draft-ietf-adslmib-vdsl-ext-mcm-00.txt   draft-ietf-adslmib-vdsl-ext-mcm-01.txt 
Network Working Group M. Dodge Network Working Group M. Dodge
Category: Internet Draft Infineon Technologies Category: Internet Draft Infineon Technologies
Document: draft-ietf-adslmib-vdsl-ext-mcm-00.txt B. Ray Document: draft-ietf-adslmib-vdsl-ext-mcm-01.txt B. Ray
PESA Switching Systems PESA Switching Systems
September 2003 February 2004
Definitions of Managed Object Extensions Definitions of Managed Object Extensions
for Very High Speed Digital Subscriber Lines (VDSL) Using for Very High Speed Digital Subscriber Lines (VDSL) Using
Multiple Carrier Modulation (MCM) Line Coding. Multiple Carrier Modulation (MCM) Line Coding.
Status of this Memo Status of this Memo
This document is an Internet-Draft and is in full conformance with This document is an Internet-Draft and is in full conformance with
all provisions of Section 10 of RFC2026. all provisions of Section 10 of RFC2026.
skipping to change at page 1, line 35 skipping to change at page 1, line 35
reference material or to cite them other than as "work in progress." reference material or to cite them other than as "work in progress."
The list of current Internet-Drafts can be accessed at: The list of current Internet-Drafts can be accessed at:
http://www.ietf.org/ietf/1id-abstracts.txt http://www.ietf.org/ietf/1id-abstracts.txt
The list of Internet-Draft Shadow Directories can be accessed at: The list of Internet-Draft Shadow Directories can be accessed at:
http://www.ietf.org/shadow.html. http://www.ietf.org/shadow.html.
Copyright Notice Copyright Notice
Copyright (C) The Internet Society (2003). All Rights Reserved. Copyright (C) The Internet Society (2004). All Rights Reserved.
Abstract Abstract
This document defines a portion of the Management Information Base This document defines a portion of the Management Information Base
(MIB) module for use with network management protocols in the (MIB) module for use with network management protocols in the
Internet community. In particular, it describes objects used for Internet community. In particular, it describes objects used for
managing the Line Code Specific parameters of Very High Speed managing the Line Code Specific parameters of Very High Speed
Digital Subscriber Line (VDSL) interfaces using Multiple Carrier Digital Subscriber Line (VDSL) interfaces using Multiple Carrier
Modulation (MCM) Line Coding. It is an optional extension to the Modulation (MCM) Line Coding. It is an optional extension to the
VDSL-LINE CORE MIB RFC XXXX [RFCXXXX] which handles the line code VDSL-LINE CORE MIB RFC XXXX [RFCXXXX] which handles the line code
skipping to change at page 2, line 15 skipping to change at page 2, line 15
Table of Contents Table of Contents
1. The Internet-Standard Management Framework .................... 2 1. The Internet-Standard Management Framework .................... 2
2. Overview ...................................................... 2 2. Overview ...................................................... 2
2.1 Relationship of this MIB Module to other MIB Modules . 2 2.1 Relationship of this MIB Module to other MIB Modules . 2
2.2 Conventions used in the MIB Module ............................ 3 2.2 Conventions used in the MIB Module ............................ 3
2.3 Structure ..................................................... 3 2.3 Structure ..................................................... 3
2.4 Persistence ................................................... 4 2.4 Persistence ................................................... 4
3. Conformance and Compliance .................................... 5 3. Conformance and Compliance .................................... 5
4. Definitions ................................................... 5 4. Definitions ................................................... 5
5. Intellectual Property ......................................... 18 5. Intellectual Property ......................................... 19
6. Normative References .......................................... 18 6. Normative References .......................................... 19
7. Informative References ........................................ 19 7. Informative References ........................................ 20
8. Security Considerations ....................................... 19 8. Security Considerations ....................................... 21
9. Acknowledgements .............................................. 20 9. Acknowledgements .............................................. 21
10. Authors' Addresses ............................................ 21 10. Authors' Addresses ............................................ 22
11. Full Copyright Statement ...................................... 21 11. Full Copyright Statement ...................................... 22
1. The Internet-Standard Management Framework 1. The Internet-Standard Management Framework
For a detailed overview of the documents that describe the current For a detailed overview of the documents that describe the current
Internet-Standard Management Framework, please refer to section 7 of Internet-Standard Management Framework, please refer to section 7 of
RFC 3410 [RFC3410]. RFC 3410 [RFC3410].
Managed objects are accessed via a virtual information store, termed Managed objects are accessed via a virtual information store, termed
the Management Information Base or MIB. MIB objects are generally the Management Information Base or MIB. MIB objects are generally
accessed through the Simple Network Management Protocol (SNMP). accessed through the Simple Network Management Protocol (SNMP).
skipping to change at page 5, line 37 skipping to change at page 5, line 37
HCPerfValidIntervals, HCPerfValidIntervals,
HCPerfInvalidIntervals, HCPerfInvalidIntervals,
HCPerfTimeElapsed, HCPerfTimeElapsed,
HCPerfIntervalThreshold, HCPerfIntervalThreshold,
HCPerfCurrentCount, HCPerfCurrentCount,
HCPerfIntervalCount FROM HC-PerfHist-TC-MIB HCPerfIntervalCount FROM HC-PerfHist-TC-MIB
MODULE-COMPLIANCE, MODULE-COMPLIANCE,
OBJECT-GROUP, OBJECT-GROUP,
NOTIFICATION-GROUP FROM SNMPv2-CONF NOTIFICATION-GROUP FROM SNMPv2-CONF
ifIndex FROM IF-MIB ifIndex FROM IF-MIB
SnmpAdminString FROM SNMP-FRAMEWORK-MIB; SnmpAdminString FROM SNMP-FRAMEWORK-MIB
vdslLineConfProfileName FROM VDSL-LINE-MIB vdslLineConfProfileName FROM VDSL-LINE-MIB;
vdslExtMCMMIB MODULE-IDENTITY vdslExtMCMMIB MODULE-IDENTITY
LAST-UPDATED "200309230000Z" -- September 23, 2003 LAST-UPDATED "200402120000Z" -- February 12, 2004
ORGANIZATION "ADSLMIB Working Group" ORGANIZATION "ADSLMIB Working Group"
CONTACT-INFO "WG-email: adslmib@ietf.org CONTACT-INFO "WG-email: adslmib@ietf.org
Info: https://www1.ietf.org/mailman/listinfo/adslmib Info: https://www1.ietf.org/mailman/listinfo/adslmib
Chair: Mike Sneed Chair: Mike Sneed
Sand Channel Systems Sand Channel Systems
Postal: P.O. Box 37324 Postal: P.O. Box 37324
Raleigh NC 27627-732 Raleigh NC 27627-732
Email: sneedmike@hotmail.com Email: sneedmike@hotmail.com
Phone: +1 206 600 7022 Phone: +1 206 600 7022
skipping to change at page 6, line 56 skipping to change at page 7, line 4
Lpr -- Loss of Power Lpr -- Loss of Power
xxxs -- Interval of Seconds in which xxx occurs xxxs -- Interval of Seconds in which xxx occurs
(e.g., xxx=Lof, Los, Lpr) (e.g., xxx=Lof, Los, Lpr)
Max -- Maximum Max -- Maximum
Mgn -- Margin Mgn -- Margin
Min -- Minimum Min -- Minimum
Psd -- Power Spectral Density Psd -- Power Spectral Density
Snr -- Signal to Noise Ratio Snr -- Signal to Noise Ratio
Tx -- Transmit Tx -- Transmit
Blks -- Blocks Blks -- Blocks
" Copyright (C) The Internet Society (2004). This version
vdslLineExtMCMMib OBJECT IDENTIFIER ::= { vdslEXTMCMMIB 1 } of this MIB module is part of RFC XXXX: see the RFC
vdslEXTMCMMibObjects OBJECT IDENTIFIER ::= { vdslLineExtMCMMib 1 } itself for full legal notices."
-- RFC Ed.: replace XXXX with assigned number & remove this note
REVISION "200402120000Z" -- February 12, 2004
DESCRIPTION "Initial version, published as RFC XXXX."
-- RFC Ed.: replace XXXX with assigned number & remove this note
::= { vdslMIB XX } -- To be assigned by IANA
-- RFC Ed.: we suggest to put it under { vdslMIB 3 } because
-- vdslMIB 1 is the VDSL core MIB, vdslMIB 2 is the SCM
-- extension MIB, while vdslMIB 3 is the MCM extension MIB.
vdslLineExtMCMMib OBJECT IDENTIFIER ::= { vdslExtMCMMIB 1 }
vdslLineExtMCMMibObjects OBJECT IDENTIFIER ::= {vdslLineExtMCMMib 1}
-- --
-- Multiple carrier modulation (MCM) configuration profile tables -- Multiple carrier modulation (MCM) configuration profile tables
-- --
vdslLineMCMConfProfileTable OBJECT-TYPE vdslLineMCMConfProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF VdslLineMCMConfProfileEntry SYNTAX SEQUENCE OF VdslLineMCMConfProfileEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table contains additional information on "This table contains additional information on
multiple carrier VDSL lines. One entry in this table multiple carrier VDSL lines. One entry in this table
reflects a profile defined by a manager which can be used reflects a profile defined by a manager which can be used
to configure the VDSL line. to configure the VDSL line.
The entries in this table MUST NOT be used for single The entries in this table MUST NOT be used for single
carrier (SCM) VDSL lines." carrier (SCM) VDSL lines."
::= { vdslEXTMCMMibObjects 1 } ::= { vdslLineExtMCMMibObjects 1 }
vdslLineMCMConfProfileEntry OBJECT-TYPE vdslLineMCMConfProfileEntry OBJECT-TYPE
SYNTAX VdslLineMCMConfProfileEntry SYNTAX VdslLineMCMConfProfileEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Each entry consists of a list of parameters that "Each entry consists of a list of parameters that
represents the configuration of a multiple carrier represents the configuration of a multiple carrier
modulation VDSL modem. modulation VDSL modem.
A default profile with an index of 'DEFVAL', will always A default profile with an index of 'DEFVAL', will always
exist and its parameters will be set to vendor specific exist and its parameters will be set to vendor specific
values, unless otherwise specified in this document." values, unless otherwise specified in this document."
INDEX { vdslLineConfProfileName } INDEX { vdslLineConfProfileName }
::= { vdslLineMCMConfProfileTable 1 } ::= { vdslLineMCMConfProfileTable 1 }
VdslLineMCMConfProfileEntry ::= VdslLineMCMConfProfileEntry ::=
SEQUENCE SEQUENCE
{ {
vdslMCMConfProfileTxWindowLength Unsigned32, vdslLineMCMConfProfileTxWindowLength Unsigned32,
vdslMCMConfProfileRowStatus RowStatus vdslLineMCMConfProfileRowStatus RowStatus
} }
vdslLineMCMConfProfileTxWindowLength OBJECT-TYPE
vdslMCMConfProfileTxWindowLength OBJECT-TYPE
SYNTAX Unsigned32 (1..255) SYNTAX Unsigned32 (1..255)
UNITS "samples" UNITS "samples"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Specifies the length of the transmit window, counted "Specifies the length of the transmit window, counted
in samples at the sampling rate corresponding to the in samples at the sampling rate corresponding to the
negotiated value of N." negotiated value of N."
REFERENCE "T1E1.4/2000-013R4" -- Part 3, MCM REFERENCE "T1E1.4/2000-013R4" -- Part 3, MCM
::= { vdslLineMCMConfProfileEntry 1 } ::= { vdslLineMCMConfProfileEntry 1 }
vdslMCMConfProfileRowStatus OBJECT-TYPE
vdslLineMCMConfProfileRowStatus OBJECT-TYPE
SYNTAX RowStatus SYNTAX RowStatus
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object is used to create a new row or modify or "This object is used to create a new row or modify or
delete an existing row in this table. delete an existing row in this table.
A profile activated by setting this object to `active'. A profile activated by setting this object to `active'.
When `active' is set, the system will validate the profile. When `active' is set, the system will validate the profile.
skipping to change at page 8, line 35 skipping to change at page 8, line 47
DESCRIPTION DESCRIPTION
"This table contains transmit band descriptor configuration "This table contains transmit band descriptor configuration
information for a VDSL line. Each entry in this table information for a VDSL line. Each entry in this table
reflects the configuration for one of possibly many bands reflects the configuration for one of possibly many bands
with a multiple carrier modulation (MCM) VDSL line. with a multiple carrier modulation (MCM) VDSL line.
These entries are defined by a manager and can be used to These entries are defined by a manager and can be used to
configure the VDSL line. configure the VDSL line.
The entries in this table MUST NOT be used for single The entries in this table MUST NOT be used for single
carrier (SCM) VDSL lines." carrier (SCM) VDSL lines."
::= { vdslEXTMCMMibObjects 2 } ::= { vdslLineExtMCMMibObjects 2 }
vdslLineMCMConfProfileTxBandEntry OBJECT-TYPE vdslLineMCMConfProfileTxBandEntry OBJECT-TYPE
SYNTAX VdslLineMCMConfProfileTxBandEntry SYNTAX VdslLineMCMConfProfileTxBandEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Each entry consists of a transmit band descriptor, which "Each entry consists of a transmit band descriptor, which
is defined by a start and a stop tone index. is defined by a start and a stop tone index.
A default profile with an index of 'DEFVAL', will A default profile with an index of 'DEFVAL', will
always exist and its parameters will be set to vendor always exist and its parameters will be set to vendor
specific values, unless otherwise specified in this specific values, unless otherwise specified in this
document." document."
INDEX { vdslLineConfProfileName, INDEX { vdslLineConfProfileName,
vdslMCMConfProfileTxBandNumber } vdslLineMCMConfProfileTxBandNumber }
::= { vdslLineMCMConfProfileTxBandTable 1 } ::= { vdslLineMCMConfProfileTxBandTable 1 }
VdslLineMCMConfProfileTxBandEntry ::= VdslLineMCMConfProfileTxBandEntry ::=
SEQUENCE SEQUENCE
{ {
vdslMCMConfProfileTxBandNumber Unsigned32, vdslLineMCMConfProfileTxBandNumber Unsigned32,
vdslMCMConfProfileTxBandStart Unsigned32, vdslLineMCMConfProfileTxBandStart Unsigned32,
vdslMCMConfProfileTxBandStop Unsigned32, vdslLineMCMConfProfileTxBandStop Unsigned32,
vdslMCMConfProfileTxBandRowStatus RowStatus vdslLineMCMConfProfileTxBandRowStatus RowStatus
} }
vdslMCMConfProfileTxBandNumber OBJECT-TYPE vdslLineMCMConfProfileTxBandNumber OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The index for this band descriptor entry." "The index for this band descriptor entry."
::= { vdslLineMCMConfProfileTxBandEntry 1 } ::= { vdslLineMCMConfProfileTxBandEntry 1 }
vdslMCMConfProfileTxBandStart OBJECT-TYPE vdslLineMCMConfProfileTxBandStart OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Start tone index for this band." "Start tone index for this band."
REFERENCE "T1E1.4/2000-013R4" -- Part 3, MCM REFERENCE "T1E1.4/2000-013R4" -- Part 3, MCM
::= { vdslLineMCMConfProfileTxBandEntry 2 } ::= { vdslLineMCMConfProfileTxBandEntry 2 }
vdslMCMConfProfileTxBandStop OBJECT-TYPE vdslLineMCMConfProfileTxBandStop OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Stop tone index for this band." "Stop tone index for this band."
REFERENCE "T1E1.4/2000-013R4" -- Part 3, MCM REFERENCE "T1E1.4/2000-013R4" -- Part 3, MCM
::= { vdslLineMCMConfProfileTxBandEntry 3 } ::= { vdslLineMCMConfProfileTxBandEntry 3 }
vdslLineMCMConfProfileTxBandRowStatus OBJECT-TYPE
vdslMCMConfProfileTxBandRowStatus OBJECT-TYPE
SYNTAX RowStatus SYNTAX RowStatus
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object is used to create a new row or modify or "This object is used to create a new row or modify or
delete an existing row in this table. delete an existing row in this table.
A profile activated by setting this object to `active'. A profile activated by setting this object to `active'.
When `active' is set, the system will validate the profile. When `active' is set, the system will validate the profile.
Before a profile can be deleted or taken out of Before a profile can be deleted or taken out of
skipping to change at page 10, line 18 skipping to change at page 10, line 34
DESCRIPTION DESCRIPTION
"This table contains receive band descriptor configuration "This table contains receive band descriptor configuration
information for a VDSL line. Each entry in this table information for a VDSL line. Each entry in this table
reflects the configuration for one of possibly many bands reflects the configuration for one of possibly many bands
with a multiple carrier modulation (MCM) VDSL line. with a multiple carrier modulation (MCM) VDSL line.
These entries are defined by a manager and can be used to These entries are defined by a manager and can be used to
configure the VDSL line. configure the VDSL line.
The entries in this table MUST NOT be used for single The entries in this table MUST NOT be used for single
carrier (SCM) VDSL lines." carrier (SCM) VDSL lines."
::= { vdslEXTMCMMibObjects 3 } ::= { vdslLineExtMCMMibObjects 3 }
vdslLineMCMConfProfileRxBandEntry OBJECT-TYPE vdslLineMCMConfProfileRxBandEntry OBJECT-TYPE
SYNTAX VdslLineMCMConfProfileRxBandEntry SYNTAX VdslLineMCMConfProfileRxBandEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Each entry consists of a transmit band descriptor, which "Each entry consists of a transmit band descriptor, which
is defined by a start and a stop tone index. is defined by a start and a stop tone index.
A default profile with an index of 'DEFVAL', will A default profile with an index of 'DEFVAL', will
always exist and its parameters will be set to vendor always exist and its parameters will be set to vendor
specific values, unless otherwise specified in this specific values, unless otherwise specified in this
document." document."
INDEX { vdslLineConfProfileName, INDEX { vdslLineConfProfileName,
vdslMCMConfProfileRxBandNumber } vdslLineMCMConfProfileRxBandNumber }
::= { vdslLineMCMConfProfileRxBandTable 1 } ::= { vdslLineMCMConfProfileRxBandTable 1 }
VdslLineMCMConfProfileRxBandEntry ::= VdslLineMCMConfProfileRxBandEntry ::=
SEQUENCE SEQUENCE
{ {
vdslMCMConfProfileRxBandNumber Unsigned32, vdslLineMCMConfProfileRxBandNumber Unsigned32,
vdslMCMConfProfileRxBandStart Unsigned32, vdslLineMCMConfProfileRxBandStart Unsigned32,
vdslMCMConfProfileRxBandStop Unsigned32, vdslLineMCMConfProfileRxBandStop Unsigned32,
vdslMCMConfProfileRxBandRowStatus RowStatus vdslLineMCMConfProfileRxBandRowStatus RowStatus
} }
vdslMCMConfProfileRxBandNumber OBJECT-TYPE vdslLineMCMConfProfileRxBandNumber OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The index for this band descriptor entry." "The index for this band descriptor entry."
::= { vdslLineMCMConfProfileRxBandEntry 1 } ::= { vdslLineMCMConfProfileRxBandEntry 1 }
vdslMCMConfProfileRxBandStart OBJECT-TYPE
vdslLineMCMConfProfileRxBandStart OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Start tone index for this band." "Start tone index for this band."
REFERENCE "T1E1.4/2000-013R4" -- Part 3, MCM REFERENCE "T1E1.4/2000-013R4" -- Part 3, MCM
::= { vdslLineMCMConfProfileRxBandEntry 2 } ::= { vdslLineMCMConfProfileRxBandEntry 2 }
vdslMCMConfProfileRxBandStop OBJECT-TYPE vdslLineMCMConfProfileRxBandStop OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Stop tone index for this band." "Stop tone index for this band."
REFERENCE "T1E1.4/2000-013R4" -- Part 3, MCM REFERENCE "T1E1.4/2000-013R4" -- Part 3, MCM
::= { vdslLineMCMConfProfileRxBandEntry 3 } ::= { vdslLineMCMConfProfileRxBandEntry 3 }
vdslMCMConfProfileRxBandRowStatus OBJECT-TYPE vdslLineMCMConfProfileRxBandRowStatus OBJECT-TYPE
SYNTAX RowStatus SYNTAX RowStatus
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object is used to create a new row or modify or "This object is used to create a new row or modify or
delete an existing row in this table. delete an existing row in this table.
A profile activated by setting this object to `active'. A profile activated by setting this object to `active'.
When `active' is set, the system will validate the profile. When `active' is set, the system will validate the profile.
skipping to change at page 11, line 53 skipping to change at page 12, line 18
DESCRIPTION DESCRIPTION
"This table contains transmit PSD mask descriptor "This table contains transmit PSD mask descriptor
configuration information for a VDSL line. Each entry in configuration information for a VDSL line. Each entry in
this table reflects the configuration for one tone within this table reflects the configuration for one tone within
a multiple carrier modulation (MCM) VDSL line. These a multiple carrier modulation (MCM) VDSL line. These
entries are defined by a manager and can be used to entries are defined by a manager and can be used to
configure the VDSL line. configure the VDSL line.
The entries in this table MUST NOT be used for single The entries in this table MUST NOT be used for single
carrier (SCM) VDSL lines." carrier (SCM) VDSL lines."
::= { vdslEXTMCMMibObjects 4 } ::= { vdslLineExtMCMMibObjects 4 }
vdslLineMCMConfProfileTxPSDEntry OBJECT-TYPE vdslLineMCMConfProfileTxPSDEntry OBJECT-TYPE
SYNTAX VdslLineMCMConfProfileTxPSDEntry SYNTAX VdslLineMCMConfProfileTxPSDEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Each entry consists of a transmit PSD mask descriptor, "Each entry consists of a transmit PSD mask descriptor,
which defines the power spectral density (PSD) for a tone. which defines the power spectral density (PSD) for a tone.
A default profile with an index of 'DEFVAL', will A default profile with an index of 'DEFVAL', will
always exist and its parameters will be set to vendor always exist and its parameters will be set to vendor
specific values, unless otherwise specified in this specific values, unless otherwise specified in this
document." document."
INDEX { vdslLineConfProfileName, INDEX { vdslLineConfProfileName,
vdslMCMConfProfileTxPSDNumber } vdslLineMCMConfProfileTxPSDNumber }
::= { vdslLineMCMConfProfileTxPSDTable 1 } ::= { vdslLineMCMConfProfileTxPSDTable 1 }
VdslLineMCMConfProfileTxPSDEntry ::= VdslLineMCMConfProfileTxPSDEntry ::=
SEQUENCE SEQUENCE
{ {
vdslMCMConfProfileTxPSDNumber Unsigned32, vdslLineMCMConfProfileTxPSDNumber Unsigned32,
vdslMCMConfProfileTxPSDTone Unsigned32, vdslLineMCMConfProfileTxPSDTone Unsigned32,
vdslMCMConfProfileTxPSDPSD Unsigned32, vdslLineMCMConfProfileTxPSDPSD Unsigned32,
vdslMCMConfProfileTxPSDRowStatus RowStatus vdslLineMCMConfProfileTxPSDRowStatus RowStatus
} }
vdslMCMConfProfileTxPSDNumber OBJECT-TYPE vdslLineMCMConfProfileTxPSDNumber OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The index for this mask descriptor entry." "The index for this mask descriptor entry."
::= { vdslLineMCMConfProfileTxPSDEntry 1 } ::= { vdslLineMCMConfProfileTxPSDEntry 1 }
vdslLineMCMConfProfileTxPSDTone OBJECT-TYPE
vdslMCMConfProfileTxPSDTone OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The tone index for which the PSD is being specified." "The tone index for which the PSD is being specified."
REFERENCE "T1E1.4/2000-013R4" -- Part 3, MCM REFERENCE "T1E1.4/2000-013R4" -- Part 3, MCM
::= { vdslLineMCMConfProfileTxPSDEntry 2 } ::= { vdslLineMCMConfProfileTxPSDEntry 2 }
vdslMCMConfProfileTxPSDPSD OBJECT-TYPE vdslLineMCMConfProfileTxPSDPSD OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "0.5dBm" UNITS "0.5dBm"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Power Spectral Density level in steps of 0.5dB with "Power Spectral Density level in steps of 0.5dB with
an offset of -140dbm/Hz." an offset of -140dbm/Hz."
REFERENCE "T1E1.4/2000-013R4" -- Part 3, MCM REFERENCE "T1E1.4/2000-013R4" -- Part 3, MCM
::= { vdslLineMCMConfProfileTxPSDEntry 3 } ::= { vdslLineMCMConfProfileTxPSDEntry 3 }
vdslMCMConfProfileTxPSDRowStatus OBJECT-TYPE
vdslLineMCMConfProfileTxPSDRowStatus OBJECT-TYPE
SYNTAX RowStatus SYNTAX RowStatus
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object is used to create a new row or modify or "This object is used to create a new row or modify or
delete an existing row in this table. delete an existing row in this table.
A profile activated by setting this object to `active'. A profile activated by setting this object to `active'.
When `active' is set, the system will validate the profile. When `active' is set, the system will validate the profile.
skipping to change at page 13, line 35 skipping to change at page 13, line 55
DESCRIPTION DESCRIPTION
"This table contains transmit maximum PSD mask descriptor "This table contains transmit maximum PSD mask descriptor
configuration information for a VDSL line. Each entry in configuration information for a VDSL line. Each entry in
this table reflects the configuration for one tone within this table reflects the configuration for one tone within
a multiple carrier modulation (MCM) VDSL modem. These a multiple carrier modulation (MCM) VDSL modem. These
entries are defined by a manager and can be used to entries are defined by a manager and can be used to
configure the VDSL line. configure the VDSL line.
The entries in this table MUST NOT be used for single The entries in this table MUST NOT be used for single
carrier (SCM) VDSL lines." carrier (SCM) VDSL lines."
::= { vdslEXTMCMMibObjects 5 } ::= { vdslLineExtMCMMibObjects 5 }
vdslLineMCMConfProfileMaxTxPSDEntry OBJECT-TYPE vdslLineMCMConfProfileMaxTxPSDEntry OBJECT-TYPE
SYNTAX VdslLineMCMConfProfileMaxTxPSDEntry SYNTAX VdslLineMCMConfProfileMaxTxPSDEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Each entry consists of a transmit PSD mask descriptor, "Each entry consists of a transmit PSD mask descriptor,
which defines the maximum power spectral density (PSD) which defines the maximum power spectral density (PSD)
for a tone. for a tone.
A default profile with an index of 'DEFVAL', will A default profile with an index of 'DEFVAL', will
always exist and its parameters will be set to vendor always exist and its parameters will be set to vendor
specific values, unless otherwise specified in this specific values, unless otherwise specified in this
document." document."
INDEX { vdslLineConfProfileName, INDEX { vdslLineConfProfileName,
vdslMCMConfProfileMaxTxPSDNumber } vdslLineMCMConfProfileMaxTxPSDNumber }
::= { vdslLineMCMConfProfileMaxTxPSDTable 1 } ::= { vdslLineMCMConfProfileMaxTxPSDTable 1 }
VdslLineMCMConfProfileMaxTxPSDEntry ::= VdslLineMCMConfProfileMaxTxPSDEntry ::=
SEQUENCE SEQUENCE
{ {
vdslMCMConfProfileMaxTxPSDNumber Unsigned32, vdslLineMCMConfProfileMaxTxPSDNumber Unsigned32,
vdslMCMConfProfileMaxTxPSDTone Unsigned32, vdslLineMCMConfProfileMaxTxPSDTone Unsigned32,
vdslMCMConfProfileMaxTxPSDPSD Unsigned32, vdslLineMCMConfProfileMaxTxPSDPSD Unsigned32,
vdslMCMConfProfileMaxTxPSDRowStatus RowStatus vdslLineMCMConfProfileMaxTxPSDRowStatus RowStatus
} }
vdslMCMConfProfileMaxTxPSDNumber OBJECT-TYPE vdslLineMCMConfProfileMaxTxPSDNumber OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The index for this band descriptor entry." "The index for this band descriptor entry."
::= { vdslLineMCMConfProfileMaxTxPSDEntry 1 } ::= { vdslLineMCMConfProfileMaxTxPSDEntry 1 }
vdslMCMConfProfileMaxTxPSDTone OBJECT-TYPE vdslLineMCMConfProfileMaxTxPSDTone OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The tone index for which the PSD is being specified." "The tone index for which the PSD is being specified."
REFERENCE "T1E1.4/2000-013R4" -- Part 3, MCM REFERENCE "T1E1.4/2000-013R4" -- Part 3, MCM
::= { vdslLineMCMConfProfileMaxTxPSDEntry 2 } ::= { vdslLineMCMConfProfileMaxTxPSDEntry 2 }
vdslLineMCMConfProfileMaxTxPSDPSD OBJECT-TYPE
vdslMCMConfProfileMaxTxPSDPSD OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "0.5dBm" UNITS "0.5dBm"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Power Spectral Density level in steps of 0.5dB with "Power Spectral Density level in steps of 0.5dB with
an offset of -140dbm/Hz." an offset of -140dbm/Hz."
REFERENCE "T1E1.4/2000-013R4" -- Part 3, MCM REFERENCE "T1E1.4/2000-013R4" -- Part 3, MCM
::= { vdslLineMCMConfProfileMaxTxPSDEntry 3 } ::= { vdslLineMCMConfProfileMaxTxPSDEntry 3 }
vdslMCMConfProfileMaxTxPSDRowStatus OBJECT-TYPE vdslLineMCMConfProfileMaxTxPSDRowStatus OBJECT-TYPE
SYNTAX RowStatus SYNTAX RowStatus
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object is used to create a new row or modify or "This object is used to create a new row or modify or
delete an existing row in this table. delete an existing row in this table.
A profile activated by setting this object to `active'. A profile activated by setting this object to `active'.
When `active' is set, the system will validate the profile. When `active' is set, the system will validate the profile.
skipping to change at page 15, line 18 skipping to change at page 15, line 46
DESCRIPTION DESCRIPTION
"This table contains maximum receive PSD mask descriptor "This table contains maximum receive PSD mask descriptor
configuration information for a VDSL line. Each entry in configuration information for a VDSL line. Each entry in
this table reflects the configuration for one tone within this table reflects the configuration for one tone within
a multiple carrier modulation (MCM) VDSL modem. These a multiple carrier modulation (MCM) VDSL modem. These
entries are defined by a manager and can be used to entries are defined by a manager and can be used to
configure the VDSL line. configure the VDSL line.
The entries in this table MUST NOT be used for single The entries in this table MUST NOT be used for single
carrier (SCM) VDSL lines." carrier (SCM) VDSL lines."
::= { vdslEXTMCMMibObjects 6 } ::= { vdslLineExtMCMMibObjects 6 }
vdslLineMCMConfProfileMaxRxPSDEntry OBJECT-TYPE vdslLineMCMConfProfileMaxRxPSDEntry OBJECT-TYPE
SYNTAX VdslLineMCMConfProfileMaxRxPSDEntry SYNTAX VdslLineMCMConfProfileMaxRxPSDEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Each entry consists of a transmit PSD mask descriptor, "Each entry consists of a transmit PSD mask descriptor,
which defines the power spectral density (PSD) for a which defines the power spectral density (PSD) for a
tone. tone.
A default profile with an index of 'DEFVAL', will A default profile with an index of 'DEFVAL', will
always exist and its parameters will be set to vendor always exist and its parameters will be set to vendor
specific values, unless otherwise specified in this specific values, unless otherwise specified in this
document." document."
INDEX { vdslLineConfProfileName, INDEX { vdslLineConfProfileName,
vdslMCMConfProfileMaxRxPSDNumber } vdslLineMCMConfProfileMaxRxPSDNumber }
::= { vdslLineMCMConfProfileMaxRxPSDTable 1 } ::= { vdslLineMCMConfProfileMaxRxPSDTable 1 }
VdslLineMCMConfProfileMaxRxPSDEntry ::= VdslLineMCMConfProfileMaxRxPSDEntry ::=
SEQUENCE SEQUENCE
{ {
vdslMCMConfProfileMaxRxPSDNumber Unsigned32, vdslLineMCMConfProfileMaxRxPSDNumber Unsigned32,
vdslMCMConfProfileMaxRxPSDTone Unsigned32, vdslLineMCMConfProfileMaxRxPSDTone Unsigned32,
vdslMCMConfProfileMaxRxPSDPSD Unsigned32, vdslLineMCMConfProfileMaxRxPSDPSD Unsigned32,
vdslMCMConfProfileMaxRxPSDRowStatus RowStatus vdslLineMCMConfProfileMaxRxPSDRowStatus RowStatus
} }
vdslMCMConfProfileMaxRxPSDNumber OBJECT-TYPE vdslLineMCMConfProfileMaxRxPSDNumber OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The index for this band descriptor entry." "The index for this band descriptor entry."
::= { vdslLineMCMConfProfileMaxRxPSDEntry 1 } ::= { vdslLineMCMConfProfileMaxRxPSDEntry 1 }
vdslMCMConfProfileMaxRxPSDTone OBJECT-TYPE
vdslLineMCMConfProfileMaxRxPSDTone OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The tone index for which the PSD is being specified." "The tone index for which the PSD is being specified."
REFERENCE "T1E1.4/2000-013R4" -- Part 3, MCM REFERENCE "T1E1.4/2000-013R4" -- Part 3, MCM
::= { vdslLineMCMConfProfileMaxRxPSDEntry 2 } ::= { vdslLineMCMConfProfileMaxRxPSDEntry 2 }
vdslLineMCMConfProfileMaxRxPSDPSD OBJECT-TYPE
vdslMCMConfProfileMaxRxPSDPSD OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "0.5dBm" UNITS "0.5dBm"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Power Spectral Density level in steps of 0.5dB with "Power Spectral Density level in steps of 0.5dB with
an offset of -140dbm/Hz." an offset of -140dbm/Hz."
REFERENCE "T1E1.4/2000-013R4" -- Part 3, MCM REFERENCE "T1E1.4/2000-013R4" -- Part 3, MCM
::= { vdslLineMCMConfProfileMaxRxPSDEntry 3 } ::= { vdslLineMCMConfProfileMaxRxPSDEntry 3 }
vdslMCMConfProfileMaxRxPSDRowStatus OBJECT-TYPE vdslLineMCMConfProfileMaxRxPSDRowStatus OBJECT-TYPE
SYNTAX RowStatus SYNTAX RowStatus
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object is used to create a new row or modify or "This object is used to create a new row or modify or
delete an existing row in this table. delete an existing row in this table.
A profile activated by setting this object to `active'. A profile activated by setting this object to `active'.
When `active' is set, the system will validate the profile. When `active' is set, the system will validate the profile.
Before a profile can be deleted or taken out of Before a profile can be deleted or taken out of
service, (by setting this object to `destroy' or service, (by setting this object to `destroy' or
`outOfService') it must be first unreferenced `outOfService') it must be first unreferenced
from all associated lines." from all associated lines."
::= { vdslLineMCMConfProfileMaxRxPSDEntry 4 } ::= { vdslLineMCMConfProfileMaxRxPSDEntry 4 }
-- conformance information -- conformance information
vdslExtMCMConformance OBJECT IDENTIFIER ::= { vdslLineExtMCMMib 2 } vdslLineExtMCMConformance OBJECT IDENTIFIER ::=
vdslExtMCMGroups OBJECT IDENTIFIER ::= { vdslExtMCMConformance 1 } {vdslLineExtMCMMib 2}
vdslExtMCMCompliances OBJECT IDENTIFIER ::= vdslLineExtMCMGroups OBJECT IDENTIFIER ::=
{ vdslExtMCMConformance 2 } { vdslLineExtMCMConformance 1 }
vdslLineExtMCMCompliances OBJECT IDENTIFIER ::=
{ vdslLineExtMCMConformance 2 }
vdslLineExtMCMMibCompliance MODULE-COMPLIANCE vdslLineExtMCMMibCompliance MODULE-COMPLIANCE
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The compliance statement for SNMP entities which "The compliance statement for SNMP entities which
manage VDSL interfaces." manage VDSL interfaces."
MODULE -- this module MODULE -- this module
GROUP vdslLineExtMCMGroup
GROUP vdslMCMGroup
DESCRIPTION DESCRIPTION
"This group is an optional extension for VDSL lines which "This group is an optional extension for VDSL lines which
utilize Multiple Carrier Modulation (MCM)." utilize Multiple Carrier Modulation (MCM)."
::= { vdslCompliances 1 } ::= { vdslLineExtMCMCompliances 1 }
-- units of conformance -- units of conformance
vdslMCMGroup OBJECT-GROUP vdslLineExtMCMGroup OBJECT-GROUP
OBJECTS OBJECTS
{ {
vdslMCMConfProfileTxWindowLength, vdslLineMCMConfProfileTxWindowLength,
vdslMCMConfProfileRowStatus, vdslLineMCMConfProfileRowStatus,
vdslMCMConfProfileTxBandStart, vdslLineMCMConfProfileTxBandStart,
vdslMCMConfProfileTxBandStop, vdslLineMCMConfProfileTxBandStop,
vdslMCMConfProfileTxBandRowStatus, vdslLineMCMConfProfileTxBandRowStatus,
vdslMCMConfProfileRxBandStart, vdslLineMCMConfProfileRxBandStart,
vdslMCMConfProfileRxBandStop, vdslLineMCMConfProfileRxBandStop,
vdslMCMConfProfileRxBandRowStatus, vdslLineMCMConfProfileRxBandRowStatus,
vdslMCMConfProfileTxPSDTone, vdslLineMCMConfProfileTxPSDTone,
vdslMCMConfProfileTxPSDPSD, vdslLineMCMConfProfileTxPSDPSD,
vdslMCMConfProfileTxPSDRowStatus, vdslLineMCMConfProfileTxPSDRowStatus,
vdslMCMConfProfileMaxTxPSDTone, vdslLineMCMConfProfileMaxTxPSDTone,
vdslMCMConfProfileMaxTxPSDPSD, vdslLineMCMConfProfileMaxTxPSDPSD,
vdslMCMConfProfileMaxTxPSDRowStatus, vdslLineMCMConfProfileMaxTxPSDRowStatus,
vdslMCMConfProfileMaxRxPSDTone, vdslLineMCMConfProfileMaxRxPSDTone,
vdslMCMConfProfileMaxRxPSDPSD, vdslLineMCMConfProfileMaxRxPSDPSD,
vdslMCMConfProfileMaxRxPSDRowStatus vdslLineMCMConfProfileMaxRxPSDRowStatus
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A collection of objects providing configuration "A collection of objects providing configuration
information for a VDSL line based upon multiple information for a VDSL line based upon multiple
carrier modulation modem." carrier modulation modem."
::= { vdslGroups 1 } ::= { vdslLineExtMCMGroup 1 }
END END
5. Intellectual Property Notice 5. Intellectual Property Notice
The IETF takes no position regarding the validity or scope of any The IETF takes no position regarding the validity or scope of any
intellectual property or other rights that might be claimed to intellectual property or other rights that might be claimed to
pertain to the implementation or use of the technology described in pertain to the implementation or use of the technology described in
this document or the extent to which any license under such rights this document or the extent to which any license under such rights
might or might not be available; neither does it represent that it might or might not be available; neither does it represent that it
skipping to change at page 18, line 29 skipping to change at page 19, line 29
can be obtained from the IETF Secretariat. can be obtained from the IETF Secretariat.
The IETF invites any interested party to bring to its attention any The IETF invites any interested party to bring to its attention any
copyrights, patents or patent applications, or other proprietary copyrights, patents or patent applications, or other proprietary
rights which may cover technology that may be required to practice rights which may cover technology that may be required to practice
this standard. Please address the information to the IETF Executive this standard. Please address the information to the IETF Executive
Director. Director.
6. Normative References 6. Normative References
[DSLFTR057] DSL Forum TR-057, "VDSL Network Element Management",
February 2003.
[ETSI2701] ETSI TS 101 270-1 V1.2.1 "Transmission and Multiplexing [ETSI2701] ETSI TS 101 270-1 V1.2.1 "Transmission and Multiplexing
(TM); Access transmission systems on metallic access (TM); Access transmission systems on metallic access
cables; Very high speed Digital Subscriber Line (VDSL); cables; Very high speed Digital Subscriber Line (VDSL);
Part 1: Functional requirements", October 1999. Part 1: Functional requirements", October 1999.
[ETSI2702] ETSI TS 101 270-2 V1.1.1 "Transmission and Multiplexing [ETSI2702] ETSI TS 101 270-2 V1.1.1 "Transmission and Multiplexing
(TM); Access transmission systems on metallic access (TM); Access transmission systems on metallic access
cables; Very high speed Digital Subscriber Line (VDSL); cables; Very high speed Digital Subscriber Line (VDSL);
Part 1: Transceiver specification", February 2001. Part 1: Transceiver specification", February 2001.
[ITU9931] ITU-T G.993.1 "Very-high-speed digital subscriber line [ITU9931] ITU-T G.993.1 "Very-high-speed digital subscriber line
foundation", November 2001. foundation", November 2001.
[ITU9971] ITU-T G.997.1 "Physical layer management for Digital [ITU9971] ITU-T G.997.1 "Physical layer management for Digital
Subscriber Line (DSL) Transceivers", July 1999. Subscriber Line (DSL) Transceivers", July 1999.
[RFC2493] Tesink, K., "Textual Conventions for MIB Modules Using [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Performance History Based on 15 Minute Intervals", RFC Requirement Levels", BCP 14, RFC 2119, March 1997.
2493, January 1999.
[RFC2578] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J., [RFC2578] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case,
Rose, M. and S. Waldbusser, "Structure of Management J., Rose, M. and S. Waldbusser, "Structure of
Information Version 2 (SMIv2)", STD 58, RFC 2578, April Management Information Version 2 (SMIv2)", STD 58, RFC
1999. 2578, April 1999.
[RFC2579] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J., [RFC2579] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case,
Rose, M. and S. Waldbusser, "Textual Conventions for J., Rose, M. and S. Waldbusser, "Textual Conventions
SMIv2", STD 58, RFC 2579, April 1999. for SMIv2", STD 58, RFC 2579, April 1999.
[RFC2580] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J., [RFC2580] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case,
Rose, M. and S. Waldbusser, "Conformance Statements for J., Rose, M. and S. Waldbusser, "Conformance
SMIv2", STD 58, RFC 2580, April 1999. Statements for SMIv2", STD 58, RFC 2580, April 1999.
[RFC2863] McCloghrie, K. and F. Kastenholz, "The Interfaces Group [RFC2863] McCloghrie, K. and F. Kastenholz, "The Interfaces
MIB", RFC 2863, June 2000. Group MIB", RFC 2863, June 2000.
[RFC3418] Presuhn, R., "Management Information Base (MIB) for the [RFC3418] Presuhn, R., "Management Information Base (MIB) for the
Simple Network Management Protocol (SNMP)", STD 62, RFC Simple Network Management Protocol (SNMP)", STD 62, RFC
3418, December 2002. 3418, December 2002.
[RFCXXXX] Ray, B. and R. Abbi, "Definitions of Managed Objects for [RFC3593] Tesink, K., "Textual Conventions for MIB Modules Using
Very High Speed Digital Subscriber Lines (VDSL)", RFC XXXX, Performance History Based on 15 Minute Intervals", RFC
YYYY 2003. 3593, September 2003.
[RFCXXXX] Ray, B. and R. Abbi, "High Capacity Textual Conventions [RFCXXXX] Ray, B. and R. Abbi, "High Capacity Textual Conventions
for MIB Modules Using Performance History Based on for MIB Modules Using Performance History Based on
15 Minute Intervals", RFC XXXX, YYYY 2003. 15 Minute Intervals", RFC XXXX, YYYY 2003.
[RFCXXXX] Ray, B. and R. Abbi, "Definitions of Managed Objects for
Very High Speed Digital Subscriber Lines (VDSL)",RFC XXXX,
YYYY 2003.
[T1E1311] ANSI T1E1.4/2001-311, "Very-high-bit-rate Digital [T1E1311] ANSI T1E1.4/2001-311, "Very-high-bit-rate Digital
Subscriber Line (VDSL) Metallic Interface, Part 1: Subscriber Line (VDSL) Metallic Interface, Part 1:
Functional Requirements and Common Specification", Functional Requirements and Common Specification",
February 2001. February 2001.
[T1E1011] ANSI T1E1.4/2001-011R3, "VDSL Metallic Interface, Part 2: [T1E1011] ANSI T1E1.4/2001-011R3, "VDSL Metallic Interface, Part
Technical Specification for a Single-Carrier Modulation 2: Technical Specification for a Single-Carrier
(SCM) Transceiver", November 2001. Modulation (SCM) Transceiver", November 2001.
[T1E1013] ANSI T1E1.4/2001-013R4, "VDSL Metallic Interface, Part 3: [T1E1013] ANSI T1E1.4/2001-013R4, "VDSL Metallic Interface, Part
Technical Specification for a Multi-Carrier Modulation 3: Technical Specification for a Multi-Carrier
(MCM) Transceiver", November 2000. Modulation (MCM) Transceiver", November 2000.
7. Informative References 7. Informative References
[RFC2575] Wijnen, B., Presuhn, R. and K. McCloghrie, "View-based [RFC2575] Wijnen, B., Presuhn, R. and K. McCloghrie, "View-based
Access Control Model (VACM) for the Simple Network Access Control Model (VACM) for the Simple Network
Management Protocol (SNMP)", RFC 2575, April 1999. Management Protocol (SNMP)", RFC 2575, April 1999.
[RFC3410] Case, J., Mundy, R., Partain, D. and B. Stewart, [RFC3410] Case, J., Mundy, R., Partain, D. and B. Stewart,
"Introduction and Applicability Statements for Internet- "Introduction and Applicability Statements for Internet-
Standard Management Framework", RFC 3410, December 2002. Standard Management Framework", RFC 3410, December 2002.
skipping to change at page 20, line 46 skipping to change at page 21, line 55
enable cryptographic security. It is then a customer/operator enable cryptographic security. It is then a customer/operator
responsibility to ensure that the SNMP entity giving access to an responsibility to ensure that the SNMP entity giving access to an
instance of a MIB module which utilizes the textual conventions instance of a MIB module which utilizes the textual conventions
defined in this MIB module is properly configured to give access to defined in this MIB module is properly configured to give access to
the objects only to those principals (users) that have legitimate the objects only to those principals (users) that have legitimate
rights to indeed GET or SET (change/create/delete) them. rights to indeed GET or SET (change/create/delete) them.
9. Acknowledgments 9. Acknowledgments
This document contains many definitions taken from This document contains many definitions taken from
draft-ietf-adslmib-vdsl-07.txt. As such any credit for the text draft-ietf-adslmib-vdsl-07.txt. As such, any credit for the text
found within should be full attributed to the authors of that found within should be fully attributed to the authors of that
document. document.
10. Authors' Addresses 10. Authors' Addresses
Menachem Dodge Menachem Dodge
Infineon Technologies Savan Ltd. Infineon Technologies Savan Ltd.
6 Hagavish St. 6 Hagavish St.
Poleg Industrial Area, Poleg Industrial Area,
Netanya 42504, Netanya 42504,
Israel. Israel.
 End of changes. 

This html diff was produced by rfcdiff 1.23, available from http://www.levkowetz.com/ietf/tools/rfcdiff/