draft-ietf-adslmib-adsl2-05.txt   draft-ietf-adslmib-adsl2-06.txt 
Network Working Group M. Morgenstern Network Working Group M. Morgenstern
Internet-Draft M. Dodge Internet-Draft M. Dodge
Expires: July 19, 2006 ECI Telecom Ltd. Expires: August 27, 2006 ECI Telecom Ltd.
S. Baillie S. Baillie
U. Bonollo U. Bonollo
NEC Australia NEC Australia
January 15, 2006 February 23, 2006
Definitions of Managed Objects for Asymmetric Digital Subscriber Line 2 Definitions of Managed Objects for Asymmetric Digital Subscriber Line 2
(ADSL2) (ADSL2)
draft-ietf-adslmib-adsl2-05.txt draft-ietf-adslmib-adsl2-06.txt
Status of this Memo Status of this Memo
By submitting this Internet-Draft, each author represents that any By submitting this Internet-Draft, each author represents that any
applicable patent or other IPR claims of which he or she is aware applicable patent or other IPR claims of which he or she is aware
have been or will be disclosed, and any of which he or she becomes have been or will be disclosed, and any of which he or she becomes
aware will be disclosed, in accordance with Section 6 of BCP 79. aware will be disclosed, in accordance with Section 6 of BCP 79.
Internet-Drafts are working documents of the Internet Engineering Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF), its areas, and its working groups. Note that Task Force (IETF), its areas, and its working groups. Note that
skipping to change at page 1, line 38 skipping to change at page 1, line 38
and may be updated, replaced, or obsoleted by other documents at any and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress." material or to cite them other than as "work in progress."
The list of current Internet-Drafts can be accessed at The list of current Internet-Drafts can be accessed at
http://www.ietf.org/ietf/1id-abstracts.txt. http://www.ietf.org/ietf/1id-abstracts.txt.
The list of Internet-Draft Shadow Directories can be accessed at The list of Internet-Draft Shadow Directories can be accessed at
http://www.ietf.org/shadow.html. http://www.ietf.org/shadow.html.
This Internet-Draft will expire on July 19, 2006. This Internet-Draft will expire on August 27, 2006.
Copyright Notice Copyright Notice
Copyright (C) The Internet Society (2006). Copyright (C) The Internet Society (2006).
Abstract Abstract
This document defines a Management Information Base (MIB) module for This document defines a Management Information Base (MIB) module for
use with network management protocols in the Internet community. In use with network management protocols in the Internet community. In
particular, it describes objects used for managing parameters of the particular, it describes objects used for managing parameters of the
skipping to change at page 2, line 20 skipping to change at page 2, line 20
2.1. Relationship to other MIBs . . . . . . . . . . . . . . . 4 2.1. Relationship to other MIBs . . . . . . . . . . . . . . . 4
2.2. IANA Considerations . . . . . . . . . . . . . . . . . . . 6 2.2. IANA Considerations . . . . . . . . . . . . . . . . . . . 6
2.3. Conventions Used in the MIB Module . . . . . . . . . . . 6 2.3. Conventions Used in the MIB Module . . . . . . . . . . . 6
2.4. Structure . . . . . . . . . . . . . . . . . . . . . . . . 13 2.4. Structure . . . . . . . . . . . . . . . . . . . . . . . . 13
2.5. Persistence . . . . . . . . . . . . . . . . . . . . . . . 15 2.5. Persistence . . . . . . . . . . . . . . . . . . . . . . . 15
2.6. Line Topology . . . . . . . . . . . . . . . . . . . . . . 18 2.6. Line Topology . . . . . . . . . . . . . . . . . . . . . . 18
2.7. Counters, Interval Buckets, and Thresholds . . . . . . . 18 2.7. Counters, Interval Buckets, and Thresholds . . . . . . . 18
2.8. Profiles . . . . . . . . . . . . . . . . . . . . . . . . 20 2.8. Profiles . . . . . . . . . . . . . . . . . . . . . . . . 20
2.9. Notifications . . . . . . . . . . . . . . . . . . . . . . 24 2.9. Notifications . . . . . . . . . . . . . . . . . . . . . . 24
3. Definitions . . . . . . . . . . . . . . . . . . . . . . . . . 25 3. Definitions . . . . . . . . . . . . . . . . . . . . . . . . . 25
4. Implementation Analysis . . . . . . . . . . . . . . . . . . . 151 4. Implementation Analysis . . . . . . . . . . . . . . . . . . . 153
5. Security Considerations . . . . . . . . . . . . . . . . . . . 152 5. Security Considerations . . . . . . . . . . . . . . . . . . . 153
6. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . 159 6. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . 160
7. References . . . . . . . . . . . . . . . . . . . . . . . . . 159 7. References . . . . . . . . . . . . . . . . . . . . . . . . . 161
7.1. Normative References . . . . . . . . . . . . . . . . . . 159 7.1. Normative References . . . . . . . . . . . . . . . . . . 161
7.2. Informative References . . . . . . . . . . . . . . . . . 161 7.2. Informative References . . . . . . . . . . . . . . . . . 162
Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 162 Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 164
Intellectual Property and Copyright Statements . . . . . . . . . 163 Intellectual Property and Copyright Statements . . . . . . . . . 165
1. The Internet-Standard Management Framework 1. The Internet-Standard Management Framework
For a detailed overview of the documents that describe the current For a detailed overview of the documents that describe the current
Internet-Standard Management Framework, please refer to Section 7 of Internet-Standard Management Framework, please refer to Section 7 of
RFC 3410 [RFC3410]. RFC 3410 [RFC3410].
Managed objects are accessed via a virtual information store, termed Managed objects are accessed via a virtual information store, termed
the Management Information Base or MIB. MIB objects are generally the Management Information Base or MIB. MIB objects are generally
accessed through the Simple Network Management Protocol (SNMP). accessed through the Simple Network Management Protocol (SNMP).
skipping to change at page 7, line 41 skipping to change at page 7, line 41
transmission modes in the list. transmission modes in the list.
o Adsl2RaMode: o Adsl2RaMode:
Attributes with this syntax reference if and how Rate-Adaptive Attributes with this syntax reference if and how Rate-Adaptive
synchronization is being used on the respective ADSL/ADSL2 or synchronization is being used on the respective ADSL/ADSL2 or
ADSL2+ link: ADSL2+ link:
manual (1) - No Rate-Adaptation. The initialization process manual (1) - No Rate-Adaptation. The initialization process
attempts to synchronize to a specified rate. attempts to synchronize to a specified rate.
rainit (2) - Rate-Adaptation during initialization process raInit (2) - Rate-Adaptation during initialization process
only, which attempts to synchronize to a rate only, which attempts to synchronize to a rate
between minimum and maximum specified values. between minimum and maximum specified values.
dynamicRa (3) - Dynamic Rate-Adaptation during initialization dynamicRa (3) - Dynamic Rate-Adaptation during initialization
process as well as during SHOWTIME. process as well as during SHOWTIME.
o Adsl2InitResult: o Adsl2InitResult:
Attributes with this syntax reference the recent result of a full Attributes with this syntax reference the recent result of a full
initialization attempt: initialization attempt:
skipping to change at page 8, line 35 skipping to change at page 8, line 35
adsl2Isdn (4), - ADSL2 (ISDN) adsl2Isdn (4), - ADSL2 (ISDN)
adsl2PlusPots (5), - ADSL2+ (POTS) adsl2PlusPots (5), - ADSL2+ (POTS)
adsl2PlusIsdn (6), - ADSL2+ (ISDN) adsl2PlusIsdn (6), - ADSL2+ (ISDN)
adsl2ReachExtended (7)- Reach Extended ADSL2 adsl2ReachExtended (7)- Reach Extended ADSL2
o Adsl2PowerMngState: o Adsl2PowerMngState:
Attributes with this syntax uniquely identify each power Attributes with this syntax uniquely identify each power
management state defined for the ADSL/ADSL2 or ADSL2+ link: management state defined for the ADSL/ADSL2 or ADSL2+ link:
l0(0) - L0 - Full power management state l0(1) - L0 - Full power management state
l1(1) - L1 - Low power management state (for G.992.2) l1(2) - L1 - Low power management state (for G.992.2)
l2(2) - L2 - Low power management state (for G.992.3, l2(3) - L2 - Low power management state (for G.992.3,
G.992.4, and G.992.5) G.992.4, and G.992.5)
l3(3) - L3 - Idle power management state l3(4) - L3 - Idle power management state
o Adsl2ConfPmsForce: o Adsl2ConfPmsForce:
Attributes with this syntax are configuration parameters that Attributes with this syntax are configuration parameters that
reference the desired power management state for the ADSL/ADSL2 or reference the desired power management state for the ADSL/ADSL2 or
ADSL2+ link: ADSL2+ link:
l3toL0 (1) - Perform a transition from L3 to L0 (Full l3toL0 (0) - Perform a transition from L3 to L0 (Full
power management state) power management state)
l0toL2 (2) - Perform a transition from L0 to L2 (Low l0toL2 (2) - Perform a transition from L0 to L2 (Low
power management state) power management state)
l0orL2toL3 (3) - Perform a transition into L3 (Idle power l0orL2toL3 (3) - Perform a transition into L3 (Idle power
management state) management state)
o Adsl2LConfProfPmMode: o Adsl2LConfProfPmMode:
Attributes with this syntax are configuration parameters that Attributes with this syntax are configuration parameters that
reference the power modes/states into which the ATU-C or ATU-R may reference the power modes/states into which the ATU-C or ATU-R may
autonomously transit. autonomously transit.
skipping to change at page 12, line 29 skipping to change at page 12, line 29
This is a BITS structure that can report the following failures: This is a BITS structure that can report the following failures:
noDefect (0) - This bit position positively reports that noDefect (0) - This bit position positively reports that
no defect or failure exist. no defect or failure exist.
lossOfFraming (1) - Loss of frame synchronization lossOfFraming (1) - Loss of frame synchronization
lossOfSignal (2) - Loss of signal lossOfSignal (2) - Loss of signal
lossOfPower (3) - Loss of power. Usually this failure may lossOfPower (3) - Loss of power. Usually this failure may
be reported for CPE units only be reported for CPE units only
initFailure (4) - Recent initialization process failed. initFailure (4) - Recent initialization process failed.
Never active on ATU-R.
o Adsl2ChAtmStatus: o Adsl2ChAtmStatus:
Attributes with this syntax are status parameters that reflect the Attributes with this syntax are status parameters that reflect the
failure status for Transmission Convergence (TC) layer of a given failure status for Transmission Convergence (TC) layer of a given
ATM interface (data path over an ADSL/ADSL2 or ADSL2+ link). ATM interface (data path over an ADSL/ADSL2 or ADSL2+ link).
This is a BITS structure that can report the following failures: This is a BITS structure that can report the following failures:
noDefect (0) - This bit position positively reports noDefect (0) - This bit position positively reports
skipping to change at page 25, line 36 skipping to change at page 25, line 36
IMPORTS IMPORTS
MODULE-IDENTITY, MODULE-IDENTITY,
transmission transmission
FROM SNMPv2-SMI FROM SNMPv2-SMI
TEXTUAL-CONVENTION TEXTUAL-CONVENTION
FROM SNMPv2-TC; FROM SNMPv2-TC;
adsl2TCMIB MODULE-IDENTITY adsl2TCMIB MODULE-IDENTITY
LAST-UPDATED "200601150000Z" -- January 15, 2006 LAST-UPDATED "200602230000Z" -- February 23, 2006
ORGANIZATION "ADSLMIB Working Group" ORGANIZATION "ADSLMIB Working Group"
CONTACT-INFO "WG-email: adslmib@ietf.org CONTACT-INFO "WG-email: adslmib@ietf.org
Info: https://www1.ietf.org/mailman/listinfo/adslmib Info: https://www1.ietf.org/mailman/listinfo/adslmib
Chair: Mike Sneed Chair: Mike Sneed
Sand Channel Systems Sand Channel Systems
Postal: P.O. Box 37324 Postal: P.O. Box 37324
Raleigh NC 27627-732 Raleigh NC 27627-732
Email: sneedmike@hotmail.com Email: sneedmike@hotmail.com
Phone: +1 206 600 7022 Phone: +1 206 600 7022
Co-Chair: Bob Ray Co-Chair & Co-editor:
PESA Switching Systems, Inc. Menachem Dodge
Postal: 330-A Wynn Drive
Huntsville, AL 35805
USA
Email: rray@pesa.com
Phone: +1 256 726 9200 ext. 142
Co-editor: Moti Morgenstern
ECI Telecom Ltd. ECI Telecom Ltd.
Postal: 30 Hasivim St. Postal: 30 Hasivim St.
Petach Tikva 49517, Petach Tikva 49517,
Israel. Israel.
Email: moti.morgenstern@ecitele.com Email: mbdodge@ieee.org
Phone: +972 3 926 6258 Phone: +972 3 926 8421
Co-editor: Menachem Dodge Co-editor: Moti Morgenstern
ECI Telecom Ltd. ECI Telecom Ltd.
Postal: 30 Hasivim St. Postal: 30 Hasivim St.
Petach Tikva 49517, Petach Tikva 49517,
Israel. Israel.
Email: mbdodge@ieee.org Email: moti.morgenstern@ecitele.com
Phone: +972 3 926 8421 Phone: +972 3 926 6258
Co-editor: Scott Baillie Co-editor: Scott Baillie
NEC Australia NEC Australia
Postal: 649-655 Springvale Road, Postal: 649-655 Springvale Road,
Mulgrave, Victoria 3170, Mulgrave, Victoria 3170,
Australia. Australia.
Email: scott.baillie@nec.com.au Email: scott.baillie@nec.com.au
Phone: +61 3 9264 3986 Phone: +61 3 9264 3986
Co-editor: Umberto Bonollo Co-editor: Umberto Bonollo
skipping to change at page 27, line 4 skipping to change at page 26, line 45
Phone: +61 3 9264 3385 Phone: +61 3 9264 3385
" "
DESCRIPTION DESCRIPTION
"This MIB Module provides Textual Conventions to be "This MIB Module provides Textual Conventions to be
used by the ADSL2-LINE-MIB module for the purpose of used by the ADSL2-LINE-MIB module for the purpose of
managing ADSL, ADSL2 and ADSL2+ lines. managing ADSL, ADSL2 and ADSL2+ lines.
Copyright (C) The Internet Society (2006). This version of Copyright (C) The Internet Society (2006). This version of
this MIB module is part of RFC XXXX: see the RFC itself for this MIB module is part of RFC XXXX: see the RFC itself for
full legal notices." full legal notices."
-- RFC Ed.: replace XXXX with assigned number & remove this note -- RFC Ed.: replace XXXX with assigned number & remove this note
REVISION "200601150000Z" -- January 15, 2006 REVISION "200602230000Z" -- February 23, 2006
DESCRIPTION "Initial version, published as RFC XXXX." DESCRIPTION "Initial version, published as RFC XXXX."
-- RFC Ed.: replace XX with assigned number & remove this note -- RFC Ed.: replace XX with assigned number & remove this note
::= { transmission xxx 2} -- adsl2MIB 2 ::= { transmission xxx 2} -- adsl2MIB 2
-- RFC Ed.: we suggest to put it under { transmission 230 } because -- IANA, the xxx here must be the same as the one assigned
-- this is the first available number. -- to the adsl2MIB below.
-- RFC Ed.: Please fill in xxx once assigned by IANA.
------------------------------------------------ ------------------------------------------------
-- Textual Conventions -- -- Textual Conventions --
------------------------------------------------ ------------------------------------------------
Adsl2Unit ::= TEXTUAL-CONVENTION Adsl2Unit ::= TEXTUAL-CONVENTION
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Identifies a transceiver as being either atuc or "Identifies a transceiver as being either atuc or
atur. An ADSL line consists of two transceivers, an atuc atur. An ADSL line consists of two transceivers, an atuc
skipping to change at page 30, line 25 skipping to change at page 30, line 20
} }
Adsl2RaMode ::= TEXTUAL-CONVENTION Adsl2RaMode ::= TEXTUAL-CONVENTION
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Specifies the rate adaptation behavior for the line. "Specifies the rate adaptation behavior for the line.
The three possible behaviors are: The three possible behaviors are:
manual (1) - No Rate-Adaptation. The initialization manual (1) - No Rate-Adaptation. The initialization
process attempts to synchronize to a process attempts to synchronize to a
specified rate. specified rate.
rainit (2) - Rate-Adaptation during initialization process raInit (2) - Rate-Adaptation during initialization process
only, which attempts to synchronize to a rate only, which attempts to synchronize to a rate
between minimum and maximum specified values. between minimum and maximum specified values.
dynamicRa (3)- Dynamic Rate-Adaptation during initialization dynamicRa (3)- Dynamic Rate-Adaptation during initialization
process as well as during SHOWTIME" process as well as during SHOWTIME"
SYNTAX INTEGER { SYNTAX INTEGER {
manual(1), manual(1),
raInit(2), raInit(2),
dynamicRa(3) dynamicRa(3)
} }
skipping to change at page 31, line 31 skipping to change at page 31, line 26
adsl2PlusIsdn (6), adsl2PlusIsdn (6),
adsl2ReachExtended (7) adsl2ReachExtended (7)
} }
Adsl2PowerMngState ::= TEXTUAL-CONVENTION Adsl2PowerMngState ::= TEXTUAL-CONVENTION
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Attributes with this syntax uniquely identify each power "Attributes with this syntax uniquely identify each power
management state defined for the ADSL/ADSL2 or ADSL2+ link. management state defined for the ADSL/ADSL2 or ADSL2+ link.
The possible values are: The possible values are:
l0(0) - L0 - Full power management state l0(1) - L0 - Full power management state
l1(1) - L1 - Low power management state (for G.992.2) l1(2) - L1 - Low power management state (for G.992.2)
l2(2) - L2 - Low power management state (for G.992.3, l2(3) - L2 - Low power management state (for G.992.3,
G.992.4, and G.992.5) G.992.4, and G.992.5)
l3(3) - L3 - Idle power management state" l3(4) - L3 - Idle power management state"
SYNTAX INTEGER { SYNTAX INTEGER {
l0(0), l0(1),
l1(1), l1(2),
l2(2), l2(3),
l3(3) l3(4)
} }
Adsl2ConfPmsForce ::= TEXTUAL-CONVENTION Adsl2ConfPmsForce ::= TEXTUAL-CONVENTION
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Attributes with this syntax are configuration parameters "Attributes with this syntax are configuration parameters
that reference the desired power management state for the that reference the desired power management state for the
ADSL/ADSL2 or ADSL2+ link: ADSL/ADSL2 or ADSL2+ link:
l3toL0 (1) - Perform a transition from L3 to L0 l3toL0 (0) - Perform a transition from L3 to L0
(Full power management state) (Full power management state)
l0toL2 (2) - Perform a transition from L0 to L2 l0toL2 (2) - Perform a transition from L0 to L2
(Low power management state) (Low power management state)
l0orL2toL3 (3) - Perform a transition into L3 (Idle l0orL2toL3 (3) - Perform a transition into L3 (Idle
power management state)" power management state)"
SYNTAX INTEGER { SYNTAX INTEGER {
l3toL0 (0), l3toL0 (0),
l0toL2 (2), l0toL2 (2),
l0orL2toL3 (3) l0orL2toL3 (3)
} }
Adsl2LConfProfPmMode ::= TEXTUAL-CONVENTION Adsl2LConfProfPmMode ::= TEXTUAL-CONVENTION
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Attributes with this syntax are configuration parameters "Attributes with this syntax are configuration parameters
skipping to change at page 35, line 6 skipping to change at page 34, line 49
STRING array represents the corresponding bin STRING array represents the corresponding bin
in the downstream direction. A value of one in the downstream direction. A value of one
indicates that the bin is not in use." indicates that the bin is not in use."
SYNTAX OCTET STRING (SIZE(0..64)) SYNTAX OCTET STRING (SIZE(0..64))
Adsl2ScMaskUs ::= TEXTUAL-CONVENTION Adsl2ScMaskUs ::= TEXTUAL-CONVENTION
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Each one of the 64 bits in this OCTET "Each one of the 64 bits in this OCTET
STRING array represents the corresponding bin STRING array represents the corresponding bin
in the downstream direction. A value of one in the upstream direction. A value of one
indicates that the bin is not in use." indicates that the bin is not in use."
SYNTAX OCTET STRING (SIZE(0..8)) SYNTAX OCTET STRING (SIZE(0..8))
Adsl2RfiDs ::= TEXTUAL-CONVENTION Adsl2RfiDs ::= TEXTUAL-CONVENTION
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Each one of the 512 bits in this OCTET "Each one of the 512 bits in this OCTET
STRING array represents the corresponding bin STRING array represents the corresponding bin
in the downstream direction. A value of one in the downstream direction. A value of one
indicates that the bin is part of a notch indicates that the bin is part of a notch
filter." filter."
SYNTAX OCTET STRING (SIZE(0..64)) SYNTAX OCTET STRING (SIZE(0..64))
skipping to change at page 36, line 17 skipping to change at page 36, line 11
is a value from 0 to 127 (units of -0.5dB). The is a value from 0 to 127 (units of -0.5dB). The
special value 127 indicates that the sub-carrier special value 127 indicates that the sub-carrier
is not transmitted." is not transmitted."
SYNTAX OCTET STRING (SIZE(0..96)) SYNTAX OCTET STRING (SIZE(0..96))
Adsl2LastTransmittedState ::= TEXTUAL-CONVENTION Adsl2LastTransmittedState ::= TEXTUAL-CONVENTION
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This parameter represents the last successful "This parameter represents the last successful
transmitted initialization state in the last full transmitted initialization state in the last full
initialization performed on the line." initialization performed on the line. States are
per the specific xDSL technology and are numbered
from 0 (if G.994.1 is used) or 1 (if G.994.1 is
not used) up to Showtime."
SYNTAX INTEGER { SYNTAX INTEGER {
atucG9941(0), atucG9941(0),
atucQuiet1(1), atucQuiet1(1),
atucComb1(2), atucComb1(2),
atucQuiet2(3), atucQuiet2(3),
atucComb2(4), atucComb2(4),
atucIcomb1(5), atucIcomb1(5),
atucLineprob(6), atucLineprob(6),
atucQuiet3(7), atucQuiet3(7),
atucComb3(8), atucComb3(8),
skipping to change at page 38, line 6 skipping to change at page 37, line 51
ADSL/ADSL2 or ADSL2+ link. ADSL/ADSL2 or ADSL2+ link.
This BITS structure can report the following failures: This BITS structure can report the following failures:
noDefect (0) - This bit position positively reports noDefect (0) - This bit position positively reports
that no defect or failure exist. that no defect or failure exist.
lossOfFraming (1) - Loss of frame synchronization lossOfFraming (1) - Loss of frame synchronization
lossOfSignal (2) - Loss of signal lossOfSignal (2) - Loss of signal
lossOfPower (3) - Loss of power. Usually this failure may lossOfPower (3) - Loss of power. Usually this failure may
be reported for CPE units only be reported for CPE units only
initFailure (4) - Recent initialization process failed." initFailure (4) - Recent initialization process failed.
Never active on ATU-R."
SYNTAX BITS { SYNTAX BITS {
noDefect(0), noDefect(0),
lossOfFraming(1), lossOfFraming(1),
lossOfSignal(2), lossOfSignal(2),
lossOfPower(3), lossOfPower(3),
initFailure(4) initFailure(4)
} }
Adsl2ChAtmStatus ::= TEXTUAL-CONVENTION Adsl2ChAtmStatus ::= TEXTUAL-CONVENTION
skipping to change at page 40, line 27 skipping to change at page 40, line 25
Adsl2ChAtmStatus, Adsl2ChAtmStatus,
Adsl2ChPtmStatus Adsl2ChPtmStatus
FROM ADSL2-LINE-TC-MIB -- [This document] FROM ADSL2-LINE-TC-MIB -- [This document]
MODULE-COMPLIANCE, MODULE-COMPLIANCE,
OBJECT-GROUP, OBJECT-GROUP,
NOTIFICATION-GROUP NOTIFICATION-GROUP
FROM SNMPv2-CONF; FROM SNMPv2-CONF;
adsl2MIB MODULE-IDENTITY adsl2MIB MODULE-IDENTITY
LAST-UPDATED "200601150000Z" -- January 15, 2006 LAST-UPDATED "200602230000Z" -- February 23, 2006
ORGANIZATION "ADSLMIB Working Group" ORGANIZATION "ADSLMIB Working Group"
CONTACT-INFO "WG-email: adslmib@ietf.org CONTACT-INFO "WG-email: adslmib@ietf.org
Info: https://www1.ietf.org/mailman/listinfo/adslmib Info: https://www1.ietf.org/mailman/listinfo/adslmib
Chair: Mike Sneed Chair: Mike Sneed
Sand Channel Systems Sand Channel Systems
Postal: P.O. Box 37324 Postal: P.O. Box 37324
Raleigh NC 27627-732 Raleigh NC 27627-732
Email: sneedmike@hotmail.com Email: sneedmike@hotmail.com
Phone: +1 206 600 7022 Phone: +1 206 600 7022
Co-Chair: Bob Ray Co-Chair & Co-editor:
PESA Switching Systems, Inc. Menachem Dodge
Postal: 330-A Wynn Drive
Huntsville, AL 35805
USA
Email: rray@pesa.com
Phone: +1 256 726 9200 ext. 142
Co-editor: Moti Morgenstern
ECI Telecom Ltd. ECI Telecom Ltd.
Postal: 30 Hasivim St. Postal: 30 Hasivim St.
Petach Tikva 49517, Petach Tikva 49517,
Israel. Israel.
Email: moti.morgenstern@ecitele.com Email: mbdodge@ieee.org
Phone: +972 3 926 6258 Phone: +972 3 926 8421
Co-editor: Menachem Dodge Co-editor: Moti Morgenstern
ECI Telecom Ltd. ECI Telecom Ltd.
Postal: 30 Hasivim St. Postal: 30 Hasivim St.
Petach Tikva 49517, Petach Tikva 49517,
Israel. Israel.
Email: mbdodge@ieee.org
Phone: +972 3 926 8421 Email: moti.morgenstern@ecitele.com
Phone: +972 3 926 6258
Co-editor: Scott Baillie Co-editor: Scott Baillie
NEC Australia NEC Australia
Postal: 649-655 Springvale Road, Postal: 649-655 Springvale Road,
Mulgrave, Victoria 3170, Mulgrave, Victoria 3170,
Australia. Australia.
Email: scott.baillie@nec.com.au Email: scott.baillie@nec.com.au
Phone: +61 3 9264 3986 Phone: +61 3 9264 3986
Co-editor: Umberto Bonollo Co-editor: Umberto Bonollo
skipping to change at page 42, line 26 skipping to change at page 42, line 17
The MIB module is located in the MIB tree under MIB 2 The MIB module is located in the MIB tree under MIB 2
transmission, as discussed in the MIB-2 Integration (RFC 2863 transmission, as discussed in the MIB-2 Integration (RFC 2863
[RFC2863]) section of this document. [RFC2863]) section of this document.
Copyright (C) The Internet Society (2006). This version of Copyright (C) The Internet Society (2006). This version of
this MIB module is part of RFC XXXX: see the RFC itself for this MIB module is part of RFC XXXX: see the RFC itself for
full legal notices." full legal notices."
-- RFC Ed.: replace XXXX with assigned number & remove this note -- RFC Ed.: replace XXXX with assigned number & remove this note
REVISION "200601150000Z" -- January 15, 2006 REVISION "200602230000Z" -- February 23, 2006
DESCRIPTION "Initial version, published as RFC XXXX." DESCRIPTION "Initial version, published as RFC XXXX."
-- RFC Ed.: replace XX with assigned number & remove this note -- RFC Ed.: replace XXXX with assigned number & remove this note
::= { transmission xxx } ::= { transmission xxx }
-- RFC Ed.: we suggest to put it under { transmission 230 } because -- IANA, we suggest to put it under { transmission 230 } because
-- this is the first available number. -- this is the first available number.
-- RFC Ed.: Please fill in xxx once assigned by IANA.
adsl2 OBJECT IDENTIFIER ::= { adsl2MIB 1 } adsl2 OBJECT IDENTIFIER ::= { adsl2MIB 1 }
------------------------------------------------ ------------------------------------------------
adsl2Line OBJECT IDENTIFIER ::= { adsl2 1 } adsl2Line OBJECT IDENTIFIER ::= { adsl2 1 }
adsl2Status OBJECT IDENTIFIER ::= { adsl2 2 } adsl2Status OBJECT IDENTIFIER ::= { adsl2 2 }
adsl2Inventory OBJECT IDENTIFIER ::= { adsl2 3 } adsl2Inventory OBJECT IDENTIFIER ::= { adsl2 3 }
adsl2PM OBJECT IDENTIFIER ::= { adsl2 4 } adsl2PM OBJECT IDENTIFIER ::= { adsl2 4 }
adsl2Profile OBJECT IDENTIFIER ::= { adsl2 5 } adsl2Profile OBJECT IDENTIFIER ::= { adsl2 5 }
adsl2Scalar OBJECT IDENTIFIER ::= { adsl2 6 } adsl2Scalar OBJECT IDENTIFIER ::= { adsl2 6 }
adsl2Notifications OBJECT IDENTIFIER ::= { adsl2 0 } adsl2Notifications OBJECT IDENTIFIER ::= { adsl2 0 }
skipping to change at page 44, line 22 skipping to change at page 44, line 14
adsl2LineStatusActAtpDs Integer32, adsl2LineStatusActAtpDs Integer32,
adsl2LineStatusActAtpUs Integer32 adsl2LineStatusActAtpUs Integer32
} }
adsl2LineCnfgTemplate OBJECT-TYPE adsl2LineCnfgTemplate OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32)) SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The value of this object identifies the row in the ADSL2 Line "The value of this object identifies the row in the ADSL2 Line
Configuration Templates Table, (Adsl2ConfTemplatesTable), Configuration Templates Table, (adsl2LineConfTemplateTable),
which applies for this ADSL2 line. which applies for this ADSL2 line.
This object MUST be maintained in a persistent manner." This object MUST be maintained in a persistent manner."
REFERENCE "DSL Forum TR-90, paragraph 5.1.1" REFERENCE "DSL Forum TR-90, paragraph 5.1.1"
DEFVAL { "DEFVAL" } DEFVAL { "DEFVAL" }
::= { adsl2LineEntry 1 } ::= { adsl2LineEntry 1 }
adsl2LineAlarmCnfgTemplate OBJECT-TYPE adsl2LineAlarmCnfgTemplate OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32)) SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS read-write MAX-ACCESS read-write
skipping to change at page 47, line 26 skipping to change at page 47, line 18
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The current power management state. One of four possible "The current power management state. One of four possible
power management states: power management states:
L0 - Synchronized and full transmission (i.e., Showtime), L0 - Synchronized and full transmission (i.e., Showtime),
L1 - Low Power with reduced net data rate (G.992.2 only), L1 - Low Power with reduced net data rate (G.992.2 only),
L2 - Low Power with reduced net data rate (G.992.3 and L2 - Low Power with reduced net data rate (G.992.3 and
G.992.4 only), G.992.4 only),
L3 - No power L3 - No power
The various possible values are:l0(0), l1(1), l2(2), l3(3)." The various possible values are:l0(1), l1(2), l2(3), l3(4)."
REFERENCE "ITU-T G.997.1, paragraph 7.5.1.2" REFERENCE "ITU-T G.997.1, paragraph 7.5.1.2"
::= { adsl2LineEntry 8 } ::= { adsl2LineEntry 8 }
adsl2LineStatusInitResult OBJECT-TYPE adsl2LineStatusInitResult OBJECT-TYPE
SYNTAX Adsl2InitResult SYNTAX Adsl2InitResult
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates the result of the last full initialization performed "Indicates the result of the last full initialization performed
on the line. It is an enumeration type with the following on the line. It is an enumeration type with the following
values: noFailure(0), configError(1), configNotFeasible(2), values: noFail(0), configError(1), configNotFeasible(2),
commFail(3), noPeerAtu(4), otherCause(5)." commFail(3), noPeerAtu(4), otherCause(5)."
REFERENCE "ITU-T G.997.1, paragraph 7.5.1.3" REFERENCE "ITU-T G.997.1, paragraph 7.5.1.3"
::= { adsl2LineEntry 9 } ::= { adsl2LineEntry 9 }
adsl2LineStatusLastStateDs OBJECT-TYPE adsl2LineStatusLastStateDs OBJECT-TYPE
SYNTAX Adsl2LastTransmittedState SYNTAX Adsl2LastTransmittedState
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The last successful transmitted initialization state in "The last successful transmitted initialization state in
the downstream direction in the last full initialization the downstream direction in the last full initialization
performed on the line. States are per the specific ADSL type performed on the line. "
and are counted from 0 (if G.994.1 is used) or 1 (if G.994.1
is not used) up to Showtime."
REFERENCE "ITU-T G.997.1, paragraph 7.5.1.4" REFERENCE "ITU-T G.997.1, paragraph 7.5.1.4"
::= { adsl2LineEntry 10 } ::= { adsl2LineEntry 10 }
adsl2LineStatusLastStateUs OBJECT-TYPE adsl2LineStatusLastStateUs OBJECT-TYPE
SYNTAX Adsl2LastTransmittedState SYNTAX Adsl2LastTransmittedState
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The last successful transmitted initialization state in the "The last successful transmitted initialization state in the
upstream direction in the last full initialization performed upstream direction in the last full initialization performed
on the line. States are per the specific ADSL type and are on the line. "
counted from 0 (if G.994.1 is used) or 1 (if G.994.1 is not
used) up to Showtime."
REFERENCE "ITU-T G.997.1, paragraph 7.5.1.5" REFERENCE "ITU-T G.997.1, paragraph 7.5.1.5"
::= { adsl2LineEntry 11 } ::= { adsl2LineEntry 11 }
adsl2LineStatusAtur OBJECT-TYPE adsl2LineStatusAtur OBJECT-TYPE
SYNTAX Adsl2LineStatus SYNTAX Adsl2LineStatus
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates current state (existing failures) of the ATU-R. "Indicates current state (existing failures) of the ATU-R.
This is a bit-map of possible conditions. The various bit This is a bit-map of possible conditions."
positions are: noFailure(0), lossOfFraming(1),
lossOfSignal(2), lossOfPower(3),
initFailure(4) - never active on ATU-R"
REFERENCE "ITU-T G.997.1, paragraph 7.1.1.2" REFERENCE "ITU-T G.997.1, paragraph 7.1.1.2"
::= { adsl2LineEntry 12 } ::= { adsl2LineEntry 12 }
adsl2LineStatusAtuc OBJECT-TYPE adsl2LineStatusAtuc OBJECT-TYPE
SYNTAX Adsl2LineStatus SYNTAX Adsl2LineStatus
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates current state (existing failures) of the ATU-C. "Indicates current state (existing failures) of the ATU-C.
This is a bit-map of possible conditions. The various bit This is a bit-map of possible conditions. "
positions are: noFailure(0), lossOfFraming(1),
lossOfSignal(2), lossOfPower(3), initFailure(4)"
REFERENCE "ITU-T G.997.1, paragraph 7.1.1.1" REFERENCE "ITU-T G.997.1, paragraph 7.1.1.1"
::= { adsl2LineEntry 13 } ::= { adsl2LineEntry 13 }
adsl2LineStatusLnAttenDs OBJECT-TYPE adsl2LineStatusLnAttenDs OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32 (0..1270 | 2147483646 | 2147483647)
UNITS "0.1 dB" UNITS "0.1 dB"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The measured difference in the total power transmitted by the "The measured difference in the total power transmitted by the
ATU-C and the total power received by the ATU-R over all sub- ATU-C and the total power received by the ATU-R over all sub-
carriers during diagnostics mode and initialization. It carriers during diagnostics mode and initialization. It
ranges from 0 to 1270 units of 0.1 dB (Physical values ranges from 0 to 1270 units of 0.1 dB (Physical values
are 0 to 127 dB). A value of all 1's indicates the line are 0 to 127 dB).
attenuation is out of range to be represented." A special value of 0x7FFFFFFF (2147483647) indicates the line
attenuation is out of range to be represented.
A special value of 0x7FFFFFFE (2147483646) indicates the line
attenuation measurement is currently unavailable."
REFERENCE "ITU-T G.997.1, paragraph 7.5.1.6" REFERENCE "ITU-T G.997.1, paragraph 7.5.1.6"
::= { adsl2LineEntry 14 } ::= { adsl2LineEntry 14 }
adsl2LineStatusLnAttenUs OBJECT-TYPE adsl2LineStatusLnAttenUs OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32 (0..1270 | 2147483646 | 2147483647)
UNITS "0.1 dB" UNITS "0.1 dB"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The measured difference in the total power transmitted by the "The measured difference in the total power transmitted by the
ATU-R and the total power received by the ATU-C over all sub- ATU-R and the total power received by the ATU-C over all sub-
carriers during diagnostics mode and initialization. carriers during diagnostics mode and initialization.
It ranges from 0 to 1270 units of 0.1 dB (Physical values are It ranges from 0 to 1270 units of 0.1 dB (Physical values are
0 to 127 dB). A value of all 1's indicates the line 0 to 127 dB).
attenuation is out of range to be represented." A special value of 0x7FFFFFFF (2147483647) indicates the line
attenuation is out of range to be represented.
A special value of 0x7FFFFFFE (2147483646) indicates the line
attenuation measurement is currently unavailable."
REFERENCE "ITU-T G.997.1, paragraph 7.5.1.7" REFERENCE "ITU-T G.997.1, paragraph 7.5.1.7"
::= { adsl2LineEntry 15 } ::= { adsl2LineEntry 15 }
adsl2LineStatusSigAttenDs OBJECT-TYPE adsl2LineStatusSigAttenDs OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32 (0..1270 | 2147483646 | 2147483647)
UNITS "0.1 dB" UNITS "0.1 dB"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The measured difference in the total power transmitted by the "The measured difference in the total power transmitted by the
ATU-C and the total power received by the ATU-R over all sub- ATU-C and the total power received by the ATU-R over all sub-
carriers during Showtime. It ranges from 0 to 1270 units of carriers during Showtime. It ranges from 0 to 1270 units of
0.1 dB (Physical values are 0 to 127 dB). A value of all 0.1 dB (Physical values are 0 to 127 dB).
1's indicates the line attenuation is out of range to be A special value of 0x7FFFFFFF (2147483647) indicates the
represented." signal attenuation is out of range to be represented.
A special value of 0x7FFFFFFE (2147483646) indicates the
signal attenuation measurement is currently unavailable."
REFERENCE "ITU-T G.997.1, paragraph 7.5.1.8" REFERENCE "ITU-T G.997.1, paragraph 7.5.1.8"
::= { adsl2LineEntry 16 } ::= { adsl2LineEntry 16 }
adsl2LineStatusSigAttenUs OBJECT-TYPE adsl2LineStatusSigAttenUs OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32 (0..1270 | 2147483646 | 2147483647)
UNITS "0.1 dB" UNITS "0.1 dB"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The measured difference in the total power transmitted by the "The measured difference in the total power transmitted by the
ATU-R and the total power received by the ATU-C over all sub- ATU-R and the total power received by the ATU-C over all sub-
carriers during Showtime. It ranges from 0 to 1270 units of carriers during Showtime. It ranges from 0 to 1270 units of
0.1 dB (Physical values are 0 to 127 dB). A value of all 0.1 dB (Physical values are 0 to 127 dB).
1's indicates the line attenuation is out of range to be A special value of 0x7FFFFFFF (2147483647) indicates the
represented." signal attenuation is out of range to be represented.
A special value of 0x7FFFFFFE (2147483646) indicates the
signal attenuation measurement is currently unavailable."
REFERENCE "ITU-T G.997.1, paragraph 7.5.1.9" REFERENCE "ITU-T G.997.1, paragraph 7.5.1.9"
::= { adsl2LineEntry 17 } ::= { adsl2LineEntry 17 }
adsl2LineStatusSnrMarginDs OBJECT-TYPE adsl2LineStatusSnrMarginDs OBJECT-TYPE
SYNTAX Integer32 SYNTAX Integer32 (-640..630 | 2147483646 | 2147483647)
UNITS "0.1 dB" UNITS "0.1 dB"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Downstream SNR Margin is the maximum increase in dB of the "Downstream SNR Margin is the maximum increase in dB of the
noise power received at the ATU-R, such that the BER noise power received at the ATU-R, such that the BER
requirements are met for all downstream bearer channels. It requirements are met for all downstream bearer channels. It
ranges from -640 to 630 units of 0.1 dB (Physical values are ranges from -640 to 630 units of 0.1 dB (Physical values are
-64 to 63 dB). A value of all 1's indicates the line -64 to 63 dB).
attenuation is out of range to be represented." A special value of 0x7FFFFFFF (2147483647) indicates the
SNR Margin is out of range to be represented.
A special value of 0x7FFFFFFE (2147483646) indicates the
SNR Margin measurement is currently unavailable."
REFERENCE "ITU-T G.997.1, paragraph 7.5.1.10" REFERENCE "ITU-T G.997.1, paragraph 7.5.1.10"
::= { adsl2LineEntry 18 } ::= { adsl2LineEntry 18 }
adsl2LineStatusSnrMarginUs OBJECT-TYPE adsl2LineStatusSnrMarginUs OBJECT-TYPE
SYNTAX Integer32 SYNTAX Integer32 (-640..630 | 2147483646 | 2147483647)
UNITS "0.1 dB" UNITS "0.1 dB"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Upstream SNR Margin is the maximum increase in dB of the noise "Upstream SNR Margin is the maximum increase in dB of the noise
power received at the ATU-C, such that the BER requirements power received at the ATU-C, such that the BER requirements
are met for all downstream bearer channels. It ranges from are met for all downstream bearer channels. It ranges from
-640 to 630 units of 0.1 dB (Physical values are -64 to -640 to 630 units of 0.1 dB (Physical values are -64 to
63 dB). A value of all 1's indicates the line attenuation 63 dB).
is out of range to be represented." A special value of 0x7FFFFFFF (2147483647) indicates the
SNR Margin is out of range to be represented.
A special value of 0x7FFFFFFE (2147483646) indicates the
SNR Margin measurement is currently unavailable."
REFERENCE "ITU-T G.997.1, paragraph 7.5.1.11" REFERENCE "ITU-T G.997.1, paragraph 7.5.1.11"
::= { adsl2LineEntry 19 } ::= { adsl2LineEntry 19 }
adsl2LineStatusAttainableRateDs OBJECT-TYPE adsl2LineStatusAttainableRateDs OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "bits/second" UNITS "bits/second"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Maximum Attainable Data Rate Downstream. "Maximum Attainable Data Rate Downstream.
skipping to change at page 51, line 16 skipping to change at page 51, line 15
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Maximum Attainable Data Rate Upstream. "Maximum Attainable Data Rate Upstream.
The maximum upstream net data rate currently attainable by the The maximum upstream net data rate currently attainable by the
ATU-R transmitter and the ATU-C receiver, coded in bit/s." ATU-R transmitter and the ATU-C receiver, coded in bit/s."
REFERENCE "ITU-T G.997.1, paragraph 7.5.1.13" REFERENCE "ITU-T G.997.1, paragraph 7.5.1.13"
::= { adsl2LineEntry 21 } ::= { adsl2LineEntry 21 }
adsl2LineStatusActPsdDs OBJECT-TYPE adsl2LineStatusActPsdDs OBJECT-TYPE
SYNTAX Integer32 SYNTAX Integer32 (-900..0 | 2147483647)
UNITS "0.1 dB" UNITS "0.1 dB"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Actual Power Spectrum Density (PSD) Downstream. The average "Actual Power Spectrum Density (PSD) Downstream. The average
downstream transmit PSD over the sub-carriers used for downstream transmit PSD over the sub-carriers used for
downstream. It ranges from -900 to 0 units of 0.1 dB downstream. It ranges from -900 to 0 units of 0.1 dB
(Physical values are -90 to 0 dBm/Hz). A value of all 1's (Physical values are -90 to 0 dBm/Hz).
indicates the measurement is out of range to be represented." A value of 0x7FFFFFFF (2147483647) indicates the measurement
is out of range to be represented."
REFERENCE "ITU-T G.997.1, paragraph 7.5.1.14" REFERENCE "ITU-T G.997.1, paragraph 7.5.1.14"
::= { adsl2LineEntry 22 } ::= { adsl2LineEntry 22 }
adsl2LineStatusActPsdUs OBJECT-TYPE adsl2LineStatusActPsdUs OBJECT-TYPE
SYNTAX Integer32 SYNTAX Integer32 (-900..0 | 2147483647)
UNITS "0.1 dB" UNITS "0.1 dB"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Actual Power Spectrum Density (PSD) Upstream. The average "Actual Power Spectrum Density (PSD) Upstream. The average
upstream transmit PSD over the sub-carriers used for upstream. upstream transmit PSD over the sub-carriers used for upstream.
It ranges from -900 to 0 units of 0.1 dB (Physical values It ranges from -900 to 0 units of 0.1 dB (Physical values
are -90 to 0 dBm/Hz). A value of all 1's indicates the are -90 to 0 dBm/Hz).
measurement is out of range to be represented." A value of 0x7FFFFFFF (2147483647) indicates the measurement
is out of range to be represented."
REFERENCE "ITU-T G.997.1, paragraph 7.5.1.15" REFERENCE "ITU-T G.997.1, paragraph 7.5.1.15"
::= { adsl2LineEntry 23 } ::= { adsl2LineEntry 23 }
adsl2LineStatusActAtpDs OBJECT-TYPE adsl2LineStatusActAtpDs OBJECT-TYPE
SYNTAX Integer32 SYNTAX Integer32 (-310..310 | 2147483647)
UNITS "0.1 dB" UNITS "0.1 dB"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Actual Aggregate Transmit Power Downstream. The total amount "Actual Aggregate Transmit Power Downstream. The total amount
of transmit power delivered by the ATU-C at the U-C reference of transmit power delivered by the ATU-C at the U-C reference
point, at the instant of measurement. It ranges from -310 to point, at the instant of measurement. It ranges from -310 to
310 units of 0.1 dB (Physical values are -31 to 31 dBm). A 310 units of 0.1 dB (Physical values are -31 to 31 dBm).
value of all 1's indicates the measurement is out of range to A value of 0x7FFFFFFF (2147483647) indicates the measurement
be represented." is out of range to be represented."
REFERENCE "ITU-T G.997.1, paragraph 7.5.1.16" REFERENCE "ITU-T G.997.1, paragraph 7.5.1.16"
::= { adsl2LineEntry 24 } ::= { adsl2LineEntry 24 }
adsl2LineStatusActAtpUs OBJECT-TYPE adsl2LineStatusActAtpUs OBJECT-TYPE
SYNTAX Integer32 SYNTAX Integer32 (-310..310 | 2147483647)
UNITS "0.1 dB" UNITS "0.1 dB"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Actual Aggregate Transmit Power Upstream. The total amount of "Actual Aggregate Transmit Power Upstream. The total amount of
transmit power delivered by the ATU-R at the U-R transmit power delivered by the ATU-R at the U-R
reference point, at the instant of measurement. It ranges reference point, at the instant of measurement. It ranges
from -310 to 310 units of 0.1 dB (Physical values are -31 from -310 to 310 units of 0.1 dB (Physical values are -31
to 31 dBm). A value of all 1's indicates the measurement to 31 dBm).
A value of 0x7FFFFFFF (2147483647) indicates the measurement
is out of range to be represented." is out of range to be represented."
REFERENCE "ITU-T G.997.1, paragraph 7.5.1.17" REFERENCE "ITU-T G.997.1, paragraph 7.5.1.17"
::= { adsl2LineEntry 25 } ::= { adsl2LineEntry 25 }
------------------------------------------------ ------------------------------------------------
-- adsl2ChannelStatusTable -- -- adsl2ChannelStatusTable --
------------------------------------------------ ------------------------------------------------
adsl2ChannelStatusTable OBJECT-TYPE adsl2ChannelStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF Adsl2ChannelStatusEntry SYNTAX SEQUENCE OF Adsl2ChannelStatusEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table adsl2ChannelStatusTable contains status "The table adsl2ChannelStatusTable contains status
parameters of ADSL2 channel. This table contains live data parameters of ADSL2 channel. This table contains live data
from equipment. As such, it is NOT persistent." from equipment. "
::= { adsl2Status 1 } ::= { adsl2Status 1 }
adsl2ChannelStatusEntry OBJECT-TYPE adsl2ChannelStatusEntry OBJECT-TYPE
SYNTAX Adsl2ChannelStatusEntry SYNTAX Adsl2ChannelStatusEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table adsl2ChannelStatusTable contains status "The table adsl2ChannelStatusTable contains status
parameters of ADSL2 channel. parameters of ADSL2 channel.
The index of this table is an interface index where The index of this table is an interface index where
skipping to change at page 54, line 36 skipping to change at page 54, line 38
::= { adsl2ChannelStatusEntry 5 } ::= { adsl2ChannelStatusEntry 5 }
adsl2ChStatusAtmStatus OBJECT-TYPE adsl2ChStatusAtmStatus OBJECT-TYPE
SYNTAX Adsl2ChAtmStatus SYNTAX Adsl2ChAtmStatus
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates current state (existing failures) of the ADSL "Indicates current state (existing failures) of the ADSL
channel in case its Data Path is ATM. This is a bit-map of channel in case its Data Path is ATM. This is a bit-map of
possible conditions. The various bit positions are: possible conditions. The various bit positions are:
noFailure(0), noDefect (0),
noCellDelineation(1), noCellDelineation(1),
lossOfCellDelineation (2). lossOfCellDelineation (2).
In case the channel is not of ATM Data Path the object is set In case the channel is not of ATM Data Path the object is set
to '0'." to '0'."
REFERENCE "ITU-T G.997.1, paragraph 7.1.4" REFERENCE "ITU-T G.997.1, paragraph 7.1.4"
::= { adsl2ChannelStatusEntry 6 } ::= { adsl2ChannelStatusEntry 6 }
adsl2ChStatusPtmStatus OBJECT-TYPE adsl2ChStatusPtmStatus OBJECT-TYPE
SYNTAX Adsl2ChPtmStatus SYNTAX Adsl2ChPtmStatus
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates current state (existing failures) of the ADSL "Indicates current state (existing failures) of the ADSL
channel in case its Data Path is PTM. This is a bit-map of channel in case its Data Path is PTM. This is a bit-map of
possible conditions. The various bit positions are: possible conditions. The various bit positions are:
noDefect (0),
noFailure(0),
outOfSync (1). outOfSync (1).
In case the channel is not of PTM Data Path the object is set In case the channel is not of PTM Data Path the object is set
to '0'." to '0'."
REFERENCE "ITU-T G.997.1, paragraph 7.1.5" REFERENCE "ITU-T G.997.1, paragraph 7.1.5"
::= { adsl2ChannelStatusEntry 7 } ::= { adsl2ChannelStatusEntry 7 }
------------------------------------------------ ------------------------------------------------
-- Scalars that relate to the adsl2SCStatusTable. -- Scalars that relate to the adsl2SCStatusTable.
------------------------------------------------ ------------------------------------------------
skipping to change at page 55, line 47 skipping to change at page 55, line 48
------------------------------------------------ ------------------------------------------------
-- adsl2SCStatusTable -- -- adsl2SCStatusTable --
------------------------------------------------ ------------------------------------------------
adsl2SCStatusTable OBJECT-TYPE adsl2SCStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF Adsl2SCStatusEntry SYNTAX SEQUENCE OF Adsl2SCStatusEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table adsl2SCStatusTable contains status parameters "The table adsl2SCStatusTable contains status parameters
of ADSL2 sub-carriers. This table contains live data of ADSL2 sub-carriers. The following points apply to this
from equipment. As such, it is NOT persistent." table :
1. The main purpose of this table is to hold the results
of a DELT test.
2. This table also holds parameters obtained at line
initialization time.
3. The rows in this table are volatile. That is they are
lost if the SNMP agent is rebooted.
4. Due to the large OCTET STRING attributes in this table,
the worst case memory requirements for this table are
very high. The manager may use the row status attribute
of this table to delete rows in order to reclaim memory.
5. The manager may create rows in this table. The SNMP
agent may create rows in this table. Only the manager
may delete rows in this table.
6. The maximum number of rows allowable in this table is
indicated by the scalar attribute
adsl2ScalarSCMaxInterfaces.
The number of rows available in this table is indicated
by the scalar attribute adsl2ScalarSCAvailInterfaces.
7. The SNMP agent is permitted to create rows in this table
when a DELT test completes successfully or when line
initialization occurs. It is not mandatory for the SNMP
agent to create rows in this table, hence it may be
necessary for the manager to create rows in this table
before any results can be stored.
8. If the manager attempts to create a row in this table
and there are no more rows available, the creation
attempt will fail and the response to the SNMP SET PDU
will contain the error noCreation(11).
9. If the SNMP agent attempts to create a row in this table
and there are no more rows available, the creation
attempt will fail and the attribute
adsl2LineCmndConfLdsfFailReason will indicate the
reason for the failure. The failure reason will be either
tableFull(10) or noResources(11).
10. An example of use of this table is as follows:
Step 1. : The DELT test is started by setting the
: adsl2LineCmndConfLdsf from inhibit to force.
Step 2. : The DELT test completes and valid data is
: available.
Step 3. : The row in the adsl2SCStatusTable where the
: results will be stored does not yet exist so
: the SNMP agent attempts to create the row.
Step 4. : Due to a low memory condition, a row in the
: adsl2SCStatusTable table cannot be created at
: this time.
Step 5. : The reason for the failure, tableFull(10), is
: indicated in the adsl2LineCmndConfLdsfFailReason
: attribute.
11. Another example of use of this table is as follows:
Step 1. : The DELT test is started by setting the
: adsl2LineCmndConfLdsf from inhibit to force.
Step 2. : The DELT test completes and valid data is
: available.
Step 3. : The row in the adsl2SCStatusTable where the
: results will be stored does not yet exist so
: the SNMP agent attempts to create the row.
Step 4. : The row creation is successful.
Step 5. : The value of the attribute
: adsl2LineCmndConfLdsfFailReasonreason is set
: to success(2).
12. Another example of use of this table is as follows:
Step 1. : The manager creates a row in adsl2SCStatusTable
: for a particular ADSL2 line.
Step 2. : The DELT test is started on the above mentioned
: line by setting the adsl2LineCmndConfLdsf from
: inhibit to force.
Step 3. : The DELT test completes and valid data is
: available.
Step 4. : The value of the attribute
: adsl2LineCmndConfLdsfFailReasonreason is set
: to success(2)."
::= { adsl2Status 2 } ::= { adsl2Status 2 }
adsl2SCStatusEntry OBJECT-TYPE adsl2SCStatusEntry OBJECT-TYPE
SYNTAX Adsl2SCStatusEntry SYNTAX Adsl2SCStatusEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table Hfadsl2SCStatusEntry contains status parameters "The table Hfadsl2SCStatusEntry contains status parameters
of ADSL2 sub-carriers. of ADSL2 sub-carriers.
The index of this table is an interface index where the The index of this table is an interface index where the
skipping to change at page 57, line 23 skipping to change at page 58, line 49
and paragraph 7.5.1.20.3 (SNRMTus)" and paragraph 7.5.1.20.3 (SNRMTus)"
::= { adsl2SCStatusEntry 2 } ::= { adsl2SCStatusEntry 2 }
adsl2SCStatusSnr OBJECT-TYPE adsl2SCStatusSnr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..512)) SYNTAX OCTET STRING (SIZE(0..512))
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The SNR Margin per sub-carrier, expressing the ratio between "The SNR Margin per sub-carrier, expressing the ratio between
the received signal power and received noise power per the received signal power and received noise power per
subscriber. It is an array of 512 bytes, designed for subscriber. It is an array of 512 octets, designed for
supporting up to 512 (downstream) sub-carriers. supporting up to 512 (downstream) sub-carriers.
The number of utilized octets on downstream direction depends The number of utilized octets on downstream direction depends
on NSCds, and on upstream direction it depends on NSCus. This on NSCds, and on upstream direction it depends on NSCus. This
value is referred here as NSC. value is referred here as NSC.
Byte i (0 <= i < NSC) is set to a value in the range 0 to Octet i (0 <= i < NSC) is set to a value in the range 0 to
254 to indicate that the respective downstream or upstream sub- 254 to indicate that the respective downstream or upstream sub-
carrier i has SNR of: (-32 + Adsl2SubcarrierSnr(i)/2) in dB carrier i has SNR of: (-32 + Adsl2SubcarrierSnr(i)/2) in dB
(i.e., -32 to 95dB). (i.e., -32 to 95dB).
The special value 255 means that no measurement could be done The special value 255 means that no measurement could be done
for the subcarrier because it is out of the PSD mask passband for the subcarrier because it is out of the PSD mask passband
or that the noise PSD is out of range to be represented. or that the noise PSD is out of range to be represented.
Each value in this array is 8 bits wide." Each value in this array is 8 bits wide."
REFERENCE "ITU-T G.997.1, paragraph 7.5.1.20.2 (SNRpsds) REFERENCE "ITU-T G.997.1, paragraph 7.5.1.20.2 (SNRpsds)
and paragraph 7.5.1.20.4 (SNRpsus)" and paragraph 7.5.1.20.4 (SNRpsus)"
::= { adsl2SCStatusEntry 3 } ::= { adsl2SCStatusEntry 3 }
adsl2SCStatusBitsAlloc OBJECT-TYPE adsl2SCStatusBitsAlloc OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256)) SYNTAX OCTET STRING (SIZE(0..256))
UNITS "bits" UNITS "bits"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The bits allocation per sub-carrier. An array of 256 bytes "The bits allocation per sub-carrier. An array of 256 octets
(512 nibbles), designed for supporting up to 512 (downstream) (512 nibbles), designed for supporting up to 512 (downstream)
sub-carriers. sub-carriers.
The number of utilized nibbles on downstream direction depends The number of utilized nibbles on downstream direction depends
on NSCds, and on upstream direction it depends on NSCus. This on NSCds, and on upstream direction it depends on NSCus. This
value is referred here as NSC. value is referred here as NSC.
Nibble i (0 <= i < NSC) is set to a value in the range 0 Nibble i (0 <= i < NSC) is set to a value in the range 0
to 15 to indicate that the respective downstream or upstream to 15 to indicate that the respective downstream or upstream
sub-carrier i has the same amount of bits allocation." sub-carrier i has the same amount of bits allocation."
REFERENCE "ITU-T G.997.1, paragraph 7.5.1.21.1 (BITSpsds) REFERENCE "ITU-T G.997.1, paragraph 7.5.1.21.1 (BITSpsds)
and paragraph 7.5.1.21.2 (BITSpsus)" and paragraph 7.5.1.21.2 (BITSpsus)"
::= { adsl2SCStatusEntry 4 } ::= { adsl2SCStatusEntry 4 }
adsl2SCStatusGainAlloc OBJECT-TYPE adsl2SCStatusGainAlloc OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..1024)) SYNTAX OCTET STRING (SIZE(0..1024))
MAX-ACCESS read-only MAX-ACCESS read-only
skipping to change at page 62, line 17 skipping to change at page 63, line 43
measurement could be done for the subcarrier because it is out measurement could be done for the subcarrier because it is out
of the passband or that the noise PSD is out of range to be of the passband or that the noise PSD is out of range to be
represented. represented.
This parameter is applicable in loop diagnostic procedure and This parameter is applicable in loop diagnostic procedure and
initialization. Each value in this array is 8 bits wide." initialization. Each value in this array is 8 bits wide."
REFERENCE "ITU-T G.997.1, paragraph 7.5.1.19.2 (QLNpsds) REFERENCE "ITU-T G.997.1, paragraph 7.5.1.19.2 (QLNpsds)
and paragraph 7.5.1.19.4 (QLNpsus)" and paragraph 7.5.1.19.4 (QLNpsus)"
::= { adsl2SCStatusEntry 13 } ::= { adsl2SCStatusEntry 13 }
adsl2SCStatusLnAtten OBJECT-TYPE adsl2SCStatusLnAtten OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32 (0..1270 | 2147483646 | 2147483647)
UNITS "0.1 dB" UNITS "0.1 dB"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"When referring to the downstream direction, it is the measured "When referring to the downstream direction, it is the measured
difference in the total power transmitted by the ATU-C and the difference in the total power transmitted by the ATU-C and the
total power received by the ATU-R over all sub-carriers during total power received by the ATU-R over all sub-carriers during
diagnostics mode. diagnostics mode.
When referring to the upstream direction, it is the measured When referring to the upstream direction, it is the measured
difference in the total power transmitted by the ATU-R and the difference in the total power transmitted by the ATU-R and the
total power received by the ATU-C over all sub-carriers during total power received by the ATU-C over all sub-carriers during
diagnostics mode. diagnostics mode.
It ranges from 0 to 1270 units of 0.1 dB (Physical values are It ranges from 0 to 1270 units of 0.1 dB (Physical values are
0 to 127 dB). A value of all 1's indicates the line 0 to 127 dB).
A special value of 0x7FFFFFFF (2147483647) indicates the line
attenuation is out of range to be represented. attenuation is out of range to be represented.
A special value of 0x7FFFFFFE (2147483646) indicates the line
attenuation measurement is unavailable.
This object reflects the value of the parameter following the This object reflects the value of the parameter following the
most recent DELT performed on the associated line. Once most recent DELT performed on the associated line. Once
the DELT process is over, the parameter no longer changes the DELT process is over, the parameter no longer changes
until the row is deleted or a new DELT process is initiated. " until the row is deleted or a new DELT process is initiated. "
REFERENCE "ITU-T G.997.1, paragraph 7.5.1.6 (LATNds) REFERENCE "ITU-T G.997.1, paragraph 7.5.1.6 (LATNds)
and paragraph 7.5.1.7 (LATNus)" and paragraph 7.5.1.7 (LATNus)"
::= { adsl2SCStatusEntry 14 } ::= { adsl2SCStatusEntry 14 }
adsl2SCStatusSigAtten OBJECT-TYPE adsl2SCStatusSigAtten OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32 (0..1270 | 2147483646 | 2147483647)
UNITS "0.1 dB" UNITS "0.1 dB"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"When referring to the downstream direction, it is the measured "When referring to the downstream direction, it is the measured
difference in the total power transmitted by the difference in the total power transmitted by the
ATU-C and the total power received by the ATU-R over all sub ATU-C and the total power received by the ATU-R over all sub
carriers during Showtime after the diagnostics mode. carriers during Showtime after the diagnostics mode.
When referring to the upstream direction, it is the measured When referring to the upstream direction, it is the measured
difference in the total power transmitted by the difference in the total power transmitted by the
ATU-R and the total power received by the ATU-C over all sub ATU-R and the total power received by the ATU-C over all sub
carriers during Showtime after the diagnostics mode. carriers during Showtime after the diagnostics mode.
It ranges from 0 to 1270 units of 0.1 dB (Physical values It ranges from 0 to 1270 units of 0.1 dB (Physical values
are 0 to 127 dB). A value of all 1's indicates the line are 0 to 127 dB).
attenuation is out of range to be represented. A special value of 0x7FFFFFFF (2147483647) indicates the
signal attenuation is out of range to be represented.
A special value of 0x7FFFFFFE (2147483646) indicates the
signal attenuation measurement is unavailable.
This object reflects the value of the parameter following the This object reflects the value of the parameter following the
most recent DELT performed on the associated line. Once most recent DELT performed on the associated line. Once
the DELT process is over, the parameter no longer changes the DELT process is over, the parameter no longer changes
until the row is deleted or a new DELT process is initiated. " until the row is deleted or a new DELT process is initiated. "
REFERENCE "ITU-T G.997.1, paragraph 7.5.1.8 (SATNds) REFERENCE "ITU-T G.997.1, paragraph 7.5.1.8 (SATNds)
and paragraph 7.5.1.9 (SATNus)" and paragraph 7.5.1.9 (SATNus)"
::= { adsl2SCStatusEntry 15 } ::= { adsl2SCStatusEntry 15 }
adsl2SCStatusSnrMargin OBJECT-TYPE adsl2SCStatusSnrMargin OBJECT-TYPE
SYNTAX Integer32 SYNTAX Integer32 (-640..630 | 2147483646 | 2147483647)
UNITS "0.1 dB" UNITS "0.1 dB"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"SNR Margin is the maximum increase in dB of the noise power "SNR Margin is the maximum increase in dB of the noise power
received at the ATU (ATU-R on downstream direction and ATU-C received at the ATU (ATU-R on downstream direction and ATU-C
on upstream direction), such that the BER requirements are met on upstream direction), such that the BER requirements are met
for all bearer channels received at the ATU. It ranges from for all bearer channels received at the ATU. It ranges from
-640 to 630 units of 0.1 dB (Physical values are -64 to -640 to 630 units of 0.1 dB (Physical values are -64 to
63 dB). A value of all 1's indicates the SNR margin is 63 dB).
out of range to be represented. A special value of 0x7FFFFFFF (2147483647) indicates the
SNR Margin is out of range to be represented.
A special value of 0x7FFFFFFE (2147483646) indicates the
SNR Margin measurement is currently unavailable.
This object reflects the value of the parameter following the This object reflects the value of the parameter following the
most recent DELT performed on the associated line. Once most recent DELT performed on the associated line. Once
the DELT process is over, the parameter no longer changes the DELT process is over, the parameter no longer changes
until the row is deleted or a new DELT process is initiated. " until the row is deleted or a new DELT process is initiated. "
REFERENCE "ITU-T G.997.1, paragraph 7.5.1.10 (SNRMds) REFERENCE "ITU-T G.997.1, paragraph 7.5.1.10 (SNRMds)
and paragraph 7.5.1.11 (SNRMus)" and paragraph 7.5.1.11 (SNRMus)"
::= { adsl2SCStatusEntry 16 } ::= { adsl2SCStatusEntry 16 }
adsl2SCStatusAttainableRate OBJECT-TYPE adsl2SCStatusAttainableRate OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
skipping to change at page 64, line 31 skipping to change at page 66, line 19
This object reflects the value of the parameter following the This object reflects the value of the parameter following the
most recent DELT performed on the associated line. Once most recent DELT performed on the associated line. Once
the DELT process is over, the parameter no longer changes the DELT process is over, the parameter no longer changes
until the row is deleted or a new DELT process is initiated. " until the row is deleted or a new DELT process is initiated. "
REFERENCE "ITU-T G.997.1, paragraph 7.5.1.14 (ACTPSDds) REFERENCE "ITU-T G.997.1, paragraph 7.5.1.14 (ACTPSDds)
and paragraph 7.5.1.15 (ACTPSDus)" and paragraph 7.5.1.15 (ACTPSDus)"
::= { adsl2SCStatusEntry 18 } ::= { adsl2SCStatusEntry 18 }
adsl2SCStatusRowStatus OBJECT-TYPE adsl2SCStatusRowStatus OBJECT-TYPE
SYNTAX RowStatus SYNTAX RowStatus
MAX-ACCESS read-write MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Row Status. The SNMP agent should create a row in this "Row Status. The manager may create and delete rows
table for storing the results of a DELT performed on the of this table. Please see the description of
associated line, if such a row does not already exist. adsl2SCStatusTable above for more details."
The SNMP agent may have limited resources; therefore, if
multiple rows co-exist in the table, it may fail to add
new rows to the table or allocate memory resources for a new
DELT process. If that occurs, the SNMP agent responds with
either the value 'tableFull' or the value
'noResources' (for adsl2LineCmndConfLdsfFailReason
object in adsl2LineTable)
The management system (the operator) may delete rows according
to any scheme. E.g., after retrieving the results."
::= { adsl2SCStatusEntry 19 } ::= { adsl2SCStatusEntry 19 }
------------------------------------------------ ------------------------------------------------
-- adsl2LineInventoryTable -- -- adsl2LineInventoryTable --
------------------------------------------------ ------------------------------------------------
adsl2LineInventoryTable OBJECT-TYPE adsl2LineInventoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF Adsl2LineInventoryEntry SYNTAX SEQUENCE OF Adsl2LineInventoryEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table adsl2LineInventoryTable contains inventory of ADSL2 "The table adsl2LineInventoryTable contains inventory of ADSL2
unit. The objects in this table are NOT persistent." unit. "
::= { adsl2Inventory 1 } ::= { adsl2Inventory 1 }
adsl2LineInventoryEntry OBJECT-TYPE adsl2LineInventoryEntry OBJECT-TYPE
SYNTAX Adsl2LineInventoryEntry SYNTAX Adsl2LineInventoryEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table adsl2LineInventoryTable contains inventory of ADSL2 "The table adsl2LineInventoryTable contains inventory of ADSL2
unit. unit.
The index of this table is an interface index where the The index of this table is an interface index where the
skipping to change at page 65, line 23 skipping to change at page 67, line 4
SYNTAX Adsl2LineInventoryEntry SYNTAX Adsl2LineInventoryEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table adsl2LineInventoryTable contains inventory of ADSL2 "The table adsl2LineInventoryTable contains inventory of ADSL2
unit. unit.
The index of this table is an interface index where the The index of this table is an interface index where the
interface has an ifType of adsl2(230)." interface has an ifType of adsl2(230)."
INDEX { ifIndex, adsl2LInvUnit } INDEX { ifIndex, adsl2LInvUnit }
::= { adsl2LineInventoryTable 1 } ::= { adsl2LineInventoryTable 1 }
Adsl2LineInventoryEntry ::= Adsl2LineInventoryEntry ::=
SEQUENCE { SEQUENCE {
adsl2LInvUnit Adsl2Unit, adsl2LInvUnit Adsl2Unit,
adsl2LInvG994VendorId OCTET STRING, adsl2LInvG994VendorId OCTET STRING,
adsl2LInvSystemVendorId OCTET STRING, adsl2LInvSystemVendorId OCTET STRING,
adsl2LInvVersionNumber OCTET STRING, adsl2LInvVersionNumber OCTET STRING,
adsl2LInvSerialNumber OCTET STRING, adsl2LInvSerialNumber OCTET STRING,
adsl2LInvSelfTestResult OCTET STRING, adsl2LInvSelfTestResult Unsigned32,
adsl2LInvTransmissionCapabilities Adsl2TransmissionModeType adsl2LInvTransmissionCapabilities Adsl2TransmissionModeType
} }
adsl2LInvUnit OBJECT-TYPE adsl2LInvUnit OBJECT-TYPE
SYNTAX Adsl2Unit SYNTAX Adsl2Unit
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The termination unit ATUC{1} or ATUR{2}." "The termination unit ATUC{1} or ATUR{2}."
::= { adsl2LineInventoryEntry 1 } ::= { adsl2LineInventoryEntry 1 }
adsl2LInvG994VendorId OBJECT-TYPE adsl2LInvG994VendorId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..8)) SYNTAX OCTET STRING (SIZE(8))
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The ATU G.994.1 Vendor ID as inserted in the G.994.1 CL/CLR "The ATU G.994.1 Vendor ID as inserted in the G.994.1 CL/CLR
message. It consists of 8 binary octets, including a country message. It consists of 8 binary octets, including a country
code followed by a (regionally allocated) provider code, as code followed by a (regionally allocated) provider code, as
defined in Recommendation T.35." defined in Recommendation T.35."
REFERENCE "ITU-T G.997.1, paragraph 7.4" REFERENCE "ITU-T G.997.1, paragraph 7.4"
::= { adsl2LineInventoryEntry 2 } ::= { adsl2LineInventoryEntry 2 }
adsl2LInvSystemVendorId OBJECT-TYPE adsl2LInvSystemVendorId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..8)) SYNTAX OCTET STRING (SIZE(8))
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The ATU System Vendor ID (identifies the ATU system "The ATU System Vendor ID (identifies the ATU system
integrator) as inserted in the Overhead Messages (both ATUs integrator) as inserted in the Overhead Messages (both ATUs
for G.992.3 and G.992.4) or in the Embedded Operations for G.992.3 and G.992.4) or in the Embedded Operations
Channel (only ATU-R in G.992.1 and G.992.2). It consists of Channel (only ATU-R in G.992.1 and G.992.2). It consists of
8 binary octets, with same format as used for 8 binary octets, with same format as used for
Adsl2InvG994VendorId." Adsl2InvG994VendorId."
REFERENCE "ITU-T G.997.1, paragraph 7.4" REFERENCE "ITU-T G.997.1, paragraph 7.4"
skipping to change at page 66, line 47 skipping to change at page 68, line 27
DESCRIPTION DESCRIPTION
"The ATU serial number (vendor specific information) as "The ATU serial number (vendor specific information) as
inserted in the Overhead Messages (both ATUs for G.992.3 and inserted in the Overhead Messages (both ATUs for G.992.3 and
G.992.4) or in the Embedded Operations Channel (only ATU-R in G.992.4) or in the Embedded Operations Channel (only ATU-R in
G.992.1 and G.992.2). It is vendor specific information. It G.992.1 and G.992.2). It is vendor specific information. It
consists of up to 32 ASCII characters." consists of up to 32 ASCII characters."
REFERENCE "ITU-T G.997.1, paragraph 7.4" REFERENCE "ITU-T G.997.1, paragraph 7.4"
::= { adsl2LineInventoryEntry 5 } ::= { adsl2LineInventoryEntry 5 }
adsl2LInvSelfTestResult OBJECT-TYPE adsl2LInvSelfTestResult OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..4)) SYNTAX Unsigned32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The ATU self-test result, coded as a 32-bit integer. The "The ATU self-test result, coded as a 32-bit value. The
most significant octet of this object is '0' if the self-test most significant octet of the result is '0' if the self-test
passed, and '1' if the self-test failed. The interpretation passed, and '1' if the self-test failed. The interpretation
of the other octets is vendor discretionary." of the other octets is vendor discretionary."
REFERENCE "ITU-T G.997.1, paragraph 7.4" REFERENCE "ITU-T G.997.1, paragraph 7.4"
::= { adsl2LineInventoryEntry 6 } ::= { adsl2LineInventoryEntry 6 }
adsl2LInvTransmissionCapabilities OBJECT-TYPE adsl2LInvTransmissionCapabilities OBJECT-TYPE
SYNTAX Adsl2TransmissionModeType SYNTAX Adsl2TransmissionModeType
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
skipping to change at page 77, line 9 skipping to change at page 78, line 36
DEFVAL { manual } DEFVAL { manual }
::= { adsl2LineConfProfEntry 6 } ::= { adsl2LineConfProfEntry 6 }
adsl2LConfProfRaUsNrmDs OBJECT-TYPE adsl2LConfProfRaUsNrmDs OBJECT-TYPE
SYNTAX Unsigned32(0..310) SYNTAX Unsigned32(0..310)
UNITS "0.1 dB" UNITS "0.1 dB"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The Downstream Up-Shift Noise Margin value, to be used when "The Downstream Up-Shift Noise Margin value, to be used when
Adsl2LineConfRaModeDs is set to DynamicRa. If the downstream Adsl2LineConfRaModeDs is set to dynamicRa. If the downstream
noise margin is above this value and stays above it for noise margin is above this value and stays above it for
more than the time specified by the Adsl2LineConfRaUsTimeDs, more than the time specified by the Adsl2LineConfRaUsTimeDs,
the ATU-R shall attempt to increase the downstream net data the ATU-R shall attempt to increase the downstream net data
rate. The Downstream Up-shift Noise Margin ranges from 0 to rate. The Downstream Up-shift Noise Margin ranges from 0 to
310 units of 0.1 dB (Physical values are 0 to 31 dB)." 310 units of 0.1 dB (Physical values are 0 to 31 dB)."
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.4.3" REFERENCE "ITU-T G.997.1, paragraph 7.3.1.4.3"
DEFVAL { 10 } DEFVAL { 10 }
::= { adsl2LineConfProfEntry 7 } ::= { adsl2LineConfProfEntry 7 }
adsl2LConfProfRaUsNrmUs OBJECT-TYPE adsl2LConfProfRaUsNrmUs OBJECT-TYPE
SYNTAX Unsigned32(0..310) SYNTAX Unsigned32(0..310)
UNITS "0.1 dB" UNITS "0.1 dB"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The Upstream Up-Shift Noise Margin value, to be used when "The Upstream Up-Shift Noise Margin value, to be used when
Adsl2LineConfRaModeUs is set to DynamicRa. If the upstream Adsl2LineConfRaModeUs is set to dynamicRa. If the upstream
noise margin is above this value and stays above it for more noise margin is above this value and stays above it for more
than the time specified by the Adsl2LineConfRaUsTimeUs, the than the time specified by the Adsl2LineConfRaUsTimeUs, the
ATU-C shall attempt to increase the upstream net data rate. ATU-C shall attempt to increase the upstream net data rate.
The Upstream Up-shift Noise Margin ranges from 0 to 310 units The Upstream Up-shift Noise Margin ranges from 0 to 310 units
of 0.1 dB (Physical values are 0 to 31 dB)." of 0.1 dB (Physical values are 0 to 31 dB)."
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.4.4" REFERENCE "ITU-T G.997.1, paragraph 7.3.1.4.4"
DEFVAL { 10 } DEFVAL { 10 }
::= { adsl2LineConfProfEntry 8 } ::= { adsl2LineConfProfEntry 8 }
adsl2LConfProfRaUsTimeDs OBJECT-TYPE adsl2LConfProfRaUsTimeDs OBJECT-TYPE
SYNTAX Unsigned32(0..16383) SYNTAX Unsigned32(0..16383)
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The Downstream Up-Shift Time Interval, to be used when "The Downstream Up-Shift Time Interval, to be used when
Adsl2LineConfRaModeDs is set to DynamicRa. The interval of Adsl2LineConfRaModeDs is set to dynamicRa. The interval of
time that the downstream noise margin should stay above the time that the downstream noise margin should stay above the
Downstream Up-shift Noise Margin before the ATU-R shall Downstream Up-shift Noise Margin before the ATU-R shall
attempt to increase the downstream net data rate. The time attempt to increase the downstream net data rate. The time
interval ranges from 0 to 16383 seconds." interval ranges from 0 to 16383 seconds."
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.4.5" REFERENCE "ITU-T G.997.1, paragraph 7.3.1.4.5"
DEFVAL { 3600 } DEFVAL { 3600 }
::= { adsl2LineConfProfEntry 9 } ::= { adsl2LineConfProfEntry 9 }
adsl2LConfProfRaUsTimeUs OBJECT-TYPE adsl2LConfProfRaUsTimeUs OBJECT-TYPE
SYNTAX Unsigned32(0..16383) SYNTAX Unsigned32(0..16383)
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The Upstream Up-Shift Time Interval, to be used when "The Upstream Up-Shift Time Interval, to be used when
Adsl2LineConfRaModeUs is set to DynamicRa. The interval of Adsl2LineConfRaModeUs is set to dynamicRa. The interval of
time the upstream noise margin should stay above the time the upstream noise margin should stay above the
Upstream Up-shift Noise Margin before the ATU-C shall Upstream Up-shift Noise Margin before the ATU-C shall
attempt to increase the upstream net data rate. The time attempt to increase the upstream net data rate. The time
interval ranges from 0 to 16383 seconds." interval ranges from 0 to 16383 seconds."
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.4.6" REFERENCE "ITU-T G.997.1, paragraph 7.3.1.4.6"
DEFVAL { 3600 } DEFVAL { 3600 }
::= { adsl2LineConfProfEntry 10 } ::= { adsl2LineConfProfEntry 10 }
adsl2LConfProfRaDsNrmsDs OBJECT-TYPE adsl2LConfProfRaDsNrmsDs OBJECT-TYPE
SYNTAX Unsigned32(0..310) SYNTAX Unsigned32(0..310)
UNITS "0.1 dB" UNITS "0.1 dB"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The Downstream Down-Shift Noise Margin value, to be used when "The Downstream Down-Shift Noise Margin value, to be used when
Adsl2LineConfRaModeDs is set to DynamicRa. If the downstream Adsl2LineConfRaModeDs is set to dynamicRa. If the downstream
noise margin is below this value and stays below that for more noise margin is below this value and stays below that for more
than the time specified by the Adsl2LineConfRaDsTimeDs, the than the time specified by the Adsl2LineConfRaDsTimeDs, the
ATU-R shall attempt to decrease the downstream net data rate. ATU-R shall attempt to decrease the downstream net data rate.
The Downstream Down-shift Noise Margin ranges from 0 to 310 The Downstream Down-shift Noise Margin ranges from 0 to 310
units of 0.1 dB (Physical values are 0 to 31 dB)." units of 0.1 dB (Physical values are 0 to 31 dB)."
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.4.7" REFERENCE "ITU-T G.997.1, paragraph 7.3.1.4.7"
DEFVAL { 10 } DEFVAL { 10 }
::= { adsl2LineConfProfEntry 11 } ::= { adsl2LineConfProfEntry 11 }
adsl2LConfProfRaDsNrmsUs OBJECT-TYPE adsl2LConfProfRaDsNrmsUs OBJECT-TYPE
SYNTAX Unsigned32(0..310) SYNTAX Unsigned32(0..310)
UNITS "0.1 dB" UNITS "0.1 dB"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The Upstream Downshift Noise Margin value, to be used when "The Upstream Downshift Noise Margin value, to be used when
Adsl2LineConfRaModeUs is set to DynamicRa. If the upstream Adsl2LineConfRaModeUs is set to dynamicRa. If the upstream
noise margin is below this value and stays below that for more noise margin is below this value and stays below that for more
than the time specified by the Adsl2LineConfRaDsTimeUs, the than the time specified by the Adsl2LineConfRaDsTimeUs, the
ATU-C shall attempt to decrease the upstream net data rate. ATU-C shall attempt to decrease the upstream net data rate.
The Upstream Down-shift Noise Margin ranges from 0 to 310 The Upstream Down-shift Noise Margin ranges from 0 to 310
units of 0.1 dB (Physical values are 0 to 31 dB)." units of 0.1 dB (Physical values are 0 to 31 dB)."
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.4.8" REFERENCE "ITU-T G.997.1, paragraph 7.3.1.4.8"
DEFVAL { 10 } DEFVAL { 10 }
::= { adsl2LineConfProfEntry 12 } ::= { adsl2LineConfProfEntry 12 }
adsl2LConfProfRaDsTimeDs OBJECT-TYPE adsl2LConfProfRaDsTimeDs OBJECT-TYPE
SYNTAX Unsigned32(0..16383) SYNTAX Unsigned32(0..16383)
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The Downstream Downshift Time Interval, to be used when "The Downstream Downshift Time Interval, to be used when
Adsl2LineConfRaModeDs is set to DynamicRa. The interval of Adsl2LineConfRaModeDs is set to dynamicRa. The interval of
time the downstream noise margin should stay below the time the downstream noise margin should stay below the
Downstream Down-shift Noise Margin before the ATU-R shall Downstream Down-shift Noise Margin before the ATU-R shall
attempt to decrease the downstream net data rate. The time attempt to decrease the downstream net data rate. The time
interval ranges from 0 to 16383 seconds." interval ranges from 0 to 16383 seconds."
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.4.9" REFERENCE "ITU-T G.997.1, paragraph 7.3.1.4.9"
DEFVAL { 3600 } DEFVAL { 3600 }
::= { adsl2LineConfProfEntry 13 } ::= { adsl2LineConfProfEntry 13 }
adsl2LConfProfRaDsTimeUs OBJECT-TYPE adsl2LConfProfRaDsTimeUs OBJECT-TYPE
SYNTAX Unsigned32(0..16383) SYNTAX Unsigned32(0..16383)
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The Upstream Down-Shift Time Interval, to be used when "The Upstream Down-Shift Time Interval, to be used when
Adsl2LineConfRaModeUs is set to DynamicRa. The interval of Adsl2LineConfRaModeUs is set to dynamicRa. The interval of
time the upstream noise margin should stay below the Upstream time the upstream noise margin should stay below the Upstream
Down-shift Noise Margin before the ATU-C shall attempt to Down-shift Noise Margin before the ATU-C shall attempt to
decrease the upstream net data rate. The time interval ranges decrease the upstream net data rate. The time interval ranges
from 0 to 16383 seconds." from 0 to 16383 seconds."
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.4.10" REFERENCE "ITU-T G.997.1, paragraph 7.3.1.4.10"
DEFVAL { 3600 } DEFVAL { 3600 }
::= { adsl2LineConfProfEntry 14 } ::= { adsl2LineConfProfEntry 14 }
adsl2LConfProfTargetSnrmDs OBJECT-TYPE adsl2LConfProfTargetSnrmDs OBJECT-TYPE
SYNTAX Unsigned32(0..310) SYNTAX Unsigned32(0..310)
skipping to change at page 80, line 25 skipping to change at page 82, line 4
relative to the BER requirement for each of the upstream relative to the BER requirement for each of the upstream
bearer channels, to successfully complete initialization. bearer channels, to successfully complete initialization.
The target noise margin ranges from 0 to 310 units of 0.1 dB The target noise margin ranges from 0 to 310 units of 0.1 dB
(Physical values are 0 to 31 dB)." (Physical values are 0 to 31 dB)."
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.3.2" REFERENCE "ITU-T G.997.1, paragraph 7.3.1.3.2"
DEFVAL { 60 } DEFVAL { 60 }
::= { adsl2LineConfProfEntry 16 } ::= { adsl2LineConfProfEntry 16 }
adsl2LConfProfMaxSnrmDs OBJECT-TYPE adsl2LConfProfMaxSnrmDs OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32 (0..310 | 2147483647)
UNITS "0.1 dB" UNITS "0.1 dB"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The maximum Noise Margin the ATU-R receiver shall try to "The maximum Noise Margin the ATU-R receiver shall try to
sustain. If the Noise Margin is above this level, the ATU-R sustain. If the Noise Margin is above this level, the ATU-R
shall request that the ATU-C reduce the ATU-C transmit power shall request that the ATU-C reduce the ATU-C transmit power
to get a noise margin below this limit (if this functionality to get a noise margin below this limit (if this functionality
is supported). The maximum noise margin ranges from 0 to 310 is supported). The maximum noise margin ranges from 0 to 310
units of 0.1 dB (Physical values are 0 to 31 dB). A value of units of 0.1 dB (Physical values are 0 to 31 dB). A value of
all 1's means that there is no maximum." 0x7FFFFFFF (2147483647) means that there is no maximum."
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.3.3" REFERENCE "ITU-T G.997.1, paragraph 7.3.1.3.3"
DEFVAL { 310 } DEFVAL { 310 }
::= { adsl2LineConfProfEntry 17 } ::= { adsl2LineConfProfEntry 17 }
adsl2LConfProfMaxSnrmUs OBJECT-TYPE adsl2LConfProfMaxSnrmUs OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32 (0..310 | 2147483647)
UNITS "0.1 dB" UNITS "0.1 dB"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The maximum Noise Margin the ATU-C receiver shall try to "The maximum Noise Margin the ATU-C receiver shall try to
sustain. If the Noise Margin is above this level, the ATU-C sustain. If the Noise Margin is above this level, the ATU-C
shall request that the ATU-R reduce the ATU-R transmit power shall request that the ATU-R reduce the ATU-R transmit power
to get a noise margin below this limit (if this functionality to get a noise margin below this limit (if this functionality
is supported). The maximum noise margin ranges from 0 to 310 is supported). The maximum noise margin ranges from 0 to 310
units of 0.1 dB (Physical values are 0 to 31 dB). A value of units of 0.1 dB (Physical values are 0 to 31 dB). A value of
all 1's means that there is no maximum." 0x7FFFFFFF (2147483647) means that there is no maximum."
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.3.4" REFERENCE "ITU-T G.997.1, paragraph 7.3.1.3.4"
DEFVAL { 310 } DEFVAL { 310 }
::= { adsl2LineConfProfEntry 18 } ::= { adsl2LineConfProfEntry 18 }
adsl2LConfProfMinSnrmDs OBJECT-TYPE adsl2LConfProfMinSnrmDs OBJECT-TYPE
SYNTAX Unsigned32(0..310) SYNTAX Unsigned32(0..310)
UNITS "0.1 dB" UNITS "0.1 dB"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
skipping to change at page 87, line 30 skipping to change at page 89, line 8
DESCRIPTION DESCRIPTION
"The maximum nominal aggregate transmit power in the upstream "The maximum nominal aggregate transmit power in the upstream
direction during initialization and Showtime. It ranges from direction during initialization and Showtime. It ranges from
0 to 255 units of 0.1 dBm (physical values are 0 to 25.5 0 to 255 units of 0.1 dBm (physical values are 0 to 25.5
dBm)." dBm)."
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.2" REFERENCE "ITU-T G.997.1, paragraph 7.3.1.2"
DEFVAL { 255 } DEFVAL { 255 }
::= { adsl2LineConfProfModeSpecEntry 5 } ::= { adsl2LineConfProfModeSpecEntry 5 }
adsl2LConfProfMaxAggRxPwrUs OBJECT-TYPE adsl2LConfProfMaxAggRxPwrUs OBJECT-TYPE
SYNTAX Integer32(-255..2147483647) SYNTAX Integer32(-255..255 | 2147483647)
UNITS "0.1 dBm" UNITS "0.1 dBm"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The maximum upstream aggregate receive power over the relevant "The maximum upstream aggregate receive power over the relevant
set of sub-carriers. The ATU-C should verify that the set of sub-carriers. The ATU-C should verify that the
upstream power cutback is such that this maximum aggregate upstream power cutback is such that this maximum aggregate
receive power value is honored. It ranges from -255 to 255 receive power value is honored. It ranges from -255 to 255
units of 0.1 dBm (physical values are -25.5 to 25.5 dBm). units of 0.1 dBm (physical values are -25.5 to 25.5 dBm).
A value of all ones means that there is no limit." A value of 0x7FFFFFFF (2147483647) means that there is no
limit."
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.2" REFERENCE "ITU-T G.997.1, paragraph 7.3.1.2"
DEFVAL { 255 } DEFVAL { 255 }
::= { adsl2LineConfProfModeSpecEntry 6 } ::= { adsl2LineConfProfModeSpecEntry 6 }
adsl2LConfProfPsdMaskDs OBJECT-TYPE adsl2LConfProfPsdMaskDs OBJECT-TYPE
SYNTAX Adsl2PsdMaskDs SYNTAX Adsl2PsdMaskDs
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The downstream PSD mask applicable at the U-C2 reference "The downstream PSD mask applicable at the U-C2 reference
skipping to change at page 91, line 41 skipping to change at page 93, line 20
adsl2ChConfProfMinResDataRateDs OBJECT-TYPE adsl2ChConfProfMinResDataRateDs OBJECT-TYPE
SYNTAX Unsigned32(0..200000000) SYNTAX Unsigned32(0..200000000)
UNITS "bits/second" UNITS "bits/second"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Minimum Reserved Data Rate on Downstream direction. The "Minimum Reserved Data Rate on Downstream direction. The
minimum reserved net data rate for the bearer channel, coded minimum reserved net data rate for the bearer channel, coded
in bit/s. This parameter is used only if the Rate Adaptation in bit/s. This parameter is used only if the Rate Adaptation
Mode in the direction of the bearer channel (i.e., Mode in the direction of the bearer channel (i.e.,
Adsl2LineConfRaModeDs) is set to DynamicRa." Adsl2LineConfRaModeDs) is set to dynamicRa."
REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1" REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1"
::= { adsl2ChConfProfileEntry 4 } ::= { adsl2ChConfProfileEntry 4 }
adsl2ChConfProfMinResDataRateUs OBJECT-TYPE adsl2ChConfProfMinResDataRateUs OBJECT-TYPE
SYNTAX Unsigned32(0..200000000) SYNTAX Unsigned32(0..200000000)
UNITS "bits/second" UNITS "bits/second"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Minimum Reserved Data Rate on Upstream direction. The minimum "Minimum Reserved Data Rate on Upstream direction. The minimum
reserved net data rate for the bearer channel, coded in reserved net data rate for the bearer channel, coded in
bit/s. This parameter is used only if the Rate Adaptation bit/s. This parameter is used only if the Rate Adaptation
Mode in the direction of the bearer channel (i.e., Mode in the direction of the bearer channel (i.e.,
Adsl2LineConfRaModeUs) is set to DynamicRa." Adsl2LineConfRaModeUs) is set to dynamicRa."
REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1" REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1"
::= { adsl2ChConfProfileEntry 5 } ::= { adsl2ChConfProfileEntry 5 }
adsl2ChConfProfMaxDataRateDs OBJECT-TYPE adsl2ChConfProfMaxDataRateDs OBJECT-TYPE
SYNTAX Unsigned32(0..200000000) SYNTAX Unsigned32(0..200000000)
UNITS "bits/second" UNITS "bits/second"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Maximum Data Rate on Downstream direction. The maximum net "Maximum Data Rate on Downstream direction. The maximum net
skipping to change at page 96, line 51 skipping to change at page 98, line 30
::= { adsl2ChConfProfileEntry 20 } ::= { adsl2ChConfProfileEntry 20 }
------------------------------------------------ ------------------------------------------------
-- adsl2LineAlarmConfTemplateTable -- -- adsl2LineAlarmConfTemplateTable --
------------------------------------------------ ------------------------------------------------
adsl2LineAlarmConfTemplateTable OBJECT-TYPE adsl2LineAlarmConfTemplateTable OBJECT-TYPE
SYNTAX SEQUENCE OF Adsl2LineAlarmConfTemplateEntry SYNTAX SEQUENCE OF Adsl2LineAlarmConfTemplateEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table adsl2LineConfTemplateTable contains ADSL2 line "The table adsl2LineAlarmConfTemplateTable contains
configuration template. ADSL2 line configuration template.
Entries in this table MUST be maintained in a Entries in this table MUST be maintained in a
persistent manner." persistent manner."
::= { adsl2ProfileAlarmConf 1 } ::= { adsl2ProfileAlarmConf 1 }
adsl2LineAlarmConfTemplateEntry OBJECT-TYPE adsl2LineAlarmConfTemplateEntry OBJECT-TYPE
SYNTAX Adsl2LineAlarmConfTemplateEntry SYNTAX Adsl2LineAlarmConfTemplateEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
skipping to change at page 107, line 44 skipping to change at page 109, line 23
------------------------------------------------ ------------------------------------------------
-- PM line current counters -- -- PM line current counters --
------------------------------------------------ ------------------------------------------------
adsl2PMLineCurrTable OBJECT-TYPE adsl2PMLineCurrTable OBJECT-TYPE
SYNTAX SEQUENCE OF Adsl2PMLineCurrEntry SYNTAX SEQUENCE OF Adsl2PMLineCurrEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table adsl2PMLineCurrTable contains current Performance "The table adsl2PMLineCurrTable contains current Performance
Monitoring results of ADSL2 line. The objects in this table Monitoring results of ADSL2 line. "
are NOT persistent."
::= { adsl2PMLine 1 } ::= { adsl2PMLine 1 }
adsl2PMLineCurrEntry OBJECT-TYPE adsl2PMLineCurrEntry OBJECT-TYPE
SYNTAX Adsl2PMLineCurrEntry SYNTAX Adsl2PMLineCurrEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table adsl2PMLineCurrTable contains current Performance "The table adsl2PMLineCurrTable contains current Performance
Monitoring results of ADSL2 line. Monitoring results of ADSL2 line.
The index of this table is an interface index where the The index of this table is an interface index where the
skipping to change at page 112, line 43 skipping to change at page 114, line 21
------------------------------------------------ ------------------------------------------------
-- PM line init current counters -- -- PM line init current counters --
------------------------------------------------ ------------------------------------------------
adsl2PMLineCurrInitTable OBJECT-TYPE adsl2PMLineCurrInitTable OBJECT-TYPE
SYNTAX SEQUENCE OF Adsl2PMLineCurrInitEntry SYNTAX SEQUENCE OF Adsl2PMLineCurrInitEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table adsl2PMLineCurrInitTable contains current "The table adsl2PMLineCurrInitTable contains current
initialization counters of ADSL2 line. The objects in initialization counters of ADSL2 line. "
this table are NOT persistent."
::= { adsl2PMLine 2 } ::= { adsl2PMLine 2 }
adsl2PMLineCurrInitEntry OBJECT-TYPE adsl2PMLineCurrInitEntry OBJECT-TYPE
SYNTAX Adsl2PMLineCurrInitEntry SYNTAX Adsl2PMLineCurrInitEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table adsl2PMLineCurrInitTable contains current "The table adsl2PMLineCurrInitTable contains current
initialization counters of ADSL2 line. initialization counters of ADSL2 line.
The index of this table is an interface index where the The index of this table is an interface index where the
skipping to change at page 115, line 28 skipping to change at page 117, line 4
adsl2PMLCurrInit1DayFailedShortInits OBJECT-TYPE adsl2PMLCurrInit1DayFailedShortInits OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Count of failed short initializations on the line during this "Count of failed short initializations on the line during this
interval." interval."
REFERENCE "ITU-T G.997.1, paragraph 7.2.1" REFERENCE "ITU-T G.997.1, paragraph 7.2.1"
::= { adsl2PMLineCurrInitEntry 10 } ::= { adsl2PMLineCurrInitEntry 10 }
------------------------------------------- -------------------------------------------
-- PM line history 15 Minutes -- -- PM line history 15 Minutes --
------------------------------------------- -------------------------------------------
adsl2PMLineHist15MinTable OBJECT-TYPE adsl2PMLineHist15MinTable OBJECT-TYPE
SYNTAX SEQUENCE OF Adsl2PMLineHist15MinEntry SYNTAX SEQUENCE OF Adsl2PMLineHist15MinEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table adsl2PMLineHist15MinTable contains PM line history "The table adsl2PMLineHist15MinTable contains PM line history
for 15min intervals of ADSL2 line. The objects in this table for 15min intervals of ADSL2 line. "
are NOT persistent."
::= { adsl2PMLine 3 } ::= { adsl2PMLine 3 }
adsl2PMLineHist15MinEntry OBJECT-TYPE adsl2PMLineHist15MinEntry OBJECT-TYPE
SYNTAX Adsl2PMLineHist15MinEntry SYNTAX Adsl2PMLineHist15MinEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table adsl2PMLineHist15MinTable contains PM line history "The table adsl2PMLineHist15MinTable contains PM line history
for 15min intervals of ADSL2 line. for 15min intervals of ADSL2 line.
The index of this table is an interface index where the The index of this table is an interface index where the
skipping to change at page 118, line 37 skipping to change at page 120, line 11
--------------------------------------- ---------------------------------------
-- PM line history 1 Day -- -- PM line history 1 Day --
--------------------------------------- ---------------------------------------
adsl2PMLineHist1DayTable OBJECT-TYPE adsl2PMLineHist1DayTable OBJECT-TYPE
SYNTAX SEQUENCE OF Adsl2PMLineHist1DayEntry SYNTAX SEQUENCE OF Adsl2PMLineHist1DayEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table adsl2PMLineHist1DayTable contains PM line history "The table adsl2PMLineHist1DayTable contains PM line history
for 24 hours intervals of ADSL2 line. The objects in this for 24 hours intervals of ADSL2 line. "
table are NOT persistent."
::= { adsl2PMLine 4 } ::= { adsl2PMLine 4 }
adsl2PMLineHist1DayEntry OBJECT-TYPE adsl2PMLineHist1DayEntry OBJECT-TYPE
SYNTAX Adsl2PMLineHist1DayEntry SYNTAX Adsl2PMLineHist1DayEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table adsl2PMLineHist1DayTable contains PM line history "The table adsl2PMLineHist1DayTable contains PM line history
for 24 hours intervals of ADSL2 line. for 24 hours intervals of ADSL2 line.
The indexes of this table is an interface index where the The indexes of this table is an interface index where the
skipping to change at page 121, line 39 skipping to change at page 123, line 13
-- PM line init history 15 Minutes -- -- PM line init history 15 Minutes --
------------------------------------------- -------------------------------------------
adsl2PMLineInitHist15MinTable OBJECT-TYPE adsl2PMLineInitHist15MinTable OBJECT-TYPE
SYNTAX SEQUENCE OF Adsl2PMLineInitHist15MinEntry SYNTAX SEQUENCE OF Adsl2PMLineInitHist15MinEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table adsl2PMLineInitHist15MinTable contains PM line "The table adsl2PMLineInitHist15MinTable contains PM line
initialization history for 15 minutes intervals of ADSL2 initialization history for 15 minutes intervals of ADSL2
line. The objects in this table are NOT persistent." line. "
::= { adsl2PMLine 5 } ::= { adsl2PMLine 5 }
adsl2PMLineInitHist15MinEntry OBJECT-TYPE adsl2PMLineInitHist15MinEntry OBJECT-TYPE
SYNTAX Adsl2PMLineInitHist15MinEntry SYNTAX Adsl2PMLineInitHist15MinEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table adsl2PMLineInitHist15MinTable contains PM line "The table adsl2PMLineInitHist15MinTable contains PM line
initialization history for 15 minutes intervals of ADSL2 initialization history for 15 minutes intervals of ADSL2
line. line.
skipping to change at page 124, line 5 skipping to change at page 125, line 22
------------------------------------------- -------------------------------------------
-- PM line init history 1 Day -- -- PM line init history 1 Day --
------------------------------------------- -------------------------------------------
adsl2PMLineInitHist1DayTable OBJECT-TYPE adsl2PMLineInitHist1DayTable OBJECT-TYPE
SYNTAX SEQUENCE OF Adsl2PMLineInitHist1DayEntry SYNTAX SEQUENCE OF Adsl2PMLineInitHist1DayEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table adsl2PMLineInitHist1DayTable contains PM line "The table adsl2PMLineInitHist1DayTable contains PM line
initialization history for 24 hours intervals of ADSL2 initialization history for 24 hours intervals of ADSL2
line. The objects in this table are NOT persistent." line. "
::= { adsl2PMLine 6 } ::= { adsl2PMLine 6 }
adsl2PMLineInitHist1DayEntry OBJECT-TYPE adsl2PMLineInitHist1DayEntry OBJECT-TYPE
SYNTAX Adsl2PMLineInitHist1DayEntry SYNTAX Adsl2PMLineInitHist1DayEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table adsl2PMLineInitHist1DayTable contains PM line "The table adsl2PMLineInitHist1DayTable contains PM line
initialization history for 24 hours intervals of ADSL2 initialization history for 24 hours intervals of ADSL2
line. line.
skipping to change at page 126, line 4 skipping to change at page 127, line 21
::= { adsl2PMLineInitHist1DayEntry 6 } ::= { adsl2PMLineInitHist1DayEntry 6 }
adsl2PMLHistinit1DValidInterval OBJECT-TYPE adsl2PMLHistinit1DValidInterval OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This variable indicates if the data for this interval is "This variable indicates if the data for this interval is
valid." valid."
::= { adsl2PMLineInitHist1DayEntry 7 } ::= { adsl2PMLineInitHist1DayEntry 7 }
--------------------------------------------------- ---------------------------------------------------
-- PM channel current counters -- -- PM channel current counters --
--------------------------------------------------- ---------------------------------------------------
adsl2PMChCurrTable OBJECT-TYPE adsl2PMChCurrTable OBJECT-TYPE
SYNTAX SEQUENCE OF Adsl2PMChCurrEntry SYNTAX SEQUENCE OF Adsl2PMChCurrEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table adsl2PMChCurrTable contains current Performance "The table adsl2PMChCurrTable contains current Performance
Monitoring results of ADSL2 channel. The objects in this Monitoring results of ADSL2 channel. "
table are NOT persistent."
::= { adsl2PMChannel 1 } ::= { adsl2PMChannel 1 }
adsl2PMChCurrEntry OBJECT-TYPE adsl2PMChCurrEntry OBJECT-TYPE
SYNTAX Adsl2PMChCurrEntry SYNTAX Adsl2PMChCurrEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table adsl2PMChCurrTable contains current Performance "The table adsl2PMChCurrTable contains current Performance
Monitoring results of ADSL2 channel. Monitoring results of ADSL2 channel.
The indexes of this table is an interface index where The indexes of this table is an interface index where
skipping to change at page 129, line 23 skipping to change at page 130, line 43
------------------------------------------- -------------------------------------------
-- PM channel history 15 Minutes -- -- PM channel history 15 Minutes --
------------------------------------------- -------------------------------------------
adsl2PMChHist15MinTable OBJECT-TYPE adsl2PMChHist15MinTable OBJECT-TYPE
SYNTAX SEQUENCE OF Adsl2PMChHist15MinEntry SYNTAX SEQUENCE OF Adsl2PMChHist15MinEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table adsl2PMChCurrTable contains current Performance "The table adsl2PMChCurrTable contains current Performance
Monitoring results of ADSL2 channel. The objects in this Monitoring results of ADSL2 channel. "
table are NOT persistent."
::= { adsl2PMChannel 2 } ::= { adsl2PMChannel 2 }
adsl2PMChHist15MinEntry OBJECT-TYPE adsl2PMChHist15MinEntry OBJECT-TYPE
SYNTAX Adsl2PMChHist15MinEntry SYNTAX Adsl2PMChHist15MinEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table adsl2PMChCurrTable contains current Performance "The table adsl2PMChCurrTable contains current Performance
Monitoring results of ADSL2 channel. Monitoring results of ADSL2 channel.
The indexes of this table is an interface index where The indexes of this table is an interface index where
skipping to change at page 131, line 30 skipping to change at page 132, line 49
------------------------------------------ ------------------------------------------
-- PM channel history 1 Day -- -- PM channel history 1 Day --
------------------------------------------ ------------------------------------------
adsl2PMChHist1DTable OBJECT-TYPE adsl2PMChHist1DTable OBJECT-TYPE
SYNTAX SEQUENCE OF Adsl2PMChHist1DEntry SYNTAX SEQUENCE OF Adsl2PMChHist1DEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table adsl2PMChHist1DayTable contains PM channel history "The table adsl2PMChHist1DayTable contains PM channel history
for 1 day intervals of ADSL2. The objects in this table are for 1 day intervals of ADSL2. "
NOT persistent."
::= { adsl2PMChannel 3 } ::= { adsl2PMChannel 3 }
adsl2PMChHist1DEntry OBJECT-TYPE adsl2PMChHist1DEntry OBJECT-TYPE
SYNTAX Adsl2PMChHist1DEntry SYNTAX Adsl2PMChHist1DEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table adsl2PMChHist1DayTable contains PM channel history "The table adsl2PMChHist1DayTable contains PM channel history
for 1 day intervals of ADSL2. for 1 day intervals of ADSL2.
The indexes of this table is an interface index where The indexes of this table is an interface index where
 End of changes. 118 change blocks. 
191 lines changed or deleted 262 lines changed or added

This html diff was produced by rfcdiff 1.29, available from http://www.levkowetz.com/ietf/tools/rfcdiff/