draft-ietf-adslmib-gbond-mib-08.txt   draft-ietf-adslmib-gbond-mib-09.txt 
Network Working Group E. Beili Network Working Group E. Beili
Internet-Draft Actelis Networks Internet-Draft Actelis Networks
Intended status: Standards Track M. Morgenstern Intended status: Standards Track M. Morgenstern
Expires: August 4, 2012 ECI Telecom Expires: August 16, 2012 ECI Telecom
Feb 01, 2012 Feb 13, 2012
xDSL multi-pair bonding (G.Bond) MIB xDSL multi-pair bonding (G.Bond) MIB
draft-ietf-adslmib-gbond-mib-08.txt draft-ietf-adslmib-gbond-mib-09.txt
Abstract Abstract
This document defines Management Information Base (MIB) module for This document defines Management Information Base (MIB) module for
use with network management protocols in TCP/IP-based internets. use with network management protocols in TCP/IP-based internets.
This document proposes an extension to the Interfaces Group MIB with This document proposes an extension to the Interfaces Group MIB with
a set of common objects for managing multi-pair bonded Digital a set of common objects for managing multi-pair bonded Digital
Subscriber Line (xDSL) interfaces, defined in ITU-T recommendations Subscriber Line (xDSL) interfaces, defined in ITU-T recommendations
G.998.1, G.998.2 and G.998.3. The MIB modules specific to each G.998.1, G.998.2 and G.998.3. The MIB modules specific to each
bonding technology are defined in GBOND-ATM-MIB, GBOND-ETH-MIB and bonding technology are defined in GBOND-ATM-MIB, GBOND-ETH-MIB and
skipping to change at page 1, line 38 skipping to change at page 1, line 38
Internet-Drafts are working documents of the Internet Engineering Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet- working documents as Internet-Drafts. The list of current Internet-
Drafts is at http://datatracker.ietf.org/drafts/current/. Drafts is at http://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress." material or to cite them other than as "work in progress."
This Internet-Draft will expire on August 4, 2012. This Internet-Draft will expire on August 16, 2012.
Copyright Notice Copyright Notice
Copyright (c) 2012 IETF Trust and the persons identified as the Copyright (c) 2012 IETF Trust and the persons identified as the
document authors. All rights reserved. document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info) in effect on the date of (http://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents publication of this document. Please review these documents
skipping to change at page 2, line 22 skipping to change at page 2, line 22
2. The Internet-Standard Management Framework . . . . . . . . . . 4 2. The Internet-Standard Management Framework . . . . . . . . . . 4
3. The DSL Forum Management Framework for xDSL Bonding . . . . . 4 3. The DSL Forum Management Framework for xDSL Bonding . . . . . 4
4. Relationship to Other MIB modules . . . . . . . . . . . . . . 4 4. Relationship to Other MIB modules . . . . . . . . . . . . . . 4
4.1. Relationship to Interfaces Group MIB module . . . . . . . 5 4.1. Relationship to Interfaces Group MIB module . . . . . . . 5
4.1.1. Layering Model . . . . . . . . . . . . . . . . . . . . 5 4.1.1. Layering Model . . . . . . . . . . . . . . . . . . . . 5
4.1.2. xDSL Bonding . . . . . . . . . . . . . . . . . . . . . 7 4.1.2. xDSL Bonding . . . . . . . . . . . . . . . . . . . . . 7
4.1.3. Discovery Operation . . . . . . . . . . . . . . . . . 7 4.1.3. Discovery Operation . . . . . . . . . . . . . . . . . 7
4.1.4. G.Bond ports initialization . . . . . . . . . . . . . 9 4.1.4. G.Bond ports initialization . . . . . . . . . . . . . 9
4.1.5. Usage of ifTable . . . . . . . . . . . . . . . . . . . 10 4.1.5. Usage of ifTable . . . . . . . . . . . . . . . . . . . 10
4.2. Relationship to G.Bond ATM, ETH and TDIM MIB modules . . . 11 4.2. Relationship to G.Bond ATM, ETH and TDIM MIB modules . . . 11
4.3. Relationship to xDSL MIB modules . . . . . . . . . . . . . 11 4.3. Relationship to xDSL MIB modules . . . . . . . . . . . . . 12
5. MIB Structure . . . . . . . . . . . . . . . . . . . . . . . . 12 5. MIB Structure . . . . . . . . . . . . . . . . . . . . . . . . 12
5.1. Overview . . . . . . . . . . . . . . . . . . . . . . . . . 12 5.1. Overview . . . . . . . . . . . . . . . . . . . . . . . . . 12
5.2. Performance Monitoring . . . . . . . . . . . . . . . . . . 12 5.2. Performance Monitoring . . . . . . . . . . . . . . . . . . 12
5.3. Mapping of DSL Forum TR-159 Managed Objects . . . . . . . 12 5.3. Mapping of DSL Forum TR-159 Managed Objects . . . . . . . 13
6. xDSL Multi-pair Bonding MIB Definitions . . . . . . . . . . . 17 6. xDSL Multi-pair Bonding MIB Definitions . . . . . . . . . . . 17
7. Security Considerations . . . . . . . . . . . . . . . . . . . 60 7. Security Considerations . . . . . . . . . . . . . . . . . . . 62
8. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 62 8. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 63
9. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . 62 9. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . 63
10. References . . . . . . . . . . . . . . . . . . . . . . . . . . 62 10. References . . . . . . . . . . . . . . . . . . . . . . . . . . 64
10.1. Normative References . . . . . . . . . . . . . . . . . . . 62 10.1. Normative References . . . . . . . . . . . . . . . . . . . 64
10.2. Informative References . . . . . . . . . . . . . . . . . . 63 10.2. Informative References . . . . . . . . . . . . . . . . . . 65
1. Introduction 1. Introduction
The xDSL Multi-Pair Bonding, allows a service provider to provide The xDSL Multi-Pair Bonding, allows a service provider to provide
high bandwidth services to business and residential customers over high bandwidth services to business and residential customers over
multiple xDSL lines, with greater speed and resiliency, than the multiple xDSL lines, with greater speed and resiliency, than the
service over a single xDSL line, bridging the gap between xDSL and service over a single xDSL line, bridging the gap between xDSL and
fiber-based transport. fiber-based transport.
There are three xDSL Multi-Pair Bonding schemes, also known under There are three xDSL Multi-Pair Bonding schemes, also known under
skipping to change at page 3, line 31 skipping to change at page 3, line 31
evolution of the legacy Inverse Multiplexing over ATM (IMA) evolution of the legacy Inverse Multiplexing over ATM (IMA)
technology [af-phy-0086], applied to xDSL with variable rates on technology [af-phy-0086], applied to xDSL with variable rates on
each line/bearer channel. each line/bearer channel.
o The Ethernet-Based Multi-Pair Bonding, specified in ITU-T G.998.2 o The Ethernet-Based Multi-Pair Bonding, specified in ITU-T G.998.2
recommendation [G.998.2], which defines a method for bonding (or recommendation [G.998.2], which defines a method for bonding (or
aggregating) of multiple xDSL lines (or individual bearer channels aggregating) of multiple xDSL lines (or individual bearer channels
in multiple xDSL lines) into a single bi-directional logical link in multiple xDSL lines) into a single bi-directional logical link
carrying an Ethernet stream. This specification can be viewed as carrying an Ethernet stream. This specification can be viewed as
IEEE 802.3-2005 [802.3] Clause 61 Physical Medium Entity (PME) IEEE 802.3-2005 [802.3] Clause 61 Physical Medium Entity (PME)
Aggregation, generalized to work over any xDSL technology. Aggregation, generalized to work over any xDSL technology
(2Base-TL and 10Pass-TS interfaces defined by IEEE use G.SHDSL and (2Base-TL and 10Pass-TS interfaces defined by IEEE use G.SHDSL and
VDSL technology respectively). VDSL technology respectively).
o The Multi-pair bonding using time-division inverse multiplexing o The Multi-pair bonding using time-division inverse multiplexing
(TDIM), specified in ITU-T G.998.3 recommendation [G.998.3], which (TDIM), specified in ITU-T G.998.3 recommendation [G.998.3], which
defines a method for bonding (or aggregating) of multiple xDSL defines a method for bonding (or aggregating) of multiple xDSL
lines into a single bi-directional logical link carrying a mix of lines into a single bi-directional logical link carrying a mix of
various traffic streams (e.g., Ethernet, ATM, TDM). various traffic streams (e.g., Ethernet, ATM, TDM).
Architecturally all three bonding schemes define a new "bonded" Architecturally all three bonding schemes define a new "bonded"
skipping to change at page 7, line 23 skipping to change at page 7, line 23
connected to run on top of a particular interface. connected to run on top of a particular interface.
4.1.2. xDSL Bonding 4.1.2. xDSL Bonding
The G.998.x Bonding allows a number of BCEs to be aggregated onto a The G.998.x Bonding allows a number of BCEs to be aggregated onto a
single logical GBS port, by splitting the incoming traffic into single logical GBS port, by splitting the incoming traffic into
multiple streams, transmitting each stream over a specific BCE and multiple streams, transmitting each stream over a specific BCE and
combining the streams at the remote GBS port, preserving the original combining the streams at the remote GBS port, preserving the original
traffic order. traffic order.
Big Ethernet frames MAY be fragmented before the transmission and The Ethernet frames MAY be fragmented before the transmission and
reassembled at the remote end to minimize transportation delay. reassembled at the remote end to minimize transportation delay.
The Bonding is OPTIONAL, meaning that a device with a single BCE MAY The Bonding is OPTIONAL, meaning that a device with a single BCE MAY
perform fragmentation and re-assembly if this function is supported perform fragmentation and re-assembly if this function is supported
by the device. The agent is REQUIRED to indicate the Bonding by the device. The agent is REQUIRED to indicate the Bonding
capability for all types of G.Bond ports (ATM, Ethernet and TDIM). capability for all types of G.Bond ports (ATM, Ethernet and TDIM).
The GBOND-MIB module allows a Network Management application to query The GBOND-MIB module allows a Network Management application to query
Bonding capability and enable/disable it if supported. Note that Bonding capability and enable/disable it if supported. Note that
enabling Bonding effectively turns on fragmentation and re-assembly, enabling Bonding effectively turns on fragmentation and re-assembly
even on a single-BCE port. function, even on a single-BCE port.
4.1.3. Discovery Operation 4.1.3. Discovery Operation
The G.Bond ports may optionally support discovery operation, whereby The G.Bond ports may optionally support discovery operation, whereby
BCEs, during initialization, exchange information about their BCEs, during initialization, exchange information about their
respective aggregation groups (GBS), via [G.994.1] handshake (G.hs) respective aggregation groups (GBS), via [G.994.1] handshake (G.hs)
protocol. This information can then be used to detect copper protocol. This information can then be used to detect copper
misconnections or for an automatic assignment of the local BCEs into misconnections or for an automatic assignment of the local BCEs into
aggregation groups instead of a fixed pre-configuration. aggregation groups instead of a fixed pre-configuration.
skipping to change at page 10, line 15 skipping to change at page 10, line 15
During this initialization both ends of a link (peers) work During this initialization both ends of a link (peers) work
cooperatively to achieve required data rate on a particular copper cooperatively to achieve required data rate on a particular copper
pair. Sometimes, when the copper line is too long or the noise on pair. Sometimes, when the copper line is too long or the noise on
the line is too high, that 'training' process may fail to achieve a the line is too high, that 'training' process may fail to achieve a
specific target rate with required characteristics. specific target rate with required characteristics.
The ifAdminStatus object from the IF-MIB, controls the desired state The ifAdminStatus object from the IF-MIB, controls the desired state
of a GBS with all the BCEs connected to it or of an individual BCE of a GBS with all the BCEs connected to it or of an individual BCE
port. Setting this object to 'up' instructs a particular GBS or a port. Setting this object to 'up' instructs a particular GBS or a
BCE to start initialization process, which may take tens of seconds BCE to start initialization process, which may take tens of seconds
for G.Bond ports. The ifOperStatus object shows the operational for G.Bond ports. The ifOperStatus object from the IF-MIB shows the
state of an interface (extended by ifMauMediaAvailable object from operational state of an interface for GBS, extended by
MAU-MIB [RFC4836] for GBS and *Status object from a relevant line MIB gBondPortStatFltStatus object defined in this document, and
for BCE interfaces). corresponding *Status object from a relevant xDSL line MIB for BCE
interfaces.
A disconnected BCE may be initialized by changing the ifAdminState A disconnected BCE may be initialized by changing the ifAdminState
from 'down' to 'up'. Changing the ifAdminState to 'up' on the GBS from 'down' to 'up'. Changing the ifAdminState to 'up' on the GBS
initializes all BCEs connected to that particular GBS. Note that in initializes all BCEs connected to that particular GBS. Note that in
case of bonding some interfaces may fail to initialize while others case of bonding some interfaces may fail to initialize while others
succeed. The GBS is considered operationally 'up' if at least one succeed. The GBS is considered operationally 'up' if at least one
bonded BCE is operationally 'up'. When all BCEs connected to the GBS bonded BCE is operationally 'up'. When all BCEs connected to the GBS
are 'down' the GBS SHALL be considered operationally are 'down' the GBS SHALL be considered operationally
'lowerLayerDown'. The GBS SHALL be considered operationally 'lowerLayerDown'. The GBS SHALL be considered operationally
'notPresent' if it is not connected to any BCE. The GBS/BCE 'notPresent' if it is not connected to any BCE. The GBS/BCE
interface SHALL remain operationally 'down' during initialization. interface SHALL remain operationally 'down' during initialization,
indicated by 'init' value of the gBondPortStatFltStatus object.
4.1.5. Usage of ifTable 4.1.5. Usage of ifTable
Both BCE and GBS interfaces are managed using interface specific Both BCE and GBS interfaces are managed using interface specific
management objects defined in the GBOND-MIB module and generic management objects defined in the GBOND-MIB module and generic
interface objects from the ifTable of IF-MIB, with all management interface objects from the ifTable of IF-MIB, with all management
table entries referenced by the interface index ifIndex. table entries referenced by the interface index ifIndex.
The following table summarizes G.Bond specific interpretations for The following table summarizes G.Bond specific interpretations for
some of the ifTable objects specified by the mandatory some of the ifTable objects specified by the mandatory
skipping to change at page 11, line 4 skipping to change at page 11, line 16
| IF-MIB object | G.Bond interpretation | | IF-MIB object | G.Bond interpretation |
+---------------+---------------------------------------------------+ +---------------+---------------------------------------------------+
| ifIndex | Interface index. Note that each BCE and each GBS | | ifIndex | Interface index. Note that each BCE and each GBS |
| | in the G.Bond PHY MUST have a unique index, as | | | in the G.Bond PHY MUST have a unique index, as |
| | there are some GBS and BCE specific attributes | | | there are some GBS and BCE specific attributes |
| | accessible only on the GBS or BCE level. | | | accessible only on the GBS or BCE level. |
+---------------+---------------------------------------------------+ +---------------+---------------------------------------------------+
| ifType | g9981(263), g9982(264) or g9983(265) for the ATM, | | ifType | g9981(263), g9982(264) or g9983(265) for the ATM, |
| | Ethernet or TDIM GBS respectively, shdsl(169) for | | | Ethernet or TDIM GBS respectively, shdsl(169) for |
| | G.SHDSL BCE, vdsl(97) for VDSL BCE, etc. | | | G.SHDSL BCE, vdsl(97) for VDSL BCE, etc. |
+---------------+---------------------------------------------------+
| ifSpeed | Operating data rate for the BCE. For the GBS it | | ifSpeed | Operating data rate for the BCE. For the GBS it |
| | is the sum of the current operating data rates of | | | is the sum of the current operating data rates of |
| | all BCEs in the aggregation group, without the | | | all BCEs in the aggregation group, without the |
| | encapsulation overhead and G.Bond overhead, but | | | encapsulation overhead and G.Bond overhead, but |
| | accounting for the Inter-Frame Gaps (IFG). When a | | | accounting for the Inter-Frame Gaps (IFG). When a |
| | GBS or a BCE is operating in an asymetrical | | | GBS or a BCE is operating in an asymetrical |
| | fashion (upstream data rate differs from the | | | fashion (upstream data rate differs from the |
| | downstream one) the lowest of the values is | | | downstream one) the lowest of the values is |
| | shown. | | | shown. |
+---------------+---------------------------------------------------+ +---------------+---------------------------------------------------+
skipping to change at page 12, line 37 skipping to change at page 12, line 50
The OPTIONAL performance monitoring counters, thresholds and history The OPTIONAL performance monitoring counters, thresholds and history
buckets (interval-counters) defined in [TR-159] are implemented using buckets (interval-counters) defined in [TR-159] are implemented using
the textual conventions defined in the HC-PerfHist-TC-MIB [RFC3705]. the textual conventions defined in the HC-PerfHist-TC-MIB [RFC3705].
The HC-PerfHist-TC-MIB defines 64-bit versions of the textual The HC-PerfHist-TC-MIB defines 64-bit versions of the textual
conventions found in PerfHist-TC-MIB [RFC3593]. conventions found in PerfHist-TC-MIB [RFC3593].
The agent SHOULD align the beginning of each interval to a fifteen The agent SHOULD align the beginning of each interval to a fifteen
minute boundary of a wall clock. Likewise, the beginning of each one minute boundary of a wall clock. Likewise, the beginning of each one
day intervals SHOULD be aligned with the start of a day. day intervals SHOULD be aligned with the start of a day.
The rationale behind it is to simplify collection and analysis of the
PM from multiple agents by a network management system (NMS) - each
PM interval can be "time-stamped" using the gBond*IntervalIndex
object, the fact that 1-day interval starts at 00:00 and 15-min
intervals are aligned with 1/4 hour and the network-wide "wall
clock", typically distributed via NTP or SNTP. If the agent does not
have an access to the wall clock, a local clock can be used. In this
case, as well as when coping with multiple time zones, the NMS would
have to correlate for the difference between the agent's local clock
(available for example via hrSystemDate object from HOST-RESOURCES-
MIB [RFC2790]) and the wall clock.
Counters are not reset when a GBS is reinitialized, but rather only Counters are not reset when a GBS is reinitialized, but rather only
when the agent is reset or reinitialized. when the agent is reset or reinitialized.
Note that the accumulation of certain performance events for a Note that the accumulation of certain performance events for a
monitored entity is inhibited (counting stops) during periods of monitored entity is inhibited (counting stops) during periods of
service unavailability on that monitored entity. The DESCRIPTION service unavailability on that monitored entity. The DESCRIPTION
clause of performance monitoring counters in this MIB module clause of performance monitoring counters in this MIB module
specifies which of the counters are inhibited during periods of specifies which of the counters are inhibited during periods of
service unavailability. service unavailability.
skipping to change at page 13, line 28 skipping to change at page 14, line 4
| aGroupAdminBondScheme | gBondPortConfAdminScheme | | aGroupAdminBondScheme | gBondPortConfAdminScheme |
+-------------------------------+-----------------------------------+ +-------------------------------+-----------------------------------+
| aGroupPeerAdminBondScheme | gBondPortConfPeerAdminScheme | | aGroupPeerAdminBondScheme | gBondPortConfPeerAdminScheme |
+-------------------------------+-----------------------------------+ +-------------------------------+-----------------------------------+
| aGroupOperBondScheme | gBondPortStatOperScheme | | aGroupOperBondScheme | gBondPortStatOperScheme |
+-------------------------------+-----------------------------------+ +-------------------------------+-----------------------------------+
| aGroupPeerOperBondScheme | gBondPortStatPeerOperScheme | | aGroupPeerOperBondScheme | gBondPortStatPeerOperScheme |
+-------------------------------+-----------------------------------+ +-------------------------------+-----------------------------------+
| aGroupEnd | gBondPortStatSide | | aGroupEnd | gBondPortStatSide |
+-------------------------------+-----------------------------------+ +-------------------------------+-----------------------------------+
+-------------------------------+-----------------------------------+
| aGroupOperState | ifOperStatus (IF-MIB) | | aGroupOperState | ifOperStatus (IF-MIB) |
+-------------------------------+-----------------------------------+ +-------------------------------+-----------------------------------+
| aGroupAdminState | ifAdminStatus (IF-MIB) | | aGroupAdminState | ifAdminStatus (IF-MIB) |
+-------------------------------+-----------------------------------+ +-------------------------------+-----------------------------------+
| aGroupStatus | gBondPortStatFltStatus | | aGroupStatus | gBondPortStatFltStatus |
+-------------------------------+-----------------------------------+ +-------------------------------+-----------------------------------+
| aGroupCapacity | gBondPortCapCapacity | | aGroupCapacity | gBondPortCapCapacity |
+-------------------------------+-----------------------------------+ +-------------------------------+-----------------------------------+
| aGroupPeerCapacity | gBondPortCapPeerCapacity | | aGroupPeerCapacity | gBondPortCapPeerCapacity |
+-------------------------------+-----------------------------------+ +-------------------------------+-----------------------------------+
skipping to change at page 14, line 4 skipping to change at page 14, line 30
+-------------------------------+-----------------------------------+ +-------------------------------+-----------------------------------+
| aGroupUpRate | gBondPortStatUpDataRate | | aGroupUpRate | gBondPortStatUpDataRate |
+-------------------------------+-----------------------------------+ +-------------------------------+-----------------------------------+
| aGroupDownRate | gBondPortStatDnDataRate | | aGroupDownRate | gBondPortStatDnDataRate |
+-------------------------------+-----------------------------------+ +-------------------------------+-----------------------------------+
| aGroupTargetUpRate | gBondPortConfTargetUpDataRate | | aGroupTargetUpRate | gBondPortConfTargetUpDataRate |
+-------------------------------+-----------------------------------+ +-------------------------------+-----------------------------------+
| aGroupTargetDownRate | gBondPortConfTargetDnDataRate | | aGroupTargetDownRate | gBondPortConfTargetDnDataRate |
+-------------------------------+-----------------------------------+ +-------------------------------+-----------------------------------+
| aGroupThreshLowUpRate | gBondPortConfThreshLowUpRate | | aGroupThreshLowUpRate | gBondPortConfThreshLowUpRate |
+-------------------------------+-----------------------------------+
| aGroupThreshLowDownRate | gBondPortConfThreshLowDnRate | | aGroupThreshLowDownRate | gBondPortConfThreshLowDnRate |
+-------------------------------+-----------------------------------+ +-------------------------------+-----------------------------------+
| aGroupLowRateCrossingEnable | gBondPortConfLowRateCrossingEnabl | | aGroupLowRateCrossingEnable | gBondPortConfLowRateCrossingEnabl |
| | e | | | e |
+-------------------------------+-----------------------------------+ +-------------------------------+-----------------------------------+
| nGroupLowUpRateCrossing | gBondLowUpRateCrossing | | nGroupLowUpRateCrossing | gBondLowUpRateCrossing |
+-------------------------------+-----------------------------------+ +-------------------------------+-----------------------------------+
| nGroupLowDownRateCrossing | gBondLowDnRateCrossing | | nGroupLowDownRateCrossing | gBondLowDnRateCrossing |
+-------------------------------+-----------------------------------+ +-------------------------------+-----------------------------------+
| aGroupLinkUpDownEnable | The linkUp/linkDown notifications | | aGroupLinkUpDownEnable | ifLinkUpDownTrapEnable (IF-MIB) |
| | of IF-MIB can be controlled using |
| | the mechanisms defined in RFC |
| | 3413 [RFC3413]. |
+-------------------------------+-----------------------------------+ +-------------------------------+-----------------------------------+
| nGroupLinkUp | linkDown (IF-MIB) | | nGroupLinkUp | linkDown (IF-MIB) |
+-------------------------------+-----------------------------------+ +-------------------------------+-----------------------------------+
| nGroupLinkDown | linkUp (IF-MIB) | | nGroupLinkDown | linkUp (IF-MIB) |
+-------------------------------+-----------------------------------+ +-------------------------------+-----------------------------------+
| oBondingGroup - PM Package | | | oBondingGroup - PM Package | |
| (Optional) | | | (Optional) | |
+-------------------------------+-----------------------------------+ +-------------------------------+-----------------------------------+
| aGroupPerfES | gBondPortPmCurES | | aGroupPerfES | gBondPortPmCurES |
+-------------------------------+-----------------------------------+ +-------------------------------+-----------------------------------+
| aGroupPerfSES | gBondPortPmCurSES | | aGroupPerfSES | gBondPortPmCurSES |
+-------------------------------+-----------------------------------+
| aGroupPerfUAS | gBondPortPmCurUAS | | aGroupPerfUAS | gBondPortPmCurUAS |
+-------------------------------+-----------------------------------+ +-------------------------------+-----------------------------------+
| aGroupPerf15MinValidIntervals | gBondPortPmCur15MinValidIntervals | | aGroupPerf15MinValidIntervals | gBondPortPmCur15MinValidIntervals |
+-------------------------------+-----------------------------------+ +-------------------------------+-----------------------------------+
| aGroupPerf15MinInvalidInterva | gBondPortPmCur15MinInvalidInterva | | aGroupPerf15MinInvalidInterva | gBondPortPmCur15MinInvalidInterva |
| ls | ls | | ls | ls |
+-------------------------------+-----------------------------------+ +-------------------------------+-----------------------------------+
| aGroupPerfCurr15MinTimeElapse | gBondPortPmCur15MinTimeElapsed | | aGroupPerfCurr15MinTimeElapse | gBondPortPmCur15MinTimeElapsed |
| d | | | d | |
+-------------------------------+-----------------------------------+ +-------------------------------+-----------------------------------+
skipping to change at page 15, line 4 skipping to change at page 15, line 27
+-------------------------------+-----------------------------------+ +-------------------------------+-----------------------------------+
| aGroupPerfCurr15MinUAS | gBondPortPmCur15MinUAS | | aGroupPerfCurr15MinUAS | gBondPortPmCur15MinUAS |
+-------------------------------+-----------------------------------+ +-------------------------------+-----------------------------------+
| aGroupPerfTcaEnable | gBondPortConfPmTcaEnable | | aGroupPerfTcaEnable | gBondPortConfPmTcaEnable |
+-------------------------------+-----------------------------------+ +-------------------------------+-----------------------------------+
| aGroupPerfThreshold15MinES | gBondPortPmTcaProfileThresh15MinE | | aGroupPerfThreshold15MinES | gBondPortPmTcaProfileThresh15MinE |
| | S | | | S |
+-------------------------------+-----------------------------------+ +-------------------------------+-----------------------------------+
| aGroupPerfThreshold15MinSES | gBondPortPmTcaProfileThresh15MinS | | aGroupPerfThreshold15MinSES | gBondPortPmTcaProfileThresh15MinS |
| | ES | | | ES |
+-------------------------------+-----------------------------------+
| aGroupPerfThreshold15MinUAS | gBondPortPmTcaProfileThresh15MinU | | aGroupPerfThreshold15MinUAS | gBondPortPmTcaProfileThresh15MinU |
| | AS | | | AS |
+-------------------------------+-----------------------------------+ +-------------------------------+-----------------------------------+
| nGroupPerfTca15MinES | gBondPmTca15MinESCrossing | | nGroupPerfTca15MinES | gBondPmTca15MinESCrossing |
+-------------------------------+-----------------------------------+ +-------------------------------+-----------------------------------+
| nGroupPerfTca15MinSES | gBondPmTca15MinSESCrossing | | nGroupPerfTca15MinSES | gBondPmTca15MinSESCrossing |
+-------------------------------+-----------------------------------+ +-------------------------------+-----------------------------------+
| nGroupPerfTca15MinUAS | gBondPmTca15MinUASCrossing | | nGroupPerfTca15MinUAS | gBondPmTca15MinUASCrossing |
+-------------------------------+-----------------------------------+ +-------------------------------+-----------------------------------+
| aGroupPerf1DayValidIntervals | gBondPortPmCur1DayValidIntervals | | aGroupPerf1DayValidIntervals | gBondPortPmCur1DayValidIntervals |
skipping to change at page 15, line 28 skipping to change at page 16, line 4
| aGroupPerfCurr1DayTimeElapsed | gBondPortPmCur1DayTimeElapsed | | aGroupPerfCurr1DayTimeElapsed | gBondPortPmCur1DayTimeElapsed |
+-------------------------------+-----------------------------------+ +-------------------------------+-----------------------------------+
| aGroupPerfCurr1DayES | gBondPortPmCur1DayIntervalES | | aGroupPerfCurr1DayES | gBondPortPmCur1DayIntervalES |
+-------------------------------+-----------------------------------+ +-------------------------------+-----------------------------------+
| aGroupPerfCurr1DaySES | gBondPortPmCur1DayIntervalSES | | aGroupPerfCurr1DaySES | gBondPortPmCur1DayIntervalSES |
+-------------------------------+-----------------------------------+ +-------------------------------+-----------------------------------+
| aGroupPerfCurr1DayUAS | gBondPortPmCur1DayIntervalUAS | | aGroupPerfCurr1DayUAS | gBondPortPmCur1DayIntervalUAS |
+-------------------------------+-----------------------------------+ +-------------------------------+-----------------------------------+
| aGroupPerfThreshold1DayES | gBondPortPmTcaProfileThresh1DayES | | aGroupPerfThreshold1DayES | gBondPortPmTcaProfileThresh1DayES |
+-------------------------------+-----------------------------------+ +-------------------------------+-----------------------------------+
+-------------------------------+-----------------------------------+
| aGroupPerfThreshold1DaySES | gBondPortPmTcaProfileThresh1DaySE | | aGroupPerfThreshold1DaySES | gBondPortPmTcaProfileThresh1DaySE |
| | S | | | S |
+-------------------------------+-----------------------------------+ +-------------------------------+-----------------------------------+
| aGroupPerfThreshold1DayUAS | gBondPortPmTcaProfileThresh1DayUA | | aGroupPerfThreshold1DayUAS | gBondPortPmTcaProfileThresh1DayUA |
| | S | | | S |
+-------------------------------+-----------------------------------+ +-------------------------------+-----------------------------------+
| nGroupPerfTca1DayES | gBondPmTca1DayESCrossing | | nGroupPerfTca1DayES | gBondPmTca1DayESCrossing |
+-------------------------------+-----------------------------------+ +-------------------------------+-----------------------------------+
| nGroupPerfTca1DaySES | gBondPmTca1DaySESCrossing | | nGroupPerfTca1DaySES | gBondPmTca1DaySESCrossing |
+-------------------------------+-----------------------------------+ +-------------------------------+-----------------------------------+
skipping to change at page 16, line 4 skipping to change at page 16, line 29
| aGroupPerf15MinIntervalValid | gBondPortPm15MinIntervalValid | | aGroupPerf15MinIntervalValid | gBondPortPm15MinIntervalValid |
+-------------------------------+-----------------------------------+ +-------------------------------+-----------------------------------+
| aGroupPerf15MinIntervalES | gBondPortPm15MinIntervalES | | aGroupPerf15MinIntervalES | gBondPortPm15MinIntervalES |
+-------------------------------+-----------------------------------+ +-------------------------------+-----------------------------------+
| aGroupPerf15MinIntervalSES | gBondPortPm15MinIntervalSES | | aGroupPerf15MinIntervalSES | gBondPortPm15MinIntervalSES |
+-------------------------------+-----------------------------------+ +-------------------------------+-----------------------------------+
| aGroupPerf15MinIntervalUAS | gBondPortPm15MinIntervalUAS | | aGroupPerf15MinIntervalUAS | gBondPortPm15MinIntervalUAS |
+-------------------------------+-----------------------------------+ +-------------------------------+-----------------------------------+
| aGroupPerf1DayIntervalNumber | gBondPortPm1DayIntervalIndex | | aGroupPerf1DayIntervalNumber | gBondPortPm1DayIntervalIndex |
+-------------------------------+-----------------------------------+ +-------------------------------+-----------------------------------+
+-------------------------------+-----------------------------------+
| aGroupPerf1DayIntervalValid | gBondPortPm1DayIntervalValid | | aGroupPerf1DayIntervalValid | gBondPortPm1DayIntervalValid |
+-------------------------------+-----------------------------------+ +-------------------------------+-----------------------------------+
| aGroupPerf1DayIntervalMoniSec | gBondPortPm1DayIntervalMoniTime | | aGroupPerf1DayIntervalMoniSec | gBondPortPm1DayIntervalMoniTime |
| s | | | s | |
+-------------------------------+-----------------------------------+ +-------------------------------+-----------------------------------+
| aGroupPerf1DayIntervalES | gBondPortPm1DayIntervalES | | aGroupPerf1DayIntervalES | gBondPortPm1DayIntervalES |
+-------------------------------+-----------------------------------+ +-------------------------------+-----------------------------------+
| aGroupPerf1DayIntervalSES | gBondPortPm1DayIntervalSES | | aGroupPerf1DayIntervalSES | gBondPortPm1DayIntervalSES |
+-------------------------------+-----------------------------------+ +-------------------------------+-----------------------------------+
| aGroupPerf1DayIntervalUAS | gBondPortPm1DayIntervalUAS | | aGroupPerf1DayIntervalUAS | gBondPortPm1DayIntervalUAS |
skipping to change at page 16, line 28 skipping to change at page 17, line 4
+-------------------------------+-----------------------------------+ +-------------------------------+-----------------------------------+
| aLineID | ifIndex (IF-MIB) | | aLineID | ifIndex (IF-MIB) |
+-------------------------------+-----------------------------------+ +-------------------------------+-----------------------------------+
| aLineType | ifType (IF-MIB) | | aLineType | ifType (IF-MIB) |
+-------------------------------+-----------------------------------+ +-------------------------------+-----------------------------------+
| aLineOperState | ifOperStatus (IF-MIB) | | aLineOperState | ifOperStatus (IF-MIB) |
+-------------------------------+-----------------------------------+ +-------------------------------+-----------------------------------+
| aLineStatus | *dsl*CurrStatus (*DSL-LINE-MIB) | | aLineStatus | *dsl*CurrStatus (*DSL-LINE-MIB) |
+-------------------------------+-----------------------------------+ +-------------------------------+-----------------------------------+
| aLineEnd | *dsl*Side (*DSL-LINE-MIB) | | aLineEnd | *dsl*Side (*DSL-LINE-MIB) |
+-------------------------------+-----------------------------------+
| aLineAdminState | ifAdminStatus (IF-MIB) | | aLineAdminState | ifAdminStatus (IF-MIB) |
+-------------------------------+-----------------------------------+ +-------------------------------+-----------------------------------+
| aLineRemoteDiscoveryCode | gBondBceConfRemoteDiscoveryCode | | aLineRemoteDiscoveryCode | gBondBceConfRemoteDiscoveryCode |
+-------------------------------+-----------------------------------+ +-------------------------------+-----------------------------------+
| aLineUpDownEnable | The linkUp/linkDown notifications | | aLineUpDownEnable | ifLinkUpDownTrapEnable (IF-MIB) |
| | of IF-MIB can be controlled using |
| | the mechanisms defined in RFC |
| | 3413. |
+-------------------------------+-----------------------------------+ +-------------------------------+-----------------------------------+
| nLineUp | linkUp (IF-MIB) | | nLineUp | linkUp (IF-MIB) |
+-------------------------------+-----------------------------------+ +-------------------------------+-----------------------------------+
| nLineDown | linkDown (IF-MIB) | | nLineDown | linkDown (IF-MIB) |
+-------------------------------+-----------------------------------+ +-------------------------------+-----------------------------------+
| oChannel - Basic Package | | | oChannel - Basic Package | |
| (Mandatory) | | | (Mandatory) | |
+-------------------------------+-----------------------------------+ +-------------------------------+-----------------------------------+
| aChannelID | ifIndex (IF-MIB) | | aChannelID | ifIndex (IF-MIB) |
+-------------------------------+-----------------------------------+ +-------------------------------+-----------------------------------+
| aChannelGroupID | | | aChannelGroupID | |
+-------------------------------+-----------------------------------+ +-------------------------------+-----------------------------------+
| aChannelType | ifType (IF-MIB) | | aChannelType | ifType (IF-MIB) |
+-------------------------------+-----------------------------------+ +-------------------------------+-----------------------------------+
| aChannelOperState | ifOperStatus (IF-MIB) | | aChannelOperState | ifOperStatus (IF-MIB) |
+-------------------------------+-----------------------------------+
| aChannelStatus | *dsl*CurrStatus (*DSL-LINE-MIB), | | aChannelStatus | *dsl*CurrStatus (*DSL-LINE-MIB), |
| | xdsl2ChStatus*Status | | | xdsl2ChStatus*Status |
| | (VDSL2-LINE-MIB) | | | (VDSL2-LINE-MIB) |
+-------------------------------+-----------------------------------+ +-------------------------------+-----------------------------------+
Table 2: Mapping of TR-159 Managed Objects Table 2: Mapping of TR-159 Managed Objects
6. xDSL Multi-pair Bonding MIB Definitions 6. xDSL Multi-pair Bonding MIB Definitions
GBOND-MIB DEFINITIONS ::= BEGIN GBOND-MIB DEFINITIONS ::= BEGIN
skipping to change at page 17, line 47 skipping to change at page 18, line 20
HCPerfIntervalCount, HCPerfIntervalCount,
HCPerfIntervalThreshold, HCPerfIntervalThreshold,
HCPerfValidIntervals, HCPerfValidIntervals,
HCPerfInvalidIntervals, HCPerfInvalidIntervals,
HCPerfTimeElapsed, HCPerfTimeElapsed,
HCPerfTotalCount HCPerfTotalCount
FROM HC-PerfHist-TC-MIB -- [RFC3705] FROM HC-PerfHist-TC-MIB -- [RFC3705]
; ;
------------------------------------------------------------------------ ------------------------------------------------------------------------
gBondMIB MODULE-IDENTITY gBondMIB MODULE-IDENTITY
LAST-UPDATED "201202010000Z" -- Feb 01, 2012 LAST-UPDATED "201202130000Z" -- Feb 13, 2012
ORGANIZATION "IETF ADSL MIB Working Group" ORGANIZATION "IETF ADSL MIB Working Group"
CONTACT-INFO CONTACT-INFO
"WG charter: "WG charter:
http://www.ietf.org/html.charters/adslmib-charter.html http://www.ietf.org/html.charters/adslmib-charter.html
Mailing Lists: Mailing Lists:
General Discussion: adslmib@ietf.org General Discussion: adslmib@ietf.org
To Subscribe: adslmib-request@ietf.org To Subscribe: adslmib-request@ietf.org
In Body: subscribe your_email_address In Body: subscribe your_email_address
skipping to change at page 19, line 16 skipping to change at page 19, line 38
ITU-T Recommendation G.998.3: 'Multi-pair bonding using ITU-T Recommendation G.998.3: 'Multi-pair bonding using
time-division inverse multiplexing', January 2005. time-division inverse multiplexing', January 2005.
[TR-159] refers to: [TR-159] refers to:
Broadband Forum Technical Report: 'Management Framework for Broadband Forum Technical Report: 'Management Framework for
xDSL Bonding', December 2008. xDSL Bonding', December 2008.
Naming Conventions: Naming Conventions:
BCE - Bonding Channel Entity BCE - Bonding Channel Entity
BTU - Bonding Transmission Unit BTU - Bonding Transmission Unit
BTU-C - Bonding Transmission Unit, CO side
BTU-R - Bonding Transmission Unit, Remote Terminal (CPE) side
CO - Central Office CO - Central Office
CPE - Customer Premises Equipment CPE - Customer Premises Equipment
GBS - Generic Bonding Sublayer GBS - Generic Bonding Sublayer
PM - Performance Monitoring PM - Performance Monitoring
SNR - Signal to Noise Ratio SNR - Signal to Noise Ratio
TCA - Threshold Crossing Alert TCA - Threshold Crossing Alert
Copyright (C) The IETF Trust (2012). Copyright (C) The IETF Trust (2012).
This version of this MIB module is part of RFC XXXX; This version of this MIB module is part of RFC XXXX;
see the RFC itself for full legal notices." see the RFC itself for full legal notices."
REVISION "201202010000Z" -- Feb 01, 2012 REVISION "201202130000Z" -- Feb 13, 2012
DESCRIPTION "Initial version, published as RFC XXXX." DESCRIPTION "Initial version, published as RFC XXXX."
-- EdNote: Replace XXXX with the actual RFC number & -- EdNote: Replace XXXX with the actual RFC number &
-- remove this note -- remove this note
::= { mib-2 ZZZ } ::= { mib-2 ZZZ }
-- EdNote: Replace ZZZ with a real OID once it is -- EdNote: Replace ZZZ with a real OID once it is
-- allocated & remove this note. -- allocated & remove this note.
-- Sections of the module -- Sections of the module
-- Structured as recommended by [RFC4181], Appendix D -- Structured as recommended by [RFC4181], Appendix D
skipping to change at page 26, line 35 skipping to change at page 27, line 10
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A desired bonding scheme for a G.Bond GBS port. "A desired bonding scheme for a G.Bond GBS port.
The following values instruct the port to use corresponding The following values instruct the port to use corresponding
bonding scheme if supported: bonding scheme if supported:
g9981(1) - instructs the port to use G.998.1 bonding g9981(1) - instructs the port to use G.998.1 bonding
g9982(2) - instructs the port to use G.998.2 bonding g9982(2) - instructs the port to use G.998.2 bonding
g9983(3) - instructs the port to use G.998.3 bonding g9983(3) - instructs the port to use G.998.3 bonding
Changing of gBondPortConfAdminScheme MUST be performed when the Changing of gBondPortConfAdminScheme MUST be performed when the
link is Down. Attempts to change this object MUST be rejected link is administratively 'down', as indicated by the
(in case of SNMP with the error inconsistentValue), if the ifAdminStatus object in IF-MIB.
link is Up or Initializing. Attempts to change this object to Attempts to change this object MUST be rejected (in case of SNMP
an unsupported bonding scheme (see gBondPortCapSchemesSupported) with the error inconsistentValue), if the link is Up or
SHALL be rejected (in case of SNMP with the error wrongValue). Initializing. Attempts to change this object to an unsupported
bonding scheme (see gBondPortCapSchemesSupported) SHALL be
rejected (in case of SNMP with the error wrongValue).
This object maps to the TR-159 attribute This object maps to the TR-159 attribute aGroupAdminBondScheme."
aGroupAdminBondScheme."
REFERENCE REFERENCE
"[TR-159] 5.5.1.6" "[TR-159] 5.5.1.6; IF-MIB, ifAdminStatus"
::= { gBondPortConfEntry 1 } ::= { gBondPortConfEntry 1 }
gBondPortConfPeerAdminScheme OBJECT-TYPE gBondPortConfPeerAdminScheme OBJECT-TYPE
SYNTAX GBondScheme SYNTAX GBondScheme
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A desired bonding scheme for a peer (link partner) G.Bond "A desired bonding scheme for a peer (link partner) G.Bond
port (GBS). port (GBS).
The following values instruct the peer port to use The following values instruct the peer port to use
corresponding bonding scheme if supported: corresponding bonding scheme if supported:
g9981(1) - instructs the port to use G.998.1 bonding g9981(1) - instructs the port to use G.998.1 bonding
g9982(2) - instructs the port to use G.998.2 bonding g9982(2) - instructs the port to use G.998.2 bonding
g9983(3) - instructs the port to use G.998.3 bonding g9983(3) - instructs the port to use G.998.3 bonding
Changing of this object MUST be performed when the link is Down. Changing of this object MUST be performed when the link is
administratively 'down', as indicated by the ifAdminStatus
object in IF-MIB.
Attempts to change this object MUST be rejected (in case of SNMP Attempts to change this object MUST be rejected (in case of SNMP
with the error inconsistentValue), if the link is Up or with the error inconsistentValue), if the link is Up or
Initializing. Attempts to change this object to an unsupported Initializing. Attempts to change this object to an unsupported
bonding scheme (see gBondPortCapPeerSchemesSupported) SHALL be bonding scheme (see gBondPortCapPeerSchemesSupported) SHALL be
rejected (in case of SNMP with the error wrongValue). rejected (in case of SNMP with the error wrongValue).
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupPeerAdminBondScheme." aGroupPeerAdminBondScheme."
REFERENCE REFERENCE
"[TR-159] 5.5.1.7" "[TR-159] 5.5.1.7; IF-MIB, ifAdminStatus"
::= { gBondPortConfEntry 2 } ::= { gBondPortConfEntry 2 }
gBondPortConfDiscoveryCode OBJECT-TYPE gBondPortConfDiscoveryCode OBJECT-TYPE
SYNTAX PhysAddress (SIZE(6)) SYNTAX PhysAddress (SIZE(6))
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A Discovery Code of the G.Bond port (GBS). "A Discovery Code of the G.Bond port (GBS).
A unique 6 octet long code used by the Discovery function. A unique 6 octet long code used by the Discovery function.
This object MUST be instantiated for the -O subtype GBS before This object MUST be instantiated for the -O subtype GBS before
skipping to change at page 27, line 43 skipping to change at page 28, line 22
(Set_if_Clear and Clear_if_Same) are performed by BCEs (Set_if_Clear and Clear_if_Same) are performed by BCEs
associated with the GBS. associated with the GBS.
The initial value of this object for -R subtype ports after The initial value of this object for -R subtype ports after
reset is all zeroes. For -R subtype ports, the value of this reset is all zeroes. For -R subtype ports, the value of this
object cannot be changed directly. This value may be changed object cannot be changed directly. This value may be changed
as a result of writing operation on the as a result of writing operation on the
gBondBceConfRemoteDiscoveryCode object of remote BCE of -O gBondBceConfRemoteDiscoveryCode object of remote BCE of -O
subtype, connected to one of the local BCEs associated with subtype, connected to one of the local BCEs associated with
the GBS. the GBS.
Discovery MUST be performed when the link is Down. Discovery MUST be performed when the link is administratively
'down', as indicated by the ifAdminStatus object in IF-MIB.
Attempts to change this object MUST be rejected (in case of Attempts to change this object MUST be rejected (in case of
SNMP with the error inconsistentValue), if the link is Up or SNMP with the error inconsistentValue), if the link is Up or
Initializing. Initializing.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupDiscoveryCode." aGroupDiscoveryCode."
REFERENCE REFERENCE
"[TR-159] 5.5.1.20; [802.3] 61.2.2.8.3, 61.2.2.8.4, "[TR-159] 5.5.1.20; [802.3] 61.2.2.8.3, 61.2.2.8.4,
45.2.6.6.1, 45.2.6.8, 61A.2" 45.2.6.6.1, 45.2.6.8, 61A.2; IF-MIB, ifAdminStatus"
::= { gBondPortConfEntry 3 } ::= { gBondPortConfEntry 3 }
gBondPortConfTargetUpDataRate OBJECT-TYPE gBondPortConfTargetUpDataRate OBJECT-TYPE
SYNTAX Unsigned32(0|1..10000000) SYNTAX Unsigned32(0|1..10000000)
UNITS "Kbps" UNITS "Kbps"
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A desired G.Bond port Data Rate in the upstream direction, "A desired G.Bond port Data Rate in the upstream direction,
in Kbps, to be achieved during initialization, under in Kbps, to be achieved during initialization, under
skipping to change at page 28, line 47 skipping to change at page 29, line 27
achieve higher upstream data rate than that specified by this achieve higher upstream data rate than that specified by this
object, the excess capability SHALL be either converted to object, the excess capability SHALL be either converted to
additional SNR margin or reclaimed by minimizing transmit additional SNR margin or reclaimed by minimizing transmit
power. power.
The value of 0 means that the target data rate is not The value of 0 means that the target data rate is not
fixed and SHALL be set to the maximum attainable rate during fixed and SHALL be set to the maximum attainable rate during
initialization (Best Effort), under specified spectral initialization (Best Effort), under specified spectral
restrictions and with desired SNR Margin per BCE. restrictions and with desired SNR Margin per BCE.
This object is read-write for the -O subtype G.Bond ports This object is read-write for the -O subtype G.Bond ports.
and irrelevant for the -R subtypes. It is irrelevant for the -R subtypes - attempts to read or
change this object for such ports MUST be rejected (in case of
SNMP with the error inconsistentValue).
Changing of the Target Upstream Data Rate MUST be performed Changing of the Target Upstream Data Rate MUST be performed
when the link is Down. Attempts to change this object MUST be when the link is administratively 'down', as indicated by the
rejected (In case of SNMP with the error inconsistentValue), ifAdminStatus object in IF-MIB.
if the link is Up or Initializing. Attempts to change this object MUST be rejected (in case of SNMP
with the error inconsistentValue), if the link is Up or
Initializing.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute aGroupTargetUpRate."
aGroupTargetUpRate."
REFERENCE REFERENCE
"[TR-159] 5.5.1.17" "[TR-159] 5.5.1.17; IF-MIB, ifAdminStatus"
::= { gBondPortConfEntry 4 } ::= { gBondPortConfEntry 4 }
gBondPortConfTargetDnDataRate OBJECT-TYPE gBondPortConfTargetDnDataRate OBJECT-TYPE
SYNTAX Unsigned32(0|1..10000000) SYNTAX Unsigned32(0|1..10000000)
UNITS "Kbps" UNITS "Kbps"
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A desired G.Bond port Data Rate in the downstream direction, "A desired G.Bond port Data Rate in the downstream direction,
in Kbps, to be achieved during initialization, under in Kbps, to be achieved during initialization, under
skipping to change at page 30, line 5 skipping to change at page 30, line 36
achieve higher downstream data rate than that specified by achieve higher downstream data rate than that specified by
this object, the excess capability SHALL be either converted this object, the excess capability SHALL be either converted
to additional SNR margin or reclaimed by minimizing transmit to additional SNR margin or reclaimed by minimizing transmit
power. power.
The value of 0 means that the target data rate is not The value of 0 means that the target data rate is not
fixed and SHALL be set to the maximum attainable rate during fixed and SHALL be set to the maximum attainable rate during
initialization (Best Effort), under specified spectral initialization (Best Effort), under specified spectral
restrictions and with desired SNR Margin per BCE. restrictions and with desired SNR Margin per BCE.
This object is read-write for the -O subtype G.Bond ports This object is read-write for the -O subtype G.Bond ports.
and irrelevant for the -R subtypes. It is irrelevant for the -R subtypes - attempts to read or
change this object for such ports MUST be rejected (in case of
SNMP with the error inconsistentValue).
Changing of the Target Downstream Data Rate MUST be performed Changing of the Target Downstream Data Rate MUST be performed
when the link is Down. Attempts to change this object MUST be when the link is administratively 'down', as indicated by the
rejected (In case of SNMP with the error inconsistentValue), ifAdminStatus object in IF-MIB.
if the link is Up or Initializing. Attempts to change this object MUST be rejected (in case of SNMP
with the error inconsistentValue), if the link is Up or
Initializing.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute aGroupTargetDownRate."
aGroupTargetDownRate."
REFERENCE REFERENCE
"[TR-159] 5.5.1.18" "[TR-159] 5.5.1.18; IF-MIB, ifAdminStatus"
::= { gBondPortConfEntry 5 } ::= { gBondPortConfEntry 5 }
gBondPortConfThreshLowUpRate OBJECT-TYPE gBondPortConfThreshLowUpRate OBJECT-TYPE
SYNTAX Unsigned32(1..10000000) SYNTAX Unsigned32(1..10000000)
UNITS "Kbps" UNITS "Kbps"
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object configures the G.Bond port low upstream rate "This object configures the G.Bond port low upstream rate
crossing alarm threshold. When the current value of crossing alarm threshold. When the current value of
gBondPortStatUpDataRate for this port reaches/drops below or gBondPortStatUpDataRate for this port reaches/drops below or
exceeds this threshold, a gBondLowUpRateCrossing notification exceeds this threshold, a gBondLowUpRateCrossing notification
MAY be generated if enabled by MAY be generated if enabled by
gBondPortConfLowRateCrossingEnable. gBondPortConfLowRateCrossingEnable.
This object is read-write for the -O subtype G.Bond ports This object is read-write for the -O subtype G.Bond ports.
and irrelevant for the -R subtypes. It is irrelevant for the -R subtypes - attempts to read or
change this object for such ports MUST be rejected (in case of
SNMP with the error inconsistentValue).
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupthreshLowUpRate." aGroupthreshLowUpRate."
REFERENCE REFERENCE
"[TR-159] 5.5.1.21" "[TR-159] 5.5.1.21"
::= { gBondPortConfEntry 6 } ::= { gBondPortConfEntry 6 }
gBondPortConfThreshLowDnRate OBJECT-TYPE gBondPortConfThreshLowDnRate OBJECT-TYPE
SYNTAX Unsigned32(1..10000000) SYNTAX Unsigned32(1..10000000)
UNITS "Kbps" UNITS "Kbps"
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object configures the G.Bond port low downstream rate "This object configures the G.Bond port low downstream rate
crossing alarm threshold. When the current value of crossing alarm threshold. When the current value of
gBondPortStatDnDataRate for this port reaches/drops below or gBondPortStatDnDataRate for this port reaches/drops below or
exceeds this threshold, a gBondLowDnRateCrossing notification exceeds this threshold, a gBondLowDnRateCrossing notification
MAY be generated if enabled by MAY be generated if enabled by
gBondPortConfLowRateCrossingEnable. gBondPortConfLowRateCrossingEnable.
This object is read-write for the -O subtype G.Bond ports This object is read-write for the -O subtype G.Bond ports.
and irrelevant for the -R subtypes. It is irrelevant for the -R subtypes - attempts to read or
change this object for such ports MUST be rejected (in case of
SNMP with the error inconsistentValue).
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupThreshDownUpRate." aGroupThreshDownUpRate."
REFERENCE REFERENCE
"[TR-159] 5.5.1.22" "[TR-159] 5.5.1.22"
::= { gBondPortConfEntry 7 } ::= { gBondPortConfEntry 7 }
gBondPortConfLowRateCrossingEnable OBJECT-TYPE gBondPortConfLowRateCrossingEnable OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates whether gBondLowUpRateCrossing and "Indicates whether gBondLowUpRateCrossing and
gBondLowDnRateCrossing notifications should be generated gBondLowDnRateCrossing notifications should be generated
for this interface. for this interface.
Value of true(1) indicates that the notifications are enabled. Value of true(1) indicates that the notifications are enabled.
Value of false(2) indicates that the notifications are Value of false(2) indicates that the notifications are
disabled. disabled.
This object is read-write for the -O subtype G.Bond ports This object is read-write for the -O subtype G.Bond ports.
and irrelevant for the -R subtypes. It is irrelevant for the -R subtypes - attempts to read or
change this object for such ports MUST be rejected (in case of
SNMP with the error inconsistentValue).
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupLowRateCrossingEnable." aGroupLowRateCrossingEnable."
REFERENCE REFERENCE
"[TR-159] 5.5.1.23" "[TR-159] 5.5.1.23"
::= { gBondPortConfEntry 8 } ::= { gBondPortConfEntry 8 }
gBondPortConfPmTcaConfProfile OBJECT-TYPE gBondPortConfPmTcaConfProfile OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32)) SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS read-write MAX-ACCESS read-write
skipping to change at page 32, line 8 skipping to change at page 32, line 50
gBondPortConfPmTcaEnable OBJECT-TYPE gBondPortConfPmTcaEnable OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates whether gBondPerfTca*Crossing set of notifications "Indicates whether gBondPerfTca*Crossing set of notifications
should be generated for this interface. should be generated for this interface.
Value of true(1) indicates that the notifications are enabled. Value of true(1) indicates that the notifications are enabled.
Value of false(2) indicates that the notifications are Value of false(2) indicates that the notifications are disabled.
disabled.
This object maps to the TR-159 attribute aGroupPerfTcaEnable." This object maps to the TR-159 attribute aGroupPerfTcaEnable."
REFERENCE REFERENCE
"[TR-159] 5.5.1.38" "[TR-159] 5.5.1.38"
::= { gBondPortConfEntry 10 } ::= { gBondPortConfEntry 10 }
gBondPortCapTable OBJECT-TYPE gBondPortCapTable OBJECT-TYPE
SYNTAX SEQUENCE OF GBondPortCapEntry SYNTAX SEQUENCE OF GBondPortCapEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Table for capabilities of G.Bond Ports. Entries in this table "Table for capabilities of G.Bond Ports. Entries in this table
skipping to change at page 37, line 9 skipping to change at page 37, line 47
REFERENCE REFERENCE
"[TR-159] 5.5.1.16" "[TR-159] 5.5.1.16"
::= { gBondPortStatEntry 4 } ::= { gBondPortStatEntry 4 }
gBondPortStatFltStatus OBJECT-TYPE gBondPortStatFltStatus OBJECT-TYPE
SYNTAX BITS { SYNTAX BITS {
noPeer(0), noPeer(0),
peerPowerLoss(1), peerPowerLoss(1),
peerBondSchemeMismatch(2), peerBondSchemeMismatch(2),
bceSubTypeMismatch(3), bceSubTypeMismatch(3),
lowRate(4) lowRate(4),
init(5),
ready(6)
} }
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"G.Bond (GBS) port Fault Status. This is a bitmap of possible "G.Bond (GBS) port Fault Status. This is a bitmap of possible
conditions. The various bit positions are: conditions. The various bit positions are:
noPeer - peer GBS cannot be reached (e.g., noPeer - peer GBS cannot be reached (e.g.,
no BCEs attached, all BCEs are Down no BCEs attached, all BCEs are Down
etc.). etc.).
peerPowerLoss - peer GBS has indicated impending unit peerPowerLoss - peer GBS has indicated impending unit
skipping to change at page 37, line 32 skipping to change at page 38, line 25
peerBondSchemeMismatch - operating bonding scheme of a peer peerBondSchemeMismatch - operating bonding scheme of a peer
GBS is different from the local one. GBS is different from the local one.
bceSubTypeMismatch - local BCEs in the aggregation group bceSubTypeMismatch - local BCEs in the aggregation group
are not of the same sub-type, e.g., are not of the same sub-type, e.g.,
some BCEs in the local device are -O some BCEs in the local device are -O
while others are -R subtype. while others are -R subtype.
lowRate - gBondUpRate/gBondDnRate of the port lowRate - gBondUpRate/gBondDnRate of the port
has reached or dropped below has reached or dropped below
gBondPortConfThreshLowUpRate/ gBondPortConfThreshLowUpRate/
gBondPortConfThreshLowDnRate. gBondPortConfThreshLowDnRate.
init - The link is Initializing, as a result of
ifAdminStatus being set to 'up' for a
particular BCE or a GBS to which the BCE
is connected.
ready - at least one BCE in the aggregation
group is detecting handshake tones.
This object is intended to supplement ifOperStatus object This object is intended to supplement ifOperStatus object
in IF-MIB and ifMauMediaAvailable in MAU-MIB. in IF-MIB.
This object maps to the TR-159 attribute aGroupStatus." This object maps to the TR-159 attribute aGroupStatus."
REFERENCE REFERENCE
"[TR-159] 5.5.1.9; IF-MIB, ifOperStatus; MAU-MIB, "[TR-159] 5.5.1.9; IF-MIB, ifOperStatus"
ifMauMediaAvailable"
::= { gBondPortStatEntry 5 } ::= { gBondPortStatEntry 5 }
gBondPortStatSide OBJECT-TYPE gBondPortStatSide OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
subscriber(1), subscriber(1),
office(2), office(2),
unknown(3) unknown(3)
} }
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
skipping to change at page 39, line 38 skipping to change at page 40, line 35
gBondPortPmCur1DayValidIntervals Unsigned32, gBondPortPmCur1DayValidIntervals Unsigned32,
gBondPortPmCur1DayInvalidIntervals Unsigned32, gBondPortPmCur1DayInvalidIntervals Unsigned32,
gBondPortPmCur1DayTimeElapsed HCPerfTimeElapsed, gBondPortPmCur1DayTimeElapsed HCPerfTimeElapsed,
gBondPortPmCur1DayES HCPerfCurrentCount, gBondPortPmCur1DayES HCPerfCurrentCount,
gBondPortPmCur1DaySES HCPerfCurrentCount, gBondPortPmCur1DaySES HCPerfCurrentCount,
gBondPortPmCur1DayUAS HCPerfCurrentCount gBondPortPmCur1DayUAS HCPerfCurrentCount
} }
gBondPortPmCurES OBJECT-TYPE gBondPortPmCurES OBJECT-TYPE
SYNTAX HCPerfTotalCount SYNTAX HCPerfTotalCount
UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A count of Errored Seconds (ES) on the GBS since the BTU was "A count of Errored Seconds (ES) on the GBS since the BTU was
last restarted. last restarted.
An Errored Second for a G.998.x interface is defined as a count An Errored Second for a G.998.x interface is defined as a count
of 1-second intervals during which one or more GBS errors are of 1-second intervals during which one or more GBS errors are
declared. The errors are specific for each bonding scheme, e.g. declared. The errors are specific for each bonding scheme, e.g.
- lost cells for the ATM bonding; - lost cells for the ATM bonding;
skipping to change at page 40, line 6 skipping to change at page 41, line 4
An Errored Second for a G.998.x interface is defined as a count An Errored Second for a G.998.x interface is defined as a count
of 1-second intervals during which one or more GBS errors are of 1-second intervals during which one or more GBS errors are
declared. The errors are specific for each bonding scheme, e.g. declared. The errors are specific for each bonding scheme, e.g.
- lost cells for the ATM bonding; - lost cells for the ATM bonding;
- lost or discarded (due to an error or a buffer overflow) - lost or discarded (due to an error or a buffer overflow)
fragments for the Ethernet bonding; fragments for the Ethernet bonding;
- CRC4, CRC6 or CRC8 errors for the TDIM bonding - CRC4, CRC6 or CRC8 errors for the TDIM bonding
This object is inhibited during Unavailable Seconds (UAS). This object is inhibited during Unavailable Seconds (UAS).
This object maps to the TR-159 attribute aGroupPerfES." This object maps to the TR-159 attribute aGroupPerfES."
REFERENCE REFERENCE
"[TR-159] 5.5.1.29" "[TR-159] 5.5.1.29"
::= { gBondPortPmCurEntry 1 } ::= { gBondPortPmCurEntry 1 }
gBondPortPmCurSES OBJECT-TYPE gBondPortPmCurSES OBJECT-TYPE
SYNTAX HCPerfTotalCount SYNTAX HCPerfTotalCount
UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A count of Severely Errored Seconds (SES) on the GBS since the "A count of Severely Errored Seconds (SES) on the GBS since the
BTU was last restarted. BTU was last restarted.
A Severely Errored Second for a G.998.x interface is defined as A Severely Errored Second for a G.998.x interface is defined as
a count of 1-second intervals during which GBS errors cause at a count of 1-second intervals during which GBS errors cause at
least 1% traffic loss of the nominal bonded link rate or at least 1% traffic loss of the nominal bonded link rate or at
least 12ms for the TDM traffic. The exact definition is specific least 12ms for the TDM traffic. The exact definition is specific
skipping to change at page 40, line 39 skipping to change at page 41, line 39
for the TDM bonding for the TDM bonding
This object is inhibited during Unavailable Seconds (UAS). This object is inhibited during Unavailable Seconds (UAS).
This object maps to the TR-159 attribute aGroupPerfSES." This object maps to the TR-159 attribute aGroupPerfSES."
REFERENCE REFERENCE
"[TR-159] 5.5.1.30" "[TR-159] 5.5.1.30"
::= { gBondPortPmCurEntry 2 } ::= { gBondPortPmCurEntry 2 }
gBondPortPmCurUAS OBJECT-TYPE gBondPortPmCurUAS OBJECT-TYPE
SYNTAX HCPerfTotalCount SYNTAX HCPerfTotalCount
UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A count of Unavailable Seconds (UAS) on the GBS since the BTU "A count of Unavailable Seconds (UAS) on the GBS since the BTU
was last restarted. was last restarted.
An Unavailable Second for a G.998.x interface is defined as a An Unavailable Second for a G.998.x interface is defined as a
count of 1-second intervals during which the bonded link is count of 1-second intervals during which the bonded link is
unavailable. The G.998.x link becomes unavailable at the onset unavailable. The G.998.x link becomes unavailable at the onset
of 10 contiguous SESs. The 10 SESs are included in the of 10 contiguous SESs. The 10 SESs are included in the
skipping to change at page 41, line 48 skipping to change at page 42, line 48
where the data for some intervals are not available. where the data for some intervals are not available.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupPerf15MinInvalidIntervals." aGroupPerf15MinInvalidIntervals."
REFERENCE REFERENCE
"[TR-159] 5.5.1.33" "[TR-159] 5.5.1.33"
::= { gBondPortPmCurEntry 5 } ::= { gBondPortPmCurEntry 5 }
gBondPortPmCur15MinTimeElapsed OBJECT-TYPE gBondPortPmCur15MinTimeElapsed OBJECT-TYPE
SYNTAX HCPerfTimeElapsed SYNTAX HCPerfTimeElapsed
UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A count of seconds that have elapsed since the beginning of the "A count of seconds that have elapsed since the beginning of the
current 15-minute performance interval. current 15-minute performance interval.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupPerfCurr15MinTimeElapsed." aGroupPerfCurr15MinTimeElapsed."
REFERENCE REFERENCE
"[TR-159] 5.5.1.34" "[TR-159] 5.5.1.34"
::= { gBondPortPmCurEntry 6 } ::= { gBondPortPmCurEntry 6 }
gBondPortPmCur15MinES OBJECT-TYPE gBondPortPmCur15MinES OBJECT-TYPE
SYNTAX HCPerfCurrentCount SYNTAX HCPerfCurrentCount
UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A count of Errored Seconds (ES) on the GBS in the current "A count of Errored Seconds (ES) on the GBS in the current
15-minute performance interval. 15-minute performance interval.
This object maps to the TR-159 attribute aGroupPerfCurr15MinES." This object maps to the TR-159 attribute aGroupPerfCurr15MinES."
REFERENCE REFERENCE
"[TR-159] 5.5.1.35" "[TR-159] 5.5.1.35"
::= { gBondPortPmCurEntry 7 } ::= { gBondPortPmCurEntry 7 }
gBondPortPmCur15MinSES OBJECT-TYPE gBondPortPmCur15MinSES OBJECT-TYPE
SYNTAX HCPerfCurrentCount SYNTAX HCPerfCurrentCount
UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A count of Severely Errored Seconds (ES) on the GBS in the "A count of Severely Errored Seconds (ES) on the GBS in the
current 15-minute performance interval. current 15-minute performance interval.
This object maps to the TR-159 attribute aGroupPerfCurr15MinSES." This object maps to the TR-159 attribute aGroupPerfCurr15MinSES."
REFERENCE REFERENCE
"[TR-159] 5.5.1.36" "[TR-159] 5.5.1.36"
::= { gBondPortPmCurEntry 8 } ::= { gBondPortPmCurEntry 8 }
gBondPortPmCur15MinUAS OBJECT-TYPE gBondPortPmCur15MinUAS OBJECT-TYPE
SYNTAX HCPerfCurrentCount SYNTAX HCPerfCurrentCount
UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A count of Unavailable Seconds (UAS) on the GBS in the current "A count of Unavailable Seconds (UAS) on the GBS in the current
15-minute performance interval. 15-minute performance interval.
This object maps to the TR-159 attribute aGroupPerfCurr15MinUAS." This object maps to the TR-159 attribute aGroupPerfCurr15MinUAS."
REFERENCE REFERENCE
"[TR-159] 5.5.1.37" "[TR-159] 5.5.1.37"
::= { gBondPortPmCurEntry 9 } ::= { gBondPortPmCurEntry 9 }
gBondPortPmCur1DayValidIntervals OBJECT-TYPE gBondPortPmCur1DayValidIntervals OBJECT-TYPE
SYNTAX Unsigned32 (0..7) SYNTAX Unsigned32 (0..7)
UNITS "days"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A number of 1-day intervals for which data was collected. "A number of 1-day intervals for which data was collected.
The value of this object will be 7 or the maximum number of The value of this object will be 7 or the maximum number of
1-day history intervals collected by the implementation unless 1-day history intervals collected by the implementation unless
the measurement was (re-)started recently, in which case the the measurement was (re-)started recently, in which case the
value will be the number of complete 1-day intervals for which value will be the number of complete 1-day intervals for which
there are at least some data. there are at least some data.
In certain cases it is possible that some intervals are In certain cases it is possible that some intervals are
skipping to change at page 43, line 24 skipping to change at page 44, line 31
interval number for which data is available. interval number for which data is available.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupPerf1DayValidIntervals." aGroupPerf1DayValidIntervals."
REFERENCE REFERENCE
"[TR-159] 5.5.1.45" "[TR-159] 5.5.1.45"
::= { gBondPortPmCurEntry 10 } ::= { gBondPortPmCurEntry 10 }
gBondPortPmCur1DayInvalidIntervals OBJECT-TYPE gBondPortPmCur1DayInvalidIntervals OBJECT-TYPE
SYNTAX Unsigned32 (0..7) SYNTAX Unsigned32 (0..7)
UNITS "days"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A number of 1-day intervals for which data was not always "A number of 1-day intervals for which data was not always
available. The value will typically be zero except in cases available. The value will typically be zero except in cases
where the data for some intervals are not available. where the data for some intervals are not available.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupPerf1DayInvalidIntervals." aGroupPerf1DayInvalidIntervals."
REFERENCE REFERENCE
"[TR-159] 5.5.1.46" "[TR-159] 5.5.1.46"
::= { gBondPortPmCurEntry 11 } ::= { gBondPortPmCurEntry 11 }
gBondPortPmCur1DayTimeElapsed OBJECT-TYPE gBondPortPmCur1DayTimeElapsed OBJECT-TYPE
SYNTAX HCPerfTimeElapsed SYNTAX HCPerfTimeElapsed
UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A count of seconds that have elapsed since the beginning of "A count of seconds that have elapsed since the beginning of
the current 1-day performance interval. the current 1-day performance interval.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupPerfCurr1DayTimeElapsed." aGroupPerfCurr1DayTimeElapsed."
REFERENCE REFERENCE
"[TR-159] 5.5.1.47" "[TR-159] 5.5.1.47"
::= { gBondPortPmCurEntry 12 } ::= { gBondPortPmCurEntry 12 }
gBondPortPmCur1DayES OBJECT-TYPE gBondPortPmCur1DayES OBJECT-TYPE
SYNTAX HCPerfCurrentCount SYNTAX HCPerfCurrentCount
UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A count of Errored Seconds (ES) on the GBS in the current 1-day "A count of Errored Seconds (ES) on the GBS in the current 1-day
performance interval. performance interval.
This object maps to the TR-159 attribute aGroupPerfCurr1DayES." This object maps to the TR-159 attribute aGroupPerfCurr1DayES."
REFERENCE REFERENCE
"[TR-159] 5.5.1.48" "[TR-159] 5.5.1.48"
::= { gBondPortPmCurEntry 13 } ::= { gBondPortPmCurEntry 13 }
gBondPortPmCur1DaySES OBJECT-TYPE gBondPortPmCur1DaySES OBJECT-TYPE
SYNTAX HCPerfCurrentCount SYNTAX HCPerfCurrentCount
UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A count of Severely Errored Seconds (ES) on the GBS in the "A count of Severely Errored Seconds (ES) on the GBS in the
current 1-day performance interval. current 1-day performance interval.
This object maps to the TR-159 attribute aGroupPerfCurr1DaySES." This object maps to the TR-159 attribute aGroupPerfCurr1DaySES."
REFERENCE REFERENCE
"[TR-159] 5.5.1.49" "[TR-159] 5.5.1.49"
::= { gBondPortPmCurEntry 14 } ::= { gBondPortPmCurEntry 14 }
gBondPortPmCur1DayUAS OBJECT-TYPE gBondPortPmCur1DayUAS OBJECT-TYPE
SYNTAX HCPerfCurrentCount SYNTAX HCPerfCurrentCount
UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A count of Unavailable Seconds (UAS) on the GBS in the current "A count of Unavailable Seconds (UAS) on the GBS in the current
1-day performance interval. 1-day performance interval.
This object maps to the TR-159 attribute aGroupPerfCurr1DayUAS." This object maps to the TR-159 attribute aGroupPerfCurr1DayUAS."
REFERENCE REFERENCE
"[TR-159] 5.5.1.50" "[TR-159] 5.5.1.50"
::= { gBondPortPmCurEntry 15 } ::= { gBondPortPmCurEntry 15 }
skipping to change at page 45, line 43 skipping to change at page 47, line 4
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Performance Data Interval number. 1 is the most recent previous "Performance Data Interval number. 1 is the most recent previous
interval; interval 96 is 24 hours ago. interval; interval 96 is 24 hours ago.
Intervals 2..96 are OPTIONAL. Intervals 2..96 are OPTIONAL.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupPerf15MinIntervalNumber." aGroupPerf15MinIntervalNumber."
REFERENCE REFERENCE
"[TR-159] 5.5.1.57" "[TR-159] 5.5.1.57"
::= { gBondPortPm15MinEntry 1 } ::= { gBondPortPm15MinEntry 1 }
gBondPortPm15MinIntervalMoniTime OBJECT-TYPE gBondPortPm15MinIntervalMoniTime OBJECT-TYPE
SYNTAX HCPerfTimeElapsed SYNTAX HCPerfTimeElapsed
UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A count of seconds over which the performance data was actually "A count of seconds over which the performance data was actually
monitored. This value will be the same as the interval duration monitored. This value will be the same as the interval duration
(900 seconds), except in a situation where performance data (900 seconds), except in a situation where performance data
could not be collected for any reason." could not be collected for any reason."
::= { gBondPortPm15MinEntry 2 } ::= { gBondPortPm15MinEntry 2 }
gBondPortPm15MinIntervalES OBJECT-TYPE gBondPortPm15MinIntervalES OBJECT-TYPE
SYNTAX HCPerfIntervalCount SYNTAX HCPerfIntervalCount
UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A count of Errored Seconds (ES) on the GBS in the 15-minute "A count of Errored Seconds (ES) on the GBS in the 15-minute
performance history interval. performance history interval.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupPerf15MinIntervalES." aGroupPerf15MinIntervalES."
REFERENCE REFERENCE
"[TR-159] 5.5.1.59" "[TR-159] 5.5.1.59"
::= { gBondPortPm15MinEntry 3 } ::= { gBondPortPm15MinEntry 3 }
gBondPortPm15MinIntervalSES OBJECT-TYPE gBondPortPm15MinIntervalSES OBJECT-TYPE
SYNTAX HCPerfIntervalCount SYNTAX HCPerfIntervalCount
UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A count of Severely Errored Seconds (ES) on the GBS in the "A count of Severely Errored Seconds (ES) on the GBS in the
15-minute performance history interval. 15-minute performance history interval.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupPerf15MinIntervalSES." aGroupPerf15MinIntervalSES."
REFERENCE REFERENCE
"[TR-159] 5.5.1.60" "[TR-159] 5.5.1.60"
::= { gBondPortPm15MinEntry 4 } ::= { gBondPortPm15MinEntry 4 }
gBondPortPm15MinIntervalUAS OBJECT-TYPE gBondPortPm15MinIntervalUAS OBJECT-TYPE
SYNTAX HCPerfIntervalCount SYNTAX HCPerfIntervalCount
UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A count of Unavailable Seconds (UAS) on the GBS in the current "A count of Unavailable Seconds (UAS) on the GBS in the current
15-minute performance interval. 15-minute performance interval.
This object maps to the TR-159 attribute aGroupPerfCurr15MinUAS." This object maps to the TR-159 attribute aGroupPerfCurr15MinUAS."
REFERENCE REFERENCE
"[TR-159] 5.5.1.61" "[TR-159] 5.5.1.61"
::= { gBondPortPm15MinEntry 5 } ::= { gBondPortPm15MinEntry 5 }
skipping to change at page 48, line 26 skipping to change at page 49, line 40
Intervals 2..7 are OPTIONAL. Intervals 2..7 are OPTIONAL.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupPerf1DayIntervalNumber." aGroupPerf1DayIntervalNumber."
REFERENCE REFERENCE
"[TR-159] 5.5.1.62" "[TR-159] 5.5.1.62"
::= { gBondPortPm1DayEntry 1 } ::= { gBondPortPm1DayEntry 1 }
gBondPortPm1DayIntervalMoniTime OBJECT-TYPE gBondPortPm1DayIntervalMoniTime OBJECT-TYPE
SYNTAX HCPerfTimeElapsed SYNTAX HCPerfTimeElapsed
UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A count of seconds over which the performance data was actually "A count of seconds over which the performance data was actually
monitored. This value will be the same as the interval duration monitored. This value will be the same as the interval duration
(86400 seconds), except in a situation where performance data (86400 seconds), except in a situation where performance data
could not be collected for any reason. could not be collected for any reason.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupPerf1DayIntervalMoniSecs." aGroupPerf1DayIntervalMoniSecs."
REFERENCE REFERENCE
"[TR-159] 5.5.1.64" "[TR-159] 5.5.1.64"
::= { gBondPortPm1DayEntry 2 } ::= { gBondPortPm1DayEntry 2 }
gBondPortPm1DayIntervalES OBJECT-TYPE gBondPortPm1DayIntervalES OBJECT-TYPE
SYNTAX HCPerfIntervalCount SYNTAX HCPerfIntervalCount
UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A count of Errored Seconds (ES) on the GBS in the 1-day "A count of Errored Seconds (ES) on the GBS in the 1-day
performance history interval. performance history interval.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupPerf1DayIntervalES." aGroupPerf1DayIntervalES."
REFERENCE REFERENCE
"[TR-159] 5.5.1.65" "[TR-159] 5.5.1.65"
skipping to change at page 49, line 4 skipping to change at page 50, line 20
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A count of Errored Seconds (ES) on the GBS in the 1-day "A count of Errored Seconds (ES) on the GBS in the 1-day
performance history interval. performance history interval.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupPerf1DayIntervalES." aGroupPerf1DayIntervalES."
REFERENCE REFERENCE
"[TR-159] 5.5.1.65" "[TR-159] 5.5.1.65"
::= { gBondPortPm1DayEntry 3 } ::= { gBondPortPm1DayEntry 3 }
gBondPortPm1DayIntervalSES OBJECT-TYPE gBondPortPm1DayIntervalSES OBJECT-TYPE
SYNTAX HCPerfIntervalCount SYNTAX HCPerfIntervalCount
UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A count of Severely Errored Seconds (ES) on the GBS in the "A count of Severely Errored Seconds (ES) on the GBS in the
1-day performance history interval. 1-day performance history interval.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupPerf1DayIntervalSES." aGroupPerf1DayIntervalSES."
REFERENCE REFERENCE
"[TR-159] 5.5.1.66" "[TR-159] 5.5.1.66"
::= { gBondPortPm1DayEntry 4 } ::= { gBondPortPm1DayEntry 4 }
gBondPortPm1DayIntervalUAS OBJECT-TYPE gBondPortPm1DayIntervalUAS OBJECT-TYPE
SYNTAX HCPerfIntervalCount SYNTAX HCPerfIntervalCount
UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A count of Unavailable Seconds (UAS) on the GBS in the current "A count of Unavailable Seconds (UAS) on the GBS in the current
1-day performance interval. 1-day performance interval.
This object maps to the TR-159 attribute aGroupPerfCurr1DayUAS." This object maps to the TR-159 attribute aGroupPerfCurr1DayUAS."
REFERENCE REFERENCE
"[TR-159] 5.5.1.67" "[TR-159] 5.5.1.67"
::= { gBondPortPm1DayEntry 5 } ::= { gBondPortPm1DayEntry 5 }
skipping to change at page 51, line 16 skipping to change at page 52, line 34
SYNTAX SnmpAdminString (SIZE(1..32)) SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object is a unique index (name) associated with this "This object is a unique index (name) associated with this
GBS PM TCA profile." GBS PM TCA profile."
::= { gBondPortPmTcaProfileEntry 1 } ::= { gBondPortPmTcaProfileEntry 1 }
gBondPortPmTcaProfileThresh15MinES OBJECT-TYPE gBondPortPmTcaProfileThresh15MinES OBJECT-TYPE
SYNTAX HCPerfIntervalThreshold SYNTAX HCPerfIntervalThreshold
UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A desired threshold for the number of Errored Seconds (ES) "A desired threshold for the number of Errored Seconds (ES)
within any given 15-minute performance data collection interval. within any given 15-minute performance data collection interval.
If the number of ESs in a particular 15-minute collection If the number of ESs in a particular 15-minute collection
interval reaches or exceeds this value, a interval reaches or exceeds this value, a
gBondPmTca15MinESCrossing notification MAY be generated if gBondPmTca15MinESCrossing notification MAY be generated if
enabled by gBondPortConfPmTcaEnable. enabled by gBondPortConfPmTcaEnable.
At most one notification can be sent per interval. At most one notification can be sent per interval.
skipping to change at page 51, line 33 skipping to change at page 53, line 4
gBondPmTca15MinESCrossing notification MAY be generated if gBondPmTca15MinESCrossing notification MAY be generated if
enabled by gBondPortConfPmTcaEnable. enabled by gBondPortConfPmTcaEnable.
At most one notification can be sent per interval. At most one notification can be sent per interval.
Setting this attribute to zero (default) effectively disables Setting this attribute to zero (default) effectively disables
gBondPmTca15MinESCrossing notification. gBondPmTca15MinESCrossing notification.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupPerfThreshold15MinES." aGroupPerfThreshold15MinES."
REFERENCE REFERENCE
"[TR-159] 5.5.1.39" "[TR-159] 5.5.1.39"
::= { gBondPortPmTcaProfileEntry 2 } ::= { gBondPortPmTcaProfileEntry 2 }
gBondPortPmTcaProfileThresh15MinSES OBJECT-TYPE gBondPortPmTcaProfileThresh15MinSES OBJECT-TYPE
SYNTAX HCPerfIntervalThreshold SYNTAX HCPerfIntervalThreshold
UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A desired threshold for the number of Severely Errored Seconds "A desired threshold for the number of Severely Errored Seconds
(SES) within any given 15-minute performance data collection (SES) within any given 15-minute performance data collection
interval. interval.
If the number of SESs in a particular 15-minute collection If the number of SESs in a particular 15-minute collection
interval reaches or exceeds this value, a interval reaches or exceeds this value, a
gBondPmTca15MinSESCrossing notification MAY be generated if gBondPmTca15MinSESCrossing notification MAY be generated if
enabled by gBondPortConfPmTcaEnable. enabled by gBondPortConfPmTcaEnable.
skipping to change at page 52, line 4 skipping to change at page 53, line 26
If the number of SESs in a particular 15-minute collection If the number of SESs in a particular 15-minute collection
interval reaches or exceeds this value, a interval reaches or exceeds this value, a
gBondPmTca15MinSESCrossing notification MAY be generated if gBondPmTca15MinSESCrossing notification MAY be generated if
enabled by gBondPortConfPmTcaEnable. enabled by gBondPortConfPmTcaEnable.
At most one notification can be sent per interval. At most one notification can be sent per interval.
Setting this attribute to zero (default) effectively disables Setting this attribute to zero (default) effectively disables
gBondPmTca15MinSESCrossing notification. gBondPmTca15MinSESCrossing notification.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupPerfThreshold15MinSES." aGroupPerfThreshold15MinSES."
REFERENCE REFERENCE
"[TR-159] 5.5.1.40" "[TR-159] 5.5.1.40"
::= { gBondPortPmTcaProfileEntry 3 } ::= { gBondPortPmTcaProfileEntry 3 }
gBondPortPmTcaProfileThresh15MinUAS OBJECT-TYPE gBondPortPmTcaProfileThresh15MinUAS OBJECT-TYPE
SYNTAX HCPerfIntervalThreshold SYNTAX HCPerfIntervalThreshold
UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A desired threshold for the number of Unavailable Seconds (UAS) "A desired threshold for the number of Unavailable Seconds (UAS)
within any given 15-minute performance data collection interval. within any given 15-minute performance data collection interval.
If the number of UASs in a particular 15-minute collection If the number of UASs in a particular 15-minute collection
interval reaches or exceeds this value, a interval reaches or exceeds this value, a
gBondPmTca15MinUASCrossing notification MAY be generated if gBondPmTca15MinUASCrossing notification MAY be generated if
enabled by gBondPortConfPmTcaEnable. enabled by gBondPortConfPmTcaEnable.
At most one notification can be sent per interval. At most one notification can be sent per interval.
skipping to change at page 52, line 32 skipping to change at page 54, line 5
gBondPmTca15MinUASCrossing notification. gBondPmTca15MinUASCrossing notification.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupPerfThreshold15MinUAS." aGroupPerfThreshold15MinUAS."
REFERENCE REFERENCE
"[TR-159] 5.5.1.41" "[TR-159] 5.5.1.41"
::= { gBondPortPmTcaProfileEntry 4 } ::= { gBondPortPmTcaProfileEntry 4 }
gBondPortPmTcaProfileThresh1DayES OBJECT-TYPE gBondPortPmTcaProfileThresh1DayES OBJECT-TYPE
SYNTAX GBondPm1DayIntervalThreshold SYNTAX GBondPm1DayIntervalThreshold
UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A desired threshold for the number of Errored Seconds (ES) "A desired threshold for the number of Errored Seconds (ES)
within any given 1-day performance data collection interval. within any given 1-day performance data collection interval.
If the number of ESs in a particular 1-day collection interval If the number of ESs in a particular 1-day collection interval
reaches or exceeds this value, a gBondPmTca1DayESCrossing reaches or exceeds this value, a gBondPmTca1DayESCrossing
notification MAY be generated if enabled by notification MAY be generated if enabled by
gBondPortConfPmTcaEnable. gBondPortConfPmTcaEnable.
At most one notification can be sent per interval. At most one notification can be sent per interval.
skipping to change at page 53, line 4 skipping to change at page 54, line 27
gBondPmTca1DayESCrossing notification. gBondPmTca1DayESCrossing notification.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupPerfThreshold1DayES." aGroupPerfThreshold1DayES."
REFERENCE REFERENCE
"[TR-159] 5.5.1.51" "[TR-159] 5.5.1.51"
::= { gBondPortPmTcaProfileEntry 5 } ::= { gBondPortPmTcaProfileEntry 5 }
gBondPortPmTcaProfileThresh1DaySES OBJECT-TYPE gBondPortPmTcaProfileThresh1DaySES OBJECT-TYPE
SYNTAX GBondPm1DayIntervalThreshold SYNTAX GBondPm1DayIntervalThreshold
UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A desired threshold for the number of Severely Errored Seconds "A desired threshold for the number of Severely Errored Seconds
(SES) within any given 1-day performance data collection (SES) within any given 1-day performance data collection
interval. interval.
If the number of SESs in a particular 1-day collection interval If the number of SESs in a particular 1-day collection interval
reaches or exceeds this value, a gBondPmTca1DaySESCrossing reaches or exceeds this value, a gBondPmTca1DaySESCrossing
notification MAY be generated if enabled by notification MAY be generated if enabled by
gBondPortConfPmTcaEnable. gBondPortConfPmTcaEnable.
skipping to change at page 53, line 26 skipping to change at page 54, line 50
gBondPmTca1DaySESCrossing notification. gBondPmTca1DaySESCrossing notification.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupPerfThreshold1DaySES." aGroupPerfThreshold1DaySES."
REFERENCE REFERENCE
"[TR-159] 5.5.1.52" "[TR-159] 5.5.1.52"
::= { gBondPortPmTcaProfileEntry 6 } ::= { gBondPortPmTcaProfileEntry 6 }
gBondPortPmTcaProfileThresh1DayUAS OBJECT-TYPE gBondPortPmTcaProfileThresh1DayUAS OBJECT-TYPE
SYNTAX GBondPm1DayIntervalThreshold SYNTAX GBondPm1DayIntervalThreshold
UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A desired threshold for the number of Unavailable Seconds (UAS) "A desired threshold for the number of Unavailable Seconds (UAS)
within any given 1-day performance data collection interval. within any given 1-day performance data collection interval.
If the number of UASs in a particular 1-day collection interval If the number of UASs in a particular 1-day collection interval
reaches or exceeds this value, a gBondPmTca1DayUASCrossing reaches or exceeds this value, a gBondPmTca1DayUASCrossing
notification MAY be generated if enabled by notification MAY be generated if enabled by
gBondPortConfPmTcaEnable. gBondPortConfPmTcaEnable.
At most one notification can be sent per interval. At most one notification can be sent per interval.
skipping to change at page 55, line 22 skipping to change at page 56, line 48
at the peer GBS SHALL be the same as gBondPortConfDiscoveryCode at the peer GBS SHALL be the same as gBondPortConfDiscoveryCode
of the local GBS associated with the BCE for the operation to of the local GBS associated with the BCE for the operation to
succeed). succeed).
Writing a non-zero value to this object results in a Writing a non-zero value to this object results in a
Discovery Set_if_Clear operation. Discovery Set_if_Clear operation.
A zero-length octet string SHALL be returned on an attempt to A zero-length octet string SHALL be returned on an attempt to
read this object when GAF aggregation is not enabled. read this object when GAF aggregation is not enabled.
This object is irrelevant in BCE-R port subtypes (CPE side): This object is irrelevant in BCE-R port subtypes (CPE side):
in this case a zero length octet string SHALL be returned on in this case a zero length octet string SHALL be returned on
an attempt to read this object, writing to this object SHALL an attempt to read this object, an attempt to change this object
be rejected. MUST be rejected (in case of SNMP with the error
inconsistentValue).
Discovery MUST be performed when the link is Down. Discovery MUST be performed when the link is Down.
Attempts to change this object MUST be rejected (in case of Attempts to change this object MUST be rejected (in case of
SNMP with the error inconsistentValue), If the link is Up or SNMP with the error inconsistentValue), If the link is Up or
Initializing. Initializing.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aLineRemoteDiscoveryCode." aLineRemoteDiscoveryCode."
REFERENCE REFERENCE
"[TR-159] 5.5.6.7" "[TR-159] 5.5.6.7"
::= { gBondBceConfEntry 1 } ::= { gBondBceConfEntry 1 }
skipping to change at page 62, line 29 skipping to change at page 64, line 5
[IANAifType-MIB]. [IANAifType-MIB].
An object identifier for gBondMIB MODULE-IDENTITY SHALL be allocated An object identifier for gBondMIB MODULE-IDENTITY SHALL be allocated
by IANA in the MIB-2 transmission sub-tree, before this document is by IANA in the MIB-2 transmission sub-tree, before this document is
published. published.
9. Acknowledgments 9. Acknowledgments
This document was produced by the [ADSLMIB] working group. This document was produced by the [ADSLMIB] working group.
Special thanks to Dan Romascanu for his meticulous review of this
text.
10. References 10. References
10.1. Normative References 10.1. Normative References
[RFC2119] Bradner, S., "Key words for use in [RFC2119] Bradner, S., "Key words for use in
RFCs to Indicate Requirement RFCs to Indicate Requirement
Levels", BCP 14, RFC 2119, Levels", BCP 14, RFC 2119,
March 1997. March 1997.
[RFC2578] McCloghrie, K., Ed., Perkins, D., [RFC2578] McCloghrie, K., Ed., Perkins, D.,
skipping to change at page 65, line 12 skipping to change at page 66, line 40
Interfaces MIB", draft-ietf- Interfaces MIB", draft-ietf-
adslmib-gbond-tdim-mib-07 (work in adslmib-gbond-tdim-mib-07 (work in
progress), Feb 2012. progress), Feb 2012.
[IANAifType-MIB] Internet Assigned Numbers [IANAifType-MIB] Internet Assigned Numbers
Authority (IANA), "IANAifType Authority (IANA), "IANAifType
Textual Convention definition", <h Textual Convention definition", <h
ttp://www.iana.org/assignments/ ttp://www.iana.org/assignments/
ianaiftype-mib>. ianaiftype-mib>.
[RFC2790] Waldbusser, S. and P. Grillo,
"Host Resources MIB", RFC 2790,
March 2000.
[RFC2864] McCloghrie, K. and G. Hanson, "The [RFC2864] McCloghrie, K. and G. Hanson, "The
Inverted Stack Table Extension to Inverted Stack Table Extension to
the Interfaces Group MIB", the Interfaces Group MIB",
RFC 2864, June 2000. RFC 2864, June 2000.
[RFC3410] Case, J., Mundy, R., Partain, D., [RFC3410] Case, J., Mundy, R., Partain, D.,
and B. Stewart, "Introduction and and B. Stewart, "Introduction and
Applicability Statements for Applicability Statements for
Internet-Standard Management Internet-Standard Management
Framework", RFC 3410, Framework", RFC 3410,
December 2002. December 2002.
[RFC3413] Levi, D., Meyer, P., and B.
Stewart, "Simple Network
Management Protocol (SNMP)
Applications", STD 62, RFC 3413,
December 2002.
[RFC3414] Blumenthal, U. and B. Wijnen, [RFC3414] Blumenthal, U. and B. Wijnen,
"User-based Security Model (USM) "User-based Security Model (USM)
for version 3 of the Simple for version 3 of the Simple
Network Management Protocol Network Management Protocol
(SNMPv3)", STD 62, RFC 3414, (SNMPv3)", STD 62, RFC 3414,
December 2002. December 2002.
[RFC3440] Ly, F. and G. Bathrick, [RFC3440] Ly, F. and G. Bathrick,
"Definitions of Extension Managed "Definitions of Extension Managed
Objects for Asymmetric Digital Objects for Asymmetric Digital
skipping to change at page 66, line 32 skipping to change at page 68, line 9
(SHDSL) Lines", RFC 4319, (SHDSL) Lines", RFC 4319,
December 2005. December 2005.
[RFC4706] Morgenstern, M., Dodge, M., [RFC4706] Morgenstern, M., Dodge, M.,
Baillie, S., and U. Bonollo, Baillie, S., and U. Bonollo,
"Definitions of Managed Objects "Definitions of Managed Objects
for Asymmetric Digital Subscriber for Asymmetric Digital Subscriber
Line 2 (ADSL2)", RFC 4706, Line 2 (ADSL2)", RFC 4706,
November 2006. November 2006.
[RFC4836] Beili, E., "Definitions of Managed
Objects for IEEE 802.3 Medium
Attachment Units (MAUs)",
RFC 4836, April 2007.
[RFC5066] Beili, E., "Ethernet in the First [RFC5066] Beili, E., "Ethernet in the First
Mile Copper (EFMCu) Interfaces Mile Copper (EFMCu) Interfaces
MIB", RFC 5066, November 2007. MIB", RFC 5066, November 2007.
[RFC5591] Harrington, D. and W. Hardaker, [RFC5591] Harrington, D. and W. Hardaker,
"Transport Security Model for the "Transport Security Model for the
Simple Network Management Protocol Simple Network Management Protocol
(SNMP)", RFC 5591, June 2009. (SNMP)", RFC 5591, June 2009.
[RFC5592] Harrington, D., Salowey, J., and [RFC5592] Harrington, D., Salowey, J., and
 End of changes. 90 change blocks. 
90 lines changed or deleted 152 lines changed or added

This html diff was produced by rfcdiff 1.41. The latest version is available from http://tools.ietf.org/tools/rfcdiff/