draft-ietf-adslmib-vdsl-11.txt   draft-ietf-adslmib-vdsl-12.txt 
Network Working Group B. Ray Network Working Group B. Ray
Category: Internet Draft PESA Switching Systems Category: Internet Draft PESA Switching Systems
R. Abbi R. Abbi
Alcatel Alcatel
September 2003 September 2003
Definitions of Managed Objects for Very High Definitions of Managed Objects for Very High
Speed Digital Subscriber Lines (VDSL) Speed Digital Subscriber Lines (VDSL)
draft-ietf-adslmib-vdsl-11.txt draft-ietf-adslmib-vdsl-12.txt
Status of this Memo Status of this Memo
This document is an Internet-Draft and is in full conformance with This document is an Internet-Draft and is in full conformance with
all provisions of Section 10 of RFC2026. all provisions of Section 10 of RFC2026.
Internet-Drafts are working documents of the Internet Engineering Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF), its areas, and its working groups. Note that Task Force (IETF), its areas, and its working groups. Note that
other groups may also distribute working documents as other groups may also distribute working documents as
Internet-Drafts. Internet-Drafts.
skipping to change at page 2, line 21 skipping to change at page 2, line 21
2.3 Structure ..................................................... 5 2.3 Structure ..................................................... 5
2.4 Counters, Interval Buckets and Thresholds ..................... 6 2.4 Counters, Interval Buckets and Thresholds ..................... 6
2.5 Profiles ...................................................... 7 2.5 Profiles ...................................................... 7
2.6 Notifications ................................................. 8 2.6 Notifications ................................................. 8
2.7 Persistence ................................................... 9 2.7 Persistence ................................................... 9
3. Conformance and Compliance .................................... 10 3. Conformance and Compliance .................................... 10
4. Definitions ................................................... 10 4. Definitions ................................................... 10
5. Intellectual Property ......................................... 64 5. Intellectual Property ......................................... 64
6. Normative References .......................................... 64 6. Normative References .......................................... 64
7. Informative References ........................................ 65 7. Informative References ........................................ 65
8. Security Considerations ....................................... 65 8. Security Considerations ....................................... 66
9. Acknowledgements .............................................. 67 9. Acknowledgements .............................................. 67
10. Authors' Addresses ............................................ 67 10. Authors' Addresses ............................................ 67
11. Full Copyright Statement ...................................... 68 11. Full Copyright Statement ...................................... 68
1. The Internet-Standard Management Framework 1. The Internet-Standard Management Framework
For a detailed overview of the documents that describe the current For a detailed overview of the documents that describe the current
Internet-Standard Management Framework, please refer to section 7 of Internet-Standard Management Framework, please refer to section 7 of
RFC 3410 [RFC3410]. RFC 3410 [RFC3410].
skipping to change at page 7, line 10 skipping to change at page 7, line 10
Seconds (SES), and Unavailable Seconds (UAS) there are event Seconds (SES), and Unavailable Seconds (UAS) there are event
counters, current 15-minute, 0 to 96 15-minute history bucket(s), counters, current 15-minute, 0 to 96 15-minute history bucket(s),
and 0 to 30 1-day history bucket(s) of "interval-counters". Each and 0 to 30 1-day history bucket(s) of "interval-counters". Each
current 15-minute event bucket has an associated threshold current 15-minute event bucket has an associated threshold
notification. notification.
Each of these counters uses the textual conventions defined in the Each of these counters uses the textual conventions defined in the
HC-PerfHist-TC-MIB [RFCXXXX]. The HC-PerfHist-TC-MIB defines 64- HC-PerfHist-TC-MIB [RFCXXXX]. The HC-PerfHist-TC-MIB defines 64-
--- RFC Ed: please replace XXXX with the RFC number assigned to the --- RFC Ed: please replace XXXX with the RFC number assigned to the
--- accompanying HC-TC MIB --- accompanying HC-TC MIB
bit versions of the textual conventions found in RFC 2493 [RFC2493]. bit versions of the textual conventions found in RFC 3593 [RFC3593].
There is no requirement for an agent to ensure a fixed relationship There is no requirement for an agent to ensure a fixed relationship
between the start of a fifteen minute interval and any wall clock; between the start of a fifteen minute interval and any wall clock;
however, some implementations may align the fifteen minute intervals however, some implementations may align the fifteen minute intervals
with quarter hours. Likewise, an implementation may choose to align with quarter hours. Likewise, an implementation may choose to align
one day intervals with the start of a day. one day intervals with the start of a day.
Counters are not reset when a Vtu is reinitialized, only when the Counters are not reset when a Vtu is reinitialized, only when the
agent is reset or reinitialized (or under specific request outside agent is reset or reinitialized (or under specific request outside
the scope of this MIB module). the scope of this MIB module).
skipping to change at page 10, line 8 skipping to change at page 10, line 8
vdslLineConfCustomNotch1Stop vdslLineConfCustomNotch1Stop
vdslLineConfCustomNotch2Start vdslLineConfCustomNotch2Start
vdslLineConfCustomNotch2Stop vdslLineConfCustomNotch2Stop
vdslLineConfDownTargetSlowBurst vdslLineConfDownTargetSlowBurst
vdslLineConfUpTargetSlowBurst vdslLineConfUpTargetSlowBurst
vdslLineConfDownMaxFastFec vdslLineConfDownMaxFastFec
vdslLineConfUpMaxFastFec vdslLineConfUpMaxFastFec
vdslLineConfLineType vdslLineConfLineType
vdslLineConfProfRowStatus vdslLineConfProfRowStatus
vdslLineAlarmConfProfileName vdslLineAlarmConfProfileName
vdslThresh15MinLofs vdslLineAlarmConfThresh15MinLofs
vdslThresh15MinLoss vdslLineAlarmConfThresh15MinLoss
vdslThresh15MinLprs vdslLineAlarmConfThresh15MinLprs
vdslThresh15MinLols vdslLineAlarmConfThresh15MinLols
vdslThresh15MinESs vdslLineAlarmConfThresh15MinESs
vdslThresh15MinSESs vdslLineAlarmConfThresh15MinSESs
vdslThresh15MinUASs vdslLineAlarmConfThresh15MinUASs
vdslInitFailureNotifyEnable vdslLineAlarmConfInitFailure
vdslLineAlarmConfProfRowStatus vdslLineAlarmConfProfRowStatus
It should also be noted that interface indices in this MIB are It should also be noted that interface indices in this MIB are
maintained persistently. VACM data relating to these SHOULD be maintained persistently. VACM data relating to these SHOULD be
stored persistently as well [RFC3415]. stored persistently as well [RFC3415].
3. Conformance and Compliance 3. Conformance and Compliance
For VDSL lines, the following groups are mandatory: For VDSL lines, the following groups are mandatory:
skipping to change at page 11, line 5 skipping to change at page 11, line 5
HCPerfTimeElapsed, HCPerfTimeElapsed,
HCPerfIntervalThreshold, HCPerfIntervalThreshold,
HCPerfCurrentCount, HCPerfCurrentCount,
HCPerfIntervalCount FROM HC-PerfHist-TC-MIB HCPerfIntervalCount FROM HC-PerfHist-TC-MIB
MODULE-COMPLIANCE, MODULE-COMPLIANCE,
OBJECT-GROUP, OBJECT-GROUP,
NOTIFICATION-GROUP FROM SNMPv2-CONF NOTIFICATION-GROUP FROM SNMPv2-CONF
ifIndex FROM IF-MIB ifIndex FROM IF-MIB
SnmpAdminString FROM SNMP-FRAMEWORK-MIB; SnmpAdminString FROM SNMP-FRAMEWORK-MIB;
vdslMIB MODULE-IDENTITY vdslMIB MODULE-IDENTITY
LAST-UPDATED "200309020000Z" -- September 2, 2003 LAST-UPDATED "200309240000Z" -- September 24, 2003
ORGANIZATION "ADSLMIB Working Group" ORGANIZATION "ADSLMIB Working Group"
CONTACT-INFO "WG-email: adslmib@ietf.org CONTACT-INFO "WG-email: adslmib@ietf.org
Info: https://www1.ietf.org/mailman/listinfo/adslmib Info: https://www1.ietf.org/mailman/listinfo/adslmib
Chair: Mike Sneed Chair: Mike Sneed
Sand Channel Systems Sand Channel Systems
Postal: P.O. Box 37324 Postal: P.O. Box 37324
Raleigh, NC 27627-7324 Raleigh, NC 27627-7324
USA USA
Email: sneedmike@hotmail.com Email: sneedmike@hotmail.com
skipping to change at page 12, line 30 skipping to change at page 12, line 30
Min -- Minimum Min -- Minimum
Psd -- Power Spectral Density Psd -- Power Spectral Density
Snr -- Signal to Noise Ratio Snr -- Signal to Noise Ratio
Tx -- Transmit Tx -- Transmit
Blks -- Blocks Blks -- Blocks
Copyright (C) The Internet Society (2003). This version Copyright (C) The Internet Society (2003). This version
of this MIB module is part of RFC XXXX: see the RFC of this MIB module is part of RFC XXXX: see the RFC
itself for full legal notices." itself for full legal notices."
-- RFC Ed.: replace XXXX with assigned number & remove this note -- RFC Ed.: replace XXXX with assigned number & remove this note
REVISION "200309020000Z" -- September 2, 2003 REVISION "200309240000Z" -- September 24, 2003
DESCRIPTION "Initial version, published as RFC XXXX." DESCRIPTION "Initial version, published as RFC XXXX."
-- RFC Ed.: replace XXXX with assigned number & remove this note -- RFC Ed.: replace XXXX with assigned number & remove this note
::= { transmission YYYY } -- To be assigned by IANA ::= { transmission YYYY } -- To be assigned by IANA
-- RFC Ed.: we suggest to put it under { transmission 97 } because -- RFC Ed.: we suggest to put it under { transmission 97 } because
-- 97 is the value of the main ifType for the MIB objects -- 97 is the value of the main ifType for the MIB objects
-- defined in this MIB module. -- defined in this MIB module.
vdslLineMib OBJECT IDENTIFIER ::= { vdslMIB 1 } vdslLineMib OBJECT IDENTIFIER ::= { vdslMIB 1 }
vdslMibObjects OBJECT IDENTIFIER ::= { vdslLineMib 1 } vdslMibObjects OBJECT IDENTIFIER ::= { vdslLineMib 1 }
skipping to change at page 53, line 24 skipping to change at page 53, line 24
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This parameter provisions the VDSL physical entity at "This parameter provisions the VDSL physical entity at
start-up by defining whether and how the line will be start-up by defining whether and how the line will be
channelized, i.e. which channel type(s) are supported. channelized, i.e. which channel type(s) are supported.
If the line is to be channelized, the value will be other If the line is to be channelized, the value will be other
than noChannel(1). than noChannel(1).
This configuration can be activated only during start-up. This configuration can be activated only during start-up.
Afterwards, the value of vdslLineType coincides with the Afterwards, the value of vdslLineType coincides with the
value of vdslLineConfLineType. Depending on this vlaue, value of vdslLineConfLineType. Depending on this value,
the corresponding entries in the ifTable for the the corresponding entries in the ifTable for the
interleaved and the fast channels are enabled or disabled interleaved and the fast channels are enabled or disabled
according to the value of their ifOperStatus. according to the value of their ifOperStatus.
Defined values are: Defined values are:
noChannel(1) -- no channels exist noChannel(1) -- no channels exist
fastOnly(2) -- only fast channel exists fastOnly(2) -- only fast channel exists
interleavedOnly(3) -- only interleaved channel exists interleavedOnly(3) -- only interleaved channel exists
fastOrInterleaved(4) -- either fast or interleaved channel fastOrInterleaved(4) -- either fast or interleaved channel
skipping to change at page 54, line 5 skipping to change at page 53, line 56
SYNTAX RowStatus SYNTAX RowStatus
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object is used to create a new row or modify or "This object is used to create a new row or modify or
delete an existing row in this table. delete an existing row in this table.
A profile activated by setting this object to 'active'. A profile activated by setting this object to 'active'.
When 'active' is set, the system will validate the profile. When 'active' is set, the system will validate the profile.
Before a profile can be deleted or taken out of service, Before a profile can be deleted or taken out of service
(by setting this object to 'destroy' or 'outOfService') (by setting this object to 'destroy' or 'outOfService'),
it must be first unreferenced from all associated lines." it must be first unreferenced from all associated lines.
An 'active' profile may be modified at any time. Note
that some changes may require that any referenced lines be
restarted (e.g. vdslLineConfLineType)."
::= { vdslLineConfProfileEntry 46 } ::= { vdslLineConfProfileEntry 46 }
-- --
-- Alarm configuration profile table -- Alarm configuration profile table
-- --
vdslLineAlarmConfProfileTable OBJECT-TYPE vdslLineAlarmConfProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF VdslLineAlarmConfProfileEntry SYNTAX SEQUENCE OF VdslLineAlarmConfProfileEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
skipping to change at page 54, line 48 skipping to change at page 54, line 50
always exist and its parameters will be set to vendor always exist and its parameters will be set to vendor
specific values, unless otherwise specified in this specific values, unless otherwise specified in this
document." document."
INDEX { vdslLineAlarmConfProfileName } INDEX { vdslLineAlarmConfProfileName }
::= { vdslLineAlarmConfProfileTable 1 } ::= { vdslLineAlarmConfProfileTable 1 }
VdslLineAlarmConfProfileEntry ::= VdslLineAlarmConfProfileEntry ::=
SEQUENCE SEQUENCE
{ {
vdslLineAlarmConfProfileName SnmpAdminString, vdslLineAlarmConfProfileName SnmpAdminString,
vdslThresh15MinLofs HCPerfIntervalThreshold, vdslLineAlarmConfThresh15MinLofs HCPerfIntervalThreshold,
vdslThresh15MinLoss HCPerfIntervalThreshold, vdslLineAlarmConfThresh15MinLoss HCPerfIntervalThreshold,
vdslThresh15MinLprs HCPerfIntervalThreshold, vdslLineAlarmConfThresh15MinLprs HCPerfIntervalThreshold,
vdslThresh15MinLols HCPerfIntervalThreshold, vdslLineAlarmConfThresh15MinLols HCPerfIntervalThreshold,
vdslThresh15MinESs HCPerfIntervalThreshold, vdslLineAlarmConfThresh15MinESs HCPerfIntervalThreshold,
vdslThresh15MinSESs HCPerfIntervalThreshold, vdslLineAlarmConfThresh15MinSESs HCPerfIntervalThreshold,
vdslThresh15MinUASs HCPerfIntervalThreshold, vdslLineAlarmConfThresh15MinUASs HCPerfIntervalThreshold,
vdslInitFailureNotifyEnable TruthValue, vdslLineAlarmConfInitFailure TruthValue,
vdslLineAlarmConfProfRowStatus RowStatus vdslLineAlarmConfProfRowStatus RowStatus
} }
vdslLineAlarmConfProfileName OBJECT-TYPE vdslLineAlarmConfProfileName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (1..32)) SYNTAX SnmpAdminString (SIZE (1..32))
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The name for this profile as specified by an "The name for this profile as specified by an
adminstrator." adminstrator."
::= { vdslLineAlarmConfProfileEntry 1 } ::= { vdslLineAlarmConfProfileEntry 1 }
vdslThresh15MinLofs OBJECT-TYPE vdslLineAlarmConfThresh15MinLofs OBJECT-TYPE
SYNTAX HCPerfIntervalThreshold SYNTAX HCPerfIntervalThreshold
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object configures the threshold for the number of "This object configures the threshold for the number of
loss of frame seconds (lofs) within any given 15-minute loss of frame seconds (lofs) within any given 15-minute
performance data collection interval. If the value of performance data collection interval. If the value of
loss of frame seconds in a particular 15-minute collection loss of frame seconds in a particular 15-minute collection
interval reaches/exceeds this value, a interval reaches/exceeds this value, a
vdslPerfLofsThreshNotification notification will be vdslPerfLofsThreshNotification notification will be
generated. No more than one notification will be sent generated. No more than one notification will be sent
per interval." per interval."
DEFVAL { 0 } DEFVAL { 0 }
::= { vdslLineAlarmConfProfileEntry 2 } ::= { vdslLineAlarmConfProfileEntry 2 }
vdslThresh15MinLoss OBJECT-TYPE vdslLineAlarmConfThresh15MinLoss OBJECT-TYPE
SYNTAX HCPerfIntervalThreshold SYNTAX HCPerfIntervalThreshold
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object configures the threshold for the number of "This object configures the threshold for the number of
loss of signal seconds (loss) within any given 15-minute loss of signal seconds (loss) within any given 15-minute
performance data collection interval. If the value of performance data collection interval. If the value of
loss of signal seconds in a particular 15-minute loss of signal seconds in a particular 15-minute
collection interval reaches/exceeds this value, a collection interval reaches/exceeds this value, a
vdslPerfLossThreshNotification notification will be vdslPerfLossThreshNotification notification will be
generated. One notification will be sent per interval generated. One notification will be sent per interval
per endpoint." per endpoint."
DEFVAL { 0 } DEFVAL { 0 }
::= { vdslLineAlarmConfProfileEntry 3 } ::= { vdslLineAlarmConfProfileEntry 3 }
vdslThresh15MinLprs OBJECT-TYPE vdslLineAlarmConfThresh15MinLprs OBJECT-TYPE
SYNTAX HCPerfIntervalThreshold SYNTAX HCPerfIntervalThreshold
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object configures the threshold for the number of "This object configures the threshold for the number of
loss of power seconds (lprs) within any given 15-minute loss of power seconds (lprs) within any given 15-minute
performance data collection interval. If the value of performance data collection interval. If the value of
loss of power seconds in a particular 15-minute collection loss of power seconds in a particular 15-minute collection
interval reaches/exceeds this value, a interval reaches/exceeds this value, a
vdslPerfLprsThreshNotification notification will be vdslPerfLprsThreshNotification notification will be
generated. No more than one notification will be sent generated. No more than one notification will be sent
per interval." per interval."
DEFVAL { 0 } DEFVAL { 0 }
::= { vdslLineAlarmConfProfileEntry 4 } ::= { vdslLineAlarmConfProfileEntry 4 }
vdslThresh15MinLols OBJECT-TYPE vdslLineAlarmConfThresh15MinLols OBJECT-TYPE
SYNTAX HCPerfIntervalThreshold SYNTAX HCPerfIntervalThreshold
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object configures the threshold for the number of "This object configures the threshold for the number of
loss of link seconds (lols) within any given 15-minute loss of link seconds (lols) within any given 15-minute
performance data collection interval. If the value of performance data collection interval. If the value of
loss of power seconds in a particular 15-minute collection loss of power seconds in a particular 15-minute collection
interval reaches/exceeds this value, a interval reaches/exceeds this value, a
vdslPerfLolsThreshNotification notification will be vdslPerfLolsThreshNotification notification will be
generated. No more than one notification will be sent generated. No more than one notification will be sent
per interval." per interval."
DEFVAL { 0 } DEFVAL { 0 }
::= { vdslLineAlarmConfProfileEntry 5 } ::= { vdslLineAlarmConfProfileEntry 5 }
vdslThresh15MinESs OBJECT-TYPE vdslLineAlarmConfThresh15MinESs OBJECT-TYPE
SYNTAX HCPerfIntervalThreshold SYNTAX HCPerfIntervalThreshold
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object configures the threshold for the number of "This object configures the threshold for the number of
errored seconds (ESs) within any given 15-minute errored seconds (ESs) within any given 15-minute
performance data collection interval. If the value of performance data collection interval. If the value of
errored seconds in a particular 15-minute collection errored seconds in a particular 15-minute collection
interval reaches/exceeds this value, a interval reaches/exceeds this value, a
vdslPerfESsThreshNotification notification will be vdslPerfESsThreshNotification notification will be
generated. No more than one notification will be sent generated. No more than one notification will be sent
per interval." per interval."
DEFVAL { 0 } DEFVAL { 0 }
::= { vdslLineAlarmConfProfileEntry 6 } ::= { vdslLineAlarmConfProfileEntry 6 }
vdslThresh15MinSESs OBJECT-TYPE vdslLineAlarmConfThresh15MinSESs OBJECT-TYPE
SYNTAX HCPerfIntervalThreshold SYNTAX HCPerfIntervalThreshold
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object configures the threshold for the number of "This object configures the threshold for the number of
severely errored seconds (SESs) within any given 15-minute severely errored seconds (SESs) within any given 15-minute
performance data collection interval. If the value of performance data collection interval. If the value of
severely errored seconds in a particular 15-minute severely errored seconds in a particular 15-minute
collection interval reaches/exceeds this value, a collection interval reaches/exceeds this value, a
vdslPerfSESsThreshNotification notification will be vdslPerfSESsThreshNotification notification will be
generated. No more than one notification will be sent generated. No more than one notification will be sent
per interval." per interval."
DEFVAL { 0 } DEFVAL { 0 }
::= { vdslLineAlarmConfProfileEntry 7 } ::= { vdslLineAlarmConfProfileEntry 7 }
vdslThresh15MinUASs OBJECT-TYPE vdslLineAlarmConfThresh15MinUASs OBJECT-TYPE
SYNTAX HCPerfIntervalThreshold SYNTAX HCPerfIntervalThreshold
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object configures the threshold for the number of "This object configures the threshold for the number of
unavailable seconds (UASs) within any given 15-minute unavailable seconds (UASs) within any given 15-minute
performance data collection interval. If the value of performance data collection interval. If the value of
unavailable seconds in a particular 15-minute collection unavailable seconds in a particular 15-minute collection
interval reaches/exceeds this value, a interval reaches/exceeds this value, a
vdslPerfUASsThreshNotification notification will be vdslPerfUASsThreshNotification notification will be
generated. No more than one notification will be sent generated. No more than one notification will be sent
per interval." per interval."
DEFVAL { 0 } DEFVAL { 0 }
::= { vdslLineAlarmConfProfileEntry 8 } ::= { vdslLineAlarmConfProfileEntry 8 }
vdslInitFailureNotifyEnable OBJECT-TYPE vdslLineAlarmConfInitFailure OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object specifies if a vdslInitFailureNotification "This object specifies if a vdslInitFailureNotification
notification will be generated if an initialization notification will be generated if an initialization
failure occurs." failure occurs."
DEFVAL { false } DEFVAL { false }
::= { vdslLineAlarmConfProfileEntry 9 } ::= { vdslLineAlarmConfProfileEntry 9 }
skipping to change at page 57, line 51 skipping to change at page 57, line 54
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object is used to create a new row or modify or "This object is used to create a new row or modify or
delete an existing row in this table. delete an existing row in this table.
A profile activated by setting this object to 'active'. A profile activated by setting this object to 'active'.
When 'active' is set, the system will validate the profile. When 'active' is set, the system will validate the profile.
Before a profile can be deleted or taken out of service, Before a profile can be deleted or taken out of service,
(by setting this object to 'destroy' or 'outOfService') it (by setting this object to 'destroy' or 'outOfService') it
must be first unreferenced from all associated lines." must be first unreferenced from all associated lines.
An 'active' profile may be modified at any time."
::= { vdslLineAlarmConfProfileEntry 10 } ::= { vdslLineAlarmConfProfileEntry 10 }
-- Notification definitions -- Notification definitions
vdslNotifications OBJECT IDENTIFIER ::= { vdslLineMib 0 } vdslNotifications OBJECT IDENTIFIER ::= { vdslLineMib 0 }
vdslPerfLofsThreshNotification NOTIFICATION-TYPE vdslPerfLofsThreshNotification NOTIFICATION-TYPE
OBJECTS { OBJECTS {
vdslPerfDataCurr15MinLofs vdslPerfDataCurr15MinLofs
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Loss of Framing 15-minute interval threshold "Loss of Framing 15-minute interval threshold
(vdslThresh15MinLofs) reached." (vdslLineAlarmConfThresh15MinLofs) reached."
::= { vdslNotifications 1 } ::= { vdslNotifications 1 }
vdslPerfLossThreshNotification NOTIFICATION-TYPE vdslPerfLossThreshNotification NOTIFICATION-TYPE
OBJECTS { OBJECTS {
vdslPerfDataCurr15MinLoss vdslPerfDataCurr15MinLoss
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Loss of Signal 15-minute interval threshold "Loss of Signal 15-minute interval threshold
(vdslThresh15MinLoss) reached." (vdslLineAlarmConfThresh15MinLoss) reached."
::= { vdslNotifications 2 } ::= { vdslNotifications 2 }
vdslPerfLprsThreshNotification NOTIFICATION-TYPE vdslPerfLprsThreshNotification NOTIFICATION-TYPE
OBJECTS { OBJECTS {
vdslPerfDataCurr15MinLprs vdslPerfDataCurr15MinLprs
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Loss of Power 15-minute interval threshold "Loss of Power 15-minute interval threshold
(vdslThresh15MinLprs) reached." (vdslLineAlarmConfThresh15MinLprs) reached."
::= { vdslNotifications 3 } ::= { vdslNotifications 3 }
vdslPerfLolsThreshNotification NOTIFICATION-TYPE vdslPerfLolsThreshNotification NOTIFICATION-TYPE
OBJECTS { OBJECTS {
vdslPerfDataCurr15MinLols vdslPerfDataCurr15MinLols
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Loss of Link 15-minute interval threshold "Loss of Link 15-minute interval threshold
(vdslThresh15MinLols) reached." (vdslLineAlarmConfThresh15MinLols) reached."
::= { vdslNotifications 4 } ::= { vdslNotifications 4 }
vdslPerfESsThreshNotification NOTIFICATION-TYPE vdslPerfESsThreshNotification NOTIFICATION-TYPE
OBJECTS { OBJECTS {
vdslPerfDataCurr15MinESs vdslPerfDataCurr15MinESs
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Errored Seconds 15-minute interval threshold "Errored Seconds 15-minute interval threshold
(vdslThresh15MinESs) reached." (vdslLineAlarmConfThresh15MinESs) reached."
::= { vdslNotifications 5 } ::= { vdslNotifications 5 }
vdslPerfSESsThreshNotification NOTIFICATION-TYPE vdslPerfSESsThreshNotification NOTIFICATION-TYPE
OBJECTS { OBJECTS {
vdslPerfDataCurr15MinSESs vdslPerfDataCurr15MinSESs
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Severely Errored Seconds 15-minute interval threshold "Severely Errored Seconds 15-minute interval threshold
(vdslThresh15MinSESs) reached." (vdslLineAlarmConfThresh15MinSESs) reached."
::= { vdslNotifications 6 } ::= { vdslNotifications 6 }
vdslPerfUASsThreshNotification NOTIFICATION-TYPE vdslPerfUASsThreshNotification NOTIFICATION-TYPE
OBJECTS { OBJECTS {
vdslPerfDataCurr15MinUASs vdslPerfDataCurr15MinUASs
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Unavailable Seconds 15-minute interval threshold "Unavailable Seconds 15-minute interval threshold
(vdslThresh15MinUASs) reached." (vdslLineAlarmConfThresh15MinUASs) reached."
::= { vdslNotifications 7 } ::= { vdslNotifications 7 }
vdslDownMaxSnrMgnNotification NOTIFICATION-TYPE vdslDownMaxSnrMgnNotification NOTIFICATION-TYPE
OBJECTS { OBJECTS {
vdslPhysCurrSnrMgn vdslPhysCurrSnrMgn
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The downstream Signal to Noise Margin exceeded "The downstream Signal to Noise Margin exceeded
vdslLineConfDownMaxSnrMgn. The object vdslLineConfDownMaxSnrMgn. The object
skipping to change at page 63, line 20 skipping to change at page 63, line 25
vdslLineConfCustomNotch1Start, vdslLineConfCustomNotch1Start,
vdslLineConfCustomNotch1Stop, vdslLineConfCustomNotch1Stop,
vdslLineConfCustomNotch2Start, vdslLineConfCustomNotch2Start,
vdslLineConfCustomNotch2Stop, vdslLineConfCustomNotch2Stop,
vdslLineConfDownTargetSlowBurst, vdslLineConfDownTargetSlowBurst,
vdslLineConfUpTargetSlowBurst, vdslLineConfUpTargetSlowBurst,
vdslLineConfDownMaxFastFec, vdslLineConfDownMaxFastFec,
vdslLineConfUpMaxFastFec, vdslLineConfUpMaxFastFec,
vdslLineConfLineType, vdslLineConfLineType,
vdslLineConfProfRowStatus, vdslLineConfProfRowStatus,
vdslThresh15MinLofs, vdslLineAlarmConfThresh15MinLofs,
vdslThresh15MinLoss, vdslLineAlarmConfThresh15MinLoss,
vdslThresh15MinLprs, vdslLineAlarmConfThresh15MinLprs,
vdslThresh15MinLols, vdslLineAlarmConfThresh15MinLols,
vdslThresh15MinESs, vdslLineAlarmConfThresh15MinESs,
vdslThresh15MinSESs, vdslLineAlarmConfThresh15MinSESs,
vdslThresh15MinUASs, vdslLineAlarmConfThresh15MinUASs,
vdslInitFailureNotifyEnable, vdslLineAlarmConfInitFailure,
vdslLineAlarmConfProfRowStatus vdslLineAlarmConfProfRowStatus
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A collection of objects providing information about "A collection of objects providing information about
a VDSL Line." a VDSL Line."
::= { vdslGroups 1 } ::= { vdslGroups 1 }
vdslNotificationGroup NOTIFICATION-GROUP vdslNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS NOTIFICATIONS
skipping to change at page 64, line 52 skipping to change at page 65, line 5
[ITU9931] ITU-T G.993.1 "Very-high-speed digital subscriber line [ITU9931] ITU-T G.993.1 "Very-high-speed digital subscriber line
foundation", November 2001. foundation", November 2001.
[ITU9971] ITU-T G.997.1 "Physical layer management for Digital [ITU9971] ITU-T G.997.1 "Physical layer management for Digital
Subscriber Line (DSL) Transceivers", July 1999. Subscriber Line (DSL) Transceivers", July 1999.
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119, March 1997. Requirement Levels", BCP 14, RFC 2119, March 1997.
[RFC2493] Tesink, K., "Textual Conventions for MIB Modules Using
Performance History Based on 15 Minute Intervals", RFC
2493, January 1999.
[RFC2578] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, [RFC2578] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case,
J., Rose, M. and S. Waldbusser, "Structure of J., Rose, M. and S. Waldbusser, "Structure of
Management Information Version 2 (SMIv2)", STD 58, RFC Management Information Version 2 (SMIv2)", STD 58, RFC
2578, April 1999. 2578, April 1999.
[RFC2579] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, [RFC2579] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case,
J., Rose, M. and S. Waldbusser, "Textual Conventions J., Rose, M. and S. Waldbusser, "Textual Conventions
for SMIv2", STD 58, RFC 2579, April 1999. for SMIv2", STD 58, RFC 2579, April 1999.
[RFC2580] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, [RFC2580] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case,
J., Rose, M. and S. Waldbusser, "Conformance J., Rose, M. and S. Waldbusser, "Conformance
Statements for SMIv2", STD 58, RFC 2580, April 1999. Statements for SMIv2", STD 58, RFC 2580, April 1999.
[RFC2863] McCloghrie, K. and F. Kastenholz, "The Interfaces [RFC2863] McCloghrie, K. and F. Kastenholz, "The Interfaces
Group MIB", RFC 2863, June 2000. Group MIB", RFC 2863, June 2000.
[RFC3418] Presuhn, R., "Management Information Base (MIB) for the [RFC3418] Presuhn, R., "Management Information Base (MIB) for the
Simple Network Management Protocol (SNMP)", STD 62, RFC Simple Network Management Protocol (SNMP)", STD 62, RFC
3418, December 2002. 3418, December 2002.
[RFC3593] Tesink, K., "Textual Conventions for MIB Modules Using
Performance History Based on 15 Minute Intervals", RFC
3593, September 2003.
[RFCXXXX] Ray, B. and R. Abbi, "High Capacity Textual Conventions [RFCXXXX] Ray, B. and R. Abbi, "High Capacity Textual Conventions
for MIB Modules Using Performance History Based on for MIB Modules Using Performance History Based on
15 Minute Intervals", RFC XXXX, YYYY 2003. 15 Minute Intervals", RFC XXXX, YYYY 2003.
--- RFC Ed: please replace XXXX with the RFC number assigned to the --- RFC Ed: please replace XXXX with the RFC number assigned to the
--- accompanying HC-TC MIB and YYYY with the appropriate month. --- accompanying HC-TC MIB and YYYY with the appropriate month.
[T1E1311] ANSI T1E1.4/2001-311, "Very-high-bit-rate Digital [T1E1311] ANSI T1E1.4/2001-311, "Very-high-bit-rate Digital
Subscriber Line (VDSL) Metallic Interface, Part 1: Subscriber Line (VDSL) Metallic Interface, Part 1:
Functional Requirements and Common Specification", Functional Requirements and Common Specification",
 End of changes. 

This html diff was produced by rfcdiff 1.23, available from http://www.levkowetz.com/ietf/tools/rfcdiff/