draft-ietf-adslmib-adsl2-06.txt   draft-ietf-adslmib-adsl2-07.txt 
Network Working Group M. Morgenstern Network Working Group M. Morgenstern
Internet-Draft M. Dodge Internet-Draft M. Dodge
Expires: August 27, 2006 ECI Telecom Ltd. Expires: October 27, 2006 ECI Telecom Ltd.
S. Baillie S. Baillie
U. Bonollo U. Bonollo
NEC Australia NEC Australia
February 23, 2006 April 25, 2006
Definitions of Managed Objects for Asymmetric Digital Subscriber Line 2 Definitions of Managed Objects for Asymmetric Digital Subscriber Line 2
(ADSL2) (ADSL2)
draft-ietf-adslmib-adsl2-06.txt draft-ietf-adslmib-adsl2-07.txt
Status of this Memo Status of this Memo
By submitting this Internet-Draft, each author represents that any By submitting this Internet-Draft, each author represents that any
applicable patent or other IPR claims of which he or she is aware applicable patent or other IPR claims of which he or she is aware
have been or will be disclosed, and any of which he or she becomes have been or will be disclosed, and any of which he or she becomes
aware will be disclosed, in accordance with Section 6 of BCP 79. aware will be disclosed, in accordance with Section 6 of BCP 79.
Internet-Drafts are working documents of the Internet Engineering Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF), its areas, and its working groups. Note that Task Force (IETF), its areas, and its working groups. Note that
skipping to change at page 1, line 38 skipping to change at page 1, line 38
and may be updated, replaced, or obsoleted by other documents at any and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress." material or to cite them other than as "work in progress."
The list of current Internet-Drafts can be accessed at The list of current Internet-Drafts can be accessed at
http://www.ietf.org/ietf/1id-abstracts.txt. http://www.ietf.org/ietf/1id-abstracts.txt.
The list of Internet-Draft Shadow Directories can be accessed at The list of Internet-Draft Shadow Directories can be accessed at
http://www.ietf.org/shadow.html. http://www.ietf.org/shadow.html.
This Internet-Draft will expire on August 27, 2006. This Internet-Draft will expire on October 27, 2006.
Copyright Notice Copyright Notice
Copyright (C) The Internet Society (2006). Copyright (C) The Internet Society (2006).
Abstract Abstract
This document defines a Management Information Base (MIB) module for This document defines a Management Information Base (MIB) module for
use with network management protocols in the Internet community. In use with network management protocols in the Internet community. In
particular, it describes objects used for managing parameters of the particular, it describes objects used for managing parameters of the
skipping to change at page 2, line 21 skipping to change at page 2, line 21
2.2. IANA Considerations . . . . . . . . . . . . . . . . . . . 6 2.2. IANA Considerations . . . . . . . . . . . . . . . . . . . 6
2.3. Conventions Used in the MIB Module . . . . . . . . . . . 6 2.3. Conventions Used in the MIB Module . . . . . . . . . . . 6
2.4. Structure . . . . . . . . . . . . . . . . . . . . . . . . 13 2.4. Structure . . . . . . . . . . . . . . . . . . . . . . . . 13
2.5. Persistence . . . . . . . . . . . . . . . . . . . . . . . 15 2.5. Persistence . . . . . . . . . . . . . . . . . . . . . . . 15
2.6. Line Topology . . . . . . . . . . . . . . . . . . . . . . 18 2.6. Line Topology . . . . . . . . . . . . . . . . . . . . . . 18
2.7. Counters, Interval Buckets, and Thresholds . . . . . . . 18 2.7. Counters, Interval Buckets, and Thresholds . . . . . . . 18
2.8. Profiles . . . . . . . . . . . . . . . . . . . . . . . . 20 2.8. Profiles . . . . . . . . . . . . . . . . . . . . . . . . 20
2.9. Notifications . . . . . . . . . . . . . . . . . . . . . . 24 2.9. Notifications . . . . . . . . . . . . . . . . . . . . . . 24
3. Definitions . . . . . . . . . . . . . . . . . . . . . . . . . 25 3. Definitions . . . . . . . . . . . . . . . . . . . . . . . . . 25
4. Implementation Analysis . . . . . . . . . . . . . . . . . . . 153 4. Implementation Analysis . . . . . . . . . . . . . . . . . . . 153
5. Security Considerations . . . . . . . . . . . . . . . . . . . 153 5. Security Considerations . . . . . . . . . . . . . . . . . . . 154
6. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . 160 6. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . 160
7. References . . . . . . . . . . . . . . . . . . . . . . . . . 161 7. References . . . . . . . . . . . . . . . . . . . . . . . . . 161
7.1. Normative References . . . . . . . . . . . . . . . . . . 161 7.1. Normative References . . . . . . . . . . . . . . . . . . 161
7.2. Informative References . . . . . . . . . . . . . . . . . 162 7.2. Informative References . . . . . . . . . . . . . . . . . 162
Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 164 Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 164
Intellectual Property and Copyright Statements . . . . . . . . . 165 Intellectual Property and Copyright Statements . . . . . . . . . 165
1. The Internet-Standard Management Framework 1. The Internet-Standard Management Framework
For a detailed overview of the documents that describe the current For a detailed overview of the documents that describe the current
skipping to change at page 23, line 6 skipping to change at page 23, line 6
template. template.
One or more lines may be configured to share parameters of a single One or more lines may be configured to share parameters of a single
Alarm configuration template (e.g., adsl2LAlarmConfTempTemplateName = Alarm configuration template (e.g., adsl2LAlarmConfTempTemplateName =
'silver') by setting its adsl2LCnfgAlarmTemplate objects to the value 'silver') by setting its adsl2LCnfgAlarmTemplate objects to the value
of this template. of this template.
Before a template can be deleted or taken out of service it MUST be Before a template can be deleted or taken out of service it MUST be
first unreferenced from all associated lines. Implementations MAY first unreferenced from all associated lines. Implementations MAY
also reject template modification while it is associated with any also reject template modification while it is associated with any
line. Implementations MUST reject template modification while its line.
row status is set to 'active'.
Before a profile can be deleted or taken out of service it MUST be Before a profile can be deleted or taken out of service it MUST be
first unreferenced from all associated templates. Implementations first unreferenced from all associated templates. Implementations
MAY also reject profile modification while it is referenced by any MAY also reject profile modification while it is referenced by any
template. Implementations MUST reject profile modification while its template.
row status is set to 'active'.
Implementations MUST provide a default profile whose name is 'DEFVAL' Implementations MUST provide a default profile whose name is 'DEFVAL'
for each profile and template type. The values of the associated for each profile and template type. The values of the associated
parameters will be vendor-specific unless otherwise indicated in this parameters will be vendor-specific unless otherwise indicated in this
document. Before a line's templates have been set, these templates document. Before a line's templates have been set, these templates
will be automatically used by setting adsl2LCnfgLineTemplate and will be automatically used by setting adsl2LCnfgLineTemplate and
adsl2LCnfgAlarmTemplate to 'DEFVAL' where appropriate. This default adsl2LCnfgAlarmTemplate to 'DEFVAL' where appropriate. This default
profile name, 'DEFVAL', is considered reserved in the context of profile name, 'DEFVAL', is considered reserved in the context of
profiles and templates defined in this MIB module. profiles and templates defined in this MIB module.
skipping to change at page 25, line 36 skipping to change at page 25, line 34
IMPORTS IMPORTS
MODULE-IDENTITY, MODULE-IDENTITY,
transmission transmission
FROM SNMPv2-SMI FROM SNMPv2-SMI
TEXTUAL-CONVENTION TEXTUAL-CONVENTION
FROM SNMPv2-TC; FROM SNMPv2-TC;
adsl2TCMIB MODULE-IDENTITY adsl2TCMIB MODULE-IDENTITY
LAST-UPDATED "200602230000Z" -- February 23, 2006 LAST-UPDATED "200604250000Z" - April 25, 2006
ORGANIZATION "ADSLMIB Working Group" ORGANIZATION "ADSLMIB Working Group"
CONTACT-INFO "WG-email: adslmib@ietf.org CONTACT-INFO "WG-email: adslmib@ietf.org
Info: https://www1.ietf.org/mailman/listinfo/adslmib Info: https://www1.ietf.org/mailman/listinfo/adslmib
Chair: Mike Sneed Chair: Mike Sneed
Sand Channel Systems Sand Channel Systems
Postal: P.O. Box 37324 Postal: P.O. Box 37324
Raleigh NC 27627-732 Raleigh NC 27627-732
Email: sneedmike@hotmail.com Email: sneedmike@hotmail.com
Phone: +1 206 600 7022 Phone: +1 206 600 7022
skipping to change at page 26, line 47 skipping to change at page 26, line 45
DESCRIPTION DESCRIPTION
"This MIB Module provides Textual Conventions to be "This MIB Module provides Textual Conventions to be
used by the ADSL2-LINE-MIB module for the purpose of used by the ADSL2-LINE-MIB module for the purpose of
managing ADSL, ADSL2 and ADSL2+ lines. managing ADSL, ADSL2 and ADSL2+ lines.
Copyright (C) The Internet Society (2006). This version of Copyright (C) The Internet Society (2006). This version of
this MIB module is part of RFC XXXX: see the RFC itself for this MIB module is part of RFC XXXX: see the RFC itself for
full legal notices." full legal notices."
-- RFC Ed.: replace XXXX with assigned number & remove this note -- RFC Ed.: replace XXXX with assigned number & remove this note
REVISION "200602230000Z" -- February 23, 2006 REVISION "200604250000Z" -- April 25, 2006
DESCRIPTION "Initial version, published as RFC XXXX." DESCRIPTION "Initial version, published as RFC XXXX."
-- RFC Ed.: replace XX with assigned number & remove this note -- RFC Ed.: replace XX with assigned number & remove this note
::= { transmission xxx 2} -- adsl2MIB 2 ::= { transmission xxx 2} -- adsl2MIB 2
-- IANA, the xxx here must be the same as the one assigned -- IANA, the xxx here must be the same as the one assigned
-- to the adsl2MIB below. -- to the adsl2MIB below.
-- RFC Ed.: Please fill in xxx once assigned by IANA. -- RFC Ed.: Please fill in xxx once assigned by IANA.
------------------------------------------------ ------------------------------------------------
-- Textual Conventions -- -- Textual Conventions --
------------------------------------------------ ------------------------------------------------
skipping to change at page 30, line 41 skipping to change at page 30, line 38
Adsl2InitResult ::= TEXTUAL-CONVENTION Adsl2InitResult ::= TEXTUAL-CONVENTION
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Specifies the result of full initialization attempt; the "Specifies the result of full initialization attempt; the
six possible result values are: six possible result values are:
noFail (0) - Successful initialization noFail (0) - Successful initialization
configError (1) - Configuration failure configError (1) - Configuration failure
configNotFeasible (2) - Configuration details not supported configNotFeasible (2) - Configuration details not supported
commFail (3) - Communication failure commFail (3) - Communication failure
noPeerAtu (4) - Peer ATU not detected noPeerAtu (4) - Peer ATU not detected
otherCause (5) - Other initialization failure reason" otherCause (5) - Other initialization failure reason
The values used are as defined in ITU-T G.997.1,
paragraph 7.5.1.3"
SYNTAX INTEGER { SYNTAX INTEGER {
noFail(0), noFail(0),
configError(1), configError(1),
configNotFeasible(2), configNotFeasible(2),
commFail(3), commFail(3),
noPeerAtu(4), noPeerAtu(4),
otherCause(5) otherCause(5)
} }
Adsl2OperationModes ::= TEXTUAL-CONVENTION Adsl2OperationModes ::= TEXTUAL-CONVENTION
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The ADSL2 management model specified includes an ADSL Mode "The ADSL2 management model specified includes an ADSL Mode
attribute which identifies an instance of ADSL Mode-Specific attribute which identifies an instance of ADSL Mode-Specific
PSD Configuration object in the ADSL Line Profile. The PSD Configuration object in the ADSL Line Profile. The
following classes of ADSL operating mode are defined. " following classes of ADSL operating mode are defined. "
SYNTAX INTEGER { SYNTAX INTEGER {
defMode (1), defMode (1),
adsl (2), adsl (2),
skipping to change at page 31, line 50 skipping to change at page 31, line 51
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Attributes with this syntax are configuration parameters "Attributes with this syntax are configuration parameters
that reference the desired power management state for the that reference the desired power management state for the
ADSL/ADSL2 or ADSL2+ link: ADSL/ADSL2 or ADSL2+ link:
l3toL0 (0) - Perform a transition from L3 to L0 l3toL0 (0) - Perform a transition from L3 to L0
(Full power management state) (Full power management state)
l0toL2 (2) - Perform a transition from L0 to L2 l0toL2 (2) - Perform a transition from L0 to L2
(Low power management state) (Low power management state)
l0orL2toL3 (3) - Perform a transition into L3 (Idle l0orL2toL3 (3) - Perform a transition into L3 (Idle
power management state)" power management state)
The values used are as defined in ITU-T G.997.1,
paragraph 7.3.1.1.3"
SYNTAX INTEGER { SYNTAX INTEGER {
l3toL0 (0), l3toL0 (0),
l0toL2 (2), l0toL2 (2),
l0orL2toL3 (3) l0orL2toL3 (3)
} }
Adsl2LConfProfPmMode ::= TEXTUAL-CONVENTION Adsl2LConfProfPmMode ::= TEXTUAL-CONVENTION
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Attributes with this syntax are configuration parameters "Attributes with this syntax are configuration parameters
skipping to change at page 32, line 36 skipping to change at page 32, line 39
allowTransitionsToLowPower(1) allowTransitionsToLowPower(1)
} }
Adsl2LineLdsf ::= TEXTUAL-CONVENTION Adsl2LineLdsf ::= TEXTUAL-CONVENTION
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Attributes with this syntax are configuration parameters "Attributes with this syntax are configuration parameters
that control the Loop Diagnostic mode for the ADSL/ADSL2 or that control the Loop Diagnostic mode for the ADSL/ADSL2 or
ADSL2+ link. The possible values are: ADSL2+ link. The possible values are:
inhibit (0) - Inhibit Loop Diagnostic mode inhibit (0) - Inhibit Loop Diagnostic mode
force (1) - Force/Initiate Loop Diagnostic mode" force (1) - Force/Initiate Loop Diagnostic mode
The values used are as defined in ITU-T G.997.1,
paragraph 7.3.1.1.8"
SYNTAX INTEGER { SYNTAX INTEGER {
inhibit(0), inhibit(0),
force(1) force(1)
} }
Adsl2LdsfResult ::= TEXTUAL-CONVENTION Adsl2LdsfResult ::= TEXTUAL-CONVENTION
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Possible failure reasons associated with performing "Possible failure reasons associated with performing
skipping to change at page 40, line 25 skipping to change at page 40, line 31
Adsl2ChAtmStatus, Adsl2ChAtmStatus,
Adsl2ChPtmStatus Adsl2ChPtmStatus
FROM ADSL2-LINE-TC-MIB -- [This document] FROM ADSL2-LINE-TC-MIB -- [This document]
MODULE-COMPLIANCE, MODULE-COMPLIANCE,
OBJECT-GROUP, OBJECT-GROUP,
NOTIFICATION-GROUP NOTIFICATION-GROUP
FROM SNMPv2-CONF; FROM SNMPv2-CONF;
adsl2MIB MODULE-IDENTITY adsl2MIB MODULE-IDENTITY
LAST-UPDATED "200602230000Z" -- February 23, 2006 LAST-UPDATED "200604250000Z" - April 25, 2006
ORGANIZATION "ADSLMIB Working Group" ORGANIZATION "ADSLMIB Working Group"
CONTACT-INFO "WG-email: adslmib@ietf.org CONTACT-INFO "WG-email: adslmib@ietf.org
Info: https://www1.ietf.org/mailman/listinfo/adslmib Info: https://www1.ietf.org/mailman/listinfo/adslmib
Chair: Mike Sneed Chair: Mike Sneed
Sand Channel Systems Sand Channel Systems
Postal: P.O. Box 37324 Postal: P.O. Box 37324
Raleigh NC 27627-732 Raleigh NC 27627-732
Email: sneedmike@hotmail.com Email: sneedmike@hotmail.com
Phone: +1 206 600 7022 Phone: +1 206 600 7022
skipping to change at page 42, line 17 skipping to change at page 42, line 22
The MIB module is located in the MIB tree under MIB 2 The MIB module is located in the MIB tree under MIB 2
transmission, as discussed in the MIB-2 Integration (RFC 2863 transmission, as discussed in the MIB-2 Integration (RFC 2863
[RFC2863]) section of this document. [RFC2863]) section of this document.
Copyright (C) The Internet Society (2006). This version of Copyright (C) The Internet Society (2006). This version of
this MIB module is part of RFC XXXX: see the RFC itself for this MIB module is part of RFC XXXX: see the RFC itself for
full legal notices." full legal notices."
-- RFC Ed.: replace XXXX with assigned number & remove this note -- RFC Ed.: replace XXXX with assigned number & remove this note
REVISION "200602230000Z" -- February 23, 2006 REVISION "200604250000Z" -- April 25, 2006
DESCRIPTION "Initial version, published as RFC XXXX." DESCRIPTION "Initial version, published as RFC XXXX."
-- RFC Ed.: replace XXXX with assigned number & remove this note -- RFC Ed.: replace XXXX with assigned number & remove this note
::= { transmission xxx } ::= { transmission xxx }
-- IANA, we suggest to put it under { transmission 230 } because -- IANA, we suggest to put it under { transmission 230 } because
-- this is the first available number. -- this is the first available number.
-- RFC Ed.: Please fill in xxx once assigned by IANA. -- RFC Ed.: Please fill in xxx once assigned by IANA.
adsl2 OBJECT IDENTIFIER ::= { adsl2MIB 1 } adsl2 OBJECT IDENTIFIER ::= { adsl2MIB 1 }
------------------------------------------------ ------------------------------------------------
adsl2Line OBJECT IDENTIFIER ::= { adsl2 1 } adsl2Line OBJECT IDENTIFIER ::= { adsl2 1 }
skipping to change at page 55, line 48 skipping to change at page 55, line 50
------------------------------------------------ ------------------------------------------------
-- adsl2SCStatusTable -- -- adsl2SCStatusTable --
------------------------------------------------ ------------------------------------------------
adsl2SCStatusTable OBJECT-TYPE adsl2SCStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF Adsl2SCStatusEntry SYNTAX SEQUENCE OF Adsl2SCStatusEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table adsl2SCStatusTable contains status parameters "The table adsl2SCStatusTable contains status parameters
of ADSL2 sub-carriers. The following points apply to this of ADSL2 sub-carriers. This following points apply to this
table : table :
1. The main purpose of this table is to hold the results 1. The main purpose of this table is to hold the results
of a DELT test. of a DELT test.
2. This table also holds parameters obtained at line 2. This table also holds parameters obtained at line
initialization time. initialisation time.
3. The rows in this table are volatile. That is they are 3. The rows in this table are volatile, that is they are
lost if the SNMP agent is rebooted. lost if the SNMP agent is rebooted.
4. Due to the large OCTET STRING attributes in this table, 4. Due to the large OCTET STRING attributes in this table,
the worst case memory requirements for this table are the worst case memory requirements for this table are
very high. The manager may use the row status attribute very high. The manager may use the row status attribute
of this table to delete rows in order to reclaim memory. of this table to delete rows in order to reclaim memory.
5. The manager may create rows in this table. The SNMP 5. The manager may create rows in this table. The SNMP
agent may create rows in this table. Only the manager agent may create rows in this table. Only the manager
may delete rows in this table. may delete rows in this table.
6. The maximum number of rows allowable in this table is 6. The maximum number of rows allowable in this table is
indicated by the scalar attribute indicated by the scalar attribute
adsl2ScalarSCMaxInterfaces. adsl2ScalarSCMaxInterfaces.
The number of rows available in this table is indicated The number of rows available in this table is indicated
by the scalar attribute adsl2ScalarSCAvailInterfaces. by the scalar attribute adsl2ScalarSCAvailInterfaces.
7. The SNMP agent is permitted to create rows in this table 7. The SNMP agent is permitted to create rows in this table
when a DELT test completes successfully or when line when a DELT test completes successfully or when line
initialization occurs. It is not mandatory for the SNMP initialisation occurs. It is not mandatory for the SNMP
agent to create rows in this table, hence it may be agent to create rows in this table, hence it may be
necessary for the manager to create rows in this table necessary for the manager to create rows in this table
before any results can be stored. before any results can be stored.
8. If the manager attempts to create a row in this table 8. If the manager attempts to create a row in this table
and there are no more rows available, the creation and there are no more rows available, the creation
attempt will fail and the response to the SNMP SET PDU attempt will fail and the response to the SNMP SET PDU
will contain the error noCreation(11). will contain the error noCreation(11).
9. If the SNMP agent attempts to create a row in this table 9. If the SNMP agent attempts to create a row in this table
and there are no more rows available, the creation and there are no more rows available, the creation
attempt will fail and the attribute attempt will fail and the attribute
skipping to change at page 57, line 4 skipping to change at page 57, line 6
Step 3. : The row in the adsl2SCStatusTable where the Step 3. : The row in the adsl2SCStatusTable where the
: results will be stored does not yet exist so : results will be stored does not yet exist so
: the SNMP agent attempts to create the row. : the SNMP agent attempts to create the row.
Step 4. : Due to a low memory condition, a row in the Step 4. : Due to a low memory condition, a row in the
: adsl2SCStatusTable table cannot be created at : adsl2SCStatusTable table cannot be created at
: this time. : this time.
Step 5. : The reason for the failure, tableFull(10), is Step 5. : The reason for the failure, tableFull(10), is
: indicated in the adsl2LineCmndConfLdsfFailReason : indicated in the adsl2LineCmndConfLdsfFailReason
: attribute. : attribute.
11. Another example of use of this table is as follows: 11. Another example of use of this table is as follows:
Step 1. : The DELT test is started by setting the Step 1. : The DELT test is started by setting the
: adsl2LineCmndConfLdsf from inhibit to force. : adsl2LineCmndConfLdsf from inhibit to force.
Step 2. : The DELT test completes and valid data is Step 2. : The DELT test completes and valid data is
: available. : available.
Step 3. : The row in the adsl2SCStatusTable where the Step 3. : The row in the adsl2SCStatusTable where the
: results will be stored does not yet exist so : results will be stored does not yet exist so
: the SNMP agent attempts to create the row. : the SNMP agent attempts to create the row.
Step 4. : The row creation is successful. Step 4. : The row creation is successfully.
Step 5. : The value of the attribute Step 5. : The value of the attribute
: adsl2LineCmndConfLdsfFailReasonreason is set : adsl2LineCmndConfLdsfFailReasonreason is set
: to success(2). : to success(2).
12. Another example of use of this table is as follows: 12. Another example of use of this table is as follows:
Step 1. : The manager creates a row in adsl2SCStatusTable Step 1. : The manager creates a row in adsl2SCStatusTable
: for a particular ADSL2 line. : for a particular ADSL2 line.
Step 2. : The DELT test is started on the above mentioned Step 2. : The DELT test is started on the above mentioned
: line by setting the adsl2LineCmndConfLdsf from : line by setting the adsl2LineCmndConfLdsf from
: inhibit to force. : inhibit to force.
Step 3. : The DELT test completes and valid data is Step 3. : The DELT test completes and valid data is
skipping to change at page 75, line 14 skipping to change at page 75, line 14
adsl2LConfTempRowStatus OBJECT-TYPE adsl2LConfTempRowStatus OBJECT-TYPE
SYNTAX RowStatus SYNTAX RowStatus
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object is used to create a new row or to modify or "This object is used to create a new row or to modify or
delete an existing row in this table. delete an existing row in this table.
A template is activated by setting this object to 'active'. A template is activated by setting this object to 'active'.
When 'active' is set, the system will validate the template. When 'active' is set, the system will validate the template.
Template modification is prohibited while this object is set
to 'active'.
Before a template can be deleted or taken out of service Before a template can be deleted or taken out of service
(by setting this object to 'destroy' or 'notInService'), (by setting this object to 'destroy' or 'notInService'),
it must be first unreferenced from all associated it must be first unreferenced from all associated
lines." lines."
::= { adsl2LineConfTemplateEntry 15 } ::= { adsl2LineConfTemplateEntry 15 }
------------------------------------------ ------------------------------------------
-- adsl2LineConfProfTable -- -- adsl2LineConfProfTable --
------------------------------------------ ------------------------------------------
skipping to change at page 86, line 7 skipping to change at page 86, line 7
adsl2LConfProfRowStatus OBJECT-TYPE adsl2LConfProfRowStatus OBJECT-TYPE
SYNTAX RowStatus SYNTAX RowStatus
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object is used to create a new row or to modify or "This object is used to create a new row or to modify or
delete an existing row in this table. delete an existing row in this table.
A profile is activated by setting this object to 'active'. A profile is activated by setting this object to 'active'.
When 'active' is set, the system will validate the profile. When 'active' is set, the system will validate the profile.
Profile modification is prohibited while this object is set
to 'active'.
Before a profile can be deleted or taken out of service Before a profile can be deleted or taken out of service
(by setting this object to 'destroy' or 'notInService'), (by setting this object to 'destroy' or 'notInService'),
it must be first unreferenced from all associated it must be first unreferenced from all associated
templates." templates."
::= { adsl2LineConfProfEntry 29 } ::= { adsl2LineConfProfEntry 29 }
------------------------------------------ ------------------------------------------
-- adsl2LineConfProfModeSpecTable -- -- adsl2LineConfProfModeSpecTable --
------------------------------------------ ------------------------------------------
skipping to change at page 91, line 14 skipping to change at page 91, line 11
SYNTAX RowStatus SYNTAX RowStatus
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object is used to create a new row or to modify or "This object is used to create a new row or to modify or
delete an existing row in this table. delete an existing row in this table.
A profile is activated by setting this object to 'active'. A profile is activated by setting this object to 'active'.
When 'active' is set, the system will validate the profile. When 'active' is set, the system will validate the profile.
Profile modification is prohibited while this object is set
to 'active'.
Before a profile can be deleted or taken out of service Before a profile can be deleted or taken out of service
(by setting this object to 'destroy' or 'notInService'), (by setting this object to 'destroy' or 'notInService'),
it must be first unreferenced from all associated it must be first unreferenced from all associated
templates." templates."
::= { adsl2LineConfProfModeSpecEntry 10 } ::= { adsl2LineConfProfModeSpecEntry 10 }
------------------------------------------------ ------------------------------------------------
-- adsl2ChConfProfileTable -- -- adsl2ChConfProfileTable --
skipping to change at page 95, line 36 skipping to change at page 95, line 29
adsl2ChConfProfMinProtectionUs OBJECT-TYPE adsl2ChConfProfMinProtectionUs OBJECT-TYPE
SYNTAX Adsl2SymbolProtection SYNTAX Adsl2SymbolProtection
UNITS "symbols" UNITS "symbols"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Minimum Impulse Noise Protection on Upstream direction. The "Minimum Impulse Noise Protection on Upstream direction. The
minimum impulse noise protection for the bearer channel, minimum impulse noise protection for the bearer channel,
expressed in symbols. The parameter can take the following expressed in symbols. The parameter can take the following
values: values: noProtection (i.e., INP not required), halfSymbol
noProtection (1), (i.e., INP length is 1/2 symbol) and 1-16 symbols in steps
halfSymbol (2), of 1 symbol."
singleSymbol (3),
twoSymbols (4),
fourSymbols (5),
eightSymbols (6),
sixteenSymbols (7)."
REFERENCE "ITU-T G.997.1, paragraph 7.3.2.3" REFERENCE "ITU-T G.997.1, paragraph 7.3.2.3"
DEFVAL { noProtection } DEFVAL { noProtection }
::= { adsl2ChConfProfileEntry 12 } ::= { adsl2ChConfProfileEntry 12 }
adsl2ChConfProfMaxBerDs OBJECT-TYPE adsl2ChConfProfMaxBerDs OBJECT-TYPE
SYNTAX Adsl2MaxBer SYNTAX Adsl2MaxBer
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Maximum Bit Error Ratio on Downstream direction. The maximum "Maximum Bit Error Ratio on Downstream direction. The maximum
skipping to change at page 98, line 13 skipping to change at page 97, line 49
adsl2ChConfProfRowStatus OBJECT-TYPE adsl2ChConfProfRowStatus OBJECT-TYPE
SYNTAX RowStatus SYNTAX RowStatus
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object is used to create a new row or to modify or "This object is used to create a new row or to modify or
delete an existing row in this table. delete an existing row in this table.
A profile is activated by setting this object to 'active'. A profile is activated by setting this object to 'active'.
When 'active' is set, the system will validate the profile. When 'active' is set, the system will validate the profile.
Profile modification is prohibited while this object is set
to 'active'.
Before a profile can be deleted or taken out of service Before a profile can be deleted or taken out of service
(by setting this object to 'destroy' or 'notInService'), (by setting this object to 'destroy' or 'notInService'),
it must be first unreferenced from all associated it must be first unreferenced from all associated
templates." templates."
::= { adsl2ChConfProfileEntry 20 } ::= { adsl2ChConfProfileEntry 20 }
------------------------------------------------ ------------------------------------------------
-- adsl2LineAlarmConfTemplateTable -- -- adsl2LineAlarmConfTemplateTable --
------------------------------------------------ ------------------------------------------------
skipping to change at page 101, line 16 skipping to change at page 100, line 50
adsl2LAlarmConfTempRowStatus OBJECT-TYPE adsl2LAlarmConfTempRowStatus OBJECT-TYPE
SYNTAX RowStatus SYNTAX RowStatus
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object is used to create a new row or to modify or "This object is used to create a new row or to modify or
delete an existing row in this table. delete an existing row in this table.
A template is activated by setting this object to 'active'. A template is activated by setting this object to 'active'.
When 'active' is set, the system will validate the template. When 'active' is set, the system will validate the template.
Template modification is prohibited while this object is set
to 'active'.
Before a template can be deleted or taken out of service Before a template can be deleted or taken out of service
(by setting this object to 'destroy' or 'notInService'), (by setting this object to 'destroy' or 'notInService'),
it must be first unreferenced from all associated it must be first unreferenced from all associated
lines." lines."
::= { adsl2LineAlarmConfTemplateEntry 7 } ::= { adsl2LineAlarmConfTemplateEntry 7 }
------------------------------------------------ ------------------------------------------------
-- adsl2LineAlarmConfProfileTable -- -- adsl2LineAlarmConfProfileTable --
------------------------------------------------ ------------------------------------------------
skipping to change at page 106, line 27 skipping to change at page 106, line 13
adsl2LineAlarmConfProfileRowStatus OBJECT-TYPE adsl2LineAlarmConfProfileRowStatus OBJECT-TYPE
SYNTAX RowStatus SYNTAX RowStatus
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object is used to create a new row or to modify or "This object is used to create a new row or to modify or
delete an existing row in this table. delete an existing row in this table.
A profile is activated by setting this object to 'active'. A profile is activated by setting this object to 'active'.
When 'active' is set, the system will validate the profile. When 'active' is set, the system will validate the profile.
Profile modification is prohibited while this object is set
to 'active'.
Before a profile can be deleted or taken out of service Before a profile can be deleted or taken out of service
(by setting this object to 'destroy' or 'notInService'), (by setting this object to 'destroy' or 'notInService'),
it must be first unreferenced from all associated it must be first unreferenced from all associated
templates." templates."
::= { adsl2LineAlarmConfProfileEntry 14 } ::= { adsl2LineAlarmConfProfileEntry 14 }
------------------------------------------------ ------------------------------------------------
-- adsl2ChAlarmConfProfileTable -- -- adsl2ChAlarmConfProfileTable --
------------------------------------------------ ------------------------------------------------
skipping to change at page 109, line 5 skipping to change at page 108, line 38
SYNTAX RowStatus SYNTAX RowStatus
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object is used to create a new row or to modify or "This object is used to create a new row or to modify or
delete an existing row in this table. delete an existing row in this table.
A profile is activated by setting this object to 'active'. A profile is activated by setting this object to 'active'.
When 'active' is set, the system will validate the profile. When 'active' is set, the system will validate the profile.
Profile modification is prohibited while this object is set
to 'active'.
Before a profile can be deleted or taken out of service Before a profile can be deleted or taken out of service
(by setting this object to 'destroy' or 'notInService'), (by setting this object to 'destroy' or 'notInService'),
it must be first unreferenced from all associated it must be first unreferenced from all associated
templates." templates."
::= { adsl2ChAlarmConfProfileEntry 6 } ::= { adsl2ChAlarmConfProfileEntry 6 }
------------------------------------------------ ------------------------------------------------
-- PM line current counters -- -- PM line current counters --
------------------------------------------------ ------------------------------------------------
adsl2PMLineCurrTable OBJECT-TYPE adsl2PMLineCurrTable OBJECT-TYPE
skipping to change at page 109, line 35 skipping to change at page 109, line 17
adsl2PMLineCurrEntry OBJECT-TYPE adsl2PMLineCurrEntry OBJECT-TYPE
SYNTAX Adsl2PMLineCurrEntry SYNTAX Adsl2PMLineCurrEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table adsl2PMLineCurrTable contains current Performance "The table adsl2PMLineCurrTable contains current Performance
Monitoring results of ADSL2 line. Monitoring results of ADSL2 line.
The index of this table is an interface index where the The index of this table is an interface index where the
interface has an ifType of adsl2(230) and the termination interface has an ifType of adsl2(230) and the termination
unit." unit.
The PM counters in the table are not reset even when the xtU
is reinitialized. They are re-initialized only when the
agent itself is reset or reinitialized. "
INDEX { ifIndex, adsl2PMLCurrUnit } INDEX { ifIndex, adsl2PMLCurrUnit }
::= { adsl2PMLineCurrTable 1 } ::= { adsl2PMLineCurrTable 1 }
Adsl2PMLineCurrEntry ::= Adsl2PMLineCurrEntry ::=
SEQUENCE { SEQUENCE {
adsl2PMLCurrUnit Adsl2Unit, adsl2PMLCurrUnit Adsl2Unit,
adsl2PMLCurrValidIntervals Unsigned32, adsl2PMLCurrValidIntervals Unsigned32,
adsl2PMLCurrInvalidIntervals Unsigned32, adsl2PMLCurrInvalidIntervals Unsigned32,
adsl2PMLCurr15MTimeElapsed HCPerfTimeElapsed, adsl2PMLCurr15MTimeElapsed HCPerfTimeElapsed,
adsl2PMLCurr15MFecs Counter32, adsl2PMLCurr15MFecs Counter32,
skipping to change at page 110, line 41 skipping to change at page 110, line 26
DESCRIPTION DESCRIPTION
"Invalid intervals." "Invalid intervals."
::= { adsl2PMLineCurrEntry 3 } ::= { adsl2PMLineCurrEntry 3 }
adsl2PMLCurr15MTimeElapsed OBJECT-TYPE adsl2PMLCurr15MTimeElapsed OBJECT-TYPE
SYNTAX HCPerfTimeElapsed SYNTAX HCPerfTimeElapsed
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Total elapsed seconds in this interval" "Total elapsed seconds since this PM interval began.
Note that the PM counters are not reset even when the xtU
is reinitialized. They are re-initialized only when the
agent itself is reset or reinitialized. "
::= { adsl2PMLineCurrEntry 4 } ::= { adsl2PMLineCurrEntry 4 }
adsl2PMLCurr15MFecs OBJECT-TYPE adsl2PMLCurr15MFecs OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Count of seconds during this interval that there was at least "Count of seconds during this interval that there was at least
one FEC correction event for one or more bearer channels in one FEC correction event for one or more bearer channels in
skipping to change at page 112, line 37 skipping to change at page 112, line 25
DESCRIPTION DESCRIPTION
"Invalid intervals." "Invalid intervals."
::= { adsl2PMLineCurrEntry 11 } ::= { adsl2PMLineCurrEntry 11 }
adsl2PMLCurr1DayTimeElapsed OBJECT-TYPE adsl2PMLCurr1DayTimeElapsed OBJECT-TYPE
SYNTAX HCPerfTimeElapsed SYNTAX HCPerfTimeElapsed
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Total elapsed seconds in this interval." "Total elapsed seconds since this PM interval began.
Note that the PM counters are not reset even when the xtU
is reinitialized. They are re-initialized only when the
agent itself is reset or reinitialized. "
::= { adsl2PMLineCurrEntry 12 } ::= { adsl2PMLineCurrEntry 12 }
adsl2PMLCurr1DayFecs OBJECT-TYPE adsl2PMLCurr1DayFecs OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Count of seconds during this interval that there was at least "Count of seconds during this interval that there was at least
one FEC correction event for one or more bearer channels in one FEC correction event for one or more bearer channels in
skipping to change at page 114, line 21 skipping to change at page 114, line 12
------------------------------------------------ ------------------------------------------------
-- PM line init current counters -- -- PM line init current counters --
------------------------------------------------ ------------------------------------------------
adsl2PMLineCurrInitTable OBJECT-TYPE adsl2PMLineCurrInitTable OBJECT-TYPE
SYNTAX SEQUENCE OF Adsl2PMLineCurrInitEntry SYNTAX SEQUENCE OF Adsl2PMLineCurrInitEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table adsl2PMLineCurrInitTable contains current "The table adsl2PMLineCurrInitTable contains current
initialization counters of ADSL2 line. " initialization counters of ADSL2 line.
The PM counters in the table are not reset even when the xtU
is reinitialized. They are re-initialized only when the
agent itself is reset or reinitialized. "
::= { adsl2PMLine 2 } ::= { adsl2PMLine 2 }
adsl2PMLineCurrInitEntry OBJECT-TYPE adsl2PMLineCurrInitEntry OBJECT-TYPE
SYNTAX Adsl2PMLineCurrInitEntry SYNTAX Adsl2PMLineCurrInitEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table adsl2PMLineCurrInitTable contains current "The table adsl2PMLineCurrInitTable contains current
initialization counters of ADSL2 line. initialization counters of ADSL2 line.
The index of this table is an interface index where the The index of this table is an interface index where the
skipping to change at page 115, line 9 skipping to change at page 114, line 51
adsl2PMLCurrInit1DayShortInits Unsigned32, adsl2PMLCurrInit1DayShortInits Unsigned32,
adsl2PMLCurrInit1DayFailedShortInits Unsigned32 adsl2PMLCurrInit1DayFailedShortInits Unsigned32
} }
adsl2PMLCurrInit15MTimeElapsed OBJECT-TYPE adsl2PMLCurrInit15MTimeElapsed OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Total elapsed seconds in this interval." "Total elapsed seconds since this PM interval began.
Note that the PM counters are not reset even when the xtU
is reinitialized. They are re-initialized only when the
agent itself is reset or reinitialized. "
::= { adsl2PMLineCurrInitEntry 1 } ::= { adsl2PMLineCurrInitEntry 1 }
adsl2PMLCurrInit15MFullInits OBJECT-TYPE adsl2PMLCurrInit15MFullInits OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Count of full initializations attempted on the line "Count of full initializations attempted on the line
(successful and failed) during this interval." (successful and failed) during this interval."
REFERENCE "ITU-T G.997.1, paragraph 7.2.1" REFERENCE "ITU-T G.997.1, paragraph 7.2.1"
skipping to change at page 116, line 4 skipping to change at page 115, line 49
adsl2PMLCurrInit15MFailedShortInits OBJECT-TYPE adsl2PMLCurrInit15MFailedShortInits OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Count of failed short initializations on the line during this "Count of failed short initializations on the line during this
interval." interval."
REFERENCE "ITU-T G.997.1, paragraph 7.2.1" REFERENCE "ITU-T G.997.1, paragraph 7.2.1"
::= { adsl2PMLineCurrInitEntry 5 } ::= { adsl2PMLineCurrInitEntry 5 }
adsl2PMLCurrInit1DayTimeElapsed OBJECT-TYPE adsl2PMLCurrInit1DayTimeElapsed OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Total elapsed seconds in this interval." "Total elapsed seconds since this PM interval began.
Note that the PM counters are not reset even when the xtU
is reinitialized. They are re-initialized only when the
agent itself is reset or reinitialized. "
::= { adsl2PMLineCurrInitEntry 6 } ::= { adsl2PMLineCurrInitEntry 6 }
adsl2PMLCurrInit1DayFullInits OBJECT-TYPE adsl2PMLCurrInit1DayFullInits OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Count of full initializations attempted on the line "Count of full initializations attempted on the line
(successful and failed) during this interval." (successful and failed) during this interval."
REFERENCE "ITU-T G.997.1, paragraph 7.2.1" REFERENCE "ITU-T G.997.1, paragraph 7.2.1"
skipping to change at page 127, line 31 skipping to change at page 127, line 31
--------------------------------------------------- ---------------------------------------------------
-- PM channel current counters -- -- PM channel current counters --
--------------------------------------------------- ---------------------------------------------------
adsl2PMChCurrTable OBJECT-TYPE adsl2PMChCurrTable OBJECT-TYPE
SYNTAX SEQUENCE OF Adsl2PMChCurrEntry SYNTAX SEQUENCE OF Adsl2PMChCurrEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table adsl2PMChCurrTable contains current Performance "The table adsl2PMChCurrTable contains current Performance
Monitoring results of ADSL2 channel. " Monitoring results of ADSL2 channel.
The PM counters in the table are not reset even when the xtU
is reinitialized. They are re-initialized only when the
agent itself is reset or reinitialized. "
::= { adsl2PMChannel 1 } ::= { adsl2PMChannel 1 }
adsl2PMChCurrEntry OBJECT-TYPE adsl2PMChCurrEntry OBJECT-TYPE
SYNTAX Adsl2PMChCurrEntry SYNTAX Adsl2PMChCurrEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table adsl2PMChCurrTable contains current Performance "The table adsl2PMChCurrTable contains current Performance
Monitoring results of ADSL2 channel. Monitoring results of ADSL2 channel.
The indexes of this table is an interface index where The indexes of this table is an interface index where
skipping to change at page 128, line 46 skipping to change at page 128, line 49
DESCRIPTION DESCRIPTION
"Invalid intervals." "Invalid intervals."
::= { adsl2PMChCurrEntry 3 } ::= { adsl2PMChCurrEntry 3 }
adsl2PMChCurr15MTimeElapsed OBJECT-TYPE adsl2PMChCurr15MTimeElapsed OBJECT-TYPE
SYNTAX HCPerfTimeElapsed SYNTAX HCPerfTimeElapsed
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Total elapsed seconds in this interval." "Total elapsed seconds since this PM interval began.
Note that the PM counters are not reset even when the xtU
is reinitialized. They are re-initialized only when the
agent itself is reset or reinitialized. "
::= { adsl2PMChCurrEntry 4 } ::= { adsl2PMChCurrEntry 4 }
adsl2PMChCurr15MCodingViolations OBJECT-TYPE adsl2PMChCurr15MCodingViolations OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Count of CRC-8 (FEBE for ATU-R) anomalies occurring in the "Count of CRC-8 (FEBE for ATU-R) anomalies occurring in the
channel during the interval. This parameter is inhibited channel during the interval. This parameter is inhibited
during UAS or SES. If the CRC is applied over multiple during UAS or SES. If the CRC is applied over multiple
skipping to change at page 129, line 51 skipping to change at page 130, line 9
DESCRIPTION DESCRIPTION
"Invalid intervals." "Invalid intervals."
::= { adsl2PMChCurrEntry 8 } ::= { adsl2PMChCurrEntry 8 }
adsl2PMChCurr1DayTimeElapsed OBJECT-TYPE adsl2PMChCurr1DayTimeElapsed OBJECT-TYPE
SYNTAX HCPerfTimeElapsed SYNTAX HCPerfTimeElapsed
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Total elapsed seconds in this interval." "Total elapsed seconds since this PM interval began.
Note that the PM counters are not reset even when the xtU
is reinitialized. They are re-initialized only when the
agent itself is reset or reinitialized. "
::= { adsl2PMChCurrEntry 9 } ::= { adsl2PMChCurrEntry 9 }
adsl2PMChCurr1DayCodingViolations OBJECT-TYPE adsl2PMChCurr1DayCodingViolations OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Count of CRC-8 (FEBE for ATU-R) anomalies occurring in the "Count of CRC-8 (FEBE for ATU-R) anomalies occurring in the
channel during the interval. This parameter is inhibited channel during the interval. This parameter is inhibited
during UAS or SES. If the CRC is applied over multiple during UAS or SES. If the CRC is applied over multiple
 End of changes. 38 change blocks. 
55 lines changed or deleted 70 lines changed or added

This html diff was produced by rfcdiff 1.29, available from http://www.levkowetz.com/ietf/tools/rfcdiff/