draft-ietf-adslmib-gbond-atm-mib-02.txt   draft-ietf-adslmib-gbond-atm-mib-03.txt 
Network Working Group E. Beili Network Working Group E. Beili
Internet-Draft Actelis Networks Internet-Draft Actelis Networks
Intended status: Standards Track November 27, 2010 Intended status: Standards Track March 14, 2011
Expires: May 31, 2011 Expires: September 15, 2011
ATM-Based xDSL Bonded Interfaces MIB ATM-Based xDSL Bonded Interfaces MIB
draft-ietf-adslmib-gbond-atm-mib-02.txt draft-ietf-adslmib-gbond-atm-mib-03.txt
Abstract Abstract
This document defines Management Information Base (MIB) module for This document defines Management Information Base (MIB) module for
use with network management protocols in TCP/IP based networks. This use with network management protocols in TCP/IP based networks. This
document proposes an extension to the GBOND-MIB module with a set of document proposes an extension to the GBOND-MIB module with a set of
objects for managing ATM-based multi-pair bonded xDSL interfaces, objects for managing ATM-based multi-pair bonded xDSL interfaces,
defined in ITU-T recommendation G.998.1. defined in ITU-T recommendation G.998.1.
Status of This Memo Status of This Memo
skipping to change at page 1, line 34 skipping to change at page 1, line 34
Internet-Drafts are working documents of the Internet Engineering Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet- working documents as Internet-Drafts. The list of current Internet-
Drafts is at http://datatracker.ietf.org/drafts/current/. Drafts is at http://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress." material or to cite them other than as "work in progress."
This Internet-Draft will expire on May 31, 2011. This Internet-Draft will expire on September 15, 2011.
Copyright Notice Copyright Notice
Copyright (c) 2010 IETF Trust and the persons identified as the Copyright (c) 2011 IETF Trust and the persons identified as the
document authors. All rights reserved. document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info) in effect on the date of (http://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as the Trust Legal Provisions and are provided without warranty as
skipping to change at page 6, line 43 skipping to change at page 6, line 43
Table 1: Mapping of TR-159 Managed Objects Table 1: Mapping of TR-159 Managed Objects
6. G.Bond/ATM MIB Definitions 6. G.Bond/ATM MIB Definitions
GBOND-ATM-MIB DEFINITIONS ::= BEGIN GBOND-ATM-MIB DEFINITIONS ::= BEGIN
IMPORTS IMPORTS
MODULE-IDENTITY, MODULE-IDENTITY,
OBJECT-TYPE, OBJECT-TYPE,
NOTIFICATION-TYPE, NOTIFICATION-TYPE,
mib-2,
Unsigned32, Unsigned32,
Counter32, Counter32
TimeTicks
FROM SNMPv2-SMI -- [RFC2578] FROM SNMPv2-SMI -- [RFC2578]
TEXTUAL-CONVENTION, TEXTUAL-CONVENTION,
TruthValue TruthValue
FROM SNMPv2-TC -- [RFC2579] FROM SNMPv2-TC -- [RFC2579]
MODULE-COMPLIANCE, MODULE-COMPLIANCE,
OBJECT-GROUP, OBJECT-GROUP,
NOTIFICATION-GROUP NOTIFICATION-GROUP
FROM SNMPv2-CONF -- [RFC2580] FROM SNMPv2-CONF -- [RFC2580]
ifIndex, ifIndex
InterfaceIndex
FROM IF-MIB -- [RFC2863] FROM IF-MIB -- [RFC2863]
HCPerfCurrentCount, HCPerfCurrentCount,
HCPerfIntervalCount, HCPerfIntervalCount,
HCPerfIntervalThreshold,
HCPerfValidIntervals, HCPerfValidIntervals,
HCPerfInvalidIntervals, HCPerfInvalidIntervals,
HCPerfTimeElapsed, HCPerfTimeElapsed
HCPerfTotalCount
FROM HC-PerfHist-TC-MIB -- [RFC3705] FROM HC-PerfHist-TC-MIB -- [RFC3705]
; ;
------------------------------------------------------------------------ ------------------------------------------------------------------------
gBondAtmMIB MODULE-IDENTITY gBondAtmMIB MODULE-IDENTITY
LAST-UPDATED "201011270000Z" -- Nov 27, 2010 LAST-UPDATED "201103140000Z" -- Mar 14, 2011
ORGANIZATION "IETF ADSL MIB Working Group" ORGANIZATION "IETF ADSL MIB Working Group"
CONTACT-INFO CONTACT-INFO
"WG charter: "WG charter:
http://www.ietf.org/html.charters/adslmib-charter.html http://www.ietf.org/html.charters/adslmib-charter.html
Mailing Lists: Mailing Lists:
General Discussion: adslmib@ietf.org General Discussion: adslmib@ietf.org
To Subscribe: adslmib-request@ietf.org To Subscribe: adslmib-request@ietf.org
In Body: subscribe your_email_address In Body: subscribe your_email_address
Chair: Menachem Dodge Chair: Menachem Dodge
Postal: ECI Telecom, Ltd. Postal: ECI Telecom, Ltd.
30 Hasivim St., 30 Hasivim St.,
Petach-Tikva 49517 Petach-Tikva 4951169
Israel Israel
Phone: +972-3-926-8421 Phone: +972-3-926-8421
EMail: menachem.dodge@ecitele.com EMail: menachem.dodge@ecitele.com
Editor: Edward Beili Editor: Edward Beili
Postal: Actelis Networks, Inc. Postal: Actelis Networks, Inc.
25 Bazel St., P.O.B. 10173 25 Bazel St., P.O.B. 10173
Petach-Tikva 10173 Petach-Tikva 49103
Israel Israel
Phone: +972-3-924-3491 Phone: +972-3-924-3491
EMail: edward.beili@actelis.com" EMail: edward.beili@actelis.com"
DESCRIPTION DESCRIPTION
"The objects in this MIB module are used to manage the "The objects in this MIB module are used to manage the
multi-pair bonded xDSL Interfaces using ATM inverse multi-pair bonded xDSL Interfaces using ATM inverse
multiplexing, defined in ITU-T recommendation G.998.1 multiplexing, defined in ITU-T recommendation G.998.1
(G.Bond/ATM). (G.Bond/ATM).
skipping to change at page 8, line 33 skipping to change at page 8, line 30
CPE - Customer Premises Equipment CPE - Customer Premises Equipment
GBS - Generic Bonding Sublayer GBS - Generic Bonding Sublayer
GBS-C - Generic Bonded Sub-layer, CO side GBS-C - Generic Bonded Sub-layer, CO side
GBS-R - Generic Bonded Sub-layer, RT (or CPE) side GBS-R - Generic Bonded Sub-layer, RT (or CPE) side
PM - Performance Monitoring PM - Performance Monitoring
RT - Remote Terminal RT - Remote Terminal
SNR - Signal to Noise Ratio SNR - Signal to Noise Ratio
SES - Severely Errored Seconds SES - Severely Errored Seconds
US - Unavailable Seconds US - Unavailable Seconds
Copyright (C) The IETF Trust (2010). Copyright (C) The IETF Trust (2011).
This version of this MIB module is part of RFC YYYY; This version of this MIB module is part of RFC YYYY;
see the RFC itself for full legal notices." see the RFC itself for full legal notices."
REVISION "201011270000Z" -- Nov 27, 2010 REVISION "201103140000Z" -- Mar 14, 2011
DESCRIPTION "Initial version, published as RFC YYYY." DESCRIPTION "Initial version, published as RFC YYYY."
-- EdNote: Replace YYYY with the actual RFC number & -- EdNote: Replace YYYY with the actual RFC number &
-- remove this note -- remove this note
::= { mib-2 ZZZ } ::= { mib-2 ZZZ }
-- EdNote: Replace ZZZ with a real OID once it is -- EdNote: Replace ZZZ with a real OID once it is
-- allocated & remove this note. -- allocated & remove this note.
skipping to change at page 10, line 51 skipping to change at page 10, line 46
"Table for Configuration of G.Bond/ATM ports. Entries in "Table for Configuration of G.Bond/ATM ports. Entries in
this table MUST be maintained in a persistent manner" this table MUST be maintained in a persistent manner"
::= { gBondAtmPort 1 } ::= { gBondAtmPort 1 }
gBondAtmPortConfEntry OBJECT-TYPE gBondAtmPortConfEntry OBJECT-TYPE
SYNTAX GBondAtmPortConfEntry SYNTAX GBondAtmPortConfEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry in the G.Bond/ATM Port Configuration table. "An entry in the G.Bond/ATM Port Configuration table.
Each entry represents an G.Bond/ATM port indexed by the Each entry represents a G.Bond/ATM port indexed by the
ifIndex. Additional configuration parameters are available ifIndex. Additional configuration parameters are available
via the gBondPortConfEntry of GBOND-MIB. via the gBondPortConfEntry of GBOND-MIB.
Note that an G.Bond/ATM port runs on top of a single or Note that a G.Bond/ATM port runs on top of a single or
multiple BCE port(s), which are also indexed by ifIndex." multiple BCE port(s), which are also indexed by ifIndex."
INDEX { ifIndex } INDEX { ifIndex }
::= { gBondAtmPortConfTable 1 } ::= { gBondAtmPortConfTable 1 }
GBondAtmPortConfEntry ::= GBondAtmPortConfEntry ::=
SEQUENCE { SEQUENCE {
gBondAtmUpDiffDelayTolerance MilliSeconds, gBondAtmUpDiffDelayTolerance MilliSeconds,
gBondAtmDnDiffDelayTolerance MilliSeconds, gBondAtmDnDiffDelayTolerance MilliSeconds,
gBondAtmDiffDelayToleranceExceededEnable TruthValue gBondAtmDiffDelayToleranceExceededEnable TruthValue
} }
skipping to change at page 11, line 32 skipping to change at page 11, line 28
DESCRIPTION DESCRIPTION
"A maximum tolerated upstream differential delay (among "A maximum tolerated upstream differential delay (among
the member BCEs) of a G.Bond/ATM port, expressed in ms. the member BCEs) of a G.Bond/ATM port, expressed in ms.
This object is read-write for the GBS-C and irrelevant for This object is read-write for the GBS-C and irrelevant for
the GBS-R ports. the GBS-R ports.
This object maps to TR-159 attribute This object maps to TR-159 attribute
aIMAUpDiffDelayTolerance" aIMAUpDiffDelayTolerance"
REFERENCE REFERENCE
"[T-159] 5.5.2.5; [G.998.1] 11.4.1 (6)" "[TR-159] 5.5.2.5; [G.998.1] 11.4.1 (6)"
::= { gBondAtmPortConfEntry 1 } ::= { gBondAtmPortConfEntry 1 }
gBondAtmDnDiffDelayTolerance OBJECT-TYPE gBondAtmDnDiffDelayTolerance OBJECT-TYPE
SYNTAX MilliSeconds(0..2047) SYNTAX MilliSeconds(0..2047)
UNITS "milliseconds" UNITS "milliseconds"
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A maximum tolerated downstream differential delay (among "A maximum tolerated downstream differential delay (among
the member BCEs) of a G.Bond/ATM port, expressed in ms. the member BCEs) of a G.Bond/ATM port, expressed in ms.
This object is read-write for the GBS-C and irrelevant for This object is read-write for the GBS-C and irrelevant for
the GBS-R ports. the GBS-R ports.
This object maps to TR-159 attribute This object maps to TR-159 attribute
aIMADownDiffDelayTolerance" aIMADownDiffDelayTolerance"
REFERENCE REFERENCE
"[T-159] 5.5.2.6; [G.998.1] 11.4.1 (6)" "[TR-159] 5.5.2.6; [G.998.1] 11.4.1 (6)"
::= { gBondAtmPortConfEntry 2 } ::= { gBondAtmPortConfEntry 2 }
gBondAtmDiffDelayToleranceExceededEnable OBJECT-TYPE gBondAtmDiffDelayToleranceExceededEnable OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates whether gBondAtmUpDiffDelayToleranceExceeded and "Indicates whether gBondAtmUpDiffDelayToleranceExceeded and
gBondAtmDnDiffDelayToleranceExceeded notifications should gBondAtmDnDiffDelayToleranceExceeded notifications should
be generated for G.Bond/ATM port. be generated for G.Bond/ATM port.
skipping to change at page 15, line 19 skipping to change at page 15, line 14
for a G.Bond/ATM port. This table contains live data from the for a G.Bond/ATM port. This table contains live data from the
equipment and as such is NOT persistent." equipment and as such is NOT persistent."
::= { gBondAtmPM 1 } ::= { gBondAtmPM 1 }
gBondAtmPortPerfCurrEntry OBJECT-TYPE gBondAtmPortPerfCurrEntry OBJECT-TYPE
SYNTAX GBondAtmPortPerfCurrEntry SYNTAX GBondAtmPortPerfCurrEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry in the G.Bond/ATM Port PM table. "An entry in the G.Bond/ATM Port PM table.
Each entry represents an G.Bond/ATM port indexed by the Each entry represents a G.Bond/ATM port indexed by the
ifIndex." ifIndex."
INDEX { ifIndex } INDEX { ifIndex }
::= { gBondAtmPortPerfCurrTable 1 } ::= { gBondAtmPortPerfCurrTable 1 }
GBondAtmPortPerfCurrEntry ::= GBondAtmPortPerfCurrEntry ::=
SEQUENCE { SEQUENCE {
gBondAtmPortPerf15MinValidIntervals HCPerfValidIntervals, gBondAtmPortPerf15MinValidIntervals HCPerfValidIntervals,
gBondAtmPortPerf15MinInvalidIntervals HCPerfInvalidIntervals, gBondAtmPortPerf15MinInvalidIntervals HCPerfInvalidIntervals,
gBondAtmPortPerfCurr15MinTimeElapsed HCPerfTimeElapsed, gBondAtmPortPerfCurr15MinTimeElapsed HCPerfTimeElapsed,
gBondAtmPortPerfCurr15MinRxLostCells HCPerfCurrentCount, gBondAtmPortPerfCurr15MinRxLostCells HCPerfCurrentCount,
skipping to change at page 16, line 38 skipping to change at page 16, line 33
REFERENCE REFERENCE
"[TR-159] 5.5.1.33" "[TR-159] 5.5.1.33"
::= { gBondAtmPortPerfCurrEntry 2 } ::= { gBondAtmPortPerfCurrEntry 2 }
gBondAtmPortPerfCurr15MinTimeElapsed OBJECT-TYPE gBondAtmPortPerfCurr15MinTimeElapsed OBJECT-TYPE
SYNTAX HCPerfTimeElapsed SYNTAX HCPerfTimeElapsed
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only count of seconds that have elapsed since the "A read-only count of seconds that have elapsed since the
beginning of the current 15-minute performance history interval. beginning of the current 15-minute performance interval.
This object partially maps to the TR-159 attribute This object partially maps to the TR-159 attribute
aGroupPerfCurr15MinTimeElapsed." aGroupPerfCurr15MinTimeElapsed."
REFERENCE REFERENCE
"[TR-159] 5.5.1.34" "[TR-159] 5.5.1.34"
::= { gBondAtmPortPerfCurrEntry 3 } ::= { gBondAtmPortPerfCurrEntry 3 }
gBondAtmPortPerfCurr15MinRxLostCells OBJECT-TYPE gBondAtmPortPerfCurr15MinRxLostCells OBJECT-TYPE
SYNTAX HCPerfCurrentCount SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only MAX-ACCESS read-only
skipping to change at page 17, line 40 skipping to change at page 17, line 35
"[TR-159] 5.5.2.2" "[TR-159] 5.5.2.2"
::= { gBondAtmPortPerfCurrEntry 5} ::= { gBondAtmPortPerfCurrEntry 5}
gBondAtmPortPerfCurr15MinUpDiffDelay OBJECT-TYPE gBondAtmPortPerfCurr15MinUpDiffDelay OBJECT-TYPE
SYNTAX HCPerfCurrentCount SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only value specifying maximum upstream differential "A read-only value specifying maximum upstream differential
delay between all operational BCEs in the GBS-C, measured in delay between all operational BCEs in the GBS-C, measured in
units of 0.1ms, during the current 15-minute performance history units of 0.1ms, during the current 15-minute performance
interval. interval.
Note that the current max upstream differential delay is Note that the current max upstream differential delay is
indicated by the gBondAtmMaxUpDiffDelay object. indicated by the gBondAtmMaxUpDiffDelay object.
This object is inhibited during Unavailable Seconds (UAS)." This object is inhibited during Unavailable Seconds (UAS)."
REFERENCE REFERENCE
"[TR-159] 5.5.2.3" "[TR-159] 5.5.2.3"
::= { gBondAtmPortPerfCurrEntry 6} ::= { gBondAtmPortPerfCurrEntry 6}
gBondAtmPortPerfCurr15MinDnDiffDelay OBJECT-TYPE gBondAtmPortPerfCurr15MinDnDiffDelay OBJECT-TYPE
SYNTAX HCPerfCurrentCount SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only value specifying maximum downstream differential "A read-only value specifying maximum downstream differential
delay between all operational BCEs in the GBS-C (as percieved delay between all operational BCEs in the GBS-C (as perceived
by GBS-R), measured in units of 0.1ms, during the current by GBS-R), measured in units of 0.1ms, during the current
15-minute performance history interval. 15-minute performance history interval.
Note that the current max downstream differential delay is Note that the current max downstream differential delay is
indicated by the gBondAtmMaxDnDiffDelay object. indicated by the gBondAtmMaxDnDiffDelay object.
This object is inhibited during Unavailable Seconds (UAS)." This object is inhibited during Unavailable Seconds (UAS)."
REFERENCE REFERENCE
"[TR-159] 5.5.2.4" "[TR-159] 5.5.2.4"
::= { gBondAtmPortPerfCurrEntry 7} ::= { gBondAtmPortPerfCurrEntry 7}
skipping to change at page 19, line 9 skipping to change at page 18, line 51
REFERENCE REFERENCE
"[TR-159] 5.5.1.46" "[TR-159] 5.5.1.46"
::= { gBondAtmPortPerfCurrEntry 9 } ::= { gBondAtmPortPerfCurrEntry 9 }
gBondAtmPortPerfCurr1DayTimeElapsed OBJECT-TYPE gBondAtmPortPerfCurr1DayTimeElapsed OBJECT-TYPE
SYNTAX HCPerfTimeElapsed SYNTAX HCPerfTimeElapsed
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only count of seconds that have elapsed since the "A read-only count of seconds that have elapsed since the
beginning of the current 1-day performance history interval." beginning of the current 1-day performance interval."
REFERENCE REFERENCE
"[TR-159] 5.5.1.47" "[TR-159] 5.5.1.47"
::= { gBondAtmPortPerfCurrEntry 10 } ::= { gBondAtmPortPerfCurrEntry 10 }
gBondAtmPortPerfCurr1DayRxLostCells OBJECT-TYPE gBondAtmPortPerfCurr1DayRxLostCells OBJECT-TYPE
SYNTAX HCPerfCurrentCount SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only count of lost ATM cells detected by the G.Bond/ATM "A read-only count of lost ATM cells detected by the G.Bond/ATM
port (e.g. GBS-C), during the current 1-day performance history port (e.g. GBS-C), during the current 1-day performance
interval. interval.
This object is inhibited during Severely Errored Seconds (SES) This object is inhibited during Severely Errored Seconds (SES)
and Unavailable Seconds (UAS)." and Unavailable Seconds (UAS)."
REFERENCE
""
::= { gBondAtmPortPerfCurrEntry 11 } ::= { gBondAtmPortPerfCurrEntry 11 }
gBondAtmPortPerfCurr1DayTxLostCells OBJECT-TYPE gBondAtmPortPerfCurr1DayTxLostCells OBJECT-TYPE
SYNTAX HCPerfCurrentCount SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only count of lost ATM cells detected by the peer "A read-only count of lost ATM cells detected by the peer
G.Bond/ATM port (e.g. by GBS-R for GBS-C), during the current G.Bond/ATM port (e.g. by GBS-R for GBS-C), during the current
1-day performance history interval. 1-day performance history interval.
This object is inhibited during Unavailable Seconds (UAS)." This object is inhibited during Unavailable Seconds (UAS)."
REFERENCE
""
::= { gBondAtmPortPerfCurrEntry 12 } ::= { gBondAtmPortPerfCurrEntry 12 }
gBondAtmPortPerfCurr1DayUpDiffDelay OBJECT-TYPE gBondAtmPortPerfCurr1DayUpDiffDelay OBJECT-TYPE
SYNTAX HCPerfCurrentCount SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only value specifying maximum upstream differential "A read-only value specifying maximum upstream differential
delay between all operational BCEs in the GBS-C, measured in delay between all operational BCEs in the GBS-C, measured in
units of 0.1ms, during the current 1-day performance history units of 0.1ms, during the current 1-day performance
interval. interval.
This object is inhibited during Unavailable Seconds (UAS)." This object is inhibited during Unavailable Seconds (UAS)."
REFERENCE
""
::= { gBondAtmPortPerfCurrEntry 13 } ::= { gBondAtmPortPerfCurrEntry 13 }
gBondAtmPortPerfCurr1DayDnDiffDelay OBJECT-TYPE gBondAtmPortPerfCurr1DayDnDiffDelay OBJECT-TYPE
SYNTAX HCPerfCurrentCount SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only value specifying maximum downstream differential "A read-only value specifying maximum downstream differential
delay between all operational BCEs in the GBS-C, measured in delay between all operational BCEs in the GBS-C, measured in
units of 0.1ms, during the current 1-day performance history units of 0.1ms, during the current 1-day performance
interval. interval.
This object is inhibited during Unavailable Seconds (UAS)." This object is inhibited during Unavailable Seconds (UAS)."
REFERENCE
""
::= { gBondAtmPortPerfCurrEntry 14 } ::= { gBondAtmPortPerfCurrEntry 14 }
-- Port PM history: 15-min buckets -- Port PM history: 15-min buckets
gBondAtmPortPerf15MinTable OBJECT-TYPE gBondAtmPortPerf15MinTable OBJECT-TYPE
SYNTAX SEQUENCE OF GBondAtmPortPerf15MinEntry SYNTAX SEQUENCE OF GBondAtmPortPerf15MinEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table contains historical 15-minute buckets of Performance "This table contains historical 15-minute buckets of Performance
skipping to change at page 25, line 17 skipping to change at page 24, line 51
gBondAtmPortPerf1DayIntervalRxLostCells OBJECT-TYPE gBondAtmPortPerf1DayIntervalRxLostCells OBJECT-TYPE
SYNTAX HCPerfIntervalCount SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only count of lost ATM cells detected by the G.Bond/ATM "A read-only count of lost ATM cells detected by the G.Bond/ATM
port (e.g. GBS-C), during the 1-day performance history interval. port (e.g. GBS-C), during the 1-day performance history interval.
This object is inhibited during Severely Errored Seconds (SES) This object is inhibited during Severely Errored Seconds (SES)
and Unavailable Seconds (UAS)." and Unavailable Seconds (UAS)."
REFERENCE
""
::= { gBondAtmPortPerf1DayEntry 3 } ::= { gBondAtmPortPerf1DayEntry 3 }
gBondAtmPortPerf1DayIntervalTxLostCells OBJECT-TYPE gBondAtmPortPerf1DayIntervalTxLostCells OBJECT-TYPE
SYNTAX HCPerfIntervalCount SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only count of lost ATM cells detected by the peer "A read-only count of lost ATM cells detected by the peer
G.Bond/ATM port (e.g. by GBS-R for GBS-C), during the 1-day G.Bond/ATM port (e.g. by GBS-R for GBS-C), during the 1-day
performance history interval. performance history interval.
This object is inhibited during Unavailable Seconds (UAS)." This object is inhibited during Unavailable Seconds (UAS)."
REFERENCE
""
::= { gBondAtmPortPerf1DayEntry 4 } ::= { gBondAtmPortPerf1DayEntry 4 }
gBondAtmPortPerf1DayIntervalUpDiffDelay OBJECT-TYPE gBondAtmPortPerf1DayIntervalUpDiffDelay OBJECT-TYPE
SYNTAX HCPerfIntervalCount SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only value specifying maximum upstream differential "A read-only value specifying maximum upstream differential
delay between all operational BCEs in the GBS-C, measured in delay between all operational BCEs in the GBS-C, measured in
units of 0.1ms, during the 1-day performance history interval. units of 0.1ms, during the 1-day performance history interval.
This object is inhibited during Unavailable Seconds (UAS)." This object is inhibited during Unavailable Seconds (UAS)."
REFERENCE
""
::= { gBondAtmPortPerf1DayEntry 5 } ::= { gBondAtmPortPerf1DayEntry 5 }
gBondAtmPortPerf1DayIntervalDnDiffDelay OBJECT-TYPE gBondAtmPortPerf1DayIntervalDnDiffDelay OBJECT-TYPE
SYNTAX HCPerfIntervalCount SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only value specifying maximum downstream differential "A read-only value specifying maximum downstream differential
delay between all operational BCEs in the GBS-C, measured in delay between all operational BCEs in the GBS-C, measured in
units of 0.1ms, during the 1-day performance history interval. units of 0.1ms, during the 1-day performance history interval.
This object is inhibited during Unavailable Seconds (UAS)." This object is inhibited during Unavailable Seconds (UAS)."
REFERENCE
""
::= { gBondAtmPortPerf1DayEntry 6 } ::= { gBondAtmPortPerf1DayEntry 6 }
gBondAtmPortPerf1DayIntervalValid OBJECT-TYPE gBondAtmPortPerf1DayIntervalValid OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only object indicating whether or not this history "A read-only object indicating whether or not this history
bucket contains valid data. Valid bucket is reported as true(1) bucket contains valid data. Valid bucket is reported as true(1)
and invalid bucket as false(2). and invalid bucket as false(2).
skipping to change at page 27, line 11 skipping to change at page 26, line 36
gBondAtmBasicGroup OBJECT-GROUP gBondAtmBasicGroup OBJECT-GROUP
OBJECTS { OBJECTS {
gBondAtmRxLostCells, gBondAtmRxLostCells,
gBondAtmTxLostCells, gBondAtmTxLostCells,
gBondAtmMaxUpDiffDelay, gBondAtmMaxUpDiffDelay,
gBondAtmMaxDnDiffDelay gBondAtmMaxDnDiffDelay
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A collection of objects representing management information "A collection of objects representing management information
for an G.Bond/ATM port." for a G.Bond/ATM port."
::= { gBondAtmGroups 1 } ::= { gBondAtmGroups 1 }
gBondAtmAlarmConfGroup OBJECT-GROUP gBondAtmAlarmConfGroup OBJECT-GROUP
OBJECTS { OBJECTS {
gBondAtmUpDiffDelayTolerance, gBondAtmUpDiffDelayTolerance,
gBondAtmDnDiffDelayTolerance, gBondAtmDnDiffDelayTolerance,
gBondAtmDiffDelayToleranceExceededEnable gBondAtmDiffDelayToleranceExceededEnable
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
skipping to change at page 28, line 4 skipping to change at page 27, line 29
gBondAtmPortPerfCurr15MinRxLostCells, gBondAtmPortPerfCurr15MinRxLostCells,
gBondAtmPortPerfCurr15MinTxLostCells, gBondAtmPortPerfCurr15MinTxLostCells,
gBondAtmPortPerfCurr15MinUpDiffDelay, gBondAtmPortPerfCurr15MinUpDiffDelay,
gBondAtmPortPerfCurr15MinDnDiffDelay, gBondAtmPortPerfCurr15MinDnDiffDelay,
gBondAtmPortPerf1DayValidIntervals, gBondAtmPortPerf1DayValidIntervals,
gBondAtmPortPerf1DayInvalidIntervals, gBondAtmPortPerf1DayInvalidIntervals,
gBondAtmPortPerfCurr1DayTimeElapsed, gBondAtmPortPerfCurr1DayTimeElapsed,
gBondAtmPortPerfCurr1DayRxLostCells, gBondAtmPortPerfCurr1DayRxLostCells,
gBondAtmPortPerfCurr1DayTxLostCells, gBondAtmPortPerfCurr1DayTxLostCells,
gBondAtmPortPerfCurr1DayUpDiffDelay, gBondAtmPortPerfCurr1DayUpDiffDelay,
gBondAtmPortPerfCurr1DayDnDiffDelay, gBondAtmPortPerfCurr1DayDnDiffDelay
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A collection of objects supporting OPTIONAL current Performance "A collection of objects supporting OPTIONAL current Performance
Monitoring information for G.Bond/ATM ports." Monitoring information for G.Bond/ATM ports."
::= { gBondAtmGroups 4 } ::= { gBondAtmGroups 4 }
gBondAtmPerf15MinGroup OBJECT-GROUP gBondAtmPerf15MinGroup OBJECT-GROUP
OBJECTS { OBJECTS {
gBondAtmPortPerf15MinIntervalMoniTime, gBondAtmPortPerf15MinIntervalMoniTime,
gBondAtmPortPerf15MinIntervalRxLostCells, gBondAtmPortPerf15MinIntervalRxLostCells,
gBondAtmPortPerf15MinIntervalTxLostCells, gBondAtmPortPerf15MinIntervalTxLostCells,
gBondAtmPortPerf15MinIntervalUpDiffDelay, gBondAtmPortPerf15MinIntervalUpDiffDelay,
gBondAtmPortPerf15MinIntervalDnDiffDelay, gBondAtmPortPerf15MinIntervalDnDiffDelay,
gBondAtmPortPerf15MinIntervalValid, gBondAtmPortPerf15MinIntervalValid
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A collection of objects supporting OPTIONAL historical "A collection of objects supporting OPTIONAL historical
Performance Monitoring information for G.Bond/ATM ports, during Performance Monitoring information for G.Bond/ATM ports, during
previous 15-minute intervals ." previous 15-minute intervals ."
::= { gBondAtmGroups 5 } ::= { gBondAtmGroups 5 }
gBondAtmPerf1DayGroup OBJECT-GROUP gBondAtmPerf1DayGroup OBJECT-GROUP
OBJECTS { OBJECTS {
gBondAtmPortPerf1DayIntervalMoniTime, gBondAtmPortPerf1DayIntervalMoniTime,
gBondAtmPortPerf1DayIntervalRxLostCells, gBondAtmPortPerf1DayIntervalRxLostCells,
gBondAtmPortPerf1DayIntervalTxLostCells, gBondAtmPortPerf1DayIntervalTxLostCells,
gBondAtmPortPerf1DayIntervalUpDiffDelay, gBondAtmPortPerf1DayIntervalUpDiffDelay,
gBondAtmPortPerf1DayIntervalDnDiffDelay, gBondAtmPortPerf1DayIntervalDnDiffDelay,
gBondAtmPortPerf1DayIntervalValid, gBondAtmPortPerf1DayIntervalValid
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A collection of objects supporting OPTIONAL historical "A collection of objects supporting OPTIONAL historical
Performance Monitoring information for G.Bond/ATM ports, during Performance Monitoring information for G.Bond/ATM ports, during
previous 1-day intervals ." previous 1-day intervals ."
::= { gBondAtmGroups 6 } ::= { gBondAtmGroups 6 }
-- Compliance Statements -- Compliance Statements
skipping to change at page 29, line 43 skipping to change at page 29, line 20
::= { gBondAtmCompliances 1 } ::= { gBondAtmCompliances 1 }
END END
7. Security Considerations 7. Security Considerations
There is a number of managed objects defined in the GBOND-ATM-MIB There is a number of managed objects defined in the GBOND-ATM-MIB
module that have a MAX-ACCESS clause of read-write. Writing to these module that have a MAX-ACCESS clause of read-write. Writing to these
objects can have potentially disruptive effects on network operation, objects can have potentially disruptive effects on network operation,
for example: for example:
o Changing of gBondAtmPortConfTable configuration paratemers MAY o Changing of gBondAtmPortConfTable configuration parameters MAY
lead to a potential Service Level Agreement (SLA) breach, for lead to a potential Service Level Agreement (SLA) breach, for
example if a traffic delay is increased as a result of the higher example if a traffic delay is increased as a result of the higher
delay tolerance (increased gBondAtmUpDiffDelayTolerance and/or delay tolerance (increased gBondAtmUpDiffDelayTolerance and/or
gBondAtmDnDiffDelayTolerance), or the differential delay tolerance gBondAtmDnDiffDelayTolerance), or the differential delay tolerance
notifications are disabled by manipulating the notifications are disabled by manipulating the
gBondAtmDiffDelayToleranceExceededEnable parameter. gBondAtmDiffDelayToleranceExceededEnable parameter.
The user of the GBOND-ATM-MIB module must therefore be aware that The user of the GBOND-ATM-MIB module must therefore be aware that
support for SET operations in a non-secure environment without proper support for SET operations in a non-secure environment without proper
protection can have a negative effect on network operations. protection can have a negative effect on network operations.
skipping to change at page 31, line 8 skipping to change at page 30, line 33
10. References 10. References
10.1. Normative References 10.1. Normative References
[G.998.1] ITU-T, "ATM-based multi-pair bonding", [G.998.1] ITU-T, "ATM-based multi-pair bonding",
ITU-T Recommendation G.998.3, ITU-T Recommendation G.998.3,
January 2005. January 2005.
[I-D.ietf-adslmib-gbond-mib] Beili, E. and M. Morgenstern, "xDSL [I-D.ietf-adslmib-gbond-mib] Beili, E. and M. Morgenstern, "xDSL
multi-pair bonding (G.Bond) MIB", multi-pair bonding (G.Bond) MIB",
draft-ietf-adslmib-gbond-mib-05 (work draft-ietf-adslmib-gbond-mib-06 (work
in progress), November 2010. in progress), March 2011.
[RFC2119] Bradner, S., "Key words for use in RFCs [RFC2119] Bradner, S., "Key words for use in RFCs
to Indicate Requirement Levels", to Indicate Requirement Levels",
BCP 14, RFC 2119, March 1997. BCP 14, RFC 2119, March 1997.
[RFC2578] McCloghrie, K., Ed., Perkins, D., Ed., [RFC2578] McCloghrie, K., Ed., Perkins, D., Ed.,
and J. Schoenwaelder, Ed., "Structure and J. Schoenwaelder, Ed., "Structure
of Management Information Version 2 of Management Information Version 2
(SMIv2)", STD 58, RFC 2578, April 1999. (SMIv2)", STD 58, RFC 2578, April 1999.
 End of changes. 40 change blocks. 
52 lines changed or deleted 34 lines changed or added

This html diff was produced by rfcdiff 1.41. The latest version is available from http://tools.ietf.org/tools/rfcdiff/