draft-ietf-adslmib-gbond-atm-mib-05.txt   draft-ietf-adslmib-gbond-atm-mib-06.txt 
Network Working Group E. Beili Network Working Group E. Beili
Internet-Draft Actelis Networks Internet-Draft Actelis Networks
Intended status: Standards Track February 02, 2012 Intended status: Standards Track March 12, 2012
Expires: August 5, 2012 Expires: September 13, 2012
ATM-Based xDSL Bonded Interfaces MIB ATM-Based xDSL Bonded Interfaces MIB
draft-ietf-adslmib-gbond-atm-mib-05.txt draft-ietf-adslmib-gbond-atm-mib-06.txt
Abstract Abstract
This document defines Management Information Base (MIB) module for This document defines Management Information Base (MIB) module for
use with network management protocols in TCP/IP based networks. This use with network management protocols in TCP/IP based networks. This
document proposes an extension to the GBOND-MIB module with a set of document proposes an extension to the GBOND-MIB module with a set of
objects for managing ATM-based multi-pair bonded xDSL interfaces, objects for managing ATM-based multi-pair bonded xDSL interfaces,
defined in ITU-T recommendation G.998.1. defined in ITU-T recommendation G.998.1.
Status of This Memo Status of This Memo
skipping to change at page 1, line 34 skipping to change at page 1, line 34
Internet-Drafts are working documents of the Internet Engineering Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet- working documents as Internet-Drafts. The list of current Internet-
Drafts is at http://datatracker.ietf.org/drafts/current/. Drafts is at http://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress." material or to cite them other than as "work in progress."
This Internet-Draft will expire on August 5, 2012. This Internet-Draft will expire on September 13, 2012.
Copyright Notice Copyright Notice
Copyright (c) 2012 IETF Trust and the persons identified as the Copyright (c) 2012 IETF Trust and the persons identified as the
document authors. All rights reserved. document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info) in effect on the date of (http://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents publication of this document. Please review these documents
skipping to change at page 4, line 27 skipping to change at page 4, line 27
index (ifIndex) is used to index instances of G.Bond/ATM ports, as index (ifIndex) is used to index instances of G.Bond/ATM ports, as
well as xDSL lines/channels, in a managed system. well as xDSL lines/channels, in a managed system.
4.2. Relationship to G.Bond MIB module 4.2. Relationship to G.Bond MIB module
GBOND-MIB [I-D.ietf-adslmib-gbond-mib] module defines management GBOND-MIB [I-D.ietf-adslmib-gbond-mib] module defines management
objects common for all Bonded multi-pair xDSL interfaces. In objects common for all Bonded multi-pair xDSL interfaces. In
particular it describes the bonding management, bonded port and particular it describes the bonding management, bonded port and
channel configuration, initialization sequence etc. channel configuration, initialization sequence etc.
Both GBOND-MIB and GBOND-ATM-MIB modules are REQUIRED to manage a Both GBOND-MIB and G9981-MIB modules are REQUIRED to manage a G.Bond/
G.Bond/ATM port. ATM port.
4.3. Relationship to ATM MIB module 4.3. Relationship to ATM MIB module
ATM-MIB [RFC2515] module defines management objects for an ATM ATM-MIB [RFC2515] module defines management objects for an ATM
interface. interface.
ATM-MIB module can be used to manage the ATM aspects of a G.Bond/ATM ATM-MIB module can be used to manage the ATM aspects of a G.Bond/ATM
port. port.
5. MIB Structure 5. MIB Structure
5.1. Overview 5.1. Overview
All management objects defined in the GBOND-ATM-MIB module are All management objects defined in the G9981-MIB module are contained
contained in a single group gBondAtmPort. This group is further in a single group g9981Port. This group is further split into 4 sub-
split into 4 sub-groups, structured as recommended by RFC 4181 groups, structured as recommended by RFC 4181 [RFC4181]:
[RFC4181]:
o gBondTdimPortNotifications - containing notifications (Up/ o g9981PortNotifications - containing notifications (Up/Downstream
Downstream Diff. Delay Tolerance Exceeded). Differential Delay Tolerance Exceeded).
o gBondAtmPortConfTable - containing objects for configuration of a o g9981PortConfTable - containing objects for configuration of a
G.Bond/ATM port. G.Bond/ATM port.
o gBondAtmPortStatusTable - containing objects providing overall o g9981PortStatusTable - containing objects providing overall status
status information of a G.Bond/ATM port, complementing the generic information of a G.Bond/ATM port, complementing the generic status
status information from the ifTable of IF-MIB and gBondFltStatus information from the ifTable of IF-MIB and gBondFltStatus of
of GBOND-MIB. GBOND-MIB.
o gBondAtmPM - containing objects providing historical performance o g9981PM - containing objects providing historical performance
monitoring (PM) information of a G.Bond/ATM port, complementing monitoring (PM) information of a G.Bond/ATM port, complementing
the PM information from the gBondPortPM of GBOND-MIB. the PM information from the gBondPortPM of GBOND-MIB.
Note that the rest of the objects for the Generic Bonded Sub-layer Note that the rest of the objects for the Generic Bonded Sub-layer
(GBS) port configuration, capabilities, status, notifications and (GBS) port configuration, capabilities, status, notifications and
performance monitoring is located in the GBOND-MIB module. performance monitoring is located in the GBOND-MIB module.
5.2. Performance Monitoring 5.2. Performance Monitoring
The OPTIONAL performance monitoring counters, thresholds and history The OPTIONAL performance monitoring counters, thresholds and history
skipping to change at page 6, line 5 skipping to change at page 6, line 5
service unavailability on that entity. The DESCRIPTION clause of service unavailability on that entity. The DESCRIPTION clause of
performance monitoring counters in this MIB module specifies which of performance monitoring counters in this MIB module specifies which of
the counters are inhibited during periods of service unavailability. the counters are inhibited during periods of service unavailability.
5.3. Mapping of Broadband Forum TR-159 Managed Objects 5.3. Mapping of Broadband Forum TR-159 Managed Objects
This section contains the mapping between relevant managed objects This section contains the mapping between relevant managed objects
(attributes) defined in [TR-159] and the managed objects defined in (attributes) defined in [TR-159] and the managed objects defined in
this document. this document.
+----------------------------+--------------------------------------+ +-----------------------------+-------------------------------------+
| TR-159 Managed Object | Corresponding SNMP Object | | TR-159 Managed Object | Corresponding SNMP Object |
+----------------------------+--------------------------------------+ +-----------------------------+-------------------------------------+
| oBondATM - Basic Package | | | oBondATM - Basic Package | |
| (Mandatory) | | | (Mandatory) | |
+----------------------------+--------------------------------------+ +-----------------------------+-------------------------------------+
| aIMARxLostCells | gBondAtmPortStatRxLostCells | | aIMARxLostCells | g9981PortStatRxLostCells |
+----------------------------+--------------------------------------+ +-----------------------------+-------------------------------------+
| aIMAPeerRxLostCells | gBondAtmPortStatTxLostCells | | aIMAPeerRxLostCells | g9981PortStatTxLostCells |
+----------------------------+--------------------------------------+ +-----------------------------+-------------------------------------+
| aIMAMaxUpDiffDelay | gBondAtmPortStatMaxUpDiffDelay | | aIMAMaxUpDiffDelay | g9981PortStatMaxUpDiffDelay |
+----------------------------+--------------------------------------+ +-----------------------------+-------------------------------------+
| aIMAMaxDownDiffDelay | gBondAtmPortStatMaxDnDiffDelay | | aIMAMaxDownDiffDelay | g9981PortStatMaxDnDiffDelay |
+----------------------------+--------------------------------------+ +-----------------------------+-------------------------------------+
| aIMAUpDiffDelayTolerance | gBondAtmPortConfUpDiffDelayTolerance | | aIMAUpDiffDelayTolerance | g9981PortConfUpDiffDelayTolerance |
+----------------------------+--------------------------------------+ +-----------------------------+-------------------------------------+
| aIMADownDiffDelayTolerance | gBondAtmPortConfDnDiffDelayTolerance | | aIMADownDiffDelayTolerance | g9981PortConfDnDiffDelayTolerance |
+----------------------------+--------------------------------------+ +-----------------------------+-------------------------------------+
| aIMADiffDelayToleranceExce | gBondAtmPortConfDiffDelayToleranceEx | | aIMADiffDelayToleranceExcee | g9981PortConfDiffDelayToleranceExce |
| ededEnable | ceededEnable | | dedEnable | ededEnable |
+----------------------------+--------------------------------------+ +-----------------------------+-------------------------------------+
| nIMAUpDiffDelayToleranceEx | gBondAtmUpDiffDelayToleranceExceeded | | nIMAUpDiffDelayToleranceExc | g9981UpDiffDelayToleranceExceeded |
| ceeded | | | eeded | |
+----------------------------+--------------------------------------+ +-----------------------------+-------------------------------------+
| nIMADownDiffDelayTolerance | gBondAtmDnDiffDelayToleranceExceeded | | nIMADownDiffDelayToleranceE | g9981DnDiffDelayToleranceExceeded |
| Exceeded | | | xceeded | |
+----------------------------+--------------------------------------+ +-----------------------------+-------------------------------------+
Table 1: Mapping of TR-159 Managed Objects Table 1: Mapping of TR-159 Managed Objects
6. G.Bond/ATM MIB Definitions 6. G.Bond/ATM MIB Definitions
GBOND-ATM-MIB DEFINITIONS ::= BEGIN G9981-MIB DEFINITIONS ::= BEGIN
IMPORTS IMPORTS
MODULE-IDENTITY, MODULE-IDENTITY,
OBJECT-TYPE, OBJECT-TYPE,
NOTIFICATION-TYPE, NOTIFICATION-TYPE,
mib-2, mib-2,
Unsigned32, Unsigned32,
Counter32 Counter32
FROM SNMPv2-SMI -- [RFC2578] FROM SNMPv2-SMI -- [RFC2578]
TEXTUAL-CONVENTION, TEXTUAL-CONVENTION,
skipping to change at page 7, line 15 skipping to change at page 7, line 15
ifIndex ifIndex
FROM IF-MIB -- [RFC2863] FROM IF-MIB -- [RFC2863]
HCPerfCurrentCount, HCPerfCurrentCount,
HCPerfIntervalCount, HCPerfIntervalCount,
HCPerfValidIntervals, HCPerfValidIntervals,
HCPerfInvalidIntervals, HCPerfInvalidIntervals,
HCPerfTimeElapsed HCPerfTimeElapsed
FROM HC-PerfHist-TC-MIB -- [RFC3705] FROM HC-PerfHist-TC-MIB -- [RFC3705]
; ;
------------------------------------------------------------------------ ------------------------------------------------------------------------
gBondAtmMIB MODULE-IDENTITY g9981MIB MODULE-IDENTITY
LAST-UPDATED "201202020000Z" -- Feb 02, 2012 LAST-UPDATED "201203120000Z" -- Mar 12, 2012
ORGANIZATION "IETF ADSL MIB Working Group" ORGANIZATION "IETF ADSL MIB Working Group"
CONTACT-INFO CONTACT-INFO
"WG charter: "WG charter:
http://www.ietf.org/html.charters/adslmib-charter.html http://www.ietf.org/html.charters/adslmib-charter.html
Mailing Lists: Mailing Lists:
General Discussion: adslmib@ietf.org General Discussion: adslmib@ietf.org
To Subscribe: adslmib-request@ietf.org To Subscribe: adslmib-request@ietf.org
In Body: subscribe your_email_address In Body: subscribe your_email_address
skipping to change at page 8, line 34 skipping to change at page 8, line 34
PM - Performance Monitoring PM - Performance Monitoring
RT - Remote Terminal RT - Remote Terminal
SNR - Signal to Noise Ratio SNR - Signal to Noise Ratio
SES - Severely Errored Seconds SES - Severely Errored Seconds
US - Unavailable Seconds US - Unavailable Seconds
Copyright (C) The IETF Trust (2012). Copyright (C) The IETF Trust (2012).
This version of this MIB module is part of RFC YYYY; This version of this MIB module is part of RFC YYYY;
see the RFC itself for full legal notices." see the RFC itself for full legal notices."
REVISION "201202020000Z" -- Feb 02, 2012 REVISION "201203120000Z" -- Mar 12, 2012
DESCRIPTION "Initial version, published as RFC YYYY." DESCRIPTION "Initial version, published as RFC YYYY."
-- EdNote: Replace YYYY with the actual RFC number & -- EdNote: Replace YYYY with the actual RFC number &
-- remove this note -- remove this note
::= { mib-2 ZZZ } ::= { mib-2 ZZZ }
-- EdNote: Replace ZZZ with a real OID once it is -- EdNote: Replace ZZZ with a real OID once it is
-- allocated & remove this note. -- allocated & remove this note.
-- Sections of the module -- Sections of the module
-- Structured as recommended by [RFC4181], Appendix D -- Structured as recommended by [RFC4181], Appendix D
gBondAtmObjects OBJECT IDENTIFIER ::= { gBondAtmMIB 1 } g9981Objects OBJECT IDENTIFIER ::= { g9981MIB 1 }
gBondAtmConformance OBJECT IDENTIFIER ::= { gBondAtmMIB 2 } g9981Conformance OBJECT IDENTIFIER ::= { g9981MIB 2 }
-- Groups in the module -- Groups in the module
gBondAtmPort OBJECT IDENTIFIER ::= { gBondAtmObjects 1 } g9981Port OBJECT IDENTIFIER ::= { g9981Objects 1 }
-- Textual Conventions -- Textual Conventions
MilliSeconds ::= TEXTUAL-CONVENTION MilliSeconds ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d" DISPLAY-HINT "d"
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Represents time unit value in milliseconds." "Represents time unit value in milliseconds."
SYNTAX Unsigned32 SYNTAX Unsigned32
-- Port Notifications Group -- Port Notifications Group
gBondAtmPortNotifications OBJECT IDENTIFIER g9981PortNotifications OBJECT IDENTIFIER
::= { gBondAtmPort 0 } ::= { g9981Port 0 }
gBondAtmUpDiffDelayToleranceExceeded NOTIFICATION-TYPE g9981UpDiffDelayToleranceExceeded NOTIFICATION-TYPE
OBJECTS { OBJECTS {
-- ifIndex is not needed here since we are under specific GBS -- ifIndex is not needed here since we are under specific GBS
gBondAtmPortConfUpDiffDelayTolerance, g9981PortConfUpDiffDelayTolerance,
gBondAtmPortStatMaxUpDiffDelay g9981PortStatMaxUpDiffDelay
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This notification indicates that the maximum upstream "This notification indicates that the maximum upstream
differential delay has exceeded the max upstream differential differential delay has exceeded the max upstream differential
delay threshold, specified by delay threshold, specified by
gBondAtmPortConfUpDiffDelayTolerance. g9981PortConfUpDiffDelayTolerance.
This notification MAY be sent for the GBS-C ports while the This notification MAY be sent for the GBS-C ports while the
port is up, on the crossing event in both directions: from port is up, on the crossing event in both directions: from
normal (diff. delay is above the threshold) to low (diff. normal (diff. delay is above the threshold) to low (diff.
delay equals the threshold or below it) and from low to delay equals the threshold or below it) and from low to
normal. This notification is not applicable to the GBS-R normal. This notification is not applicable to the GBS-R
ports. ports.
Generation of this notification is controlled by the Generation of this notification is controlled by the
gBondAtmPortConfDiffDelayToleranceExceededEnable attribute. g9981PortConfDiffDelayToleranceExceededEnable attribute.
This object maps to the TR-159 notification This object maps to the TR-159 notification
nIMAUpDiffDelayToleranceExceeded." nIMAUpDiffDelayToleranceExceeded."
REFERENCE REFERENCE
"[TR-159] 5.5.2.8" "[TR-159] 5.5.2.8"
::= { gBondAtmPortNotifications 1 } ::= { g9981PortNotifications 1 }
gBondAtmDnDiffDelayToleranceExceeded NOTIFICATION-TYPE g9981DnDiffDelayToleranceExceeded NOTIFICATION-TYPE
OBJECTS { OBJECTS {
-- ifIndex is not needed here since we are under specific GBS -- ifIndex is not needed here since we are under specific GBS
gBondAtmPortConfDnDiffDelayTolerance, g9981PortConfDnDiffDelayTolerance,
gBondAtmPortStatMaxDnDiffDelay g9981PortStatMaxDnDiffDelay
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This notification indicates that the maximum downstream "This notification indicates that the maximum downstream
differential delay has exceeded the max downstream differential delay has exceeded the max downstream
differential delay threshold, specified by differential delay threshold, specified by
gBondAtmPortConfDnDiffDelayTolerance. g9981PortConfDnDiffDelayTolerance.
This notification MAY be sent for the GBS-C ports while the This notification MAY be sent for the GBS-C ports while the
port is up, on the crossing event in both directions: from port is up, on the crossing event in both directions: from
normal (diff. delay is above the threshold) to low (diff. normal (diff. delay is above the threshold) to low (diff.
delay equals the threshold or below it) and from low to delay equals the threshold or below it) and from low to
normal. This notification is not applicable to the GBS-R normal. This notification is not applicable to the GBS-R
ports. ports.
Generation of this notification is controlled by the Generation of this notification is controlled by the
gBondAtmPortConfDiffDelayToleranceExceededEnable attribute. g9981PortConfDiffDelayToleranceExceededEnable attribute.
This object maps to the TR-159 notification This object maps to the TR-159 notification
nIMADownDiffDelayToleranceExceeded." nIMADownDiffDelayToleranceExceeded."
REFERENCE REFERENCE
"[TR-159] 5.5.2.9" "[TR-159] 5.5.2.9"
::= { gBondAtmPortNotifications 2 } ::= { g9981PortNotifications 2 }
-- G.Bond/ATM Port group -- G.Bond/ATM Port group
gBondAtmPortConfTable OBJECT-TYPE g9981PortConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF GBondAtmPortConfEntry SYNTAX SEQUENCE OF G9981PortConfEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Table for Configuration of G.Bond/ATM ports. Entries in "Table for Configuration of G.Bond/ATM ports. Entries in
this table MUST be maintained in a persistent manner" this table MUST be maintained in a persistent manner"
::= { gBondAtmPort 1 } ::= { g9981Port 1 }
gBondAtmPortConfEntry OBJECT-TYPE g9981PortConfEntry OBJECT-TYPE
SYNTAX GBondAtmPortConfEntry SYNTAX G9981PortConfEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry in the G.Bond/ATM Port Configuration table. "An entry in the G.Bond/ATM Port Configuration table.
Each entry represents a G.Bond/ATM port indexed by the Each entry represents a G.Bond/ATM port indexed by the
ifIndex. Additional configuration parameters are available ifIndex. Additional configuration parameters are available
via the gBondPortConfEntry of GBOND-MIB. via the gBondPortConfEntry of GBOND-MIB.
Note that a G.Bond/ATM port runs on top of a single or Note that a G.Bond/ATM port runs on top of a single or
multiple BCE port(s), which are also indexed by ifIndex." multiple BCE port(s), which are also indexed by ifIndex."
INDEX { ifIndex } INDEX { ifIndex }
::= { gBondAtmPortConfTable 1 } ::= { g9981PortConfTable 1 }
GBondAtmPortConfEntry ::= G9981PortConfEntry ::=
SEQUENCE { SEQUENCE {
gBondAtmPortConfUpDiffDelayTolerance MilliSeconds, g9981PortConfUpDiffDelayTolerance MilliSeconds,
gBondAtmPortConfDnDiffDelayTolerance MilliSeconds, g9981PortConfDnDiffDelayTolerance MilliSeconds,
gBondAtmPortConfDiffDelayToleranceExceededEnable TruthValue g9981PortConfDiffDelayToleranceExceededEnable TruthValue
} }
gBondAtmPortConfUpDiffDelayTolerance OBJECT-TYPE g9981PortConfUpDiffDelayTolerance OBJECT-TYPE
SYNTAX MilliSeconds(0..2047) SYNTAX MilliSeconds(0..2047)
UNITS "milliseconds" UNITS "milliseconds"
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A maximum tolerated upstream differential delay (among "A maximum tolerated upstream differential delay (among
the member BCEs) of a G.Bond/ATM port, expressed in ms. the member BCEs) of a G.Bond/ATM port, expressed in ms.
This object is read-write for the GBS-C ports. This object is read-write for the GBS-C ports.
It is irrelevant for the GBS-R ports - an attempt to read or It is irrelevant for the GBS-R ports - an attempt to read or
change this object MUST be rejected (in case of SNMP with the change this object MUST be rejected (in case of SNMP with the
error inconsistentValue). error inconsistentValue).
This object maps to TR-159 attribute This object maps to TR-159 attribute
aIMAUpDiffDelayTolerance" aIMAUpDiffDelayTolerance"
REFERENCE REFERENCE
"[TR-159] 5.5.2.5; [G.998.1] 11.4.1 (6)" "[TR-159] 5.5.2.5; [G.998.1] 11.4.1 (6)"
::= { gBondAtmPortConfEntry 1 } ::= { g9981PortConfEntry 1 }
gBondAtmPortConfDnDiffDelayTolerance OBJECT-TYPE g9981PortConfDnDiffDelayTolerance OBJECT-TYPE
SYNTAX MilliSeconds(0..2047) SYNTAX MilliSeconds(0..2047)
UNITS "milliseconds" UNITS "milliseconds"
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A maximum tolerated downstream differential delay (among "A maximum tolerated downstream differential delay (among
the member BCEs) of a G.Bond/ATM port, expressed in ms. the member BCEs) of a G.Bond/ATM port, expressed in ms.
This object is read-write for the GBS-C ports. This object is read-write for the GBS-C ports.
It is irrelevant for the GBS-R ports - an attempt to read or It is irrelevant for the GBS-R ports - an attempt to read or
change this object MUST be rejected (in case of SNMP with the change this object MUST be rejected (in case of SNMP with the
error inconsistentValue). error inconsistentValue).
This object maps to TR-159 attribute This object maps to TR-159 attribute
aIMADownDiffDelayTolerance" aIMADownDiffDelayTolerance"
REFERENCE REFERENCE
"[TR-159] 5.5.2.6; [G.998.1] 11.4.1 (6)" "[TR-159] 5.5.2.6; [G.998.1] 11.4.1 (6)"
::= { gBondAtmPortConfEntry 2 } ::= { g9981PortConfEntry 2 }
gBondAtmPortConfDiffDelayToleranceExceededEnable OBJECT-TYPE g9981PortConfDiffDelayToleranceExceededEnable OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates whether gBondAtmUpDiffDelayToleranceExceeded and "Indicates whether g9981UpDiffDelayToleranceExceeded and
gBondAtmDnDiffDelayToleranceExceeded notifications should g9981DnDiffDelayToleranceExceeded notifications should
be generated for G.Bond/ATM port. be generated for G.Bond/ATM port.
Value of true(1) indicates that the notifications are enabled. Value of true(1) indicates that the notifications are enabled.
Value of false(2) indicates that the notifications are Value of false(2) indicates that the notifications are
disabled. disabled.
This object is read-write for the GBS-C. This object is read-write for the GBS-C.
It is irrelevant for the GBS-R ports - an attempt to read or It is irrelevant for the GBS-R ports - an attempt to read or
change this object MUST be rejected (in case of SNMP with the change this object MUST be rejected (in case of SNMP with the
error inconsistentValue). error inconsistentValue).
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aIMADiffDelayToleranceExceededEnable." aIMADiffDelayToleranceExceededEnable."
REFERENCE REFERENCE
"[TR-159] 5.5.5.7" "[TR-159] 5.5.5.7"
::= { gBondAtmPortConfEntry 3 } ::= { g9981PortConfEntry 3 }
gBondAtmPortStatTable OBJECT-TYPE g9981PortStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF GBondAtmPortStatEntry SYNTAX SEQUENCE OF G9981PortStatEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table provides overall status information of G.Bond/ATM "This table provides overall status information of G.Bond/ATM
ports, complementing the generic status information from the ports, complementing the generic status information from the
ifTable of IF-MIB and gBondFltStatus of GBOND-MIB. ifTable of IF-MIB and gBondFltStatus of GBOND-MIB.
Additional status information about connected BCEs is available Additional status information about connected BCEs is available
from the relevant line MIBs. from the relevant line MIBs.
This table contains live data from the equipment. As such, it is This table contains live data from the equipment. As such, it is
NOT persistent." NOT persistent."
::= { gBondAtmPort 2 } ::= { g9981Port 2 }
gBondAtmPortStatEntry OBJECT-TYPE g9981PortStatEntry OBJECT-TYPE
SYNTAX GBondAtmPortStatEntry SYNTAX G9981PortStatEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry in the G.Bond/ATM port Status table. "An entry in the G.Bond/ATM port Status table.
Each entry represents a G.Bond/ATM port indexed by the Each entry represents a G.Bond/ATM port indexed by the
ifIndex. ifIndex.
Note that a GBS port runs on top of a single or multiple BCE Note that a GBS port runs on top of a single or multiple BCE
port(s), which are also indexed by ifIndex." port(s), which are also indexed by ifIndex."
INDEX { ifIndex } INDEX { ifIndex }
::= { gBondAtmPortStatTable 1 } ::= { g9981PortStatTable 1 }
GBondAtmPortStatEntry ::= G9981PortStatEntry ::=
SEQUENCE { SEQUENCE {
gBondAtmPortStatRxLostCells Counter32, g9981PortStatRxLostCells Counter32,
gBondAtmPortStatTxLostCells Counter32, g9981PortStatTxLostCells Counter32,
gBondAtmPortStatMaxUpDiffDelay Unsigned32, g9981PortStatMaxUpDiffDelay Unsigned32,
gBondAtmPortStatMaxDnDiffDelay Unsigned32 g9981PortStatMaxDnDiffDelay Unsigned32
} }
gBondAtmPortStatRxLostCells OBJECT-TYPE g9981PortStatRxLostCells OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
UNITS "cells" UNITS "cells"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of lost ATM cells detected by the G.Bond/ATM port "The number of lost ATM cells detected by the G.Bond/ATM port
in the receive direction, i.e. upstream direction for in the receive direction, i.e. upstream direction for
a GBS-C port. a GBS-C port.
Discontinuities in the value of this counter can occur at Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other times re-initialization of the management system, and at other times
as indicated by the value of ifCounterDiscontinuityTime, as indicated by the value of ifCounterDiscontinuityTime,
defined in IF-MIB. defined in IF-MIB.
This object maps to TR-159 attribute aIMARxLostCells." This object maps to TR-159 attribute aIMARxLostCells."
REFERENCE REFERENCE
"[TR-159] 5.5.2.1; [G.998.1] 11.4.2 (4)" "[TR-159] 5.5.2.1; [G.998.1] 11.4.2 (4)"
::= { gBondAtmPortStatEntry 1 } ::= { g9981PortStatEntry 1 }
gBondAtmPortStatTxLostCells OBJECT-TYPE g9981PortStatTxLostCells OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
UNITS "cells" UNITS "cells"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of lost ATM cells detected by the peer G.Bond/ATM "The number of lost ATM cells detected by the peer G.Bond/ATM
port in the receive direction, e.g. downstream direction for a port in the receive direction, e.g. downstream direction for a
GBS-C port. GBS-C port.
This object is irrelevant for the GBS-R ports - an attempt to This object is irrelevant for the GBS-R ports - an attempt to
skipping to change at page 14, line 13 skipping to change at page 14, line 13
inconsistentValue). inconsistentValue).
Discontinuities in the value of this counter can occur at Discontinuities in the value of this counter can occur at
re-initialization of the management system, and at other times re-initialization of the management system, and at other times
as indicated by the value of ifCounterDiscontinuityTime, as indicated by the value of ifCounterDiscontinuityTime,
defined in IF-MIB. defined in IF-MIB.
This object maps to TR-159 attribute aIMAPeerRxLostCells." This object maps to TR-159 attribute aIMAPeerRxLostCells."
REFERENCE REFERENCE
"[TR-159] 5.5.2.1; [G.998.1] 11.4.2 (4)" "[TR-159] 5.5.2.1; [G.998.1] 11.4.2 (4)"
::= { gBondAtmPortStatEntry 2 } ::= { g9981PortStatEntry 2 }
gBondAtmPortStatMaxUpDiffDelay OBJECT-TYPE g9981PortStatMaxUpDiffDelay OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "0.1 ms" UNITS "0.1 ms"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Current maximum upstream differential delay between all "Current maximum upstream differential delay between all
operational BCEs in the G.Bond/ATM bonding group, measured in operational BCEs in the G.Bond/ATM bonding group, measured in
units of 0.1 ms. units of 0.1 ms.
This object is read-only for the GBS-C ports. This object is read-only for the GBS-C ports.
It is irrelevant for the GBS-R ports - an attempt to read this It is irrelevant for the GBS-R ports - an attempt to read this
object MUST be rejected (in case of SNMP with the error object MUST be rejected (in case of SNMP with the error
inconsistentValue). inconsistentValue).
This object maps to TR-159 attribute aIMAMaxUpDiffDelay." This object maps to TR-159 attribute aIMAMaxUpDiffDelay."
REFERENCE REFERENCE
"[TR-159] 5.5.2.3" "[TR-159] 5.5.2.3"
::= { gBondAtmPortStatEntry 3 } ::= { g9981PortStatEntry 3 }
gBondAtmPortStatMaxDnDiffDelay OBJECT-TYPE g9981PortStatMaxDnDiffDelay OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "0.1 ms" UNITS "0.1 ms"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Current maximum downstream differential delay between all "Current maximum downstream differential delay between all
operational BCEs in the G.Bond/ATM bonding group, measured in operational BCEs in the G.Bond/ATM bonding group, measured in
units of 0.1 ms. units of 0.1 ms.
This object is read-only for the GBS-C ports. This object is read-only for the GBS-C ports.
It is irrelevant for the GBS-R ports - an attempt to read this It is irrelevant for the GBS-R ports - an attempt to read this
object MUST be rejected (in case of SNMP with the error object MUST be rejected (in case of SNMP with the error
inconsistentValue). inconsistentValue).
This object maps to TR-159 attribute aIMAMaxDownDiffDelay." This object maps to TR-159 attribute aIMAMaxDownDiffDelay."
REFERENCE REFERENCE
"[TR-159] 5.5.2.4" "[TR-159] 5.5.2.4"
::= { gBondAtmPortStatEntry 4 } ::= { g9981PortStatEntry 4 }
------------------------------- -------------------------------
-- Performance Monitoring group -- Performance Monitoring group
------------------------------- -------------------------------
gBondAtmPM OBJECT IDENTIFIER ::= { gBondAtmPort 3 } g9981PM OBJECT IDENTIFIER ::= { g9981Port 3 }
gBondAtmPortPmCurTable OBJECT-TYPE g9981PortPmCurTable OBJECT-TYPE
SYNTAX SEQUENCE OF GBondAtmPortPmCurEntry SYNTAX SEQUENCE OF G9981PortPmCurEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table contains current Performance Monitoring information "This table contains current Performance Monitoring information
for a G.Bond/ATM port. This table contains live data from the for a G.Bond/ATM port. This table contains live data from the
equipment and as such is NOT persistent." equipment and as such is NOT persistent."
::= { gBondAtmPM 1 } ::= { g9981PM 1 }
gBondAtmPortPmCurEntry OBJECT-TYPE g9981PortPmCurEntry OBJECT-TYPE
SYNTAX GBondAtmPortPmCurEntry SYNTAX G9981PortPmCurEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry in the G.Bond/ATM Port PM table. "An entry in the G.Bond/ATM Port PM table.
Each entry represents a G.Bond/ATM port indexed by the Each entry represents a G.Bond/ATM port indexed by the
ifIndex." ifIndex."
INDEX { ifIndex } INDEX { ifIndex }
::= { gBondAtmPortPmCurTable 1 } ::= { g9981PortPmCurTable 1 }
GBondAtmPortPmCurEntry ::= G9981PortPmCurEntry ::=
SEQUENCE { SEQUENCE {
gBondAtmPortPmCur15MinValidIntervals HCPerfValidIntervals, g9981PortPmCur15MinValidIntervals HCPerfValidIntervals,
gBondAtmPortPmCur15MinInvalidIntervals HCPerfInvalidIntervals, g9981PortPmCur15MinInvalidIntervals HCPerfInvalidIntervals,
gBondAtmPortPmCur15MinTimeElapsed HCPerfTimeElapsed, g9981PortPmCur15MinTimeElapsed HCPerfTimeElapsed,
gBondAtmPortPmCur15MinRxLostCells HCPerfCurrentCount, g9981PortPmCur15MinRxLostCells HCPerfCurrentCount,
gBondAtmPortPmCur15MinTxLostCells HCPerfCurrentCount, g9981PortPmCur15MinTxLostCells HCPerfCurrentCount,
gBondAtmPortPmCur15MinUpDiffDelay HCPerfCurrentCount, g9981PortPmCur15MinUpDiffDelay HCPerfCurrentCount,
gBondAtmPortPmCur15MinDnDiffDelay HCPerfCurrentCount, g9981PortPmCur15MinDnDiffDelay HCPerfCurrentCount,
gBondAtmPortPmCur1DayValidIntervals Unsigned32, g9981PortPmCur1DayValidIntervals Unsigned32,
gBondAtmPortPmCur1DayInvalidIntervals Unsigned32, g9981PortPmCur1DayInvalidIntervals Unsigned32,
gBondAtmPortPmCur1DayTimeElapsed HCPerfTimeElapsed, g9981PortPmCur1DayTimeElapsed HCPerfTimeElapsed,
gBondAtmPortPmCur1DayRxLostCells HCPerfCurrentCount, g9981PortPmCur1DayRxLostCells HCPerfCurrentCount,
gBondAtmPortPmCur1DayTxLostCells HCPerfCurrentCount, g9981PortPmCur1DayTxLostCells HCPerfCurrentCount,
gBondAtmPortPmCur1DayUpDiffDelay HCPerfCurrentCount, g9981PortPmCur1DayUpDiffDelay HCPerfCurrentCount,
gBondAtmPortPmCur1DayDnDiffDelay HCPerfCurrentCount g9981PortPmCur1DayDnDiffDelay HCPerfCurrentCount
} }
gBondAtmPortPmCur15MinValidIntervals OBJECT-TYPE g9981PortPmCur15MinValidIntervals OBJECT-TYPE
SYNTAX HCPerfValidIntervals SYNTAX HCPerfValidIntervals
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only number of 15-minute intervals for which the "A read-only number of 15-minute intervals for which the
performance data was collected. The value of this object will performance data was collected. The value of this object will
be 96 or the maximum number of 15-minute history intervals be 96 or the maximum number of 15-minute history intervals
collected by the implementation unless the measurement was collected by the implementation unless the measurement was
(re-)started recently, in which case the value will be the (re-)started recently, in which case the value will be the
number of complete 15 minutes intervals for which there are at number of complete 15 minutes intervals for which there are at
least some data. least some data.
In certain cases it is possible that some intervals are In certain cases it is possible that some intervals are
unavailable. In this case, this object reports the maximum unavailable. In this case, this object reports the maximum
interval number for which data is available. interval number for which data is available.
This object partially maps to the TR-159 attribute This object partially maps to the TR-159 attribute
aGroupPerf15MinValidIntervals." aGroupPerf15MinValidIntervals."
REFERENCE REFERENCE
"[TR-159] 5.5.1.32" "[TR-159] 5.5.1.32"
::= { gBondAtmPortPmCurEntry 1 } ::= { g9981PortPmCurEntry 1 }
gBondAtmPortPmCur15MinInvalidIntervals OBJECT-TYPE g9981PortPmCur15MinInvalidIntervals OBJECT-TYPE
SYNTAX HCPerfInvalidIntervals SYNTAX HCPerfInvalidIntervals
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only number of 15-minute intervals for which the "A read-only number of 15-minute intervals for which the
performance data was not always available. The value will performance data was not always available. The value will
typically be zero except in cases where the data for some typically be zero except in cases where the data for some
intervals are not available. intervals are not available.
This object partially maps to the TR-159 attribute This object partially maps to the TR-159 attribute
aGroupPerf15MinInvalidIntervals." aGroupPerf15MinInvalidIntervals."
REFERENCE REFERENCE
"[TR-159] 5.5.1.33" "[TR-159] 5.5.1.33"
::= { gBondAtmPortPmCurEntry 2 } ::= { g9981PortPmCurEntry 2 }
gBondAtmPortPmCur15MinTimeElapsed OBJECT-TYPE g9981PortPmCur15MinTimeElapsed OBJECT-TYPE
SYNTAX HCPerfTimeElapsed SYNTAX HCPerfTimeElapsed
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only count of seconds that have elapsed since the "A read-only count of seconds that have elapsed since the
beginning of the current 15-minute performance interval. beginning of the current 15-minute performance interval.
This object partially maps to the TR-159 attribute This object partially maps to the TR-159 attribute
aGroupPerfCurr15MinTimeElapsed." aGroupPerfCurr15MinTimeElapsed."
REFERENCE REFERENCE
"[TR-159] 5.5.1.34" "[TR-159] 5.5.1.34"
::= { gBondAtmPortPmCurEntry 3 } ::= { g9981PortPmCurEntry 3 }
gBondAtmPortPmCur15MinRxLostCells OBJECT-TYPE g9981PortPmCur15MinRxLostCells OBJECT-TYPE
SYNTAX HCPerfCurrentCount SYNTAX HCPerfCurrentCount
UNITS "cells" UNITS "cells"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only count of lost ATM cells detected by a G.Bond/ATM "A read-only count of lost ATM cells detected by a G.Bond/ATM
port (e.g. GBS-C) in the receive direction, during the current port (e.g. GBS-C) in the receive direction, during the current
15-minute performance history interval. 15-minute performance history interval.
Note that the total number of lost ATM cells is indicated by the Note that the total number of lost ATM cells is indicated by the
gBondAtmPortStatRxLostCells object. g9981PortStatRxLostCells object.
This object is inhibited during Severely Errored Seconds (SES) This object is inhibited during Severely Errored Seconds (SES)
or Unavailable Seconds (UAS)." or Unavailable Seconds (UAS)."
REFERENCE REFERENCE
"[TR-159] 5.5.2.1" "[TR-159] 5.5.2.1"
::= { gBondAtmPortPmCurEntry 4} ::= { g9981PortPmCurEntry 4}
gBondAtmPortPmCur15MinTxLostCells OBJECT-TYPE g9981PortPmCur15MinTxLostCells OBJECT-TYPE
SYNTAX HCPerfCurrentCount SYNTAX HCPerfCurrentCount
UNITS "cells" UNITS "cells"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only count of lost ATM cells detected by the peer "A read-only count of lost ATM cells detected by the peer
G.Bond/ATM port (e.g. by GBS-R for GBS-C), during the current G.Bond/ATM port (e.g. by GBS-R for GBS-C), during the current
15-minute performance history interval. 15-minute performance history interval.
Note that the total number of lost ATM cells is indicated by the Note that the total number of lost ATM cells is indicated by the
gBondAtmPortStatTxLostCells object. g9981PortStatTxLostCells object.
This object is inhibited during Unavailable Seconds (UAS)." This object is inhibited during Unavailable Seconds (UAS)."
REFERENCE REFERENCE
"[TR-159] 5.5.2.2" "[TR-159] 5.5.2.2"
::= { gBondAtmPortPmCurEntry 5} ::= { g9981PortPmCurEntry 5}
gBondAtmPortPmCur15MinUpDiffDelay OBJECT-TYPE g9981PortPmCur15MinUpDiffDelay OBJECT-TYPE
SYNTAX HCPerfCurrentCount SYNTAX HCPerfCurrentCount
UNITS "0.1 ms" UNITS "0.1 ms"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only value specifying maximum upstream differential "A read-only value specifying maximum upstream differential
delay between all operational BCEs in the GBS-C, measured in delay between all operational BCEs in the GBS-C, measured in
units of 0.1 ms, during the current 15-minute performance units of 0.1 ms, during the current 15-minute performance
interval. interval.
Note that the current max upstream differential delay is Note that the current max upstream differential delay is
indicated by the gBondAtmPortStatMaxUpDiffDelay object. indicated by the g9981PortStatMaxUpDiffDelay object.
This object is inhibited during Unavailable Seconds (UAS)." This object is inhibited during Unavailable Seconds (UAS)."
REFERENCE REFERENCE
"[TR-159] 5.5.2.3" "[TR-159] 5.5.2.3"
::= { gBondAtmPortPmCurEntry 6} ::= { g9981PortPmCurEntry 6}
gBondAtmPortPmCur15MinDnDiffDelay OBJECT-TYPE g9981PortPmCur15MinDnDiffDelay OBJECT-TYPE
SYNTAX HCPerfCurrentCount SYNTAX HCPerfCurrentCount
UNITS "0.1 ms" UNITS "0.1 ms"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only value specifying maximum downstream differential "A read-only value specifying maximum downstream differential
delay between all operational BCEs in the GBS-C (as perceived delay between all operational BCEs in the GBS-C (as perceived
by GBS-R), measured in units of 0.1 ms, during the current by GBS-R), measured in units of 0.1 ms, during the current
15-minute performance history interval. 15-minute performance history interval.
Note that the current max downstream differential delay is Note that the current max downstream differential delay is
indicated by the gBondAtmPortStatMaxDnDiffDelay object. indicated by the g9981PortStatMaxDnDiffDelay object.
This object is inhibited during Unavailable Seconds (UAS)." This object is inhibited during Unavailable Seconds (UAS)."
REFERENCE REFERENCE
"[TR-159] 5.5.2.4" "[TR-159] 5.5.2.4"
::= { gBondAtmPortPmCurEntry 7} ::= { g9981PortPmCurEntry 7}
gBondAtmPortPmCur1DayValidIntervals OBJECT-TYPE g9981PortPmCur1DayValidIntervals OBJECT-TYPE
SYNTAX Unsigned32 (0..7) SYNTAX Unsigned32 (0..7)
UNITS "days" UNITS "days"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only number of 1-day intervals for which data was "A read-only number of 1-day intervals for which data was
collected. The value of this object will be 7 or the maximum collected. The value of this object will be 7 or the maximum
number of 1-day history intervals collected by the number of 1-day history intervals collected by the
implementation unless the measurement was (re-)started recently, implementation unless the measurement was (re-)started recently,
in which case the value will be the number of complete 1-day in which case the value will be the number of complete 1-day
intervals for which there are at least some data. intervals for which there are at least some data.
In certain cases it is possible that some intervals are In certain cases it is possible that some intervals are
unavailable. In this case, this object reports the maximum unavailable. In this case, this object reports the maximum
interval number for which data is available." interval number for which data is available."
REFERENCE REFERENCE
"[TR-159] 5.5.1.45" "[TR-159] 5.5.1.45"
::= { gBondAtmPortPmCurEntry 8 } ::= { g9981PortPmCurEntry 8 }
gBondAtmPortPmCur1DayInvalidIntervals OBJECT-TYPE g9981PortPmCur1DayInvalidIntervals OBJECT-TYPE
SYNTAX Unsigned32 (0..7) SYNTAX Unsigned32 (0..7)
UNITS "days" UNITS "days"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only number of 1-day intervals for which data was "A read-only number of 1-day intervals for which data was
not always available. The value will typically be zero except in not always available. The value will typically be zero except in
cases where the data for some intervals are not available." cases where the data for some intervals are not available."
REFERENCE REFERENCE
"[TR-159] 5.5.1.46" "[TR-159] 5.5.1.46"
::= { gBondAtmPortPmCurEntry 9 } ::= { g9981PortPmCurEntry 9 }
gBondAtmPortPmCur1DayTimeElapsed OBJECT-TYPE g9981PortPmCur1DayTimeElapsed OBJECT-TYPE
SYNTAX HCPerfTimeElapsed SYNTAX HCPerfTimeElapsed
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only count of seconds that have elapsed since the "A read-only count of seconds that have elapsed since the
beginning of the current 1-day performance interval." beginning of the current 1-day performance interval."
REFERENCE REFERENCE
"[TR-159] 5.5.1.47" "[TR-159] 5.5.1.47"
::= { gBondAtmPortPmCurEntry 10 } ::= { g9981PortPmCurEntry 10 }
gBondAtmPortPmCur1DayRxLostCells OBJECT-TYPE g9981PortPmCur1DayRxLostCells OBJECT-TYPE
SYNTAX HCPerfCurrentCount SYNTAX HCPerfCurrentCount
UNITS "cells" UNITS "cells"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only count of lost ATM cells detected by the G.Bond/ATM "A read-only count of lost ATM cells detected by the G.Bond/ATM
port (e.g. GBS-C), during the current 1-day performance port (e.g. GBS-C), during the current 1-day performance
interval. interval.
This object is inhibited during Severely Errored Seconds (SES) This object is inhibited during Severely Errored Seconds (SES)
and Unavailable Seconds (UAS)." and Unavailable Seconds (UAS)."
::= { gBondAtmPortPmCurEntry 11 } ::= { g9981PortPmCurEntry 11 }
gBondAtmPortPmCur1DayTxLostCells OBJECT-TYPE g9981PortPmCur1DayTxLostCells OBJECT-TYPE
SYNTAX HCPerfCurrentCount SYNTAX HCPerfCurrentCount
UNITS "cells" UNITS "cells"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only count of lost ATM cells detected by the peer "A read-only count of lost ATM cells detected by the peer
G.Bond/ATM port (e.g. by GBS-R for GBS-C), during the current G.Bond/ATM port (e.g. by GBS-R for GBS-C), during the current
1-day performance history interval. 1-day performance history interval.
This object is inhibited during Unavailable Seconds (UAS)." This object is inhibited during Unavailable Seconds (UAS)."
::= { gBondAtmPortPmCurEntry 12 } ::= { g9981PortPmCurEntry 12 }
gBondAtmPortPmCur1DayUpDiffDelay OBJECT-TYPE g9981PortPmCur1DayUpDiffDelay OBJECT-TYPE
SYNTAX HCPerfCurrentCount SYNTAX HCPerfCurrentCount
UNITS "0.1 ms" UNITS "0.1 ms"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only value specifying maximum upstream differential "A read-only value specifying maximum upstream differential
delay between all operational BCEs in the GBS-C, measured in delay between all operational BCEs in the GBS-C, measured in
units of 0.1 ms, during the current 1-day performance units of 0.1 ms, during the current 1-day performance
interval. interval.
This object is inhibited during Unavailable Seconds (UAS)." This object is inhibited during Unavailable Seconds (UAS)."
::= { gBondAtmPortPmCurEntry 13 } ::= { g9981PortPmCurEntry 13 }
gBondAtmPortPmCur1DayDnDiffDelay OBJECT-TYPE g9981PortPmCur1DayDnDiffDelay OBJECT-TYPE
SYNTAX HCPerfCurrentCount SYNTAX HCPerfCurrentCount
UNITS "0.1 ms" UNITS "0.1 ms"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only value specifying maximum downstream differential "A read-only value specifying maximum downstream differential
delay between all operational BCEs in the GBS-C, measured in delay between all operational BCEs in the GBS-C, measured in
units of 0.1 ms, during the current 1-day performance units of 0.1 ms, during the current 1-day performance
interval. interval.
This object is inhibited during Unavailable Seconds (UAS)." This object is inhibited during Unavailable Seconds (UAS)."
::= { gBondAtmPortPmCurEntry 14 } ::= { g9981PortPmCurEntry 14 }
-- Port PM history: 15-min buckets -- Port PM history: 15-min buckets
gBondAtmPortPm15MinTable OBJECT-TYPE g9981PortPm15MinTable OBJECT-TYPE
SYNTAX SEQUENCE OF GBondAtmPortPm15MinEntry SYNTAX SEQUENCE OF G9981PortPm15MinEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table contains historical 15-minute buckets of Performance "This table contains historical 15-minute buckets of Performance
Monitoring information for a G.Bond/ATM port (a row for each Monitoring information for a G.Bond/ATM port (a row for each
15-minute interval, up to 96 intervals). 15-minute interval, up to 96 intervals).
Entries in this table MUST be maintained in a persistent manner." Entries in this table MUST be maintained in a persistent manner."
::= { gBondAtmPM 2 } ::= { g9981PM 2 }
gBondAtmPortPm15MinEntry OBJECT-TYPE g9981PortPm15MinEntry OBJECT-TYPE
SYNTAX GBondAtmPortPm15MinEntry SYNTAX G9981PortPm15MinEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry in the G.Bond/ATM Port historical 15-minute PM table. "An entry in the G.Bond/ATM Port historical 15-minute PM table.
Each entry represents performance monitoring data for a Each entry represents performance monitoring data for a
G.Bond/ATM port, indexed by ifIndex, collected during a G.Bond/ATM port, indexed by ifIndex, collected during a
particular 15-minute interval, indexed by particular 15-minute interval, indexed by
gBondAtmPortPm15MinIntervalIndex." g9981PortPm15MinIntervalIndex."
INDEX { ifIndex, gBondAtmPortPm15MinIntervalIndex } INDEX { ifIndex, g9981PortPm15MinIntervalIndex }
::= { gBondAtmPortPm15MinTable 1 } ::= { g9981PortPm15MinTable 1 }
GBondAtmPortPm15MinEntry ::= G9981PortPm15MinEntry ::=
SEQUENCE { SEQUENCE {
gBondAtmPortPm15MinIntervalIndex Unsigned32, g9981PortPm15MinIntervalIndex Unsigned32,
gBondAtmPortPm15MinIntervalMoniTime HCPerfTimeElapsed, g9981PortPm15MinIntervalMoniTime HCPerfTimeElapsed,
gBondAtmPortPm15MinIntervalRxLostCells HCPerfIntervalCount, g9981PortPm15MinIntervalRxLostCells HCPerfIntervalCount,
gBondAtmPortPm15MinIntervalTxLostCells HCPerfIntervalCount, g9981PortPm15MinIntervalTxLostCells HCPerfIntervalCount,
gBondAtmPortPm15MinIntervalUpDiffDelay HCPerfIntervalCount, g9981PortPm15MinIntervalUpDiffDelay HCPerfIntervalCount,
gBondAtmPortPm15MinIntervalDnDiffDelay HCPerfIntervalCount, g9981PortPm15MinIntervalDnDiffDelay HCPerfIntervalCount,
gBondAtmPortPm15MinIntervalValid TruthValue g9981PortPm15MinIntervalValid TruthValue
} }
gBondAtmPortPm15MinIntervalIndex OBJECT-TYPE g9981PortPm15MinIntervalIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..96) SYNTAX Unsigned32 (1..96)
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Performance Data Interval number. 1 is the most recent previous "Performance Data Interval number. 1 is the most recent previous
interval; interval 96 is 24 hours ago. interval; interval 96 is 24 hours ago.
Intervals 2..96 are OPTIONAL. Intervals 2..96 are OPTIONAL.
This object partially maps to the TR-159 attribute This object partially maps to the TR-159 attribute
aGroupPerf15MinIntervalNumber." aGroupPerf15MinIntervalNumber."
REFERENCE REFERENCE
"[TR-159] 5.5.1.57" "[TR-159] 5.5.1.57"
::= { gBondAtmPortPm15MinEntry 1 } ::= { g9981PortPm15MinEntry 1 }
gBondAtmPortPm15MinIntervalMoniTime OBJECT-TYPE g9981PortPm15MinIntervalMoniTime OBJECT-TYPE
SYNTAX HCPerfTimeElapsed SYNTAX HCPerfTimeElapsed
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only count of seconds over which the performance data "A read-only count of seconds over which the performance data
was actually monitored. This value will be the same as the was actually monitored. This value will be the same as the
interval duration (900 seconds), except in a situation where interval duration (900 seconds), except in a situation where
performance data could not be collected for any reason." performance data could not be collected for any reason."
::= { gBondAtmPortPm15MinEntry 2 } ::= { g9981PortPm15MinEntry 2 }
gBondAtmPortPm15MinIntervalRxLostCells OBJECT-TYPE g9981PortPm15MinIntervalRxLostCells OBJECT-TYPE
SYNTAX HCPerfIntervalCount SYNTAX HCPerfIntervalCount
UNITS "cells" UNITS "cells"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only count of lost ATM cells detected by a G.Bond/ATM "A read-only count of lost ATM cells detected by a G.Bond/ATM
port (e.g. GBS-C) in the receive direction, during the port (e.g. GBS-C) in the receive direction, during the
15-minute performance history interval. 15-minute performance history interval.
Note that the total number of lost ATM cells is indicated by the Note that the total number of lost ATM cells is indicated by the
gBondAtmPortStatRxLostCells object. g9981PortStatRxLostCells object.
This object is inhibited during Severely Errored Seconds (SES) This object is inhibited during Severely Errored Seconds (SES)
or Unavailable Seconds (UAS)." or Unavailable Seconds (UAS)."
REFERENCE REFERENCE
"[TR-159] 5.5.2.1" "[TR-159] 5.5.2.1"
::= { gBondAtmPortPm15MinEntry 3 } ::= { g9981PortPm15MinEntry 3 }
gBondAtmPortPm15MinIntervalTxLostCells OBJECT-TYPE g9981PortPm15MinIntervalTxLostCells OBJECT-TYPE
SYNTAX HCPerfIntervalCount SYNTAX HCPerfIntervalCount
UNITS "cells" UNITS "cells"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only count of lost ATM cells detected by the peer "A read-only count of lost ATM cells detected by the peer
G.Bond/ATM port (e.g. by GBS-R for GBS-C), during the 15-minute G.Bond/ATM port (e.g. by GBS-R for GBS-C), during the 15-minute
performance history interval. performance history interval.
Note that the total number of lost ATM cells is indicated by the Note that the total number of lost ATM cells is indicated by the
gBondAtmPortStatTxLostCells object. g9981PortStatTxLostCells object.
This object is inhibited during Unavailable Seconds (UAS)." This object is inhibited during Unavailable Seconds (UAS)."
REFERENCE REFERENCE
"[TR-159] 5.5.2.2" "[TR-159] 5.5.2.2"
::= { gBondAtmPortPm15MinEntry 4 } ::= { g9981PortPm15MinEntry 4 }
gBondAtmPortPm15MinIntervalUpDiffDelay OBJECT-TYPE g9981PortPm15MinIntervalUpDiffDelay OBJECT-TYPE
SYNTAX HCPerfIntervalCount SYNTAX HCPerfIntervalCount
UNITS "0.1 ms" UNITS "0.1 ms"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only value specifying maximum upstream differential "A read-only value specifying maximum upstream differential
delay between all operational BCEs in the GBS, measured in delay between all operational BCEs in the GBS, measured in
units of 0.1 ms, during the 15-minute performance history units of 0.1 ms, during the 15-minute performance history
interval. interval.
Note that the current max upstream differential delay is Note that the current max upstream differential delay is
indicated by the gBondAtmPortStatMaxUpDiffDelay object. indicated by the g9981PortStatMaxUpDiffDelay object.
This object is inhibited during Unavailable Seconds (UAS)." This object is inhibited during Unavailable Seconds (UAS)."
REFERENCE REFERENCE
"[TR-159] 5.5.2.3" "[TR-159] 5.5.2.3"
::= { gBondAtmPortPm15MinEntry 5 } ::= { g9981PortPm15MinEntry 5 }
gBondAtmPortPm15MinIntervalDnDiffDelay OBJECT-TYPE g9981PortPm15MinIntervalDnDiffDelay OBJECT-TYPE
SYNTAX HCPerfIntervalCount SYNTAX HCPerfIntervalCount
UNITS "0.1 ms" UNITS "0.1 ms"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only value specifying maximum downstream differential "A read-only value specifying maximum downstream differential
delay between all operational BCEs in the GBS, as perceived by delay between all operational BCEs in the GBS, as perceived by
its peer port, measured in units of 0.1 ms, during the its peer port, measured in units of 0.1 ms, during the
15-minute performance history interval. 15-minute performance history interval.
Note that the current max upstream differential delay is Note that the current max upstream differential delay is
indicated by the gBondAtmPortStatMaxDnDiffDelay object. indicated by the g9981PortStatMaxDnDiffDelay object.
This object is inhibited during Unavailable Seconds (UAS)." This object is inhibited during Unavailable Seconds (UAS)."
REFERENCE REFERENCE
"[TR-159] 5.5.2.4" "[TR-159] 5.5.2.4"
::= { gBondAtmPortPm15MinEntry 6 } ::= { g9981PortPm15MinEntry 6 }
gBondAtmPortPm15MinIntervalValid OBJECT-TYPE g9981PortPm15MinIntervalValid OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only object indicating whether or not this history "A read-only object indicating whether or not this history
bucket contains valid data. Valid bucket is reported as true(1) bucket contains valid data. Valid bucket is reported as true(1)
and invalid bucket as false(2). and invalid bucket as false(2).
If this history bucket is invalid the BTU MUST NOT produce If this history bucket is invalid the BTU MUST NOT produce
notifications based upon the value of the counters in this notifications based upon the value of the counters in this
bucket. bucket.
Note that an implementation may decide not to store invalid Note that an implementation may decide not to store invalid
history buckets in its data base. In such case this object is history buckets in its data base. In such case this object is
not required as only valid history buckets are available while not required as only valid history buckets are available while
invalid history buckets are simply not in the data base. invalid history buckets are simply not in the data base.
This object partially maps to the TR-159 attribute This object partially maps to the TR-159 attribute
aGroupPerf15MinIntervalValid." aGroupPerf15MinIntervalValid."
REFERENCE REFERENCE
"[TR-159] 5.5.1.58" "[TR-159] 5.5.1.58"
::= { gBondAtmPortPm15MinEntry 7 } ::= { g9981PortPm15MinEntry 7 }
-- Port PM history: 1-day buckets -- Port PM history: 1-day buckets
gBondAtmPortPm1DayTable OBJECT-TYPE g9981PortPm1DayTable OBJECT-TYPE
SYNTAX SEQUENCE OF GBondAtmPortPm1DayEntry SYNTAX SEQUENCE OF G9981PortPm1DayEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table contains historical 1-day buckets of Performance "This table contains historical 1-day buckets of Performance
Monitoring information for a G.Bond/ATM port (a row for each Monitoring information for a G.Bond/ATM port (a row for each
1-day interval, up to 7 intervals). 1-day interval, up to 7 intervals).
Entries in this table MUST be maintained in a persistent manner." Entries in this table MUST be maintained in a persistent manner."
::= { gBondAtmPM 3 } ::= { g9981PM 3 }
gBondAtmPortPm1DayEntry OBJECT-TYPE g9981PortPm1DayEntry OBJECT-TYPE
SYNTAX GBondAtmPortPm1DayEntry SYNTAX G9981PortPm1DayEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry in the G.Bond/ATM port historical 1-day PM table. "An entry in the G.Bond/ATM port historical 1-day PM table.
Each entry represents performance monitoring data for such port, Each entry represents performance monitoring data for such port,
indexed by ifIndex, collected during a particular 1-day indexed by ifIndex, collected during a particular 1-day
interval, indexed by gBondAtmPortPm1DayIntervalIndex." interval, indexed by g9981PortPm1DayIntervalIndex."
INDEX { ifIndex, gBondAtmPortPm1DayIntervalIndex } INDEX { ifIndex, g9981PortPm1DayIntervalIndex }
::= { gBondAtmPortPm1DayTable 1 } ::= { g9981PortPm1DayTable 1 }
GBondAtmPortPm1DayEntry ::= G9981PortPm1DayEntry ::=
SEQUENCE { SEQUENCE {
gBondAtmPortPm1DayIntervalIndex Unsigned32, g9981PortPm1DayIntervalIndex Unsigned32,
gBondAtmPortPm1DayIntervalMoniTime HCPerfTimeElapsed, g9981PortPm1DayIntervalMoniTime HCPerfTimeElapsed,
gBondAtmPortPm1DayIntervalRxLostCells HCPerfIntervalCount, g9981PortPm1DayIntervalRxLostCells HCPerfIntervalCount,
gBondAtmPortPm1DayIntervalTxLostCells HCPerfIntervalCount, g9981PortPm1DayIntervalTxLostCells HCPerfIntervalCount,
gBondAtmPortPm1DayIntervalUpDiffDelay HCPerfIntervalCount, g9981PortPm1DayIntervalUpDiffDelay HCPerfIntervalCount,
gBondAtmPortPm1DayIntervalDnDiffDelay HCPerfIntervalCount, g9981PortPm1DayIntervalDnDiffDelay HCPerfIntervalCount,
gBondAtmPortPm1DayIntervalValid TruthValue g9981PortPm1DayIntervalValid TruthValue
} }
gBondAtmPortPm1DayIntervalIndex OBJECT-TYPE g9981PortPm1DayIntervalIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..7) SYNTAX Unsigned32 (1..7)
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Performance Data Interval number. 1 is the most recent previous "Performance Data Interval number. 1 is the most recent previous
interval; interval 7 is 24 hours ago. interval; interval 7 is 24 hours ago.
Intervals 2..7 are OPTIONAL. Intervals 2..7 are OPTIONAL.
This object partially maps to the TR-159 attribute This object partially maps to the TR-159 attribute
aGroupPerf1DayIntervalNumber." aGroupPerf1DayIntervalNumber."
REFERENCE REFERENCE
"[TR-159] 5.5.1.62" "[TR-159] 5.5.1.62"
::= { gBondAtmPortPm1DayEntry 1 } ::= { g9981PortPm1DayEntry 1 }
gBondAtmPortPm1DayIntervalMoniTime OBJECT-TYPE g9981PortPm1DayIntervalMoniTime OBJECT-TYPE
SYNTAX HCPerfTimeElapsed SYNTAX HCPerfTimeElapsed
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A count of seconds over which the performance data was actually "A count of seconds over which the performance data was actually
monitored. This value will be the same as the interval duration monitored. This value will be the same as the interval duration
(86400 seconds), except in a situation where performance data (86400 seconds), except in a situation where performance data
could not be collected for any reason. could not be collected for any reason.
This object partially maps to the TR-159 attribute This object partially maps to the TR-159 attribute
aGroupPerf1DayIntervalMoniSecs." aGroupPerf1DayIntervalMoniSecs."
REFERENCE REFERENCE
"[TR-159] 5.5.1.64" "[TR-159] 5.5.1.64"
::= { gBondAtmPortPm1DayEntry 2 } ::= { g9981PortPm1DayEntry 2 }
gBondAtmPortPm1DayIntervalRxLostCells OBJECT-TYPE g9981PortPm1DayIntervalRxLostCells OBJECT-TYPE
SYNTAX HCPerfIntervalCount SYNTAX HCPerfIntervalCount
UNITS "cells" UNITS "cells"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A count of lost ATM cells detected by the G.Bond/ATM port "A count of lost ATM cells detected by the G.Bond/ATM port
(e.g. GBS-C), during the 1-day performance history interval. (e.g. GBS-C), during the 1-day performance history interval.
This object is inhibited during Severely Errored Seconds (SES) This object is inhibited during Severely Errored Seconds (SES)
and Unavailable Seconds (UAS)." and Unavailable Seconds (UAS)."
::= { gBondAtmPortPm1DayEntry 3 } ::= { g9981PortPm1DayEntry 3 }
gBondAtmPortPm1DayIntervalTxLostCells OBJECT-TYPE g9981PortPm1DayIntervalTxLostCells OBJECT-TYPE
SYNTAX HCPerfIntervalCount SYNTAX HCPerfIntervalCount
UNITS "cells" UNITS "cells"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A count of lost ATM cells detected by the peer G.Bond/ATM port "A count of lost ATM cells detected by the peer G.Bond/ATM port
(e.g. by GBS-R for GBS-C), during the 1-day performance history (e.g. by GBS-R for GBS-C), during the 1-day performance history
interval. interval.
This object is inhibited during Unavailable Seconds (UAS)." This object is inhibited during Unavailable Seconds (UAS)."
::= { gBondAtmPortPm1DayEntry 4 } ::= { g9981PortPm1DayEntry 4 }
gBondAtmPortPm1DayIntervalUpDiffDelay OBJECT-TYPE g9981PortPm1DayIntervalUpDiffDelay OBJECT-TYPE
SYNTAX HCPerfIntervalCount SYNTAX HCPerfIntervalCount
UNITS "0.1 ms" UNITS "0.1 ms"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only value specifying maximum upstream differential "A read-only value specifying maximum upstream differential
delay between all operational BCEs in the GBS-C, measured in delay between all operational BCEs in the GBS-C, measured in
units of 0.1 ms, during the 1-day performance history interval. units of 0.1 ms, during the 1-day performance history interval.
This object is inhibited during Unavailable Seconds (UAS)." This object is inhibited during Unavailable Seconds (UAS)."
::= { gBondAtmPortPm1DayEntry 5 } ::= { g9981PortPm1DayEntry 5 }
gBondAtmPortPm1DayIntervalDnDiffDelay OBJECT-TYPE g9981PortPm1DayIntervalDnDiffDelay OBJECT-TYPE
SYNTAX HCPerfIntervalCount SYNTAX HCPerfIntervalCount
UNITS "0.1 ms" UNITS "0.1 ms"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only value specifying maximum downstream differential "A read-only value specifying maximum downstream differential
delay between all operational BCEs in the GBS-C, measured in delay between all operational BCEs in the GBS-C, measured in
units of 0.1 ms, during the 1-day performance history interval. units of 0.1 ms, during the 1-day performance history interval.
This object is inhibited during Unavailable Seconds (UAS)." This object is inhibited during Unavailable Seconds (UAS)."
::= { gBondAtmPortPm1DayEntry 6 } ::= { g9981PortPm1DayEntry 6 }
gBondAtmPortPm1DayIntervalValid OBJECT-TYPE g9981PortPm1DayIntervalValid OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only object indicating whether or not this history "A read-only object indicating whether or not this history
bucket contains valid data. Valid bucket is reported as true(1) bucket contains valid data. Valid bucket is reported as true(1)
and invalid bucket as false(2). and invalid bucket as false(2).
If this history bucket is invalid the BTU MUST NOT produce If this history bucket is invalid the BTU MUST NOT produce
notifications based upon the value of the counters in this notifications based upon the value of the counters in this
bucket. bucket.
Note that an implementation may decide not to store invalid Note that an implementation may decide not to store invalid
history buckets in its data base. In such case this object is history buckets in its data base. In such case this object is
not required as only valid history buckets are available while not required as only valid history buckets are available while
invalid history buckets are simply not in the data base. invalid history buckets are simply not in the data base.
This object partially maps to the TR-159 attribute This object partially maps to the TR-159 attribute
aGroupPerf1DayIntervalValid." aGroupPerf1DayIntervalValid."
REFERENCE REFERENCE
"[TR-159] 5.5.1.63" "[TR-159] 5.5.1.63"
::= { gBondAtmPortPm1DayEntry 7 } ::= { g9981PortPm1DayEntry 7 }
-- --
-- Conformance Statements -- Conformance Statements
-- --
gBondAtmGroups OBJECT IDENTIFIER g9981Groups OBJECT IDENTIFIER
::= { gBondAtmConformance 1 } ::= { g9981Conformance 1 }
gBondAtmCompliances OBJECT IDENTIFIER g9981Compliances OBJECT IDENTIFIER
::= { gBondAtmConformance 2 } ::= { g9981Conformance 2 }
-- Object Groups -- Object Groups
gBondAtmBasicGroup OBJECT-GROUP g9981BasicGroup OBJECT-GROUP
OBJECTS { OBJECTS {
gBondAtmPortStatRxLostCells, g9981PortStatRxLostCells,
gBondAtmPortStatTxLostCells, g9981PortStatTxLostCells,
gBondAtmPortStatMaxUpDiffDelay, g9981PortStatMaxUpDiffDelay,
gBondAtmPortStatMaxDnDiffDelay g9981PortStatMaxDnDiffDelay
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A collection of objects representing management information "A collection of objects representing management information
for a G.Bond/ATM port." for a G.Bond/ATM port."
::= { gBondAtmGroups 1 } ::= { g9981Groups 1 }
gBondAtmAlarmConfGroup OBJECT-GROUP g9981AlarmConfGroup OBJECT-GROUP
OBJECTS { OBJECTS {
gBondAtmPortConfUpDiffDelayTolerance, g9981PortConfUpDiffDelayTolerance,
gBondAtmPortConfDnDiffDelayTolerance, g9981PortConfDnDiffDelayTolerance,
gBondAtmPortConfDiffDelayToleranceExceededEnable g9981PortConfDiffDelayToleranceExceededEnable
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A collection of objects required for configuration of alarm "A collection of objects required for configuration of alarm
thresholds and notifications in G.Bond/ATM ports." thresholds and notifications in G.Bond/ATM ports."
::= { gBondAtmGroups 2 } ::= { g9981Groups 2 }
gBondAtmNotificationGroup NOTIFICATION-GROUP g9981NotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS { NOTIFICATIONS {
gBondAtmUpDiffDelayToleranceExceeded, g9981UpDiffDelayToleranceExceeded,
gBondAtmDnDiffDelayToleranceExceeded g9981DnDiffDelayToleranceExceeded
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This group supports notifications of significant conditions "This group supports notifications of significant conditions
associated with G.Bond/ATM ports." associated with G.Bond/ATM ports."
::= { gBondAtmGroups 3 } ::= { g9981Groups 3 }
gBondAtmPerfCurrGroup OBJECT-GROUP g9981PerfCurrGroup OBJECT-GROUP
OBJECTS { OBJECTS {
gBondAtmPortPmCur15MinValidIntervals, g9981PortPmCur15MinValidIntervals,
gBondAtmPortPmCur15MinInvalidIntervals, g9981PortPmCur15MinInvalidIntervals,
gBondAtmPortPmCur15MinTimeElapsed, g9981PortPmCur15MinTimeElapsed,
gBondAtmPortPmCur15MinRxLostCells, g9981PortPmCur15MinRxLostCells,
gBondAtmPortPmCur15MinTxLostCells, g9981PortPmCur15MinTxLostCells,
gBondAtmPortPmCur15MinUpDiffDelay, g9981PortPmCur15MinUpDiffDelay,
gBondAtmPortPmCur15MinDnDiffDelay, g9981PortPmCur15MinDnDiffDelay,
gBondAtmPortPmCur1DayValidIntervals, g9981PortPmCur1DayValidIntervals,
gBondAtmPortPmCur1DayInvalidIntervals, g9981PortPmCur1DayInvalidIntervals,
gBondAtmPortPmCur1DayTimeElapsed, g9981PortPmCur1DayTimeElapsed,
gBondAtmPortPmCur1DayRxLostCells, g9981PortPmCur1DayRxLostCells,
gBondAtmPortPmCur1DayTxLostCells, g9981PortPmCur1DayTxLostCells,
gBondAtmPortPmCur1DayUpDiffDelay, g9981PortPmCur1DayUpDiffDelay,
gBondAtmPortPmCur1DayDnDiffDelay g9981PortPmCur1DayDnDiffDelay
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A collection of objects supporting OPTIONAL current Performance "A collection of objects supporting OPTIONAL current Performance
Monitoring information for G.Bond/ATM ports." Monitoring information for G.Bond/ATM ports."
::= { gBondAtmGroups 4 } ::= { g9981Groups 4 }
gBondAtmPerf15MinGroup OBJECT-GROUP g9981Perf15MinGroup OBJECT-GROUP
OBJECTS { OBJECTS {
gBondAtmPortPm15MinIntervalMoniTime, g9981PortPm15MinIntervalMoniTime,
gBondAtmPortPm15MinIntervalRxLostCells, g9981PortPm15MinIntervalRxLostCells,
gBondAtmPortPm15MinIntervalTxLostCells, g9981PortPm15MinIntervalTxLostCells,
gBondAtmPortPm15MinIntervalUpDiffDelay, g9981PortPm15MinIntervalUpDiffDelay,
gBondAtmPortPm15MinIntervalDnDiffDelay, g9981PortPm15MinIntervalDnDiffDelay,
gBondAtmPortPm15MinIntervalValid g9981PortPm15MinIntervalValid
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A collection of objects supporting OPTIONAL historical "A collection of objects supporting OPTIONAL historical
Performance Monitoring information for G.Bond/ATM ports, during Performance Monitoring information for G.Bond/ATM ports, during
previous 15-minute intervals ." previous 15-minute intervals ."
::= { gBondAtmGroups 5 } ::= { g9981Groups 5 }
gBondAtmPerf1DayGroup OBJECT-GROUP g9981Perf1DayGroup OBJECT-GROUP
OBJECTS { OBJECTS {
gBondAtmPortPm1DayIntervalMoniTime, g9981PortPm1DayIntervalMoniTime,
gBondAtmPortPm1DayIntervalRxLostCells, g9981PortPm1DayIntervalRxLostCells,
gBondAtmPortPm1DayIntervalTxLostCells, g9981PortPm1DayIntervalTxLostCells,
gBondAtmPortPm1DayIntervalUpDiffDelay, g9981PortPm1DayIntervalUpDiffDelay,
gBondAtmPortPm1DayIntervalDnDiffDelay, g9981PortPm1DayIntervalDnDiffDelay,
gBondAtmPortPm1DayIntervalValid g9981PortPm1DayIntervalValid
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A collection of objects supporting OPTIONAL historical "A collection of objects supporting OPTIONAL historical
Performance Monitoring information for G.Bond/ATM ports, during Performance Monitoring information for G.Bond/ATM ports, during
previous 1-day intervals ." previous 1-day intervals ."
::= { gBondAtmGroups 6 } ::= { g9981Groups 6 }
-- Compliance Statements -- Compliance Statements
gBondAtmCompliance MODULE-COMPLIANCE g9981Compliance MODULE-COMPLIANCE
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The compliance statement for G.Bond/ATM interfaces. "The compliance statement for G.Bond/ATM interfaces.
Compliance with the following external compliance statements Compliance with the following external compliance statements
is REQUIRED: is REQUIRED:
MIB Module Compliance Statement MIB Module Compliance Statement
---------- -------------------- ---------- --------------------
IF-MIB ifCompliance3 IF-MIB ifCompliance3
GBOND-MIB gBondCompliance" GBOND-MIB gBondCompliance"
MODULE -- this module MODULE -- this module
MANDATORY-GROUPS { MANDATORY-GROUPS {
gBondAtmBasicGroup, g9981BasicGroup,
gBondAtmAlarmConfGroup, g9981AlarmConfGroup,
gBondAtmNotificationGroup g9981NotificationGroup
} }
GROUP gBondAtmPerfCurrGroup GROUP g9981PerfCurrGroup
DESCRIPTION DESCRIPTION
"Support for this group is only required for implementations "Support for this group is only required for implementations
supporting Performance Monitoring." supporting Performance Monitoring."
GROUP gBondAtmPerf15MinGroup GROUP g9981Perf15MinGroup
DESCRIPTION DESCRIPTION
"Support for this group is only required for implementations "Support for this group is only required for implementations
supporting historical Performance Monitoring." supporting historical Performance Monitoring."
GROUP gBondAtmPerf1DayGroup GROUP g9981Perf1DayGroup
DESCRIPTION DESCRIPTION
"Support for this group is only required for implementations "Support for this group is only required for implementations
supporting 1-day historical Performance Monitoring." supporting 1-day historical Performance Monitoring."
::= { gBondAtmCompliances 1 } ::= { g9981Compliances 1 }
END END
7. Security Considerations 7. Security Considerations
There is a number of managed objects defined in this MIB module with There is a number of managed objects defined in this MIB module with
a MAX-ACCESS clause of read-write. Such objects may be considered a MAX-ACCESS clause of read-write. Such objects may be considered
sensitive or vulnerable in some network environments. The support sensitive or vulnerable in some network environments. The support
for SET operations in a non-secure environment without proper for SET operations in a non-secure environment without proper
protection can have a negative effect on network operations. These protection can have a negative effect on network operations. These
are the tables and objects and their sensitivity/vulnerability: are the tables and objects and their sensitivity/vulnerability:
o Changing of gBondAtmPortConfTable configuration parameters MAY o Changing of g9981PortConfTable configuration parameters MAY lead
lead to a potential Service Level Agreement (SLA) breach, for to a potential Service Level Agreement (SLA) breach, for example
example if a traffic delay is increased as a result of the higher if a traffic delay is increased as a result of the higher delay
delay tolerance (increased gBondAtmPortConfUpDiffDelayTolerance tolerance (increased g9981PortConfUpDiffDelayTolerance and/or
and/or gBondAtmPortConfDnDiffDelayTolerance), or the differential g9981PortConfDnDiffDelayTolerance), or the differential delay
delay tolerance notifications are disabled by manipulating the tolerance notifications are disabled by manipulating the
gBondAtmPortConfDiffDelayToleranceExceededEnable parameter. g9981PortConfDiffDelayToleranceExceededEnable parameter.
Some of the readable objects in this MIB module (i.e., those with Some of the readable objects in this MIB module (i.e., those with
MAX-ACCESS other than not-accessible) may be considered sensitive or MAX-ACCESS other than not-accessible) may be considered sensitive or
vulnerable in some network environments since, collectively, they vulnerable in some network environments since, collectively, they
provide information about the performance of network interfaces and provide information about the performance of network interfaces and
can reveal some aspects of their configuration. can reveal some aspects of their configuration.
It is thus important to control even GET and/or NOTIFY access to It is thus important to control even GET and/or NOTIFY access to
these objects and possibly even encrypt the values of these objects these objects and possibly even encrypt the values of these objects
when sending them over the network via SNMP. when sending them over the network via SNMP.
skipping to change at page 31, line 7 skipping to change at page 31, line 7
Further, deployment of SNMP versions prior to SNMPv3 is NOT Further, deployment of SNMP versions prior to SNMPv3 is NOT
RECOMMENDED. Instead, it is RECOMMENDED to deploy SNMPv3 and to RECOMMENDED. Instead, it is RECOMMENDED to deploy SNMPv3 and to
enable cryptographic security. It is then a customer/operator enable cryptographic security. It is then a customer/operator
responsibility to ensure that the SNMP entity giving access to an responsibility to ensure that the SNMP entity giving access to an
instance of this MIB module is properly configured to give access to instance of this MIB module is properly configured to give access to
the objects only to those principals (users) that have legitimate the objects only to those principals (users) that have legitimate
rights to indeed GET or SET (change/create/delete) them. rights to indeed GET or SET (change/create/delete) them.
8. IANA Considerations 8. IANA Considerations
An object identifier for gBondAtmMIB MODULE-IDENTITY SHALL be An object identifier for g9981MIB MODULE-IDENTITY SHALL be allocated
allocated by IANA [1] in the MIB-2 transmission sub-tree, before this by IANA [1] in the MIB-2 transmission sub-tree, before this document
document is published as an RFC. is published as an RFC.
9. Acknowledgments 9. Acknowledgments
This document was produced by the [ADSLMIB] working group. This document was produced by the [ADSLMIB] working group.
Special thanks to Dan Romascanu for his meticulous review of this
text.
10. References 10. References
10.1. Normative References 10.1. Normative References
[G.998.1] ITU-T, "ATM-based multi-pair bonding", [G.998.1] ITU-T, "ATM-based multi-pair bonding",
ITU-T Recommendation G.998.3, ITU-T Recommendation G.998.3,
January 2005. January 2005.
[I-D.ietf-adslmib-gbond-mib] Beili, E. and M. Morgenstern, "xDSL [I-D.ietf-adslmib-gbond-mib] Beili, E. and M. Morgenstern, "xDSL
multi-pair bonding (G.Bond) MIB", multi-pair bonding (G.Bond) MIB",
draft-ietf-adslmib-gbond-mib-08 (work draft-ietf-adslmib-gbond-mib-10 (work
in progress), February 2012. in progress), March 2012.
[RFC2119] Bradner, S., "Key words for use in RFCs [RFC2119] Bradner, S., "Key words for use in RFCs
to Indicate Requirement Levels", to Indicate Requirement Levels",
BCP 14, RFC 2119, March 1997. BCP 14, RFC 2119, March 1997.
[RFC2578] McCloghrie, K., Ed., Perkins, D., Ed., [RFC2578] McCloghrie, K., Ed., Perkins, D., Ed.,
and J. Schoenwaelder, Ed., "Structure and J. Schoenwaelder, Ed., "Structure
of Management Information Version 2 of Management Information Version 2
(SMIv2)", STD 58, RFC 2578, April 1999. (SMIv2)", STD 58, RFC 2578, April 1999.
skipping to change at page 31, line 51 skipping to change at page 32, line 5
[RFC2580] McCloghrie, K., Perkins, D., and J. [RFC2580] McCloghrie, K., Perkins, D., and J.
Schoenwaelder, "Conformance Statements Schoenwaelder, "Conformance Statements
for SMIv2", STD 58, RFC 2580, for SMIv2", STD 58, RFC 2580,
April 1999. April 1999.
[RFC2863] McCloghrie, K. and F. Kastenholz, "The [RFC2863] McCloghrie, K. and F. Kastenholz, "The
Interfaces Group MIB", RFC 2863, Interfaces Group MIB", RFC 2863,
June 2000. June 2000.
[RFC3414] Blumenthal, U. and B. Wijnen, "User-
based Security Model (USM) for version
3 of the Simple Network Management
Protocol (SNMPv3)", STD 62, RFC 3414,
December 2002.
[RFC3705] Ray, B. and R. Abbi, "High Capacity [RFC3705] Ray, B. and R. Abbi, "High Capacity
Textual Conventions for MIB Modules Textual Conventions for MIB Modules
Using Performance History Based on 15 Using Performance History Based on 15
Minute Intervals", RFC 3705, Minute Intervals", RFC 3705,
February 2004. February 2004.
[RFC3826] Blumenthal, U., Maino, F., and K.
McCloghrie, "The Advanced Encryption
Standard (AES) Cipher Algorithm in the
SNMP User-based Security Model",
RFC 3826, June 2004.
[TR-159] Beili, E. and M. Morgenstern, [TR-159] Beili, E. and M. Morgenstern,
"Management Framework for xDSL "Management Framework for xDSL
Bonding", Broadband Forum technical Bonding", Broadband Forum technical
report TR-159, December 2008. report TR-159, December 2008.
10.2. Informative References 10.2. Informative References
[ADSLMIB] IETF, "ADSL MIB (adslmib) Charter", <ht [ADSLMIB] IETF, "ADSL MIB (adslmib) Charter", <ht
tp://www.ietf.org/html.charters/ tp://www.ietf.org/html.charters/
adslmib-charter.html>. adslmib-charter.html>.
skipping to change at page 32, line 29 skipping to change at page 32, line 44
[RFC2515] Tesink, K., "Definitions of Managed [RFC2515] Tesink, K., "Definitions of Managed
Objects for ATM Management", RFC 2515, Objects for ATM Management", RFC 2515,
February 1999. February 1999.
[RFC3410] Case, J., Mundy, R., Partain, D., and [RFC3410] Case, J., Mundy, R., Partain, D., and
B. Stewart, "Introduction and B. Stewart, "Introduction and
Applicability Statements for Internet- Applicability Statements for Internet-
Standard Management Framework", Standard Management Framework",
RFC 3410, December 2002. RFC 3410, December 2002.
[RFC3414] Blumenthal, U. and B. Wijnen, "User-
based Security Model (USM) for version
3 of the Simple Network Management
Protocol (SNMPv3)", STD 62, RFC 3414,
December 2002.
[RFC3593] Tesink, K., "Textual Conventions for [RFC3593] Tesink, K., "Textual Conventions for
MIB Modules Using Performance History MIB Modules Using Performance History
Based on 15 Minute Intervals", Based on 15 Minute Intervals",
RFC 3593, September 2003. RFC 3593, September 2003.
[RFC3826] Blumenthal, U., Maino, F., and K.
McCloghrie, "The Advanced Encryption
Standard (AES) Cipher Algorithm in the
SNMP User-based Security Model",
RFC 3826, June 2004.
[RFC4181] Heard, C., "Guidelines for Authors and [RFC4181] Heard, C., "Guidelines for Authors and
Reviewers of MIB Documents", BCP 111, Reviewers of MIB Documents", BCP 111,
RFC 4181, September 2005. RFC 4181, September 2005.
[RFC5591] Harrington, D. and W. Hardaker, [RFC5591] Harrington, D. and W. Hardaker,
"Transport Security Model for the "Transport Security Model for the
Simple Network Management Protocol Simple Network Management Protocol
(SNMP)", RFC 5591, June 2009. (SNMP)", RFC 5591, June 2009.
[RFC5592] Harrington, D., Salowey, J., and W. [RFC5592] Harrington, D., Salowey, J., and W.
 End of changes. 171 change blocks. 
304 lines changed or deleted 306 lines changed or added

This html diff was produced by rfcdiff 1.41. The latest version is available from http://tools.ietf.org/tools/rfcdiff/