draft-ietf-adslmib-vdsl2-00.txt   draft-ietf-adslmib-vdsl2-01.txt 
Network Working Group M. Morgenstern Network Working Group M. Morgenstern
Internet-Draft ECI Telecom Ltd. Internet-Draft ECI Telecom Ltd.
Expires: July 5, 2006 S. Baillie Intended status: Standards Track S. Baillie
U. Bonollo Expires: August 5, 2006 U. Bonollo
NEC Australia NEC Australia
January 2006 February 2006
Definitions of Managed Objects for Very High Speed Digital Subscriber Definitions of Managed Objects for Very High Speed Digital Subscriber
Line 2 (VDSL2) Line 2 (VDSL2)
draft-ietf-adslmib-vdsl2-00.txt draft-ietf-adslmib-vdsl2-01.txt
Status of this Memo Status of this Memo
By submitting this Internet-Draft, each author represents that any By submitting this Internet-Draft, each author represents that any
applicable patent or other IPR claims of which he or she is aware applicable patent or other IPR claims of which he or she is aware
have been or will be disclosed, and any of which he or she becomes have been or will be disclosed, and any of which he or she becomes
aware will be disclosed, in accordance with Section 6 of BCP 79. aware will be disclosed, in accordance with Section 6 of BCP 79.
Internet-Drafts are working documents of the Internet Engineering Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF), its areas, and its working groups. Note that Task Force (IETF), its areas, and its working groups. Note that
skipping to change at page 1, line 37 skipping to change at page 1, line 37
and may be updated, replaced, or obsoleted by other documents at any and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress." material or to cite them other than as "work in progress."
The list of current Internet-Drafts can be accessed at The list of current Internet-Drafts can be accessed at
http://www.ietf.org/ietf/1id-abstracts.txt. http://www.ietf.org/ietf/1id-abstracts.txt.
The list of Internet-Draft Shadow Directories can be accessed at The list of Internet-Draft Shadow Directories can be accessed at
http://www.ietf.org/shadow.html. http://www.ietf.org/shadow.html.
This Internet-Draft will expire on July 5, 2006. This Internet-Draft will expire on August 5, 2006.
Copyright Notice Copyright Notice
Copyright (C) The Internet Society (2006). Copyright (C) The Internet Society (2006).
Abstract Abstract
This document defines a Management Information Base (MIB) module for This document defines a Management Information Base (MIB) module for
use with network management protocols in the Internet community. In use with network management protocols in the Internet community. In
particular, it describes objects used for managing parameters of the particular, it describes objects used for managing parameters of the
skipping to change at page 2, line 13 skipping to change at page 2, line 13
which are also applicable for managing ADSL, ADSL2, and ADSL2+ which are also applicable for managing ADSL, ADSL2, and ADSL2+
interfaces. interfaces.
Table of Contents Table of Contents
1. The Internet-Standard Management Framework . . . . . . . . . 3 1. The Internet-Standard Management Framework . . . . . . . . . 3
2. Overview . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2. Overview . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2.1. Relationship to other MIBs . . . . . . . . . . . . . . . 4 2.1. Relationship to other MIBs . . . . . . . . . . . . . . . 4
2.2. IANA Considerations . . . . . . . . . . . . . . . . . . . 6 2.2. IANA Considerations . . . . . . . . . . . . . . . . . . . 6
2.3. Conventions Used in the MIB Module . . . . . . . . . . . 7 2.3. Conventions Used in the MIB Module . . . . . . . . . . . 7
2.4. Structure . . . . . . . . . . . . . . . . . . . . . . . . 13 2.4. Structure . . . . . . . . . . . . . . . . . . . . . . . . 14
2.5. Persistence . . . . . . . . . . . . . . . . . . . . . . . 16 2.5. Persistence . . . . . . . . . . . . . . . . . . . . . . . 17
2.6. Line Topology . . . . . . . . . . . . . . . . . . . . . . 18 2.6. Line Topology . . . . . . . . . . . . . . . . . . . . . . 19
2.7. Counters, Interval Buckets, and Thresholds . . . . . . . 19 2.7. Counters, Interval Buckets, and Thresholds . . . . . . . 20
2.8. Profiles . . . . . . . . . . . . . . . . . . . . . . . . 21 2.8. Profiles . . . . . . . . . . . . . . . . . . . . . . . . 22
2.9. Notifications . . . . . . . . . . . . . . . . . . . . . . 25 2.9. Notifications . . . . . . . . . . . . . . . . . . . . . . 26
3. Definitions . . . . . . . . . . . . . . . . . . . . . . . . . 26 3. Definitions . . . . . . . . . . . . . . . . . . . . . . . . . 27
4. Implementation Analysis . . . . . . . . . . . . . . . . . . . 153 4. Implementation Analysis . . . . . . . . . . . . . . . . . . . 169
5. Security Considerations . . . . . . . . . . . . . . . . . . . 153 5. Security Considerations . . . . . . . . . . . . . . . . . . . 169
6. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . 160 6. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . 176
7. References . . . . . . . . . . . . . . . . . . . . . . . . . 161 7. References . . . . . . . . . . . . . . . . . . . . . . . . . 177
7.1. Normative References . . . . . . . . . . . . . . . . . . 161 7.1. Normative References . . . . . . . . . . . . . . . . . . 177
7.2. Informative References . . . . . . . . . . . . . . . . . 162 7.2. Informative References . . . . . . . . . . . . . . . . . 178
Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 163 Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 178
Intellectual Property and Copyright Statements . . . . . . . . . 164 Intellectual Property and Copyright Statements . . . . . . . . . 180
1. The Internet-Standard Management Framework 1. The Internet-Standard Management Framework
For a detailed overview of the documents that describe the current For a detailed overview of the documents that describe the current
Internet-Standard Management Framework, please refer to Section 7 of Internet-Standard Management Framework, please refer to Section 7 of
RFC 3410 [RFC3410]. RFC 3410 [RFC3410].
Managed objects are accessed via a virtual information store, termed Managed objects are accessed via a virtual information store, termed
the Management Information Base or MIB. MIB objects are generally the Management Information Base or MIB. MIB objects are generally
accessed through the Simple Network Management Protocol (SNMP). accessed through the Simple Network Management Protocol (SNMP).
skipping to change at page 8, line 27 skipping to change at page 8, line 27
transmission modes in the list. transmission modes in the list.
o Xdsl2RaMode: o Xdsl2RaMode:
Attributes with this syntax reference if and how Rate-Adaptive Attributes with this syntax reference if and how Rate-Adaptive
synchronization is being used on the respective VDSL2/ADSL/ADSL2 synchronization is being used on the respective VDSL2/ADSL/ADSL2
or ADSL2+ link: or ADSL2+ link:
manual (1) - No Rate-Adaptation. The initialization process manual (1) - No Rate-Adaptation. The initialization process
attempts to synchronize to a specified rate. attempts to synchronize to a specified rate.
rainit (2) - Rate-Adaptation during initialization process raInit (2) - Rate-Adaptation during initialization process
only, which attempts to synchronize to a rate only, which attempts to synchronize to a rate
between minimum and maximum specified values. between minimum and maximum specified values.
dynamicRa (3) - Dynamic Rate-Adaptation during initialization dynamicRa (3) - Dynamic Rate-Adaptation during initialization
process as well as during SHOWTIME. process as well as during SHOWTIME.
o Xdsl2InitResult: o Xdsl2InitResult:
Attributes with this syntax reference the recent result of a full Attributes with this syntax reference the recent result of a full
initialization attempt: initialization attempt:
noFail (0) - Successful initialization noFail (0) - Successful initialization
configError (1) - Configuration failure configError (1) - Configuration failure
configNotFeasible (2) - Configuration details not supported configNotFeasible (2) - Configuration details not supported
commFail (3) - Communication failure commFail (3) - Communication failure
noPeerAtu (4) - Peer ATU not detected noPeerAtu (4) - Peer ATU not detected
otherCause (5) - Other initialization failure reason otherCause (5) - Other initialization failure reason
o Xdsl2OperationModes: o Xdsl2OperationModes:
Attributes with this syntax uniquely identify an XDSL mode, which Attributes with this syntax uniquely identify an ADSL mode, which
is a category associated with each transmission mode defined for is a category associated with each transmission mode defined for
the VDSL2/ADSL/ADSL2 or ADSL2+ link. Part of the line the VDSL2/ADSL/ADSL2 or ADSL2+ link. Part of the line
configuration profile depends on the XDSL Mode: configuration profile depends on the ADSL Mode:
------*****************************************************
----- The following list will be changed. Instead of the
----- the current list we'll add a list that follows the xTSE
------*****************************************************
defMode (1), - The default/generic PSD configuration. Specified as an enumeration construct, there are currently a few
The default configuration will be used dozen transmission modes in the list.
when no other matching mode specific
configuration can be found.
adsl (2), - ADSL (POTS or ISDN)
adsl2Pots (3), - ADSL2 (ISDN)
adsl2Isdn (4), - ADSL2 (ISDN)
adsl2PlusPots (5), - ADSL2+ (POTS)
adsl2PlusIsdn (6), - ADSL2+ (ISDN)
adsl2ReachExtended (7)- Reach Extended ADSL2
o Xdsl2PowerMngState: o Xdsl2PowerMngState:
Attributes with this syntax uniquely identify each power Attributes with this syntax uniquely identify each power
management state defined for the VDSL2/ADSL/ADSL2 or ADSL2+ link. management state defined for the VDSL2/ADSL/ADSL2 or ADSL2+ link.
For VDSL2 links only L0 and L3 states are supported: For VDSL2 links only L0 and L3 states are supported:
l0(1) - L0 - Full power management state l0(1) - L0 - Full power management state
l1(2) - L1 - Low power management state (for G.992.2) l1(2) - L1 - Low power management state (for G.992.2)
l2(3) - L2 - Low power management state (for G.992.3, l2(3) - L2 - Low power management state (for G.992.3,
skipping to change at page 9, line 47 skipping to change at page 9, line 34
ADSL2 or ADSL2+ link. For VDSL2 links only L0 and L3 states are ADSL2 or ADSL2+ link. For VDSL2 links only L0 and L3 states are
supported: supported:
l3toL0 (0) - Perform a transition from L3 to L0 (Full l3toL0 (0) - Perform a transition from L3 to L0 (Full
power management state) power management state)
l0toL2 (2) - Perform a transition from L0 to L2 (Low l0toL2 (2) - Perform a transition from L0 to L2 (Low
power management state) power management state)
l0orL2toL3 (3) - Perform a transition into L3 (Idle power l0orL2toL3 (3) - Perform a transition into L3 (Idle power
management state) management state)
o Xdsl2LConfProfPmMode: o Xdsl2LinePmMode:
Attributes with this syntax are configuration parameters that Attributes with this syntax are configuration parameters that
reference the power modes/states into which the xTU-C or xTU-R may reference the power modes/states into which the xTU-C or xTU-R may
autonomously transit. autonomously transit.
This is a BITS structure that allows control of the following This is a BITS structure that allows control of the following
transit options: transit options:
allowTransitionsToIdle (0) - xTU may autonomously transit allowTransitionsToIdle (0) - xTU may autonomously transit
to idle (L3) state. to idle (L3) state.
skipping to change at page 11, line 5 skipping to change at page 10, line 38
line. line.
adminUp (9) - The NE cannot initiate the command because adminUp (9) - The NE cannot initiate the command because
the relevant line is administratively the relevant line is administratively
'Up'. 'Up'.
tableFull (10) - The NE cannot initiate the command, due tableFull (10) - The NE cannot initiate the command, due
to reaching the maximum number of rows to reaching the maximum number of rows
in the results table. in the results table.
noResources (11) - The NE cannot initiate the command, due noResources (11) - The NE cannot initiate the command, due
to lack of internal memory resources. to lack of internal memory resources.
o Xdsl2LineProfiles:
Attributes with this syntax reference the list of supported,
enabled or active ITU-T G.993.2 implementation profiles. This is
a BITS structure with the following values:
profile8a (0) - Profile 8a
profile8b (1) - Profile 8b
profile8c (2) - Profile 8c
profile8d (3) - Profile 8d
profile12a (4) - Profile 12a
profile12b (5) - Profile 12b
profile17a (6) - Profile 17a
profile30a (7) - Profile 30a
o Xdsl2LineClassMask:
Attributes with this syntax are configuration parameters that
specify the VDSL2 PSD Mask Class for a selected VDSL2 transmission
mode. The following classes are defined:
none (1) - VDSL2 PSD Mask Class is unknown/irrelevant.
a998ORb997M1cORc998 (2) - For ITU-T G.993.2 Annex A and C this
is the only applicable PSD class.
ITU-T G.993.2 Annex B: 997-M1c-A-7
b997M1x (3) - ITU-T G.993.2 Annex B: 997-M1x-M-8 or 997-M1x-M
b997M2x (4) - ITU-T G.993.2 Annex B: 998-M1x-A, 998-M1x-B,
or 997-M2x-M
b998M1x (5) - ITU-T G.993.2 Annex B: 997-M2x-M-8, 997-M2x-A,
or 998-M1x-NUS0
b998M2x (6) - ITU-T G.993.2 Annex B: 998-M2x-A, 998-M2x-M,
998-M2x-B, or 998-M2x-NUS0
o Xdsl2LineLimitMask:
Attributes with this syntax are configuration parameters that
specify the VDSL2 PSD Limit Mask for each PSD Mask Class and
implementation profile. The VDSL2 implementation profiles are
grouped into 4 classes and each is allocated 16 PSD Limit Mask
values in this textual convention.
o Xdsl2LineUs0Disable:
Attributes with this syntax are configuration parameters that
indicate if US0 is disabled for each limit PSD mask. The VDSL2
implementation profiles are grouped into 4 classes and each is
allocated 16 values in this textual convention.
o Xdsl2LineUs0Mask:
Attributes with this syntax are configuration parameters for ITU-T
G.993.2 Annex A transmission mode that specify the US0 PSD masks
to be allowed by the near-end xTU on the line. It is a bit map
that supports 18 possible US0 masks.
o Xdsl2SymbolProtection: o Xdsl2SymbolProtection:
Attributes with this syntax are configuration parameters that Attributes with this syntax are configuration parameters that
reference the minimum length impulse noise protection (INP) in reference the minimum length impulse noise protection (INP) in
terms of number of symbols: terms of number of symbols:
noProtection (1) - INP not required noProtection (1) - INP not required
halfSymbol (2) - INP length = 1/2 symbol halfSymbol (2) - INP length = 1/2 symbol
singleSymbol (3) - INP length = 1 symbol singleSymbol (3) - INP length = 1 symbol
twoSymbols (4) - INP length = 2 symbols twoSymbols (4) - INP length = 2 symbols
skipping to change at page 12, line 5 skipping to change at page 12, line 45
Attributes with this syntax are configuration parameters that Attributes with this syntax are configuration parameters that
reference the downstream sub-carrier mask. It is a bitmap of up reference the downstream sub-carrier mask. It is a bitmap of up
to 4096 bits. to 4096 bits.
o Xdsl2ScMaskUs: o Xdsl2ScMaskUs:
Attributes with this syntax are configuration parameters that Attributes with this syntax are configuration parameters that
reference the upstream sub-carrier mask. It is a bitmap of up to reference the upstream sub-carrier mask. It is a bitmap of up to
4096 bits. 4096 bits.
o Xdsl2CarMask:
Attributes with this syntax is a configuration parameter for VDSL2
transmission modes that defines an array of up to 32 bands. Each
band is represented by a start subcarrier index followed by a stop
subcarrier index.
o Xdsl2RfiDs: o Xdsl2RfiDs:
Attributes with this syntax are configuration parameters that Attributes with this syntax are configuration parameters that
reference the downstream notch filters. It is a bitmap of up to reference the downstream notch filters. It is a bitmap of up to
4096 bits. 4096 bits.
o Xdsl2PsdMaskDs: o Xdsl2PsdMaskDs:
Attributes with this syntax are configuration parameters that Attributes with this syntax are configuration parameters that
reference the downstream power spectrum density (PSD) mask. It is reference the downstream power spectrum density (PSD) mask. It is
skipping to change at page 14, line 23 skipping to change at page 15, line 23
This group supports MIB objects for retrieving channel layer This group supports MIB objects for retrieving channel layer
status information. It contains the following table: status information. It contains the following table:
- xdsl2ChannelStatusTable - xdsl2ChannelStatusTable
o Subcarrier Status Group: o Subcarrier Status Group:
This group supports MIB objects for retrieving the sub-carrier This group supports MIB objects for retrieving the sub-carrier
layer status information, mostly collected by a Dual Ended Line layer status information, mostly collected by a Dual Ended Line
Test (DELT) process. It contains the following table: Test (DELT) process. It contains the following tables:
- xdsl2SCStatusMainTable
- xdsl2SCStatusTable - xdsl2SCStatusTable
o Unit Inventory Group: o Unit Inventory Group:
This group supports MIB objects for retrieving Unit inventory This group supports MIB objects for retrieving Unit inventory
information about units in VDSL2/ADSL/ADSL2 or ADSL2+ lines via information about units in VDSL2/ADSL/ADSL2 or ADSL2+ lines via
the EOC. It contains the following table: the EOC. It contains the following table:
- xdsl2LineInventoryTable - xdsl2LineInventoryTable
skipping to change at page 16, line 29 skipping to change at page 17, line 29
- xdsl2LinePerfFailedFullInitThresh - xdsl2LinePerfFailedFullInitThresh
- xdsl2LinePerfFailedShortInitThresh - xdsl2LinePerfFailedShortInitThresh
- xdsl2LineStatusChangeXtuc - xdsl2LineStatusChangeXtuc
- xdsl2LineStatusChangeXtur - xdsl2LineStatusChangeXtur
2.5. Persistence 2.5. Persistence
All read-create objects and most read-write objects defined in this All read-create objects and most read-write objects defined in this
MIB module SHOULD be stored persistently. Following is an exhaustive MIB module SHOULD be stored persistently. Following is an exhaustive
list of these persistent objects: list of these persistent objects:
------***************************************************** ----- The ------***************************************************** ------The
following list will probably be partially changed following list will probably be partially changed
------***************************************************** ------*****************************************************
xdsl2LineCnfgTemplate xdsl2LineCnfgTemplate
xdsl2LineAlarmCnfgTemplate xdsl2LineAlarmCnfgTemplate
xdsl2LineCmndConfPmsf xdsl2LineCmndConfPmsf
xdsl2LineCmndConfLdsf
xdsl2LineCmndAutomodeColdStart
xdsl2LConfTempTemplateName xdsl2LConfTempTemplateName
xdsl2LConfTempLineProfile xdsl2LConfTempLineProfile
xdsl2LConfTempChan1ConfProfile xdsl2LConfTempChan1ConfProfile
xdsl2LConfTempChan1RaRatioDs xdsl2LConfTempChan1RaRatioDs
xdsl2LConfTempChan1RaRatioUs xdsl2LConfTempChan1RaRatioUs
xdsl2LConfTempChan2ConfProfile xdsl2LConfTempChan2ConfProfile
xdsl2LConfTempChan2RaRatioDs xdsl2LConfTempChan2RaRatioDs
xdsl2LConfTempChan2RaRatioUs xdsl2LConfTempChan2RaRatioUs
xdsl2LConfTempChan3ConfProfile xdsl2LConfTempChan3ConfProfile
xdsl2LConfTempChan3RaRatioDs xdsl2LConfTempChan3RaRatioDs
skipping to change at page 20, line 19 skipping to change at page 21, line 18
FEC events) there are event counters, current 15-minute and 0 to 96 FEC events) there are event counters, current 15-minute and 0 to 96
15-minute history bucket(s) of "interval-counters", as well as 15-minute history bucket(s) of "interval-counters", as well as
current and 0 to 30 previous 1-day interval-counter(s). Each current current and 0 to 30 previous 1-day interval-counter(s). Each current
15-minute event bucket has an associated threshold notification. 15-minute event bucket has an associated threshold notification.
2.7.2. Minimum Number Of Buckets 2.7.2. Minimum Number Of Buckets
Although it is possible to support up to 96 15-minute history buckets Although it is possible to support up to 96 15-minute history buckets
of "interval-counters", systems implementing this MIB module SHOULD of "interval-counters", systems implementing this MIB module SHOULD
practically support at least 16 buckets, as specified in ITU-T practically support at least 16 buckets, as specified in ITU-T
G.997.1, paragraph 7.2.7.2. G.997.1, paragraph 7.2.7.9.
Similarly, it is possible to support up to 30 previous 1-day Similarly, it is possible to support up to 30 previous 1-day
"interval-counters", but systems implementing this MIB module SHOULD "interval-counters", but systems implementing this MIB module SHOULD
support at least 1 previous day buckets. support at least 1 previous day buckets.
2.7.3. Interval Buckets Initialization 2.7.3. Interval Buckets Initialization
There is no requirement for an agent to ensure a fixed relationship There is no requirement for an agent to ensure a fixed relationship
between the start of a 15-minute interval and any wall clock; between the start of a 15-minute interval and any wall clock;
however, some implementations may align the 15-minute intervals with however, some implementations may align the 15-minute intervals with
skipping to change at page 23, line 49 skipping to change at page 24, line 51
template. template.
One or more lines may be configured to share parameters of a single One or more lines may be configured to share parameters of a single
Alarm configuration template (e.g., xdsl2LAlarmConfTempTemplateName = Alarm configuration template (e.g., xdsl2LAlarmConfTempTemplateName =
'silver') by setting its xdsl2LCnfgAlarmTemplate objects to the value 'silver') by setting its xdsl2LCnfgAlarmTemplate objects to the value
of this template. of this template.
Before a template can be deleted or taken out of service it MUST be Before a template can be deleted or taken out of service it MUST be
first unreferenced from all associated lines. Implementations MAY first unreferenced from all associated lines. Implementations MAY
also reject template modification while it is associated with any also reject template modification while it is associated with any
line. Implementations MUST reject template modification while its line.
row status is set to 'active'.
Before a profile can be deleted or taken out of service it MUST be Before a profile can be deleted or taken out of service it MUST be
first unreferenced from all associated templates. Implementations first unreferenced from all associated templates. Implementations
MAY also reject profile modification while it is referenced by any MAY also reject profile modification while it is referenced by any
template. Implementations MUST reject profile modification while its template.
row status is set to 'active'.
Implementations MUST provide a default profile whose name is 'DEFVAL' Implementations MUST provide a default profile whose name is 'DEFVAL'
for each profile and template type. The values of the associated for each profile and template type. The values of the associated
parameters will be vendor-specific unless otherwise indicated in this parameters will be vendor-specific unless otherwise indicated in this
document. Before a line's templates have been set, these templates document. Before a line's templates have been set, these templates
will be automatically used by setting xdsl2LCnfgLineTemplate and will be automatically used by setting xdsl2LCnfgLineTemplate and
xdsl2LCnfgAlarmTemplate to 'DEFVAL' where appropriate. This default xdsl2LCnfgAlarmTemplate to 'DEFVAL' where appropriate. This default
profile name, 'DEFVAL', is considered reserved in the context of profile name, 'DEFVAL', is considered reserved in the context of
profiles and templates defined in this MIB module. profiles and templates defined in this MIB module.
skipping to change at page 25, line 26 skipping to change at page 26, line 26
cleared. cleared.
The notifications defined in this MIB module are for status change The notifications defined in this MIB module are for status change
(e.g., initialization failure) and for the threshold crossings (e.g., initialization failure) and for the threshold crossings
associated with the following events: Full initialization failures, associated with the following events: Full initialization failures,
short initialization failures, ES, SES, FEC Seconds, LOS Seconds, short initialization failures, ES, SES, FEC Seconds, LOS Seconds,
UAS, FEC Seconds, FEC events, and CRC anomalies. Each threshold has UAS, FEC Seconds, FEC events, and CRC anomalies. Each threshold has
its own enable/threshold value. When that value is 0, the its own enable/threshold value. When that value is 0, the
notification is disabled. notification is disabled.
The xdsl2LStatusStatusAtur and adsl2LStatusStatusAtuc are bitmasks The xdsl2LStatusStatusXtur and adsl2LStatusStatusXtuc are bitmasks
representing all outstanding error conditions associated with the representing all outstanding error conditions associated with the
AtuR and xtuc (respectively). Note that since the xtur status is AtuR and xtuc (respectively). Note that since the xtur status is
obtained via the EOC, this information may be unavailable in case the obtained via the EOC, this information may be unavailable in case the
xtur is unreachable via EOC during a line error condition. xtur is unreachable via EOC during a line error condition.
Therefore, not all conditions may always be included in its current Therefore, not all conditions may always be included in its current
status. Notifications corresponding to the bit fields in those two status. Notifications corresponding to the bit fields in those two
status objects are defined. status objects are defined.
Note that there are other status parameters that refer to the AtuR Note that there are other status parameters that refer to the AtuR
(e.g., downstream line attenuation). Those parameters also depend on (e.g., downstream line attenuation). Those parameters also depend on
skipping to change at page 26, line 30 skipping to change at page 27, line 30
IMPORTS IMPORTS
MODULE-IDENTITY, MODULE-IDENTITY,
transmission transmission
FROM SNMPv2-SMI FROM SNMPv2-SMI
TEXTUAL-CONVENTION TEXTUAL-CONVENTION
FROM SNMPv2-TC; FROM SNMPv2-TC;
vdsl2TCMIB MODULE-IDENTITY vdsl2TCMIB MODULE-IDENTITY
LAST-UPDATED "200601220000Z" -- January 22, 2006 LAST-UPDATED "200608010000Z" -- August 1, 2006
ORGANIZATION "ADSLMIB Working Group" ORGANIZATION "ADSLMIB Working Group"
CONTACT-INFO "WG-email: adslmib@ietf.org CONTACT-INFO "WG-email: adslmib@ietf.org
Info: https://www1.ietf.org/mailman/listinfo/adslmib Info: https://www1.ietf.org/mailman/listinfo/adslmib
Chair: Mike Sneed Chair: Mike Sneed
Sand Channel Systems Sand Channel Systems
Postal: P.O. Box 37324 Postal: P.O. Box 37324
Raleigh NC 27627-732 Raleigh NC 27627-732
Email: sneedmike@hotmail.com Email: sneedmike@hotmail.com
Phone: +1 206 600 7022 Phone: +1 206 600 7022
skipping to change at page 27, line 42 skipping to change at page 28, line 42
DESCRIPTION DESCRIPTION
"This MIB Module provides Textual Conventions to be "This MIB Module provides Textual Conventions to be
used by the VDSL2-LINE-MIB module for the purpose of used by the VDSL2-LINE-MIB module for the purpose of
managing VDSL2, ADSL, ADSL2 and ADSL2+ lines. managing VDSL2, ADSL, ADSL2 and ADSL2+ lines.
Copyright (C) The Internet Society (2006). This version of Copyright (C) The Internet Society (2006). This version of
this MIB module is part of RFC XXXX: see the RFC itself for this MIB module is part of RFC XXXX: see the RFC itself for
full legal notices." full legal notices."
-- RFC Ed.: replace XXXX with assigned number & remove this note -- RFC Ed.: replace XXXX with assigned number & remove this note
REVISION "200601220000Z" -- January 22, 2006 REVISION "200608010000Z" -- August 1, 2006
DESCRIPTION "Initial version, published as RFC XXXX." DESCRIPTION "Initial version, published as RFC XXXX."
-- RFC Ed.: replace XX with assigned number & remove this note -- RFC Ed.: replace XX with assigned number & remove this note
::= { transmission xxx 2} -- vdsl2MIB 2 ::= { transmission xxx 2} -- vdsl2MIB 2
-- IANA, the xxx here must be the same as the one assigned -- IANA, the xxx here must be the same as the one assigned
-- to the vdsl2MIB below. -- to the vdsl2MIB below.
-- RFC Ed.: Please fill in xxx once assigned by IANA. -- RFC Ed.: Please fill in xxx once assigned by IANA.
------------------------------------------------ ------------------------------------------------
-- Textual Conventions -- -- Textual Conventions --
------------------------------------------------ ------------------------------------------------
skipping to change at page 28, line 38 skipping to change at page 29, line 38
"Identifies the direction of a band as being "Identifies the direction of a band as being
either upstream or downstream. Specified as an INTEGER, either upstream or downstream. Specified as an INTEGER,
the two values are: the two values are:
upstream(1) upstream(1)
downstream(2)" downstream(2)"
SYNTAX INTEGER { SYNTAX INTEGER {
upstream(1), upstream(1),
downstream(2) downstream(2)
} }
------*****************************************************
----- The following TC doesn't include yet the VDSL2 bits
------*****************************************************
Xdsl2TransmissionModeType ::= TEXTUAL-CONVENTION Xdsl2TransmissionModeType ::= TEXTUAL-CONVENTION
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A set of ADSL2 line transmission modes, with one bit "A set of xDSL line transmission modes, with one bit
per mode. The notes (F) and (L) denote Full-Rate per mode. The notes (F) and (L) denote Full-Rate
and Lite/splitterless respectively: and Lite/splitterless respectively:
Bit 00 : Regional Std. (ANSI T1.413) (F) Bit 00 : Regional Std. (ANSI T1.413) (F)
Bit 01 : Regional Std. (ETSI DTS/TM06006) (F) Bit 01 : Regional Std. (ETSI DTS/TM06006) (F)
Bit 02 : G.992.1 POTS non-overlapped (F) Bit 02 : G.992.1 POTS non-overlapped (F)
Bit 03 : G.992.1 POTS overlapped (F) Bit 03 : G.992.1 POTS overlapped (F)
Bit 04 : G.992.1 ISDN non-overlapped (F) Bit 04 : G.992.1 ISDN non-overlapped (F)
Bit 05 : G.992.1 ISDN overlapped (F) Bit 05 : G.992.1 ISDN overlapped (F)
Bit 06 : G.992.1 TCM-ISDN non-overlapped (F) Bit 06 : G.992.1 TCM-ISDN non-overlapped (F)
Bit 07 : G.992.1 TCM-ISDN overlapped (F) Bit 07 : G.992.1 TCM-ISDN overlapped (F)
skipping to change at page 29, line 50 skipping to change at page 30, line 47
Bit 41 : G.992.5 POTS overlapped (F) Bit 41 : G.992.5 POTS overlapped (F)
Bit 42 : G.992.5 ISDN non-overlapped (F) Bit 42 : G.992.5 ISDN non-overlapped (F)
Bit 43 : G.992.5 ISDN overlapped (F) Bit 43 : G.992.5 ISDN overlapped (F)
Bit 44-45: Reserved Bit 44-45: Reserved
Bit 46 : G.992.5 Annex I All-Digital non-overlapped (F) Bit 46 : G.992.5 Annex I All-Digital non-overlapped (F)
Bit 47 : G.992.5 Annex I All-Digital overlapped (F) Bit 47 : G.992.5 Annex I All-Digital overlapped (F)
Bit 48 : G.992.5 Annex J All-Digital non-overlapped (F) Bit 48 : G.992.5 Annex J All-Digital non-overlapped (F)
Bit 49 : G.992.5 Annex J All-Digital overlapped (F) Bit 49 : G.992.5 Annex J All-Digital overlapped (F)
Bit 50 : G.992.5 Annex M POTS non-overlapped (F) Bit 50 : G.992.5 Annex M POTS non-overlapped (F)
Bit 51 : G.992.5 Annex M POTS overlapped (F) Bit 51 : G.992.5 Annex M POTS overlapped (F)
Bit 52-55: Reserved" Bit 52-55: Reserved
Bit 56 : G.993.2 Annex A
Bit 57 : G.993.2 Annex B
Bit 58 : G.993.2 Annex C
Bit 59-63: Reserved"
SYNTAX BITS { SYNTAX BITS {
ansit1413(0), ansit1413(0),
etsi(1), etsi(1),
q9921PotsNonOverlapped(2), g9921PotsNonOverlapped(2),
q9921PotsOverlapped(3), g9921PotsOverlapped(3),
q9921IsdnNonOverlapped(4), g9921IsdnNonOverlapped(4),
q9921isdnOverlapped(5), g9921isdnOverlapped(5),
q9921tcmIsdnNonOverlapped(6), g9921tcmIsdnNonOverlapped(6),
q9921tcmIsdnOverlapped(7), g9921tcmIsdnOverlapped(7),
q9922potsNonOverlapeed(8), g9922potsNonOverlapeed(8),
q9922potsOverlapped(9), g9922potsOverlapped(9),
q9922tcmIsdnNonOverlapped(10), g9922tcmIsdnNonOverlapped(10),
q9922tcmIsdnOverlapped(11), g9922tcmIsdnOverlapped(11),
q9921tcmIsdnSymmetric(12), g9921tcmIsdnSymmetric(12),
reserved1(13), reserved1(13),
reserved2(14), reserved2(14),
reserved3(15), reserved3(15),
reserved4(16), reserved4(16),
reserved5(17), reserved5(17),
q9923PotsNonOverlapped(18), g9923PotsNonOverlapped(18),
q9923PotsOverlapped(19), g9923PotsOverlapped(19),
q9923IsdnNonOverlapped(20), g9923IsdnNonOverlapped(20),
q9923isdnOverlapped(21), g9923isdnOverlapped(21),
reserved6(22), reserved6(22),
reserved7(23), reserved7(23),
q9924potsNonOverlapeed(24), g9924potsNonOverlapeed(24),
q9924potsOverlapped(25), g9924potsOverlapped(25),
reserved8(26), reserved8(26),
reserved9(27), reserved9(27),
q9923AnnexIAllDigNonOverlapped(28), g9923AnnexIAllDigNonOverlapped(28),
q9923AnnexIAllDigOverlapped(29), g9923AnnexIAllDigOverlapped(29),
q9923AnnexJAllDigNonOverlapped(30), g9923AnnexJAllDigNonOverlapped(30),
q9923AnnexJAllDigOverlapped(31), g9923AnnexJAllDigOverlapped(31),
q9924AnnexIAllDigNonOverlapped(32), g9924AnnexIAllDigNonOverlapped(32),
q9924AnnexIAllDigOverlapped(33), g9924AnnexIAllDigOverlapped(33),
q9923AnnexLMode1NonOverlapped(34), g9923AnnexLMode1NonOverlapped(34),
q9923AnnexLMode2NonOverlapped(35), g9923AnnexLMode2NonOverlapped(35),
q9923AnnexLMode3Overlapped(36), g9923AnnexLMode3Overlapped(36),
q9923AnnexLMode4Overlapped(37), g9923AnnexLMode4Overlapped(37),
q9923AnnexMPotsNonOverlapped(38), g9923AnnexMPotsNonOverlapped(38),
q9923AnnexMPotsOverlapped(39), g9923AnnexMPotsOverlapped(39),
q9925PotsNonOverlapped(40), g9925PotsNonOverlapped(40),
q9925PotsOverlapped(41), g9925PotsOverlapped(41),
q9925IsdnNonOverlapped(42), g9925IsdnNonOverlapped(42),
q9925isdnOverlapped(43), g9925isdnOverlapped(43),
reserved10(44), reserved10(44),
reserved11(45), reserved11(45),
q9925AnnexIAllDigNonOverlapped(46), g9925AnnexIAllDigNonOverlapped(46),
q9925AnnexIAllDigOverlapped(47), g9925AnnexIAllDigOverlapped(47),
q9925AnnexJAllDigNonOverlapped(48), g9925AnnexJAllDigNonOverlapped(48),
q9925AnnexJAllDigOverlapped(49), g9925AnnexJAllDigOverlapped(49),
q9925AnnexMPotsNonOverlapped(50), g9925AnnexMPotsNonOverlapped(50),
q9925AnnexMPotsOverlapped(51), g9925AnnexMPotsOverlapped(51),
reserved12(52), reserved12(52),
reserved13(53), reserved13(53),
reserved14(54), reserved14(54),
reserved15(55) reserved15(55),
g9932AnnexA(56),
g9932AnnexB(57),
g9932AnnexC(58),
reserved16(59),
reserved17(60),
reserved18(61),
reserved19(62),
reserved20(63)
} }
Xdsl2RaMode ::= TEXTUAL-CONVENTION Xdsl2RaMode ::= TEXTUAL-CONVENTION
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Specifies the rate adaptation behavior for the line. "Specifies the rate adaptation behavior for the line.
The three possible behaviors are: The three possible behaviors are:
manual (1) - No Rate-Adaptation. The initialization manual (1) - No Rate-Adaptation. The initialization
process attempts to synchronize to a process attempts to synchronize to a
specified rate. specified rate.
rainit (2) - Rate-Adaptation during initialization process raInit (2) - Rate-Adaptation during initialization process
only, which attempts to synchronize to a rate only, which attempts to synchronize to a rate
between minimum and maximum specified values. between minimum and maximum specified values.
dynamicRa (3)- Dynamic Rate-Adaptation during initialization dynamicRa (3)- Dynamic Rate-Adaptation during initialization
process as well as during SHOWTIME" process as well as during SHOWTIME"
SYNTAX INTEGER { SYNTAX INTEGER {
manual(1), manual(1),
raInit(2), raInit(2),
dynamicRa(3) dynamicRa(3)
} }
skipping to change at page 32, line 4 skipping to change at page 33, line 13
noPeerAtu (4) - Peer ATU not detected noPeerAtu (4) - Peer ATU not detected
otherCause (5) - Other initialization failure reason" otherCause (5) - Other initialization failure reason"
SYNTAX INTEGER { SYNTAX INTEGER {
noFail(0), noFail(0),
configError(1), configError(1),
configNotFeasible(2), configNotFeasible(2),
commFail(3), commFail(3),
noPeerAtu(4), noPeerAtu(4),
otherCause(5) otherCause(5)
} }
------*****************************************************
----- The following TC is subject to thorough changes
------*****************************************************
Xdsl2OperationModes ::= TEXTUAL-CONVENTION Xdsl2OperationModes ::= TEXTUAL-CONVENTION
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The VDSL2 management model specified includes an xDSL Mode "The VDSL2 management model specified includes an xDSL Mode
attribute which identifies an instance of xDSL Mode-Specific attribute which identifies an instance of xDSL Mode-Specific
PSD Configuration object in the xDSL Line Profile. The PSD Configuration object in the xDSL Line Profile. The
following classes of xDSL operating mode are defined. " following classes of xDSL operating mode are defined.
The notes (F) and (L) denote Full-Rate and Lite/splitterless
respectively:
+-------+--------------------------------------------------+
| Value | xDSL operation mode description |
+-------+--------------------------------------------------+
1 - The default/generic PSD configuration. Default
configuration will be used when no other matching
mode specific configuration can be found.
2 - ADSL family. The attributes included in the Mode-
Specific PSD Configuration are irrelevant for
ITU-T G.992.1 and G.992.2 ADSL modes. Hence, it
is possible to map those modes to this generic
class.
3-7 - Unused. Reserved for future ITU-T specification.
8 - G.992.3 POTS non-overlapped (F)
9 - G.992.3 POTS overlapped (F)
10 - G.992.3 ISDN non-overlapped (F)
11 - G.992.3 ISDN overlapped (F)
12-13 - Unused. Reserved for future ITU-T specification.
14 - G.992.4 POTS non-overlapped (L)
15 - G.992.4 POTS overlapped (L)
16-17 - Unused. Reserved for future ITU-T specification.
18 - G.992.3 Annex I All-Digital non-overlapped (F)
19 - G.992.3 Annex I All-Digital overlapped (F)
20 - G.992.3 Annex J All-Digital non-overlapped (F)
21 - G.992.3 Annex J All-Digital overlapped (F)
22 - G.992.4 Annex I All-Digital non-overlapped (L)
23 - G.992.4 Annex I All-Digital overlapped (L)
24 - G.992.3 Annex L POTS non-overlapped, mode 1,
wide U/S (F)
25 - G.992.3 Annex L POTS non-overlapped, mode 2,
narrow U/S(F)
26 - G.992.3 Annex L POTS overlapped, mode 3,
wide U/S (F)
27 - G.992.3 Annex L POTS overlapped, mode 4,
narrow U/S (F)
28 - G.992.3 Annex M POTS non-overlapped (F)
29 - G.992.3 Annex M POTS overlapped (F)
30 - G.992.5 POTS non-overlapped (F)
31 - G.992.5 POTS overlapped (F)
32 - G.992.5 ISDN non-overlapped (F)
33 - G.992.5 ISDN overlapped (F)
34-35 - Unused. Reserved for future ITU-T specification.
36 - G.992.5 Annex I All-Digital non-overlapped (F)
37 - G.992.5 Annex I All-Digital overlapped (F)
38 - G.992.5 Annex J All-Digital non-overlapped (F)
39 - G.992.5 Annex J All-Digital overlapped (F)
40 - G.992.5 Annex M POTS non-overlapped (F)
41 - G.992.5 Annex M POTS overlapped (F)
42-45 - Unused. Reserved for future ITU-T specification.
46 - G.993.2 Annex A
47 - G.993.2 Annex B
48 - G.993.2 Annex C
"
SYNTAX INTEGER { SYNTAX INTEGER {
defMode (1), defMode (1),
adsl (2), adsl (2),
adsl2Pots (3), g9923PotsNonOverlapped(8),
adsl2Isdn (4), g9923PotsOverlapped(9),
adsl2PlusPots (5), g9923IsdnNonOverlapped(10),
adsl2PlusIsdn (6), g9923isdnOverlapped(11),
adsl2ReachExtended (7) g9924potsNonOverlapeed(14),
g9924potsOverlapped(15),
g9923AnnexIAllDigNonOverlapped(18),
g9923AnnexIAllDigOverlapped(19),
g9923AnnexJAllDigNonOverlapped(20),
g9923AnnexJAllDigOverlapped(21),
g9924AnnexIAllDigNonOverlapped(22),
g9924AnnexIAllDigOverlapped(23),
g9923AnnexLMode1NonOverlapped(24),
g9923AnnexLMode2NonOverlapped(25),
g9923AnnexLMode3Overlapped(26),
g9923AnnexLMode4Overlapped(27),
g9923AnnexMPotsNonOverlapped(28),
g9923AnnexMPotsOverlapped(29),
g9925PotsNonOverlapped(30),
g9925PotsOverlapped(31),
g9925IsdnNonOverlapped(32),
g9925isdnOverlapped(33),
g9925AnnexIAllDigNonOverlapped(36),
g9925AnnexIAllDigOverlapped(37),
g9925AnnexJAllDigNonOverlapped(38),
g9925AnnexJAllDigOverlapped(39),
g9925AnnexMPotsNonOverlapped(40),
g9925AnnexMPotsOverlapped(41),
g9932AnnexA(46),
g9932AnnexB(47),
g9932AnnexC(48)
} }
Xdsl2PowerMngState ::= TEXTUAL-CONVENTION Xdsl2PowerMngState ::= TEXTUAL-CONVENTION
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Attributes with this syntax uniquely identify each power "Attributes with this syntax uniquely identify each power
management state defined for the VDSL2/ADSL/ADSL2 or ADSL2+ management state defined for the VDSL2/ADSL/ADSL2 or ADSL2+
link. link.
In VDSL2 only L0 and L3 states are defined. In VDSL2 only L0 and L3 states are defined.
The possible values are: The possible values are:
skipping to change at page 33, line 18 skipping to change at page 36, line 8
(Low power management state) (Low power management state)
l0orL2toL3 (3) - Perform a transition into L3 (Idle l0orL2toL3 (3) - Perform a transition into L3 (Idle
power management state)" power management state)"
SYNTAX INTEGER { SYNTAX INTEGER {
l3toL0 (0), l3toL0 (0),
l0toL2 (2), l0toL2 (2),
l0orL2toL3 (3) l0orL2toL3 (3)
} }
Xdsl2LConfProfPmMode ::= TEXTUAL-CONVENTION Xdsl2LinePmMode ::= TEXTUAL-CONVENTION
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Attributes with this syntax are configuration parameters "Attributes with this syntax are configuration parameters
that reference the power modes/states into which the xTU-C or that reference the power modes/states into which the xTU-C or
xTU-R may autonomously transit. xTU-R may autonomously transit.
It is a BITS structure that allows control of the following It is a BITS structure that allows control of the following
transit options: transit options:
allowTransitionsToIdle (0) - xTU may autonomously transit allowTransitionsToIdle (0) - xTU may autonomously transit
to idle (L3) state. to idle (L3) state.
skipping to change at page 34, line 45 skipping to change at page 37, line 36
unsupported (4), unsupported (4),
cannotRun (5), cannotRun (5),
aborted (6), aborted (6),
failed (7), failed (7),
illegalMode (8), illegalMode (8),
adminUp (9), adminUp (9),
tableFull (10), tableFull (10),
noResources (11) noResources (11)
} }
Xdsl2LineProfiles ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Attributes with this syntax reference the list of
ITU-T G.993.2 implementation profiles supported by an
xTU, enabled on the VDSL2 line or active on that line."
SYNTAX BITS {
profile8a(0),
profile8b(1),
profile8c(2),
profile8d(3),
profile12a(4),
profile12b(5),
profile17a(6),
profile30a(7)
}
Xdsl2LineClassMask ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"VDSL2 PSD Mask Class.
The limit Power Spectral Density masks are grouped in
the following PSD mask classes:
Class 998 Annex A: D-32, D-64.
Class 997-M1c Annex B: 997-M1c-A-7.
Class 997-M1x Annex B: 997-M1x-M-8, 997-M1x-M.
Class 997-M2x Annex B: 997-M2x-M-8, 997-M2x-A, 997-M2x-M.
Class 998-M1x Annex B: 998-M1x-A, 998-M1x-B, 998-M1x-NUS0.
Class 998-M2x Annex B: 998-M2x-A, 998-M2x-M, 998-M2x-B,
998-M2x-NUS0.
Class 998 Annex C: POTS (C.2.1.1/G.993.2),
TCM-ISDN (C.2.1.2/G.993.2)."
SYNTAX INTEGER {
none(1),
a998ORb997M1cORc998(2),
b997M1x(3),
b997M2x(4),
b998M1x(5),
b998M2x(6)
}
Xdsl2LineLimitMask ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The G.993.2 limit PSD mask for each class of profile.
The profiles are grouped in following profile classes:
- Class 8: Profiles 8a, 8b, 8c, 8d
- Class 12: Profiles 12a, 12b
- Class 17: Profile 17a
- Class 30: Profile 30a."
SYNTAX BITS {
profile8Limit1(0),
profile8Limit2(1),
profile8Limit3(2),
profile8Limit4(3),
profile8Limit5(4),
profile8Limit6(5),
profile8Limit7(6),
profile8Limit8(7),
profile8Limit9(8),
profile8Limit10(9),
profile8Limit11(10),
profile8Limit12(11),
profile8Limit13(12),
profile8Limit14(13),
profile8Limit15(14),
profile8Limit16(15),
--
profile12Limit1(16),
profile12Limit2(17),
profile12Limit3(18),
profile12Limit4(19),
profile12Limit5(20),
profile12Limit6(21),
profile12Limit7(22),
profile12Limit8(23),
profile12Limit9(24),
profile12Limit10(25),
profile12Limit11(26),
profile12Limit12(27),
profile12Limit13(28),
profile12Limit14(29),
profile12Limit15(30),
profile12Limit16(31),
--
profile17Limit1(32),
profile17Limit2(33),
profile17Limit3(34),
profile17Limit4(35),
profile17Limit5(36),
profile17Limit6(37),
profile17Limit7(38),
profile17Limit8(39),
profile17Limit9(40),
profile17Limit10(41),
profile17Limit11(42),
profile17Limit12(43),
profile17Limit13(44),
profile17Limit14(45),
profile17Limit15(46),
profile17Limit16(47),
--
profile30Limit1(48),
profile30Limit2(49),
profile30Limit3(50),
profile30Limit4(51),
profile30Limit5(52),
profile30Limit6(53),
profile30Limit7(54),
profile30Limit8(55),
profile30Limit9(56),
profile30Limit10(57),
profile30Limit11(58),
profile30Limit12(59),
profile30Limit13(60),
profile30Limit14(61),
profile30Limit15(62),
profile30Limit16(63)
}
Xdsl2LineUs0Disable ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"Indicates if US0 is disabled for each limit PSD mask.
The profiles are grouped in following profile classes:
- Class 8: Profiles 8a, 8b, 8c, 8d
- Class 12: Profiles 12a, 12b
- Class 17: Profile 17a
- Class 30: Profile 30a."
SYNTAX BITS {
profile8Us0Disable1(0),
profile8Us0Disable2(1),
profile8Us0Disable3(2),
profile8Us0Disable4(3),
profile8Us0Disable5(4),
profile8Us0Disable6(5),
profile8Us0Disable7(6),
profile8Us0Disable8(7),
profile8Us0Disable9(8),
profile8Us0Disable10(9),
profile8Us0Disable11(10),
profile8Us0Disable12(11),
profile8Us0Disable13(12),
profile8Us0Disable14(13),
profile8Us0Disable15(14),
profile8Us0Disable16(15),
--
profile12Us0Disable1(16),
profile12Us0Disable2(17),
profile12Us0Disable3(18),
profile12Us0Disable4(19),
profile12Us0Disable5(20),
profile12Us0Disable6(21),
profile12Us0Disable7(22),
profile12Us0Disable8(23),
profile12Us0Disable9(24),
profile12Us0Disable10(25),
profile12Us0Disable11(26),
profile12Us0Disable12(27),
profile12Us0Disable13(28),
profile12Us0Disable14(29),
profile12Us0Disable15(30),
profile12Us0Disable16(31),
--
profile17Us0Disable1(32),
profile17Us0Disable2(33),
profile17Us0Disable3(34),
profile17Us0Disable4(35),
profile17Us0Disable5(36),
profile17Us0Disable6(37),
profile17Us0Disable7(38),
profile17Us0Disable8(39),
profile17Us0Disable9(40),
profile17Us0Disable10(41),
profile17Us0Disable11(42),
profile17Us0Disable12(43),
profile17Us0Disable13(44),
profile17Us0Disable14(45),
profile17Us0Disable15(46),
profile17Us0Disable16(47),
--
profile30Us0Disable1(48),
profile30Us0Disable2(49),
profile30Us0Disable3(50),
profile30Us0Disable4(51),
profile30Us0Disable5(52),
profile30Us0Disable6(53),
profile30Us0Disable7(54),
profile30Us0Disable8(55),
profile30Us0Disable9(56),
profile30Us0Disable10(57),
profile30Us0Disable11(58),
profile30Us0Disable12(59),
profile30Us0Disable13(60),
profile30Us0Disable14(61),
profile30Us0Disable15(62),
profile30Us0Disable16(63)
}
Xdsl2LineUs0Mask ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"The US0 PSD masks to be allowed by the near-end xTU on
the line. This parameter is only defined for G.993.2 Annex A.
It is represented as a bitmap (0 if not allowed and 1 if
allowed) with the following definitions."
SYNTAX BITS {
eu32(0),
eu36(1),
eu40(2),
eu44(3),
eu48(4),
eu52(5),
eu56(6),
eu60(7),
--
eu64(8),
reserved1(9),
reserved2(10),
reserved3(11),
reserved4(12),
reserved5(13),
reserved6(14),
reserved7(15),
--
adlu32(16),
adlu36(17),
adlu40(18),
adlu44(19),
adlu48(20),
adlu52(21),
adlu56(22),
adlu60(23),
--
adlu64(24),
reserved8(25),
reserved9(26),
reserved10(27),
reserved11(28),
reserved12(29),
reserved13(30),
reserved14(31)
}
Xdsl2SymbolProtection ::= TEXTUAL-CONVENTION Xdsl2SymbolProtection ::= TEXTUAL-CONVENTION
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Attributes with this syntax are configuration parameters "Attributes with this syntax are configuration parameters
that reference the minimum length impulse noise protection that reference the minimum length impulse noise protection
(INP) in terms of number of symbols. The possible values are: (INP) in terms of number of symbols. The possible values are:
noProtection (i.e., INP not required), halfSymbol (i.e., INP noProtection (i.e., INP not required), halfSymbol (i.e., INP
length is 1/2 symbol), and 1-16 symbols in steps of 1 symbol" length is 1/2 symbol), and 1-16 symbols in steps of 1 symbol"
SYNTAX INTEGER { SYNTAX INTEGER {
noProtection (1), noProtection (1),
halfSymbol (2), halfSymbol (2),
singleSymbol (3), singleSymbol (3),
twoSymbols (4), twoSymbols (4),
threeSymbols (5), threeSymbols (5),
fourSymbols (6), fourSymbols (6),
skipping to change at page 35, line 50 skipping to change at page 44, line 4
} }
Xdsl2ScMaskDs ::= TEXTUAL-CONVENTION Xdsl2ScMaskDs ::= TEXTUAL-CONVENTION
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Each one of the 4096 bits in this OCTET "Each one of the 4096 bits in this OCTET
STRING array represents the corresponding bin STRING array represents the corresponding bin
in the downstream direction. A value of one in the downstream direction. A value of one
indicates that the bin is not in use." indicates that the bin is not in use."
SYNTAX OCTET STRING (SIZE(0..512)) SYNTAX OCTET STRING (SIZE(0..512))
Xdsl2ScMaskUs ::= TEXTUAL-CONVENTION Xdsl2ScMaskUs ::= TEXTUAL-CONVENTION
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Each one of the 4096 bits in this OCTET "Each one of the 4096 bits in this OCTET
STRING array represents the corresponding bin STRING array represents the corresponding bin
in the upstream direction. A value of one in the upstream direction. A value of one
indicates that the bin is not in use." indicates that the bin is not in use."
SYNTAX OCTET STRING (SIZE(0..512)) SYNTAX OCTET STRING (SIZE(0..512))
Xdsl2CarMask ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This type defines an array of bands.
Each band is represented by 4 octets and there
is a maximum of 32 bands allowed.
Each band consists of a 16 bit start subcarrier
index followed by a 16 bit stop subcarrier index."
SYNTAX OCTET STRING (SIZE(0..128))
Xdsl2RfiDs ::= TEXTUAL-CONVENTION Xdsl2RfiDs ::= TEXTUAL-CONVENTION
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Each one of the 4096 bits in this OCTET "Each one of the 4096 bits in this OCTET
STRING array represents the corresponding bin STRING array represents the corresponding bin
in the downstream direction. A value of one in the downstream direction. A value of one
indicates that the bin is part of a notch indicates that the bin is part of a notch
filter." filter."
SYNTAX OCTET STRING (SIZE(0..512)) SYNTAX OCTET STRING (SIZE(0..512))
skipping to change at page 37, line 15 skipping to change at page 45, line 26
Each breakpoint occupies 3 octets: The first Each breakpoint occupies 3 octets: The first
two octets hold the index of the sub-carrier two octets hold the index of the sub-carrier
associated with the breakpoint. The third octet associated with the breakpoint. The third octet
holds the shaping parameter at the breakpoint. It holds the shaping parameter at the breakpoint. It
is a value from 0 to 127 (units of -0.5dB). The is a value from 0 to 127 (units of -0.5dB). The
special value 127 indicates that the sub-carrier special value 127 indicates that the sub-carrier
is not transmitted." is not transmitted."
SYNTAX OCTET STRING (SIZE(0..96)) SYNTAX OCTET STRING (SIZE(0..96))
------***************************************************** ------*****************************************************
----- The following TC we should add VDSL2 related states ------ The following TC we should add VDSL2 related states
------***************************************************** ------*****************************************************
Xdsl2LastTransmittedState ::= TEXTUAL-CONVENTION Xdsl2LastTransmittedState ::= TEXTUAL-CONVENTION
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This parameter represents the last successful "This parameter represents the last successful
transmitted initialization state in the last full transmitted initialization state in the last full
initialization performed on the line States are initialization performed on the line States are
per the specific xDSL technology and are numbered per the specific xDSL technology and are numbered
from 0 (if G.994.1 is used) or 1 (if G.994.1 is from 0 (if G.994.1 is used) or 1 (if G.994.1 is
not used) up to Showtime." not used) up to Showtime."
skipping to change at page 39, line 41 skipping to change at page 48, line 4
This BITS structure can report the following failures: This BITS structure can report the following failures:
noDefect (0) - This bit position positively noDefect (0) - This bit position positively
reports that no defect or failure reports that no defect or failure
exist. exist.
noCellDelineation (1) - The link was successfully noCellDelineation (1) - The link was successfully
initialized but cell delineation initialized but cell delineation
was never acquired on the was never acquired on the
associated ATM data path. associated ATM data path.
lossOfCellDelineation (2)- Loss of cell delineation on the lossOfCellDelineation (2)- Loss of cell delineation on the
associated ATM data path" associated ATM data path"
SYNTAX BITS { SYNTAX BITS {
noDefect(0), noDefect(0),
noCellDelineation(1), noCellDelineation(1),
lossOfCellDelineation(2) lossOfCellDelineation(2)
} }
Xsl2ChPtmStatus ::= TEXTUAL-CONVENTION
Xdsl2ChPtmStatus ::= TEXTUAL-CONVENTION
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Attributes with this syntax are status parameters that "Attributes with this syntax are status parameters that
reflect the failure status for a given PTM interface (packet reflect the failure status for a given PTM interface (packet
data path over a VDSL2/ADSL/ADSL2 or ADSL2+ link). data path over a VDSL2/ADSL/ADSL2 or ADSL2+ link).
This BITS structure can report the following failures: This BITS structure can report the following failures:
noDefect (0) - This bit position positively noDefect (0) - This bit position positively
reports that no defect or failure exist. reports that no defect or failure exist.
outOfSync (1) - Out of synchronization. " outOfSync (1) - Out of synchronization. "
SYNTAX BITS { SYNTAX BITS {
noDefect(0), noDefect(0),
outOfSync(1) outOfSync(1)
} }
END END
VSL2-LINE-MIB DEFINITIONS ::= BEGIN VDSL2-LINE-MIB DEFINITIONS ::= BEGIN
IMPORTS IMPORTS
MODULE-IDENTITY, MODULE-IDENTITY,
OBJECT-TYPE, OBJECT-TYPE,
transmission, transmission,
Unsigned32, Unsigned32,
NOTIFICATION-TYPE, NOTIFICATION-TYPE,
Integer32, Integer32,
Counter32 Counter32
FROM SNMPv2-SMI FROM SNMPv2-SMI
skipping to change at page 41, line 4 skipping to change at page 49, line 13
TruthValue, TruthValue,
RowStatus RowStatus
FROM SNMPv2-TC FROM SNMPv2-TC
SnmpAdminString SnmpAdminString
FROM SNMP-FRAMEWORK-MIB FROM SNMP-FRAMEWORK-MIB
HCPerfIntervalThreshold, HCPerfIntervalThreshold,
HCPerfTimeElapsed HCPerfTimeElapsed
FROM HC-PerfHist-TC-MIB -- [RFC3705] FROM HC-PerfHist-TC-MIB -- [RFC3705]
Xdsl2Unit, Xdsl2Unit,
Xdsl2Direction, Xdsl2Direction,
Xdsl2TransmissionModeType, Xdsl2TransmissionModeType,
Xdsl2RaMode, Xdsl2RaMode,
Xdsl2InitResult, Xdsl2InitResult,
Xdsl2OperationModes, Xdsl2OperationModes,
Xdsl2PowerMngState, Xdsl2PowerMngState,
Xdsl2ConfPmsForce, Xdsl2ConfPmsForce,
Xdsl2LConfProfPmMode, Xdsl2LinePmMode,
Xdsl2LineLdsf, Xdsl2LineLdsf,
Xdsl2LdsfResult, Xdsl2LdsfResult,
Xdsl2SymbolProtection, Xdsl2SymbolProtection,
Xdsl2MaxBer, Xdsl2MaxBer,
Xdsl2ScMaskDs, Xdsl2ScMaskDs,
Xdsl2ScMaskUs, Xdsl2ScMaskUs,
Xdsl2CarMask,
Xdsl2RfiDs, Xdsl2RfiDs,
Xdsl2PsdMaskDs, Xdsl2PsdMaskDs,
Xdsl2PsdMaskUs, Xdsl2PsdMaskUs,
Xdsl2Tssi, Xdsl2Tssi,
Xdsl2LastTransmittedState, Xdsl2LastTransmittedState,
Xdsl2LineStatus, Xdsl2LineStatus,
Xdsl2ChAtmStatus, Xdsl2ChAtmStatus,
Xdsl2ChPtmStatus Xdsl2ChPtmStatus,
FROM VSL2-LINE-TC-MIB -- [This document] Xdsl2LineProfiles,
Xdsl2LineUs0Mask,
Xdsl2LineClassMask,
Xdsl2LineLimitMask,
Xdsl2LineUs0Disable
FROM VDSL2-LINE-TC-MIB -- [This document]
MODULE-COMPLIANCE, MODULE-COMPLIANCE,
OBJECT-GROUP, OBJECT-GROUP,
NOTIFICATION-GROUP NOTIFICATION-GROUP
FROM SNMPv2-CONF; FROM SNMPv2-CONF;
vsl2MIB MODULE-IDENTITY vdsl2MIB MODULE-IDENTITY
LAST-UPDATED "200601220000Z" -- January 22, 2006 LAST-UPDATED "200608010000Z" -- August 1, 2006
ORGANIZATION "ADSLMIB Working Group" ORGANIZATION "ADSLMIB Working Group"
CONTACT-INFO "WG-email: adslmib@ietf.org CONTACT-INFO "WG-email: adslmib@ietf.org
Info: https://www1.ietf.org/mailman/listinfo/adslmib Info: https://www1.ietf.org/mailman/listinfo/adslmib
Chair: Mike Sneed Chair: Mike Sneed
Sand Channel Systems Sand Channel Systems
Postal: P.O. Box 37324 Postal: P.O. Box 37324
Raleigh NC 27627-732 Raleigh NC 27627-732
Email: sneedmike@hotmail.com Email: sneedmike@hotmail.com
Phone: +1 206 600 7022 Phone: +1 206 600 7022
skipping to change at page 43, line 29 skipping to change at page 51, line 46
The MIB module is located in the MIB tree under MIB 2 The MIB module is located in the MIB tree under MIB 2
transmission, as discussed in the MIB-2 Integration (RFC 2863 transmission, as discussed in the MIB-2 Integration (RFC 2863
[RFC2863]) section of this document. [RFC2863]) section of this document.
Copyright (C) The Internet Society (2006). This version of Copyright (C) The Internet Society (2006). This version of
this MIB module is part of RFC XXXX: see the RFC itself for this MIB module is part of RFC XXXX: see the RFC itself for
full legal notices." full legal notices."
-- RFC Ed.: replace XXXX with assigned number & remove this note -- RFC Ed.: replace XXXX with assigned number & remove this note
REVISION "200601220000Z" -- January 22, 2006 REVISION "200608010000Z" -- August 1, 2006
DESCRIPTION "Initial version, published as RFC XXXX." DESCRIPTION "Initial version, published as RFC XXXX."
-- RFC Ed.: replace XXXX with assigned number & remove this note -- RFC Ed.: replace XXXX with assigned number & remove this note
::= { transmission xxx } ::= { transmission xxx }
-- IANA, we suggest to put it under { transmission xxx } because -- IANA, we suggest to put it under { transmission xxx } because
-- this is the first available number. -- this is the first available number.
-- RFC Ed.: Please fill in xxx once assigned by IANA. -- RFC Ed.: Please fill in xxx once assigned by IANA.
vdsl2 OBJECT IDENTIFIER ::= { vdsl2MIB 1 } vdsl2 OBJECT IDENTIFIER ::= { vdsl2MIB 1 }
------------------------------------------------ ------------------------------------------------
xdsl2Line OBJECT IDENTIFIER ::= { vdsl2 1 } xdsl2Line OBJECT IDENTIFIER ::= { vdsl2 1 }
xdsl2Status OBJECT IDENTIFIER ::= { vdsl2 2 } xdsl2Status OBJECT IDENTIFIER ::= { vdsl2 2 }
xdsl2Inventory OBJECT IDENTIFIER ::= { vdsl2 3 } xdsl2Inventory OBJECT IDENTIFIER ::= { vdsl2 3 }
xdsl2PM OBJECT IDENTIFIER ::= { vdsl2 4 } xdsl2PM OBJECT IDENTIFIER ::= { vdsl2 4 }
xdsl2Profile OBJECT IDENTIFIER ::= { vdsl2 5 } xdsl2Profile OBJECT IDENTIFIER ::= { vdsl2 5 }
xdsl2Scalar OBJECT IDENTIFIER ::= { vdsl2 6 } xdsl2Scalar OBJECT IDENTIFIER ::= { vdsl2 6 }
skipping to change at page 44, line 12 skipping to change at page 52, line 29
xdsl2PMChannel OBJECT IDENTIFIER ::= { xdsl2PM 2 } xdsl2PMChannel OBJECT IDENTIFIER ::= { xdsl2PM 2 }
------------------------------------------------ ------------------------------------------------
xdsl2ProfileLine OBJECT IDENTIFIER ::= { xdsl2Profile 1 } xdsl2ProfileLine OBJECT IDENTIFIER ::= { xdsl2Profile 1 }
xdsl2ProfileChannel OBJECT IDENTIFIER ::= { xdsl2Profile 2 } xdsl2ProfileChannel OBJECT IDENTIFIER ::= { xdsl2Profile 2 }
xdsl2ProfileAlarmConf OBJECT IDENTIFIER ::= { xdsl2Profile 3 } xdsl2ProfileAlarmConf OBJECT IDENTIFIER ::= { xdsl2Profile 3 }
------------------------------------------------ ------------------------------------------------
xdsl2ScalarSC OBJECT IDENTIFIER ::= { xdsl2Scalar 1 } xdsl2ScalarSC OBJECT IDENTIFIER ::= { xdsl2Scalar 1 }
------------------------------------------------ ------------------------------------------------
------***************************************************** ------*****************************************************
----- Should revise all references in this MIB ------ Should revise all references in this MIB
------***************************************************** ------*****************************************************
------------------------------------------------ ------------------------------------------------
-- xdsl2LineTable -- -- xdsl2LineTable --
------------------------------------------------ ------------------------------------------------
xdsl2LineTable OBJECT-TYPE xdsl2LineTable OBJECT-TYPE
SYNTAX SEQUENCE OF Xdsl2LineEntry SYNTAX SEQUENCE OF Xdsl2LineEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table adsl2LineTable contains configuration, "The table xdsl2LineTable contains configuration,
command and status parameters of the VDSL2/ADSL/ADSL2 command and status parameters of the VDSL2/ADSL/ADSL2
or ADSL2+ line. or ADSL2+ line.
The index of this table is an interface index where the The index of this table is an interface index where the
interface has an ifType of vdsl2(xxx). interface has an ifType of vdsl2(xxx).
Several objects in this table MUST be maintained in a Several objects in this table MUST be maintained in a
persistent manner. " persistent manner. "
::= { xdsl2Line 1 } ::= { xdsl2Line 1 }
xdsl2LineEntry OBJECT-TYPE xdsl2LineEntry OBJECT-TYPE
SYNTAX Adsl2LineEntry SYNTAX Xdsl2LineEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table xdsl2LineTable contains configuration, "The table xdsl2LineTable contains configuration,
commands and status parameters of the VDSL2/ADSL/ADSL2 commands and status parameters of the VDSL2/ADSL/ADSL2
or ADSL2+ line." or ADSL2+ line."
INDEX { ifIndex } INDEX { ifIndex }
::= { xdsl2LineTable 1 } ::= { xdsl2LineTable 1 }
Xdsl2LineEntry ::= Xdsl2LineEntry ::=
skipping to change at page 46, line 4 skipping to change at page 54, line 21
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The value of this object identifies the row in the xDSL2 Line "The value of this object identifies the row in the xDSL2 Line
Alarm Configuration Template Table, Alarm Configuration Template Table,
(xdsl2LineAlarmConfTemplateTable), which applies to this line. (xdsl2LineAlarmConfTemplateTable), which applies to this line.
This object MUST be maintained in a persistent manner." This object MUST be maintained in a persistent manner."
REFERENCE "DSL Forum TR-129, paragraph 5.1.1" REFERENCE "DSL Forum TR-129, paragraph 5.1.1"
DEFVAL { "DEFVAL" } DEFVAL { "DEFVAL" }
::= { xdsl2LineEntry 2 } ::= { xdsl2LineEntry 2 }
xdsl2LineCmndConfPmsf OBJECT-TYPE xdsl2LineCmndConfPmsf OBJECT-TYPE
SYNTAX Xdsl2ConfPmsForce SYNTAX Xdsl2ConfPmsForce
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Power management state forced. Defines the line states to be "Power management state forced (PMSF). Defines the line
forced by the near-end xTU on this line. The various possible states to be forced by the near-end xTU on this line.
values are: The various possible values are:
l3toL0 (0), l3toL0 (0),
l0toL2 (2), l0toL2 (2),
l0orL2toL3 (3). l0orL2toL3 (3).
This object MUST be maintained in a persistent manner." This object MUST be maintained in a persistent manner."
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.1.3" REFERENCE "ITU-T G.997.1, paragraph 7.3.1.1.3"
DEFVAL { l3toL0 } DEFVAL { l3toL0 }
::= { xdsl2LineEntry 3 } ::= { xdsl2LineEntry 3 }
xdsl2LineCmndConfLdsf OBJECT-TYPE xdsl2LineCmndConfLdsf OBJECT-TYPE
skipping to change at page 48, line 6 skipping to change at page 56, line 24
capabilities of both xTUs (as exchanged in G.994.1), but capabilities of both xTUs (as exchanged in G.994.1), but
also on achievable data rates under given loop also on achievable data rates under given loop
conditions. conditions.
This object MUST be maintained in a persistent manner." This object MUST be maintained in a persistent manner."
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.1.10" REFERENCE "ITU-T G.997.1, paragraph 7.3.1.1.10"
DEFVAL { false } DEFVAL { false }
::= { xdsl2LineEntry 6 } ::= { xdsl2LineEntry 6 }
xdsl2LineStatusAtuTransSys OBJECT-TYPE xdsl2LineStatusXtuTransSys OBJECT-TYPE
SYNTAX Xdsl2TransmissionModeType SYNTAX Xdsl2TransmissionModeType
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The xTU Transmission System (xTS) in use. "The xTU Transmission System (xTS) in use.
It is coded in a bit-map representation with one bit set to It is coded in a bit-map representation with one bit set to
'1' (the selected coding for the DSL line). This parameter '1' (the selected coding for the DSL line). This parameter
may be derived from the handshaking procedures defined in may be derived from the handshaking procedures defined in
Recommendation G.994.1. A set of xDSL line transmission Recommendation G.994.1. A set of xDSL line transmission
modes, with one bit per mode. " modes, with one bit per mode. "
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.1.1" REFERENCE "ITU-T G.997.1, paragraph 7.5.1.1"
::= { xdsl2LineEntry 7 } ::= { xdsl2LineEntry 7 }
xdsl2LineStatusPwrMngState OBJECT-TYPE xdsl2LineStatusPwrMngState OBJECT-TYPE
SYNTAX Xdsl2PowerMngState SYNTAX Xdsl2PowerMngState
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The current power management state. One of four possible "The current power management state. One of four possible
power management states: power management states:
L0 - Synchronized and full transmission (i.e., Showtime), L0 - Synchronized and full transmission (i.e., Showtime),
skipping to change at page 48, line 43 skipping to change at page 57, line 14
REFERENCE "ITU-T G.997.1, paragraph 7.5.1.2" REFERENCE "ITU-T G.997.1, paragraph 7.5.1.2"
::= { xdsl2LineEntry 8 } ::= { xdsl2LineEntry 8 }
xdsl2LineStatusInitResult OBJECT-TYPE xdsl2LineStatusInitResult OBJECT-TYPE
SYNTAX Xdsl2InitResult SYNTAX Xdsl2InitResult
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates the result of the last full initialization performed "Indicates the result of the last full initialization performed
on the line. It is an enumeration type with the following on the line. It is an enumeration type with the following
values: noFailure(0), configError(1), configNotFeasible(2), values: noFail(0), configError(1), configNotFeasible(2),
commFail(3), noPeerAtu(4), otherCause(5)." commFail(3), noPeerAtu(4), otherCause(5)."
REFERENCE "ITU-T G.997.1, paragraph 7.5.1.3" REFERENCE "ITU-T G.997.1, paragraph 7.5.1.3"
::= { xdsl2LineEntry 9 } ::= { xdsl2LineEntry 9 }
xdsl2LineStatusLastStateDs OBJECT-TYPE xdsl2LineStatusLastStateDs OBJECT-TYPE
SYNTAX Xdsl2LastTransmittedState SYNTAX Xdsl2LastTransmittedState
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The last successful transmitted initialization state in "The last successful transmitted initialization state in
skipping to change at page 49, line 44 skipping to change at page 58, line 14
SYNTAX Xdsl2LineStatus SYNTAX Xdsl2LineStatus
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates current state (existing failures) of the xTU-C. "Indicates current state (existing failures) of the xTU-C.
This is a bit-map of possible conditions. " This is a bit-map of possible conditions. "
REFERENCE "ITU-T G.997.1, paragraph 7.1.1.1" REFERENCE "ITU-T G.997.1, paragraph 7.1.1.1"
::= { xdsl2LineEntry 13 } ::= { xdsl2LineEntry 13 }
xdsl2LineStatusLnAttenDs OBJECT-TYPE xdsl2LineStatusLnAttenDs OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32 (0..1270 | 2147483646 | 2147483647)
UNITS "0.1 dB" UNITS "0.1 dB"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The measured difference in the total power transmitted by the "The measured difference in the total power transmitted by the
xTU-C and the total power received by the xTU-R over all sub- xTU-C and the total power received by the xTU-R over all sub-
carriers during diagnostics mode and initialization. It carriers during diagnostics mode and initialization. It
ranges from 0 to 1270 units of 0.1 dB (Physical values ranges from 0 to 1270 units of 0.1 dB (Physical values
are 0 to 127 dB). A value of all 1's indicates the line are 0 to 127 dB).
attenuation is out of range to be represented." A special value of 0x7FFFFFFF (2147483647) indicates the line
attenuation is out of range to be represented.
A special value of 0x7FFFFFFE (2147483646) indicates the line
attenuation measurement is currently unavailable."
REFERENCE "ITU-T G.997.1, paragraph 7.5.1.6" REFERENCE "ITU-T G.997.1, paragraph 7.5.1.6"
::= { xdsl2LineEntry 14 } ::= { xdsl2LineEntry 14 }
xdsl2LineStatusLnAttenUs OBJECT-TYPE xdsl2LineStatusLnAttenUs OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32 (0..1270 | 2147483646 | 2147483647)
UNITS "0.1 dB" UNITS "0.1 dB"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The measured difference in the total power transmitted by the "The measured difference in the total power transmitted by the
xTU-R and the total power received by the xTU-C over all sub- xTU-R and the total power received by the xTU-C over all sub-
carriers during diagnostics mode and initialization. carriers during diagnostics mode and initialization.
It ranges from 0 to 1270 units of 0.1 dB (Physical values are It ranges from 0 to 1270 units of 0.1 dB (Physical values are
0 to 127 dB). A value of all 1's indicates the line 0 to 127 dB).
attenuation is out of range to be represented." A special value of 0x7FFFFFFF (2147483647) indicates the line
attenuation is out of range to be represented.
A special value of 0x7FFFFFFE (2147483646) indicates the line
attenuation measurement is currently unavailable."
REFERENCE "ITU-T G.997.1, paragraph 7.5.1.7" REFERENCE "ITU-T G.997.1, paragraph 7.5.1.7"
::= { xdsl2LineEntry 15 } ::= { xdsl2LineEntry 15 }
xdsl2LineStatusSigAttenDs OBJECT-TYPE xdsl2LineStatusSigAttenDs OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32 (0..1270 | 2147483646 | 2147483647)
UNITS "0.1 dB" UNITS "0.1 dB"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The measured difference in the total power transmitted by the "The measured difference in the total power transmitted by the
xTU-C and the total power received by the xTU-R over all sub- xTU-C and the total power received by the xTU-R over all sub-
carriers during Showtime. It ranges from 0 to 1270 units of carriers during Showtime. It ranges from 0 to 1270 units of
0.1 dB (Physical values are 0 to 127 dB). A value of all 0.1 dB (Physical values are 0 to 127 dB).
1's indicates the line attenuation is out of range to be A special value of 0x7FFFFFFF (2147483647) indicates the
represented." signal attenuation is out of range to be represented.
A special value of 0x7FFFFFFE (2147483646) indicates the
signal attenuation measurement is currently unavailable."
REFERENCE "ITU-T G.997.1, paragraph 7.5.1.8" REFERENCE "ITU-T G.997.1, paragraph 7.5.1.8"
::= { xdsl2LineEntry 16 } ::= { xdsl2LineEntry 16 }
xdsl2LineStatusSigAttenUs OBJECT-TYPE xdsl2LineStatusSigAttenUs OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32 (0..1270 | 2147483646 | 2147483647)
UNITS "0.1 dB" UNITS "0.1 dB"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The measured difference in the total power transmitted by the "The measured difference in the total power transmitted by the
xTU-R and the total power received by the xTU-C over all sub- xTU-R and the total power received by the xTU-C over all sub-
carriers during Showtime. It ranges from 0 to 1270 units of carriers during Showtime. It ranges from 0 to 1270 units of
0.1 dB (Physical values are 0 to 127 dB). A value of all 0.1 dB (Physical values are 0 to 127 dB).
1's indicates the line attenuation is out of range to be A special value of 0x7FFFFFFF (2147483647) indicates the
represented." signal attenuation is out of range to be represented.
A special value of 0x7FFFFFFE (2147483646) indicates the
signal attenuation measurement is currently unavailable."
REFERENCE "ITU-T G.997.1, paragraph 7.5.1.9" REFERENCE "ITU-T G.997.1, paragraph 7.5.1.9"
::= { xdsl2LineEntry 17 } ::= { xdsl2LineEntry 17 }
xdsl2LineStatusSnrMarginDs OBJECT-TYPE xdsl2LineStatusSnrMarginDs OBJECT-TYPE
SYNTAX Integer32 SYNTAX Integer32 (-640..630 | 2147483646 | 2147483647)
UNITS "0.1 dB" UNITS "0.1 dB"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Downstream SNR Margin is the maximum increase in dB of the "Downstream SNR Margin is the maximum increase in dB of the
noise power received at the xTU-R, such that the BER noise power received at the xTU-R, such that the BER
requirements are met for all downstream bearer channels. It requirements are met for all downstream bearer channels. It
ranges from -640 to 630 units of 0.1 dB (Physical values are ranges from -640 to 630 units of 0.1 dB (Physical values are
-64 to 63 dB). A value of all 1's indicates the line -64 to 63 dB).
attenuation is out of range to be represented." A special value of 0x7FFFFFFF (2147483647) indicates the
SNR Margin is out of range to be represented.
A special value of 0x7FFFFFFE (2147483646) indicates the
SNR Margin measurement is currently unavailable."
REFERENCE "ITU-T G.997.1, paragraph 7.5.1.10" REFERENCE "ITU-T G.997.1, paragraph 7.5.1.10"
::= { xdsl2LineEntry 18 } ::= { xdsl2LineEntry 18 }
xdsl2LineStatusSnrMarginUs OBJECT-TYPE xdsl2LineStatusSnrMarginUs OBJECT-TYPE
SYNTAX Integer32 SYNTAX Integer32 (-640..630 | 2147483646 | 2147483647)
UNITS "0.1 dB" UNITS "0.1 dB"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Upstream SNR Margin is the maximum increase in dB of the noise "Upstream SNR Margin is the maximum increase in dB of the noise
power received at the xTU-C, such that the BER requirements power received at the xTU-C, such that the BER requirements
are met for all downstream bearer channels. It ranges from are met for all downstream bearer channels. It ranges from
-640 to 630 units of 0.1 dB (Physical values are -64 to -640 to 630 units of 0.1 dB (Physical values are -64 to
63 dB). A value of all 1's indicates the line attenuation 63 dB).
is out of range to be represented." A special value of 0x7FFFFFFF (2147483647) indicates the
SNR Margin is out of range to be represented.
A special value of 0x7FFFFFFE (2147483646) indicates the
SNR Margin measurement is currently unavailable."
REFERENCE "ITU-T G.997.1, paragraph 7.5.1.11" REFERENCE "ITU-T G.997.1, paragraph 7.5.1.11"
::= { xdsl2LineEntry 19 } ::= { xdsl2LineEntry 19 }
xdsl2LineStatusAttainableRateDs OBJECT-TYPE xdsl2LineStatusAttainableRateDs OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "bits/second" UNITS "bits/second"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Maximum Attainable Data Rate Downstream. "Maximum Attainable Data Rate Downstream.
skipping to change at page 52, line 14 skipping to change at page 60, line 47
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Maximum Attainable Data Rate Upstream. "Maximum Attainable Data Rate Upstream.
The maximum upstream net data rate currently attainable by the The maximum upstream net data rate currently attainable by the
xTU-R transmitter and the xTU-C receiver, coded in bit/s." xTU-R transmitter and the xTU-C receiver, coded in bit/s."
REFERENCE "ITU-T G.997.1, paragraph 7.5.1.13" REFERENCE "ITU-T G.997.1, paragraph 7.5.1.13"
::= { xdsl2LineEntry 21 } ::= { xdsl2LineEntry 21 }
xdsl2LineStatusActPsdDs OBJECT-TYPE xdsl2LineStatusActPsdDs OBJECT-TYPE
SYNTAX Integer32 SYNTAX Integer32 (-900..0 | 2147483647)
UNITS "0.1 dB" UNITS "0.1 dB"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Actual Power Spectrum Density (PSD) Downstream. The average "Actual Power Spectrum Density (PSD) Downstream. The average
downstream transmit PSD over the sub-carriers used for downstream transmit PSD over the sub-carriers used for
downstream. It ranges from -900 to 0 units of 0.1 dB downstream. It ranges from -900 to 0 units of 0.1 dB
(Physical values are -90 to 0 dBm/Hz). A value of all 1's (Physical values are -90 to 0 dBm/Hz).
indicates the measurement is out of range to be represented." A value of 0x7FFFFFFF (2147483647) indicates the measurement
is out of range to be represented."
REFERENCE "ITU-T G.997.1, paragraph 7.5.1.14" REFERENCE "ITU-T G.997.1, paragraph 7.5.1.14"
::= { xdsl2LineEntry 22 } ::= { xdsl2LineEntry 22 }
xdsl2LineStatusActPsdUs OBJECT-TYPE xdsl2LineStatusActPsdUs OBJECT-TYPE
SYNTAX Integer32 SYNTAX Integer32 (-900..0 | 2147483647)
UNITS "0.1 dB" UNITS "0.1 dB"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Actual Power Spectrum Density (PSD) Upstream. The average "Actual Power Spectrum Density (PSD) Upstream. The average
upstream transmit PSD over the sub-carriers used for upstream. upstream transmit PSD over the sub-carriers used for upstream.
It ranges from -900 to 0 units of 0.1 dB (Physical values It ranges from -900 to 0 units of 0.1 dB (Physical values
are -90 to 0 dBm/Hz). A value of all 1's indicates the are -90 to 0 dBm/Hz).
measurement is out of range to be represented." A value of 0x7FFFFFFF (2147483647) indicates the measurement
is out of range to be represented."
REFERENCE "ITU-T G.997.1, paragraph 7.5.1.15" REFERENCE "ITU-T G.997.1, paragraph 7.5.1.15"
::= { xdsl2LineEntry 23 } ::= { xdsl2LineEntry 23 }
xdsl2LineStatusActAtpDs OBJECT-TYPE xdsl2LineStatusActAtpDs OBJECT-TYPE
SYNTAX Integer32 SYNTAX Integer32 (-310..310 | 2147483647)
UNITS "0.1 dB" UNITS "0.1 dB"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Actual Aggregate Transmit Power Downstream. The total amount "Actual Aggregate Transmit Power Downstream. The total amount
of transmit power delivered by the xTU-C at the U-C reference of transmit power delivered by the xTU-C at the U-C reference
point, at the instant of measurement. It ranges from -310 to point, at the instant of measurement. It ranges from -310 to
310 units of 0.1 dB (Physical values are -31 to 31 dBm). A 310 units of 0.1 dB (Physical values are -31 to 31 dBm).
value of all 1's indicates the measurement is out of range to A value of 0x7FFFFFFF (2147483647) indicates the measurement
be represented." is out of range to be represented."
REFERENCE "ITU-T G.997.1, paragraph 7.5.1.16" REFERENCE "ITU-T G.997.1, paragraph 7.5.1.16"
::= { xdsl2LineEntry 24 } ::= { xdsl2LineEntry 24 }
xdsl2LineStatusActAtpUs OBJECT-TYPE xdsl2LineStatusActAtpUs OBJECT-TYPE
SYNTAX Integer32 SYNTAX Integer32 (-310..310 | 2147483647)
UNITS "0.1 dB" UNITS "0.1 dB"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Actual Aggregate Transmit Power Upstream. The total amount of "Actual Aggregate Transmit Power Upstream. The total amount of
transmit power delivered by the xTU-R at the U-R transmit power delivered by the xTU-R at the U-R
reference point, at the instant of measurement. It ranges reference point, at the instant of measurement. It ranges
from -310 to 310 units of 0.1 dB (Physical values are -31 from -310 to 310 units of 0.1 dB (Physical values are -31
to 31 dBm). A value of all 1's indicates the measurement to 31 dBm).
A value of 0x7FFFFFFF (2147483647) indicates the measurement
is out of range to be represented." is out of range to be represented."
REFERENCE "ITU-T G.997.1, paragraph 7.5.1.17" REFERENCE "ITU-T G.997.1, paragraph 7.5.1.17"
::= { xdsl2LineEntry 25 } ::= { xdsl2LineEntry 25 }
------------------------------------------------ ------------------------------------------------
-- xdsl2ChannelStatusTable -- -- xdsl2ChannelStatusTable --
------------------------------------------------ ------------------------------------------------
xdsl2ChannelStatusTable OBJECT-TYPE xdsl2ChannelStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF Xdsl2ChannelStatusEntry SYNTAX SEQUENCE OF Xdsl2ChannelStatusEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table xdsl2ChannelStatusTable contains status "The table xdsl2ChannelStatusTable contains status
parameters of VDSL2/ADSL/ADSL2 or ADSL2+ channel. parameters of VDSL2/ADSL/ADSL2 or ADSL2+ channel.
This table contains live data from equipment. As such, This table contains live data from equipment. "
it is NOT persistent."
::= { xdsl2Status 1 } ::= { xdsl2Status 1 }
xdsl2ChannelStatusEntry OBJECT-TYPE xdsl2ChannelStatusEntry OBJECT-TYPE
SYNTAX Xdsl2ChannelStatusEntry SYNTAX Xdsl2ChannelStatusEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table xdsl2ChannelStatusTable contains status "The table xdsl2ChannelStatusTable contains status
parameters of VDSL2/ADSL/ADSL2 or ADSL2+ channel. parameters of VDSL2/ADSL/ADSL2 or ADSL2+ channel.
The index of this table is an interface index where The index of this table is an interface index where
the interface has an ifType value that is applicable the interface has an ifType value that is applicable
for a DSL channel and the termination unit." for a DSL channel and the termination unit."
INDEX { ifIndex, xdsl2ChStatusUnit } INDEX { ifIndex, xdsl2ChStatusUnit }
::= { adsl2ChannelStatusTable 1 } ::= { xdsl2ChannelStatusTable 1 }
Adsl2ChannelStatusEntry ::= Xdsl2ChannelStatusEntry ::=
SEQUENCE { SEQUENCE {
adsl2ChStatusUnit Xdsl2Unit, xdsl2ChStatusUnit Xdsl2Unit,
xdsl2ChStatusChannelNum Unsigned32, xdsl2ChStatusChannelNum Unsigned32,
xdsl2ChStatusActDataRate Unsigned32, xdsl2ChStatusActDataRate Unsigned32,
xdsl2ChStatusPrevDataRate Unsigned32, xdsl2ChStatusPrevDataRate Unsigned32,
xdsl2ChStatusActDelay Unsigned32, xdsl2ChStatusActDelay Unsigned32,
xdsl2ChStatusAtmStatus Xdsl2ChAtmStatus, xdsl2ChStatusAtmStatus Xdsl2ChAtmStatus,
xdsl2ChStatusPtmStatus Xdsl2ChPtmStatus xdsl2ChStatusPtmStatus Xdsl2ChPtmStatus
} }
xdsl2ChStatusUnit OBJECT-TYPE xdsl2ChStatusUnit OBJECT-TYPE
SYNTAX Xdsl2Unit SYNTAX Xdsl2Unit
skipping to change at page 55, line 35 skipping to change at page 64, line 22
::= { xdsl2ChannelStatusEntry 5 } ::= { xdsl2ChannelStatusEntry 5 }
xdsl2ChStatusAtmStatus OBJECT-TYPE xdsl2ChStatusAtmStatus OBJECT-TYPE
SYNTAX Xdsl2ChAtmStatus SYNTAX Xdsl2ChAtmStatus
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates current state (existing failures) of the DSL "Indicates current state (existing failures) of the DSL
channel in case its Data Path is ATM. This is a bit-map of channel in case its Data Path is ATM. This is a bit-map of
possible conditions. The various bit positions are: possible conditions. The various bit positions are:
noFailure(0), noDefect (0),
noCellDelineation(1), noCellDelineation(1),
lossOfCellDelineation (2). lossOfCellDelineation (2).
In case the channel is not of ATM Data Path the object is set In case the channel is not of ATM Data Path the object is set
to '0'." to '0'."
REFERENCE "ITU-T G.997.1, paragraph 7.1.4" REFERENCE "ITU-T G.997.1, paragraph 7.1.4"
::= { xdsl2ChannelStatusEntry 6 } ::= { xdsl2ChannelStatusEntry 6 }
xdsl2ChStatusPtmStatus OBJECT-TYPE xdsl2ChStatusPtmStatus OBJECT-TYPE
SYNTAX Xdsl2ChPtmStatus SYNTAX Xdsl2ChPtmStatus
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates current state (existing failures) of the DSL "Indicates current state (existing failures) of the DSL
channel in case its Data Path is PTM. This is a bit-map of channel in case its Data Path is PTM. This is a bit-map of
possible conditions. The various bit positions are: possible conditions. The various bit positions are:
noFailure(0), noDefect (0),
outOfSync (1). outOfSync (1).
In case the channel is not of PTM Data Path the object is set In case the channel is not of PTM Data Path the object is set
to '0'." to '0'."
REFERENCE "ITU-T G.997.1, paragraph 7.1.5" REFERENCE "ITU-T G.997.1, paragraph 7.1.5"
::= { xdsl2ChannelStatusEntry 7 } ::= { xdsl2ChannelStatusEntry 7 }
------------------------------------------------ ------------------------------------------------
-- Scalars that relate to the xdsl2SCStatusTable. -- Scalars that relate to the SC Status Tables
------------------------------------------------ ------------------------------------------------
xdsl2ScalarSCMaxInterfaces OBJECT-TYPE xdsl2ScalarSCMaxInterfaces OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This value determines the upper size of xdsl2SCStatusTable. "This value determines the upper size of xdsl2SCStatusTable
The maximum number of entries in xdsl2SCStatusTable is equal and xdsl2SCStatusMainTable.
to two times the value of this attribute." The maximum number of entries in the two tables is equal is
two times the value of this attribute."
::= { xdsl2ScalarSC 1 } ::= { xdsl2ScalarSC 1 }
xdsl2ScalarSCAvailInterfaces OBJECT-TYPE xdsl2ScalarSCAvailInterfaces OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This value determines the amount of space that is "This value determines the amount of space that is
currently available in xdsl2SCStatusTable. currently available in xdsl2SCStatusTable and
The number of entries available in xdsl2SCStatusTable is equal xdsl2SCStatusMainTable.
The number of entries available in the two tables is equal
to two times the value of this attribute." to two times the value of this attribute."
::= { xdsl2ScalarSC 2 } ::= { xdsl2ScalarSC 2 }
------*****************************************************
----- Should revise The following table.
----- 1. There should be a reference to the SC groups
----- 2. We should solve the issue of too long data structures
----- caused by supporting 4096 sub-carriers.
------*****************************************************
------------------------------------------------ ------------------------------------------------
-- xdsl2SCStatusTable -- -- xdsl2SCStatusMainTable --
------------------------------------------------ ------------------------------------------------
xdsl2SCStatusTable OBJECT-TYPE xdsl2SCStatusMainTable OBJECT-TYPE
SYNTAX SEQUENCE OF Xdsl2SCStatusEntry SYNTAX SEQUENCE OF Xdsl2SCStatusMainEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table xdsl2SCStatusTable contains status parameters "The table xdsl2SCStatusMainTable contains
of VDSL2/ADSL/ADSL2 and ADSL2+ sub-carriers. This table sub-carriers status parameters for VDSL2/ADSL/ADSL2
contains live data from equipment. As such, it is NOT and ADSL2+, parameters that do not refer to specific
persistent." sub-carrier. In addition, the table contains parameters
that provide information about the size of parameters
in xdsl2SCStatusTable. This table contains live data
from equipment. "
::= { xdsl2Status 2 } ::= { xdsl2Status 2 }
xdsl2SCStatusEntry OBJECT-TYPE xdsl2SCStatusMainEntry OBJECT-TYPE
SYNTAX Xdsl2SCStatusEntry SYNTAX Xdsl2SCStatusMainEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table Hfxdsl2SCStatusEntry contains status parameters "The table Hfxdsl2SCStatusMainEntry contains sub-carriers
of VDSL2/ADSL/ADSL2 and ADSL2+ sub-carriers. status parameters for VDSL2/ADSL/ADSL2 and ADSL2+, parameters
The index of this table is an interface index where the that do not refer to specific sub-carrier. In addition, the
interface has an ifType of vdsl2(xxx)." table contains parameters that provide information about the
size of parameters in xdsl2SCStatusTable.
One index of this table is an interface index where the
interface has an ifType of vdsl2(xxx). A second index of this
table is the transmission direction."
INDEX { ifIndex, xdsl2SCStatusDirection } INDEX { ifIndex, xdsl2SCStatusDirection }
::= { xdsl2SCStatusTable 1 } ::= { xdsl2SCStatusMainTable 1 }
Xdsl2SCStatusEntry ::= Xdsl2SCStatusMainEntry ::=
SEQUENCE { SEQUENCE {
xdsl2SCStatusDirection Xdsl2Direction, xdsl2SCStatusDirection Xdsl2Direction,
xdsl2SCStatusMtime Unsigned32,
xdsl2SCStatusSnr OCTET STRING,
xdsl2SCStatusBitsAlloc OCTET STRING,
xdsl2SCStatusGainAlloc OCTET STRING,
xdsl2SCStatusTssi Xdsl2Tssi,
xdsl2SCStatusLinScale Unsigned32, xdsl2SCStatusLinScale Unsigned32,
xdsl2SCStatusLinReal OCTET STRING, xdsl2SCStatusLinScGroupSize Unsigned32,
xdsl2SCStatusLinImg OCTET STRING,
xdsl2SCStatusLogMt Unsigned32, xdsl2SCStatusLogMt Unsigned32,
xdsl2SCStatusLog OCTET STRING, xdsl2SCStatusLogScGroupSize Unsigned32,
xdsl2SCStatusQlnMt Unsigned32, xdsl2SCStatusQlnMt Unsigned32,
xdsl2SCStatusQln OCTET STRING, xdsl2SCStatusQlnScGroupSize Unsigned32,
xdsl2SCStatusMtime Unsigned32,
xdsl2SCStatusSnrScGroupSize Unsigned32,
xdsl2SCStatusLnAtten Unsigned32, xdsl2SCStatusLnAtten Unsigned32,
xdsl2SCStatusSigAtten Unsigned32, xdsl2SCStatusSigAtten Unsigned32,
xdsl2SCStatusSnrMargin Integer32, xdsl2SCStatusSnrMargin Integer32,
xdsl2SCStatusAttainableRate Unsigned32, xdsl2SCStatusAttainableRate Unsigned32,
xdsl2SCStatusActAtp Integer32, xdsl2SCStatusActAtp Integer32,
xdsl2SCStatusRowStatus RowStatus xdsl2SCStatusRowStatus RowStatus
} }
xdsl2SCStatusDirection OBJECT-TYPE xdsl2SCStatusDirection OBJECT-TYPE
SYNTAX Xdsl2Direction SYNTAX Xdsl2Direction
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The direction of the sub-carrier either "The direction of the sub-carrier either
upstream or downstream" upstream or downstream"
::= { xdsl2SCStatusEntry 1 } ::= { xdsl2SCStatusMainEntry 1 }
xdsl2SCStatusMtime OBJECT-TYPE
SYNTAX Unsigned32
UNITS "symbols"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SNR Measurement Time. The number of symbols used to
measure the SNR values on the respective transmission
direction. It should correspond to the value specified in the
recommendation (e.g., the number of symbols in 1 second
time interval for G.992.3). This parameter corresponds to
1 second in loop diagnostic procedure and should be updated
otherwise"
REFERENCE "ITU-T G.997.1, paragraph 7.5.1.20.1 (SNRMTds)
and paragraph 7.5.1.20.3 (SNRMTus)"
::= { xdsl2SCStatusEntry 2 }
xdsl2SCStatusSnr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..512))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The SNR Margin per sub-carrier, expressing the ratio between
the received signal power and received noise power per
subscriber. It is an array of 512 bytes, designed for
supporting up to 512 (downstream) sub-carriers.
The number of utilized octets on downstream direction depends
on NSCds, and on upstream direction it depends on NSCus. This
value is referred here as NSC.
Byte i (0 <= i < NSC) is set to a value in the range 0 to
254 to indicate that the respective downstream or upstream sub-
carrier i has SNR of: (-32 + Xdsl2SubcarrierSnr(i)/2) in dB
(i.e., -32 to 95dB).
The special value 255 means that no measurement could be done
for the subcarrier because it is out of the PSD mask passband
or that the noise PSD is out of range to be represented.
Each value in this array is 8 bits wide."
REFERENCE "ITU-T G.997.1, paragraph 7.5.1.20.2 (SNRpsds)
and paragraph 7.5.1.20.4 (SNRpsus)"
::= { xdsl2SCStatusEntry 3 }
xdsl2SCStatusBitsAlloc OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
UNITS "bits"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bits allocation per sub-carrier. An array of 256 bytes
(512 nibbles), designed for supporting up to 512 (downstream)
sub-carriers.
The number of utilized nibbles on downstream direction depends
on NSCds, and on upstream direction it depends on NSCus. This
value is referred here as NSC.
Nibble i (0 <= i < NSC) is set to a value in the range 0
to 15 to indicate that the respective downstream or upstream
sub-carrier i has the same amount of bits allocation."
REFERENCE "ITU-T G.997.1, paragraph 7.5.1.21.1 (BITSpsds)
and paragraph 7.5.1.21.2 (BITSpsus)"
::= { xdsl2SCStatusEntry 4 }
xdsl2SCStatusGainAlloc OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..1024))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The gain allocation per sub-carrier. An array of 512 16-bits
values, designed for supporting up to 512 (downstream) sub-
carriers.
The number of utilized octets on downstream direction depends
on NSCds, and on upstream direction it depends on NSCus. This
value is referred here as NSC.
Value i (0 <= i < NSC) is in the range 0 to 4093 to indicate
that the respective downstream or upstream sub-carrier i has the
same amount of gain value.
The gain value is represented as a multiple of 1/512 on
linear scale. Each value in this array is 16 bits wide and is
stored in big endian format."
REFERENCE "ITU-T G.997.1, paragraph 7.5.1.21.3 (GAINSpsds)
and paragraph 7.5.1.21.4 (GAINSpsus)"
::= { xdsl2SCStatusEntry 5 }
xdsl2SCStatusTssi OBJECT-TYPE
SYNTAX Xdsl2Tssi
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The transmit spectrum shaping (TSSi) breakpoints expressed
as the set of breakpoints exchanged during G.994.1.
Each breakpoint is a pair of values occupying 3 octets with the
following structure:
First 2 octets - Index of the subcarrier used in the context of
the breakpoint.
Third octet - The shaping parameter at the breakpoint.
Subcarrier index is an unsigned number in the range 1 to either
NSCds (downstream direction) or NSCus (upstream direction).
The shaping parameter value is in the range 0 to 127 (units of
-0.5dB). The special value 127 indicates that the subcarrier
is not transmitted."
REFERENCE "ITU-T G.997.1, paragraph 7.5.1.21.5 (TSSpsds)
and paragraph 7.5.1.21.6 (TSSpsus)"
::= { xdsl2SCStatusEntry 6 }
xdsl2SCStatusLinScale OBJECT-TYPE xdsl2SCStatusLinScale OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The scale factor to be applied to the H(f) linear "The scale factor to be applied to the H(f) linear
representation values for the respective transmission direction. representation values for the respective transmission direction.
This parameter is only available after a loop diagnostic This parameter is only available after a loop diagnostic
procedure." procedure."
REFERENCE "ITU-T G.997.1, paragraph 7.5.1.18.1 (HLINSCds) REFERENCE "ITU-T G.997.1, paragraph 7.5.1.26.1 (HLINSCds)
and paragraph 7.5.1.18.5 (HLINSCus)" and paragraph 7.5.1.26.7 (HLINSCus)"
::= { xdsl2SCStatusEntry 7 } ::= { xdsl2SCStatusMainEntry 2 }
xdsl2SCStatusLinReal OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..1024))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An array of up to 512 complex H(f) linear representation
values in linear scale for the respective transmission
direction. It is designed to support up to 512 (downstream)
sub-carriers.
The number of utilized values on downstream direction depends
on NSCds, and on upstream direction it depends on NSCus. This
value is referred here as NSC.
Each array entry represents the real component [referred here as
a(i)] of Hlin(f = i*Df) value for a particular sub-carrier index
i (0 <= i < NSC).
Hlin(f) is represented as ((scale/2^15)*((a(i)+j*b(i))/2^15)),
where scale is Xdsl2SubcarrierLinScale and a(i) and b(i)
[provided by the Xdsl2SubcarrierLinImg object] are in the range
(-2^15+1) to (+2^15-1).
A special value a(i)=b(i)= -2^15 indicates that no measurement
could be done for the subcarrier because it is out of the
passband or that the attenuation is out of range to be
represented. This parameter is only available after a loop
diagnostic procedure.
Each value in this array is 16 bits wide and is stored in big
endian format."
REFERENCE "ITU-T G.997.1, paragraph 7.5.1.18.2 (HLINpsds)
and paragraph 7.5.1.18.6 (HLINpsds)"
::= { xdsl2SCStatusEntry 8 }
xdsl2SCStatusLinImg OBJECT-TYPE xdsl2SCStatusLinScGroupSize OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..1024)) SYNTAX Unsigned32(1 | 2 | 4 | 8)
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An array of up to 512 complex H(f) linear representation "Number of sub-carriers per group used to report the H(f)
values in linear scale for the respective transmission linear representation values for the respective transmission
direction. It is designed to support up to 512 (downstream) direction. The valid values are 1, 2, 4 and 8. For ADSL, this
sub-carriers. parameter is equal to one and, for VDSL2, it is equal to the
The number of utilized values on downstream direction depends size of a sub-carrier group used to compute these parameters.
on NSCds, and on upstream direction it depends on NSCus. This This parameter is only available after a loop diagnostic
value is referred here as NSC. procedure."
Each array entry represents the imaginary component [referred REFERENCE "ITU-T G.997.1, paragraph 7.5.1.26.2 (HLINGds)
here as b(i)] of Hlin(f = i*Df) value for a particular sub- and paragraph 7.5.1.26.8 (HLINGus)"
carrier index i (0 <= i < NSC). ::= { xdsl2SCStatusMainEntry 3 }
Hlin(f) is represented as ((scale/2^15)*((a(i)+j*b(i))/2^15)),
where scale is Xdsl2SubcarrierLinScale and a(i) [provided by
the Xdsl2SubcarrierLinReal object] and b(i) are in the range
(-2^15+1) to (+2^15-1).
A special value a(i)=b(i)= -2^15 indicates that no measurement
could be done for the subcarrier because it is out of the
passband or that the attenuation is out of range to be
represented. This parameter is only available after a loop
diagnostic procedure.
Each value in this array is 16 bits wide and is stored in big
endian format."
REFERENCE "ITU-T G.997.1, paragraph 7.5.1.18.2 (HLINpsds)
and paragraph 7.5.1.18.6 (HLINpsds)"
::= { xdsl2SCStatusEntry 9 }
xdsl2SCStatusLogMt OBJECT-TYPE xdsl2SCStatusLogMt OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of symbols used to measure the H(f) logarithmic "The number of symbols used to measure the H(f) logarithmic
measurement values for the respective transmission direction. measurement values for the respective transmission direction.
This parameter should correspond to the value specified in the This parameter should correspond to the value specified in the
recommendation (e.g., the number of symbols in 1 second recommendation (e.g., the number of symbols in 1 second
time interval for G.992.3). This parameter corresponds to 1 time interval for G.992.3). This parameter corresponds to 1
second in loop diagnostic procedure and should be updated in second in loop diagnostic procedure and should be updated in
initialization" initialization"
REFERENCE "ITU-T G.997.1, paragraph 7.5.1.18.3 (HLOGMTds) REFERENCE "ITU-T G.997.1, paragraph 7.5.1.26.4 (HLOGMTds)
and paragraph 7.5.1.18.7 (HLOGMTus)" and paragraph 7.5.1.26.10 (HLOGMTus)"
::= { xdsl2SCStatusEntry 10 } ::= { xdsl2SCStatusMainEntry 4 }
xdsl2SCStatusLog OBJECT-TYPE xdsl2SCStatusLogScGroupSize OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..1024)) SYNTAX Unsigned32(1 | 2 | 4 | 8)
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An array of up to 512 real H(f) logarithmic representation "Number of sub-carriers per group used to report the H(f)
values in dB for the respective transmission direction. It is logarithmic representation values for the respective
designed to support up to 512 (downstream) sub-carriers transmission direction. The valid values are 1, 2, 4 and 8.
The number of utilized values on downstream direction depends For ADSL, this parameter is equal to one and, for VDSL2, it is
on NSCds, and on upstream direction it depends on NSCus. This equal to the size of a sub-carrier group used to compute these
value is referred here as NSC. parameters.
Each array entry represents the real Hlog(f = i*Df) value for a This parameter is only available after a loop diagnostic
particular sub-carrier index i, (0 <= i < NSC). procedure."
The real Hlog(f) value is represented as (6-m(i)/10), with m(i) REFERENCE "ITU-T G.997.1, paragraph 7.5.1.26.5 (HLOGGds)
in the range 0 to 1022. A special value m=1023 indicates that and paragraph 7.5.1.26.11 (HLOGGus)"
no measurement could be done for the subcarrier because it is ::= { xdsl2SCStatusMainEntry 5 }
out of the passband or that the attenuation is out of range to
be represented. This parameter is applicable in loop
diagnostic procedure and initialization.
Each value in this array is 16 bits wide and is stored
in big endian format."
REFERENCE "ITU-T G.997.1, paragraph 7.5.1.18.4 (HLOGpsds)
and paragraph 7.5.1.18.8 (HLOGpsus)"
::= { xdsl2SCStatusEntry 11 }
xdsl2SCStatusQlnMt OBJECT-TYPE xdsl2SCStatusQlnMt OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of symbols used to measure the Quiet Line Noise "The number of symbols used to measure the Quiet Line Noise
values on the respective transmission direction. This values on the respective transmission direction. This
parameter should correspond to the value specified in the parameter should correspond to the value specified in the
recommendation (e.g., the number of symbols in 1 second time recommendation (e.g., the number of symbols in 1 second time
interval for G.992.3). This parameter corresponds to 1 second interval for G.992.3). This parameter corresponds to 1 second
in loop diagnostic procedure and should be updated in in loop diagnostic procedure and should be updated in
initialization " initialization "
REFERENCE "ITU-T G.997.1, paragraph 7.5.1.19.1 (QLNMTds) REFERENCE "ITU-T G.997.1, paragraph 7.5.1.27.1 (QLNMTds)
and paragraph 7.5.1.19.3 (QLNMTus)" and paragraph 7.5.1.27.4 (QLNMTus)"
::= { xdsl2SCStatusEntry 12 } ::= { xdsl2SCStatusMainEntry 6 }
xdsl2SCStatusQln OBJECT-TYPE xdsl2SCStatusQlnScGroupSize OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..512)) SYNTAX Unsigned32(1 | 2 | 4 | 8)
UNITS "dBm/Hz"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An array of up to 512 real Quiet Line Noise values in dBm/Hz "Number of sub-carriers per group used to report the Quiet
for the respective transmission direction. It is designed for Line Noise values for the respective transmission direction.
up to 512 (downstream) sub-carriers The valid values are 1, 2, 4 and 8.
The number of utilized values on downstream direction depends For ADSL, this parameter is equal to one and, for VDSL2, it is
on NSCds, and on upstream direction it depends on NSCus. This equal to the size of a sub-carrier group used to compute these
value is referred here as NSC. parameters.
Each array entry represents the QLN(f = i*Df) value for a This parameter is only available after a loop diagnostic
particular sub-carrier index i, (0 <= i < NSC). procedure."
The QLN(f) is represented as ( -23-n(i)/2), with n(i) in the REFERENCE "ITU-T G.997.1, paragraph 7.5.1.27.2 (QLNGds)
range 0 to 254. A special value n(i)=255 indicates that no and paragraph 7.5.1.27.5 (QLNGus)"
measurement could be done for the subcarrier because it is out ::= { xdsl2SCStatusMainEntry 7 }
of the passband or that the noise PSD is out of range to be
represented.
This parameter is applicable in loop diagnostic procedure and
initialization. Each value in this array is 8 bits wide."
REFERENCE "ITU-T G.997.1, paragraph 7.5.1.19.2 (QLNpsds)
and paragraph 7.5.1.19.4 (QLNpsus)"
::= { xdsl2SCStatusEntry 13 }
xdsl2SCStatusLnAtten OBJECT-TYPE xdsl2SCStatusMtime OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "symbols"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"SNR Measurement Time. The number of symbols used to
measure the SNR values on the respective transmission
direction. It should correspond to the value specified in the
recommendation (e.g., the number of symbols in 1 second
time interval for G.992.3). This parameter corresponds to
1 second in loop diagnostic procedure and should be updated
otherwise"
REFERENCE "ITU-T G.997.1, paragraph 7.5.1.28.1 (SNRMTds)
and paragraph 7.5.1.28.4 (SNRMTus)"
::= { xdsl2SCStatusMainEntry 8 }
xdsl2SCStatusSnrScGroupSize OBJECT-TYPE
SYNTAX Unsigned32(1 | 2 | 4 | 8)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Number of sub-carriers per group used to report the SNR
values on the respective transmission direction.
The valid values are 1, 2, 4 and 8.
For ADSL, this parameter is equal to one and, for VDSL2, it is
equal to the size of a sub-carrier group used to compute these
parameters.
This parameter is only available after a loop diagnostic
procedure."
REFERENCE "ITU-T G.997.1, paragraph 7.5.1.28.2 (QLNGds)
and paragraph 7.5.1.28.5 (QLNGus)"
::= { xdsl2SCStatusMainEntry 9 }
xdsl2SCStatusLnAtten OBJECT-TYPE
SYNTAX Unsigned32 (0..1270 | 2147483646 | 2147483647)
UNITS "0.1 dB" UNITS "0.1 dB"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"When referring to the downstream direction, it is the measured "When referring to the downstream direction, it is the measured
difference in the total power transmitted by the XTU-C and the difference in the total power transmitted by the XTU-C and the
total power received by the XTU-R over all sub-carriers during total power received by the XTU-R over all sub-carriers during
diagnostics mode. diagnostics mode.
When referring to the upstream direction, it is the measured When referring to the upstream direction, it is the measured
difference in the total power transmitted by the XTU-R and the difference in the total power transmitted by the XTU-R and the
total power received by the XTU-C over all sub-carriers during total power received by the XTU-C over all sub-carriers during
diagnostics mode. diagnostics mode.
It ranges from 0 to 1270 units of 0.1 dB (Physical values are It ranges from 0 to 1270 units of 0.1 dB (Physical values are
0 to 127 dB). A value of all 1's indicates the line 0 to 127 dB).
A special value of 0x7FFFFFFF (2147483647) indicates the line
attenuation is out of range to be represented. attenuation is out of range to be represented.
A special value of 0x7FFFFFFE (2147483646) indicates the line
attenuation measurement is unavailable.
This object reflects the value of the parameter following the This object reflects the value of the parameter following the
most recent DELT performed on the associated line. Once most recent DELT performed on the associated line. Once
the DELT process is over, the parameter no longer changes the DELT process is over, the parameter no longer changes
until the row is deleted or a new DELT process is initiated. " until the row is deleted or a new DELT process is initiated. "
REFERENCE "ITU-T G.997.1, paragraph 7.5.1.6 (LATNds) REFERENCE "ITU-T G.997.1, paragraph 7.5.1.6 (LATNds)
and paragraph 7.5.1.7 (LATNus)" and paragraph 7.5.1.7 (LATNus)"
::= { xdsl2SCStatusEntry 14 } ::= { xdsl2SCStatusMainEntry 10 }
xdsl2SCStatusSigAtten OBJECT-TYPE xdsl2SCStatusSigAtten OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32 (0..1270 | 2147483646 | 2147483647)
UNITS "0.1 dB" UNITS "0.1 dB"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"When referring to the downstream direction, it is the measured "When referring to the downstream direction, it is the measured
difference in the total power transmitted by the difference in the total power transmitted by the
XTU-C and the total power received by the XTU-R over all sub XTU-C and the total power received by the XTU-R over all sub
carriers during Showtime after the diagnostics mode. carriers during Showtime after the diagnostics mode.
When referring to the upstream direction, it is the measured When referring to the upstream direction, it is the measured
difference in the total power transmitted by the difference in the total power transmitted by the
XTU-R and the total power received by the XTU-C over all sub XTU-R and the total power received by the XTU-C over all sub
carriers during Showtime after the diagnostics mode. carriers during Showtime after the diagnostics mode.
It ranges from 0 to 1270 units of 0.1 dB (Physical values It ranges from 0 to 1270 units of 0.1 dB (Physical values
are 0 to 127 dB). A value of all 1's indicates the line are 0 to 127 dB).
A special value of 0x7FFFFFFF (2147483647) indicates the line
attenuation is out of range to be represented. attenuation is out of range to be represented.
A special value of 0x7FFFFFFE (2147483646) indicates the line
attenuation measurement is unavailable.
This object reflects the value of the parameter following the This object reflects the value of the parameter following the
most recent DELT performed on the associated line. Once most recent DELT performed on the associated line. Once
the DELT process is over, the parameter no longer changes the DELT process is over, the parameter no longer changes
until the row is deleted or a new DELT process is initiated. " until the row is deleted or a new DELT process is initiated. "
REFERENCE "ITU-T G.997.1, paragraph 7.5.1.8 (SATNds) REFERENCE "ITU-T G.997.1, paragraph 7.5.1.8 (SATNds)
and paragraph 7.5.1.9 (SATNus)" and paragraph 7.5.1.9 (SATNus)"
::= { xdsl2SCStatusEntry 15 } ::= { xdsl2SCStatusMainEntry 11 }
xdsl2SCStatusSnrMargin OBJECT-TYPE xdsl2SCStatusSnrMargin OBJECT-TYPE
SYNTAX Integer32 SYNTAX Integer32 (-640..630 | 2147483646 | 2147483647)
UNITS "0.1 dB" UNITS "0.1 dB"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"SNR Margin is the maximum increase in dB of the noise power "SNR Margin is the maximum increase in dB of the noise power
received at the XTU (XTU-R on downstream direction and XATU-C received at the XTU (XTU-R on downstream direction and XATU-C
on upstream direction), such that the BER requirements are met on upstream direction), such that the BER requirements are met
for all bearer channels received at the XTU. It ranges from for all bearer channels received at the XTU. It ranges from
-640 to 630 units of 0.1 dB (Physical values are -64 to -640 to 630 units of 0.1 dB (Physical values are -64 to
63 dB). A value of all 1's indicates the SNR margin is 63 dB).
out of range to be represented. A special value of 0x7FFFFFFF (2147483647) indicates the
SNR Margin is out of range to be represented.
A special value of 0x7FFFFFFE (2147483646) indicates the
SNR Margin measurement is currently unavailable.
This object reflects the value of the parameter following the This object reflects the value of the parameter following the
most recent DELT performed on the associated line. Once most recent DELT performed on the associated line. Once
the DELT process is over, the parameter no longer changes the DELT process is over, the parameter no longer changes
until the row is deleted or a new DELT process is initiated. " until the row is deleted or a new DELT process is initiated. "
REFERENCE "ITU-T G.997.1, paragraph 7.5.1.10 (SNRMds) REFERENCE "ITU-T G.997.1, paragraph 7.5.1.10 (SNRMds)
and paragraph 7.5.1.11 (SNRMus)" and paragraph 7.5.1.11 (SNRMus)"
::= { xdsl2SCStatusEntry 16 } ::= { xdsl2SCStatusMainEntry 12 }
xdsl2SCStatusAttainableRate OBJECT-TYPE xdsl2SCStatusAttainableRate OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "bits/second" UNITS "bits/second"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Maximum Attainable Data Rate. The maximum net data rate "Maximum Attainable Data Rate. The maximum net data rate
currently attainable by the XTU-C transmitter and XTU-R currently attainable by the XTU-C transmitter and XTU-R
receiver (when referring to downstream direction) or by the receiver (when referring to downstream direction) or by the
XTU-R transmitter and XTU-C receiver (when referring to XTU-R transmitter and XTU-C receiver (when referring to
upstream direction). Value is coded in bits/s. upstream direction). Value is coded in bits/s.
This object reflects the value of the parameter following the This object reflects the value of the parameter following the
most recent DELT performed on the associated line. Once most recent DELT performed on the associated line. Once
the DELT process is over, the parameter no longer changes the DELT process is over, the parameter no longer changes
until the row is deleted or a new DELT process is initiated. " until the row is deleted or a new DELT process is initiated. "
REFERENCE "ITU-T G.997.1, paragraph 7.5.1.12 (ATTNDRds) REFERENCE "ITU-T G.997.1, paragraph 7.5.1.12 (ATTNDRds)
and paragraph 7.5.1.13 (ATTNDRus)" and paragraph 7.5.1.13 (ATTNDRus)"
::= { xdsl2SCStatusEntry 17 } ::= { xdsl2SCStatusMainEntry 13 }
xdsl2SCStatusActAtp OBJECT-TYPE xdsl2SCStatusActAtp OBJECT-TYPE
SYNTAX Integer32 SYNTAX Integer32
UNITS "0.1 dB" UNITS "0.1 dB"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Actual Aggregate Transmit Power from the XTU (XTU-R on "Actual Aggregate Transmit Power from the XTU (XTU-R on
downstream direction and XTU-C on upstream direction), at the downstream direction and XTU-C on upstream direction), at the
instant of measurement. It ranges from -310 to 310 units of instant of measurement. It ranges from -310 to 310 units of
0.1 dB (Physical values are -31 to 31 dBm). A value of all 0.1 dB (Physical values are -31 to 31 dBm). A value of all
1's indicates the measurement is out of range to be 1's indicates the measurement is out of range to be
represented. represented.
This object reflects the value of the parameter following the This object reflects the value of the parameter following the
most recent DELT performed on the associated line. Once most recent DELT performed on the associated line. Once
the DELT process is over, the parameter no longer changes the DELT process is over, the parameter no longer changes
until the row is deleted or a new DELT process is initiated. " until the row is deleted or a new DELT process is initiated. "
REFERENCE "ITU-T G.997.1, paragraph 7.5.1.14 (ACTPSDds) REFERENCE "ITU-T G.997.1, paragraph 7.5.1.16 (ACTATPds)
and paragraph 7.5.1.15 (ACTPSDus)" and paragraph 7.5.1.17 (ACTATPus)"
::= { xdsl2SCStatusEntry 18 } ::= { xdsl2SCStatusMainEntry 14 }
xdsl2SCStatusRowStatus OBJECT-TYPE xdsl2SCStatusRowStatus OBJECT-TYPE
SYNTAX RowStatus SYNTAX RowStatus
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Row Status. The SNMP agent should create a row in this "Row Status. The SNMP agent should create rows in this
table for storing the results of a DELT performed on the table and in the xdsl2SCStatusTable for storing the results
associated line, if such a row does not already exist. of a DELT performed on the associated line, if such rows
do not already exist.
The SNMP agent may have limited resources; therefore, if The SNMP agent may have limited resources; therefore, if
multiple rows co-exist in the table, it may fail to add multiple rows co-exist in the table, it may fail to add
new rows to the table or allocate memory resources for a new new rows to the two tables or allocate memory resources for
DELT process. If that occurs, the SNMP agent responds with a new DELT process. If that occurs, the SNMP agent responds with
either the value 'tableFull' or the value either the value 'tableFull' or the value
'noResources' (for xdsl2LineCmndConfLdsfFailReason 'noResources' (for xdsl2LineCmndConfLdsfFailReason
object in xdsl2LineTable) object in xdsl2LineTable)
The management system (the operator) may delete rows according The management system (the operator) may delete rows according
to any scheme. E.g., after retrieving the results." to any scheme. E.g., after retrieving the results."
::= { xdsl2SCStatusEntry 19 } ::= { xdsl2SCStatusMainEntry 15 }
------------------------------------------------
-- xdsl2SCStatusTable --
------------------------------------------------
xdsl2SCStatusTable OBJECT-TYPE
SYNTAX SEQUENCE OF Xdsl2SCStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table xdsl2SCStatusTable contains status parameters
of VDSL2/ADSL/ADSL2 and ADSL2+ sub-carriers. This table
contains live data from equipment. "
::= { xdsl2Status 3 }
xdsl2SCStatusEntry OBJECT-TYPE
SYNTAX Xdsl2SCStatusEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The table Hfxdsl2SCStatusEntry contains status parameters
of VDSL2/ADSL/ADSL2 and ADSL2+ sub-carriers.
One index of this table is an interface index where the
interface has an ifType of vdsl2(xxx). A second index of this
table is the transmission direction. A third index identifies
the specific segment of the sub-carriers status addressed."
INDEX { ifIndex, xdsl2SCStatusDirection, xdsl2SCStatusSegment }
::= { xdsl2SCStatusTable 1 }
Xdsl2SCStatusEntry ::=
SEQUENCE {
xdsl2SCStatusSegment Unsigned32,
xdsl2SCStatusLinReal OCTET STRING,
xdsl2SCStatusLinImg OCTET STRING,
xdsl2SCStatusLog OCTET STRING,
xdsl2SCStatusQln OCTET STRING,
xdsl2SCStatusSnr OCTET STRING,
xdsl2SCStatusBitsAlloc OCTET STRING,
xdsl2SCStatusGainAlloc OCTET STRING,
xdsl2SCStatusTssi Xdsl2Tssi
}
xdsl2SCStatusSegment OBJECT-TYPE
SYNTAX Unsigned32(1..8)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The segment of the sub-carriers
status information provided by this
row.
Several status parameters in this table
are retrieved in segments. The first segment
of the status information is retrieved with
xdsl2SCStatusSegment=1, the second segment
is retrieved with xdsl2SCStatusSegment=2, and
so on. When any status parameter is retrieved
in n segments where n<8) then, for that
parameter, GET operations for the rest segment
numbers (n+1 to 8) are responded with a value
that indicates: No measurement could be done."
::= { xdsl2SCStatusEntry 1 }
xdsl2SCStatusLinReal OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..1024))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An array of up to 512 complex H(f) linear representation
values in linear scale for the respective transmission
direction. It is designed to support up to 512 (downstream)
sub-carriers groups and can be retrieved in a single segment.
The number of utilized values on downstream direction depends
on NSds, and on upstream direction it depends on NSus. This
value is referred here as NS.
Each array entry represents the real component [referred here as
a(i)] of Hlin(f = i*Df) value for a particular sub-carrier group
index i (0 <= i < NS).
Hlin(f) is represented as ((scale/2^15)*((a(i)+j*b(i))/2^15)),
where scale is Xdsl2SubcarrierLinScale and a(i) and b(i)
[provided by the Xdsl2SubcarrierLinImg object] are in the range
(-2^15+1) to (+2^15-1).
A special value a(i)=b(i)= -2^15 indicates that no measurement
could be done for the sub-carriers group because it is out of
the passband or that the attenuation is out of range to be
represented. This parameter is only available after a loop
diagnostic procedure.
Each value in this array is 16 bits wide and is stored in big
endian format."
REFERENCE "ITU-T G.997.1, paragraph 7.5.1.26.3 (HLINpsds)
and paragraph 7.5.1.26.9 (HLINpsus)"
::= { xdsl2SCStatusEntry 2 }
xdsl2SCStatusLinImg OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..1024))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An array of up to 512 complex H(f) linear representation
values in linear scale for the respective transmission
direction. It is designed to support up to 512 (downstream)
sub-carriers groups and can be retrieved in a single segment.
The number of utilized values on downstream direction depends
on NSds, and on upstream direction it depends on NSus. This
value is referred here as NS.
Each array entry represents the imaginary component [referred
here as b(i)] of Hlin(f = i*Df) value for a particular sub-
carrier group index i (0 <= i < NS).
Hlin(f) is represented as ((scale/2^15)*((a(i)+j*b(i))/2^15)),
where scale is Xdsl2SubcarrierLinScale and a(i) [provided by
the Xdsl2SubcarrierLinReal object] and b(i) are in the range
(-2^15+1) to (+2^15-1).
A special value a(i)=b(i)= -2^15 indicates that no measurement
could be done for the sub-carriers group because it is out of
the passband or that the attenuation is out of range to be
represented. This parameter is only available after a loop
diagnostic procedure.
Each value in this array is 16 bits wide and is stored in big
endian format."
REFERENCE "ITU-T G.997.1, paragraph 7.5.1.26.3 (HLINpsds)
and paragraph 7.5.1.26.9 (HLINpsus)"
::= { xdsl2SCStatusEntry 3 }
xdsl2SCStatusLog OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..1024))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An array of up to 512 real H(f) logarithmic representation
values in dB for the respective transmission direction. It is
designed to support up to 512 (downstream) sub-carriers groups
and can be retrieved in a single segment.
The number of utilized values on downstream direction depends
on NSds, and on upstream direction it depends on NSus. This
value is referred here as NS.
Each array entry represents the real Hlog(f = i*Df) value for a
particular sub-carrier group index i, (0 <= i < NS).
The real Hlog(f) value is represented as (6-m(i)/10), with m(i)
in the range 0 to 1022. A special value m=1023 indicates that
no measurement could be done for the sub-carrier group because
it is out of the passband or that the attenuation is out of
range to be represented. This parameter is applicable in loop
diagnostic procedure and initialization.
Each value in this array is 16 bits wide and is stored
in big endian format."
REFERENCE "ITU-T G.997.1, paragraph 7.5.1.26.6 (HLOGpsds)
and paragraph 7.5.1.26.12 (HLOGpsus)"
::= { xdsl2SCStatusEntry 4 }
xdsl2SCStatusQln OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..512))
UNITS "dBm/Hz"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"An array of up to 512 real Quiet Line Noise values in dBm/Hz
for the respective transmission direction. It is designed for
up to 512 (downstream) sub-carriers groups and can be retrieved
in a single segment.
The number of utilized values on downstream direction depends
on NSds, and on upstream direction it depends on NSus. This
value is referred here as NS.
Each array entry represents the QLN(f = i*Df) value for a
particular sub-carrier index i, (0 <= i < NS).
The QLN(f) is represented as ( -23-n(i)/2), with n(i) in the
range 0 to 254. A special value n(i)=255 indicates that no
measurement could be done for the sub-carrier group because it
is out of the passband or that the noise PSD is out of range
to be represented.
This parameter is applicable in loop diagnostic procedure and
initialization. Each value in this array is 8 bits wide."
REFERENCE "ITU-T G.997.1, paragraph 7.5.1.27.3 (QLNpsds)
and paragraph 7.5.1.27.6 (QLNpsus)"
::= { xdsl2SCStatusEntry 5 }
xdsl2SCStatusSnr OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..512))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The SNR Margin per sub-carrier group, expressing the
ratio between the received signal power and received noise
power per sub-scriber group. It is an array of 512 octets,
designed for supporting up to 512 (downstream) sub-carriers
groups and can be retrieved in a single segment.
The number of utilized octets on downstream direction depends
on NSds, and on upstream direction it depends on NSus. This
value is referred here as NS.
Octet i (0 <= i < NS) is set to a value in the range 0 to
254 to indicate that the respective downstream or upstream sub-
carrier group i has SNR of: (-32 + Xdsl2SubcarrierSnr(i)/2)
in dB (i.e., -32 to 95dB).
The special value 255 means that no measurement could be done
for the sub-carrier group because it is out of the PSD mask
passband or that the noise PSD is out of range to be
represented. Each value in this array is 8 bits wide."
REFERENCE "ITU-T G.997.1, paragraph 7.5.1.28.3 (SNRpsds)
and paragraph 7.5.1.28.6 (SNRpsus)"
::= { xdsl2SCStatusEntry 6 }
xdsl2SCStatusBitsAlloc OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..256))
UNITS "bits"
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The bits allocation per sub-carrier. An array of 256 octets
(512 nibbles), designed for supporting up to 512 (downstream)
sub-carriers. When more then 512 sub-carriers are supported,
the status information is reported through multiple (up to 8)
segments. The first segment is then used for the first 512
sub-carriers. The second segment is used for the sub-carriers
512 to 1023 and so on.
The aggregate number of utilized nibbles on downstream direction
(in all segments) depends on NSds, and on upstream direction it
depends on NSus.
This value is referred here as NS. The segment number is in
xdsl2SCStatusSegment.
Nibble i (0 <= i < MIN(NS-(segment-1)*512,512)) in each
segment is set to a value in the range 0 to 15 to indicate that
the respective downstream or upstream sub-carrier j
(j=(segement-1)*512+i) has the same amount of bits allocation."
REFERENCE "ITU-T G.997.1, paragraph 7.5.1.29.1 (BITSpsds)
and paragraph 7.5.1.29.2 (BITSpsus)"
::= { xdsl2SCStatusEntry 7 }
xdsl2SCStatusGainAlloc OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..1024))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The gain allocation per sub-carrier. An array of 512 16-bits
values, designed for supporting up to 512 (downstream) sub-
carriers. When more then 512 sub-carriers are supported,
the status information is reported through multiple (up to 8)
segments. The first segment is then used for the first 512
sub-carriers. The second segment is used for the sub-carriers
512 to 1023 and so on.
The aggregate number of utilized octets on downstream direction
depends on NSds, and on upstream direction it depends on NSus.
This value is referred here as NS. The segment number is in
xdsl2SCStatusSegment.
Value i (0 <= i < MIN(NS-(segment-1)*512,512)) in each
segment is set to a value in the range 0 to 4093 to indicate
that the respective downstream or upstream sub-carrier j
(j=(segement-1)*512+i) has the same amount of gain value.
The gain value is represented as a multiple of 1/512 on
linear scale. Each value in this array is 16 bits wide and is
stored in big endian format."
REFERENCE "ITU-T G.997.1, paragraph 7.5.1.29.3 (GAINSpsds)
and paragraph 7.5.1.29.4 (GAINSpsus)"
::= { xdsl2SCStatusEntry 8 }
xdsl2SCStatusTssi OBJECT-TYPE
SYNTAX Xdsl2Tssi
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The transmit spectrum shaping (TSSi) breakpoints expressed
as the set of breakpoints exchanged during G.994.1.
Each breakpoint is a pair of values occupying 3 octets with the
following structure:
First 2 octets - Index of the subcarrier used in the context of
the breakpoint.
Third octet - The shaping parameter at the breakpoint.
Subcarrier index is an unsigned number in the range 1 to either
NSCds (downstream direction) or NSCus (upstream direction).
The shaping parameter value is in the range 0 to 127 (units of
-0.5dB). The special value 127 indicates that the subcarrier
is not transmitted."
REFERENCE "ITU-T G.997.1, paragraph 7.5.1.29.5 (TSSpsds)
and paragraph 7.5.1.29.6 (TSSpsus)"
::= { xdsl2SCStatusEntry 9 }
------------------------------------------------ ------------------------------------------------
-- xdsl2LineInventoryTable -- -- xdsl2LineInventoryTable --
------------------------------------------------ ------------------------------------------------
xdsl2LineInventoryTable OBJECT-TYPE xdsl2LineInventoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF Xdsl2LineInventoryEntry SYNTAX SEQUENCE OF Xdsl2LineInventoryEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table xdsl2LineInventoryTable contains inventory of DSL "The table xdsl2LineInventoryTable contains inventory of DSL
termination unit. termination unit. "
The objects in this table are NOT persistent."
::= { xdsl2Inventory 1 } ::= { xdsl2Inventory 1 }
xdsl2LineInventoryEntry OBJECT-TYPE xdsl2LineInventoryEntry OBJECT-TYPE
SYNTAX Xdsl2LineInventoryEntry SYNTAX Xdsl2LineInventoryEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table xdsl2LineInventoryTable contains inventory of DSL "The table xdsl2LineInventoryTable contains inventory of DSL
termination unit. termination unit.
The index of this table is an interface index where the The index of this table is an interface index where the
skipping to change at page 66, line 41 skipping to change at page 78, line 35
INDEX { ifIndex, xdsl2LInvUnit } INDEX { ifIndex, xdsl2LInvUnit }
::= { xdsl2LineInventoryTable 1 } ::= { xdsl2LineInventoryTable 1 }
Xdsl2LineInventoryEntry ::= Xdsl2LineInventoryEntry ::=
SEQUENCE { SEQUENCE {
xdsl2LInvUnit Xdsl2Unit, xdsl2LInvUnit Xdsl2Unit,
xdsl2LInvG994VendorId OCTET STRING, xdsl2LInvG994VendorId OCTET STRING,
xdsl2LInvSystemVendorId OCTET STRING, xdsl2LInvSystemVendorId OCTET STRING,
xdsl2LInvVersionNumber OCTET STRING, xdsl2LInvVersionNumber OCTET STRING,
xdsl2LInvSerialNumber OCTET STRING, xdsl2LInvSerialNumber OCTET STRING,
xdsl2LInvSelfTestResult OCTET STRING, xdsl2LInvSelfTestResult Unsigned32,
xdsl2LInvTransmissionCapabilities Xdsl2TransmissionModeType xdsl2LInvTransmissionCapabilities Xdsl2TransmissionModeType
} }
xdsl2LInvUnit OBJECT-TYPE xdsl2LInvUnit OBJECT-TYPE
SYNTAX Xdsl2Unit SYNTAX Xdsl2Unit
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The termination unit xtuc{1} or xtur{2}." "The termination unit xtuc{1} or xtur{2}."
::= { xdsl2LineInventoryEntry 1 } ::= { xdsl2LineInventoryEntry 1 }
skipping to change at page 67, line 4 skipping to change at page 78, line 46
xdsl2LInvTransmissionCapabilities Xdsl2TransmissionModeType xdsl2LInvTransmissionCapabilities Xdsl2TransmissionModeType
} }
xdsl2LInvUnit OBJECT-TYPE xdsl2LInvUnit OBJECT-TYPE
SYNTAX Xdsl2Unit SYNTAX Xdsl2Unit
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The termination unit xtuc{1} or xtur{2}." "The termination unit xtuc{1} or xtur{2}."
::= { xdsl2LineInventoryEntry 1 } ::= { xdsl2LineInventoryEntry 1 }
xdsl2LInvG994VendorId OBJECT-TYPE xdsl2LInvG994VendorId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..8)) SYNTAX OCTET STRING (SIZE(8))
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The ATU G.994.1 Vendor ID as inserted in the G.994.1 CL/CLR "The ATU G.994.1 Vendor ID as inserted in the G.994.1 CL/CLR
message. It consists of 8 binary octets, including a country message. It consists of 8 binary octets, including a country
code followed by a (regionally allocated) provider code, as code followed by a (regionally allocated) provider code, as
defined in Recommendation T.35." defined in Recommendation T.35."
REFERENCE "ITU-T G.997.1, paragraph 7.4" REFERENCE "ITU-T G.997.1, paragraph 7.4"
::= { xdsl2LineInventoryEntry 2 } ::= { xdsl2LineInventoryEntry 2 }
xdsl2LInvSystemVendorId OBJECT-TYPE xdsl2LInvSystemVendorId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..8)) SYNTAX OCTET STRING (SIZE(8))
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The ATU System Vendor ID (identifies the XTU system "The ATU System Vendor ID (identifies the XTU system
integrator) as inserted in the Overhead Messages (both XTUs integrator) as inserted in the Overhead Messages (both XTUs
for G.992.3 and G.992.4) or in the Embedded Operations for G.992.3 and G.992.4) or in the Embedded Operations
Channel (only XTU-R in G.992.1 and G.992.2). It consists of Channel (only XTU-R in G.992.1 and G.992.2). It consists of
8 binary octets, with same format as used for 8 binary octets, with same format as used for
Xdsl2InvG994VendorId." Xdsl2InvG994VendorId."
REFERENCE "ITU-T G.997.1, paragraph 7.4" REFERENCE "ITU-T G.997.1, paragraph 7.4"
skipping to change at page 68, line 8 skipping to change at page 79, line 51
DESCRIPTION DESCRIPTION
"The XTU serial number (vendor specific information) as "The XTU serial number (vendor specific information) as
inserted in the Overhead Messages (both XTUs for G.992.3 and inserted in the Overhead Messages (both XTUs for G.992.3 and
G.992.4) or in the Embedded Operations Channel (only XTU-R in G.992.4) or in the Embedded Operations Channel (only XTU-R in
G.992.1 and G.992.2). It is vendor specific information. It G.992.1 and G.992.2). It is vendor specific information. It
consists of up to 32 ASCII characters." consists of up to 32 ASCII characters."
REFERENCE "ITU-T G.997.1, paragraph 7.4" REFERENCE "ITU-T G.997.1, paragraph 7.4"
::= { xdsl2LineInventoryEntry 5 } ::= { xdsl2LineInventoryEntry 5 }
xdsl2LInvSelfTestResult OBJECT-TYPE xdsl2LInvSelfTestResult OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..4)) SYNTAX Unsigned32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The XTU self-test result, coded as a 32-bit integer. The "The XTU self-test result, coded as a 32-bit value. The
most significant octet of this object is '0' if the self-test most significant octet of the result is '0' if the self-test
passed, and '1' if the self-test failed. The interpretation passed, and '1' if the self-test failed. The interpretation
of the other octets is vendor discretionary." of the other octets is vendor discretionary."
REFERENCE "ITU-T G.997.1, paragraph 7.4" REFERENCE "ITU-T G.997.1, paragraph 7.4"
::= { xdsl2LineInventoryEntry 6 } ::= { xdsl2LineInventoryEntry 6 }
xdsl2LInvTransmissionCapabilities OBJECT-TYPE xdsl2LInvTransmissionCapabilities OBJECT-TYPE
SYNTAX Xdsl2TransmissionModeType SYNTAX Xdsl2TransmissionModeType
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
skipping to change at page 74, line 47 skipping to change at page 86, line 41
xdsl2LConfTempRowStatus OBJECT-TYPE xdsl2LConfTempRowStatus OBJECT-TYPE
SYNTAX RowStatus SYNTAX RowStatus
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object is used to create a new row or to modify or "This object is used to create a new row or to modify or
delete an existing row in this table. delete an existing row in this table.
A template is activated by setting this object to 'active'. A template is activated by setting this object to 'active'.
When 'active' is set, the system will validate the template. When 'active' is set, the system will validate the template.
Template modification is prohibited while this object is set
to 'active'.
Before a template can be deleted or taken out of service Before a template can be deleted or taken out of service
(by setting this object to 'destroy' or 'notInService'), (by setting this object to 'destroy' or 'notInService'),
it must be first unreferenced from all associated it must be first unreferenced from all associated
lines." lines."
::= { xdsl2LineConfTemplateEntry 15 } ::= { xdsl2LineConfTemplateEntry 15 }
------------------------------------------ ------------------------------------------
-- xdsl2LineConfProfTable -- -- xdsl2LineConfProfTable --
------------------------------------------ ------------------------------------------
skipping to change at page 75, line 42 skipping to change at page 87, line 35
always exist and its parameters will be set to vendor-specific always exist and its parameters will be set to vendor-specific
values, unless otherwise specified in this document" values, unless otherwise specified in this document"
INDEX { xdsl2LConfProfProfileName } INDEX { xdsl2LConfProfProfileName }
::= { xdsl2LineConfProfTable 1 } ::= { xdsl2LineConfProfTable 1 }
Xdsl2LineConfProfEntry ::= Xdsl2LineConfProfEntry ::=
SEQUENCE { SEQUENCE {
xdsl2LConfProfProfileName SnmpAdminString, xdsl2LConfProfProfileName SnmpAdminString,
xdsl2LConfProfScMaskDs Xdsl2ScMaskDs, xdsl2LConfProfScMaskDs Xdsl2ScMaskDs,
xdsl2LConfProfScMaskUs Xdsl2ScMaskUs, xdsl2LConfProfScMaskUs Xdsl2ScMaskUs,
xdsl2LConfProfRfiBandsDs Xdsl2RfiDs, xdsl2LConfProfVdsl2CarMask Xdsl2CarMask,
xdsl2LConfProfRfiBands Xdsl2RfiDs,
xdsl2LConfProfRaModeDs Xdsl2RaMode, xdsl2LConfProfRaModeDs Xdsl2RaMode,
xdsl2LConfProfRaModeUs Xdsl2RaMode, xdsl2LConfProfRaModeUs Xdsl2RaMode,
xdsl2LConfProfRaUsNrmDs Unsigned32, xdsl2LConfProfRaUsNrmDs Unsigned32,
xdsl2LConfProfRaUsNrmUs Unsigned32, xdsl2LConfProfRaUsNrmUs Unsigned32,
xdsl2LConfProfRaUsTimeDs Unsigned32, xdsl2LConfProfRaUsTimeDs Unsigned32,
xdsl2LConfProfRaUsTimeUs Unsigned32, xdsl2LConfProfRaUsTimeUs Unsigned32,
xdsl2LConfProfRaDsNrmsDs Unsigned32, xdsl2LConfProfRaDsNrmsDs Unsigned32,
xdsl2LConfProfRaDsNrmsUs Unsigned32, xdsl2LConfProfRaDsNrmsUs Unsigned32,
xdsl2LConfProfRaDsTimeDs Unsigned32, xdsl2LConfProfRaDsTimeDs Unsigned32,
xdsl2LConfProfRaDsTimeUs Unsigned32, xdsl2LConfProfRaDsTimeUs Unsigned32,
xdsl2LConfProfTargetSnrmDs Unsigned32, xdsl2LConfProfTargetSnrmDs Unsigned32,
xdsl2LConfProfTargetSnrmUs Unsigned32, xdsl2LConfProfTargetSnrmUs Unsigned32,
xdsl2LConfProfMaxSnrmDs Unsigned32, xdsl2LConfProfMaxSnrmDs Unsigned32,
xdsl2LConfProfMaxSnrmUs Unsigned32, xdsl2LConfProfMaxSnrmUs Unsigned32,
xdsl2LConfProfMinSnrmDs Unsigned32, xdsl2LConfProfMinSnrmDs Unsigned32,
xdsl2LConfProfMinSnrmUs Unsigned32, xdsl2LConfProfMinSnrmUs Unsigned32,
xdsl2LConfProfMsgMinUs Unsigned32, xdsl2LConfProfMsgMinUs Unsigned32,
xdsl2LConfProfMsgMinDs Unsigned32, xdsl2LConfProfMsgMinDs Unsigned32,
xdsl2LConfProfXtuTransSysEna Xdsl2TransmissionModeType, xdsl2LConfProfXtuTransSysEna Xdsl2TransmissionModeType,
xdsl2LConfProfPmMode Xdsl2LConfProfPmMode, xdsl2LConfProfPmMode Xdsl2LinePmMode,
xdsl2LConfProfL0Time Unsigned32, xdsl2LConfProfL0Time Unsigned32,
xdsl2LConfProfL2Time Unsigned32, xdsl2LConfProfL2Time Unsigned32,
xdsl2LConfProfL2Atpr Unsigned32, xdsl2LConfProfL2Atpr Unsigned32,
xdsl2LConfProfL2Atprt Unsigned32, xdsl2LConfProfL2Atprt Unsigned32,
xdsl2LConfProfProfiles Xdsl2LineProfiles,
xdsl2LConfProfDpboEPsd Xdsl2PsdMaskDs,
xdsl2LConfProfDpboEsEL Unsigned32,
xdsl2LConfProfUs0Mask Xdsl2LineUs0Mask,
xdsl2LConfProfRowStatus RowStatus xdsl2LConfProfRowStatus RowStatus
} }
xdsl2LConfProfProfileName OBJECT-TYPE xdsl2LConfProfProfileName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32)) SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object identifies a row in this table." "This object identifies a row in this table."
::= { xdsl2LineConfProfEntry 1 } ::= { xdsl2LineConfProfEntry 1 }
skipping to change at page 77, line 15 skipping to change at page 89, line 12
up to 4096 downstream sub-carriers, depending on NSCds. If up to 4096 downstream sub-carriers, depending on NSCds. If
bit i (0 <= i < NSCus) is set to '1', the respective bit i (0 <= i < NSCus) is set to '1', the respective
upstream sub-carrier i is masked, and if set to '0', the upstream sub-carrier i is masked, and if set to '0', the
respective sub-carrier is unmasked. Note that there respective sub-carrier is unmasked. Note that there
should always be unmasked sub-carriers (i.e., the object should always be unmasked sub-carriers (i.e., the object
cannot be all 1's). Also note that if NSCus < cannot be all 1's). Also note that if NSCus <
4096, all bits i (NSCus < i <= 4096) should be set to '1'." 4096, all bits i (NSCus < i <= 4096) should be set to '1'."
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.2.7" REFERENCE "ITU-T G.997.1, paragraph 7.3.1.2.7"
::= { xdsl2LineConfProfEntry 3 } ::= { xdsl2LineConfProfEntry 3 }
xdsl2LConfProfRfiBandsDs OBJECT-TYPE xdsl2LConfProfVdsl2CarMask OBJECT-TYPE
SYNTAX Xdsl2CarMask
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"(VDSL2-CARMASK).
VDSL2 specific Sub-carriers mask. This configuration
parameter defines the restrictions, additional to the band
plan, to determine the set of subcarriers allowed for
transmission in both upstream and downstream directions.
The parameter shall describe the not masked subcarriers as
one or more frequency bands. Each band is represented by
start and stop subcarrier indices with a subcarrier
spacing of 4.3125kHz. The valid range of subcarrier indices
run from 0 to at least the index of the highest allowed
subcarrier in both transmission directions among all
profiles enabled by the parameter xdsl2LconfProfProfiles.
Up to 32 bands may be specified. Other subcarriers shall
be masked."
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.2.8"
::= { xdsl2LineConfProfEntry 4 }
xdsl2LConfProfRfiBands OBJECT-TYPE
SYNTAX Xdsl2RfiDs SYNTAX Xdsl2RfiDs
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
------************************************************
------Modify the description and syntax to breakpoints
------************************************************
"The subset of downstream PSD mask breakpoints that shall be "The subset of downstream PSD mask breakpoints that shall be
used to notch an RFI band. used to notch an RFI band.
The specific interpolation around these points is defined in The specific interpolation around these points is defined in
G.992.5. It is a bitmap of 4096 bits that allows referring to G.992.5. It is a bitmap of 4096 bits that allows referring to
up to 4096 downstream sub-carriers, depending on NSCds. If up to 4096 downstream sub-carriers, depending on NSCds. If
bit i (0 <= i < NSCds) is set to '1', the respective bit i (0 <= i < NSCds) is set to '1', the respective
downstream sub-carrier i is part of a notch filter, and if downstream sub-carrier i is part of a notch filter, and if
set to '0', the respective sub-carrier is not set to '0', the respective sub-carrier is not
part of a notch filter. part of a notch filter.
This information complements the specification provided by This information complements the specification provided by
xdsl2LconfProfPsdMaskDs. xdsl2LconfProfPsdMaskDs.
Note that if NSCds < 4096, all bits i (NSCds<i< 4096) Note that if NSCds < 4096, all bits i (NSCds<i< 4096)
should be set to '0'. " should be set to '0'. "
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.2.9" REFERENCE "ITU-T G.997.1, paragraph 7.3.1.2.10"
::= { xdsl2LineConfProfEntry 4 } ::= { xdsl2LineConfProfEntry 5 }
xdsl2LConfProfRaModeDs OBJECT-TYPE xdsl2LConfProfRaModeDs OBJECT-TYPE
SYNTAX Xdsl2RaMode SYNTAX Xdsl2RaMode
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The mode of operation of a rate-adaptive xTU-C in the transmit "The mode of operation of a rate-adaptive xTU-C in the transmit
direction. The parameter can take three values: direction. The parameter can take three values:
manual (1), manual (1),
raInit (2), raInit (2),
dynamicRa (3)." dynamicRa (3)."
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.4.1" REFERENCE "ITU-T G.997.1, paragraph 7.3.1.4.1"
DEFVAL { manual } DEFVAL { manual }
::= { xdsl2LineConfProfEntry 5 } ::= { xdsl2LineConfProfEntry 6 }
xdsl2LConfProfRaModeUs OBJECT-TYPE xdsl2LConfProfRaModeUs OBJECT-TYPE
SYNTAX Xdsl2RaMode SYNTAX Xdsl2RaMode
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The mode of operation of a rate-adaptive xTU-R in the transmit "The mode of operation of a rate-adaptive xTU-R in the transmit
direction. The parameter can take three values: direction. The parameter can take three values:
manual (1), manual (1),
raInit (2), raInit (2),
dynamicRa (3)." dynamicRa (3)."
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.4.2" REFERENCE "ITU-T G.997.1, paragraph 7.3.1.4.2"
DEFVAL { manual } DEFVAL { manual }
::= { xdsl2LineConfProfEntry 6 } ::= { xdsl2LineConfProfEntry 7 }
xdsl2LConfProfRaUsNrmDs OBJECT-TYPE xdsl2LConfProfRaUsNrmDs OBJECT-TYPE
SYNTAX Unsigned32(0..310) SYNTAX Unsigned32(0..310)
UNITS "0.1 dB" UNITS "0.1 dB"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The Downstream Up-Shift Noise Margin value, to be used when "The Downstream Up-Shift Noise Margin value, to be used when
Xdsl2LineConfRaModeDs is set to DynamicRa. If the downstream Xdsl2LineConfRaModeDs is set to dynamicRa. If the downstream
noise margin is above this value and stays above it for noise margin is above this value and stays above it for
more than the time specified by the Xdsl2LineConfRaUsTimeDs, more than the time specified by the Xdsl2LineConfRaUsTimeDs,
the xTU-R shall attempt to increase the downstream net data the xTU-R shall attempt to increase the downstream net data
rate. The Downstream Up-shift Noise Margin ranges from 0 to rate. The Downstream Up-shift Noise Margin ranges from 0 to
310 units of 0.1 dB (Physical values are 0 to 31 dB)." 310 units of 0.1 dB (Physical values are 0 to 31 dB)."
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.4.3" REFERENCE "ITU-T G.997.1, paragraph 7.3.1.4.3"
DEFVAL { 10 } DEFVAL { 10 }
::= { xdsl2LineConfProfEntry 7 } ::= { xdsl2LineConfProfEntry 8 }
xdsl2LConfProfRaUsNrmUs OBJECT-TYPE xdsl2LConfProfRaUsNrmUs OBJECT-TYPE
SYNTAX Unsigned32(0..310) SYNTAX Unsigned32(0..310)
UNITS "0.1 dB" UNITS "0.1 dB"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The Upstream Up-Shift Noise Margin value, to be used when "The Upstream Up-Shift Noise Margin value, to be used when
Xdsl2LineConfRaModeUs is set to DynamicRa. If the upstream Xdsl2LineConfRaModeUs is set to dynamicRa. If the upstream
noise margin is above this value and stays above it for more noise margin is above this value and stays above it for more
than the time specified by the Xdsl2LineConfRaUsTimeUs, the than the time specified by the Xdsl2LineConfRaUsTimeUs, the
xTU-C shall attempt to increase the upstream net data rate. xTU-C shall attempt to increase the upstream net data rate.
The Upstream Up-shift Noise Margin ranges from 0 to 310 units The Upstream Up-shift Noise Margin ranges from 0 to 310 units
of 0.1 dB (Physical values are 0 to 31 dB)." of 0.1 dB (Physical values are 0 to 31 dB)."
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.4.4" REFERENCE "ITU-T G.997.1, paragraph 7.3.1.4.4"
DEFVAL { 10 } DEFVAL { 10 }
::= { xdsl2LineConfProfEntry 8 } ::= { xdsl2LineConfProfEntry 9 }
xdsl2LConfProfRaUsTimeDs OBJECT-TYPE xdsl2LConfProfRaUsTimeDs OBJECT-TYPE
SYNTAX Unsigned32(0..16383) SYNTAX Unsigned32(0..16383)
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The Downstream Up-Shift Time Interval, to be used when "The Downstream Up-Shift Time Interval, to be used when
Xdsl2LineConfRaModeDs is set to DynamicRa. The interval of Xdsl2LineConfRaModeDs is set to dynamicRa. The interval of
time that the downstream noise margin should stay above the time that the downstream noise margin should stay above the
Downstream Up-shift Noise Margin before the xTU-R shall Downstream Up-shift Noise Margin before the xTU-R shall
attempt to increase the downstream net data rate. The time attempt to increase the downstream net data rate. The time
interval ranges from 0 to 16383 seconds." interval ranges from 0 to 16383 seconds."
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.4.5" REFERENCE "ITU-T G.997.1, paragraph 7.3.1.4.5"
DEFVAL { 3600 } DEFVAL { 3600 }
::= { xdsl2LineConfProfEntry 9 } ::= { xdsl2LineConfProfEntry 10 }
xdsl2LConfProfRaUsTimeUs OBJECT-TYPE xdsl2LConfProfRaUsTimeUs OBJECT-TYPE
SYNTAX Unsigned32(0..16383) SYNTAX Unsigned32(0..16383)
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The Upstream Up-Shift Time Interval, to be used when "The Upstream Up-Shift Time Interval, to be used when
Xdsl2LineConfRaModeUs is set to DynamicRa. The interval of Xdsl2LineConfRaModeUs is set to dynamicRa. The interval of
time the upstream noise margin should stay above the time the upstream noise margin should stay above the
Upstream Up-shift Noise Margin before the xTU-C shall Upstream Up-shift Noise Margin before the xTU-C shall
attempt to increase the upstream net data rate. The time attempt to increase the upstream net data rate. The time
interval ranges from 0 to 16383 seconds." interval ranges from 0 to 16383 seconds."
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.4.6" REFERENCE "ITU-T G.997.1, paragraph 7.3.1.4.6"
DEFVAL { 3600 } DEFVAL { 3600 }
::= { xdsl2LineConfProfEntry 10 } ::= { xdsl2LineConfProfEntry 11 }
xdsl2LConfProfRaDsNrmsDs OBJECT-TYPE xdsl2LConfProfRaDsNrmsDs OBJECT-TYPE
SYNTAX Unsigned32(0..310) SYNTAX Unsigned32(0..310)
UNITS "0.1 dB" UNITS "0.1 dB"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The Downstream Down-Shift Noise Margin value, to be used when "The Downstream Down-Shift Noise Margin value, to be used when
Xdsl2LineConfRaModeDs is set to DynamicRa. If the downstream Xdsl2LineConfRaModeDs is set to dynamicRa. If the downstream
noise margin is below this value and stays below that for more noise margin is below this value and stays below that for more
than the time specified by the Xdsl2LineConfRaDsTimeDs, the than the time specified by the Xdsl2LineConfRaDsTimeDs, the
xTU-R shall attempt to decrease the downstream net data rate. xTU-R shall attempt to decrease the downstream net data rate.
The Downstream Down-shift Noise Margin ranges from 0 to 310 The Downstream Down-shift Noise Margin ranges from 0 to 310
units of 0.1 dB (Physical values are 0 to 31 dB)." units of 0.1 dB (Physical values are 0 to 31 dB)."
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.4.7" REFERENCE "ITU-T G.997.1, paragraph 7.3.1.4.7"
DEFVAL { 10 } DEFVAL { 10 }
::= { xdsl2LineConfProfEntry 11 } ::= { xdsl2LineConfProfEntry 12 }
xdsl2LConfProfRaDsNrmsUs OBJECT-TYPE xdsl2LConfProfRaDsNrmsUs OBJECT-TYPE
SYNTAX Unsigned32(0..310) SYNTAX Unsigned32(0..310)
UNITS "0.1 dB" UNITS "0.1 dB"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The Upstream Downshift Noise Margin value, to be used when "The Upstream Downshift Noise Margin value, to be used when
Xdsl2LineConfRaModeUs is set to DynamicRa. If the upstream Xdsl2LineConfRaModeUs is set to dynamicRa. If the upstream
noise margin is below this value and stays below that for more noise margin is below this value and stays below that for more
than the time specified by the Xdsl2LineConfRaDsTimeUs, the than the time specified by the Xdsl2LineConfRaDsTimeUs, the
xTU-C shall attempt to decrease the upstream net data rate. xTU-C shall attempt to decrease the upstream net data rate.
The Upstream Down-shift Noise Margin ranges from 0 to 310 The Upstream Down-shift Noise Margin ranges from 0 to 310
units of 0.1 dB (Physical values are 0 to 31 dB)." units of 0.1 dB (Physical values are 0 to 31 dB)."
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.4.8" REFERENCE "ITU-T G.997.1, paragraph 7.3.1.4.8"
DEFVAL { 10 } DEFVAL { 10 }
::= { xdsl2LineConfProfEntry 12 } ::= { xdsl2LineConfProfEntry 13 }
xdsl2LConfProfRaDsTimeDs OBJECT-TYPE xdsl2LConfProfRaDsTimeDs OBJECT-TYPE
SYNTAX Unsigned32(0..16383) SYNTAX Unsigned32(0..16383)
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The Downstream Downshift Time Interval, to be used when "The Downstream Downshift Time Interval, to be used when
Xdsl2LineConfRaModeDs is set to DynamicRa. The interval of Xdsl2LineConfRaModeDs is set to dynamicRa. The interval of
time the downstream noise margin should stay below the time the downstream noise margin should stay below the
Downstream Down-shift Noise Margin before the xTU-R shall Downstream Down-shift Noise Margin before the xTU-R shall
attempt to decrease the downstream net data rate. The time attempt to decrease the downstream net data rate. The time
interval ranges from 0 to 16383 seconds." interval ranges from 0 to 16383 seconds."
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.4.9" REFERENCE "ITU-T G.997.1, paragraph 7.3.1.4.9"
DEFVAL { 3600 } DEFVAL { 3600 }
::= { xdsl2LineConfProfEntry 13 } ::= { xdsl2LineConfProfEntry 14 }
xdsl2LConfProfRaDsTimeUs OBJECT-TYPE xdsl2LConfProfRaDsTimeUs OBJECT-TYPE
SYNTAX Unsigned32(0..16383) SYNTAX Unsigned32(0..16383)
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The Upstream Down-Shift Time Interval, to be used when "The Upstream Down-Shift Time Interval, to be used when
Xdsl2LineConfRaModeUs is set to DynamicRa. The interval of Xdsl2LineConfRaModeUs is set to dynamicRa. The interval of
time the upstream noise margin should stay below the Upstream time the upstream noise margin should stay below the Upstream
Down-shift Noise Margin before the xTU-C shall attempt to Down-shift Noise Margin before the xTU-C shall attempt to
decrease the upstream net data rate. The time interval ranges decrease the upstream net data rate. The time interval ranges
from 0 to 16383 seconds." from 0 to 16383 seconds."
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.4.10" REFERENCE "ITU-T G.997.1, paragraph 7.3.1.4.10"
DEFVAL { 3600 } DEFVAL { 3600 }
::= { xdsl2LineConfProfEntry 14 } ::= { xdsl2LineConfProfEntry 15 }
xdsl2LConfProfTargetSnrmDs OBJECT-TYPE xdsl2LConfProfTargetSnrmDs OBJECT-TYPE
SYNTAX Unsigned32(0..310) SYNTAX Unsigned32(0..310)
UNITS "0.1 dB" UNITS "0.1 dB"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The minimum Noise Margin the xTU-R receiver shall achieve, "The minimum Noise Margin the xTU-R receiver shall achieve,
relative to the BER requirement for each of the downstream relative to the BER requirement for each of the downstream
bearer channels, to successfully complete initialization. bearer channels, to successfully complete initialization.
The target noise margin ranges from 0 to 310 units of 0.1 dB The target noise margin ranges from 0 to 310 units of 0.1 dB
(Physical values are 0 to 31 dB)." (Physical values are 0 to 31 dB)."
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.3.1" REFERENCE "ITU-T G.997.1, paragraph 7.3.1.3.1"
DEFVAL { 60 } DEFVAL { 60 }
::= { xdsl2LineConfProfEntry 15 } ::= { xdsl2LineConfProfEntry 16 }
xdsl2LConfProfTargetSnrmUs OBJECT-TYPE xdsl2LConfProfTargetSnrmUs OBJECT-TYPE
SYNTAX Unsigned32(0..310) SYNTAX Unsigned32(0..310)
UNITS "0.1 dB" UNITS "0.1 dB"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The minimum Noise Margin the xTU-C receiver shall achieve, "The minimum Noise Margin the xTU-C receiver shall achieve,
relative to the BER requirement for each of the upstream relative to the BER requirement for each of the upstream
skipping to change at page 81, line 30 skipping to change at page 94, line 4
xdsl2LConfProfTargetSnrmUs OBJECT-TYPE xdsl2LConfProfTargetSnrmUs OBJECT-TYPE
SYNTAX Unsigned32(0..310) SYNTAX Unsigned32(0..310)
UNITS "0.1 dB" UNITS "0.1 dB"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The minimum Noise Margin the xTU-C receiver shall achieve, "The minimum Noise Margin the xTU-C receiver shall achieve,
relative to the BER requirement for each of the upstream relative to the BER requirement for each of the upstream
bearer channels, to successfully complete initialization. bearer channels, to successfully complete initialization.
The target noise margin ranges from 0 to 310 units of 0.1 dB The target noise margin ranges from 0 to 310 units of 0.1 dB
(Physical values are 0 to 31 dB)." (Physical values are 0 to 31 dB)."
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.3.2" REFERENCE "ITU-T G.997.1, paragraph 7.3.1.3.2"
DEFVAL { 60 } DEFVAL { 60 }
::= { xdsl2LineConfProfEntry 16 } ::= { xdsl2LineConfProfEntry 17 }
xdsl2LConfProfMaxSnrmDs OBJECT-TYPE xdsl2LConfProfMaxSnrmDs OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32 (0..310 | 2147483647)
UNITS "0.1 dB" UNITS "0.1 dB"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The maximum Noise Margin the xTU-R receiver shall try to "The maximum Noise Margin the xTU-R receiver shall try to
sustain. If the Noise Margin is above this level, the xTU-R sustain. If the Noise Margin is above this level, the xTU-R
shall request that the xTU-C reduce the xTU-C transmit power shall request that the xTU-C reduce the xTU-C transmit power
to get a noise margin below this limit (if this functionality to get a noise margin below this limit (if this functionality
is supported). The maximum noise margin ranges from 0 to 310 is supported). The maximum noise margin ranges from 0 to 310
units of 0.1 dB (Physical values are 0 to 31 dB). A value of units of 0.1 dB (Physical values are 0 to 31 dB). A value of
all 1's means that there is no maximum." 0x7FFFFFFF (2147483647) means that there is no maximum."
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.3.3" REFERENCE "ITU-T G.997.1, paragraph 7.3.1.3.3"
DEFVAL { 310 } DEFVAL { 310 }
::= { xdsl2LineConfProfEntry 17 } ::= { xdsl2LineConfProfEntry 18 }
xdsl2LConfProfMaxSnrmUs OBJECT-TYPE xdsl2LConfProfMaxSnrmUs OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32 (0..310 | 2147483647)
UNITS "0.1 dB" UNITS "0.1 dB"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The maximum Noise Margin the xTU-C receiver shall try to "The maximum Noise Margin the xTU-C receiver shall try to
sustain. If the Noise Margin is above this level, the xTU-C sustain. If the Noise Margin is above this level, the xTU-C
shall request that the xTU-R reduce the xTU-R transmit power shall request that the xTU-R reduce the xTU-R transmit power
to get a noise margin below this limit (if this functionality to get a noise margin below this limit (if this functionality
is supported). The maximum noise margin ranges from 0 to 310 is supported). The maximum noise margin ranges from 0 to 310
units of 0.1 dB (Physical values are 0 to 31 dB). A value of units of 0.1 dB (Physical values are 0 to 31 dB). A value of
all 1's means that there is no maximum." 0x7FFFFFFF (2147483647) means that there is no maximum."
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.3.4" REFERENCE "ITU-T G.997.1, paragraph 7.3.1.3.4"
DEFVAL { 310 } DEFVAL { 310 }
::= { xdsl2LineConfProfEntry 18 } ::= { xdsl2LineConfProfEntry 19 }
xdsl2LConfProfMinSnrmDs OBJECT-TYPE xdsl2LConfProfMinSnrmDs OBJECT-TYPE
SYNTAX Unsigned32(0..310) SYNTAX Unsigned32(0..310)
UNITS "0.1 dB" UNITS "0.1 dB"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The minimum Noise Margin the xTU-R receiver shall tolerate. "The minimum Noise Margin the xTU-R receiver shall tolerate.
If the noise margin falls below this level, the xTU-R shall If the noise margin falls below this level, the xTU-R shall
request that the xTU-C increase the xTU-C transmit power. request that the xTU-C increase the xTU-C transmit power.
If an increase to xTU-C transmit power is not possible, a If an increase to xTU-C transmit power is not possible, a
loss-of-margin (LOM) defect occurs, the xTU-R shall fail and loss-of-margin (LOM) defect occurs, the xTU-R shall fail and
attempt to reinitialize and the NMS shall be notified. The attempt to reinitialize and the NMS shall be notified. The
minimum noise margin ranges from 0 to 310 units of minimum noise margin ranges from 0 to 310 units of
0.1 dB (Physical values are 0 to 31 dB). A value of 0 means 0.1 dB (Physical values are 0 to 31 dB). A value of 0 means
that there is no minimum." that there is no minimum."
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.3.5" REFERENCE "ITU-T G.997.1, paragraph 7.3.1.3.5"
DEFVAL { 10 } DEFVAL { 10 }
skipping to change at page 82, line 41 skipping to change at page 95, line 15
If the noise margin falls below this level, the xTU-R shall If the noise margin falls below this level, the xTU-R shall
request that the xTU-C increase the xTU-C transmit power. request that the xTU-C increase the xTU-C transmit power.
If an increase to xTU-C transmit power is not possible, a If an increase to xTU-C transmit power is not possible, a
loss-of-margin (LOM) defect occurs, the xTU-R shall fail and loss-of-margin (LOM) defect occurs, the xTU-R shall fail and
attempt to reinitialize and the NMS shall be notified. The attempt to reinitialize and the NMS shall be notified. The
minimum noise margin ranges from 0 to 310 units of minimum noise margin ranges from 0 to 310 units of
0.1 dB (Physical values are 0 to 31 dB). A value of 0 means 0.1 dB (Physical values are 0 to 31 dB). A value of 0 means
that there is no minimum." that there is no minimum."
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.3.5" REFERENCE "ITU-T G.997.1, paragraph 7.3.1.3.5"
DEFVAL { 10 } DEFVAL { 10 }
::= { xdsl2LineConfProfEntry 19 } ::= { xdsl2LineConfProfEntry 20 }
xdsl2LConfProfMinSnrmUs OBJECT-TYPE xdsl2LConfProfMinSnrmUs OBJECT-TYPE
SYNTAX Unsigned32(0..310) SYNTAX Unsigned32(0..310)
UNITS "0.1 dB" UNITS "0.1 dB"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The minimum Noise Margin the xTU-C receiver shall tolerate. "The minimum Noise Margin the xTU-C receiver shall tolerate.
If the noise margin falls below this level, the xTU-C shall If the noise margin falls below this level, the xTU-C shall
request that the xTU-R increase the xTU-R transmit power. request that the xTU-R increase the xTU-R transmit power.
skipping to change at page 83, line 4 skipping to change at page 95, line 26
xdsl2LConfProfMinSnrmUs OBJECT-TYPE xdsl2LConfProfMinSnrmUs OBJECT-TYPE
SYNTAX Unsigned32(0..310) SYNTAX Unsigned32(0..310)
UNITS "0.1 dB" UNITS "0.1 dB"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The minimum Noise Margin the xTU-C receiver shall tolerate. "The minimum Noise Margin the xTU-C receiver shall tolerate.
If the noise margin falls below this level, the xTU-C shall If the noise margin falls below this level, the xTU-C shall
request that the xTU-R increase the xTU-R transmit power. request that the xTU-R increase the xTU-R transmit power.
If an increase of xTU-R transmit power is not possible, a If an increase of xTU-R transmit power is not possible, a
loss-of-margin (LOM) defect occurs, the xTU-C shall fail and loss-of-margin (LOM) defect occurs, the xTU-C shall fail and
attempt to re-initialize and the NMS shall be notified. The attempt to re-initialize and the NMS shall be notified. The
minimum noise margin ranges from 0 to 310 units of minimum noise margin ranges from 0 to 310 units of
0.1 dB (Physical values are 0 to 31 dB). A value of 0 means 0.1 dB (Physical values are 0 to 31 dB). A value of 0 means
that there is no minimum." that there is no minimum."
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.3.6" REFERENCE "ITU-T G.997.1, paragraph 7.3.1.3.6"
DEFVAL { 10 } DEFVAL { 10 }
::= { xdsl2LineConfProfEntry 20 } ::= { xdsl2LineConfProfEntry 21 }
xdsl2LConfProfMsgMinUs OBJECT-TYPE xdsl2LConfProfMsgMinUs OBJECT-TYPE
SYNTAX Unsigned32(4000..63000) SYNTAX Unsigned32(4000..63000)
UNITS "bits/second" UNITS "bits/second"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Minimum Overhead Rate Upstream. Defines the minimum rate of "Minimum Overhead Rate Upstream. Defines the minimum rate of
the message-based overhead that shall be maintained by the xTU the message-based overhead that shall be maintained by the xTU
in upstream direction. Expressed in bits per second and in upstream direction. Expressed in bits per second and
ranges from 4000 to 63000 bps." ranges from 4000 to 63000 bps."
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.5.1" REFERENCE "ITU-T G.997.1, paragraph 7.3.1.5.1"
DEFVAL { 4000 } DEFVAL { 4000 }
::= { xdsl2LineConfProfEntry 21 } ::= { xdsl2LineConfProfEntry 22 }
xdsl2LConfProfMsgMinDs OBJECT-TYPE xdsl2LConfProfMsgMinDs OBJECT-TYPE
SYNTAX Unsigned32(4000..63000) SYNTAX Unsigned32(4000..63000)
UNITS "bits/second" UNITS "bits/second"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Minimum Overhead Rate Downstream. Defines the minimum rate of "Minimum Overhead Rate Downstream. Defines the minimum rate of
the message-based overhead that shall be maintained by the xTU the message-based overhead that shall be maintained by the xTU
in downstream direction. Expressed in bits per second and in downstream direction. Expressed in bits per second and
ranges from 4000 to 63000 bps." ranges from 4000 to 63000 bps."
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.5.2" REFERENCE "ITU-T G.997.1, paragraph 7.3.1.5.2"
DEFVAL { 4000 } DEFVAL { 4000 }
::= { xdsl2LineConfProfEntry 22 } ::= { xdsl2LineConfProfEntry 23 }
xdsl2LConfProfXtuTransSysEna OBJECT-TYPE xdsl2LConfProfXtuTransSysEna OBJECT-TYPE
SYNTAX Xdsl2TransmissionModeType SYNTAX Xdsl2TransmissionModeType
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"xTU Transmission System Enabling (xTSE). A list of the "xTU Transmission System Enabling (XTSE). A list of the
different coding types enabled in this profile. It is coded different coding types enabled in this profile. It is coded
in a bit-map representation with 1 or more bits set. A bit in a bit-map representation with 1 or more bits set. A bit
set to '1' means that the xTUs may apply the respective set to '1' means that the xTUs may apply the respective
coding for the DSL line. A bit set to '0' means that coding for the DSL line. A bit set to '0' means that
the xTUs cannot apply the respective coding for the ADSL the xTUs cannot apply the respective coding for the ADSL
line. All 'reserved' bits should be set to '0'." line. All 'reserved' bits should be set to '0'."
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.1.1" REFERENCE "ITU-T G.997.1, paragraph 7.3.1.1.1"
::= { xdsl2LineConfProfEntry 23 } ::= { xdsl2LineConfProfEntry 24 }
xdsl2LConfProfPmMode OBJECT-TYPE xdsl2LConfProfPmMode OBJECT-TYPE
SYNTAX Xdsl2LConfProfPmMode SYNTAX Xdsl2LinePmMode
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Power management state Enabling. Defines the power states the "Power management state Enabling (PMMode). Defines the power
xTU-C or xTU-R may autonomously transition to on this line. states the xTU-C or xTU-R may autonomously transition to on
this line.
The various bit positions are: allowTransitionsToIdle (0) and The various bit positions are: allowTransitionsToIdle (0) and
allowTransitionsToLowPower (1). A bit with a '1' value means allowTransitionsToLowPower (1). A bit with a '1' value means
that the xTU is allowed to transit into the respective state that the xTU is allowed to transit into the respective state
and a '0' value means that the xTU is not allowed and a '0' value means that the xTU is not allowed
to transit into the respective state." to transit into the respective state."
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.1.4" REFERENCE "ITU-T G.997.1, paragraph 7.3.1.1.4"
DEFVAL { { allowTransitionsToIdle, allowTransitionsToLowPower } } DEFVAL { { allowTransitionsToIdle, allowTransitionsToLowPower } }
::= { xdsl2LineConfProfEntry 24 } ::= { xdsl2LineConfProfEntry 25 }
xdsl2LConfProfL0Time OBJECT-TYPE xdsl2LConfProfL0Time OBJECT-TYPE
SYNTAX Unsigned32 (0..255) SYNTAX Unsigned32 (0..255)
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This minimum time (in seconds) between an Exit from the L2 "The minimum time (in seconds) between an Exit from the L2
state and the next Entry into the L2 state. It ranges from 0 state and the next Entry into the L2 state (L0-TIME).
to 255 seconds." It ranges from 0 to 255 seconds."
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.1.5" REFERENCE "ITU-T G.997.1, paragraph 7.3.1.1.5"
DEFVAL { 255 } DEFVAL { 255 }
::= { xdsl2LineConfProfEntry 25 } ::= { xdsl2LineConfProfEntry 26 }
xdsl2LConfProfL2Time OBJECT-TYPE xdsl2LConfProfL2Time OBJECT-TYPE
SYNTAX Unsigned32 (0..255) SYNTAX Unsigned32 (0..255)
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This minimum time (in seconds) between an Entry into the "The minimum time (in seconds) between an Entry into the
L2 state and the first Power Trim in the L2 state and between L2 state and the first Power Trim in the L2 state and between
two consecutive Power Trims in the L2 State. two consecutive Power Trims in the L2 State (L2-TIME).
It ranges from 0 to 255 seconds." It ranges from 0 to 255 seconds."
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.1.6" REFERENCE "ITU-T G.997.1, paragraph 7.3.1.1.6"
DEFVAL { 255 } DEFVAL { 255 }
::= { xdsl2LineConfProfEntry 26 } ::= { xdsl2LineConfProfEntry 27 }
xdsl2LConfProfL2Atpr OBJECT-TYPE xdsl2LConfProfL2Atpr OBJECT-TYPE
SYNTAX Unsigned32 (0..31) SYNTAX Unsigned32 (0..31)
UNITS "dB" UNITS "dB"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The maximum aggregate transmit power reduction (in dB) that "The maximum aggregate transmit power reduction (in dB) that
can be performed at transition of L0 to L2 state or through a can be performed at transition of L0 to L2 state or through a
single Power Trim in the L2 state. single Power Trim in the L2 state (L2-ATPR).
It ranges from 0 dB to 31 dB." It ranges from 0 dB to 31 dB."
REFERENCE "ITU-T G.997.1 (amendment 1), 7.3.1.1.7" REFERENCE "ITU-T G.997.1, paragraph 7.3.1.1.7"
DEFVAL { 10 } DEFVAL { 10 }
::= { xdsl2LineConfProfEntry 27 } ::= { xdsl2LineConfProfEntry 28 }
xdsl2LConfProfL2Atprt OBJECT-TYPE xdsl2LConfProfL2Atprt OBJECT-TYPE
SYNTAX Unsigned32 (0..31) SYNTAX Unsigned32 (0..31)
UNITS "dB" UNITS "dB"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The total maximum aggregate transmit power reduction "The total maximum aggregate transmit power reduction
(in dB) that can be performed in an L2 state. This is the (in dB) that can be performed in an L2 state. This is the
sum of all reductions of L2 Request (i.e., at transition of sum of all reductions of L2 Request (i.e., at transition of
L0 to L2 state) and Power Trims." L0 to L2 state) and Power Trims (L2-ATPRT)."
REFERENCE "ITU-T G.997.1 (amendment 1), 7.3.1.1.9" REFERENCE "ITU-T G.997.1, paragraph 7.3.1.1.9"
DEFVAL { 31 } DEFVAL { 31 }
::= { xdsl2LineConfProfEntry 28 } ::= { xdsl2LineConfProfEntry 29 }
------*****************************************************
------Additional objects
------*****************************************************
xdsl2LConfProfProfiles OBJECT-TYPE
SYNTAX Xdsl2LineProfiles
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The configuration parameter contains the G.993.2
profiles to be allowed by the near-end xTU on this line
(PROFILES).
It is coded in a bitmap representation (0 if not allowed,
1 if allowed) "
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.1.11"
DEFVAL { { profile8a, profile8b, profile8c,
profile8d, profile12a, profile12b,
profile17a, profile30a } }
::= { xdsl2LineConfProfEntry 30 }
xdsl2LConfProfDpboEPsd OBJECT-TYPE
SYNTAX Xdsl2PsdMaskDs
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"(DPBOEPSD).
The configuration parameter defines the PSD mask that
is assumed to be permitted at the exchange. This parameter
shall have up to 16 breakpoints using a format similar to
the one used for xdsl2LConfProfPsdMaskDs."
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.2.13"
::= { xdsl2LineConfProfEntry 31 }
xdsl2LConfProfDpboEsEL OBJECT-TYPE
SYNTAX Unsigned32 (0..511)
UNITS "0.5 dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"(DPBOESEL).
The configuration parameter defines the assumed
electrical length of cables (E-side cables) connecting
exchange based DSL services to a remote flexibility point
(cabinet), that hosts the xTU-C that is subject to
spectrally shaped downstream power back-off depending on
this length. The electrical length is defined as the loss
(in dB) of an equivalent length of hypothetical cable at
a reference frequency defined by the network operator or
in spectrum management regulations.
The parameter shall represent an electrical length from
0 dB (coded as 0) to 255.5 dB (coded as 511) in steps of
0.5 dB. A value of zero indicates that the DPBO in this
section shall be disabled."
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.2.13"
DEFVAL { 0 }
::= { xdsl2LineConfProfEntry 32 }
xdsl2LConfProfUs0Mask OBJECT-TYPE
SYNTAX Xdsl2LineUs0Mask
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"(US0MASK).
The configuration parameter contains the US0 PSD masks
to be allowed by the near-end xTU on the line. This parameter
is only defined for G.993.2 Annex A. It is represented as a
bitmap (0 if not allowed and 1 if allowed). "
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.1.15"
------*****************************************************
------Ref will become 7.3.1.2.18
------*****************************************************
DEFVAL { {} }
::= { xdsl2LineConfProfEntry 33 }
------*****************************************************
------End of additional objects
------*****************************************************
xdsl2LConfProfRowStatus OBJECT-TYPE xdsl2LConfProfRowStatus OBJECT-TYPE
SYNTAX RowStatus SYNTAX RowStatus
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object is used to create a new row or to modify or "This object is used to create a new row or to modify or
delete an existing row in this table. delete an existing row in this table.
A profile is activated by setting this object to 'active'. A profile is activated by setting this object to 'active'.
When 'active' is set, the system will validate the profile. When 'active' is set, the system will validate the profile.
Profile modification is prohibited while this object is set
to 'active'.
Before a profile can be deleted or taken out of service Before a profile can be deleted or taken out of service
(by setting this object to 'destroy' or 'notInService'), (by setting this object to 'destroy' or 'notInService'),
it must be first unreferenced from all associated it must be first unreferenced from all associated
templates." templates."
::= { xdsl2LineConfProfEntry 29 } ::= { xdsl2LineConfProfEntry 34 }
------***************************************************** ------*****************************************************
----- The following table should be changed. Instead of the ------The following table should be changed. Instead of the
----- current modes list we'll have a list that follows the xTSE ------current modes list we'll have a list that follows the xTSE
------***************************************************** ------*****************************************************
------------------------------------------ ------------------------------------------
-- xdsl2LineConfProfModeSpecTable -- -- xdsl2LineConfProfModeSpecTable --
------------------------------------------ ------------------------------------------
xdsl2LineConfProfModeSpecTable OBJECT-TYPE xdsl2LineConfProfModeSpecTable OBJECT-TYPE
SYNTAX SEQUENCE OF Xdsl2LineConfProfModeSpecEntry SYNTAX SEQUENCE OF Xdsl2LineConfProfModeSpecEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
skipping to change at page 87, line 22 skipping to change at page 101, line 22
SEQUENCE { SEQUENCE {
xdsl2LconfProfXdslMode Xdsl2OperationModes, xdsl2LconfProfXdslMode Xdsl2OperationModes,
xdsl2LConfProfMaxNomPsdDs Integer32, xdsl2LConfProfMaxNomPsdDs Integer32,
xdsl2LConfProfMaxNomPsdUs Integer32, xdsl2LConfProfMaxNomPsdUs Integer32,
xdsl2LConfProfMaxNomAtpDs Unsigned32, xdsl2LConfProfMaxNomAtpDs Unsigned32,
xdsl2LConfProfMaxNomAtpUs Unsigned32, xdsl2LConfProfMaxNomAtpUs Unsigned32,
xdsl2LConfProfMaxAggRxPwrUs Integer32, xdsl2LConfProfMaxAggRxPwrUs Integer32,
xdsl2LConfProfPsdMaskDs Xdsl2PsdMaskDs, xdsl2LConfProfPsdMaskDs Xdsl2PsdMaskDs,
xdsl2LConfProfPsdMaskUs Xdsl2PsdMaskUs, xdsl2LConfProfPsdMaskUs Xdsl2PsdMaskUs,
xdsl2LConfProfPsdMaskSelectUs Unsigned32, xdsl2LConfProfPsdMaskSelectUs Unsigned32,
xdsl2LConfProfClassMask Xdsl2LineClassMask,
xdsl2LConfProfLimitMask Xdsl2LineLimitMask,
xdsl2LConfProfUs0Disable Xdsl2LineUs0Disable,
xdsl2LConfProfModeSpecRowStatus RowStatus xdsl2LConfProfModeSpecRowStatus RowStatus
} }
xdsl2LconfProfXdslMode OBJECT-TYPE xdsl2LconfProfXdslMode OBJECT-TYPE
SYNTAX Xdsl2OperationModes SYNTAX Xdsl2OperationModes
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The DSL Mode is a way of categorizing the various xDSL "The DSL Mode is a way of categorizing the various xDSL
transmission modes into groups, each group (xDSL Mode) shares transmission modes into groups, each group (xDSL Mode) shares
skipping to change at page 87, line 45 skipping to change at page 101, line 48
xdsl2LConfProfAtuTransSysEna for that profile. " xdsl2LConfProfAtuTransSysEna for that profile. "
REFERENCE "DSL Forum TR-90, paragraph 5.1.8" REFERENCE "DSL Forum TR-90, paragraph 5.1.8"
::= { xdsl2LineConfProfModeSpecEntry 1 } ::= { xdsl2LineConfProfModeSpecEntry 1 }
xdsl2LConfProfMaxNomPsdDs OBJECT-TYPE xdsl2LConfProfMaxNomPsdDs OBJECT-TYPE
SYNTAX Integer32(-600..-300) SYNTAX Integer32(-600..-300)
UNITS "0.1 dBm/Hz" UNITS "0.1 dBm/Hz"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The maximum nominal transmit PSD in the downstream "(MAXNOMPSDds).
The maximum nominal transmit PSD in the downstream
direction during initialization and Showtime. It ranges from direction during initialization and Showtime. It ranges from
-600 to -300 units of 0.1 dBm/Hz. (physical values are -60 to -600 to -300 units of 0.1 dBm/Hz. (physical values are -60 to
-30 dBm/Hz). " -30 dBm/Hz). "
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.2" REFERENCE "ITU-T G.997.1, paragraph 7.3.1.2.1"
DEFVAL { -300 } DEFVAL { -300 }
::= { xdsl2LineConfProfModeSpecEntry 2 } ::= { xdsl2LineConfProfModeSpecEntry 2 }
xdsl2LConfProfMaxNomPsdUs OBJECT-TYPE xdsl2LConfProfMaxNomPsdUs OBJECT-TYPE
SYNTAX Integer32(-600..-300) SYNTAX Integer32(-600..-300)
UNITS "0.1 dBm/Hz" UNITS "0.1 dBm/Hz"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The maximum nominal transmit PSD in the upstream direction "(MAXNOMPSDus).
The maximum nominal transmit PSD in the upstream direction
during initialization and Showtime. It ranges from -600 to during initialization and Showtime. It ranges from -600 to
-300 units of 0.1 dBm/Hz. (physical values are -60 to -300 units of 0.1 dBm/Hz. (physical values are -60 to
-30 dBm/Hz). " -30 dBm/Hz). "
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.2" REFERENCE "ITU-T G.997.1, paragraph 7.3.1.2.2"
DEFVAL { -300 } DEFVAL { -300 }
::= { xdsl2LineConfProfModeSpecEntry 3 } ::= { xdsl2LineConfProfModeSpecEntry 3 }
xdsl2LConfProfMaxNomAtpDs OBJECT-TYPE xdsl2LConfProfMaxNomAtpDs OBJECT-TYPE
SYNTAX Unsigned32 (0..255) SYNTAX Unsigned32 (0..255)
UNITS "0.1 dBm" UNITS "0.1 dBm"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The maximum nominal aggregate transmit power in the "(MAXNOMATPds).
The maximum nominal aggregate transmit power in the
downstream direction during initialization and Showtime. It downstream direction during initialization and Showtime. It
ranges from 0 to 255 units of 0.1 dBm (physical values are 0 ranges from 0 to 255 units of 0.1 dBm (physical values are 0
to 25.5 dBm)." to 25.5 dBm)."
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.2" REFERENCE "ITU-T G.997.1, paragraph 7.3.1.2.3"
DEFVAL { 255 } DEFVAL { 255 }
::= { xdsl2LineConfProfModeSpecEntry 4 } ::= { xdsl2LineConfProfModeSpecEntry 4 }
xdsl2LConfProfMaxNomAtpUs OBJECT-TYPE xdsl2LConfProfMaxNomAtpUs OBJECT-TYPE
SYNTAX Unsigned32 (0..255) SYNTAX Unsigned32 (0..255)
UNITS "0.1 dBm" UNITS "0.1 dBm"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The maximum nominal aggregate transmit power in the upstream "(MAXNOMATPus).
The maximum nominal aggregate transmit power in the upstream
direction during initialization and Showtime. It ranges from direction during initialization and Showtime. It ranges from
0 to 255 units of 0.1 dBm (physical values are 0 to 25.5 0 to 255 units of 0.1 dBm (physical values are 0 to 25.5
dBm)." dBm)."
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.2" REFERENCE "ITU-T G.997.1, paragraph 7.3.1.2.4"
DEFVAL { 255 } DEFVAL { 255 }
::= { xdsl2LineConfProfModeSpecEntry 5 } ::= { xdsl2LineConfProfModeSpecEntry 5 }
xdsl2LConfProfMaxAggRxPwrUs OBJECT-TYPE xdsl2LConfProfMaxAggRxPwrUs OBJECT-TYPE
SYNTAX Integer32(-255..2147483647) SYNTAX Integer32(-255..255 | 2147483647)
UNITS "0.1 dBm" UNITS "0.1 dBm"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The maximum upstream aggregate receive power over the relevant "(MAXRXPWRus).
The maximum upstream aggregate receive power over the relevant
set of sub-carriers. The xTU-C should verify that the set of sub-carriers. The xTU-C should verify that the
upstream power cutback is such that this maximum aggregate upstream power cutback is such that this maximum aggregate
receive power value is honored. It ranges from -255 to 255 receive power value is honored. It ranges from -255 to 255
units of 0.1 dBm (physical values are -25.5 to 25.5 dBm). units of 0.1 dBm (physical values are -25.5 to 25.5 dBm).
A value of all ones means that there is no limit." A value of 0x7FFFFFFF (2147483647) means that there is no
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.2" limit."
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.2.5"
DEFVAL { 255 } DEFVAL { 255 }
::= { xdsl2LineConfProfModeSpecEntry 6 } ::= { xdsl2LineConfProfModeSpecEntry 6 }
xdsl2LConfProfPsdMaskDs OBJECT-TYPE xdsl2LConfProfPsdMaskDs OBJECT-TYPE
SYNTAX Xdsl2PsdMaskDs SYNTAX Xdsl2PsdMaskDs
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The downstream PSD mask applicable at the U-C2 reference "(PSDMASKds).
The downstream PSD mask applicable at the U-C2 reference
point. point.
This parameter is used only for G.992.5 and it may impose PSD This parameter is used only for G.992.5 and it may impose PSD
restrictions (breakpoints) in addition to the Limit PSD mask restrictions (breakpoints) in addition to the Limit PSD mask
defined in G.992.5. defined in G.992.5.
This is a string of 32 pairs of values in the following This is a string of 32 pairs of values in the following
structure: structure:
Octets 0+1 - Index of 1st sub-carrier used in the context Octets 0+1 - Index of 1st sub-carrier used in the context
of a first breakpoint. of a first breakpoint.
Octet 2 - The PSD reduction for the sub-carrier indicated in Octet 2 - The PSD reduction for the sub-carrier indicated in
octets 0 and 1. octets 0 and 1.
skipping to change at page 89, line 42 skipping to change at page 104, line 5
This architecture continues until octets 94-95, which are This architecture continues until octets 94-95, which are
associated with a 32nd breakpoint. associated with a 32nd breakpoint.
Each subcarrier index is an unsigned number in the range 1 and Each subcarrier index is an unsigned number in the range 1 and
NSCds. Each PSD reduction value is in the range 0 (0dBm/Hz) to NSCds. Each PSD reduction value is in the range 0 (0dBm/Hz) to
255 (-127.5dBm/Hz) with steps of 0.5dBm/Hz. Valid values are 255 (-127.5dBm/Hz) with steps of 0.5dBm/Hz. Valid values are
in the range 0 to 190 (0 to -95dBm/Hz). in the range 0 to 190 (0 to -95dBm/Hz).
When the number of breakpoints is less than 32, all remaining When the number of breakpoints is less than 32, all remaining
octets are set to the value 0. Note that the content of this octets are set to the value 0. Note that the content of this
object should be correlated with the sub-carriers mask and with object should be correlated with the sub-carriers mask and with
the RFI setup. " the RFI setup. "
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.2" REFERENCE "ITU-T G.997.1, paragraph 7.3.1.2.9"
::= { xdsl2LineConfProfModeSpecEntry 7 } ::= { xdsl2LineConfProfModeSpecEntry 7 }
xdsl2LConfProfPsdMaskUs OBJECT-TYPE xdsl2LConfProfPsdMaskUs OBJECT-TYPE
SYNTAX Xdsl2PsdMaskUs SYNTAX Xdsl2PsdMaskUs
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The upstream PSD mask applicable at the U-R2 reference "(PSDMASKus).
The upstream PSD mask applicable at the U-R2 reference
point. point.
This parameter is used only for G.992.5 and it may impose PSD This parameter is used only for G.992.5 and it may impose PSD
restrictions (breakpoints) in addition to the Limit PSD mask restrictions (breakpoints) in addition to the Limit PSD mask
defined in G.992.5. defined in G.992.5.
This is a string of 16 pairs of values in the following This is a string of 16 pairs of values in the following
structure: structure:
Octets 0+1 - Index of 1st sub-carrier used in the context Octets 0+1 - Index of 1st sub-carrier used in the context
of a first breakpoint. of a first breakpoint.
Octet 2 - The PSD reduction for the sub-carrier indicated in Octet 2 - The PSD reduction for the sub-carrier indicated in
octets 0 and 1. octets 0 and 1.
Octets 3-5 - Same, for a 2nd breakpoint. Octets 3-5 - Same, for a 2nd breakpoint.
skipping to change at page 90, line 26 skipping to change at page 104, line 37
This architecture continues until octets 9-47, which are This architecture continues until octets 9-47, which are
associated with a 16th breakpoint. associated with a 16th breakpoint.
Each subcarrier index is an unsigned number in the range 1 and Each subcarrier index is an unsigned number in the range 1 and
NSCus. Each PSD reduction value is in the range 0 (0dBm/Hz) to NSCus. Each PSD reduction value is in the range 0 (0dBm/Hz) to
255 (-127.5dBm/Hz) with steps of 0.5dBm/Hz. Valid values are 255 (-127.5dBm/Hz) with steps of 0.5dBm/Hz. Valid values are
in the range 0 to 190 (0 to -95dBm/Hz). in the range 0 to 190 (0 to -95dBm/Hz).
When the number of breakpoints is less than 16, all remaining When the number of breakpoints is less than 16, all remaining
octets are set to the value 0. Note that the content of this octets are set to the value 0. Note that the content of this
object should be correlated with the sub-carriers mask and with object should be correlated with the sub-carriers mask and with
the RFI setup. " the RFI setup. "
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.2" REFERENCE "ITU-T G.997.1, paragraph 7.3.1.2.12"
::= { xdsl2LineConfProfModeSpecEntry 8 } ::= { xdsl2LineConfProfModeSpecEntry 8 }
xdsl2LConfProfPsdMaskSelectUs OBJECT-TYPE xdsl2LConfProfPsdMaskSelectUs OBJECT-TYPE
SYNTAX Unsigned32(1..9) SYNTAX Unsigned32(1..9)
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The selected upstream PSD mask. This parameter is used only "The selected upstream PSD mask. This parameter is used only
for annexes J and M of G.992.3 and G.992.5, and the same for annexes J and M of G.992.3 and G.992.5, and the same
selection is used for all relevant enabled bits in selection is used for all relevant enabled bits in
xdsl2LConfProfAtuTransSysEna. " xdsl2LConfProfAtuTransSysEna. "
REFERENCE "ITU-T G.997.1 (amendment 1), 7.3.1.10" REFERENCE "ITU-T G.997.1, paragraph 7.3.1.2.11"
DEFVAL { 1 } DEFVAL { 1 }
::= { xdsl2LineConfProfModeSpecEntry 9 } ::= { xdsl2LineConfProfModeSpecEntry 9 }
------*****************************************************
------Additional objects
------*****************************************************
xdsl2LConfProfClassMask OBJECT-TYPE
SYNTAX Xdsl2LineClassMask
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"(CLASSMASK).
In order to reduce the number of configuration
possibilities, the limit Power Spectral Density masks
(see LIMITMASK) are grouped in PSD mask classes.
Each class is designed such that the PSD levels of each
limit PSD mask of a specific class are equal in their
respective passband above 276 kHz.
This parameter is defined per VDSL2 Annex enabled in the
xdsl2LConfProfXtuTransSysEna object. It selects a single
PSD mask class per Annex that is activated at the
VTU-O."
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.1.12"
------*****************************************************
------Ref will become 7.3.1.2.15
------*****************************************************
DEFVAL { a998ORb997M1cORc998 }
::= { xdsl2LineConfProfModeSpecEntry 10 }
xdsl2LConfProfLimitMask OBJECT-TYPE
SYNTAX Xdsl2LineLimitMask
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"(LIMITMASK).
This configuration parameter contains the G.993.2 limit
PSD masks of the selected PSD mask class, enabled by the
near-end xTU on this line for each class of profiles.
This parameter is defined per VDSL2 Annex enabled in the
xdsl2LConfProfXtuTransSysEna object.
Through this parameter several limit PSD masks of the
selected PSD mask class (xdsl2LConfProfClassMask) may be
enabled. The enabling parameter is coded in a bitmap
representation (0 if the associated mask is not allowed,
1 if it is allowed)."
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.1.13"
------*****************************************************
------Ref will become 7.3.1.2.16
------*****************************************************
DEFVAL { {} }
::= { xdsl2LineConfProfModeSpecEntry 11 }
xdsl2LConfProfUs0Disable OBJECT-TYPE
SYNTAX Xdsl2LineUs0Disable
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"(US0DISABLE).
This configuration parameter indicates if the use of
US0 is disabled for each limit PSD mask enabled in the
xdsl2LConfProfLimitMask parameter.
This parameter is defined per VDSL2 Annex enabled in the
xdsl2LConfProfXtuTransSysEna object.
For each limit PSD mask enabled in xdsl2LconfProfLimitMask
parameter, a bit shall indicate if US0 is disabled. The
disabling parameter is coded as a bitmap. The bit is set to
1 if US0 is disabled for the associated limit mask.
This parameter and the xdsl2LconfProfLimitMask parameter
use the same structure."
REFERENCE "ITU-T G.997.1, paragraph 7.3.1.1.14"
------*****************************************************
------Ref will become 7.3.1.2.17
------*****************************************************
DEFVAL { {} }
::= { xdsl2LineConfProfModeSpecEntry 12 }
------*****************************************************
------End of additional objects
------*****************************************************
xdsl2LConfProfModeSpecRowStatus OBJECT-TYPE xdsl2LConfProfModeSpecRowStatus OBJECT-TYPE
SYNTAX RowStatus SYNTAX RowStatus
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object is used to create a new row or to modify or "This object is used to create a new row or to modify or
delete an existing row in this table. delete an existing row in this table.
A profile is activated by setting this object to 'active'. A profile is activated by setting this object to 'active'.
When 'active' is set, the system will validate the profile. When 'active' is set, the system will validate the profile.
Profile modification is prohibited while this object is set
to 'active'.
Before a profile can be deleted or taken out of service Before a profile can be deleted or taken out of service
(by setting this object to 'destroy' or 'notInService'), (by setting this object to 'destroy' or 'notInService'),
it must be first unreferenced from all associated it must be first unreferenced from all associated
templates." templates."
::= { xdsl2LineConfProfModeSpecEntry 10 } ::= { xdsl2LineConfProfModeSpecEntry 13 }
------------------------------------------------ ------------------------------------------------
-- xdsl2ChConfProfileTable -- -- xdsl2ChConfProfileTable --
------------------------------------------------ ------------------------------------------------
xdsl2ChConfProfileTable OBJECT-TYPE xdsl2ChConfProfileTable OBJECT-TYPE
SYNTAX SEQUENCE OF Xdsl2ChConfProfileEntry SYNTAX SEQUENCE OF Xdsl2ChConfProfileEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table xdsl2ChConfProfileTable contains DSL channel "The table xdsl2ChConfProfileTable contains DSL channel
profile configuration. profile configuration.
skipping to change at page 93, line 10 skipping to change at page 108, line 48
xdsl2ChConfProfMinResDataRateDs OBJECT-TYPE xdsl2ChConfProfMinResDataRateDs OBJECT-TYPE
SYNTAX Unsigned32(0..200000000) SYNTAX Unsigned32(0..200000000)
UNITS "bits/second" UNITS "bits/second"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Minimum Reserved Data Rate on Downstream direction. The "Minimum Reserved Data Rate on Downstream direction. The
minimum reserved net data rate for the bearer channel, coded minimum reserved net data rate for the bearer channel, coded
in bit/s. This parameter is used only if the Rate Adaptation in bit/s. This parameter is used only if the Rate Adaptation
Mode in the direction of the bearer channel (i.e., Mode in the direction of the bearer channel (i.e.,
Xdsl2LineConfRaModeDs) is set to DynamicRa." Xdsl2LineConfRaModeDs) is set to dynamicRa."
REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1" REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1"
::= { xdsl2ChConfProfileEntry 4 } ::= { xdsl2ChConfProfileEntry 4 }
xdsl2ChConfProfMinResDataRateUs OBJECT-TYPE xdsl2ChConfProfMinResDataRateUs OBJECT-TYPE
SYNTAX Unsigned32(0..200000000) SYNTAX Unsigned32(0..200000000)
UNITS "bits/second" UNITS "bits/second"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Minimum Reserved Data Rate on Upstream direction. The minimum "Minimum Reserved Data Rate on Upstream direction. The minimum
reserved net data rate for the bearer channel, coded in reserved net data rate for the bearer channel, coded in
bit/s. This parameter is used only if the Rate Adaptation bit/s. This parameter is used only if the Rate Adaptation
Mode in the direction of the bearer channel (i.e., Mode in the direction of the bearer channel (i.e.,
skipping to change at page 93, line 24 skipping to change at page 109, line 14
xdsl2ChConfProfMinResDataRateUs OBJECT-TYPE xdsl2ChConfProfMinResDataRateUs OBJECT-TYPE
SYNTAX Unsigned32(0..200000000) SYNTAX Unsigned32(0..200000000)
UNITS "bits/second" UNITS "bits/second"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Minimum Reserved Data Rate on Upstream direction. The minimum "Minimum Reserved Data Rate on Upstream direction. The minimum
reserved net data rate for the bearer channel, coded in reserved net data rate for the bearer channel, coded in
bit/s. This parameter is used only if the Rate Adaptation bit/s. This parameter is used only if the Rate Adaptation
Mode in the direction of the bearer channel (i.e., Mode in the direction of the bearer channel (i.e.,
Xdsl2LineConfRaModeUs) is set to DynamicRa." Xdsl2LineConfRaModeUs) is set to dynamicRa."
REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1" REFERENCE "ITU-T G.997.1, paragraph 7.3.2.1"
::= { xdsl2ChConfProfileEntry 5 } ::= { xdsl2ChConfProfileEntry 5 }
xdsl2ChConfProfMaxDataRateDs OBJECT-TYPE xdsl2ChConfProfMaxDataRateDs OBJECT-TYPE
SYNTAX Unsigned32(0..200000000) SYNTAX Unsigned32(0..200000000)
UNITS "bits/second" UNITS "bits/second"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Maximum Data Rate on Downstream direction. The maximum net "Maximum Data Rate on Downstream direction. The maximum net
skipping to change at page 97, line 50 skipping to change at page 113, line 40
xdsl2ChConfProfRowStatus OBJECT-TYPE xdsl2ChConfProfRowStatus OBJECT-TYPE
SYNTAX RowStatus SYNTAX RowStatus
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object is used to create a new row or to modify or "This object is used to create a new row or to modify or
delete an existing row in this table. delete an existing row in this table.
A profile is activated by setting this object to 'active'. A profile is activated by setting this object to 'active'.
When 'active' is set, the system will validate the profile. When 'active' is set, the system will validate the profile.
Profile modification is prohibited while this object is set
to 'active'.
Before a profile can be deleted or taken out of service Before a profile can be deleted or taken out of service
(by setting this object to 'destroy' or 'notInService'), (by setting this object to 'destroy' or 'notInService'),
it must be first unreferenced from all associated it must be first unreferenced from all associated
templates." templates."
::= { xdsl2ChConfProfileEntry 20 } ::= { xdsl2ChConfProfileEntry 20 }
------------------------------------------------ ------------------------------------------------
-- xdsl2LineAlarmConfTemplateTable -- -- xdsl2LineAlarmConfTemplateTable --
------------------------------------------------ ------------------------------------------------
skipping to change at page 100, line 50 skipping to change at page 116, line 40
xdsl2LAlarmConfTempRowStatus OBJECT-TYPE xdsl2LAlarmConfTempRowStatus OBJECT-TYPE
SYNTAX RowStatus SYNTAX RowStatus
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object is used to create a new row or to modify or "This object is used to create a new row or to modify or
delete an existing row in this table. delete an existing row in this table.
A template is activated by setting this object to 'active'. A template is activated by setting this object to 'active'.
When 'active' is set, the system will validate the template. When 'active' is set, the system will validate the template.
Template modification is prohibited while this object is set
to 'active'.
Before a template can be deleted or taken out of service Before a template can be deleted or taken out of service
(by setting this object to 'destroy' or 'notInService'), (by setting this object to 'destroy' or 'notInService'),
it must be first unreferenced from all associated it must be first unreferenced from all associated
lines." lines."
::= { xdsl2LineAlarmConfTemplateEntry 7 } ::= { xdsl2LineAlarmConfTemplateEntry 7 }
------------------------------------------------ ------------------------------------------------
-- xdsl2LineAlarmConfProfileTable -- -- xdsl2LineAlarmConfProfileTable --
------------------------------------------------ ------------------------------------------------
skipping to change at page 106, line 14 skipping to change at page 121, line 50
xdsl2LineAlarmConfProfileRowStatus OBJECT-TYPE xdsl2LineAlarmConfProfileRowStatus OBJECT-TYPE
SYNTAX RowStatus SYNTAX RowStatus
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object is used to create a new row or to modify or "This object is used to create a new row or to modify or
delete an existing row in this table. delete an existing row in this table.
A profile is activated by setting this object to 'active'. A profile is activated by setting this object to 'active'.
When 'active' is set, the system will validate the profile. When 'active' is set, the system will validate the profile.
Profile modification is prohibited while this object is set
to 'active'.
Before a profile can be deleted or taken out of service Before a profile can be deleted or taken out of service
(by setting this object to 'destroy' or 'notInService'), (by setting this object to 'destroy' or 'notInService'),
it must be first unreferenced from all associated it must be first unreferenced from all associated
templates." templates."
::= { xdsl2LineAlarmConfProfileEntry 14 } ::= { xdsl2LineAlarmConfProfileEntry 14 }
------------------------------------------------ ------------------------------------------------
-- xdsl2ChAlarmConfProfileTable -- -- xdsl2ChAlarmConfProfileTable --
------------------------------------------------ ------------------------------------------------
skipping to change at page 108, line 39 skipping to change at page 124, line 26
xdsl2ChAlarmConfProfileRowStatus OBJECT-TYPE xdsl2ChAlarmConfProfileRowStatus OBJECT-TYPE
SYNTAX RowStatus SYNTAX RowStatus
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object is used to create a new row or to modify or "This object is used to create a new row or to modify or
delete an existing row in this table. delete an existing row in this table.
A profile is activated by setting this object to 'active'. A profile is activated by setting this object to 'active'.
When 'active' is set, the system will validate the profile. When 'active' is set, the system will validate the profile.
Profile modification is prohibited while this object is set
to 'active'.
Before a profile can be deleted or taken out of service Before a profile can be deleted or taken out of service
(by setting this object to 'destroy' or 'notInService'), (by setting this object to 'destroy' or 'notInService'),
it must be first unreferenced from all associated it must be first unreferenced from all associated
templates." templates."
::= { xdsl2ChAlarmConfProfileEntry 6 } ::= { xdsl2ChAlarmConfProfileEntry 6 }
------------------------------------------------ ------------------------------------------------
-- PM line current counters -- -- PM line current counters --
------------------------------------------------ ------------------------------------------------
xdsl2PMLineCurrTable OBJECT-TYPE xdsl2PMLineCurrTable OBJECT-TYPE
SYNTAX SEQUENCE OF Xdsl2PMLineCurrEntry SYNTAX SEQUENCE OF Xdsl2PMLineCurrEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table xdsl2PMLineCurrTable contains current Performance "The table xdsl2PMLineCurrTable contains current Performance
Monitoring results of DSL line. The objects in this table Monitoring results of DSL line. "
are NOT persistent."
::= { xdsl2PMLine 1 } ::= { xdsl2PMLine 1 }
xdsl2PMLineCurrEntry OBJECT-TYPE xdsl2PMLineCurrEntry OBJECT-TYPE
SYNTAX Xdsl2PMLineCurrEntry SYNTAX Xdsl2PMLineCurrEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table xdsl2PMLineCurrTable contains current Performance "The table xdsl2PMLineCurrTable contains current Performance
Monitoring results of DSL line. Monitoring results of DSL line.
The index of this table is an interface index where the The index of this table is an interface index where the
interface has an ifType of vdsl2(xxx) and the termination interface has an ifType of vdsl2(xxx) and the termination
unit." unit."
INDEX { ifIndex, xdsl2PMLCurrUnit } INDEX { ifIndex, xdsl2PMLCurrUnit }
::= { xdsl2PMLineCurrTable 1 } ::= { xdsl2PMLineCurrTable 1 }
Xdsl2PMLineCurrEntry ::= Xdsl2PMLineCurrEntry ::=
SEQUENCE { SEQUENCE {
xdsl2PMLCurrUnit Xdsl2Unit, xdsl2PMLCurrUnit Xdsl2Unit,
xdsl2PMLCurrValidIntervals Unsigned32, xdsl2PMLCurrValidIntervals Unsigned32,
skipping to change at page 111, line 18 skipping to change at page 126, line 50
REFERENCE "ITU-T G.997.1, paragraph 7.2.1" REFERENCE "ITU-T G.997.1, paragraph 7.2.1"
::= { xdsl2PMLineCurrEntry 6 } ::= { xdsl2PMLineCurrEntry 6 }
xdsl2PMLCurr15MSes OBJECT-TYPE xdsl2PMLCurr15MSes OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Count of seconds during this interval that there was: "Count of seconds during this interval that there was:
xtu-c: (CRC-8 summed over all bearer channels) >= 18 OR xtu-c: (CRC-8 anomalies in one or more of the
LOS >= 1 OR SEF >= 1 OR LPR >= 1 received bearer channels) >= 18 OR LOS >= 1
xtu-r: (FEBE summed over all bearer channels) >= 18 OR OR SEF >= 1 OR LPR >= 1
LOS-FE >= 1 OR RDI >= 1 OR LPR-FE >= 1 . xtu-r: (FEBE anomalies in one or more of the
received bearer channels) >= 18 OR LOS-FE >= 1
OR RDI >= 1 OR LPR-FE >= 1 .
This parameter is inhibited during UAS." This parameter is inhibited during UAS."
REFERENCE "ITU-T G.997.1, paragraph 7.2.1" REFERENCE "ITU-T G.997.1, paragraph 7.2.1"
::= { xdsl2PMLineCurrEntry 7 } ::= { xdsl2PMLineCurrEntry 7 }
xdsl2PMLCurr15MLoss OBJECT-TYPE xdsl2PMLCurr15MLoss OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
skipping to change at page 113, line 14 skipping to change at page 128, line 47
REFERENCE "ITU-T G.997.1, paragraph 7.2.1" REFERENCE "ITU-T G.997.1, paragraph 7.2.1"
::= { xdsl2PMLineCurrEntry 14 } ::= { xdsl2PMLineCurrEntry 14 }
xdsl2PMLCurr1DaySes OBJECT-TYPE xdsl2PMLCurr1DaySes OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Count of seconds during this interval that there was: "Count of seconds during this interval that there was:
xtu-c: (CRC-8 summed over all bearer channels) >= 18 OR xtu-c: (CRC-8 anomalies in one or more of the
LOS >= 1 OR SEF >= 1 OR LPR >= 1 received bearer channels) >= 18 OR LOS >= 1
xtu-r: (FEBE summed over all bearer channels) >= 18 OR OR SEF >= 1 OR LPR >= 1
LOS-FE >= 1 OR RDI >= 1 OR LPR-FE >= 1 xtu-r: (FEBE anomalies in one or more of the
received bearer channels) >= 18 OR LOS-FE >= 1
OR RDI >= 1 OR LPR-FE >= 1 .
This parameter is inhibited during UAS." This parameter is inhibited during UAS."
REFERENCE "ITU-T G.997.1, paragraph 7.2.1" REFERENCE "ITU-T G.997.1, paragraph 7.2.1"
::= { xdsl2PMLineCurrEntry 15 } ::= { xdsl2PMLineCurrEntry 15 }
xdsl2PMLCurr1DayLoss OBJECT-TYPE xdsl2PMLCurr1DayLoss OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
skipping to change at page 114, line 9 skipping to change at page 129, line 43
------------------------------------------------ ------------------------------------------------
-- PM line init current counters -- -- PM line init current counters --
------------------------------------------------ ------------------------------------------------
xdsl2PMLineCurrInitTable OBJECT-TYPE xdsl2PMLineCurrInitTable OBJECT-TYPE
SYNTAX SEQUENCE OF Xdsl2PMLineCurrInitEntry SYNTAX SEQUENCE OF Xdsl2PMLineCurrInitEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table xdsl2PMLineCurrInitTable contains current "The table xdsl2PMLineCurrInitTable contains current
initialization counters of DSL line. The objects in initialization counters of DSL line. "
this table are NOT persistent."
::= { xdsl2PMLine 2 } ::= { xdsl2PMLine 2 }
xdsl2PMLineCurrInitEntry OBJECT-TYPE xdsl2PMLineCurrInitEntry OBJECT-TYPE
SYNTAX Xdsl2PMLineCurrInitEntry SYNTAX Xdsl2PMLineCurrInitEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table xdsl2PMLineCurrInitTable contains current "The table xdsl2PMLineCurrInitTable contains current
initialization counters of DSL line. initialization counters of DSL line.
The index of this table is an interface index where the The index of this table is an interface index where the
skipping to change at page 117, line 5 skipping to change at page 132, line 37
------------------------------------------- -------------------------------------------
-- PM line history 15 Minutes -- -- PM line history 15 Minutes --
------------------------------------------- -------------------------------------------
xdsl2PMLineHist15MinTable OBJECT-TYPE xdsl2PMLineHist15MinTable OBJECT-TYPE
SYNTAX SEQUENCE OF Xdsl2PMLineHist15MinEntry SYNTAX SEQUENCE OF Xdsl2PMLineHist15MinEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table xdsl2PMLineHist15MinTable contains PM line history "The table xdsl2PMLineHist15MinTable contains PM line history
for 15min intervals of DSL line. The objects in this table for 15min intervals of DSL line. "
are NOT persistent."
::= { xdsl2PMLine 3 } ::= { xdsl2PMLine 3 }
xdsl2PMLineHist15MinEntry OBJECT-TYPE xdsl2PMLineHist15MinEntry OBJECT-TYPE
SYNTAX Xdsl2PMLineHist15MinEntry SYNTAX Xdsl2PMLineHist15MinEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table xdsl2PMLineHist15MinTable contains PM line history "The table xdsl2PMLineHist15MinTable contains PM line history
for 15min intervals of DSL line. for 15min intervals of DSL line.
The index of this table is an interface index where the The index of this table is an interface index where the
skipping to change at page 118, line 47 skipping to change at page 134, line 33
REFERENCE "ITU-T G.997.1, paragraph 7.2.1" REFERENCE "ITU-T G.997.1, paragraph 7.2.1"
::= { xdsl2PMLineHist15MinEntry 5 } ::= { xdsl2PMLineHist15MinEntry 5 }
xdsl2PMLHist15MSes OBJECT-TYPE xdsl2PMLHist15MSes OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Count of seconds during this interval that there was: "Count of seconds during this interval that there was:
xtu-c: (CRC-8 summed over all bearer channels) >= 18 OR xtu-c: (CRC-8 anomalies in one or more of the
LOS >= 1 OR SEF >= 1 OR LPR >= 1 received bearer channels) >= 18 OR LOS >= 1
xtu-r: (FEBE summed over all bearer channels) >= 18 OR OR SEF >= 1 OR LPR >= 1
LOS-FE >= 1 OR RDI >= 1 OR LPR-FE >= 1. xtu-r: (FEBE anomalies in one or more of the
received bearer channels) >= 18 OR LOS-FE >= 1
OR RDI >= 1 OR LPR-FE >= 1 .
This parameter is inhibited during UAS." This parameter is inhibited during UAS."
REFERENCE "ITU-T G.997.1, paragraph 7.2.1" REFERENCE "ITU-T G.997.1, paragraph 7.2.1"
::= { xdsl2PMLineHist15MinEntry 6 } ::= { xdsl2PMLineHist15MinEntry 6 }
xdsl2PMLHist15MLoss OBJECT-TYPE xdsl2PMLHist15MLoss OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
skipping to change at page 119, line 49 skipping to change at page 135, line 37
--------------------------------------- ---------------------------------------
-- PM line history 1 Day -- -- PM line history 1 Day --
--------------------------------------- ---------------------------------------
xdsl2PMLineHist1DayTable OBJECT-TYPE xdsl2PMLineHist1DayTable OBJECT-TYPE
SYNTAX SEQUENCE OF Xdsl2PMLineHist1DayEntry SYNTAX SEQUENCE OF Xdsl2PMLineHist1DayEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table xdsl2PMLineHist1DayTable contains PM line history "The table xdsl2PMLineHist1DayTable contains PM line history
for 24 hours intervals of DSL line. The objects in this for 24 hours intervals of DSL line. "
table are NOT persistent."
::= { xdsl2PMLine 4 } ::= { xdsl2PMLine 4 }
xdsl2PMLineHist1DayEntry OBJECT-TYPE xdsl2PMLineHist1DayEntry OBJECT-TYPE
SYNTAX Xdsl2PMLineHist1DayEntry SYNTAX Xdsl2PMLineHist1DayEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table xdsl2PMLineHist1DayTable contains PM line history "The table xdsl2PMLineHist1DayTable contains PM line history
for 24 hours intervals of DSL line. for 24 hours intervals of DSL line.
The indexes of this table is an interface index where the The indexes of this table is an interface index where the
skipping to change at page 121, line 47 skipping to change at page 137, line 33
REFERENCE "ITU-T G.997.1, paragraph 7.2.1" REFERENCE "ITU-T G.997.1, paragraph 7.2.1"
::= { xdsl2PMLineHist1DayEntry 5 } ::= { xdsl2PMLineHist1DayEntry 5 }
xdsl2PMLHist1DSes OBJECT-TYPE xdsl2PMLHist1DSes OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Count of seconds during this interval that there was: "Count of seconds during this interval that there was:
xtu-c: (CRC-8 summed over all bearer channels) >= 18 OR xtu-c: (CRC-8 anomalies in one or more of the
LOS >= 1 OR SEF >> 1 OR LPR >= 1 received bearer channels) >= 18 OR LOS >= 1
xtu-r: (FEBE summed over all bearer channels) >= 18 OR OR SEF >= 1 OR LPR >= 1
LOS-FE >= 1 OR RDI >= 1 OR LPR-FE >= 1. xtu-r: (FEBE anomalies in one or more of the
received bearer channels) >= 18 OR LOS-FE >= 1
OR RDI >= 1 OR LPR-FE >= 1 .
This parameter is inhibited during UAS." This parameter is inhibited during UAS."
REFERENCE "ITU-T G.997.1, paragraph 7.2.1" REFERENCE "ITU-T G.997.1, paragraph 7.2.1"
::= { xdsl2PMLineHist1DayEntry 6 } ::= { xdsl2PMLineHist1DayEntry 6 }
xdsl2PMLHist1DLoss OBJECT-TYPE xdsl2PMLHist1DLoss OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
skipping to change at page 123, line 6 skipping to change at page 138, line 39
-- PM line init history 15 Minutes -- -- PM line init history 15 Minutes --
------------------------------------------- -------------------------------------------
xdsl2PMLineInitHist15MinTable OBJECT-TYPE xdsl2PMLineInitHist15MinTable OBJECT-TYPE
SYNTAX SEQUENCE OF Xdsl2PMLineInitHist15MinEntry SYNTAX SEQUENCE OF Xdsl2PMLineInitHist15MinEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table xdsl2PMLineInitHist15MinTable contains PM line "The table xdsl2PMLineInitHist15MinTable contains PM line
initialization history for 15 minutes intervals of DSL initialization history for 15 minutes intervals of DSL
line. The objects in this table are NOT persistent." line. "
::= { xdsl2PMLine 5 } ::= { xdsl2PMLine 5 }
xdsl2PMLineInitHist15MinEntry OBJECT-TYPE xdsl2PMLineInitHist15MinEntry OBJECT-TYPE
SYNTAX Xdsl2PMLineInitHist15MinEntry SYNTAX Xdsl2PMLineInitHist15MinEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table xdsl2PMLineInitHist15MinTable contains PM line "The table xdsl2PMLineInitHist15MinTable contains PM line
initialization history for 15 minutes intervals of DSL initialization history for 15 minutes intervals of DSL
line. line.
skipping to change at page 125, line 14 skipping to change at page 141, line 5
------------------------------------------- -------------------------------------------
-- PM line init history 1 Day -- -- PM line init history 1 Day --
------------------------------------------- -------------------------------------------
xdsl2PMLineInitHist1DayTable OBJECT-TYPE xdsl2PMLineInitHist1DayTable OBJECT-TYPE
SYNTAX SEQUENCE OF Xdsl2PMLineInitHist1DayEntry SYNTAX SEQUENCE OF Xdsl2PMLineInitHist1DayEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table xdsl2PMLineInitHist1DayTable contains PM line "The table xdsl2PMLineInitHist1DayTable contains PM line
initialization history for 24 hours intervals of DSL initialization history for 24 hours intervals of DSL
line. The objects in this table are NOT persistent." line."
::= { xdsl2PMLine 6 } ::= { xdsl2PMLine 6 }
xdsl2PMLineInitHist1DayEntry OBJECT-TYPE xdsl2PMLineInitHist1DayEntry OBJECT-TYPE
SYNTAX Xdsl2PMLineInitHist1DayEntry SYNTAX Xdsl2PMLineInitHist1DayEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table xdsl2PMLineInitHist1DayTable contains PM line "The table xdsl2PMLineInitHist1DayTable contains PM line
initialization history for 24 hours intervals of DSL initialization history for 24 hours intervals of DSL
line. line.
skipping to change at page 127, line 11 skipping to change at page 143, line 4
::= { xdsl2PMLineInitHist1DayEntry 6 } ::= { xdsl2PMLineInitHist1DayEntry 6 }
xdsl2PMLHistinit1DValidInterval OBJECT-TYPE xdsl2PMLHistinit1DValidInterval OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This variable indicates if the data for this interval is "This variable indicates if the data for this interval is
valid." valid."
::= { xdsl2PMLineInitHist1DayEntry 7 } ::= { xdsl2PMLineInitHist1DayEntry 7 }
--------------------------------------------------- ---------------------------------------------------
-- PM channel current counters -- -- PM channel current counters --
--------------------------------------------------- ---------------------------------------------------
xdsl2PMChCurrTable OBJECT-TYPE xdsl2PMChCurrTable OBJECT-TYPE
SYNTAX SEQUENCE OF Xdsl2PMChCurrEntry SYNTAX SEQUENCE OF Xdsl2PMChCurrEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table xdsl2PMChCurrTable contains current Performance "The table xdsl2PMChCurrTable contains current Performance
Monitoring results of DSL channel. The objects in this Monitoring results of DSL channel. "
table are NOT persistent."
::= { xdsl2PMChannel 1 } ::= { xdsl2PMChannel 1 }
xdsl2PMChCurrEntry OBJECT-TYPE xdsl2PMChCurrEntry OBJECT-TYPE
SYNTAX Xdsl2PMChCurrEntry SYNTAX Xdsl2PMChCurrEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table xdsl2PMChCurrTable contains current Performance "The table xdsl2PMChCurrTable contains current Performance
Monitoring results of DSL channel. Monitoring results of DSL channel.
The indexes of this table is an interface index where The indexes of this table is an interface index where
skipping to change at page 130, line 34 skipping to change at page 146, line 23
------------------------------------------- -------------------------------------------
-- PM channel history 15 Minutes -- -- PM channel history 15 Minutes --
------------------------------------------- -------------------------------------------
xdsl2PMChHist15MinTable OBJECT-TYPE xdsl2PMChHist15MinTable OBJECT-TYPE
SYNTAX SEQUENCE OF Xdsl2PMChHist15MinEntry SYNTAX SEQUENCE OF Xdsl2PMChHist15MinEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table xdsl2PMChCurrTable contains current Performance "The table xdsl2PMChCurrTable contains current Performance
Monitoring results of DSL channel. The objects in this Monitoring results of DSL channel. "
table are NOT persistent."
::= { xdsl2PMChannel 2 } ::= { xdsl2PMChannel 2 }
xdsl2PMChHist15MinEntry OBJECT-TYPE xdsl2PMChHist15MinEntry OBJECT-TYPE
SYNTAX Xdsl2PMChHist15MinEntry SYNTAX Xdsl2PMChHist15MinEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table xdsl2PMChCurrTable contains current Performance "The table xdsl2PMChCurrTable contains current Performance
Monitoring results of DSL channel. Monitoring results of DSL channel.
The indexes of this table is an interface index where The indexes of this table is an interface index where
skipping to change at page 132, line 41 skipping to change at page 148, line 29
------------------------------------------ ------------------------------------------
-- PM channel history 1 Day -- -- PM channel history 1 Day --
------------------------------------------ ------------------------------------------
xdsl2PMChHist1DTable OBJECT-TYPE xdsl2PMChHist1DTable OBJECT-TYPE
SYNTAX SEQUENCE OF Xdsl2PMChHist1DEntry SYNTAX SEQUENCE OF Xdsl2PMChHist1DEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table xdsl2PMChHist1DayTable contains PM channel history "The table xdsl2PMChHist1DayTable contains PM channel history
for 1 day intervals of DSL. The objects in this table are for 1 day intervals of DSL. "
NOT persistent."
::= { xdsl2PMChannel 3 } ::= { xdsl2PMChannel 3 }
xdsl2PMChHist1DEntry OBJECT-TYPE xdsl2PMChHist1DEntry OBJECT-TYPE
SYNTAX Xdsl2PMChHist1DEntry SYNTAX Xdsl2PMChHist1DEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table xdsl2PMChHist1DayTable contains PM channel history "The table xdsl2PMChHist1DayTable contains PM channel history
for 1 day intervals of DSL. for 1 day intervals of DSL.
The indexes of this table is an interface index where The indexes of this table is an interface index where
skipping to change at page 139, line 24 skipping to change at page 155, line 11
xdsl2LineStatusXtur xdsl2LineStatusXtur
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This notification indicates that a status change is "This notification indicates that a status change is
detected for the referred XTU-R." detected for the referred XTU-R."
::= { xdsl2Notifications 18 } ::= { xdsl2Notifications 18 }
-- conformance information -- conformance information
vdsl2Groups OBJECT IDENTIFIER ::= { vdsl2Conformance 1 } vdsl2Groups OBJECT IDENTIFIER ::= { xdsl2Conformance 1 }
vdsl2Compliances OBJECT IDENTIFIER ::= { vdsl2Conformance 2 } vdsl2Compliances OBJECT IDENTIFIER ::= { xdsl2Conformance 2 }
vdsl2LineMibCompliance MODULE-COMPLIANCE vdsl2LineMibCompliance MODULE-COMPLIANCE
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The compliance statement for SNMP entities which "The compliance statement for SNMP entities which
manage VDSL2/ADSL/ADSL2 and ADSL2+ interfaces." manage VDSL2/ADSL/ADSL2 and ADSL2+ interfaces."
MODULE -- this module MODULE -- this module
MANDATORY-GROUPS MANDATORY-GROUPS
{ {
vdsl2LineGroup, vdsl2LineGroup,
skipping to change at page 143, line 4 skipping to change at page 158, line 38
vdsl2ChannelStatusPtmGroup OBJECT-GROUP vdsl2ChannelStatusPtmGroup OBJECT-GROUP
OBJECTS OBJECTS
{ {
xdsl2ChStatusPtmStatus xdsl2ChStatusPtmStatus
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The group of status objects on the data path level "The group of status objects on the data path level
when it is PTM." when it is PTM."
::= { vdsl2Groups 4 } ::= { vdsl2Groups 4 }
vdsl2SCStatusGroup OBJECT-GROUP vdsl2SCStatusGroup OBJECT-GROUP
OBJECTS OBJECTS
{ {
xdsl2SCStatusMtime,
xdsl2SCStatusSnr,
xdsl2SCStatusBitsAlloc,
xdsl2SCStatusGainAlloc,
xdsl2SCStatusTssi,
xdsl2SCStatusLinScale, xdsl2SCStatusLinScale,
xdsl2SCStatusLinReal, xdsl2SCStatusLinScGroupSize,
xdsl2SCStatusLinImg,
xdsl2SCStatusLogMt, xdsl2SCStatusLogMt,
xdsl2SCStatusLog, xdsl2SCStatusLogScGroupSize,
xdsl2SCStatusQlnMt, xdsl2SCStatusQlnMt,
xdsl2SCStatusQln, xdsl2SCStatusQlnScGroupSize,
xdsl2SCStatusMtime,
xdsl2SCStatusSnrScGroupSize,
xdsl2SCStatusLnAtten, xdsl2SCStatusLnAtten,
xdsl2SCStatusSigAtten, xdsl2SCStatusSigAtten,
xdsl2SCStatusSnrMargin, xdsl2SCStatusSnrMargin,
xdsl2SCStatusAttainableRate, xdsl2SCStatusAttainableRate,
xdsl2SCStatusActAtp, xdsl2SCStatusActAtp,
xdsl2SCStatusRowStatus xdsl2SCStatusRowStatus,
xdsl2SCStatusLinReal,
xdsl2SCStatusLinImg,
xdsl2SCStatusLog,
xdsl2SCStatusQln,
xdsl2SCStatusSnr,
xdsl2SCStatusBitsAlloc,
xdsl2SCStatusGainAlloc,
xdsl2SCStatusTssi
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The group of status objects on the sub-carrier level. "The group of status objects on the sub-carrier level.
They are updated as a result of a DELT process." They are updated as a result of a DELT process."
::= { vdsl2Groups 5 } ::= { vdsl2Groups 5 }
vdsl2LineInventoryGroup OBJECT-GROUP vdsl2LineInventoryGroup OBJECT-GROUP
OBJECTS OBJECTS
{ {
skipping to change at page 144, line 27 skipping to change at page 160, line 18
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The group of objects in a line configuration template." "The group of objects in a line configuration template."
::= { vdsl2Groups 7 } ::= { vdsl2Groups 7 }
vdsl2LineConfProfGroup OBJECT-GROUP vdsl2LineConfProfGroup OBJECT-GROUP
OBJECTS OBJECTS
{ {
xdsl2LConfProfScMaskDs, xdsl2LConfProfScMaskDs,
xdsl2LConfProfScMaskUs, xdsl2LConfProfScMaskUs,
xdsl2LConfProfRfiBandsDs, xdsl2LConfProfVdsl2CarMask,
xdsl2LConfProfRfiBands,
xdsl2LConfProfRaModeDs, xdsl2LConfProfRaModeDs,
xdsl2LConfProfRaModeUs, xdsl2LConfProfRaModeUs,
xdsl2LConfProfTargetSnrmDs, xdsl2LConfProfTargetSnrmDs,
xdsl2LConfProfTargetSnrmUs, xdsl2LConfProfTargetSnrmUs,
xdsl2LConfProfMaxSnrmDs, xdsl2LConfProfMaxSnrmDs,
xdsl2LConfProfMaxSnrmUs, xdsl2LConfProfMaxSnrmUs,
xdsl2LConfProfMinSnrmDs, xdsl2LConfProfMinSnrmDs,
xdsl2LConfProfMinSnrmUs, xdsl2LConfProfMinSnrmUs,
xdsl2LConfProfAtuTransSysEna, xdsl2LConfProfXtuTransSysEna,
xdsl2LConfProfPmMode, xdsl2LConfProfPmMode,
xdsl2LConfProfL0Time, xdsl2LConfProfL0Time,
xdsl2LConfProfL2Time, xdsl2LConfProfL2Time,
xdsl2LConfProfL2Atpr, xdsl2LConfProfL2Atpr,
xdsl2LConfProfL2Atprt, xdsl2LConfProfL2Atprt,
xdsl2LConfProfProfiles,
xdsl2LConfProfDpboEPsd,
xdsl2LConfProfDpboEsEL,
xdsl2LConfProfUs0Mask,
xdsl2LConfProfRowStatus xdsl2LConfProfRowStatus
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The group of objects in a line configuration profile." "The group of objects in a line configuration profile."
::= { vdsl2Groups 8 } ::= { vdsl2Groups 8 }
vdsl2LineConfProfRaGroup OBJECT-GROUP vdsl2LineConfProfRaGroup OBJECT-GROUP
OBJECTS OBJECTS
{ {
skipping to change at page 145, line 42 skipping to change at page 161, line 38
OBJECTS OBJECTS
{ {
xdsl2LConfProfMaxNomPsdDs, xdsl2LConfProfMaxNomPsdDs,
xdsl2LConfProfMaxNomPsdUs, xdsl2LConfProfMaxNomPsdUs,
xdsl2LConfProfMaxNomAtpDs, xdsl2LConfProfMaxNomAtpDs,
xdsl2LConfProfMaxNomAtpUs, xdsl2LConfProfMaxNomAtpUs,
xdsl2LConfProfMaxAggRxPwrUs, xdsl2LConfProfMaxAggRxPwrUs,
xdsl2LConfProfPsdMaskDs, xdsl2LConfProfPsdMaskDs,
xdsl2LConfProfPsdMaskUs, xdsl2LConfProfPsdMaskUs,
xdsl2LConfProfPsdMaskSelectUs, xdsl2LConfProfPsdMaskSelectUs,
xdsl2LConfProfClassMask,
xdsl2LConfProfLimitMask,
xdsl2LConfProfUs0Disable,
xdsl2LConfProfModeSpecRowStatus xdsl2LConfProfModeSpecRowStatus
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The group of objects in a line configuration profile "The group of objects in a line configuration profile
that have an instance for each operation mode allowed." that have an instance for each operation mode allowed."
::= { vdsl2Groups 11 } ::= { vdsl2Groups 11 }
vdsl2ChConfProfileGroup OBJECT-GROUP vdsl2ChConfProfileGroup OBJECT-GROUP
OBJECTS OBJECTS
skipping to change at page 147, line 44 skipping to change at page 163, line 43
xdsl2LineAlarmConfProfileRowStatus xdsl2LineAlarmConfProfileRowStatus
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The group of objects in a line alarm profile." "The group of objects in a line alarm profile."
::= { vdsl2Groups 16 } ::= { vdsl2Groups 16 }
vdsl2ChAlarmConfProfileGroup OBJECT-GROUP vdsl2ChAlarmConfProfileGroup OBJECT-GROUP
OBJECTS OBJECTS
{ {
xdsl2ChAlarmConfProfileAtucThresh15MinCodingViolations, xdsl2ChAlarmConfProfileXtucThresh15MinCodingViolations,
xdsl2ChAlarmConfProfileAtucThresh15MinCorrected, xdsl2ChAlarmConfProfileXtucThresh15MinCorrected,
xdsl2ChAlarmConfProfileAturThresh15MinCodingViolations, xdsl2ChAlarmConfProfileXturThresh15MinCodingViolations,
xdsl2ChAlarmConfProfileAturThresh15MinCorrected, xdsl2ChAlarmConfProfileXturThresh15MinCorrected,
xdsl2ChAlarmConfProfileRowStatus xdsl2ChAlarmConfProfileRowStatus
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The group of objects in a channel alarm profile." "The group of objects in a channel alarm profile."
::= { vdsl2Groups 17 } ::= { vdsl2Groups 17 }
vdsl2PMLineCurrGroup OBJECT-GROUP vdsl2PMLineCurrGroup OBJECT-GROUP
OBJECTS OBJECTS
{ {
skipping to change at page 152, line 19 skipping to change at page 168, line 19
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The group of objects that report the available memory "The group of objects that report the available memory
resources for DELT processes." resources for DELT processes."
::= { vdsl2Groups 30 } ::= { vdsl2Groups 30 }
vdsl2ThreshNotificationGroup NOTIFICATION-GROUP vdsl2ThreshNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS NOTIFICATIONS
{ {
xdsl2LinePerfFECSThreshAtuc, xdsl2LinePerfFECSThreshXtuc,
xdsl2LinePerfFECSThreshAtur, xdsl2LinePerfFECSThreshXtur,
xdsl2LinePerfESThreshAtuc, xdsl2LinePerfESThreshXtuc,
xdsl2LinePerfESThreshAtur, xdsl2LinePerfESThreshXtur,
xdsl2LinePerfSESThreshAtuc, xdsl2LinePerfSESThreshXtuc,
xdsl2LinePerfSESThreshAtur, xdsl2LinePerfSESThreshXtur,
xdsl2LinePerfLOSSThreshAtuc, xdsl2LinePerfLOSSThreshXtuc,
xdsl2LinePerfLOSSThreshAtur, xdsl2LinePerfLOSSThreshXtur,
xdsl2LinePerfUASThreshAtuc, xdsl2LinePerfUASThreshXtuc,
xdsl2LinePerfUASThreshAtur, xdsl2LinePerfUASThreshXtur,
xdsl2LinePerfCodingViolationsThreshAtuc, xdsl2LinePerfCodingViolationsThreshXtuc,
xdsl2LinePerfCodingViolationsThreshAtur, xdsl2LinePerfCodingViolationsThreshXtur,
xdsl2LinePerfCorrectedThreshAtuc, xdsl2LinePerfCorrectedThreshXtuc,
xdsl2LinePerfCorrectedThreshAtur, xdsl2LinePerfCorrectedThreshXtur,
xdsl2LinePerfFailedFullInitThresh, xdsl2LinePerfFailedFullInitThresh,
xdsl2LinePerfFailedShortInitThresh xdsl2LinePerfFailedShortInitThresh
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This group supports notifications of significant conditions "This group supports notifications of significant conditions
associated with DSL lines." associated with DSL lines."
::= { vdsl2Groups 31 } ::= { vdsl2Groups 31 }
vdsl2StatusChangeNotificationGroup NOTIFICATION-GROUP vdsl2StatusChangeNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS NOTIFICATIONS
{ {
xdsl2LineStatusChangeAtuc, xdsl2LineStatusChangeXtuc,
xdsl2LineStatusChangeAtur xdsl2LineStatusChangeXtur
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This group supports notifications of thresholds crossing "This group supports notifications of thresholds crossing
associated with DSL lines." associated with DSL lines."
::= { vdsl2Groups 32 } ::= { vdsl2Groups 32 }
END END
4. Implementation Analysis 4. Implementation Analysis
skipping to change at page 160, line 49 skipping to change at page 176, line 49
The authors are deeply grateful to the authors of the HDSL2 LINE MIB The authors are deeply grateful to the authors of the HDSL2 LINE MIB
(RFC 4319), Clay Sikes and Bob Ray, for contributing to accelerating (RFC 4319), Clay Sikes and Bob Ray, for contributing to accelerating
the work on this document. The structure of this document as well as the work on this document. The structure of this document as well as
several paragraphs originate in their document. several paragraphs originate in their document.
Other contributions and advice were received from the following: Other contributions and advice were received from the following:
Randy Presuhn (Mindspring) Randy Presuhn (Mindspring)
Chen Jian (Huawei) Chen Jian (Huawei)
Bert Wijnen (Lucent) Bert Wijnen (Lucent)
Clay Sikes (Zhone)
7. References 7. References
7.1. Normative References 7.1. Normative References
[G.992.1] "Asymmetric digital subscriber line (ADSL) transceivers", [G.992.1] "Asymmetric digital subscriber line (ADSL) transceivers",
ITU-T G.992.1, 1999. ITU-T G.992.1, 1999.
[G.992.2] "Splitterless asymmetric digital subscriber line (ADSL) [G.992.2] "Splitterless asymmetric digital subscriber line (ADSL)
transceivers", ITU-T G.992.2, 1999. transceivers", ITU-T G.992.2, 1999.
skipping to change at page 161, line 31 skipping to change at page 177, line 29
[G.992.5] "Asymmetric digital subscriber line (ADSL) transceivers - [G.992.5] "Asymmetric digital subscriber line (ADSL) transceivers -
Extended bandwidth ADSL2 (ADSL2+)", ITU-T G.992.5, 2003. Extended bandwidth ADSL2 (ADSL2+)", ITU-T G.992.5, 2003.
[G.993.1] "Very-high speed Digital Subscriber Line Transceivers", [G.993.1] "Very-high speed Digital Subscriber Line Transceivers",
ITU-T G.993.1, June 2004. ITU-T G.993.1, June 2004.
[G.993.2] "Very-high speed Digital Subscriber Line Transceivers 2 [G.993.2] "Very-high speed Digital Subscriber Line Transceivers 2
(VDSL2 draft)", ITU-T G.993.2, February 2006. (VDSL2 draft)", ITU-T G.993.2, February 2006.
[G.997.1] "Physical layer management for digital subscriber line [G.997.1] "Physical layer management for digital subscriber line
(DSL) transceivers", ITU-T G.997.1, May 2003. (DSL) transceivers", ITU-T G.997.1, June 2006.
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119, March 1997. Requirement Levels", BCP 14, RFC 2119, March 1997.
[RFC2578] McCloghrie, K., Ed., Perkins, D., Ed., and J. [RFC2578] McCloghrie, K., Ed., Perkins, D., Ed., and J.
Schoenwaelder, Ed., "Structure of Management Information Schoenwaelder, Ed., "Structure of Management Information
Version 2 (SMIv2)", STD 58, RFC 2578, April 1999. Version 2 (SMIv2)", STD 58, RFC 2578, April 1999.
[RFC2579] McCloghrie, K., Ed., Perkins, D., Ed., and J. [RFC2579] McCloghrie, K., Ed., Perkins, D., Ed., and J.
Schoenwaelder, Ed., "Textual Conventions for SMIv2", Schoenwaelder, Ed., "Textual Conventions for SMIv2",
skipping to change at page 162, line 22 skipping to change at page 178, line 20
for MIB Modules Using Performance History Based on 15 for MIB Modules Using Performance History Based on 15
Minute Intervals", RFC 3705, February 2004. Minute Intervals", RFC 3705, February 2004.
[T1E1.413] [T1E1.413]
J. Bingham & F. Van der Putten, "Network and Customer J. Bingham & F. Van der Putten, "Network and Customer
Installation Interfaces - Asymmetric Digital Subscriber Installation Interfaces - Asymmetric Digital Subscriber
Line (ADSL) Metallic Interface. (T1.413 Issue 2)", Line (ADSL) Metallic Interface. (T1.413 Issue 2)",
ANSI T1E1.413-1998, June 1998. ANSI T1E1.413-1998, June 1998.
[TR-129] Adams, P., "Protocol Independent Object Model for Managing [TR-129] Adams, P., "Protocol Independent Object Model for Managing
VDSL2", DSL Forum TR-129, March 2005. VDSL2", DSL Forum TR-129, September 2006.
7.2. Informative References 7.2. Informative References
[RFC2662] Bathrick, G. and F. Ly, "Definitions of Managed Objects [RFC2662] Bathrick, G. and F. Ly, "Definitions of Managed Objects
for the ADSL Lines", RFC 2662, August 1999. for the ADSL Lines", RFC 2662, August 1999.
[RFC3410] Case, J., Mundy, R., Partain, D., and B. Stewart, [RFC3410] Case, J., Mundy, R., Partain, D., and B. Stewart,
"Introduction and Applicability Statements for Internet- "Introduction and Applicability Statements for Internet-
Standard Management Framework", RFC 3410, December 2002. Standard Management Framework", RFC 3410, December 2002.
skipping to change at page 164, line 5 skipping to change at page 180, line 5
Umberto Bonollo Umberto Bonollo
NEC Australia NEC Australia
649-655 Springvale Road 649-655 Springvale Road
Mulgrave, Victoria 3170 Mulgrave, Victoria 3170
Australia Australia
Phone: +61 3 9264 3385 Phone: +61 3 9264 3385
Fax: +61 3 9264 3892 Fax: +61 3 9264 3892
Email: umberto.bonollo@nec.com.au Email: umberto.bonollo@nec.com.au
Intellectual Property Statement Full Copyright Statement
Copyright (C) The Internet Society (2006).
This document is subject to the rights, licenses and restrictions
contained in BCP 78, and except as set forth therein, the authors
retain all their rights.
This document and the information contained herein are provided on an
"AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Intellectual Property
The IETF takes no position regarding the validity or scope of any The IETF takes no position regarding the validity or scope of any
Intellectual Property Rights or other rights that might be claimed to Intellectual Property Rights or other rights that might be claimed to
pertain to the implementation or use of the technology described in pertain to the implementation or use of the technology described in
this document or the extent to which any license under such rights this document or the extent to which any license under such rights
might or might not be available; nor does it represent that it has might or might not be available; nor does it represent that it has
made any independent effort to identify any such rights. Information made any independent effort to identify any such rights. Information
on the procedures with respect to rights in RFC documents can be on the procedures with respect to rights in RFC documents can be
found in BCP 78 and BCP 79. found in BCP 78 and BCP 79.
skipping to change at page 164, line 29 skipping to change at page 180, line 45
such proprietary rights by implementers or users of this such proprietary rights by implementers or users of this
specification can be obtained from the IETF on-line IPR repository at specification can be obtained from the IETF on-line IPR repository at
http://www.ietf.org/ipr. http://www.ietf.org/ipr.
The IETF invites any interested party to bring to its attention any The IETF invites any interested party to bring to its attention any
copyrights, patents or patent applications, or other proprietary copyrights, patents or patent applications, or other proprietary
rights that may cover technology that may be required to implement rights that may cover technology that may be required to implement
this standard. Please address the information to the IETF at this standard. Please address the information to the IETF at
ietf-ipr@ietf.org. ietf-ipr@ietf.org.
Disclaimer of Validity
This document and the information contained herein are provided on an
"AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY AND THE INTERNET
ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE
INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Copyright Statement
Copyright (C) The Internet Society (2006). This document is subject
to the rights, licenses and restrictions contained in BCP 78, and
except as set forth therein, the authors retain all their rights.
Acknowledgment Acknowledgment
Funding for the RFC Editor function is currently provided by the Funding for the RFC Editor function is provided by the IETF
Internet Society. Administrative Support Activity (IASA).
 End of changes. 259 change blocks. 
627 lines changed or deleted 1387 lines changed or added

This html diff was produced by rfcdiff 1.32. The latest version is available from http://www.levkowetz.com/ietf/tools/rfcdiff/