draft-ietf-adslmib-adsl2-04.txt   draft-ietf-adslmib-adsl2-05.txt 
Network Working Group M. Morgenstern Network Working Group M. Morgenstern
Internet-Draft M. Dodge Internet-Draft M. Dodge
Expires: April 19, 2006 ECI Telecom Ltd. Expires: July 19, 2006 ECI Telecom Ltd.
S. Baillie S. Baillie
U. Bonollo U. Bonollo
NEC Australia NEC Australia
October 16, 2005 January 15, 2006
Definitions of Managed Objects for New Generation Digital Subscriber Definitions of Managed Objects for Asymmetric Digital Subscriber Line 2
Lines (NG-XDSL) (ADSL2)
draft-ietf-adslmib-adsl2-04.txt draft-ietf-adslmib-adsl2-05.txt
Status of this Memo Status of this Memo
By submitting this Internet-Draft, each author represents that any By submitting this Internet-Draft, each author represents that any
applicable patent or other IPR claims of which he or she is aware applicable patent or other IPR claims of which he or she is aware
have been or will be disclosed, and any of which he or she becomes have been or will be disclosed, and any of which he or she becomes
aware will be disclosed, in accordance with Section 6 of BCP 79. aware will be disclosed, in accordance with Section 6 of BCP 79.
Internet-Drafts are working documents of the Internet Engineering Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF), its areas, and its working groups. Note that Task Force (IETF), its areas, and its working groups. Note that
skipping to change at page 1, line 38 skipping to change at page 1, line 38
and may be updated, replaced, or obsoleted by other documents at any and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress." material or to cite them other than as "work in progress."
The list of current Internet-Drafts can be accessed at The list of current Internet-Drafts can be accessed at
http://www.ietf.org/ietf/1id-abstracts.txt. http://www.ietf.org/ietf/1id-abstracts.txt.
The list of Internet-Draft Shadow Directories can be accessed at The list of Internet-Draft Shadow Directories can be accessed at
http://www.ietf.org/shadow.html. http://www.ietf.org/shadow.html.
This Internet-Draft will expire on April 19, 2006. This Internet-Draft will expire on July 19, 2006.
Copyright Notice Copyright Notice
Copyright (C) The Internet Society (2005). Copyright (C) The Internet Society (2006).
Abstract Abstract
This document defines a Management Information Base (MIB) module for This document defines a Management Information Base (MIB) module for
use with network management protocols in the Internet community. In use with network management protocols in the Internet community. In
particular, it describes objects used for managing parameters of the particular, it describes objects used for managing parameters of the
"Asymmetric Digital Subscriber Line" family of interface types, "Asymmetric Digital Subscriber Line" family of interface types,
especially including ADSL, ADSL2, and ADSL2+. especially including ADSL, ADSL2, and ADSL2+.
Table of Contents Table of Contents
1. The Internet-Standard Management Framework . . . . . . . . . 3 1. The Internet-Standard Management Framework . . . . . . . . . 3
2. Overview . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2. Overview . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2.1. Relationship to other MIBs . . . . . . . . . . . . . . . 4 2.1. Relationship to other MIBs . . . . . . . . . . . . . . . 4
2.2. IANA Considerations . . . . . . . . . . . . . . . . . . . 6 2.2. IANA Considerations . . . . . . . . . . . . . . . . . . . 6
2.3. Conventions Used in the MIB Module . . . . . . . . . . . 6 2.3. Conventions Used in the MIB Module . . . . . . . . . . . 6
2.4. Structure . . . . . . . . . . . . . . . . . . . . . . . . 13 2.4. Structure . . . . . . . . . . . . . . . . . . . . . . . . 13
2.5. Line Topology . . . . . . . . . . . . . . . . . . . . . . 15 2.5. Persistence . . . . . . . . . . . . . . . . . . . . . . . 15
2.6. Counters, Interval Buckets, and Thresholds . . . . . . . 16 2.6. Line Topology . . . . . . . . . . . . . . . . . . . . . . 18
2.7. Profiles . . . . . . . . . . . . . . . . . . . . . . . . 18 2.7. Counters, Interval Buckets, and Thresholds . . . . . . . 18
2.8. Notifications . . . . . . . . . . . . . . . . . . . . . . 21 2.8. Profiles . . . . . . . . . . . . . . . . . . . . . . . . 20
3. Definitions . . . . . . . . . . . . . . . . . . . . . . . . . 23 2.9. Notifications . . . . . . . . . . . . . . . . . . . . . . 24
4. Implementation Analysis . . . . . . . . . . . . . . . . . . . 148 3. Definitions . . . . . . . . . . . . . . . . . . . . . . . . . 25
5. Security Considerations . . . . . . . . . . . . . . . . . . . 149 4. Implementation Analysis . . . . . . . . . . . . . . . . . . . 151
6. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . 156 5. Security Considerations . . . . . . . . . . . . . . . . . . . 152
7. References . . . . . . . . . . . . . . . . . . . . . . . . . 156 6. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . 159
7.1. Normative References . . . . . . . . . . . . . . . . . . 156 7. References . . . . . . . . . . . . . . . . . . . . . . . . . 159
7.2. Informative References . . . . . . . . . . . . . . . . . 158 7.1. Normative References . . . . . . . . . . . . . . . . . . 159
Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 159 7.2. Informative References . . . . . . . . . . . . . . . . . 161
Intellectual Property and Copyright Statements . . . . . . . . . 160 Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 162
Intellectual Property and Copyright Statements . . . . . . . . . 163
1. The Internet-Standard Management Framework 1. The Internet-Standard Management Framework
For a detailed overview of the documents that describe the current For a detailed overview of the documents that describe the current
Internet-Standard Management Framework, please refer to Section 7 of Internet-Standard Management Framework, please refer to Section 7 of
RFC 3410 [RFC3410]. RFC 3410 [RFC3410].
Managed objects are accessed via a virtual information store, termed Managed objects are accessed via a virtual information store, termed
the Management Information Base or MIB. MIB objects are generally the Management Information Base or MIB. MIB objects are generally
accessed through the Simple Network Management Protocol (SNMP). accessed through the Simple Network Management Protocol (SNMP).
skipping to change at page 4, line 23 skipping to change at page 4, line 23
this document. this document.
2.1. Relationship to other MIBs 2.1. Relationship to other MIBs
This section outlines the relationship of this MIB module with other This section outlines the relationship of this MIB module with other
MIB modules described in RFCs. Specifically, IF-MIB as presented in MIB modules described in RFCs. Specifically, IF-MIB as presented in
RFC 2863 [RFC2863] is discussed. RFC 2863 [RFC2863] is discussed.
2.1.1. General IF-MIB Integration (RFC 2863) 2.1.1. General IF-MIB Integration (RFC 2863)
The New Generation xDSL Line MIB specifies the detailed attributes of The ADSL2 Line MIB specifies the detailed attributes of a data
a data interface. As such, it needs to integrate with RFC 2863 interface. As such, it needs to integrate with RFC 2863 [RFC2863].
[RFC2863]. The IANA has assigned the following ifTypes, which may be The IANA has assigned the following ifTypes, which may be applicable
applicable for ADSL lines: for ADSL lines:
IANAifType ::= TEXTUAL-CONVENTION IANAifType ::= TEXTUAL-CONVENTION
... ...
SYNTAX INTEGER { SYNTAX INTEGER {
... ...
channel(70), -- channel channel(70), -- channel
ADSL (94), -- Asymmetric Digital Subscriber Loop ADSL (94), -- Asymmetric Digital Subscriber Loop
... ...
Interleave(124), -- Interleaved Channel Interleave(124), -- Interleaved Channel
Fast(125), -- Fast Channel Fast(125), -- Fast Channel
... ...
ADSL2 (230), -- Asymmetric Digital Subscriber Loop 2 ADSL2 (230), -- Asymmetric Digital Subscriber Loop 2
... ...
} }
ADSL lines that are identified with ifType=ADSL (94) SHOULD be ADSL lines that are identified with ifType=ADSL (94) MUST be managed
managed with the MIB specified by RFC2662. ADSL, ADSL2, and ADSL2+ with the MIB specified by RFC2662. ADSL, ADSL2, and ADSL2+ lines
lines identified with ifType=ADSL2 (230) SHOULD be managed with the identified with ifType=ADSL2 (230) MUST be managed with the MIB
MIB specified by this document. specified by this document.
In any case, the SNMP agent may use either ifType=Interleave (124) or In any case, the SNMP agent may use either ifType=Interleave (124) or
Fast (125) for each channel, e.g., depending on whether or not it is Fast (125) for each channel, e.g., depending on whether or not it is
capable of using an interleaver on that channel. It may use the capable of using an interleaver on that channel. It may use the
ifType=channel (70) when all channels are capable of using an ifType=channel (70) when all channels are capable of using an
interleaver (e.g., for ADSL2 xtus). interleaver (e.g., for ADSL2 xtus).
Note that the ifFixedLengthGroup from RFC 2863 [RFC2863] MUST be Note that the ifFixedLengthGroup from RFC 2863 [RFC2863] MUST be
supported and that the ifRcvAddressGroup does not apply to this MIB supported and that the ifRcvAddressGroup does not apply to this MIB
module. module.
skipping to change at page 5, line 19 skipping to change at page 5, line 19
2.1.2. Usage of ifTable 2.1.2. Usage of ifTable
The MIB branch identified by ifType contains tables appropriate for The MIB branch identified by ifType contains tables appropriate for
the interface types described above. Most such tables extend the the interface types described above. Most such tables extend the
ifEntry table, and are indexed by ifIndex. For interfaces in systems ifEntry table, and are indexed by ifIndex. For interfaces in systems
implementing this MIB module, those table entries indexed by ifIndex implementing this MIB module, those table entries indexed by ifIndex
MUST be persistent. MUST be persistent.
The following attributes are part of the mandatory The following attributes are part of the mandatory
ifGeneralInformationGroup in the Interfaces MIB [RFC2863], and are ifGeneralInformationGroup in the Interfaces MIB [RFC2863], and are
not duplicated in the New Generation DSL MIB. not duplicated in the ADSL2 Line MIB.
=================================================================== ===================================================================
ifIndex Interface index. ifIndex Interface index.
ifDescr See interfaces MIB. ifDescr See interfaces MIB.
ifType ADSL2 (230) or ifType ADSL2 (230) or
Channel (70) or Channel (70) or
Interleave (124) or Interleave (124) or
skipping to change at page 6, line 10 skipping to change at page 6, line 10
ifHighSpeed Set as appropriate. ifHighSpeed Set as appropriate.
ifConnectorPresent Set as appropriate. ifConnectorPresent Set as appropriate.
=================================================================== ===================================================================
Figure 1: Use of ifTable Objects Figure 1: Use of ifTable Objects
2.2. IANA Considerations 2.2. IANA Considerations
The NGDSL-LINE-MIB module requires the allocation of a new ifType The ADSL2-LINE-MIB module requires the allocation of a new ifType
value for Asymmetric Digital Subscriber Loop Version 2, to value for Asymmetric Digital Subscriber Loop Version 2, to
distinguish between ADSL lines that are managed with the RFC2662 distinguish between ADSL lines that are managed with the RFC2662
management model and ADSL/ADSL2 and ADSL2+ lines managed with the management model and ADSL/ADSL2 and ADSL2+ lines managed with the
model defined in this document. model defined in this document.
Also the NGDSL-LINE-MIB module requires the allocation of a single Also the ADSL2-LINE-MIB module requires the allocation of a single
object identifier for its MODULE-IDENTITY. The IANA should allocate object identifier for its MODULE-IDENTITY. The IANA should allocate
this object identifier in the transmission subtree. this object identifier in the transmission subtree.
An assignment was in fact done when RFC 2662 was published, but as An assignment was in fact done when RFC 2662 was published, but as
this MIB does not obsolete RFC 2662, it requires new assignment from this MIB does not obsolete RFC 2662, it requires new assignment from
IANA. IANA.
2.3. Conventions Used in the MIB Module 2.3. Conventions Used in the MIB Module
2.3.1. Naming Conventions 2.3.1. Naming Conventions
skipping to change at page 15, line 33 skipping to change at page 15, line 37
- adsl2LinePerfUASThreshAtur - adsl2LinePerfUASThreshAtur
- adsl2LinePerfCodingViolationsThreshAtuc - adsl2LinePerfCodingViolationsThreshAtuc
- adsl2LinePerfCodingViolationsThreshAtur - adsl2LinePerfCodingViolationsThreshAtur
- adsl2LinePerfCorrectedThreshAtuc - adsl2LinePerfCorrectedThreshAtuc
- adsl2LinePerfCorrectedThreshAtur - adsl2LinePerfCorrectedThreshAtur
- adsl2LinePerfFailedFullInitThresh - adsl2LinePerfFailedFullInitThresh
- adsl2LinePerfFailedShortInitThresh - adsl2LinePerfFailedShortInitThresh
- adsl2LineStatusChangeAtuc - adsl2LineStatusChangeAtuc
- adsl2LineStatusChangeAtur - adsl2LineStatusChangeAtur
2.5. Line Topology 2.5. Persistence
All read-create objects and most read-write objects defined in this
MIB module SHOULD be stored persistently. Following is an exhaustive
list of these persistent objects:
adsl2LineCnfgTemplate
adsl2LineAlarmCnfgTemplate
adsl2LineCmndConfPmsf
adsl2LineCmndConfLdsf
adsl2LineCmndAutomodeColdStart
adsl2LConfTempTemplateName
adsl2LConfTempLineProfile
adsl2LConfTempChan1ConfProfile
adsl2LConfTempChan1RaRatioDs
adsl2LConfTempChan1RaRatioUs
adsl2LConfTempChan2ConfProfile
adsl2LConfTempChan2RaRatioDs
adsl2LConfTempChan2RaRatioUs
adsl2LConfTempChan3ConfProfile
adsl2LConfTempChan3RaRatioDs
adsl2LConfTempChan3RaRatioUs
adsl2LConfTempChan4ConfProfile
adsl2LConfTempChan4RaRatioDs
adsl2LConfTempChan4RaRatioUs
adsl2LConfTempRowStatus
adsl2LConfProfProfileName
adsl2LConfProfScMaskDs
adsl2LConfProfScMaskUs
adsl2LConfProfRfiBandsDs
adsl2LConfProfRaModeDs
adsl2LConfProfRaModeUs
adsl2LConfProfRaUsNrmDs
adsl2LConfProfRaUsNrmUs
adsl2LConfProfRaUsTimeDs
adsl2LConfProfRaUsTimeUs
adsl2LConfProfRaDsNrmsDs
adsl2LConfProfRaDsNrmsUs
adsl2LConfProfRaDsTimeDs
adsl2LConfProfRaDsTimeUs
adsl2LConfProfTargetSnrmDs
adsl2LConfProfTargetSnrmUs
adsl2LConfProfMaxSnrmDs
adsl2LConfProfMaxSnrmUs
adsl2LConfProfMinSnrmDs
adsl2LConfProfMinSnrmUs
adsl2LConfProfMsgMinUs
adsl2LConfProfMsgMinDs
adsl2LConfProfAtuTransSysEna
adsl2LConfProfPmMode
adsl2LConfProfL0Time
adsl2LConfProfL2Time
adsl2LConfProfL2Atpr
adsl2LConfProfL2Atprt
adsl2LconfProfRowStatus
adsl2LconfProfAdslMode
adsl2LConfProfMaxNomPsdDs
adsl2LConfProfMaxNomPsdUs
adsl2LConfProfMaxNomAtpDs
adsl2LConfProfMaxNomAtpUs
adsl2LConfProfMaxAggRxPwrUs
adsl2LConfProfPsdMaskDs
adsl2LConfProfPsdMaskUs
adsl2LConfProfPsdMaskSelectUs
adsl2LConfProfModeSpecRowStatus
adsl2ChConfProfProfileName
adsl2ChConfProfMinDataRateDs
adsl2ChConfProfMinDataRateUs
adsl2ChConfProfMinResDataRateDs
adsl2ChConfProfMinResDataRateUs
adsl2ChConfProfMaxDataRateDs
adsl2ChConfProfMaxDataRateUs
adsl2ChConfProfMinDataRateLowPwrDs
adsl2ChConfProfMaxDelayDs
adsl2ChConfProfMaxDelayUs
adsl2ChConfProfMinProtectionDs
adsl2ChConfProfMinProtectionUs
adsl2ChConfProfMaxBerDs
adsl2ChConfProfMaxBerUs
adsl2ChConfProfUsDataRateDs
adsl2ChConfProfDsDataRateDs
adsl2ChConfProfUsDataRateUs
adsl2ChConfProfDsDataRateUs
adsl2ChConfProfImaEnabled
adsl2ChConfProfRowStatus
adsl2LAlarmConfTempTemplateName
adsl2LAlarmConfTempLineProfile
adsl2LAlarmConfTempChan1ConfProfile
adsl2LAlarmConfTempChan2ConfProfile
adsl2LAlarmConfTempChan3ConfProfile
adsl2LAlarmConfTempChan4ConfProfile
adsl2LAlarmConfTempRowStatus
adsl2LineAlarmConfProfileName
adsl2LineAlarmConfProfileAtucThresh15MinFecs
adsl2LineAlarmConfProfileAtucThresh15MinEs
adsl2LineAlarmConfProfileAtucThresh15MinSes
adsl2LineAlarmConfProfileAtucThresh15MinLoss
adsl2LineAlarmConfProfileAtucThresh15MinUas
adsl2LineAlarmConfProfileAturThresh15MinFecs
adsl2LineAlarmConfProfileAturThresh15MinEs
adsl2LineAlarmConfProfileAturThresh15MinSes
adsl2LineAlarmConfProfileAturThresh15MinLoss
adsl2LineAlarmConfProfileAturThresh15MinUas
adsl2LineAlarmConfProfileThresh15MinFailedFullInt
adsl2LineAlarmConfProfileThresh15MinFailedShrtInt
adsl2LineAlarmConfProfileRowStatus
adsl2ChAlarmConfProfileName
adsl2ChAlarmConfProfileAtucThresh15MinCodingViolations
adsl2ChAlarmConfProfileAtucThresh15MinCorrected
adsl2ChAlarmConfProfileAturThresh15MinCodingViolations
adsl2ChAlarmConfProfileAturThresh15MinCorrected
adsl2ChAlarmConfProfileRowStatus
Note also that the interface indices in this MIB are maintained
persistently. View-based Access Control Model (VACM) data relating
to these SHOULD be stored persistently as well [RFC3410].
2.6. Line Topology
An ADSL/ADSL2 and ADSL2+ Line consists of two units: atuc (the An ADSL/ADSL2 and ADSL2+ Line consists of two units: atuc (the
central termination unit) and atur (the remote termination unit). central termination unit) and atur (the remote termination unit).
There are up to 4 channels, each carrying an independent information There are up to 4 channels, each carrying an independent information
flow, as shown in the figure below. flow, as shown in the figure below.
<-- Network Side Customer Side --> <-- Network Side Customer Side -->
|<//////////////// ADSL/ADSL2/ADSL2+ Span /////////////////>| |<//////////////// ADSL/ADSL2/ADSL2+ Span /////////////////>|
skipping to change at page 16, line 26 skipping to change at page 18, line 38
Key: <////> ADSL/ADSL2/ADSL2+ Span Key: <////> ADSL/ADSL2/ADSL2+ Span
<~~~~> ADSL/ADSL2/ADSL2+ twisted-pair <~~~~> ADSL/ADSL2/ADSL2+ twisted-pair
-1- Channel #1 carried over the line -1- Channel #1 carried over the line
-2- Optional channel #2 carried over the line -2- Optional channel #2 carried over the line
-3- Optional channel #3 carried over the line -3- Optional channel #3 carried over the line
-4- Optional channel #4 carried over the line -4- Optional channel #4 carried over the line
Figure 2: General topology for an ADSL/ADSL2/ADSL2+ Line Figure 2: General topology for an ADSL/ADSL2/ADSL2+ Line
2.6. Counters, Interval Buckets, and Thresholds 2.7. Counters, Interval Buckets, and Thresholds
2.6.1. Counters Managed 2.7.1. Counters Managed
There are various types of counters specified in this MIB. Each There are various types of counters specified in this MIB. Each
counter refers either to the whole ADSL/ADSL2/ADSL2+ line, to one of counter refers either to the whole ADSL/ADSL2/ADSL2+ line, to one of
the xtu entities, or to one of the bearer channels. the xtu entities, or to one of the bearer channels.
o On the whole line level o On the whole line level
For full initializations, failed full initializations, short For full initializations, failed full initializations, short
initializations, and for failed short initializations there are event initializations, and for failed short initializations there are event
counters, current 15-minute and 0 to 96 15-minute history bucket(s) counters, current 15-minute and 0 to 96 15-minute history bucket(s)
skipping to change at page 17, line 13 skipping to change at page 19, line 24
associated threshold notification. associated threshold notification.
o On the bearer channel level o On the bearer channel level
For the coding violations (CRC anomalies) and corrected blocks (i.e., For the coding violations (CRC anomalies) and corrected blocks (i.e.,
FEC events) there are event counters, current 15-minute and 0 to 96 FEC events) there are event counters, current 15-minute and 0 to 96
15-minute history bucket(s) of "interval-counters", as well as 15-minute history bucket(s) of "interval-counters", as well as
current and 0 to 30 previous 1-day interval-counter(s). Each current current and 0 to 30 previous 1-day interval-counter(s). Each current
15-minute event bucket has an associated threshold notification. 15-minute event bucket has an associated threshold notification.
2.6.2. Minimum Number Of Buckets 2.7.2. Minimum Number Of Buckets
Although it is possible to support up to 96 15-minute history buckets Although it is possible to support up to 96 15-minute history buckets
of "interval-counters", systems implementing this MIB module SHOULD of "interval-counters", systems implementing this MIB module SHOULD
practically support at least 16 buckets, as specified in ITU-T practically support at least 16 buckets, as specified in ITU-T
G.997.1, paragraph 7.2.7.2. G.997.1, paragraph 7.2.7.2.
Similarly, it is possible to support up to 30 previous 1-day Similarly, it is possible to support up to 30 previous 1-day
"interval-counters", but systems implementing this MIB module SHOULD "interval-counters", but systems implementing this MIB module SHOULD
support at least 1 previous day buckets. support at least 1 previous day buckets.
2.6.3. Interval Buckets Initialization 2.7.3. Interval Buckets Initialization
There is no requirement for an agent to ensure a fixed relationship There is no requirement for an agent to ensure a fixed relationship
between the start of a 15-minute interval and any wall clock; between the start of a 15-minute interval and any wall clock;
however, some implementations may align the 15-minute intervals with however, some implementations may align the 15-minute intervals with
quarter hours. Likewise, an implementation may choose to align one quarter hours. Likewise, an implementation may choose to align one
day intervals with the start of a day. day intervals with the start of a day.
Counters are not reset when an xtU is reinitialized, only when the Counters are not reset when an xtU is reinitialized, only when the
agent is reset or reinitialized (or under specific request outside agent is reset or reinitialized (or under specific request outside
the scope of this MIB module). the scope of this MIB module).
2.6.4. Interval Buckets Validity 2.7.4. Interval Buckets Validity
As in RFC 3593 [RFC3593] and RFC 2662 [RFC2662], in case the data for As in RFC 3593 [RFC3593] and RFC 2662 [RFC2662], in case the data for
an interval is suspect or known to be invalid, the agent MUST report an interval is suspect or known to be invalid, the agent MUST report
the interval as invalid. If the current 15-minute event bucket is the interval as invalid. If the current 15-minute event bucket is
determined to be invalid, the element management system SHOULD ignore determined to be invalid, the element management system SHOULD ignore
its content and the agent MUST NOT generate notifications based upon its content and the agent MUST NOT generate notifications based upon
the value of the event bucket. the value of the event bucket.
A valid 15-minute event bucket SHOULD usually count the events for A valid 15-minute event bucket SHOULD usually count the events for
exactly 15 minutes. Similarly, a valid 1-day event bucket SHOULD exactly 15 minutes. Similarly, a valid 1-day event bucket SHOULD
skipping to change at page 18, line 29 skipping to change at page 20, line 36
by reporting the actual Monitoring Time of a monitoring interval. by reporting the actual Monitoring Time of a monitoring interval.
This parameter is relevant only for Valid intervals, but is useful This parameter is relevant only for Valid intervals, but is useful
for these exceptional scenarios: for these exceptional scenarios:
a) The management system MAY still declare a partial PM interval as a) The management system MAY still declare a partial PM interval as
Valid and report the actual number of seconds the interval lasted. Valid and report the actual number of seconds the interval lasted.
b) If the interval was shortened or extended due to clock b) If the interval was shortened or extended due to clock
corrections, the management system SHOULD report the actual number corrections, the management system SHOULD report the actual number
of seconds the interval lasted, beside reporting that the interval of seconds the interval lasted, beside reporting that the interval
is Valid. is Valid.
2.7. Profiles 2.8. Profiles
As a managed node can handle a large number of xtUs, (e.g., hundreds As a managed node can handle a large number of xtUs, (e.g., hundreds
or perhaps thousands of lines), provisioning every parameter on every or perhaps thousands of lines), provisioning every parameter on every
xtU may become burdensome. Moreover, most lines are provisioned xtU may become burdensome. Moreover, most lines are provisioned
identically with the same set of parameters. To simplify the identically with the same set of parameters. To simplify the
provisioning process, this MIB module makes use of profiles and provisioning process, this MIB module makes use of profiles and
templates. templates.
A configuration profile is a set of parameters that can be shared by A configuration profile is a set of parameters that can be shared by
multiple entities. There are configuration profiles to address the multiple entities. There are configuration profiles to address the
skipping to change at page 19, line 9 skipping to change at page 21, line 17
Similarly to the configuration profiles and templates, this MIB Similarly to the configuration profiles and templates, this MIB
module makes use of templates and profiles for specifying the alarm module makes use of templates and profiles for specifying the alarm
thresholds associated with performance parameters. This allows thresholds associated with performance parameters. This allows
provisioning multiple lines with the same criteria for generating provisioning multiple lines with the same criteria for generating
threshold crossing notifications. threshold crossing notifications.
The following paragraphs describe templates and profiles used in this The following paragraphs describe templates and profiles used in this
MIB module MIB module
2.7.1. Configuration Profiles And Templates 2.8.1. Configuration Profiles And Templates
o Line Configuration Profiles - Line configuration profiles contain o Line Configuration Profiles - Line configuration profiles contain
parameters for configuring the low layer of ADSL/ADSL2 and ADSL2+ parameters for configuring the low layer of ADSL/ADSL2 and ADSL2+
lines. They are defined in the adsl2LineConfProfTable. lines. They are defined in the adsl2LineConfProfTable.
The line configuration includes issues such as the specific ADSL/ The line configuration includes issues such as the specific ADSL/
ADSL2 or ADSL2+ modes to enable on the respective line, power ADSL2 or ADSL2+ modes to enable on the respective line, power
spectrum parameters, rate adaptation criteria, and SNR margin spectrum parameters, rate adaptation criteria, and SNR margin
related parameters. A subset of the line configuration parameters related parameters. A subset of the line configuration parameters
depends upon the specific ADSL Mode allowed (i.e., Does the depends upon the specific ADSL Mode allowed (i.e., Does the
skipping to change at page 19, line 47 skipping to change at page 22, line 7
ADSL2+ line. They are defined in the adsl2LineConfTemplateTable. ADSL2+ line. They are defined in the adsl2LineConfTemplateTable.
The line configuration template includes one index (OID) of a line The line configuration template includes one index (OID) of a line
configuration profile and one to four indexes of channel configuration profile and one to four indexes of channel
configuration profiles. The template also addresses the issue of configuration profiles. The template also addresses the issue of
distributing the excess available data rate on each traffic flow distributing the excess available data rate on each traffic flow
direction (i.e., the data rate left after each channel is direction (i.e., the data rate left after each channel is
allocated a data rate to satisfy its minimum requested data rate) allocated a data rate to satisfy its minimum requested data rate)
among the various channels. among the various channels.
2.7.2. Alarm Configuration Profiles And Templates 2.8.2. Alarm Configuration Profiles And Templates
o Line Alarm Configuration Profiles - Line level Alarm configuration o Line Alarm Configuration Profiles - Line level Alarm configuration
profiles contain the threshold values for Performance Monitoring profiles contain the threshold values for Performance Monitoring
(PM) parameters, counted either on the whole line level or on an (PM) parameters, counted either on the whole line level or on an
xtu level. Thresholds are required only for failures and xtu level. Thresholds are required only for failures and
anomalies. E.g., there are thresholds for failed initializations anomalies. E.g., there are thresholds for failed initializations
and LOS seconds, but not for the aggregate number of full and LOS seconds, but not for the aggregate number of full
initializations. These profiles are defined in the initializations. These profiles are defined in the
adsl2LineAlarmConfProfTable. adsl2LineAlarmConfProfTable.
o Channel Alarm Configuration Profiles - Channel level Alarm o Channel Alarm Configuration Profiles - Channel level Alarm
skipping to change at page 20, line 27 skipping to change at page 22, line 34
o Line Alarm Configuration Templates - Line Alarm configuration o Line Alarm Configuration Templates - Line Alarm configuration
templates allow combining line level alarm configuration profiles templates allow combining line level alarm configuration profiles
and channel level alarm configuration profiles to a comprehensive and channel level alarm configuration profiles to a comprehensive
configuration of the PM thresholds for ADSL/ADSL2 and ADSL2+ line. configuration of the PM thresholds for ADSL/ADSL2 and ADSL2+ line.
They are defined in the adsl2LineAlarmConfTemplateTable. They are defined in the adsl2LineAlarmConfTemplateTable.
The line alarm configuration template includes one index (OID) of The line alarm configuration template includes one index (OID) of
a line level alarm configuration profile and one to four indexes a line level alarm configuration profile and one to four indexes
of channel level alarm configuration profiles. of channel level alarm configuration profiles.
2.7.3. Managing Profiles And Templates 2.8.3. Managing Profiles And Templates
The index value for each profile and template is a locally-unique, The index value for each profile and template is a locally-unique,
administratively assigned name having the textual convention administratively assigned name having the textual convention
'SnmpAdminString' (RFC 3411 [RFC3411]). 'SnmpAdminString' (RFC 3411 [RFC3411]).
One or more lines may be configured to share parameters of a single One or more lines may be configured to share parameters of a single
configuration template (e.g., adsl2LConfTempTemplateName = 'silver') configuration template (e.g., adsl2LConfTempTemplateName = 'silver')
by setting its adsl2LCnfgLineTemplate objects to the value of this by setting its adsl2LCnfgLineTemplate objects to the value of this
template. template.
One or more lines may be configured to share parameters of a single One or more lines may be configured to share parameters of a single
Alarm configuration template (e.g., adsl2LAlarmConfTempTemplateName = Alarm configuration template (e.g., adsl2LAlarmConfTempTemplateName =
'silver') by setting its adsl2LCnfgAlarmTemplate objects to the value 'silver') by setting its adsl2LCnfgAlarmTemplate objects to the value
of this template. of this template.
Before a template can be deleted or taken out of service it MUST be Before a template can be deleted or taken out of service it MUST be
first unreferenced from all associated lines. Implementations MAY first unreferenced from all associated lines. Implementations MAY
also reject template modification while it is associated with any also reject template modification while it is associated with any
line. line. Implementations MUST reject template modification while its
row status is set to 'active'.
Before a profile can be deleted or taken out of service it MUST be Before a profile can be deleted or taken out of service it MUST be
first unreferenced from all associated templates. Implementations first unreferenced from all associated templates. Implementations
MAY also reject profile modification while it is referenced by any MAY also reject profile modification while it is referenced by any
template. template. Implementations MUST reject profile modification while its
row status is set to 'active'.
Implementations MUST provide a default profile whose name is 'DEFVAL' Implementations MUST provide a default profile whose name is 'DEFVAL'
for each profile and template type. The values of the associated for each profile and template type. The values of the associated
parameters will be vendor-specific unless otherwise indicated in this parameters will be vendor-specific unless otherwise indicated in this
document. Before a line's templates have been set, these templates document. Before a line's templates have been set, these templates
will be automatically used by setting adsl2LCnfgLineTemplate and will be automatically used by setting adsl2LCnfgLineTemplate and
adsl2LCnfgAlarmTemplate to 'DEFVAL' where appropriate. This default adsl2LCnfgAlarmTemplate to 'DEFVAL' where appropriate. This default
profile name, 'DEFVAL', is considered reserved in the context of profile name, 'DEFVAL', is considered reserved in the context of
profiles and templates defined in this MIB module. profiles and templates defined in this MIB module.
Profiles and templates are created, assigned, and deleted dynamically Profiles and templates are created, assigned, and deleted dynamically
using the profile name and profile row status in each of the profile using the profile name and profile row status in each of the profile
tables. tables.
If the implementation allows modifying a profile or template while it If the implementation allows modifying a profile or template while it
is associated with a line, then such changes MUST take effect is associated with a line, then such changes MUST take effect
immediately. These changes MAY result in a restart (hard reset or immediately. These changes MAY result in a restart (hard reset or
soft restart) of the units on the line. soft restart) of the units on the line.
2.7.4. Managing Multiple Bearer Channels 2.8.4. Managing Multiple Bearer Channels
The number of bearer channels is configured by setting the template The number of bearer channels is configured by setting the template
attributes adsl2LConfTempChan1ConfProfile, attributes adsl2LConfTempChan1ConfProfile,
adsl2LConfTempChan2ConfProfile, adsl2LConfTempChan3ConfProfile, and adsl2LConfTempChan2ConfProfile, adsl2LConfTempChan3ConfProfile, and
adsl2LConfTempChan4ConfProfile and then assigning that template to a adsl2LConfTempChan4ConfProfile and then assigning that template to a
DSL line using the adsl2LineCnfgTemplate attribute. When the number DSL line using the adsl2LineCnfgTemplate attribute. When the number
of bearer channels for a DSL line changes, the SNMP agent will of bearer channels for a DSL line changes, the SNMP agent will
automatically create or destroy rows in channel-related tables automatically create or destroy rows in channel-related tables
associated with that line. For example, when a DSL line is operating associated with that line. For example, when a DSL line is operating
with one bearer channel, there will be zero rows in channel-related with one bearer channel, there will be zero rows in channel-related
skipping to change at page 21, line 41 skipping to change at page 24, line 4
automatically create or destroy rows in channel-related tables automatically create or destroy rows in channel-related tables
associated with that line. For example, when a DSL line is operating associated with that line. For example, when a DSL line is operating
with one bearer channel, there will be zero rows in channel-related with one bearer channel, there will be zero rows in channel-related
tables for channels two, three, and four. The SNMP agent MUST create tables for channels two, three, and four. The SNMP agent MUST create
and destroy channel related rows as follows : and destroy channel related rows as follows :
o When the number of bearer channels for a DSL line changes to a o When the number of bearer channels for a DSL line changes to a
higher number, the SNMP agent will automatically create rows in higher number, the SNMP agent will automatically create rows in
the adsl2ChannelStatusTable, and adsl2PMChCurrTable tables for the adsl2ChannelStatusTable, and adsl2PMChCurrTable tables for
that line. that line.
o When the number of bearer channels for a DSL line changes to a o When the number of bearer channels for a DSL line changes to a
lower number, the SNMP agent will automatically destroy rows in lower number, the SNMP agent will automatically destroy rows in
the adsl2ChannelStatusTable, the adsl2ChannelStatusTable,
adsl2PMChCurrTable,adsl2PMChHist15MinTable and adsl2PMChCurrTable,adsl2PMChHist15MinTable and
adsl2PMChHist1DTable tables for that line. adsl2PMChHist1DTable tables for that line.
2.8. Notifications 2.9. Notifications
The ability to generate the SNMP notifications coldStart/WarmStart The ability to generate the SNMP notifications coldStart/WarmStart
(per [RFC3418]), which are per agent (e.g., per Digital Subscriber (per [RFC3418]), which are per agent (e.g., per Digital Subscriber
Line Access Multiplexer, or DSLAM, in such a device), and linkUp/ Line Access Multiplexer, or DSLAM, in such a device), and linkUp/
linkDown (per [RFC2863]), which are per interface (i.e., ADSL/ADSL2 linkDown (per [RFC2863]), which are per interface (i.e., ADSL/ADSL2
or ADSL2+ line) is required. or ADSL2+ line) is required.
A linkDown notification MAY be generated whenever any of ES, SES, CRC A linkDown notification MAY be generated whenever any of ES, SES, CRC
Anomaly, LOS, LOF, or UAS event occurs. The corresponding linkUp Anomaly, LOS, LOF, or UAS event occurs. The corresponding linkUp
notification MAY be sent when all link failure conditions are notification MAY be sent when all link failure conditions are
skipping to change at page 23, line 14 skipping to change at page 25, line 25
Note that the Network Management System, or NMS, may receive a Note that the Network Management System, or NMS, may receive a
linkDown notification, as well, if enabled (via linkDown notification, as well, if enabled (via
ifLinkUpDownTrapEnable [RFC2863]). At the beginning of the next 15 ifLinkUpDownTrapEnable [RFC2863]). At the beginning of the next 15
minute interval, the counter is reset. When the first second goes by minute interval, the counter is reset. When the first second goes by
and the event occurs, the current interval bucket will be 1, which and the event occurs, the current interval bucket will be 1, which
equals the threshold, and the notification will be sent again. equals the threshold, and the notification will be sent again.
3. Definitions 3. Definitions
NGDSL-LINE-TC-MIB DEFINITIONS ::= BEGIN ADSL2-LINE-TC-MIB DEFINITIONS ::= BEGIN
IMPORTS IMPORTS
MODULE-IDENTITY, MODULE-IDENTITY,
transmission transmission
FROM SNMPv2-SMI FROM SNMPv2-SMI
TEXTUAL-CONVENTION TEXTUAL-CONVENTION
FROM SNMPv2-TC; FROM SNMPv2-TC;
ngdslTCMIB MODULE-IDENTITY adsl2TCMIB MODULE-IDENTITY
LAST-UPDATED "200510090000Z" -- October 9, 2005 LAST-UPDATED "200601150000Z" -- January 15, 2006
ORGANIZATION "ADSLMIB Working Group" ORGANIZATION "ADSLMIB Working Group"
CONTACT-INFO "WG-email: adslmib@ietf.org CONTACT-INFO "WG-email: adslmib@ietf.org
Info: https://www1.ietf.org/mailman/listinfo/adslmib Info: https://www1.ietf.org/mailman/listinfo/adslmib
Chair: Mike Sneed Chair: Mike Sneed
Sand Channel Systems Sand Channel Systems
Postal: P.O. Box 37324 Postal: P.O. Box 37324
Raleigh NC 27627-732 Raleigh NC 27627-732
Email: sneedmike@hotmail.com Email: sneedmike@hotmail.com
Phone: +1 206 600 7022 Phone: +1 206 600 7022
skipping to change at page 24, line 36 skipping to change at page 26, line 46
Co-editor: Umberto Bonollo Co-editor: Umberto Bonollo
NEC Australia NEC Australia
Postal: 649-655 Springvale Road, Postal: 649-655 Springvale Road,
Mulgrave, Victoria 3170, Mulgrave, Victoria 3170,
Australia. Australia.
Email: umberto.bonollo@nec.com.au Email: umberto.bonollo@nec.com.au
Phone: +61 3 9264 3385 Phone: +61 3 9264 3385
" "
DESCRIPTION DESCRIPTION
"This MIB Module provides Textual Conventions to be "This MIB Module provides Textual Conventions to be
used by the NGDSL-LINE-MIB module for the purpose of used by the ADSL2-LINE-MIB module for the purpose of
managing ADSL, ADSL2 and ADSL2+ lines. managing ADSL, ADSL2 and ADSL2+ lines.
Copyright (C) The Internet Society (2005). This version of Copyright (C) The Internet Society (2006). This version of
this MIB module is part of RFC XXXX: see the RFC itself for this MIB module is part of RFC XXXX: see the RFC itself for
full legal notices." full legal notices."
-- RFC Ed.: replace XXXX with assigned number & remove this note -- RFC Ed.: replace XXXX with assigned number & remove this note
REVISION "200510090000Z" -- October 09, 2005 REVISION "200601150000Z" -- January 15, 2006
DESCRIPTION "Initial version, published as RFC XXXX." DESCRIPTION "Initial version, published as RFC XXXX."
-- RFC Ed.: replace XX with assigned number & remove this note -- RFC Ed.: replace XX with assigned number & remove this note
::= { transmission xxx } ::= { transmission xxx 2} -- adsl2MIB 2
-- RFC Ed.: we suggest to put it under { transmission 230 } because -- RFC Ed.: we suggest to put it under { transmission 230 } because
-- this is the first available number. -- this is the first available number.
------------------------------------------------ ------------------------------------------------
-- Textual Conventions -- -- Textual Conventions --
------------------------------------------------ ------------------------------------------------
Adsl2Unit ::= TEXTUAL-CONVENTION Adsl2Unit ::= TEXTUAL-CONVENTION
STATUS current STATUS current
DESCRIPTION DESCRIPTION
skipping to change at page 36, line 48 skipping to change at page 39, line 16
reports that no defect or failure exist. reports that no defect or failure exist.
outOfSync (1) - Out of synchronization. " outOfSync (1) - Out of synchronization. "
SYNTAX BITS { SYNTAX BITS {
noDefect(0), noDefect(0),
outOfSync(1) outOfSync(1)
} }
END END
NGDSL-LINE-MIB DEFINITIONS ::= BEGIN ADSL2-LINE-MIB DEFINITIONS ::= BEGIN
IMPORTS IMPORTS
MODULE-IDENTITY, MODULE-IDENTITY,
OBJECT-TYPE, OBJECT-TYPE,
transmission, transmission,
Unsigned32, Unsigned32,
NOTIFICATION-TYPE, NOTIFICATION-TYPE,
Integer32, Integer32,
Counter32 Counter32
FROM SNMPv2-SMI FROM SNMPv2-SMI
skipping to change at page 37, line 51 skipping to change at page 40, line 19
Adsl2ScMaskDs, Adsl2ScMaskDs,
Adsl2ScMaskUs, Adsl2ScMaskUs,
Adsl2RfiDs, Adsl2RfiDs,
Adsl2PsdMaskDs, Adsl2PsdMaskDs,
Adsl2PsdMaskUs, Adsl2PsdMaskUs,
Adsl2Tssi, Adsl2Tssi,
Adsl2LastTransmittedState, Adsl2LastTransmittedState,
Adsl2LineStatus, Adsl2LineStatus,
Adsl2ChAtmStatus, Adsl2ChAtmStatus,
Adsl2ChPtmStatus Adsl2ChPtmStatus
FROM NGDSL-LINE-TC-MIB -- [This document] FROM ADSL2-LINE-TC-MIB -- [This document]
MODULE-COMPLIANCE, MODULE-COMPLIANCE,
OBJECT-GROUP, OBJECT-GROUP,
NOTIFICATION-GROUP NOTIFICATION-GROUP
FROM SNMPv2-CONF; FROM SNMPv2-CONF;
ngdslMIB MODULE-IDENTITY adsl2MIB MODULE-IDENTITY
LAST-UPDATED "200510090000Z" -- October 09, 2005 LAST-UPDATED "200601150000Z" -- January 15, 2006
ORGANIZATION "ADSLMIB Working Group" ORGANIZATION "ADSLMIB Working Group"
CONTACT-INFO "WG-email: adslmib@ietf.org CONTACT-INFO "WG-email: adslmib@ietf.org
Info: https://www1.ietf.org/mailman/listinfo/adslmib Info: https://www1.ietf.org/mailman/listinfo/adslmib
Chair: Mike Sneed Chair: Mike Sneed
Sand Channel Systems Sand Channel Systems
Postal: P.O. Box 37324 Postal: P.O. Box 37324
Raleigh NC 27627-732 Raleigh NC 27627-732
Email: sneedmike@hotmail.com Email: sneedmike@hotmail.com
Phone: +1 206 600 7022 Phone: +1 206 600 7022
skipping to change at page 40, line 5 skipping to change at page 42, line 21
Note that the revised ITU-T G.997.1 standard refers also to Note that the revised ITU-T G.997.1 standard refers also to
next generation of VDSL technology, known as VDSL2, per ITU-T next generation of VDSL technology, known as VDSL2, per ITU-T
G.993.2 [G.993.2]. However, managing VDSL2 lines is G.993.2 [G.993.2]. However, managing VDSL2 lines is
currently beyond the scope of this document. currently beyond the scope of this document.
The MIB module is located in the MIB tree under MIB 2 The MIB module is located in the MIB tree under MIB 2
transmission, as discussed in the MIB-2 Integration (RFC 2863 transmission, as discussed in the MIB-2 Integration (RFC 2863
[RFC2863]) section of this document. [RFC2863]) section of this document.
Copyright (C) The Internet Society (2005). This version of Copyright (C) The Internet Society (2006). This version of
this MIB module is part of RFC XXXX: see the RFC itself for this MIB module is part of RFC XXXX: see the RFC itself for
full legal notices." full legal notices."
-- RFC Ed.: replace XXXX with assigned number & remove this note -- RFC Ed.: replace XXXX with assigned number & remove this note
REVISION "200510090000Z" -- October 09, 2005 REVISION "200601150000Z" -- January 15, 2006
DESCRIPTION "Initial version, published as RFC XXXX." DESCRIPTION "Initial version, published as RFC XXXX."
-- RFC Ed.: replace XX with assigned number & remove this note -- RFC Ed.: replace XX with assigned number & remove this note
::= { transmission xxx } ::= { transmission xxx }
-- RFC Ed.: we suggest to put it under { transmission 231 } because -- RFC Ed.: we suggest to put it under { transmission 230 } because
-- this is the first available number. -- this is the first available number.
adsl2 OBJECT IDENTIFIER ::= { ngdslMIB 1 } adsl2 OBJECT IDENTIFIER ::= { adsl2MIB 1 }
------------------------------------------------ ------------------------------------------------
adsl2Line OBJECT IDENTIFIER ::= { adsl2 1 } adsl2Line OBJECT IDENTIFIER ::= { adsl2 1 }
adsl2Status OBJECT IDENTIFIER ::= { adsl2 2 } adsl2Status OBJECT IDENTIFIER ::= { adsl2 2 }
adsl2Inventory OBJECT IDENTIFIER ::= { adsl2 3 } adsl2Inventory OBJECT IDENTIFIER ::= { adsl2 3 }
adsl2PM OBJECT IDENTIFIER ::= { adsl2 4 } adsl2PM OBJECT IDENTIFIER ::= { adsl2 4 }
adsl2Profile OBJECT IDENTIFIER ::= { adsl2 5 } adsl2Profile OBJECT IDENTIFIER ::= { adsl2 5 }
adsl2Scalar OBJECT IDENTIFIER ::= { adsl2 6 } adsl2Scalar OBJECT IDENTIFIER ::= { adsl2 6 }
adsl2Notifications OBJECT IDENTIFIER ::= { adsl2 0 } adsl2Notifications OBJECT IDENTIFIER ::= { adsl2 0 }
adsl2Conformance OBJECT IDENTIFIER ::= { adsl2 8 } adsl2Conformance OBJECT IDENTIFIER ::= { adsl2 8 }
------------------------------------------------ ------------------------------------------------
skipping to change at page 40, line 49 skipping to change at page 43, line 18
-- adsl2LineTable -- -- adsl2LineTable --
------------------------------------------------ ------------------------------------------------
adsl2LineTable OBJECT-TYPE adsl2LineTable OBJECT-TYPE
SYNTAX SEQUENCE OF Adsl2LineEntry SYNTAX SEQUENCE OF Adsl2LineEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table adsl2LineTable contains configuration, "The table adsl2LineTable contains configuration,
command and status parameters of the ADSL2 line. command and status parameters of the ADSL2 line.
The index of this table is an interface index where the The index of this table is an interface index where the
interface has an ifType of adsl2(230)." interface has an ifType of adsl2(230).
Several objects in this table MUST be maintained in a
persistent manner. "
::= { adsl2Line 1 } ::= { adsl2Line 1 }
adsl2LineEntry OBJECT-TYPE adsl2LineEntry OBJECT-TYPE
SYNTAX Adsl2LineEntry SYNTAX Adsl2LineEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table adsl2LineTable contains configuration, "The table adsl2LineTable contains configuration,
commands and status parameters of the ADSL2 line" commands and status parameters of the ADSL2 line"
INDEX { ifIndex } INDEX { ifIndex }
::= { adsl2LineTable 1 } ::= { adsl2LineTable 1 }
skipping to change at page 41, line 50 skipping to change at page 44, line 23
adsl2LineStatusActAtpUs Integer32 adsl2LineStatusActAtpUs Integer32
} }
adsl2LineCnfgTemplate OBJECT-TYPE adsl2LineCnfgTemplate OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32)) SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The value of this object identifies the row in the ADSL2 Line "The value of this object identifies the row in the ADSL2 Line
Configuration Templates Table, (Adsl2ConfTemplatesTable), Configuration Templates Table, (Adsl2ConfTemplatesTable),
which applies for this ADSL2 line." which applies for this ADSL2 line.
This object MUST be maintained in a persistent manner."
REFERENCE "DSL Forum TR-90, paragraph 5.1.1" REFERENCE "DSL Forum TR-90, paragraph 5.1.1"
DEFVAL { "DEFVAL" } DEFVAL { "DEFVAL" }
::= { adsl2LineEntry 1 } ::= { adsl2LineEntry 1 }
adsl2LineAlarmCnfgTemplate OBJECT-TYPE adsl2LineAlarmCnfgTemplate OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32)) SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The value of this object identifies the row in the ADSL2 Line "The value of this object identifies the row in the ADSL2 Line
Alarm Configuration Template Table, Alarm Configuration Template Table,
(adsl2LineAlarmConfTemplateTable), which applies to this ADSL2 (adsl2LineAlarmConfTemplateTable), which applies to this ADSL2
line." line.
This object MUST be maintained in a persistent manner."
REFERENCE "DSL Forum TR-90, paragraph 5.1.1" REFERENCE "DSL Forum TR-90, paragraph 5.1.1"
DEFVAL { "DEFVAL" } DEFVAL { "DEFVAL" }
::= { adsl2LineEntry 2 } ::= { adsl2LineEntry 2 }
adsl2LineCmndConfPmsf OBJECT-TYPE adsl2LineCmndConfPmsf OBJECT-TYPE
SYNTAX Adsl2ConfPmsForce SYNTAX Adsl2ConfPmsForce
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Power management state forced. Defines the line states to be "Power management state forced. Defines the line states to be
forced by the near-end ATU on this line. The various possible forced by the near-end ATU on this line. The various possible
values are: values are:
l3toL0 (0), l3toL0 (0),
l0toL2 (2), l0toL2 (2),
l0orL2toL3 (3)." l0orL2toL3 (3).
This object MUST be maintained in a persistent manner."
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.1.3" REFERENCE "ITU-T G.997.1, paragraph 7.3.1.1.3"
DEFVAL { l3toL0 } DEFVAL { l3toL0 }
::= { adsl2LineEntry 3 } ::= { adsl2LineEntry 3 }
adsl2LineCmndConfLdsf OBJECT-TYPE adsl2LineCmndConfLdsf OBJECT-TYPE
SYNTAX Adsl2LineLdsf SYNTAX Adsl2LineLdsf
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Loop diagnostics mode forced (LDSF). Defines whether the line "Loop diagnostics mode forced (LDSF). Defines whether the line
should be forced into the loop diagnostics mode by the should be forced into the loop diagnostics mode by the
near-end ATU on this line or only be responsive to loop near-end ATU on this line or only be responsive to loop
diagnostics initiated by the far-end ATU. " diagnostics initiated by the far-end ATU.
This object MUST be maintained in a persistent manner.
However, in case the operator forces loop diagnostics mode
then the access node should reset the object (inhibit) when
loop diagnostics mode procedures are completed."
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.1.8" REFERENCE "ITU-T G.997.1, paragraph 7.3.1.1.8"
DEFVAL { inhibit } DEFVAL { inhibit }
::= { adsl2LineEntry 4 } ::= { adsl2LineEntry 4 }
adsl2LineCmndConfLdsfFailReason OBJECT-TYPE adsl2LineCmndConfLdsfFailReason OBJECT-TYPE
SYNTAX Adsl2LdsfResult SYNTAX Adsl2LdsfResult
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The status of the recent occasion the Loop diagnostics mode "The status of the recent occasion the Loop diagnostics mode
skipping to change at page 44, line 7 skipping to change at page 46, line 40
used for automode and for shortening G.994.1 handshake used for automode and for shortening G.994.1 handshake
and initialization. and initialization.
Automode is the case where multiple operation-modes are Automode is the case where multiple operation-modes are
enabled through the adsl2LConfProfAtuTransSysEna object enabled through the adsl2LConfProfAtuTransSysEna object
in the line configuration profile being used for the in the line configuration profile being used for the
ADSL line, and where the selection of the actual ADSL line, and where the selection of the actual
operation-mode depends not only on the common operation-mode depends not only on the common
capabilities of both ATUs (as exchanged in G.994.1), but capabilities of both ATUs (as exchanged in G.994.1), but
also on achievable data rates under given loop also on achievable data rates under given loop
conditions. " conditions.
This object MUST be maintained in a persistent manner."
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.1.10" REFERENCE "ITU-T G.997.1, paragraph 7.3.1.1.10"
DEFVAL { false } DEFVAL { false }
::= { adsl2LineEntry 6 } ::= { adsl2LineEntry 6 }
adsl2LineStatusAtuTransSys OBJECT-TYPE adsl2LineStatusAtuTransSys OBJECT-TYPE
SYNTAX Adsl2TransmissionModeType SYNTAX Adsl2TransmissionModeType
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The ATU Transmission System (ATS) in use. "The ATU Transmission System (ATS) in use.
skipping to change at page 49, line 47 skipping to change at page 52, line 34
------------------------------------------------ ------------------------------------------------
-- adsl2ChannelStatusTable -- -- adsl2ChannelStatusTable --
------------------------------------------------ ------------------------------------------------
adsl2ChannelStatusTable OBJECT-TYPE adsl2ChannelStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF Adsl2ChannelStatusEntry SYNTAX SEQUENCE OF Adsl2ChannelStatusEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table adsl2ChannelStatusTable contains status "The table adsl2ChannelStatusTable contains status
parameters of ADSL2 channel." parameters of ADSL2 channel. This table contains live data
from equipment. As such, it is NOT persistent."
::= { adsl2Status 1 } ::= { adsl2Status 1 }
adsl2ChannelStatusEntry OBJECT-TYPE adsl2ChannelStatusEntry OBJECT-TYPE
SYNTAX Adsl2ChannelStatusEntry SYNTAX Adsl2ChannelStatusEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table adsl2ChannelStatusTable contains status "The table adsl2ChannelStatusTable contains status
parameters of ADSL2 channel. parameters of ADSL2 channel.
The index of this table is an interface index where The index of this table is an interface index where
skipping to change at page 53, line 4 skipping to change at page 55, line 40
DESCRIPTION DESCRIPTION
"This value determines the amount of space that is "This value determines the amount of space that is
currently available in adsl2SCStatusTable. currently available in adsl2SCStatusTable.
The number of entries available in adsl2SCStatusTable is equal The number of entries available in adsl2SCStatusTable is equal
to two times the value of this attribute." to two times the value of this attribute."
::= { adsl2ScalarSC 2 } ::= { adsl2ScalarSC 2 }
------------------------------------------------ ------------------------------------------------
-- adsl2SCStatusTable -- -- adsl2SCStatusTable --
------------------------------------------------ ------------------------------------------------
adsl2SCStatusTable OBJECT-TYPE adsl2SCStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF Adsl2SCStatusEntry SYNTAX SEQUENCE OF Adsl2SCStatusEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table adsl2SCStatusTable contains status parameters "The table adsl2SCStatusTable contains status parameters
of ADSL2 sub-carriers." of ADSL2 sub-carriers. This table contains live data
from equipment. As such, it is NOT persistent."
::= { adsl2Status 2 } ::= { adsl2Status 2 }
adsl2SCStatusEntry OBJECT-TYPE adsl2SCStatusEntry OBJECT-TYPE
SYNTAX Adsl2SCStatusEntry SYNTAX Adsl2SCStatusEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table Hfadsl2SCStatusEntry contains status parameters "The table Hfadsl2SCStatusEntry contains status parameters
of ADSL2 sub-carriers. of ADSL2 sub-carriers.
The index of this table is an interface index where the The index of this table is an interface index where the
skipping to change at page 62, line 20 skipping to change at page 65, line 9
------------------------------------------------ ------------------------------------------------
-- adsl2LineInventoryTable -- -- adsl2LineInventoryTable --
------------------------------------------------ ------------------------------------------------
adsl2LineInventoryTable OBJECT-TYPE adsl2LineInventoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF Adsl2LineInventoryEntry SYNTAX SEQUENCE OF Adsl2LineInventoryEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table adsl2LineInventoryTable contains inventory of ADSL2 "The table adsl2LineInventoryTable contains inventory of ADSL2
unit." unit. The objects in this table are NOT persistent."
::= { adsl2Inventory 1 } ::= { adsl2Inventory 1 }
adsl2LineInventoryEntry OBJECT-TYPE adsl2LineInventoryEntry OBJECT-TYPE
SYNTAX Adsl2LineInventoryEntry SYNTAX Adsl2LineInventoryEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table adsl2LineInventoryTable contains inventory of ADSL2 "The table adsl2LineInventoryTable contains inventory of ADSL2
unit. unit.
The index of this table is an interface index where the The index of this table is an interface index where the
skipping to change at page 64, line 44 skipping to change at page 67, line 33
------------------------------------------------ ------------------------------------------------
-- adsl2LineConfTemplateTable -- -- adsl2LineConfTemplateTable --
------------------------------------------------ ------------------------------------------------
adsl2LineConfTemplateTable OBJECT-TYPE adsl2LineConfTemplateTable OBJECT-TYPE
SYNTAX SEQUENCE OF Adsl2LineConfTemplateEntry SYNTAX SEQUENCE OF Adsl2LineConfTemplateEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table adsl2LineConfTemplateTable contains ADSL2 line "The table adsl2LineConfTemplateTable contains ADSL2 line
configuration template." configuration template.
Entries in this table MUST be maintained in a
persistent manner."
::= { adsl2ProfileLine 1 } ::= { adsl2ProfileLine 1 }
adsl2LineConfTemplateEntry OBJECT-TYPE adsl2LineConfTemplateEntry OBJECT-TYPE
SYNTAX Adsl2LineConfTemplateEntry SYNTAX Adsl2LineConfTemplateEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table adsl2LineConfTemplateTable contains ADSL2 line "The table adsl2LineConfTemplateTable contains ADSL2 line
configuration template. configuration template.
A default template with an index of 'DEFVAL' will A default template with an index of 'DEFVAL' will
skipping to change at page 70, line 39 skipping to change at page 73, line 32
::= { adsl2LineConfTemplateEntry 14 } ::= { adsl2LineConfTemplateEntry 14 }
adsl2LConfTempRowStatus OBJECT-TYPE adsl2LConfTempRowStatus OBJECT-TYPE
SYNTAX RowStatus SYNTAX RowStatus
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object is used to create a new row or to modify or "This object is used to create a new row or to modify or
delete an existing row in this table. delete an existing row in this table.
A profile is activated by setting this object to 'active'. A template is activated by setting this object to 'active'.
When 'active' is set, the system will validate the profile. When 'active' is set, the system will validate the template.
Template modification is prohibited while this object is set
to 'active'.
Before a profile can be deleted or taken out of service Before a template can be deleted or taken out of service
(by setting this object to 'destroy' or 'outOfService'), (by setting this object to 'destroy' or 'notInService'),
it must be first unreferenced from all associated it must be first unreferenced from all associated
lines." lines."
::= { adsl2LineConfTemplateEntry 15 } ::= { adsl2LineConfTemplateEntry 15 }
------------------------------------------ ------------------------------------------
-- adsl2LineConfProfTable -- -- adsl2LineConfProfTable --
------------------------------------------ ------------------------------------------
adsl2LineConfProfTable OBJECT-TYPE adsl2LineConfProfTable OBJECT-TYPE
SYNTAX SEQUENCE OF Adsl2LineConfProfEntry SYNTAX SEQUENCE OF Adsl2LineConfProfEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table adsl2LineConfProfTable contains ADSL2 line profile "The table adsl2LineConfProfTable contains ADSL2 line profile
configuration." configuration.
Entries in this table MUST be maintained in a
persistent manner."
::= { adsl2ProfileLine 2 } ::= { adsl2ProfileLine 2 }
adsl2LineConfProfEntry OBJECT-TYPE adsl2LineConfProfEntry OBJECT-TYPE
SYNTAX Adsl2LineConfProfEntry SYNTAX Adsl2LineConfProfEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table adsl2LineConfProfTable contains ADSL2 line profile "The table adsl2LineConfProfTable contains ADSL2 line profile
configuration. configuration.
skipping to change at page 81, line 26 skipping to change at page 84, line 28
adsl2LConfProfRowStatus OBJECT-TYPE adsl2LConfProfRowStatus OBJECT-TYPE
SYNTAX RowStatus SYNTAX RowStatus
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object is used to create a new row or to modify or "This object is used to create a new row or to modify or
delete an existing row in this table. delete an existing row in this table.
A profile is activated by setting this object to 'active'. A profile is activated by setting this object to 'active'.
When 'active' is set, the system will validate the profile. When 'active' is set, the system will validate the profile.
Profile modification is prohibited while this object is set
to 'active'.
Before a profile can be deleted or taken out of service Before a profile can be deleted or taken out of service
(by setting this object to 'destroy' or 'outOfService'), (by setting this object to 'destroy' or 'notInService'),
it must be first unreferenced from all associated it must be first unreferenced from all associated
templates." templates."
::= { adsl2LineConfProfEntry 29 } ::= { adsl2LineConfProfEntry 29 }
------------------------------------------ ------------------------------------------
-- adsl2LineConfProfModeSpecTable -- -- adsl2LineConfProfModeSpecTable --
------------------------------------------ ------------------------------------------
adsl2LineConfProfModeSpecTable OBJECT-TYPE adsl2LineConfProfModeSpecTable OBJECT-TYPE
SYNTAX SEQUENCE OF Adsl2LineConfProfModeSpecEntry SYNTAX SEQUENCE OF Adsl2LineConfProfModeSpecEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
skipping to change at page 82, line 20 skipping to change at page 85, line 25
rejected by the SNMP agent. rejected by the SNMP agent.
The manager MAY create an 'optional' row in this table The manager MAY create an 'optional' row in this table
using the adsl2LConfProfModeSpecRowStatus attribute if using the adsl2LConfProfModeSpecRowStatus attribute if
the parent row exists. the parent row exists.
The manager MAY delete an 'optional' row in this table The manager MAY delete an 'optional' row in this table
using the adsl2LConfProfModeSpecRowStatus attribute at using the adsl2LConfProfModeSpecRowStatus attribute at
any time. any time.
If the actual transmission mode of a DSL line does not If the actual transmission mode of a DSL line does not
match one of the 'optional' rows in this table, then match one of the 'optional' rows in this table, then
the line will use the PSD configuration from the the line will use the PSD configuration from the
'mandatory' row." 'mandatory' row.
Entries in this table MUST be maintained in a
persistent manner."
::= { adsl2ProfileLine 3 } ::= { adsl2ProfileLine 3 }
adsl2LineConfProfModeSpecEntry OBJECT-TYPE adsl2LineConfProfModeSpecEntry OBJECT-TYPE
SYNTAX Adsl2LineConfProfModeSpecEntry SYNTAX Adsl2LineConfProfModeSpecEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table adsl2LineConfProfModeSpecTable extends the "The table adsl2LineConfProfModeSpecTable extends the
ADSL2 line configuration profile by ADSL Mode Specific ADSL2 line configuration profile by ADSL Mode Specific
parameters." parameters."
skipping to change at page 86, line 28 skipping to change at page 89, line 36
SYNTAX RowStatus SYNTAX RowStatus
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object is used to create a new row or to modify or "This object is used to create a new row or to modify or
delete an existing row in this table. delete an existing row in this table.
A profile is activated by setting this object to 'active'. A profile is activated by setting this object to 'active'.
When 'active' is set, the system will validate the profile. When 'active' is set, the system will validate the profile.
Profile modification is prohibited while this object is set
to 'active'.
Before a profile can be deleted or taken out of service Before a profile can be deleted or taken out of service
(by setting this object to 'destroy' or 'outOfService'), (by setting this object to 'destroy' or 'notInService'),
it must be first unreferenced from all associated it must be first unreferenced from all associated
templates." templates."
::= { adsl2LineConfProfModeSpecEntry 10 } ::= { adsl2LineConfProfModeSpecEntry 10 }
------------------------------------------------ ------------------------------------------------
-- adsl2ChConfProfileTable -- -- adsl2ChConfProfileTable --
------------------------------------------------ ------------------------------------------------
adsl2ChConfProfileTable OBJECT-TYPE adsl2ChConfProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF Adsl2ChConfProfileEntry SYNTAX SEQUENCE OF Adsl2ChConfProfileEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table adsl2ChConfProfileTable contains ADSL2 channel "The table adsl2ChConfProfileTable contains ADSL2 channel
profile configuration." profile configuration.
Entries in this table MUST be maintained in a
persistent manner."
::= { adsl2ProfileChannel 1 } ::= { adsl2ProfileChannel 1 }
adsl2ChConfProfileEntry OBJECT-TYPE adsl2ChConfProfileEntry OBJECT-TYPE
SYNTAX Adsl2ChConfProfileEntry SYNTAX Adsl2ChConfProfileEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table adsl2ChConfProfileTable contains ADSL2 channel "The table adsl2ChConfProfileTable contains ADSL2 channel
profile configuration. profile configuration.
A default profile with an index of 'DEFVAL' will A default profile with an index of 'DEFVAL' will
skipping to change at page 87, line 23 skipping to change at page 90, line 35
Adsl2ChConfProfileEntry ::= Adsl2ChConfProfileEntry ::=
SEQUENCE { SEQUENCE {
adsl2ChConfProfProfileName SnmpAdminString, adsl2ChConfProfProfileName SnmpAdminString,
adsl2ChConfProfMinDataRateDs Unsigned32, adsl2ChConfProfMinDataRateDs Unsigned32,
adsl2ChConfProfMinDataRateUs Unsigned32, adsl2ChConfProfMinDataRateUs Unsigned32,
adsl2ChConfProfMinResDataRateDs Unsigned32, adsl2ChConfProfMinResDataRateDs Unsigned32,
adsl2ChConfProfMinResDataRateUs Unsigned32, adsl2ChConfProfMinResDataRateUs Unsigned32,
adsl2ChConfProfMaxDataRateDs Unsigned32, adsl2ChConfProfMaxDataRateDs Unsigned32,
adsl2ChConfProfMaxDataRateUs Unsigned32, adsl2ChConfProfMaxDataRateUs Unsigned32,
adsl2ChConfProfMinDataRateLowPwrDs Unsigned32, adsl2ChConfProfMinDataRateLowPwrDs Unsigned32,
adsl2ChConfProfMinDataRateLowPwrUs Unsigned32,
adsl2ChConfProfMaxDelayDs Unsigned32, adsl2ChConfProfMaxDelayDs Unsigned32,
adsl2ChConfProfMaxDelayUs Unsigned32, adsl2ChConfProfMaxDelayUs Unsigned32,
adsl2ChConfProfMinProtectionDs Adsl2SymbolProtection, adsl2ChConfProfMinProtectionDs Adsl2SymbolProtection,
adsl2ChConfProfMinProtectionUs Adsl2SymbolProtection, adsl2ChConfProfMinProtectionUs Adsl2SymbolProtection,
adsl2ChConfProfMaxBerDs Adsl2MaxBer, adsl2ChConfProfMaxBerDs Adsl2MaxBer,
adsl2ChConfProfMaxBerUs Adsl2MaxBer, adsl2ChConfProfMaxBerUs Adsl2MaxBer,
adsl2ChConfProfUsDataRateDs Unsigned32, adsl2ChConfProfUsDataRateDs Unsigned32,
adsl2ChConfProfDsDataRateDs Unsigned32, adsl2ChConfProfDsDataRateDs Unsigned32,
adsl2ChConfProfUsDataRateUs Unsigned32, adsl2ChConfProfUsDataRateUs Unsigned32,
adsl2ChConfProfDsDataRateUs Unsigned32, adsl2ChConfProfDsDataRateUs Unsigned32,
skipping to change at page 89, line 35 skipping to change at page 92, line 46
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Minimum Data Rate in Low Power state on Downstream direction. "Minimum Data Rate in Low Power state on Downstream direction.
The minimum net data rate for the bearer channel, coded in The minimum net data rate for the bearer channel, coded in
bit/s., during the low power state (L1 in G.992.2, L2 in bit/s., during the low power state (L1 in G.992.2, L2 in
G.992.3)." G.992.3)."
REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1" REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1"
::= { adsl2ChConfProfileEntry 8 } ::= { adsl2ChConfProfileEntry 8 }
adsl2ChConfProfMinDataRateLowPwrUs OBJECT-TYPE
SYNTAX Unsigned32(0..200000000)
UNITS "bits/second"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Minimum Data Rate in Low Power state on Upstream direction.
The minimum net data rate for the bearer channel, coded in
bit/s., during the low power state (L1 in G.992.2, L2 in
G.992.3)."
REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1"
::= { adsl2ChConfProfileEntry 9 }
adsl2ChConfProfMaxDelayDs OBJECT-TYPE adsl2ChConfProfMaxDelayDs OBJECT-TYPE
SYNTAX Unsigned32(0..63) SYNTAX Unsigned32(0..63)
UNITS "milliseconds" UNITS "milliseconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Maximum Interleave Delay on Downstream direction. The maximum "Maximum Interleave Delay on Downstream direction. The maximum
one-way interleaving delay introduced by the PMS-TC on one-way interleaving delay introduced by the PMS-TC on
Downstream direction. The ATUs shall choose the S (factor) Downstream direction. The ATUs shall choose the S (factor)
and D (depth) values such that the actual one-way interleaving and D (depth) values such that the actual one-way interleaving
delay (Adsl2ChanStatusActDelay) is as close as possible to, delay (Adsl2ChanStatusActDelay) is as close as possible to,
but less than or equal to, Adsl2ChanConfMaxDelayDs. The but less than or equal to, Adsl2ChanConfMaxDelayDs. The
delay is coded in ms, with the value 0 indicating no delay delay is coded in ms, with the value 0 indicating no delay
bound is being imposed." bound is being imposed."
REFERENCE "ITU-T G.997.1, paragraph 7.3.2.2" REFERENCE "ITU-T G.997.1, paragraph 7.3.2.2"
::= { adsl2ChConfProfileEntry 10 } ::= { adsl2ChConfProfileEntry 9 }
adsl2ChConfProfMaxDelayUs OBJECT-TYPE adsl2ChConfProfMaxDelayUs OBJECT-TYPE
SYNTAX Unsigned32(0..63) SYNTAX Unsigned32(0..63)
UNITS "milliseconds" UNITS "milliseconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Maximum Interleave Delay on Upstream direction. The maximum "Maximum Interleave Delay on Upstream direction. The maximum
one-way interleaving delay introduced by the PMS-TC on one-way interleaving delay introduced by the PMS-TC on
Upstream direction. The ATUs shall choose the S (factor) and Upstream direction. The ATUs shall choose the S (factor) and
D (depth) values such that the actual one-way interleaving D (depth) values such that the actual one-way interleaving
delay (Adsl2ChanStatusActDelay) is as close as possible to, delay (Adsl2ChanStatusActDelay) is as close as possible to,
but less than or equal to, Adsl2ChanConfMaxDelayUs. The but less than or equal to, Adsl2ChanConfMaxDelayUs. The
delay is coded in ms, with the value 0 indicating no delay delay is coded in ms, with the value 0 indicating no delay
bound is being imposed." bound is being imposed."
REFERENCE "ITU-T G.997.1, paragraph 7.3.2.2" REFERENCE "ITU-T G.997.1, paragraph 7.3.2.2"
::= { adsl2ChConfProfileEntry 11 } ::= { adsl2ChConfProfileEntry 10 }
adsl2ChConfProfMinProtectionDs OBJECT-TYPE adsl2ChConfProfMinProtectionDs OBJECT-TYPE
SYNTAX Adsl2SymbolProtection SYNTAX Adsl2SymbolProtection
UNITS "symbols" UNITS "symbols"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Minimum Impulse Noise Protection on Downstream direction. The "Minimum Impulse Noise Protection on Downstream direction. The
minimum impulse noise protection for the bearer channel, minimum impulse noise protection for the bearer channel,
expressed in symbols. The parameter can take the following expressed in symbols. The parameter can take the following
values: noProtection (i.e., INP not required), halfSymbol values: noProtection (i.e., INP not required), halfSymbol
(i.e., INP length is 1/2 symbol) and 1-16 symbols in steps (i.e., INP length is 1/2 symbol) and 1-16 symbols in steps
of 1 symbol." of 1 symbol."
REFERENCE "ITU-T G.997.1, paragraph 7.3.2.3" REFERENCE "ITU-T G.997.1, paragraph 7.3.2.3"
DEFVAL { noProtection } DEFVAL { noProtection }
::= { adsl2ChConfProfileEntry 12 } ::= { adsl2ChConfProfileEntry 11 }
adsl2ChConfProfMinProtectionUs OBJECT-TYPE adsl2ChConfProfMinProtectionUs OBJECT-TYPE
SYNTAX Adsl2SymbolProtection SYNTAX Adsl2SymbolProtection
UNITS "symbols" UNITS "symbols"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Minimum Impulse Noise Protection on Upstream direction. The "Minimum Impulse Noise Protection on Upstream direction. The
minimum impulse noise protection for the bearer channel, minimum impulse noise protection for the bearer channel,
expressed in symbols. The parameter can take the following expressed in symbols. The parameter can take the following
values: values:
noProtection (1), noProtection (1),
halfSymbol (2), halfSymbol (2),
singleSymbol (3), singleSymbol (3),
twoSymbols (4), twoSymbols (4),
fourSymbols (5), fourSymbols (5),
eightSymbols (6), eightSymbols (6),
sixteenSymbols (7)." sixteenSymbols (7)."
REFERENCE "ITU-T G.997.1, paragraph 7.3.2.3" REFERENCE "ITU-T G.997.1, paragraph 7.3.2.3"
DEFVAL { noProtection } DEFVAL { noProtection }
::= { adsl2ChConfProfileEntry 13 } ::= { adsl2ChConfProfileEntry 12 }
adsl2ChConfProfMaxBerDs OBJECT-TYPE adsl2ChConfProfMaxBerDs OBJECT-TYPE
SYNTAX Adsl2MaxBer SYNTAX Adsl2MaxBer
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Maximum Bit Error Ratio on Downstream direction. The maximum "Maximum Bit Error Ratio on Downstream direction. The maximum
bit error ratio for the bearer channel. The parameter can bit error ratio for the bearer channel. The parameter can
take the following values (for 1E-3, 1E-5 or 1E-7): take the following values (for 1E-3, 1E-5 or 1E-7):
eminus3 (1), eminus3 (1),
eminus5 (2), eminus5 (2),
eminus7 (3)" eminus7 (3)"
REFERENCE "ITU-T G.997.1, paragraph 7.3.2.4" REFERENCE "ITU-T G.997.1, paragraph 7.3.2.4"
DEFVAL { eminus5 } DEFVAL { eminus5 }
::= { adsl2ChConfProfileEntry 14 } ::= { adsl2ChConfProfileEntry 13 }
adsl2ChConfProfMaxBerUs OBJECT-TYPE adsl2ChConfProfMaxBerUs OBJECT-TYPE
SYNTAX Adsl2MaxBer SYNTAX Adsl2MaxBer
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Maximum Bit Error Ratio on Upstream direction. The maximum "Maximum Bit Error Ratio on Upstream direction. The maximum
bit error ratio for the bearer channel. The parameter can bit error ratio for the bearer channel. The parameter can
take the following values (for 1E-3, 1E-5 or 1E-7): take the following values (for 1E-3, 1E-5 or 1E-7):
eminus3 (1), eminus3 (1),
eminus5 (2), eminus5 (2),
eminus7 (3)" eminus7 (3)"
REFERENCE "ITU-T G.997.1, paragraph 7.3.2.4" REFERENCE "ITU-T G.997.1, paragraph 7.3.2.4"
DEFVAL { eminus5 } DEFVAL { eminus5 }
::= { adsl2ChConfProfileEntry 15 } ::= { adsl2ChConfProfileEntry 14 }
adsl2ChConfProfUsDataRateDs OBJECT-TYPE adsl2ChConfProfUsDataRateDs OBJECT-TYPE
SYNTAX Unsigned32(0..200000000) SYNTAX Unsigned32(0..200000000)
UNITS "bits/second" UNITS "bits/second"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Data Rate Threshold Up shift for downstream direction. An "Data Rate Threshold Up shift for downstream direction. An
'Up-shift rate change' event is triggered when the actual 'Up-shift rate change' event is triggered when the actual
downstream data rate exceeds, by more than the threshold, the downstream data rate exceeds, by more than the threshold, the
data rate at the last entry into Showtime. The parameter is data rate at the last entry into Showtime. The parameter is
coded in bit/s." coded in bit/s."
REFERENCE "ITU-T G.997.1, paragraph 7.3.2.6" REFERENCE "ITU-T G.997.1, paragraph 7.3.2.6"
::= { adsl2ChConfProfileEntry 16 } ::= { adsl2ChConfProfileEntry 15 }
adsl2ChConfProfDsDataRateDs OBJECT-TYPE adsl2ChConfProfDsDataRateDs OBJECT-TYPE
SYNTAX Unsigned32(0..200000000) SYNTAX Unsigned32(0..200000000)
UNITS "bits/second" UNITS "bits/second"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Data Rate Threshold Downshift for downstream direction. A "Data Rate Threshold Downshift for downstream direction. A
'Down-shift rate change' event is triggered when the actual 'Down-shift rate change' event is triggered when the actual
downstream data rate is below the data rate at the last entry downstream data rate is below the data rate at the last entry
into Showtime, by more than the threshold. The parameter is into Showtime, by more than the threshold. The parameter is
coded in bit/s." coded in bit/s."
REFERENCE "ITU-T G.997.1, paragraph 7.3.2.6" REFERENCE "ITU-T G.997.1, paragraph 7.3.2.6"
::= { adsl2ChConfProfileEntry 17 } ::= { adsl2ChConfProfileEntry 16 }
adsl2ChConfProfUsDataRateUs OBJECT-TYPE adsl2ChConfProfUsDataRateUs OBJECT-TYPE
SYNTAX Unsigned32(0..200000000) SYNTAX Unsigned32(0..200000000)
UNITS "bits/second" UNITS "bits/second"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Data Rate Threshold Up shift for upstream direction. An "Data Rate Threshold Up shift for upstream direction. An
'Up-shift rate change' event is triggered when the actual 'Up-shift rate change' event is triggered when the actual
upstream data rate exceeds, by more than the threshold, the upstream data rate exceeds, by more than the threshold, the
data rate at the last entry into Showtime. The parameter is data rate at the last entry into Showtime. The parameter is
coded in bit/s." coded in bit/s."
REFERENCE "ITU-T G.997.1, paragraph 7.3.2.6" REFERENCE "ITU-T G.997.1, paragraph 7.3.2.6"
::= { adsl2ChConfProfileEntry 18 } ::= { adsl2ChConfProfileEntry 17 }
adsl2ChConfProfDsDataRateUs OBJECT-TYPE adsl2ChConfProfDsDataRateUs OBJECT-TYPE
SYNTAX Unsigned32(0..200000000) SYNTAX Unsigned32(0..200000000)
UNITS "bits/second" UNITS "bits/second"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Data Rate Threshold Downshift for upstream direction. A "Data Rate Threshold Downshift for upstream direction. A
'Down-shift rate change' event is triggered when the actual 'Down-shift rate change' event is triggered when the actual
upstream data rate is below the data rate at the last entry upstream data rate is below the data rate at the last entry
into Showtime, by more than the threshold. The parameter is into Showtime, by more than the threshold. The parameter is
coded in bit/s." coded in bit/s."
REFERENCE "ITU-T G.997.1, paragraph 7.3.2.6" REFERENCE "ITU-T G.997.1, paragraph 7.3.2.6"
::= { adsl2ChConfProfileEntry 19 } ::= { adsl2ChConfProfileEntry 18 }
adsl2ChConfProfImaEnabled OBJECT-TYPE adsl2ChConfProfImaEnabled OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"IMA Mode Enable. The parameter enables the IMA operation mode "IMA Mode Enable. The parameter enables the IMA operation mode
in the ATM Data Path. Relevant only if the channel is of ATM in the ATM Data Path. Relevant only if the channel is of ATM
Data Path. When in 'enable' state, the ATM data path should Data Path. When in 'enable' state, the ATM data path should
comply with the requirements for IMA transmission." comply with the requirements for IMA transmission."
REFERENCE "ITU-T G.997.1, paragraph 7.3.4.1" REFERENCE "ITU-T G.997.1, paragraph 7.3.4.1"
DEFVAL { false } DEFVAL { false }
::= { adsl2ChConfProfileEntry 20 } ::= { adsl2ChConfProfileEntry 19 }
adsl2ChConfProfRowStatus OBJECT-TYPE adsl2ChConfProfRowStatus OBJECT-TYPE
SYNTAX RowStatus SYNTAX RowStatus
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object is used to create a new row or to modify or "This object is used to create a new row or to modify or
delete an existing row in this table. delete an existing row in this table.
A profile is activated by setting this object to 'active'. A profile is activated by setting this object to 'active'.
When 'active' is set, the system will validate the profile. When 'active' is set, the system will validate the profile.
Profile modification is prohibited while this object is set
to 'active'.
Before a profile can be deleted or taken out of service Before a profile can be deleted or taken out of service
(by setting this object to 'destroy' or 'outOfService'), (by setting this object to 'destroy' or 'notInService'),
it must be first unreferenced from all associated it must be first unreferenced from all associated
templates." templates."
::= { adsl2ChConfProfileEntry 21 } ::= { adsl2ChConfProfileEntry 20 }
------------------------------------------------ ------------------------------------------------
-- adsl2LineAlarmConfTemplateTable -- -- adsl2LineAlarmConfTemplateTable --
------------------------------------------------ ------------------------------------------------
adsl2LineAlarmConfTemplateTable OBJECT-TYPE adsl2LineAlarmConfTemplateTable OBJECT-TYPE
SYNTAX SEQUENCE OF Adsl2LineAlarmConfTemplateEntry SYNTAX SEQUENCE OF Adsl2LineAlarmConfTemplateEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table adsl2LineConfTemplateTable contains ADSL2 line "The table adsl2LineConfTemplateTable contains ADSL2 line
configuration template." configuration template.
Entries in this table MUST be maintained in a
persistent manner."
::= { adsl2ProfileAlarmConf 1 } ::= { adsl2ProfileAlarmConf 1 }
adsl2LineAlarmConfTemplateEntry OBJECT-TYPE adsl2LineAlarmConfTemplateEntry OBJECT-TYPE
SYNTAX Adsl2LineAlarmConfTemplateEntry SYNTAX Adsl2LineAlarmConfTemplateEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table adsl2LineAlarmConfTemplateTable contains ADSL2 "The table adsl2LineAlarmConfTemplateTable contains ADSL2
line PM thresholds template. line PM thresholds template.
A default template with an index of 'DEFVAL' will A default template with an index of 'DEFVAL' will
skipping to change at page 96, line 30 skipping to change at page 99, line 35
::= { adsl2LineAlarmConfTemplateEntry 6 } ::= { adsl2LineAlarmConfTemplateEntry 6 }
adsl2LAlarmConfTempRowStatus OBJECT-TYPE adsl2LAlarmConfTempRowStatus OBJECT-TYPE
SYNTAX RowStatus SYNTAX RowStatus
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object is used to create a new row or to modify or "This object is used to create a new row or to modify or
delete an existing row in this table. delete an existing row in this table.
A profile is activated by setting this object to 'active'. A template is activated by setting this object to 'active'.
When 'active' is set, the system will validate the profile. When 'active' is set, the system will validate the template.
Template modification is prohibited while this object is set
to 'active'.
Before a profile can be deleted or taken out of service Before a template can be deleted or taken out of service
(by setting this object to 'destroy' or 'outOfService'), (by setting this object to 'destroy' or 'notInService'),
it must be first unreferenced from all associated it must be first unreferenced from all associated
lines." lines."
::= { adsl2LineAlarmConfTemplateEntry 7 } ::= { adsl2LineAlarmConfTemplateEntry 7 }
------------------------------------------------ ------------------------------------------------
-- adsl2LineAlarmConfProfileTable -- -- adsl2LineAlarmConfProfileTable --
------------------------------------------------ ------------------------------------------------
adsl2LineAlarmConfProfileTable OBJECT-TYPE adsl2LineAlarmConfProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF Adsl2LineAlarmConfProfileEntry SYNTAX SEQUENCE OF Adsl2LineAlarmConfProfileEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table adsl2LineAlarmConfProfileTable contains ADSL2 "The table adsl2LineAlarmConfProfileTable contains ADSL2
line PM thresholds profiles." line PM thresholds profiles.
Entries in this table MUST be maintained in a
persistent manner."
::= { adsl2ProfileAlarmConf 2 } ::= { adsl2ProfileAlarmConf 2 }
adsl2LineAlarmConfProfileEntry OBJECT-TYPE adsl2LineAlarmConfProfileEntry OBJECT-TYPE
SYNTAX Adsl2LineAlarmConfProfileEntry SYNTAX Adsl2LineAlarmConfProfileEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table adsl2LineAlarmConfProfileTable contains ADSL2 "The table adsl2LineAlarmConfProfileTable contains ADSL2
line PM thresholds profiles. line PM thresholds profiles.
A default profile with an index of 'DEFVAL' will A default profile with an index of 'DEFVAL' will
always exist and its parameters will be set to vendor always exist and its parameters will be set to vendor
specific values, unless otherwise specified in this specific values, unless otherwise specified in this
skipping to change at page 101, line 40 skipping to change at page 104, line 50
adsl2LineAlarmConfProfileRowStatus OBJECT-TYPE adsl2LineAlarmConfProfileRowStatus OBJECT-TYPE
SYNTAX RowStatus SYNTAX RowStatus
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object is used to create a new row or to modify or "This object is used to create a new row or to modify or
delete an existing row in this table. delete an existing row in this table.
A profile is activated by setting this object to 'active'. A profile is activated by setting this object to 'active'.
When 'active' is set, the system will validate the profile. When 'active' is set, the system will validate the profile.
Profile modification is prohibited while this object is set
to 'active'.
Before a profile can be deleted or taken out of service Before a profile can be deleted or taken out of service
(by setting this object to 'destroy' or 'outOfService'), (by setting this object to 'destroy' or 'notInService'),
it must be first unreferenced from all associated it must be first unreferenced from all associated
templates." templates."
::= { adsl2LineAlarmConfProfileEntry 14 } ::= { adsl2LineAlarmConfProfileEntry 14 }
------------------------------------------------ ------------------------------------------------
-- adsl2ChAlarmConfProfileTable -- -- adsl2ChAlarmConfProfileTable --
------------------------------------------------ ------------------------------------------------
adsl2ChAlarmConfProfileTable OBJECT-TYPE adsl2ChAlarmConfProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF Adsl2ChAlarmConfProfileEntry SYNTAX SEQUENCE OF Adsl2ChAlarmConfProfileEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table adsl2ChAlarmConfProfileTable contains ADSL2 "The table adsl2ChAlarmConfProfileTable contains ADSL2
channel PM thresholds profiles." channel PM thresholds profiles.
Entries in this table MUST be maintained in a
persistent manner."
::= { adsl2ProfileAlarmConf 3 } ::= { adsl2ProfileAlarmConf 3 }
adsl2ChAlarmConfProfileEntry OBJECT-TYPE adsl2ChAlarmConfProfileEntry OBJECT-TYPE
SYNTAX Adsl2ChAlarmConfProfileEntry SYNTAX Adsl2ChAlarmConfProfileEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table adsl2ChAlarmConfProfileTable contains ADSL2 "The table adsl2ChAlarmConfProfileTable contains ADSL2
channel PM thresholds profiles. channel PM thresholds profiles.
A default profile with an index of 'DEFVAL' will A default profile with an index of 'DEFVAL' will
skipping to change at page 104, line 13 skipping to change at page 107, line 26
adsl2ChAlarmConfProfileRowStatus OBJECT-TYPE adsl2ChAlarmConfProfileRowStatus OBJECT-TYPE
SYNTAX RowStatus SYNTAX RowStatus
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object is used to create a new row or to modify or "This object is used to create a new row or to modify or
delete an existing row in this table. delete an existing row in this table.
A profile is activated by setting this object to 'active'. A profile is activated by setting this object to 'active'.
When 'active' is set, the system will validate the profile. When 'active' is set, the system will validate the profile.
Profile modification is prohibited while this object is set
to 'active'.
Before a profile can be deleted or taken out of service Before a profile can be deleted or taken out of service
(by setting this object to 'destroy' or 'outOfService'), (by setting this object to 'destroy' or 'notInService'),
it must be first unreferenced from all associated it must be first unreferenced from all associated
templates." templates."
::= { adsl2ChAlarmConfProfileEntry 6 } ::= { adsl2ChAlarmConfProfileEntry 6 }
------------------------------------------------ ------------------------------------------------
-- PM line current counters -- -- PM line current counters --
------------------------------------------------ ------------------------------------------------
adsl2PMLineCurrTable OBJECT-TYPE adsl2PMLineCurrTable OBJECT-TYPE
SYNTAX SEQUENCE OF Adsl2PMLineCurrEntry SYNTAX SEQUENCE OF Adsl2PMLineCurrEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table adsl2PMLineCurrTable contains current Performance "The table adsl2PMLineCurrTable contains current Performance
Monitoring results of ADSL2 line." Monitoring results of ADSL2 line. The objects in this table
are NOT persistent."
::= { adsl2PMLine 1 } ::= { adsl2PMLine 1 }
adsl2PMLineCurrEntry OBJECT-TYPE adsl2PMLineCurrEntry OBJECT-TYPE
SYNTAX Adsl2PMLineCurrEntry SYNTAX Adsl2PMLineCurrEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table adsl2PMLineCurrTable contains current Performance "The table adsl2PMLineCurrTable contains current Performance
Monitoring results of ADSL2 line. Monitoring results of ADSL2 line.
The index of this table is an interface index where the The index of this table is an interface index where the
skipping to change at page 109, line 27 skipping to change at page 112, line 43
------------------------------------------------ ------------------------------------------------
-- PM line init current counters -- -- PM line init current counters --
------------------------------------------------ ------------------------------------------------
adsl2PMLineCurrInitTable OBJECT-TYPE adsl2PMLineCurrInitTable OBJECT-TYPE
SYNTAX SEQUENCE OF Adsl2PMLineCurrInitEntry SYNTAX SEQUENCE OF Adsl2PMLineCurrInitEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table adsl2PMLineCurrInitTable contains current "The table adsl2PMLineCurrInitTable contains current
initialization counters of ADSL2 line." initialization counters of ADSL2 line. The objects in
this table are NOT persistent."
::= { adsl2PMLine 2 } ::= { adsl2PMLine 2 }
adsl2PMLineCurrInitEntry OBJECT-TYPE adsl2PMLineCurrInitEntry OBJECT-TYPE
SYNTAX Adsl2PMLineCurrInitEntry SYNTAX Adsl2PMLineCurrInitEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table adsl2PMLineCurrInitTable contains current "The table adsl2PMLineCurrInitTable contains current
initialization counters of ADSL2 line. initialization counters of ADSL2 line.
The index of this table is an interface index where the The index of this table is an interface index where the
skipping to change at page 112, line 21 skipping to change at page 115, line 38
------------------------------------------- -------------------------------------------
-- PM line history 15 Minutes -- -- PM line history 15 Minutes --
------------------------------------------- -------------------------------------------
adsl2PMLineHist15MinTable OBJECT-TYPE adsl2PMLineHist15MinTable OBJECT-TYPE
SYNTAX SEQUENCE OF Adsl2PMLineHist15MinEntry SYNTAX SEQUENCE OF Adsl2PMLineHist15MinEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table adsl2PMLineHist15MinTable contains PM line history "The table adsl2PMLineHist15MinTable contains PM line history
for 15min intervals of ADSL2 line." for 15min intervals of ADSL2 line. The objects in this table
are NOT persistent."
::= { adsl2PMLine 3 } ::= { adsl2PMLine 3 }
adsl2PMLineHist15MinEntry OBJECT-TYPE adsl2PMLineHist15MinEntry OBJECT-TYPE
SYNTAX Adsl2PMLineHist15MinEntry SYNTAX Adsl2PMLineHist15MinEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table adsl2PMLineHist15MinTable contains PM line history "The table adsl2PMLineHist15MinTable contains PM line history
for 15min intervals of ADSL2 line. for 15min intervals of ADSL2 line.
The index of this table is an interface index where the The index of this table is an interface index where the
skipping to change at page 113, line 15 skipping to change at page 116, line 33
adsl2PMLHist15MUnit OBJECT-TYPE adsl2PMLHist15MUnit OBJECT-TYPE
SYNTAX Adsl2Unit SYNTAX Adsl2Unit
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The termination unit ATUC{1} or ATUR{2}." "The termination unit ATUC{1} or ATUR{2}."
::= { adsl2PMLineHist15MinEntry 1 } ::= { adsl2PMLineHist15MinEntry 1 }
adsl2PMLHist15MInterval OBJECT-TYPE adsl2PMLHist15MInterval OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32 (1..96)
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The interval number." "The interval number."
::= { adsl2PMLineHist15MinEntry 2 } ::= { adsl2PMLineHist15MinEntry 2 }
adsl2PMLHist15MMonitoredTime OBJECT-TYPE adsl2PMLHist15MMonitoredTime OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
skipping to change at page 115, line 19 skipping to change at page 118, line 37
--------------------------------------- ---------------------------------------
-- PM line history 1 Day -- -- PM line history 1 Day --
--------------------------------------- ---------------------------------------
adsl2PMLineHist1DayTable OBJECT-TYPE adsl2PMLineHist1DayTable OBJECT-TYPE
SYNTAX SEQUENCE OF Adsl2PMLineHist1DayEntry SYNTAX SEQUENCE OF Adsl2PMLineHist1DayEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table adsl2PMLineHist1DayTable contains PM line history "The table adsl2PMLineHist1DayTable contains PM line history
for 24 hours intervals of ADSL2 line." for 24 hours intervals of ADSL2 line. The objects in this
table are NOT persistent."
::= { adsl2PMLine 4 } ::= { adsl2PMLine 4 }
adsl2PMLineHist1DayEntry OBJECT-TYPE adsl2PMLineHist1DayEntry OBJECT-TYPE
SYNTAX Adsl2PMLineHist1DayEntry SYNTAX Adsl2PMLineHist1DayEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table adsl2PMLineHist1DayTable contains PM line history "The table adsl2PMLineHist1DayTable contains PM line history
for 24 hours intervals of ADSL2 line. for 24 hours intervals of ADSL2 line.
The indexes of this table is an interface index where the The indexes of this table is an interface index where the
skipping to change at page 116, line 4 skipping to change at page 119, line 23
adsl2PMLHist1DUnit Adsl2Unit, adsl2PMLHist1DUnit Adsl2Unit,
adsl2PMLHist1DInterval Unsigned32, adsl2PMLHist1DInterval Unsigned32,
adsl2PMLHist1DMonitoredTime Unsigned32, adsl2PMLHist1DMonitoredTime Unsigned32,
adsl2PMLHist1DFecs Counter32, adsl2PMLHist1DFecs Counter32,
adsl2PMLHist1DEs Counter32, adsl2PMLHist1DEs Counter32,
adsl2PMLHist1DSes Counter32, adsl2PMLHist1DSes Counter32,
adsl2PMLHist1DLoss Counter32, adsl2PMLHist1DLoss Counter32,
adsl2PMLHist1DUas Counter32, adsl2PMLHist1DUas Counter32,
adsl2PMLHist1DValidInterval TruthValue adsl2PMLHist1DValidInterval TruthValue
} }
adsl2PMLHist1DUnit OBJECT-TYPE adsl2PMLHist1DUnit OBJECT-TYPE
SYNTAX Adsl2Unit SYNTAX Adsl2Unit
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The termination unit." "The termination unit."
::= { adsl2PMLineHist1DayEntry 1 } ::= { adsl2PMLineHist1DayEntry 1 }
adsl2PMLHist1DInterval OBJECT-TYPE adsl2PMLHist1DInterval OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32 (1..30)
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The interval number." "The interval number."
::= { adsl2PMLineHist1DayEntry 2 } ::= { adsl2PMLineHist1DayEntry 2 }
adsl2PMLHist1DMonitoredTime OBJECT-TYPE adsl2PMLHist1DMonitoredTime OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
skipping to change at page 118, line 19 skipping to change at page 121, line 39
-- PM line init history 15 Minutes -- -- PM line init history 15 Minutes --
------------------------------------------- -------------------------------------------
adsl2PMLineInitHist15MinTable OBJECT-TYPE adsl2PMLineInitHist15MinTable OBJECT-TYPE
SYNTAX SEQUENCE OF Adsl2PMLineInitHist15MinEntry SYNTAX SEQUENCE OF Adsl2PMLineInitHist15MinEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table adsl2PMLineInitHist15MinTable contains PM line "The table adsl2PMLineInitHist15MinTable contains PM line
initialization history for 15 minutes intervals of ADSL2 initialization history for 15 minutes intervals of ADSL2
line." line. The objects in this table are NOT persistent."
::= { adsl2PMLine 5 } ::= { adsl2PMLine 5 }
adsl2PMLineInitHist15MinEntry OBJECT-TYPE adsl2PMLineInitHist15MinEntry OBJECT-TYPE
SYNTAX Adsl2PMLineInitHist15MinEntry SYNTAX Adsl2PMLineInitHist15MinEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table adsl2PMLineInitHist15MinTable contains PM line "The table adsl2PMLineInitHist15MinTable contains PM line
initialization history for 15 minutes intervals of ADSL2 initialization history for 15 minutes intervals of ADSL2
line. line.
skipping to change at page 119, line 4 skipping to change at page 122, line 24
adsl2PMLHistInit15MInterval Unsigned32, adsl2PMLHistInit15MInterval Unsigned32,
adsl2PMLHistInit15MMonitoredTime Unsigned32, adsl2PMLHistInit15MMonitoredTime Unsigned32,
adsl2PMLHistInit15MFullInits Unsigned32, adsl2PMLHistInit15MFullInits Unsigned32,
adsl2PMLHistInit15MFailedFullInits Unsigned32, adsl2PMLHistInit15MFailedFullInits Unsigned32,
adsl2PMLHistInit15MShortInits Unsigned32, adsl2PMLHistInit15MShortInits Unsigned32,
adsl2PMLHistInit15MFailedShortInits Unsigned32, adsl2PMLHistInit15MFailedShortInits Unsigned32,
adsl2PMLHistInit15MValidInterval TruthValue adsl2PMLHistInit15MValidInterval TruthValue
} }
adsl2PMLHistInit15MInterval OBJECT-TYPE adsl2PMLHistInit15MInterval OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32 (1..96)
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The interval number." "The interval number."
::= { adsl2PMLineInitHist15MinEntry 1 } ::= { adsl2PMLineInitHist15MinEntry 1 }
adsl2PMLHistInit15MMonitoredTime OBJECT-TYPE adsl2PMLHistInit15MMonitoredTime OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
skipping to change at page 120, line 31 skipping to change at page 124, line 5
------------------------------------------- -------------------------------------------
-- PM line init history 1 Day -- -- PM line init history 1 Day --
------------------------------------------- -------------------------------------------
adsl2PMLineInitHist1DayTable OBJECT-TYPE adsl2PMLineInitHist1DayTable OBJECT-TYPE
SYNTAX SEQUENCE OF Adsl2PMLineInitHist1DayEntry SYNTAX SEQUENCE OF Adsl2PMLineInitHist1DayEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table adsl2PMLineInitHist1DayTable contains PM line "The table adsl2PMLineInitHist1DayTable contains PM line
initialization history for 24 hours intervals of ADSL2 initialization history for 24 hours intervals of ADSL2
line." line. The objects in this table are NOT persistent."
::= { adsl2PMLine 6 } ::= { adsl2PMLine 6 }
adsl2PMLineInitHist1DayEntry OBJECT-TYPE adsl2PMLineInitHist1DayEntry OBJECT-TYPE
SYNTAX Adsl2PMLineInitHist1DayEntry SYNTAX Adsl2PMLineInitHist1DayEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table adsl2PMLineInitHist1DayTable contains PM line "The table adsl2PMLineInitHist1DayTable contains PM line
initialization history for 24 hours intervals of ADSL2 initialization history for 24 hours intervals of ADSL2
line. line.
skipping to change at page 121, line 14 skipping to change at page 124, line 34
adsl2PMLHistinit1DInterval Unsigned32, adsl2PMLHistinit1DInterval Unsigned32,
adsl2PMLHistinit1DMonitoredTime Unsigned32, adsl2PMLHistinit1DMonitoredTime Unsigned32,
adsl2PMLHistinit1DFullInits Unsigned32, adsl2PMLHistinit1DFullInits Unsigned32,
adsl2PMLHistinit1DFailedFullInits Unsigned32, adsl2PMLHistinit1DFailedFullInits Unsigned32,
adsl2PMLHistinit1DShortInits Unsigned32, adsl2PMLHistinit1DShortInits Unsigned32,
adsl2PMLHistinit1DFailedShortInits Unsigned32, adsl2PMLHistinit1DFailedShortInits Unsigned32,
adsl2PMLHistinit1DValidInterval TruthValue adsl2PMLHistinit1DValidInterval TruthValue
} }
adsl2PMLHistinit1DInterval OBJECT-TYPE adsl2PMLHistinit1DInterval OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32 (1..30)
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The interval number." "The interval number."
::= { adsl2PMLineInitHist1DayEntry 1 } ::= { adsl2PMLineInitHist1DayEntry 1 }
adsl2PMLHistinit1DMonitoredTime OBJECT-TYPE adsl2PMLHistinit1DMonitoredTime OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
skipping to change at page 122, line 30 skipping to change at page 126, line 4
::= { adsl2PMLineInitHist1DayEntry 6 } ::= { adsl2PMLineInitHist1DayEntry 6 }
adsl2PMLHistinit1DValidInterval OBJECT-TYPE adsl2PMLHistinit1DValidInterval OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This variable indicates if the data for this interval is "This variable indicates if the data for this interval is
valid." valid."
::= { adsl2PMLineInitHist1DayEntry 7 } ::= { adsl2PMLineInitHist1DayEntry 7 }
--------------------------------------------------- ---------------------------------------------------
-- PM channel current counters -- -- PM channel current counters --
--------------------------------------------------- ---------------------------------------------------
adsl2PMChCurrTable OBJECT-TYPE adsl2PMChCurrTable OBJECT-TYPE
SYNTAX SEQUENCE OF Adsl2PMChCurrEntry SYNTAX SEQUENCE OF Adsl2PMChCurrEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table adsl2PMChCurrTable contains current Performance "The table adsl2PMChCurrTable contains current Performance
Monitoring results of ADSL2 channel." Monitoring results of ADSL2 channel. The objects in this
table are NOT persistent."
::= { adsl2PMChannel 1 } ::= { adsl2PMChannel 1 }
adsl2PMChCurrEntry OBJECT-TYPE adsl2PMChCurrEntry OBJECT-TYPE
SYNTAX Adsl2PMChCurrEntry SYNTAX Adsl2PMChCurrEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table adsl2PMChCurrTable contains current Performance "The table adsl2PMChCurrTable contains current Performance
Monitoring results of ADSL2 channel. Monitoring results of ADSL2 channel.
The indexes of this table is an interface index where The indexes of this table is an interface index where
the interface has an ifType value which is applicable the interface has an ifType value which is applicable
for a DSL channel and the termination unit." for a DSL channel and the termination unit."
INDEX { ifIndex, adsl2PMChCurrUnit } INDEX { ifIndex, adsl2PMChCurrUnit }
::= { adsl2PMChCurrTable 1 } ::= { adsl2PMChCurrTable 1 }
Adsl2PMChCurrEntry ::= Adsl2PMChCurrEntry ::=
SEQUENCE { SEQUENCE {
adsl2PMChCurrUnit Adsl2Unit, adsl2PMChCurrUnit Adsl2Unit,
adsl2PMChCurrValidIntervals Unsigned32, adsl2PMChCurrValidIntervals Unsigned32,
skipping to change at page 126, line 6 skipping to change at page 129, line 23
------------------------------------------- -------------------------------------------
-- PM channel history 15 Minutes -- -- PM channel history 15 Minutes --
------------------------------------------- -------------------------------------------
adsl2PMChHist15MinTable OBJECT-TYPE adsl2PMChHist15MinTable OBJECT-TYPE
SYNTAX SEQUENCE OF Adsl2PMChHist15MinEntry SYNTAX SEQUENCE OF Adsl2PMChHist15MinEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table adsl2PMChCurrTable contains current Performance "The table adsl2PMChCurrTable contains current Performance
Monitoring results of ADSL2 channel." Monitoring results of ADSL2 channel. The objects in this
table are NOT persistent."
::= { adsl2PMChannel 2 } ::= { adsl2PMChannel 2 }
adsl2PMChHist15MinEntry OBJECT-TYPE adsl2PMChHist15MinEntry OBJECT-TYPE
SYNTAX Adsl2PMChHist15MinEntry SYNTAX Adsl2PMChHist15MinEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table adsl2PMChCurrTable contains current Performance "The table adsl2PMChCurrTable contains current Performance
Monitoring results of ADSL2 channel. Monitoring results of ADSL2 channel.
The indexes of this table is an interface index where The indexes of this table is an interface index where
skipping to change at page 126, line 44 skipping to change at page 130, line 16
adsl2PMChHist15MUnit OBJECT-TYPE adsl2PMChHist15MUnit OBJECT-TYPE
SYNTAX Adsl2Unit SYNTAX Adsl2Unit
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The termination unit." "The termination unit."
::= { adsl2PMChHist15MinEntry 1 } ::= { adsl2PMChHist15MinEntry 1 }
adsl2PMChHist15MInterval OBJECT-TYPE adsl2PMChHist15MInterval OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32 (1..96)
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The interval number." "The interval number."
::= { adsl2PMChHist15MinEntry 2 } ::= { adsl2PMChHist15MinEntry 2 }
adsl2PMChHist15MMonitoredTime OBJECT-TYPE adsl2PMChHist15MMonitoredTime OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
skipping to change at page 128, line 12 skipping to change at page 131, line 30
------------------------------------------ ------------------------------------------
-- PM channel history 1 Day -- -- PM channel history 1 Day --
------------------------------------------ ------------------------------------------
adsl2PMChHist1DTable OBJECT-TYPE adsl2PMChHist1DTable OBJECT-TYPE
SYNTAX SEQUENCE OF Adsl2PMChHist1DEntry SYNTAX SEQUENCE OF Adsl2PMChHist1DEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table adsl2PMChHist1DayTable contains PM channel history "The table adsl2PMChHist1DayTable contains PM channel history
for 1 day intervals of ADSL2." for 1 day intervals of ADSL2. The objects in this table are
NOT persistent."
::= { adsl2PMChannel 3 } ::= { adsl2PMChannel 3 }
adsl2PMChHist1DEntry OBJECT-TYPE adsl2PMChHist1DEntry OBJECT-TYPE
SYNTAX Adsl2PMChHist1DEntry SYNTAX Adsl2PMChHist1DEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table adsl2PMChHist1DayTable contains PM channel history "The table adsl2PMChHist1DayTable contains PM channel history
for 1 day intervals of ADSL2. for 1 day intervals of ADSL2.
The indexes of this table is an interface index where The indexes of this table is an interface index where
skipping to change at page 128, line 51 skipping to change at page 132, line 23
adsl2PMChHist1DUnit OBJECT-TYPE adsl2PMChHist1DUnit OBJECT-TYPE
SYNTAX Adsl2Unit SYNTAX Adsl2Unit
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The termination unit." "The termination unit."
::= { adsl2PMChHist1DEntry 1 } ::= { adsl2PMChHist1DEntry 1 }
adsl2PMChHist1DInterval OBJECT-TYPE adsl2PMChHist1DInterval OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32 (1..30)
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The interval number." "The interval number."
::= { adsl2PMChHist1DEntry 2 } ::= { adsl2PMChHist1DEntry 2 }
adsl2PMChHist1DMonitoredTime OBJECT-TYPE adsl2PMChHist1DMonitoredTime OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
skipping to change at page 141, line 28 skipping to change at page 144, line 45
::= { adsl2Groups 11 } ::= { adsl2Groups 11 }
adsl2ChConfProfileGroup OBJECT-GROUP adsl2ChConfProfileGroup OBJECT-GROUP
OBJECTS OBJECTS
{ {
adsl2ChConfProfMinDataRateDs, adsl2ChConfProfMinDataRateDs,
adsl2ChConfProfMinDataRateUs, adsl2ChConfProfMinDataRateUs,
adsl2ChConfProfMaxDataRateDs, adsl2ChConfProfMaxDataRateDs,
adsl2ChConfProfMaxDataRateUs, adsl2ChConfProfMaxDataRateUs,
adsl2ChConfProfMinDataRateLowPwrDs, adsl2ChConfProfMinDataRateLowPwrDs,
adsl2ChConfProfMinDataRateLowPwrUs,
adsl2ChConfProfMaxDelayDs, adsl2ChConfProfMaxDelayDs,
adsl2ChConfProfMaxDelayUs, adsl2ChConfProfMaxDelayUs,
adsl2ChConfProfMinProtectionDs, adsl2ChConfProfMinProtectionDs,
adsl2ChConfProfMinProtectionUs, adsl2ChConfProfMinProtectionUs,
adsl2ChConfProfMaxBerDs, adsl2ChConfProfMaxBerDs,
adsl2ChConfProfMaxBerUs, adsl2ChConfProfMaxBerUs,
adsl2ChConfProfUsDataRateDs, adsl2ChConfProfUsDataRateDs,
adsl2ChConfProfDsDataRateDs, adsl2ChConfProfDsDataRateDs,
adsl2ChConfProfUsDataRateUs, adsl2ChConfProfUsDataRateUs,
adsl2ChConfProfDsDataRateUs, adsl2ChConfProfDsDataRateUs,
skipping to change at page 152, line 31 skipping to change at page 155, line 42
The table consists of the following objects that support SET The table consists of the following objects that support SET
operations: operations:
* adsl2ChConfProfMinDataRateDs * adsl2ChConfProfMinDataRateDs
* adsl2ChConfProfMinDataRateUs * adsl2ChConfProfMinDataRateUs
* adsl2ChConfProfMinResDataRateDs * adsl2ChConfProfMinResDataRateDs
* adsl2ChConfProfMinResDataRateUs * adsl2ChConfProfMinResDataRateUs
* adsl2ChConfProfMaxDataRateDs * adsl2ChConfProfMaxDataRateDs
* adsl2ChConfProfMaxDataRateUs * adsl2ChConfProfMaxDataRateUs
* adsl2ChConfProfMinDataRateLowPwrDs * adsl2ChConfProfMinDataRateLowPwrDs
* adsl2ChConfProfMinDataRateLowPwrUs
* adsl2ChConfProfMaxDelayDs * adsl2ChConfProfMaxDelayDs
* adsl2ChConfProfMaxDelayUs * adsl2ChConfProfMaxDelayUs
* adsl2ChConfProfMinProtectionDs * adsl2ChConfProfMinProtectionDs
* adsl2ChConfProfMinProtectionUs * adsl2ChConfProfMinProtectionUs
* adsl2ChConfProfMaxBerDs * adsl2ChConfProfMaxBerDs
* adsl2ChConfProfMaxBerUs * adsl2ChConfProfMaxBerUs
* adsl2ChConfProfUsDataRateDs * adsl2ChConfProfUsDataRateDs
* adsl2ChConfProfDsDataRateDs * adsl2ChConfProfDsDataRateDs
* adsl2ChConfProfUsDataRateUs * adsl2ChConfProfUsDataRateUs
* adsl2ChConfProfDsDataRateUs * adsl2ChConfProfDsDataRateUs
skipping to change at page 156, line 15 skipping to change at page 159, line 29
It is RECOMMENDED to deploy SNMPv3 and to enable cryptographic It is RECOMMENDED to deploy SNMPv3 and to enable cryptographic
security. It is then a customer/operator responsibility to ensure security. It is then a customer/operator responsibility to ensure
that the SNMP entity giving access to an instance of this MIB module that the SNMP entity giving access to an instance of this MIB module
is properly configured to give access only to those objects whose is properly configured to give access only to those objects whose
principals (users) have legitimate rights to indeed GET or SET principals (users) have legitimate rights to indeed GET or SET
(change/create/delete) them. (change/create/delete) them.
6. Acknowledgments 6. Acknowledgments
The authors are deeply grateful to the authors of the HDSL2 LINE MIB The authors are deeply grateful to the authors of the HDSL2 LINE MIB
(RFC xxxx), Clay Sikes and Bob Ray, for contributing to accelerating (RFC 4319), Clay Sikes and Bob Ray, for contributing to accelerating
the work on this document. The structure of this document as well as the work on this document. The structure of this document as well as
several paragraphs originate in their document. several paragraphs originate in their document.
Other contributions and advice were received from the following: Other contributions and advice were received from the following:
Randy Presuhn (Mindspring) Randy Presuhn (Mindspring)
Chen Jian (Huawei) Chen Jian (Huawei)
Bert Wijnen (Lucent) Bert Wijnen (Lucent)
Clay Sikes (Zhone) Clay Sikes (Zhone)
skipping to change at page 160, line 41 skipping to change at page 163, line 41
This document and the information contained herein are provided on an This document and the information contained herein are provided on an
"AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED, ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Copyright Statement Copyright Statement
Copyright (C) The Internet Society (2005). This document is subject Copyright (C) The Internet Society (2006). This document is subject
to the rights, licenses and restrictions contained in BCP 78, and to the rights, licenses and restrictions contained in BCP 78, and
except as set forth therein, the authors retain all their rights. except as set forth therein, the authors retain all their rights.
Acknowledgment Acknowledgment
Funding for the RFC Editor function is currently provided by the Funding for the RFC Editor function is currently provided by the
Internet Society. Internet Society.
 End of changes. 110 change blocks. 
137 lines changed or deleted 308 lines changed or added

This html diff was produced by rfcdiff 1.28, available from http://www.levkowetz.com/ietf/tools/rfcdiff/