmissionModeType SYNTAX AdslTransmissionModeType
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Specifies the actual Transmission system capability "Specifies the actual ATU-R Transmission system
for this capability."
ADSL line."
REFERENCE "Section 7.3.2 ITU G.997.1 [8]" REFERENCE "Section 7.3.2 ITU G.997.1 [8]"
::= { adslExtLineEntry 4 } ::= { adslLineExtEntry 4 }
adslLineModeCap OBJECT-TYPE
SYNTAX INTEGER {
glite(1), -- G.Lite only
adsl(2), -- G.DMT only
dual(3) -- provides both G.Lite
and G.DMT
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the ADSL line operation mode. If the
value
of the object is dual(3), this line is capable of
running
both ADSL (G.DMT) and G.Lite."
::= { adslLineExtEntry 5 }
adslLineModeActual OBJECT-TYPE
SYNTAX INTEGER {
glite(1), -- G.Lite
adsl(2) -- G.DMT
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Specifies the actual ADSL line operation mode."
::= { adslLineExtEntry 6 }
adslAtucPerfDataExtTable OBJECT-TYPE adslAtucPerfDataExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF AdslAtucPerfDataExtEntry SYNTAX SEQUENCE OF AdslAtucPerfDataExtEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table contains ADSL physical line counters "This table contains ADSL physical line counters
information not defined in the adslAtucPerfDataTable from the ADSL- information not defined in the adslAtucPerfDataTable from the ADSL-
LINE-MIB [10]." LINE-MIB [10]."
::= { adslMibObjects 18 } ::= { adsl2MibObjects 18 }
adslAtucPerfDataExtEntry OBJECT-TYPE adslAtucPerfDataExtEntry OBJECT-TYPE
SYNTAX AdslAtucPerfDataExtEntry SYNTAX AdslAtucPerfDataExtEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry extends the adslAtucPerfDataEntry defined "An entry extends the adslAtucPerfDataEntry defined
in [10]. Each entry corresponds to an ADSL line." in [10]. Each entry corresponds to an ADSL line."
AUGMENTS { adslAtucPerfDataEntry } AUGMENTS { adslAtucPerfDataEntry }
::= { adslAtucPerfDataTable 1 } ::= { adslAtucPerfDataExtTable 1 }
AdslAtucPerfDataExtEntry ::=
AdslAtucPerfDataEntry ::=
SEQUENCE { SEQUENCE {
adslAtucPerfStatFastR Counter32, adslAtucPerfStatFastR Counter32,
adslAtucPerfStatFailedFastR Counter32, adslAtucPerfStatFailedFastR Counter32,
adslAtucPerfStatSesL Counter32, adslAtucPerfStatSesL Counter32,
adslAtucPerfStatUasL Counter32, adslAtucPerfStatUasL Counter32,
adslAtucPerfCurr15FastR PerfCurrentCount, adslAtucPerfCurr15FastR PerfCurrentCount,
adslAtucPerfCurr15FailedFastR PerfCurrentCount, adslAtucPerfCurr15FailedFastR PerfCurrentCount,
adslAtucPerfCurr15MinSesL PerfCurrentCount, adslAtucPerfCurr15MinSesL PerfCurrentCount,
adslAtucPerfCurr15MinUasL PerfCurrentCount, adslAtucPerfCurr15MinUasL PerfCurrentCount,
adslAtucPerfCurr1DayFastR AdslPerfCurrDayCount, adslAtucPerfCurr1DayFastR AdslPerfCurrDayCount,
adslAtucPerfCurr1DayFailedFastR AdslPerfCurrDayCount, adslAtucPerfCurr1DayFailedFastR AdslPerfCurrDayCount,
adslAtucPerfCurr1DaySesL AdslPerfCurrDayCount, adslAtucPerfCurr1DaySesL AdslPerfCurrDayCount,
adslAtucPerfCurr1DayUasL AdslPerfCurrDayCount, adslAtucPerfCurr1DayUasL AdslPerfCurrDayCount,
adslAtucPerfPrev1DayFastR AdslPerfPrevDayCount, adslAtucPerfPrev1DayFastR AdslPerfPrevDayCount,
adslAtucPerfPrev1DayFailedFastR AdslPerfPrevDayCount adslAtucPerfPrev1DayFailedFastR AdslPerfPrevDayCount,
adslAtucPerfPrev1DaySesL AdslPerfPrevDayCount, adslAtucPerfPrev1DaySesL AdslPerfPrevDayCount,
adslAtucPerfPrev1DayUasL AdslPerfPrevDayCount adslAtucPerfPrev1DayUasL AdslPerfPrevDayCount
} }
adslAtucPerfStatFastR OBJECT-TYPE adslAtucPerfStatFastR OBJECT-TYPE
SYNTAX Counter SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The value of this object indicates the count of "The value of this object indicates the count of
fast retrains." fast retrains."
REFERENCE "ITU G.997.1 Section 7.4.15.1 [8]" REFERENCE "ITU G.997.1 Section 7.4.15.1 [8]"
::= { adslAtucPerfDataEntry 1 } ::= { adslAtucPerfDataExtEntry 1 }
adslLineStatFailedFRetrains OBJECT-TYPE adslAtucPerfStatFailedFastR OBJECT-TYPE
SYNTAX Counter SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The value of this object indicates the count of "The value of this object indicates the count of
failed fast retrains." failed fast retrains."
REFERENCE "ITU G.997.1 Section 7.4.15.2 [8]" REFERENCE "ITU G.997.1 Section 7.4.15.2 [8]"
::= { adslAtucPerfDataEntry 2 } ::= { adslAtucPerfDataExtEntry 2 }
adslAtucPerfStatSesL OBJECT-TYPE adslAtucPerfStatSesL OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The value of this object indicates the count of "The value of this object indicates the count of
severely errored second-line." severely errored second-line."
REFERENCE "ITU G.997.1 Section 7.2.1.1.7 [8]" REFERENCE "ITU G.997.1 Section 7.2.1.1.7 [8]"
::= { adslAtucPerfDataEntry 3 } ::= { adslAtucPerfDataExtEntry 3 }
adslAtucPerfStatUasL OBJECT-TYPE adslAtucPerfStatUasL OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The value of this object indicates the count of "The value of this object indicates the count of
unavailable second." unavailable second."
REFERENCE "ITU G.997.1 Section 7.2.1.1.9 [8]" REFERENCE "ITU G.997.1 Section 7.2.1.1.9 [8]"
::= { adslAtucPerfDataEntry 4 } ::= { adslAtucPerfDataExtEntry 4 }
adslAtucPerfCurr15MinFastR OBJECT-TYPE adslAtucPerfCurr15FastR OBJECT-TYPE
SYNTAX PerfCurrentCount SYNTAX PerfCurrentCount
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Count of seconds in the current 15 minute interval "Count of seconds in the current 15 minute interval
when there was fast retrains." when there was fast retrains."
REFERENCE "ITU G.997.1 Section 7.4.15.1 [8]" REFERENCE "ITU G.997.1 Section 7.4.15.1 [8]"
::= { adslAtucPerfDataEntry 5 } ::= { adslAtucPerfDataExtEntry 5 }
adslAtucPerfCurr15MinFailedFastR OBJECT-TYPE adslAtucPerfCurr15FailedFastR OBJECT-TYPE
SYNTAX PerfCurrentCount SYNTAX PerfCurrentCount
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Count of seconds in the current 15 minute interval "Count of seconds in the current 15 minute interval
when there was failed fast retrains." when there was failed fast retrains."
REFERENCE "ITU G.997.1 Section 7.4.15.2 [8]" REFERENCE "ITU G.997.1 Section 7.4.15.2 [8]"
::= { adslAtucPerfDataEntry 6 } ::= { adslAtucPerfDataExtEntry 6 }
adslAtucPerfCurr15MinSesL OBJECT-TYPE adslAtucPerfCurr15MinSesL OBJECT-TYPE
SYNTAX PerfCurrentCount SYNTAX PerfCurrentCount
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Count of seconds in the current 15 minute interval "Count of seconds in the current 15 minute interval
when there was fast retrains." when there was fast retrains."
REFERENCE "ITU G.997.1 Section 7.2.1.1.7 [8]" REFERENCE "ITU G.997.1 Section 7.2.1.1.7 [8]"
::= { adslAtucPerfDataEntry 7 } ::= { adslAtucPerfDataExtEntry 7 }
adslAtucPerfCurr15MinUasL OBJECT-TYPE adslAtucPerfCurr15MinUasL OBJECT-TYPE
SYNTAX PerfCurrentCount SYNTAX PerfCurrentCount
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Count of seconds in the current 15 minute interval "Count of seconds in the current 15 minute interval
when there was count for unavailable errored when there was count for unavailable errored
seconds." seconds."
REFERENCE "ITU G.997.1 Section 7.2.1.1.9 [8]" REFERENCE "ITU G.997.1 Section 7.2.1.1.9 [8]"
::= { adslAtucPerfDataEntry 8 } ::= { adslAtucPerfDataExtEntry 8 }
adslAtucPerfCurr1DayFastR OBJECT-TYPE adslAtucPerfCurr1DayFastR OBJECT-TYPE
SYNTAX AdslPerfCurrDayCount SYNTAX AdslPerfCurrDayCount
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Count of the number of seconds when there was fast "Count of the number of seconds when there was fast
retrains during the current day as measured by retrains during the current day as measured by
adslAtucPerfCurr1DayTimeElapsed." adslAtucPerfCurr1DayTimeElapsed."
REFERENCE "ITU G.997.1 Section 7.4.15.1 [8]" REFERENCE "ITU G.997.1 Section 7.4.15.1 [8]"
::= { adslAtucPerfDataEntry 9 } ::= { adslAtucPerfDataExtEntry 9 }
adslAtucPerfCurr1DayFailedFastR OBJECT-TYPE adslAtucPerfCurr1DayFailedFastR OBJECT-TYPE
SYNTAX AdslPerfCurrDayCount SYNTAX AdslPerfCurrDayCount
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Count of the number of seconds when there was "Count of the number of seconds when there was
failed failed
fast retrains during the current day as measured by fast retrains during the current day as measured by
adslAtucPerfCurr1DayTimeElapsed."
REFERENCE "ITU G.997.1 Section 7.4.15.2 [8]" REFERENCE "ITU G.997.1 Section 7.4.15.2 [8]"
::= { adslAtucPerfDataEntry 10 } ::= { adslAtucPerfDataExtEntry 10 }
adslAtucPerfCurr1DaySesL OBJECT-TYPE adslAtucPerfCurr1DaySesL OBJECT-TYPE
SYNTAX AdslPerfCurrDayCount SYNTAX AdslPerfCurrDayCount
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Count of the number of seconds when there was "Count of the number of seconds when there was
Severed Severed
Errored Seconds during the current day as measured Errored Seconds during the current day as measured
by by
adslAtucPerfCurr1DayTimeElapsed." adslAtucPerfCurr1DayTimeElapsed."
REFERENCE "ITU G.997.1 Section 7.2.1.1.7 [8]" REFERENCE "ITU G.997.1 Section 7.2.1.1.7 [8]"
::= { adslAtucPerfDataEntry 11 } ::= { adslAtucPerfDataExtEntry 11 }
adslAtucPerfCurr1DayUasL OBJECT-TYPE adslAtucPerfCurr1DayUasL OBJECT-TYPE
SYNTAX AdslPerfCurrDayCount SYNTAX AdslPerfCurrDayCount
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Count of the number of seconds when there was "Count of the number of seconds when there was
Unavailable Unavailable
Errored Seconds during the current day as measured Errored Seconds during the current day as measured
by by
adslAtucPerfCurr1DayTimeElapsed." adslAtucPerfCurr1DayTimeElapsed."
REFERENCE "ITU G.997.1 Section 7.2.1.1.9 [8]" REFERENCE "ITU G.997.1 Section 7.2.1.1.9 [8]"
::= { adslAtucPerfDataEntry 12 } ::= { adslAtucPerfDataExtEntry 12 }
adslAtucPerfPrev1DayFastR OBJECT-TYPE adslAtucPerfPrev1DayFastR OBJECT-TYPE
SYNTAX AdslPerfPrevDayCount SYNTAX AdslPerfPrevDayCount
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Count of seconds in the interval when there was "Count of seconds in the interval when there was
fast retrains within the most recent previous fast retrains within the most recent previous
1-day period." 1-day period."
REFERENCE "ITU G.997.1 Section 7.4.15.1 [8]" REFERENCE "ITU G.997.1 Section 7.4.15.1 [8]"
::= { adslAtucPerfDataEntry 13 } ::= { adslAtucPerfDataExtEntry 13 }
adslAtucPerfPrev1DayFailedFastR OBJECT-TYPE adslAtucPerfPrev1DayFailedFastR OBJECT-TYPE
SYNTAX AdslPerfPrevDayCount SYNTAX AdslPerfPrevDayCount
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Count of seconds in the interval when there was "Count of seconds in the interval when there was
failed fast retrains within the most recent previous failed fast retrains within the most recent previous
1-day period." 1-day period."
REFERENCE "ITU G.997.1 Section 7.4.15.2 [8]" REFERENCE "ITU G.997.1 Section 7.4.15.2 [8]"
::= { adslAtucPerfDataEntry 14 } ::= { adslAtucPerfDataExtEntry 14 }
adslAtucPerfPrev1DaySesL OBJECT-TYPE adslAtucPerfPrev1DaySesL OBJECT-TYPE
SYNTAX AdslPerfPrevDayCount SYNTAX AdslPerfPrevDayCount
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Count of seconds in the interval when there was "Count of seconds in the interval when there was
severed errored seconds within the most recent severed errored seconds within the most recent
previous previous
1-day period." 1-day period."
REFERENCE "ITU G.997.1 Section 7.2.1.1.7 [8]" REFERENCE "ITU G.997.1 Section 7.2.1.1.7 [8]"
::= { adslAtucPerfDataEntry 15 } ::= { adslAtucPerfDataExtEntry 15 }
adslAtucPerfPrev1DayFailedUasL OBJECT-TYPE adslAtucPerfPrev1DayUasL OBJECT-TYPE
SYNTAX AdslPerfPrevDayCount SYNTAX AdslPerfPrevDayCount
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Count of seconds in the interval when there was "Count of seconds in the interval when there was
unavailable errored seconds within the most recent unavailable errored seconds within the most recent
previous previous
1-day period." 1-day period."
REFERENCE "ITU G.997.1 Section 7.2.1.1.9 [8]" REFERENCE "ITU G.997.1 Section 7.2.1.1.9 [8]"
::= { adslAtucPerfDataEntry 16 } ::= { adslAtucPerfDataExtEntry 16 }
adslAturPerfDataExtTable OBJECT-TYPE adslAturPerfDataExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF AdslAturPerfDataExtEntry SYNTAX SEQUENCE OF AdslAturPerfDataExtEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table contains ADSL physical line counters "This table contains ADSL physical line counters
information not defined in the adslAturPerfDataTable from the ADSL- information not defined in the adslAturPerfDataTable from the ADSL-
LINE-MIB [10]." LINE-MIB [10]."
::= { adslMibObjects 19 } ::= { adsl2MibObjects 19 }
adslAturPerfDataExtEntry OBJECT-TYPE adslAturPerfDataExtEntry OBJECT-TYPE
SYNTAX AdslAturPerfDataExtEntry SYNTAX AdslAturPerfDataExtEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry extends the adslAturPerfDataEntry defined "An entry extends the adslAturPerfDataEntry defined
in [10]. Each entry corresponds to an ADSL line." in [10]. Each entry corresponds to an ADSL line."
AUGMENTS { adslAturPerfDataEntry } AUGMENTS { adslAturPerfDataEntry }
::= { adslAturPerfDataTable 1 } ::= { adslAturPerfDataExtTable 1 }
AdslAturPerfDataEntry ::= AdslAturPerfDataExtEntry ::=
SEQUENCE { SEQUENCE {
adslAturPerfStatSesL Counter32, adslAturPerfStatSesL Counter32,
adslAturPerfStatUasL Counter32, adslAturPerfStatUasL Counter32,
adslAturPerfCurr15MinSesL PerfCurrentCount, adslAturPerfCurr15MinSesL PerfCurrentCount,
adslAturPerfCurr15MinUasL PerfCurrentCount, adslAturPerfCurr15MinUasL PerfCurrentCount,
adslAturPerfCurr1DaySesL AdslPerfCurrDayCount, adslAturPerfCurr1DaySesL AdslPerfCurrDayCount,
adslAturPerfCurr1DayUasL AdslPerfCurrDayCount, adslAturPerfCurr1DayUasL AdslPerfCurrDayCount,
adslAturPerfPrev1DaySesL AdslPerfPrevDayCount, adslAturPerfPrev1DaySesL AdslPerfPrevDayCount,
adslAturPerfPrev1DayUasL AdslPerfPrevDayCount adslAturPerfPrev1DayUasL AdslPerfPrevDayCount
} }
adslAturPerfStatSesL OBJECT-TYPE adslAturPerfStatSesL OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The value of this object indicates the count of "The value of this object indicates the count of
severely errored second-line." severely errored second-line."
REFERENCE "ITU G.997.1 Section 7.2.1.1.7 [8]" REFERENCE "ITU G.997.1 Section 7.2.1.1.7 [8]"
::= { adslAturPerfDataEntry 1 } ::= { adslAturPerfDataExtEntry 1 }
adslAturPerfStatUasL OBJECT-TYPE adslAturPerfStatUasL OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The value of this object indicates the count of "The value of this object indicates the count of
unavailable second." unavailable second."
REFERENCE "ITU G.997.1 Section 7.2.1.2.9 [8]" REFERENCE "ITU G.997.1 Section 7.2.1.2.9 [8]"
::= { adslAturPerfDataEntry 2 } ::= { adslAturPerfDataExtEntry 2 }
adslAturPerfCurr15MinSesL OBJECT-TYPE adslAturPerfCurr15MinSesL OBJECT-TYPE
SYNTAX PerfCurrentCount SYNTAX PerfCurrentCount
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Count of seconds in the current 15 minute interval "Count of seconds in the current 15 minute interval
when there was Severed Errored Seconds-Line." when there was Severed Errored Seconds-Line."
REFERENCE "ITU G.997.1 Section 7.2.1.2.7 [8]" REFERENCE "ITU G.997.1 Section 7.2.1.2.7 [8]"
::= { adslAturPerfDataEntry 3 } ::= { adslAturPerfDataExtEntry 3 }
adslAturPerfCurr15MinUasL OBJECT-TYPE adslAturPerfCurr15MinUasL OBJECT-TYPE
SYNTAX PerfCurrentCount SYNTAX PerfCurrentCount
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Count of seconds in the current 15 minute interval "Count of seconds in the current 15 minute interval
when there was Unavailable Errored Seconds." when there was Unavailable Errored Seconds."
REFERENCE "ITU G.997.1 Section 7.2.1.2.9 [8]" REFERENCE "ITU G.997.1 Section 7.2.1.2.9 [8]"
::= { adslAturPerfDataEntry 4 } ::= { adslAturPerfDataExtEntry 4 }
adslAturPerfCurr1DaySesL OBJECT-TYPE adslAturPerfCurr1DaySesL OBJECT-TYPE
SYNTAX AdslPerfCurrDayCount SYNTAX AdslPerfCurrDayCount
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Count of the number of seconds when there was "Count of the number of seconds when there was
Severed Severed
Errored Seconds during the current day as measured Errored Seconds during the current day as measured
by by
adslAturPerfCurr1DayTimeElapsed." adslAturPerfCurr1DayTimeElapsed."
REFERENCE "ITU G.997.1 Section 7.2.1.2.7 [8]" REFERENCE "ITU G.997.1 Section 7.2.1.2.7 [8]"
::= { adslAturPerfDataEntry 5 } ::= { adslAturPerfDataExtEntry 5 }
adslAturPerfCurr1DayUasL OBJECT-TYPE adslAturPerfCurr1DayUasL OBJECT-TYPE
SYNTAX AdslPerfCurrDayCount SYNTAX AdslPerfCurrDayCount
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Count of the number of seconds when there was "Count of the number of seconds when there was
Unavailable Unavailable
Errored Seconds during the current day as measured Errored Seconds during the current day as measured
by by
adslAturPerfCurr1DayTimeElapsed." adslAturPerfCurr1DayTimeElapsed."
REFERENCE "ITU G.997.1 Section 7.2.1.2.9 [8]" REFERENCE "ITU G.997.1 Section 7.2.1.2.9 [8]"
::= { adslAturPerfDataEntry 6 } ::= { adslAturPerfDataExtEntry 6 }
adslAturPerfPrev1DaySesL OBJECT-TYPE adslAturPerfPrev1DaySesL OBJECT-TYPE
SYNTAX AdslPerfPrevDayCount SYNTAX AdslPerfPrevDayCount
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Count of seconds in the interval when there was "Count of seconds in the interval when there was
severed errored second within the most recent severed errored second within the most recent
previous previous
1-day period." 1-day period."
REFERENCE "ITU G.997.1 Section 7.2.1.2.7 [8]" REFERENCE "ITU G.997.1 Section 7.2.1.2.7 [8]"
::= { adslAturPerfDataEntry 7 } ::= { adslAturPerfDataExtEntry 7 }
adslAturPerfPrev1DayUasL OBJECT-TYPE adslAturPerfPrev1DayUasL OBJECT-TYPE
SYNTAX AdslPerfPrevDayCount SYNTAX AdslPerfPrevDayCount
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Count of seconds in the interval when there was "Count of seconds in the interval when there was
unvailable errored second within the most recent unvailable errored second within the most recent
previous previous
1-day period." 1-day period."
REFERENCE "ITU G.997.1 Section 7.2.1.2.9 [8]" REFERENCE "ITU G.997.1 Section 7.2.1.2.9 [8]"
::= { adslAturPerfDataEntry 8 } ::= { adslAturPerfDataExtEntry 8 }
adslExtConfProfileTable OBJECT-TYPE adslConfProfileExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF AdslExtConfProfileEntry SYNTAX SEQUENCE OF AdslConfProfileExtEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table contains ADSL line profile configuration "This table contains ADSL line profile configuration
information not defined in the information not defined in the
adslLineConfProfileTable adslLineConfProfileTable
from the ADSL-LINE-MIB [1]. This includes the line from the ADSL-LINE-MIB [1]. This includes the line
mode." mode."
::= { adslMibObjects 20 } ::= { adsl2MibObjects 20 }
adslExtConfPrifleEntry OBJECT-TYPE adslConfProfileExtEntry OBJECT-TYPE
SYNTAX AdslExtConfProfileEntry SYNTAX AdslConfProfileExtEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry extends the adslLineConfPrifileEntry "An entry extends the adslLineConfProfileEntry
defined in [1]. defined in [1].
Each entry corresponds to an ADSL line profile." Each entry corresponds to an ADSL line profile."
AUGMENTS { adslLineConfProfileEntry } AUGMENTS { adslLineConfProfileEntry }
::= { adslExtConfProfileTable 1 } ::= { adslConfProfileExtTable 1 }
AdslExtConfProfileEntry ::= AdslConfProfileExtEntry ::=
SEQUENCE { SEQUENCE {
adslConfPorifileLineMode INTEGER adslConfProfileLineMode INTEGER
} }
adslConfProfileLineMode OBJECT-TYPE adslConfProfileLineType OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
noChannel (1), -- no channels exist noChannel (1), -- no channels exist
fastOnly (2), -- fast channel exists only fastOnly (2), -- fast channel exists only
interleavedOnly (3), -- interleaved channel exists interleavedOnly (3), -- interleaved channel exists
-- only -- only
fastOrInterleaved (4),-- either fast or interleaved fastOrInterleaved (4),-- either fast or interleaved
-- channels can exist, but -- channels can exist, but
-- only one at any time -- only one at any time
fastAndInterleaved (5)-- both fast or interleaved fastAndInterleaved (5)-- both fast or interleaved
-- channels exist -- channels exist
} }
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" "
This object is used to configure the ADSL physical This object is used to configure the ADSL physical
line line
mode. " mode. "
::= { adslExtConfProfileEntry 1 } ::= { adslConfProfileExtEntry 1 }
adslLineAlarmConfProExtTable OBJECT-TYPE adslAlarmConfProfileExtTable OBJECT-TYPE
SYNTAX SEQUENCE OF AdslLineAlarmConfProExtEntry SYNTAX SEQUENCE OF AdslAlarmConfProfileExtEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table extends the "This table extends the
adslLineAlarmConfProfileTable and adslLineAlarmConfProfileTable and
provides threshold parameters for all the counters provides threshold parameters for all the counters
defined defined
in this MIB module." in this MIB module."
::= { adslMibObjects 21 } ::= { adsl2MibObjects 21 }
adslLineAlarmConfProfExtEntry OBJECT-TYPE adslAlarmConfProfileExtEntry OBJECT-TYPE
SYNTAX AdslLineAlarmConfProfExtEntry SYNTAX AdslAlarmConfProfileExtEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry extends the adslLineAlarmConfProfileTable "An entry extends the adslLineAlarmConfProfileTable
defined in [10]. Each entry corresponds to an ADSL alarm profile." defined in [10]. Each entry corresponds to an ADSL alarm profile."
AUGMENTS { adslLineAlarmConfProfileEntry } AUGMENTS { adslLineAlarmConfProfileEntry }
::= { adslLineAlarmConfProfTable 1 } ::= { adslAlarmConfProfileExtTable 1 }
AdslLineAlarmConfProfExtEntry ::= AdslAlarmConfProfileExtEntry ::=
SEQUENCE { SEQUENCE {
adslAtucThreshold15MinFailedFastR Unsigned32, adslAtucThreshold15MinFailedFastR Unsigned32,
adslAtucThreshold15MinSesL Unsigned32, adslAtucThreshold15MinSesL Unsigned32,
adslAtucThreshold15MinUasL Unsigned32 adslAtucThreshold15MinUasL Unsigned32
} }
adslAtucThreshold15MinFailedFastR OBJECT-TYPE adslAtucThreshold15MinFailedFastR OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of failed retrains encountered by an "The number of failed retrains encountered by an
ADSL interface withing any givin 15 minutes ADSL interface withing any givin 15 minutes
performance performance
data collection period, which cause the SNMP agent data collection period, which cause the SNMP agent
to send an adslAtucFailedFastRTrap. One trap will to send an adslAtucFailedFastRTrap. One trap will
be be
sent per interval per interface. A value '0' will sent per interval per interface. A value '0' will
disable the trap." disable the trap."
::= { adslLineAlarmConfProfExtEntry 1 } ::= { adslAlarmConfProfileExtEntry 1 }
adslAtucThreshold15MinSesL OBJECT-TYPE adslAtucThreshold15MinSesL OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of Severed errored seconds encountered "The number of Severed errored seconds encountered
by an by an
ADSL interface withing any givin 15 minutes ADSL interface withing any givin 15 minutes
performance performance
data collection period, which cause the SNMP agent data collection period, which cause the SNMP agent
to send an adslAtucSesLTrap. One trap will be to send an adslAtucSesLTrap. One trap will be
sent per interval per interface. A value '0' will sent per interval per interface. A value '0' will
disable the trap." disable the trap."
::= { adslLineAlarmConfProfExtEntry 2 } ::= { adslAlarmConfProfileExtEntry 2 }
adslAtucThreshold15MinUasL OBJECT-TYPE adslAtucThreshold15MinUasL OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of unavailable errored seconds "The number of unavailable errored seconds
encountered by an encountered by an
ADSL interface withing any givin 15 minutes ADSL interface withing any givin 15 minutes
performance performance
data collection period, which cause the SNMP agent data collection period, which cause the SNMP agent
to send an adslAtucFailedFastRTrap. One trap will to send an adslAtucFailedFastRTrap. One trap will
be be
sent per interval per interface. A value '0' will sent per interval per interface. A value '0' will
disable the trap." disable the trap."
::= { adslLineAlarmConfProfExtEntry 3 } ::= { adslAlarmConfProfileExtEntry 3 }
-- trap definitions -- trap definitions
adsl2Traps OBJECT IDENTIFIER ::= { adslMibObjects 22 } adsl2Traps OBJECT IDENTIFIER ::= { adsl2MibObjects 22 }
adsl2AtucTraps OBJECT IDENTIFIER ::= { adsl2Traps 1 } adsl2AtucTraps OBJECT IDENTIFIER ::= { adsl2Traps 1 }
adslAtucFailedFastRThreshTrap NOTIFICATION-TYPE adslAtucFailedFastRThreshTrap NOTIFICATION-TYPE
OBJECTS { adslAtucPerfCurr15FailedFastR } OBJECTS { adslAtucPerfCurr15FailedFastR }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Failed Fast Retrains 15 minutes threshold reached." "Failed Fast Retrains 15 minutes threshold reached."
::= { adslAtucTraps 0 1 } ::= { adsl2AtucTraps 0 1 }
adslAtucSesLThreshTrap NOTIFICATION-TYPE adslAtucSesLThreshTrap NOTIFICATION-TYPE
OBJECTS { adslAtucPerfCurr15MinSesL } OBJECTS { adslAtucPerfCurr15MinSesL }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Severed errored seconds 15 minutes threshold "Severed errored seconds 15 minutes threshold
reached." reached."
::= { adslAtucTraps 0 2 } ::= { adsl2AtucTraps 0 2 }
adslAtucUasLThreshTrap NOTIFICATION-TYPE adslAtucUasLThreshTrap NOTIFICATION-TYPE
OBJECTS { adslAtucPerfCurr15MinUasL } OBJECTS { adslAtucPerfCurr15MinUasL }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Unavailable seconds 15 minutes threshold reached." "Unavailable seconds 15 minutes threshold reached."
::= { adslAtucTraps 0 3 } ::= { adsl2AtucTraps 0 3 }
-- conformance information -- conformance information
adsl2Conformance OBJECT IDENTIFIER ::= { adslLineMib 5 } adsl2Conformance OBJECT IDENTIFIER ::= { adsl2MIB 2 }
adsl2Groups OBJECT IDENTIFIER ::= { adsl2Conformance 1 } adsl2Groups OBJECT IDENTIFIER ::= { adsl2Conformance 1 }
adsl2Compliances OBJECT IDENTIFIER ::= { adsl2Conformance 2 } adsl2Compliances OBJECT IDENTIFIER ::= { adsl2Conformance 2 }
-- ATU-C agent compliance statements -- ATU-C agent compliance statements
adsl2LineMibAtucCompliance MODULE-COMPLIANCE adsl2LineMibAtucCompliance MODULE-COMPLIANCE
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The compliance statement for SNMP entities which "The compliance statement for SNMP entities which
manage ADSL ATU-C interfaces." manage ADSL ATU-C interfaces."
MODULE -- this module MODULE -- this module
MANDATORY-GROUPS MANDATORY-GROUPS
{ {
adsl2LineGroup, adsl2LineGroup,
adsl2AtucPhysPerfRawCounterGroup,
adsl2AturPhysPerfRawCounterGroup,
adsl2LineConfProfileControlGroup, adsl2LineConfProfileControlGroup,
adsl2LineAlarmConfProfileGroup adsl2LineAlarmConfProfileGroup
} }
GROUP adsl2AtucPhysPerfRawCounterGroup GROUP adsl2AtucPhysPerfRawCounterGroup
DESCRIPTION DESCRIPTION
"This group is optional. Implementations which "This group is optional. Implementations which
require continuous ATU-C physical event counters require continuous ATU-C physical event counters
should implement this group." should implement this group."
GROUP adsl2AturPhysPerfRawCounterGroup GROUP adsl2AturPhysPerfRawCounterGroup
DESCRIPTION DESCRIPTION
"This group is optional. Implementations which "This group is optional. Implementations which
require continuous ATU-R physical event counters require continuous ATU-R physical event counters
skipping to change at page 20, line 34 skipping to change at page 21, line 24
DESCRIPTION DESCRIPTION
"Read-write access is applicable when "Read-write access is applicable when
static profiles are implemented." static profiles are implemented."
OBJECT adslAtucThreshold15MinUasL OBJECT adslAtucThreshold15MinUasL
MIN-ACCESS read-write MIN-ACCESS read-write
DESCRIPTION DESCRIPTION
"Read-write access is applicable when "Read-write access is applicable when
static profiles are implemented." static profiles are implemented."
::= { adsl2Compliances 1 }
-- units of conformance
adsl2LineGroup OBJECT-GROUP adsl2LineGroup OBJECT-GROUP
OBJECTS { OBJECTS {
adslLineTransEnabled, adslLineTransEnabled,
adslLineTransAtucCap, adslLineTransAturCap, adslLineTransAtucCap,
adslLineTransCapActual adslLineTransAtucCapActual,
adslLineTransAturCapActual,
adslLineModeCap,
adslLineModeActual
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A collection of objects providing configuration "A collection of objects providing configuration
information about an ADSL Line." information about an ADSL Line."
::= { adsl2Groups 1 } ::= { adsl2Groups 1 }
adsl2AtucPhysPerfRawCounterGroup OBJECT-GROUP adsl2AtucPhysPerfRawCounterGroup OBJECT-GROUP
OBJECTS { OBJECTS {
adslAtucPerfStatFastR, adslAtucPerfStatFailedFastR, adslAtucPerfStatFastR, adslAtucPerfStatFailedFastR,
skipping to change at page 21, line 38 skipping to change at page 22, line 34
adslAturPerfPrev1DayUasL adslAturPerfPrev1DayUasL
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A collection of objects providing raw performance "A collection of objects providing raw performance
counts on an ADSL Line (ATU-C end)." counts on an ADSL Line (ATU-C end)."
::= { adsl2Groups 3 } ::= { adsl2Groups 3 }
adsl2LineConfProfileControlGroup OBJECT-GROUP adsl2LineConfProfileControlGroup OBJECT-GROUP
OBJECTS { OBJECTS {
adslConfPorifleLineMode adslConfProfileLineType
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A collection of objects providing profile "A collection of objects providing profile
control for the ADSL system." control for the ADSL system."
::= { adsl2Groups 4 } ::= { adsl2Groups 4 }
adsl2LineAlarmConfProfileGroup OBJECT-GROUP adsl2LineAlarmConfProfileGroup OBJECT-GROUP
OBJECTS { OBJECTS {
adslAtucThreshold15MinFailedFastR, adslAtucThreshold15MinFailedFastR,
adslAtucThreshold15MinSesL, adslAtucThreshold15MinSesL,
adslAtucThreshold15MinUasL adslAtucThreshold15MinUasL
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A collection of objects providing alarm profile "A collection of objects providing alarm profile
control for the ADSL system." control for the ADSL system."
::= { adsl2Groups 4 } END ::= { adsl2Groups 5 }
adsl2NotificationsGroup NOTIFICATION-GROUP
NOTIFICATIONS {
adslAtucFailedFastRThreshTrap,
adslAtucSesLThreshTrap,
adslAtucUasLThreshTrap
}
STATUS current
DESCRIPTION
"The collection of ADSL 2 notifications."
::= { adsl2Groups 6 }
END
9. Acknowledgments 9. Acknowledgments
This document is a product of the ADSL MIB Working Group. This document is a product of the ADSL MIB Working Group.
10. References 10. References
[1] B. Wijnen, D. Harrington, R. Presuhn, "Structure of [1] B. Wijnen, D. Harrington, R. Presuhn, "Structure of
Management Information Version 2 (SMIv2)" RFC 2578, Management Information Version 2 (SMIv2)" RFC 2578,
April 1999. April 1999.
 End of changes. 

This html diff was produced by rfcdiff 1.23, available from http://www.levkowetz.com/ietf/tools/rfcdiff/