draft-ietf-adslmib-gbond-mib-07.txt   draft-ietf-adslmib-gbond-mib-08.txt 
Network Working Group E. Beili Network Working Group E. Beili
Internet-Draft Actelis Networks Internet-Draft Actelis Networks
Intended status: Standards Track M. Morgenstern Intended status: Standards Track M. Morgenstern
Expires: November 27, 2011 ECI Telecom Expires: August 4, 2012 ECI Telecom
May 26, 2011 Feb 01, 2012
xDSL multi-pair bonding (G.Bond) MIB xDSL multi-pair bonding (G.Bond) MIB
draft-ietf-adslmib-gbond-mib-07.txt draft-ietf-adslmib-gbond-mib-08.txt
Abstract Abstract
This document defines Management Information Base (MIB) module for This document defines Management Information Base (MIB) module for
use with network management protocols in TCP/IP-based internets. use with network management protocols in TCP/IP-based internets.
This document proposes an extension to the Interfaces Group MIB with This document proposes an extension to the Interfaces Group MIB with
a set of common objects for managing multi-pair bonded Digital a set of common objects for managing multi-pair bonded Digital
Subscriber Line (xDSL) interfaces, defined in ITU-T recommendations Subscriber Line (xDSL) interfaces, defined in ITU-T recommendations
G.998.1, G.998.2 and G.998.3. The MIB modules specific to each G.998.1, G.998.2 and G.998.3. The MIB modules specific to each
bonding technology are defined in GBOND-ATM-MIB, GBOND-ETH-MIB and bonding technology are defined in GBOND-ATM-MIB, GBOND-ETH-MIB and
skipping to change at page 1, line 38 skipping to change at page 1, line 38
Internet-Drafts are working documents of the Internet Engineering Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet- working documents as Internet-Drafts. The list of current Internet-
Drafts is at http://datatracker.ietf.org/drafts/current/. Drafts is at http://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress." material or to cite them other than as "work in progress."
This Internet-Draft will expire on November 27, 2011. This Internet-Draft will expire on August 4, 2012.
Copyright Notice Copyright Notice
Copyright (c) 2011 IETF Trust and the persons identified as the Copyright (c) 2012 IETF Trust and the persons identified as the
document authors. All rights reserved. document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info) in effect on the date of (http://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as the Trust Legal Provisions and are provided without warranty as
skipping to change at page 2, line 27 skipping to change at page 2, line 27
4.1.2. xDSL Bonding . . . . . . . . . . . . . . . . . . . . . 7 4.1.2. xDSL Bonding . . . . . . . . . . . . . . . . . . . . . 7
4.1.3. Discovery Operation . . . . . . . . . . . . . . . . . 7 4.1.3. Discovery Operation . . . . . . . . . . . . . . . . . 7
4.1.4. G.Bond ports initialization . . . . . . . . . . . . . 9 4.1.4. G.Bond ports initialization . . . . . . . . . . . . . 9
4.1.5. Usage of ifTable . . . . . . . . . . . . . . . . . . . 10 4.1.5. Usage of ifTable . . . . . . . . . . . . . . . . . . . 10
4.2. Relationship to G.Bond ATM, ETH and TDIM MIB modules . . . 11 4.2. Relationship to G.Bond ATM, ETH and TDIM MIB modules . . . 11
4.3. Relationship to xDSL MIB modules . . . . . . . . . . . . . 11 4.3. Relationship to xDSL MIB modules . . . . . . . . . . . . . 11
5. MIB Structure . . . . . . . . . . . . . . . . . . . . . . . . 12 5. MIB Structure . . . . . . . . . . . . . . . . . . . . . . . . 12
5.1. Overview . . . . . . . . . . . . . . . . . . . . . . . . . 12 5.1. Overview . . . . . . . . . . . . . . . . . . . . . . . . . 12
5.2. Performance Monitoring . . . . . . . . . . . . . . . . . . 12 5.2. Performance Monitoring . . . . . . . . . . . . . . . . . . 12
5.3. Mapping of DSL Forum TR-159 Managed Objects . . . . . . . 12 5.3. Mapping of DSL Forum TR-159 Managed Objects . . . . . . . 12
6. xDSL Multi-pair Bonding MIB Definitions . . . . . . . . . . . 16 6. xDSL Multi-pair Bonding MIB Definitions . . . . . . . . . . . 17
7. Security Considerations . . . . . . . . . . . . . . . . . . . 60 7. Security Considerations . . . . . . . . . . . . . . . . . . . 60
8. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 61 8. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 62
9. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . 62 9. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . 62
10. References . . . . . . . . . . . . . . . . . . . . . . . . . . 62 10. References . . . . . . . . . . . . . . . . . . . . . . . . . . 62
10.1. Normative References . . . . . . . . . . . . . . . . . . . 62 10.1. Normative References . . . . . . . . . . . . . . . . . . . 62
10.2. Informative References . . . . . . . . . . . . . . . . . . 63 10.2. Informative References . . . . . . . . . . . . . . . . . . 63
1. Introduction 1. Introduction
The xDSL Multi-Pair Bonding, allows a service provider to provide The xDSL Multi-Pair Bonding, allows a service provider to provide
high bandwidth services to business and residential customers over high bandwidth services to business and residential customers over
multiple xDSL lines, with greater speed and resiliency, than the multiple xDSL lines, with greater speed and resiliency, than the
skipping to change at page 3, line 46 skipping to change at page 3, line 46
(TDIM), specified in ITU-T G.998.3 recommendation [G.998.3], which (TDIM), specified in ITU-T G.998.3 recommendation [G.998.3], which
defines a method for bonding (or aggregating) of multiple xDSL defines a method for bonding (or aggregating) of multiple xDSL
lines into a single bi-directional logical link carrying a mix of lines into a single bi-directional logical link carrying a mix of
various traffic streams (e.g., Ethernet, ATM, TDM). various traffic streams (e.g., Ethernet, ATM, TDM).
Architecturally all three bonding schemes define a new "bonded" Architecturally all three bonding schemes define a new "bonded"
Transport Protocol Specific - Transmission Convergence (TPS-TC) sub- Transport Protocol Specific - Transmission Convergence (TPS-TC) sub-
layer, stacked above multiple ATM-TC, Ethernet/PTM-TC or STM-TC layer, stacked above multiple ATM-TC, Ethernet/PTM-TC or STM-TC
(clear channel) sub-layers for the ATM, Ethernet or TDIM bonding (clear channel) sub-layers for the ATM, Ethernet or TDIM bonding
respectively. Each underlying TPS-TC sub-layer represents a protocol respectively. Each underlying TPS-TC sub-layer represents a protocol
specific gamma-interface to an xDSL line or an individual bearer specific interface to an xDSL line or an individual bearer channel of
channel of an xDSL line. Bonding of multiple bearer channels in the an xDSL line. Bonding of multiple bearer channels in the same xDSL
same xDSL line is not allowed. line is not allowed.
All schemes allow bonding of up to 32 individual line/channel sub- All schemes allow bonding of up to 32 individual line/channel sub-
layers with variable rates, providing common functionality for the layers with variable rates, providing common functionality for the
configuration, initialization, operation and monitoring of the bonded configuration, initialization, operation and monitoring of the bonded
link. link.
This document defines a MIB module common to all 3 schemes. This document defines a MIB module common to all 3 schemes.
Additional managed objects, specific to each bonding technology, are Additional managed objects, specific to each bonding technology, are
defined in GBOND-ATM-MIB [I-D.ietf-adslmib-gbond-atm-mib], GBOND-ETH- defined in GBOND-ATM-MIB [I-D.ietf-adslmib-gbond-atm-mib], GBOND-ETH-
MIB [I-D.ietf-adslmib-gbond-eth-mib] and GBOND-TDIM-MIB MIB [I-D.ietf-adslmib-gbond-eth-mib] and GBOND-TDIM-MIB
skipping to change at page 5, line 37 skipping to change at page 5, line 37
Generic Bonded Sub-layer (GBS) and to the channel sub-layer as Generic Bonded Sub-layer (GBS) and to the channel sub-layer as
Bonding Channel Entity (BCE). Bonding Channel Entity (BCE).
A generic G.Bond device can have a number of GBS ports, each A generic G.Bond device can have a number of GBS ports, each
connected to a particular upper layer (e.g., Media Access Control connected to a particular upper layer (e.g., Media Access Control
(MAC) interface for G.998.2 scheme), while simultaneously cross- (MAC) interface for G.998.2 scheme), while simultaneously cross-
connected to a number of underlying BCEs, with a single GBS per BCE connected to a number of underlying BCEs, with a single GBS per BCE
relationship. relationship.
A GBS port is represented in the Interface table (ifTable) as a A GBS port is represented in the Interface table (ifTable) as a
separate interface with an ifType of g9981, g9982 or g9983 for a separate interface with an ifType of g9981(263), g9982(264) or
particular bonding scheme. g9983(265) for a particular bonding scheme.
Each BCE in the aggregated GBS port is represented in the ifTable as Each BCE in the aggregated GBS port is represented in the ifTable as
a separate interface with an ifType relevant to a particular xDSL a separate interface with an ifType relevant to a particular xDSL
technology, e.g., shdsl(169) or vdsl(97). The ifType values are technology, e.g., shdsl(169) or vdsl(97). The ifType values are
defined in [IANAifType-MIB]. defined in [IANAifType-MIB].
The following figure shows the layering diagram and corresponding use The following figure shows the layering diagram and corresponding use
of ifTable for the bonded xDSL interfaces: of ifTable for the bonded xDSL interfaces:
.-----------------------------. - .-----------------------------. -
| GBS | ^ 1 ifEntry | GBS | ^ 1 ifEntry
| (TPS-TC) | v ifType: g9981, g9982 or g9983 | (TPS-TC) | v ifType: g9981(263), g9982(264)
+-----------------+---+-------+ - +-----------------+---+-------+ - or g9983(265)
| TPS-TC \ | | | ^ | TPS-TC \ | | | ^
+---------\ | | | | N ifEntry (N=1..32) +---------\ | | | | N ifEntry (N=1..32)
| PMS-TC )BCE 1 |...| BCE N | ) ifType: adsl(94), shdsl(169), | PMS-TC )BCE 1 |...| BCE N | ) ifType: adsl(94), shdsl(169),
+---------/ | | | | vdsl(97), vdsl2(251), +---------/ | | | | vdsl(97), vdsl2(251),
| PMD / | | | v etc. | PMD / | | | v etc.
'-----------------+---+-------' - '-----------------+---+-------' -
BCE - Bonding Channel Entity BCE - Bonding Channel Entity
GBS - Generic Bonded Sub-layer GBS - Generic Bonded Sub-layer
PMD - Physical Medium Dependent PMD - Physical Medium Dependent
TPS-TC - Transport Protocol Specific - Transmission Convergence TPS-TC - Transport Protocol Specific - Transmission Convergence
PMS-TC - Physical Media Specific - Transmission Convergence PMS-TC - Physical Media Specific - Transmission Convergence
Figure 1: Use of ifTable for bonded xDSL interfaces Figure 1: Use of ifTable for bonded xDSL interfaces
The ifStackTable is indexed by the ifIndex values of the aggregated The ifStackTable is indexed by the ifIndex values of the aggregated
G.Bond port (GBS) and the BCEs connected to it. ifStackTable allows a G.Bond port (GBS) and the BCEs connected to it. ifStackTable allows a
Network Management application to determine which BCEs are connected Network Management application to determine which BCEs are connected
to a particular GBS and change connections (if supported by the to a particular GBS and change connections (if supported by the
application). The ifInvStackTable, being an inverted version of the application). The ifInvStackTable, being an inverted version of the
ifStackTable, provides an efficient means for a Network Management ifStackTable, provides an efficient means for a Network Management
application to read a subset of the ifStackTable and thereby application to read a subset of the ifStackTable and thereby
skipping to change at page 6, line 49 skipping to change at page 6, line 49
to that higher-layer interface, determined by the cross-connect to that higher-layer interface, determined by the cross-connect
capability of the device. This table, modeled after ifStackTable, is capability of the device. This table, modeled after ifStackTable, is
read only, reflecting current cross-connect capability of a stacked read only, reflecting current cross-connect capability of a stacked
interface, which can be dynamic in some implementations (e.g., if interface, which can be dynamic in some implementations (e.g., if
xDSL lines are located on a pluggable module and the module is pulled xDSL lines are located on a pluggable module and the module is pulled
out). Note that BCE availability per GBS, described by out). Note that BCE availability per GBS, described by
ifCapStackTable, can be constrained by other parameters, for example ifCapStackTable, can be constrained by other parameters, for example
by aggregation capacity of a GBS or by the BCE in question being by aggregation capacity of a GBS or by the BCE in question being
already connected to another GBS. So, in order to ensure that a already connected to another GBS. So, in order to ensure that a
particular BCE can be connected to the GBS, all respective parameters particular BCE can be connected to the GBS, all respective parameters
(e.g., ifCapStackTable, ifStackTable and gBondCapacity) SHALL be (e.g., ifCapStackTable, ifStackTable and gBondPortCapCapacity) SHALL
inspected. be inspected.
The ifInvCapStackTable, also defined in the IF-CAP-STACK-MIB module, The ifInvCapStackTable, also defined in the IF-CAP-STACK-MIB module,
describes which higher-layer interfaces (e.g., GBS ports) can describes which higher-layer interfaces (e.g., GBS ports) can
possibly be connected to a particular lower-layer interface (e.g., possibly be connected to a particular lower-layer interface (e.g.,
BCE), providing inverted mapping of ifCapStackTable. While it BCE), providing inverted mapping of ifCapStackTable. While it
contains no additional information beyond that already contained in contains no additional information beyond that already contained in
the ifCapStackTable, the ifInvCapStackTable has the ifIndex values in the ifCapStackTable, the ifInvCapStackTable has the ifIndex values in
its INDEX clause in the reverse order, i.e., the lower-layer its INDEX clause in the reverse order, i.e., the lower-layer
interface first, and the higher-layer interface second, providing interface first, and the higher-layer interface second, providing
efficient means for a Network Management application to read a subset efficient means for a Network Management application to read a subset
skipping to change at page 7, line 28 skipping to change at page 7, line 28
single logical GBS port, by splitting the incoming traffic into single logical GBS port, by splitting the incoming traffic into
multiple streams, transmitting each stream over a specific BCE and multiple streams, transmitting each stream over a specific BCE and
combining the streams at the remote GBS port, preserving the original combining the streams at the remote GBS port, preserving the original
traffic order. traffic order.
Big Ethernet frames MAY be fragmented before the transmission and Big Ethernet frames MAY be fragmented before the transmission and
reassembled at the remote end to minimize transportation delay. reassembled at the remote end to minimize transportation delay.
The Bonding is OPTIONAL, meaning that a device with a single BCE MAY The Bonding is OPTIONAL, meaning that a device with a single BCE MAY
perform fragmentation and re-assembly if this function is supported perform fragmentation and re-assembly if this function is supported
by the device. The agent is REQUIRED to report on the Bonding by the device. The agent is REQUIRED to indicate the Bonding
capability for all types of G.Bond ports (ATM, Ethernet and TDIM). capability for all types of G.Bond ports (ATM, Ethernet and TDIM).
The GBOND-MIB module allows a Network Management application to query The GBOND-MIB module allows a Network Management application to query
Bonding capability and enable/disable it if supported. Note that Bonding capability and enable/disable it if supported. Note that
enabling Bonding effectively turns on fragmentation and re-assembly, enabling Bonding effectively turns on fragmentation and re-assembly,
even on a single-BCE port. even on a single-BCE port.
4.1.3. Discovery Operation 4.1.3. Discovery Operation
The G.Bond ports may optionally support discovery operation, whereby The G.Bond ports may optionally support discovery operation, whereby
skipping to change at page 8, line 17 skipping to change at page 8, line 17
example. Fixed BCE pre-assignment, manual assignment or auto- example. Fixed BCE pre-assignment, manual assignment or auto-
assignment using an alternative internal algorithm may be chosen by a assignment using an alternative internal algorithm may be chosen by a
particular implementation]: particular implementation]:
// Go over all GBS ports in the CO device // Go over all GBS ports in the CO device
FOREACH gbs[i] IN CO_device FOREACH gbs[i] IN CO_device
{ // Perform discovery and auto-assignment on GBS ports { // Perform discovery and auto-assignment on GBS ports
// with room for more Channels // with room for more Channels
IF ( gbs[i].NumBCEs < gbs[i].BondCapacity ) IF ( gbs[i].NumBCEs < gbs[i].BondCapacity )
{ // Assign a unique 6-octets local discovery code to the GBS { // Assign a unique 6-octets local discovery code to the GBS
// e.g., MAC address // e.g., MAC address of the associated port or some other
// unique number specifically allocated for this purpose.
dc = gbs[i].DiscoveryCode = MAC[i]; dc = gbs[i].DiscoveryCode = MAC[i];
// Go over all disconnected Channels, which can // Go over all disconnected Channels, which can
// potentially be connected to the GBS // potentially be connected to the GBS
FOREACH bce[j] IN ifCapStackTable[gbs[i]] AND FOREACH bce[j] IN ifCapStackTable[gbs[i]] AND
NOT IN ifStackTable[gbs[i]] // not connected NOT IN ifStackTable[gbs[i]] // not connected
{ // Try to grab the remote RT_device, by writing the value { // Try to grab the remote RT_device, by writing the value
// of the local 6 Byte discovery code to the remote // of the local 6 Byte discovery code to the remote
// discovery code register (via handshake mechanism). // discovery code register (via handshake mechanism).
// This operation is atomic Set-if-Clear action, i.e., it // This operation is atomic Set-if-Clear action, i.e., it
// would succeed only if the remote discovery register was // would succeed only if the remote discovery register was
skipping to change at page 9, line 23 skipping to change at page 9, line 23
} }
// At this point we have discovered all local BCEs which // At this point we have discovered all local BCEs which
// are physically connected to the same remote RT_device // are physically connected to the same remote RT_device
// and connected them to GBS[i]. Go to the next GBS. // and connected them to GBS[i]. Go to the next GBS.
BREAK; BREAK;
} }
} }
} }
An SNMP Agent for a G.Bond device builds ifCapStackTable and its An SNMP Agent for a G.Bond device builds ifCapStackTable and its
inverse ifInvCapStackTable on device initialiation, according to the inverse ifInvCapStackTable on device initialization, according to the
cross-connect capabilities of the device. cross-connect capabilities of the device.
Adding a BCE to the ifStackTable row for a specific GBS, involves Adding a BCE to the ifStackTable row for a specific GBS, involves
actual connection of the BCE to the GBS. actual connection of the BCE to the GBS.
Note that GBS port does not have to be operationally 'down' for the Note that GBS port does not have to be operationally 'down' for the
connection to succeed. In fact, a dynamic BCE addition (and removal) connection to succeed. In fact, a dynamic BCE addition (and removal)
MAY be implemented with an available BCE being initialized first (by MAY be implemented with an available BCE being initialized first (by
setting its ifAdminStatus to 'up') and then added to an operationally setting its ifAdminStatus to 'up') and then added to an operationally
'up' GBS port, by modifying a respective ifStackTable (and respective 'up' GBS port, by modifying a respective ifStackTable (and respective
ifInvStackTable) entry. ifInvStackTable) entry.
It is RECOMMENDED that a removal of the last operationally 'up' BCE It is RECOMMENDED that a removal of the last operationally 'up' BCE
from an operationally 'up' GBS would be rejected by the from an operationally 'up' GBS, i.e. modification of a respective
implementation, as this action would completely drop the link. entry in ifStackTable and a corresponding entry in ifInvStackTable,
would be rejected by the implementation (in case of SNMP with the
error inconsistentValue), as this action would completely drop the
link.
In addition to the standard handshake-based discovery described In addition to the standard handshake-based discovery described
above, [G.998.2] defines an optional frame-based discovery and pair above, [G.998.2] defines an optional frame-based discovery and pair
management. These frame-based methods are discussed in management. These frame-based methods are discussed in
[I-D.ietf-adslmib-gbond-eth-mib]. [I-D.ietf-adslmib-gbond-eth-mib].
4.1.4. G.Bond ports initialization 4.1.4. G.Bond ports initialization
G.Bond ports being built on top of xDSL technology, require a lengthy G.Bond ports being built on top of xDSL technology, require a lengthy
initialization or 'training' process, before any data can pass. initialization or 'training' process, before any data can pass.
skipping to change at page 10, line 45 skipping to change at page 10, line 50
ifGeneralInformationGroup: ifGeneralInformationGroup:
+---------------+---------------------------------------------------+ +---------------+---------------------------------------------------+
| IF-MIB object | G.Bond interpretation | | IF-MIB object | G.Bond interpretation |
+---------------+---------------------------------------------------+ +---------------+---------------------------------------------------+
| ifIndex | Interface index. Note that each BCE and each GBS | | ifIndex | Interface index. Note that each BCE and each GBS |
| | in the G.Bond PHY MUST have a unique index, as | | | in the G.Bond PHY MUST have a unique index, as |
| | there are some GBS and BCE specific attributes | | | there are some GBS and BCE specific attributes |
| | accessible only on the GBS or BCE level. | | | accessible only on the GBS or BCE level. |
+---------------+---------------------------------------------------+ +---------------+---------------------------------------------------+
| ifType | g9981, g9982 or g9982 for the ATM, Ethernet or | | ifType | g9981(263), g9982(264) or g9983(265) for the ATM, |
| | TDIM GBS respectively, shdsl(169) for G.SHDSL | | | Ethernet or TDIM GBS respectively, shdsl(169) for |
| | BCE, vdsl(97) for VDSL BCE, etc. | | | G.SHDSL BCE, vdsl(97) for VDSL BCE, etc. |
+---------------+---------------------------------------------------+
+---------------+---------------------------------------------------+
| ifSpeed | Operating data rate for the BCE. For the GBS it | | ifSpeed | Operating data rate for the BCE. For the GBS it |
| | is the sum of the current operating data rates of | | | is the sum of the current operating data rates of |
| | all BCEs in the aggregation group, without the | | | all BCEs in the aggregation group, without the |
| | encapsulation overhead and G.Bond overhead, but | | | encapsulation overhead and G.Bond overhead, but |
| | accounting for the Inter-Frame Gaps (IFG). When a | | | accounting for the Inter-Frame Gaps (IFG). When a |
| | GBS or a BCE is operating in an assymetrical | | | GBS or a BCE is operating in an asymetrical |
| | fashion (upstream data rate differs from the | | | fashion (upstream data rate differs from the |
| | downstream one) the lowest of the values is | | | downstream one) the lowest of the values is |
| | shown. | | | shown. |
+---------------+---------------------------------------------------+ +---------------+---------------------------------------------------+
| ifAdminStatus | Setting this object to 'up' instructs a | | ifAdminStatus | Setting this object to 'up' instructs a |
| | particular GBS (with all BCEs connected to it) or | | | particular GBS (with all BCEs connected to it) or |
| | a BCE to start initialization process | | | a BCE to start initialization process |
+---------------+---------------------------------------------------+ +---------------+---------------------------------------------------+
| ifOperStatus | a relevant *Status object from a particular line | | ifOperStatus | A relevant *Status object from a particular line |
| | MIB supplements the 'down' value of ifOperStatus | | | MIB supplements the value of ifOperStatus for |
| | for BCEs. | | | BCEs. gBondPortStatFltStatus supplements the |
| | value of ifOperStatus for GBS. Note that both |
| | relevant objects shall be inspected to determine |
| | the real operational status of a BCE/GBS port, |
| | e.g. a GBS port may be operationally 'up' with |
| | gBondPortStatFltStatus indicating lowRate(4) |
| | fault condition, or 'down' with no gBond faults. |
+---------------+---------------------------------------------------+ +---------------+---------------------------------------------------+
Table 1: G.Bond interpretation of IF-MIB objects Table 1: G.Bond interpretation of IF-MIB objects
4.2. Relationship to G.Bond ATM, ETH and TDIM MIB modules 4.2. Relationship to G.Bond ATM, ETH and TDIM MIB modules
This MIB module defined in this document is common to all three G.998 The MIB module defined in this document is common to all three G.998
bonding schemes. It MUST be used in conjunction with a bonding bonding schemes. It MUST be used in conjunction with a bonding
scheme-specific MIB module: scheme-specific MIB module:
o GBOND-ATM-MIB [I-D.ietf-adslmib-gbond-atm-mib] for a G.998.1 o GBOND-ATM-MIB [I-D.ietf-adslmib-gbond-atm-mib] for a G.998.1
bonded interface. bonded interface.
o GBOND-ETH-MIB [I-D.ietf-adslmib-gbond-eth-mib] for a G.998.2 o GBOND-ETH-MIB [I-D.ietf-adslmib-gbond-eth-mib] for a G.998.2
bonded interface. bonded interface.
o GBOND-TDIM-MIB [I-D.ietf-adslmib-gbond-tdim-mib] for a G.998.3 o GBOND-TDIM-MIB [I-D.ietf-adslmib-gbond-tdim-mib] for a G.998.3
bonded interface. bonded interface.
4.3. Relationship to xDSL MIB modules 4.3. Relationship to xDSL MIB modules
Each xDSL technology is described in a relevant xDSL line MIB module: Each xDSL technology is described in a relevant xDSL line MIB module:
e.g., HDSL2-SHDSL-LINE-MIB [RFC4319] for G.SHDSL, ADSL-LINE-EXT-MIB e.g., HDSL2-SHDSL-LINE-MIB [RFC4319] for G.SHDSL, ADSL-LINE-EXT-MIB
[RFC3440] for ADSL, ADSL2-LINE-MIB [RFC4706] for ADSL2, VDSL-LINE-MIB [RFC3440] for ADSL, ADSL2-LINE-MIB [RFC4706] for ADSL2, VDSL-LINE-MIB
[RFC3728] for VDSL or VDSL2-LINE-MIB [RFC5650] for VDSL2. [RFC3728] for VDSL or VDSL2-LINE-MIB [RFC5650] for VDSL2.
These MIBs are used to manage individual xDSL lines/channels (BCEs). These MIB moduless are used to manage individual xDSL lines/channels
(BCEs).
5. MIB Structure 5. MIB Structure
5.1. Overview 5.1. Overview
The main management objects defined in the GBOND-MIB module are split The main management objects defined in the GBOND-MIB module are split
into 2 groups, structured as recommended by RFC 4181 [RFC4181]: into 2 groups, structured as recommended by RFC 4181 [RFC4181]:
o gBondPort - containing objects for configuration, capabilities, o gBondPort - containing objects for configuration, capabilities,
status, historical performance monitoring and notifications, status, historical performance monitoring and notifications,
skipping to change at page 12, line 35 skipping to change at page 12, line 38
buckets (interval-counters) defined in [TR-159] are implemented using buckets (interval-counters) defined in [TR-159] are implemented using
the textual conventions defined in the HC-PerfHist-TC-MIB [RFC3705]. the textual conventions defined in the HC-PerfHist-TC-MIB [RFC3705].
The HC-PerfHist-TC-MIB defines 64-bit versions of the textual The HC-PerfHist-TC-MIB defines 64-bit versions of the textual
conventions found in PerfHist-TC-MIB [RFC3593]. conventions found in PerfHist-TC-MIB [RFC3593].
The agent SHOULD align the beginning of each interval to a fifteen The agent SHOULD align the beginning of each interval to a fifteen
minute boundary of a wall clock. Likewise, the beginning of each one minute boundary of a wall clock. Likewise, the beginning of each one
day intervals SHOULD be aligned with the start of a day. day intervals SHOULD be aligned with the start of a day.
Counters are not reset when a GBS is reinitialized, but rather only Counters are not reset when a GBS is reinitialized, but rather only
when the agent is reset or reinitialized (or under specific request when the agent is reset or reinitialized.
outside the scope of this MIB module).
Note that the accumulation of certain performance events for a
monitored entity is inhibited (counting stops) during periods of
service unavailability on that monitored entity. The DESCRIPTION
clause of performance monitoring counters in this MIB module
specifies which of the counters are inhibited during periods of
service unavailability.
5.3. Mapping of DSL Forum TR-159 Managed Objects 5.3. Mapping of DSL Forum TR-159 Managed Objects
This section contains the mapping between relevant managed objects This section contains the mapping between relevant managed objects
(attributes) defined in [TR-159] and managed objects defined in this (attributes) defined in [TR-159] and managed objects defined in this
document and in associated MIB modules, i.e., the IF-MIB [RFC2863]. document and in associated MIB modules, i.e., the IF-MIB [RFC2863].
+---------------------------------+---------------------------------+ +-------------------------------+-----------------------------------+
| G.Bond Managed Object | Corresponding SNMP Object | | G.Bond Managed Object | Corresponding SNMP Object |
+---------------------------------+---------------------------------+ +-------------------------------+-----------------------------------+
| oBondingGroup - Basic Package | | | oBondingGroup - Basic Package | |
| (Mandatory) | | | (Mandatory) | |
+---------------------------------+---------------------------------+ +-------------------------------+-----------------------------------+
| aGroupID | ifIndex (IF-MIB) | | aGroupID | ifIndex (IF-MIB) |
+---------------------------------+---------------------------------+ +-------------------------------+-----------------------------------+
| aGroupBondSchemesSupported | gBondSchemesSupported | | aGroupBondSchemesSupported | gBondPortCapSchemesSupported |
| aGroupPeerBondSchemesSupported | gBondPeerSchemesSupported | +-------------------------------+-----------------------------------+
+---------------------------------+---------------------------------+ | aGroupPeerBondSchemesSupporte | gBondPortCapPeerSchemesSupported |
| aGroupAdminBondScheme | gBondAdminScheme | | d | |
+---------------------------------+---------------------------------+ +-------------------------------+-----------------------------------+
| aGroupPeerAdminBondScheme | gBondPeerAdminScheme | | aGroupAdminBondScheme | gBondPortConfAdminScheme |
+---------------------------------+---------------------------------+ +-------------------------------+-----------------------------------+
| aGroupOperBondScheme | gBondOperScheme | | aGroupPeerAdminBondScheme | gBondPortConfPeerAdminScheme |
+---------------------------------+---------------------------------+ +-------------------------------+-----------------------------------+
| aGroupPeerOperBondScheme | gBondPeerOperScheme | | aGroupOperBondScheme | gBondPortStatOperScheme |
+---------------------------------+---------------------------------+ +-------------------------------+-----------------------------------+
| aGroupEnd | gBondPortSide | | aGroupPeerOperBondScheme | gBondPortStatPeerOperScheme |
+---------------------------------+---------------------------------+ +-------------------------------+-----------------------------------+
| aGroupOperState | ifOperStatus (IF-MIB) | | aGroupEnd | gBondPortStatSide |
+---------------------------------+---------------------------------+ +-------------------------------+-----------------------------------+
| aGroupAdminState | ifAdminStatus (IF-MIB) | | aGroupOperState | ifOperStatus (IF-MIB) |
+---------------------------------+---------------------------------+ +-------------------------------+-----------------------------------+
| aGroupStatus | gBondFltStatus | | aGroupAdminState | ifAdminStatus (IF-MIB) |
+---------------------------------+---------------------------------+ +-------------------------------+-----------------------------------+
| aGroupCapacity | gBondCapacity | | aGroupStatus | gBondPortStatFltStatus |
+---------------------------------+---------------------------------+ +-------------------------------+-----------------------------------+
| aGroupPeerCapacity | gBondPeerCapacity | | aGroupCapacity | gBondPortCapCapacity |
+---------------------------------+---------------------------------+ +-------------------------------+-----------------------------------+
| aGroupNumChannels | gBondNumBCEs | | aGroupPeerCapacity | gBondPortCapPeerCapacity |
+---------------------------------+---------------------------------+ +-------------------------------+-----------------------------------+
| aGroupName | ifName (IF-MIB) | | aGroupNumChannels | gBondPortStatNumBCEs |
+---------------------------------+---------------------------------+ +-------------------------------+-----------------------------------+
| aGroupDiscoveryCode | gBondDiscoveryCode | | aGroupName | ifName (IF-MIB) |
+---------------------------------+---------------------------------+ +-------------------------------+-----------------------------------+
| aGroupUpRate | gBondUpDataRate | | aGroupDiscoveryCode | gBondPortConfDiscoveryCode |
+---------------------------------+---------------------------------+ +-------------------------------+-----------------------------------+
| aGroupDownRate | gBondDnDataRate | | aGroupUpRate | gBondPortStatUpDataRate |
+---------------------------------+---------------------------------+ +-------------------------------+-----------------------------------+
| aGroupTargetUpRate | gBondTargetUpDataRate | | aGroupDownRate | gBondPortStatDnDataRate |
+---------------------------------+---------------------------------+ +-------------------------------+-----------------------------------+
| aGroupTargetDownRate | gBondTargetDnDataRate | | aGroupTargetUpRate | gBondPortConfTargetUpDataRate |
+---------------------------------+---------------------------------+ +-------------------------------+-----------------------------------+
| aGroupThreshLowUpRate | gBondThreshLowUpRate | | aGroupTargetDownRate | gBondPortConfTargetDnDataRate |
+---------------------------------+---------------------------------+ +-------------------------------+-----------------------------------+
| aGroupThreshLowDownRate | gBondThreshLowDnRate | | aGroupThreshLowUpRate | gBondPortConfThreshLowUpRate |
+---------------------------------+---------------------------------+ | aGroupThreshLowDownRate | gBondPortConfThreshLowDnRate |
| aGroupLowRateCrossingEnable | gBondLowRateCrossingEnable | +-------------------------------+-----------------------------------+
+---------------------------------+---------------------------------+ | aGroupLowRateCrossingEnable | gBondPortConfLowRateCrossingEnabl |
| nGroupLowUpRateCrossing | gBondLowUpRateCrossing | | | e |
+---------------------------------+---------------------------------+ +-------------------------------+-----------------------------------+
| nGroupLowDownRateCrossing | gBondLowDnRateCrossing | | nGroupLowUpRateCrossing | gBondLowUpRateCrossing |
+---------------------------------+---------------------------------+ +-------------------------------+-----------------------------------+
+---------------------------------+---------------------------------+ | nGroupLowDownRateCrossing | gBondLowDnRateCrossing |
| aGroupLinkUpDownEnable | _Note: Currently IF-MIB does | +-------------------------------+-----------------------------------+
| | not provide a control object | | aGroupLinkUpDownEnable | The linkUp/linkDown notifications |
| | for the linkUp/linkDown | | | of IF-MIB can be controlled using |
| | notifications._ | | | the mechanisms defined in RFC |
+---------------------------------+---------------------------------+ | | 3413 [RFC3413]. |
| nGroupLinkUp | linkDown (IF-MIB) | +-------------------------------+-----------------------------------+
+---------------------------------+---------------------------------+ | nGroupLinkUp | linkDown (IF-MIB) |
| nGroupLinkDown | linkUp (IF-MIB) | +-------------------------------+-----------------------------------+
+---------------------------------+---------------------------------+ | nGroupLinkDown | linkUp (IF-MIB) |
| oBondingGroup - PM Package | | +-------------------------------+-----------------------------------+
| (Optional) | | | oBondingGroup - PM Package | |
+---------------------------------+---------------------------------+ | (Optional) | |
| aGroupPerfES | gBondPerfES | +-------------------------------+-----------------------------------+
+---------------------------------+---------------------------------+ | aGroupPerfES | gBondPortPmCurES |
| aGroupPerfSES | gBondPerfSES | +-------------------------------+-----------------------------------+
+---------------------------------+---------------------------------+ | aGroupPerfSES | gBondPortPmCurSES |
| aGroupPerfUAS | gBondPerfUAS | +-------------------------------+-----------------------------------+
+---------------------------------+---------------------------------+ | aGroupPerfUAS | gBondPortPmCurUAS |
| aGroupPerf15MinValidIntervals | gBondPerf15MinValidIntervals | +-------------------------------+-----------------------------------+
+---------------------------------+---------------------------------+ | aGroupPerf15MinValidIntervals | gBondPortPmCur15MinValidIntervals |
| aGroupPerf15MinInvalidIntervals | gBondPerf15MinInvalidIntervals | +-------------------------------+-----------------------------------+
+---------------------------------+---------------------------------+ | aGroupPerf15MinInvalidInterva | gBondPortPmCur15MinInvalidInterva |
| aGroupPerfCurr15MinTimeElapsed | gBondPerfCurr15MinTimeElapsed | | ls | ls |
+---------------------------------+---------------------------------+ +-------------------------------+-----------------------------------+
| aGroupPerfCurr15MinES | gBondPerfCurr15MinES | | aGroupPerfCurr15MinTimeElapse | gBondPortPmCur15MinTimeElapsed |
+---------------------------------+---------------------------------+ | d | |
| aGroupPerfCurr15MinSES | gBondPerfCurr15MinSES | +-------------------------------+-----------------------------------+
+---------------------------------+---------------------------------+ | aGroupPerfCurr15MinES | gBondPortPmCur15MinES |
| aGroupPerfCurr15MinUAS | gBondPerfCurr15MinUAS | +-------------------------------+-----------------------------------+
+---------------------------------+---------------------------------+ | aGroupPerfCurr15MinSES | gBondPortPmCur15MinSES |
| aGroupPerfTcaEnable | gBondPerfTcaEnable | +-------------------------------+-----------------------------------+
+---------------------------------+---------------------------------+ | aGroupPerfCurr15MinUAS | gBondPortPmCur15MinUAS |
| aGroupPerfThreshold15MinES | gBondPerfThereshold15MinES | +-------------------------------+-----------------------------------+
+---------------------------------+---------------------------------+ | aGroupPerfTcaEnable | gBondPortConfPmTcaEnable |
| aGroupPerfThreshold15MinSES | gBondPerfThereshold15MinSES | +-------------------------------+-----------------------------------+
+---------------------------------+---------------------------------+ | aGroupPerfThreshold15MinES | gBondPortPmTcaProfileThresh15MinE |
| aGroupPerfThreshold15MinUAS | gBondPerfThereshold15MinUAS | | | S |
+---------------------------------+---------------------------------+ +-------------------------------+-----------------------------------+
| nGroupPerfTca15MinES | gBondPerfTca15MinESCrossing | | aGroupPerfThreshold15MinSES | gBondPortPmTcaProfileThresh15MinS |
+---------------------------------+---------------------------------+ | | ES |
| nGroupPerfTca15MinSES | gBondPerfTca15MinSESCrossing | | aGroupPerfThreshold15MinUAS | gBondPortPmTcaProfileThresh15MinU |
+---------------------------------+---------------------------------+ | | AS |
| nGroupPerfTca15MinUAS | gBondPerfTca15MinUASCrossing | +-------------------------------+-----------------------------------+
+---------------------------------+---------------------------------+ | nGroupPerfTca15MinES | gBondPmTca15MinESCrossing |
| aGroupPerf1DayValidIntervals | gBondPerf1DayValidIntervals | +-------------------------------+-----------------------------------+
+---------------------------------+---------------------------------+ | nGroupPerfTca15MinSES | gBondPmTca15MinSESCrossing |
| aGroupPerf1DayInvalidIntervals | gBondPerf1DayInvalidIntervals | +-------------------------------+-----------------------------------+
| aGroupPerfCurr1DayTimeElapsed | gBondPerfCurr1DayTimeElapsed | | nGroupPerfTca15MinUAS | gBondPmTca15MinUASCrossing |
+---------------------------------+---------------------------------+ +-------------------------------+-----------------------------------+
| aGroupPerfCurr1DayES | gBondPerf1DayIntervalES | | aGroupPerf1DayValidIntervals | gBondPortPmCur1DayValidIntervals |
+---------------------------------+---------------------------------+ +-------------------------------+-----------------------------------+
| aGroupPerfCurr1DaySES | gBondPerf1DayIntervalSES | | aGroupPerf1DayInvalidInterval | gBondPortPmCur1DayInvalidInterval |
+---------------------------------+---------------------------------+ | s | s |
| aGroupPerfCurr1DayUAS | gBondPerf1DayIntervalUAS | +-------------------------------+-----------------------------------+
+---------------------------------+---------------------------------+ | aGroupPerfCurr1DayTimeElapsed | gBondPortPmCur1DayTimeElapsed |
| aGroupPerfThreshold1DayES | gBondPerfThreshold1DayES | +-------------------------------+-----------------------------------+
+---------------------------------+---------------------------------+ | aGroupPerfCurr1DayES | gBondPortPmCur1DayIntervalES |
| aGroupPerfThreshold1DaySES | gBondPerfThreshold1DaySES | +-------------------------------+-----------------------------------+
+---------------------------------+---------------------------------+ | aGroupPerfCurr1DaySES | gBondPortPmCur1DayIntervalSES |
| aGroupPerfThreshold1DayUAS | gBondPerfThreshold1DayUAS | +-------------------------------+-----------------------------------+
+---------------------------------+---------------------------------+ | aGroupPerfCurr1DayUAS | gBondPortPmCur1DayIntervalUAS |
| nGroupPerfTca1DayES | gBondPerfTca1DayESCrossing | +-------------------------------+-----------------------------------+
+---------------------------------+---------------------------------+ | aGroupPerfThreshold1DayES | gBondPortPmTcaProfileThresh1DayES |
| nGroupPerfTca1DaySES | gBondPerfTca1DaySESCrossing | +-------------------------------+-----------------------------------+
+---------------------------------+---------------------------------+ | aGroupPerfThreshold1DaySES | gBondPortPmTcaProfileThresh1DaySE |
| nGroupPerfTca1DayUAS | gBondPerfTca1DayUASCrossing | | | S |
+---------------------------------+---------------------------------+ +-------------------------------+-----------------------------------+
| aGroupPerf15MinIntervalNumber | gBondPerf15MinIntervalIndex | | aGroupPerfThreshold1DayUAS | gBondPortPmTcaProfileThresh1DayUA |
+---------------------------------+---------------------------------+ | | S |
| aGroupPerf15MinIntervalValid | gBondPerf15MinIntervalValid | +-------------------------------+-----------------------------------+
+---------------------------------+---------------------------------+ | nGroupPerfTca1DayES | gBondPmTca1DayESCrossing |
| aGroupPerf15MinIntervalES | gBondPerf15MinIntervalES | +-------------------------------+-----------------------------------+
+---------------------------------+---------------------------------+ | nGroupPerfTca1DaySES | gBondPmTca1DaySESCrossing |
| aGroupPerf15MinIntervalSES | gBondPerf15MinIntervalSES | +-------------------------------+-----------------------------------+
+---------------------------------+---------------------------------+ | nGroupPerfTca1DayUAS | gBondPmTca1DayUASCrossing |
| aGroupPerf15MinIntervalUAS | gBondPerf15MinIntervalUAS | +-------------------------------+-----------------------------------+
+---------------------------------+---------------------------------+ | aGroupPerf15MinIntervalNumber | gBondPortPm15MinIntervalIndex |
| aGroupPerf1DayIntervalNumber | gBondPerf1DayIntervalIndex | +-------------------------------+-----------------------------------+
+---------------------------------+---------------------------------+ | aGroupPerf15MinIntervalValid | gBondPortPm15MinIntervalValid |
| aGroupPerf1DayIntervalValid | gBondPerf1DayIntervalValid | +-------------------------------+-----------------------------------+
+---------------------------------+---------------------------------+ | aGroupPerf15MinIntervalES | gBondPortPm15MinIntervalES |
| aGroupPerf1DayIntervalMoniSecs | gBondPerf1DayIntervalMoniTime | +-------------------------------+-----------------------------------+
+---------------------------------+---------------------------------+ | aGroupPerf15MinIntervalSES | gBondPortPm15MinIntervalSES |
| aGroupPerf1DayIntervalES | gBondPerf1DayIntervalES | +-------------------------------+-----------------------------------+
+---------------------------------+---------------------------------+ | aGroupPerf15MinIntervalUAS | gBondPortPm15MinIntervalUAS |
| aGroupPerf1DayIntervalSES | gBondPerf1DayIntervalSES | +-------------------------------+-----------------------------------+
+---------------------------------+---------------------------------+ | aGroupPerf1DayIntervalNumber | gBondPortPm1DayIntervalIndex |
| aGroupPerf1DayIntervalUAS | gBondPerf1DayIntervalUAS | +-------------------------------+-----------------------------------+
+---------------------------------+---------------------------------+ +-------------------------------+-----------------------------------+
| oLine - Basic Package | | | aGroupPerf1DayIntervalValid | gBondPortPm1DayIntervalValid |
| (Mandatory) | | +-------------------------------+-----------------------------------+
+---------------------------------+---------------------------------+ | aGroupPerf1DayIntervalMoniSec | gBondPortPm1DayIntervalMoniTime |
| aLineID | ifIndex (IF-MIB) | | s | |
+---------------------------------+---------------------------------+ +-------------------------------+-----------------------------------+
| aLineType | ifType (IF-MIB) | | aGroupPerf1DayIntervalES | gBondPortPm1DayIntervalES |
| aLineOperState | ifOperStatus (IF-MIB) | +-------------------------------+-----------------------------------+
+---------------------------------+---------------------------------+ | aGroupPerf1DayIntervalSES | gBondPortPm1DayIntervalSES |
| aLineStatus | *dsl*CurrStatus (*DSL-LINE-MIB) | +-------------------------------+-----------------------------------+
+---------------------------------+---------------------------------+ | aGroupPerf1DayIntervalUAS | gBondPortPm1DayIntervalUAS |
| aLineEnd | *dsl*Side (*DSL-LINE-MIB) | +-------------------------------+-----------------------------------+
+---------------------------------+---------------------------------+ | oLine - Basic Package | |
| aLineAdminState | ifAdminStatus (IF-MIB) | | (Mandatory) | |
+---------------------------------+---------------------------------+ +-------------------------------+-----------------------------------+
| aLineRemoteDiscoveryCode | gBondBceRemoteDiscoveryCode | | aLineID | ifIndex (IF-MIB) |
+---------------------------------+---------------------------------+ +-------------------------------+-----------------------------------+
| aLineUpDownEnable | _Note: Currently IF-MIB does | | aLineType | ifType (IF-MIB) |
| | not provide a control object | +-------------------------------+-----------------------------------+
| | for the linkUp/linkDown | | aLineOperState | ifOperStatus (IF-MIB) |
| | notifications._ | +-------------------------------+-----------------------------------+
+---------------------------------+---------------------------------+ | aLineStatus | *dsl*CurrStatus (*DSL-LINE-MIB) |
| nLineUp | linkUp (IF-MIB) | +-------------------------------+-----------------------------------+
+---------------------------------+---------------------------------+ | aLineEnd | *dsl*Side (*DSL-LINE-MIB) |
| nLineDown | linkDown (IF-MIB) | +-------------------------------+-----------------------------------+
+---------------------------------+---------------------------------+ | aLineAdminState | ifAdminStatus (IF-MIB) |
| oChannel - Basic Package | | +-------------------------------+-----------------------------------+
| (Mandatory) | | | aLineRemoteDiscoveryCode | gBondBceConfRemoteDiscoveryCode |
+---------------------------------+---------------------------------+ +-------------------------------+-----------------------------------+
| aChannelID | ifIndex (IF-MIB) | | aLineUpDownEnable | The linkUp/linkDown notifications |
+---------------------------------+---------------------------------+ | | of IF-MIB can be controlled using |
| aChannelGroupID | | | | the mechanisms defined in RFC |
+---------------------------------+---------------------------------+ | | 3413. |
| aChannelType | ifType (IF-MIB) | +-------------------------------+-----------------------------------+
+---------------------------------+---------------------------------+ | nLineUp | linkUp (IF-MIB) |
| aChannelOperState | ifOperStatus (IF-MIB) | +-------------------------------+-----------------------------------+
+---------------------------------+---------------------------------+ | nLineDown | linkDown (IF-MIB) |
| aChannelStatus | *dsl*CurrStatus | +-------------------------------+-----------------------------------+
| | (*DSL-LINE-MIB), | | oChannel - Basic Package | |
| | xdsl2ChStatus*Status | | (Mandatory) | |
| | (VDSL2-LINE-MIB) | +-------------------------------+-----------------------------------+
+---------------------------------+---------------------------------+ | aChannelID | ifIndex (IF-MIB) |
+-------------------------------+-----------------------------------+
| aChannelGroupID | |
+-------------------------------+-----------------------------------+
| aChannelType | ifType (IF-MIB) |
+-------------------------------+-----------------------------------+
| aChannelOperState | ifOperStatus (IF-MIB) |
| aChannelStatus | *dsl*CurrStatus (*DSL-LINE-MIB), |
| | xdsl2ChStatus*Status |
| | (VDSL2-LINE-MIB) |
+-------------------------------+-----------------------------------+
Table 2: Mapping of TR-159 Managed Objects Table 2: Mapping of TR-159 Managed Objects
6. xDSL Multi-pair Bonding MIB Definitions 6. xDSL Multi-pair Bonding MIB Definitions
GBOND-MIB DEFINITIONS ::= BEGIN GBOND-MIB DEFINITIONS ::= BEGIN
IMPORTS IMPORTS
MODULE-IDENTITY, MODULE-IDENTITY,
OBJECT-TYPE, OBJECT-TYPE,
skipping to change at page 17, line 30 skipping to change at page 17, line 47
HCPerfIntervalCount, HCPerfIntervalCount,
HCPerfIntervalThreshold, HCPerfIntervalThreshold,
HCPerfValidIntervals, HCPerfValidIntervals,
HCPerfInvalidIntervals, HCPerfInvalidIntervals,
HCPerfTimeElapsed, HCPerfTimeElapsed,
HCPerfTotalCount HCPerfTotalCount
FROM HC-PerfHist-TC-MIB -- [RFC3705] FROM HC-PerfHist-TC-MIB -- [RFC3705]
; ;
------------------------------------------------------------------------ ------------------------------------------------------------------------
gBondMIB MODULE-IDENTITY gBondMIB MODULE-IDENTITY
LAST-UPDATED "201105260000Z" -- May 26, 2011 LAST-UPDATED "201202010000Z" -- Feb 01, 2012
ORGANIZATION "IETF ADSL MIB Working Group" ORGANIZATION "IETF ADSL MIB Working Group"
CONTACT-INFO CONTACT-INFO
"WG charter: "WG charter:
http://www.ietf.org/html.charters/adslmib-charter.html http://www.ietf.org/html.charters/adslmib-charter.html
Mailing Lists: Mailing Lists:
General Discussion: adslmib@ietf.org General Discussion: adslmib@ietf.org
To Subscribe: adslmib-request@ietf.org To Subscribe: adslmib-request@ietf.org
In Body: subscribe your_email_address In Body: subscribe your_email_address
skipping to change at page 19, line 6 skipping to change at page 19, line 23
Naming Conventions: Naming Conventions:
BCE - Bonding Channel Entity BCE - Bonding Channel Entity
BTU - Bonding Transmission Unit BTU - Bonding Transmission Unit
CO - Central Office CO - Central Office
CPE - Customer Premises Equipment CPE - Customer Premises Equipment
GBS - Generic Bonding Sublayer GBS - Generic Bonding Sublayer
PM - Performance Monitoring PM - Performance Monitoring
SNR - Signal to Noise Ratio SNR - Signal to Noise Ratio
TCA - Threshold Crossing Alert TCA - Threshold Crossing Alert
Copyright (C) The IETF Trust (2011). Copyright (C) The IETF Trust (2012).
This version of this MIB module is part of RFC XXXX; This version of this MIB module is part of RFC XXXX;
see the RFC itself for full legal notices." see the RFC itself for full legal notices."
REVISION "201105260000Z" -- May 26, 2011 REVISION "201202010000Z" -- Feb 01, 2012
DESCRIPTION "Initial version, published as RFC XXXX." DESCRIPTION "Initial version, published as RFC XXXX."
-- EdNote: Replace XXXX with the actual RFC number & -- EdNote: Replace XXXX with the actual RFC number &
-- remove this note -- remove this note
::= { mib-2 ZZZ } ::= { mib-2 ZZZ }
-- EdNote: Replace ZZZ with a real OID once it is -- EdNote: Replace ZZZ with a real OID once it is
-- allocated & remove this note. -- allocated & remove this note.
skipping to change at page 20, line 4 skipping to change at page 20, line 20
bit values g9981(1), g9982(2) and g9983(3), respectively. bit values g9981(1), g9982(2) and g9983(3), respectively.
An additional value of unknown(0), can be returned as a result An additional value of unknown(0), can be returned as a result
of GET operation, when an value of the object cannot be of GET operation, when an value of the object cannot be
determined, for example a peer GBS cannot be reached or it determined, for example a peer GBS cannot be reached or it
does not support any kind of bonding." does not support any kind of bonding."
SYNTAX BITS { SYNTAX BITS {
unknown(0), unknown(0),
g9981(1), g9981(1),
g9982(2), g9982(2),
g9983(3) g9983(3)
} }
GBondScheme ::= TEXTUAL-CONVENTION GBondScheme ::= TEXTUAL-CONVENTION
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This textual convention defines ITU-T G.998 bonding scheme "This textual convention defines ITU-T G.998 bonding scheme
values. Possible values are: values. Possible values are:
unknown(0) - undefined or unknown unknown(0) - undefined or unknown
g9981(1) - G.998.1 (G.Bond/ATM) g9981(1) - G.998.1 (G.Bond/ATM)
g9982(2) - G.998.2 (G.Bond/Ethernt) g9982(2) - G.998.2 (G.Bond/Ethernet)
g9983(3) - G.998.3 (G.Bond/TDIM)." g9983(3) - G.998.3 (G.Bond/TDIM)."
SYNTAX INTEGER { SYNTAX INTEGER {
unknown(0), unknown(0),
g9981(1), g9981(1),
g9982(2), g9982(2),
g9983(3) g9983(3)
} }
GBondPerf1DayIntervalThreshold ::= TEXTUAL-CONVENTION GBondPm1DayIntervalThreshold ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d" DISPLAY-HINT "d"
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This textual convention defines a range of values that may be "This textual convention defines a range of values that may be
set in a fault threshold alarm control for a 1-day interval. set in a fault threshold alarm control for a 1-day performance
monitoring interval.
As the number of seconds in a 1-day interval numbers at most As the number of seconds in a 1-day interval numbers at most
86400, objects of this type may have a range of 0...86400, 86400, objects of this type may have a range of 0...86400,
where the value of 0 disables the alarm." where the value of 0 disables the alarm."
SYNTAX Unsigned32 (0..86400) SYNTAX Unsigned32 (0..86400)
-- Port Notifications Group -- Port Notifications Group
gBondPortNotifications OBJECT IDENTIFIER ::= { gBondPort 0 } gBondPortNotifications OBJECT IDENTIFIER ::= { gBondPort 0 }
gBondLowUpRateCrossing NOTIFICATION-TYPE gBondLowUpRateCrossing NOTIFICATION-TYPE
OBJECTS { OBJECTS {
-- ifIndex is not needed here since we are under specific GBS -- ifIndex is not needed here since we are under specific GBS
gBondUpDataRate, gBondPortStatUpDataRate,
gBondThreshLowUpRate gBondPortConfThreshLowUpRate
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This notification indicates that the G.Bond port' upstream "This notification indicates that the G.Bond port' upstream
data rate has reached/dropped below or exceeded the low data rate has reached/dropped below or exceeded the low
upstream rate threshold, specified by gBondThreshLowUpRate. upstream rate threshold, specified by
gBondPortConfThreshLowUpRate.
This notification MAY be sent for the -O subtype ports This notification MAY be sent for the -O subtype ports
while the port is up, on the crossing event in both while the port is up, on the crossing event in both
directions: from normal (rate is above the threshold) to low directions: from normal (rate is above the threshold) to low
(rate equals the threshold or below it) and from low to (rate equals the threshold or below it) and from low to
normal. This notification is not applicable to the -R normal. This notification is not applicable to the -R
subtypes. subtypes.
It is RECOMMENDED that a small debouncing period of 2.5 sec, It is RECOMMENDED that a small debouncing period of 2.5 sec,
between the detection of the condition and notification, between the detection of the condition and notification,
skipping to change at page 21, line 24 skipping to change at page 21, line 41
The adaptive nature of the G.Bond technology allows the port The adaptive nature of the G.Bond technology allows the port
to adapt itself to the changes in the copper environment, to adapt itself to the changes in the copper environment,
e.g., an impulse noise, alien crosstalk, or a e.g., an impulse noise, alien crosstalk, or a
micro-interruption may temporarily drop one or more BCEs in micro-interruption may temporarily drop one or more BCEs in
the aggregation group, causing a rate degradation of the the aggregation group, causing a rate degradation of the
aggregated G.Bond link. The dropped BCEs would then try to aggregated G.Bond link. The dropped BCEs would then try to
re-initialize, possibly at a lower rate than before, adjusting re-initialize, possibly at a lower rate than before, adjusting
the rate to provide required target SNR margin. the rate to provide required target SNR margin.
Generation of this notification is controlled by the Generation of this notification is controlled by the
gBondLowRateCrossingEnable object. gBondPortConfLowRateCrossingEnable object.
This object maps to the TR-159 notification This object maps to the TR-159 notification
nGroupLowUpRateCrossing." nGroupLowUpRateCrossing."
REFERENCE REFERENCE
"[TR-159] 5.5.1.24" "[TR-159] 5.5.1.24"
::= { gBondPortNotifications 1 } ::= { gBondPortNotifications 1 }
gBondLowDnRateCrossing NOTIFICATION-TYPE gBondLowDnRateCrossing NOTIFICATION-TYPE
OBJECTS { OBJECTS {
-- ifIndex is not needed here since we are under specific GBS -- ifIndex is not needed here since we are under specific GBS
gBondDnDataRate, gBondPortStatDnDataRate,
gBondThreshLowDnRate gBondPortConfThreshLowDnRate
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This notification indicates that the G.Bond port' downstream "This notification indicates that the G.Bond port' downstream
data rate has reached/dropped below or exceeded the low data rate has reached/dropped below or exceeded the low
downstream rate threshold, specified by downstream rate threshold, specified by
gBondThreshLowDnRate. gBondPortConfThreshLowDnRate.
This notification MAY be sent for the -O subtype ports This notification MAY be sent for the -O subtype ports
while the port is up, on the crossing event in both while the port is up, on the crossing event in both
directions: from normal (rate is above the threshold) to low directions: from normal (rate is above the threshold) to low
(rate equals the threshold or below it) and from low to (rate equals the threshold or below it) and from low to
normal. This notification is not applicable to the -R normal. This notification is not applicable to the -R
subtypes. subtypes.
It is RECOMMENDED that a small debouncing period of 2.5 sec, It is RECOMMENDED that a small debouncing period of 2.5 sec,
between the detection of the condition and notification, between the detection of the condition and notification,
skipping to change at page 22, line 20 skipping to change at page 22, line 36
The adaptive nature of the G.Bond technology allows the port The adaptive nature of the G.Bond technology allows the port
to adapt itself to the changes in the copper environment, to adapt itself to the changes in the copper environment,
e.g., an impulse noise, alien crosstalk, or a e.g., an impulse noise, alien crosstalk, or a
micro-interruption may temporarily drop one or more BCEs in micro-interruption may temporarily drop one or more BCEs in
the aggregation group, causing a rate degradation of the the aggregation group, causing a rate degradation of the
aggregated G.Bond link. The dropped BCEs would then try to aggregated G.Bond link. The dropped BCEs would then try to
re-initialize, possibly at a lower rate than before, re-initialize, possibly at a lower rate than before,
adjusting the rate to provide required target SNR margin. adjusting the rate to provide required target SNR margin.
Generation of this notification is controlled by the Generation of this notification is controlled by the
gBondLowRateCrossingEnable object. gBondPortConfLowRateCrossingEnable object.
This object maps to the TR-159 notification This object maps to the TR-159 notification
nGroupLowDownRateCrossing." nGroupLowDownRateCrossing."
REFERENCE REFERENCE
"[TR-159] 5.5.1.25" "[TR-159] 5.5.1.25"
::= { gBondPortNotifications 2} ::= { gBondPortNotifications 2}
gBondPerfTca15MinESCrossing NOTIFICATION-TYPE gBondPmTca15MinESCrossing NOTIFICATION-TYPE
OBJECTS { OBJECTS {
-- ifIndex is not needed here since we are under specific GBS -- ifIndex is not needed here since we are under specific GBS
gBondPerfCurr15MinES, gBondPortPmCur15MinES,
gBondPerfThreshold15MinES gBondPortPmTcaProfileThresh15MinES
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This notification indicates that the Errored Seconds threshold, "This notification indicates that the Errored Seconds threshold,
specified by gBondPerfThreshold15MinES, has been reached or specified by gBondPortPmTcaProfileThresh15MinES, has been
exceeded for the GPS port. reached or exceeded for the GPS port.
Generation of this notification is controlled by Generation of this notification is controlled by
gBondPerfTcaEnable and gBondPerfThreshold15MinES objects. gBondPortConfPmTcaEnable and
gBondPortPmTcaProfileThresh15MinES objects.
This object maps to the TR-159 notification This object maps to the TR-159 notification
nGroupPerfTca15MinES." nGroupPerfTca15MinES."
REFERENCE REFERENCE
"[TR-159] 5.5.1.42" "[TR-159] 5.5.1.42"
::= { gBondPortNotifications 3} ::= { gBondPortNotifications 3}
gBondPerfTca15MinSESCrossing NOTIFICATION-TYPE gBondPmTca15MinSESCrossing NOTIFICATION-TYPE
OBJECTS { OBJECTS {
-- ifIndex is not needed here since we are under specific GBS -- ifIndex is not needed here since we are under specific GBS
gBondPerfCurr15MinSES, gBondPortPmCur15MinSES,
gBondPerfThreshold15MinSES gBondPortPmTcaProfileThresh15MinSES
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This notification indicates that the Severely Errored Seconds "This notification indicates that the Severely Errored Seconds
threshold, specified by gBondPerfThreshold15MinSES, has been threshold, specified by gBondPortPmTcaProfileThresh15MinSES,
reached or exceeded for the GPS port. has been reached or exceeded for the GPS port.
Generation of this notification is controlled by Generation of this notification is controlled by
gBondPerfTcaEnable and gBondPerfThreshold15MinSES objects. gBondPortConfPmTcaEnable and
gBondPortPmTcaProfileThresh15MinSES objects.
This object maps to the TR-159 notification This object maps to the TR-159 notification
nGroupPerfTca15MinSES." nGroupPerfTca15MinSES."
REFERENCE REFERENCE
"[TR-159] 5.5.1.43" "[TR-159] 5.5.1.43"
::= { gBondPortNotifications 4} ::= { gBondPortNotifications 4}
gBondPerfTca15MinUASCrossing NOTIFICATION-TYPE gBondPmTca15MinUASCrossing NOTIFICATION-TYPE
OBJECTS { OBJECTS {
-- ifIndex is not needed here since we are under specific GBS -- ifIndex is not needed here since we are under specific GBS
gBondPerfCurr15MinUAS, gBondPortPmCur15MinUAS,
gBondPerfThreshold15MinUAS gBondPortPmTcaProfileThresh15MinUAS
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This notification indicates that the Unavailable Seconds "This notification indicates that the Unavailable Seconds
threshold, specified by gBondPerfThreshold15MinES, has been threshold, specified by gBondPortPmTcaProfileThresh15MinES,
reached or exceeded for the GPS port. has been reached or exceeded for the GPS port.
Generation of this notification is controlled by Generation of this notification is controlled by
gBondPerfTcaEnable and gBondPerfThreshold15MinUAS objects. gBondPortConfPmTcaEnable and
gBondPortPmTcaProfileThresh15MinUAS objects.
This object maps to the TR-159 notification This object maps to the TR-159 notification
nGroupPerfTca15MinUAS." nGroupPerfTca15MinUAS."
REFERENCE REFERENCE
"[TR-159] 5.5.1.44" "[TR-159] 5.5.1.44"
::= { gBondPortNotifications 5} ::= { gBondPortNotifications 5}
gBondPerfTca1DayESCrossing NOTIFICATION-TYPE gBondPmTca1DayESCrossing NOTIFICATION-TYPE
OBJECTS { OBJECTS {
-- ifIndex is not needed here since we are under specific GBS -- ifIndex is not needed here since we are under specific GBS
gBondPerfCurr1DayES, gBondPortPmCur1DayES,
gBondPerfThreshold1DayES gBondPortPmTcaProfileThresh1DayES
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This notification indicates that the Errored Seconds threshold, "This notification indicates that the Errored Seconds threshold,
specified by gBondPerfThreshold1DayES, has been reached or specified by gBondPortPmTcaProfileThresh1DayES, has been
exceeded for the GPS port. reached or exceeded for the GPS port.
Generation of this notification is controlled by Generation of this notification is controlled by
gBondPerfTcaEnable and gBondPerfThreshold1DayES objects. gBondPortConfPmTcaEnable and
gBondPortPmTcaProfileThresh1DayES objects.
This object maps to the TR-159 notification This object maps to the TR-159 notification
nGroupPerfTca1DayES." nGroupPerfTca1DayES."
REFERENCE REFERENCE
"[TR-159] 5.5.1.54" "[TR-159] 5.5.1.54"
::= { gBondPortNotifications 6} ::= { gBondPortNotifications 6}
gBondPerfTca1DaySESCrossing NOTIFICATION-TYPE gBondPmTca1DaySESCrossing NOTIFICATION-TYPE
OBJECTS { OBJECTS {
-- ifIndex is not needed here since we are under specific GBS -- ifIndex is not needed here since we are under specific GBS
gBondPerfCurr1DaySES, gBondPortPmCur1DaySES,
gBondPerfThreshold1DaySES gBondPortPmTcaProfileThresh1DaySES
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This notification indicates that the Severely Errored Seconds "This notification indicates that the Severely Errored Seconds
threshold, specified by gBondPerfThreshold1DaySES, has been threshold, specified by gBondPortPmTcaProfileThresh1DaySES,
reached or exceeded for the GPS port. has been reached or exceeded for the GPS port.
Generation of this notification is controlled by Generation of this notification is controlled by
gBondPerfTcaEnable and gBondPerfThreshold1DaySES objects. gBondPortConfPmTcaEnable and
gBondPortPmTcaProfileThresh1DaySES objects.
This object maps to the TR-159 notification This object maps to the TR-159 notification
nGroupPerfTca1DaySES." nGroupPerfTca1DaySES."
REFERENCE REFERENCE
"[TR-159] 5.5.1.55" "[TR-159] 5.5.1.55"
::= { gBondPortNotifications 7} ::= { gBondPortNotifications 7}
gBondPerfTca1DayUASCrossing NOTIFICATION-TYPE gBondPmTca1DayUASCrossing NOTIFICATION-TYPE
OBJECTS { OBJECTS {
-- ifIndex is not needed here since we are under specific GBS -- ifIndex is not needed here since we are under specific GBS
gBondPerfCurr1DayUAS, gBondPortPmCur1DayUAS,
gBondPerfThreshold1DayUAS gBondPortPmTcaProfileThresh1DayUAS
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This notification indicates that the Unavailable Seconds "This notification indicates that the Unavailable Seconds
threshold, specified by gBondPerfThreshold1DayUAS, has been threshold, specified by gBondPortPmTcaProfileThresh1DayUAS,
reached or exceeded for the GPS port. has been reached or exceeded for the GPS port.
Generation of this notification is controlled by Generation of this notification is controlled by
gBondPerfTcaEnable and gBondPerfThreshold1DayUAS objects. gBondPortConfPmTcaEnable and
gBondPortPmTcaProfileThresh1DayUAS objects.
This object maps to the TR-159 notification This object maps to the TR-159 notification
nGroupPerfTca1DayUAS." nGroupPerfTca1DayUAS."
REFERENCE REFERENCE
"[TR-159] 5.5.1.56" "[TR-159] 5.5.1.56"
::= { gBondPortNotifications 8} ::= { gBondPortNotifications 8}
-- G.Bond Port (GBS) group -- G.Bond Port (GBS) group
gBondPortConfTable OBJECT-TYPE gBondPortConfTable OBJECT-TYPE
skipping to change at page 25, line 29 skipping to change at page 26, line 4
gBondPortConfEntry OBJECT-TYPE gBondPortConfEntry OBJECT-TYPE
SYNTAX GBondPortConfEntry SYNTAX GBondPortConfEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry in the G.Bond Port Configuration table. "An entry in the G.Bond Port Configuration table.
Each entry represents a G.Bond port indexed by the ifIndex. Each entry represents a G.Bond port indexed by the ifIndex.
Note that a G.Bond GBS port runs on top of a single Note that a G.Bond GBS port runs on top of a single
or multiple BCE port(s), which are also indexed by ifIndex." or multiple BCE port(s), which are also indexed by ifIndex."
INDEX { ifIndex } INDEX { ifIndex }
::= { gBondPortConfTable 1 } ::= { gBondPortConfTable 1 }
GBondPortConfEntry ::= GBondPortConfEntry ::=
SEQUENCE { SEQUENCE {
gBondAdminScheme GBondScheme, gBondPortConfAdminScheme GBondScheme,
gBondPeerAdminScheme GBondScheme, gBondPortConfPeerAdminScheme GBondScheme,
gBondDiscoveryCode PhysAddress, gBondPortConfDiscoveryCode PhysAddress,
gBondTargetUpDataRate Unsigned32, gBondPortConfTargetUpDataRate Unsigned32,
gBondTargetDnDataRate Unsigned32, gBondPortConfTargetDnDataRate Unsigned32,
gBondThreshLowUpRate Unsigned32, gBondPortConfThreshLowUpRate Unsigned32,
gBondThreshLowDnRate Unsigned32, gBondPortConfThreshLowDnRate Unsigned32,
gBondLowRateCrossingEnable TruthValue, gBondPortConfLowRateCrossingEnable TruthValue,
gBondPerfTcaConfProfile SnmpAdminString, gBondPortConfPmTcaConfProfile SnmpAdminString,
gBondPerfTcaEnable TruthValue gBondPortConfPmTcaEnable TruthValue
} }
gBondAdminScheme OBJECT-TYPE gBondPortConfAdminScheme OBJECT-TYPE
SYNTAX GBondScheme SYNTAX GBondScheme
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A desired bonding scheme for a G.Bond GBS port. "A desired bonding scheme for a G.Bond GBS port.
The following values instruct the port to use corresponding The following values instruct the port to use corresponding
bonding scheme if supported: bonding scheme if supported:
g9981(1) - instructs the port to use G.998.1 bonding g9981(1) - instructs the port to use G.998.1 bonding
g9982(2) - instructs the port to use G.998.2 bonding g9982(2) - instructs the port to use G.998.2 bonding
g9983(3) - instructs the port to use G.998.3 bonding g9983(3) - instructs the port to use G.998.3 bonding
Changing of the gBondAdminScheme MUST be performed when the Changing of gBondPortConfAdminScheme MUST be performed when the
link is Down. Attempts to change this object MUST be rejected link is Down. Attempts to change this object MUST be rejected
(in case of SNMP with the error inconsistentValue), if the (in case of SNMP with the error inconsistentValue), if the
link is Up or Initializing. Attempts to change this object to link is Up or Initializing. Attempts to change this object to
an unsupported bonding scheme (see gBondSchemesSupported) an unsupported bonding scheme (see gBondPortCapSchemesSupported)
SHALL be rejected (in case of SNMP with the error wrongValue). SHALL be rejected (in case of SNMP with the error wrongValue).
This object MUST be maintained in a persistent manner.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupAdminBondScheme." aGroupAdminBondScheme."
REFERENCE REFERENCE
"[TR-159] 5.5.1.6" "[TR-159] 5.5.1.6"
::= { gBondPortConfEntry 1 } ::= { gBondPortConfEntry 1 }
gBondPeerAdminScheme OBJECT-TYPE gBondPortConfPeerAdminScheme OBJECT-TYPE
SYNTAX GBondScheme SYNTAX GBondScheme
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A desired bonding scheme for a peer (link partner) G.Bond "A desired bonding scheme for a peer (link partner) G.Bond
port (GBS). port (GBS).
The following values instruct the peer port to use The following values instruct the peer port to use
corresponding bonding scheme if supported: corresponding bonding scheme if supported:
g9981(1) - instructs the port to use G.998.1 bonding g9981(1) - instructs the port to use G.998.1 bonding
g9982(2) - instructs the port to use G.998.2 bonding g9982(2) - instructs the port to use G.998.2 bonding
g9983(3) - instructs the port to use G.998.3 bonding g9983(3) - instructs the port to use G.998.3 bonding
Changing of the gBondAdminScheme MUST be performed when the Changing of this object MUST be performed when the link is Down.
link is Down. Attempts to change this object MUST be rejected Attempts to change this object MUST be rejected (in case of SNMP
(in case of SNMP with the error inconsistentValue), if the with the error inconsistentValue), if the link is Up or
link is Up or Initializing. Attempts to change this object to Initializing. Attempts to change this object to an unsupported
an unsupported bonding scheme (see gBondPeerSchemesSupported) bonding scheme (see gBondPortCapPeerSchemesSupported) SHALL be
SHALL be rejected (in case of SNMP with the error wrongValue). rejected (in case of SNMP with the error wrongValue).
This object MUST be maintained in a persistent manner.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupPeerAdminBondScheme." aGroupPeerAdminBondScheme."
REFERENCE REFERENCE
"[TR-159] 5.5.1.7" "[TR-159] 5.5.1.7"
::= { gBondPortConfEntry 2 } ::= { gBondPortConfEntry 2 }
gBondDiscoveryCode OBJECT-TYPE gBondPortConfDiscoveryCode OBJECT-TYPE
SYNTAX PhysAddress (SIZE(6)) SYNTAX PhysAddress (SIZE(6))
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A Discovery Code of the G.Bond port (GBS). "A Discovery Code of the G.Bond port (GBS).
A unique 6 octet long code used by the Discovery function. A unique 6 octet long code used by the Discovery function.
This object MUST be instantiated for the -O subtype GBS before This object MUST be instantiated for the -O subtype GBS before
writing operations on the gBondBceRemoteDiscoveryCode writing operations on the gBondBceConfRemoteDiscoveryCode
(Set_if_Clear and Clear_if_Same) are performed by BCEs (Set_if_Clear and Clear_if_Same) are performed by BCEs
associated with the GBS. associated with the GBS.
The initial value of this object for -R subtype ports after The initial value of this object for -R subtype ports after
reset is all zeroes. For -R subtype ports, the value of this reset is all zeroes. For -R subtype ports, the value of this
object cannot be changed directly. This value may be changed object cannot be changed directly. This value may be changed
as a result of writing operation on the as a result of writing operation on the
gBondBceRemoteDiscoveryCode object of remote BCE of -O gBondBceConfRemoteDiscoveryCode object of remote BCE of -O
subtype, connected to one of the local BCEs associated with subtype, connected to one of the local BCEs associated with
the GBS. the GBS.
Discovery MUST be performed when the link is Down. Discovery MUST be performed when the link is Down.
Attempts to change this object MUST be rejected (in case of Attempts to change this object MUST be rejected (in case of
SNMP with the error inconsistentValue), if the link is Up or SNMP with the error inconsistentValue), if the link is Up or
Initializing. Initializing.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupDiscoveryCode." aGroupDiscoveryCode."
REFERENCE REFERENCE
"[TR-159] 5.5.1.20; [802.3] 61.2.2.8.3, 61.2.2.8.4, "[TR-159] 5.5.1.20; [802.3] 61.2.2.8.3, 61.2.2.8.4,
45.2.6.6.1, 45.2.6.8, 61A.2" 45.2.6.6.1, 45.2.6.8, 61A.2"
::= { gBondPortConfEntry 3 } ::= { gBondPortConfEntry 3 }
gBondTargetUpDataRate OBJECT-TYPE gBondPortConfTargetUpDataRate OBJECT-TYPE
SYNTAX Unsigned32(0|1..10000000) SYNTAX Unsigned32(0|1..10000000)
UNITS "Kbps" UNITS "Kbps"
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A desired G.Bond port Data Rate in the upstream direction, "A desired G.Bond port Data Rate in the upstream direction,
in Kbps, to be achieved during initialization, under in Kbps, to be achieved during initialization, under
restrictions placed upon the member BCEs by their respective restrictions placed upon the member BCEs by their respective
configuration settings. configuration settings.
This object represents a sum of individual BCE upstream data This object represents a sum of individual BCE upstream data
rates, modified to compensate for fragmentation and rates, modified to compensate for fragmentation and
encapsulation overhead (e.g., for an Ethernet service, the encapsulation overhead (e.g., for an Ethernet service, the
target data rate of 10Mbps SHALL allow lossless transmission target data rate of 10Mbps SHALL allow lossless transmission
of full-duplex 10Mbps Ethernet frame stream with minimal of full-duplex 10Mbps Ethernet frame stream with minimal
inter-frame gap). inter-frame gap).
Note that the target upstream data rate may not be achieved Note that the target upstream data rate may not be achieved
during initialization (e.g., due to unavailability of required during initialization (e.g., due to unavailability of required
BCEs) or the initial bandwidth could deteriorate, so that the BCEs) or the initial bandwidth could deteriorate, so that the
actual upstream data rate (gBondUpDataRate) could be less actual upstream data rate (gBondPortStatUpDataRate) could be less
than gBondTargetUpDataRate. than gBondPortConfTargetUpDataRate.
The value is limited above by 10 Gbps, to accommodate very The value is limited above by 10 Gbps, to accommodate very
high speed bonded xDSL interfaces (e.g. 32 x 100Mbps). high speed bonded xDSL interfaces (e.g. 32 x 100Mbps).
The value between 1 and 10000000 indicates that the total The value between 1 and 10000000 indicates that the total
upstream data rate of the G.Bond port after initialization upstream data rate of the G.Bond port after initialization
SHALL be equal to the target data rate or less, if the target SHALL be equal to the target data rate or less, if the target
upstream data rate cannot be achieved under the restrictions upstream data rate cannot be achieved under the restrictions
configured for BCEs. In case the copper environment allows to configured for BCEs. In case the copper environment allows to
achieve higher upstream data rate than that specified by this achieve higher upstream data rate than that specified by this
skipping to change at page 28, line 35 skipping to change at page 29, line 7
restrictions and with desired SNR Margin per BCE. restrictions and with desired SNR Margin per BCE.
This object is read-write for the -O subtype G.Bond ports This object is read-write for the -O subtype G.Bond ports
and irrelevant for the -R subtypes. and irrelevant for the -R subtypes.
Changing of the Target Upstream Data Rate MUST be performed Changing of the Target Upstream Data Rate MUST be performed
when the link is Down. Attempts to change this object MUST be when the link is Down. Attempts to change this object MUST be
rejected (In case of SNMP with the error inconsistentValue), rejected (In case of SNMP with the error inconsistentValue),
if the link is Up or Initializing. if the link is Up or Initializing.
This object MUST be maintained in a persistent manner.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupTargetUpRate." aGroupTargetUpRate."
REFERENCE REFERENCE
"[TR-159] 5.5.1.17" "[TR-159] 5.5.1.17"
::= { gBondPortConfEntry 4 } ::= { gBondPortConfEntry 4 }
gBondTargetDnDataRate OBJECT-TYPE gBondPortConfTargetDnDataRate OBJECT-TYPE
SYNTAX Unsigned32(0|1..10000000) SYNTAX Unsigned32(0|1..10000000)
UNITS "Kbps" UNITS "Kbps"
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A desired G.Bond port Data Rate in the downstream direction, "A desired G.Bond port Data Rate in the downstream direction,
in Kbps, to be achieved during initialization, under in Kbps, to be achieved during initialization, under
restrictions placed upon the member BCEs by their respective restrictions placed upon the member BCEs by their respective
configuration settings. configuration settings.
This object represents a sum of individual BCE downstream data This object represents a sum of individual BCE downstream data
rates, modified to compensate for fragmentation and rates, modified to compensate for fragmentation and
encapsulation overhead (e.g., for an Ethernet service, the encapsulation overhead (e.g., for an Ethernet service, the
target data rate of 10Mbps SHALL allow lossless transmission target data rate of 10Mbps SHALL allow lossless transmission
of full-duplex 10Mbps Ethernet frame stream with minimal of full-duplex 10Mbps Ethernet frame stream with minimal
inter-frame gap). inter-frame gap).
Note that the target downstream data rate may not be achieved Note that the target downstream data rate may not be achieved
during initialization (e.g., due to unavailability of required during initialization (e.g., due to unavailability of required
BCEs) or the initial bandwidth could deteriorate, so that the BCEs) or the initial bandwidth could deteriorate, so that the
actual downstream data rate (gBondDnDataRate) could be less actual downstream data rate (gBondPortStatDnDataRate) could be
than gBondTargetDnDataRate. less than gBondPortConfTargetDnDataRate.
The value is limited above by 10 Gbps, to accommodate very The value is limited above by 10 Gbps, to accommodate very
high speed bonded xDSL interfaces (e.g. 32 x 100Mbps). high speed bonded xDSL interfaces (e.g. 32 x 100Mbps).
The value between 1 and 10000000 indicates that the total The value between 1 and 10000000 indicates that the total
downstream data rate of the G.Bond port after initialization downstream data rate of the G.Bond port after initialization
SHALL be equal to the target data rate or less, if the target SHALL be equal to the target data rate or less, if the target
downstream data rate cannot be achieved under the restrictions downstream data rate cannot be achieved under the restrictions
configured for BCEs. In case the copper environment allows to configured for BCEs. In case the copper environment allows to
achieve higher downstream data rate than that specified by achieve higher downstream data rate than that specified by
skipping to change at page 29, line 43 skipping to change at page 30, line 13
restrictions and with desired SNR Margin per BCE. restrictions and with desired SNR Margin per BCE.
This object is read-write for the -O subtype G.Bond ports This object is read-write for the -O subtype G.Bond ports
and irrelevant for the -R subtypes. and irrelevant for the -R subtypes.
Changing of the Target Downstream Data Rate MUST be performed Changing of the Target Downstream Data Rate MUST be performed
when the link is Down. Attempts to change this object MUST be when the link is Down. Attempts to change this object MUST be
rejected (In case of SNMP with the error inconsistentValue), rejected (In case of SNMP with the error inconsistentValue),
if the link is Up or Initializing. if the link is Up or Initializing.
This object MUST be maintained in a persistent manner.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupTargetDownRate." aGroupTargetDownRate."
REFERENCE REFERENCE
"[TR-159] 5.5.1.18" "[TR-159] 5.5.1.18"
::= { gBondPortConfEntry 5 } ::= { gBondPortConfEntry 5 }
gBondThreshLowUpRate OBJECT-TYPE gBondPortConfThreshLowUpRate OBJECT-TYPE
SYNTAX Unsigned32(1..10000000) SYNTAX Unsigned32(1..10000000)
UNITS "Kbps" UNITS "Kbps"
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object configures the G.Bond port low upstream rate "This object configures the G.Bond port low upstream rate
crossing alarm threshold. When the current value of crossing alarm threshold. When the current value of
gBondUpDataRate for this port reaches/drops below or exceeds gBondPortStatUpDataRate for this port reaches/drops below or
this threshold, a gBondLowUpRateCrossing notification MAY be exceeds this threshold, a gBondLowUpRateCrossing notification
generated if enabled by gBondLowRateCrossingEnable. MAY be generated if enabled by
gBondPortConfLowRateCrossingEnable.
This object is read-write for the -O subtype G.Bond ports This object is read-write for the -O subtype G.Bond ports
and irrelevant for the -R subtypes. and irrelevant for the -R subtypes.
This object MUST be maintained in a persistent manner.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupthreshLowUpRate." aGroupthreshLowUpRate."
REFERENCE REFERENCE
"[TR-159] 5.5.1.21" "[TR-159] 5.5.1.21"
::= { gBondPortConfEntry 6 } ::= { gBondPortConfEntry 6 }
gBondThreshLowDnRate OBJECT-TYPE gBondPortConfThreshLowDnRate OBJECT-TYPE
SYNTAX Unsigned32(1..10000000) SYNTAX Unsigned32(1..10000000)
UNITS "Kbps" UNITS "Kbps"
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object configures the G.Bond port low downstream rate "This object configures the G.Bond port low downstream rate
crossing alarm threshold. When the current value of crossing alarm threshold. When the current value of
gBondDnDataRate for this port reaches/drops below or exceeds gBondPortStatDnDataRate for this port reaches/drops below or
this threshold, a gBondLowDnRateCrossing notification MAY exceeds this threshold, a gBondLowDnRateCrossing notification
be generated if enabled by gBondLowRateCrossingEnable. MAY be generated if enabled by
gBondPortConfLowRateCrossingEnable.
This object is read-write for the -O subtype G.Bond ports This object is read-write for the -O subtype G.Bond ports
and irrelevant for the -R subtypes. and irrelevant for the -R subtypes.
This object MUST be maintained in a persistent manner.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupThreshDownUpRate." aGroupThreshDownUpRate."
REFERENCE REFERENCE
"[TR-159] 5.5.1.22" "[TR-159] 5.5.1.22"
::= { gBondPortConfEntry 7 } ::= { gBondPortConfEntry 7 }
gBondLowRateCrossingEnable OBJECT-TYPE gBondPortConfLowRateCrossingEnable OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates whether gBondLowUpRateCrossing and "Indicates whether gBondLowUpRateCrossing and
gBondLowDnRateCrossing notifications should be generated gBondLowDnRateCrossing notifications should be generated
for this interface. for this interface.
Value of true(1) indicates that the notifications are enabled. Value of true(1) indicates that the notifications are enabled.
Value of false(2) indicates that the notifications are Value of false(2) indicates that the notifications are
disabled. disabled.
This object is read-write for the -O subtype G.Bond ports This object is read-write for the -O subtype G.Bond ports
and irrelevant for the -R subtypes. and irrelevant for the -R subtypes.
This object MUST be maintained in a persistent manner.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupLowRateCrossingEnable." aGroupLowRateCrossingEnable."
REFERENCE REFERENCE
"[TR-159] 5.5.1.23" "[TR-159] 5.5.1.23"
::= { gBondPortConfEntry 8 } ::= { gBondPortConfEntry 8 }
gBondPerfTcaConfProfile OBJECT-TYPE gBondPortConfPmTcaConfProfile OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32)) SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The value of this object is the index of the row in the GBS "The value of this object is the index of the row in the GBS
port Alarm Configuration Profile Table for Performance Monitoring port Alarm Configuration Profile Table for Performance Monitoring
Threshold Crossing Alerts - gBondPortAlarmConfProfileTable, Threshold Crossing Alerts - gBondPortAlarmConfProfileTable,
which applies to this GBS port. which applies to this GBS port."
This object MUST be maintained in a persistent manner."
DEFVAL { "DEFVAL" } DEFVAL { "DEFVAL" }
::= { gBondPortConfEntry 9 } ::= { gBondPortConfEntry 9 }
gBondPerfTcaEnable OBJECT-TYPE gBondPortConfPmTcaEnable OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates whether gBondPerfTca*Crossing set of notifications "Indicates whether gBondPerfTca*Crossing set of notifications
should be generated for this interface. should be generated for this interface.
Value of true(1) indicates that the notifications are enabled. Value of true(1) indicates that the notifications are enabled.
Value of false(2) indicates that the notifications are Value of false(2) indicates that the notifications are
disabled. disabled.
This object MUST be maintained in a persistent manner.
This object maps to the TR-159 attribute aGroupPerfTcaEnable." This object maps to the TR-159 attribute aGroupPerfTcaEnable."
REFERENCE REFERENCE
"[TR-159] 5.5.1.38" "[TR-159] 5.5.1.38"
::= { gBondPortConfEntry 10 } ::= { gBondPortConfEntry 10 }
gBondPortCapabilityTable OBJECT-TYPE gBondPortCapTable OBJECT-TYPE
SYNTAX SEQUENCE OF GBondPortCapabilityEntry SYNTAX SEQUENCE OF GBondPortCapEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Table for capabilities of G.Bond Ports. Entries in this table "Table for capabilities of G.Bond Ports. Entries in this table
MUST be maintained in a persistent manner" MUST be maintained in a persistent manner"
::= { gBondPort 2 } ::= { gBondPort 2 }
gBondPortCapabilityEntry OBJECT-TYPE gBondPortCapEntry OBJECT-TYPE
SYNTAX GBondPortCapabilityEntry SYNTAX GBondPortCapEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry in the G.Bond Port Capability table. "An entry in the G.Bond Port Capability table.
Each entry represents a G.Bond port indexed by the ifIndex. Each entry represents a G.Bond port indexed by the ifIndex.
Note that a G.Bond GBS port runs on top of a single Note that a G.Bond GBS port runs on top of a single
or multiple BCE port(s), which are also indexed by ifIndex." or multiple BCE port(s), which are also indexed by ifIndex."
INDEX { ifIndex } INDEX { ifIndex }
::= { gBondPortCapabilityTable 1 } ::= { gBondPortCapTable 1 }
GBondPortCapabilityEntry ::= GBondPortCapEntry ::=
SEQUENCE { SEQUENCE {
gBondSchemesSupported GBondSchemeList, gBondPortCapSchemesSupported GBondSchemeList,
gBondPeerSchemesSupported GBondSchemeList, gBondPortCapPeerSchemesSupported GBondSchemeList,
gBondCapacity Unsigned32, gBondPortCapCapacity Unsigned32,
gBondPeerCapacity Unsigned32 gBondPortCapPeerCapacity Unsigned32
} }
gBondSchemesSupported OBJECT-TYPE gBondPortCapSchemesSupported OBJECT-TYPE
SYNTAX GBondSchemeList SYNTAX GBondSchemeList
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Bonding Capability of the G.Bond port (GBS). This is a "Bonding Capability of the G.Bond port (GBS). This is a
read-only bitmap of the possible bonding schemes supported by read-only bitmap of the possible bonding schemes supported by
the GBS. The various bit-positions are: the GBS. The various bit-positions are:
g9981(1) - GBS is capable of G.998.1 bonding g9981(1) - GBS is capable of G.998.1 bonding
g9982(2) - GBS is capable of G.998.2 bonding g9982(2) - GBS is capable of G.998.2 bonding
g9983(3) - GBS is capable of G.998.3 bonding g9983(3) - GBS is capable of G.998.3 bonding
Note that for ports supporting multiple bonding schemes the Note that for ports supporting multiple bonding schemes the
actual administrative scheme is set via gBondAdminScheme actual administrative scheme is set via gBondPortConfAdminScheme
object. The current operating bonding scheme is reflected in object. The current operating bonding scheme is reflected in
the gBondOperScheme. the gBondPortStatOperScheme.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupBondSchemesSupported." aGroupBondSchemesSupported."
REFERENCE REFERENCE
"[TR-159] 5.5.1.2" "[TR-159] 5.5.1.2"
::= { gBondPortCapabilityEntry 1 } ::= { gBondPortCapEntry 1 }
gBondPeerSchemesSupported OBJECT-TYPE gBondPortCapPeerSchemesSupported OBJECT-TYPE
SYNTAX GBondSchemeList SYNTAX GBondSchemeList
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Bonding Capability of the peer G.Bond port (GBS). This is a "Bonding Capability of the peer G.Bond port (GBS). This is a
read-only bitmap of the possible bonding schemes supported by read-only bitmap of the possible bonding schemes supported by
the link partner GBS. The various bit-positions are: the link partner GBS. The various bit-positions are:
unknown(0) - GBS does not support bonding or unknown(0) - GBS does not support bonding or
the peer unit could not be reached. the peer unit could not be reached.
g9981(1) - GBS is capable of G.998.1 bonding g9981(1) - GBS is capable of G.998.1 bonding
g9982(2) - GBS is capable of G.998.2 bonding g9982(2) - GBS is capable of G.998.2 bonding
g9983(3) - GBS is capable of G.998.3 bonding g9983(3) - GBS is capable of G.998.3 bonding
Note that for ports supporting multiple bonding schemes the Note that for ports supporting multiple bonding schemes the
actual administrative scheme is set via gBondPeerAdminScheme actual administrative scheme is set via
object. The current operating bonding scheme is reflected in gBondPortConfPeerAdminScheme object. The current operating
the gBondPeerOperScheme. bonding scheme is reflected in the gBondPortStatPeerOperScheme.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupBondPeerSchemesSupported." aGroupBondPeerSchemesSupported."
REFERENCE REFERENCE
"[TR-159] 5.5.1.3" "[TR-159] 5.5.1.3"
::= { gBondPortCapabilityEntry 2 } ::= { gBondPortCapEntry 2 }
gBondCapacity OBJECT-TYPE gBondPortCapCapacity OBJECT-TYPE
SYNTAX Unsigned32 (1..32) SYNTAX Unsigned32 (1..32)
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Number of BCEs that can be aggregated by the local GBS. "Number of BCEs that can be aggregated by the local GBS.
The number of BCEs currently assigned to a particular G.Bond The number of BCEs currently assigned to a particular G.Bond
port (gBondNumBCEs) is never greater than gBondCapacity. port (gBondPortStatNumBCEs) is never greater than
gBondPortCapCapacity.
This object maps to the TR-159 attribute aGroupCapacity." This object maps to the TR-159 attribute aGroupCapacity."
REFERENCE REFERENCE
"[TR-159] 5.5.1.12" "[TR-159] 5.5.1.12"
::= { gBondPortCapEntry 3 }
::= { gBondPortCapabilityEntry 3 } gBondPortCapPeerCapacity OBJECT-TYPE
gBondPeerCapacity OBJECT-TYPE
SYNTAX Unsigned32 (0|1..32) SYNTAX Unsigned32 (0|1..32)
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Number of BCEs that can be aggregated by the peer GBS port. "Number of BCEs that can be aggregated by the peer GBS port.
Value of 0 is returned when peer Bonding Capacity is unknown Value of 0 is returned when peer Bonding Capacity is unknown
(peer cannot be reached). (peer cannot be reached).
This object maps to the TR-159 attribute aGroupPeerCapacity." This object maps to the TR-159 attribute aGroupPeerCapacity."
REFERENCE REFERENCE
"[TR-159] 5.5.1.13" "[TR-159] 5.5.1.13"
::= { gBondPortCapabilityEntry 4 } ::= { gBondPortCapEntry 4 }
gBondPortStatusTable OBJECT-TYPE gBondPortStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF GBondPortStatusEntry SYNTAX SEQUENCE OF GBondPortStatEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table provides overall status information of G.Bond "This table provides overall status information of G.Bond
ports, complementing the generic status information from the ports, complementing the generic status information from the
ifTable of IF-MIB. Additional status information about ifTable of IF-MIB. Additional status information about
connected BCEs is available from the relevant line MIBs connected BCEs is available from the relevant line MIBs
This table contains live data from the equipment. As such, This table contains live data from the equipment. As such,
it is NOT persistent." it is NOT persistent."
::= { gBondPort 3 } ::= { gBondPort 3 }
gBondPortStatusEntry OBJECT-TYPE gBondPortStatEntry OBJECT-TYPE
SYNTAX GBondPortStatusEntry SYNTAX GBondPortStatEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry in the G.Bond Port Status table. "An entry in the G.Bond Port Status table.
Each entry represents a G.Bond port indexed by the ifIndex. Each entry represents a G.Bond port indexed by the ifIndex.
Note that a G.Bond GBS port runs on top of a single Note that a G.Bond GBS port runs on top of a single
or multiple BCE port(s), which are also indexed by ifIndex." or multiple BCE port(s), which are also indexed by ifIndex."
INDEX { ifIndex } INDEX { ifIndex }
::= { gBondPortStatusTable 1 } ::= { gBondPortStatTable 1 }
GBondPortStatusEntry ::= GBondPortStatEntry ::=
SEQUENCE { SEQUENCE {
gBondOperScheme GBondScheme, gBondPortStatOperScheme GBondScheme,
gBondPeerOperScheme GBondScheme, gBondPortStatPeerOperScheme GBondScheme,
gBondUpDataRate Gauge32, gBondPortStatUpDataRate Gauge32,
gBondDnDataRate Gauge32, gBondPortStatDnDataRate Gauge32,
gBondFltStatus BITS, gBondPortStatFltStatus BITS,
gBondPortSide INTEGER, gBondPortStatSide INTEGER,
gBondNumBCEs Unsigned32 gBondPortStatNumBCEs Unsigned32
} }
gBondOperScheme OBJECT-TYPE gBondPortStatOperScheme OBJECT-TYPE
SYNTAX GBondScheme SYNTAX GBondScheme
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Current operating bonding scheme of a G.Bond port. "Current operating bonding scheme of a G.Bond port.
The possible values are: The possible values are:
g9981(1) - G.998.1 bonding g9981(1) - G.998.1 bonding
g9982(2) - G.998.2 bonding g9982(2) - G.998.2 bonding
g9983(3) - G.998.3 bonding g9983(3) - G.998.3 bonding
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupOperBondScheme." aGroupOperBondScheme."
REFERENCE REFERENCE
"[TR-159] 5.5.1.4" "[TR-159] 5.5.1.4"
::= { gBondPortStatusEntry 1 } ::= { gBondPortStatEntry 1 }
gBondPeerOperScheme OBJECT-TYPE gBondPortStatPeerOperScheme OBJECT-TYPE
SYNTAX GBondScheme SYNTAX GBondScheme
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Current operating bonding scheme of a G.Bond port link partner. "Current operating bonding scheme of a G.Bond port link partner.
The possible values are: The possible values are:
unknown(0) - peer cannot be reached due to the link state unknown(0) - peer cannot be reached due to the link state
g9981(1) - G.998.1 bonding g9981(1) - G.998.1 bonding
g9982(2) - G.998.2 bonding g9982(2) - G.998.2 bonding
g9983(3) - G.998.3 bonding g9983(3) - G.998.3 bonding
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupPeerOperBondScheme." aGroupPeerOperBondScheme."
REFERENCE REFERENCE
"[TR-159] 5.5.1.5" "[TR-159] 5.5.1.5"
::= { gBondPortStatusEntry 2 } ::= { gBondPortStatEntry 2 }
gBondUpDataRate OBJECT-TYPE gBondPortStatUpDataRate OBJECT-TYPE
SYNTAX Gauge32 SYNTAX Gauge32
UNITS "bps" UNITS "bps"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A current G.Bond port operational Data Rate in the upstream "A current G.Bond port operational Data Rate in the upstream
direction, in bps. direction, in bps.
This object represents an estimation of the sum of individual This object represents an estimation of the sum of individual
BCE upstream data rates, modified to compensate for BCE upstream data rates, modified to compensate for
fragmentation and encapsulation overhead (e.g., for an fragmentation and encapsulation overhead (e.g., for an
Ethernet service, the target data rate of 10Mbps SHALL allow Ethernet service, the target data rate of 10Mbps SHALL allow
lossless transmission of full-duplex 10Mbps Ethernet frame lossless transmission of full-duplex 10Mbps Ethernet frame
stream with minimal inter-frame gap). stream with minimal inter-frame gap).
Note that for symmetrical interfaces gBondUpDataRate == Note that for symmetrical interfaces gBondPortStatUpDataRate ==
gBondDnDataRate == ifSpeed. gBondPortStatDnDataRate == ifSpeed.
This object maps to the TR-159 attribute aGroupUpRate." This object maps to the TR-159 attribute aGroupUpRate."
REFERENCE REFERENCE
"[TR-159] 5.5.1.15" "[TR-159] 5.5.1.15"
::= { gBondPortStatusEntry 3 } ::= { gBondPortStatEntry 3 }
gBondDnDataRate OBJECT-TYPE gBondPortStatDnDataRate OBJECT-TYPE
SYNTAX Gauge32 SYNTAX Gauge32
UNITS "bps" UNITS "bps"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A current G.Bond port operational Data Rate in the downstream "A current G.Bond port operational Data Rate in the downstream
direction, in bps. direction, in bps.
This object represents an estimation of the sum of individual This object represents an estimation of the sum of individual
BCE downstream data rates, modified to compensate for BCE downstream data rates, modified to compensate for
fragmentation and encapsulation overhead (e.g., for an fragmentation and encapsulation overhead (e.g., for an
Ethernet service, the target data rate of 10Mbps SHALL allow Ethernet service, the target data rate of 10Mbps SHALL allow
lossless transmission of full-duplex 10Mbps Ethernet frame lossless transmission of full-duplex 10Mbps Ethernet frame
stream with minimal inter-frame gap). stream with minimal inter-frame gap).
Note that for symmetrical interfaces gBondUpDataRate == Note that for symmetrical interfaces gBondPortStatUpDataRate ==
gBondDnDataRate == ifSpeed. gBondPortStatDnDataRate == ifSpeed.
This object maps to the TR-159 attribute aGroupDownRate." This object maps to the TR-159 attribute aGroupDownRate."
REFERENCE REFERENCE
"[TR-159] 5.5.1.16" "[TR-159] 5.5.1.16"
::= { gBondPortStatusEntry 4 } ::= { gBondPortStatEntry 4 }
gBondFltStatus OBJECT-TYPE gBondPortStatFltStatus OBJECT-TYPE
SYNTAX BITS { SYNTAX BITS {
noPeer(0), noPeer(0),
peerPowerLoss(1), peerPowerLoss(1),
peerBondSchemeMismatch(2), peerBondSchemeMismatch(2),
bceSubTypeMismatch(3), bceSubTypeMismatch(3),
lowRate(4) lowRate(4)
} }
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
skipping to change at page 37, line 23 skipping to change at page 37, line 30
failure due to loss of local power failure due to loss of local power
('Dying Gasp'). ('Dying Gasp').
peerBondSchemeMismatch - operating bonding scheme of a peer peerBondSchemeMismatch - operating bonding scheme of a peer
GBS is different from the local one. GBS is different from the local one.
bceSubTypeMismatch - local BCEs in the aggregation group bceSubTypeMismatch - local BCEs in the aggregation group
are not of the same sub-type, e.g., are not of the same sub-type, e.g.,
some BCEs in the local device are -O some BCEs in the local device are -O
while others are -R subtype. while others are -R subtype.
lowRate - gBondUpRate/gBondDnRate of the port lowRate - gBondUpRate/gBondDnRate of the port
has reached or dropped below has reached or dropped below
gBondThreshLowUpRate/ gBondPortConfThreshLowUpRate/
gBondThreshLowUpRate. gBondPortConfThreshLowDnRate.
This object is intended to supplement ifOperStatus object This object is intended to supplement ifOperStatus object
in IF-MIB and ifMauMediaAvailable in MAU-MIB. in IF-MIB and ifMauMediaAvailable in MAU-MIB.
This object maps to the TR-159 attribute aGroupStatus." This object maps to the TR-159 attribute aGroupStatus."
REFERENCE REFERENCE
"[TR-159] 5.5.1.9; IF-MIB, ifOperStatus; MAU-MIB, "[TR-159] 5.5.1.9; IF-MIB, ifOperStatus; MAU-MIB,
ifMauMediaAvailable" ifMauMediaAvailable"
::= { gBondPortStatusEntry 5 } ::= { gBondPortStatEntry 5 }
gBondPortSide OBJECT-TYPE gBondPortStatSide OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
subscriber(1), subscriber(1),
office(2), office(2),
unknown(3) unknown(3)
} }
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"G.Bond port mode of operation (subtype). "G.Bond port mode of operation (subtype).
The value of 'subscriber' indicates the port is designated as The value of 'subscriber' indicates the port is designated as
'-R' subtype (all BCEs assigned to this port are of subtype '-R' subtype (all BCEs assigned to this port are of subtype
'-R'). '-R').
The value of the 'office' indicates that the port is The value of the 'office' indicates that the port is
designated as '-O' subtype (all BCEs assigned to this port are designated as '-O' subtype (all BCEs assigned to this port are
of subtype '-O'). of subtype '-O').
The value of 'unknown' indicates that the port has no assigned The value of 'unknown' indicates that the port has no assigned
BCEs yet or that the assigned BCEs are not of the same side BCEs yet or that the assigned BCEs are not of the same side
(subTypeBCEMismatch). (subTypeBCEMismatch).
skipping to change at page 38, line 10 skipping to change at page 38, line 18
The value of the 'office' indicates that the port is The value of the 'office' indicates that the port is
designated as '-O' subtype (all BCEs assigned to this port are designated as '-O' subtype (all BCEs assigned to this port are
of subtype '-O'). of subtype '-O').
The value of 'unknown' indicates that the port has no assigned The value of 'unknown' indicates that the port has no assigned
BCEs yet or that the assigned BCEs are not of the same side BCEs yet or that the assigned BCEs are not of the same side
(subTypeBCEMismatch). (subTypeBCEMismatch).
This object maps to the TR-159 attribute aGroupEnd." This object maps to the TR-159 attribute aGroupEnd."
REFERENCE REFERENCE
"[TR-159] 5.5.1.11" "[TR-159] 5.5.1.11"
::= { gBondPortStatusEntry 6 } ::= { gBondPortStatEntry 6 }
gBondNumBCEs OBJECT-TYPE gBondPortStatNumBCEs OBJECT-TYPE
SYNTAX Unsigned32 (0..32) SYNTAX Unsigned32 (0..32)
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Number of BCEs that is currently aggregated by the local GBS "Number of BCEs that is currently aggregated by the local GBS
(assigned to the G.Bond port using ifStackTable). (assigned to the G.Bond port using ifStackTable).
This number is never greater than gBondCapacity. This number is never greater than gBondPortCapCapacity.
This object SHALL be automatically incremented or decremented This object SHALL be automatically incremented or decremented
when a BCE is added or deleted to/from the G.Bond port using when a BCE is added or deleted to/from the G.Bond port using
ifStackTable. ifStackTable.
This object maps to the TR-159 attribute aGroupNumChannels" This object maps to the TR-159 attribute aGroupNumChannels"
REFERENCE REFERENCE
"[TR-159] 5.5.1.14" "[TR-159] 5.5.1.14"
::= { gBondPortStatusEntry 7 } ::= { gBondPortStatEntry 7 }
-- Performance Monitoring group -- Performance Monitoring group
gBondPortPM OBJECT IDENTIFIER ::= { gBondPort 4 } gBondPortPM OBJECT IDENTIFIER ::= { gBondPort 4 }
gBondPortPerfCurrTable OBJECT-TYPE gBondPortPmCurTable OBJECT-TYPE
SYNTAX SEQUENCE OF GBondPortPerfCurrEntry SYNTAX SEQUENCE OF GBondPortPmCurEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table contains current Performance Monitoring (PM) "This table contains current Performance Monitoring (PM)
information for a GBS port. This table contains live data from information for a GBS port. This table contains live data from
the equipment and as such is NOT persistent." the equipment and as such is NOT persistent."
::= { gBondPortPM 1 } ::= { gBondPortPM 1 }
gBondPortPerfCurrEntry OBJECT-TYPE gBondPortPmCurEntry OBJECT-TYPE
SYNTAX GBondPortPerfCurrEntry SYNTAX GBondPortPmCurEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry in the G.Bond Port PM table. "An entry in the G.Bond Port PM table.
Each entry represents a G.Bond port indexed by the ifIndex. Each entry represents a G.Bond port indexed by the ifIndex.
Note that a G.Bond GBS port runs on top of a single Note that a G.Bond GBS port runs on top of a single
or multiple BCE port(s), which are also indexed by ifIndex." or multiple BCE port(s), which are also indexed by ifIndex."
INDEX { ifIndex } INDEX { ifIndex }
::= { gBondPortPerfCurrTable 1 } ::= { gBondPortPmCurTable 1 }
GBondPortPerfCurrEntry ::= GBondPortPmCurEntry ::=
SEQUENCE { SEQUENCE {
gBondPerfES HCPerfTotalCount, gBondPortPmCurES HCPerfTotalCount,
gBondPerfSES HCPerfTotalCount, gBondPortPmCurSES HCPerfTotalCount,
gBondPerfUAS HCPerfTotalCount, gBondPortPmCurUAS HCPerfTotalCount,
gBondPerf15MinValidIntervals HCPerfValidIntervals, gBondPortPmCur15MinValidIntervals HCPerfValidIntervals,
gBondPerf15MinInvalidIntervals HCPerfInvalidIntervals, gBondPortPmCur15MinInvalidIntervals HCPerfInvalidIntervals,
gBondPerfCurr15MinTimeElapsed HCPerfTimeElapsed, gBondPortPmCur15MinTimeElapsed HCPerfTimeElapsed,
gBondPerfCurr15MinES HCPerfCurrentCount, gBondPortPmCur15MinES HCPerfCurrentCount,
gBondPerfCurr15MinSES HCPerfCurrentCount, gBondPortPmCur15MinSES HCPerfCurrentCount,
gBondPerfCurr15MinUAS HCPerfCurrentCount, gBondPortPmCur15MinUAS HCPerfCurrentCount,
gBondPerf1DayValidIntervals Unsigned32, gBondPortPmCur1DayValidIntervals Unsigned32,
gBondPerf1DayInvalidIntervals Unsigned32, gBondPortPmCur1DayInvalidIntervals Unsigned32,
gBondPerfCurr1DayTimeElapsed HCPerfTimeElapsed, gBondPortPmCur1DayTimeElapsed HCPerfTimeElapsed,
gBondPerfCurr1DayES HCPerfCurrentCount, gBondPortPmCur1DayES HCPerfCurrentCount,
gBondPerfCurr1DaySES HCPerfCurrentCount, gBondPortPmCur1DaySES HCPerfCurrentCount,
gBondPerfCurr1DayUAS HCPerfCurrentCount gBondPortPmCur1DayUAS HCPerfCurrentCount
} }
gBondPerfES OBJECT-TYPE gBondPortPmCurES OBJECT-TYPE
SYNTAX HCPerfTotalCount SYNTAX HCPerfTotalCount
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only count of Errored Seconds (ES) on the GBS since the "A count of Errored Seconds (ES) on the GBS since the BTU was
BTU was last restarted. last restarted.
An Errored Second for a G.998.x interface is defined as a count An Errored Second for a G.998.x interface is defined as a count
of 1-second intervals during which one or more GBS errors are of 1-second intervals during which one or more GBS errors are
declared. The errors are specific for each bonding scheme, e.g. declared. The errors are specific for each bonding scheme, e.g.
- lost cells for the ATM bonding; - lost cells for the ATM bonding;
- lost or discarded (due to an error or a buffer overflow) - lost or discarded (due to an error or a buffer overflow)
fragments for the Ethernet bonding; fragments for the Ethernet bonding;
- CRC4, CRC6 or CRC8 errors for the TDIM bonding - CRC4, CRC6 or CRC8 errors for the TDIM bonding
This object is inhibited during Unavailable Seconds (UAS). This object is inhibited during Unavailable Seconds (UAS).
This object maps to the TR-159 attribute aGroupPerfES." This object maps to the TR-159 attribute aGroupPerfES."
REFERENCE REFERENCE
"[TR-159] 5.5.1.29" "[TR-159] 5.5.1.29"
::= { gBondPortPerfCurrEntry 1 } ::= { gBondPortPmCurEntry 1 }
gBondPerfSES OBJECT-TYPE gBondPortPmCurSES OBJECT-TYPE
SYNTAX HCPerfTotalCount SYNTAX HCPerfTotalCount
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only count of Severely Errored Seconds (SES) on the GBS "A count of Severely Errored Seconds (SES) on the GBS since the
since the BTU was last restarted. BTU was last restarted.
A Severely Errored Second for a G.998.x interface is defined as A Severely Errored Second for a G.998.x interface is defined as
a count of 1-second intervals during which GBS errors cause at a count of 1-second intervals during which GBS errors cause at
least 1% traffic loss of the nominal bonded link rate or at least 1% traffic loss of the nominal bonded link rate or at
least 12ms for the TDM traffic. The exact definition is specific least 12ms for the TDM traffic. The exact definition is specific
for each bonding scheme, e.g. for each bonding scheme, e.g.
- 234 lost cells for the ATM bonding with 10Mbps nominal link - 234 lost cells for the ATM bonding with 10Mbps nominal link
rate rate
- 60 lost/discarded fragments for the Ethernet bonding with - 60 lost/discarded fragments for the Ethernet bonding with
10Mbps nominal link rate and fixed 192 Byte-long fragment 10Mbps nominal link rate and fixed 192 Byte-long fragment
size. size.
- 6 or more CRC4, one or more CRC6 or one or more CRC8 errors - 6 or more CRC4, one or more CRC6 or one or more CRC8 errors
for the TDM bonding for the TDM bonding
This object is inhibited during Unavailable Seconds (UAS). This object is inhibited during Unavailable Seconds (UAS).
This object maps to the TR-159 attribute aGroupPerfSES." This object maps to the TR-159 attribute aGroupPerfSES."
REFERENCE REFERENCE
"[TR-159] 5.5.1.30" "[TR-159] 5.5.1.30"
::= { gBondPortPerfCurrEntry 2 } ::= { gBondPortPmCurEntry 2 }
gBondPerfUAS OBJECT-TYPE gBondPortPmCurUAS OBJECT-TYPE
SYNTAX HCPerfTotalCount SYNTAX HCPerfTotalCount
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only count of Unavailable Seconds (UAS) on the GBS since "A count of Unavailable Seconds (UAS) on the GBS since the BTU
the BTU was last restarted. was last restarted.
An Unavailable Second for a G.998.x interface is defined as a An Unavailable Second for a G.998.x interface is defined as a
count of 1-second intervals during which the bonded link is count of 1-second intervals during which the bonded link is
unavailable. The G.998.x link becomes unavailable at the onset unavailable. The G.998.x link becomes unavailable at the onset
of 10 contiguous SESs. The 10 SESs are included in the of 10 contiguous SESs. The 10 SESs are included in the
unavailable time. Once unavailable, the G.998.x line becomes unavailable time. Once unavailable, the G.998.x line becomes
available at the onset of 10 contiguous seconds with no SESs. available at the onset of 10 contiguous seconds with no SESs.
The 10 seconds with no SESs are excluded from unavailable time. The 10 seconds with no SESs are excluded from unavailable time.
This object maps to the TR-159 attribute aGroupPerfUAS." This object maps to the TR-159 attribute aGroupPerfUAS."
REFERENCE REFERENCE
"[TR-159] 5.5.1.31" "[TR-159] 5.5.1.31"
::= { gBondPortPerfCurrEntry 3 } ::= { gBondPortPmCurEntry 3 }
gBondPerf15MinValidIntervals OBJECT-TYPE gBondPortPmCur15MinValidIntervals OBJECT-TYPE
SYNTAX HCPerfValidIntervals SYNTAX HCPerfValidIntervals
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only number of 15-minute intervals for which data was "A number of 15-minute intervals for which data was collected.
collected. The value of this object will be 96 or the maximum The value of this object will be 96 or the maximum number of
number of 15-minute history intervals collected by the 15-minute history intervals collected by the implementation
implementation unless the measurement was (re-)started recently, unless the measurement was (re-)started recently, in which case
in which case the value will be the number of complete 15 the value will be the number of complete 15 minutes intervals
minutes intervals for which there are at least some data. for which there are at least some data.
In certain cases it is possible that some intervals are In certain cases it is possible that some intervals are
unavailable. In this case, this object reports the maximum unavailable. In this case, this object reports the maximum
interval number for which data is available. interval number for which data is available.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupPerf15MinValidIntervals." aGroupPerf15MinValidIntervals."
REFERENCE REFERENCE
"[TR-159] 5.5.1.32" "[TR-159] 5.5.1.32"
::= { gBondPortPerfCurrEntry 4 } ::= { gBondPortPmCurEntry 4 }
gBondPerf15MinInvalidIntervals OBJECT-TYPE gBondPortPmCur15MinInvalidIntervals OBJECT-TYPE
SYNTAX HCPerfInvalidIntervals SYNTAX HCPerfInvalidIntervals
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only number of 15-minute intervals for which data was "A number of 15-minute intervals for which data was not always
not always available. The value will typically be zero except in available. The value will typically be zero except in cases
cases where the data for some intervals are not available. where the data for some intervals are not available.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupPerf15MinInvalidIntervals." aGroupPerf15MinInvalidIntervals."
REFERENCE REFERENCE
"[TR-159] 5.5.1.33" "[TR-159] 5.5.1.33"
::= { gBondPortPerfCurrEntry 5 } ::= { gBondPortPmCurEntry 5 }
gBondPerfCurr15MinTimeElapsed OBJECT-TYPE gBondPortPmCur15MinTimeElapsed OBJECT-TYPE
SYNTAX HCPerfTimeElapsed SYNTAX HCPerfTimeElapsed
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only count of seconds that have elapsed since the "A count of seconds that have elapsed since the beginning of the
beginning of the current 15-minute performance interval. current 15-minute performance interval.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupPerfCurr15MinTimeElapsed." aGroupPerfCurr15MinTimeElapsed."
REFERENCE REFERENCE
"[TR-159] 5.5.1.34" "[TR-159] 5.5.1.34"
::= { gBondPortPerfCurrEntry 6 } ::= { gBondPortPmCurEntry 6 }
gBondPerfCurr15MinES OBJECT-TYPE gBondPortPmCur15MinES OBJECT-TYPE
SYNTAX HCPerfCurrentCount SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only count of Errored Seconds (ES) on the GBS in the "A count of Errored Seconds (ES) on the GBS in the current
current 15-minute performance interval. 15-minute performance interval.
This object maps to the TR-159 attribute aGroupPerfCurr15MinES." This object maps to the TR-159 attribute aGroupPerfCurr15MinES."
REFERENCE REFERENCE
"[TR-159] 5.5.1.35" "[TR-159] 5.5.1.35"
::= { gBondPortPerfCurrEntry 7 } ::= { gBondPortPmCurEntry 7 }
gBondPerfCurr15MinSES OBJECT-TYPE gBondPortPmCur15MinSES OBJECT-TYPE
SYNTAX HCPerfCurrentCount SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only count of Severely Errored Seconds (ES) on the GBS "A count of Severely Errored Seconds (ES) on the GBS in the
in the current 15-minute performance interval. current 15-minute performance interval.
This object maps to the TR-159 attribute aGroupPerfCurr15MinSES." This object maps to the TR-159 attribute aGroupPerfCurr15MinSES."
REFERENCE REFERENCE
"[TR-159] 5.5.1.36" "[TR-159] 5.5.1.36"
::= { gBondPortPerfCurrEntry 8 } ::= { gBondPortPmCurEntry 8 }
gBondPerfCurr15MinUAS OBJECT-TYPE gBondPortPmCur15MinUAS OBJECT-TYPE
SYNTAX HCPerfCurrentCount SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only count of Unavailable Seconds (UAS) on the GBS in "A count of Unavailable Seconds (UAS) on the GBS in the current
the current 15-minute performance interval. 15-minute performance interval.
This object maps to the TR-159 attribute aGroupPerfCurr15MinUAS." This object maps to the TR-159 attribute aGroupPerfCurr15MinUAS."
REFERENCE REFERENCE
"[TR-159] 5.5.1.37" "[TR-159] 5.5.1.37"
::= { gBondPortPerfCurrEntry 9 } ::= { gBondPortPmCurEntry 9 }
gBondPerf1DayValidIntervals OBJECT-TYPE gBondPortPmCur1DayValidIntervals OBJECT-TYPE
SYNTAX Unsigned32 (0..7) SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only number of 1-day intervals for which data was "A number of 1-day intervals for which data was collected.
collected. The value of this object will be 7 or the maximum The value of this object will be 7 or the maximum number of
number of 1-day history intervals collected by the 1-day history intervals collected by the implementation unless
implementation unless the measurement was (re-)started recently, the measurement was (re-)started recently, in which case the
in which case the value will be the number of complete 1-day value will be the number of complete 1-day intervals for which
intervals for which there are at least some data. there are at least some data.
In certain cases it is possible that some intervals are In certain cases it is possible that some intervals are
unavailable. In this case, this object reports the maximum unavailable. In this case, this object reports the maximum
interval number for which data is available. interval number for which data is available.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupPerf1DayValidIntervals." aGroupPerf1DayValidIntervals."
REFERENCE REFERENCE
"[TR-159] 5.5.1.45" "[TR-159] 5.5.1.45"
::= { gBondPortPerfCurrEntry 10 } ::= { gBondPortPmCurEntry 10 }
gBondPerf1DayInvalidIntervals OBJECT-TYPE gBondPortPmCur1DayInvalidIntervals OBJECT-TYPE
SYNTAX Unsigned32 (0..7) SYNTAX Unsigned32 (0..7)
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only number of 1-day intervals for which data was "A number of 1-day intervals for which data was not always
not always available. The value will typically be zero except in available. The value will typically be zero except in cases
cases where the data for some intervals are not available. where the data for some intervals are not available.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupPerf1DayInvalidIntervals." aGroupPerf1DayInvalidIntervals."
REFERENCE REFERENCE
"[TR-159] 5.5.1.46" "[TR-159] 5.5.1.46"
::= { gBondPortPerfCurrEntry 11 } ::= { gBondPortPmCurEntry 11 }
gBondPerfCurr1DayTimeElapsed OBJECT-TYPE gBondPortPmCur1DayTimeElapsed OBJECT-TYPE
SYNTAX HCPerfTimeElapsed SYNTAX HCPerfTimeElapsed
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only count of seconds that have elapsed since the "A count of seconds that have elapsed since the beginning of
beginning of the current 1-day performance interval. the current 1-day performance interval.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupPerfCurr1DayTimeElapsed." aGroupPerfCurr1DayTimeElapsed."
REFERENCE REFERENCE
"[TR-159] 5.5.1.47" "[TR-159] 5.5.1.47"
::= { gBondPortPerfCurrEntry 12 } ::= { gBondPortPmCurEntry 12 }
gBondPerfCurr1DayES OBJECT-TYPE gBondPortPmCur1DayES OBJECT-TYPE
SYNTAX HCPerfCurrentCount SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only count of Errored Seconds (ES) on the GBS in the "A count of Errored Seconds (ES) on the GBS in the current 1-day
current 1-day performance interval. performance interval.
This object maps to the TR-159 attribute aGroupPerfCurr1DayES." This object maps to the TR-159 attribute aGroupPerfCurr1DayES."
REFERENCE REFERENCE
"[TR-159] 5.5.1.48" "[TR-159] 5.5.1.48"
::= { gBondPortPerfCurrEntry 13 } ::= { gBondPortPmCurEntry 13 }
gBondPerfCurr1DaySES OBJECT-TYPE gBondPortPmCur1DaySES OBJECT-TYPE
SYNTAX HCPerfCurrentCount SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only count of Severely Errored Seconds (ES) on the GBS "A count of Severely Errored Seconds (ES) on the GBS in the
in the current 1-day performance interval. current 1-day performance interval.
This object maps to the TR-159 attribute aGroupPerfCurr1DaySES." This object maps to the TR-159 attribute aGroupPerfCurr1DaySES."
REFERENCE REFERENCE
"[TR-159] 5.5.1.49" "[TR-159] 5.5.1.49"
::= { gBondPortPerfCurrEntry 14 } ::= { gBondPortPmCurEntry 14 }
gBondPerfCurr1DayUAS OBJECT-TYPE gBondPortPmCur1DayUAS OBJECT-TYPE
SYNTAX HCPerfCurrentCount SYNTAX HCPerfCurrentCount
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only count of Unavailable Seconds (UAS) on the GBS in "A count of Unavailable Seconds (UAS) on the GBS in the current
the current 1-day performance interval. 1-day performance interval.
This object maps to the TR-159 attribute aGroupPerfCurr1DayUAS." This object maps to the TR-159 attribute aGroupPerfCurr1DayUAS."
REFERENCE REFERENCE
"[TR-159] 5.5.1.50" "[TR-159] 5.5.1.50"
::= { gBondPortPerfCurrEntry 15 } ::= { gBondPortPmCurEntry 15 }
-- PM history: 15-min buckets -- PM history: 15-min buckets
gBondPortPerf15MinTable OBJECT-TYPE gBondPortPm15MinTable OBJECT-TYPE
SYNTAX SEQUENCE OF GBondPortPerf15MinEntry SYNTAX SEQUENCE OF GBondPortPm15MinEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table contains historical 15-minute buckets of Performance "This table contains historical 15-minute buckets of Performance
Monitoring information for a GBS port (a row for each 15-minute Monitoring information for a GBS port (a row for each 15-minute
interval, up to 96 intervals). interval, up to 96 intervals).
Entries in this table MUST be maintained in a persistent manner." Entries in this table MUST be maintained in a persistent manner."
::= { gBondPortPM 2 } ::= { gBondPortPM 2 }
gBondPortPerf15MinEntry OBJECT-TYPE gBondPortPm15MinEntry OBJECT-TYPE
SYNTAX GBondPortPerf15MinEntry SYNTAX GBondPortPm15MinEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry in the G.Bond Port historical 15-minute PM table. "An entry in the G.Bond Port historical 15-minute PM table.
Each entry represents performance monitoring data for a GBS port, Each entry represents performance monitoring data for a GBS port,
indexed by ifIndex, collected during a particular 15-minute indexed by ifIndex, collected during a particular 15-minute
interval, indexed by gBondPerf15MinIntervalIndex." interval, indexed by gBondPortPm15MinIntervalIndex."
INDEX { ifIndex, gBondPerf15MinIntervalIndex } INDEX { ifIndex, gBondPortPm15MinIntervalIndex }
::= { gBondPortPerf15MinTable 1 } ::= { gBondPortPm15MinTable 1 }
GBondPortPerf15MinEntry ::= GBondPortPm15MinEntry ::=
SEQUENCE { SEQUENCE {
gBondPerf15MinIntervalIndex Unsigned32, gBondPortPm15MinIntervalIndex Unsigned32,
gBondPerf15MinIntervalMoniTime HCPerfTimeElapsed, gBondPortPm15MinIntervalMoniTime HCPerfTimeElapsed,
gBondPerf15MinIntervalES HCPerfIntervalCount, gBondPortPm15MinIntervalES HCPerfIntervalCount,
gBondPerf15MinIntervalSES HCPerfIntervalCount, gBondPortPm15MinIntervalSES HCPerfIntervalCount,
gBondPerf15MinIntervalUAS HCPerfIntervalCount, gBondPortPm15MinIntervalUAS HCPerfIntervalCount,
gBondPerf15MinIntervalValid TruthValue gBondPortPm15MinIntervalValid TruthValue
} }
gBondPerf15MinIntervalIndex OBJECT-TYPE gBondPortPm15MinIntervalIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..96) SYNTAX Unsigned32 (1..96)
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Performance Data Interval number. 1 is the most recent previous "Performance Data Interval number. 1 is the most recent previous
interval; interval 96 is 24 hours ago. interval; interval 96 is 24 hours ago.
Intervals 2..96 are OPTIONAL. Intervals 2..96 are OPTIONAL.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupPerf15MinIntervalNumber." aGroupPerf15MinIntervalNumber."
REFERENCE REFERENCE
"[TR-159] 5.5.1.57" "[TR-159] 5.5.1.57"
::= { gBondPortPerf15MinEntry 1 } ::= { gBondPortPm15MinEntry 1 }
gBondPerf15MinIntervalMoniTime OBJECT-TYPE gBondPortPm15MinIntervalMoniTime OBJECT-TYPE
SYNTAX HCPerfTimeElapsed SYNTAX HCPerfTimeElapsed
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only count of seconds over which the performance data "A count of seconds over which the performance data was actually
was actually monitored. This value will be the same as the monitored. This value will be the same as the interval duration
interval duration (900 seconds), except in a situation where (900 seconds), except in a situation where performance data
performance data could not be collected for any reason." could not be collected for any reason."
::= { gBondPortPerf15MinEntry 2 } ::= { gBondPortPm15MinEntry 2 }
gBondPerf15MinIntervalES OBJECT-TYPE gBondPortPm15MinIntervalES OBJECT-TYPE
SYNTAX HCPerfIntervalCount SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only count of Errored Seconds (ES) on the GBS in the "A count of Errored Seconds (ES) on the GBS in the 15-minute
15-minute performance history interval. performance history interval.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupPerf15MinIntervalES." aGroupPerf15MinIntervalES."
REFERENCE REFERENCE
"[TR-159] 5.5.1.59" "[TR-159] 5.5.1.59"
::= { gBondPortPerf15MinEntry 3 } ::= { gBondPortPm15MinEntry 3 }
gBondPerf15MinIntervalSES OBJECT-TYPE gBondPortPm15MinIntervalSES OBJECT-TYPE
SYNTAX HCPerfIntervalCount SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only count of Severely Errored Seconds (ES) on the GBS "A count of Severely Errored Seconds (ES) on the GBS in the
in the 15-minute performance history interval. 15-minute performance history interval.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupPerf15MinIntervalSES." aGroupPerf15MinIntervalSES."
REFERENCE REFERENCE
"[TR-159] 5.5.1.60" "[TR-159] 5.5.1.60"
::= { gBondPortPerf15MinEntry 4 } ::= { gBondPortPm15MinEntry 4 }
gBondPerf15MinIntervalUAS OBJECT-TYPE gBondPortPm15MinIntervalUAS OBJECT-TYPE
SYNTAX HCPerfIntervalCount SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only count of Unavailable Seconds (UAS) on the GBS in "A count of Unavailable Seconds (UAS) on the GBS in the current
the current 15-minute performance interval. 15-minute performance interval.
This object maps to the TR-159 attribute aGroupPerfCurr15MinUAS." This object maps to the TR-159 attribute aGroupPerfCurr15MinUAS."
REFERENCE REFERENCE
"[TR-159] 5.5.1.61" "[TR-159] 5.5.1.61"
::= { gBondPortPerf15MinEntry 5 } ::= { gBondPortPm15MinEntry 5 }
gBondPerf15MinIntervalValid OBJECT-TYPE gBondPortPm15MinIntervalValid OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only object indicating whether or not this history "A read-only object indicating whether or not this history
bucket contains valid data. Valid bucket is reported as true(1) bucket contains valid data. Valid bucket is reported as true(1)
and invalid bucket as false(2). and invalid bucket as false(2).
If this history bucket is invalid the BTU-C MUST NOT produce If this history bucket is invalid the BTU-C MUST NOT produce
notifications based upon the value of the counters in this notifications based upon the value of the counters in this
bucket. bucket.
skipping to change at page 47, line 4 skipping to change at page 47, line 11
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only object indicating whether or not this history "A read-only object indicating whether or not this history
bucket contains valid data. Valid bucket is reported as true(1) bucket contains valid data. Valid bucket is reported as true(1)
and invalid bucket as false(2). and invalid bucket as false(2).
If this history bucket is invalid the BTU-C MUST NOT produce If this history bucket is invalid the BTU-C MUST NOT produce
notifications based upon the value of the counters in this notifications based upon the value of the counters in this
bucket. bucket.
Note that an implementation may decide not to store invalid Note that an implementation may decide not to store invalid
history buckets in its data base. In such case this object is history buckets in its data base. In such case this object is
not required as only valid history buckets are available while not required as only valid history buckets are available while
invalid history buckets are simply not in the data base. invalid history buckets are simply not in the data base.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupPerf15MinIntervalValid." aGroupPerf15MinIntervalValid."
REFERENCE REFERENCE
"[TR-159] 5.5.1.58" "[TR-159] 5.5.1.58"
::= { gBondPortPerf15MinEntry 6 } ::= { gBondPortPm15MinEntry 6 }
-- PM history: 1-day buckets -- PM history: 1-day buckets
gBondPortPerf1DayTable OBJECT-TYPE gBondPortPm1DayTable OBJECT-TYPE
SYNTAX SEQUENCE OF GBondPortPerf1DayEntry SYNTAX SEQUENCE OF GBondPortPm1DayEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table contains historical 1-day buckets of Performance "This table contains historical 1-day buckets of Performance
Monitoring information for a GBS port (a row for each 1-day Monitoring information for a GBS port (a row for each 1-day
interval, up to 7 intervals). interval, up to 7 intervals).
Entries in this table MUST be maintained in a persistent manner." Entries in this table MUST be maintained in a persistent manner."
::= { gBondPortPM 3 } ::= { gBondPortPM 3 }
gBondPortPerf1DayEntry OBJECT-TYPE gBondPortPm1DayEntry OBJECT-TYPE
SYNTAX GBondPortPerf1DayEntry SYNTAX GBondPortPm1DayEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry in the G.Bond Port historical 1-day PM table. "An entry in the G.Bond Port historical 1-day PM table.
Each entry represents performance monitoring data for a GBS port, Each entry represents performance monitoring data for a GBS port,
indexed by ifIndex, collected during a particular 1-day indexed by ifIndex, collected during a particular 1-day
interval, indexed by gBondPerf1DayIntervalIndex." interval, indexed by gBondPortPm1DayIntervalIndex."
INDEX { ifIndex, gBondPerf1DayIntervalIndex } INDEX { ifIndex, gBondPortPm1DayIntervalIndex }
::= { gBondPortPerf1DayTable 1 } ::= { gBondPortPm1DayTable 1 }
GBondPortPerf1DayEntry ::= GBondPortPm1DayEntry ::=
SEQUENCE { SEQUENCE {
gBondPerf1DayIntervalIndex Unsigned32, gBondPortPm1DayIntervalIndex Unsigned32,
gBondPerf1DayIntervalMoniTime HCPerfTimeElapsed, gBondPortPm1DayIntervalMoniTime HCPerfTimeElapsed,
gBondPerf1DayIntervalES HCPerfIntervalCount, gBondPortPm1DayIntervalES HCPerfIntervalCount,
gBondPerf1DayIntervalSES HCPerfIntervalCount, gBondPortPm1DayIntervalSES HCPerfIntervalCount,
gBondPerf1DayIntervalUAS HCPerfIntervalCount, gBondPortPm1DayIntervalUAS HCPerfIntervalCount,
gBondPerf1DayIntervalValid TruthValue gBondPortPm1DayIntervalValid TruthValue
} }
gBondPerf1DayIntervalIndex OBJECT-TYPE gBondPortPm1DayIntervalIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..7) SYNTAX Unsigned32 (1..7)
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Performance Data Interval number. 1 is the most recent previous "Performance Data Interval number. 1 is the most recent previous
interval; interval 7 is 7 days ago. interval; interval 7 is 7 days ago.
Intervals 2..7 are OPTIONAL. Intervals 2..7 are OPTIONAL.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupPerf1DayIntervalNumber." aGroupPerf1DayIntervalNumber."
REFERENCE REFERENCE
"[TR-159] 5.5.1.62" "[TR-159] 5.5.1.62"
::= { gBondPortPerf1DayEntry 1 } ::= { gBondPortPm1DayEntry 1 }
gBondPerf1DayIntervalMoniTime OBJECT-TYPE gBondPortPm1DayIntervalMoniTime OBJECT-TYPE
SYNTAX HCPerfTimeElapsed SYNTAX HCPerfTimeElapsed
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only count of seconds over which the performance data "A count of seconds over which the performance data was actually
was actually monitored. This value will be the same as the monitored. This value will be the same as the interval duration
interval duration (86400 seconds), except in a situation where (86400 seconds), except in a situation where performance data
performance data could not be collected for any reason. could not be collected for any reason.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupPerf1DayIntervalMoniSecs." aGroupPerf1DayIntervalMoniSecs."
REFERENCE REFERENCE
"[TR-159] 5.5.1.64" "[TR-159] 5.5.1.64"
::= { gBondPortPerf1DayEntry 2 } ::= { gBondPortPm1DayEntry 2 }
gBondPerf1DayIntervalES OBJECT-TYPE gBondPortPm1DayIntervalES OBJECT-TYPE
SYNTAX HCPerfIntervalCount SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only count of Errored Seconds (ES) on the GBS in the "A count of Errored Seconds (ES) on the GBS in the 1-day
1-day performance history interval. performance history interval.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupPerf1DayIntervalES." aGroupPerf1DayIntervalES."
REFERENCE REFERENCE
"[TR-159] 5.5.1.65" "[TR-159] 5.5.1.65"
::= { gBondPortPerf1DayEntry 3 }
gBondPerf1DayIntervalSES OBJECT-TYPE ::= { gBondPortPm1DayEntry 3 }
gBondPortPm1DayIntervalSES OBJECT-TYPE
SYNTAX HCPerfIntervalCount SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only count of Severely Errored Seconds (ES) on the GBS "A count of Severely Errored Seconds (ES) on the GBS in the
in the 1-day performance history interval. 1-day performance history interval.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupPerf1DayIntervalSES." aGroupPerf1DayIntervalSES."
REFERENCE REFERENCE
"[TR-159] 5.5.1.66" "[TR-159] 5.5.1.66"
::= { gBondPortPerf1DayEntry 4 } ::= { gBondPortPm1DayEntry 4 }
gBondPerf1DayIntervalUAS OBJECT-TYPE gBondPortPm1DayIntervalUAS OBJECT-TYPE
SYNTAX HCPerfIntervalCount SYNTAX HCPerfIntervalCount
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only count of Unavailable Seconds (UAS) on the GBS in "A count of Unavailable Seconds (UAS) on the GBS in the current
the current 1-day performance interval. 1-day performance interval.
This object maps to the TR-159 attribute aGroupPerfCurr1DayUAS." This object maps to the TR-159 attribute aGroupPerfCurr1DayUAS."
REFERENCE REFERENCE
"[TR-159] 5.5.1.67" "[TR-159] 5.5.1.67"
::= { gBondPortPerf1DayEntry 5 } ::= { gBondPortPm1DayEntry 5 }
gBondPerf1DayIntervalValid OBJECT-TYPE gBondPortPm1DayIntervalValid OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only object indicating whether or not this history "A read-only object indicating whether or not this history
bucket contains valid data. Valid bucket is reported as true(1) bucket contains valid data. Valid bucket is reported as true(1)
and invalid bucket as false(2). and invalid bucket as false(2).
If this history bucket is invalid the BTU-C MUST NOT produce If this history bucket is invalid the BTU-C MUST NOT produce
notifications based upon the value of the counters in this notifications based upon the value of the counters in this
bucket. bucket.
Note that an implementation may decide not to store invalid Note that an implementation may decide not to store invalid
history buckets in its data base. In such case this object is history buckets in its data base. In such case this object is
not required as only valid history buckets are available while not required as only valid history buckets are available while
invalid history buckets are simply not in the data base. invalid history buckets are simply not in the data base.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupPerf1DayIntervalValid." aGroupPerf1DayIntervalValid."
REFERENCE REFERENCE
"[TR-159] 5.5.1.63" "[TR-159] 5.5.1.63"
::= { gBondPortPerf1DayEntry 6 } ::= { gBondPortPm1DayEntry 6 }
-- Performance Monitoring TCA Configuration profile -- Performance Monitoring TCA Configuration profile
gBondPortPerfTcaConfProfileTable OBJECT-TYPE gBondPortPmTcaProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF GBondPortPerfTcaConfProfileEntry SYNTAX SEQUENCE OF GBondPortPmTcaProfileEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table supports definitions of Performance Monitoring (PM) "This table supports definitions of Performance Monitoring (PM)
Threshold Crossing Alerts (TCA) configuration profiles for GBS Threshold Crossing Alerts (TCA) configuration profiles for GBS
ports. ports.
Entries in this table MUST be maintained in a persistent manner." Entries in this table MUST be maintained in a persistent manner."
::= { gBondPortPM 4 } ::= { gBondPortPM 4 }
gBondPortPerfTcaConfProfileEntry OBJECT-TYPE gBondPortPmTcaProfileEntry OBJECT-TYPE
SYNTAX GBondPortPerfTcaConfProfileEntry SYNTAX GBondPortPmTcaProfileEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry in the GBS PM TCA Configuration table. "An entry in the GBS PM TCA Configuration table.
Each entry corresponds to a single TCA configuration profile. Each entry corresponds to a single TCA configuration profile.
Each profile contains a set of parameters for setting alarm Each profile contains a set of parameters for setting alarm
thresholds for various performance attributes monitored at GBS thresholds for various performance attributes monitored at GBS
ports. Profiles may be created/deleted using the row ports. Profiles may be created/deleted using the row
creation/deletion mechanism via creation/deletion mechanism via
gBondPerfTcaConfProfileRowStatus. If an active entry is gBondPortPmTcaProfileRowStatus. If an active entry is
referenced via gBondPerfTcaConfProfile, the entry MUST referenced via gBondPortConfPmTcaConfProfile, the entry MUST
remain active until all references are removed. remain active until all references are removed.
A default profile with an index of 'DEFVAL', will always exist A default profile with an index of 'DEFVAL', will always exist
and its parameters will be set to vendor specific values, and its parameters will be set to vendor specific values,
unless otherwise specified in this document." unless otherwise specified in this document."
INDEX { gBondPerfTcaConfProfileName } INDEX { gBondPortPmTcaProfileName }
::= { gBondPortPerfTcaConfProfileTable 1 } ::= { gBondPortPmTcaProfileTable 1 }
GBondPortPerfTcaConfProfileEntry ::= GBondPortPmTcaProfileEntry ::=
SEQUENCE { SEQUENCE {
gBondPerfTcaConfProfileName SnmpAdminString, gBondPortPmTcaProfileName SnmpAdminString,
gBondPerfThreshold15MinES HCPerfIntervalThreshold, gBondPortPmTcaProfileThresh15MinES HCPerfIntervalThreshold,
gBondPerfThreshold15MinSES HCPerfIntervalThreshold, gBondPortPmTcaProfileThresh15MinSES HCPerfIntervalThreshold,
gBondPerfThreshold15MinUAS HCPerfIntervalThreshold, gBondPortPmTcaProfileThresh15MinUAS HCPerfIntervalThreshold,
gBondPerfThreshold1DayES GBondPerf1DayIntervalThreshold, gBondPortPmTcaProfileThresh1DayES GBondPm1DayIntervalThreshold,
gBondPerfThreshold1DaySES GBondPerf1DayIntervalThreshold, gBondPortPmTcaProfileThresh1DaySES GBondPm1DayIntervalThreshold,
gBondPerfThreshold1DayUAS GBondPerf1DayIntervalThreshold, gBondPortPmTcaProfileThresh1DayUAS GBondPm1DayIntervalThreshold,
gBondPerfTcaConfProfileRowStatus RowStatus gBondPortPmTcaProfileRowStatus RowStatus
} }
gBondPerfTcaConfProfileName OBJECT-TYPE gBondPortPmTcaProfileName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32)) SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object is a unique index (name) associated with this "This object is a unique index (name) associated with this
GBS PM TCA profile." GBS PM TCA profile."
::= { gBondPortPerfTcaConfProfileEntry 1 } ::= { gBondPortPmTcaProfileEntry 1 }
gBondPerfThreshold15MinES OBJECT-TYPE gBondPortPmTcaProfileThresh15MinES OBJECT-TYPE
SYNTAX HCPerfIntervalThreshold SYNTAX HCPerfIntervalThreshold
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A desired threshold for the number of Errored Seconds (ES) "A desired threshold for the number of Errored Seconds (ES)
within any given 15-minute performance data collection interval. within any given 15-minute performance data collection interval.
If the number of ESs in a particular 15-minute collection If the number of ESs in a particular 15-minute collection
interval reaches or exceeds this value, a interval reaches or exceeds this value, a
gBondPerfTca15MinESCrossing notification MAY be generated if gBondPmTca15MinESCrossing notification MAY be generated if
enabled by gBondPerfTcaEnable. enabled by gBondPortConfPmTcaEnable.
At most one notification can be sent per interval. At most one notification can be sent per interval.
Setting this attribute to zero (default) effectively disables Setting this attribute to zero (default) effectively disables
gBondPerfTca15MinESCrossing notification. gBondPmTca15MinESCrossing notification.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupPerfThreshold15MinES." aGroupPerfThreshold15MinES."
REFERENCE REFERENCE
"[TR-159] 5.5.1.39" "[TR-159] 5.5.1.39"
::= { gBondPortPerfTcaConfProfileEntry 2 } ::= { gBondPortPmTcaProfileEntry 2 }
gBondPerfThreshold15MinSES OBJECT-TYPE gBondPortPmTcaProfileThresh15MinSES OBJECT-TYPE
SYNTAX HCPerfIntervalThreshold SYNTAX HCPerfIntervalThreshold
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A desired threshold for the number of Severely Errored Seconds "A desired threshold for the number of Severely Errored Seconds
(SES) within any given 15-minute performance data collection (SES) within any given 15-minute performance data collection
interval. interval.
If the number of SESs in a particular 15-minute collection If the number of SESs in a particular 15-minute collection
interval reaches or exceeds this value, a interval reaches or exceeds this value, a
gBondPerfTca15MinSESCrossing notification MAY be generated if gBondPmTca15MinSESCrossing notification MAY be generated if
enabled by gBondPerfTcaEnable. enabled by gBondPortConfPmTcaEnable.
At most one notification can be sent per interval. At most one notification can be sent per interval.
Setting this attribute to zero (default) effectively disables Setting this attribute to zero (default) effectively disables
gBondPerfTca15MinSESCrossing notification. gBondPmTca15MinSESCrossing notification.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupPerfThreshold15MinSES." aGroupPerfThreshold15MinSES."
REFERENCE REFERENCE
"[TR-159] 5.5.1.40" "[TR-159] 5.5.1.40"
::= { gBondPortPerfTcaConfProfileEntry 3 } ::= { gBondPortPmTcaProfileEntry 3 }
gBondPerfThreshold15MinUAS OBJECT-TYPE gBondPortPmTcaProfileThresh15MinUAS OBJECT-TYPE
SYNTAX HCPerfIntervalThreshold SYNTAX HCPerfIntervalThreshold
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A desired threshold for the number of Unavailable Seconds (UAS) "A desired threshold for the number of Unavailable Seconds (UAS)
within any given 15-minute performance data collection interval. within any given 15-minute performance data collection interval.
If the number of UASs in a particular 15-minute collection If the number of UASs in a particular 15-minute collection
interval reaches or exceeds this value, a interval reaches or exceeds this value, a
gBondPerfTca15MinUASCrossing notification MAY be generated if gBondPmTca15MinUASCrossing notification MAY be generated if
enabled by gBondPerfTcaEnable. enabled by gBondPortConfPmTcaEnable.
At most one notification can be sent per interval. At most one notification can be sent per interval.
Setting this attribute to zero (default) effectively disables Setting this attribute to zero (default) effectively disables
gBondPerfTca15MinUASCrossing notification. gBondPmTca15MinUASCrossing notification.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupPerfThreshold15MinUAS." aGroupPerfThreshold15MinUAS."
REFERENCE REFERENCE
"[TR-159] 5.5.1.41" "[TR-159] 5.5.1.41"
::= { gBondPortPerfTcaConfProfileEntry 4 } ::= { gBondPortPmTcaProfileEntry 4 }
gBondPerfThreshold1DayES OBJECT-TYPE gBondPortPmTcaProfileThresh1DayES OBJECT-TYPE
SYNTAX GBondPerf1DayIntervalThreshold SYNTAX GBondPm1DayIntervalThreshold
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A desired threshold for the number of Errored Seconds (ES) "A desired threshold for the number of Errored Seconds (ES)
within any given 1-day performance data collection interval. within any given 1-day performance data collection interval.
If the number of ESs in a particular 1-day collection interval If the number of ESs in a particular 1-day collection interval
reaches or exceeds this value, a gBondPerfTca1DayESCrossing reaches or exceeds this value, a gBondPmTca1DayESCrossing
notification MAY be generated if enabled by gBondPerfTcaEnable. notification MAY be generated if enabled by
gBondPortConfPmTcaEnable.
At most one notification can be sent per interval. At most one notification can be sent per interval.
Setting this attribute to zero (default) effectively disables Setting this attribute to zero (default) effectively disables
gBondPerfTca1DayESCrossing notification. gBondPmTca1DayESCrossing notification.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupPerfThreshold1DayES." aGroupPerfThreshold1DayES."
REFERENCE REFERENCE
"[TR-159] 5.5.1.51" "[TR-159] 5.5.1.51"
::= { gBondPortPerfTcaConfProfileEntry 5 } ::= { gBondPortPmTcaProfileEntry 5 }
gBondPerfThreshold1DaySES OBJECT-TYPE gBondPortPmTcaProfileThresh1DaySES OBJECT-TYPE
SYNTAX GBondPerf1DayIntervalThreshold SYNTAX GBondPm1DayIntervalThreshold
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A desired threshold for the number of Severely Errored Seconds "A desired threshold for the number of Severely Errored Seconds
(SES) within any given 1-day performance data collection (SES) within any given 1-day performance data collection
interval. interval.
If the number of SESs in a particular 1-day collection interval If the number of SESs in a particular 1-day collection interval
reaches or exceeds this value, a gBondPerfTca1DaySESCrossing reaches or exceeds this value, a gBondPmTca1DaySESCrossing
notification MAY be generated if enabled by gBondPerfTcaEnable. notification MAY be generated if enabled by
gBondPortConfPmTcaEnable.
At most one notification can be sent per interval. At most one notification can be sent per interval.
Setting this attribute to zero (default) effectively disables Setting this attribute to zero (default) effectively disables
gBondPerfTca1DaySESCrossing notification. gBondPmTca1DaySESCrossing notification.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupPerfThreshold1DaySES." aGroupPerfThreshold1DaySES."
REFERENCE REFERENCE
"[TR-159] 5.5.1.52" "[TR-159] 5.5.1.52"
::= { gBondPortPerfTcaConfProfileEntry 6 } ::= { gBondPortPmTcaProfileEntry 6 }
gBondPerfThreshold1DayUAS OBJECT-TYPE gBondPortPmTcaProfileThresh1DayUAS OBJECT-TYPE
SYNTAX GBondPerf1DayIntervalThreshold SYNTAX GBondPm1DayIntervalThreshold
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A desired threshold for the number of Unavailable Seconds (UAS) "A desired threshold for the number of Unavailable Seconds (UAS)
within any given 1-day performance data collection interval. within any given 1-day performance data collection interval.
If the number of UASs in a particular 1-day collection interval If the number of UASs in a particular 1-day collection interval
reaches or exceeds this value, a gBondPerfTca1DayUASCrossing reaches or exceeds this value, a gBondPmTca1DayUASCrossing
notification MAY be generated if enabled by gBondPerfTcaEnable. notification MAY be generated if enabled by
gBondPortConfPmTcaEnable.
At most one notification can be sent per interval. At most one notification can be sent per interval.
Setting this attribute to zero (default) effectively disables Setting this attribute to zero (default) effectively disables
gBondPerfTca1DayUASCrossing notification. gBondPmTca1DayUASCrossing notification.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupPerfThreshold1DayUAS." aGroupPerfThreshold1DayUAS."
REFERENCE REFERENCE
"[TR-159] 5.5.1.53" "[TR-159] 5.5.1.53"
::= { gBondPortPerfTcaConfProfileEntry 7 } ::= { gBondPortPmTcaProfileEntry 7 }
gBondPerfTcaConfProfileRowStatus OBJECT-TYPE gBondPortPmTcaProfileRowStatus OBJECT-TYPE
SYNTAX RowStatus SYNTAX RowStatus
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object controls the creation, modification, or deletion "This object controls the creation, modification, or deletion
of the associated entry in the gBondPortPerfTcaConfProfileTable of the associated entry in the gBondPortPmTcaProfileTable
per the semantics of RowStatus. per the semantics of RowStatus.
If an 'active' entry is referenced via gBondPerfTcaConfProfile If an 'active' entry is referenced via
instance(s), the entry MUST remain 'active'. gBondPortConfPmTcaConfProfile instance(s), the entry MUST
remain 'active'.
An 'active' entry SHALL NOT be modified. In order to modify an An 'active' entry SHALL NOT be modified. In order to modify an
existing entry, it MUST be taken out of service (by setting existing entry, it MUST be taken out of service (by setting
this object to 'notInService'), modified, and set 'active' this object to 'notInService'), modified, and set 'active'
again." again."
::= { gBondPortPmTcaProfileEntry 8 }
::= { gBondPortPerfTcaConfProfileEntry 8 }
-- The BCE group -- The BCE group
gBondBceConfTable OBJECT-TYPE gBondBceConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF GBondBceConfEntry SYNTAX SEQUENCE OF GBondBceConfEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Table for Configuration of G.Bond common aspects for the "Table for Configuration of G.Bond common aspects for the
Bonding Channel Entity (BCE) ports (modems/channels). Bonding Channel Entity (BCE) ports (modems/channels).
skipping to change at page 54, line 36 skipping to change at page 54, line 45
"An entry in the G.Bond BCE Configuration table. "An entry in the G.Bond BCE Configuration table.
Each entry represents common aspects of a G.Bond BCE port Each entry represents common aspects of a G.Bond BCE port
indexed by the ifIndex. Note that a G.Bond BCE port can be indexed by the ifIndex. Note that a G.Bond BCE port can be
stacked below a single GBS port, also indexed by ifIndex, stacked below a single GBS port, also indexed by ifIndex,
possibly together with other BCE ports if GAF is enabled." possibly together with other BCE ports if GAF is enabled."
INDEX { ifIndex } INDEX { ifIndex }
::= { gBondBceConfTable 1 } ::= { gBondBceConfTable 1 }
GBondBceConfEntry ::= GBondBceConfEntry ::=
SEQUENCE { SEQUENCE {
gBondBceRemoteDiscoveryCode PhysAddress gBondBceConfRemoteDiscoveryCode PhysAddress
} }
gBondBceRemoteDiscoveryCode OBJECT-TYPE gBondBceConfRemoteDiscoveryCode OBJECT-TYPE
SYNTAX PhysAddress (SIZE(0|6)) SYNTAX PhysAddress (SIZE(0|6))
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A Remote Discovery Code of the BCE port at CO. "A Remote Discovery Code of the BCE port at CO.
A 6 octet long Discovery Code of the peer GBS connected via A 6 octet long Discovery Code of the peer GBS connected via
the BCE. the BCE.
Reading this object results in a Discovery Get operation. Reading this object results in a Discovery Get operation.
Setting this object to all zeroes results in a Discovery Setting this object to all zeroes results in a Discovery
Clear_if_Same operation (the value of gBondDiscoveryCode Clear_if_Same operation (the value of gBondPortConfDiscoveryCode
at the peer GBS SHALL be the same as gBondDiscoveryCode of at the peer GBS SHALL be the same as gBondPortConfDiscoveryCode
the local GBS associated with the BCE for the operation to of the local GBS associated with the BCE for the operation to
succeed). succeed).
Writing a non-zero value to this object results in a Writing a non-zero value to this object results in a
Discovery Set_if_Clear operation. Discovery Set_if_Clear operation.
A zero-length octet string SHALL be returned on an attempt to A zero-length octet string SHALL be returned on an attempt to
read this object when GAF aggregation is not enabled. read this object when GAF aggregation is not enabled.
This object is irrelevant in BCE-R port subtypes (CPE side): This object is irrelevant in BCE-R port subtypes (CPE side):
in this case a zero length octet string SHALL be returned on in this case a zero length octet string SHALL be returned on
an attempt to read this object, writing to this object SHALL an attempt to read this object, writing to this object SHALL
be rejected. be rejected.
Discovery MUST be performed when the link is Down. Discovery MUST be performed when the link is Down.
Attempts to change this object MUST be rejected (in case of Attempts to change this object MUST be rejected (in case of
SNMP with the error inconsistentValue), if the link is Up or SNMP with the error inconsistentValue), If the link is Up or
Initializing. Initializing.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aLineRemoteDiscoveryCode." aLineRemoteDiscoveryCode."
REFERENCE REFERENCE
"[TR-159] 5.5.6.7" "[TR-159] 5.5.6.7"
::= { gBondBceConfEntry 1 } ::= { gBondBceConfEntry 1 }
-- --
-- Conformance Statements -- Conformance Statements
-- --
gBondGroups OBJECT IDENTIFIER ::= { gBondConformance 1 } gBondGroups OBJECT IDENTIFIER ::= { gBondConformance 1 }
gBondCompliances OBJECT IDENTIFIER ::= { gBondConformance 2 } gBondCompliances OBJECT IDENTIFIER ::= { gBondConformance 2 }
-- Object Groups -- Object Groups
gBondBasicGroup OBJECT-GROUP gBondBasicGroup OBJECT-GROUP
OBJECTS { OBJECTS {
gBondOperScheme, gBondPortStatOperScheme,
gBondUpDataRate, gBondPortStatUpDataRate,
gBondDnDataRate, gBondPortStatDnDataRate,
gBondTargetUpDataRate, gBondPortConfTargetUpDataRate,
gBondTargetDnDataRate, gBondPortConfTargetDnDataRate,
gBondOperScheme, gBondPortCapCapacity,
gBondCapacity, gBondPortStatNumBCEs,
gBondNumBCEs, gBondPortStatSide,
gBondPortSide, gBondPortStatFltStatus
gBondFltStatus
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A collection of objects representing management information "A collection of objects representing management information
common to all types of G.Bond ports." common to all types of G.Bond ports."
::= { gBondGroups 1 } ::= { gBondGroups 1 }
gBondDiscoveryGroup OBJECT-GROUP gBondDiscoveryGroup OBJECT-GROUP
OBJECTS { OBJECTS {
gBondPeerOperScheme, gBondPortStatPeerOperScheme,
gBondPeerCapacity, gBondPortCapPeerCapacity,
gBondDiscoveryCode, gBondPortConfDiscoveryCode,
gBondBceRemoteDiscoveryCode gBondBceConfRemoteDiscoveryCode
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A collection of objects supporting OPTIONAL G.Bond discovery "A collection of objects supporting OPTIONAL G.Bond discovery
in G.Bond ports." in G.Bond ports."
::= { gBondGroups 2 } ::= { gBondGroups 2 }
gBondMultiSchemeGroup OBJECT-GROUP gBondMultiSchemeGroup OBJECT-GROUP
OBJECTS { OBJECTS {
gBondSchemesSupported, gBondPortCapSchemesSupported,
gBondPeerSchemesSupported, gBondPortCapPeerSchemesSupported,
gBondAdminScheme, gBondPortConfAdminScheme,
gBondPeerAdminScheme gBondPortConfPeerAdminScheme
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A collection of objects providing OPTIONAL management "A collection of objects providing OPTIONAL management
information for G.Bond ports supporting multiple bonding information for G.Bond ports supporting multiple bonding
schemes." schemes."
::= { gBondGroups 3 } ::= { gBondGroups 3 }
gBondTcaConfGroup OBJECT-GROUP gBondTcaConfGroup OBJECT-GROUP
OBJECTS { OBJECTS {
gBondThreshLowUpRate, gBondPortConfThreshLowUpRate,
gBondThreshLowDnRate, gBondPortConfThreshLowDnRate,
gBondLowRateCrossingEnable gBondPortConfLowRateCrossingEnable
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A collection of objects required for configuration of alarm "A collection of objects required for configuration of alarm
thresholds and notifications in G.Bond ports." thresholds and notifications in G.Bond ports."
::= { gBondGroups 4 } ::= { gBondGroups 4 }
gBondTcaNotificationGroup NOTIFICATION-GROUP gBondTcaNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS { NOTIFICATIONS {
gBondLowUpRateCrossing, gBondLowUpRateCrossing,
gBondLowDnRateCrossing gBondLowDnRateCrossing
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This group supports notifications of significant conditions "This group supports notifications of significant conditions
(non-PM threshold crossing alerts) associated with G.Bond ports." (non-PM threshold crossing alerts) associated with G.Bond ports."
::= { gBondGroups 5 } ::= { gBondGroups 5 }
gBondPerfCurrGroup OBJECT-GROUP gBondPmCurGroup OBJECT-GROUP
OBJECTS { OBJECTS {
gBondPerfES, gBondPortPmCurES,
gBondPerfSES, gBondPortPmCurSES,
gBondPerfUAS, gBondPortPmCurUAS,
gBondPerf15MinValidIntervals, gBondPortPmCur15MinValidIntervals,
gBondPerf15MinInvalidIntervals, gBondPortPmCur15MinInvalidIntervals,
gBondPerfCurr15MinTimeElapsed, gBondPortPmCur15MinTimeElapsed,
gBondPerfCurr15MinES, gBondPortPmCur15MinES,
gBondPerfCurr15MinSES, gBondPortPmCur15MinSES,
gBondPerfCurr15MinUAS, gBondPortPmCur15MinUAS,
gBondPerf1DayValidIntervals, gBondPortPmCur1DayValidIntervals,
gBondPerf1DayInvalidIntervals, gBondPortPmCur1DayInvalidIntervals,
gBondPerfCurr1DayTimeElapsed, gBondPortPmCur1DayTimeElapsed,
gBondPerfCurr1DayES, gBondPortPmCur1DayES,
gBondPerfCurr1DaySES, gBondPortPmCur1DaySES,
gBondPerfCurr1DayUAS gBondPortPmCur1DayUAS
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A collection of objects supporting OPTIONAL current Performance "A collection of objects supporting OPTIONAL current Performance
Monitoring information for G.Bond ports." Monitoring information for G.Bond ports."
::= { gBondGroups 6 } ::= { gBondGroups 6 }
gBondPerf15MinGroup OBJECT-GROUP gBondPm15MinGroup OBJECT-GROUP
OBJECTS { OBJECTS {
gBondPerf15MinIntervalMoniTime, gBondPortPm15MinIntervalMoniTime,
gBondPerf15MinIntervalES, gBondPortPm15MinIntervalES,
gBondPerf15MinIntervalSES, gBondPortPm15MinIntervalSES,
gBondPerf15MinIntervalUAS, gBondPortPm15MinIntervalUAS,
gBondPerf15MinIntervalValid gBondPortPm15MinIntervalValid
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A collection of objects supporting OPTIONAL historical "A collection of objects supporting OPTIONAL historical
Performance Monitoring information for G.Bond ports, during Performance Monitoring information for G.Bond ports, during
previous 15-minute intervals ." previous 15-minute intervals ."
::= { gBondGroups 7 } ::= { gBondGroups 7 }
gBondPerf1DayGroup OBJECT-GROUP gBondPm1DayGroup OBJECT-GROUP
OBJECTS { OBJECTS {
gBondPerf1DayIntervalMoniTime, gBondPortPm1DayIntervalMoniTime,
gBondPerf1DayIntervalES, gBondPortPm1DayIntervalES,
gBondPerf1DayIntervalSES, gBondPortPm1DayIntervalSES,
gBondPerf1DayIntervalUAS, gBondPortPm1DayIntervalUAS,
gBondPerf1DayIntervalValid gBondPortPm1DayIntervalValid
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A collection of objects supporting OPTIONAL historical "A collection of objects supporting OPTIONAL historical
Performance Monitoring information for G.Bond ports, during Performance Monitoring information for G.Bond ports, during
previous 1-day intervals ." previous 1-day intervals ."
::= { gBondGroups 8 } ::= { gBondGroups 8 }
gBondPerfTcaConfGroup OBJECT-GROUP gBondPmTcaConfGroup OBJECT-GROUP
OBJECTS { OBJECTS {
gBondPerfTcaConfProfile, gBondPortConfPmTcaConfProfile,
gBondPerfTcaEnable, gBondPortConfPmTcaEnable,
gBondPerfThreshold15MinES, gBondPortPmTcaProfileThresh15MinES,
gBondPerfThreshold15MinSES, gBondPortPmTcaProfileThresh15MinSES,
gBondPerfThreshold15MinUAS, gBondPortPmTcaProfileThresh15MinUAS,
gBondPerfThreshold1DayES, gBondPortPmTcaProfileThresh1DayES,
gBondPerfThreshold1DaySES, gBondPortPmTcaProfileThresh1DaySES,
gBondPerfThreshold1DayUAS, gBondPortPmTcaProfileThresh1DayUAS,
gBondPerfTcaConfProfileRowStatus gBondPortPmTcaProfileRowStatus
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A collection of objects required for configuration of "A collection of objects required for configuration of
Performance Monitoring Threshold Crossing Alert notifications Performance Monitoring Threshold Crossing Alert notifications
in G.Bond ports." in G.Bond ports."
::= { gBondGroups 9 } ::= { gBondGroups 9 }
gBondPerfTcaNotificationGroup NOTIFICATION-GROUP gBondPmTcaNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS { NOTIFICATIONS {
gBondPerfTca15MinESCrossing, gBondPmTca15MinESCrossing,
gBondPerfTca15MinSESCrossing, gBondPmTca15MinSESCrossing,
gBondPerfTca15MinUASCrossing, gBondPmTca15MinUASCrossing,
gBondPerfTca1DayESCrossing, gBondPmTca1DayESCrossing,
gBondPerfTca1DaySESCrossing, gBondPmTca1DaySESCrossing,
gBondPerfTca1DayUASCrossing gBondPmTca1DayUASCrossing
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This group supports notifications of performance monitoring "This group supports notifications of performance monitoring
thresholds crossing alerts associated with G.Bond ports." thresholds crossing alerts associated with G.Bond ports."
::= { gBondGroups 10 } ::= { gBondGroups 10 }
-- Compliance Statements -- Compliance Statements
gBondCompliance MODULE-COMPLIANCE gBondCompliance MODULE-COMPLIANCE
skipping to change at page 59, line 40 skipping to change at page 59, line 49
GROUP gBondDiscoveryGroup GROUP gBondDiscoveryGroup
DESCRIPTION DESCRIPTION
"Support for this group is only required for implementations "Support for this group is only required for implementations
supporting G.Bond Discovery function." supporting G.Bond Discovery function."
GROUP gBondMultiSchemeGroup GROUP gBondMultiSchemeGroup
DESCRIPTION DESCRIPTION
"Support for this group is only required for implementations "Support for this group is only required for implementations
supporting multiple bonding schemes." supporting multiple bonding schemes."
GROUP gBondPerfCurrGroup GROUP gBondPmCurGroup
DESCRIPTION DESCRIPTION
"Support for this group is only required for implementations "Support for this group is only required for implementations
supporting Performance Monitoring." supporting Performance Monitoring."
GROUP gBondPerf15MinGroup GROUP gBondPm15MinGroup
DESCRIPTION DESCRIPTION
"Support for this group is only required for implementations "Support for this group is only required for implementations
supporting 15-min historical Performance Monitoring." supporting 15-min historical Performance Monitoring."
GROUP gBondPerf1DayGroup GROUP gBondPm1DayGroup
DESCRIPTION DESCRIPTION
"Support for this group is only required for implementations "Support for this group is only required for implementations
supporting 1-day historical Performance Monitoring." supporting 1-day historical Performance Monitoring."
GROUP gBondPerfTcaConfGroup GROUP gBondPmTcaConfGroup
DESCRIPTION DESCRIPTION
"Support for this group is only required for implementations "Support for this group is only required for implementations
supporting Performance Monitoring Threshold Crossing Alert supporting Performance Monitoring Threshold Crossing Alert
notifications." notifications."
GROUP gBondPerfTcaNotificationGroup GROUP gBondPmTcaNotificationGroup
DESCRIPTION DESCRIPTION
"Support for this group is only required for implementations "Support for this group is only required for implementations
supporting Performance Monitoring Threshold Crossing Alert supporting Performance Monitoring Threshold Crossing Alert
notifications." notifications."
::= { gBondCompliances 1 } ::= { gBondCompliances 1 }
END END
7. Security Considerations 7. Security Considerations
There is a number of managed objects defined in the GBOND-MIB module There is a number of managed objects defined in this MIB module with
that have a MAX-ACCESS clause of read-write or read-create. Most a MAX-ACCESS clause of read-write and/or read-create. Such objects
objects are writable only when the link is Down. Writing to these may be considered sensitive or vulnerable in some network
objects can have potentially disruptive effects on network operation, environments. The support for SET operations in a non-secure
for example: environment without proper protection can have a negative effect on
network operations. These are the tables and objects and their
sensitivity/vulnerability:
o Changing of gBondAdminScheme MAY lead to a potential locking of o Changing of gBondPortConfAdminScheme may lead to a potential
the link, if the peer device does not support desired bonding locking of the link, if the peer device does not support desired
scheme. bonding scheme.
o Changing of gBondDiscoveryCode, before the discovery operation, o Changing of gBondPortConfDiscoveryCode, before the discovery
MAY lead to a wrongful discovery, for example when two CO ports operation, may lead to a wrongful discovery, for example when two
are connected to the same multi-channel RT port, while both CO CO ports are connected to the same multi-channel RT port, while
ports have the same discovery register value. both CO ports have the same discovery register value.
o Changing GBS configuration parameters (e.g., profile of a GBS via o Changing of target upstream/downstream data rate via
gBondAdminProfile) MAY lead to anything from link quality and rate gBondPortConfTargetUpDataRate/gBondPortConfTargetDnDataRate may
degradation to a complete link initialization failure, as ability lead to anything from link quality and rate degradation to a
of a G.Bond port to support a particular configuration depends on complete link initialization failure, as ability of a G.Bond port
the copper environment. to support a particular configuration depends on the copper
environment.
o Activation of a specific line/channel MAY cause a severe o Activation of a specific line/channel may cause a severe
degradation of service for another G.Bond port, whose channel(s) degradation of service for another G.Bond port, whose channel(s)
MAY be affected by the cross-talk from the newly activated may be affected by the cross-talk from the newly activated
channel. channel.
o Removal of a channel from an operationally 'up' G.Bond port, o Removal of a channel from an operationally 'up' G.Bond port,
aggregating several channels, MAY cause port's rate degradation aggregating several channels, may cause port's rate degradation
The user of the GBOND-MIB module must therefore be aware that support Some of the readable objects in this MIB module (i.e., those with
for SET operations in a non-secure environment without proper MAX-ACCESS other than not-accessible) may be considered sensitive or
protection can have a negative effect on network operations. vulnerable in some network environments since, collectively, they
provide information about the performance of network interfaces and
can reveal some aspects of their configuration.
The readable objects in the GBOND-MIB module (i.e., those with MAX- In particular, since a bonded xDSL port can be comprised of multiple
ACCESS other than not-accessible) may be considered sensitive in some Unshielded Twisted Pair (UTP) voice grade copper, located in the same
environments since, collectively, they provide information about the bundle with other pairs belonging to another operator/customer, it is
performance of network interfaces and can reveal some aspects of theoretically possible to eavesdrop to a G.Bond transmission, simply
their configuration. In particular, since a bonded xDSL port can be by "listening" to a cross-talk from the bonded pairs, especially if
comprised of multiple Unshielded Twisted Pair (UTP) voice grade the operating parameters of the G.Bond link in question are known.
copper, located in the same bundle with other pairs belonging to
another operator/customer, it is theoretically possible to eavesdrop
to a G.Bond transmission, simply by "listening" to a cross-talk from
the bonded pairs, especially if the parameters of the G.Bond link in
question are known.
In such environments it is important to control also GET and NOTIFY It is thus important to control even GET and/or NOTIFY access to
access to these objects and possibly even to encrypt their values these objects and possibly even encrypt the values of these objects
when sending them over the network via SNMP. when sending them over the network via SNMP. These are the tables
and objects and their sensitivity/vulnerability:
o gBondPortStatTable - objects in this table provide status
information for the G.Bond port, which may aid in identification
of the pairs belonging to the bonded port and eavesdroping to the
traffic over that port.
SNMP versions prior to SNMPv3 did not include adequate security. SNMP versions prior to SNMPv3 did not include adequate security.
Even if the network itself is secure (for example by using IPSec), Even if the network itself is secure (for example by using IPSec),
even then, there is no control as to who on the secure network is there is no control as to who on the secure network is allowed to
allowed to access and GET/SET (read/change/create/delete) the objects access and GET/SET (read/change/create/delete) the objects in this
in this MIB module. MIB module.
It is RECOMMENDED that implementers consider the security features as Implementations MUST provide the security features described by the
provided by the SNMPv3 framework (see [RFC3410], section 8), SNMPv3 framework (see [RFC3410]), including full support for
including full support for the SNMPv3 cryptographic mechanisms (for authentication and privacy via the User-based Security Model (USM)
authentication and privacy). [RFC3414] with the AES cipher algorithm [RFC3826]. Implementations
MAY also provide support for the Transport Security Model (TSM)
[RFC5591] in combination with a secure transport such as SSH
[RFC5592] or TLS/DTLS [RFC6353].
Further, deployment of SNMP versions prior to SNMPv3 is NOT Further, deployment of SNMP versions prior to SNMPv3 is NOT
RECOMMENDED. Instead, it is RECOMMENDED to deploy SNMPv3 and to RECOMMENDED. Instead, it is RECOMMENDED to deploy SNMPv3 and to
enable cryptographic security. It is then a customer/operator enable cryptographic security. It is then a customer/operator
responsibility to ensure that the SNMP entity giving access to an responsibility to ensure that the SNMP entity giving access to an
instance of this MIB module is properly configured to give access to instance of this MIB module is properly configured to give access to
the objects only to those principals (users) that have legitimate the objects only to those principals (users) that have legitimate
rights to indeed GET or SET (change/create/delete) them. rights to indeed GET or SET (change/create/delete) them.
8. IANA Considerations 8. IANA Considerations
Three new values of IANAifType: g9981, g9982 and g9983 SHALL be Three new values of IANAifType: g9981(263), g9982(264) and g9983(265)
defined by the IANA [1] in the IANAifType-MIB module have been allocated by IANA [1] in the IANAifType-MIB module
[IANAifType-MIB], before this document is published as an RFC. [IANAifType-MIB].
Additionally, an object identifier for gBondMIB MODULE-IDENTITY SHALL An object identifier for gBondMIB MODULE-IDENTITY SHALL be allocated
be allocated by IANA in the MIB-2 transmission sub-tree, before this by IANA in the MIB-2 transmission sub-tree, before this document is
document is published. published.
9. Acknowledgments 9. Acknowledgments
This document was produced by the [ADSLMIB] working group. This document was produced by the [ADSLMIB] working group.
10. References 10. References
10.1. Normative References 10.1. Normative References
[RFC2119] Bradner, S., "Key words for use in [RFC2119] Bradner, S., "Key words for use in
skipping to change at page 64, line 21 skipping to change at page 64, line 40
[G.998.3] ITU-T, "Multi-pair bonding using [G.998.3] ITU-T, "Multi-pair bonding using
time-division inverse time-division inverse
multiplexing", ITU-T multiplexing", ITU-T
Recommendation G.998.3, Recommendation G.998.3,
January 2005, <http://www.itu.int/ January 2005, <http://www.itu.int/
rec/T-REC-G.998.3/en>. rec/T-REC-G.998.3/en>.
[I-D.ietf-adslmib-gbond-atm-mib] Beili, E., "ATM-based xDSL Bonded [I-D.ietf-adslmib-gbond-atm-mib] Beili, E., "ATM-based xDSL Bonded
Interfaces MIB", draft-ietf- Interfaces MIB", draft-ietf-
adslmib-gbond-atm-mib-04 (work in adslmib-gbond-atm-mib-05 (work in
progress), May 2011. progress), Feb 2012.
[I-D.ietf-adslmib-gbond-eth-mib] Beili, E. and M. Morgenstern, [I-D.ietf-adslmib-gbond-eth-mib] Beili, E. and M. Morgenstern,
"Ethernet-based xDSL Bonded "Ethernet-based xDSL Bonded
Interfaces MIB", draft-ietf- Interfaces MIB", draft-ietf-
adslmib-gbond-eth-mib-04 (work in adslmib-gbond-eth-mib-05 (work in
progress), May 2011. progress), February 2012.
[I-D.ietf-adslmib-gbond-tdim-mib] Beili, E., "TDIM-based xDSL Bonded [I-D.ietf-adslmib-gbond-tdim-mib] Beili, E., "TDIM-based xDSL Bonded
Interfaces MIB", draft-ietf- Interfaces MIB", draft-ietf-
adslmib-gbond-tdim-mib-06 (work in adslmib-gbond-tdim-mib-07 (work in
progress), May 2011. progress), Feb 2012.
[IANAifType-MIB] Internet Assigned Numbers [IANAifType-MIB] Internet Assigned Numbers
Authority (IANA), "IANAifType Authority (IANA), "IANAifType
Textual Convention definition", <h Textual Convention definition", <h
ttp://www.iana.org/assignments/ ttp://www.iana.org/assignments/
ianaiftype-mib>. ianaiftype-mib>.
[RFC2864] McCloghrie, K. and G. Hanson, "The [RFC2864] McCloghrie, K. and G. Hanson, "The
Inverted Stack Table Extension to Inverted Stack Table Extension to
the Interfaces Group MIB", the Interfaces Group MIB",
RFC 2864, June 2000. RFC 2864, June 2000.
[RFC3410] Case, J., Mundy, R., Partain, D., [RFC3410] Case, J., Mundy, R., Partain, D.,
and B. Stewart, "Introduction and and B. Stewart, "Introduction and
Applicability Statements for Applicability Statements for
Internet-Standard Management Internet-Standard Management
Framework", RFC 3410, Framework", RFC 3410,
December 2002. December 2002.
[RFC3413] Levi, D., Meyer, P., and B.
Stewart, "Simple Network
Management Protocol (SNMP)
Applications", STD 62, RFC 3413,
December 2002.
[RFC3414] Blumenthal, U. and B. Wijnen,
"User-based Security Model (USM)
for version 3 of the Simple
Network Management Protocol
(SNMPv3)", STD 62, RFC 3414,
December 2002.
[RFC3440] Ly, F. and G. Bathrick, [RFC3440] Ly, F. and G. Bathrick,
"Definitions of Extension Managed "Definitions of Extension Managed
Objects for Asymmetric Digital Objects for Asymmetric Digital
Subscriber Lines", RFC 3440, Subscriber Lines", RFC 3440,
December 2002. December 2002.
[RFC3593] Tesink, K., "Textual Conventions [RFC3593] Tesink, K., "Textual Conventions
for MIB Modules Using Performance for MIB Modules Using Performance
History Based on 15 Minute History Based on 15 Minute
Intervals", RFC 3593, Intervals", RFC 3593,
September 2003. September 2003.
[RFC3728] Ray, B. and R. Abbi, "Definitions [RFC3728] Ray, B. and R. Abbi, "Definitions
of Managed Objects for Very High of Managed Objects for Very High
Speed Digital Subscriber Lines Speed Digital Subscriber Lines
(VDSL)", RFC 3728, February 2004. (VDSL)", RFC 3728, February 2004.
[RFC3826] Blumenthal, U., Maino, F., and K.
McCloghrie, "The Advanced
Encryption Standard (AES) Cipher
Algorithm in the SNMP User-based
Security Model", RFC 3826,
June 2004.
[RFC4181] Heard, C., "Guidelines for Authors [RFC4181] Heard, C., "Guidelines for Authors
and Reviewers of MIB Documents", and Reviewers of MIB Documents",
BCP 111, RFC 4181, September 2005. BCP 111, RFC 4181, September 2005.
[RFC4319] Sikes, C., Ray, B., and R. Abbi, [RFC4319] Sikes, C., Ray, B., and R. Abbi,
"Definitions of Managed Objects "Definitions of Managed Objects
for High Bit-Rate DSL - 2nd for High Bit-Rate DSL - 2nd
generation (HDSL2) and Single-Pair generation (HDSL2) and Single-Pair
High-Speed Digital Subscriber Line High-Speed Digital Subscriber Line
(SHDSL) Lines", RFC 4319, (SHDSL) Lines", RFC 4319,
skipping to change at page 65, line 50 skipping to change at page 66, line 41
[RFC4836] Beili, E., "Definitions of Managed [RFC4836] Beili, E., "Definitions of Managed
Objects for IEEE 802.3 Medium Objects for IEEE 802.3 Medium
Attachment Units (MAUs)", Attachment Units (MAUs)",
RFC 4836, April 2007. RFC 4836, April 2007.
[RFC5066] Beili, E., "Ethernet in the First [RFC5066] Beili, E., "Ethernet in the First
Mile Copper (EFMCu) Interfaces Mile Copper (EFMCu) Interfaces
MIB", RFC 5066, November 2007. MIB", RFC 5066, November 2007.
[RFC5591] Harrington, D. and W. Hardaker,
"Transport Security Model for the
Simple Network Management Protocol
(SNMP)", RFC 5591, June 2009.
[RFC5592] Harrington, D., Salowey, J., and
W. Hardaker, "Secure Shell
Transport Model for the Simple
Network Management Protocol
(SNMP)", RFC 5592, June 2009.
[RFC5650] Morgenstern, M., Baillie, S., and [RFC5650] Morgenstern, M., Baillie, S., and
U. Bonollo, "Definitions of U. Bonollo, "Definitions of
Managed Objects for Very High Managed Objects for Very High
Speed Digital Subscriber Line 2 Speed Digital Subscriber Line 2
(VDSL2)", RFC 5650, (VDSL2)", RFC 5650,
September 2009. September 2009.
[RFC6353] Hardaker, W., "Transport Layer
Security (TLS) Transport Model for
the Simple Network Management
Protocol (SNMP)", RFC 6353,
July 2011.
[af-phy-0086] ATM Forum, "Inverse Multiplexing [af-phy-0086] ATM Forum, "Inverse Multiplexing
for ATM (IMA) Specification for ATM (IMA) Specification
Version 1.1", ATM Forum Version 1.1", ATM Forum
specification af-pfy-0086.001, specification af-pfy-0086.001,
March 1999. March 1999.
URIs URIs
[1] <http://www.iana.org/> [1] <http://www.iana.org/>
 End of changes. 307 change blocks. 
760 lines changed or deleted 827 lines changed or added

This html diff was produced by rfcdiff 1.41. The latest version is available from http://tools.ietf.org/tools/rfcdiff/