draft-ietf-adslmib-gbond-mib-11.txt   rfc6765.txt 
Network Working Group E. Beili Internet Engineering Task Force (IETF) E. Beili
Internet-Draft Actelis Networks Request for Comments: 6765 Actelis Networks
Intended status: Standards Track M. Morgenstern Category: Standards Track M. Morgenstern
Expires: January 17, 2013 ECI Telecom ISSN: 2070-1721 ECI Telecom
Jul 16, 2012 February 2013
xDSL multi-pair bonding (G.Bond) MIB xDSL Multi-Pair Bonding (G.Bond) MIB
draft-ietf-adslmib-gbond-mib-11.txt
Abstract Abstract
This document defines Management Information Base (MIB) module for This document defines a Management Information Base (MIB) module for
use with network management protocols in TCP/IP-based internets. use with network management protocols in TCP/IP-based internets.
This document defines an extension to the Interfaces Group MIB with a This document defines an extension to the Interfaces Group MIB with a
set of common objects for managing multi-pair bonded Digital set of common objects for managing multi-pair bonded Digital
Subscriber Line (xDSL) interfaces, defined in ITU-T recommendations Subscriber Line (xDSL) interfaces, as defined in ITU-T
G.998.1, G.998.2 and G.998.3. The textual conventions defining the Recommendations G.998.1, G.998.2, and G.998.3. The textual
bonding schemes are contained in a separate Internet Assigned Number conventions defining the bonding schemes are contained in a separate
Authority (IANA) maintained MIB module. The MIB modules specific to MIB module maintained by Internet Assigned Numbers Authority (IANA).
each bonding technology are defined in G9981-MIB, G9982-MIB and The MIB modules specific to each bonding technology are defined in
G9983-MIB respectively. G9981-MIB, G9982-MIB, and G9983-MIB, respectively.
Status of This Memo Status of This Memo
This Internet-Draft is submitted in full conformance with the This is an Internet Standards Track document.
provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet-
Drafts is at http://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months This document is a product of the Internet Engineering Task Force
and may be updated, replaced, or obsoleted by other documents at any (IETF). It represents the consensus of the IETF community. It has
time. It is inappropriate to use Internet-Drafts as reference received public review and has been approved for publication by the
material or to cite them other than as "work in progress." Internet Engineering Steering Group (IESG). Further information on
Internet Standards is available in Section 2 of RFC 5741.
This Internet-Draft will expire on January 17, 2013. Information about the current status of this document, any errata,
and how to provide feedback on it may be obtained at
http://www.rfc-editor.org/info/rfc6765.
Copyright Notice Copyright Notice
Copyright (c) 2012 IETF Trust and the persons identified as the Copyright (c) 2013 IETF Trust and the persons identified as the
document authors. All rights reserved. document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info) in effect on the date of (http://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License. described in the Simplified BSD License.
Table of Contents Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 3 1. Introduction ....................................................3
2. The Internet-Standard Management Framework . . . . . . . . . . 4 2. The Internet-Standard Management Framework ......................4
3. The DSL Forum Management Framework for xDSL Bonding . . . . . 4 3. The Broadband Forum Management Framework for xDSL Bonding .......4
4. Relationship to Other MIB modules . . . . . . . . . . . . . . 4 4. Relationship to Other MIB Modules ...............................5
4.1. Relationship to Interfaces Group MIB module . . . . . . . 5 4.1. Relationship to Interfaces Group MIB Module ................5
4.1.1. Layering Model . . . . . . . . . . . . . . . . . . . . 5 4.1.1. Layering Model ......................................5
4.1.2. xDSL Bonding . . . . . . . . . . . . . . . . . . . . . 7 4.1.2. xDSL Bonding ........................................7
4.1.3. Discovery Operation . . . . . . . . . . . . . . . . . 7 4.1.3. Discovery Operation .................................8
4.1.4. G.Bond ports initialization . . . . . . . . . . . . . 10 4.1.4. Initialization of G.Bond Ports .....................10
4.1.5. Usage of ifTable . . . . . . . . . . . . . . . . . . . 10 4.1.5. Usage of the ifTable ...............................11
4.2. Relationship to G.Bond ATM, ETH and TDIM MIB modules . . . 11 4.2. Relationship to G.Bond ATM, ETH, and TDIM MIB Modules .....13
4.3. Relationship to xDSL MIB modules . . . . . . . . . . . . . 12 4.3. Relationship to xDSL MIB Modules ..........................13
4.4. Addition of new bonding schemes . . . . . . . . . . . . . 12 4.4. Addition of New Bonding Schemes ...........................13
5. MIB Structure . . . . . . . . . . . . . . . . . . . . . . . . 12 5. MIB Structure ..................................................13
5.1. Overview . . . . . . . . . . . . . . . . . . . . . . . . . 12 5.1. Overview ..................................................13
5.2. Performance Monitoring . . . . . . . . . . . . . . . . . . 13 5.2. Performance Monitoring ....................................14
5.3. Mapping of DSL Forum TR-159 Managed Objects . . . . . . . 13 5.3. Mapping of Broadband Forum TR-159 Managed Objects .........14
6. xDSL Multi-pair Bonding MIB Definitions . . . . . . . . . . . 17 6. xDSL Multi-Pair Bonding MIB Definitions ........................19
7. IANA-maintained G.Bond TC Definitions . . . . . . . . . . . . 62 7. IANA-Maintained G.Bond TC Definitions ..........................65
8. Security Considerations . . . . . . . . . . . . . . . . . . . 64 8. Security Considerations ........................................67
9. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 66 9. IANA Considerations ............................................69
10. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . 66 10. Acknowledgments ...............................................69
11. References . . . . . . . . . . . . . . . . . . . . . . . . . . 67 11. References ....................................................70
11.1. Normative References . . . . . . . . . . . . . . . . . . . 67 11.1. Normative References .....................................70
11.2. Informative References . . . . . . . . . . . . . . . . . . 68 11.2. Informative References ...................................71
1. Introduction 1. Introduction
The xDSL Multi-Pair Bonding, allows a service provider to provide xDSL Multi-pair bonding allows a service provider to provide high-
high bandwidth services to business and residential customers over bandwidth services to business and residential customers over
multiple xDSL lines, with greater speed and resiliency, than the multiple xDSL lines, with greater speed and resiliency than service
service over a single xDSL line, bridging the gap between xDSL and over a single xDSL line, bridging the gap between xDSL and fiber-
fiber-based transport. based transport.
Currently there are three xDSL Multi-Pair Bonding schemes, also known Currently, there are three xDSL Multi-pair bonding schemes, also
under collective name G.Bond: known under the collective name "G.Bond":
o The ATM-Based Multi-Pair Bonding, specified in ITU-T G.998.1 o ATM-Based Multi-pair bonding, as specified in ITU-T Recommendation
recommendation [G.998.1], which defines a method for bonding (or G.998.1 [G.998.1], which defines a method for the bonding (or
aggregating) of multiple xDSL lines (or individual bearer channels aggregating) of multiple xDSL lines (or individual bearer channels
in multiple xDSL lines) into a single bi-directional logical link in multiple xDSL lines) into a single bidirectional logical link
carrying an ATM stream. This specification can be viewed as an carrying an ATM stream. This specification can be viewed as an
evolution of the legacy Inverse Multiplexing over ATM (IMA) evolution of the legacy Inverse Multiplexing for ATM (IMA)
technology [af-phy-0086], applied to xDSL with variable rates on technology [AF-PHY-0086], applied to xDSL with variable rates on
each line/bearer channel. each line/bearer channel.
o The Ethernet-Based Multi-Pair Bonding, specified in ITU-T G.998.2 o Ethernet-Based Multi-pair bonding, as specified in ITU-T
recommendation [G.998.2], which defines a method for bonding (or Recommendation G.998.2 [G.998.2], which defines a method for the
aggregating) of multiple xDSL lines (or individual bearer channels bonding (or aggregating) of multiple xDSL lines (or individual
in multiple xDSL lines) into a single bi-directional logical link bearer channels in multiple xDSL lines) into a single
carrying an Ethernet stream. This specification can be viewed as bidirectional logical link carrying an Ethernet stream. This
IEEE 802.3-2005 [802.3] Clause 61 Physical Medium Entity (PME) specification can be viewed as IEEE 802.3-2005 [802.3] Clause 61,
Aggregation, generalized to work over any xDSL technology Physical Medium Entity (PME) Aggregation, generalized to work over
(2Base-TL and 10Pass-TS interfaces defined by IEEE use G.SHDSL and any xDSL technology (2Base-TL and 10Pass-TS interfaces defined by
VDSL technology respectively). IEEE use G.SHDSL (Single-pair High-speed DSL) and VDSL (Very high
speed DSL) technology, respectively).
o The Multi-pair bonding using time-division inverse multiplexing o Multi-pair bonding using Time-Division Inverse Multiplexing
(TDIM), specified in ITU-T G.998.3 recommendation [G.998.3], which (TDIM), specified in ITU-T Recommendation G.998.3 [G.998.3], which
defines a method for bonding (or aggregating) of multiple xDSL defines a method for the bonding (or aggregating) of multiple xDSL
lines into a single bi-directional logical link carrying a mix of lines into a single bidirectional logical link carrying a mix of
various traffic streams (e.g., Ethernet, ATM, TDM). various traffic streams (e.g., Ethernet, ATM, TDM).
Architecturally all three bonding schemes define a new "bonded" Architecturally, all three bonding schemes define a new "bonded"
Transport Protocol Specific - Transmission Convergence (TPS-TC) sub- Transport Protocol Specific - Transmission Convergence (TPS-TC)
layer, stacked above multiple ATM-TC, Ethernet/PTM-TC or STM-TC sub-layer, stacked above multiple ATM-TC, Ethernet/Packet Transfer
(clear channel) sub-layers for the ATM, Ethernet or TDIM bonding Mode-TC (PTM-TC), or Synchronous Transfer Mode-TC (STM-TC) (clear
respectively. Each underlying TPS-TC sub-layer represents a protocol channel) sub-layers for the ATM, Ethernet, or TDIM bonding,
specific interface to an xDSL line or an individual bearer channel of respectively. Each underlying TPS-TC sub-layer represents a
an xDSL line. Bonding of multiple bearer channels in the same xDSL protocol-specific interface to an xDSL line or an individual bearer
line is not allowed. channel of an xDSL line. Bonding of multiple bearer channels in the
same xDSL line is not allowed.
All schemes allow bonding of up to 32 individual line/channel sub- All schemes allow bonding of up to 32 individual line/channel
layers with variable rates, providing common functionality for the sub-layers with variable rates, providing common functionality for
configuration, initialization, operation and monitoring of the bonded the configuration, initialization, operation, and monitoring of the
link. bonded link.
This document defines a MIB module common to all 3 schemes. This document defines a MIB module common to all 3 schemes.
Additional managed objects, specific to each bonding technology, are Additional managed objects specific to each bonding technology are
defined in G9981-MIB [I-D.ietf-adslmib-gbond-atm-mib], G9982-MIB defined in the G9981-MIB [RFC6768], G9982-MIB [RFC6767], and
[I-D.ietf-adslmib-gbond-eth-mib] and G9983-MIB G9983-MIB [RFC6766] modules.
[I-D.ietf-adslmib-gbond-tdim-mib] modules.
The textual conventions listing the bonding schemes are defined in a The textual conventions listing the bonding schemes are defined in a
separate, IANA-maintained MIB module, first version of which is separate, IANA-maintained MIB module, the first version of which is
provided in this document. This arrangement would allow for future provided in this document. This arrangement would allow for future
bonding schemes to be easily supported, without the need to update bonding schemes to be easily supported, without the need to update
the common GBOND-MIB module, the common GBOND-MIB module.
2. The Internet-Standard Management Framework 2. The Internet-Standard Management Framework
For a detailed overview of the documents that describe the current For a detailed overview of the documents that describe the current
Internet-Standard Management Framework, please refer to section 7 of Internet-Standard Management Framework, please refer to section 7 of
RFC 3410 [RFC3410]. RFC 3410 [RFC3410].
Managed objects are accessed via a virtual information store, termed Managed objects are accessed via a virtual information store, termed
the Management Information Base or MIB. MIB objects are generally the Management Information Base or MIB. MIB objects are generally
accessed through the Simple Network Management Protocol (SNMP). accessed through the Simple Network Management Protocol (SNMP).
Objects in the MIB are defined using the mechanisms defined in the Objects in the MIB are defined using the mechanisms defined in the
Structure of Management Information (SMI). This document specifies a Structure of Management Information (SMI). This document specifies a
MIB module that is compliant to the SMIv2, which is described in STD MIB module that is compliant to the SMIv2, which is described in STD
58, RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58, RFC 58, RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58, RFC
2580 [RFC2580]. 2580 [RFC2580].
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
"OPTIONAL" in this document are to be interpreted as described in RFC "OPTIONAL" in this document are to be interpreted as described in BCP
2119 [RFC2119]. 14, RFC 2119 [RFC2119].
3. The DSL Forum Management Framework for xDSL Bonding 3. The Broadband Forum Management Framework for xDSL Bonding
This document makes use of the DSL Forum technical report Management This document makes use of the Broadband Forum technical report
Framework for xDSL Bonding [TR-159], defining a management model and "Management Framework for xDSL Bonding" [TR-159], defining a
a hierarchy of management objects for the bonded xDSL interfaces. management model and a hierarchy of management objects for the bonded
xDSL interfaces.
4. Relationship to Other MIB modules 4. Relationship to Other MIB Modules
This section outlines the relationship of the MIB modules defined in This section outlines the relationship of the MIB modules defined in
this document with other MIB modules described in the relevant RFCs. this document with other MIB modules described in the relevant RFCs.
Specifically, the following MIB modules are discussed: Interfaces Specifically, the following MIB modules are discussed: the Interfaces
Group MIB (IF-MIB), Inverse Stack Table MIB (IF-INVERTED-STACK-MIB) Group MIB (IF-MIB), Inverse Stack Table MIB (IF-INVERTED-STACK-MIB),
Interface Stack Capability MIB (IF-CAP-STACK-MIB), G.Bond scheme and Interface Stack Capability MIB (IF-CAP-STACK-MIB); G.Bond scheme-
specific modules: G.Bond/ATM (G9981-MIB), G.Bond/Ethernet (G9982-MIB) specific modules G.Bond/ATM (G9981-MIB), G.Bond/Ethernet (G9982-MIB),
and G.Bond/TDIM (G9983-MIB), and DSL specific MIB modules: ADSL and G.Bond/TDIM (G9983-MIB); and DSL-specific MIB modules ADSL
(ADSL-LINE-EXT-MIB), ADSL2 (ADSL2-LINE-MIB), SHDSL (HDSL2-SHDSL-LINE- (ADSL-LINE-EXT-MIB), ADSL2 (ADSL2-LINE-MIB), SHDSL
MIB), VDSL (VDSL-LINE-MIB) and VDSL2 (VDSL2-LINE-MIB). (HDSL2-SHDSL-LINE-MIB), VDSL (VDSL-LINE-MIB), and VDSL2
(VDSL2-LINE-MIB).
4.1. Relationship to Interfaces Group MIB module 4.1. Relationship to Interfaces Group MIB Module
A bonded xDSL port is a stacked (a.k.a. aggregated or bonded) A bonded xDSL port is a stacked (a.k.a. aggregated or bonded)
interface and as such is managed using generic interface management interface and as such is managed using generic interface management
objects defined in the IF-MIB [RFC2863]. objects defined in the IF-MIB [RFC2863].
The stack management, i.e., actual connection of the sub-layers to The stack management, i.e., actual connection of the sub-layers to
the top layer interface, is done via the ifStackTable, as defined in the top layer interface, is done via the ifStackTable, as defined in
the IF-MIB [RFC2863] and its inverse ifInvStackTable, as defined in the IF-MIB [RFC2863] and its inverse -- the ifInvStackTable, as
the IF-INVERTED-STACK-MIB [RFC2864]. defined in the IF-INVERTED-STACK-MIB [RFC2864].
The ifCapStackTable and its inverse ifInvCapStackTable defined in the The ifCapStackTable and its inverse -- the ifInvCapStackTable, as
IF-CAP-STACK-MIB [RFC5066], extend the stack management with an defined in the IF-CAP-STACK-MIB [RFC5066] -- extend the stack
ability to describe possible connections or cross-connect capability, management with an ability to describe possible connections or cross-
when a flexible cross-connect matrix is present between the interface connect capability, when a flexible cross-connect matrix is present
layers. between the interface layers.
4.1.1. Layering Model 4.1.1. Layering Model
A G.Bond interface can aggregate up to 32 channel sub-layers, with A G.Bond interface can aggregate up to 32 channel sub-layers, with
each channel representing an xDSL line or an xDSL bearer channel. each channel representing an xDSL line or an xDSL bearer channel.
For the purpose of brevity we will refer to the bonded interface as For the purpose of brevity we will refer to the bonded interface as
Generic Bonded Sub-layer (GBS) and to the channel sub-layer as the Generic Bonding Sub-layer (GBS) and to the channel sub-layer as
Bonding Channel Entity (BCE). the Bonding Channel Entity (BCE).
A generic G.Bond device can have a number of GBS ports, each A generic G.Bond device can have a number of GBS ports, each
connected to a particular upper layer (e.g., Media Access Control connected to a particular upper layer (e.g., a Media Access Control
(MAC) interface for G.998.2 scheme), while simultaneously cross- (MAC) interface for the G.998.2 scheme), while simultaneously cross-
connected to a number of underlying BCEs, with a single GBS per BCE connected to a number of underlying BCEs, with a single-GBS-per-BCE
relationship. relationship.
A GBS port is represented in the Interface table (ifTable) as a A GBS port is represented in the Interfaces table (ifTable) as a
separate interface with an ifType reflecting a particular bonding separate interface with an ifType reflecting a particular bonding
scheme, e.g., g9981(263), g9982(264) or g9983(265). scheme, e.g., g9981(263), g9982(264), or g9983(265).
Each BCE in the aggregated GBS port is represented in the ifTable as Each BCE in the aggregated GBS port is represented in the ifTable as
a separate interface with an ifType relevant to a particular xDSL a separate interface with an ifType relevant to a particular xDSL
technology, e.g., shdsl(169) or vdsl(97). The ifType values are technology, e.g., shdsl(169) or vdsl(97). The ifType values are
defined in [IANAifType-MIB]. defined in [IANAifType-MIB].
The following figure shows the layering diagram and corresponding use The following figure shows the layering diagram and corresponding use
of ifTable for the bonded xDSL interfaces: of the ifTable for the bonded xDSL interfaces:
.-----------------------------. - .-----------------------------. -
| GBS | ^ 1 ifEntry | GBS | ^ 1 ifEntry
| (TPS-TC) | v ifType: g9981(263), g9982(264) | (TPS-TC) | v ifType: g9981(263), g9982(264),
+-----------------+---+-------+ - g9983(265), etc. +-----------------+---+-------+ - g9983(265), etc.
| TPS-TC \ | | | ^ | TPS-TC \ | | | ^
+---------\ | | | | N ifEntry (N=1..32) +---------\ | | | | N ifEntry (N=1..32)
| PMS-TC )BCE 1 |...| BCE N | ) ifType: adsl(94), shdsl(169), | PMS-TC )BCE 1 |...| BCE N | ) ifType: adsl(94), shdsl(169),
+---------/ | | | | vdsl(97), vdsl2(251), +---------/ | | | | vdsl(97), vdsl2(251),
| PMD / | | | v etc. | PMD / | | | v etc.
'-----------------+---+-------' - '-----------------+---+-------' -
BCE - Bonding Channel Entity BCE - Bonding Channel Entity
GBS - Generic Bonded Sub-layer GBS - Generic Bonding Sub-layer
PMD - Physical Medium Dependent PMD - Physical Medium Dependent
TPS-TC - Transport Protocol Specific - Transmission Convergence TPS-TC - Transport Protocol Specific - Transmission Convergence
PMS-TC - Physical Media Specific - Transmission Convergence PMS-TC - Physical Media Specific - Transmission Convergence
Figure 1: Use of ifTable for bonded xDSL interfaces Figure 1: Use of ifTable for Bonded xDSL Interfaces
The ifStackTable is indexed by the ifIndex values of the aggregated The ifStackTable is indexed by the ifIndex values of the aggregated
G.Bond port (GBS) and the BCEs connected to it. ifStackTable allows a G.Bond port (GBS) and the BCEs connected to it. The ifStackTable
Network Management application to determine which BCEs are connected allows a network management application to determine which BCEs are
to a particular GBS and change connections (if supported by the connected to a particular GBS and change connections (if supported by
application). The ifInvStackTable, being an inverted version of the the application). The ifInvStackTable, being an inverted version of
ifStackTable, provides an efficient means for a Network Management the ifStackTable, provides an efficient means for a network
application to read a subset of the ifStackTable and thereby management application to read a subset of the ifStackTable and
determine which GBS runs on top of a particular BCE. thereby determine which GBS runs on top of a particular BCE.
The ifCapStackTable defined in the IF-CAP-STACK-MIB module, specifies The ifCapStackTable, defined in the IF-CAP-STACK-MIB module,
for each higher-layer interface (e.g., GBS port) a list of lower- specifies for each higher-layer interface (e.g., GBS port) a list of
layer interfaces (e.g., BCEs), which can possibly be cross-connected lower-layer interfaces (e.g., BCEs), which can possibly be cross-
to that higher-layer interface, determined by the cross-connect connected to that higher-layer interface, determined by the cross-
capability of the device. This table, modeled after ifStackTable, is connect capability of the device. This table, modeled after the
read only, reflecting current cross-connect capability of a stacked ifStackTable, is read only, reflecting current cross-connect
interface, which can be dynamic in some implementations (e.g., if capability of a stacked interface, which can be dynamic in some
xDSL lines are located on a pluggable module and the module is pulled implementations (e.g., if xDSL lines are located on a pluggable
out). Note that BCE availability per GBS, described by module and the module is pulled out). Note that BCE availability per
ifCapStackTable, can be constrained by other parameters, for example GBS, described by the ifCapStackTable, can be constrained by other
by aggregation capacity of a GBS or by the BCE in question being parameters -- for example, by the aggregation capacity of a GBS or by
already connected to another GBS. So, in order to ensure that a the BCE in question being already connected to another GBS. So, in
particular BCE can be connected to the GBS, all respective parameters order to ensure that a particular BCE can be connected to the GBS,
(e.g., ifCapStackTable, ifStackTable and gBondPortCapCapacity) SHALL all respective parameters (e.g., ifCapStackTable, ifStackTable, and
be inspected. gBondPortCapCapacity) SHALL be inspected.
The ifInvCapStackTable, also defined in the IF-CAP-STACK-MIB module, The ifInvCapStackTable, also defined in the IF-CAP-STACK-MIB module,
describes which higher-layer interfaces (e.g., GBS ports) can describes which higher-layer interfaces (e.g., GBS ports) can
possibly be connected to a particular lower-layer interface (e.g., possibly be connected to a particular lower-layer interface (e.g.,
BCE), providing inverted mapping of ifCapStackTable. While it BCE), providing inverted mapping of the ifCapStackTable. While it
contains no additional information beyond that already contained in contains no additional information beyond that already contained in
the ifCapStackTable, the ifInvCapStackTable has the ifIndex values in the ifCapStackTable, the ifInvCapStackTable has the ifIndex values in
its INDEX clause in the reverse order, i.e., the lower-layer its INDEX clause in the reverse order, i.e., the lower-layer
interface first, and the higher-layer interface second, providing interface first, and the higher-layer interface second, providing
efficient means for a Network Management application to read a subset efficient means for a network management application to read a subset
of the ifCapStackTable and thereby determine which interfaces can be of the ifCapStackTable and thereby determine which interfaces can be
connected to run on top of a particular interface. connected to run on top of a particular interface.
4.1.2. xDSL Bonding 4.1.2. xDSL Bonding
The G.998.x Bonding allows a number of BCEs to be aggregated onto a The G.998.x Bonding allows a number of BCEs to be aggregated onto a
single logical GBS port, by splitting the incoming traffic into single logical GBS port by splitting the incoming traffic into
multiple streams, transmitting each stream over a specific BCE and multiple streams, transmitting each stream over a specific BCE, and
combining the streams at the remote GBS port, preserving the original combining the streams at the remote GBS port, preserving the original
traffic order. traffic order.
The Ethernet frames MAY be fragmented before the transmission and The Ethernet frames MAY be fragmented before the transmission and
reassembled at the remote end to minimize transportation delay. The reassembled at the remote end to minimize transportation delay. The
G.998.2 (G.Bond/Ethernet) ports with multiple BCEs MUST perform the G.998.2 (G.Bond/Ethernet) ports with multiple BCEs MUST perform the
fragmentation and reassembly of the Ethernet frames. However for a fragmentation and reassembly of the Ethernet frames. However, for
single-BCE G.998.2 ports this function MAY be omitted (a.k.a. bonding single-BCE G.998.2 ports this function MAY be omitted (a.k.a. bonding
bypass), to minimize fragmentation overhead and additional processing bypass), to minimize fragmentation overhead and additional processing
delay as well as to be able to interoperate with non-G.998 DSL delay as well as to be able to interoperate with non-G.998 DSL
equipment. equipment.
The agent is REQUIRED to indicate all supported bonding schemes (for The agent is REQUIRED to indicate all supported bonding schemes (for
example ATM, Ethernet and TDIM), including OPTIONAL support for the example, ATM, Ethernet, and TDIM), including OPTIONAL support for the
bonding bypass in G.998.2 single-BCE ports. bonding bypass in G.998.2 single-BCE ports.
The GBOND-MIB module allows a Network Management application to query The GBOND-MIB module allows a network management application to query
Bonding capability and enable/disable it if supported. Note that Bonding capability and enable/disable it if supported. Note that
enabling Bonding (by setting the value of gBondPortConfAdminScheme enabling Bonding (by setting the value of the
and gBondPortConfAdminScheme objects to any supported bonding scheme gBondPortConfAdminScheme and gBondPortConfPeerAdminScheme objects to
other than 'none') effectively turns on fragmentation and re-assembly any supported bonding scheme other than 'none') effectively turns on
function, even on a single-BCE port. the fragmentation and reassembly function, even on a single-BCE port.
4.1.3. Discovery Operation 4.1.3. Discovery Operation
The G.Bond ports may optionally support discovery operation, whereby The G.Bond ports may optionally support a discovery operation whereby
BCEs, during initialization, exchange information about their BCEs, during initialization, exchange information about their
respective aggregation groups (GBS), via [G.994.1] handshake (G.hs) respective aggregation groups (GBS), via the [G.994.1] handshake
protocol. This information can then be used to detect copper (G.hs) protocol. This information can then be used to detect copper
misconnections or for an automatic assignment of the local BCEs into misconnections or for an automatic assignment of the local BCEs into
aggregation groups instead of a fixed pre-configuration. aggregation groups instead of a fixed preconfiguration.
The MIB module defined in this document allow a Network Management The MIB module defined in this document allows a network management
application to control G.Bond discovery mechanism and query its application to control the G.Bond discovery mechanism and query its
results. results.
Two tables are used by the G.Bond discovery mechanism: ifStackTable Two tables are used by the G.Bond discovery mechanism: the
and ifCapStackTable. The following pseudo-code gives an example of ifStackTable and the ifCapStackTable. The following pseudocode gives
the discovery and automatic BCE assignment for a generic multi-GBS an example of the discovery and automatic BCE assignment for a
G.Bond device, located at Central Office (CO), using objects defined generic multi-GBS G.Bond device, located at the Central Office (CO),
in this MIB module, IF-CAP-STACK-MIB and IF-MIB modules [Note that using objects defined in this MIB module as well as the
automatic BCE assignment is only shown here for the purposes of the IF-CAP-STACK-MIB and IF-MIB modules [Note that automatic BCE
example. Fixed BCE pre-assignment, manual assignment or auto- assignment is only shown here for the purposes of the example. Fixed
assignment using an alternative internal algorithm may be chosen by a BCE pre-assignment, manual assignment, or auto-assignment using an
particular implementation]: alternative internal algorithm may be chosen by a particular
implementation]:
// Go over all GBS ports in the CO device // Go over all GBS ports in the CO device
FOREACH gbs[i] IN CO_device FOREACH gbs[i] IN CO_device
{ // Perform discovery and auto-assignment on GBS ports { // Perform discovery and auto-assignment on GBS ports
// with room for more Channels // with room for more channels.
IF ( gbs[i].NumBCEs < gbs[i].BondCapacity ) IF ( gbs[i].NumBCEs < gbs[i].BondCapacity )
{ // Assign a unique 6-octets local discovery code to the GBS { // Assign a unique 6-octet local discovery code to the GBS,
// e.g., MAC address of the associated port or some other // e.g., MAC address of the associated port or some other
// unique number specifically allocated for this purpose. // unique number specifically allocated for this purpose.
dc = gbs[i].DiscoveryCode = MAC[i]; dc = gbs[i].DiscoveryCode = MAC[i];
// Go over all disconnected Channels, which can // Go over all disconnected channels, which can
// potentially be connected to the GBS // potentially be connected to the GBS.
FOREACH bce[j] IN ifCapStackTable[gbs[i]] AND FOREACH bce[j] IN ifCapStackTable[gbs[i]] AND
NOT IN ifStackTable[gbs[i]] // not connected NOT IN ifStackTable[gbs[i]] // not connected
{ // Try to grab the remote RT_device, by writing the value { // Try to grab the Remote Terminal device (RT) by writing the
// of the local 6 Byte discovery code to the remote // value of the local 6-byte discovery code to the remote
// discovery code register (via handshake mechanism). // discovery code register (via a handshake mechanism).
// This operation is atomic Set-if-Clear action, i.e., it // This operation is an atomic Set-if-Clear action; i.e., it
// would succeed only if the remote discovery register was // would succeed only if the remote discovery register was
// zero. Read the remote discovery code register via Get // zero. Read the remote discovery code register via a Get
// operation to see if the RT_device, attached via the BCE // operation to see if the RT, attached via the BCE,
// is indeed marked as being the CO_device peer. // is indeed marked as being the CO_device peer.
bce[j].RemoteDiscoveryCode = dc; // Set-if-Clear bce[j].RemoteDiscoveryCode = dc; // Set-if-Clear
r = bce[j].RemoteDiscoveryCode; // Get r = bce[j].RemoteDiscoveryCode; // Get
IF ( r == dc AND gbs[i].NumBCEs < gbs[i].BondCapacity) IF ( r == dc AND gbs[i].NumBCEs < gbs[i].BondCapacity )
{ // Remote RT_device connected via BCE[j] is/was a peer { // RT connected via BCE[j] is/was a peer
// for GBS[i] and there room for another BCE in the // for GBS[i], and there is room for another BCE in the
// GBS[i] aggregation group (max. Bonding capacity is // GBS[i] aggregation group (max. Bonding capacity is
// not reached yet). // not reached yet).
// Connect this BCE to the GBS (via ifStackTable, // Connect this BCE to the GBS (via the ifStackTable; the
// ifInvStackTable being inverse of ifStackTable is // ifInvStackTable, which is the inverse of the ifStackTable,
// updated automatically, i.e., gbs[i] is auto-added // is updated automatically; i.e., gbs[i] is auto-added
// to ifInvStackTable[bce[j]]) // to ifInvStackTable[bce[j]]).
ADD bce[j] TO ifStackTable[gbs[i]]; ADD bce[j] TO ifStackTable[gbs[i]];
gbs[i].NumBCEs = gbs[i].NumBCEs + 1; gbs[i].NumBCEs = gbs[i].NumBCEs + 1;
// Discover all other disconnected BCEs, // Discover all other disconnected BCEs
// attached to the same RT_device and connect them to // attached to the same RT and connect them to
// the GBS provided there is enough room for more BCEs. // the GBS, provided there is enough room for more BCEs.
FOREACH bce[k] IN ifCapStackTable[gbs[i]] and FOREACH bce[k] IN ifCapStackTable[gbs[i]] and
NOT IN ifStackTable[gbs[i]] NOT IN ifStackTable[gbs[i]]
{ // Get Remote Discovery Code from the BCE to see if { // Get the remote discovery code from the BCE to see if
// it belongs to a connected RT_device "grabbed" by // it belongs to a connected RT "grabbed" by
// the CO_device. // the CO_device.
r = bce[k].RemoteDiscoveryCode; r = bce[k].RemoteDiscoveryCode;
IF ( r == dc AND gbs[i].NumBCEs < gbs[i].BondCapacity) IF ( r == dc AND gbs[i].NumBCEs < gbs[i].BondCapacity )
{ // Physically connect the BCE to the GBS { // Physically connect the BCE to the GBS.
// (gbs[i] is auto-added TO ifInvStackTable[bce[k]]) // (gbs[i] is auto-added TO ifInvStackTable[bce[k]]).
ADD bce[k] TO ifStackTable[gbs[i]]; ADD bce[k] TO ifStackTable[gbs[i]];
gbs[i].NumBCEs = gbs[i].NumBCEs + 1; gbs[i].NumBCEs = gbs[i].NumBCEs + 1;
} }
} }
} }
// At this point we have discovered all local BCEs which // At this point we have discovered all local BCEs that
// are physically connected to the same remote RT_device // are physically connected to the same RT and
// and connected them to GBS[i]. Go to the next GBS. // connected them to GBS[i]. Go to the next GBS.
BREAK; BREAK;
} }
} }
} }
An SNMP Agent for a G.Bond device builds ifCapStackTable and its An SNMP agent for a G.Bond device builds the ifCapStackTable and its
inverse ifInvCapStackTable on device initialization, according to the inverse -- the ifInvCapStackTable -- on device initialization,
cross-connect capabilities of the device. according to the cross-connect capabilities of the device.
Adding a BCE to the ifStackTable row for a specific GBS, involves Adding a BCE to the ifStackTable row for a specific GBS involves
actual connection of the BCE to the GBS. actual connection of the BCE to the GBS.
Note that GBS port does not have to be operationally 'down' for the Note that a GBS port does not have to be operationally 'down' for the
connection to succeed. In fact, a dynamic BCE addition (and removal) connection to succeed. In fact, a dynamic BCE addition (and removal)
MAY be implemented with an available BCE being initialized first (by MAY be implemented with an available BCE being initialized first (by
setting its ifAdminStatus to 'up') and then added to an operationally setting its ifAdminStatus to 'up') and then added to an operationally
'up' GBS port, by modifying a respective ifStackTable (and respective 'up' GBS port, by modifying a respective ifStackTable (and respective
ifInvStackTable) entry. ifInvStackTable) entry.
It is RECOMMENDED that a removal of the last operationally 'up' BCE It is RECOMMENDED that removal of the last operationally 'up' BCE
from an operationally 'up' GBS, i.e. modification of a respective from an operationally 'up' GBS, i.e., modification of a respective
entry in ifStackTable and a corresponding entry in ifInvStackTable, entry in the ifStackTable, and a corresponding entry in the
would be rejected by the implementation (in case of SNMP with the ifInvStackTable, would be rejected by the implementation (in the case
error inconsistentValue), as this action would completely drop the of SNMP, with the error inconsistentValue), as this action would
link. completely drop the link.
In addition to the standard handshake-based discovery described In addition to the standard handshake-based discovery described
above, [G.998.2] defines an optional frame-based discovery and pair above, [G.998.2] defines an optional frame-based discovery and pair
management. These frame-based methods are discussed in management. These frame-based methods are discussed in [RFC6767].
[I-D.ietf-adslmib-gbond-eth-mib].
4.1.4. G.Bond ports initialization 4.1.4. Initialization of G.Bond Ports
G.Bond ports being built on top of xDSL technology, require a lengthy G.Bond ports built on top of xDSL technology require a lengthy
initialization or 'training' process, before any data can pass. initialization or 'training' process before any data can pass.
During this initialization both ends of a link (peers) work During this initialization, both ends of a link (peers) work
cooperatively to achieve required data rate on a particular copper cooperatively to achieve a required data rate on a particular copper
pair. Sometimes, when the copper line is too long or the noise on pair. Sometimes, when the copper line is too long or the noise on
the line is too high, that 'training' process may fail to achieve a the line is too high, that 'training' process may fail to achieve a
specific target rate with required characteristics. specific target rate with required characteristics.
The ifAdminStatus object from the IF-MIB, controls the desired state The ifAdminStatus object from the IF-MIB controls the desired state
of a GBS with all the BCEs connected to it or of an individual BCE of a GBS with all the BCEs connected to it or of an individual BCE
port. Setting this object to 'up' instructs a particular GBS or a port. Setting this object to 'up' instructs a particular GBS or a
BCE to start initialization process, which may take tens of seconds BCE to start the initialization process, which may take tens of
for G.Bond ports. The ifOperStatus object from the IF-MIB shows the seconds for G.Bond ports. The ifOperStatus object from the IF-MIB
operational state of an interface for GBS, extended by shows the operational state of an interface for the GBS, extended by
gBondPortStatFltStatus object defined in this document, and the gBondPortStatFltStatus object defined in this document, and a
corresponding *Status object from a relevant xDSL line MIB for BCE corresponding *Status object from a relevant xDSL line MIB for BCE
interfaces. interfaces.
A disconnected BCE may be initialized by changing the ifAdminState A disconnected BCE may be initialized by changing the ifAdminStatus
from 'down' to 'up'. Changing the ifAdminState to 'up' on the GBS from 'down' to 'up'. Changing the ifAdminStatus to 'up' on the GBS
initializes all BCEs connected to that particular GBS. Note that in initializes all BCEs connected to that particular GBS. Note that in
case of bonding some interfaces may fail to initialize while others the case of bonding, some interfaces may fail to initialize while
succeed. The GBS is considered operationally 'up' if at least one others succeed. The GBS is considered operationally 'up' if at least
bonded BCE is operationally 'up'. When all BCEs connected to the GBS one bonded BCE is operationally 'up'. When all BCEs connected to the
are 'down' the GBS SHALL be considered operationally GBS are 'down', the GBS SHALL be considered operationally
'lowerLayerDown'. The GBS SHALL be considered operationally 'lowerLayerDown'. The GBS SHALL be considered operationally
'notPresent' if it is not connected to any BCE. The GBS/BCE 'notPresent' if it is not connected to any BCE. The GBS/BCE
interface SHALL remain operationally 'down' during initialization, interface SHALL remain operationally 'down' during initialization,
indicated by 'init' value of the gBondPortStatFltStatus object. indicated by the 'init' value of the gBondPortStatFltStatus object.
4.1.5. Usage of ifTable 4.1.5. Usage of the ifTable
Both BCE and GBS interfaces are managed using interface specific Both BCE and GBS interfaces are managed using interface-specific
management objects defined in the GBOND-MIB module and generic management objects defined in the GBOND-MIB module and generic
interface objects from the ifTable of IF-MIB, with all management interface objects from the ifTable of the IF-MIB, with all management
table entries referenced by the interface index ifIndex. table entries referenced by the interface index ifIndex.
The following table summarizes G.Bond specific interpretations for The following table summarizes G.Bond-specific interpretations for
some of the ifTable objects specified by the mandatory some of the ifTable objects specified by the mandatory
ifGeneralInformationGroup: ifGeneralInformationGroup:
+---------------+---------------------------------------------------+ +---------------+---------------------------------------------------+
| IF-MIB object | G.Bond interpretation | | IF-MIB Object | G.Bond Interpretation |
+---------------+---------------------------------------------------+ +---------------+---------------------------------------------------+
| ifIndex | Interface index. Note that each BCE and each GBS | | ifIndex | Interface index. Note that each BCE and each GBS |
| | in the G.Bond PHY MUST have a unique index, as | | | in the G.Bond PHY MUST have a unique index, as |
| | there are some GBS and BCE specific attributes | | | there are some GBS- and BCE-specific attributes |
| | accessible only on the GBS or BCE level. | | | accessible only on the GBS or BCE level. |
+---------------+---------------------------------------------------+ +---------------+---------------------------------------------------+
| ifType | g9981(263), g9982(264) or g9983(265) for the ATM, | | ifType | g9981(263), g9982(264), or g9983(265) for the |
| | Ethernet or TDIM GBS respectively, shdsl(169) for | | | ATM, Ethernet, or TDIM GBS, respectively; |
| | G.SHDSL BCE, vdsl(97) for VDSL BCE, etc. | | | shdsl(169) for the G.SHDSL BCE, vdsl(97) for the |
| | VDSL BCE, etc. |
+---------------+---------------------------------------------------+ +---------------+---------------------------------------------------+
| ifSpeed | Operating data rate for the BCE. For the GBS it | | ifSpeed | Operating data rate for the BCE. For the GBS, it |
| | is the sum of the current operating data rates of | | | is the sum of the current operating data rates of |
| | all BCEs in the aggregation group, without the | | | all BCEs in the aggregation group, without the |
| | encapsulation overhead and G.Bond overhead, but | | | encapsulation overhead and G.Bond overhead, but |
| | accounting for the Inter-Frame Gaps (IFG). When a | | | accounting for Inter-Frame Gaps (IFG). When a |
| | GBS or a BCE is operating in an asymetrical | | | GBS or a BCE is operating in an asymmetrical |
| | fashion (upstream data rate differs from the | | | fashion (the upstream data rate differs from the |
| | downstream one) the lowest of the values is | | | downstream one), the lowest of the values is |
| | shown. | | | shown. |
+---------------+---------------------------------------------------+ +---------------+---------------------------------------------------+
| ifAdminStatus | Setting this object to 'up' instructs a | | ifAdminStatus | Setting this object to 'up' instructs a |
| | particular GBS (with all BCEs connected to it) or | | | particular GBS (with all BCEs connected to it) or |
| | a BCE to start initialization process | | | a BCE to start the initialization process. |
+---------------+---------------------------------------------------+ +---------------+---------------------------------------------------+
| ifOperStatus | A relevant *Status object from a particular line | | ifOperStatus | A relevant *Status object from a particular line |
| | MIB supplements the value of ifOperStatus for | | | MIB supplements the value of ifOperStatus for |
| | BCEs. gBondPortStatFltStatus supplements the | | | BCEs. gBondPortStatFltStatus supplements the |
| | value of ifOperStatus for GBS. Note that both | | | value of ifOperStatus for a GBS. Note that both |
| | relevant objects shall be inspected to determine | | | relevant objects shall be inspected to determine |
| | the real operational status of a BCE/GBS port, | | | the real operational status of a BCE/GBS port, |
| | e.g. a GBS port may be operationally 'up' with | | | e.g., a GBS port may be operationally 'up' with |
| | gBondPortStatFltStatus indicating lowRate(4) | | | gBondPortStatFltStatus indicating lowRate(4) |
| | fault condition, or 'down' with no gBond faults. | | | fault condition, or 'down' with no gBond faults. |
+---------------+---------------------------------------------------+ +---------------+---------------------------------------------------+
Table 1: G.Bond interpretation of IF-MIB objects Table 1: G.Bond Interpretation of IF-MIB Objects
4.2. Relationship to G.Bond ATM, ETH and TDIM MIB modules 4.2. Relationship to G.Bond ATM, ETH, and TDIM MIB Modules
The MIB module defined in this document is common to all G.998 The MIB module defined in this document is common to all G.998
bonding schemes. It MUST be used in conjunction with a bonding bonding schemes. It MUST be used in conjunction with a bonding
scheme-specific MIB module: scheme-specific MIB module:
o G9981-MIB [I-D.ietf-adslmib-gbond-atm-mib] for a G.998.1 bonded o G9981-MIB [RFC6768] for a G.998.1 bonded interface.
interface.
o G9982-MIB [I-D.ietf-adslmib-gbond-eth-mib] for a G.998.2 bonded o G9982-MIB [RFC6767] for a G.998.2 bonded interface.
interface.
o G9983-MIB [I-D.ietf-adslmib-gbond-tdim-mib] for a G.998.3 bonded o G9983-MIB [RFC6766] for a G.998.3 bonded interface.
interface.
4.3. Relationship to xDSL MIB modules 4.3. Relationship to xDSL MIB Modules
Each xDSL technology is described in a relevant xDSL line MIB module: Each xDSL technology is described in a relevant xDSL line MIB module:
e.g., HDSL2-SHDSL-LINE-MIB [RFC4319] for G.SHDSL, ADSL-LINE-EXT-MIB e.g., the HDSL2-SHDSL-LINE-MIB [RFC4319] for G.SHDSL,
[RFC3440] for ADSL, ADSL2-LINE-MIB [RFC4706] for ADSL2, VDSL-LINE-MIB ADSL-LINE-EXT-MIB [RFC3440] for ADSL, ADSL2-LINE-MIB [RFC4706] for
[RFC3728] for VDSL or VDSL2-LINE-MIB [RFC5650] for VDSL2. ADSL2, VDSL-LINE-MIB [RFC3728] for VDSL, or VDSL2-LINE-MIB [RFC5650]
for VDSL2.
These MIB moduless are used to manage individual xDSL lines/channels These MIB modules are used to manage individual xDSL lines/channels
(BCEs). (BCEs).
4.4. Addition of new bonding schemes 4.4. Addition of New Bonding Schemes
In case a new bonding scheme is introduced in a revision of G.998, In case a new bonding scheme is introduced in a revision of G.998,
IANA can update the IANA-maintained MIB module, adding the IANA can update the IANA-maintained MIB module, adding the
corresponding new value, to the IANAgBondScheme and corresponding new value to the IANAgBondScheme and
IANAgBondSchemeList textual conventions, as well as listing the new IANAgBondSchemeList textual conventions, as well as listing the new
scheme-specific MIB module's name (e.g. G998x-MIB). scheme-specific MIB module's name (e.g., G998x-MIB).
Any scheme-specific aspect of an existing GBOND-MIB object SHALL be Any scheme-specific aspect of an existing GBOND-MIB object SHALL be
described in the corresponding G998x-MIB module, to prevent an described in the corresponding G998x-MIB module, to prevent an
unnesessary re-issue of the GBOND-MIB module. For example, an exact unnecessary reissue of the GBOND-MIB module. For example, an exact
definition of an Errored Second (ES) or a Severely Errored Second definition of an Errored Second (ES) or a Severely Errored Second
(SES) can be bonding-scheme specific, see the definition for (SES) can be bonding-scheme specific; see the definitions for the
gBondPortPmCurES and gBondPortPmCurSES objects. gBondPortPmCurES and gBondPortPmCurSES objects.
5. MIB Structure 5. MIB Structure
5.1. Overview 5.1. Overview
The main management objects defined in the GBOND-MIB module are split The main management objects defined in the GBOND-MIB module are split
into 2 groups, structured as recommended by RFC 4181 [RFC4181]: into 2 groups, structured as recommended by RFC 4181 [RFC4181]:
o gBondPort - containing objects for configuration, capabilities, o gBondPort - containing objects for configuration, capabilities,
status, historical performance monitoring and notifications, status, historical Performance Monitoring, and notifications,
common to all G.Bond ports (GBS). common to all G.Bond ports (GBS).
o gBondBce - containing a single common object for configuration of o gBondBce - containing a single common object for configuration of
the remote discovery code per BCE. Note that the rest of the the remote discovery code per BCE. Note that the rest of the
objects for BCE configuration, capabilities, status and objects for BCE configuration, capabilities, status, and
notifications, is located in relevant xDSL line MIB modules as notifications are located in relevant xDSL line MIB modules as
well as in the bonding scheme specific MIB modules. well as in the bonding scheme-specific MIB modules.
5.2. Performance Monitoring 5.2. Performance Monitoring
The OPTIONAL performance monitoring counters, thresholds and history The OPTIONAL Performance Monitoring counters, thresholds, and history
buckets (interval-counters) defined in [TR-159] are implemented using buckets (interval-counters) defined in [TR-159] are implemented using
the textual conventions defined in the HC-PerfHist-TC-MIB [RFC3705]. the textual conventions defined in the HC-PerfHist-TC-MIB [RFC3705].
The HC-PerfHist-TC-MIB defines 64-bit versions of the textual The HC-PerfHist-TC-MIB defines 64-bit versions of the textual
conventions found in PerfHist-TC-MIB [RFC3593]. conventions found in the PerfHist-TC-MIB [RFC3593].
The agent SHOULD align the beginning of each interval to a fifteen The agent SHOULD align the beginning of each interval to a fifteen-
minute boundary of a wall clock. Likewise, the beginning of each one minute boundary of a wall clock. Likewise, the beginning of each
day intervals SHOULD be aligned with the start of a day. one-day interval SHOULD be aligned with the start of a day.
The rationale behind it is to simplify collection and analysis of the The rationale behind this is to simplify collection and analysis of
PM from multiple agents by a network management system (NMS) - each Performance Monitoring (PM) from multiple agents by a network
PM interval can be "time-stamped" using the gBond*IntervalIndex management system (NMS) -- each PM interval can be "time-stamped"
object, the fact that 1-day interval starts at 00:00 and 15-min using the gBond*IntervalIndex object, from the fact that the 1-day
intervals are aligned with 1/4 hour and the network-wide "wall interval starts at 00:00 and the 15-minute intervals are aligned with
clock", typically distributed via NTP or SNTP [RFC5905]. If the each 1/4 hour and the network-wide "wall clock", typically
agent does not have an access to the wall clock, a local clock can be distributed via NTP or the Simple Network Time Protocol (SNTP)
used. In this case, as well as when coping with multiple time zones, [RFC5905]. If the agent does not have access to the wall clock, a
the NMS would have to correlate for the difference between the local clock can be used. In this case, as well as when coping with
agent's local clock (available for example via hrSystemDate object multiple time zones, the NMS would have to correlate the difference
from HOST-RESOURCES-MIB [RFC2790]) and the wall clock. between the agent's local clock (available, for example, via the
hrSystemDate object from the HOST-RESOURCES-MIB [RFC2790]) and the
wall clock.
Counters are not reset when a GBS is reinitialized, but rather only Counters are not reset when a GBS is re-initialized, but rather only
when the agent is reset or reinitialized. when the agent is reset or re-initialized.
Note that the accumulation of certain performance events for a Note that the accumulation of certain performance events for a
monitored entity is inhibited (counting stops) during periods of monitored entity is inhibited (counting stops) during periods of
service unavailability on that monitored entity. The DESCRIPTION service unavailability on that monitored entity. The DESCRIPTION
clause of performance monitoring counters in this MIB module clause of Performance Monitoring counters in this MIB module
specifies which of the counters are inhibited during periods of specifies which of the counters are inhibited during periods of
service unavailability. service unavailability.
5.3. Mapping of DSL Forum TR-159 Managed Objects 5.3. Mapping of Broadband Forum TR-159 Managed Objects
This section contains the mapping between relevant managed objects This section contains the mapping between relevant managed objects
(attributes) defined in [TR-159] and managed objects defined in this (attributes) defined in [TR-159] and managed objects defined in this
document and in associated MIB modules, i.e., the IF-MIB [RFC2863]. document and in associated MIB modules, i.e., the IF-MIB [RFC2863].
+-------------------------------+-----------------------------------+ +--------------------------------+------------------------------------+
| G.Bond Managed Object | Corresponding SNMP Object | | G.Bond Managed Object | Corresponding SNMP Object |
+-------------------------------+-----------------------------------+ +--------------------------------+------------------------------------+
| oBondingGroup - Basic Package | | | oBondingGroup - Basic Package | |
| (Mandatory) | | | (Mandatory) | |
+-------------------------------+-----------------------------------+ +--------------------------------+------------------------------------+
| aGroupID | ifIndex (IF-MIB) | | aGroupID | ifIndex (IF-MIB) |
+-------------------------------+-----------------------------------+ +--------------------------------+------------------------------------+
+-------------------------------+-----------------------------------+ | aGroupBondSchemesSupported | gBondPortCapSchemesSupported |
| aGroupBondSchemesSupported | gBondPortCapSchemesSupported | +--------------------------------+------------------------------------+
+-------------------------------+-----------------------------------+ | aGroupPeerBondSchemesSupported | gBondPortCapPeerSchemesSupported |
| aGroupPeerBondSchemesSupporte | gBondPortCapPeerSchemesSupported | +--------------------------------+------------------------------------+
| d | | | aGroupAdminBondScheme | gBondPortConfAdminScheme |
+-------------------------------+-----------------------------------+ +--------------------------------+------------------------------------+
| aGroupAdminBondScheme | gBondPortConfAdminScheme | | aGroupPeerAdminBondScheme | gBondPortConfPeerAdminScheme |
+-------------------------------+-----------------------------------+ +--------------------------------+------------------------------------+
| aGroupPeerAdminBondScheme | gBondPortConfPeerAdminScheme | | aGroupOperBondScheme | gBondPortStatOperScheme |
+-------------------------------+-----------------------------------+ +--------------------------------+------------------------------------+
| aGroupOperBondScheme | gBondPortStatOperScheme | | aGroupPeerOperBondScheme | gBondPortStatPeerOperScheme |
+-------------------------------+-----------------------------------+ +--------------------------------+------------------------------------+
| aGroupPeerOperBondScheme | gBondPortStatPeerOperScheme | | aGroupEnd | gBondPortStatSide |
+-------------------------------+-----------------------------------+ +--------------------------------+------------------------------------+
| aGroupEnd | gBondPortStatSide | | aGroupOperState | ifOperStatus (IF-MIB) |
+-------------------------------+-----------------------------------+ +--------------------------------+------------------------------------+
| aGroupOperState | ifOperStatus (IF-MIB) | | aGroupAdminState | ifAdminStatus (IF-MIB) |
+-------------------------------+-----------------------------------+ +--------------------------------+------------------------------------+
| aGroupAdminState | ifAdminStatus (IF-MIB) | | aGroupStatus | gBondPortStatFltStatus |
+-------------------------------+-----------------------------------+ +--------------------------------+------------------------------------+
| aGroupStatus | gBondPortStatFltStatus | | aGroupCapacity | gBondPortCapCapacity |
+-------------------------------+-----------------------------------+ +--------------------------------+------------------------------------+
| aGroupCapacity | gBondPortCapCapacity | | aGroupPeerCapacity | gBondPortCapPeerCapacity |
+-------------------------------+-----------------------------------+ +--------------------------------+------------------------------------+
| aGroupPeerCapacity | gBondPortCapPeerCapacity | | aGroupNumChannels | gBondPortStatNumBCEs |
+-------------------------------+-----------------------------------+ +--------------------------------+------------------------------------+
| aGroupNumChannels | gBondPortStatNumBCEs | | aGroupName | ifName (IF-MIB) |
+-------------------------------+-----------------------------------+ +--------------------------------+------------------------------------+
| aGroupName | ifName (IF-MIB) | | aGroupDiscoveryCode | gBondPortConfDiscoveryCode |
+-------------------------------+-----------------------------------+ +--------------------------------+------------------------------------+
| aGroupDiscoveryCode | gBondPortConfDiscoveryCode | | aGroupUpRate | gBondPortStatUpDataRate |
+-------------------------------+-----------------------------------+ +--------------------------------+------------------------------------+
| aGroupUpRate | gBondPortStatUpDataRate | | aGroupDownRate | gBondPortStatDnDataRate |
+-------------------------------+-----------------------------------+ +--------------------------------+------------------------------------+
| aGroupDownRate | gBondPortStatDnDataRate | | aGroupTargetUpRate | gBondPortConfTargetUpDataRate |
+-------------------------------+-----------------------------------+ +--------------------------------+------------------------------------+
| aGroupTargetUpRate | gBondPortConfTargetUpDataRate | | aGroupTargetDownRate | gBondPortConfTargetDnDataRate |
+-------------------------------+-----------------------------------+ +--------------------------------+------------------------------------+
| aGroupTargetDownRate | gBondPortConfTargetDnDataRate | | aGroupThreshLowUpRate | gBondPortConfThreshLowUpRate |
+-------------------------------+-----------------------------------+ +--------------------------------+------------------------------------+
| aGroupThreshLowUpRate | gBondPortConfThreshLowUpRate | +--------------------------------+------------------------------------+
+-------------------------------+-----------------------------------+ | aGroupThreshLowDownRate | gBondPortConfThreshLowDnRate |
| aGroupThreshLowDownRate | gBondPortConfThreshLowDnRate | +--------------------------------+------------------------------------+
+-------------------------------+-----------------------------------+ | aGroupLowRateCrossingEnable | gBondPortConfLowRateCrossingEnable |
| aGroupLowRateCrossingEnable | gBondPortConfLowRateCrossingEnabl | +--------------------------------+------------------------------------+
| | e | | nGroupLowUpRateCrossing | gBondLowUpRateCrossing |
+-------------------------------+-----------------------------------+ +--------------------------------+------------------------------------+
| nGroupLowUpRateCrossing | gBondLowUpRateCrossing | | nGroupLowDownRateCrossing | gBondLowDnRateCrossing |
| nGroupLowDownRateCrossing | gBondLowDnRateCrossing | +--------------------------------+------------------------------------+
+-------------------------------+-----------------------------------+ | aGroupLinkUpDownEnable | ifLinkUpDownTrapEnable (IF-MIB) |
| aGroupLinkUpDownEnable | ifLinkUpDownTrapEnable (IF-MIB) | +--------------------------------+------------------------------------+
+-------------------------------+-----------------------------------+ | nGroupLinkUp | linkUp (IF-MIB) |
| nGroupLinkUp | linkDown (IF-MIB) | +--------------------------------+------------------------------------+
+-------------------------------+-----------------------------------+ | nGroupLinkDown | linkDown (IF-MIB) |
| nGroupLinkDown | linkUp (IF-MIB) | +--------------------------------+------------------------------------+
+-------------------------------+-----------------------------------+ | oBondingGroup - PM Package | |
| oBondingGroup - PM Package | | | (Optional) | |
| (Optional) | | +--------------------------------+------------------------------------+
+-------------------------------+-----------------------------------+ | aGroupPerfES | gBondPortPmCurES |
| aGroupPerfES | gBondPortPmCurES | +--------------------------------+------------------------------------+
+-------------------------------+-----------------------------------+ | aGroupPerfSES | gBondPortPmCurSES |
| aGroupPerfSES | gBondPortPmCurSES | +--------------------------------+------------------------------------+
+-------------------------------+-----------------------------------+ | aGroupPerfUAS | gBondPortPmCurUAS |
| aGroupPerfUAS | gBondPortPmCurUAS | +--------------------------------+------------------------------------+
+-------------------------------+-----------------------------------+ | aGroupPerf15MinValidIntervals | gBondPortPmCur15MinValidIntervals |
| aGroupPerf15MinValidIntervals | gBondPortPmCur15MinValidIntervals | +--------------------------------+------------------------------------+
+-------------------------------+-----------------------------------+ | aGroupPerf15MinInvalidIntervals| gBondPortPmCur15MinInvalidIntervals|
| aGroupPerf15MinInvalidInterva | gBondPortPmCur15MinInvalidInterva | +--------------------------------+------------------------------------+
| ls | ls | | aGroupPerfCurr15MinTimeElapsed | gBondPortPmCur15MinTimeElapsed |
+-------------------------------+-----------------------------------+ +--------------------------------+------------------------------------+
| aGroupPerfCurr15MinTimeElapse | gBondPortPmCur15MinTimeElapsed | | aGroupPerfCurr15MinES | gBondPortPmCur15MinES |
| d | | +--------------------------------+------------------------------------+
+-------------------------------+-----------------------------------+ | aGroupPerfCurr15MinSES | gBondPortPmCur15MinSES |
| aGroupPerfCurr15MinES | gBondPortPmCur15MinES | +--------------------------------+------------------------------------+
+-------------------------------+-----------------------------------+ | aGroupPerfCurr15MinUAS | gBondPortPmCur15MinUAS |
| aGroupPerfCurr15MinSES | gBondPortPmCur15MinSES | +--------------------------------+------------------------------------+
+-------------------------------+-----------------------------------+ | aGroupPerfTcaEnable | gBondPortConfPmTcaEnable |
| aGroupPerfCurr15MinUAS | gBondPortPmCur15MinUAS | +--------------------------------+------------------------------------+
+-------------------------------+-----------------------------------+ | aGroupPerfThreshold15MinES | gBondPortPmTcaProfileThresh15MinES |
| aGroupPerfTcaEnable | gBondPortConfPmTcaEnable | +--------------------------------+------------------------------------+
+-------------------------------+-----------------------------------+ | aGroupPerfThreshold15MinSES | gBondPortPmTcaProfileThresh15MinSES|
| aGroupPerfThreshold15MinES | gBondPortPmTcaProfileThresh15MinE | +--------------------------------+------------------------------------+
| | S | | aGroupPerfThreshold15MinUAS | gBondPortPmTcaProfileThresh15MinUAS|
+-------------------------------+-----------------------------------+ +--------------------------------+------------------------------------+
| aGroupPerfThreshold15MinSES | gBondPortPmTcaProfileThresh15MinS | | nGroupPerfTca15MinES | gBondPmTca15MinESCrossing |
| | ES | +--------------------------------+------------------------------------+
+-------------------------------+-----------------------------------+ | nGroupPerfTca15MinSES | gBondPmTca15MinSESCrossing |
| aGroupPerfThreshold15MinUAS | gBondPortPmTcaProfileThresh15MinU | +--------------------------------+------------------------------------+
| | AS | +--------------------------------+------------------------------------+
+-------------------------------+-----------------------------------+ | nGroupPerfTca15MinUAS | gBondPmTca15MinUASCrossing |
| nGroupPerfTca15MinES | gBondPmTca15MinESCrossing | +--------------------------------+------------------------------------+
+-------------------------------+-----------------------------------+ | aGroupPerf1DayValidIntervals | gBondPortPmCur1DayValidIntervals |
| nGroupPerfTca15MinSES | gBondPmTca15MinSESCrossing | +--------------------------------+------------------------------------+
+-------------------------------+-----------------------------------+ | aGroupPerf1DayInvalidIntervals | gBondPortPmCur1DayInvalidIntervals |
| nGroupPerfTca15MinUAS | gBondPmTca15MinUASCrossing | +--------------------------------+------------------------------------+
+-------------------------------+-----------------------------------+ | aGroupPerfCurr1DayTimeElapsed | gBondPortPmCur1DayTimeElapsed |
+-------------------------------+-----------------------------------+ +--------------------------------+------------------------------------+
| aGroupPerf1DayValidIntervals | gBondPortPmCur1DayValidIntervals | | aGroupPerfCurr1DayES | gBondPortPmCur1DayIntervalES |
+-------------------------------+-----------------------------------+ +--------------------------------+------------------------------------+
| aGroupPerf1DayInvalidInterval | gBondPortPmCur1DayInvalidInterval | | aGroupPerfCurr1DaySES | gBondPortPmCur1DayIntervalSES |
| s | s | +--------------------------------+------------------------------------+
+-------------------------------+-----------------------------------+ | aGroupPerfCurr1DayUAS | gBondPortPmCur1DayIntervalUAS |
| aGroupPerfCurr1DayTimeElapsed | gBondPortPmCur1DayTimeElapsed | +--------------------------------+------------------------------------+
+-------------------------------+-----------------------------------+ | aGroupPerfThreshold1DayES | gBondPortPmTcaProfileThresh1DayES |
| aGroupPerfCurr1DayES | gBondPortPmCur1DayIntervalES | +--------------------------------+------------------------------------+
+-------------------------------+-----------------------------------+ | aGroupPerfThreshold1DaySES | gBondPortPmTcaProfileThresh1DaySES |
| aGroupPerfCurr1DaySES | gBondPortPmCur1DayIntervalSES | +--------------------------------+------------------------------------+
+-------------------------------+-----------------------------------+ | aGroupPerfThreshold1DayUAS | gBondPortPmTcaProfileThresh1DayUAS |
| aGroupPerfCurr1DayUAS | gBondPortPmCur1DayIntervalUAS | +--------------------------------+------------------------------------+
+-------------------------------+-----------------------------------+ | nGroupPerfTca1DayES | gBondPmTca1DayESCrossing |
| aGroupPerfThreshold1DayES | gBondPortPmTcaProfileThresh1DayES | +--------------------------------+------------------------------------+
+-------------------------------+-----------------------------------+ | nGroupPerfTca1DaySES | gBondPmTca1DaySESCrossing |
| aGroupPerfThreshold1DaySES | gBondPortPmTcaProfileThresh1DaySE | +--------------------------------+------------------------------------+
| | S | | nGroupPerfTca1DayUAS | gBondPmTca1DayUASCrossing |
+-------------------------------+-----------------------------------+ +--------------------------------+------------------------------------+
| aGroupPerfThreshold1DayUAS | gBondPortPmTcaProfileThresh1DayUA | | aGroupPerf15MinIntervalNumber | gBondPortPm15MinIntervalIndex |
| | S | +--------------------------------+------------------------------------+
+-------------------------------+-----------------------------------+ | aGroupPerf15MinIntervalValid | gBondPortPm15MinIntervalValid |
| nGroupPerfTca1DayES | gBondPmTca1DayESCrossing | +--------------------------------+------------------------------------+
+-------------------------------+-----------------------------------+ | aGroupPerf15MinIntervalES | gBondPortPm15MinIntervalES |
| nGroupPerfTca1DaySES | gBondPmTca1DaySESCrossing | +--------------------------------+------------------------------------+
+-------------------------------+-----------------------------------+ | aGroupPerf15MinIntervalSES | gBondPortPm15MinIntervalSES |
| nGroupPerfTca1DayUAS | gBondPmTca1DayUASCrossing | +--------------------------------+------------------------------------+
+-------------------------------+-----------------------------------+ | aGroupPerf15MinIntervalUAS | gBondPortPm15MinIntervalUAS |
| aGroupPerf15MinIntervalNumber | gBondPortPm15MinIntervalIndex | +--------------------------------+------------------------------------+
+-------------------------------+-----------------------------------+ | aGroupPerf1DayIntervalNumber | gBondPortPm1DayIntervalIndex |
| aGroupPerf15MinIntervalValid | gBondPortPm15MinIntervalValid | +--------------------------------+------------------------------------+
+-------------------------------+-----------------------------------+ | aGroupPerf1DayIntervalValid | gBondPortPm1DayIntervalValid |
| aGroupPerf15MinIntervalES | gBondPortPm15MinIntervalES | +--------------------------------+------------------------------------+
+-------------------------------+-----------------------------------+ | aGroupPerf1DayIntervalMoniSecs | gBondPortPm1DayIntervalMoniTime |
| aGroupPerf15MinIntervalSES | gBondPortPm15MinIntervalSES | +--------------------------------+------------------------------------+
+-------------------------------+-----------------------------------+ | aGroupPerf1DayIntervalES | gBondPortPm1DayIntervalES |
| aGroupPerf15MinIntervalUAS | gBondPortPm15MinIntervalUAS | +--------------------------------+------------------------------------+
+-------------------------------+-----------------------------------+ | aGroupPerf1DayIntervalSES | gBondPortPm1DayIntervalSES |
| aGroupPerf1DayIntervalNumber | gBondPortPm1DayIntervalIndex | +--------------------------------+------------------------------------+
+-------------------------------+-----------------------------------+ +--------------------------------+------------------------------------+
| aGroupPerf1DayIntervalValid | gBondPortPm1DayIntervalValid | | aGroupPerf1DayIntervalUAS | gBondPortPm1DayIntervalUAS |
+-------------------------------+-----------------------------------+ +--------------------------------+------------------------------------+
| aGroupPerf1DayIntervalMoniSec | gBondPortPm1DayIntervalMoniTime | | oLine - Basic Package | |
| s | | | (Mandatory) | |
+-------------------------------+-----------------------------------+ +--------------------------------+------------------------------------+
| aGroupPerf1DayIntervalES | gBondPortPm1DayIntervalES | | aLineID | ifIndex (IF-MIB) |
+-------------------------------+-----------------------------------+ +--------------------------------+------------------------------------+
| aGroupPerf1DayIntervalSES | gBondPortPm1DayIntervalSES | | aLineType | ifType (IF-MIB) |
| aGroupPerf1DayIntervalUAS | gBondPortPm1DayIntervalUAS | +--------------------------------+------------------------------------+
+-------------------------------+-----------------------------------+ | aLineOperState | ifOperStatus (IF-MIB) |
| oLine - Basic Package | | +--------------------------------+------------------------------------+
| (Mandatory) | | | aLineStatus | *dsl*CurrStatus (*DSL-LINE-MIB) |
+-------------------------------+-----------------------------------+ +--------------------------------+------------------------------------+
| aLineID | ifIndex (IF-MIB) | | aLineEnd | *dsl*Side (*DSL-LINE-MIB) |
+-------------------------------+-----------------------------------+ +--------------------------------+------------------------------------+
| aLineType | ifType (IF-MIB) | | aLineAdminState | ifAdminStatus (IF-MIB) |
+-------------------------------+-----------------------------------+ +--------------------------------+------------------------------------+
| aLineOperState | ifOperStatus (IF-MIB) | | aLineRemoteDiscoveryCode | gBondBceConfRemoteDiscoveryCode |
+-------------------------------+-----------------------------------+ +--------------------------------+------------------------------------+
| aLineStatus | *dsl*CurrStatus (*DSL-LINE-MIB) | | aLineUpDownEnable | ifLinkUpDownTrapEnable (IF-MIB) |
+-------------------------------+-----------------------------------+ +--------------------------------+------------------------------------+
| aLineEnd | *dsl*Side (*DSL-LINE-MIB) | | nLineUp | LinkUp (IF-MIB) |
+-------------------------------+-----------------------------------+ +--------------------------------+------------------------------------+
| aLineAdminState | ifAdminStatus (IF-MIB) | | nLineDown | LinkDown (IF-MIB) |
+-------------------------------+-----------------------------------+ +--------------------------------+------------------------------------+
| aLineRemoteDiscoveryCode | gBondBceConfRemoteDiscoveryCode | | oChannel - Basic Package | |
+-------------------------------+-----------------------------------+ | (Mandatory) | |
| aLineUpDownEnable | ifLinkUpDownTrapEnable (IF-MIB) | +--------------------------------+------------------------------------+
+-------------------------------+-----------------------------------+ | aChannelID | ifIndex (IF-MIB) |
| nLineUp | linkUp (IF-MIB) | +--------------------------------+------------------------------------+
+-------------------------------+-----------------------------------+ | aChannelGroupID | |
| nLineDown | linkDown (IF-MIB) | +--------------------------------+------------------------------------+
+-------------------------------+-----------------------------------+ | aChannelType | ifType (IF-MIB) |
| oChannel - Basic Package | | +--------------------------------+------------------------------------+
| (Mandatory) | | | aChannelOperState | ifOperStatus (IF-MIB) |
+-------------------------------+-----------------------------------+ +--------------------------------+------------------------------------+
| aChannelID | ifIndex (IF-MIB) | | aChannelStatus | *dsl*CurrStatus (*DSL-LINE-MIB), |
+-------------------------------+-----------------------------------+ | | xdsl2ChStatus*Status |
| aChannelGroupID | | | | (VDSL2-LINE-MIB) |
+-------------------------------+-----------------------------------+ +--------------------------------+------------------------------------+
| aChannelType | ifType (IF-MIB) |
+-------------------------------+-----------------------------------+
| aChannelOperState | ifOperStatus (IF-MIB) |
+-------------------------------+-----------------------------------+
| aChannelStatus | *dsl*CurrStatus (*DSL-LINE-MIB), |
| | xdsl2ChStatus*Status |
| | (VDSL2-LINE-MIB) |
+-------------------------------+-----------------------------------+
Table 2: Mapping of TR-159 Managed Objects Table 2: Mapping of TR-159 Managed Objects
6. xDSL Multi-pair Bonding MIB Definitions 6. xDSL Multi-Pair Bonding MIB Definitions
The GBOND-MIB module IMPORTS objects from SNMPv2-SMI [RFC2578],
SNMPv2-TC [RFC2579], SNMPv2-CONF [RFC2580], SNMP-FRAMEWORK-MIB
[RFC3411], IF-MIB [RFC2863], and HC-PerfHist-TC-MIB [RFC3705].
The module has been structured as recommended by [RFC4181].
GBOND-MIB DEFINITIONS ::= BEGIN GBOND-MIB DEFINITIONS ::= BEGIN
IMPORTS IMPORTS
MODULE-IDENTITY, MODULE-IDENTITY,
OBJECT-TYPE, OBJECT-TYPE,
NOTIFICATION-TYPE, NOTIFICATION-TYPE,
mib-2, mib-2,
Unsigned32, Unsigned32,
Gauge32 Gauge32
FROM SNMPv2-SMI -- [RFC2578] FROM SNMPv2-SMI -- RFC 2578
TEXTUAL-CONVENTION, TEXTUAL-CONVENTION,
TruthValue, TruthValue,
RowStatus, RowStatus,
PhysAddress PhysAddress
FROM SNMPv2-TC -- [RFC2579] FROM SNMPv2-TC -- RFC 2579
MODULE-COMPLIANCE, MODULE-COMPLIANCE,
OBJECT-GROUP, OBJECT-GROUP,
NOTIFICATION-GROUP NOTIFICATION-GROUP
FROM SNMPv2-CONF -- [RFC2580] FROM SNMPv2-CONF -- RFC 2580
SnmpAdminString SnmpAdminString
FROM SNMP-FRAMEWORK-MIB -- [RFC3411] FROM SNMP-FRAMEWORK-MIB -- RFC 3411
ifIndex ifIndex
FROM IF-MIB -- [RFC2863] FROM IF-MIB -- RFC 2863
HCPerfCurrentCount, HCPerfCurrentCount,
HCPerfIntervalCount, HCPerfIntervalCount,
HCPerfIntervalThreshold, HCPerfIntervalThreshold,
HCPerfValidIntervals, HCPerfValidIntervals,
HCPerfInvalidIntervals, HCPerfInvalidIntervals,
HCPerfTimeElapsed, HCPerfTimeElapsed,
HCPerfTotalCount HCPerfTotalCount
FROM HC-PerfHist-TC-MIB -- [RFC3705] FROM HC-PerfHist-TC-MIB -- RFC 3705
IANAgBondScheme, IANAgBondScheme,
IANAgBondSchemeList IANAgBondSchemeList
FROM IANA-GBOND-TC-MIB FROM IANA-GBOND-TC-MIB
; ;
------------------------------------------------------------------------ ------------------------------------------------------------------------
gBondMIB MODULE-IDENTITY gBondMIB MODULE-IDENTITY
LAST-UPDATED "201207160000Z" -- Jul 16, 2012 LAST-UPDATED "201302200000Z" -- 20 February 2013
ORGANIZATION "IETF ADSL MIB Working Group" ORGANIZATION "IETF ADSL MIB Working Group"
CONTACT-INFO CONTACT-INFO
"WG charter: "WG charter:
http://www.ietf.org/html.charters/adslmib-charter.html http://datatracker.ietf.org/wg/adslmib/charter/
Mailing Lists: Mailing Lists:
General Discussion: adslmib@ietf.org General Discussion: adslmib@ietf.org
To Subscribe: adslmib-request@ietf.org To Subscribe: adslmib-request@ietf.org
In Body: subscribe your_email_address In Body: subscribe your_email_address
Chair: Menachem Dodge Chair: Menachem Dodge
Postal: ECI Telecom, Ltd. Postal: ECI Telecom, Ltd.
30 Hasivim St., 30 Hasivim St.
Petach-Tikva 4951169 Petach-Tikva 4951169
Israel Israel
Phone: +972-3-926-8421 Phone: +972-3-926-8421
EMail: menachem.dodge@ecitele.com EMail: menachemdodge1@gmail.com
Editor: Edward Beili Editor: Edward Beili
Postal: Actelis Networks, Inc. Postal: Actelis Networks, Inc.
25 Bazel St., P.O.B. 10173 25 Bazel St., P.O.B. 10173
Petach-Tikva 49103 Petach-Tikva 49103
Israel Israel
Phone: +972-3-924-3491 Phone: +972-3-924-3491
EMail: edward.beili@actelis.com EMail: edward.beili@actelis.com
Editor: Moti Morgenstern Editor: Moti Morgenstern
Postal: ECI Telecom Postal: ECI Telecom
30 Hasivim St. 30 Hasivim St.
Petach-Tikva 4951169 Petach-Tikva 4951169
Israel Israel
Phone: +972-3-926-6258 Phone: +972-3-926-6258
EMail: moti.morgenstern@ecitele.com" EMail: moti.morgenstern@ecitele.com"
DESCRIPTION DESCRIPTION
"The objects in this MIB module are used to manage the "The objects in this MIB module are used to manage the
multi-pair bonded xDSL Interfaces, defined in ITU-T multi-pair bonded xDSL interfaces, as defined in ITU-T
recommendations G.998.1, G.998.2 and G.998.3. Recommendations G.998.1, G.998.2, and G.998.3.
This MIB module MUST be used in conjunction with a bonding This MIB module MUST be used in conjunction with a bonding
scheme specific MIB module, that is, G9981-MIB, G9982-MIB or scheme-specific MIB module, that is, G9981-MIB, G9982-MIB,
G9983-MIB. or G9983-MIB.
The following references are used throughout this MIB module: The following references are used throughout this MIB module:
[G.998.1] refers to: [G.998.1] refers to:
ITU-T Recommendation G.998.1: 'ATM-based multi-pair bonding', ITU-T Recommendation G.998.1: 'ATM-based multi-pair bonding',
January 2005. January 2005.
[G.998.2] refers to: [G.998.2] refers to:
ITU-T Recommendation G.998.2: 'Ethernet-based multi-pair ITU-T Recommendation G.998.2: 'Ethernet-based multi-pair
bonding', January 2005. bonding', January 2005.
skipping to change at page 20, line 7 skipping to change at page 21, line 25
[G.998.3] refers to: [G.998.3] refers to:
ITU-T Recommendation G.998.3: 'Multi-pair bonding using ITU-T Recommendation G.998.3: 'Multi-pair bonding using
time-division inverse multiplexing', January 2005. time-division inverse multiplexing', January 2005.
[TR-159] refers to: [TR-159] refers to:
Broadband Forum Technical Report: 'Management Framework for Broadband Forum Technical Report: 'Management Framework for
xDSL Bonding', December 2008. xDSL Bonding', December 2008.
Naming Conventions: Naming Conventions:
BCE - Bonding Channel Entity BCE - Bonding Channel Entity
BTU - Bonding Transmission Unit BTU - Bonding Terminating Unit
BTU-C - Bonding Transmission Unit, CO side BTU-C - Bonding Terminating Unit, CO side
BTU-R - Bonding Transmission Unit, Remote Terminal (CPE) side BTU-R - Bonding Terminating Unit, Remote Terminal (CPE) side
CO - Central Office CO - Central Office
CPE - Customer Premises Equipment CPE - Customer Premises Equipment
GBS - Generic Bonding Sublayer GBS - Generic Bonding Sub-layer
PM - Performance Monitoring PM - Performance Monitoring
SNR - Signal to Noise Ratio SNR - Signal to Noise Ratio
TCA - Threshold Crossing Alert TCA - Threshold Crossing Alert
Copyright (C) The IETF Trust (2012). Copyright (c) 2013 IETF Trust and the persons identified as
This version of this MIB module is part of RFC XXXX; authors of the code. All rights reserved.
see the RFC itself for full legal notices."
REVISION "201207160000Z" -- Jul 16, 2012
DESCRIPTION "Initial version, published as RFC XXXX."
-- EdNote: Replace XXXX with the actual RFC number & Redistribution and use in source and binary forms, with or without
-- remove this note modification, is permitted pursuant to, and subject to the license
terms contained in, the Simplified BSD License set forth in Section
4.c of the IETF Trust's Legal Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info)."
::= { mib-2 ZZZ } REVISION "201302200000Z" -- 20 February 2013
DESCRIPTION "Initial version, published as RFC 6765."
-- EdNote: Replace ZZZ with a real OID once it is ::= { mib-2 211 }
-- allocated & remove this note.
-- Sections of the module -- Sections of the module
-- Structured as recommended by [RFC4181], Appendix D -- Structured as recommended by RFC 4181, Appendix D
gBondObjects OBJECT IDENTIFIER ::= { gBondMIB 1 } gBondObjects OBJECT IDENTIFIER ::= { gBondMIB 1 }
gBondConformance OBJECT IDENTIFIER ::= { gBondMIB 2 } gBondConformance OBJECT IDENTIFIER ::= { gBondMIB 2 }
-- Groups in the module -- Groups in the module
gBondPort OBJECT IDENTIFIER ::= { gBondObjects 1 } gBondPort OBJECT IDENTIFIER ::= { gBondObjects 1 }
gBondBce OBJECT IDENTIFIER ::= { gBondObjects 2 } gBondBce OBJECT IDENTIFIER ::= { gBondObjects 2 }
-- Textual Conventions -- Textual Conventions
GBondPm1DayIntervalThreshold ::= TEXTUAL-CONVENTION GBondPm1DayIntervalThreshold ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d" DISPLAY-HINT "d"
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This textual convention defines a range of values that may be "This textual convention defines a range of values that may be
set in a fault threshold alarm control for a 1-day performance set in a fault threshold alarm control for a 1-day Performance
monitoring interval. Monitoring interval.
As the number of seconds in a 1-day interval numbers at most As the number of seconds in a 1-day interval numbers at most
86400, objects of this type may have a range of 0...86400, 86400, objects of this type may have a range of 0...86400,
where the value of 0 disables the alarm." where the value of 0 disables the alarm."
SYNTAX Unsigned32 (0..86400) SYNTAX Unsigned32 (0..86400)
-- Port Notifications Group -- Port Notifications group
gBondPortNotifications OBJECT IDENTIFIER ::= { gBondPort 0 } gBondPortNotifications OBJECT IDENTIFIER ::= { gBondPort 0 }
gBondLowUpRateCrossing NOTIFICATION-TYPE gBondLowUpRateCrossing NOTIFICATION-TYPE
OBJECTS { OBJECTS {
-- ifIndex is not needed here since we are under specific GBS -- ifIndex is not needed here, since we are under specific GBS
gBondPortStatUpDataRate, gBondPortStatUpDataRate,
gBondPortConfThreshLowUpRate gBondPortConfThreshLowUpRate
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This notification indicates that the G.Bond port's upstream "This notification indicates that the G.Bond port's upstream
data rate has reached/dropped below or exceeded the low data rate has reached/dropped below or exceeded the low
upstream rate threshold, specified by upstream rate threshold, specified by
gBondPortConfThreshLowUpRate. gBondPortConfThreshLowUpRate.
This notification MAY be sent for the -O subtype ports This notification MAY be sent for the -O subtype ports
while the port is up, on the crossing event in both while the port is 'up', on the crossing event in both
directions: from normal (rate is above the threshold) to low directions: from normal (rate is above the threshold) to low
(rate equals the threshold or below it) and from low to (rate equals the threshold or is below it) and from low to
normal. This notification is not applicable to the -R normal. This notification is not applicable to the -R
subtypes. subtypes.
It is RECOMMENDED that a small debouncing period of 2.5 sec, It is RECOMMENDED that a small debouncing period of 2.5 sec,
between the detection of the condition and notification, between the detection of the condition and notification,
is implemented to prevent simultaneous LinkUp/LinkDown and be implemented to prevent simultaneous LinkUp/LinkDown and
gBondLowUpRateCrossing notifications to be sent. gBondLowUpRateCrossing notifications from being sent.
The adaptive nature of the G.Bond technology allows the port The adaptive nature of the G.Bond technology allows the port
to adapt itself to the changes in the copper environment, to adapt itself to the changes in the copper environment;
e.g., an impulse noise, alien crosstalk, or a e.g., an impulse noise, alien crosstalk, or a
micro-interruption may temporarily drop one or more BCEs in micro-interruption may temporarily drop one or more BCEs in
the aggregation group, causing a rate degradation of the the aggregation group, causing a rate degradation of the
aggregated G.Bond link. The dropped BCEs would then try to aggregated G.Bond link. The dropped BCEs would then try to
re-initialize, possibly at a lower rate than before, adjusting re-initialize, possibly at a lower rate than before, adjusting
the rate to provide required target SNR margin. the rate to provide the required target SNR margin.
Generation of this notification is controlled by the Generation of this notification is controlled by the
gBondPortConfLowRateCrossingEnable object. gBondPortConfLowRateCrossingEnable object.
This object maps to the TR-159 notification This object maps to the TR-159 notification
nGroupLowUpRateCrossing." nGroupLowUpRateCrossing."
REFERENCE REFERENCE
"[TR-159] 5.5.1.24" "[TR-159], Section 5.5.1.24"
::= { gBondPortNotifications 1 } ::= { gBondPortNotifications 1 }
gBondLowDnRateCrossing NOTIFICATION-TYPE gBondLowDnRateCrossing NOTIFICATION-TYPE
OBJECTS { OBJECTS {
-- ifIndex is not needed here since we are under specific GBS -- ifIndex is not needed here, since we are under specific GBS
gBondPortStatDnDataRate, gBondPortStatDnDataRate,
gBondPortConfThreshLowDnRate gBondPortConfThreshLowDnRate
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This notification indicates that the G.Bond port's downstream "This notification indicates that the G.Bond port's downstream
data rate has reached/dropped below or exceeded the low data rate has reached/dropped below or exceeded the low
downstream rate threshold, specified by downstream rate threshold, specified by
gBondPortConfThreshLowDnRate. gBondPortConfThreshLowDnRate.
This notification MAY be sent for the -O subtype ports This notification MAY be sent for the -O subtype ports
while the port is up, on the crossing event in both while the port is 'up', on the crossing event in both
directions: from normal (rate is above the threshold) to low directions: from normal (rate is above the threshold) to low
(rate equals the threshold or below it) and from low to (rate equals the threshold or is below it) and from low to
normal. This notification is not applicable to the -R normal. This notification is not applicable to the -R
subtypes. subtypes.
It is RECOMMENDED that a small debouncing period of 2.5 sec, It is RECOMMENDED that a small debouncing period of 2.5 sec,
between the detection of the condition and notification, between the detection of the condition and notification,
is implemented to prevent simultaneous LinkUp/LinkDown and be implemented to prevent simultaneous LinkUp/LinkDown and
gBondLowDnRateCrossing notifications to be sent. gBondLowDnRateCrossing notifications from being sent.
The adaptive nature of the G.Bond technology allows the port The adaptive nature of the G.Bond technology allows the port
to adapt itself to the changes in the copper environment, to adapt itself to the changes in the copper environment;
e.g., an impulse noise, alien crosstalk, or a e.g., an impulse noise, alien crosstalk, or a
micro-interruption may temporarily drop one or more BCEs in micro-interruption may temporarily drop one or more BCEs in
the aggregation group, causing a rate degradation of the the aggregation group, causing a rate degradation of the
aggregated G.Bond link. The dropped BCEs would then try to aggregated G.Bond link. The dropped BCEs would then try to
re-initialize, possibly at a lower rate than before, re-initialize, possibly at a lower rate than before,
adjusting the rate to provide required target SNR margin. adjusting the rate to provide the required target SNR margin.
Generation of this notification is controlled by the Generation of this notification is controlled by the
gBondPortConfLowRateCrossingEnable object. gBondPortConfLowRateCrossingEnable object.
This object maps to the TR-159 notification This object maps to the TR-159 notification
nGroupLowDownRateCrossing." nGroupLowDownRateCrossing."
REFERENCE REFERENCE
"[TR-159] 5.5.1.25" "[TR-159], Section 5.5.1.25"
::= { gBondPortNotifications 2} ::= { gBondPortNotifications 2}
gBondPmTca15MinESCrossing NOTIFICATION-TYPE gBondPmTca15MinESCrossing NOTIFICATION-TYPE
OBJECTS { OBJECTS {
-- ifIndex is not needed here since we are under specific GBS -- ifIndex is not needed here, since we are under specific GBS
gBondPortPmCur15MinES, gBondPortPmCur15MinES,
gBondPortPmTcaProfileThresh15MinES gBondPortPmTcaProfileThresh15MinES
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This notification indicates that the Errored Seconds threshold, "This notification indicates that the Errored Seconds threshold,
specified by gBondPortPmTcaProfileThresh15MinES, has been specified by gBondPortPmTcaProfileThresh15MinES, has been
reached or exceeded for the GPS port. reached or exceeded for the GBS port.
Generation of this notification is controlled by Generation of this notification is controlled by the
gBondPortConfPmTcaEnable and gBondPortConfPmTcaEnable and
gBondPortPmTcaProfileThresh15MinES objects. gBondPortPmTcaProfileThresh15MinES objects.
This object maps to the TR-159 notification This object maps to the TR-159 notification
nGroupPerfTca15MinES." nGroupPerfTca15MinES."
REFERENCE REFERENCE
"[TR-159] 5.5.1.42" "[TR-159], Section 5.5.1.42"
::= { gBondPortNotifications 3} ::= { gBondPortNotifications 3}
gBondPmTca15MinSESCrossing NOTIFICATION-TYPE gBondPmTca15MinSESCrossing NOTIFICATION-TYPE
OBJECTS { OBJECTS {
-- ifIndex is not needed here since we are under specific GBS -- ifIndex is not needed here, since we are under specific GBS
gBondPortPmCur15MinSES, gBondPortPmCur15MinSES,
gBondPortPmTcaProfileThresh15MinSES gBondPortPmTcaProfileThresh15MinSES
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This notification indicates that the Severely Errored Seconds "This notification indicates that the Severely Errored Seconds
threshold, specified by gBondPortPmTcaProfileThresh15MinSES, threshold, specified by gBondPortPmTcaProfileThresh15MinSES,
has been reached or exceeded for the GPS port. has been reached or exceeded for the GBS port.
Generation of this notification is controlled by Generation of this notification is controlled by the
gBondPortConfPmTcaEnable and gBondPortConfPmTcaEnable and
gBondPortPmTcaProfileThresh15MinSES objects. gBondPortPmTcaProfileThresh15MinSES objects.
This object maps to the TR-159 notification This object maps to the TR-159 notification
nGroupPerfTca15MinSES." nGroupPerfTca15MinSES."
REFERENCE REFERENCE
"[TR-159] 5.5.1.43" "[TR-159], Section 5.5.1.43"
::= { gBondPortNotifications 4} ::= { gBondPortNotifications 4}
gBondPmTca15MinUASCrossing NOTIFICATION-TYPE gBondPmTca15MinUASCrossing NOTIFICATION-TYPE
OBJECTS { OBJECTS {
-- ifIndex is not needed here since we are under specific GBS -- ifIndex is not needed here, since we are under specific GBS
gBondPortPmCur15MinUAS, gBondPortPmCur15MinUAS,
gBondPortPmTcaProfileThresh15MinUAS gBondPortPmTcaProfileThresh15MinUAS
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This notification indicates that the Unavailable Seconds "This notification indicates that the Unavailable Seconds
threshold, specified by gBondPortPmTcaProfileThresh15MinES, threshold, specified by gBondPortPmTcaProfileThresh15MinUAS,
has been reached or exceeded for the GPS port. has been reached or exceeded for the GBS port.
Generation of this notification is controlled by Generation of this notification is controlled by the
gBondPortConfPmTcaEnable and gBondPortConfPmTcaEnable and
gBondPortPmTcaProfileThresh15MinUAS objects. gBondPortPmTcaProfileThresh15MinUAS objects.
This object maps to the TR-159 notification This object maps to the TR-159 notification
nGroupPerfTca15MinUAS." nGroupPerfTca15MinUAS."
REFERENCE REFERENCE
"[TR-159] 5.5.1.44" "[TR-159], Section 5.5.1.44"
::= { gBondPortNotifications 5} ::= { gBondPortNotifications 5}
gBondPmTca1DayESCrossing NOTIFICATION-TYPE gBondPmTca1DayESCrossing NOTIFICATION-TYPE
OBJECTS { OBJECTS {
-- ifIndex is not needed here since we are under specific GBS -- ifIndex is not needed here, since we are under specific GBS
gBondPortPmCur1DayES, gBondPortPmCur1DayES,
gBondPortPmTcaProfileThresh1DayES gBondPortPmTcaProfileThresh1DayES
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This notification indicates that the Errored Seconds threshold, "This notification indicates that the Errored Seconds threshold,
specified by gBondPortPmTcaProfileThresh1DayES, has been specified by gBondPortPmTcaProfileThresh1DayES, has been
reached or exceeded for the GPS port. reached or exceeded for the GBS port.
Generation of this notification is controlled by Generation of this notification is controlled by the
gBondPortConfPmTcaEnable and gBondPortConfPmTcaEnable and
gBondPortPmTcaProfileThresh1DayES objects. gBondPortPmTcaProfileThresh1DayES objects.
This object maps to the TR-159 notification This object maps to the TR-159 notification
nGroupPerfTca1DayES." nGroupPerfTca1DayES."
REFERENCE REFERENCE
"[TR-159] 5.5.1.54" "[TR-159], Section 5.5.1.54"
::= { gBondPortNotifications 6} ::= { gBondPortNotifications 6}
gBondPmTca1DaySESCrossing NOTIFICATION-TYPE gBondPmTca1DaySESCrossing NOTIFICATION-TYPE
OBJECTS { OBJECTS {
-- ifIndex is not needed here since we are under specific GBS -- ifIndex is not needed here, since we are under specific GBS
gBondPortPmCur1DaySES, gBondPortPmCur1DaySES,
gBondPortPmTcaProfileThresh1DaySES gBondPortPmTcaProfileThresh1DaySES
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This notification indicates that the Severely Errored Seconds "This notification indicates that the Severely Errored Seconds
threshold, specified by gBondPortPmTcaProfileThresh1DaySES, threshold, specified by gBondPortPmTcaProfileThresh1DaySES,
has been reached or exceeded for the GPS port. has been reached or exceeded for the GBS port.
Generation of this notification is controlled by Generation of this notification is controlled by the
gBondPortConfPmTcaEnable and gBondPortConfPmTcaEnable and
gBondPortPmTcaProfileThresh1DaySES objects. gBondPortPmTcaProfileThresh1DaySES objects.
This object maps to the TR-159 notification This object maps to the TR-159 notification
nGroupPerfTca1DaySES." nGroupPerfTca1DaySES."
REFERENCE REFERENCE
"[TR-159] 5.5.1.55" "[TR-159], Section 5.5.1.55"
::= { gBondPortNotifications 7} ::= { gBondPortNotifications 7}
gBondPmTca1DayUASCrossing NOTIFICATION-TYPE gBondPmTca1DayUASCrossing NOTIFICATION-TYPE
OBJECTS { OBJECTS {
-- ifIndex is not needed here since we are under specific GBS -- ifIndex is not needed here, since we are under specific GBS
gBondPortPmCur1DayUAS, gBondPortPmCur1DayUAS,
gBondPortPmTcaProfileThresh1DayUAS gBondPortPmTcaProfileThresh1DayUAS
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This notification indicates that the Unavailable Seconds "This notification indicates that the Unavailable Seconds
threshold, specified by gBondPortPmTcaProfileThresh1DayUAS, threshold, specified by gBondPortPmTcaProfileThresh1DayUAS,
has been reached or exceeded for the GPS port. has been reached or exceeded for the GBS port.
Generation of this notification is controlled by Generation of this notification is controlled by the
gBondPortConfPmTcaEnable and gBondPortConfPmTcaEnable and
gBondPortPmTcaProfileThresh1DayUAS objects. gBondPortPmTcaProfileThresh1DayUAS objects.
This object maps to the TR-159 notification This object maps to the TR-159 notification
nGroupPerfTca1DayUAS." nGroupPerfTca1DayUAS."
REFERENCE REFERENCE
"[TR-159] 5.5.1.56" "[TR-159], Section 5.5.1.56"
::= { gBondPortNotifications 8} ::= { gBondPortNotifications 8}
-- G.Bond Port (GBS) group -- G.Bond Port (GBS) group
gBondPortConfTable OBJECT-TYPE gBondPortConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF GBondPortConfEntry SYNTAX SEQUENCE OF GBondPortConfEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Table for configuration of G.Bond GBS ports. Entries in this "Table for configuration of G.Bond GBS ports. Entries in this
table MUST be maintained in a persistent manner" table MUST be maintained in a persistent manner."
::= { gBondPort 1 } ::= { gBondPort 1 }
gBondPortConfEntry OBJECT-TYPE gBondPortConfEntry OBJECT-TYPE
SYNTAX GBondPortConfEntry SYNTAX GBondPortConfEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry in the G.Bond Port Configuration table. "An entry in the G.Bond Port Configuration table.
Each entry represents a G.Bond port indexed by the ifIndex. Each entry represents a G.Bond port indexed by the ifIndex.
Note that a G.Bond GBS port runs on top of a single Note that a G.Bond GBS port runs on top of a single
or multiple BCE port(s), which are also indexed by ifIndex." or multiple BCE port(s), which are also indexed by the ifIndex."
INDEX { ifIndex } INDEX { ifIndex }
::= { gBondPortConfTable 1 } ::= { gBondPortConfTable 1 }
GBondPortConfEntry ::= GBondPortConfEntry ::=
SEQUENCE { SEQUENCE {
gBondPortConfAdminScheme IANAgBondScheme, gBondPortConfAdminScheme IANAgBondScheme,
gBondPortConfPeerAdminScheme IANAgBondScheme, gBondPortConfPeerAdminScheme IANAgBondScheme,
gBondPortConfDiscoveryCode PhysAddress, gBondPortConfDiscoveryCode PhysAddress,
gBondPortConfTargetUpDataRate Unsigned32, gBondPortConfTargetUpDataRate Unsigned32,
gBondPortConfTargetDnDataRate Unsigned32, gBondPortConfTargetDnDataRate Unsigned32,
skipping to change at page 26, line 35 skipping to change at page 28, line 6
gBondPortConfPmTcaConfProfile SnmpAdminString, gBondPortConfPmTcaConfProfile SnmpAdminString,
gBondPortConfPmTcaEnable TruthValue gBondPortConfPmTcaEnable TruthValue
} }
gBondPortConfAdminScheme OBJECT-TYPE gBondPortConfAdminScheme OBJECT-TYPE
SYNTAX IANAgBondScheme SYNTAX IANAgBondScheme
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A desired bonding scheme for a G.Bond GBS port. "A desired bonding scheme for a G.Bond GBS port.
The following values instruct the port to use corresponding The following values instruct the port to use the corresponding
bonding scheme if supported: bonding scheme if supported:
none(0) - instructs the port not to use bonding none(0) - instructs the port not to use bonding
(only on single-BCE G.998.2 GBS) (only on a single-BCE G.998.2 GBS)
g9981(1) - instructs the port to use G.998.1 bonding g9981(1) - instructs the port to use G.998.1 bonding
g9982(2) - instructs the port to use G.998.2 bonding g9982(2) - instructs the port to use G.998.2 bonding
g9983(3) - instructs the port to use G.998.3 bonding g9983(3) - instructs the port to use G.998.3 bonding
Changing of gBondPortConfAdminScheme MUST be performed when the Changing of the gBondPortConfAdminScheme object MUST be
link is administratively 'down', as indicated by the performed when the link is administratively 'down', as indicated
ifAdminStatus object in IF-MIB. by the ifAdminStatus object in the IF-MIB.
Attempts to change this object MUST be rejected (in case of SNMP Attempts to change this object MUST be rejected (in the case of
with the error inconsistentValue), if the link is Up or SNMP, with the error inconsistentValue), if the link is 'up' or
Initializing. Attempts to change this object to an unsupported initializing. Attempts to change this object to an unsupported
bonding scheme (see gBondPortCapSchemesSupported) SHALL be bonding scheme (see gBondPortCapSchemesSupported) SHALL be
rejected (in case of SNMP with the error wrongValue). rejected (in the case of SNMP, with the error wrongValue).
Setting this object to the value of 'none' must be rejected for Setting this object to the value of 'none' must be rejected for
GBS ports with multiple BCEs (with the error inconsistentValue). GBS ports with multiple BCEs (with the error inconsistentValue).
This object maps to the TR-159 attribute aGroupAdminBondScheme." This object maps to the TR-159 attribute aGroupAdminBondScheme."
REFERENCE REFERENCE
"[TR-159] 5.5.1.6; IF-MIB, ifAdminStatus" "[TR-159], Section 5.5.1.6; RFC 2863, IF-MIB, ifAdminStatus"
::= { gBondPortConfEntry 1 } ::= { gBondPortConfEntry 1 }
gBondPortConfPeerAdminScheme OBJECT-TYPE gBondPortConfPeerAdminScheme OBJECT-TYPE
SYNTAX IANAgBondScheme SYNTAX IANAgBondScheme
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A desired bonding scheme for a peer (link partner) G.Bond "A desired bonding scheme for a peer (link partner) G.Bond
port (GBS). port (GBS).
The following values instruct the peer port to use The following values instruct the peer port to use the
corresponding bonding scheme if supported: corresponding bonding scheme if supported:
none(0) - instructs the port not to use bonding none(0) - instructs the port not to use bonding
(only on single-BCE G.998.2 GBS) (only on a single-BCE G.998.2 GBS)
g9981(1) - instructs the port to use G.998.1 bonding g9981(1) - instructs the port to use G.998.1 bonding
g9982(2) - instructs the port to use G.998.2 bonding g9982(2) - instructs the port to use G.998.2 bonding
g9983(3) - instructs the port to use G.998.3 bonding g9983(3) - instructs the port to use G.998.3 bonding
Changing of this object MUST be performed when the link is Changing of this object MUST be performed when the link is
administratively 'down', as indicated by the ifAdminStatus administratively 'down', as indicated by the ifAdminStatus
object in IF-MIB. object in the IF-MIB.
Attempts to change this object MUST be rejected (in case of SNMP Attempts to change this object MUST be rejected (in the case of
with the error inconsistentValue), if the link is Up or SNMP, with the error inconsistentValue), if the link is 'up' or
Initializing. Attempts to change this object to an unsupported initializing. Attempts to change this object to an unsupported
bonding scheme (see gBondPortCapPeerSchemesSupported) SHALL be bonding scheme (see gBondPortCapPeerSchemesSupported) SHALL be
rejected (in case of SNMP with the error wrongValue). rejected (in the case of SNMP, with the error wrongValue).
Setting this object to the value of 'none' must be rejected for Setting this object to the value of 'none' must be rejected for
GBS ports with multiple BCEs (with the error inconsistentValue). GBS ports with multiple BCEs (with the error inconsistentValue).
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupPeerAdminBondScheme." aGroupPeerAdminBondScheme."
REFERENCE REFERENCE
"[TR-159] 5.5.1.7; IF-MIB, ifAdminStatus" "[TR-159], Section 5.5.1.7; RFC 2863, IF-MIB, ifAdminStatus"
::= { gBondPortConfEntry 2 } ::= { gBondPortConfEntry 2 }
gBondPortConfDiscoveryCode OBJECT-TYPE gBondPortConfDiscoveryCode OBJECT-TYPE
SYNTAX PhysAddress (SIZE(6)) SYNTAX PhysAddress (SIZE (6))
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A Discovery Code of the G.Bond port (GBS). "A discovery code of the G.Bond port (GBS).
A unique 6 octet long code used by the Discovery function. A unique 6-octet-long code used by the Discovery function.
This object MUST be instantiated for the -O subtype GBS before This object MUST be instantiated for the -O subtype GBS before
writing operations on the gBondBceConfRemoteDiscoveryCode write operations on the gBondBceConfRemoteDiscoveryCode
(Set_if_Clear and Clear_if_Same) are performed by BCEs (Set_if_Clear and Clear_if_Same) are performed by BCEs
associated with the GBS. associated with the GBS.
The initial value of this object for -R subtype ports after The initial value of this object for -R subtype ports after
reset is all zeroes. For -R subtype ports, the value of this reset is all zeroes. For -R subtype ports, the value of this
object cannot be changed directly. This value may be changed object cannot be changed directly. This value may be changed
as a result of writing operation on the as a result of a write operation on the
gBondBceConfRemoteDiscoveryCode object of remote BCE of -O gBondBceConfRemoteDiscoveryCode object of a remote BCE of -O
subtype, connected to one of the local BCEs associated with subtype, connected to one of the local BCEs associated with
the GBS. the GBS.
Discovery MUST be performed when the link is administratively Discovery MUST be performed when the link is administratively
'down', as indicated by the ifAdminStatus object in IF-MIB. 'down', as indicated by the ifAdminStatus object in the IF-MIB.
Attempts to change this object MUST be rejected (in case of Attempts to change this object MUST be rejected (in the case of
SNMP with the error inconsistentValue), if the link is Up or SNMP, with the error inconsistentValue), if the link is 'up' or
Initializing. initializing.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupDiscoveryCode." aGroupDiscoveryCode."
REFERENCE REFERENCE
"[TR-159] 5.5.1.20; [802.3] 61.2.2.8.3, 61.2.2.8.4, "[TR-159], Section 5.5.1.20; [802.3], Sections 61.2.2.8.3,
45.2.6.6.1, 45.2.6.8, 61A.2; IF-MIB, ifAdminStatus" 61.2.2.8.4, 45.2.6.6.1, 45.2.6.8, 61A.2;
RFC 2863, IF-MIB, ifAdminStatus"
::= { gBondPortConfEntry 3 } ::= { gBondPortConfEntry 3 }
gBondPortConfTargetUpDataRate OBJECT-TYPE gBondPortConfTargetUpDataRate OBJECT-TYPE
SYNTAX Unsigned32(0|1..10000000) SYNTAX Unsigned32 (0|1..10000000)
UNITS "Kbps" UNITS "Kbps"
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A desired G.Bond port Data Rate in the upstream direction, "A desired G.Bond port data rate in the upstream direction,
in Kbps, to be achieved during initialization, under in Kbps, to be achieved during initialization, under
restrictions placed upon the member BCEs by their respective restrictions placed upon the member BCEs by their respective
configuration settings. configuration settings.
This object represents a sum of individual BCE upstream data This object represents a sum of individual BCE upstream data
rates, modified to compensate for fragmentation and rates, modified to compensate for fragmentation and
encapsulation overhead (e.g., for an Ethernet service, the encapsulation overhead (e.g., for an Ethernet service, the
target data rate of 10Mbps SHALL allow lossless transmission target data rate of 10 Mbps SHALL allow lossless transmission
of full-duplex 10Mbps Ethernet frame stream with minimal of full-duplex 10-Mbps Ethernet frame stream with minimal
inter-frame gap). inter-frame gap).
Note that the target upstream data rate may not be achieved Note that the target upstream data rate may not be achieved
during initialization (e.g., due to unavailability of required during initialization (e.g., due to unavailability of required
BCEs) or the initial bandwidth could deteriorate, so that the BCEs) or the initial bandwidth could deteriorate, so that the
actual upstream data rate (gBondPortStatUpDataRate) could be less actual upstream data rate (gBondPortStatUpDataRate) could be less
than gBondPortConfTargetUpDataRate. than gBondPortConfTargetUpDataRate.
The value is limited above by 10 Gbps, to accommodate very The value is limited above by 10 Gbps, to accommodate very
high speed bonded xDSL interfaces (e.g. 32 x 100Mbps). high speed bonded xDSL interfaces (e.g., 32 x 100 Mbps).
The value between 1 and 10000000 indicates that the total The value between 1 and 10000000 indicates that the total
upstream data rate of the G.Bond port after initialization upstream data rate of the G.Bond port after initialization
SHALL be equal to the target data rate or less, if the target SHALL be equal to the target data rate or less, if the target
upstream data rate cannot be achieved under the restrictions upstream data rate cannot be achieved under the restrictions
configured for BCEs. In case the copper environment allows to configured for BCEs. In cases where the copper environment
achieve higher upstream data rate than that specified by this allows a higher upstream data rate to be achieved than that
object, the excess capability SHALL be either converted to specified by this object, the excess capability SHALL be
additional SNR margin or reclaimed by minimizing transmit either converted to an additional SNR margin or reclaimed by
power. minimizing transmit power.
The value of 0 means that the target data rate is not The value of 0 means that the target data rate is not
fixed and SHALL be set to the maximum attainable rate during fixed and SHALL be set to the maximum attainable rate during
initialization (Best Effort), under specified spectral initialization (best effort), under specified spectral
restrictions and with desired SNR Margin per BCE. restrictions and with a desired SNR margin per BCE.
This object is read-write for the -O subtype G.Bond ports. This object is read-write for the -O subtype G.Bond ports.
It is irrelevant for the -R subtypes - attempts to read or It is irrelevant for the -R subtypes -- attempts to read or
change this object for such ports MUST be rejected (in case of change this object for such ports MUST be rejected (in the case
SNMP with the error inconsistentValue). of SNMP, with the error inconsistentValue).
Changing of the Target Upstream Data Rate MUST be performed Changing of the target upstream data rate MUST be performed
when the link is administratively 'down', as indicated by the when the link is administratively 'down', as indicated by the
ifAdminStatus object in IF-MIB. ifAdminStatus object in the IF-MIB.
Attempts to change this object MUST be rejected (in case of SNMP Attempts to change this object MUST be rejected (in the case of
with the error inconsistentValue), if the link is Up or SNMP, with the error inconsistentValue), if the link is 'up' or
Initializing. initializing.
This object maps to the TR-159 attribute aGroupTargetUpRate." This object maps to the TR-159 attribute aGroupTargetUpRate."
REFERENCE REFERENCE
"[TR-159] 5.5.1.17; IF-MIB, ifAdminStatus" "[TR-159], Section 5.5.1.17; RFC 2863, IF-MIB, ifAdminStatus"
::= { gBondPortConfEntry 4 } ::= { gBondPortConfEntry 4 }
gBondPortConfTargetDnDataRate OBJECT-TYPE gBondPortConfTargetDnDataRate OBJECT-TYPE
SYNTAX Unsigned32(0|1..10000000) SYNTAX Unsigned32 (0|1..10000000)
UNITS "Kbps" UNITS "Kbps"
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A desired G.Bond port Data Rate in the downstream direction, "A desired G.Bond port data rate in the downstream direction,
in Kbps, to be achieved during initialization, under in Kbps, to be achieved during initialization, under
restrictions placed upon the member BCEs by their respective restrictions placed upon the member BCEs by their respective
configuration settings. configuration settings.
This object represents a sum of individual BCE downstream data This object represents a sum of individual BCE downstream data
rates, modified to compensate for fragmentation and rates, modified to compensate for fragmentation and
encapsulation overhead (e.g., for an Ethernet service, the encapsulation overhead (e.g., for an Ethernet service, the
target data rate of 10Mbps SHALL allow lossless transmission target data rate of 10 Mbps SHALL allow lossless transmission
of full-duplex 10Mbps Ethernet frame stream with minimal of full-duplex 10-Mbps Ethernet frame stream with minimal
inter-frame gap). inter-frame gap).
Note that the target downstream data rate may not be achieved Note that the target downstream data rate may not be achieved
during initialization (e.g., due to unavailability of required during initialization (e.g., due to unavailability of required
BCEs) or the initial bandwidth could deteriorate, so that the BCEs) or the initial bandwidth could deteriorate, so that the
actual downstream data rate (gBondPortStatDnDataRate) could be actual downstream data rate (gBondPortStatDnDataRate) could be
less than gBondPortConfTargetDnDataRate. less than gBondPortConfTargetDnDataRate.
The value is limited above by 10 Gbps, to accommodate very The value is limited above by 10 Gbps, to accommodate very
high speed bonded xDSL interfaces (e.g. 32 x 100Mbps). high speed bonded xDSL interfaces (e.g., 32 x 100 Mbps).
The value between 1 and 10000000 indicates that the total The value between 1 and 10000000 indicates that the total
downstream data rate of the G.Bond port after initialization downstream data rate of the G.Bond port after initialization
SHALL be equal to the target data rate or less, if the target SHALL be equal to the target data rate or less, if the target
downstream data rate cannot be achieved under the restrictions downstream data rate cannot be achieved under the restrictions
configured for BCEs. In case the copper environment allows to configured for BCEs. In cases where the copper environment
achieve higher downstream data rate than that specified by allows a higher downstream data rate to be achieved than that
this object, the excess capability SHALL be either converted specified by this object, the excess capability SHALL be
to additional SNR margin or reclaimed by minimizing transmit either converted to an additional SNR margin or reclaimed by
power. minimizing transmit power.
The value of 0 means that the target data rate is not The value of 0 means that the target data rate is not
fixed and SHALL be set to the maximum attainable rate during fixed and SHALL be set to the maximum attainable rate during
initialization (Best Effort), under specified spectral initialization (best effort), under specified spectral
restrictions and with desired SNR Margin per BCE. restrictions and with a desired SNR margin per BCE.
This object is read-write for the -O subtype G.Bond ports. This object is read-write for the -O subtype G.Bond ports.
It is irrelevant for the -R subtypes - attempts to read or It is irrelevant for the -R subtypes -- attempts to read or
change this object for such ports MUST be rejected (in case of change this object for such ports MUST be rejected (in the case
SNMP with the error inconsistentValue). of SNMP, with the error inconsistentValue).
Changing of the Target Downstream Data Rate MUST be performed Changing of the target downstream data rate MUST be performed
when the link is administratively 'down', as indicated by the when the link is administratively 'down', as indicated by the
ifAdminStatus object in IF-MIB. ifAdminStatus object in the IF-MIB.
Attempts to change this object MUST be rejected (in case of SNMP Attempts to change this object MUST be rejected (in the case of
with the error inconsistentValue), if the link is Up or SNMP, with the error inconsistentValue), if the link is 'up' or
Initializing. initializing.
This object maps to the TR-159 attribute aGroupTargetDownRate." This object maps to the TR-159 attribute aGroupTargetDownRate."
REFERENCE REFERENCE
"[TR-159] 5.5.1.18; IF-MIB, ifAdminStatus" "[TR-159], Section 5.5.1.18; RFC 2863, IF-MIB, ifAdminStatus"
::= { gBondPortConfEntry 5 } ::= { gBondPortConfEntry 5 }
gBondPortConfThreshLowUpRate OBJECT-TYPE gBondPortConfThreshLowUpRate OBJECT-TYPE
SYNTAX Unsigned32(1..10000000) SYNTAX Unsigned32 (1..10000000)
UNITS "Kbps" UNITS "Kbps"
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object configures the G.Bond port low upstream rate "This object configures the G.Bond port low upstream rate
crossing alarm threshold. When the current value of crossing alarm threshold. When the current value of
gBondPortStatUpDataRate for this port reaches/drops below or gBondPortStatUpDataRate for this port reaches/drops below or
exceeds this threshold, a gBondLowUpRateCrossing notification exceeds this threshold, a gBondLowUpRateCrossing notification
MAY be generated if enabled by MAY be generated if enabled by
gBondPortConfLowRateCrossingEnable. gBondPortConfLowRateCrossingEnable.
This object is read-write for the -O subtype G.Bond ports. This object is read-write for the -O subtype G.Bond ports.
It is irrelevant for the -R subtypes - attempts to read or It is irrelevant for the -R subtypes -- attempts to read or
change this object for such ports MUST be rejected (in case of change this object for such ports MUST be rejected (in the case
SNMP with the error inconsistentValue). of SNMP, with the error inconsistentValue).
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupthreshLowUpRate." aGroupthreshLowUpRate."
REFERENCE REFERENCE
"[TR-159] 5.5.1.21" "[TR-159], Section 5.5.1.21"
::= { gBondPortConfEntry 6 } ::= { gBondPortConfEntry 6 }
gBondPortConfThreshLowDnRate OBJECT-TYPE gBondPortConfThreshLowDnRate OBJECT-TYPE
SYNTAX Unsigned32(1..10000000) SYNTAX Unsigned32 (1..10000000)
UNITS "Kbps" UNITS "Kbps"
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object configures the G.Bond port low downstream rate "This object configures the G.Bond port low downstream rate
crossing alarm threshold. When the current value of crossing alarm threshold. When the current value of
gBondPortStatDnDataRate for this port reaches/drops below or gBondPortStatDnDataRate for this port reaches/drops below or
exceeds this threshold, a gBondLowDnRateCrossing notification exceeds this threshold, a gBondLowDnRateCrossing notification
MAY be generated if enabled by MAY be generated if enabled by
gBondPortConfLowRateCrossingEnable. gBondPortConfLowRateCrossingEnable.
This object is read-write for the -O subtype G.Bond ports. This object is read-write for the -O subtype G.Bond ports.
It is irrelevant for the -R subtypes - attempts to read or It is irrelevant for the -R subtypes -- attempts to read or
change this object for such ports MUST be rejected (in case of change this object for such ports MUST be rejected (in the case
SNMP with the error inconsistentValue). of SNMP, with the error inconsistentValue).
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupThreshDownUpRate." aGroupThreshLowDownRate."
REFERENCE REFERENCE
"[TR-159] 5.5.1.22" "[TR-159], Section 5.5.1.22"
::= { gBondPortConfEntry 7 } ::= { gBondPortConfEntry 7 }
gBondPortConfLowRateCrossingEnable OBJECT-TYPE gBondPortConfLowRateCrossingEnable OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates whether gBondLowUpRateCrossing and "Indicates whether gBondLowUpRateCrossing and
gBondLowDnRateCrossing notifications should be generated gBondLowDnRateCrossing notifications should be generated
for this interface. for this interface.
Value of true(1) indicates that the notifications are enabled. A value of true(1) indicates that the notifications are
Value of false(2) indicates that the notifications are enabled. A value of false(2) indicates that the notifications
disabled. are disabled.
This object is read-write for the -O subtype G.Bond ports. This object is read-write for the -O subtype G.Bond ports.
It is irrelevant for the -R subtypes - attempts to read or It is irrelevant for the -R subtypes -- attempts to read or
change this object for such ports MUST be rejected (in case of change this object for such ports MUST be rejected (in the case
SNMP with the error inconsistentValue). of SNMP, with the error inconsistentValue).
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupLowRateCrossingEnable." aGroupLowRateCrossingEnable."
REFERENCE REFERENCE
"[TR-159] 5.5.1.23" "[TR-159], Section 5.5.1.23"
::= { gBondPortConfEntry 8 } ::= { gBondPortConfEntry 8 }
gBondPortConfPmTcaConfProfile OBJECT-TYPE gBondPortConfPmTcaConfProfile OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32)) SYNTAX SnmpAdminString (SIZE (1..32))
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The value of this object is the index of the row in the GBS "The value of this object is the index of the row in the GBS
port Alarm Configuration Profile Table for Performance Monitoring Port Alarm Configuration Profile table for Performance Monitoring
Threshold Crossing Alerts - gBondPortAlarmConfProfileTable, Threshold Crossing Alerts -- the gBondPortAlarmConfProfileTable,
which applies to this GBS port." which applies to this GBS port."
DEFVAL { "DEFVAL" } DEFVAL { "DEFVAL" }
::= { gBondPortConfEntry 9 } ::= { gBondPortConfEntry 9 }
gBondPortConfPmTcaEnable OBJECT-TYPE gBondPortConfPmTcaEnable OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates whether gBondPerfTca*Crossing set of notifications "Indicates whether the gBondPerfTca*Crossing set of
should be generated for this interface. notifications should be generated for this interface.
Value of true(1) indicates that the notifications are enabled. A value of true(1) indicates that the notifications are
Value of false(2) indicates that the notifications are disabled. enabled. A value of false(2) indicates that the notifications
are disabled.
This object maps to the TR-159 attribute aGroupPerfTcaEnable." This object maps to the TR-159 attribute aGroupPerfTcaEnable."
REFERENCE REFERENCE
"[TR-159] 5.5.1.38" "[TR-159], Section 5.5.1.38"
::= { gBondPortConfEntry 10 } ::= { gBondPortConfEntry 10 }
gBondPortCapTable OBJECT-TYPE gBondPortCapTable OBJECT-TYPE
SYNTAX SEQUENCE OF GBondPortCapEntry SYNTAX SEQUENCE OF GBondPortCapEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Table for capabilities of G.Bond Ports. Entries in this table "Table for capabilities of G.Bond ports. Entries in this table
MUST be maintained in a persistent manner" MUST be maintained in a persistent manner."
::= { gBondPort 2 } ::= { gBondPort 2 }
gBondPortCapEntry OBJECT-TYPE gBondPortCapEntry OBJECT-TYPE
SYNTAX GBondPortCapEntry SYNTAX GBondPortCapEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry in the G.Bond Port Capability table. "An entry in the G.Bond Port Capability table.
Each entry represents a G.Bond port indexed by the ifIndex. Each entry represents a G.Bond port indexed by the ifIndex.
Note that a G.Bond GBS port runs on top of a single Note that a G.Bond GBS port runs on top of a single
or multiple BCE port(s), which are also indexed by ifIndex." or multiple BCE port(s), which are also indexed by the ifIndex."
INDEX { ifIndex } INDEX { ifIndex }
::= { gBondPortCapTable 1 } ::= { gBondPortCapTable 1 }
GBondPortCapEntry ::= GBondPortCapEntry ::=
SEQUENCE { SEQUENCE {
gBondPortCapSchemesSupported IANAgBondSchemeList, gBondPortCapSchemesSupported IANAgBondSchemeList,
gBondPortCapPeerSchemesSupported IANAgBondSchemeList, gBondPortCapPeerSchemesSupported IANAgBondSchemeList,
gBondPortCapCapacity Unsigned32, gBondPortCapCapacity Unsigned32,
gBondPortCapPeerCapacity Unsigned32 gBondPortCapPeerCapacity Unsigned32
} }
gBondPortCapSchemesSupported OBJECT-TYPE gBondPortCapSchemesSupported OBJECT-TYPE
SYNTAX IANAgBondSchemeList SYNTAX IANAgBondSchemeList
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Bonding Capability of the G.Bond port (GBS). This is a "Bonding capability of the G.Bond port (GBS). This is a
read-only bitmap of the possible bonding schemes supported by read-only bitmap of the possible bonding schemes supported by
the GBS. The various bit-positions are: the GBS. The various bit positions are:
none(0) - GBS is capable of bonding bypass on a none(0) - GBS is capable of bonding bypass on a
single-BCE (G.998.2 only) single-BCE G.998.2 GBS
g9981(1) - GBS is capable of G.998.1 bonding g9981(1) - GBS is capable of G.998.1 bonding
g9982(2) - GBS is capable of G.998.2 bonding g9982(2) - GBS is capable of G.998.2 bonding
g9983(3) - GBS is capable of G.998.3 bonding g9983(3) - GBS is capable of G.998.3 bonding
Note that for ports supporting multiple bonding schemes the Note that for ports supporting multiple bonding schemes, the
actual administrative scheme is set via gBondPortConfAdminScheme actual administrative scheme is set via gBondPortConfAdminScheme
object. The current operating bonding scheme is reflected in object. The current operating bonding scheme is reflected in
the gBondPortStatOperScheme. the gBondPortStatOperScheme object.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupBondSchemesSupported." aGroupBondSchemesSupported."
REFERENCE REFERENCE
"[TR-159] 5.5.1.2" "[TR-159], Section 5.5.1.2"
::= { gBondPortCapEntry 1 } ::= { gBondPortCapEntry 1 }
gBondPortCapPeerSchemesSupported OBJECT-TYPE gBondPortCapPeerSchemesSupported OBJECT-TYPE
SYNTAX IANAgBondSchemeList SYNTAX IANAgBondSchemeList
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Bonding Capability of the peer G.Bond port (GBS). This is a "Bonding capability of the peer G.Bond port (GBS). This is a
read-only bitmap of the possible bonding schemes supported by read-only bitmap of the possible bonding schemes supported by
the link partner GBS. The various bit-positions are: the link partner GBS. The various bit positions are:
none(0) - peer GBS does not support bonding or none(0) - peer GBS does not support bonding, or
the peer unit could not be reached or the peer unit could not be reached, or
peer GBS is capable of bonding bypass on a peer GBS is capable of bonding bypass on a
single-BCE (G.998.2 only) single-BCE G.998.2 GBS
g9981(1) - peer GBS is capable of G.998.1 bonding g9981(1) - peer GBS is capable of G.998.1 bonding
g9982(2) - peer GBS is capable of G.998.2 bonding g9982(2) - peer GBS is capable of G.998.2 bonding
g9983(3) - peer GBS is capable of G.998.3 bonding g9983(3) - peer GBS is capable of G.998.3 bonding
Note that for ports supporting multiple bonding schemes the Note that for ports supporting multiple bonding schemes, the
actual administrative scheme is set via actual administrative scheme is set via the
gBondPortConfPeerAdminScheme object. The current operating gBondPortConfPeerAdminScheme object. The current operating
bonding scheme is reflected in the gBondPortStatPeerOperScheme. bonding scheme is reflected in the gBondPortStatPeerOperScheme
object.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupBondPeerSchemesSupported." aGroupPeerBondSchemesSupported."
REFERENCE REFERENCE
"[TR-159] 5.5.1.3" "[TR-159], Section 5.5.1.3"
::= { gBondPortCapEntry 2 } ::= { gBondPortCapEntry 2 }
gBondPortCapCapacity OBJECT-TYPE gBondPortCapCapacity OBJECT-TYPE
SYNTAX Unsigned32 (1..32) SYNTAX Unsigned32 (1..32)
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Number of BCEs that can be aggregated by the local GBS. "Number of BCEs that can be aggregated by the local GBS.
The number of BCEs currently assigned to a particular G.Bond The number of BCEs currently assigned to a particular G.Bond
port (gBondPortStatNumBCEs) is never greater than port (gBondPortStatNumBCEs) is never greater than
gBondPortCapCapacity. gBondPortCapCapacity.
This object maps to the TR-159 attribute aGroupCapacity." This object maps to the TR-159 attribute aGroupCapacity."
REFERENCE REFERENCE
"[TR-159] 5.5.1.12" "[TR-159], Section 5.5.1.12"
::= { gBondPortCapEntry 3 } ::= { gBondPortCapEntry 3 }
gBondPortCapPeerCapacity OBJECT-TYPE gBondPortCapPeerCapacity OBJECT-TYPE
SYNTAX Unsigned32 (0|1..32) SYNTAX Unsigned32 (0|1..32)
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Number of BCEs that can be aggregated by the peer GBS port. "Number of BCEs that can be aggregated by the peer GBS port.
Value of 0 is returned when peer Bonding Capacity is unknown A value of 0 is returned when peer Bonding capacity is unknown
(peer cannot be reached). (peer cannot be reached).
This object maps to the TR-159 attribute aGroupPeerCapacity." This object maps to the TR-159 attribute aGroupPeerCapacity."
REFERENCE REFERENCE
"[TR-159] 5.5.1.13" "[TR-159], Section 5.5.1.13"
::= { gBondPortCapEntry 4 } ::= { gBondPortCapEntry 4 }
gBondPortStatTable OBJECT-TYPE gBondPortStatTable OBJECT-TYPE
SYNTAX SEQUENCE OF GBondPortStatEntry SYNTAX SEQUENCE OF GBondPortStatEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table provides overall status information of G.Bond "This table provides overall status information of G.Bond
ports, complementing the generic status information from the ports, complementing the generic status information from the
ifTable of IF-MIB. Additional status information about ifTable of the IF-MIB. Additional status information about
connected BCEs is available from the relevant line MIBs connected BCEs is available from the relevant line MIBs.
This table contains live data from the equipment. As such, This table contains live data from the equipment. As such,
it is NOT persistent." it is NOT persistent."
::= { gBondPort 3 } ::= { gBondPort 3 }
gBondPortStatEntry OBJECT-TYPE gBondPortStatEntry OBJECT-TYPE
SYNTAX GBondPortStatEntry SYNTAX GBondPortStatEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry in the G.Bond Port Status table. "An entry in the G.Bond Port Status table.
Each entry represents a G.Bond port indexed by the ifIndex. Each entry represents a G.Bond port indexed by the ifIndex.
Note that a G.Bond GBS port runs on top of a single Note that a G.Bond GBS port runs on top of a single
skipping to change at page 35, line 38 skipping to change at page 37, line 15
::= { gBondPort 3 } ::= { gBondPort 3 }
gBondPortStatEntry OBJECT-TYPE gBondPortStatEntry OBJECT-TYPE
SYNTAX GBondPortStatEntry SYNTAX GBondPortStatEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry in the G.Bond Port Status table. "An entry in the G.Bond Port Status table.
Each entry represents a G.Bond port indexed by the ifIndex. Each entry represents a G.Bond port indexed by the ifIndex.
Note that a G.Bond GBS port runs on top of a single Note that a G.Bond GBS port runs on top of a single
or multiple BCE port(s), which are also indexed by ifIndex." or multiple BCE port(s), which are also indexed by the ifIndex."
INDEX { ifIndex } INDEX { ifIndex }
::= { gBondPortStatTable 1 } ::= { gBondPortStatTable 1 }
GBondPortStatEntry ::= GBondPortStatEntry ::=
SEQUENCE { SEQUENCE {
gBondPortStatOperScheme IANAgBondScheme, gBondPortStatOperScheme IANAgBondScheme,
gBondPortStatPeerOperScheme IANAgBondScheme, gBondPortStatPeerOperScheme IANAgBondScheme,
gBondPortStatUpDataRate Gauge32, gBondPortStatUpDataRate Gauge32,
gBondPortStatDnDataRate Gauge32, gBondPortStatDnDataRate Gauge32,
gBondPortStatFltStatus BITS, gBondPortStatFltStatus BITS,
skipping to change at page 36, line 4 skipping to change at page 37, line 28
GBondPortStatEntry ::= GBondPortStatEntry ::=
SEQUENCE { SEQUENCE {
gBondPortStatOperScheme IANAgBondScheme, gBondPortStatOperScheme IANAgBondScheme,
gBondPortStatPeerOperScheme IANAgBondScheme, gBondPortStatPeerOperScheme IANAgBondScheme,
gBondPortStatUpDataRate Gauge32, gBondPortStatUpDataRate Gauge32,
gBondPortStatDnDataRate Gauge32, gBondPortStatDnDataRate Gauge32,
gBondPortStatFltStatus BITS, gBondPortStatFltStatus BITS,
gBondPortStatSide INTEGER, gBondPortStatSide INTEGER,
gBondPortStatNumBCEs Unsigned32 gBondPortStatNumBCEs Unsigned32
} }
gBondPortStatOperScheme OBJECT-TYPE gBondPortStatOperScheme OBJECT-TYPE
SYNTAX IANAgBondScheme SYNTAX IANAgBondScheme
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Current operating bonding scheme of a G.Bond port. "Current operating bonding scheme of a G.Bond port.
The possible values are: The possible values are:
none(0) - bonding bypass on a single-BCE (G.998.2 only) none(0) - bonding bypass on a single-BCE G.998.2 GBS
g9981(1) - G.998.1 bonding g9981(1) - G.998.1 bonding
g9982(2) - G.998.2 bonding g9982(2) - G.998.2 bonding
g9983(3) - G.998.3 bonding g9983(3) - G.998.3 bonding
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupOperBondScheme." aGroupOperBondScheme."
REFERENCE REFERENCE
"[TR-159] 5.5.1.4" "[TR-159], Section 5.5.1.4"
::= { gBondPortStatEntry 1 } ::= { gBondPortStatEntry 1 }
gBondPortStatPeerOperScheme OBJECT-TYPE gBondPortStatPeerOperScheme OBJECT-TYPE
SYNTAX IANAgBondScheme SYNTAX IANAgBondScheme
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Current operating bonding scheme of a G.Bond port link partner. "Current operating bonding scheme of a G.Bond port link partner.
The possible values are: The possible values are:
unknown(0) - peer cannot be reached due to the link state or unknown(0) - peer cannot be reached due to the link state or
bonding bypass on a single-BCE (G.998.2 only) bonding bypass on a single-BCE G.998.2 GBS
g9981(1) - G.998.1 bonding g9981(1) - G.998.1 bonding
g9982(2) - G.998.2 bonding g9982(2) - G.998.2 bonding
g9983(3) - G.998.3 bonding g9983(3) - G.998.3 bonding
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupPeerOperBondScheme." aGroupPeerOperBondScheme."
REFERENCE REFERENCE
"[TR-159] 5.5.1.5" "[TR-159], Section 5.5.1.5"
::= { gBondPortStatEntry 2 } ::= { gBondPortStatEntry 2 }
gBondPortStatUpDataRate OBJECT-TYPE gBondPortStatUpDataRate OBJECT-TYPE
SYNTAX Gauge32 SYNTAX Gauge32
UNITS "bps" UNITS "bps"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A current G.Bond port operational Data Rate in the upstream "A current G.Bond port operational data rate in the upstream
direction, in bps. direction, in bps.
This object represents an estimation of the sum of individual This object represents an estimation of the sum of individual
BCE upstream data rates, modified to compensate for BCE upstream data rates, modified to compensate for
fragmentation and encapsulation overhead (e.g., for an fragmentation and encapsulation overhead (e.g., for an
Ethernet service, the target data rate of 10Mbps SHALL allow Ethernet service, the target data rate of 10 Mbps SHALL allow
lossless transmission of full-duplex 10Mbps Ethernet frame lossless transmission of full-duplex 10-Mbps Ethernet frame
stream with minimal inter-frame gap). stream with minimal inter-frame gap).
Note that for symmetrical interfaces gBondPortStatUpDataRate == Note that for symmetrical interfaces, gBondPortStatUpDataRate ==
gBondPortStatDnDataRate == ifSpeed. gBondPortStatDnDataRate == ifSpeed.
This object maps to the TR-159 attribute aGroupUpRate." This object maps to the TR-159 attribute aGroupUpRate."
REFERENCE REFERENCE
"[TR-159] 5.5.1.15" "[TR-159], Section 5.5.1.15"
::= { gBondPortStatEntry 3 } ::= { gBondPortStatEntry 3 }
gBondPortStatDnDataRate OBJECT-TYPE gBondPortStatDnDataRate OBJECT-TYPE
SYNTAX Gauge32 SYNTAX Gauge32
UNITS "bps" UNITS "bps"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A current G.Bond port operational Data Rate in the downstream "A current G.Bond port operational data rate in the downstream
direction, in bps. direction, in bps.
This object represents an estimation of the sum of individual This object represents an estimation of the sum of individual
BCE downstream data rates, modified to compensate for BCE downstream data rates, modified to compensate for
fragmentation and encapsulation overhead (e.g., for an fragmentation and encapsulation overhead (e.g., for an
Ethernet service, the target data rate of 10Mbps SHALL allow Ethernet service, the target data rate of 10 Mbps SHALL allow
lossless transmission of full-duplex 10Mbps Ethernet frame lossless transmission of full-duplex 10-Mbps Ethernet frame
stream with minimal inter-frame gap). stream with minimal inter-frame gap).
Note that for symmetrical interfaces gBondPortStatUpDataRate == Note that for symmetrical interfaces, gBondPortStatUpDataRate ==
gBondPortStatDnDataRate == ifSpeed. gBondPortStatDnDataRate == ifSpeed.
This object maps to the TR-159 attribute aGroupDownRate." This object maps to the TR-159 attribute aGroupDownRate."
REFERENCE REFERENCE
"[TR-159] 5.5.1.16" "[TR-159], Section 5.5.1.16"
::= { gBondPortStatEntry 4 } ::= { gBondPortStatEntry 4 }
gBondPortStatFltStatus OBJECT-TYPE gBondPortStatFltStatus OBJECT-TYPE
SYNTAX BITS { SYNTAX BITS {
noPeer(0), noPeer(0),
peerPowerLoss(1), peerPowerLoss(1),
peerBondSchemeMismatch(2), peerBondSchemeMismatch(2),
bceSubTypeMismatch(3), bceSubTypeMismatch(3),
lowRate(4), lowRate(4),
init(5), init(5),
ready(6) ready(6)
} }
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"G.Bond (GBS) port Fault Status. This is a bitmap of possible "G.Bond (GBS) port fault status. This is a bitmap of possible
conditions. The various bit positions are: conditions. The various bit positions are:
noPeer - peer GBS cannot be reached (e.g., noPeer - Peer GBS cannot be reached (e.g.,
no BCEs attached, all BCEs are Down no BCEs attached, all BCEs are
etc.). 'down', etc.).
peerPowerLoss - peer GBS has indicated impending unit peerPowerLoss - Peer GBS has indicated impending unit
failure due to loss of local power failure due to loss of local power
('Dying Gasp'). ('Dying Gasp').
peerBondSchemeMismatch - operating bonding scheme of a peer peerBondSchemeMismatch - Operating bonding scheme of a peer
GBS is different from the local one. GBS is different from the local one.
bceSubTypeMismatch - local BCEs in the aggregation group bceSubTypeMismatch - Local BCEs in the aggregation group
are not of the same sub-type, e.g., are not of the same sub-type, e.g.,
some BCEs in the local device are -O some BCEs in the local device are -O
while others are -R subtype. while others are -R subtype.
lowRate - gBondUpRate/gBondDnRate of the port lowRate - gBondUpRate/gBondDnRate of the port
has reached or dropped below has reached or dropped below
gBondPortConfThreshLowUpRate/ gBondPortConfThreshLowUpRate/
gBondPortConfThreshLowDnRate. gBondPortConfThreshLowDnRate.
init - The link is Initializing, as a result of
ifAdminStatus being set to 'up' for a
particular BCE or a GBS to which the BCE
is connected.
ready - at least one BCE in the aggregation
group is detecting handshake tones.
This object is intended to supplement ifOperStatus object init - The link is initializing, as a result
in IF-MIB. of ifAdminStatus being set to 'up'
for a particular BCE or a GBS
to which the BCE is connected.
ready - At least one BCE in the aggregation
group is detecting handshake tones.
This object is intended to supplement the ifOperStatus object
in the IF-MIB.
This object maps to the TR-159 attribute aGroupStatus." This object maps to the TR-159 attribute aGroupStatus."
REFERENCE REFERENCE
"[TR-159] 5.5.1.9; IF-MIB, ifOperStatus" "[TR-159], Section 5.5.1.9; RFC 2863, IF-MIB, ifOperStatus"
::= { gBondPortStatEntry 5 } ::= { gBondPortStatEntry 5 }
gBondPortStatSide OBJECT-TYPE gBondPortStatSide OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
subscriber(1), subscriber(1),
office(2), office(2),
unknown(3) unknown(3)
} }
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"G.Bond port mode of operation (subtype). "G.Bond port mode of operation (subtype).
The value of 'subscriber' indicates the port is designated as The value of 'subscriber' indicates that the port is
'-R' subtype (all BCEs assigned to this port are of subtype designated as '-R' subtype (all BCEs assigned to this port are of
'-R'). subtype '-R').
The value of the 'office' indicates that the port is The value of 'office' indicates that the port is designated
designated as '-O' subtype (all BCEs assigned to this port are as '-O' subtype (all BCEs assigned to this port are of
of subtype '-O'). subtype '-O').
The value of 'unknown' indicates that the port has no assigned The value of 'unknown' indicates that the port has no assigned
BCEs yet or that the assigned BCEs are not of the same side BCEs yet or that the assigned BCEs are not of the same side
(subTypeBCEMismatch). (subTypeBCEMismatch).
This object maps to the TR-159 attribute aGroupEnd." This object maps to the TR-159 attribute aGroupEnd."
REFERENCE REFERENCE
"[TR-159] 5.5.1.11" "[TR-159], Section 5.5.1.11"
::= { gBondPortStatEntry 6 } ::= { gBondPortStatEntry 6 }
gBondPortStatNumBCEs OBJECT-TYPE gBondPortStatNumBCEs OBJECT-TYPE
SYNTAX Unsigned32 (0..32) SYNTAX Unsigned32 (0..32)
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Number of BCEs that is currently aggregated by the local GBS "Number of BCEs that are currently aggregated by the local GBS
(assigned to the G.Bond port using ifStackTable). (assigned to the G.Bond port using the ifStackTable).
This number is never greater than gBondPortCapCapacity. This number is never greater than gBondPortCapCapacity.
This object SHALL be automatically incremented or decremented This object SHALL be automatically incremented or decremented
when a BCE is added or deleted to/from the G.Bond port using when a BCE is added or deleted to/from the G.Bond port using
ifStackTable. the ifStackTable.
This object maps to the TR-159 attribute aGroupNumChannels" This object maps to the TR-159 attribute aGroupNumChannels."
REFERENCE REFERENCE
"[TR-159] 5.5.1.14" "[TR-159], Section 5.5.1.14"
::= { gBondPortStatEntry 7 } ::= { gBondPortStatEntry 7 }
-- Performance Monitoring group -- Performance Monitoring group
gBondPortPM OBJECT IDENTIFIER ::= { gBondPort 4 } gBondPortPM OBJECT IDENTIFIER ::= { gBondPort 4 }
gBondPortPmCurTable OBJECT-TYPE gBondPortPmCurTable OBJECT-TYPE
SYNTAX SEQUENCE OF GBondPortPmCurEntry SYNTAX SEQUENCE OF GBondPortPmCurEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table contains current Performance Monitoring (PM) "This table contains current Performance Monitoring (PM)
information for a GBS port. This table contains live data from information for a GBS port. This table contains live data from
the equipment and as such is NOT persistent." the equipment and as such is NOT persistent."
::= { gBondPortPM 1 } ::= { gBondPortPM 1 }
gBondPortPmCurEntry OBJECT-TYPE gBondPortPmCurEntry OBJECT-TYPE
SYNTAX GBondPortPmCurEntry SYNTAX GBondPortPmCurEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry in the G.Bond Port PM table. "An entry in the G.Bond Port PM table.
Each entry represents a G.Bond port indexed by the ifIndex. Each entry represents a G.Bond port indexed by the ifIndex.
Note that a G.Bond GBS port runs on top of a single Note that a G.Bond GBS port runs on top of a single
or multiple BCE port(s), which are also indexed by ifIndex." or multiple BCE port(s), which are also indexed by the ifIndex."
INDEX { ifIndex } INDEX { ifIndex }
::= { gBondPortPmCurTable 1 } ::= { gBondPortPmCurTable 1 }
GBondPortPmCurEntry ::= GBondPortPmCurEntry ::=
SEQUENCE { SEQUENCE {
gBondPortPmCurES HCPerfTotalCount, gBondPortPmCurES HCPerfTotalCount,
gBondPortPmCurSES HCPerfTotalCount, gBondPortPmCurSES HCPerfTotalCount,
gBondPortPmCurUAS HCPerfTotalCount, gBondPortPmCurUAS HCPerfTotalCount,
gBondPortPmCur15MinValidIntervals HCPerfValidIntervals, gBondPortPmCur15MinValidIntervals HCPerfValidIntervals,
gBondPortPmCur15MinInvalidIntervals HCPerfInvalidIntervals, gBondPortPmCur15MinInvalidIntervals HCPerfInvalidIntervals,
skipping to change at page 40, line 44 skipping to change at page 42, line 22
SYNTAX HCPerfTotalCount SYNTAX HCPerfTotalCount
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A count of Errored Seconds (ES) on the GBS since the BTU was "A count of Errored Seconds (ES) on the GBS since the BTU was
last restarted. last restarted.
An Errored Second for a G.998.x interface is defined as a count An Errored Second for a G.998.x interface is defined as a count
of 1-second intervals during which one or more GBS errors are of 1-second intervals during which one or more GBS errors are
declared. The errors are specific for each bonding scheme, e.g. declared. The errors are specific for each bonding scheme, e.g.,
- lost cells for the ATM bonding; - lost cells for the ATM bonding
- lost or discarded (due to an error or a buffer overflow) - lost or discarded (due to an error or a buffer overflow)
fragments for the Ethernet bonding; fragments for the Ethernet bonding
- CRC4, CRC6 or CRC8 errors for the TDIM bonding - CRC-4, CRC-6, or CRC-8 errors for the TDIM bonding
This object is inhibited during Unavailable Seconds (UAS). This object is inhibited during Unavailable Seconds (UAS).
This object maps to the TR-159 attribute aGroupPerfES." This object maps to the TR-159 attribute aGroupPerfES."
REFERENCE REFERENCE
"[TR-159] 5.5.1.29" "[TR-159], Section 5.5.1.29"
::= { gBondPortPmCurEntry 1 } ::= { gBondPortPmCurEntry 1 }
gBondPortPmCurSES OBJECT-TYPE gBondPortPmCurSES OBJECT-TYPE
SYNTAX HCPerfTotalCount SYNTAX HCPerfTotalCount
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A count of Severely Errored Seconds (SES) on the GBS since the "A count of Severely Errored Seconds (SES) on the GBS
BTU was last restarted. since the BTU was last restarted.
A Severely Errored Second for a G.998.x interface is defined as A Severely Errored Second for a G.998.x interface is defined as
a count of 1-second intervals during which GBS errors cause at a count of 1-second intervals during which GBS errors cause at
least 1% traffic loss of the nominal bonded link rate or at least 1% traffic loss of the nominal bonded link rate or at
least 12ms for the TDM traffic. The exact definition is specific least 12 ms for the TDM traffic. The exact definition is
for each bonding scheme, e.g. specific for each bonding scheme, e.g.,
- 234 lost cells for the ATM bonding with 10Mbps nominal link - 234 lost cells for the ATM bonding with 10-Mbps nominal link
rate rate
- 60 lost/discarded fragments for the Ethernet bonding with - 60 lost/discarded fragments for the Ethernet bonding with
10Mbps nominal link rate and fixed 192 Byte-long fragment 10-Mbps nominal link rate and fixed 192-byte-long fragment
size. size
- 6 or more CRC4, one or more CRC6 or one or more CRC8 errors - 6 or more CRC-4 errors, one or more CRC-6 errors, or one or
for the TDM bonding more CRC-8 errors for the TDM bonding
This object is inhibited during Unavailable Seconds (UAS). This object is inhibited during Unavailable Seconds (UAS).
This object maps to the TR-159 attribute aGroupPerfSES." This object maps to the TR-159 attribute aGroupPerfSES."
REFERENCE REFERENCE
"[TR-159] 5.5.1.30" "[TR-159], Section 5.5.1.30"
::= { gBondPortPmCurEntry 2 } ::= { gBondPortPmCurEntry 2 }
gBondPortPmCurUAS OBJECT-TYPE gBondPortPmCurUAS OBJECT-TYPE
SYNTAX HCPerfTotalCount SYNTAX HCPerfTotalCount
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A count of Unavailable Seconds (UAS) on the GBS since the BTU "A count of Unavailable Seconds (UAS) on the GBS since the BTU
was last restarted. was last restarted.
An Unavailable Second for a G.998.x interface is defined as a An Unavailable Second for a G.998.x interface is defined as a
count of 1-second intervals during which the bonded link is count of 1-second intervals during which the bonded link is
unavailable. The G.998.x link becomes unavailable at the onset unavailable. The G.998.x link becomes unavailable at the onset
of 10 contiguous SESs. The 10 SESs are included in the of 10 contiguous SESs. The 10 SESs are included in the
unavailable time. Once unavailable, the G.998.x line becomes unavailable time. Once unavailable, the G.998.x line becomes
available at the onset of 10 contiguous seconds with no SESs. available at the onset of 10 contiguous seconds with no SESs.
The 10 seconds with no SESs are excluded from unavailable time. The 10 seconds with no SESs are excluded from the unavailable
time.
This object maps to the TR-159 attribute aGroupPerfUAS." This object maps to the TR-159 attribute aGroupPerfUAS."
REFERENCE REFERENCE
"[TR-159] 5.5.1.31" "[TR-159], Section 5.5.1.31"
::= { gBondPortPmCurEntry 3 } ::= { gBondPortPmCurEntry 3 }
gBondPortPmCur15MinValidIntervals OBJECT-TYPE gBondPortPmCur15MinValidIntervals OBJECT-TYPE
SYNTAX HCPerfValidIntervals SYNTAX HCPerfValidIntervals
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A number of 15-minute intervals for which data was collected. "A number of 15-minute intervals for which data was collected.
The value of this object will be 96 or the maximum number of The value of this object will be 96 or the maximum number of
15-minute history intervals collected by the implementation 15-minute history intervals collected by the implementation,
unless the measurement was (re-)started recently, in which case unless the measurement was (re)started recently, in which case
the value will be the number of complete 15 minutes intervals the value will be the number of complete 15-minute intervals
for which there are at least some data. for which there are at least some data.
In certain cases it is possible that some intervals are
unavailable. In this case, this object reports the maximum In certain cases, it is possible that some intervals are
unavailable. In this case, this object reports the maximum
interval number for which data is available. interval number for which data is available.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupPerf15MinValidIntervals." aGroupPerf15MinValidIntervals."
REFERENCE REFERENCE
"[TR-159] 5.5.1.32" "[TR-159], Section 5.5.1.32"
::= { gBondPortPmCurEntry 4 } ::= { gBondPortPmCurEntry 4 }
gBondPortPmCur15MinInvalidIntervals OBJECT-TYPE gBondPortPmCur15MinInvalidIntervals OBJECT-TYPE
SYNTAX HCPerfInvalidIntervals SYNTAX HCPerfInvalidIntervals
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A number of 15-minute intervals for which data was not always "A number of 15-minute intervals for which data was not always
available. The value will typically be zero except in cases available. The value will typically be zero, except in cases
where the data for some intervals are not available. where the data for some intervals are not available.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupPerf15MinInvalidIntervals." aGroupPerf15MinInvalidIntervals."
REFERENCE REFERENCE
"[TR-159] 5.5.1.33" "[TR-159], Section 5.5.1.33"
::= { gBondPortPmCurEntry 5 } ::= { gBondPortPmCurEntry 5 }
gBondPortPmCur15MinTimeElapsed OBJECT-TYPE gBondPortPmCur15MinTimeElapsed OBJECT-TYPE
SYNTAX HCPerfTimeElapsed SYNTAX HCPerfTimeElapsed
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A count of seconds that have elapsed since the beginning of the "A count of seconds that have elapsed since the beginning of the
current 15-minute performance interval. current 15-minute performance interval.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupPerfCurr15MinTimeElapsed." aGroupPerfCurr15MinTimeElapsed."
REFERENCE REFERENCE
"[TR-159] 5.5.1.34" "[TR-159], Section 5.5.1.34"
::= { gBondPortPmCurEntry 6 } ::= { gBondPortPmCurEntry 6 }
gBondPortPmCur15MinES OBJECT-TYPE gBondPortPmCur15MinES OBJECT-TYPE
SYNTAX HCPerfCurrentCount SYNTAX HCPerfCurrentCount
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A count of Errored Seconds (ES) on the GBS in the current "A count of Errored Seconds (ES) on the GBS in the current
15-minute performance interval. 15-minute performance interval.
This object maps to the TR-159 attribute aGroupPerfCurr15MinES." This object maps to the TR-159 attribute aGroupPerfCurr15MinES."
REFERENCE REFERENCE
"[TR-159] 5.5.1.35" "[TR-159], Section 5.5.1.35"
::= { gBondPortPmCurEntry 7 } ::= { gBondPortPmCurEntry 7 }
gBondPortPmCur15MinSES OBJECT-TYPE gBondPortPmCur15MinSES OBJECT-TYPE
SYNTAX HCPerfCurrentCount SYNTAX HCPerfCurrentCount
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A count of Severely Errored Seconds (ES) on the GBS in the "A count of Severely Errored Seconds (SES) on the GBS in the
current 15-minute performance interval. current 15-minute performance interval.
This object maps to the TR-159 attribute aGroupPerfCurr15MinSES." This object maps to the TR-159 attribute aGroupPerfCurr15MinSES."
REFERENCE REFERENCE
"[TR-159] 5.5.1.36" "[TR-159], Section 5.5.1.36"
::= { gBondPortPmCurEntry 8 } ::= { gBondPortPmCurEntry 8 }
gBondPortPmCur15MinUAS OBJECT-TYPE gBondPortPmCur15MinUAS OBJECT-TYPE
SYNTAX HCPerfCurrentCount SYNTAX HCPerfCurrentCount
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A count of Unavailable Seconds (UAS) on the GBS in the current "A count of Unavailable Seconds (UAS) on the GBS in the current
15-minute performance interval. 15-minute performance interval.
This object maps to the TR-159 attribute aGroupPerfCurr15MinUAS." This object maps to the TR-159 attribute aGroupPerfCurr15MinUAS."
REFERENCE REFERENCE
"[TR-159] 5.5.1.37" "[TR-159], Section 5.5.1.37"
::= { gBondPortPmCurEntry 9 } ::= { gBondPortPmCurEntry 9 }
gBondPortPmCur1DayValidIntervals OBJECT-TYPE gBondPortPmCur1DayValidIntervals OBJECT-TYPE
SYNTAX Unsigned32 (0..7) SYNTAX Unsigned32 (0..7)
UNITS "days" UNITS "days"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A number of 1-day intervals for which data was collected. "A number of 1-day intervals for which data was collected.
The value of this object will be 7 or the maximum number of The value of this object will be 7 or the maximum number of
1-day history intervals collected by the implementation unless 1-day history intervals collected by the implementation, unless
the measurement was (re-)started recently, in which case the the measurement was (re)started recently, in which case the
value will be the number of complete 1-day intervals for which value will be the number of complete 1-day intervals for which
there are at least some data. there are at least some data.
In certain cases it is possible that some intervals are In certain cases, it is possible that some intervals are
unavailable. In this case, this object reports the maximum unavailable. In this case, this object reports the maximum
interval number for which data is available. interval number for which data is available.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupPerf1DayValidIntervals." aGroupPerf1DayValidIntervals."
REFERENCE REFERENCE
"[TR-159] 5.5.1.45" "[TR-159], Section 5.5.1.45"
::= { gBondPortPmCurEntry 10 } ::= { gBondPortPmCurEntry 10 }
gBondPortPmCur1DayInvalidIntervals OBJECT-TYPE gBondPortPmCur1DayInvalidIntervals OBJECT-TYPE
SYNTAX Unsigned32 (0..7) SYNTAX Unsigned32 (0..7)
UNITS "days" UNITS "days"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A number of 1-day intervals for which data was not always "A number of 1-day intervals for which data was not always
available. The value will typically be zero except in cases available. The value will typically be zero, except in cases
where the data for some intervals are not available. where the data for some intervals are not available.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupPerf1DayInvalidIntervals." aGroupPerf1DayInvalidIntervals."
REFERENCE REFERENCE
"[TR-159] 5.5.1.46" "[TR-159], Section 5.5.1.46"
::= { gBondPortPmCurEntry 11 } ::= { gBondPortPmCurEntry 11 }
gBondPortPmCur1DayTimeElapsed OBJECT-TYPE gBondPortPmCur1DayTimeElapsed OBJECT-TYPE
SYNTAX HCPerfTimeElapsed SYNTAX HCPerfTimeElapsed
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A count of seconds that have elapsed since the beginning of "A count of seconds that have elapsed since the beginning of
the current 1-day performance interval. the current 1-day performance interval.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupPerfCurr1DayTimeElapsed." aGroupPerfCurr1DayTimeElapsed."
REFERENCE REFERENCE
"[TR-159] 5.5.1.47" "[TR-159], Section 5.5.1.47"
::= { gBondPortPmCurEntry 12 } ::= { gBondPortPmCurEntry 12 }
gBondPortPmCur1DayES OBJECT-TYPE gBondPortPmCur1DayES OBJECT-TYPE
SYNTAX HCPerfCurrentCount SYNTAX HCPerfCurrentCount
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A count of Errored Seconds (ES) on the GBS in the current 1-day "A count of Errored Seconds (ES) on the GBS in the current 1-day
performance interval. performance interval.
skipping to change at page 45, line 21 skipping to change at page 47, line 4
gBondPortPmCur1DayES OBJECT-TYPE gBondPortPmCur1DayES OBJECT-TYPE
SYNTAX HCPerfCurrentCount SYNTAX HCPerfCurrentCount
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A count of Errored Seconds (ES) on the GBS in the current 1-day "A count of Errored Seconds (ES) on the GBS in the current 1-day
performance interval. performance interval.
This object maps to the TR-159 attribute aGroupPerfCurr1DayES." This object maps to the TR-159 attribute aGroupPerfCurr1DayES."
REFERENCE REFERENCE
"[TR-159] 5.5.1.48" "[TR-159], Section 5.5.1.48"
::= { gBondPortPmCurEntry 13 } ::= { gBondPortPmCurEntry 13 }
gBondPortPmCur1DaySES OBJECT-TYPE gBondPortPmCur1DaySES OBJECT-TYPE
SYNTAX HCPerfCurrentCount SYNTAX HCPerfCurrentCount
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A count of Severely Errored Seconds (ES) on the GBS in the "A count of Severely Errored Seconds (SES) on the GBS in the
current 1-day performance interval. current 1-day performance interval.
This object maps to the TR-159 attribute aGroupPerfCurr1DaySES." This object maps to the TR-159 attribute aGroupPerfCurr1DaySES."
REFERENCE REFERENCE
"[TR-159] 5.5.1.49" "[TR-159], Section 5.5.1.49"
::= { gBondPortPmCurEntry 14 } ::= { gBondPortPmCurEntry 14 }
gBondPortPmCur1DayUAS OBJECT-TYPE gBondPortPmCur1DayUAS OBJECT-TYPE
SYNTAX HCPerfCurrentCount SYNTAX HCPerfCurrentCount
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A count of Unavailable Seconds (UAS) on the GBS in the current "A count of Unavailable Seconds (UAS) on the GBS in the current
1-day performance interval. 1-day performance interval.
This object maps to the TR-159 attribute aGroupPerfCurr1DayUAS." This object maps to the TR-159 attribute aGroupPerfCurr1DayUAS."
REFERENCE REFERENCE
"[TR-159] 5.5.1.50" "[TR-159], Section 5.5.1.50"
::= { gBondPortPmCurEntry 15 } ::= { gBondPortPmCurEntry 15 }
-- PM history: 15-min buckets -- PM history: 15-min buckets
gBondPortPm15MinTable OBJECT-TYPE gBondPortPm15MinTable OBJECT-TYPE
SYNTAX SEQUENCE OF GBondPortPm15MinEntry SYNTAX SEQUENCE OF GBondPortPm15MinEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table contains historical 15-minute buckets of Performance "This table contains historical 15-minute buckets of Performance
skipping to change at page 46, line 24 skipping to change at page 48, line 7
interval, up to 96 intervals). interval, up to 96 intervals).
Entries in this table MUST be maintained in a persistent manner." Entries in this table MUST be maintained in a persistent manner."
::= { gBondPortPM 2 } ::= { gBondPortPM 2 }
gBondPortPm15MinEntry OBJECT-TYPE gBondPortPm15MinEntry OBJECT-TYPE
SYNTAX GBondPortPm15MinEntry SYNTAX GBondPortPm15MinEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry in the G.Bond Port historical 15-minute PM table. "An entry in the G.Bond Port historical 15-minute PM table.
Each entry represents performance monitoring data for a GBS port, Each entry represents Performance Monitoring data for a GBS port,
indexed by ifIndex, collected during a particular 15-minute indexed by the ifIndex, collected during a particular 15-minute
interval, indexed by gBondPortPm15MinIntervalIndex." interval, indexed by the gBondPortPm15MinIntervalIndex."
INDEX { ifIndex, gBondPortPm15MinIntervalIndex } INDEX { ifIndex, gBondPortPm15MinIntervalIndex }
::= { gBondPortPm15MinTable 1 } ::= { gBondPortPm15MinTable 1 }
GBondPortPm15MinEntry ::= GBondPortPm15MinEntry ::=
SEQUENCE { SEQUENCE {
gBondPortPm15MinIntervalIndex Unsigned32, gBondPortPm15MinIntervalIndex Unsigned32,
gBondPortPm15MinIntervalMoniTime HCPerfTimeElapsed, gBondPortPm15MinIntervalMoniTime HCPerfTimeElapsed,
gBondPortPm15MinIntervalES HCPerfIntervalCount, gBondPortPm15MinIntervalES HCPerfIntervalCount,
gBondPortPm15MinIntervalSES HCPerfIntervalCount, gBondPortPm15MinIntervalSES HCPerfIntervalCount,
gBondPortPm15MinIntervalUAS HCPerfIntervalCount, gBondPortPm15MinIntervalUAS HCPerfIntervalCount,
gBondPortPm15MinIntervalValid TruthValue gBondPortPm15MinIntervalValid TruthValue
} }
gBondPortPm15MinIntervalIndex OBJECT-TYPE gBondPortPm15MinIntervalIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..96) SYNTAX Unsigned32 (1..96)
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Performance Data Interval number. 1 is the most recent previous "Performance data interval number. 1 is the most recent
interval; interval 96 is 24 hours ago. previous interval; interval 96 is 24 hours ago.
Intervals 2..96 are OPTIONAL. Intervals 2..96 are OPTIONAL.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupPerf15MinIntervalNumber." aGroupPerf15MinIntervalNumber."
REFERENCE REFERENCE
"[TR-159] 5.5.1.57" "[TR-159], Section 5.5.1.57"
::= { gBondPortPm15MinEntry 1 } ::= { gBondPortPm15MinEntry 1 }
gBondPortPm15MinIntervalMoniTime OBJECT-TYPE gBondPortPm15MinIntervalMoniTime OBJECT-TYPE
SYNTAX HCPerfTimeElapsed SYNTAX HCPerfTimeElapsed
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A count of seconds over which the performance data was actually "A count of seconds over which the performance data was actually
monitored. This value will be the same as the interval duration monitored. This value will be the same as the interval duration
(900 seconds), except in a situation where performance data (900 seconds), except in a situation where performance data
could not be collected for any reason." could not be collected for any reason."
::= { gBondPortPm15MinEntry 2 } ::= { gBondPortPm15MinEntry 2 }
gBondPortPm15MinIntervalES OBJECT-TYPE gBondPortPm15MinIntervalES OBJECT-TYPE
SYNTAX HCPerfIntervalCount SYNTAX HCPerfIntervalCount
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A count of Errored Seconds (ES) on the GBS in the 15-minute "A count of Errored Seconds (ES) on the GBS in the 15-minute
performance history interval. performance history interval.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupPerf15MinIntervalES." aGroupPerf15MinIntervalES."
REFERENCE REFERENCE
"[TR-159] 5.5.1.59" "[TR-159], Section 5.5.1.59"
::= { gBondPortPm15MinEntry 3 } ::= { gBondPortPm15MinEntry 3 }
gBondPortPm15MinIntervalSES OBJECT-TYPE gBondPortPm15MinIntervalSES OBJECT-TYPE
SYNTAX HCPerfIntervalCount SYNTAX HCPerfIntervalCount
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A count of Severely Errored Seconds (ES) on the GBS in the "A count of Severely Errored Seconds (SES) on the GBS in the
15-minute performance history interval. 15-minute performance history interval.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupPerf15MinIntervalSES." aGroupPerf15MinIntervalSES."
REFERENCE REFERENCE
"[TR-159] 5.5.1.60" "[TR-159], Section 5.5.1.60"
::= { gBondPortPm15MinEntry 4 } ::= { gBondPortPm15MinEntry 4 }
gBondPortPm15MinIntervalUAS OBJECT-TYPE gBondPortPm15MinIntervalUAS OBJECT-TYPE
SYNTAX HCPerfIntervalCount SYNTAX HCPerfIntervalCount
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A count of Unavailable Seconds (UAS) on the GBS in the current "A count of Unavailable Seconds (UAS) on the GBS in the current
15-minute performance interval. 15-minute performance interval.
This object maps to the TR-159 attribute aGroupPerfCurr15MinUAS." This object maps to the TR-159 attribute
aGroupPerf15MinIntervalUAS."
REFERENCE REFERENCE
"[TR-159] 5.5.1.61" "[TR-159], Section 5.5.1.61"
::= { gBondPortPm15MinEntry 5 } ::= { gBondPortPm15MinEntry 5 }
gBondPortPm15MinIntervalValid OBJECT-TYPE gBondPortPm15MinIntervalValid OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only object indicating whether or not this history "A read-only object indicating whether or not this history
bucket contains valid data. Valid bucket is reported as true(1) bucket contains valid data. A valid bucket is reported as
and invalid bucket as false(2). true(1) and an invalid bucket as false(2).
If this history bucket is invalid the BTU-C MUST NOT produce If this history bucket is invalid, the BTU-C MUST NOT produce
notifications based upon the value of the counters in this notifications based upon the value of the counters in this
bucket. bucket.
Note that an implementation may decide not to store invalid Note that an implementation may decide not to store invalid
history buckets in its data base. In such case this object is history buckets in its database. In such a case, this object
not required as only valid history buckets are available while is not required, as only valid history buckets are available
invalid history buckets are simply not in the data base. while invalid history buckets are simply not in the database.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupPerf15MinIntervalValid." aGroupPerf15MinIntervalValid."
REFERENCE REFERENCE
"[TR-159] 5.5.1.58" "[TR-159], Section 5.5.1.58"
::= { gBondPortPm15MinEntry 6 } ::= { gBondPortPm15MinEntry 6 }
-- PM history: 1-day buckets -- PM history: 1-day buckets
gBondPortPm1DayTable OBJECT-TYPE gBondPortPm1DayTable OBJECT-TYPE
SYNTAX SEQUENCE OF GBondPortPm1DayEntry SYNTAX SEQUENCE OF GBondPortPm1DayEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table contains historical 1-day buckets of Performance "This table contains historical 1-day buckets of Performance
skipping to change at page 49, line 7 skipping to change at page 50, line 42
interval, up to 7 intervals). interval, up to 7 intervals).
Entries in this table MUST be maintained in a persistent manner." Entries in this table MUST be maintained in a persistent manner."
::= { gBondPortPM 3 } ::= { gBondPortPM 3 }
gBondPortPm1DayEntry OBJECT-TYPE gBondPortPm1DayEntry OBJECT-TYPE
SYNTAX GBondPortPm1DayEntry SYNTAX GBondPortPm1DayEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry in the G.Bond Port historical 1-day PM table. "An entry in the G.Bond Port historical 1-day PM table.
Each entry represents performance monitoring data for a GBS port, Each entry represents Performance Monitoring data for a GBS port,
indexed by ifIndex, collected during a particular 1-day indexed by the ifIndex, collected during a particular 1-day
interval, indexed by gBondPortPm1DayIntervalIndex." interval, indexed by the gBondPortPm1DayIntervalIndex."
INDEX { ifIndex, gBondPortPm1DayIntervalIndex } INDEX { ifIndex, gBondPortPm1DayIntervalIndex }
::= { gBondPortPm1DayTable 1 } ::= { gBondPortPm1DayTable 1 }
GBondPortPm1DayEntry ::= GBondPortPm1DayEntry ::=
SEQUENCE { SEQUENCE {
gBondPortPm1DayIntervalIndex Unsigned32, gBondPortPm1DayIntervalIndex Unsigned32,
gBondPortPm1DayIntervalMoniTime HCPerfTimeElapsed, gBondPortPm1DayIntervalMoniTime HCPerfTimeElapsed,
gBondPortPm1DayIntervalES HCPerfIntervalCount, gBondPortPm1DayIntervalES HCPerfIntervalCount,
gBondPortPm1DayIntervalSES HCPerfIntervalCount, gBondPortPm1DayIntervalSES HCPerfIntervalCount,
gBondPortPm1DayIntervalUAS HCPerfIntervalCount, gBondPortPm1DayIntervalUAS HCPerfIntervalCount,
gBondPortPm1DayIntervalValid TruthValue gBondPortPm1DayIntervalValid TruthValue
} }
gBondPortPm1DayIntervalIndex OBJECT-TYPE gBondPortPm1DayIntervalIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..7) SYNTAX Unsigned32 (1..7)
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Performance Data Interval number. 1 is the most recent previous "Performance data interval number. 1 is the most recent
interval; interval 7 is 7 days ago. previous interval; interval 7 is 7 days ago.
Intervals 2..7 are OPTIONAL. Intervals 2..7 are OPTIONAL.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupPerf1DayIntervalNumber." aGroupPerf1DayIntervalNumber."
REFERENCE REFERENCE
"[TR-159] 5.5.1.62" "[TR-159], Section 5.5.1.62"
::= { gBondPortPm1DayEntry 1 } ::= { gBondPortPm1DayEntry 1 }
gBondPortPm1DayIntervalMoniTime OBJECT-TYPE gBondPortPm1DayIntervalMoniTime OBJECT-TYPE
SYNTAX HCPerfTimeElapsed SYNTAX HCPerfTimeElapsed
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A count of seconds over which the performance data was actually "A count of seconds over which the performance data was actually
monitored. This value will be the same as the interval duration monitored. This value will be the same as the interval duration
(86400 seconds), except in a situation where performance data (86400 seconds), except in a situation where performance data
could not be collected for any reason. could not be collected for any reason.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupPerf1DayIntervalMoniSecs." aGroupPerf1DayIntervalMoniSecs."
REFERENCE REFERENCE
"[TR-159] 5.5.1.64" "[TR-159], Section 5.5.1.64"
::= { gBondPortPm1DayEntry 2 } ::= { gBondPortPm1DayEntry 2 }
gBondPortPm1DayIntervalES OBJECT-TYPE gBondPortPm1DayIntervalES OBJECT-TYPE
SYNTAX HCPerfIntervalCount SYNTAX HCPerfIntervalCount
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A count of Errored Seconds (ES) on the GBS in the 1-day "A count of Errored Seconds (ES) on the GBS in the 1-day
performance history interval. performance history interval.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupPerf1DayIntervalES." aGroupPerf1DayIntervalES."
REFERENCE REFERENCE
"[TR-159] 5.5.1.65" "[TR-159], Section 5.5.1.65"
::= { gBondPortPm1DayEntry 3 } ::= { gBondPortPm1DayEntry 3 }
gBondPortPm1DayIntervalSES OBJECT-TYPE gBondPortPm1DayIntervalSES OBJECT-TYPE
SYNTAX HCPerfIntervalCount SYNTAX HCPerfIntervalCount
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A count of Severely Errored Seconds (ES) on the GBS in the "A count of Severely Errored Seconds (SES) on the GBS in the
1-day performance history interval. 1-day performance history interval.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupPerf1DayIntervalSES." aGroupPerf1DayIntervalSES."
REFERENCE REFERENCE
"[TR-159] 5.5.1.66" "[TR-159], Section 5.5.1.66"
::= { gBondPortPm1DayEntry 4 } ::= { gBondPortPm1DayEntry 4 }
gBondPortPm1DayIntervalUAS OBJECT-TYPE gBondPortPm1DayIntervalUAS OBJECT-TYPE
SYNTAX HCPerfIntervalCount SYNTAX HCPerfIntervalCount
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A count of Unavailable Seconds (UAS) on the GBS in the current "A count of Unavailable Seconds (UAS) on the GBS in the current
1-day performance interval. 1-day performance interval.
This object maps to the TR-159 attribute aGroupPerfCurr1DayUAS." This object maps to the TR-159 attribute
aGroupPerf1DayIntervalUAS."
REFERENCE REFERENCE
"[TR-159] 5.5.1.67" "[TR-159], Section 5.5.1.67"
::= { gBondPortPm1DayEntry 5 } ::= { gBondPortPm1DayEntry 5 }
gBondPortPm1DayIntervalValid OBJECT-TYPE gBondPortPm1DayIntervalValid OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A read-only object indicating whether or not this history "A read-only object indicating whether or not this history
bucket contains valid data. Valid bucket is reported as true(1) bucket contains valid data. A valid bucket is reported as
and invalid bucket as false(2). true(1) and an invalid bucket as false(2).
If this history bucket is invalid the BTU-C MUST NOT produce If this history bucket is invalid, the BTU-C MUST NOT produce
notifications based upon the value of the counters in this notifications based upon the value of the counters in this
bucket. bucket.
Note that an implementation may decide not to store invalid Note that an implementation may decide not to store invalid
history buckets in its data base. In such case this object is history buckets in its database. In such a case, this object
not required as only valid history buckets are available while is not required, as only valid history buckets are available
invalid history buckets are simply not in the data base. while invalid history buckets are simply not in the database.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupPerf1DayIntervalValid." aGroupPerf1DayIntervalValid."
REFERENCE REFERENCE
"[TR-159] 5.5.1.63" "[TR-159], Section 5.5.1.63"
::= { gBondPortPm1DayEntry 6 } ::= { gBondPortPm1DayEntry 6 }
-- Performance Monitoring TCA Configuration profile -- Performance Monitoring TCA Configuration profile
gBondPortPmTcaProfileTable OBJECT-TYPE gBondPortPmTcaProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF GBondPortPmTcaProfileEntry SYNTAX SEQUENCE OF GBondPortPmTcaProfileEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table supports definitions of Performance Monitoring (PM) "This table supports definitions of Performance Monitoring (PM)
Threshold Crossing Alerts (TCA) configuration profiles for GBS Threshold Crossing Alert (TCA) configuration profiles for GBS
ports. ports.
Entries in this table MUST be maintained in a persistent manner." Entries in this table MUST be maintained in a persistent manner."
::= { gBondPortPM 4 } ::= { gBondPortPM 4 }
gBondPortPmTcaProfileEntry OBJECT-TYPE gBondPortPmTcaProfileEntry OBJECT-TYPE
SYNTAX GBondPortPmTcaProfileEntry SYNTAX GBondPortPmTcaProfileEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry in the GBS PM TCA Configuration table. "An entry in the GBS PM TCA Configuration table.
Each entry corresponds to a single TCA configuration profile. Each entry corresponds to a single TCA configuration profile.
Each profile contains a set of parameters for setting alarm Each profile contains a set of parameters for setting alarm
thresholds for various performance attributes monitored at GBS thresholds for various performance attributes monitored at GBS
ports. Profiles may be created/deleted using the row ports. Profiles may be created/deleted using the row
creation/deletion mechanism via creation/deletion mechanism via
gBondPortPmTcaProfileRowStatus. If an active entry is gBondPortPmTcaProfileRowStatus. If an active entry is
referenced via gBondPortConfPmTcaConfProfile, the entry MUST referenced via gBondPortConfPmTcaConfProfile, the entry MUST
remain active until all references are removed. remain active until all references are removed.
A default profile with an index of 'DEFVAL', will always exist A default profile with an index of 'DEFVAL' will always exist,
and its parameters will be set to vendor specific values, and its parameters will be set to vendor-specific values
unless otherwise specified in this document." unless otherwise specified in this document."
INDEX { gBondPortPmTcaProfileName } INDEX { gBondPortPmTcaProfileName }
::= { gBondPortPmTcaProfileTable 1 } ::= { gBondPortPmTcaProfileTable 1 }
GBondPortPmTcaProfileEntry ::= GBondPortPmTcaProfileEntry ::=
SEQUENCE { SEQUENCE {
gBondPortPmTcaProfileName SnmpAdminString, gBondPortPmTcaProfileName SnmpAdminString,
gBondPortPmTcaProfileThresh15MinES HCPerfIntervalThreshold, gBondPortPmTcaProfileThresh15MinES HCPerfIntervalThreshold,
gBondPortPmTcaProfileThresh15MinSES HCPerfIntervalThreshold, gBondPortPmTcaProfileThresh15MinSES HCPerfIntervalThreshold,
gBondPortPmTcaProfileThresh15MinUAS HCPerfIntervalThreshold, gBondPortPmTcaProfileThresh15MinUAS HCPerfIntervalThreshold,
gBondPortPmTcaProfileThresh1DayES GBondPm1DayIntervalThreshold, gBondPortPmTcaProfileThresh1DayES GBondPm1DayIntervalThreshold,
gBondPortPmTcaProfileThresh1DaySES GBondPm1DayIntervalThreshold, gBondPortPmTcaProfileThresh1DaySES GBondPm1DayIntervalThreshold,
gBondPortPmTcaProfileThresh1DayUAS GBondPm1DayIntervalThreshold, gBondPortPmTcaProfileThresh1DayUAS GBondPm1DayIntervalThreshold,
gBondPortPmTcaProfileRowStatus RowStatus gBondPortPmTcaProfileRowStatus RowStatus
} }
gBondPortPmTcaProfileName OBJECT-TYPE gBondPortPmTcaProfileName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32)) SYNTAX SnmpAdminString (SIZE (1..32))
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object is a unique index (name) associated with this "This object is a unique index (name) associated with this
GBS PM TCA profile." GBS PM TCA profile."
::= { gBondPortPmTcaProfileEntry 1 } ::= { gBondPortPmTcaProfileEntry 1 }
gBondPortPmTcaProfileThresh15MinES OBJECT-TYPE gBondPortPmTcaProfileThresh15MinES OBJECT-TYPE
SYNTAX HCPerfIntervalThreshold SYNTAX HCPerfIntervalThreshold
UNITS "seconds" UNITS "seconds"
skipping to change at page 52, line 46 skipping to change at page 54, line 40
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A desired threshold for the number of Errored Seconds (ES) "A desired threshold for the number of Errored Seconds (ES)
within any given 15-minute performance data collection interval. within any given 15-minute performance data collection interval.
If the number of ESs in a particular 15-minute collection If the number of ESs in a particular 15-minute collection
interval reaches or exceeds this value, a interval reaches or exceeds this value, a
gBondPmTca15MinESCrossing notification MAY be generated if gBondPmTca15MinESCrossing notification MAY be generated if
enabled by gBondPortConfPmTcaEnable. enabled by gBondPortConfPmTcaEnable.
At most one notification can be sent per interval. At most one notification can be sent per interval.
Setting this attribute to zero (default) effectively disables Setting this attribute to zero (default) effectively disables
gBondPmTca15MinESCrossing notification. the gBondPmTca15MinESCrossing notification.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupPerfThreshold15MinES." aGroupPerfThreshold15MinES."
REFERENCE REFERENCE
"[TR-159] 5.5.1.39" "[TR-159], Section 5.5.1.39"
::= { gBondPortPmTcaProfileEntry 2 } ::= { gBondPortPmTcaProfileEntry 2 }
gBondPortPmTcaProfileThresh15MinSES OBJECT-TYPE gBondPortPmTcaProfileThresh15MinSES OBJECT-TYPE
SYNTAX HCPerfIntervalThreshold SYNTAX HCPerfIntervalThreshold
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A desired threshold for the number of Severely Errored Seconds "A desired threshold for the number of Severely Errored Seconds
(SES) within any given 15-minute performance data collection (SES) within any given 15-minute performance data collection
interval. interval.
If the number of SESs in a particular 15-minute collection If the number of SESs in a particular 15-minute collection
interval reaches or exceeds this value, a interval reaches or exceeds this value, a
gBondPmTca15MinSESCrossing notification MAY be generated if gBondPmTca15MinSESCrossing notification MAY be generated if
enabled by gBondPortConfPmTcaEnable. enabled by gBondPortConfPmTcaEnable.
At most one notification can be sent per interval. At most one notification can be sent per interval.
Setting this attribute to zero (default) effectively disables Setting this attribute to zero (default) effectively disables
gBondPmTca15MinSESCrossing notification. the gBondPmTca15MinSESCrossing notification.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupPerfThreshold15MinSES." aGroupPerfThreshold15MinSES."
REFERENCE REFERENCE
"[TR-159] 5.5.1.40" "[TR-159], Section 5.5.1.40"
::= { gBondPortPmTcaProfileEntry 3 } ::= { gBondPortPmTcaProfileEntry 3 }
gBondPortPmTcaProfileThresh15MinUAS OBJECT-TYPE gBondPortPmTcaProfileThresh15MinUAS OBJECT-TYPE
SYNTAX HCPerfIntervalThreshold SYNTAX HCPerfIntervalThreshold
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A desired threshold for the number of Unavailable Seconds (UAS) "A desired threshold for the number of Unavailable Seconds (UAS)
within any given 15-minute performance data collection interval. within any given 15-minute performance data collection interval.
If the number of UASs in a particular 15-minute collection If the number of UASs in a particular 15-minute collection
interval reaches or exceeds this value, a interval reaches or exceeds this value, a
gBondPmTca15MinUASCrossing notification MAY be generated if gBondPmTca15MinUASCrossing notification MAY be generated if
enabled by gBondPortConfPmTcaEnable. enabled by gBondPortConfPmTcaEnable.
At most one notification can be sent per interval. At most one notification can be sent per interval.
Setting this attribute to zero (default) effectively disables Setting this attribute to zero (default) effectively disables
gBondPmTca15MinUASCrossing notification. the gBondPmTca15MinUASCrossing notification.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupPerfThreshold15MinUAS." aGroupPerfThreshold15MinUAS."
REFERENCE REFERENCE
"[TR-159] 5.5.1.41" "[TR-159], Section 5.5.1.41"
::= { gBondPortPmTcaProfileEntry 4 } ::= { gBondPortPmTcaProfileEntry 4 }
gBondPortPmTcaProfileThresh1DayES OBJECT-TYPE gBondPortPmTcaProfileThresh1DayES OBJECT-TYPE
SYNTAX GBondPm1DayIntervalThreshold SYNTAX GBondPm1DayIntervalThreshold
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A desired threshold for the number of Errored Seconds (ES) "A desired threshold for the number of Errored Seconds (ES)
within any given 1-day performance data collection interval. within any given 1-day performance data collection interval.
skipping to change at page 54, line 11 skipping to change at page 56, line 4
::= { gBondPortPmTcaProfileEntry 4 } ::= { gBondPortPmTcaProfileEntry 4 }
gBondPortPmTcaProfileThresh1DayES OBJECT-TYPE gBondPortPmTcaProfileThresh1DayES OBJECT-TYPE
SYNTAX GBondPm1DayIntervalThreshold SYNTAX GBondPm1DayIntervalThreshold
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A desired threshold for the number of Errored Seconds (ES) "A desired threshold for the number of Errored Seconds (ES)
within any given 1-day performance data collection interval. within any given 1-day performance data collection interval.
If the number of ESs in a particular 1-day collection interval If the number of ESs in a particular 1-day collection interval
reaches or exceeds this value, a gBondPmTca1DayESCrossing reaches or exceeds this value, a gBondPmTca1DayESCrossing
notification MAY be generated if enabled by notification MAY be generated if enabled by
gBondPortConfPmTcaEnable. gBondPortConfPmTcaEnable.
At most one notification can be sent per interval. At most one notification can be sent per interval.
Setting this attribute to zero (default) effectively disables Setting this attribute to zero (default) effectively disables
gBondPmTca1DayESCrossing notification. the gBondPmTca1DayESCrossing notification.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupPerfThreshold1DayES." aGroupPerfThreshold1DayES."
REFERENCE REFERENCE
"[TR-159] 5.5.1.51" "[TR-159], Section 5.5.1.51"
::= { gBondPortPmTcaProfileEntry 5 } ::= { gBondPortPmTcaProfileEntry 5 }
gBondPortPmTcaProfileThresh1DaySES OBJECT-TYPE gBondPortPmTcaProfileThresh1DaySES OBJECT-TYPE
SYNTAX GBondPm1DayIntervalThreshold SYNTAX GBondPm1DayIntervalThreshold
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A desired threshold for the number of Severely Errored Seconds "A desired threshold for the number of Severely Errored Seconds
(SES) within any given 1-day performance data collection (SES) within any given 1-day performance data collection
interval. interval.
If the number of SESs in a particular 1-day collection interval If the number of SESs in a particular 1-day collection interval
reaches or exceeds this value, a gBondPmTca1DaySESCrossing reaches or exceeds this value, a gBondPmTca1DaySESCrossing
notification MAY be generated if enabled by notification MAY be generated if enabled by
gBondPortConfPmTcaEnable. gBondPortConfPmTcaEnable.
At most one notification can be sent per interval. At most one notification can be sent per interval.
Setting this attribute to zero (default) effectively disables Setting this attribute to zero (default) effectively disables
gBondPmTca1DaySESCrossing notification. the gBondPmTca1DaySESCrossing notification.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupPerfThreshold1DaySES." aGroupPerfThreshold1DaySES."
REFERENCE REFERENCE
"[TR-159] 5.5.1.52" "[TR-159], Section 5.5.1.52"
::= { gBondPortPmTcaProfileEntry 6 } ::= { gBondPortPmTcaProfileEntry 6 }
gBondPortPmTcaProfileThresh1DayUAS OBJECT-TYPE gBondPortPmTcaProfileThresh1DayUAS OBJECT-TYPE
SYNTAX GBondPm1DayIntervalThreshold SYNTAX GBondPm1DayIntervalThreshold
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A desired threshold for the number of Unavailable Seconds (UAS) "A desired threshold for the number of Unavailable Seconds (UAS)
within any given 1-day performance data collection interval. within any given 1-day performance data collection interval.
If the number of UASs in a particular 1-day collection interval If the number of UASs in a particular 1-day collection interval
reaches or exceeds this value, a gBondPmTca1DayUASCrossing reaches or exceeds this value, a gBondPmTca1DayUASCrossing
notification MAY be generated if enabled by notification MAY be generated if enabled by
gBondPortConfPmTcaEnable. gBondPortConfPmTcaEnable.
At most one notification can be sent per interval. At most one notification can be sent per interval.
Setting this attribute to zero (default) effectively disables Setting this attribute to zero (default) effectively disables
gBondPmTca1DayUASCrossing notification. the gBondPmTca1DayUASCrossing notification.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aGroupPerfThreshold1DayUAS." aGroupPerfThreshold1DayUAS."
REFERENCE REFERENCE
"[TR-159] 5.5.1.53" "[TR-159], Section 5.5.1.53"
::= { gBondPortPmTcaProfileEntry 7 } ::= { gBondPortPmTcaProfileEntry 7 }
gBondPortPmTcaProfileRowStatus OBJECT-TYPE gBondPortPmTcaProfileRowStatus OBJECT-TYPE
SYNTAX RowStatus SYNTAX RowStatus
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object controls the creation, modification, or deletion "This object controls the creation, modification, or deletion
of the associated entry in the gBondPortPmTcaProfileTable of the associated entry in the gBondPortPmTcaProfileTable
per the semantics of RowStatus. per the semantics of RowStatus.
If an 'active' entry is referenced via If an 'active' entry is referenced via
gBondPortConfPmTcaConfProfile instance(s), the entry MUST gBondPortConfPmTcaConfProfile instance(s), the entry MUST
remain 'active'. remain 'active'.
An 'active' entry SHALL NOT be modified. In order to modify an An 'active' entry SHALL NOT be modified. In order to modify an
existing entry, it MUST be taken out of service (by setting existing entry, it MUST be taken out of service (by setting
this object to 'notInService'), modified, and set 'active' this object to 'notInService'), modified, and set to 'active'
again." again."
::= { gBondPortPmTcaProfileEntry 8 } ::= { gBondPortPmTcaProfileEntry 8 }
-- The BCE group -- The BCE group
gBondBceConfTable OBJECT-TYPE gBondBceConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF GBondBceConfEntry SYNTAX SEQUENCE OF GBondBceConfEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Table for Configuration of G.Bond common aspects for the "Table for configuration of G.Bond common aspects for the
Bonding Channel Entity (BCE) ports (modems/channels). Bonding Channel Entity (BCE) ports (modems/channels).
Entries in this table MUST be maintained in a persistent Entries in this table MUST be maintained in a persistent
manner." manner."
::= { gBondBce 1 } ::= { gBondBce 1 }
gBondBceConfEntry OBJECT-TYPE gBondBceConfEntry OBJECT-TYPE
SYNTAX GBondBceConfEntry SYNTAX GBondBceConfEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry in the G.Bond BCE Configuration table. "An entry in the G.Bond BCE Configuration table.
Each entry represents common aspects of a G.Bond BCE port Each entry represents common aspects of a G.Bond BCE port
indexed by the ifIndex. Note that a G.Bond BCE port can be indexed by the ifIndex. Note that a G.Bond BCE port can be
stacked below a single GBS port, also indexed by ifIndex, stacked below a single GBS port, also indexed by the ifIndex,
possibly together with other BCE ports if GAF is enabled." possibly together with other BCE ports if bonding is enabled."
INDEX { ifIndex } INDEX { ifIndex }
::= { gBondBceConfTable 1 } ::= { gBondBceConfTable 1 }
GBondBceConfEntry ::= GBondBceConfEntry ::=
SEQUENCE { SEQUENCE {
gBondBceConfRemoteDiscoveryCode PhysAddress gBondBceConfRemoteDiscoveryCode PhysAddress
} }
gBondBceConfRemoteDiscoveryCode OBJECT-TYPE gBondBceConfRemoteDiscoveryCode OBJECT-TYPE
SYNTAX PhysAddress (SIZE(0|6)) SYNTAX PhysAddress (SIZE (0|6))
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A Remote Discovery Code of the BCE port at CO. "A remote discovery code of the BCE port at the CO.
A 6 octet long Discovery Code of the peer GBS connected via A 6-octet-long discovery code of the peer GBS connected via
the BCE. the BCE.
Reading this object results in a Discovery Get operation. Reading this object results in a Discovery Get operation.
Setting this object to all zeroes results in a Discovery Setting this object to all zeroes results in a Discovery
Clear_if_Same operation (the value of gBondPortConfDiscoveryCode Clear_if_Same operation (the value of gBondPortConfDiscoveryCode
at the peer GBS SHALL be the same as gBondPortConfDiscoveryCode at the peer GBS SHALL be the same as gBondPortConfDiscoveryCode
of the local GBS associated with the BCE for the operation to of the local GBS associated with the BCE for the operation to
succeed). succeed).
Writing a non-zero value to this object results in a Writing a non-zero value to this object results in a
Discovery Set_if_Clear operation. Discovery Set_if_Clear operation.
A zero-length octet string SHALL be returned on an attempt to A zero-length octet string SHALL be returned on an attempt to
read this object when GAF aggregation is not enabled. read this object when bonding is not enabled.
This object is irrelevant in BCE-R port subtypes (CPE side): This object is irrelevant in BCE-R port subtypes (CPE side):
in this case a zero length octet string SHALL be returned on in this case, a zero-length octet string SHALL be returned on
an attempt to read this object, an attempt to change this object an attempt to read this object. An attempt to change this
MUST be rejected (in case of SNMP with the error object MUST be rejected (in the case of SNMP, with the error
inconsistentValue). inconsistentValue).
Discovery MUST be performed when the link is Down. Discovery MUST be performed when the link is 'down'.
Attempts to change this object MUST be rejected (in the case of
Attempts to change this object MUST be rejected (in case of SNMP, with the error inconsistentValue), If the link is 'up' or
SNMP with the error inconsistentValue), If the link is Up or initializing.
Initializing.
This object maps to the TR-159 attribute This object maps to the TR-159 attribute
aLineRemoteDiscoveryCode." aLineRemoteDiscoveryCode."
REFERENCE REFERENCE
"[TR-159] 5.5.6.7" "[TR-159], Section 5.5.6.7"
::= { gBondBceConfEntry 1 } ::= { gBondBceConfEntry 1 }
-- --
-- Conformance Statements -- Conformance Statements
-- --
gBondGroups OBJECT IDENTIFIER ::= { gBondConformance 1 } gBondGroups OBJECT IDENTIFIER ::= { gBondConformance 1 }
gBondCompliances OBJECT IDENTIFIER ::= { gBondConformance 2 } gBondCompliances OBJECT IDENTIFIER ::= { gBondConformance 2 }
skipping to change at page 59, line 32 skipping to change at page 61, line 27
gBondPortPm15MinIntervalMoniTime, gBondPortPm15MinIntervalMoniTime,
gBondPortPm15MinIntervalES, gBondPortPm15MinIntervalES,
gBondPortPm15MinIntervalSES, gBondPortPm15MinIntervalSES,
gBondPortPm15MinIntervalUAS, gBondPortPm15MinIntervalUAS,
gBondPortPm15MinIntervalValid gBondPortPm15MinIntervalValid
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A collection of objects supporting OPTIONAL historical "A collection of objects supporting OPTIONAL historical
Performance Monitoring information for G.Bond ports, during Performance Monitoring information for G.Bond ports, during
previous 15-minute intervals ." previous 15-minute intervals."
::= { gBondGroups 7 } ::= { gBondGroups 7 }
gBondPm1DayGroup OBJECT-GROUP gBondPm1DayGroup OBJECT-GROUP
OBJECTS { OBJECTS {
gBondPortPm1DayIntervalMoniTime, gBondPortPm1DayIntervalMoniTime,
gBondPortPm1DayIntervalES, gBondPortPm1DayIntervalES,
gBondPortPm1DayIntervalSES, gBondPortPm1DayIntervalSES,
gBondPortPm1DayIntervalUAS, gBondPortPm1DayIntervalUAS,
gBondPortPm1DayIntervalValid gBondPortPm1DayIntervalValid
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A collection of objects supporting OPTIONAL historical "A collection of objects supporting OPTIONAL historical
Performance Monitoring information for G.Bond ports, during Performance Monitoring information for G.Bond ports, during
previous 1-day intervals ." previous 1-day intervals."
::= { gBondGroups 8 } ::= { gBondGroups 8 }
gBondPmTcaConfGroup OBJECT-GROUP gBondPmTcaConfGroup OBJECT-GROUP
OBJECTS { OBJECTS {
gBondPortConfPmTcaConfProfile, gBondPortConfPmTcaConfProfile,
gBondPortConfPmTcaEnable, gBondPortConfPmTcaEnable,
gBondPortPmTcaProfileThresh15MinES, gBondPortPmTcaProfileThresh15MinES,
gBondPortPmTcaProfileThresh15MinSES, gBondPortPmTcaProfileThresh15MinSES,
gBondPortPmTcaProfileThresh15MinUAS, gBondPortPmTcaProfileThresh15MinUAS,
gBondPortPmTcaProfileThresh1DayES, gBondPortPmTcaProfileThresh1DayES,
skipping to change at page 60, line 32 skipping to change at page 62, line 27
NOTIFICATIONS { NOTIFICATIONS {
gBondPmTca15MinESCrossing, gBondPmTca15MinESCrossing,
gBondPmTca15MinSESCrossing, gBondPmTca15MinSESCrossing,
gBondPmTca15MinUASCrossing, gBondPmTca15MinUASCrossing,
gBondPmTca1DayESCrossing, gBondPmTca1DayESCrossing,
gBondPmTca1DaySESCrossing, gBondPmTca1DaySESCrossing,
gBondPmTca1DayUASCrossing gBondPmTca1DayUASCrossing
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This group supports notifications of performance monitoring "This group supports notifications of Performance Monitoring
thresholds crossing alerts associated with G.Bond ports." Threshold Crossing Alerts associated with G.Bond ports."
::= { gBondGroups 10 } ::= { gBondGroups 10 }
-- Compliance Statements -- Compliance Statements
gBondCompliance MODULE-COMPLIANCE gBondCompliance MODULE-COMPLIANCE
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The compliance statement for G.Bond interfaces. "The compliance statement for G.Bond interfaces.
Compliance with the following external compliance statements Compliance with the following external compliance statements
is REQUIRED: is REQUIRED:
skipping to change at page 61, line 20 skipping to change at page 63, line 15
MODULE -- this module MODULE -- this module
MANDATORY-GROUPS { MANDATORY-GROUPS {
gBondBasicGroup, gBondBasicGroup,
gBondTcaConfGroup, gBondTcaConfGroup,
gBondTcaNotificationGroup gBondTcaNotificationGroup
} }
GROUP gBondDiscoveryGroup GROUP gBondDiscoveryGroup
DESCRIPTION DESCRIPTION
"Support for this group is only required for implementations "Support for this group is only required for implementations
supporting G.Bond Discovery function." supporting the G.Bond Discovery function."
GROUP gBondMultiSchemeGroup GROUP gBondMultiSchemeGroup
DESCRIPTION DESCRIPTION
"Support for this group is only required for implementations "Support for this group is only required for implementations
supporting multiple bonding schemes." supporting multiple bonding schemes."
GROUP gBondPmCurGroup GROUP gBondPmCurGroup
DESCRIPTION DESCRIPTION
"Support for this group is only required for implementations "Support for this group is only required for implementations
supporting Performance Monitoring." supporting Performance Monitoring."
GROUP gBondPm15MinGroup GROUP gBondPm15MinGroup
DESCRIPTION DESCRIPTION
"Support for this group is only required for implementations "Support for this group is only required for implementations
supporting 15-min historical Performance Monitoring." supporting 15-minute historical Performance Monitoring."
GROUP gBondPm1DayGroup GROUP gBondPm1DayGroup
DESCRIPTION DESCRIPTION
"Support for this group is only required for implementations "Support for this group is only required for implementations
supporting 1-day historical Performance Monitoring." supporting 1-day historical Performance Monitoring."
GROUP gBondPmTcaConfGroup GROUP gBondPmTcaConfGroup
DESCRIPTION DESCRIPTION
"Support for this group is only required for implementations "Support for this group is only required for implementations
supporting Performance Monitoring Threshold Crossing Alert supporting Performance Monitoring Threshold Crossing Alert
skipping to change at page 62, line 8 skipping to change at page 63, line 52
GROUP gBondPmTcaNotificationGroup GROUP gBondPmTcaNotificationGroup
DESCRIPTION DESCRIPTION
"Support for this group is only required for implementations "Support for this group is only required for implementations
supporting Performance Monitoring Threshold Crossing Alert supporting Performance Monitoring Threshold Crossing Alert
notifications." notifications."
OBJECT gBondPortCapSchemesSupported OBJECT gBondPortCapSchemesSupported
SYNTAX IANAgBondSchemeList SYNTAX IANAgBondSchemeList
DESCRIPTION DESCRIPTION
"Support for all bonding Schemes types is not required. "Support for all bonding scheme types is not required.
However at least one value SHALL be supported"
However, at least one value SHALL be supported."
OBJECT gBondPortCapPeerSchemesSupported OBJECT gBondPortCapPeerSchemesSupported
SYNTAX IANAgBondSchemeList SYNTAX IANAgBondSchemeList
DESCRIPTION DESCRIPTION
"Support for all bonding Schemes types is not required. "Support for all bonding scheme types is not required.
However at least one value SHALL be supported" However, at least one value SHALL be supported."
::= { gBondCompliances 1 } ::= { gBondCompliances 1 }
END END
7. IANA-Maintained G.Bond TC Definitions
7. IANA-maintained G.Bond TC Definitions The IANA-GBOND-TC-MIB module IMPORTS objects from SNMPv2-SMI
[RFC2578] and SNMPv2-TC [RFC2579].
IANA-GBOND-TC-MIB DEFINITIONS ::= BEGIN IANA-GBOND-TC-MIB DEFINITIONS ::= BEGIN
IMPORTS IMPORTS
MODULE-IDENTITY, MODULE-IDENTITY,
mib-2 mib-2
FROM SNMPv2-SMI FROM SNMPv2-SMI
TEXTUAL-CONVENTION TEXTUAL-CONVENTION
FROM SNMPv2-TC FROM SNMPv2-TC
; ;
------------------------------------------------------------------------ ------------------------------------------------------------------------
ianaGBondTcMIB MODULE-IDENTITY ianaGBondTcMIB MODULE-IDENTITY
LAST-UPDATED "201207160000Z" -- July 16, 2012 LAST-UPDATED "201302200000Z" -- 20 February 2013
ORGANIZATION "IANA" ORGANIZATION "IANA"
CONTACT-INFO " Internet Assigned Numbers Authority CONTACT-INFO " Internet Assigned Numbers Authority
Postal: ICANN Postal: ICANN
4676 Admiralty Way, Suite 330 12025 Waterfront Drive, Suite 300
Marina del Rey, CA 90292 Los Angeles, CA 90094-2536
Tel: +1-310-823-9358 Tel: +1-310-301-5800
EMail: iana@iana.org" EMail: iana@iana.org"
DESCRIPTION DESCRIPTION
"This MIB module defines IANAgBondScheme and IANAgBondSchemeList "This MIB module defines IANAgBondScheme and IANAgBondSchemeList
TEXTUAL-CONVENTIONs, specifying enumerated values of the TEXTUAL-CONVENTIONs, specifying enumerated values of the
gBondPortConfAdminScheme, gBondPortConfPeerAdminScheme, gBondPortConfAdminScheme, gBondPortConfPeerAdminScheme,
gBondPortStatOperScheme, gBondPortStatPeerOperScheme and gBondPortStatOperScheme, gBondPortStatPeerOperScheme,
gBondPortCapSchemesSupported, gBondPortCapPeerSchemesSupported gBondPortCapSchemesSupported, and gBondPortCapPeerSchemesSupported
objects respectively, defined in the GBOND-MIB. objects, respectively, as defined in the GBOND-MIB.
It is intended that each new bonding scheme defined by the It is intended that each new bonding scheme defined by the
ITU-T Q4/SG15 working group and approved for publication in a ITU-T Q4/SG15 working group and approved for publication in a
revision of ITU-T G.998 specification will be added to this MIB revision of the ITU-T G.998 specification will be added to this
module, provided that it is suitable for being managed by the base MIB module, provided that it is suitable for being managed by the
objects in the GBOND-MIB. An Expert Review, as defined in base objects in the GBOND-MIB. An Expert Review, as defined in
RFC 5226 [RFC5226], is REQUIRED for such additions. RFC 5226, is REQUIRED for such additions.
The following references are used throughout this MIB module: The following references are used throughout this MIB module:
[G.998.1] refers to: [G.998.1] refers to:
ITU-T Recommendation G.998.1: 'ATM-based multi-pair bonding', ITU-T Recommendation G.998.1: 'ATM-based multi-pair bonding',
January 2005. January 2005.
[G.998.2] refers to: [G.998.2] refers to:
ITU-T Recommendation G.998.2: 'Ethernet-based multi-pair ITU-T Recommendation G.998.2: 'Ethernet-based multi-pair
bonding', January 2005. bonding', January 2005.
[G.998.3] refers to: [G.998.3] refers to:
ITU-T Recommendation G.998.3: 'Multi-pair bonding using ITU-T Recommendation G.998.3: 'Multi-pair bonding using
time-division inverse multiplexing', January 2005. time-division inverse multiplexing', January 2005.
Naming Conventions: Naming Conventions:
BCE - Bonding Channel Entity BCE - Bonding Channel Entity
GBS - Generic Bonding Sublayer GBS - Generic Bonding Sub-layer
These references should be updated as appropriate when a new These references should be updated as appropriate when a new
bonding scheme is added to this MIB module. bonding scheme is added to this MIB module.
Copyright (C) The IETF Trust (2012). Copyright (c) 2013 IETF Trust and the persons identified as
The initial version of this MIB module was published in authors of the code. All rights reserved.
RFC XXXX; for full legal notices see the RFC itself.
Supplementary information may be available at:
http://www.ietf.org/copyrights/ianamib.html"
REVISION "201207160000Z" -- Jul 16, 2012
DESCRIPTION "Initial version, published as RFC XXXX."
-- EdNote: Replace XXXX with the actual RFC number & Redistribution and use in source and binary forms, with or without
-- remove this note modification, is permitted pursuant to, and subject to the license
terms contained in, the Simplified BSD License set forth in
Section 4.c of the IETF Trust's Legal Provisions Relating to IETF
Documents (http://trustee.ietf.org/license-info)."
::= { mib-2 ZZZ } REVISION "201302200000Z" -- 20 February 2013
DESCRIPTION "Initial version, published as RFC 6765."
-- EdNote: Replace ZZZ with a real OID once it is ::= { mib-2 215 }
-- allocated & remove this note.
-- Textual Conventions -- Textual Conventions
IANAgBondSchemeList ::= TEXTUAL-CONVENTION IANAgBondSchemeList ::= TEXTUAL-CONVENTION
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This textual convention defines a bitmap of possible ITU-T "This textual convention defines a bitmap of possible ITU-T
G.998 (G.Bond) bonding schemes. Currently the following values G.998 (G.Bond) bonding schemes. Currently, the following values
are defined for the corresponding bonding schemes: are defined for the corresponding bonding schemes:
g9981(1) - G.998.1, (G.Bond/ATM, see G9981-MIB) g9981(1) - G.998.1 (G.Bond/ATM; see the G9981-MIB)
g9982(2) - G.998.2, (G.Bond/Ethernet, see G9982-MIB) g9982(2) - G.998.2 (G.Bond/Ethernet; see the G9982-MIB)
g9983(3) - G.998.3, (G.Bond/TDIM, see G9983-MIB) g9983(3) - G.998.3 (G.Bond/TDIM; see the G9983-MIB)
An additional value of none(0), can be returned as a result An additional value of none(0) can be returned as a result
of GET operation, when an value of the object cannot be of a GET operation when a value of the object cannot be
determined (for example a peer GBS cannot be reached), the port determined (for example, a peer GBS cannot be reached), the port
does not support any kind of bonding or when a single-BCE does not support any kind of bonding, or when a single-BCE
G.998.2 GBS supports bonding (frame fragmentation/reassembly) G.998.2 GBS supports bonding (frame fragmentation/reassembly)
bypass." bypass."
SYNTAX BITS {
SYNTAX BITS {
none(0), none(0),
g9981(1), g9981(1),
g9982(2), g9982(2),
g9983(3) g9983(3)
} }
IANAgBondScheme ::= TEXTUAL-CONVENTION IANAgBondScheme ::= TEXTUAL-CONVENTION
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This textual convention defines ITU-T G.998 bonding scheme "This textual convention defines ITU-T G.998 bonding scheme
values. Possible values are: values. Possible values are:
none(0) - no bonding (e.g. on single-BCE G.998.2 GBS) or none(0) - no bonding (e.g., on a single-BCE G.998.2 GBS)
unknown or unknown
g9981(1) - G.998.1 (G.Bond/ATM) g9981(1) - G.998.1 (G.Bond/ATM)
g9982(2) - G.998.2 (G.Bond/Ethernet) g9982(2) - G.998.2 (G.Bond/Ethernet)
g9983(3) - G.998.3 (G.Bond/TDIM)." g9983(3) - G.998.3 (G.Bond/TDIM)"
SYNTAX INTEGER { SYNTAX INTEGER {
none(0), none(0),
g9981(1), g9981(1),
g9982(2), g9982(2),
g9983(3) g9983(3)
} }
END END
8. Security Considerations 8. Security Considerations
There is a number of managed objects defined in this MIB module with There are a number of management objects defined in this MIB module
a MAX-ACCESS clause of read-write and/or read-create. Such objects with a MAX-ACCESS clause of read-write and/or read-create. Such
may be considered sensitive or vulnerable in some network objects may be considered sensitive or vulnerable in some network
environments. The support for SET operations in a non-secure environments. The support for SET operations in a non-secure
environment without proper protection can have a negative effect on environment without proper protection can have a negative effect on
network operations. These are the tables and objects and their network operations. These are the tables and objects and their
sensitivity/vulnerability: sensitivity/vulnerability:
o Changing of gBondPortConfAdminScheme may lead to a potential o Changing of the gBondPortConfAdminScheme object may lead to a
locking of the link, if the peer device does not support desired potential locking of the link, if the peer device does not support
bonding scheme. the desired bonding scheme.
o Changing of gBondPortConfDiscoveryCode, before the discovery o Changing of the gBondPortConfDiscoveryCode object, before the
operation, may lead to a wrongful discovery, for example when two discovery operation, may lead to a wrongful discovery -- for
CO ports are connected to the same multi-channel RT port, while example, when two CO ports are connected to the same multi-channel
both CO ports have the same discovery register value. RT port, while both CO ports have the same discovery register
value.
o Changing of target upstream/downstream data rate via o Changing of the target upstream/downstream data rate via
gBondPortConfTargetUpDataRate/gBondPortConfTargetDnDataRate may gBondPortConfTargetUpDataRate/gBondPortConfTargetDnDataRate may
lead to anything from link quality and rate degradation to a lead to anything from degradation of link quality and data rate to
complete link initialization failure, as ability of a G.Bond port a complete link initialization failure, as the ability of a G.Bond
to support a particular configuration depends on the copper port to support a particular configuration depends on the copper
environment. environment.
o Activation of a specific line/channel may cause a severe o Activation of a specific line/channel may cause a severe
degradation of service for another G.Bond port, whose channel(s) degradation of service for another G.Bond port, whose channel(s)
may be affected by the cross-talk from the newly activated may be affected by the cross-talk from the newly activated
channel. channel.
o Removal of a channel from an operationally 'up' G.Bond port, o Removal of a channel from an operationally 'up' G.Bond port,
aggregating several channels, may cause port's rate degradation aggregating several channels, may cause degradation of the port's
data rate.
Some of the readable objects in this MIB module (i.e., those with Some of the readable objects in this MIB module (i.e., those with
MAX-ACCESS other than not-accessible) may be considered sensitive or MAX-ACCESS other than not-accessible) may be considered sensitive or
vulnerable in some network environments since, collectively, they vulnerable in some network environments since, collectively, they
provide information about the performance of network interfaces and provide information about the performance of network interfaces and
can reveal some aspects of their configuration. can reveal some aspects of their configuration.
In particular, since a bonded xDSL port can be comprised of multiple In particular, since a bonded xDSL port can be comprised of multiple
Unshielded Twisted Pair (UTP) voice grade copper, located in the same Unshielded Twisted Pair (UTP) voice-grade copper, located in the same
bundle with other pairs belonging to another operator/customer, it is bundle with other pairs belonging to another operator/customer, it is
theoretically possible to eavesdrop to a G.Bond transmission, simply theoretically possible to eavesdrop on a G.Bond transmission, simply
by "listening" to a cross-talk from the bonded pairs, especially if by "listening" to cross-talk from the bonded pairs, especially if the
the operating parameters of the G.Bond link in question are known. operating parameters of the G.Bond link in question are known.
It is thus important to control even GET and/or NOTIFY access to It is thus important to control even GET and/or NOTIFY access to
these objects and possibly even encrypt the values of these objects these objects and possibly to even encrypt the values of these
when sending them over the network via SNMP. These are the tables objects when sending them over the network via SNMP. These are the
and objects and their sensitivity/vulnerability: tables and objects and their sensitivity/vulnerability:
o gBondPortStatTable - objects in this table provide status o gBondPortStatTable - objects in this table provide status
information for the G.Bond port, which may aid in identification information for the G.Bond port, which may aid in identification
of the pairs belonging to the bonded port and eavesdroping to the of the pairs belonging to the bonded port and eavesdropping on the
traffic over that port. traffic over that port.
SNMP versions prior to SNMPv3 did not include adequate security. SNMP versions prior to SNMPv3 did not include adequate security.
Even if the network itself is secure (for example by using IPsec),
Even if the network itself is secure (for example by using IPSec),
there is no control as to who on the secure network is allowed to there is no control as to who on the secure network is allowed to
access and GET/SET (read/change/create/delete) the objects in this access and GET/SET (read/change/create/delete) the objects in this
MIB module. MIB module.
Implementations MUST provide the security features described by the Implementations SHOULD provide the security features described by the
SNMPv3 framework (see [RFC3410]), including full support for SNMPv3 framework (see [RFC3410]), and implementations claiming
compliance to the SNMPv3 standard MUST include full support for
authentication and privacy via the User-based Security Model (USM) authentication and privacy via the User-based Security Model (USM)
[RFC3414] with the AES cipher algorithm [RFC3826]. Implementations [RFC3414] with the AES cipher algorithm [RFC3826]. Implementations
MAY also provide support for the Transport Security Model (TSM) MAY also provide support for the Transport Security Model (TSM)
[RFC5591] in combination with a secure transport such as SSH [RFC5591] in combination with a secure transport such as SSH
[RFC5592] or TLS/DTLS [RFC6353]. [RFC5592] or TLS/DTLS [RFC6353].
Further, deployment of SNMP versions prior to SNMPv3 is NOT Further, deployment of SNMP versions prior to SNMPv3 is NOT
RECOMMENDED. Instead, it is RECOMMENDED to deploy SNMPv3 and to RECOMMENDED. Instead, it is RECOMMENDED to deploy SNMPv3 and to
enable cryptographic security. It is then a customer/operator enable cryptographic security. It is then a customer/operator
responsibility to ensure that the SNMP entity giving access to an responsibility to ensure that the SNMP entity giving access to an
instance of this MIB module is properly configured to give access to instance of this MIB module is properly configured to give access to
the objects only to those principals (users) that have legitimate the objects only to those principals (users) that have legitimate
rights to indeed GET or SET (change/create/delete) them. rights to indeed GET or SET (change/create/delete) them.
9. IANA Considerations 9. IANA Considerations
Three new values of IANAifType: g9981(263), g9982(264) and g9983(265) Three new values of IANAifType -- g9981(263), g9982(264), and
have been allocated by IANA [1] in the IANAifType-MIB module g9983(265) -- have been allocated by IANA <http://www.iana.org/> in
[IANAifType-MIB]. the IANAifType-MIB module [IANAifType-MIB].
An object identifier for gBondMIB MODULE-IDENTITY SHALL be allocated An object identifier for gBondMIB MODULE-IDENTITY has been allocated
by IANA in the MIB-2 transmission sub-tree, before this document is by IANA in the MIB-2 transmission sub-tree (211).
published.
This document defines the first version of the IANA-maintained IANA- This document defines the first version of the IANA-maintained IANA-
GBOND-MIB module. It is intended that each new G.998 bonding scheme GBOND-TC-MIB module. It is intended that each new G.998 bonding
defined by the ITU-T Q4/SG15 working group and approved for scheme defined by the ITU-T Q4/SG15 working group and approved for
publication in a revision of ITU-T G.998.x is added to the IANA- publication in a revision of ITU-T G.998.x will be added to the IANA-
maintaned MIB module, provided that it is suitable for being managed maintained MIB module, provided that it is suitable for being managed
by the base objects in the GBOND-MIB module. by the base objects in the GBOND-MIB module. An object identifier
for ianaGBondTcMIB MODULE-IDENTITY has been allocated by IANA in the
MIB-2 transmission sub-tree (215).
For each new bonding scheme added, a short description of the bonding For each new bonding scheme added, a short description of the bonding
protocol and, wherever possible, a reference to a publicly available protocol and, wherever possible, a reference to a publicly available
specification SHOULD be specified. An Expert Review, as defined in specification SHOULD be specified. An Expert Review, as defined in
[RFC5226]., is REQUIRED, for each modification. [RFC5226], is REQUIRED for each modification.
10. Acknowledgments 10. Acknowledgments
This document was produced by the [ADSLMIB] working group. This document was produced by the [ADSLMIB] working group.
Special thanks to Dan Romascanu for his meticulous review of this Special thanks to Dan Romascanu for his meticulous review of this
text. text.
11. References 11. References
11.1. Normative References 11.1. Normative References
[RFC2119] Bradner, S., "Key words for use in [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
RFCs to Indicate Requirement Requirement Levels", BCP 14, RFC 2119, March 1997.
Levels", BCP 14, RFC 2119,
March 1997.
[RFC2578] McCloghrie, K., Ed., Perkins, D.,
Ed., and J. Schoenwaelder, Ed.,
"Structure of Management
Information Version 2 (SMIv2)",
STD 58, RFC 2578, April 1999.
[RFC2579] McCloghrie, K., Ed., Perkins, D.,
Ed., and J. Schoenwaelder, Ed.,
"Textual Conventions for SMIv2",
STD 58, RFC 2579, April 1999.
[RFC2580] McCloghrie, K., Perkins, D., and
J. Schoenwaelder, "Conformance
Statements for SMIv2", STD 58,
RFC 2580, April 1999.
[RFC2863] McCloghrie, K. and F. Kastenholz,
"The Interfaces Group MIB",
RFC 2863, June 2000.
[RFC3411] Harrington, D., Presuhn, R., and [RFC2578] McCloghrie, K., Ed., Perkins, D., Ed., and J.
B. Wijnen, "An Architecture for Schoenwaelder, Ed., "Structure of Management Information
Describing Simple Network Version 2 (SMIv2)", STD 58, RFC 2578, April 1999.
Management Protocol (SNMP)
Management Frameworks", STD 62,
RFC 3411, December 2002.
[RFC3414] Blumenthal, U. and B. Wijnen, [RFC2579] McCloghrie, K., Ed., Perkins, D., Ed., and J.
"User-based Security Model (USM) Schoenwaelder, Ed., "Textual Conventions for SMIv2",
for version 3 of the Simple STD 58, RFC 2579, April 1999.
Network Management Protocol
(SNMPv3)", STD 62, RFC 3414,
December 2002.
[RFC3705] Ray, B. and R. Abbi, "High [RFC2580] McCloghrie, K., Perkins, D., and J. Schoenwaelder,
Capacity Textual Conventions for "Conformance Statements for SMIv2", STD 58, RFC 2580,
MIB Modules Using Performance April 1999.
History Based on 15 Minute
Intervals", RFC 3705,
February 2004.
[RFC3826] Blumenthal, U., Maino, F., and K. [RFC2863] McCloghrie, K. and F. Kastenholz, "The Interfaces Group
McCloghrie, "The Advanced MIB", RFC 2863, June 2000.
Encryption Standard (AES) Cipher
Algorithm in the SNMP User-based
Security Model", RFC 3826,
June 2004.
[RFC5226] Narten, T. and H. Alvestrand, [RFC3411] Harrington, D., Presuhn, R., and B. Wijnen, "An
"Guidelines for Writing an IANA Architecture for Describing Simple Network Management
Considerations Section in RFCs", Protocol (SNMP) Management Frameworks", STD 62, RFC 3411,
BCP 26, RFC 5226, May 2008. December 2002.
[TR-159] Beili, E. and M. Morgenstern, [RFC3414] Blumenthal, U. and B. Wijnen, "User-based Security Model
"Management Framework for xDSL (USM) for version 3 of the Simple Network Management
Bonding", Broadband Forum Protocol (SNMPv3)", STD 62, RFC 3414, December 2002.
technical report TR-159,
December 2008.
11.2. Informative References [RFC3705] Ray, B. and R. Abbi, "High Capacity Textual Conventions
for MIB Modules Using Performance History Based on 15
Minute Intervals", RFC 3705, February 2004.
[802.3] IEEE, "IEEE Standard for [RFC3826] Blumenthal, U., Maino, F., and K. McCloghrie, "The
Information technology - Advanced Encryption Standard (AES) Cipher Algorithm in the
Telecommunications and information SNMP User-based Security Model", RFC 3826, June 2004.
exchange between systems - Local
and metropolitan area networks -
Specific requirements - Part 3:
Carrier Sense Multiple Access with
Collision Detection (CSMA/CD)
Access Method and Physical Layer
Specifications", IEEE Std 802.3-
2005, December 2005.
[ADSLMIB] IETF, "ADSL MIB (adslmib) [RFC5226] Narten, T. and H. Alvestrand, "Guidelines for Writing an
Charter", <http://www.ietf.org/ IANA Considerations Section in RFCs", BCP 26, RFC 5226,
html.charters/ May 2008.
adslmib-charter.html>.
[G.991.2] ITU-T, "Single-pair High-speed [RFC5591] Harrington, D. and W. Hardaker, "Transport Security Model
Digital Subscriber Line (SHDSL) for the Simple Network Management Protocol (SNMP)",
transceivers", ITU-T RFC 5591, June 2009.
Recommendation G.991.2,
December 2003, <http://
www.itu.int/rec/T-REC-G.991.2/en>.
[G.993.1] ITU-T, "Very High speed Digital [RFC5592] Harrington, D., Salowey, J., and W. Hardaker, "Secure
Subscriber Line transceivers", Shell Transport Model for the Simple Network Management
ITU-T Recommendation G.993.1, Protocol (SNMP)", RFC 5592, June 2009.
June 2004, <http://www.itu.int/
rec/T-REC-G.993.1/en>.
[G.994.1] ITU-T, "Handshake procedures for [RFC6353] Hardaker, W., "Transport Layer Security (TLS) Transport
digital subscriber line (DSL) Model for the Simple Network Management Protocol (SNMP)",
transceivers", ITU-T RFC 6353, July 2011.
Recommendation G.994.1,
February 2007, <http://
www.itu.int/rec/T-REC-G.994.1/en>.
[G.998.1] ITU-T, "ATM-based multi-pair [TR-159] Beili, E. and M. Morgenstern, "Management Framework for
bonding", ITU-T xDSL Bonding", Broadband Forum Technical Report TR-159,
Recommendation G.998.1, December 2008, <http://www.broadband-forum.org/technical/
January 2005, <http://www.itu.int/ download/TR-159.pdf>.
rec/T-REC-G.998.1/en>.
[G.998.2] ITU-T, "Ethernet-based multi-pair 11.2. Informative References
bonding", ITU-T
Recommendation G.998.2,
January 2005, <http://www.itu.int/
rec/T-REC-G.998.2/en>.
[G.998.3] ITU-T, "Multi-pair bonding using [802.3] IEEE, "IEEE Standard for Information technology -
time-division inverse Telecommunications and information exchange between
multiplexing", ITU-T systems - Local and metropolitan area networks - Specific
Recommendation G.998.3, requirements - Part 3: Carrier Sense Multiple Access with
January 2005, <http://www.itu.int/ Collision Detection (CSMA/CD) Access Method and Physical
rec/T-REC-G.998.3/en>. Layer Specifications", IEEE Std 802.3-2005, December 2005.
[I-D.ietf-adslmib-gbond-atm-mib] Beili, E., "ATM-based xDSL Bonded [ADSLMIB] IETF, "ADSL MIB (adslmib) Charter",
Interfaces MIB", draft-ietf- <http://datatracker.ietf.org/wg/adslmib/charter/>.
adslmib-gbond-atm-mib-06 (work in
progress), March 2012.
[I-D.ietf-adslmib-gbond-eth-mib] Beili, E. and M. Morgenstern, [AF-PHY-0086]
"Ethernet-based xDSL Bonded ATM Forum, "Inverse Multiplexing for ATM (IMA)
Interfaces MIB", draft-ietf- Specification Version 1.1", ATM Forum specification af-
adslmib-gbond-eth-mib-07 (work in phy-0086.001, March 1999, <http://www.broadband-forum.org/
progress), July 2012. ftp/pub/approved-specs/af-phy-0086.001.pdf>.
[I-D.ietf-adslmib-gbond-tdim-mib] Beili, E., "TDIM-based xDSL Bonded [G.994.1] ITU-T, "Handshake procedures for digital subscriber line
Interfaces MIB", draft-ietf- (DSL) transceivers", ITU-T Recommendation G.994.1,
adslmib-gbond-tdim-mib-08 (work in June 2012, <http://www.itu.int/rec/T-REC-G.994.1/en>.
progress), March 2012.
[IANAifType-MIB] Internet Assigned Numbers [G.998.1] ITU-T, "ATM-based multi-pair bonding", ITU-T
Authority (IANA), "IANAifType Recommendation G.998.1, January 2005,
Textual Convention definition", <h <http://www.itu.int/rec/T-REC-G.998.1/en>.
ttp://www.iana.org/assignments/
ianaiftype-mib>.
[RFC2790] Waldbusser, S. and P. Grillo, [G.998.2] ITU-T, "Ethernet-based multi-pair bonding", ITU-T
"Host Resources MIB", RFC 2790, Recommendation G.998.2, January 2005,
March 2000. <http://www.itu.int/rec/T-REC-G.998.2/en>.
[RFC2864] McCloghrie, K. and G. Hanson, "The [G.998.3] ITU-T, "Multi-pair bonding using time-division inverse
Inverted Stack Table Extension to multiplexing", ITU-T Recommendation G.998.3, January 2005,
the Interfaces Group MIB", <http://www.itu.int/rec/T-REC-G.998.3/en>.
RFC 2864, June 2000.
[RFC3410] Case, J., Mundy, R., Partain, D., [IANAifType-MIB]
and B. Stewart, "Introduction and Internet Assigned Numbers Authority (IANA), "IANAifType
Applicability Statements for Textual Convention definition",
Internet-Standard Management <http://www.iana.org/assignments/ianaiftype-mib>.
Framework", RFC 3410,
December 2002.
[RFC3440] Ly, F. and G. Bathrick, [RFC2790] Waldbusser, S. and P. Grillo, "Host Resources MIB",
"Definitions of Extension Managed RFC 2790, March 2000.
Objects for Asymmetric Digital
Subscriber Lines", RFC 3440,
December 2002.
[RFC3593] Tesink, K., "Textual Conventions [RFC2864] McCloghrie, K. and G. Hanson, "The Inverted Stack Table
for MIB Modules Using Performance Extension to the Interfaces Group MIB", RFC 2864,
History Based on 15 Minute June 2000.
Intervals", RFC 3593,
September 2003.
[RFC3728] Ray, B. and R. Abbi, "Definitions [RFC3410] Case, J., Mundy, R., Partain, D., and B. Stewart,
of Managed Objects for Very High "Introduction and Applicability Statements for Internet-
Speed Digital Subscriber Lines Standard Management Framework", RFC 3410, December 2002.
(VDSL)", RFC 3728, February 2004.
[RFC4181] Heard, C., "Guidelines for Authors [RFC3440] Ly, F. and G. Bathrick, "Definitions of Extension Managed
and Reviewers of MIB Documents", Objects for Asymmetric Digital Subscriber Lines",
BCP 111, RFC 4181, September 2005. RFC 3440, December 2002.
[RFC4319] Sikes, C., Ray, B., and R. Abbi, [RFC3593] Tesink, K., "Textual Conventions for MIB Modules Using
"Definitions of Managed Objects Performance History Based on 15 Minute Intervals",
for High Bit-Rate DSL - 2nd RFC 3593, September 2003.
generation (HDSL2) and Single-Pair
High-Speed Digital Subscriber Line
(SHDSL) Lines", RFC 4319,
December 2005.
[RFC4706] Morgenstern, M., Dodge, M., [RFC3728] Ray, B. and R. Abbi, "Definitions of Managed Objects for
Baillie, S., and U. Bonollo, Very High Speed Digital Subscriber Lines (VDSL)",
"Definitions of Managed Objects RFC 3728, February 2004.
for Asymmetric Digital Subscriber
Line 2 (ADSL2)", RFC 4706,
November 2006.
[RFC5066] Beili, E., "Ethernet in the First [RFC4181] Heard, C., "Guidelines for Authors and Reviewers of MIB
Mile Copper (EFMCu) Interfaces Documents", BCP 111, RFC 4181, September 2005.
MIB", RFC 5066, November 2007.
[RFC5591] Harrington, D. and W. Hardaker, [RFC4319] Sikes, C., Ray, B., and R. Abbi, "Definitions of Managed
"Transport Security Model for the Objects for High Bit-Rate DSL - 2nd generation (HDSL2) and
Simple Network Management Protocol Single-Pair High-Speed Digital Subscriber Line (SHDSL)
(SNMP)", RFC 5591, June 2009. Lines", RFC 4319, December 2005.
[RFC5592] Harrington, D., Salowey, J., and [RFC4706] Morgenstern, M., Dodge, M., Baillie, S., and U. Bonollo,
W. Hardaker, "Secure Shell "Definitions of Managed Objects for Asymmetric Digital
Transport Model for the Simple Subscriber Line 2 (ADSL2)", RFC 4706, November 2006.
Network Management Protocol
(SNMP)", RFC 5592, June 2009.
[RFC5650] Morgenstern, M., Baillie, S., and [RFC5066] Beili, E., "Ethernet in the First Mile Copper (EFMCu)
U. Bonollo, "Definitions of Interfaces MIB", RFC 5066, November 2007.
Managed Objects for Very High
Speed Digital Subscriber Line 2
(VDSL2)", RFC 5650,
September 2009.
[RFC5905] Mills, D., Martin, J., Burbank, [RFC5650] Morgenstern, M., Baillie, S., and U. Bonollo, "Definitions
J., and W. Kasch, "Network Time of Managed Objects for Very High Speed Digital Subscriber
Protocol Version 4: Protocol and Line 2 (VDSL2)", RFC 5650, September 2009.
Algorithms Specification",
RFC 5905, June 2010.
[RFC6353] Hardaker, W., "Transport Layer [RFC5905] Mills, D., Martin, J., Burbank, J., and W. Kasch, "Network
Security (TLS) Transport Model for Time Protocol Version 4: Protocol and Algorithms
the Simple Network Management Specification", RFC 5905, June 2010.
Protocol (SNMP)", RFC 6353,
July 2011.
[af-phy-0086] ATM Forum, "Inverse Multiplexing [RFC6766] Beili, E., "xDSL Multi-Pair Bonding Using Time-Division
for ATM (IMA) Specification Inverse Multiplexing (G.Bond/TDIM) MIB", RFC 6766,
Version 1.1", ATM Forum February 2013.
specification af-pfy-0086.001,
March 1999.
URIs [RFC6767] Beili, E. and M. Morgenstern, "Ethernet-Based xDSL Multi-
Pair Bonding (G.Bond/Ethernet) MIB", RFC 6767,
February 2013.
[1] <http://www.iana.org/> [RFC6768] Beili, E., "ATM-Based xDSL Bonded Interfaces MIB",
RFC 6768, February 2013.
Authors' Addresses Authors' Addresses
Edward Beili Edward Beili
Actelis Networks Actelis Networks
25 Bazel St. 25 Bazel St.
Petach-Tikva 49103 Petach-Tikva 49103
Israel Israel
Phone: +972-3-924-3491 Phone: +972-3-924-3491
 End of changes. 448 change blocks. 
1200 lines changed or deleted 1118 lines changed or added

This html diff was produced by rfcdiff 1.41. The latest version is available from http://tools.ietf.org/tools/rfcdiff/