draft-ietf-adslmib-hdsl2-06.txt   draft-ietf-adslmib-hdsl2-07.txt 
INTERNET-DRAFT B. Ray INTERNET-DRAFT B. Ray
Verilink Corporation Verilink Corporation
R. Abbi R. Abbi
Alcatel Alcatel
November 2000 January 2001
Definitions of Managed Objects for HDSL2 and SHDSL Lines Definitions of Managed Objects for HDSL2 and SHDSL Lines
draft-ietf-adslmib-hdsl2-06.txt draft-ietf-adslmib-hdsl2-07.txt
Status of this Memo Status of this Memo
This document is an Internet-Draft and is in full conformance with This document is an Internet-Draft and is in full conformance with
all provisions of Section 10 of RFC 2026. all provisions of Section 10 of RFC 2026.
Internet-Drafts are working documents of the Internet Engineering Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF), its areas, and its working groups. Note that other Task Force (IETF), its areas, and its working groups. Note that other
groups may also distribute working documents as Internet-Drafts. groups may also distribute working documents as Internet-Drafts.
skipping to change at line 39 skipping to change at line 39
http://www.ietf.org/shadow.html. http://www.ietf.org/shadow.html.
To view the entire list of current Internet-Drafts, please check the To view the entire list of current Internet-Drafts, please check the
"1id-abstracts.txt" listing contained in the Internet-Drafts Shadow "1id-abstracts.txt" listing contained in the Internet-Drafts Shadow
Directories on ftp.is.co.za (Africa), ftp.nordu.net (Northern Directories on ftp.is.co.za (Africa), ftp.nordu.net (Northern
Europe), ftp.nis.garr.it (Southern Europe), munnari.oz.au (Pacific Europe), ftp.nis.garr.it (Southern Europe), munnari.oz.au (Pacific
Rim), ftp.ietf.org (US East Coast), or ftp.isi.edu (US West Coast). Rim), ftp.ietf.org (US East Coast), or ftp.isi.edu (US West Coast).
Copyright Notice Copyright Notice
Copyright (C) The Internet Society (2000). All Rights Reserved. Copyright (C) The Internet Society (2001). All Rights Reserved.
Expires May 21, 2001 Page [1] Expires July 26, 2001 Page [1]
Table of Contents Table of Contents
1. Abstract .................................................. 2 1. Abstract .................................................. 2
2. The SNMPv2 Network Management Framework ................... 2 2. The SNMPv2 Network Management Framework ................... 2
3. Introduction .............................................. 3 3. Introduction .............................................. 3
3.1 Relationship of the MIB with Standard MIBs ................ 4 3.1 Relationship of the MIB with Standard MIBs ................ 4
4. Conventions used in the MIB ............................... 5 4. Conventions used in the MIB ............................... 5
4.1 Naming Conventions ........................................ 5 4.1 Naming Conventions ........................................ 5
4.2 Textual Conventions ....................................... 5 4.2 Textual Conventions ....................................... 5
4.3 Structure ................................................. 6 4.3 Structure ................................................. 6
4.4 Counters, Interval Buckets and Thresholds ................. 9 4.4 Counters, Interval Buckets and Thresholds ................. 9
4.5 Profiles .................................................. 9 4.5 Profiles .................................................. 9
4.6 Traps ..................................................... 11 4.6 Traps ..................................................... 10
5. Conformance and Compliance ................................ 12 5. Conformance and Compliance ................................ 12
6. Definitions ............................................... 12 6. Definitions ............................................... 12
7. Security Considerations ................................... 48 7. Security Considerations ................................... 50
8. Acknowledgments ........................................... 48 8. Acknowledgments ........................................... 51
9. References ................................................ 49 9. References ................................................ 52
10. Intellectual Property Notice .............................. 50 10. Intellectual Property Notice .............................. 53
11. Authors' Addresses ........................................ 51 11. Authors' Addresses ........................................ 54
12. Full Copyright Statement .................................. 51 12. Full Copyright Statement .................................. 54
1. Abstract 1. Abstract
This document defines an experimental portion of the Management This document defines an experimental portion of the Management
Information Base (MIB) MIB module for use with network management Information Base (MIB) MIB module for use with network management
protocols in the Internet community. In particular, it describes protocols in the Internet community. In particular, it describes
objects used for managing HDSL2 and SHDSL interfaces. objects used for managing HDSL2 and SHDSL interfaces.
This document specifies a MIB module in a manner that is both compliant This document specifies a MIB module in a manner that is both compliant
to the SNMPv2 SMI, and semantically identical to the peer SNMPv1 to the SNMPv2 SMI, and semantically identical to the peer SNMPv1
skipping to change at line 95 skipping to change at line 95
Management Information (SMI) is called SMIv1 and described in Management Information (SMI) is called SMIv1 and described in
STD 16, RFC 1155 [2], STD 16, RFC 1212 [3] and RFC 1215 [4]. STD 16, RFC 1155 [2], STD 16, RFC 1212 [3] and RFC 1215 [4].
The second version, called SMIv2, is described in STD 58, RFC The second version, called SMIv2, is described in STD 58, RFC
2578 [5], STD 58, RFC 2579 [6] and STD 58, RFC 2580 [7]. 2578 [5], STD 58, RFC 2579 [6] and STD 58, RFC 2580 [7].
o Message protocols for transferring management information. The o Message protocols for transferring management information. The
first version of the SNMP message protocol is called SNMPv1 and first version of the SNMP message protocol is called SNMPv1 and
described in STD 15, RFC 1157 [8]. A second version of the SNMP described in STD 15, RFC 1157 [8]. A second version of the SNMP
message protocol, which is not an Internet standards track message protocol, which is not an Internet standards track
protocol, is called SNMPv2c and described in RFC 1901 [9] and protocol, is called SNMPv2c and described in RFC 1901 [9] and
Expires May 21, 2001 Page [2]
RFC 1906 [10]. The third version of the message protocol is RFC 1906 [10]. The third version of the message protocol is
Expires July 26, 2001 Page [2]
called SNMPv3 and described in RFC 1906 [10], RFC 2572 [11] and called SNMPv3 and described in RFC 1906 [10], RFC 2572 [11] and
RFC 2574 [12]. RFC 2574 [12].
o Protocol operations for accessing management information. The o Protocol operations for accessing management information. The
first set of protocol operations and associated PDU formats is first set of protocol operations and associated PDU formats is
described in STD 15, RFC 1157 [8]. A second set of protocol described in STD 15, RFC 1157 [8]. A second set of protocol
operations and associated PDU formats is described in RFC 1905 operations and associated PDU formats is described in RFC 1905
[13]. [13].
o A set of fundamental applications described in RFC 2573 [14] o A set of fundamental applications described in RFC 2573 [14]
skipping to change at line 149 skipping to change at line 149
type together with an object instance serves to uniquely identify a type together with an object instance serves to uniquely identify a
specific instantiation of the object. For human convenience, we specific instantiation of the object. For human convenience, we
often use a textual string, termed the descriptor, to also refer to often use a textual string, termed the descriptor, to also refer to
the object type. the object type.
3. Introduction 3. Introduction
This document describes an SNMP MIB for managing HDSL2/SHDSL Lines. This document describes an SNMP MIB for managing HDSL2/SHDSL Lines.
The MIB is intended to be compatible with both the SNMPv1 and SNMPv2. The MIB is intended to be compatible with both the SNMPv1 and SNMPv2.
These definitions are based upon the specifications for the HDSL2 and These definitions are based upon the specifications for the HDSL2 and
Expires May 21, 2001 Page [2]
SHDSL Embedded Operations Channel (EOC) as defined in ANSI SHDSL Embedded Operations Channel (EOC) as defined in ANSI
T1E1.4/2000-006 [18] and ITU G.991.2 (ex G.SHDSL) [19]. T1E1.4/2000-006 [18] and ITU G.991.2 (ex G.SHDSL) [19].
Expires July 26, 2001 Page [3]
The MIB will eventually be located in the MIB tree under MIB 2 The MIB will eventually be located in the MIB tree under MIB 2
transmission, as discussed in the MIB-2 Integration (RFC 1213 [20] and transmission, as discussed in the MIB-2 Integration (RFC 1213 [20] and
RFC 2863 [21]) section of this document. Until approved by the IETF, RFC 2863 [21]) section of this document. Until approved by the IETF,
vendors may also choose to support it under the experimental tree. vendors may also choose to support it under the experimental tree.
NOTE TO RFC EDITOR: please replace the above paragraph with the NOTE TO RFC EDITOR: please replace the above paragraph with the
following paragraph when appropriate: following paragraph when appropriate:
The MIB is located in the MIB tree under MIB-2 transmission, as The MIB is located in the MIB tree under MIB-2 transmission, as
discussing in the MIB-2 Integration (RFC 1213 [20] and RFC 2863 [21]) discussing in the MIB-2 Integration (RFC 1213 [20] and RFC 2863 [21])
skipping to change at line 191 skipping to change at line 190
... ...
SYNTAX INTEGER { SYNTAX INTEGER {
... ...
hdsl2 (168), -- High Bit-Rate DSL, 2nd generation hdsl2 (168), -- High Bit-Rate DSL, 2nd generation
shdsl (169), -- Multirate HDSL2 shdsl (169), -- Multirate HDSL2
... ...
} }
This MIB will be accessed through the transmission subtree as shown: This MIB will be accessed through the transmission subtree as shown:
hdsl2ShdslInterface ::= { transmission xxx } hdsl2ShdslInterface ::= { experimental 109 }
NOTE TO RFC EDITOR: please replace the xxx with an assigned number NOTE TO RFC EDITOR: please replace experimental 109 with an assigned
number in the transmission tree
3.1.2 Usage of ifTable 3.1.2 Usage of ifTable
The MIB branch identified by this ifType contains tables appropriate The MIB branch identified by this ifType contains tables appropriate
for this interface type. Most such tables extend the ifEntry table, for this interface type. Most such tables extend the ifEntry table,
and are indexed by ifIndex. and are indexed by ifIndex.
The following attributes are part of the mandatory ifGeneral group in The following attributes are part of the mandatory ifGeneral group in
RFC 2863 [21], and are not duplicated in the HDSL2/SHDSL Line MIB. RFC 2863 [21], and are not duplicated in the HDSL2/SHDSL Line MIB.
Expires May 21, 2001 Page [3]
=================================================================== ===================================================================
ifIndex Interface index. ifIndex Interface index.
ifDescr See interfaces MIB [21]. ifDescr See interfaces MIB [21].
Expires July 26, 2001 Page [4]
ifType hdsl2(168) or shdsl(169). ifType hdsl2(168) or shdsl(169).
ifSpeed Set as appropriate. ifSpeed Set as appropriate.
(This is fixed at 1552000 for HDSL2 lines) (This is fixed at 1552000 for HDSL2 lines)
ifPhysAddress This object should have an octet string ifPhysAddress This object should have an octet string
with zero length. with zero length.
ifAdminStatus See interfaces MIB [21]. ifAdminStatus See interfaces MIB [21].
skipping to change at line 249 skipping to change at line 248
A. xtuC refers to a central site terminal unit; A. xtuC refers to a central site terminal unit;
H2TU-C for HDSL2, or STU-C for SHDSL. H2TU-C for HDSL2, or STU-C for SHDSL.
B. xtuR refers to a remote site terminal unit; B. xtuR refers to a remote site terminal unit;
H2TU-R for HDSL2, or STU-R for SHDSL. H2TU-R for HDSL2, or STU-R for SHDSL.
C. xtu refers to a terminal unit; either an xtuC or xtuR. C. xtu refers to a terminal unit; either an xtuC or xtuR.
D. xru refer to a regenerator unit; D. xru refer to a regenerator unit;
H2RU for HDSL2, or SRU for SHDSL. H2RU for HDSL2, or SRU for SHDSL.
E. xU refers to any HDSL2/SHDSL unit; either an xtu or xru. E. xU refers to any HDSL2/SHDSL unit; either an xtu or xru.
F. CRC is cyclic redundancy check. F. CRC is cyclic redundancy check.
G. ES means errored second. G. ES means errored second.
H. LOS means loss of signal. H. LOSW means loss of sync word.
I. LOSS means loss of signal second. I. LOSWS means LOSW seconds.
J. LOSW means loss of sync word, distinct from LOS. J. SES means severely errored second.
K. LOSWS means LOSW second. K. SNR means signal-to-noise ratio.
L. SES means severely errored second. L. UAS means unavailable second.
M. SNR means signal-to-noise ratio.
N. UAS means unavailable second.
Expires May 21, 2001 Page [4]
4.2. Textual Conventions 4.2. Textual Conventions
The following textual conventions are defined to reflect the line The following textual conventions are defined to reflect the line
topology in the MIB (further discussed is the following section) topology in the MIB (further discussed is the following section)
and to define the behaviour of the statistics to be maintained and to define the behaviour of the statistics to be maintained
by an agent. by an agent.
o Hdsl2ShdslUnitId : o Hdsl2ShdslUnitId :
Expires July 26, 2001 Page [5]
This attribute uniquely identifies each unit in a HDSL2/SHDSL span. This attribute uniquely identifies each unit in a HDSL2/SHDSL span.
It mirrors the EOC addressing mechanism: It mirrors the EOC addressing mechanism:
xtuC(1) - CO terminal unit xtuC(1) - CO terminal unit
xtuR(2) - CPE terminal unit xtuR(2) - CPE terminal unit
xru1(3) .. xru8(10) - regenerators, numbered from xru1(3) .. xru8(10) - regenerators, numbered from
central office side central office side
o Hdsl2ShdslUnitSide: o Hdsl2ShdslUnitSide:
This attribute references the two sides of a unit: This attribute references the two sides of a unit:
skipping to change at line 289 skipping to change at line 286
customerSide(2) - C in figure 2, below customerSide(2) - C in figure 2, below
o Hdsl2ShdslWirePair: o Hdsl2ShdslWirePair:
This attribute references the wire-pairs connecting the units: This attribute references the wire-pairs connecting the units:
wirePair1(1) - First pair for HDSL2/SHDSL. wirePair1(1) - First pair for HDSL2/SHDSL.
wirePair2(2) - Optional second pair for SHDSL only. wirePair2(2) - Optional second pair for SHDSL only.
o Hdsl2ShdslTransmissionModeType: o Hdsl2ShdslTransmissionModeType:
This attribute specifies the regional setting for a SHDSL line. This attribute specifies the regional setting for a SHDSL line.
Specified as a bit-map, the three mode type are: Specified as a bit-map, the two mode types are:
region1 - ITU-T G.991.2 Annex A region1 - ITU-T G.991.2 Annex A
region2 - ITU-T G.991.2 Annex B region2 - ITU-T G.991.2 Annex B
region3 - ITU-T G.991.2 Annex C
o Hdsl2ShdslPerfCurrDayCount: o Hdsl2ShdslPerfCurrDayCount:
This attribute defines the behaviour of the 1-day (24 hour) This attribute defines the behaviour of the 1-day (24 hour)
gauges found in the MIB. gauges found in the MIB.
o Hdsl2Shdsl1DayIntervalCount: o Hdsl2Shdsl1DayIntervalCount:
This attribute defines the behaviour of the 1-day (24 hour) This attribute defines the behaviour of the 1-day (24 hour)
interval counters found in the MIB. interval counters found in the MIB.
o Hdsl2ShdslPerfTimeElapsed: o Hdsl2ShdslPerfTimeElapsed:
This attribute defines the behaviour of the elapsed time counters This attribute defines the behaviour of the elapsed time counters
found in the MIB. found in the MIB.
o Hdsl2ShdslPerfIntervalThreshold: o Hdsl2ShdslPerfIntervalThreshold:
Expires May 21, 2001 Page [5]
This attribute defines the behaviour of the alarm thresholds found This attribute defines the behaviour of the alarm thresholds found
in the MIB. in the MIB.
4.3. Structure 4.3. Structure
The MIB is structured into following MIB groups: The MIB is structured into following MIB groups:
o Span Configuration Group: o Span Configuration Group:
Expires July 26, 2001 Page [6]
This group supports MIB objects for configuring parameters for This group supports MIB objects for configuring parameters for
the HDSL2/SHDSL span. It contains the following table(s): the HDSL2/SHDSL span. It contains the following table(s):
- hdsl2ShdslSpanConfTable - hdsl2ShdslSpanConfTable
o Span Status Group: o Span Status Group:
This group supports MIB objects for retrieving span status This group supports MIB objects for retrieving span status
information. It contains the following table(s): information. It contains the following table(s):
skipping to change at line 366 skipping to change at line 362
- hdsl2ShdslEndpointCurrTable - hdsl2ShdslEndpointCurrTable
o Segment Endpoint 15-Minute Interval Status/Performance Group: o Segment Endpoint 15-Minute Interval Status/Performance Group:
This group supports MIB objects that provide historic This group supports MIB objects that provide historic
status/performance information relating to segment endpoints status/performance information relating to segment endpoints
in 15-minute intervals. It contains the following table(s): in 15-minute intervals. It contains the following table(s):
- hdsl2Shdsl15MinIntervalTable - hdsl2Shdsl15MinIntervalTable
Expires May 21, 2001 Page [6]
o Segment Endpoint 1-Day Interval Status/Performance Group: o Segment Endpoint 1-Day Interval Status/Performance Group:
This group supports MIB objects that provide historic This group supports MIB objects that provide historic
status/performance information relating to segment endpoints status/performance information relating to segment endpoints
in 1-day intervals. It contains the following table(s): in 1-day intervals. It contains the following table(s):
- hdsl2Shdsl1DayIntervalTable - hdsl2Shdsl1DayIntervalTable
o Maintenance Group: o Maintenance Group:
Expires July 26, 2001 Page [7]
This group supports MIB objects for performing maintenance This group supports MIB objects for performing maintenance
operations such as loopbacks for HDSL2/SHDSL lines. It contains operations such as loopbacks for HDSL2/SHDSL lines. It contains
the following table(s): the following table(s):
- hdsl2ShdslEndpointMaintTable - hdsl2ShdslEndpointMaintTable
- hdsl2ShdslUnitMaintTable - hdsl2ShdslUnitMaintTable
o Span Configuration Profile Group: o Span Configuration Profile Group:
This group supports MIB objects for defining configuration profiles This group supports MIB objects for defining configuration profiles
skipping to change at line 402 skipping to change at line 397
o Segment Endpoint Alarm Configuration Profile Group: o Segment Endpoint Alarm Configuration Profile Group:
This group supports MIB objects for defining alarm configuration This group supports MIB objects for defining alarm configuration
profiles for HDSL2/SHDSL Segment Endpoints. It contains the profiles for HDSL2/SHDSL Segment Endpoints. It contains the
following table(s): following table(s):
- hdsl2ShdslEndpointAlarmConfProfileTable - hdsl2ShdslEndpointAlarmConfProfileTable
o Notifications Group: o Notifications Group:
This group defines Notiofication messages supported for HDSL2/ This group defines Notification messages supported for HDSL2/
SHDSL lines. It defines the following notifications: SHDSL lines. It defines the following notifications:
- hdsl2ShdslLoopAttenCrossingTrap - hdsl2ShdslLoopAttenCrossingTrap
- hdsl2ShdslSNRMarginCrossingTrap - hdsl2ShdslSNRMarginCrossingTrap
- hdsl2ShdslPerfESThreshTrap - hdsl2ShdslPerfESThreshTrap
- hdsl2ShdslPerfSESThreshTrap - hdsl2ShdslPerfSESThreshTrap
- hdsl2ShdslPerfCRCanomaliesThreshTrap - hdsl2ShdslPerfCRCanomaliesThreshTrap
- hdsl2ShdslPerfLOSWSThreshTrap - hdsl2ShdslPerfLOSWSThreshTrap
- hdsl2ShdslPerfUASThreshTrap - hdsl2ShdslPerfUASThreshTrap
- hdsl2ShdslSpanInvalidNumRepeaters - hdsl2ShdslSpanInvalidNumRepeaters
- hdsl2ShdslLoopbackFailure - hdsl2ShdslLoopbackFailure
- hdsl2ShdslpowerBackoff
- hdsl2ShdsldeviceFault
- hdsl2ShdsldcContinuityFault
- hdsl2ShdslconfigInitFailure
- hdsl2ShdslprotocolInitFailure
- hdsl2ShdslnoNeighborPresent
- hdsl2ShdsllocalPowerLoss
4.3.1 Line Topology 4.3.1 Line Topology
An HDSL2/SHDSL Line consists of a minimum of two units - xtuC (the An HDSL2/SHDSL Line consists of a minimum of two units - xtuC (the
central termination unit) and an xtuR (the remote termination unit). central termination unit) and an xtuR (the remote termination unit).
The line may optionally support up to 8 repeater/regenerator units The line may optionally support up to 8 repeater/regenerator units
(xru) as shown in the figure below. (xru) as shown in the figure below.
Expires May 21, 2001 Page [7] Expires July 26, 2001 Page [8]
<-- Network Side Customer Side --> <-- Network Side Customer Side -->
|</////////////////// HDSL2/SHDSL Span ////////////////////>| |</////////////////// HDSL2/SHDSL Span ////////////////////>|
<~~~> <~~~> HDSL2/SHDSL Segments <~~~> <~~~> <~~~> HDSL2/SHDSL Segments <~~~>
+-------+ +-------+ +-------+ +-------+ +-------+ +-------+ +-------+ +-------+ +-------+ +-------+
+ C=1=N C=1=N C=..1..=N C=1=N + + C=1=N C=1=N C=..1..=N C=1=N +
| xtuC | | xru1 | | xru2 | | xru8 | | xtuR | | xtuC | | xru1 | | xru2 | | xru8 | | xtuR |
+ C=2=N C=2=N C=..2..=N C=2=N + + C=2=N C=2=N C=..2..=N C=2=N +
+-------+ +-------+ +-------+ +-------+ +-------+ +-------+ +-------+ +-------+ +-------+ +-------+
Key: <////> HDSL2/SHDSL Span Key: <////> HDSL2/SHDSL Span
<~~~~> HDSL2/SHDSL Segment <~~~~> HDSL2/SHDSL Segment
1= HDSL2/SHDSL wire-pair-1 =1= HDSL2/SHDSL wire-pair-1
=2= SHDSL optional wire-pair-2 (Not applicable to HDSL2) =2= SHDSL optional wire-pair-2 (Not applicable to HDSL2)
C Customer Side Segment Endpoint (modem) C Customer Side Segment Endpoint (modem)
N Network Side Segment Endpoint (modem) N Network Side Segment Endpoint (modem)
Figure 2: General topology for an HDSL2/SHDSL Line Figure 2: General topology for an HDSL2/SHDSL Line
4.4. Counters, Interval Buckets and Thresholds 4.4. Counters, Interval Buckets and Thresholds
For SNR Margin, Loop Attenuation, ES, SES, CRC anomalies, LOSWS, and For SNR Margin, Loop Attenuation, ES, SES, CRC anomalies, LOSW, and
UAS, there are event counters, current 15-minute and one (up to 96) UAS, there are event counters, current 15-minute and one (up to 96)
15-minute history bucket(s) of "interval-counters", as well as 15-minute history bucket(s) of "interval-counters", as well as
current and one (up to 30) previous 1-day interval-counter(s). Each current and one (up to 30) previous 1-day interval-counter(s). Each
current 15-minute event bucket has an associated threshold trap. current 15-minute event bucket has an associated threshold trap.
Unlike RFC 2493 [22] and RFC 2662 [23], there is no representation Unlike RFC 2493 [22] and RFC 2662 [23], there is no representation
in the MIB for invalid buckets. In those cases where the data for in the MIB for invalid buckets. In those cases where the data for
an interval is suspect or known to be invalid, the agent should an interval is suspect or known to be invalid, the agent should
not report the interval. not report the interval.
skipping to change at line 474 skipping to change at line 476
agent is reset or reinitialized (or under specific request outside agent is reset or reinitialized (or under specific request outside
the scope of this MIB). the scope of this MIB).
4.5. Profiles 4.5. Profiles
As a managed node can handle a large number of xUs, (e.g., hundreds As a managed node can handle a large number of xUs, (e.g., hundreds
or perhaps thousands of lines), provisioning every parameter on every or perhaps thousands of lines), provisioning every parameter on every
xU may become burdensome. Moreover, most lines are provisioned xU may become burdensome. Moreover, most lines are provisioned
identically; with the same set of parameters. To simplify the identically; with the same set of parameters. To simplify the
provisioning process, this MIB makes use of profiles. A profile is a provisioning process, this MIB makes use of profiles. A profile is a
set of parameters that can be shared by multiple lines using the same
Expires May 21, 2001 Page [8] Expires July 26, 2001 Page [9]
set of parameters that can be shared by multiple lines using the same
configuration. configuration.
The following profiles are used in this MIB: The following profiles are used in this MIB:
o Span Configuration Profiles - Span configuration profiles contain o Span Configuration Profiles - Span configuration profiles contain
parameters for configuring HDSL2/SHDSL spans. They are defined in parameters for configuring HDSL2/SHDSL spans. They are defined in
the hdsl2ShdslSpanConfProfileTable. Since span configuration the hdsl2ShdslSpanConfProfileTable. Since span configuration
parameters are only applicable for SHDSL, the support for span parameters are only applicable for SHDSL, the support for span
configuration profiles is optional for HDSL2 interfaces. configuration profiles is optional for HDSL2 interfaces.
skipping to change at line 529 skipping to change at line 531
Profiles are created, assigned, and deleted dynamically using the Profiles are created, assigned, and deleted dynamically using the
profile name and profile row status in each of the four profile tables. profile name and profile row status in each of the four profile tables.
Profile changes MUST take effect immediately. These changes MAY result Profile changes MUST take effect immediately. These changes MAY result
in a restart (hard reset or soft restart) of the units on the line. in a restart (hard reset or soft restart) of the units on the line.
4.6. Traps 4.6. Traps
The ability to generate the SNMP traps coldStart/WarmStart (per [21]) The ability to generate the SNMP traps coldStart/WarmStart (per [21])
which are per agent (e.g., per DSLAM in such a device), and linkUp / which are per agent (e.g., per DSLAM in such a device), and linkUp /
Expires May 21, 2001 Page [9]
linkDown (per [21]) -- which are per interface (i.e., HDSL2/SHDSL line) linkDown (per [21]) -- which are per interface (i.e., HDSL2/SHDSL line)
is required. is required.
Expires July 26, 2001 Page [10]
A linkDown trap may be generated whenever any of ES, SES, CRC Anomaly, A linkDown trap may be generated whenever any of ES, SES, CRC Anomaly,
LOSWS, or UAS event occurs. At this operational point, a manager can LOSW, or UAS event occurs. The corresponding linkUp trap MAY be sent
use hdsl2ShdslEndpointCurrStatus for additional detailed information. when all link failure conditions are cleared.
The corresponding linkUp trap MAY be sent when all link failure
conditions are cleared.
The traps defined in this MIB are for initialization failure and for The traps defined in this MIB are for initialization failure and for
the threshold crossings associated with the following events: ES, SES, the threshold crossings associated with the following events: ES, SES,
CRC Anomaly, LOSWS, and UAS. Each threshold has its own CRC Anomaly, LOSW, and UAS. Each threshold has its own
enable/threshold value. When that value is 0, the trap is disabled. enable/threshold value. When that value is 0, the trap is disabled.
The hdsl2ShdslEndpointCurrStatus is a bitmask representing all The hdsl2ShdslEndpointCurrStatus is a bitmask representing all
outstanding error conditions associated with a particular Segment outstanding error conditions associated with a particular Segment
Endpoint. Note that since status of remote endpoints is obtained via Endpoint. Note that since status of remote endpoints is obtained via
the EOC, this information may be unavailable for units that are the EOC, this information may be unavailable for units that are
unreachable via EOC during a line error condition. Therefore, not all unreachable via EOC during a line error condition. Therefore, not all
conditions may always be included in its current status. conditions may always be included in its current status. Traps
corresponding to the bit fields in this object are defined.
Two alarm conditions, SNR Margin Alarm and Loop Attenuation Alarm, Two alarm conditions, SNR Margin Alarm and Loop Attenuation Alarm,
are organized in a manner slightly different from that implied in are organized in a manner slightly different from that implied in
the EOC specifications. In the MIB, these alarm conditions are the EOC specifications. In the MIB, these alarm conditions are
tied to the two thresholds hdsl2ShdslEndpointThreshSNRMargin and tied to the two thresholds hdsl2ShdslEndpointThreshSNRMargin and
hdsl2ShdslEndpointThreshLoopAttenuation found in the hdsl2ShdslEndpointThreshLoopAttenuation found in the
hdsl2ShdslEndpointAlarmConfProfileTable. In the EOC, the alarm hdsl2ShdslEndpointAlarmConfProfileTable. In the EOC, the alarm
conditions associated with these thresholds are per-unit. In the conditions associated with these thresholds are per-unit. In the
MIB, these alarm conditions are per-endpoint. For terminal units, MIB, these alarm conditions are per-endpoint. For terminal units,
this has no impact. For repeaters, this implies an implementation this has no impact. For repeaters, this implies an implementation
skipping to change at line 584 skipping to change at line 584
For example, to get a trap whenever a "loss of" event occurs (but at For example, to get a trap whenever a "loss of" event occurs (but at
most once every 15 minutes), set the corresponding threshold to 1. The most once every 15 minutes), set the corresponding threshold to 1. The
agent will generate a trap when the event originally occurs. agent will generate a trap when the event originally occurs.
Note that the NMS may receive a linkDown trap, as well, if enabled. At Note that the NMS may receive a linkDown trap, as well, if enabled. At
the beginning of the next 15 minute interval, the counter is reset. the beginning of the next 15 minute interval, the counter is reset.
When the first second goes by and the event occurs, the current When the first second goes by and the event occurs, the current
interval bucket will be 1, which equals the threshold and the trap will interval bucket will be 1, which equals the threshold and the trap will
be sent again. be sent again.
Expires May 21, 2001 Page [10]
A hdsl2ShdslSpanInvalidNumRepeaters trap may be generated following A hdsl2ShdslSpanInvalidNumRepeaters trap may be generated following
completion of the discovery phase if the number of repeaters discovered completion of the discovery phase if the number of repeaters discovered
on the line differs from the number of repeaters specified in on the line differs from the number of repeaters specified in
hdsl2ShdslConfNumRepeaters. For those conditions where the number of hdsl2ShdslSpanConfNumRepeaters. For those conditions where the number
provisioned repeaters is greater than those encountered during span of provisioned repeaters is greater than those encountered during span
Expires July 26, 2001 Page [11]
discovery, all table entries associated with the nonexistant repeaters discovery, all table entries associated with the nonexistant repeaters
are to be discarded. For those conditions where the number of are to be discarded. For those conditions where the number of
provisioned repeaters is less than those encountered during span provisioned repeaters is less than those encountered during span
discovery, additional table entries are to be created using the default discovery, additional table entries are to be created using the default
span configuration profile. span configuration profile.
5. Conformance and Compliance 5. Conformance and Compliance
For both HDSL2 and SHDSL lines, the following group(s) are mandatory: For both HDSL2 and SHDSL lines, the following group(s) are mandatory:
skipping to change at line 639 skipping to change at line 640
RowStatus, RowStatus,
TEXTUAL-CONVENTION FROM SNMPv2-TC TEXTUAL-CONVENTION FROM SNMPv2-TC
ifIndex FROM IF-MIB ifIndex FROM IF-MIB
PerfCurrentCount, PerfCurrentCount,
PerfIntervalCount FROM PerfHist-TC-MIB PerfIntervalCount FROM PerfHist-TC-MIB
SnmpAdminString FROM SNMP-FRAMEWORK-MIB SnmpAdminString FROM SNMP-FRAMEWORK-MIB
MODULE-COMPLIANCE, MODULE-COMPLIANCE,
OBJECT-GROUP, OBJECT-GROUP,
NOTIFICATION-GROUP FROM SNMPv2-CONF; NOTIFICATION-GROUP FROM SNMPv2-CONF;
Expires May 21, 2001 Page [11]
hdsl2ShdslMIB MODULE-IDENTITY hdsl2ShdslMIB MODULE-IDENTITY
LAST-UPDATED "000011210000Z" -- November 21, 2000 LAST-UPDATED "200101260000Z" -- January 26, 2001
Expires July 26, 2001 Page [12]
ORGANIZATION "ADSLMIB Working Group" ORGANIZATION "ADSLMIB Working Group"
CONTACT-INFO CONTACT-INFO
" "
Bob Ray Bob Ray
Verilink Corporation Verilink Corporation
127 Jetplex Circle 950 Explorer Blvd
Madison, AL 35758 USA Huntsville, AL 35806 USA
Tel: +1 256-774-2380 Tel: +1 256-327-2380
Fax: +1 256-774-2277 Fax: +1 256-327-2880
E-mail: bray@verilink.com E-mail: bray@verilink.com
Rajesh Abbi Rajesh Abbi
Alcatel USA Alcatel USA
2912 Wake Forest Road 2912 Wake Forest Road
Raleigh, NC 27609-7860 USA Raleigh, NC 27609-7860 USA
Tel: +1 919-950-6194 Tel: +1 919-950-6194
Fax: +1 919-950-6670 Fax: +1 919-950-6670
E-mail: Rajesh.Abbi@usa.alcatel.com E-mail: Rajesh.Abbi@usa.alcatel.com
" "
skipping to change at line 678 skipping to change at line 679
"This MIB module defines a collection of objects for "This MIB module defines a collection of objects for
managing HDSL2/SHDSL lines. An agent may reside at managing HDSL2/SHDSL lines. An agent may reside at
either end of the line, however the MIB is designed either end of the line, however the MIB is designed
to require no management communication between the to require no management communication between the
modems beyond that inherent in the low-level EOC line modems beyond that inherent in the low-level EOC line
protocol as defined in ANSI T1E1.4/2000-006 (for HDSL2 protocol as defined in ANSI T1E1.4/2000-006 (for HDSL2
lines), or in ITU G.991.2 (for SHDSL lines)." lines), or in ITU G.991.2 (for SHDSL lines)."
-- NOTE TO RFC EDITOR: Please replace the following with the -- NOTE TO RFC EDITOR: Please replace the following with the
-- appropriate assigned 'transmission xxx' number -- appropriate assigned 'transmission xxx' number
::= { experimental 999999 } ::= { experimental 109 }
hdsl2ShdslLineMib OBJECT IDENTIFIER ::= { hdsl2ShdslMIB 1 } hdsl2ShdslLineMib OBJECT IDENTIFIER ::= { hdsl2ShdslMIB 1 }
hdsl2ShdslMibObjects OBJECT IDENTIFIER ::= { hdsl2ShdslLineMib 1 } hdsl2ShdslMibObjects OBJECT IDENTIFIER ::= { hdsl2ShdslLineMib 1 }
-- Textual Conventions used in this MIB -- Textual Conventions used in this MIB
-- --
Hdsl2ShdslPerfCurrDayCount ::= TEXTUAL-CONVENTION Hdsl2ShdslPerfCurrDayCount ::= TEXTUAL-CONVENTION
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A counter associated with interface performance "A counter associated with interface performance
measurements in a current 1-day (24 hour) measurement measurements in a current 1-day (24 hour) measurement
interval. interval.
Expires May 21, 2001 Page [12]
The value of this counter starts at zero at the The value of this counter starts at zero at the
beginning of an interval and is increased when beginning of an interval and is increased when
associated events occur, until the end of the associated events occur, until the end of the
1-day interval. At that time the value of the 1-day interval. At that time the value of the
counter is stored in the previous 1-day history counter is stored in the previous 1-day history
Expires July 26, 2001 Page [13]
interval, if available, and the current interval interval, if available, and the current interval
counter is restarted at zero. counter is restarted at zero.
In the case where the agent has no valid data available In the case where the agent has no valid data available
for this interval the corresponding object for this interval the corresponding object
instance is not available and upon a retrieval instance is not available and upon a retrieval
request a corresponding error message shall be request a corresponding error message shall be
returned to indicate that this instance does returned to indicate that this instance does
not exist (for example, a noSuchName error for not exist (for example, a noSuchName error for
SNMPv1 and a noSuchInstance for SNMPv2 GET SNMPv1 and a noSuchInstance for SNMPv2 GET
skipping to change at line 746 skipping to change at line 748
exceeds the maximum value, the agent will return exceeds the maximum value, the agent will return
the maximum value." the maximum value."
SYNTAX Gauge32 SYNTAX Gauge32
Hdsl2ShdslPerfIntervalThreshold ::= TEXTUAL-CONVENTION Hdsl2ShdslPerfIntervalThreshold ::= TEXTUAL-CONVENTION
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This convention defines a range of values "This convention defines a range of values
that may be set in a fault threshold alarm that may be set in a fault threshold alarm
control. As the number of seconds in a control. As the number of seconds in a
Expires May 21, 2001 Page [13]
15-minute interval numbers at most 900, objects 15-minute interval numbers at most 900, objects
of this type may have a range of 0...900, where of this type may have a range of 0...900, where
the value of 0 disables the alarm." the value of 0 disables the alarm."
SYNTAX INTEGER(0..900) SYNTAX INTEGER(0..900)
Hdsl2ShdslUnitId ::= TEXTUAL-CONVENTION Hdsl2ShdslUnitId ::= TEXTUAL-CONVENTION
Expires July 26, 2001 Page [14]
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This is the unique identification for all units "This is the unique identification for all units
in an HDSL2/SHDSL Span. It is based on the EOC in an HDSL2/SHDSL Span. It is based on the EOC
unit addressing scheme with reference to the xtuC." unit addressing scheme with reference to the xtuC."
SYNTAX INTEGER SYNTAX INTEGER
{ {
xtuC(1), xtuC(1),
xtuR(2), xtuR(2),
xru1(3), xru1(3),
skipping to change at line 800 skipping to change at line 802
Segment. HDSL2 only supports a single pair (wirePair1), Segment. HDSL2 only supports a single pair (wirePair1),
while SHDSL supports an optional second pair (wirePair2)." while SHDSL supports an optional second pair (wirePair2)."
SYNTAX INTEGER SYNTAX INTEGER
{ {
wirePair1(1), wirePair1(1),
wirePair2(2) wirePair2(2)
} }
Hdsl2ShdslTransmissionModeType ::= TEXTUAL-CONVENTION Hdsl2ShdslTransmissionModeType ::= TEXTUAL-CONVENTION
STATUS current STATUS current
Expires May 21, 2001 Page [14]
DESCRIPTION DESCRIPTION
"Contains the regional setting of the HDSL2/SHDSL span, "Contains the regional setting of the HDSL2/SHDSL span,
represented as a bit-map of possible settings. The various represented as a bit-map of possible settings. The various
bit positions are: bit positions are:
1 region 1 Indicates ITU-T G.991.2 Annex A. 1 region 1 Indicates ITU-T G.991.2 Annex A.
2 region 2 Indicates ITU-T G.991.2 Annex B. Expires July 26, 2001 Page [15]
2 region 2 Indicates ITU-T G.991.2 Annex B."
4 region 3 Indicates ITU-T G.991.2 Annex C."
SYNTAX Integer32 SYNTAX Integer32
-- Span Configuration Group -- Span Configuration Group
-- --
hdsl2ShdslSpanConfTable OBJECT-TYPE hdsl2ShdslSpanConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hdsl2ShdslSpanConfEntry SYNTAX SEQUENCE OF Hdsl2ShdslSpanConfEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
skipping to change at line 841 skipping to change at line 840
"An entry in the hdsl2ShdslSpanConfTable. Each entry "An entry in the hdsl2ShdslSpanConfTable. Each entry
represents the complete Span in a single HDSL2/SHDSL represents the complete Span in a single HDSL2/SHDSL
line. It is indexed by the ifIndex of the associated line. It is indexed by the ifIndex of the associated
HDSL2/SHDSL line." HDSL2/SHDSL line."
INDEX { ifIndex } INDEX { ifIndex }
::= { hdsl2ShdslSpanConfTable 1 } ::= { hdsl2ShdslSpanConfTable 1 }
Hdsl2ShdslSpanConfEntry ::= Hdsl2ShdslSpanConfEntry ::=
SEQUENCE SEQUENCE
{ {
hdsl2ShdslConfNumRepeaters INTEGER, hdsl2ShdslSpanConfNumRepeaters INTEGER,
hdsl2ShdslSpanConfProfile SnmpAdminString, hdsl2ShdslSpanConfProfile SnmpAdminString,
hdsl2ShdslSpanAlarmConfProfile SnmpAdminString hdsl2ShdslSpanConfAlarmProfile SnmpAdminString
} }
hdsl2ShdslConfNumRepeaters OBJECT-TYPE hdsl2ShdslSpanConfNumRepeaters OBJECT-TYPE
SYNTAX INTEGER(0..8) SYNTAX INTEGER(0..8)
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object provisions the number of repeaters/regenerators "This object provisions the number of repeaters/regenerators
in this HDSL2/SHDSL Span." in this HDSL2/SHDSL Span."
::= { hdsl2ShdslSpanConfEntry 1 } ::= { hdsl2ShdslSpanConfEntry 1 }
Expires May 21, 2001 Page [15]
hdsl2ShdslSpanConfProfile OBJECT-TYPE hdsl2ShdslSpanConfProfile OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32)) SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object is a pointer to a span configuration profile in "This object is a pointer to a span configuration profile in
the hdsl2ShdslSpanConfProfileTable, which applies to this span. the hdsl2ShdslSpanConfProfileTable, which applies to this span.
The value of this object is the index of the referenced profile The value of this object is the index of the referenced profile
in the hdsl2ShdslSpanConfProfileTable. Note that span in the hdsl2ShdslSpanConfProfileTable. Note that span
Expires July 26, 2001 Page [16]
configuration profiles are only applicable to SHDSL lines. configuration profiles are only applicable to SHDSL lines.
HDSL2 lines will not support this object. By default, this HDSL2 lines will not support this object. By default, this
object will have the value 'DEFVAL' (the index of the default object will have the value 'DEFVAL' (the index of the default
profile)." profile)."
::= { hdsl2ShdslSpanConfEntry 2 } ::= { hdsl2ShdslSpanConfEntry 2 }
hdsl2ShdslSpanAlarmConfProfile OBJECT-TYPE hdsl2ShdslSpanConfAlarmProfile OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32)) SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object is a pointer to an Alarm configuration profile in "This object is a pointer to an Alarm configuration profile in
the hdsl2ShdslEndpointAlarmConfProfileTable. The value of this the hdsl2ShdslEndpointAlarmConfProfileTable. The value of this
object is the index of the referenced profile in the object is the index of the referenced profile in the
hdsl2ShdslEndpointAlarmConfProfileTable. The alarm threshold hdsl2ShdslEndpointAlarmConfProfileTable. The alarm threshold
configuration in the referenced profile will be used by default configuration in the referenced profile will be used by default
for all segment endpoints in this span. Individual endpoints for all segment endpoints in this span. Individual endpoints
skipping to change at line 909 skipping to change at line 908
::= { hdsl2ShdslMibObjects 2 } ::= { hdsl2ShdslMibObjects 2 }
hdsl2ShdslSpanStatusEntry OBJECT-TYPE hdsl2ShdslSpanStatusEntry OBJECT-TYPE
SYNTAX Hdsl2ShdslSpanStatusEntry SYNTAX Hdsl2ShdslSpanStatusEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry in the hdsl2ShdslSpanStatusTable. Each entry "An entry in the hdsl2ShdslSpanStatusTable. Each entry
represents the complete span in a single HDSL2/SHDSL represents the complete span in a single HDSL2/SHDSL
line. It is indexed by the ifIndex of the associated line. It is indexed by the ifIndex of the associated
Expires May 21, 2001 Page [16]
HDSL2/SHDSL line." HDSL2/SHDSL line."
INDEX { ifIndex } INDEX { ifIndex }
::= { hdsl2ShdslSpanStatusTable 1 } ::= { hdsl2ShdslSpanStatusTable 1 }
Hdsl2ShdslSpanStatusEntry ::= Hdsl2ShdslSpanStatusEntry ::=
SEQUENCE SEQUENCE
{ {
hdsl2ShdslStatusNumAvailRepeaters INTEGER, hdsl2ShdslStatusNumAvailRepeaters INTEGER,
hdsl2ShdslStatusMaxAttainableLineRate Integer32, hdsl2ShdslStatusMaxAttainableLineRate Integer32,
hdsl2ShdslStatusActualLineRate Integer32, hdsl2ShdslStatusActualLineRate Integer32,
Expires July 26, 2001 Page [17]
hdsl2ShdslStatusTransmissionModeCurrent hdsl2ShdslStatusTransmissionModeCurrent
Hdsl2ShdslTransmissionModeType Hdsl2ShdslTransmissionModeType
} }
hdsl2ShdslStatusNumAvailRepeaters OBJECT-TYPE hdsl2ShdslStatusNumAvailRepeaters OBJECT-TYPE
SYNTAX INTEGER(0..8) SYNTAX INTEGER(0..8)
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Contains the actual number of repeaters/regenerators "Contains the actual number of repeaters/regenerators
discovered in this HDSL2/SHDSL span." discovered in this HDSL2/SHDSL span."
::= { hdsl2ShdslSpanStatusEntry 1 } ::= { hdsl2ShdslSpanStatusEntry 1 }
hdsl2ShdslStatusMaxAttainableLineRate OBJECT-TYPE hdsl2ShdslStatusMaxAttainableLineRate OBJECT-TYPE
SYNTAX Integer32 SYNTAX Integer32
UNITS "bps"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Contains the maximum attainable line rate in this HDSL2/SHDSL "Contains the maximum attainable line rate in this HDSL2/SHDSL
span." span."
::= { hdsl2ShdslSpanStatusEntry 2 } ::= { hdsl2ShdslSpanStatusEntry 2 }
hdsl2ShdslStatusActualLineRate OBJECT-TYPE hdsl2ShdslStatusActualLineRate OBJECT-TYPE
SYNTAX Integer32 SYNTAX Integer32
UNITS "bps"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Contains the actual line rate in this HDSL2/SHDSL span." "Contains the actual line rate in this HDSL2/SHDSL span."
::= { hdsl2ShdslSpanStatusEntry 3 } ::= { hdsl2ShdslSpanStatusEntry 3 }
hdsl2ShdslStatusTransmissionModeCurrent OBJECT-TYPE hdsl2ShdslStatusTransmissionModeCurrent OBJECT-TYPE
SYNTAX Hdsl2ShdslTransmissionModeType SYNTAX Hdsl2ShdslTransmissionModeType
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Contains the current PSD regional setting of the "Contains the current PSD regional setting of the
HDSL2/SHDSL span." HDSL2/SHDSL span."
::= { hdsl2ShdslSpanStatusEntry 4 } ::= { hdsl2ShdslSpanStatusEntry 4 }
-- Unit Inventory Group -- Unit Inventory Group
-- --
Expires May 21, 2001 Page [17]
hdsl2ShdslInventoryTable OBJECT-TYPE hdsl2ShdslInventoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hdsl2ShdslInventoryEntry SYNTAX SEQUENCE OF Hdsl2ShdslInventoryEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table supports retrieval of unit inventory information "This table supports retrieval of unit inventory information
available via the EOC from units in a HDSL2/SHDSL line." available via the EOC from units in a HDSL2/SHDSL line."
::= { hdsl2ShdslMibObjects 3 } ::= { hdsl2ShdslMibObjects 3 }
Expires July 26, 2001 Page [18]
hdsl2ShdslInventoryEntry OBJECT-TYPE hdsl2ShdslInventoryEntry OBJECT-TYPE
SYNTAX Hdsl2ShdslInventoryEntry SYNTAX Hdsl2ShdslInventoryEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry in the hdsl2ShdslInventoryTable. Each entry "An entry in the hdsl2ShdslInventoryTable. Each entry
represents inventory information for a single unit in a represents inventory information for a single unit in a
HDSL2/SHDSL line. It is indexed by the ifIndex of the HDSL2/SHDSL line. It is indexed by the ifIndex of the
HDSL2/SHDSL line and the Hdsl2ShdslUnitId of the HDSL2/SHDSL line and the Hdsl2ShdslUnitId of the
associated unit." associated unit."
skipping to change at line 1014 skipping to change at line 1015
hdsl2ShdslInvIndex OBJECT-TYPE hdsl2ShdslInvIndex OBJECT-TYPE
SYNTAX Hdsl2ShdslUnitId SYNTAX Hdsl2ShdslUnitId
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The index into the hdsl2ShdslInventoryTable." "The index into the hdsl2ShdslInventoryTable."
::= { hdsl2ShdslInventoryEntry 1 } ::= { hdsl2ShdslInventoryEntry 1 }
hdsl2ShdslInvVendorID OBJECT-TYPE hdsl2ShdslInvVendorID OBJECT-TYPE
SYNTAX OCTET STRING(SIZE(9)) SYNTAX OCTET STRING(SIZE(8))
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
Expires May 21, 2001 Page [18]
DESCRIPTION DESCRIPTION
"Vendor ID as reported in an Inventory Response message. "Vendor ID as reported in an Inventory Response message."
Note that there is a variance between G.994.1 and G.991.2
as to the contents of this field (8 octets vs. 8.5 octets
respectively). In all cases, this object should report
the Vendor ID as reported by the inventoried unit. The
Vendor ID MUST be right-aligned with respect to the
entirety of the octet string, resulting in the high order
nibble of the first octet being zero.
"
::= { hdsl2ShdslInventoryEntry 2 } ::= { hdsl2ShdslInventoryEntry 2 }
hdsl2ShdslInvVendorModelNumber OBJECT-TYPE hdsl2ShdslInvVendorModelNumber OBJECT-TYPE
SYNTAX DisplayString SYNTAX DisplayString
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Vendor model number as reported in an Inventory Response "Vendor model number as reported in an Inventory Response
Expires July 26, 2001 Page [19]
message." message."
::= { hdsl2ShdslInventoryEntry 3 } ::= { hdsl2ShdslInventoryEntry 3 }
hdsl2ShdslInvVendorSerialNumber OBJECT-TYPE hdsl2ShdslInvVendorSerialNumber OBJECT-TYPE
SYNTAX DisplayString SYNTAX DisplayString
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Vendor serial number as reported in an Inventory Response "Vendor serial number as reported in an Inventory Response
message." message."
skipping to change at line 1071 skipping to change at line 1064
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Version of the HDSL2/SHDSL standard implemented, as reported "Version of the HDSL2/SHDSL standard implemented, as reported
in an Inventory Response message." in an Inventory Response message."
::= { hdsl2ShdslInventoryEntry 6 } ::= { hdsl2ShdslInventoryEntry 6 }
hdsl2ShdslInvVendorListNumber OBJECT-TYPE hdsl2ShdslInvVendorListNumber OBJECT-TYPE
SYNTAX DisplayString SYNTAX DisplayString
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
Expires May 21, 2001 Page [19]
DESCRIPTION DESCRIPTION
"Vendor list number as reported in an Inventory Response "Vendor list number as reported in an Inventory Response
message." message."
::= { hdsl2ShdslInventoryEntry 7 } ::= { hdsl2ShdslInventoryEntry 7 }
hdsl2ShdslInvVendorIssueNumber OBJECT-TYPE hdsl2ShdslInvVendorIssueNumber OBJECT-TYPE
SYNTAX DisplayString SYNTAX DisplayString
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Vendor issue number as reported in an Inventory Response "Vendor issue number as reported in an Inventory Response
message." message."
::= { hdsl2ShdslInventoryEntry 8 } ::= { hdsl2ShdslInventoryEntry 8 }
hdsl2ShdslInvVendorSoftwareVersion OBJECT-TYPE hdsl2ShdslInvVendorSoftwareVersion OBJECT-TYPE
SYNTAX DisplayString SYNTAX DisplayString
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
Expires July 26, 2001 Page [20]
"Vendor software version as reported in an Inventory "Vendor software version as reported in an Inventory
Response message." Response message."
::= { hdsl2ShdslInventoryEntry 9 } ::= { hdsl2ShdslInventoryEntry 9 }
hdsl2ShdslInvEquipmentCode OBJECT-TYPE hdsl2ShdslInvEquipmentCode OBJECT-TYPE
SYNTAX DisplayString SYNTAX DisplayString
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Equipment code conforming to ANSI T1.213, Coded Identification "Equipment code conforming to ANSI T1.213, Coded Identification
skipping to change at line 1125 skipping to change at line 1118
SYNTAX Hdsl2ShdslTransmissionModeType SYNTAX Hdsl2ShdslTransmissionModeType
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Contains the transmission mode capability of the SHDSL unit." "Contains the transmission mode capability of the SHDSL unit."
::= { hdsl2ShdslInventoryEntry 12 } ::= { hdsl2ShdslInventoryEntry 12 }
-- Segment Endpoint Configuration Group -- Segment Endpoint Configuration Group
-- --
Expires May 21, 2001 Page [20]
hdsl2ShdslEndpointConfTable OBJECT-TYPE hdsl2ShdslEndpointConfTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hdsl2ShdslEndpointConfEntry SYNTAX SEQUENCE OF Hdsl2ShdslEndpointConfEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table supports configuration parameters for segment "This table supports configuration parameters for segment
endpoints in a HDSL2/SHDSL line." endpoints in a HDSL2/SHDSL line."
::= { hdsl2ShdslMibObjects 4 } ::= { hdsl2ShdslMibObjects 4 }
hdsl2ShdslEndpointConfEntry OBJECT-TYPE hdsl2ShdslEndpointConfEntry OBJECT-TYPE
SYNTAX Hdsl2ShdslEndpointConfEntry SYNTAX Hdsl2ShdslEndpointConfEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry in the hdsl2ShdslEndpointConfTable. Each entry "An entry in the hdsl2ShdslEndpointConfTable. Each entry
represents a single segment endpoint in a HDSL2/SHDSL line. represents a single segment endpoint in a HDSL2/SHDSL line.
It is indexed by the ifIndex of the HDSL2/SHDSL line, the It is indexed by the ifIndex of the HDSL2/SHDSL line, the
UnitId of the associated unit, the side of the unit, and the UnitId of the associated unit, the side of the unit, and the
wire-pair of the associated modem." wire-pair of the associated modem."
INDEX { ifIndex, hdsl2ShdslInvIndex, hdsl2ShdslEndpointSide, INDEX { ifIndex, hdsl2ShdslInvIndex, hdsl2ShdslEndpointSide,
Expires July 26, 2001 Page [21]
hdsl2ShdslEndpointWirePair} hdsl2ShdslEndpointWirePair}
::= { hdsl2ShdslEndpointConfTable 1 } ::= { hdsl2ShdslEndpointConfTable 1 }
Hdsl2ShdslEndpointConfEntry ::= Hdsl2ShdslEndpointConfEntry ::=
SEQUENCE SEQUENCE
{ {
hdsl2ShdslEndpointSide Hdsl2ShdslUnitSide, hdsl2ShdslEndpointSide Hdsl2ShdslUnitSide,
hdsl2ShdslEndpointWirePair Hdsl2ShdslWirePair, hdsl2ShdslEndpointWirePair Hdsl2ShdslWirePair,
hdsl2ShdslEndpointAlarmConfProfile SnmpAdminString hdsl2ShdslEndpointAlarmConfProfile SnmpAdminString
} }
skipping to change at line 1179 skipping to change at line 1172
SYNTAX Hdsl2ShdslWirePair SYNTAX Hdsl2ShdslWirePair
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The wire-pair of the modem associated with this segment "The wire-pair of the modem associated with this segment
endpoint as per the Hdsl2ShdslWirePair textual convention." endpoint as per the Hdsl2ShdslWirePair textual convention."
::= { hdsl2ShdslEndpointConfEntry 2 } ::= { hdsl2ShdslEndpointConfEntry 2 }
hdsl2ShdslEndpointAlarmConfProfile OBJECT-TYPE hdsl2ShdslEndpointAlarmConfProfile OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..32)) SYNTAX SnmpAdminString (SIZE(0..32))
Expires May 21, 2001 Page [21]
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object configures the alarm threshold values to be "This object configures the alarm threshold values to be
used for this segment endpoint. The values are obtained used for this segment endpoint. The values are obtained
from the alarm configuration profile referenced by this from the alarm configuration profile referenced by this
object. The value of this object is the index of the object. The value of this object is the index of the
referenced profile in the hdsl2ShdslLineAlarmConfProfileTable, referenced profile in the hdsl2ShdslLineAlarmConfProfileTable,
or NULL (a string of length 0). If the value is NULL, the or NULL (a string of length 0). If the value is NULL, the
endpoint uses the default Alarm Configuration Profile for the endpoint uses the default Alarm Configuration Profile for the
associated span as per the hdsl2ShdslSpanAlarmConfProfile associated span as per the hdsl2ShdslSpanConfAlarmProfile
object in the hdsl2ShdslSpanConfTable. The default value of object in the hdsl2ShdslSpanConfTable. The default value of
this object is NULL. this object is NULL."
::= { hdsl2ShdslEndpointConfEntry 3 } ::= { hdsl2ShdslEndpointConfEntry 3 }
-- Segment Endpoint Current Status/Performance Group -- Segment Endpoint Current Status/Performance Group
-- --
hdsl2ShdslEndpointCurrTable OBJECT-TYPE hdsl2ShdslEndpointCurrTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hdsl2ShdslEndpointCurrEntry SYNTAX SEQUENCE OF Hdsl2ShdslEndpointCurrEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
Expires July 26, 2001 Page [22]
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table contains current status and performance information "This table contains current status and performance information
for segment endpoints in HDSL2/SHDSL Lines." for segment endpoints in HDSL2/SHDSL Lines."
::= { hdsl2ShdslMibObjects 5 } ::= { hdsl2ShdslMibObjects 5 }
hdsl2ShdslEndpointCurrEntry OBJECT-TYPE hdsl2ShdslEndpointCurrEntry OBJECT-TYPE
SYNTAX Hdsl2ShdslEndpointCurrEntry SYNTAX Hdsl2ShdslEndpointCurrEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
skipping to change at line 1232 skipping to change at line 1225
Hdsl2ShdslEndpointCurrEntry ::= Hdsl2ShdslEndpointCurrEntry ::=
SEQUENCE SEQUENCE
{ {
hdsl2ShdslEndpointCurrAtn Integer32, hdsl2ShdslEndpointCurrAtn Integer32,
hdsl2ShdslEndpointCurrSnrMgn Integer32, hdsl2ShdslEndpointCurrSnrMgn Integer32,
hdsl2ShdslEndpointCurrStatus Integer32, hdsl2ShdslEndpointCurrStatus Integer32,
hdsl2ShdslEndpointES Counter32, hdsl2ShdslEndpointES Counter32,
hdsl2ShdslEndpointSES Counter32, hdsl2ShdslEndpointSES Counter32,
hdsl2ShdslEndpointCRCanomalies Counter32, hdsl2ShdslEndpointCRCanomalies Counter32,
Expires May 21, 2001 Page [22]
hdsl2ShdslEndpointLOSWS Counter32, hdsl2ShdslEndpointLOSWS Counter32,
hdsl2ShdslEndpointUAS Counter32, hdsl2ShdslEndpointUAS Counter32,
hdsl2ShdslEndpointCurr15MinTimeElapsed Hdsl2ShdslPerfTimeElapsed, hdsl2ShdslEndpointCurr15MinTimeElapsed Hdsl2ShdslPerfTimeElapsed,
hdsl2ShdslEndpointCurr15MinES PerfCurrentCount, hdsl2ShdslEndpointCurr15MinES PerfCurrentCount,
hdsl2ShdslEndpointCurr15MinSES PerfCurrentCount, hdsl2ShdslEndpointCurr15MinSES PerfCurrentCount,
hdsl2ShdslEndpointCurr15MinCRCanomalies PerfCurrentCount, hdsl2ShdslEndpointCurr15MinCRCanomalies PerfCurrentCount,
hdsl2ShdslEndpointCurr15MinLOSWS PerfCurrentCount, hdsl2ShdslEndpointCurr15MinLOSWS PerfCurrentCount,
hdsl2ShdslEndpointCurr15MinUAS PerfCurrentCount, hdsl2ShdslEndpointCurr15MinUAS PerfCurrentCount,
hdsl2ShdslEndpointCurr1DayTimeElapsed Hdsl2ShdslPerfTimeElapsed, hdsl2ShdslEndpointCurr1DayTimeElapsed Hdsl2ShdslPerfTimeElapsed,
hdsl2ShdslEndpointCurr1DayES Hdsl2ShdslPerfCurrDayCount, hdsl2ShdslEndpointCurr1DayES Hdsl2ShdslPerfCurrDayCount,
skipping to change at line 1257 skipping to change at line 1248
hdsl2ShdslEndpointCurr1DayUAS Hdsl2ShdslPerfCurrDayCount hdsl2ShdslEndpointCurr1DayUAS Hdsl2ShdslPerfCurrDayCount
} }
hdsl2ShdslEndpointCurrAtn OBJECT-TYPE hdsl2ShdslEndpointCurrAtn OBJECT-TYPE
SYNTAX Integer32 SYNTAX Integer32
UNITS "dB" UNITS "dB"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The current loop attenuation for this endpoint as "The current loop attenuation for this endpoint as
Expires July 26, 2001 Page [23]
reported in a Network or Customer Side Performance reported in a Network or Customer Side Performance
Status message." Status message."
::= { hdsl2ShdslEndpointCurrEntry 1 } ::= { hdsl2ShdslEndpointCurrEntry 1 }
hdsl2ShdslEndpointCurrSnrMgn OBJECT-TYPE hdsl2ShdslEndpointCurrSnrMgn OBJECT-TYPE
SYNTAX Integer32 SYNTAX Integer32
UNITS "dB" UNITS "dB"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
skipping to change at line 1286 skipping to change at line 1279
"Contains the current state of the endpoint. This is a "Contains the current state of the endpoint. This is a
bit-map of possible conditions. The various bit positions bit-map of possible conditions. The various bit positions
are: are:
1 noDefect There no defects on the line 1 noDefect There no defects on the line
2 powerBackoff Indicates enhanced Power Backoff 2 powerBackoff Indicates enhanced Power Backoff
4 deviceFault Indicates a vendor-dependent 4 deviceFault Indicates a vendor-dependent
detection of diagnostics or detection of diagnostics or
Expires May 21, 2001 Page [23]
self-test results self-test results
8 dcContinuityFault Indicates vendor-dependent 8 dcContinuityFault Indicates vendor-dependent
conditions that interfere with conditions that interfere with
span powering such as short and span powering such as short and
open circuits open circuits
16 snrMarginAlarm Indicates that the SNR margin 16 snrMarginAlarm Indicates that the SNR margin
has exceeded the alarm threshold has dropped below the alarm threshold
32 loopAttenuationAlarm Indicates that the loop attentuation 32 loopAttenuationAlarm Indicates that the loop attentuation
has exceeded the alarm threshold has dropped below the alarm threshold
64 loswFailureAlarm Indicates a forward LOSW alarm 64 loswFailureAlarm Indicates a forward LOSW alarm
128 configInitFailure Endpoint failure during initialization 128 configInitFailure Endpoint failure during initialization
due to paired endpoint not able to due to paired endpoint not able to
support requested configuration support requested configuration
256 protocolInitFailure Endpoint failure during initialization 256 protocolInitFailure Endpoint failure during initialization
due to incompatible protocol used by due to incompatible protocol used by
the paired endpoint. the paired endpoint.
512 noNeighborPresent Endpoint failure during initialization 512 noNeighborPresent Endpoint failure during initialization
Expires July 26, 2001 Page [24]
due to no activation sequence detected due to no activation sequence detected
from paired endpoint. from paired endpoint.
1024 loopbackActive A loopback is currently active at this 1024 loopbackActive A loopback is currently active at this
Segment Endpoint. Segment Endpoint.
This is intended to supplement ifOperStatus." This is intended to supplement ifOperStatus."
::= { hdsl2ShdslEndpointCurrEntry 3 } ::= { hdsl2ShdslEndpointCurrEntry 3 }
hdsl2ShdslEndpointES OBJECT-TYPE hdsl2ShdslEndpointES OBJECT-TYPE
skipping to change at line 1341 skipping to change at line 1334
hdsl2ShdslEndpointSES OBJECT-TYPE hdsl2ShdslEndpointSES OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Count of Severely Errored Seconds (SES) on this endpoint "Count of Severely Errored Seconds (SES) on this endpoint
since the xU was last restarted." since the xU was last restarted."
::= { hdsl2ShdslEndpointCurrEntry 5 } ::= { hdsl2ShdslEndpointCurrEntry 5 }
Expires May 21, 2001 Page [24]
hdsl2ShdslEndpointCRCanomalies OBJECT-TYPE hdsl2ShdslEndpointCRCanomalies OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Count of CRC anomalies on this endpoint since the xU was "Count of CRC anomalies on this endpoint since the xU was
last restarted." last restarted."
::= { hdsl2ShdslEndpointCurrEntry 6 } ::= { hdsl2ShdslEndpointCurrEntry 6 }
hdsl2ShdslEndpointLOSWS OBJECT-TYPE hdsl2ShdslEndpointLOSWS OBJECT-TYPE
skipping to change at line 1367 skipping to change at line 1358
DESCRIPTION DESCRIPTION
"Count of Loss of Sync Word (LOSW) Seconds on this endpoint "Count of Loss of Sync Word (LOSW) Seconds on this endpoint
since the xU was last restarted." since the xU was last restarted."
::= { hdsl2ShdslEndpointCurrEntry 7 } ::= { hdsl2ShdslEndpointCurrEntry 7 }
hdsl2ShdslEndpointUAS OBJECT-TYPE hdsl2ShdslEndpointUAS OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
Expires July 26, 2001 Page [25]
DESCRIPTION DESCRIPTION
"Count of Unavailable Seconds (UAS) on this endpoint since "Count of Unavailable Seconds (UAS) on this endpoint since
the xU was last restarted." the xU was last restarted."
::= { hdsl2ShdslEndpointCurrEntry 8 } ::= { hdsl2ShdslEndpointCurrEntry 8 }
hdsl2ShdslEndpointCurr15MinTimeElapsed OBJECT-TYPE hdsl2ShdslEndpointCurr15MinTimeElapsed OBJECT-TYPE
SYNTAX Hdsl2ShdslPerfTimeElapsed SYNTAX Hdsl2ShdslPerfTimeElapsed
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
skipping to change at line 1395 skipping to change at line 1388
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Count of Errored Seconds (ES) in the current 15-minute "Count of Errored Seconds (ES) in the current 15-minute
interval." interval."
::= { hdsl2ShdslEndpointCurrEntry 10 } ::= { hdsl2ShdslEndpointCurrEntry 10 }
hdsl2ShdslEndpointCurr15MinSES OBJECT-TYPE hdsl2ShdslEndpointCurr15MinSES OBJECT-TYPE
SYNTAX PerfCurrentCount SYNTAX PerfCurrentCount
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
Expires May 21, 2001 Page [25]
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Count of Severely Errored Seconds (SES) in the current "Count of Severely Errored Seconds (SES) in the current
15-minute interval." 15-minute interval."
::= { hdsl2ShdslEndpointCurrEntry 11 } ::= { hdsl2ShdslEndpointCurrEntry 11 }
hdsl2ShdslEndpointCurr15MinCRCanomalies OBJECT-TYPE hdsl2ShdslEndpointCurr15MinCRCanomalies OBJECT-TYPE
SYNTAX PerfCurrentCount SYNTAX PerfCurrentCount
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
skipping to change at line 1422 skipping to change at line 1413
SYNTAX PerfCurrentCount SYNTAX PerfCurrentCount
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Count of Loss of Sync Word (LOSW) Seconds in the current "Count of Loss of Sync Word (LOSW) Seconds in the current
15-minute interval." 15-minute interval."
::= { hdsl2ShdslEndpointCurrEntry 13 } ::= { hdsl2ShdslEndpointCurrEntry 13 }
hdsl2ShdslEndpointCurr15MinUAS OBJECT-TYPE hdsl2ShdslEndpointCurr15MinUAS OBJECT-TYPE
Expires July 26, 2001 Page [26]
SYNTAX PerfCurrentCount SYNTAX PerfCurrentCount
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Count of Unavailable Seconds (UAS) in the current 15-minute "Count of Unavailable Seconds (UAS) in the current 15-minute
interval." interval."
::= { hdsl2ShdslEndpointCurrEntry 14 } ::= { hdsl2ShdslEndpointCurrEntry 14 }
hdsl2ShdslEndpointCurr1DayTimeElapsed OBJECT-TYPE hdsl2ShdslEndpointCurr1DayTimeElapsed OBJECT-TYPE
skipping to change at line 1449 skipping to change at line 1442
::= { hdsl2ShdslEndpointCurrEntry 15 } ::= { hdsl2ShdslEndpointCurrEntry 15 }
hdsl2ShdslEndpointCurr1DayES OBJECT-TYPE hdsl2ShdslEndpointCurr1DayES OBJECT-TYPE
SYNTAX Hdsl2ShdslPerfCurrDayCount SYNTAX Hdsl2ShdslPerfCurrDayCount
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Count of Errored Seconds (ES) during the current day as "Count of Errored Seconds (ES) during the current day as
measured by hdsl2ShdslEndpointCurr1DayTimeElapsed." measured by hdsl2ShdslEndpointCurr1DayTimeElapsed."
Expires May 21, 2001 Page [26]
::= { hdsl2ShdslEndpointCurrEntry 16 } ::= { hdsl2ShdslEndpointCurrEntry 16 }
hdsl2ShdslEndpointCurr1DaySES OBJECT-TYPE hdsl2ShdslEndpointCurr1DaySES OBJECT-TYPE
SYNTAX Hdsl2ShdslPerfCurrDayCount SYNTAX Hdsl2ShdslPerfCurrDayCount
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Count of Severely Errored Seconds (SES) during the current "Count of Severely Errored Seconds (SES) during the current
day as measured by hdsl2ShdslEndpointCurr1DayTimeElapsed." day as measured by hdsl2ShdslEndpointCurr1DayTimeElapsed."
skipping to change at line 1477 skipping to change at line 1468
DESCRIPTION DESCRIPTION
"Count of CRC anomalies during the current day as measured "Count of CRC anomalies during the current day as measured
by hdsl2ShdslEndpointCurr1DayTimeElapsed." by hdsl2ShdslEndpointCurr1DayTimeElapsed."
::= { hdsl2ShdslEndpointCurrEntry 18 } ::= { hdsl2ShdslEndpointCurrEntry 18 }
hdsl2ShdslEndpointCurr1DayLOSWS OBJECT-TYPE hdsl2ShdslEndpointCurr1DayLOSWS OBJECT-TYPE
SYNTAX Hdsl2ShdslPerfCurrDayCount SYNTAX Hdsl2ShdslPerfCurrDayCount
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
Expires July 26, 2001 Page [27]
DESCRIPTION DESCRIPTION
"Count of Loss of Sync Word Seconds (LOSWS) during the current "Count of Loss of Sync Word (LOSW) Seconds during the current
day as measured by hdsl2ShdslEndpointCurr1DayTimeElapsed." day as measured by hdsl2ShdslEndpointCurr1DayTimeElapsed."
::= { hdsl2ShdslEndpointCurrEntry 19 } ::= { hdsl2ShdslEndpointCurrEntry 19 }
hdsl2ShdslEndpointCurr1DayUAS OBJECT-TYPE hdsl2ShdslEndpointCurr1DayUAS OBJECT-TYPE
SYNTAX Hdsl2ShdslPerfCurrDayCount SYNTAX Hdsl2ShdslPerfCurrDayCount
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Count of Unavailable Seconds (UAS) during the current "Count of Unavailable Seconds (UAS) during the current
skipping to change at line 1504 skipping to change at line 1497
hdsl2Shdsl15MinIntervalTable OBJECT-TYPE hdsl2Shdsl15MinIntervalTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hdsl2Shdsl15MinIntervalEntry SYNTAX SEQUENCE OF Hdsl2Shdsl15MinIntervalEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table provides one row for each HDSL2/SHDSL endpoint "This table provides one row for each HDSL2/SHDSL endpoint
performance data collection interval." performance data collection interval."
::= { hdsl2ShdslMibObjects 6 } ::= { hdsl2ShdslMibObjects 6 }
Expires May 21, 2001 Page [27]
hdsl2Shdsl15MinIntervalEntry OBJECT-TYPE hdsl2Shdsl15MinIntervalEntry OBJECT-TYPE
SYNTAX Hdsl2Shdsl15MinIntervalEntry SYNTAX Hdsl2Shdsl15MinIntervalEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry in the hdsl2Shdsl15MinIntervalTable." "An entry in the hdsl2Shdsl15MinIntervalTable."
INDEX { ifIndex, hdsl2ShdslInvIndex, hdsl2ShdslEndpointSide, INDEX { ifIndex, hdsl2ShdslInvIndex, hdsl2ShdslEndpointSide,
hdsl2ShdslEndpointWirePair, hdsl2Shdsl15MinIntervalNumber} hdsl2ShdslEndpointWirePair, hdsl2Shdsl15MinIntervalNumber}
::= { hdsl2Shdsl15MinIntervalTable 1 } ::= { hdsl2Shdsl15MinIntervalTable 1 }
skipping to change at line 1532 skipping to change at line 1523
hdsl2Shdsl15MinIntervalCRCanomalies PerfIntervalCount, hdsl2Shdsl15MinIntervalCRCanomalies PerfIntervalCount,
hdsl2Shdsl15MinIntervalLOSWS PerfIntervalCount, hdsl2Shdsl15MinIntervalLOSWS PerfIntervalCount,
hdsl2Shdsl15MinIntervalUAS PerfIntervalCount hdsl2Shdsl15MinIntervalUAS PerfIntervalCount
} }
hdsl2Shdsl15MinIntervalNumber OBJECT-TYPE hdsl2Shdsl15MinIntervalNumber OBJECT-TYPE
SYNTAX INTEGER(1..96) SYNTAX INTEGER(1..96)
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
Expires July 26, 2001 Page [28]
"Performance Data Interval number. 1 is the the most recent "Performance Data Interval number. 1 is the the most recent
previous interval; interval 96 is 24 hours ago. Intervals previous interval; interval 96 is 24 hours ago. Intervals
2..96 are optional." 2..96 are optional."
::= { hdsl2Shdsl15MinIntervalEntry 1 } ::= { hdsl2Shdsl15MinIntervalEntry 1 }
hdsl2Shdsl15MinIntervalES OBJECT-TYPE hdsl2Shdsl15MinIntervalES OBJECT-TYPE
SYNTAX PerfIntervalCount SYNTAX PerfIntervalCount
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
skipping to change at line 1558 skipping to change at line 1551
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Count of Severely Errored Seconds (SES) during the "Count of Severely Errored Seconds (SES) during the
interval." interval."
::= { hdsl2Shdsl15MinIntervalEntry 3 } ::= { hdsl2Shdsl15MinIntervalEntry 3 }
hdsl2Shdsl15MinIntervalCRCanomalies OBJECT-TYPE hdsl2Shdsl15MinIntervalCRCanomalies OBJECT-TYPE
SYNTAX PerfIntervalCount SYNTAX PerfIntervalCount
Expires May 21, 2001 Page [28]
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Count of CRC anomalies during the interval." "Count of CRC anomalies during the interval."
::= { hdsl2Shdsl15MinIntervalEntry 4 } ::= { hdsl2Shdsl15MinIntervalEntry 4 }
hdsl2Shdsl15MinIntervalLOSWS OBJECT-TYPE hdsl2Shdsl15MinIntervalLOSWS OBJECT-TYPE
SYNTAX PerfIntervalCount SYNTAX PerfIntervalCount
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
skipping to change at line 1587 skipping to change at line 1578
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Count of Unavailable Seconds (UAS) during the interval." "Count of Unavailable Seconds (UAS) during the interval."
::= { hdsl2Shdsl15MinIntervalEntry 6 } ::= { hdsl2Shdsl15MinIntervalEntry 6 }
-- Segment Endpoint 1-Day Interval Status/Performance Group -- Segment Endpoint 1-Day Interval Status/Performance Group
-- --
Expires July 26, 2001 Page [29]
hdsl2Shdsl1DayIntervalTable OBJECT-TYPE hdsl2Shdsl1DayIntervalTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hdsl2Shdsl1DayIntervalEntry SYNTAX SEQUENCE OF Hdsl2Shdsl1DayIntervalEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table provides one row for each HDSL2/SHDSL endpoint "This table provides one row for each HDSL2/SHDSL endpoint
performance data collection interval." performance data collection interval."
::= { hdsl2ShdslMibObjects 7 } ::= { hdsl2ShdslMibObjects 7 }
hdsl2Shdsl1DayIntervalEntry OBJECT-TYPE hdsl2Shdsl1DayIntervalEntry OBJECT-TYPE
SYNTAX Hdsl2Shdsl1DayIntervalEntry SYNTAX Hdsl2Shdsl1DayIntervalEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry in the hdsl2Shdsl1DayIntervalTable." "An entry in the hdsl2Shdsl1DayIntervalTable."
INDEX { ifIndex, hdsl2ShdslInvIndex, hdsl2ShdslEndpointSide, INDEX { ifIndex, hdsl2ShdslInvIndex, hdsl2ShdslEndpointSide,
hdsl2ShdslEndpointWirePair, hdsl2Shdsl1DayIntervalInterval } hdsl2ShdslEndpointWirePair, hdsl2Shdsl1DayIntervalNumber }
::= { hdsl2Shdsl1DayIntervalTable 1 } ::= { hdsl2Shdsl1DayIntervalTable 1 }
Hdsl2Shdsl1DayIntervalEntry ::= Hdsl2Shdsl1DayIntervalEntry ::=
SEQUENCE SEQUENCE
{ {
hdsl2Shdsl1DayIntervalInterval INTEGER, hdsl2Shdsl1DayIntervalNumber INTEGER,
hdsl2Shdsl1DayIntervalMoniSecs Hdsl2ShdslPerfTimeElapsed, hdsl2Shdsl1DayIntervalMoniSecs Hdsl2ShdslPerfTimeElapsed,
hdsl2Shdsl1DayIntervalES Hdsl2Shdsl1DayIntervalCount, hdsl2Shdsl1DayIntervalES Hdsl2Shdsl1DayIntervalCount,
Expires May 21, 2001 Page [29]
hdsl2Shdsl1DayIntervalSES Hdsl2Shdsl1DayIntervalCount, hdsl2Shdsl1DayIntervalSES Hdsl2Shdsl1DayIntervalCount,
hdsl2Shdsl1DayIntervalCRCanomalies Hdsl2Shdsl1DayIntervalCount, hdsl2Shdsl1DayIntervalCRCanomalies Hdsl2Shdsl1DayIntervalCount,
hdsl2Shdsl1DayIntervalLOSWS Hdsl2Shdsl1DayIntervalCount, hdsl2Shdsl1DayIntervalLOSWS Hdsl2Shdsl1DayIntervalCount,
hdsl2Shdsl1DayIntervalUAS Hdsl2Shdsl1DayIntervalCount hdsl2Shdsl1DayIntervalUAS Hdsl2Shdsl1DayIntervalCount
} }
hdsl2Shdsl1DayIntervalInterval OBJECT-TYPE hdsl2Shdsl1DayIntervalNumber OBJECT-TYPE
SYNTAX INTEGER(1..30) SYNTAX INTEGER(1..30)
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"History Data Interval number. Interval 1 is the the most "History Data Interval number. Interval 1 is the the most
recent previous day; interval 30 is 30 days ago. Intervals recent previous day; interval 30 is 30 days ago. Intervals
2..30 are optional." 2..30 are optional."
::= { hdsl2Shdsl1DayIntervalEntry 1 } ::= { hdsl2Shdsl1DayIntervalEntry 1 }
hdsl2Shdsl1DayIntervalMoniSecs OBJECT-TYPE hdsl2Shdsl1DayIntervalMoniSecs OBJECT-TYPE
skipping to change at line 1642 skipping to change at line 1633
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The amount of time in the 1-day interval over which the "The amount of time in the 1-day interval over which the
performance monitoring information is actually counted. performance monitoring information is actually counted.
This value will be the same as the interval duration except This value will be the same as the interval duration except
in a situation where performance monitoring data could not in a situation where performance monitoring data could not
be collected for any reason." be collected for any reason."
::= { hdsl2Shdsl1DayIntervalEntry 2 } ::= { hdsl2Shdsl1DayIntervalEntry 2 }
Expires July 26, 2001 Page [30]
hdsl2Shdsl1DayIntervalES OBJECT-TYPE hdsl2Shdsl1DayIntervalES OBJECT-TYPE
SYNTAX Hdsl2Shdsl1DayIntervalCount SYNTAX Hdsl2Shdsl1DayIntervalCount
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Count of Errored Seconds (ES) during the 1-day interval as "Count of Errored Seconds (ES) during the 1-day interval as
measured by hdsl2Shdsl1DayIntervalMoniSecs." measured by hdsl2Shdsl1DayIntervalMoniSecs."
::= { hdsl2Shdsl1DayIntervalEntry 3 } ::= { hdsl2Shdsl1DayIntervalEntry 3 }
skipping to change at line 1666 skipping to change at line 1659
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Count of Severely Errored Seconds (SES) during the 1-day "Count of Severely Errored Seconds (SES) during the 1-day
interval as measured by hdsl2Shdsl1DayIntervalMoniSecs." interval as measured by hdsl2Shdsl1DayIntervalMoniSecs."
::= { hdsl2Shdsl1DayIntervalEntry 4 } ::= { hdsl2Shdsl1DayIntervalEntry 4 }
hdsl2Shdsl1DayIntervalCRCanomalies OBJECT-TYPE hdsl2Shdsl1DayIntervalCRCanomalies OBJECT-TYPE
SYNTAX Hdsl2Shdsl1DayIntervalCount SYNTAX Hdsl2Shdsl1DayIntervalCount
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
Expires May 21, 2001 Page [30]
DESCRIPTION DESCRIPTION
"Count of CRC anomalies during the 1-day interval as "Count of CRC anomalies during the 1-day interval as
measured by hdsl2Shdsl1DayIntervalMoniSecs." measured by hdsl2Shdsl1DayIntervalMoniSecs."
::= { hdsl2Shdsl1DayIntervalEntry 5 } ::= { hdsl2Shdsl1DayIntervalEntry 5 }
hdsl2Shdsl1DayIntervalLOSWS OBJECT-TYPE hdsl2Shdsl1DayIntervalLOSWS OBJECT-TYPE
SYNTAX Hdsl2Shdsl1DayIntervalCount SYNTAX Hdsl2Shdsl1DayIntervalCount
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
skipping to change at line 1697 skipping to change at line 1688
DESCRIPTION DESCRIPTION
"Count of Unavailable Seconds (UAS) during the 1-day interval "Count of Unavailable Seconds (UAS) during the 1-day interval
as measured by hdsl2Shdsl1DayIntervalMoniSecs." as measured by hdsl2Shdsl1DayIntervalMoniSecs."
::= { hdsl2Shdsl1DayIntervalEntry 7 } ::= { hdsl2Shdsl1DayIntervalEntry 7 }
-- Maintenance Group -- Maintenance Group
-- --
hdsl2ShdslEndpointMaintTable OBJECT-TYPE hdsl2ShdslEndpointMaintTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hdsl2ShdslEndpointMaintEntry SYNTAX SEQUENCE OF Hdsl2ShdslEndpointMaintEntry
Expires July 26, 2001 Page [31]
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table supports maintenance operations (eg. loopbacks) "This table supports maintenance operations (eg. loopbacks)
to be performed on HDSL2/SHDSL segment endpoints." to be performed on HDSL2/SHDSL segment endpoints."
::= { hdsl2ShdslMibObjects 8 } ::= { hdsl2ShdslMibObjects 8 }
hdsl2ShdslEndpointMaintEntry OBJECT-TYPE hdsl2ShdslEndpointMaintEntry OBJECT-TYPE
SYNTAX Hdsl2ShdslEndpointMaintEntry SYNTAX Hdsl2ShdslEndpointMaintEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
skipping to change at line 1720 skipping to change at line 1713
corresponds to a single segment endpoint, and is indexed by the corresponds to a single segment endpoint, and is indexed by the
ifIndex of the HDSL2/SHDSL line, the UnitId of the associated ifIndex of the HDSL2/SHDSL line, the UnitId of the associated
unit and the side of the unit." unit and the side of the unit."
INDEX { ifIndex, hdsl2ShdslInvIndex, hdsl2ShdslEndpointSide } INDEX { ifIndex, hdsl2ShdslInvIndex, hdsl2ShdslEndpointSide }
::= { hdsl2ShdslEndpointMaintTable 1 } ::= { hdsl2ShdslEndpointMaintTable 1 }
Hdsl2ShdslEndpointMaintEntry ::= Hdsl2ShdslEndpointMaintEntry ::=
SEQUENCE SEQUENCE
{ {
hdsl2ShdslMaintLoopbackConfig INTEGER, hdsl2ShdslMaintLoopbackConfig INTEGER,
Expires May 21, 2001 Page [31]
hdsl2ShdslMaintTipRingReversal INTEGER, hdsl2ShdslMaintTipRingReversal INTEGER,
hdsl2ShdslMaintPowerBackOff INTEGER, hdsl2ShdslMaintPowerBackOff INTEGER,
hdsl2ShdslMaintSoftRestart INTEGER hdsl2ShdslMaintSoftRestart INTEGER
} }
hdsl2ShdslMaintLoopbackConfig OBJECT-TYPE hdsl2ShdslMaintLoopbackConfig OBJECT-TYPE
SYNTAX INTEGER SYNTAX INTEGER
{ {
noLoopback(1), noLoopback(1),
normalLoopback(2), normalLoopback(2),
skipping to change at line 1752 skipping to change at line 1743
hdsl2ShdslMaintTipRingReversal OBJECT-TYPE hdsl2ShdslMaintTipRingReversal OBJECT-TYPE
SYNTAX INTEGER SYNTAX INTEGER
{ {
normal(1), normal(1),
reversed(2) reversed(2)
} }
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the state of the tip/ring pair at "This object indicates the state of the tip/ring pair at
Expires July 26, 2001 Page [32]
the associated segment endpoint." the associated segment endpoint."
::= { hdsl2ShdslEndpointMaintEntry 2 } ::= { hdsl2ShdslEndpointMaintEntry 2 }
hdsl2ShdslMaintPowerBackOff OBJECT-TYPE hdsl2ShdslMaintPowerBackOff OBJECT-TYPE
SYNTAX INTEGER SYNTAX INTEGER
{ {
default(1), default(1),
enhanced(2) enhanced(2)
} }
MAX-ACCESS read-write MAX-ACCESS read-write
skipping to change at line 1774 skipping to change at line 1767
"This object configures the receiver at the associated "This object configures the receiver at the associated
segment endpoint to operate in default or enhanced power segment endpoint to operate in default or enhanced power
backoff mode." backoff mode."
::= { hdsl2ShdslEndpointMaintEntry 3 } ::= { hdsl2ShdslEndpointMaintEntry 3 }
hdsl2ShdslMaintSoftRestart OBJECT-TYPE hdsl2ShdslMaintSoftRestart OBJECT-TYPE
SYNTAX INTEGER SYNTAX INTEGER
{ {
ready(1), ready(1),
restart(2) restart(2)
Expires May 21, 2001 Page [32]
} }
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object enables the manager to trigger a soft restart "This object enables the manager to trigger a soft restart
of the modem at the associated segment endpoint. The manager of the modem at the associated segment endpoint. The manager
may only set this object to the 'restart(2)' value to initiate may only set this object to the 'restart(2)' value to initiate
a restart. The agent will perform a restart after approximately a restart. The agent will perform a restart after approximately
5 seconds, and restore the object to the 'ready(1)' state." 5 seconds, and restore the object to the 'ready(1)' state."
::= { hdsl2ShdslEndpointMaintEntry 4 } ::= { hdsl2ShdslEndpointMaintEntry 4 }
skipping to change at line 1808 skipping to change at line 1799
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An entry in the hdsl2ShdslUnitMaintTable. Each entry "An entry in the hdsl2ShdslUnitMaintTable. Each entry
corresponds to a single unit, and is indexed by the corresponds to a single unit, and is indexed by the
ifIndex of the HDSL2/SHDSL line and the UnitId of the ifIndex of the HDSL2/SHDSL line and the UnitId of the
associated unit." associated unit."
INDEX { ifIndex, hdsl2ShdslInvIndex } INDEX { ifIndex, hdsl2ShdslInvIndex }
::= { hdsl2ShdslUnitMaintTable 1 } ::= { hdsl2ShdslUnitMaintTable 1 }
Expires July 26, 2001 Page [33]
Hdsl2ShdslUnitMaintEntry ::= Hdsl2ShdslUnitMaintEntry ::=
SEQUENCE SEQUENCE
{ {
hdsl2ShdslMaintLoopbackTimeout Integer32, hdsl2ShdslMaintLoopbackTimeout Integer32,
hdsl2ShdslMaintUnitPowerSource INTEGER hdsl2ShdslMaintUnitPowerSource INTEGER
} }
hdsl2ShdslMaintLoopbackTimeout OBJECT-TYPE hdsl2ShdslMaintLoopbackTimeout OBJECT-TYPE
SYNTAX Integer32 SYNTAX Integer32
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object configures the timeout value for loopbacks "This object configures the timeout value for loopbacks
initiated at segments endpoints contained in the associated initiated at segments endpoints contained in the associated
unit. A value of 0 disables the timeout." unit. A value of 0 disables the timeout."
::= { hdsl2ShdslUnitMaintEntry 1 } ::= { hdsl2ShdslUnitMaintEntry 1 }
hdsl2ShdslMaintUnitPowerSource OBJECT-TYPE hdsl2ShdslMaintUnitPowerSource OBJECT-TYPE
SYNTAX INTEGER SYNTAX INTEGER
{ {
Expires May 21, 2001 Page [33]
local(1), local(1),
span(2) span(2)
} }
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the DC power source being used by the "This object indicates the DC power source being used by the
associated unit." associated unit."
::= { hdsl2ShdslUnitMaintEntry 2 } ::= { hdsl2ShdslUnitMaintEntry 2 }
skipping to change at line 1863 skipping to change at line 1854
hdsl2ShdslSpanConfProfileEntry OBJECT-TYPE hdsl2ShdslSpanConfProfileEntry OBJECT-TYPE
SYNTAX Hdsl2ShdslSpanConfProfileEntry SYNTAX Hdsl2ShdslSpanConfProfileEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Each entry corresponds to a single span configuration "Each entry corresponds to a single span configuration
profile. Each profile contains a set of span configuration profile. Each profile contains a set of span configuration
parameters. The configuration parameters in a profile are parameters. The configuration parameters in a profile are
applied to those lines referencing that profile (see the applied to those lines referencing that profile (see the
hdsl2ShdslSpanConfProfile object). Profiles may be hdsl2ShdslSpanConfProfile object). Profiles may be
Expires July 26, 2001 Page [34]
created/deleted using the row creation/deletion mechanism created/deleted using the row creation/deletion mechanism
via hdsl2ShdslSpanConfProfileRowStatus. Profiles that are via hdsl2ShdslSpanConfProfileRowStatus. Profiles that are
being referenced may not be deleted." being referenced may not be deleted."
INDEX { IMPLIED hdsl2ShdslSpanConfProfileName } INDEX { IMPLIED hdsl2ShdslSpanConfProfileName }
::= { hdsl2ShdslSpanConfProfileTable 1 } ::= { hdsl2ShdslSpanConfProfileTable 1 }
Hdsl2ShdslSpanConfProfileEntry ::= Hdsl2ShdslSpanConfProfileEntry ::=
SEQUENCE SEQUENCE
{ {
hdsl2ShdslSpanConfProfileName SnmpAdminString, hdsl2ShdslSpanConfProfileName SnmpAdminString,
hdsl2ShdslSpanWireInterface INTEGER, hdsl2ShdslSpanConfWireInterface INTEGER,
hdsl2ShdslSpanMinLineRate Integer32, hdsl2ShdslSpanConfMinLineRate Integer32,
hdsl2ShdslSpanMaxLineRate Integer32, hdsl2ShdslSpanConfMaxLineRate Integer32,
hdsl2ShdslSpanConfPSD INTEGER, hdsl2ShdslSpanConfPSD INTEGER,
hdsl2ShdslSpanConfTransmissionMode Hdsl2ShdslTransmissionModeType, hdsl2ShdslSpanConfTransmissionMode Hdsl2ShdslTransmissionModeType,
hdsl2ShdslSpanRemoteEnabled INTEGER, hdsl2ShdslSpanConfRemoteEnabled INTEGER,
hdsl2ShdslSpanPowerFeeding INTEGER, hdsl2ShdslSpanConfPowerFeeding INTEGER,
hdsl2ShdslSpanConfCurrCondTargetMarginDown INTEGER,
hdsl2ShdslSpanConfWorstCaseTargetMarginDown INTEGER,
hdsl2ShdslSpanConfCurrCondTargetMarginUp INTEGER,
hdsl2ShdslSpanConfWorstCaseTargetMarginUp INTEGER,
hdsl2ShdslSpanConfUsedTargetMargins Integer32,
hdsl2ShdslSpanConfProfileRowStatus RowStatus hdsl2ShdslSpanConfProfileRowStatus RowStatus
} }
Expires May 21, 2001 Page [34]
hdsl2ShdslSpanConfProfileName OBJECT-TYPE hdsl2ShdslSpanConfProfileName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32)) SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object is the unique index associated with this profile." "This object is the unique index associated with this profile."
::= { hdsl2ShdslSpanConfProfileEntry 1 } ::= { hdsl2ShdslSpanConfProfileEntry 1 }
hdsl2ShdslSpanWireInterface OBJECT-TYPE hdsl2ShdslSpanConfWireInterface OBJECT-TYPE
SYNTAX INTEGER SYNTAX INTEGER
{ {
twoWire(1), twoWire(1),
fourWire(2) fourWire(2)
} }
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object configures the two-wire or optional four-wire "This object configures the two-wire or optional four-wire
operation for SHDSL Lines." operation for SHDSL Lines."
::= { hdsl2ShdslSpanConfProfileEntry 2 } ::= { hdsl2ShdslSpanConfProfileEntry 2 }
hdsl2ShdslSpanMinLineRate OBJECT-TYPE hdsl2ShdslSpanConfMinLineRate OBJECT-TYPE
SYNTAX Integer32 SYNTAX Integer32
UNITS "bps" UNITS "bps"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object configures the minimum transmission rate for "This object configures the minimum transmission rate for
the associated SHDSL Line in bits-per-second (bps). If the associated SHDSL Line in bits-per-second (bps). If
Expires July 26, 2001 Page [35]
the minimum line rate equals the maximum line rate the minimum line rate equals the maximum line rate
(hdsl2ShdslSpanMaxLineRate), the line rate is considered (hdsl2ShdslSpanMaxLineRate), the line rate is considered
'fixed'. If the minimum line rate is less than the maximum 'fixed'. If the minimum line rate is less than the maximum
line rate, the line rate is considered 'rate-adaptive'." line rate, the line rate is considered 'rate-adaptive'."
::= { hdsl2ShdslSpanConfProfileEntry 3 } ::= { hdsl2ShdslSpanConfProfileEntry 3 }
hdsl2ShdslSpanMaxLineRate OBJECT-TYPE hdsl2ShdslSpanConfMaxLineRate OBJECT-TYPE
SYNTAX Integer32 SYNTAX Integer32
UNITS "bps" UNITS "bps"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object configures the maximum transmission rate for "This object configures the maximum transmission rate for
the associated SHDSL Line in bits-per-second (bps). If the associated SHDSL Line in bits-per-second (bps). If
the minimum line rate equals the maximum line rate the minimum line rate equals the maximum line rate
(hdsl2ShdslSpanMaxLineRate), the line rate is considered (hdsl2ShdslSpanMaxLineRate), the line rate is considered
'fixed'. If the minimum line rate is less than the maximum 'fixed'. If the minimum line rate is less than the maximum
line rate, the line rate is considered 'rate-adaptive'." line rate, the line rate is considered 'rate-adaptive'."
::= { hdsl2ShdslSpanConfProfileEntry 4 } ::= { hdsl2ShdslSpanConfProfileEntry 4 }
hdsl2ShdslSpanConfPSD OBJECT-TYPE hdsl2ShdslSpanConfPSD OBJECT-TYPE
SYNTAX INTEGER SYNTAX INTEGER
{ {
Expires May 21, 2001 Page [35]
symmetric(1), symmetric(1),
asymmetric(2) asymmetric(2)
} }
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object configures use of symmetric/asymmetric PSD (Power "This object configures use of symmetric/asymmetric PSD (Power
Spectral Density) Mask for the associated SHDSL Line. Support Spectral Density) Mask for the associated SHDSL Line. Support
for symmetric PSD is mandatory for all supported data rates. for symmetric PSD is mandatory for all supported data rates.
Support for asymmetric PSD is optional." Support for asymmetric PSD is optional."
skipping to change at line 1960 skipping to change at line 1955
hdsl2ShdslSpanConfTransmissionMode OBJECT-TYPE hdsl2ShdslSpanConfTransmissionMode OBJECT-TYPE
SYNTAX Hdsl2ShdslTransmissionModeType SYNTAX Hdsl2ShdslTransmissionModeType
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object specifies the regional setting for the SHDSL "This object specifies the regional setting for the SHDSL
line." line."
::= { hdsl2ShdslSpanConfProfileEntry 6 } ::= { hdsl2ShdslSpanConfProfileEntry 6 }
hdsl2ShdslSpanRemoteEnabled OBJECT-TYPE hdsl2ShdslSpanConfRemoteEnabled OBJECT-TYPE
SYNTAX INTEGER SYNTAX INTEGER
{ {
enabled(1), enabled(1),
disabled(2) disabled(2)
} }
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
Expires July 26, 2001 Page [36]
"This object enables/disables support for remote management "This object enables/disables support for remote management
of the units in a SHDSL line from the STU-R via the EOC." of the units in a SHDSL line from the STU-R via the EOC."
::= { hdsl2ShdslSpanConfProfileEntry 7 } ::= { hdsl2ShdslSpanConfProfileEntry 7 }
hdsl2ShdslSpanPowerFeeding OBJECT-TYPE hdsl2ShdslSpanConfPowerFeeding OBJECT-TYPE
SYNTAX INTEGER SYNTAX INTEGER
{ {
noPower(1), noPower(1),
powerFeed(2), powerFeed(2),
wettingCurrent(3) wettingCurrent(3)
} }
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object enables/disables support for optional power "This object enables/disables support for optional power
feeding in a SHDSL line." feeding in a SHDSL line."
::= { hdsl2ShdslSpanConfProfileEntry 8 } ::= { hdsl2ShdslSpanConfProfileEntry 8 }
hdsl2ShdslSpanConfCurrCondTargetMarginDown OBJECT-TYPE
SYNTAX INTEGER(-10..21)
UNITS "dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the downstream current condition target SNR
margin for a SHDSL line."
::= { hdsl2ShdslSpanConfProfileEntry 9 }
hdsl2ShdslSpanConfWorstCaseTargetMarginDown OBJECT-TYPE
SYNTAX INTEGER(-10..21)
UNITS "dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the downstream worst case target SNR margin
for a SHDSL line."
::= { hdsl2ShdslSpanConfProfileEntry 10 }
hdsl2ShdslSpanConfCurrCondTargetMarginUp OBJECT-TYPE
SYNTAX INTEGER(-10..21)
UNITS "dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"This object specifies the upstream current condition target SNR
margin for a SHDSL line."
::= { hdsl2ShdslSpanConfProfileEntry 11 }
hdsl2ShdslSpanConfWorstCaseTargetMarginUp OBJECT-TYPE
SYNTAX INTEGER(-10..21)
UNITS "dB"
MAX-ACCESS read-create
STATUS current
Expires July 26, 2001 Page [37]
DESCRIPTION
"This object specifies the upstream worst case target SNR margin
for a SHDSL line."
::= { hdsl2ShdslSpanConfProfileEntry 12 }
hdsl2ShdslSpanConfUsedTargetMargins OBJECT-TYPE
SYNTAX Integer32
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Contains indicates whether a target SNR margin is enabled or disabled.
This is a bit-map of possible settings. The various bit positions are:
1 currCondDown current condition downstream target SNR margin enabled
2 worstCaseDown worst case downstream target SNR margin enabled
4 currCondUp current condition upstream target SNR margin enabled
8 worstCaseUp worst case upstream target SNR margin enabled."
::= { hdsl2ShdslSpanConfProfileEntry 13 }
hdsl2ShdslSpanConfProfileRowStatus OBJECT-TYPE hdsl2ShdslSpanConfProfileRowStatus OBJECT-TYPE
SYNTAX RowStatus SYNTAX RowStatus
MAX-ACCESS read-create MAX-ACCESS read-create
Expires May 21, 2001 Page [36]
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object controlls creation/deletion of the associated "This object controlls creation/deletion of the associated
entry in this table per the semantics of RowStatus." entry in this table per the semantics of RowStatus."
::= { hdsl2ShdslSpanConfProfileEntry 9 } ::= { hdsl2ShdslSpanConfProfileEntry 14 }
-- Segment Endpoint Alarm Configuration Profile group -- Segment Endpoint Alarm Configuration Profile group
-- --
hdsl2ShdslEndpointAlarmConfProfileTable OBJECT-TYPE hdsl2ShdslEndpointAlarmConfProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF Hdsl2ShdslEndpointAlarmConfProfileEntry SYNTAX SEQUENCE OF Hdsl2ShdslEndpointAlarmConfProfileEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table supports definitions of alarm configuration "This table supports definitions of alarm configuration
skipping to change at line 2020 skipping to change at line 2074
hdsl2ShdslEndpointAlarmConfProfileEntry OBJECT-TYPE hdsl2ShdslEndpointAlarmConfProfileEntry OBJECT-TYPE
SYNTAX Hdsl2ShdslEndpointAlarmConfProfileEntry SYNTAX Hdsl2ShdslEndpointAlarmConfProfileEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Each entry corresponds to a single alarm configuration "Each entry corresponds to a single alarm configuration
profile. Each profile contains a set of parameters for setting profile. Each profile contains a set of parameters for setting
alarm thresholds for various performance attributes monitored alarm thresholds for various performance attributes monitored
at HDSL2/SHDSL segment endpoints. Profiles may be at HDSL2/SHDSL segment endpoints. Profiles may be
created/deleted using the row creation/deletion mechanism via created/deleted using the row creation/deletion mechanism via
Expires July 26, 2001 Page [38]
hdsl2ShdslEndpointAlarmConfProfileRowStatus. Profiles that hdsl2ShdslEndpointAlarmConfProfileRowStatus. Profiles that
are being referenced may not be deleted." are being referenced may not be deleted."
INDEX { IMPLIED hdsl2ShdslEndpointAlarmConfProfileName } INDEX { IMPLIED hdsl2ShdslEndpointAlarmConfProfileName }
::= { hdsl2ShdslEndpointAlarmConfProfileTable 1 } ::= { hdsl2ShdslEndpointAlarmConfProfileTable 1 }
Hdsl2ShdslEndpointAlarmConfProfileEntry ::= Hdsl2ShdslEndpointAlarmConfProfileEntry ::=
SEQUENCE SEQUENCE
{ {
hdsl2ShdslEndpointAlarmConfProfileName SnmpAdminString, hdsl2ShdslEndpointAlarmConfProfileName SnmpAdminString,
hdsl2ShdslEndpointThreshLoopAttenuation Integer32, hdsl2ShdslEndpointThreshLoopAttenuation Integer32,
skipping to change at line 2044 skipping to change at line 2100
Hdsl2ShdslPerfIntervalThreshold, Hdsl2ShdslPerfIntervalThreshold,
hdsl2ShdslEndpointThreshCRCanomalies Integer32, hdsl2ShdslEndpointThreshCRCanomalies Integer32,
hdsl2ShdslEndpointThreshLOSWS hdsl2ShdslEndpointThreshLOSWS
Hdsl2ShdslPerfIntervalThreshold, Hdsl2ShdslPerfIntervalThreshold,
hdsl2ShdslEndpointThreshUAS hdsl2ShdslEndpointThreshUAS
Hdsl2ShdslPerfIntervalThreshold, Hdsl2ShdslPerfIntervalThreshold,
hdsl2ShdslEndpointAlarmConfProfileRowStatus RowStatus hdsl2ShdslEndpointAlarmConfProfileRowStatus RowStatus
} }
hdsl2ShdslEndpointAlarmConfProfileName OBJECT-TYPE hdsl2ShdslEndpointAlarmConfProfileName OBJECT-TYPE
Expires May 21, 2001 Page [37]
SYNTAX SnmpAdminString (SIZE(1..32)) SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object is the unique index associated with this profile." "This object is the unique index associated with this profile."
::= { hdsl2ShdslEndpointAlarmConfProfileEntry 1 } ::= { hdsl2ShdslEndpointAlarmConfProfileEntry 1 }
hdsl2ShdslEndpointThreshLoopAttenuation OBJECT-TYPE hdsl2ShdslEndpointThreshLoopAttenuation OBJECT-TYPE
SYNTAX Integer32 SYNTAX Integer32
UNITS "dB" UNITS "dB"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object configures the loop attentuation alarm threshold. "This object configures the loop attentuation alarm threshold.
When the current value reaches/exceeds this threshold, a When the current value reaches or drops below this threshold,
hdsl2ShdslLoopAttenCrossingTrap will be generated." a hdsl2ShdslLoopAttenCrossingTrap will be generated."
::= { hdsl2ShdslEndpointAlarmConfProfileEntry 2 } ::= { hdsl2ShdslEndpointAlarmConfProfileEntry 2 }
hdsl2ShdslEndpointThreshSNRMargin OBJECT-TYPE hdsl2ShdslEndpointThreshSNRMargin OBJECT-TYPE
SYNTAX Integer32 SYNTAX Integer32
UNITS "dB" UNITS "dB"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object configures the SNR margin alarm threshold. "This object configures the SNR margin alarm threshold.
When the current value reaches/exceeds this threshold, a When the current value reaches or drops below this threshold,
hdsl2ShdslSNRMarginCrossingTrap will be generated." a hdsl2ShdslSNRMarginCrossingTrap will be generated."
::= { hdsl2ShdslEndpointAlarmConfProfileEntry 3 } ::= { hdsl2ShdslEndpointAlarmConfProfileEntry 3 }
Expires July 26, 2001 Page [39]
hdsl2ShdslEndpointThreshES OBJECT-TYPE hdsl2ShdslEndpointThreshES OBJECT-TYPE
SYNTAX Hdsl2ShdslPerfIntervalThreshold SYNTAX Hdsl2ShdslPerfIntervalThreshold
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object configures the threshold for the number of "This object configures the threshold for the number of
errored seconds (ES) within any given 15-minute performance errored seconds (ES) within any given 15-minute performance
data collection interval. If the value of errored seconds data collection interval. If the value of errored seconds
in a particular 15-minute collection interval reaches/ in a particular 15-minute collection interval reaches/
skipping to change at line 2098 skipping to change at line 2154
::= { hdsl2ShdslEndpointAlarmConfProfileEntry 4 } ::= { hdsl2ShdslEndpointAlarmConfProfileEntry 4 }
hdsl2ShdslEndpointThreshSES OBJECT-TYPE hdsl2ShdslEndpointThreshSES OBJECT-TYPE
SYNTAX Hdsl2ShdslPerfIntervalThreshold SYNTAX Hdsl2ShdslPerfIntervalThreshold
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object configures the threshold for the number of "This object configures the threshold for the number of
severely errored seconds (SES) within any given 15-minute severely errored seconds (SES) within any given 15-minute
Expires May 21, 2001 Page [38]
performance data collection interval. If the value of severely performance data collection interval. If the value of severely
errored seconds in a particular 15-minute collection interval errored seconds in a particular 15-minute collection interval
reaches/exceeds this value, a hdsl2ShdslPerfSESThreshTrap will reaches/exceeds this value, a hdsl2ShdslPerfSESThreshTrap will
be generated. One trap will be sent per interval per endpoint." be generated. One trap will be sent per interval per endpoint."
::= { hdsl2ShdslEndpointAlarmConfProfileEntry 5 } ::= { hdsl2ShdslEndpointAlarmConfProfileEntry 5 }
hdsl2ShdslEndpointThreshCRCanomalies OBJECT-TYPE hdsl2ShdslEndpointThreshCRCanomalies OBJECT-TYPE
SYNTAX Integer32 SYNTAX Integer32
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
skipping to change at line 2126 skipping to change at line 2180
generated. One trap will be sent per interval per endpoint." generated. One trap will be sent per interval per endpoint."
::= { hdsl2ShdslEndpointAlarmConfProfileEntry 6 } ::= { hdsl2ShdslEndpointAlarmConfProfileEntry 6 }
hdsl2ShdslEndpointThreshLOSWS OBJECT-TYPE hdsl2ShdslEndpointThreshLOSWS OBJECT-TYPE
SYNTAX Hdsl2ShdslPerfIntervalThreshold SYNTAX Hdsl2ShdslPerfIntervalThreshold
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object configures the threshold for the number of "This object configures the threshold for the number of
loss of sync word seconds (LOSWS) within any given 15-minute Loss of Sync Word (LOSW) Seconds within any given 15-minute
performance data collection interval. If the value of LOSWS performance data collection interval. If the value of LOSW
in a particular 15-minute collection interval reaches/exceeds in a particular 15-minute collection interval reaches/exceeds
this value, a hdsl2ShdslPerfLOSWSThreshTrap will be generated. this value, a hdsl2ShdslPerfLOSWSThreshTrap will be generated.
Expires July 26, 2001 Page [40]
One trap will be sent per interval per endpoint." One trap will be sent per interval per endpoint."
::= { hdsl2ShdslEndpointAlarmConfProfileEntry 7 } ::= { hdsl2ShdslEndpointAlarmConfProfileEntry 7 }
hdsl2ShdslEndpointThreshUAS OBJECT-TYPE hdsl2ShdslEndpointThreshUAS OBJECT-TYPE
SYNTAX Hdsl2ShdslPerfIntervalThreshold SYNTAX Hdsl2ShdslPerfIntervalThreshold
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object configures the threshold for the number of "This object configures the threshold for the number of
skipping to change at line 2152 skipping to change at line 2208
in a particular 15-minute collection interval reaches/exceeds in a particular 15-minute collection interval reaches/exceeds
this value, a hdsl2ShdslPerfUASThreshTrap will be generated. this value, a hdsl2ShdslPerfUASThreshTrap will be generated.
One trap will be sent per interval per endpoint." One trap will be sent per interval per endpoint."
::= { hdsl2ShdslEndpointAlarmConfProfileEntry 8 } ::= { hdsl2ShdslEndpointAlarmConfProfileEntry 8 }
hdsl2ShdslEndpointAlarmConfProfileRowStatus OBJECT-TYPE hdsl2ShdslEndpointAlarmConfProfileRowStatus OBJECT-TYPE
SYNTAX RowStatus SYNTAX RowStatus
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
Expires May 21, 2001 Page [39]
"This object controls creation/deletion of the associated "This object controls creation/deletion of the associated
entry in this table as per the semantics of RowStatus." entry in this table as per the semantics of RowStatus."
::= { hdsl2ShdslEndpointAlarmConfProfileEntry 9 } ::= { hdsl2ShdslEndpointAlarmConfProfileEntry 9 }
-- Notifications Group -- Notifications Group
-- --
hdsl2ShdslTraps OBJECT IDENTIFIER ::= { hdsl2ShdslLineMib 2 } hdsl2ShdslTraps OBJECT IDENTIFIER ::= { hdsl2ShdslLineMib 2 }
hdsl2ShdslTrapsPrefix OBJECT IDENTIFIER ::= { hdsl2ShdslTraps 0 } hdsl2ShdslTrapsPrefix OBJECT IDENTIFIER ::= { hdsl2ShdslTraps 0 }
skipping to change at line 2185 skipping to change at line 2239
DESCRIPTION DESCRIPTION
"This trap indicates that the loop attenuation threshold (as "This trap indicates that the loop attenuation threshold (as
per the hdsl2ShdslEndpointThreshLoopAttenuation value) has been per the hdsl2ShdslEndpointThreshLoopAttenuation value) has been
reached/exceeded for the HDSL2/SHDSL segment endpoint identified reached/exceeded for the HDSL2/SHDSL segment endpoint identified
by the ifIndex, hdsl2ShdslInvIndex, hdsl2ShdslEndpointSide, and by the ifIndex, hdsl2ShdslInvIndex, hdsl2ShdslEndpointSide, and
hdsl2ShdslEndpointWirePair values." hdsl2ShdslEndpointWirePair values."
::= { hdsl2ShdslTrapsPrefix 1 } ::= { hdsl2ShdslTrapsPrefix 1 }
hdsl2ShdslSNRMarginCrossingTrap NOTIFICATION-TYPE hdsl2ShdslSNRMarginCrossingTrap NOTIFICATION-TYPE
OBJECTS OBJECTS
Expires July 26, 2001 Page [41]
{ {
ifIndex, ifIndex,
hdsl2ShdslInvIndex, hdsl2ShdslInvIndex,
hdsl2ShdslEndpointSide, hdsl2ShdslEndpointSide,
hdsl2ShdslEndpointWirePair, hdsl2ShdslEndpointWirePair,
hdsl2ShdslEndpointCurrSnrMgn, hdsl2ShdslEndpointCurrSnrMgn,
hdsl2ShdslEndpointThreshSNRMargin hdsl2ShdslEndpointThreshSNRMargin
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
skipping to change at line 2206 skipping to change at line 2262
hdsl2ShdslEndpointThreshSNRMargin value) has been hdsl2ShdslEndpointThreshSNRMargin value) has been
reached/exceeded for the HDSL2/SHDSL segment endpoint identified reached/exceeded for the HDSL2/SHDSL segment endpoint identified
by the ifIndex, hdsl2ShdslInvIndex, hdsl2ShdslEndpointSide, and by the ifIndex, hdsl2ShdslInvIndex, hdsl2ShdslEndpointSide, and
hdsl2ShdslEndpointWirePair values." hdsl2ShdslEndpointWirePair values."
::= { hdsl2ShdslTrapsPrefix 2 } ::= { hdsl2ShdslTrapsPrefix 2 }
hdsl2ShdslPerfESThreshTrap NOTIFICATION-TYPE hdsl2ShdslPerfESThreshTrap NOTIFICATION-TYPE
OBJECTS OBJECTS
{ {
ifIndex, ifIndex,
Expires May 21, 2001 Page [40]
hdsl2ShdslInvIndex, hdsl2ShdslInvIndex,
hdsl2ShdslEndpointSide, hdsl2ShdslEndpointSide,
hdsl2ShdslEndpointWirePair, hdsl2ShdslEndpointWirePair,
hdsl2ShdslEndpointCurr15MinES, hdsl2ShdslEndpointCurr15MinES,
hdsl2ShdslEndpointThreshES hdsl2ShdslEndpointThreshES
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This trap indicates that the errored seconds threshold (as "This trap indicates that the errored seconds threshold (as
per the hdsl2ShdslEndpointThreshES value) has been reached/ per the hdsl2ShdslEndpointThreshES value) has been reached/
skipping to change at line 2240 skipping to change at line 2294
hdsl2ShdslEndpointCurr15MinSES, hdsl2ShdslEndpointCurr15MinSES,
hdsl2ShdslEndpointThreshSES hdsl2ShdslEndpointThreshSES
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This trap indicates that the severely errored seconds threshold "This trap indicates that the severely errored seconds threshold
(as per the hdsl2ShdslEndpointThreshSES value) has been reached/ (as per the hdsl2ShdslEndpointThreshSES value) has been reached/
exceeded for the HDSL2/SHDSL Segment Endpoint identified by the exceeded for the HDSL2/SHDSL Segment Endpoint identified by the
ifIndex, hdsl2ShdslInvIndex, hdsl2ShdslEndpointSide, and ifIndex, hdsl2ShdslInvIndex, hdsl2ShdslEndpointSide, and
hdsl2ShdslEndpointWirePair values." hdsl2ShdslEndpointWirePair values."
Expires July 26, 2001 Page [42]
::= { hdsl2ShdslTrapsPrefix 4 } ::= { hdsl2ShdslTrapsPrefix 4 }
hdsl2ShdslPerfCRCanomaliesThreshTrap NOTIFICATION-TYPE hdsl2ShdslPerfCRCanomaliesThreshTrap NOTIFICATION-TYPE
OBJECTS OBJECTS
{ {
ifIndex, ifIndex,
hdsl2ShdslInvIndex, hdsl2ShdslInvIndex,
hdsl2ShdslEndpointSide, hdsl2ShdslEndpointSide,
hdsl2ShdslEndpointWirePair, hdsl2ShdslEndpointWirePair,
hdsl2ShdslEndpointCurr15MinCRCanomalies, hdsl2ShdslEndpointCurr15MinCRCanomalies,
skipping to change at line 2261 skipping to change at line 2317
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This trap indicates that the CRC anomalies threshold (as "This trap indicates that the CRC anomalies threshold (as
per the hdsl2ShdslEndpointThreshCRCanomalies value) has been per the hdsl2ShdslEndpointThreshCRCanomalies value) has been
reached/exceeded for the HDSL2/SHDSL Segment Endpoint identified reached/exceeded for the HDSL2/SHDSL Segment Endpoint identified
by the ifIndex, hdsl2ShdslInvIndex, hdsl2ShdslEndpointSide, and by the ifIndex, hdsl2ShdslInvIndex, hdsl2ShdslEndpointSide, and
hdsl2ShdslEndpointWirePair values." hdsl2ShdslEndpointWirePair values."
::= { hdsl2ShdslTrapsPrefix 5 } ::= { hdsl2ShdslTrapsPrefix 5 }
Expires May 21, 2001 Page [41]
hdsl2ShdslPerfLOSWSThreshTrap NOTIFICATION-TYPE hdsl2ShdslPerfLOSWSThreshTrap NOTIFICATION-TYPE
OBJECTS OBJECTS
{ {
ifIndex, ifIndex,
hdsl2ShdslInvIndex, hdsl2ShdslInvIndex,
hdsl2ShdslEndpointSide, hdsl2ShdslEndpointSide,
hdsl2ShdslEndpointWirePair, hdsl2ShdslEndpointWirePair,
hdsl2ShdslEndpointCurr15MinLOSWS, hdsl2ShdslEndpointCurr15MinLOSWS,
hdsl2ShdslEndpointThreshLOSWS hdsl2ShdslEndpointThreshLOSWS
} }
skipping to change at line 2295 skipping to change at line 2349
ifIndex, ifIndex,
hdsl2ShdslInvIndex, hdsl2ShdslInvIndex,
hdsl2ShdslEndpointSide, hdsl2ShdslEndpointSide,
hdsl2ShdslEndpointWirePair, hdsl2ShdslEndpointWirePair,
hdsl2ShdslEndpointCurr15MinUAS, hdsl2ShdslEndpointCurr15MinUAS,
hdsl2ShdslEndpointThreshUAS hdsl2ShdslEndpointThreshUAS
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This trap indicates that the unavailable seconds threshold (as "This trap indicates that the unavailable seconds threshold (as
Expires July 26, 2001 Page [42]
per the hdsl2ShdslEndpointThreshUAS value) has been reached/ per the hdsl2ShdslEndpointThreshUAS value) has been reached/
exceeded for the HDSL2/SHDSL segment endpoint identified by the exceeded for the HDSL2/SHDSL segment endpoint identified by the
ifIndex, hdsl2ShdslInvIndex, hdsl2ShdslEndpointSide, and ifIndex, hdsl2ShdslInvIndex, hdsl2ShdslEndpointSide, and
hdsl2ShdslEndpointWirePair values." hdsl2ShdslEndpointWirePair values."
::= { hdsl2ShdslTrapsPrefix 7 } ::= { hdsl2ShdslTrapsPrefix 7 }
hdsl2ShdslSpanInvalidNumRepeaters NOTIFICATION-TYPE hdsl2ShdslSpanInvalidNumRepeaters NOTIFICATION-TYPE
OBJECTS OBJECTS
{ {
ifIndex, ifIndex,
hdsl2ShdslConfNumRepeaters hdsl2ShdslSpanConfNumRepeaters
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This trap indicates that a mismatch has been detected between "This trap indicates that a mismatch has been detected between
the number of repeater/regenerator units configured for a the number of repeater/regenerator units configured for a
HDSL2/SHDSL line via the hdsl2ShdslConfNumRepeaters object and HDSL2/SHDSL line via the hdsl2ShdslSpanConfNumRepeaters object
the actual number of repeater/regenerator units discovered via and the actual number of repeater/regenerator units discovered
the EOC." via the EOC."
::= { hdsl2ShdslTrapsPrefix 8 } ::= { hdsl2ShdslTrapsPrefix 8 }
Expires May 21, 2001 Page [42]
hdsl2ShdslLoopbackFailure NOTIFICATION-TYPE hdsl2ShdslLoopbackFailure NOTIFICATION-TYPE
OBJECTS OBJECTS
{ {
ifIndex, ifIndex,
hdsl2ShdslInvIndex, hdsl2ShdslInvIndex,
hdsl2ShdslEndpointSide, hdsl2ShdslEndpointSide,
hdsl2ShdslMaintLoopbackConfig hdsl2ShdslMaintLoopbackConfig
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This trap indicates that an endpoint maintenance loopback "This trap indicates that an endpoint maintenance loopback
command failed for an HDSL2/SHDSL segment." command failed for an HDSL2/SHDSL segment."
::= { hdsl2ShdslTrapsPrefix 9 } ::= { hdsl2ShdslTrapsPrefix 9 }
hdsl2ShdslpowerBackoff NOTIFICATION-TYPE
OBJECTS
{
ifIndex,
hdsl2ShdslInvIndex,
hdsl2ShdslEndpointSide,
hdsl2ShdslEndpointWirePair
}
STATUS current
DESCRIPTION
"This trap indicates that the bit setting for powerBackoff
in the hdsl2ShdslEndpointCurrStatus object for this endpoint
has changed."
::= { hdsl2ShdslTrapsPrefix 10 }
hdsl2ShdsldeviceFault NOTIFICATION-TYPE
OBJECTS
{
Expires July 26, 2001 Page [43]
ifIndex,
hdsl2ShdslInvIndex,
hdsl2ShdslEndpointSide,
hdsl2ShdslEndpointWirePair
}
STATUS current
DESCRIPTION
"This trap indicates that the bit setting for deviceFault
in the hdsl2ShdslEndpointCurrStatus object for this endpoint
has changed."
::= { hdsl2ShdslTrapsPrefix 11 }
hdsl2ShdsldcContinuityFault NOTIFICATION-TYPE
OBJECTS
{
ifIndex,
hdsl2ShdslInvIndex,
hdsl2ShdslEndpointSide,
hdsl2ShdslEndpointWirePair
}
STATUS current
DESCRIPTION
"This trap indicates that the bit setting for dcContinuityFault
in the hdsl2ShdslEndpointCurrStatus object for this endpoint
has changed."
::= { hdsl2ShdslTrapsPrefix 12 }
hdsl2ShdslconfigInitFailure NOTIFICATION-TYPE
OBJECTS
{
ifIndex,
hdsl2ShdslInvIndex,
hdsl2ShdslEndpointSide,
hdsl2ShdslEndpointWirePair
}
STATUS current
DESCRIPTION
"This trap indicates that the bit setting for configInitFailure
in the hdsl2ShdslEndpointCurrStatus object for this endpoint
has changed."
::= { hdsl2ShdslTrapsPrefix 13 }
hdsl2ShdslprotocolInitFailure NOTIFICATION-TYPE
OBJECTS
{
ifIndex,
hdsl2ShdslInvIndex,
hdsl2ShdslEndpointSide,
hdsl2ShdslEndpointWirePair
}
STATUS current
DESCRIPTION
"This trap indicates that the bit setting for
Expires July 26, 2001 Page [44]
protocolInitFailure in the hdsl2ShdslEndpointCurrStatus object
for this endpoint has changed."
::= { hdsl2ShdslTrapsPrefix 14 }
hdsl2ShdslnoNeighborPresent NOTIFICATION-TYPE
OBJECTS
{
ifIndex,
hdsl2ShdslInvIndex,
hdsl2ShdslEndpointSide,
hdsl2ShdslEndpointWirePair
}
STATUS current
DESCRIPTION
"This trap indicates that the bit setting for noNeighborPresent
in the hdsl2ShdslEndpointCurrStatus object for this endpoint
has changed."
::= { hdsl2ShdslTrapsPrefix 15 }
hdsl2ShdsllocalPowerLoss NOTIFICATION-TYPE
OBJECTS
{
ifIndex,
hdsl2ShdslInvIndex
}
STATUS current
DESCRIPTION
"This trap indicates impending unit failure due to loss of
local power (last gasp)."
::= { hdsl2ShdslTrapsPrefix 16 }
-- conformance information -- conformance information
-- --
hdsl2ShdslConformance OBJECT IDENTIFIER ::= { hdsl2ShdslLineMib 3 } hdsl2ShdslConformance OBJECT IDENTIFIER ::= { hdsl2ShdslLineMib 3 }
hdsl2ShdslGroups OBJECT IDENTIFIER ::= { hdsl2ShdslConformance 1 } hdsl2ShdslGroups OBJECT IDENTIFIER ::= { hdsl2ShdslConformance 1 }
hdsl2ShdslCompliances OBJECT IDENTIFIER ::= { hdsl2ShdslConformance 2 } hdsl2ShdslCompliances OBJECT IDENTIFIER ::= { hdsl2ShdslConformance 2 }
-- agent compliance statements -- agent compliance statements
hdsl2ShdslLineMibCompliance MODULE-COMPLIANCE hdsl2ShdslLineMibCompliance MODULE-COMPLIANCE
skipping to change at line 2354 skipping to change at line 2514
"The section outlines compliance requirements for this MIB." "The section outlines compliance requirements for this MIB."
MODULE MODULE
MANDATORY-GROUPS MANDATORY-GROUPS
{ {
hdsl2ShdslSpanConfGroup, hdsl2ShdslSpanConfGroup,
hdsl2ShdslSpanStatusGroup, hdsl2ShdslSpanStatusGroup,
hdsl2ShdslInventoryGroup, hdsl2ShdslInventoryGroup,
hdsl2ShdslEndpointConfGroup, hdsl2ShdslEndpointConfGroup,
hdsl2ShdslEndpointCurrGroup, hdsl2ShdslEndpointCurrGroup,
hdsl2Shdsl15MinIntervalGroup, hdsl2Shdsl15MinIntervalGroup,
Expires July 26, 2001 Page [45]
hdsl2Shdsl1DayIntervalGroup, hdsl2Shdsl1DayIntervalGroup,
hdsl2ShdslMaintenanceGroup, hdsl2ShdslMaintenanceGroup,
hdsl2ShdslEndpointAlarmConfGroup, hdsl2ShdslEndpointAlarmConfGroup,
hdsl2ShdslNotificationGroup hdsl2ShdslNotificationGroup
} }
GROUP hdsl2ShdslInventoryShdslGroup GROUP hdsl2ShdslInventoryShdslGroup
DESCRIPTION DESCRIPTION
"Support for this group is only required for implementations "Support for this group is only required for implementations
supporting SHDSL lines." supporting SHDSL lines."
GROUP hdsl2ShdslSpanShdslStatusGroup GROUP hdsl2ShdslSpanShdslStatusGroup
DESCRIPTION DESCRIPTION
"Support for this group is only required for implementations "Support for this group is only required for implementations
supporting SHDSL lines." supporting SHDSL lines."
Expires May 21, 2001 Page [43]
GROUP hdsl2ShdslSpanConfProfileGroup GROUP hdsl2ShdslSpanConfProfileGroup
DESCRIPTION DESCRIPTION
"Support for this group is only required for implementations "Support for this group is only required for implementations
supporting SHDSL lines." supporting SHDSL lines."
::= { hdsl2ShdslCompliances 1 } ::= { hdsl2ShdslCompliances 1 }
-- units of conformance -- units of conformance
-- --
hdsl2ShdslSpanConfGroup OBJECT-GROUP hdsl2ShdslSpanConfGroup OBJECT-GROUP
OBJECTS OBJECTS
{ {
hdsl2ShdslConfNumRepeaters, hdsl2ShdslSpanConfNumRepeaters,
hdsl2ShdslSpanConfProfile, hdsl2ShdslSpanConfProfile,
hdsl2ShdslSpanAlarmConfProfile hdsl2ShdslSpanConfAlarmProfile
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This group supports objects for configuring span related "This group supports objects for configuring span related
parameters for HDSL2/SHDSL lines." parameters for HDSL2/SHDSL lines."
::= { hdsl2ShdslGroups 1 } ::= { hdsl2ShdslGroups 1 }
hdsl2ShdslSpanStatusGroup OBJECT-GROUP hdsl2ShdslSpanStatusGroup OBJECT-GROUP
OBJECTS OBJECTS
{ {
skipping to change at line 2409 skipping to change at line 2569
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This group supports objects for retrieving span related "This group supports objects for retrieving span related
status for HDSL2/SHDSL lines." status for HDSL2/SHDSL lines."
::= { hdsl2ShdslGroups 2 } ::= { hdsl2ShdslGroups 2 }
hdsl2ShdslInventoryShdslGroup OBJECT-GROUP hdsl2ShdslInventoryShdslGroup OBJECT-GROUP
OBJECTS OBJECTS
{ {
Expires July 26, 2001 Page [46]
hdsl2ShdslInvTransmissionModeCapability hdsl2ShdslInvTransmissionModeCapability
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This group supports objects for retrieving SHDSL-specific "This group supports objects for retrieving SHDSL-specific
inventory information." inventory information."
::= { hdsl2ShdslGroups 3 } ::= { hdsl2ShdslGroups 3 }
hdsl2ShdslSpanShdslStatusGroup OBJECT-GROUP hdsl2ShdslSpanShdslStatusGroup OBJECT-GROUP
OBJECTS OBJECTS
{ {
hdsl2ShdslStatusMaxAttainableLineRate, hdsl2ShdslStatusMaxAttainableLineRate,
hdsl2ShdslStatusActualLineRate, hdsl2ShdslStatusActualLineRate,
hdsl2ShdslStatusTransmissionModeCurrent hdsl2ShdslStatusTransmissionModeCurrent
} }
Expires May 21, 2001 Page [44]
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This group supports objects for retrieving SHDSL-specific "This group supports objects for retrieving SHDSL-specific
span related status." span related status."
::= { hdsl2ShdslGroups 4 } ::= { hdsl2ShdslGroups 4 }
hdsl2ShdslInventoryGroup OBJECT-GROUP hdsl2ShdslInventoryGroup OBJECT-GROUP
OBJECTS OBJECTS
{ {
hdsl2ShdslInvIndex, hdsl2ShdslInvIndex,
skipping to change at line 2464 skipping to change at line 2624
OBJECTS OBJECTS
{ {
hdsl2ShdslEndpointSide, hdsl2ShdslEndpointSide,
hdsl2ShdslEndpointWirePair, hdsl2ShdslEndpointWirePair,
hdsl2ShdslEndpointAlarmConfProfile hdsl2ShdslEndpointAlarmConfProfile
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This group supports objects for configuring parameters for "This group supports objects for configuring parameters for
segment endpoints in HDSL2/SHDSL lines." segment endpoints in HDSL2/SHDSL lines."
Expires July 26, 2001 Page [47]
::= { hdsl2ShdslGroups 6 } ::= { hdsl2ShdslGroups 6 }
hdsl2ShdslEndpointCurrGroup OBJECT-GROUP hdsl2ShdslEndpointCurrGroup OBJECT-GROUP
OBJECTS OBJECTS
{ {
hdsl2ShdslEndpointSide, hdsl2ShdslEndpointSide,
hdsl2ShdslEndpointWirePair, hdsl2ShdslEndpointWirePair,
hdsl2ShdslEndpointCurrAtn, hdsl2ShdslEndpointCurrAtn,
hdsl2ShdslEndpointCurrSnrMgn, hdsl2ShdslEndpointCurrSnrMgn,
hdsl2ShdslEndpointCurrStatus, hdsl2ShdslEndpointCurrStatus,
hdsl2ShdslEndpointES, hdsl2ShdslEndpointES,
hdsl2ShdslEndpointSES, hdsl2ShdslEndpointSES,
hdsl2ShdslEndpointCRCanomalies, hdsl2ShdslEndpointCRCanomalies,
hdsl2ShdslEndpointLOSWS, hdsl2ShdslEndpointLOSWS,
Expires May 21, 2001 Page [45]
hdsl2ShdslEndpointUAS, hdsl2ShdslEndpointUAS,
hdsl2ShdslEndpointCurr15MinTimeElapsed, hdsl2ShdslEndpointCurr15MinTimeElapsed,
hdsl2ShdslEndpointCurr15MinES, hdsl2ShdslEndpointCurr15MinES,
hdsl2ShdslEndpointCurr15MinSES, hdsl2ShdslEndpointCurr15MinSES,
hdsl2ShdslEndpointCurr15MinCRCanomalies, hdsl2ShdslEndpointCurr15MinCRCanomalies,
hdsl2ShdslEndpointCurr15MinLOSWS, hdsl2ShdslEndpointCurr15MinLOSWS,
hdsl2ShdslEndpointCurr15MinUAS, hdsl2ShdslEndpointCurr15MinUAS,
hdsl2ShdslEndpointCurr1DayTimeElapsed, hdsl2ShdslEndpointCurr1DayTimeElapsed,
hdsl2ShdslEndpointCurr1DayES, hdsl2ShdslEndpointCurr1DayES,
hdsl2ShdslEndpointCurr1DaySES, hdsl2ShdslEndpointCurr1DaySES,
skipping to change at line 2519 skipping to change at line 2679
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This group supports objects which maintain historic performance "This group supports objects which maintain historic performance
measurements relating to segment endpoints in HDSL2/SHDSL lines measurements relating to segment endpoints in HDSL2/SHDSL lines
in 15-minute intervals." in 15-minute intervals."
::= { hdsl2ShdslGroups 8 } ::= { hdsl2ShdslGroups 8 }
hdsl2Shdsl1DayIntervalGroup OBJECT-GROUP hdsl2Shdsl1DayIntervalGroup OBJECT-GROUP
OBJECTS OBJECTS
Expires July 26, 2001 Page [48]
{ {
hdsl2Shdsl1DayIntervalMoniSecs, hdsl2Shdsl1DayIntervalMoniSecs,
hdsl2Shdsl1DayIntervalES, hdsl2Shdsl1DayIntervalES,
hdsl2Shdsl1DayIntervalSES, hdsl2Shdsl1DayIntervalSES,
hdsl2Shdsl1DayIntervalCRCanomalies, hdsl2Shdsl1DayIntervalCRCanomalies,
hdsl2Shdsl1DayIntervalLOSWS, hdsl2Shdsl1DayIntervalLOSWS,
hdsl2Shdsl1DayIntervalUAS hdsl2Shdsl1DayIntervalUAS
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This group supports objects which maintain historic performance "This group supports objects which maintain historic performance
measurements relating to segment endpoints in HDSL2/SHDSL lines measurements relating to segment endpoints in HDSL2/SHDSL lines
in 1-day intervals." in 1-day intervals."
::= { hdsl2ShdslGroups 9 } ::= { hdsl2ShdslGroups 9 }
Expires May 21, 2001 Page [46]
hdsl2ShdslMaintenanceGroup OBJECT-GROUP hdsl2ShdslMaintenanceGroup OBJECT-GROUP
OBJECTS OBJECTS
{ {
hdsl2ShdslMaintLoopbackConfig, hdsl2ShdslMaintLoopbackConfig,
hdsl2ShdslMaintTipRingReversal, hdsl2ShdslMaintTipRingReversal,
hdsl2ShdslMaintPowerBackOff, hdsl2ShdslMaintPowerBackOff,
hdsl2ShdslMaintSoftRestart, hdsl2ShdslMaintSoftRestart,
hdsl2ShdslMaintLoopbackTimeout, hdsl2ShdslMaintLoopbackTimeout,
hdsl2ShdslMaintUnitPowerSource hdsl2ShdslMaintUnitPowerSource
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This group supports objects that provide support for "This group supports objects that provide support for
maintenance actions for HDSL2/SHDSL lines." maintenance actions for HDSL2/SHDSL lines."
::= { hdsl2ShdslGroups 10 } ::= { hdsl2ShdslGroups 10 }
hdsl2ShdslEndpointAlarmConfGroup OBJECT-GROUP hdsl2ShdslEndpointAlarmConfGroup OBJECT-GROUP
OBJECTS OBJECTS
{ {
hdsl2ShdslEndpointThreshLoopAttenuation, hdsl2ShdslEndpointThreshLoopAttenuation,
hdsl2ShdslSpanWireInterface,
hdsl2ShdslEndpointThreshSNRMargin, hdsl2ShdslEndpointThreshSNRMargin,
hdsl2ShdslEndpointThreshES, hdsl2ShdslEndpointThreshES,
hdsl2ShdslEndpointThreshSES, hdsl2ShdslEndpointThreshSES,
hdsl2ShdslEndpointThreshCRCanomalies, hdsl2ShdslEndpointThreshCRCanomalies,
hdsl2ShdslEndpointThreshLOSWS, hdsl2ShdslEndpointThreshLOSWS,
hdsl2ShdslEndpointThreshUAS, hdsl2ShdslEndpointThreshUAS,
hdsl2ShdslEndpointAlarmConfProfileRowStatus hdsl2ShdslEndpointAlarmConfProfileRowStatus
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This group supports objects that allow configuration of alarm "This group supports objects that allow configuration of alarm
thresholds for various performance parameters for HDSL2/SHDSL thresholds for various performance parameters for HDSL2/SHDSL
lines." lines."
::= { hdsl2ShdslGroups 11 } ::= { hdsl2ShdslGroups 11 }
hdsl2ShdslNotificationGroup NOTIFICATION-GROUP hdsl2ShdslNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS NOTIFICATIONS
{ {
Expires July 26, 2001 Page [49]
hdsl2ShdslLoopAttenCrossingTrap, hdsl2ShdslLoopAttenCrossingTrap,
hdsl2ShdslSNRMarginCrossingTrap, hdsl2ShdslSNRMarginCrossingTrap,
hdsl2ShdslPerfESThreshTrap, hdsl2ShdslPerfESThreshTrap,
hdsl2ShdslPerfSESThreshTrap, hdsl2ShdslPerfSESThreshTrap,
hdsl2ShdslPerfCRCanomaliesThreshTrap, hdsl2ShdslPerfCRCanomaliesThreshTrap,
hdsl2ShdslPerfLOSWSThreshTrap, hdsl2ShdslPerfLOSWSThreshTrap,
hdsl2ShdslPerfUASThreshTrap, hdsl2ShdslPerfUASThreshTrap,
hdsl2ShdslSpanInvalidNumRepeaters, hdsl2ShdslSpanInvalidNumRepeaters,
hdsl2ShdslLoopbackFailure hdsl2ShdslLoopbackFailure,
hdsl2ShdslpowerBackoff,
hdsl2ShdsldeviceFault,
hdsl2ShdsldcContinuityFault,
hdsl2ShdslconfigInitFailure,
hdsl2ShdslprotocolInitFailure,
hdsl2ShdslnoNeighborPresent,
hdsl2ShdsllocalPowerLoss
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This group supports traps that enable notification of "This group supports traps that enable notification of
Expires May 21, 2001 Page [47]
significant events/conditions associated with HDSL2/SHDSL significant events/conditions associated with HDSL2/SHDSL
lines." lines."
::= { hdsl2ShdslGroups 12 } ::= { hdsl2ShdslGroups 12 }
hdsl2ShdslSpanConfProfileGroup OBJECT-GROUP hdsl2ShdslSpanConfProfileGroup OBJECT-GROUP
OBJECTS OBJECTS
{ {
hdsl2ShdslSpanWireInterface, hdsl2ShdslSpanWireInterface,
hdsl2ShdslSpanMinLineRate, hdsl2ShdslSpanMinLineRate,
hdsl2ShdslSpanMaxLineRate, hdsl2ShdslSpanMaxLineRate,
hdsl2ShdslSpanConfPSD, hdsl2ShdslSpanConfPSD,
hdsl2ShdslSpanConfTransmissionMode, hdsl2ShdslSpanConfTransmissionMode,
hdsl2ShdslSpanRemoteEnabled, hdsl2ShdslSpanRemoteEnabled,
hdsl2ShdslSpanPowerFeeding, hdsl2ShdslSpanPowerFeeding,
hdsl2ShdslSpanConfCurrCondTargetMarginDown,
hdsl2ShdslSpanConfWorstCaseTargetMarginDown,
hdsl2ShdslSpanConfCurrCondTargetMarginUp,
hdsl2ShdslSpanConfWorstCaseTargetMarginUp,
hdsl2ShdslSpanConfUsedTargetMargins,
hdsl2ShdslSpanConfProfileRowStatus hdsl2ShdslSpanConfProfileRowStatus
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This group supports objects that constitute configuration "This group supports objects that constitute configuration
profiles for configuring span related parameters in SHDSL profiles for configuring span related parameters in SHDSL
lines." lines."
::= { hdsl2ShdslGroups 13 } ::= { hdsl2ShdslGroups 13 }
END END
7. Security Considerations 7. Security Considerations
Security issues are not discussed in this memo. There are a number of management objects defined in this MIB that
Expires July 26, 2001 Page [50]
have a MAX-ACCESS clause of read-write and/or read-create. Such
objects may be considered sensitive or vulnerable in some network
environments. The support for SET operations in a non-secure
environment without proper protection can have a negative effect on
network operations.
No managed objects in this MIB contain sensitive information.
SNMPv1 by itself is not a secure environment. Even if the network
itself is secure (for example by using IPSec), even then, there is no
control as to who on the secure network is allowed to access and
GET/SET (read/change/create/delete) the objects in this MIB.
It is recommended that the implementers consider the security
features as provided by the SNMPv3 framework. Specifically, the use
of the User-based Security Model RFC 2574 [12] and the View-
based Access Control Model RFC 2575 [15] is recommended.
It is then a customer/user responsibility to ensure that the SNMP
entity giving access to an instance of this MIB, is properly
configured to give access to the objects only to those principals
(users) that have legitimate rights to indeed GET or SET
(change/create/delete) them.
8. Acknowledgments 8. Acknowledgments
The authors are deeply grateful to the authors of the ADSL LINE MIB The authors are deeply grateful to the authors of the ADSL LINE MIB
(RFC 2662 [25]), Gregory Bathrick and Faye Ly, as much of the text (RFC 2662 [23]), Gregory Bathrick and Faye Ly, as much of the text
and structure of this document originates in their documents. and structure of this document originates in their documents.
The authors are also grateful to the authors of FR MFR MIB (RFC 3020
[24]), Prayson Pate, Bob Lynch, and Kenneth Rehbehn, as the entirety
of the Security Considerations section was lifted from their document.
The authors also acknowledge the importance of contributions and The authors also acknowledge the importance of contributions and
suggestions regarding interface indexing structures received from suggestions regarding interface indexing structures received from
David Horton of CITR. David Horton of CITR.
Other contributions were received from the following: Other contributions were received from the following:
Philip Bergstresser (Adtran) Philip Bergstresser (Adtran)
Steve Blackwell (Adtran) Steve Blackwell (Centillium)
Umberto Bonollo (NEC Australia)
Mark Johnson (Red Point) Mark Johnson (Red Point)
Sharon Mantin (Orckit) Sharon Mantin (Orckit)
Moti Morgenstern (ECI) Moti Morgenstern (ECI)
Raymond Murphy (Ericsson) Raymond Murphy (Ericsson)
Expires May 21, 2001 Page [48] Expires July 26, 2001 Page [51]
Lee Nipper (Verilink)
Katy Sherman (Orckit) Katy Sherman (Orckit)
Mike Sneed (ECI) Mike Sneed (ECI)
Aron Wahl (Memotec) Aron Wahl (Memotec)
Michael Wrobel (Memotec) Michael Wrobel (Memotec)
9. References 9. References
skipping to change at line 2696 skipping to change at line 2901
[10] Case, J., McCloghrie, K., Rose, M., and S. Waldbusser, "Transport [10] Case, J., McCloghrie, K., Rose, M., and S. Waldbusser, "Transport
Mappings for Version 2 of the Simple Network Management Protocol Mappings for Version 2 of the Simple Network Management Protocol
(SNMPv2)", RFC 1906, January 1996. (SNMPv2)", RFC 1906, January 1996.
[11] Case, J., Harrington D., Presuhn R., and B. Wijnen, "Message [11] Case, J., Harrington D., Presuhn R., and B. Wijnen, "Message
Processing and Dispatching for the Simple Network Management Processing and Dispatching for the Simple Network Management
Protocol (SNMP)", RFC 2572, April 1999. Protocol (SNMP)", RFC 2572, April 1999.
[12] Blumenthal, U., and B. Wijnen, "User-based Security Model (USM) [12] Blumenthal, U., and B. Wijnen, "User-based Security Model (USM)
Expires July 26, 2001 Page [52]
for version 3 of the Simple Network Management Protocol (SNMPv3)", for version 3 of the Simple Network Management Protocol (SNMPv3)",
RFC 2574, April 1999. RFC 2574, April 1999.
Expires May 21, 2001 Page [49]
[13] Case, J., McCloghrie, K., Rose, M., and S. Waldbusser, "Protocol [13] Case, J., McCloghrie, K., Rose, M., and S. Waldbusser, "Protocol
Operations for Version 2 of the Simple Network Management Protocol Operations for Version 2 of the Simple Network Management Protocol
(SNMPv2)", RFC 1905, January 1996. (SNMPv2)", RFC 1905, January 1996.
[14] Levi, D., Meyer, P., and B. Stewart, "SNMPv3 Applications", RFC [14] Levi, D., Meyer, P., and B. Stewart, "SNMPv3 Applications", RFC
2573, April 1999. 2573, April 1999.
[15] Wijnen, B., Presuhn, R., and K. McCloghrie, "View-based Access [15] Wijnen, B., Presuhn, R., and K. McCloghrie, "View-based Access
Control Model (VACM) for the Simple Network Management Protocol Control Model (VACM) for the Simple Network Management Protocol
(SNMP)", RFC 2575, April 1999. (SNMP)", RFC 2575, April 1999.
skipping to change at line 2738 skipping to change at line 2944
[21] McCloghrie, K., and Kastenholz, F., "The Interfaces Group MIB", [21] McCloghrie, K., and Kastenholz, F., "The Interfaces Group MIB",
RFC 2863, June 2000. RFC 2863, June 2000.
[22] Tesink, K., "Textual Conventions for MIB Modules Using Performance [22] Tesink, K., "Textual Conventions for MIB Modules Using Performance
History Based on 15 Minute Intervals", RFC 2493, January 1999. History Based on 15 Minute Intervals", RFC 2493, January 1999.
[23] Bathrick, G., Ly, F., "Definitions of Managed Objects for the ADSL [23] Bathrick, G., Ly, F., "Definitions of Managed Objects for the ADSL
Lines", RFC 2662, August 1999. Lines", RFC 2662, August 1999.
[24] Pate, P., Lynch, B., Rehbehn, K., "Definitions of Managed Objects
for Monitoring and Controlling the UNI/NNI Multilink Frame Relay
Function", RFC 3020, December 2000.
10. Intellectual Property Notice 10. Intellectual Property Notice
The IETF takes no position regarding the validity or scope of any The IETF takes no position regarding the validity or scope of any
intellectual property or other rights that might be claimed to intellectual property or other rights that might be claimed to
pertain to the implementation or use of the technology described in pertain to the implementation or use of the technology described in
this document or the extent to which any license under such rights this document or the extent to which any license under such rights
might or might not be available; neither does it represent that it might or might not be available; neither does it represent that it
has made any effort to identify any such rights. Information on the has made any effort to identify any such rights. Information on the
IETF's procedures with respect to rights in standards-track and IETF's procedures with respect to rights in standards-track and
Expires July 26, 2001 Page [53]
standards-related documentation can be found in BCP-11. Copies of standards-related documentation can be found in BCP-11. Copies of
claims of rights made available for publication and any assurances of claims of rights made available for publication and any assurances of
licenses to be made available, or the result of an attempt made to licenses to be made available, or the result of an attempt made to
obtain a general license or permission for the use of such obtain a general license or permission for the use of such
proprietary rights by implementors or users of this specification can proprietary rights by implementors or users of this specification can
be obtained from the IETF Secretariat. be obtained from the IETF Secretariat.
Expires May 21, 2001 Page [50]
The IETF invites any interested party to bring to its attention any The IETF invites any interested party to bring to its attention any
copyrights, patents or patent applications, or other proprietary copyrights, patents or patent applications, or other proprietary
rights which may cover technology that may be required to practice rights which may cover technology that may be required to practice
this standard. Please address the information to the IETF Executive this standard. Please address the information to the IETF Executive
Director. Director.
11. Authors' Addresses 11. Authors' Addresses
Bob Ray Bob Ray
Verilink Corporation Verilink Corporation
127 Jetplex Circle 950 Explorer Blvd
Madison, AL 35758 USA Huntsville, AL 35806 USA
Tel: +1 256-774-2380 Tel: +1 256-327-2380
Fax: +1 256-774-2277 Fax: +1 256-327-2880
E-mail: bray@verilink.com E-mail: bray@verilink.com
Rajesh Abbi Rajesh Abbi
Alcatel USA Alcatel USA
2912 Wake Forest Road 2912 Wake Forest Road
Raleigh, NC 27609-7860 USA Raleigh, NC 27609-7860 USA
Tel: +1 919-950-6194 Tel: +1 919-950-6194
Fax: +1 919-950-6670 Fax: +1 919-950-6670
E-mail: Rajesh.Abbi@usa.alcatel.com E-mail: Rajesh.Abbi@usa.alcatel.com
skipping to change at line 2800 skipping to change at line 3011
document itself may not be modified in any way, such as by removing document itself may not be modified in any way, such as by removing
the copyright notice or references to the Internet Society or other the copyright notice or references to the Internet Society or other
Internet organizations, except as needed for the purpose of Internet organizations, except as needed for the purpose of
developing Internet standards in which case the procedures for developing Internet standards in which case the procedures for
copyrights defined in the Internet Standards process must be copyrights defined in the Internet Standards process must be
followed, or as required to translate it into languages other than followed, or as required to translate it into languages other than
English. English.
The limited permissions granted above are perpetual and will not be The limited permissions granted above are perpetual and will not be
revoked by the Internet Society or its successors or assigns. revoked by the Internet Society or its successors or assigns.
This document and the information contained herein is provided on an This document and the information contained herein is provided on an
"AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING
Expires July 26, 2001 Page [54]
TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION
HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Expires May 21, 2001 Page [51] Expires July 26, 2001 Page [55]
 End of changes. 

This html diff was produced by rfcdiff 1.23, available from http://www.levkowetz.com/ietf/tools/rfcdiff/