draft-ietf-adslmib-gbond-atm-mib-04.txt   draft-ietf-adslmib-gbond-atm-mib-05.txt 
Network Working Group E. Beili Network Working Group E. Beili
Internet-Draft Actelis Networks Internet-Draft Actelis Networks
Intended status: Standards Track May 26, 2011 Intended status: Standards Track February 02, 2012
Expires: November 27, 2011 Expires: August 5, 2012
ATM-Based xDSL Bonded Interfaces MIB ATM-Based xDSL Bonded Interfaces MIB
draft-ietf-adslmib-gbond-atm-mib-04.txt draft-ietf-adslmib-gbond-atm-mib-05.txt
Abstract Abstract
This document defines Management Information Base (MIB) module for This document defines Management Information Base (MIB) module for
use with network management protocols in TCP/IP based networks. This use with network management protocols in TCP/IP based networks. This
document proposes an extension to the GBOND-MIB module with a set of document proposes an extension to the GBOND-MIB module with a set of
objects for managing ATM-based multi-pair bonded xDSL interfaces, objects for managing ATM-based multi-pair bonded xDSL interfaces,
defined in ITU-T recommendation G.998.1. defined in ITU-T recommendation G.998.1.
Status of This Memo Status of This Memo
skipping to change at page 1, line 34 skipping to change at page 1, line 34
Internet-Drafts are working documents of the Internet Engineering Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet- working documents as Internet-Drafts. The list of current Internet-
Drafts is at http://datatracker.ietf.org/drafts/current/. Drafts is at http://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress." material or to cite them other than as "work in progress."
This Internet-Draft will expire on November 27, 2011. This Internet-Draft will expire on August 5, 2012.
Copyright Notice Copyright Notice
Copyright (c) 2011 IETF Trust and the persons identified as the Copyright (c) 2012 IETF Trust and the persons identified as the
document authors. All rights reserved. document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info) in effect on the date of (http://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as the Trust Legal Provisions and are provided without warranty as
skipping to change at page 2, line 19 skipping to change at page 2, line 19
3. The DSL Forum Management Framework for xDSL Bonding . . . . . 3 3. The DSL Forum Management Framework for xDSL Bonding . . . . . 3
4. Relationship to other MIB modules . . . . . . . . . . . . . . 4 4. Relationship to other MIB modules . . . . . . . . . . . . . . 4
4.1. Relationship to Interfaces Group MIB module . . . . . . . 4 4.1. Relationship to Interfaces Group MIB module . . . . . . . 4
4.2. Relationship to G.Bond MIB module . . . . . . . . . . . . 4 4.2. Relationship to G.Bond MIB module . . . . . . . . . . . . 4
4.3. Relationship to ATM MIB module . . . . . . . . . . . . . . 4 4.3. Relationship to ATM MIB module . . . . . . . . . . . . . . 4
5. MIB Structure . . . . . . . . . . . . . . . . . . . . . . . . 4 5. MIB Structure . . . . . . . . . . . . . . . . . . . . . . . . 4
5.1. Overview . . . . . . . . . . . . . . . . . . . . . . . . . 4 5.1. Overview . . . . . . . . . . . . . . . . . . . . . . . . . 4
5.2. Performance Monitoring . . . . . . . . . . . . . . . . . . 5 5.2. Performance Monitoring . . . . . . . . . . . . . . . . . . 5
5.3. Mapping of Broadband Forum TR-159 Managed Objects . . . . 5 5.3. Mapping of Broadband Forum TR-159 Managed Objects . . . . 5
6. G.Bond/ATM MIB Definitions . . . . . . . . . . . . . . . . . . 6 6. G.Bond/ATM MIB Definitions . . . . . . . . . . . . . . . . . . 6
7. Security Considerations . . . . . . . . . . . . . . . . . . . 29 7. Security Considerations . . . . . . . . . . . . . . . . . . . 30
8. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 30 8. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 31
9. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . 30 9. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . 31
10. References . . . . . . . . . . . . . . . . . . . . . . . . . . 30 10. References . . . . . . . . . . . . . . . . . . . . . . . . . . 31
10.1. Normative References . . . . . . . . . . . . . . . . . . . 30 10.1. Normative References . . . . . . . . . . . . . . . . . . . 31
10.2. Informative References . . . . . . . . . . . . . . . . . . 31 10.2. Informative References . . . . . . . . . . . . . . . . . . 32
1. Introduction 1. Introduction
The ATM-Based Multi-Pair Bonding, a.k.a. G.Bond/ATM, is specified in The ATM-Based Multi-Pair Bonding, a.k.a. G.Bond/ATM, is specified in
ITU-T G.998.1 recommendation [G.998.1], which defines a method for ITU-T G.998.1 recommendation [G.998.1], which defines a method for
bonding (or aggregating) of multiple xDSL lines (or individual bearer bonding (or aggregating) of multiple xDSL lines (or individual bearer
channels in multiple xDSL lines) into a single bi-directional logical channels in multiple xDSL lines) into a single bi-directional logical
link carrying an ATM stream. link carrying an ATM stream.
This specification can be viewed as an evolution of the legacy This specification can be viewed as an evolution of the legacy
skipping to change at page 5, line 31 skipping to change at page 5, line 31
buckets (interval-counters) are implemented using the textual buckets (interval-counters) are implemented using the textual
conventions defined in the HC-PerfHist-TC-MIB [RFC3705]. The HC- conventions defined in the HC-PerfHist-TC-MIB [RFC3705]. The HC-
PerfHist-TC-MIB defines 64-bit versions of the textual conventions PerfHist-TC-MIB defines 64-bit versions of the textual conventions
found in PerfHist-TC-MIB [RFC3593]. found in PerfHist-TC-MIB [RFC3593].
The agent SHOULD align the beginning of each interval to a fifteen The agent SHOULD align the beginning of each interval to a fifteen
minute boundary of a wall clock. Likewise, the beginning of each one minute boundary of a wall clock. Likewise, the beginning of each one
day intervals SHOULD be aligned with the start of a day. day intervals SHOULD be aligned with the start of a day.
Counters are not reset when a GBS is reinitialized, but rather only Counters are not reset when a GBS is reinitialized, but rather only
when the agent is reset or reinitialized (or under specific request when the agent is reset or reinitialized.
outside the scope of this MIB module).
Note that the accumulation of certain performance events for a
monitored entity is inhibited (counting stops) during periods of
service unavailability on that entity. The DESCRIPTION clause of
performance monitoring counters in this MIB module specifies which of
the counters are inhibited during periods of service unavailability.
5.3. Mapping of Broadband Forum TR-159 Managed Objects 5.3. Mapping of Broadband Forum TR-159 Managed Objects
This section contains the mapping between relevant managed objects This section contains the mapping between relevant managed objects
(attributes) defined in [TR-159] and the managed objects defined in (attributes) defined in [TR-159] and the managed objects defined in
this document. this document.
+-------------------------------+-----------------------------------+ +----------------------------+--------------------------------------+
| TR-159 Managed Object | Corresponding SNMP Object | | TR-159 Managed Object | Corresponding SNMP Object |
+-------------------------------+-----------------------------------+ +----------------------------+--------------------------------------+
| oBondATM - Basic Package | | | oBondATM - Basic Package | |
| (Mandatory) | | | (Mandatory) | |
+-------------------------------+-----------------------------------+ +----------------------------+--------------------------------------+
| aIMARxLostCells | gBondAtmRxLostCells | | aIMARxLostCells | gBondAtmPortStatRxLostCells |
+-------------------------------+-----------------------------------+ +----------------------------+--------------------------------------+
| aIMAPeerRxLostCells | gBondAtmTxLostCells | | aIMAPeerRxLostCells | gBondAtmPortStatTxLostCells |
+-------------------------------+-----------------------------------+ +----------------------------+--------------------------------------+
| aIMAMaxUpDiffDelay | gBondAtmMaxUpDiffDelay | | aIMAMaxUpDiffDelay | gBondAtmPortStatMaxUpDiffDelay |
+-------------------------------+-----------------------------------+ +----------------------------+--------------------------------------+
| aIMAMaxDownDiffDelay | gBondAtmMaxDnDiffDelay | | aIMAMaxDownDiffDelay | gBondAtmPortStatMaxDnDiffDelay |
+-------------------------------+-----------------------------------+ +----------------------------+--------------------------------------+
| aIMAUpDiffDelayTolerance | gBondAtmUpDiffDelayTolerance | | aIMAUpDiffDelayTolerance | gBondAtmPortConfUpDiffDelayTolerance |
+-------------------------------+-----------------------------------+ +----------------------------+--------------------------------------+
| aIMADownDiffDelayTolerance | gBondAtmDnDiffDelayTolerance | | aIMADownDiffDelayTolerance | gBondAtmPortConfDnDiffDelayTolerance |
+-------------------------------+-----------------------------------+ +----------------------------+--------------------------------------+
| aIMADiffDelayToleranceExceede | gBondAtmDiffDelayToleranceExceede | | aIMADiffDelayToleranceExce | gBondAtmPortConfDiffDelayToleranceEx |
| dEnable | dEnable | | ededEnable | ceededEnable |
+-------------------------------+-----------------------------------+ +----------------------------+--------------------------------------+
| nIMAUpDiffDelayToleranceExcee | gBondAtmUpDiffDelayToleranceExcee | | nIMAUpDiffDelayToleranceEx | gBondAtmUpDiffDelayToleranceExceeded |
| ded | ded | | ceeded | |
+-------------------------------+-----------------------------------+ +----------------------------+--------------------------------------+
| nIMADownDiffDelayToleranceExc | gBondAtmDnDiffDelayToleranceExcee | | nIMADownDiffDelayTolerance | gBondAtmDnDiffDelayToleranceExceeded |
| eeded | ded | | Exceeded | |
+-------------------------------+-----------------------------------+ +----------------------------+--------------------------------------+
Table 1: Mapping of TR-159 Managed Objects Table 1: Mapping of TR-159 Managed Objects
6. G.Bond/ATM MIB Definitions 6. G.Bond/ATM MIB Definitions
GBOND-ATM-MIB DEFINITIONS ::= BEGIN GBOND-ATM-MIB DEFINITIONS ::= BEGIN
IMPORTS IMPORTS
MODULE-IDENTITY, MODULE-IDENTITY,
OBJECT-TYPE, OBJECT-TYPE,
NOTIFICATION-TYPE, NOTIFICATION-TYPE,
mib-2, mib-2,
Unsigned32, Unsigned32,
Counter32 Counter32
FROM SNMPv2-SMI -- [RFC2578] FROM SNMPv2-SMI -- [RFC2578]
TEXTUAL-CONVENTION, TEXTUAL-CONVENTION,
skipping to change at page 7, line 16 skipping to change at page 7, line 16
FROM IF-MIB -- [RFC2863] FROM IF-MIB -- [RFC2863]
HCPerfCurrentCount, HCPerfCurrentCount,
HCPerfIntervalCount, HCPerfIntervalCount,
HCPerfValidIntervals, HCPerfValidIntervals,
HCPerfInvalidIntervals, HCPerfInvalidIntervals,
HCPerfTimeElapsed HCPerfTimeElapsed
FROM HC-PerfHist-TC-MIB -- [RFC3705] FROM HC-PerfHist-TC-MIB -- [RFC3705]
; ;
------------------------------------------------------------------------ ------------------------------------------------------------------------
gBondAtmMIB MODULE-IDENTITY gBondAtmMIB MODULE-IDENTITY
LAST-UPDATED "201105260000Z" -- May 26, 2011 LAST-UPDATED "201202020000Z" -- Feb 02, 2012
ORGANIZATION "IETF ADSL MIB Working Group" ORGANIZATION "IETF ADSL MIB Working Group"
CONTACT-INFO CONTACT-INFO
"WG charter: "WG charter:
http://www.ietf.org/html.charters/adslmib-charter.html http://www.ietf.org/html.charters/adslmib-charter.html
Mailing Lists: Mailing Lists:
General Discussion: adslmib@ietf.org General Discussion: adslmib@ietf.org
To Subscribe: adslmib-request@ietf.org To Subscribe: adslmib-request@ietf.org
In Body: subscribe your_email_address In Body: subscribe your_email_address
skipping to change at page 8, line 30 skipping to change at page 8, line 30
CPE - Customer Premises Equipment CPE - Customer Premises Equipment
GBS - Generic Bonding Sublayer GBS - Generic Bonding Sublayer
GBS-C - Generic Bonded Sub-layer, CO side GBS-C - Generic Bonded Sub-layer, CO side
GBS-R - Generic Bonded Sub-layer, RT (or CPE) side GBS-R - Generic Bonded Sub-layer, RT (or CPE) side
PM - Performance Monitoring PM - Performance Monitoring
RT - Remote Terminal RT - Remote Terminal
SNR - Signal to Noise Ratio SNR - Signal to Noise Ratio
SES - Severely Errored Seconds SES - Severely Errored Seconds
US - Unavailable Seconds US - Unavailable Seconds
Copyright (C) The IETF Trust (2011). Copyright (C) The IETF Trust (2012).
This version of this MIB module is part of RFC YYYY; This version of this MIB module is part of RFC YYYY;
see the RFC itself for full legal notices." see the RFC itself for full legal notices."
REVISION "201105260000Z" -- May 26, 2011 REVISION "201202020000Z" -- Feb 02, 2012
DESCRIPTION "Initial version, published as RFC YYYY." DESCRIPTION "Initial version, published as RFC YYYY."
-- EdNote: Replace YYYY with the actual RFC number & -- EdNote: Replace YYYY with the actual RFC number &
-- remove this note -- remove this note
::= { mib-2 ZZZ } ::= { mib-2 ZZZ }
-- EdNote: Replace ZZZ with a real OID once it is -- EdNote: Replace ZZZ with a real OID once it is
-- allocated & remove this note. -- allocated & remove this note.
skipping to change at page 9, line 23 skipping to change at page 9, line 23
SYNTAX Unsigned32 SYNTAX Unsigned32
-- Port Notifications Group -- Port Notifications Group
gBondAtmPortNotifications OBJECT IDENTIFIER gBondAtmPortNotifications OBJECT IDENTIFIER
::= { gBondAtmPort 0 } ::= { gBondAtmPort 0 }
gBondAtmUpDiffDelayToleranceExceeded NOTIFICATION-TYPE gBondAtmUpDiffDelayToleranceExceeded NOTIFICATION-TYPE
OBJECTS { OBJECTS {
-- ifIndex is not needed here since we are under specific GBS -- ifIndex is not needed here since we are under specific GBS
gBondAtmUpDiffDelayTolerance, gBondAtmPortConfUpDiffDelayTolerance,
gBondAtmMaxUpDiffDelay gBondAtmPortStatMaxUpDiffDelay
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This notification indicates that the maximum upstream "This notification indicates that the maximum upstream
differential delay has exceeded the max upstream differential differential delay has exceeded the max upstream differential
delay threshold, specified by gBondAtmUpDiffDelayTolerance. delay threshold, specified by
gBondAtmPortConfUpDiffDelayTolerance.
This notification MAY be sent for the GBS-C ports while the This notification MAY be sent for the GBS-C ports while the
port is up, on the crossing event in both directions: from port is up, on the crossing event in both directions: from
normal (diff. delay is above the threshold) to low (diff. normal (diff. delay is above the threshold) to low (diff.
delay equals the threshold or below it) and from low to delay equals the threshold or below it) and from low to
normal. This notification is not applicable to the GBS-R normal. This notification is not applicable to the GBS-R
ports. ports.
Generation of this notification is controlled by the Generation of this notification is controlled by the
gBondAtmDiffDelayToleranceExceededEnable attribute. gBondAtmPortConfDiffDelayToleranceExceededEnable attribute.
This object maps to the TR-159 notification This object maps to the TR-159 notification
nIMAUpDiffDelayToleranceExceeded." nIMAUpDiffDelayToleranceExceeded."
REFERENCE REFERENCE
"[TR-159] 5.5.2.8" "[TR-159] 5.5.2.8"
::= { gBondAtmPortNotifications 1 } ::= { gBondAtmPortNotifications 1 }
gBondAtmDnDiffDelayToleranceExceeded NOTIFICATION-TYPE gBondAtmDnDiffDelayToleranceExceeded NOTIFICATION-TYPE
OBJECTS { OBJECTS {
-- ifIndex is not needed here since we are under specific GBS -- ifIndex is not needed here since we are under specific GBS
gBondAtmDnDiffDelayTolerance, gBondAtmPortConfDnDiffDelayTolerance,
gBondAtmMaxDnDiffDelay gBondAtmPortStatMaxDnDiffDelay
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This notification indicates that the maximum downstream "This notification indicates that the maximum downstream
differential delay has exceeded the max downstream differential delay has exceeded the max downstream
differential delay threshold, specified by differential delay threshold, specified by
gBondAtmDnDiffDelayTolerance. gBondAtmPortConfDnDiffDelayTolerance.
This notification MAY be sent for the GBS-C ports while the This notification MAY be sent for the GBS-C ports while the
port is up, on the crossing event in both directions: from port is up, on the crossing event in both directions: from
normal (diff. delay is above the threshold) to low (diff. normal (diff. delay is above the threshold) to low (diff.
delay equals the threshold or below it) and from low to delay equals the threshold or below it) and from low to
normal. This notification is not applicable to the GBS-R normal. This notification is not applicable to the GBS-R
ports. ports.
Generation of this notification is controlled by the Generation of this notification is controlled by the
gBondAtmDiffDelayToleranceExceededEnable attribute. gBondAtmPortConfDiffDelayToleranceExceededEnable attribute.
This object maps to the TR-159 notification This object maps to the TR-159 notification
nIMADownDiffDelayToleranceExceeded." nIMADownDiffDelayToleranceExceeded."
REFERENCE REFERENCE
"[TR-159] 5.5.2.9" "[TR-159] 5.5.2.9"
::= { gBondAtmPortNotifications 2 } ::= { gBondAtmPortNotifications 2 }
-- G.Bond/ATM Port group -- G.Bond/ATM Port group
gBondAtmPortConfTable OBJECT-TYPE gBondAtmPortConfTable OBJECT-TYPE
skipping to change at page 10, line 51 skipping to change at page 11, line 4
SYNTAX GBondAtmPortConfEntry SYNTAX GBondAtmPortConfEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry in the G.Bond/ATM Port Configuration table. "An entry in the G.Bond/ATM Port Configuration table.
Each entry represents a G.Bond/ATM port indexed by the Each entry represents a G.Bond/ATM port indexed by the
ifIndex. Additional configuration parameters are available ifIndex. Additional configuration parameters are available
via the gBondPortConfEntry of GBOND-MIB. via the gBondPortConfEntry of GBOND-MIB.
Note that a G.Bond/ATM port runs on top of a single or Note that a G.Bond/ATM port runs on top of a single or
multiple BCE port(s), which are also indexed by ifIndex." multiple BCE port(s), which are also indexed by ifIndex."
INDEX { ifIndex } INDEX { ifIndex }
::= { gBondAtmPortConfTable 1 } ::= { gBondAtmPortConfTable 1 }
GBondAtmPortConfEntry ::= GBondAtmPortConfEntry ::=
SEQUENCE { SEQUENCE {
gBondAtmUpDiffDelayTolerance MilliSeconds, gBondAtmPortConfUpDiffDelayTolerance MilliSeconds,
gBondAtmDnDiffDelayTolerance MilliSeconds, gBondAtmPortConfDnDiffDelayTolerance MilliSeconds,
gBondAtmDiffDelayToleranceExceededEnable TruthValue gBondAtmPortConfDiffDelayToleranceExceededEnable TruthValue
} }
gBondAtmUpDiffDelayTolerance OBJECT-TYPE gBondAtmPortConfUpDiffDelayTolerance OBJECT-TYPE
SYNTAX MilliSeconds(0..2047) SYNTAX MilliSeconds(0..2047)
UNITS "milliseconds" UNITS "milliseconds"
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A maximum tolerated upstream differential delay (among "A maximum tolerated upstream differential delay (among
the member BCEs) of a G.Bond/ATM port, expressed in ms. the member BCEs) of a G.Bond/ATM port, expressed in ms.
This object is read-write for the GBS-C and irrelevant for This object is read-write for the GBS-C ports.
the GBS-R ports. It is irrelevant for the GBS-R ports - an attempt to read or
change this object MUST be rejected (in case of SNMP with the
error inconsistentValue).
This object maps to TR-159 attribute This object maps to TR-159 attribute
aIMAUpDiffDelayTolerance" aIMAUpDiffDelayTolerance"
REFERENCE REFERENCE
"[TR-159] 5.5.2.5; [G.998.1] 11.4.1 (6)" "[TR-159] 5.5.2.5; [G.998.1] 11.4.1 (6)"
::= { gBondAtmPortConfEntry 1 } ::= { gBondAtmPortConfEntry 1 }
gBondAtmDnDiffDelayTolerance OBJECT-TYPE gBondAtmPortConfDnDiffDelayTolerance OBJECT-TYPE
SYNTAX MilliSeconds(0..2047) SYNTAX MilliSeconds(0..2047)
UNITS "milliseconds" UNITS "milliseconds"
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A maximum tolerated downstream differential delay (among "A maximum tolerated downstream differential delay (among
the member BCEs) of a G.Bond/ATM port, expressed in ms. the member BCEs) of a G.Bond/ATM port, expressed in ms.
This object is read-write for the GBS-C and irrelevant for This object is read-write for the GBS-C ports.
the GBS-R ports. It is irrelevant for the GBS-R ports - an attempt to read or
change this object MUST be rejected (in case of SNMP with the
error inconsistentValue).
This object maps to TR-159 attribute This object maps to TR-159 attribute
aIMADownDiffDelayTolerance" aIMADownDiffDelayTolerance"
REFERENCE REFERENCE
"[TR-159] 5.5.2.6; [G.998.1] 11.4.1 (6)" "[TR-159] 5.5.2.6; [G.998.1] 11.4.1 (6)"
::= { gBondAtmPortConfEntry 2 } ::= { gBondAtmPortConfEntry 2 }
gBondAtmDiffDelayToleranceExceededEnable OBJECT-TYPE gBondAtmPortConfDiffDelayToleranceExceededEnable OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates whether gBondAtmUpDiffDelayToleranceExceeded and "Indicates whether gBondAtmUpDiffDelayToleranceExceeded and
gBondAtmDnDiffDelayToleranceExceeded notifications should gBondAtmDnDiffDelayToleranceExceeded notifications should
be generated for G.Bond/ATM port. be generated for G.Bond/ATM port.
Value of true(1) indicates that the notifications are enabled. Value of true(1) indicates that the notifications are enabled.
Value of false(2) indicates that the notifications are Value of false(2) indicates that the notifications are
disabled. disabled.
This object is read-write for the GBS-C and irrelevant for This object is read-write for the GBS-C.
the GBS-R ports. It is irrelevant for the GBS-R ports - an attempt to read or
This object MUST be maintained in a persistent manner. change this object MUST be rejected (in case of SNMP with the
error inconsistentValue).
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aIMADiffDelayToleranceExceededEnable." aIMADiffDelayToleranceExceededEnable."
REFERENCE REFERENCE
"[TR-159] 5.5.5.7" "[TR-159] 5.5.5.7"
::= { gBondAtmPortConfEntry 3 } ::= { gBondAtmPortConfEntry 3 }
gBondAtmPortStatusTable OBJECT-TYPE gBondAtmPortStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF GBondAtmPortStatusEntry SYNTAX SEQUENCE OF GBondAtmPortStatEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table provides overall status information of G.Bond/ATM "This table provides overall status information of G.Bond/ATM
ports, complementing the generic status information from the ports, complementing the generic status information from the
ifTable of IF-MIB and gBondFltStatus of GBOND-MIB. ifTable of IF-MIB and gBondFltStatus of GBOND-MIB.
Additional status information about connected BCEs is available Additional status information about connected BCEs is available
from the relevant line MIBs. from the relevant line MIBs.
This table contains live data from the equipment. As such, it is This table contains live data from the equipment. As such, it is
NOT persistent." NOT persistent."
::= { gBondAtmPort 2 } ::= { gBondAtmPort 2 }
gBondAtmPortStatusEntry OBJECT-TYPE gBondAtmPortStatEntry OBJECT-TYPE
SYNTAX GBondAtmPortStatusEntry SYNTAX GBondAtmPortStatEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry in the G.Bond/ATM port Status table. "An entry in the G.Bond/ATM port Status table.
Each entry represents a G.Bond/ATM port indexed by the Each entry represents a G.Bond/ATM port indexed by the
ifIndex. ifIndex.
Note that a GBS port runs on top of a single or multiple BCE Note that a GBS port runs on top of a single or multiple BCE
port(s), which are also indexed by ifIndex." port(s), which are also indexed by ifIndex."
INDEX { ifIndex } INDEX { ifIndex }
::= { gBondAtmPortStatusTable 1 } ::= { gBondAtmPortStatTable 1 }
GBondAtmPortStatusEntry ::= GBondAtmPortStatEntry ::=
SEQUENCE { SEQUENCE {
gBondAtmRxLostCells Counter32, gBondAtmPortStatRxLostCells Counter32,
gBondAtmTxLostCells Counter32, gBondAtmPortStatTxLostCells Counter32,
gBondAtmMaxUpDiffDelay Unsigned32, gBondAtmPortStatMaxUpDiffDelay Unsigned32,
gBondAtmMaxDnDiffDelay Unsigned32 gBondAtmPortStatMaxDnDiffDelay Unsigned32
} }
gBondAtmRxLostCells OBJECT-TYPE gBondAtmPortStatRxLostCells OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
UNITS "cells"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of lost ATM cells detected by the G.Bond/ATM port "The number of lost ATM cells detected by the G.Bond/ATM port
in the receive direction, i.e. upstream direction for in the receive direction, i.e. upstream direction for
a GBS-C port. a GBS-C port.
Discontinuities in the value of this counter can occur at Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other times re-initialization of the management system, and at other times
as indicated by the value of ifCounterDiscontinuityTime, as indicated by the value of ifCounterDiscontinuityTime,
defined in IF-MIB. defined in IF-MIB.
This object maps to TR-159 attribute aIMARxLostCells." This object maps to TR-159 attribute aIMARxLostCells."
REFERENCE REFERENCE
"[TR-159] 5.5.2.1; [G.998.1] 11.4.2 (4)" "[TR-159] 5.5.2.1; [G.998.1] 11.4.2 (4)"
::= { gBondAtmPortStatusEntry 1 } ::= { gBondAtmPortStatEntry 1 }
gBondAtmTxLostCells OBJECT-TYPE gBondAtmPortStatTxLostCells OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
UNITS "cells"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of lost ATM cells detected by the peer G.Bond/ATM "The number of lost ATM cells detected by the peer G.Bond/ATM
port in the receive direction, e.g. downstream direction for a port in the receive direction, e.g. downstream direction for a
GBS-C port. GBS-C port.
This object is read only for the GBS-C ports and irrelevant This object is irrelevant for the GBS-R ports - an attempt to
for the GBS-R ports. read it MUST be rejected (in case of SNMP with the error
inconsistentValue).
Discontinuities in the value of this counter can occur at Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other times re-initialization of the management system, and at other times
as indicated by the value of ifCounterDiscontinuityTime, as indicated by the value of ifCounterDiscontinuityTime,
defined in IF-MIB. defined in IF-MIB.
This object maps to TR-159 attribute aIMAPeerRxLostCells." This object maps to TR-159 attribute aIMAPeerRxLostCells."
REFERENCE REFERENCE
"[TR-159] 5.5.2.1; [G.998.1] 11.4.2 (4)" "[TR-159] 5.5.2.1; [G.998.1] 11.4.2 (4)"
::= { gBondAtmPortStatusEntry 2 } ::= { gBondAtmPortStatEntry 2 }
gBondAtmMaxUpDiffDelay OBJECT-TYPE gBondAtmPortStatMaxUpDiffDelay OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "0.1 ms" UNITS "0.1 ms"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Current maximum upstream differential delay between all "Current maximum upstream differential delay between all
operational BCEs in the G.Bond/ATM bonding group, measured in operational BCEs in the G.Bond/ATM bonding group, measured in
units of 0.1ms. units of 0.1 ms.
This object is read-only for the GBS-C and irrelevant for This object is read-only for the GBS-C ports.
the GBS-R ports. It is irrelevant for the GBS-R ports - an attempt to read this
object MUST be rejected (in case of SNMP with the error
inconsistentValue).
This object maps to TR-159 attribute aIMAMaxUpDiffDelay." This object maps to TR-159 attribute aIMAMaxUpDiffDelay."
REFERENCE REFERENCE
"[TR-159] 5.5.2.3" "[TR-159] 5.5.2.3"
::= { gBondAtmPortStatusEntry 3 } ::= { gBondAtmPortStatEntry 3 }
gBondAtmMaxDnDiffDelay OBJECT-TYPE gBondAtmPortStatMaxDnDiffDelay OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "0.1 ms" UNITS "0.1 ms"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Current maximum downstream differential delay between all "Current maximum downstream differential delay between all
operational BCEs in the G.Bond/ATM bonding group, measured in operational BCEs in the G.Bond/ATM bonding group, measured in
units of 0.1ms. units of 0.1 ms.
This object is read-only for the GBS-C and irrelevant for This object is read-only for the GBS-C ports.
the GBS-R ports. It is irrelevant for the GBS-R ports - an attempt to read this
object MUST be rejected (in case of SNMP with the error
inconsistentValue).
This object maps to TR-159 attribute aIMAMaxDownDiffDelay." This object maps to TR-159 attribute aIMAMaxDownDiffDelay."
REFERENCE REFERENCE
"[TR-159] 5.5.2.4" "[TR-159] 5.5.2.4"
::= { gBondAtmPortStatusEntry 4 }
::= { gBondAtmPortStatEntry 4 }
------------------------------- -------------------------------
-- Performance Monitoring group -- Performance Monitoring group
------------------------------- -------------------------------
gBondAtmPM OBJECT IDENTIFIER ::= { gBondAtmPort 3 } gBondAtmPM OBJECT IDENTIFIER ::= { gBondAtmPort 3 }
gBondAtmPortPerfCurrTable OBJECT-TYPE gBondAtmPortPmCurTable OBJECT-TYPE
SYNTAX SEQUENCE OF GBondAtmPortPerfCurrEntry SYNTAX SEQUENCE OF GBondAtmPortPmCurEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table contains current Performance Monitoring information "This table contains current Performance Monitoring information
for a G.Bond/ATM port. This table contains live data from the for a G.Bond/ATM port. This table contains live data from the
equipment and as such is NOT persistent." equipment and as such is NOT persistent."
::= { gBondAtmPM 1 } ::= { gBondAtmPM 1 }
gBondAtmPortPerfCurrEntry OBJECT-TYPE gBondAtmPortPmCurEntry OBJECT-TYPE
SYNTAX GBondAtmPortPerfCurrEntry SYNTAX GBondAtmPortPmCurEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry in the G.Bond/ATM Port PM table. "An entry in the G.Bond/ATM Port PM table.
Each entry represents a G.Bond/ATM port indexed by the Each entry represents a G.Bond/ATM port indexed by the
ifIndex." ifIndex."
INDEX { ifIndex } INDEX { ifIndex }
::= { gBondAtmPortPerfCurrTable 1 } ::= { gBondAtmPortPmCurTable 1 }
GBondAtmPortPerfCurrEntry ::= GBondAtmPortPmCurEntry ::=
SEQUENCE { SEQUENCE {
gBondAtmPortPerf15MinValidIntervals HCPerfValidIntervals, gBondAtmPortPmCur15MinValidIntervals HCPerfValidIntervals,
gBondAtmPortPerf15MinInvalidIntervals HCPerfInvalidIntervals, gBondAtmPortPmCur15MinInvalidIntervals HCPerfInvalidIntervals,
gBondAtmPortPerfCurr15MinTimeElapsed HCPerfTimeElapsed, gBondAtmPortPmCur15MinTimeElapsed HCPerfTimeElapsed,
gBondAtmPortPerfCurr15MinRxLostCells HCPerfCurrentCount, gBondAtmPortPmCur15MinRxLostCells HCPerfCurrentCount,
gBondAtmPortPerfCurr15MinTxLostCells HCPerfCurrentCount, gBondAtmPortPmCur15MinTxLostCells HCPerfCurrentCount,
gBondAtmPortPerfCurr15MinUpDiffDelay HCPerfCurrentCount, gBondAtmPortPmCur15MinUpDiffDelay HCPerfCurrentCount,
gBondAtmPortPerfCurr15MinDnDiffDelay HCPerfCurrentCount, gBondAtmPortPmCur15MinDnDiffDelay HCPerfCurrentCount,
gBondAtmPortPerf1DayValidIntervals Unsigned32, gBondAtmPortPmCur1DayValidIntervals Unsigned32,
gBondAtmPortPerf1DayInvalidIntervals Unsigned32, gBondAtmPortPmCur1DayInvalidIntervals Unsigned32,
gBondAtmPortPerfCurr1DayTimeElapsed HCPerfTimeElapsed, gBondAtmPortPmCur1DayTimeElapsed HCPerfTimeElapsed,
gBondAtmPortPerfCurr1DayRxLostCells HCPerfCurrentCount, gBondAtmPortPmCur1DayRxLostCells HCPerfCurrentCount,
gBondAtmPortPerfCurr1DayTxLostCells HCPerfCurrentCount, gBondAtmPortPmCur1DayTxLostCells HCPerfCurrentCount,
gBondAtmPortPerfCurr1DayUpDiffDelay HCPerfCurrentCount, gBondAtmPortPmCur1DayUpDiffDelay HCPerfCurrentCount,
gBondAtmPortPerfCurr1DayDnDiffDelay HCPerfCurrentCount gBondAtmPortPmCur1DayDnDiffDelay HCPerfCurrentCount
} }
gBondAtmPortPerf15MinValidIntervals OBJECT-TYPE gBondAtmPortPmCur15MinValidIntervals OBJECT-TYPE
SYNTAX HCPerfValidIntervals SYNTAX HCPerfValidIntervals
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only number of 15-minute intervals for which the "A read-only number of 15-minute intervals for which the
performance data was collected. The value of this object will performance data was collected. The value of this object will
be 96 or the maximum number of 15-minute history intervals be 96 or the maximum number of 15-minute history intervals
collected by the implementation unless the measurement was collected by the implementation unless the measurement was
(re-)started recently, in which case the value will be the (re-)started recently, in which case the value will be the
number of complete 15 minutes intervals for which there are at number of complete 15 minutes intervals for which there are at
least some data. least some data.
In certain cases it is possible that some intervals are In certain cases it is possible that some intervals are
unavailable. In this case, this object reports the maximum unavailable. In this case, this object reports the maximum
interval number for which data is available. interval number for which data is available.
This object partially maps to the TR-159 attribute This object partially maps to the TR-159 attribute
aGroupPerf15MinValidIntervals." aGroupPerf15MinValidIntervals."
REFERENCE REFERENCE
"[TR-159] 5.5.1.32" "[TR-159] 5.5.1.32"
::= { gBondAtmPortPerfCurrEntry 1 } ::= { gBondAtmPortPmCurEntry 1 }
gBondAtmPortPerf15MinInvalidIntervals OBJECT-TYPE gBondAtmPortPmCur15MinInvalidIntervals OBJECT-TYPE
SYNTAX HCPerfInvalidIntervals SYNTAX HCPerfInvalidIntervals
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only number of 15-minute intervals for which the "A read-only number of 15-minute intervals for which the
performance data was not always available. The value will performance data was not always available. The value will
typically be zero except in cases where the data for some typically be zero except in cases where the data for some
intervals are not available. intervals are not available.
This object partially maps to the TR-159 attribute This object partially maps to the TR-159 attribute
aGroupPerf15MinInvalidIntervals." aGroupPerf15MinInvalidIntervals."
REFERENCE REFERENCE
"[TR-159] 5.5.1.33" "[TR-159] 5.5.1.33"
::= { gBondAtmPortPerfCurrEntry 2 } ::= { gBondAtmPortPmCurEntry 2 }
gBondAtmPortPerfCurr15MinTimeElapsed OBJECT-TYPE gBondAtmPortPmCur15MinTimeElapsed OBJECT-TYPE
SYNTAX HCPerfTimeElapsed SYNTAX HCPerfTimeElapsed
UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only count of seconds that have elapsed since the "A read-only count of seconds that have elapsed since the
beginning of the current 15-minute performance interval. beginning of the current 15-minute performance interval.
This object partially maps to the TR-159 attribute This object partially maps to the TR-159 attribute
aGroupPerfCurr15MinTimeElapsed." aGroupPerfCurr15MinTimeElapsed."
REFERENCE REFERENCE
"[TR-159] 5.5.1.34" "[TR-159] 5.5.1.34"
::= { gBondAtmPortPerfCurrEntry 3 } ::= { gBondAtmPortPmCurEntry 3 }
gBondAtmPortPerfCurr15MinRxLostCells OBJECT-TYPE gBondAtmPortPmCur15MinRxLostCells OBJECT-TYPE
SYNTAX HCPerfCurrentCount SYNTAX HCPerfCurrentCount
UNITS "cells"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only count of lost ATM cells detected by a G.Bond/ATM "A read-only count of lost ATM cells detected by a G.Bond/ATM
port (e.g. GBS-C) in the receive direction, during the current port (e.g. GBS-C) in the receive direction, during the current
15-minute performance history interval. 15-minute performance history interval.
Note that the total number of lost ATM cells is indicated by the Note that the total number of lost ATM cells is indicated by the
gBondAtmRxLostCells object. gBondAtmPortStatRxLostCells object.
This object is inhibited during Severely Errored Seconds (SES) This object is inhibited during Severely Errored Seconds (SES)
or Unavailable Seconds (UAS)." or Unavailable Seconds (UAS)."
REFERENCE REFERENCE
"[TR-159] 5.5.2.1" "[TR-159] 5.5.2.1"
::= { gBondAtmPortPerfCurrEntry 4} ::= { gBondAtmPortPmCurEntry 4}
gBondAtmPortPerfCurr15MinTxLostCells OBJECT-TYPE gBondAtmPortPmCur15MinTxLostCells OBJECT-TYPE
SYNTAX HCPerfCurrentCount SYNTAX HCPerfCurrentCount
UNITS "cells"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only count of lost ATM cells detected by the peer "A read-only count of lost ATM cells detected by the peer
G.Bond/ATM port (e.g. by GBS-R for GBS-C), during the current G.Bond/ATM port (e.g. by GBS-R for GBS-C), during the current
15-minute performance history interval. 15-minute performance history interval.
Note that the total number of lost ATM cells is indicated by the Note that the total number of lost ATM cells is indicated by the
gBondAtmTxLostCells object. gBondAtmPortStatTxLostCells object.
This object is inhibited during Unavailable Seconds (UAS)." This object is inhibited during Unavailable Seconds (UAS)."
REFERENCE REFERENCE
"[TR-159] 5.5.2.2" "[TR-159] 5.5.2.2"
::= { gBondAtmPortPerfCurrEntry 5} ::= { gBondAtmPortPmCurEntry 5}
gBondAtmPortPerfCurr15MinUpDiffDelay OBJECT-TYPE gBondAtmPortPmCur15MinUpDiffDelay OBJECT-TYPE
SYNTAX HCPerfCurrentCount SYNTAX HCPerfCurrentCount
UNITS "0.1 ms"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only value specifying maximum upstream differential "A read-only value specifying maximum upstream differential
delay between all operational BCEs in the GBS-C, measured in delay between all operational BCEs in the GBS-C, measured in
units of 0.1ms, during the current 15-minute performance units of 0.1 ms, during the current 15-minute performance
interval. interval.
Note that the current max upstream differential delay is Note that the current max upstream differential delay is
indicated by the gBondAtmMaxUpDiffDelay object. indicated by the gBondAtmPortStatMaxUpDiffDelay object.
This object is inhibited during Unavailable Seconds (UAS)." This object is inhibited during Unavailable Seconds (UAS)."
REFERENCE REFERENCE
"[TR-159] 5.5.2.3" "[TR-159] 5.5.2.3"
::= { gBondAtmPortPerfCurrEntry 6} ::= { gBondAtmPortPmCurEntry 6}
gBondAtmPortPerfCurr15MinDnDiffDelay OBJECT-TYPE gBondAtmPortPmCur15MinDnDiffDelay OBJECT-TYPE
SYNTAX HCPerfCurrentCount SYNTAX HCPerfCurrentCount
UNITS "0.1 ms"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only value specifying maximum downstream differential "A read-only value specifying maximum downstream differential
delay between all operational BCEs in the GBS-C (as perceived delay between all operational BCEs in the GBS-C (as perceived
by GBS-R), measured in units of 0.1ms, during the current by GBS-R), measured in units of 0.1 ms, during the current
15-minute performance history interval. 15-minute performance history interval.
Note that the current max downstream differential delay is Note that the current max downstream differential delay is
indicated by the gBondAtmMaxDnDiffDelay object. indicated by the gBondAtmPortStatMaxDnDiffDelay object.
This object is inhibited during Unavailable Seconds (UAS)." This object is inhibited during Unavailable Seconds (UAS)."
REFERENCE REFERENCE
"[TR-159] 5.5.2.4" "[TR-159] 5.5.2.4"
::= { gBondAtmPortPerfCurrEntry 7} ::= { gBondAtmPortPmCurEntry 7}
gBondAtmPortPerf1DayValidIntervals OBJECT-TYPE gBondAtmPortPmCur1DayValidIntervals OBJECT-TYPE
SYNTAX Unsigned32 (0..7) SYNTAX Unsigned32 (0..7)
UNITS "days"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only number of 1-day intervals for which data was "A read-only number of 1-day intervals for which data was
collected. The value of this object will be 7 or the maximum collected. The value of this object will be 7 or the maximum
number of 1-day history intervals collected by the number of 1-day history intervals collected by the
implementation unless the measurement was (re-)started recently, implementation unless the measurement was (re-)started recently,
in which case the value will be the number of complete 1-day in which case the value will be the number of complete 1-day
intervals for which there are at least some data. intervals for which there are at least some data.
In certain cases it is possible that some intervals are In certain cases it is possible that some intervals are
unavailable. In this case, this object reports the maximum unavailable. In this case, this object reports the maximum
interval number for which data is available." interval number for which data is available."
REFERENCE REFERENCE
"[TR-159] 5.5.1.45" "[TR-159] 5.5.1.45"
::= { gBondAtmPortPerfCurrEntry 8 }
gBondAtmPortPerf1DayInvalidIntervals OBJECT-TYPE ::= { gBondAtmPortPmCurEntry 8 }
gBondAtmPortPmCur1DayInvalidIntervals OBJECT-TYPE
SYNTAX Unsigned32 (0..7) SYNTAX Unsigned32 (0..7)
UNITS "days"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only number of 1-day intervals for which data was "A read-only number of 1-day intervals for which data was
not always available. The value will typically be zero except in not always available. The value will typically be zero except in
cases where the data for some intervals are not available." cases where the data for some intervals are not available."
REFERENCE REFERENCE
"[TR-159] 5.5.1.46" "[TR-159] 5.5.1.46"
::= { gBondAtmPortPerfCurrEntry 9 } ::= { gBondAtmPortPmCurEntry 9 }
gBondAtmPortPerfCurr1DayTimeElapsed OBJECT-TYPE gBondAtmPortPmCur1DayTimeElapsed OBJECT-TYPE
SYNTAX HCPerfTimeElapsed SYNTAX HCPerfTimeElapsed
UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only count of seconds that have elapsed since the "A read-only count of seconds that have elapsed since the
beginning of the current 1-day performance interval." beginning of the current 1-day performance interval."
REFERENCE REFERENCE
"[TR-159] 5.5.1.47" "[TR-159] 5.5.1.47"
::= { gBondAtmPortPerfCurrEntry 10 } ::= { gBondAtmPortPmCurEntry 10 }
gBondAtmPortPerfCurr1DayRxLostCells OBJECT-TYPE gBondAtmPortPmCur1DayRxLostCells OBJECT-TYPE
SYNTAX HCPerfCurrentCount SYNTAX HCPerfCurrentCount
UNITS "cells"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only count of lost ATM cells detected by the G.Bond/ATM "A read-only count of lost ATM cells detected by the G.Bond/ATM
port (e.g. GBS-C), during the current 1-day performance port (e.g. GBS-C), during the current 1-day performance
interval. interval.
This object is inhibited during Severely Errored Seconds (SES) This object is inhibited during Severely Errored Seconds (SES)
and Unavailable Seconds (UAS)." and Unavailable Seconds (UAS)."
::= { gBondAtmPortPerfCurrEntry 11 } ::= { gBondAtmPortPmCurEntry 11 }
gBondAtmPortPerfCurr1DayTxLostCells OBJECT-TYPE gBondAtmPortPmCur1DayTxLostCells OBJECT-TYPE
SYNTAX HCPerfCurrentCount SYNTAX HCPerfCurrentCount
UNITS "cells"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only count of lost ATM cells detected by the peer "A read-only count of lost ATM cells detected by the peer
G.Bond/ATM port (e.g. by GBS-R for GBS-C), during the current G.Bond/ATM port (e.g. by GBS-R for GBS-C), during the current
1-day performance history interval. 1-day performance history interval.
This object is inhibited during Unavailable Seconds (UAS)." This object is inhibited during Unavailable Seconds (UAS)."
::= { gBondAtmPortPerfCurrEntry 12 } ::= { gBondAtmPortPmCurEntry 12 }
gBondAtmPortPerfCurr1DayUpDiffDelay OBJECT-TYPE gBondAtmPortPmCur1DayUpDiffDelay OBJECT-TYPE
SYNTAX HCPerfCurrentCount SYNTAX HCPerfCurrentCount
UNITS "0.1 ms"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only value specifying maximum upstream differential "A read-only value specifying maximum upstream differential
delay between all operational BCEs in the GBS-C, measured in delay between all operational BCEs in the GBS-C, measured in
units of 0.1ms, during the current 1-day performance units of 0.1 ms, during the current 1-day performance
interval. interval.
This object is inhibited during Unavailable Seconds (UAS)." This object is inhibited during Unavailable Seconds (UAS)."
::= { gBondAtmPortPerfCurrEntry 13 } ::= { gBondAtmPortPmCurEntry 13 }
gBondAtmPortPerfCurr1DayDnDiffDelay OBJECT-TYPE gBondAtmPortPmCur1DayDnDiffDelay OBJECT-TYPE
SYNTAX HCPerfCurrentCount SYNTAX HCPerfCurrentCount
UNITS "0.1 ms"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only value specifying maximum downstream differential "A read-only value specifying maximum downstream differential
delay between all operational BCEs in the GBS-C, measured in delay between all operational BCEs in the GBS-C, measured in
units of 0.1ms, during the current 1-day performance units of 0.1 ms, during the current 1-day performance
interval. interval.
This object is inhibited during Unavailable Seconds (UAS)." This object is inhibited during Unavailable Seconds (UAS)."
::= { gBondAtmPortPerfCurrEntry 14 } ::= { gBondAtmPortPmCurEntry 14 }
-- Port PM history: 15-min buckets -- Port PM history: 15-min buckets
gBondAtmPortPerf15MinTable OBJECT-TYPE gBondAtmPortPm15MinTable OBJECT-TYPE
SYNTAX SEQUENCE OF GBondAtmPortPerf15MinEntry SYNTAX SEQUENCE OF GBondAtmPortPm15MinEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table contains historical 15-minute buckets of Performance "This table contains historical 15-minute buckets of Performance
Monitoring information for a G.Bond/ATM port (a row for each Monitoring information for a G.Bond/ATM port (a row for each
15-minute interval, up to 96 intervals). 15-minute interval, up to 96 intervals).
Entries in this table MUST be maintained in a persistent manner." Entries in this table MUST be maintained in a persistent manner."
::= { gBondAtmPM 2 } ::= { gBondAtmPM 2 }
gBondAtmPortPerf15MinEntry OBJECT-TYPE gBondAtmPortPm15MinEntry OBJECT-TYPE
SYNTAX GBondAtmPortPerf15MinEntry SYNTAX GBondAtmPortPm15MinEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry in the G.Bond/ATM Port historical 15-minute PM table. "An entry in the G.Bond/ATM Port historical 15-minute PM table.
Each entry represents performance monitoring data for a Each entry represents performance monitoring data for a
G.Bond/ATM port, indexed by ifIndex, collected during a G.Bond/ATM port, indexed by ifIndex, collected during a
particular 15-minute interval, indexed by particular 15-minute interval, indexed by
gBondAtmPortPerf15MinIntervalIndex." gBondAtmPortPm15MinIntervalIndex."
INDEX { ifIndex, gBondAtmPortPerf15MinIntervalIndex } INDEX { ifIndex, gBondAtmPortPm15MinIntervalIndex }
::= { gBondAtmPortPerf15MinTable 1 } ::= { gBondAtmPortPm15MinTable 1 }
GBondAtmPortPerf15MinEntry ::= GBondAtmPortPm15MinEntry ::=
SEQUENCE { SEQUENCE {
gBondAtmPortPerf15MinIntervalIndex Unsigned32, gBondAtmPortPm15MinIntervalIndex Unsigned32,
gBondAtmPortPerf15MinIntervalMoniTime HCPerfTimeElapsed, gBondAtmPortPm15MinIntervalMoniTime HCPerfTimeElapsed,
gBondAtmPortPerf15MinIntervalRxLostCells HCPerfIntervalCount, gBondAtmPortPm15MinIntervalRxLostCells HCPerfIntervalCount,
gBondAtmPortPerf15MinIntervalTxLostCells HCPerfIntervalCount, gBondAtmPortPm15MinIntervalTxLostCells HCPerfIntervalCount,
gBondAtmPortPerf15MinIntervalUpDiffDelay HCPerfIntervalCount, gBondAtmPortPm15MinIntervalUpDiffDelay HCPerfIntervalCount,
gBondAtmPortPerf15MinIntervalDnDiffDelay HCPerfIntervalCount, gBondAtmPortPm15MinIntervalDnDiffDelay HCPerfIntervalCount,
gBondAtmPortPerf15MinIntervalValid TruthValue gBondAtmPortPm15MinIntervalValid TruthValue
} }
gBondAtmPortPerf15MinIntervalIndex OBJECT-TYPE gBondAtmPortPm15MinIntervalIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..96) SYNTAX Unsigned32 (1..96)
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Performance Data Interval number. 1 is the most recent previous "Performance Data Interval number. 1 is the most recent previous
interval; interval 96 is 24 hours ago. interval; interval 96 is 24 hours ago.
Intervals 2..96 are OPTIONAL. Intervals 2..96 are OPTIONAL.
This object partially maps to the TR-159 attribute This object partially maps to the TR-159 attribute
aGroupPerf15MinIntervalNumber." aGroupPerf15MinIntervalNumber."
REFERENCE REFERENCE
"[TR-159] 5.5.1.57" "[TR-159] 5.5.1.57"
::= { gBondAtmPortPerf15MinEntry 1 } ::= { gBondAtmPortPm15MinEntry 1 }
gBondAtmPortPerf15MinIntervalMoniTime OBJECT-TYPE gBondAtmPortPm15MinIntervalMoniTime OBJECT-TYPE
SYNTAX HCPerfTimeElapsed SYNTAX HCPerfTimeElapsed
UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only count of seconds over which the performance data "A read-only count of seconds over which the performance data
was actually monitored. This value will be the same as the was actually monitored. This value will be the same as the
interval duration (900 seconds), except in a situation where interval duration (900 seconds), except in a situation where
performance data could not be collected for any reason." performance data could not be collected for any reason."
::= { gBondAtmPortPerf15MinEntry 2 }
gBondAtmPortPerf15MinIntervalRxLostCells OBJECT-TYPE ::= { gBondAtmPortPm15MinEntry 2 }
gBondAtmPortPm15MinIntervalRxLostCells OBJECT-TYPE
SYNTAX HCPerfIntervalCount SYNTAX HCPerfIntervalCount
UNITS "cells"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only count of lost ATM cells detected by a G.Bond/ATM "A read-only count of lost ATM cells detected by a G.Bond/ATM
port (e.g. GBS-C) in the receive direction, during the port (e.g. GBS-C) in the receive direction, during the
15-minute performance history interval. 15-minute performance history interval.
Note that the total number of lost ATM cells is indicated by the Note that the total number of lost ATM cells is indicated by the
gBondAtmRxLostCells object. gBondAtmPortStatRxLostCells object.
This object is inhibited during Severely Errored Seconds (SES) This object is inhibited during Severely Errored Seconds (SES)
or Unavailable Seconds (UAS)." or Unavailable Seconds (UAS)."
REFERENCE REFERENCE
"[TR-159] 5.5.2.1" "[TR-159] 5.5.2.1"
::= { gBondAtmPortPerf15MinEntry 3 } ::= { gBondAtmPortPm15MinEntry 3 }
gBondAtmPortPerf15MinIntervalTxLostCells OBJECT-TYPE gBondAtmPortPm15MinIntervalTxLostCells OBJECT-TYPE
SYNTAX HCPerfIntervalCount SYNTAX HCPerfIntervalCount
UNITS "cells"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only count of lost ATM cells detected by the peer "A read-only count of lost ATM cells detected by the peer
G.Bond/ATM port (e.g. by GBS-R for GBS-C), during the 15-minute G.Bond/ATM port (e.g. by GBS-R for GBS-C), during the 15-minute
performance history interval. performance history interval.
Note that the total number of lost ATM cells is indicated by the Note that the total number of lost ATM cells is indicated by the
gBondAtmTxLostCells object. gBondAtmPortStatTxLostCells object.
This object is inhibited during Unavailable Seconds (UAS)." This object is inhibited during Unavailable Seconds (UAS)."
REFERENCE REFERENCE
"[TR-159] 5.5.2.2" "[TR-159] 5.5.2.2"
::= { gBondAtmPortPerf15MinEntry 4 } ::= { gBondAtmPortPm15MinEntry 4 }
gBondAtmPortPerf15MinIntervalUpDiffDelay OBJECT-TYPE gBondAtmPortPm15MinIntervalUpDiffDelay OBJECT-TYPE
SYNTAX HCPerfIntervalCount SYNTAX HCPerfIntervalCount
UNITS "0.1 ms"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only value specifying maximum upstream differential "A read-only value specifying maximum upstream differential
delay between all operational BCEs in the GBS, measured in delay between all operational BCEs in the GBS, measured in
units of 0.1ms, during the 15-minute performance history units of 0.1 ms, during the 15-minute performance history
interval. interval.
Note that the current max upstream differential delay is Note that the current max upstream differential delay is
indicated by the gBondAtmMaxUpDiffDelay object. indicated by the gBondAtmPortStatMaxUpDiffDelay object.
This object is inhibited during Unavailable Seconds (UAS)." This object is inhibited during Unavailable Seconds (UAS)."
REFERENCE REFERENCE
"[TR-159] 5.5.2.3" "[TR-159] 5.5.2.3"
::= { gBondAtmPortPerf15MinEntry 5 } ::= { gBondAtmPortPm15MinEntry 5 }
gBondAtmPortPerf15MinIntervalDnDiffDelay OBJECT-TYPE gBondAtmPortPm15MinIntervalDnDiffDelay OBJECT-TYPE
SYNTAX HCPerfIntervalCount SYNTAX HCPerfIntervalCount
UNITS "0.1 ms"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only value specifying maximum downstream differential "A read-only value specifying maximum downstream differential
delay between all operational BCEs in the GBS, as perceived by delay between all operational BCEs in the GBS, as perceived by
its peer port, measured in units of 0.1ms, during the its peer port, measured in units of 0.1 ms, during the
15-minute performance history interval. 15-minute performance history interval.
Note that the current max upstream differential delay is Note that the current max upstream differential delay is
indicated by the gBondAtmMaxDnDiffDelay object. indicated by the gBondAtmPortStatMaxDnDiffDelay object.
This object is inhibited during Unavailable Seconds (UAS)." This object is inhibited during Unavailable Seconds (UAS)."
REFERENCE REFERENCE
"[TR-159] 5.5.2.4" "[TR-159] 5.5.2.4"
::= { gBondAtmPortPerf15MinEntry 6 } ::= { gBondAtmPortPm15MinEntry 6 }
gBondAtmPortPerf15MinIntervalValid OBJECT-TYPE gBondAtmPortPm15MinIntervalValid OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only object indicating whether or not this history "A read-only object indicating whether or not this history
bucket contains valid data. Valid bucket is reported as true(1) bucket contains valid data. Valid bucket is reported as true(1)
and invalid bucket as false(2). and invalid bucket as false(2).
If this history bucket is invalid the BTU MUST NOT produce If this history bucket is invalid the BTU MUST NOT produce
notifications based upon the value of the counters in this notifications based upon the value of the counters in this
bucket. bucket.
Note that an implementation may decide not to store invalid Note that an implementation may decide not to store invalid
history buckets in its data base. In such case this object is history buckets in its data base. In such case this object is
not required as only valid history buckets are available while not required as only valid history buckets are available while
invalid history buckets are simply not in the data base. invalid history buckets are simply not in the data base.
This object partially maps to the TR-159 attribute This object partially maps to the TR-159 attribute
aGroupPerf15MinIntervalValid." aGroupPerf15MinIntervalValid."
REFERENCE REFERENCE
"[TR-159] 5.5.1.58" "[TR-159] 5.5.1.58"
::= { gBondAtmPortPerf15MinEntry 7 } ::= { gBondAtmPortPm15MinEntry 7 }
-- Port PM history: 1-day buckets -- Port PM history: 1-day buckets
gBondAtmPortPerf1DayTable OBJECT-TYPE gBondAtmPortPm1DayTable OBJECT-TYPE
SYNTAX SEQUENCE OF GBondAtmPortPerf1DayEntry SYNTAX SEQUENCE OF GBondAtmPortPm1DayEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table contains historical 1-day buckets of Performance "This table contains historical 1-day buckets of Performance
Monitoring information for a G.Bond/ATM port (a row for each Monitoring information for a G.Bond/ATM port (a row for each
1-day interval, up to 7 intervals). 1-day interval, up to 7 intervals).
Entries in this table MUST be maintained in a persistent manner." Entries in this table MUST be maintained in a persistent manner."
::= { gBondAtmPM 3 } ::= { gBondAtmPM 3 }
gBondAtmPortPerf1DayEntry OBJECT-TYPE gBondAtmPortPm1DayEntry OBJECT-TYPE
SYNTAX GBondAtmPortPerf1DayEntry SYNTAX GBondAtmPortPm1DayEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry in the G.Bond/ATM port historical 1-day PM table. "An entry in the G.Bond/ATM port historical 1-day PM table.
Each entry represents performance monitoring data for such port, Each entry represents performance monitoring data for such port,
indexed by ifIndex, collected during a particular 1-day indexed by ifIndex, collected during a particular 1-day
interval, indexed by gBondAtmPortPerf1DayIntervalIndex." interval, indexed by gBondAtmPortPm1DayIntervalIndex."
INDEX { ifIndex, gBondAtmPortPerf1DayIntervalIndex } INDEX { ifIndex, gBondAtmPortPm1DayIntervalIndex }
::= { gBondAtmPortPerf1DayTable 1 } ::= { gBondAtmPortPm1DayTable 1 }
GBondAtmPortPerf1DayEntry ::= GBondAtmPortPm1DayEntry ::=
SEQUENCE { SEQUENCE {
gBondAtmPortPerf1DayIntervalIndex Unsigned32, gBondAtmPortPm1DayIntervalIndex Unsigned32,
gBondAtmPortPerf1DayIntervalMoniTime HCPerfTimeElapsed, gBondAtmPortPm1DayIntervalMoniTime HCPerfTimeElapsed,
gBondAtmPortPerf1DayIntervalRxLostCells HCPerfIntervalCount, gBondAtmPortPm1DayIntervalRxLostCells HCPerfIntervalCount,
gBondAtmPortPerf1DayIntervalTxLostCells HCPerfIntervalCount, gBondAtmPortPm1DayIntervalTxLostCells HCPerfIntervalCount,
gBondAtmPortPerf1DayIntervalUpDiffDelay HCPerfIntervalCount, gBondAtmPortPm1DayIntervalUpDiffDelay HCPerfIntervalCount,
gBondAtmPortPerf1DayIntervalDnDiffDelay HCPerfIntervalCount, gBondAtmPortPm1DayIntervalDnDiffDelay HCPerfIntervalCount,
gBondAtmPortPerf1DayIntervalValid TruthValue gBondAtmPortPm1DayIntervalValid TruthValue
} }
gBondAtmPortPerf1DayIntervalIndex OBJECT-TYPE gBondAtmPortPm1DayIntervalIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..7) SYNTAX Unsigned32 (1..7)
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Performance Data Interval number. 1 is the most recent previous "Performance Data Interval number. 1 is the most recent previous
interval; interval 7 is 24 hours ago. interval; interval 7 is 24 hours ago.
Intervals 2..7 are OPTIONAL. Intervals 2..7 are OPTIONAL.
This object partially maps to the TR-159 attribute This object partially maps to the TR-159 attribute
aGroupPerf1DayIntervalNumber." aGroupPerf1DayIntervalNumber."
REFERENCE REFERENCE
"[TR-159] 5.5.1.62" "[TR-159] 5.5.1.62"
::= { gBondAtmPortPerf1DayEntry 1 } ::= { gBondAtmPortPm1DayEntry 1 }
gBondAtmPortPerf1DayIntervalMoniTime OBJECT-TYPE gBondAtmPortPm1DayIntervalMoniTime OBJECT-TYPE
SYNTAX HCPerfTimeElapsed SYNTAX HCPerfTimeElapsed
UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only count of seconds over which the performance data "A count of seconds over which the performance data was actually
was actually monitored. This value will be the same as the monitored. This value will be the same as the interval duration
interval duration (86400 seconds), except in a situation where (86400 seconds), except in a situation where performance data
performance data could not be collected for any reason. could not be collected for any reason.
This object partially maps to the TR-159 attribute This object partially maps to the TR-159 attribute
aGroupPerf1DayIntervalMoniSecs." aGroupPerf1DayIntervalMoniSecs."
REFERENCE REFERENCE
"[TR-159] 5.5.1.64" "[TR-159] 5.5.1.64"
::= { gBondAtmPortPerf1DayEntry 2 } ::= { gBondAtmPortPm1DayEntry 2 }
gBondAtmPortPerf1DayIntervalRxLostCells OBJECT-TYPE gBondAtmPortPm1DayIntervalRxLostCells OBJECT-TYPE
SYNTAX HCPerfIntervalCount SYNTAX HCPerfIntervalCount
UNITS "cells"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only count of lost ATM cells detected by the G.Bond/ATM "A count of lost ATM cells detected by the G.Bond/ATM port
port (e.g. GBS-C), during the 1-day performance history interval. (e.g. GBS-C), during the 1-day performance history interval.
This object is inhibited during Severely Errored Seconds (SES) This object is inhibited during Severely Errored Seconds (SES)
and Unavailable Seconds (UAS)." and Unavailable Seconds (UAS)."
::= { gBondAtmPortPerf1DayEntry 3 } ::= { gBondAtmPortPm1DayEntry 3 }
gBondAtmPortPerf1DayIntervalTxLostCells OBJECT-TYPE gBondAtmPortPm1DayIntervalTxLostCells OBJECT-TYPE
SYNTAX HCPerfIntervalCount SYNTAX HCPerfIntervalCount
UNITS "cells"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only count of lost ATM cells detected by the peer "A count of lost ATM cells detected by the peer G.Bond/ATM port
G.Bond/ATM port (e.g. by GBS-R for GBS-C), during the 1-day (e.g. by GBS-R for GBS-C), during the 1-day performance history
performance history interval. interval.
This object is inhibited during Unavailable Seconds (UAS)." This object is inhibited during Unavailable Seconds (UAS)."
::= { gBondAtmPortPerf1DayEntry 4 } ::= { gBondAtmPortPm1DayEntry 4 }
gBondAtmPortPerf1DayIntervalUpDiffDelay OBJECT-TYPE gBondAtmPortPm1DayIntervalUpDiffDelay OBJECT-TYPE
SYNTAX HCPerfIntervalCount SYNTAX HCPerfIntervalCount
UNITS "0.1 ms"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only value specifying maximum upstream differential "A read-only value specifying maximum upstream differential
delay between all operational BCEs in the GBS-C, measured in delay between all operational BCEs in the GBS-C, measured in
units of 0.1ms, during the 1-day performance history interval. units of 0.1 ms, during the 1-day performance history interval.
This object is inhibited during Unavailable Seconds (UAS)." This object is inhibited during Unavailable Seconds (UAS)."
::= { gBondAtmPortPerf1DayEntry 5 } ::= { gBondAtmPortPm1DayEntry 5 }
gBondAtmPortPerf1DayIntervalDnDiffDelay OBJECT-TYPE gBondAtmPortPm1DayIntervalDnDiffDelay OBJECT-TYPE
SYNTAX HCPerfIntervalCount SYNTAX HCPerfIntervalCount
UNITS "0.1 ms"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only value specifying maximum downstream differential "A read-only value specifying maximum downstream differential
delay between all operational BCEs in the GBS-C, measured in delay between all operational BCEs in the GBS-C, measured in
units of 0.1ms, during the 1-day performance history interval. units of 0.1 ms, during the 1-day performance history interval.
This object is inhibited during Unavailable Seconds (UAS)." This object is inhibited during Unavailable Seconds (UAS)."
::= { gBondAtmPortPerf1DayEntry 6 } ::= { gBondAtmPortPm1DayEntry 6 }
gBondAtmPortPerf1DayIntervalValid OBJECT-TYPE gBondAtmPortPm1DayIntervalValid OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only object indicating whether or not this history "A read-only object indicating whether or not this history
bucket contains valid data. Valid bucket is reported as true(1) bucket contains valid data. Valid bucket is reported as true(1)
and invalid bucket as false(2). and invalid bucket as false(2).
If this history bucket is invalid the BTU MUST NOT produce If this history bucket is invalid the BTU MUST NOT produce
notifications based upon the value of the counters in this notifications based upon the value of the counters in this
bucket. bucket.
Note that an implementation may decide not to store invalid Note that an implementation may decide not to store invalid
history buckets in its data base. In such case this object is history buckets in its data base. In such case this object is
not required as only valid history buckets are available while not required as only valid history buckets are available while
invalid history buckets are simply not in the data base. invalid history buckets are simply not in the data base.
This object partially maps to the TR-159 attribute This object partially maps to the TR-159 attribute
aGroupPerf1DayIntervalValid." aGroupPerf1DayIntervalValid."
REFERENCE REFERENCE
"[TR-159] 5.5.1.63" "[TR-159] 5.5.1.63"
::= { gBondAtmPortPerf1DayEntry 7 } ::= { gBondAtmPortPm1DayEntry 7 }
-- --
-- Conformance Statements -- Conformance Statements
-- --
gBondAtmGroups OBJECT IDENTIFIER gBondAtmGroups OBJECT IDENTIFIER
::= { gBondAtmConformance 1 } ::= { gBondAtmConformance 1 }
gBondAtmCompliances OBJECT IDENTIFIER gBondAtmCompliances OBJECT IDENTIFIER
::= { gBondAtmConformance 2 } ::= { gBondAtmConformance 2 }
-- Object Groups -- Object Groups
gBondAtmBasicGroup OBJECT-GROUP gBondAtmBasicGroup OBJECT-GROUP
OBJECTS { OBJECTS {
gBondAtmRxLostCells, gBondAtmPortStatRxLostCells,
gBondAtmTxLostCells, gBondAtmPortStatTxLostCells,
gBondAtmMaxUpDiffDelay, gBondAtmPortStatMaxUpDiffDelay,
gBondAtmMaxDnDiffDelay gBondAtmPortStatMaxDnDiffDelay
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A collection of objects representing management information "A collection of objects representing management information
for a G.Bond/ATM port." for a G.Bond/ATM port."
::= { gBondAtmGroups 1 } ::= { gBondAtmGroups 1 }
gBondAtmAlarmConfGroup OBJECT-GROUP gBondAtmAlarmConfGroup OBJECT-GROUP
OBJECTS { OBJECTS {
gBondAtmUpDiffDelayTolerance, gBondAtmPortConfUpDiffDelayTolerance,
gBondAtmDnDiffDelayTolerance, gBondAtmPortConfDnDiffDelayTolerance,
gBondAtmDiffDelayToleranceExceededEnable gBondAtmPortConfDiffDelayToleranceExceededEnable
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A collection of objects required for configuration of alarm "A collection of objects required for configuration of alarm
thresholds and notifications in G.Bond/ATM ports." thresholds and notifications in G.Bond/ATM ports."
::= { gBondAtmGroups 2 } ::= { gBondAtmGroups 2 }
gBondAtmNotificationGroup NOTIFICATION-GROUP gBondAtmNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS { NOTIFICATIONS {
gBondAtmUpDiffDelayToleranceExceeded, gBondAtmUpDiffDelayToleranceExceeded,
gBondAtmDnDiffDelayToleranceExceeded gBondAtmDnDiffDelayToleranceExceeded
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This group supports notifications of significant conditions "This group supports notifications of significant conditions
associated with G.Bond/ATM ports." associated with G.Bond/ATM ports."
::= { gBondAtmGroups 3 } ::= { gBondAtmGroups 3 }
gBondAtmPerfCurrGroup OBJECT-GROUP gBondAtmPerfCurrGroup OBJECT-GROUP
OBJECTS { OBJECTS {
gBondAtmPortPerf15MinValidIntervals, gBondAtmPortPmCur15MinValidIntervals,
gBondAtmPortPerf15MinInvalidIntervals, gBondAtmPortPmCur15MinInvalidIntervals,
gBondAtmPortPerfCurr15MinTimeElapsed, gBondAtmPortPmCur15MinTimeElapsed,
gBondAtmPortPerfCurr15MinRxLostCells, gBondAtmPortPmCur15MinRxLostCells,
gBondAtmPortPerfCurr15MinTxLostCells, gBondAtmPortPmCur15MinTxLostCells,
gBondAtmPortPerfCurr15MinUpDiffDelay, gBondAtmPortPmCur15MinUpDiffDelay,
gBondAtmPortPerfCurr15MinDnDiffDelay, gBondAtmPortPmCur15MinDnDiffDelay,
gBondAtmPortPerf1DayValidIntervals, gBondAtmPortPmCur1DayValidIntervals,
gBondAtmPortPerf1DayInvalidIntervals, gBondAtmPortPmCur1DayInvalidIntervals,
gBondAtmPortPerfCurr1DayTimeElapsed, gBondAtmPortPmCur1DayTimeElapsed,
gBondAtmPortPerfCurr1DayRxLostCells, gBondAtmPortPmCur1DayRxLostCells,
gBondAtmPortPerfCurr1DayTxLostCells, gBondAtmPortPmCur1DayTxLostCells,
gBondAtmPortPerfCurr1DayUpDiffDelay, gBondAtmPortPmCur1DayUpDiffDelay,
gBondAtmPortPerfCurr1DayDnDiffDelay gBondAtmPortPmCur1DayDnDiffDelay
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A collection of objects supporting OPTIONAL current Performance "A collection of objects supporting OPTIONAL current Performance
Monitoring information for G.Bond/ATM ports." Monitoring information for G.Bond/ATM ports."
::= { gBondAtmGroups 4 } ::= { gBondAtmGroups 4 }
gBondAtmPerf15MinGroup OBJECT-GROUP gBondAtmPerf15MinGroup OBJECT-GROUP
OBJECTS { OBJECTS {
gBondAtmPortPerf15MinIntervalMoniTime, gBondAtmPortPm15MinIntervalMoniTime,
gBondAtmPortPerf15MinIntervalRxLostCells, gBondAtmPortPm15MinIntervalRxLostCells,
gBondAtmPortPerf15MinIntervalTxLostCells, gBondAtmPortPm15MinIntervalTxLostCells,
gBondAtmPortPerf15MinIntervalUpDiffDelay, gBondAtmPortPm15MinIntervalUpDiffDelay,
gBondAtmPortPerf15MinIntervalDnDiffDelay, gBondAtmPortPm15MinIntervalDnDiffDelay,
gBondAtmPortPerf15MinIntervalValid gBondAtmPortPm15MinIntervalValid
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A collection of objects supporting OPTIONAL historical "A collection of objects supporting OPTIONAL historical
Performance Monitoring information for G.Bond/ATM ports, during Performance Monitoring information for G.Bond/ATM ports, during
previous 15-minute intervals ." previous 15-minute intervals ."
::= { gBondAtmGroups 5 } ::= { gBondAtmGroups 5 }
gBondAtmPerf1DayGroup OBJECT-GROUP gBondAtmPerf1DayGroup OBJECT-GROUP
OBJECTS { OBJECTS {
gBondAtmPortPerf1DayIntervalMoniTime, gBondAtmPortPm1DayIntervalMoniTime,
gBondAtmPortPerf1DayIntervalRxLostCells, gBondAtmPortPm1DayIntervalRxLostCells,
gBondAtmPortPerf1DayIntervalTxLostCells, gBondAtmPortPm1DayIntervalTxLostCells,
gBondAtmPortPerf1DayIntervalUpDiffDelay, gBondAtmPortPm1DayIntervalUpDiffDelay,
gBondAtmPortPerf1DayIntervalDnDiffDelay, gBondAtmPortPm1DayIntervalDnDiffDelay,
gBondAtmPortPerf1DayIntervalValid gBondAtmPortPm1DayIntervalValid
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A collection of objects supporting OPTIONAL historical "A collection of objects supporting OPTIONAL historical
Performance Monitoring information for G.Bond/ATM ports, during Performance Monitoring information for G.Bond/ATM ports, during
previous 1-day intervals ." previous 1-day intervals ."
::= { gBondAtmGroups 6 } ::= { gBondAtmGroups 6 }
-- Compliance Statements -- Compliance Statements
skipping to change at page 29, line 12 skipping to change at page 30, line 4
"Support for this group is only required for implementations "Support for this group is only required for implementations
supporting historical Performance Monitoring." supporting historical Performance Monitoring."
GROUP gBondAtmPerf1DayGroup GROUP gBondAtmPerf1DayGroup
DESCRIPTION DESCRIPTION
"Support for this group is only required for implementations "Support for this group is only required for implementations
supporting 1-day historical Performance Monitoring." supporting 1-day historical Performance Monitoring."
::= { gBondAtmCompliances 1 } ::= { gBondAtmCompliances 1 }
END END
7. Security Considerations 7. Security Considerations
There is a number of managed objects defined in the GBOND-ATM-MIB There is a number of managed objects defined in this MIB module with
module that have a MAX-ACCESS clause of read-write. Writing to these a MAX-ACCESS clause of read-write. Such objects may be considered
objects can have potentially disruptive effects on network operation, sensitive or vulnerable in some network environments. The support
for example: for SET operations in a non-secure environment without proper
protection can have a negative effect on network operations. These
are the tables and objects and their sensitivity/vulnerability:
o Changing of gBondAtmPortConfTable configuration parameters MAY o Changing of gBondAtmPortConfTable configuration parameters MAY
lead to a potential Service Level Agreement (SLA) breach, for lead to a potential Service Level Agreement (SLA) breach, for
example if a traffic delay is increased as a result of the higher example if a traffic delay is increased as a result of the higher
delay tolerance (increased gBondAtmUpDiffDelayTolerance and/or delay tolerance (increased gBondAtmPortConfUpDiffDelayTolerance
gBondAtmDnDiffDelayTolerance), or the differential delay tolerance and/or gBondAtmPortConfDnDiffDelayTolerance), or the differential
notifications are disabled by manipulating the delay tolerance notifications are disabled by manipulating the
gBondAtmDiffDelayToleranceExceededEnable parameter. gBondAtmPortConfDiffDelayToleranceExceededEnable parameter.
The user of the GBOND-ATM-MIB module must therefore be aware that
support for SET operations in a non-secure environment without proper
protection can have a negative effect on network operations.
The readable objects in the GBOND-ATM-MIB module (i.e., those with Some of the readable objects in this MIB module (i.e., those with
MAX-ACCESS other than not-accessible) may be considered sensitive in MAX-ACCESS other than not-accessible) may be considered sensitive or
some environments since, collectively, they provide information about vulnerable in some network environments since, collectively, they
the performance of network interfaces and can reveal some aspects of provide information about the performance of network interfaces and
their configuration. can reveal some aspects of their configuration.
In such environments it is important to control also GET and NOTIFY It is thus important to control even GET and/or NOTIFY access to
access to these objects and possibly even to encrypt their values these objects and possibly even encrypt the values of these objects
when sending them over the network via SNMP. when sending them over the network via SNMP.
SNMP versions prior to SNMPv3 did not include adequate security. SNMP versions prior to SNMPv3 did not include adequate security.
Even if the network itself is secure (for example by using IPSec), Even if the network itself is secure (for example by using IPSec),
even then, there is no control as to who on the secure network is there is no control as to who on the secure network is allowed to
allowed to access and GET/SET (read/change/create/delete) the objects access and GET/SET (read/change/create/delete) the objects in this
in this MIB module. MIB module.
It is RECOMMENDED that implementers consider the security features as Implementations MUST provide the security features described by the
provided by the SNMPv3 framework (see [RFC3410], section 8), SNMPv3 framework (see [RFC3410]), including full support for
including full support for the SNMPv3 cryptographic mechanisms (for authentication and privacy via the User-based Security Model (USM)
authentication and privacy). [RFC3414] with the AES cipher algorithm [RFC3826]. Implementations
MAY also provide support for the Transport Security Model (TSM)
[RFC5591] in combination with a secure transport such as SSH
[RFC5592] or TLS/DTLS [RFC6353].
Further, deployment of SNMP versions prior to SNMPv3 is NOT Further, deployment of SNMP versions prior to SNMPv3 is NOT
RECOMMENDED. Instead, it is RECOMMENDED to deploy SNMPv3 and to RECOMMENDED. Instead, it is RECOMMENDED to deploy SNMPv3 and to
enable cryptographic security. It is then a customer/operator enable cryptographic security. It is then a customer/operator
responsibility to ensure that the SNMP entity giving access to an responsibility to ensure that the SNMP entity giving access to an
instance of this MIB module is properly configured to give access to instance of this MIB module is properly configured to give access to
the objects only to those principals (users) that have legitimate the objects only to those principals (users) that have legitimate
rights to indeed GET or SET (change/create/delete) them. rights to indeed GET or SET (change/create/delete) them.
8. IANA Considerations 8. IANA Considerations
skipping to change at page 30, line 33 skipping to change at page 31, line 25
10. References 10. References
10.1. Normative References 10.1. Normative References
[G.998.1] ITU-T, "ATM-based multi-pair bonding", [G.998.1] ITU-T, "ATM-based multi-pair bonding",
ITU-T Recommendation G.998.3, ITU-T Recommendation G.998.3,
January 2005. January 2005.
[I-D.ietf-adslmib-gbond-mib] Beili, E. and M. Morgenstern, "xDSL [I-D.ietf-adslmib-gbond-mib] Beili, E. and M. Morgenstern, "xDSL
multi-pair bonding (G.Bond) MIB", multi-pair bonding (G.Bond) MIB",
draft-ietf-adslmib-gbond-mib-07 (work draft-ietf-adslmib-gbond-mib-08 (work
in progress), May 2011. in progress), February 2012.
[RFC2119] Bradner, S., "Key words for use in RFCs [RFC2119] Bradner, S., "Key words for use in RFCs
to Indicate Requirement Levels", to Indicate Requirement Levels",
BCP 14, RFC 2119, March 1997. BCP 14, RFC 2119, March 1997.
[RFC2578] McCloghrie, K., Ed., Perkins, D., Ed., [RFC2578] McCloghrie, K., Ed., Perkins, D., Ed.,
and J. Schoenwaelder, Ed., "Structure and J. Schoenwaelder, Ed., "Structure
of Management Information Version 2 of Management Information Version 2
(SMIv2)", STD 58, RFC 2578, April 1999. (SMIv2)", STD 58, RFC 2578, April 1999.
skipping to change at page 31, line 37 skipping to change at page 32, line 29
[RFC2515] Tesink, K., "Definitions of Managed [RFC2515] Tesink, K., "Definitions of Managed
Objects for ATM Management", RFC 2515, Objects for ATM Management", RFC 2515,
February 1999. February 1999.
[RFC3410] Case, J., Mundy, R., Partain, D., and [RFC3410] Case, J., Mundy, R., Partain, D., and
B. Stewart, "Introduction and B. Stewart, "Introduction and
Applicability Statements for Internet- Applicability Statements for Internet-
Standard Management Framework", Standard Management Framework",
RFC 3410, December 2002. RFC 3410, December 2002.
[RFC3414] Blumenthal, U. and B. Wijnen, "User-
based Security Model (USM) for version
3 of the Simple Network Management
Protocol (SNMPv3)", STD 62, RFC 3414,
December 2002.
[RFC3593] Tesink, K., "Textual Conventions for [RFC3593] Tesink, K., "Textual Conventions for
MIB Modules Using Performance History MIB Modules Using Performance History
Based on 15 Minute Intervals", Based on 15 Minute Intervals",
RFC 3593, September 2003. RFC 3593, September 2003.
[RFC3826] Blumenthal, U., Maino, F., and K.
McCloghrie, "The Advanced Encryption
Standard (AES) Cipher Algorithm in the
SNMP User-based Security Model",
RFC 3826, June 2004.
[RFC4181] Heard, C., "Guidelines for Authors and [RFC4181] Heard, C., "Guidelines for Authors and
Reviewers of MIB Documents", BCP 111, Reviewers of MIB Documents", BCP 111,
RFC 4181, September 2005. RFC 4181, September 2005.
[RFC5591] Harrington, D. and W. Hardaker,
"Transport Security Model for the
Simple Network Management Protocol
(SNMP)", RFC 5591, June 2009.
[RFC5592] Harrington, D., Salowey, J., and W.
Hardaker, "Secure Shell Transport Model
for the Simple Network Management
Protocol (SNMP)", RFC 5592, June 2009.
[RFC6353] Hardaker, W., "Transport Layer Security
(TLS) Transport Model for the Simple
Network Management Protocol (SNMP)",
RFC 6353, July 2011.
[af-phy-0086] ATM Forum, "Inverse Multiplexing for [af-phy-0086] ATM Forum, "Inverse Multiplexing for
ATM (IMA) Specification Version 1.1", ATM (IMA) Specification Version 1.1",
ATM Forum specification af-pfy- ATM Forum specification af-pfy-
0086.001, March 1999. 0086.001, March 1999.
URIs URIs
[1] <http://www.iana.org/> [1] <http://www.iana.org/>
Author's Address Author's Address
 End of changes. 177 change blocks. 
285 lines changed or deleted 358 lines changed or added

This html diff was produced by rfcdiff 1.41. The latest version is available from http://tools.ietf.org/tools/rfcdiff/