draft-ietf-adslmib-vdsl2-03.txt   draft-ietf-adslmib-vdsl2-04.txt 
Network Working Group M. Morgenstern Network Working Group M. Morgenstern
Internet-Draft ECI Telecom Ltd. Internet-Draft ECI Telecom Ltd.
Intended status: Standards Track S. Baillie Intended status: Standards Track S. Baillie
Expires: April 9, 2008 U. Bonollo Expires: August 1, 2008 U. Bonollo
NEC Australia NEC Australia
October 7, 2007 January 29, 2008
Definitions of Managed Objects for Very High Speed Digital Subscriber Definitions of Managed Objects for Very High Speed Digital Subscriber
Line 2 (VDSL2) Line 2 (VDSL2)
draft-ietf-adslmib-vdsl2-03.txt draft-ietf-adslmib-vdsl2-04.txt
Status of this Memo Status of this Memo
By submitting this Internet-Draft, each author represents that any By submitting this Internet-Draft, each author represents that any
applicable patent or other IPR claims of which he or she is aware applicable patent or other IPR claims of which he or she is aware
have been or will be disclosed, and any of which he or she becomes have been or will be disclosed, and any of which he or she becomes
aware will be disclosed, in accordance with Section 6 of BCP 79. aware will be disclosed, in accordance with Section 6 of BCP 79.
Internet-Drafts are working documents of the Internet Engineering Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF), its areas, and its working groups. Note that Task Force (IETF), its areas, and its working groups. Note that
skipping to change at page 1, line 37 skipping to change at page 1, line 37
and may be updated, replaced, or obsoleted by other documents at any and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress." material or to cite them other than as "work in progress."
The list of current Internet-Drafts can be accessed at The list of current Internet-Drafts can be accessed at
http://www.ietf.org/ietf/1id-abstracts.txt. http://www.ietf.org/ietf/1id-abstracts.txt.
The list of Internet-Draft Shadow Directories can be accessed at The list of Internet-Draft Shadow Directories can be accessed at
http://www.ietf.org/shadow.html. http://www.ietf.org/shadow.html.
This Internet-Draft will expire on April 9, 2008. This Internet-Draft will expire on August 1, 2008.
Copyright Notice Copyright Notice
Copyright (C) The IETF Trust (2007). Copyright (C) The IETF Trust (2008).
Abstract Abstract
This document defines a Management Information Base (MIB) module for This document defines a Management Information Base (MIB) module for
use with network management protocols in the IfQueueBlockernet use with network management protocols in the IfQueueBlockernet
community. In particular, it describes objects used for managing community. In particular, it describes objects used for managing
parameters of the "Very High Speed Digital Subscriber Line 2 (VDSL2)" parameters of the "Very High Speed Digital Subscriber Line 2 (VDSL2)"
interface type, which are also applicable for managing ADSL, ADSL2, interface type, which are also applicable for managing ADSL, ADSL2,
and ADSL2+ interfaces. and ADSL2+ interfaces.
Table of Contents Table of Contents
1. The Internet-Standard Management Framework . . . . . . . . . 3 1. The Internet-Standard Management Framework . . . . . . . . . 3
2. Overview . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2. Overview . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2.1. Relationship to other MIBs . . . . . . . . . . . . . . . 4 2.1. Relationship to other MIBs . . . . . . . . . . . . . . . 4
2.2. IANA Considerations . . . . . . . . . . . . . . . . . . . 7 2.2. IANA Considerations . . . . . . . . . . . . . . . . . . . 7
2.3. Conventions Used in the MIB Module . . . . . . . . . . . 7 2.3. Conventions Used in the MIB Module . . . . . . . . . . . 7
2.4. Structure . . . . . . . . . . . . . . . . . . . . . . . . 20 2.4. Structure . . . . . . . . . . . . . . . . . . . . . . . . 21
2.5. Persistence . . . . . . . . . . . . . . . . . . . . . . . 23 2.5. Persistence . . . . . . . . . . . . . . . . . . . . . . . 24
2.6. Line Topology . . . . . . . . . . . . . . . . . . . . . . 26 2.6. Line Topology . . . . . . . . . . . . . . . . . . . . . . 27
2.7. Counters, Interval Buckets, and Thresholds . . . . . . . 26 2.7. Counters, Interval Buckets, and Thresholds . . . . . . . 27
2.8. Profiles . . . . . . . . . . . . . . . . . . . . . . . . 28 2.8. Profiles . . . . . . . . . . . . . . . . . . . . . . . . 29
2.9. Notifications . . . . . . . . . . . . . . . . . . . . . . 32 2.9. Notifications . . . . . . . . . . . . . . . . . . . . . . 33
3. Definitions . . . . . . . . . . . . . . . . . . . . . . . . . 33 3. Definitions . . . . . . . . . . . . . . . . . . . . . . . . . 34
4. Implementation Analysis . . . . . . . . . . . . . . . . . . . 208 4. Implementation Analysis . . . . . . . . . . . . . . . . . . . 215
5. Security Considerations . . . . . . . . . . . . . . . . . . . 209 5. Security Considerations . . . . . . . . . . . . . . . . . . . 216
6. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . 217 6. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . 224
7. References . . . . . . . . . . . . . . . . . . . . . . . . . 217 7. References . . . . . . . . . . . . . . . . . . . . . . . . . 225
7.1. Normative References . . . . . . . . . . . . . . . . . . 217 7.1. Normative References . . . . . . . . . . . . . . . . . . 225
7.2. Informative References . . . . . . . . . . . . . . . . . 219 7.2. Informative References . . . . . . . . . . . . . . . . . 226
Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 219 Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 227
Intellectual Property and Copyright Statements . . . . . . . . . 221 Intellectual Property and Copyright Statements . . . . . . . . . 229
1. The Internet-Standard Management Framework 1. The Internet-Standard Management Framework
For a detailed overview of the documents that describe the current For a detailed overview of the documents that describe the current
Internet-Standard Management Framework, please refer to Section 7 of Internet-Standard Management Framework, please refer to Section 7 of
RFC 3410 [RFC3410]. RFC 3410 [RFC3410].
Managed objects are accessed via a virtual information store, termed Managed objects are accessed via a virtual information store, termed
the Management Information Base or MIB. MIB objects are generally the Management Information Base or MIB. MIB objects are generally
accessed through the Simple Network Management Protocol (SNMP). accessed through the Simple Network Management Protocol (SNMP).
skipping to change at page 3, line 51 skipping to change at page 3, line 51
[G.992.4], and [G.992.5] respectively). [G.992.4], and [G.992.5] respectively).
This document does not obsolete RFC 2662 [RFC2662], or RFC 4706 This document does not obsolete RFC 2662 [RFC2662], or RFC 4706
[RFC4706] but rather provides a more comprehensive management model [RFC4706] but rather provides a more comprehensive management model
that addresses the VDSL2 technology per G.993.2 ([G.993.2]) as well that addresses the VDSL2 technology per G.993.2 ([G.993.2]) as well
as ADSL, ADSL2 and ADSL2+ technologies. as ADSL, ADSL2 and ADSL2+ technologies.
Additionally, the management framework for VDSL2 lines [TR-129] Additionally, the management framework for VDSL2 lines [TR-129]
specified by the Digital Subscriber Line Forum (DSLF) has been taken specified by the Digital Subscriber Line Forum (DSLF) has been taken
into consideration. That framework is based on ITU-T G.997.1 into consideration. That framework is based on ITU-T G.997.1
standard [G.997.1]. standard [G.997.1] and its amendment 1 [G.997.1-Am1].
Note that the management model according to this document does not Note that the management model according to this document does not
allow managing VDSL technology per G.993.1 ([G.993.1]). VDSL lines allow managing VDSL technology per G.993.1 ([G.993.1]). VDSL lines
MUST be managed by RFC 3728 [RFC3728]. MUST be managed by RFC 3728 [RFC3728].
The MIB module is located in the MIB tree under MIB 2 transmission, The MIB module is located in the MIB tree under MIB 2 transmission,
as discussed in the MIB-2 Integration (RFC 2863 [RFC2863]) section of as discussed in the MIB-2 Integration (RFC 2863 [RFC2863]) section of
this document. this document.
2.1. Relationship to other MIBs 2.1. Relationship to other MIBs
skipping to change at page 9, line 13 skipping to change at page 9, line 13
the central office end (xTU-C). The upstream direction is the central office end (xTU-C). The upstream direction is
indicated by upstream(1). The downstream direction is a indicated by upstream(1). The downstream direction is a
transmission from the xTU-C towards the xTU-R. The downstream transmission from the xTU-C towards the xTU-R. The downstream
direction is indicated by downstream(2). direction is indicated by downstream(2).
upstream(1) - Transmission from the xTU-R to the xTU-C. upstream(1) - Transmission from the xTU-R to the xTU-C.
downstream(2) - Transmission from the xTU-C to the xTU-R. downstream(2) - Transmission from the xTU-C to the xTU-R.
o Xdsl2Band: o Xdsl2Band:
Attributes with this syntax uniquely identify a band in a VDSL2/ Attributes with this syntax uniquely identify a band in a ADSL,
ADSL/ADSL2/ADSL2+ link. For a band in the upstream direction, ADSL2, ADSL2+ or VDSL2 link. For a band in the upstream
transmission is from the remote end (xTU-R) towards the central direction, transmission is from the remote end (xTU-R) towards the
office end (xTU-C). A band in the upstream direction is indicated central office end (xTU-C). For a band in the downstream
by upstream(1) for ADSL/ADSL2/ADSL2+ single band, or any of direction, transmission is from the xTU-C towards the xTU-R. for
us0(3), us1(5), us2(7), us3(9), or us4(11) for VDSL2 multiple ADSL, ADSL2 and ADSL2+ which use a single band in the upstream
bands. For a band in the downstream direction, transmission is direction and a single band in the downstream direction the only
from the xTU-C towards the xTU-R. A band in the downstream relevant values are upstream(1) and downstream(2). For VDSL2,
direction is indicated by downstream(2) for ADSL/ADSL2/ADSL2+ that uses multiple bands in each transmission direction, a band in
single band, or any of ds1(4), ds2(6), ds3(8), or ds4(10) for the upstream direction is indicated by any of us0(3), us1(5),
VDSL2 multiple bands. us2(7), us3(9), or us4(11) and a band in the downstream direction
is indicated by any of ds1(4), ds2(6), ds3(8), or ds4(10). For
VDSL2 the values upstream(1) and downstream(2) may be used when
there is a need to refer to the whole upstream or downstream
traffic (e.g., report the average signal-to-noise ratio on any
transmission direction).
upstream(1) - Transmission from the ATU-R to the ATU-C upstream(1) - Transmission from the xTU-R to the xTU-C
(ADSL/ADSL2/ADSL2+). (refers to the single upstream band for
downstream(2) - Transmission from the ATU-C to the ATU-R ADSL/ADSL2/ADSL2+ ot to the whole
(ADSL/ADSL2/ADSL2+). upstream traffic for VDSL2).
downstream(2) - Transmission from the xTU-C to the xTU-R
(refers to the single downstream band for
ADSL/ADSL2/ADSL2+ ot to the whole
downstream traffic for VDSL2).
us0(3) - Upstream band number 0 (US0) (VDSL2). us0(3) - Upstream band number 0 (US0) (VDSL2).
ds1(4) - Downstream band number 1 (DS1) (VDSL2). ds1(4) - Downstream band number 1 (DS1) (VDSL2).
us1(5) - Upstream band number 1 (US1) (VDSL2). us1(5) - Upstream band number 1 (US1) (VDSL2).
ds2(6) - Downstream band number 2 (DS2) (VDSL2). ds2(6) - Downstream band number 2 (DS2) (VDSL2).
us2(7) - Upstream band number 2 (US2) (VDSL2). us2(7) - Upstream band number 2 (US2) (VDSL2).
ds3(8) - Downstream band number 3 (DS3) (VDSL2). ds3(8) - Downstream band number 3 (DS3) (VDSL2).
us3(9) - Upstream band number 3 (US3) (VDSL2). us3(9) - Upstream band number 3 (US3) (VDSL2).
ds4(10) - Downstream band number 4 (DS4) (VDSL2). ds4(10) - Downstream band number 4 (DS4) (VDSL2).
us4(11) - Upstream band number 4 (US4) (VDSL2). us4(11) - Upstream band number 4 (US4) (VDSL2).
skipping to change at page 10, line 28 skipping to change at page 10, line 37
noFail (0) - Successful initialization noFail (0) - Successful initialization
configError (1) - Configuration failure configError (1) - Configuration failure
configNotFeasible (2) - Configuration details not supported configNotFeasible (2) - Configuration details not supported
commFail (3) - Communication failure commFail (3) - Communication failure
noPeerAtu (4) - Peer ATU not detected noPeerAtu (4) - Peer ATU not detected
otherCause (5) - Other initialization failure reason otherCause (5) - Other initialization failure reason
o Xdsl2OperationModes: o Xdsl2OperationModes:
Attributes with this syntax uniquely identify an ADSL mode, which Attributes with this syntax uniquely identify an xDSL mode, which
is a category associated with each transmission mode defined for is a category associated with each transmission mode defined for
the VDSL2/ADSL/ADSL2 or ADSL2+ link. Part of the line the VDSL2/ADSL/ADSL2 or ADSL2+ link. Part of the line
configuration profile depends on the ADSL Mode: configuration profile depends on the xDSL Mode:
Specified as an enumeration construct, there are currently a few Specified as an enumeration construct, there are currently a few
dozen transmission modes in the list. dozen transmission modes in the list.
o Xdsl2PowerMngState: o Xdsl2PowerMngState:
Attributes with this syntax uniquely identify each power Attributes with this syntax uniquely identify each power
management state defined for the VDSL2/ADSL/ADSL2 or ADSL2+ link. management state defined for the VDSL2/ADSL/ADSL2 or ADSL2+ link.
For VDSL2 links only L0 and L3 states are supported: For VDSL2 links only L0 and L3 states are supported:
skipping to change at page 14, line 6 skipping to change at page 14, line 6
profile17a (6) - Profile 17a profile17a (6) - Profile 17a
profile30a (7) - Profile 30a profile30a (7) - Profile 30a
o Xdsl2LineClassMask: o Xdsl2LineClassMask:
Attributes with this syntax are configuration parameters that Attributes with this syntax are configuration parameters that
specify the VDSL2 PSD Mask Class for a selected VDSL2 transmission specify the VDSL2 PSD Mask Class for a selected VDSL2 transmission
mode. The following classes are defined: mode. The following classes are defined:
none (1) - VDSL2 PSD Mask Class is unknown/irrelevant. none (1) - VDSL2 PSD Mask Class is unknown/irrelevant.
a998ORb997M1cORc998 (2) - For ITU-T G.993.2 Annex A and C this a998ORb997M1cORc998B (2)-
is the only applicable PSD class. For ITU-T G.993.2 Annex A this is the
only applicable PSD class.
ITU-T G.993.2 Annex B: 997-M1c-A-7 ITU-T G.993.2 Annex B: 997-M1c-A-7
b997M1x (3) - ITU-T G.993.2 Annex B: 997-M1x-M-8 or 997-M1x-M ITU-T G.993.2 Annex C: 998-B (POTS-138b,
b997M2x (4) - ITU-T G.993.2 Annex B: 998-M1x-A, 998-M1x-B, POTS-276b, TCM-ISDN)
or 997-M2x-M b997M1xOR998co (3) -
b998M1x (5) - ITU-T G.993.2 Annex B: 997-M2x-M-8, 997-M2x-A, ITU-T G.993.2 Annex B: 997-M1x-M-8 or
or 998-M1x-NUS0 997-M1x-M
ITU-T G.993.2 Annex C: 998-CO (POTS-138co,
POTS-276co)
b997M2x (4) - ITU-T G.993.2 Annex B: 997-M2x-M-8, 997-M2x-A,
997-M2x-M, 997E17-M2x-NUS0, 997E30-M2x-NUS0
b998M1x (5) - ITU-T G.993.2 Annex B: 998-M1x-A, 998-M1x-B,
998-M1x-NUS0
b998M2x (6) - ITU-T G.993.2 Annex B: 998-M2x-A, 998-M2x-M, b998M2x (6) - ITU-T G.993.2 Annex B: 998-M2x-A, 998-M2x-M,
998-M2x-B, or 998-M2x-NUS0 998-M2x-B, 998-M2x-NUS0, 998E17-M2x-NUS0,
998E17-M2x-NUS0-M, 998E30-M2x-NUS0,
998E30-M2x-NUS0-M
b998AdeM2x(7)- ITU-T G.993.2 Annex B: 998-M2x-A, 998-M2x-M,
998-M2x-B, 998-M2x-NUS0, 998ADE17-M2x-A,
998ADE17-M2x-B, 998ADE17-M2x-NUS0-M,
998ADE30-M2x-NUS0-A, 998ADE30-M2x-NUS0-M
bHpeM1 (8) - ITU-T G.993.2 Annex B: HPE17-M1-NUS0,
HPE30-M1-NUS0
o Xdsl2LineLimitMask: o Xdsl2LineLimitMask:
Attributes with this syntax are configuration parameters that Attributes with this syntax are configuration parameters that
specify the VDSL2 PSD Limit Mask for each PSD Mask Class and specify the VDSL2 PSD Limit Mask for each PSD Mask Class and
implementation profile. The VDSL2 implementation profiles are implementation profile. The VDSL2 implementation profiles are
grouped into 4 classes and each is allocated 16 PSD Limit Mask grouped into 4 classes and each is allocated 16 PSD Limit Mask
values in this textual convention. values in this textual convention.
o Xdsl2LineUs0Disable: o Xdsl2LineUs0Disable:
skipping to change at page 14, line 38 skipping to change at page 15, line 4
indicate if US0 (upstream band number 0) is disabled for each indicate if US0 (upstream band number 0) is disabled for each
limit PSD mask. The VDSL2 implementation profiles are grouped limit PSD mask. The VDSL2 implementation profiles are grouped
into 4 classes and each is allocated 16 values in this textual into 4 classes and each is allocated 16 values in this textual
convention. convention.
o Xdsl2LineUs0Mask: o Xdsl2LineUs0Mask:
Attributes with this syntax are configuration parameters for ITU-T Attributes with this syntax are configuration parameters for ITU-T
G.993.2 Annex A transmission mode that specify the US0 PSD masks G.993.2 Annex A transmission mode that specify the US0 PSD masks
to be allowed by the near-end xTU on the line. It is a bit map to be allowed by the near-end xTU on the line. It is a bit map
that supports 18 possible US0 masks. that supports 20 possible US0 masks.
o Xdsl2SymbolProtection: o Xdsl2SymbolProtection:
Attributes with this syntax are configuration parameters that Attributes with this syntax are configuration parameters that
reference the minimum length impulse noise protection (INP) in reference the minimum length impulse noise protection (INP) in
terms of number of symbols (subcarrier spacing of 4.3125 kHz): terms of number of symbols (subcarrier spacing of 4.3125 kHz):
noProtection (1) - INP not required noProtection (1) - INP not required
halfSymbol (2) - INP length = 1/2 symbol halfSymbol (2) - INP length = 1/2 symbol
singleSymbol (3) - INP length = 1 symbol singleSymbol (3) - INP length = 1 symbol
skipping to change at page 16, line 9 skipping to change at page 16, line 32
o Xdsl2MaxBer: o Xdsl2MaxBer:
Attributes with this syntax are configuration parameters that Attributes with this syntax are configuration parameters that
reference the maximum Bit Error Rate (BER): reference the maximum Bit Error Rate (BER):
eminus3 (1) - Maximum BER=E^-3 eminus3 (1) - Maximum BER=E^-3
eminus5 (2) - Maximum BER=E^-5 eminus5 (2) - Maximum BER=E^-5
eminus7 (3) - Maximum BER=E^-7 eminus7 (3) - Maximum BER=E^-7
o Xdsl2ChInitPolicy:
This syntax serves for channel configuration parameters that
reference the channel initialization policy.
policy0 (1) - Policy 0 according to the applicable standard.
policy1 (2) - Policy 1 according to the applicable standard.
o Xdsl2ScMaskDs: o Xdsl2ScMaskDs:
Attributes with this syntax are configuration parameters that Attributes with this syntax are configuration parameters that
reference the downstream sub-carrier mask. It is a bitmap of up reference the downstream sub-carrier mask. It is a bitmap of up
to 4096 bits. to 4096 bits.
o Xdsl2ScMaskUs: o Xdsl2ScMaskUs:
Attributes with this syntax are configuration parameters that Attributes with this syntax are configuration parameters that
reference the upstream sub- carrier mask. It is a bitmap of up to reference the upstream sub- carrier mask. It is a bitmap of up to
skipping to change at page 19, line 25 skipping to change at page 20, line 4
adlu32Eu32 (1), - ADLU-32 / EU-32 adlu32Eu32 (1), - ADLU-32 / EU-32
adlu36Eu36 (2), - ADLU-36 / EU-36 adlu36Eu36 (2), - ADLU-36 / EU-36
adlu40Eu40 (3), - ADLU-40 / EU-40 adlu40Eu40 (3), - ADLU-40 / EU-40
adlu44Eu44 (4), - ADLU-44 / EU-44 adlu44Eu44 (4), - ADLU-44 / EU-44
adlu48Eu48 (5), - ADLU-48 / EU-48 adlu48Eu48 (5), - ADLU-48 / EU-48
adlu52Eu52 (6), - ADLU-52 / EU-52 adlu52Eu52 (6), - ADLU-52 / EU-52
adlu56Eu56 (7), - ADLU-56 / EU-56 adlu56Eu56 (7), - ADLU-56 / EU-56
adlu60Eu60 (8), - ADLU-60 / EU-60 adlu60Eu60 (8), - ADLU-60 / EU-60
adlu64Eu64 (9) - ADLU-64 / EU-61 adlu64Eu64 (9) - ADLU-64 / EU-61
o Xdsl2LineCeFlag: o Xdsl2LineCeFlag:
Attributes with this syntax are configuration parameters that Attributes with this syntax are configuration parameters that
control control the optional cyclic extension values
enableCyclicExtension (0) - Enable use of optional enableCyclicExtension (0) - Enable use of optional
Cyclic Extension values. Cyclic Extension values.
o Xdsl2LineSnrMode o Xdsl2LineSnrMode
Attributes with this syntax are parameters related to the enabling Attributes with this syntax are parameters related to the enabling
and disabling of transmitter referred virtual noise. and disabling of transmitter referred virtual noise.
virtualNoiseDisabled (1) - virtual noise is disabled. virtualNoiseDisabled (1) - virtual noise is disabled.
skipping to change at page 20, line 30 skipping to change at page 21, line 11
forceFramerForInp (0) - Select framer setting to satisfy forceFramerForInp (0) - Select framer setting to satisfy
impulse noise protection requirements. impulse noise protection requirements.
o Xdsl2BitsAlloc: o Xdsl2BitsAlloc:
Attributes with this syntax are status parameters that report the Attributes with this syntax are status parameters that report the
bits allocation for each sub-carrier. The bits allocation for a bits allocation for each sub-carrier. The bits allocation for a
sub-carrier is in the range 0 to 15. sub-carrier is in the range 0 to 15.
o Xdsl2MrefPsdDs:
Attributes with this syntax are MEDLEY Reference PSD status
parameters on downstream direction. It is expressed as the set of
breakpoints exchanged at initialization. The OCTET STRING
contains up to 48 pairs of values in the following structure:
Octets 0&1 -- Index of 1st subcarrier used in the context of a
first breakpoint. Octets 2&3 -- The PSD level for the subcarrier
indicated in octets 0&1. Octets 4-7 -- Same, for a 2nd breakpoint
Octets 8-11 -- Same, for a 3rd breakpoint And so on until Octets
188-191 -- Same, for a 48th breakpoint. Each subcarrier index is
an unsigned number in the range 1 and NSds (i.e., highest
supported sub carrier index on downstream direction). The PSD
level is an integer value in the 0 to 4095 range. It is
represented in units of 0.1 dB offset from -140dBm/Hz.
o Xdsl2MrefPsdUs :
Attributes with this syntax are MEDLEY Reference PSD status
parameters on upstream direction. It is expressed as the set of
breakpoints exchanged at initialization. The OCTET STRING
contains up to 32 pairs of values in the following structure:
Octets 0&1 -- Index of 1st subcarrier used in the context of a
first breakpoint. Octets 2&3 -- The PSD level for the subcarrier
indicated in octets 0&1. Octets 4-7 -- Same, for a 2nd breakpoint
Octets 8-11 -- Same, for a 3rd breakpoint And so on until Octets
124-127 -- Same, for a 32nd breakpoint. Each subcarrier index is
an unsigned number in the range 1 and NSus (i.e., highest
supported sub carrier index on upstream direction). The PSD level
is an integer value in the 0 to 4095 range. It is represented in
units of 0.1 dB offset from -140dBm/Hz.
2.4. Structure 2.4. Structure
The MIB module is structured into following MIB groups: The MIB module is structured into following MIB groups:
o Line Configuration, Maintenance, and Status Group: o Line Configuration, Maintenance, and Status Group:
This group supports MIB objects for configuring parameters for the This group supports MIB objects for configuring parameters for the
VDSL2/ADSL/ADSL2 or ADSL2+ line and retrieving line status VDSL2/ADSL/ADSL2 or ADSL2+ line and retrieving line status
information. It also supports MIB objects for configuring a information. It also supports MIB objects for configuring a
requested power state or initiating a Dual Ended Line Test (DELT) requested power state or initiating a Dual Ended Line Test (DELT)
skipping to change at page 23, line 29 skipping to change at page 24, line 29
- xdsl2LinePerfFailedFullInitThresh - xdsl2LinePerfFailedFullInitThresh
- xdsl2LinePerfFailedShortInitThresh - xdsl2LinePerfFailedShortInitThresh
- xdsl2LineStatusChangeXtuc - xdsl2LineStatusChangeXtuc
- xdsl2LineStatusChangeXtur - xdsl2LineStatusChangeXtur
2.5. Persistence 2.5. Persistence
All read-create objects and most read-write objects defined in this All read-create objects and most read-write objects defined in this
MIB module SHOULD be stored persistently. Following is an exhaustive MIB module SHOULD be stored persistently. Following is an exhaustive
list of these persistent objects: list of these persistent objects:
------***************************************************** ------The
following list will probably be partially changed
------*****************************************************
xdsl2LineCnfgTemplate xdsl2LineCnfgTemplate
xdsl2LineAlarmCnfgTemplate xdsl2LineAlarmCnfgTemplate
xdsl2LineCmndConfPmsf xdsl2LineCmndConfPmsf
xdsl2LConfTempTemplateName xdsl2LConfTempTemplateName
xdsl2LConfTempLineProfile xdsl2LConfTempLineProfile
xdsl2LConfTempChan1ConfProfile xdsl2LConfTempChan1ConfProfile
xdsl2LConfTempChan1RaRatioDs xdsl2LConfTempChan1RaRatioDs
xdsl2LConfTempChan1RaRatioUs xdsl2LConfTempChan1RaRatioUs
xdsl2LConfTempChan2ConfProfile xdsl2LConfTempChan2ConfProfile
skipping to change at page 25, line 32 skipping to change at page 26, line 29
xdsl2ChConfProfMaxDelayUs xdsl2ChConfProfMaxDelayUs
xdsl2ChConfProfMinProtectionDs xdsl2ChConfProfMinProtectionDs
xdsl2ChConfProfMinProtectionUs xdsl2ChConfProfMinProtectionUs
xdsl2ChConfProfMaxBerDs xdsl2ChConfProfMaxBerDs
xdsl2ChConfProfMaxBerUs xdsl2ChConfProfMaxBerUs
xdsl2ChConfProfUsDataRateDs xdsl2ChConfProfUsDataRateDs
xdsl2ChConfProfDsDataRateDs xdsl2ChConfProfDsDataRateDs
xdsl2ChConfProfUsDataRateUs xdsl2ChConfProfUsDataRateUs
xdsl2ChConfProfDsDataRateUs xdsl2ChConfProfDsDataRateUs
xdsl2ChConfProfImaEnabled xdsl2ChConfProfImaEnabled
xdsl2ChConfProfMaxDelayVar
xdsl2ChConfProfInitPolicy
xdsl2ChConfProfRowStatus xdsl2ChConfProfRowStatus
xdsl2LAlarmConfTempTemplateName xdsl2LAlarmConfTempTemplateName
xdsl2LAlarmConfTempLineProfile xdsl2LAlarmConfTempLineProfile
xdsl2LAlarmConfTempChan1ConfProfile xdsl2LAlarmConfTempChan1ConfProfile
xdsl2LAlarmConfTempChan2ConfProfile xdsl2LAlarmConfTempChan2ConfProfile
xdsl2LAlarmConfTempChan3ConfProfile xdsl2LAlarmConfTempChan3ConfProfile
xdsl2LAlarmConfTempChan4ConfProfile xdsl2LAlarmConfTempChan4ConfProfile
xdsl2LAlarmConfTempRowStatus xdsl2LAlarmConfTempRowStatus
xdsl2LineAlarmConfProfileName xdsl2LineAlarmConfProfileName
xdsl2LineAlarmConfProfileXtucThresh15MinFecs xdsl2LineAlarmConfProfileXtucThresh15MinFecs
skipping to change at page 31, line 44 skipping to change at page 32, line 39
Profiles and templates are created, assigned, and deleted dynamically Profiles and templates are created, assigned, and deleted dynamically
using the profile name and profile row status in each of the profile using the profile name and profile row status in each of the profile
tables. tables.
If the implementation allows modifying a profile or template while it If the implementation allows modifying a profile or template while it
is associated with a line, then such changes MUST take effect is associated with a line, then such changes MUST take effect
immediately. These changes MAY result in a restart (hard reset or immediately. These changes MAY result in a restart (hard reset or
soft restart) of the units on the line. soft restart) of the units on the line.
Network Elements may optionaly implement a fallback line
configuration template ( See xdsl2LineCnfgFallbackTemplate ). The
fallback template will be tried if the xDSL2 line fails to operate
using the primary template. If the xDSL2 line fails to operate using
the fallback template then the primary template should be retried.
The xTU-C should continue to alternate between the primary and
fallback templates until one of them succeeds.
2.8.4. Managing Multiple Bearer Channels 2.8.4. Managing Multiple Bearer Channels
The number of bearer channels is configured by setting the template The number of bearer channels is configured by setting the template
attributes xdsl2LConfTempChan1ConfProfile, attributes xdsl2LConfTempChan1ConfProfile,
xdsl2LConfTempChan2ConfProfile, xdsl2LConfTempChan3ConfProfile, and xdsl2LConfTempChan2ConfProfile, xdsl2LConfTempChan3ConfProfile, and
xdsl2LConfTempChan4ConfProfile and then assigning that template to a xdsl2LConfTempChan4ConfProfile and then assigning that template to a
DSL line using the xdsl2LineCnfgTemplate attribute. When the number DSL line using the xdsl2LineCnfgTemplate attribute. When the number
of bearer channels for a DSL line changes, the SNMP agent will of bearer channels for a DSL line changes, the SNMP agent will
automatically create or destroy rows in channel-related tables automatically create or destroy rows in channel-related tables
associated with that line. For example, when a DSL line is operating associated with that line. For example, when a DSL line is operating
skipping to change at page 33, line 46 skipping to change at page 35, line 4
IMPORTS IMPORTS
MODULE-IDENTITY, MODULE-IDENTITY,
transmission transmission
FROM SNMPv2-SMI FROM SNMPv2-SMI
TEXTUAL-CONVENTION TEXTUAL-CONVENTION
FROM SNMPv2-TC; FROM SNMPv2-TC;
vdsl2TCMIB MODULE-IDENTITY vdsl2TCMIB MODULE-IDENTITY
LAST-UPDATED "200710070000Z" -- October 7, 2007 LAST-UPDATED "200801290000Z" -- January 29, 2008
ORGANIZATION "ADSLMIB Working Group" ORGANIZATION "ADSLMIB Working Group"
CONTACT-INFO "WG-email: adslmib@ietf.org CONTACT-INFO "WG-email: adslmib@ietf.org
Info: https://www1.ietf.org/mailman/listinfo/adslmib Info: https://www1.ietf.org/mailman/listinfo/adslmib
Chair: Mike Sneed Chair: Mike Sneed
Sand Channel Systems Sand Channel Systems
Postal: P.O. Box 37324 Postal: P.O. Box 37324
Raleigh NC 27627-732 Raleigh NC 27627-732
Email: sneedmike@hotmail.com Email: sneedmike@hotmail.com
Phone: +1 206 600 7022 Phone: +1 206 600 7022
skipping to change at page 35, line 5 skipping to change at page 36, line 6
Mulgrave, Victoria 3170, Mulgrave, Victoria 3170,
Australia. Australia.
Email: umberto.bonollo@nec.com.au Email: umberto.bonollo@nec.com.au
Phone: +61 3 9264 3385 Phone: +61 3 9264 3385
" "
DESCRIPTION DESCRIPTION
"This MIB Module provides Textual Conventions to be "This MIB Module provides Textual Conventions to be
used by the VDSL2-LINE-MIB module for the purpose of used by the VDSL2-LINE-MIB module for the purpose of
managing VDSL2, ADSL, ADSL2 and ADSL2+ lines. managing VDSL2, ADSL, ADSL2 and ADSL2+ lines.
Copyright (C) The Internet Society (2007). This version of Copyright (C) The IETF Trust (2008). This version of
this MIB module is part of RFC XXXX: see the RFC itself for this MIB module is part of RFC XXXX: see the RFC itself for
full legal notices." full legal notices."
-- RFC Ed.: replace XXXX with assigned number & remove this note -- RFC Ed.: replace XXXX with assigned number & remove this note
REVISION "200710070000Z" -- October 7, 2007 REVISION "200801290000Z" -- January 29, 2008
DESCRIPTION "Initial version, published as RFC XXXX." DESCRIPTION "Initial version, published as RFC XXXX."
-- RFC Ed.: replace XX with assigned number & remove this note -- RFC Ed.: replace XX with assigned number & remove this note
::= { transmission xxx 2} -- vdsl2MIB 2 ::= { transmission xxx 2} -- vdsl2MIB 2
-- IANA, the xxx here must be the same as the one assigned -- IANA, the xxx here must be the same as the one assigned
-- to the vdsl2MIB below. -- to the vdsl2MIB below.
-- RFC Ed.: Please fill in xxx once assigned by IANA. -- RFC Ed.: Please fill in xxx once assigned by IANA.
------------------------------------------------ ------------------------------------------------
-- Textual Conventions -- -- Textual Conventions --
------------------------------------------------ ------------------------------------------------
skipping to change at page 36, line 17 skipping to change at page 37, line 18
SYNTAX INTEGER { SYNTAX INTEGER {
upstream(1), -- Transmission from the xTU-R to the xTU-C. upstream(1), -- Transmission from the xTU-R to the xTU-C.
downstream(2) -- Transmission from the xTU-C to the xTU-R. downstream(2) -- Transmission from the xTU-C to the xTU-R.
} }
Xdsl2Band ::= TEXTUAL-CONVENTION Xdsl2Band ::= TEXTUAL-CONVENTION
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Identifies a band in a "Identifies a band in a
VDSL2/ADSL/ADSL2/ADSL2+ VDSL2/ADSL/ADSL2/ADSL2+
link. For a band in the upstream direction, link.
For a band in the upstream direction,
transmission is from the remote end (xTU-R) transmission is from the remote end (xTU-R)
towards the central office end (xTU-C). towards the central office end (xTU-C).
A band in the upstream direction is
indicated by upstream(1) for
ADSL/ADSL2/ADSL2+ single band, or any of
us0(3), us1(5), us2(7), us3(9), or us4(11) for
VDSL2 multiple bands.
For a band in the downstream direction, For a band in the downstream direction,
transmission is from the xTU-C towards the xTU-R. transmission is from the xTU-C towards the
A band in the downstream direction is xTU-R.
indicated by downstream(2) for for ADSL, ADSL2 and ADSL2+ which use a
ADSL/ADSL2/ADSL2+ single band, or any of single band in the upstream direction and a
ds1(4), ds2(6), ds3(8), or ds4(10) for single band in the downstream direction the only
VDSL2 multiple bands. relevant values are upstream(1) and downstream(2).
For VDSL2, that uses multiple bands in each
transmission direction, a band
in the upstream direction is indicated by any
of us0(3), us1(5), us2(7), us3(9), or us4(11) and
a band in the downstream direction is indicated
by any of ds1(4), ds2(6), ds3(8), or ds4(10).
For VDSL2 the values upstream(1) and downstream(2)
may be used when there is a need to refer to the
whole upstream or downstream traffic (e.g., report
the average signal-to-noise ratio on any transmission
direction).
Specified as an INTEGER, Specified as an INTEGER,
the values are defined as follows:" the values are defined as follows:"
SYNTAX INTEGER { SYNTAX INTEGER {
upstream(1), -- Transmission from the ATU-R to the ATU-C upstream(1), -- Transmission from the xTU-R to the xTU-C
-- (ADSL/ADSL2/ADSL2+). -- (refers to the single upstream band for
downstream(2), -- Transmission from the ATU-C to the ATU-R -- ADSL/ADSL2/ADSL2+ ot to the whole
--(ADSL/ADSL2/ADSL2+). -- upstream traffic for VDSL2).
downstream(2), -- Transmission from the xTU-C to the xTU-R
-- (refers to the single downstream band
-- for ADSL/ADSL2/ADSL2+ ot to the whole
-- downstream traffic for VDSL2).
us0(3), -- Upstream band number 0 (US0) (VDSL2). us0(3), -- Upstream band number 0 (US0) (VDSL2).
ds1(4), -- Downstream band number 1 (DS1) (VDSL2). ds1(4), -- Downstream band number 1 (DS1) (VDSL2).
us1(5), -- Upstream band number 1 (US1) (VDSL2). us1(5), -- Upstream band number 1 (US1) (VDSL2).
ds2(6), -- Downstream band number 2 (DS2) (VDSL2). ds2(6), -- Downstream band number 2 (DS2) (VDSL2).
us2(7), -- Upstream band number 2 (US2) (VDSL2). us2(7), -- Upstream band number 2 (US2) (VDSL2).
ds3(8), -- Downstream band number 3 (DS3) (VDSL2). ds3(8), -- Downstream band number 3 (DS3) (VDSL2).
us3(9), -- Upstream band number 3 (US3) (VDSL2). us3(9), -- Upstream band number 3 (US3) (VDSL2).
ds4(10), -- Downstream band number 4 (DS4) (VDSL2). ds4(10), -- Downstream band number 4 (DS4) (VDSL2).
us4(11) -- Upstream band number 4 (US4) (VDSL2). us4(11) -- Upstream band number 4 (US4) (VDSL2).
} }
skipping to change at page 38, line 22 skipping to change at page 39, line 35
Bit 59-63: Reserved" Bit 59-63: Reserved"
SYNTAX BITS { SYNTAX BITS {
ansit1413(0), ansit1413(0),
etsi(1), etsi(1),
g9921PotsNonOverlapped(2), g9921PotsNonOverlapped(2),
g9921PotsOverlapped(3), g9921PotsOverlapped(3),
g9921IsdnNonOverlapped(4), g9921IsdnNonOverlapped(4),
g9921isdnOverlapped(5), g9921isdnOverlapped(5),
g9921tcmIsdnNonOverlapped(6), g9921tcmIsdnNonOverlapped(6),
g9921tcmIsdnOverlapped(7), g9921tcmIsdnOverlapped(7),
g9922potsNonOverlapeed(8), g9922potsNonOverlapped(8),
g9922potsOverlapped(9), g9922potsOverlapped(9),
g9922tcmIsdnNonOverlapped(10), g9922tcmIsdnNonOverlapped(10),
g9922tcmIsdnOverlapped(11), g9922tcmIsdnOverlapped(11),
g9921tcmIsdnSymmetric(12), g9921tcmIsdnSymmetric(12),
reserved1(13), reserved1(13),
reserved2(14), reserved2(14),
reserved3(15), reserved3(15),
reserved4(16), reserved4(16),
reserved5(17), reserved5(17),
g9923PotsNonOverlapped(18), g9923PotsNonOverlapped(18),
g9923PotsOverlapped(19), g9923PotsOverlapped(19),
g9923IsdnNonOverlapped(20), g9923IsdnNonOverlapped(20),
g9923isdnOverlapped(21), g9923isdnOverlapped(21),
reserved6(22), reserved6(22),
reserved7(23), reserved7(23),
g9924potsNonOverlapeed(24), g9924potsNonOverlapped(24),
g9924potsOverlapped(25), g9924potsOverlapped(25),
reserved8(26), reserved8(26),
reserved9(27), reserved9(27),
g9923AnnexIAllDigNonOverlapped(28), g9923AnnexIAllDigNonOverlapped(28),
g9923AnnexIAllDigOverlapped(29), g9923AnnexIAllDigOverlapped(29),
g9923AnnexJAllDigNonOverlapped(30), g9923AnnexJAllDigNonOverlapped(30),
g9923AnnexJAllDigOverlapped(31), g9923AnnexJAllDigOverlapped(31),
g9924AnnexIAllDigNonOverlapped(32), g9924AnnexIAllDigNonOverlapped(32),
g9924AnnexIAllDigOverlapped(33), g9924AnnexIAllDigOverlapped(33),
g9923AnnexLMode1NonOverlapped(34), g9923AnnexLMode1NonOverlapped(34),
skipping to change at page 40, line 39 skipping to change at page 42, line 4
PSD Configuration object in the xDSL Line Profile. The PSD Configuration object in the xDSL Line Profile. The
following classes of xDSL operating mode are defined. following classes of xDSL operating mode are defined.
The notes (F) and (L) denote Full-Rate and Lite/splitterless The notes (F) and (L) denote Full-Rate and Lite/splitterless
respectively: respectively:
+-------+--------------------------------------------------+ +-------+--------------------------------------------------+
| Value | xDSL operation mode description | | Value | xDSL operation mode description |
+-------+--------------------------------------------------+ +-------+--------------------------------------------------+
1 - The default/generic PSD configuration. Default 1 - The default/generic PSD configuration. Default
configuration will be used when no other matching configuration will be used when no other matching
mode specific configuration can be found. mode specific configuration can be found.
2 - ADSL family. The attributes included in the Mode-
Specific PSD Configuration are irrelevant for 2 - Regional Std. (ANSI T1.413) (F)
ITU-T G.992.1 and G.992.2 ADSL modes. Hence, it 3 - Regional Std. (ETSI DTS/TM06006) (F)
is possible to map those modes to this generic 4 - G.992.1 POTS non-overlapped (F)
class. 5 - G.992.1 POTS overlapped (F)
3-7 - Unused. Reserved for future ITU-T specification. 6 - G.992.1 ISDN non-overlapped (F)
8 - G.992.3 POTS non-overlapped (F) 7 - G.992.1 ISDN overlapped (F)
9 - G.992.3 POTS overlapped (F) 8 - G.992.1 TCM-ISDN non-overlapped (F)
10 - G.992.3 ISDN non-overlapped (F) 9 - G.992.1 TCM-ISDN overlapped (F)
11 - G.992.3 ISDN overlapped (F) 10 - G.992.2 POTS non-overlapped (L)
12-13 - Unused. Reserved for future ITU-T specification. 11 - G.992.2 POTS overlapped (L)
14 - G.992.4 POTS non-overlapped (L) 12 - G.992.2 with TCM-ISDN non-overlapped (L)
15 - G.992.4 POTS overlapped (L) 13 - G.992.2 with TCM-ISDN overlapped (L)
16-17 - Unused. Reserved for future ITU-T specification. 14 - G.992.1 TCM-ISDN symmetric (F) --- not in G.997.1
18 - G.992.3 Annex I All-Digital non-overlapped (F) 15-19 - Unused. Reserved for future ITU-T specification.
19 - G.992.3 Annex I All-Digital overlapped (F) 20 - G.992.3 POTS non-overlapped (F)
20 - G.992.3 Annex J All-Digital non-overlapped (F) 21 - G.992.3 POTS overlapped (F)
21 - G.992.3 Annex J All-Digital overlapped (F) 22 - G.992.3 ISDN non-overlapped (F)
22 - G.992.4 Annex I All-Digital non-overlapped (L) 23 - G.992.3 ISDN overlapped (F)
23 - G.992.4 Annex I All-Digital overlapped (L) 24-25 - Unused. Reserved for future ITU-T specification.
24 - G.992.3 Annex L POTS non-overlapped, mode 1, 26 - G.992.4 POTS non-overlapped (L)
27 - G.992.4 POTS overlapped (L)
28-29 - Unused. Reserved for future ITU-T specification.
30 - G.992.3 Annex I All-Digital non-overlapped (F)
31 - G.992.3 Annex I All-Digital overlapped (F)
32 - G.992.3 Annex J All-Digital non-overlapped (F)
33 - G.992.3 Annex J All-Digital overlapped (F)
34 - G.992.4 Annex I All-Digital non-overlapped (L)
35 - G.992.4 Annex I All-Digital overlapped (L)
36 - G.992.3 Annex L POTS non-overlapped, mode 1,
wide U/S (F) wide U/S (F)
25 - G.992.3 Annex L POTS non-overlapped, mode 2, 37 - G.992.3 Annex L POTS non-overlapped, mode 2,
narrow U/S(F) narrow U/S(F)
26 - G.992.3 Annex L POTS overlapped, mode 3, 38 - G.992.3 Annex L POTS overlapped, mode 3,
wide U/S (F) wide U/S (F)
27 - G.992.3 Annex L POTS overlapped, mode 4, 39 - G.992.3 Annex L POTS overlapped, mode 4,
narrow U/S (F) narrow U/S (F)
28 - G.992.3 Annex M POTS non-overlapped (F) 40 - G.992.3 Annex M POTS non-overlapped (F)
29 - G.992.3 Annex M POTS overlapped (F) 41 - G.992.3 Annex M POTS overlapped (F)
30 - G.992.5 POTS non-overlapped (F) 42 - G.992.5 POTS non-overlapped (F)
31 - G.992.5 POTS overlapped (F) 43 - G.992.5 POTS overlapped (F)
32 - G.992.5 ISDN non-overlapped (F) 44 - G.992.5 ISDN non-overlapped (F)
33 - G.992.5 ISDN overlapped (F) 45 - G.992.5 ISDN overlapped (F)
34-35 - Unused. Reserved for future ITU-T specification. 46-47 - Unused. Reserved for future ITU-T specification.
36 - G.992.5 Annex I All-Digital non-overlapped (F) 48 - G.992.5 Annex I All-Digital non-overlapped (F)
37 - G.992.5 Annex I All-Digital overlapped (F) 49 - G.992.5 Annex I All-Digital overlapped (F)
38 - G.992.5 Annex J All-Digital non-overlapped (F) 50 - G.992.5 Annex J All-Digital non-overlapped (F)
39 - G.992.5 Annex J All-Digital overlapped (F) 51 - G.992.5 Annex J All-Digital overlapped (F)
40 - G.992.5 Annex M POTS non-overlapped (F) 52 - G.992.5 Annex M POTS non-overlapped (F)
41 - G.992.5 Annex M POTS overlapped (F) 53 - G.992.5 Annex M POTS overlapped (F)
42-45 - Unused. Reserved for future ITU-T specification. 54-57 - Unused. Reserved for future ITU-T specification.
46 - G.993.2 Annex A 58 - G.993.2 Annex A
47 - G.993.2 Annex B 59 - G.993.2 Annex B
48 - G.993.2 Annex C 60 - G.993.2 Annex C
" "
SYNTAX INTEGER { SYNTAX INTEGER {
defMode(1), defMode(1),
adsl(2), ansit1413(2),
g9923PotsNonOverlapped(8), etsi(3),
g9923PotsOverlapped(9), g9921PotsNonOverlapped(4),
g9923IsdnNonOverlapped(10), g9921PotsOverlapped(5),
g9923isdnOverlapped(11), g9921IsdnNonOverlapped(6),
g9924potsNonOverlapeed(14), g9921isdnOverlapped(7),
g9924potsOverlapped(15), g9921tcmIsdnNonOverlapped(8),
g9923AnnexIAllDigNonOverlapped(18), g9921tcmIsdnOverlapped(9),
g9923AnnexIAllDigOverlapped(19), g9922potsNonOverlapped(10),
g9923AnnexJAllDigNonOverlapped(20), g9922potsOverlapped(11),
g9923AnnexJAllDigOverlapped(21), g9922tcmIsdnNonOverlapped(12),
g9924AnnexIAllDigNonOverlapped(22), g9922tcmIsdnOverlapped(13),
g9924AnnexIAllDigOverlapped(23), g9921tcmIsdnSymmetric(14),
g9923AnnexLMode1NonOverlapped(24), g9923PotsNonOverlapped(20),
g9923AnnexLMode2NonOverlapped(25), g9923PotsOverlapped(21),
g9923AnnexLMode3Overlapped(26), g9923IsdnNonOverlapped(22),
g9923AnnexLMode4Overlapped(27), g9923isdnOverlapped(23),
g9923AnnexMPotsNonOverlapped(28), g9924potsNonOverlapped(26),
g9923AnnexMPotsOverlapped(29), g9924potsOverlapped(27),
g9925PotsNonOverlapped(30), g9923AnnexIAllDigNonOverlapped(30),
g9925PotsOverlapped(31), g9923AnnexIAllDigOverlapped(31),
g9925IsdnNonOverlapped(32), g9923AnnexJAllDigNonOverlapped(32),
g9925isdnOverlapped(33), g9923AnnexJAllDigOverlapped(33),
g9925AnnexIAllDigNonOverlapped(36), g9924AnnexIAllDigNonOverlapped(34),
g9925AnnexIAllDigOverlapped(37), g9924AnnexIAllDigOverlapped(35),
g9925AnnexJAllDigNonOverlapped(38), g9923AnnexLMode1NonOverlapped(36),
g9925AnnexJAllDigOverlapped(39), g9923AnnexLMode2NonOverlapped(37),
g9925AnnexMPotsNonOverlapped(40), g9923AnnexLMode3Overlapped(38),
g9925AnnexMPotsOverlapped(41), g9923AnnexLMode4Overlapped(39),
g9932AnnexA(46), g9923AnnexMPotsNonOverlapped(40),
g9932AnnexB(47), g9923AnnexMPotsOverlapped(41),
g9932AnnexC(48) g9925PotsNonOverlapped(42),
g9925PotsOverlapped(43),
g9925IsdnNonOverlapped(44),
g9925isdnOverlapped(45),
g9925AnnexIAllDigNonOverlapped(48),
g9925AnnexIAllDigOverlapped(49),
g9925AnnexJAllDigNonOverlapped(50),
g9925AnnexJAllDigOverlapped(51),
g9925AnnexMPotsNonOverlapped(52),
g9925AnnexMPotsOverlapped(53),
g9932AnnexA(58),
g9932AnnexB(59),
g9932AnnexC(60)
} }
Xdsl2PowerMngState ::= TEXTUAL-CONVENTION Xdsl2PowerMngState ::= TEXTUAL-CONVENTION
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Attributes with this syntax uniquely identify each power "Attributes with this syntax uniquely identify each power
management state defined for the VDSL2/ADSL/ADSL2 or ADSL2+ management state defined for the VDSL2/ADSL/ADSL2 or ADSL2+
link. link.
In VDSL2 only L0 and L3 states are defined. In VDSL2 only L0 and L3 states are defined.
The possible values are: The possible values are:
skipping to change at page 45, line 20 skipping to change at page 47, line 5
measure(2) measure(2)
} }
Xdsl2BpscResult ::= TEXTUAL-CONVENTION Xdsl2BpscResult ::= TEXTUAL-CONVENTION
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Possible failure reasons associated with performing "Possible failure reasons associated with performing
a bits per sub-carrier measurement on a DSL line. a bits per sub-carrier measurement on a DSL line.
Possible values are: Possible values are:
none (1) - The default value, in case a measurement was none (1) - The default value, in case a measurement
never requested for the associated line. was never requested for the associated
line.
success (2) - The recent measurement request completed success (2) - The recent measurement request completed
successfully. successfully.
inProgress (3) - The bits per sub-carrier measurement is in inProgress (3) - The bits per sub-carrier measurement is
progress. in progress.
unsupported (4) - The bits per sub-carrier request mechanism unsupported (4) - The bits per sub-carrier request
is not supported. mechanism is not supported.
failed (5) - The measurement request has failed and no failed (5) - The measurement request has failed and no
results are available. results are available.
noResources (6) - The NE cannot initiate the command, due noResources (6) - The NE cannot initiate the command, due
to lack of internal memory resources." to lack of internal memory resources."
SYNTAX INTEGER { SYNTAX INTEGER {
none(1), none(1),
success(2), success(2),
inProgress(3), inProgress(3),
unsupported(4), unsupported(4),
failed(5), failed(5),
skipping to change at page 46, line 31 skipping to change at page 48, line 16
profile30a(7) profile30a(7)
} }
Xdsl2LineClassMask ::= TEXTUAL-CONVENTION Xdsl2LineClassMask ::= TEXTUAL-CONVENTION
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"VDSL2 PSD Mask Class. "VDSL2 PSD Mask Class.
The limit Power Spectral Density masks are grouped in The limit Power Spectral Density masks are grouped in
the following PSD mask classes: the following PSD mask classes:
Class 998 Annex A: D-32, D-64. Class 998 Annex A: D-32, D-48, D-64, D-128.
Class 997-M1c Annex B: 997-M1c-A-7. Class 997-M1c Annex B: 997-M1c-A-7.
Class 997-M1x Annex B: 997-M1x-M-8, 997-M1x-M. Class 997-M1x Annex B: 997-M1x-M-8, 997-M1x-M.
Class 997-M2x Annex B: 997-M2x-M-8, 997-M2x-A, 997-M2x-M. Class 997-M2x Annex B: 997-M2x-M-8, 997-M2x-A, 997-M2x-M,
997E17-M2x-NUS0, 997E30-M2x-NUS0.
Class 998-M1x Annex B: 998-M1x-A, 998-M1x-B, 998-M1x-NUS0. Class 998-M1x Annex B: 998-M1x-A, 998-M1x-B, 998-M1x-NUS0.
Class 998-M2x Annex B: 998-M2x-A, 998-M2x-M, 998-M2x-B, Class 998-M2x Annex B: 998-M2x-A, 998-M2x-M, 998-M2x-B,
998-M2x-NUS0. 998-M2x-NUS0, 998E17-M2x-NUS0,
Class 998 Annex C: POTS (C.2.1.1/G.993.2), 998E17-M2x-NUS0-M, 998E30-M2x-NUS0,
TCM-ISDN (C.2.1.2/G.993.2)." 998E30-M2x-NUS0-M.
Class 998ADE-M2x Annex B: Annex B: 998-M2x-A, 998-M2x-M,
998-M2x-B, 998-M2x-NUS0,
998ADE17-M2x-A, 998ADE17-M2x-B,
998ADE17-M2x-NUS0-M,
998ADE30-M2x-NUS0-A,
998ADE30-M2x-NUS0-M.
Class 998-B Annex C: POTS-138b, POTS-276b per C.2.1.1
in G.993.2, TCM-ISDN per C.2.1.2
in G.993.2.
Class 998-CO Annex C: POTS-138co, POTS-276co per C.2.1.1
in G.993.2.
Class HPE-M1 Annex B: HPE17-M1-NUS0, HPE30-M1-NUS0."
SYNTAX INTEGER { SYNTAX INTEGER {
none(1), none(1),
a998ORb997M1cORc998(2), a998ORb997M1cORc998B(2),
b997M1x(3), b997M1xOR998co(3),
b997M2x(4), b997M2x(4),
b998M1x(5), b998M1x(5),
b998M2x(6) b998M2x(6),
b998AdeM2x(7),
bHpeM1(8)
} }
Xdsl2LineLimitMask ::= TEXTUAL-CONVENTION Xdsl2LineLimitMask ::= TEXTUAL-CONVENTION
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The G.993.2 limit PSD mask for each class of profile. "The G.993.2 limit PSD mask for each class of profile.
The profiles are grouped in following profile classes: The profiles are grouped in following profile classes:
- Class 8: Profiles 8a, 8b, 8c, 8d - Class 8: Profiles 8a, 8b, 8c, 8d
- Class 12: Profiles 12a, 12b - Class 12: Profiles 12a, 12b
- Class 17: Profile 17a - Class 17: Profile 17a
skipping to change at page 50, line 37 skipping to change at page 52, line 37
eu32(0), eu32(0),
eu36(1), eu36(1),
eu40(2), eu40(2),
eu44(3), eu44(3),
eu48(4), eu48(4),
eu52(5), eu52(5),
eu56(6), eu56(6),
eu60(7), eu60(7),
-- --
eu64(8), eu64(8),
reserved1(9), eu128(9),
reserved2(10), reserved1(10),
reserved3(11), reserved2(11),
reserved4(12), reserved3(12),
reserved5(13), reserved4(13),
reserved6(14), reserved5(14),
reserved7(15), reserved6(15),
-- --
adlu32(16), adlu32(16),
adlu36(17), adlu36(17),
adlu40(18), adlu40(18),
adlu44(19), adlu44(19),
adlu48(20), adlu48(20),
adlu52(21), adlu52(21),
adlu56(22), adlu56(22),
adlu60(23), adlu60(23),
-- --
adlu64(24), adlu64(24),
reserved8(25), adlu128(25),
reserved9(26), reserved7(26),
reserved10(27), reserved8(27),
reserved11(28), reserved9(28),
reserved12(29), reserved10(29),
reserved13(30), reserved11(30),
reserved14(31) reserved12(31)
} }
Xdsl2SymbolProtection ::= TEXTUAL-CONVENTION Xdsl2SymbolProtection ::= TEXTUAL-CONVENTION
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" "
This type specifies the minimum impulse noise protection This type specifies the minimum impulse noise protection
for the bearer channel if it is transported over DMT symbols for the bearer channel if it is transported over DMT symbols
with a subcarrier spacing of 4.3125 kHz. with a subcarrier spacing of 4.3125 kHz.
The possible values are: The possible values are:
skipping to change at page 52, line 48 skipping to change at page 54, line 48
eminus3 (1) - Maximum BER=E^-3 eminus3 (1) - Maximum BER=E^-3
eminus5 (2) - Maximum BER=E^-5 eminus5 (2) - Maximum BER=E^-5
eminus7 (3) - Maximum BER=E^-7" eminus7 (3) - Maximum BER=E^-7"
SYNTAX INTEGER { SYNTAX INTEGER {
eminus3(1), eminus3(1),
eminus5(2), eminus5(2),
eminus7(3) eminus7(3)
} }
Xdsl2ChInitPolicy ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"This syntax serves for channel configuration parameters
that reference the channel initialization policy.
The possible values are:
policy0 (1) - Policy 0 according to the applicable standard
policy1 (2) - Policy 1 according to the applicable standard"
SYNTAX INTEGER {
policy0(1),
policy1(2)
}
Xdsl2ScMaskDs ::= TEXTUAL-CONVENTION Xdsl2ScMaskDs ::= TEXTUAL-CONVENTION
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Each one of the 4096 bits in this OCTET "Each one of the 4096 bits in this OCTET
STRING array represents the corresponding bin STRING array represents the corresponding bin
in the downstream direction. A value of one in the downstream direction. A value of one
indicates that the bin is not in use." indicates that the bin is not in use."
SYNTAX OCTET STRING (SIZE(0..512)) SYNTAX OCTET STRING (SIZE(0..512))
Xdsl2ScMaskUs ::= TEXTUAL-CONVENTION Xdsl2ScMaskUs ::= TEXTUAL-CONVENTION
skipping to change at page 54, line 27 skipping to change at page 56, line 39
Xdsl2Tssi ::= TEXTUAL-CONVENTION Xdsl2Tssi ::= TEXTUAL-CONVENTION
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This is a structure that represents up to "This is a structure that represents up to
32 transmit spectrum shaping (TSSi) breakpoints. 32 transmit spectrum shaping (TSSi) breakpoints.
Each breakpoint occupies 3 octets: The first Each breakpoint occupies 3 octets: The first
two octets hold the index of the sub-carrier two octets hold the index of the sub-carrier
associated with the breakpoint. The third octet associated with the breakpoint. The third octet
holds the shaping parameter at the breakpoint. It holds the shaping parameter at the breakpoint. It
is a value from 0 to 127 (units of -0.5dB). The is a value from 0 to 126 (units of -0.5dB). The
special value 127 indicates that the sub-carrier special value 127 indicates that the sub-carrier
is not transmitted." is not transmitted."
SYNTAX OCTET STRING (SIZE(0..96)) SYNTAX OCTET STRING (SIZE(0..96))
------***************************************************** ------*****************************************************
------ The following TC we should add VDSL2 related states ------ The following TC we should add VDSL2 related states
------***************************************************** ------*****************************************************
Xdsl2LastTransmittedState ::= TEXTUAL-CONVENTION Xdsl2LastTransmittedState ::= TEXTUAL-CONVENTION
STATUS current STATUS current
DESCRIPTION DESCRIPTION
skipping to change at page 60, line 36 skipping to change at page 62, line 49
(-140 dBm/Hz) to 200 (-40 dBm/Hz) using units of (-140 dBm/Hz) to 200 (-40 dBm/Hz) using units of
0.5dBm/Hz. 0.5dBm/Hz.
A special value of 255 indicates a noise level A special value of 255 indicates a noise level
of 0 W/Hz." of 0 W/Hz."
SYNTAX OCTET STRING (SIZE(0..48)) SYNTAX OCTET STRING (SIZE(0..48))
Xdsl2LineForceInp ::= TEXTUAL-CONVENTION Xdsl2LineForceInp ::= TEXTUAL-CONVENTION
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" "
This type specifies that the framer settings of the This type is being used for specifing that the framer
bearer shall be selected such that the impulse noise settings of all the bearers of a line in any transmission
protection computed according to the formula specified in direction shall be selected such that the impulse noise
the relevant Recommendation is greater than or equal to the protection computed according to the formula specified
minimal impulse noise protection requirement. in the relevant Recommendation is greater than or equal
This flag shall have the same value for all the bearers of to the minimal impulse noise protection requirement.
one line in the same direction.
forceFramerForInp (0) - Select framer setting to satisfy forceFramerForInp (0) - Select framer setting to satisfy
impulse noise protection requirements." impulse noise protection requirements."
SYNTAX BITS { SYNTAX BITS {
forceFramerForInp(0) forceFramerForInp(0)
} }
Xdsl2BitsAlloc ::= TEXTUAL-CONVENTION Xdsl2BitsAlloc ::= TEXTUAL-CONVENTION
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" "
This type specifies a array of nibbles, where each nibble This type specifies a array of nibbles, where each nibble
indicates the bits allocation for a sub-carrier. indicates the bits allocation for a sub-carrier.
Each nibble has a value in the range 0 to 15 to indicate Each nibble has a value in the range 0 to 15 to indicate
the bits allocation." the bits allocation."
SYNTAX OCTET STRING (SIZE(0..256)) SYNTAX OCTET STRING (SIZE(0..256))
Xdsl2MrefPsdDs ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"
Attributes with this syntax are
MEDLEY Reference PSD status parameters on
downstream direction. It is expressed as
the set of breakpoints exchanged at
initialization.
The OCTET STRING contains up to 48 pairs
of values in the following structure:
Octets 0&1 -- Index of 1st subcarrier used
in the context of a first breakpoint.
Octets 2&3 -- The PSD level for the
subcarrier indicated in octets 0&1.
Octets 4-7 -- Same, for a 2nd breakpoint
Octets 8-11 -- Same, for a 3rd breakpoint
And so on until
Octets 188-191 -- Same, for a 48th breakpoint.
Each subcarrier index is an unsigned number
in the range 1 and NSds (i.e., highest
supported sub carrier index on downstream
direction).
The PSD level is an integer value in the 0 to
4095 range. It is represented in units of 0.1
dB offset from -140dBm/Hz."
SYNTAX OCTET STRING (SIZE(0..192))
Xdsl2MrefPsdUs ::= TEXTUAL-CONVENTION
STATUS current
DESCRIPTION
"
Attributes with this syntax are
MEDLEY Reference PSD status parameters on
upstream direction. It is expressed as
the set of breakpoints exchanged at
initialization.
The OCTET STRING contains up to 32 pairs
of values in the following structure:
Octets 0&1 -- Index of 1st subcarrier used
in the context of a first breakpoint.
Octets 2&3 -- The PSD level for the
subcarrier indicated in octets 0&1.
Octets 4-7 -- Same, for a 2nd breakpoint
Octets 8-11 -- Same, for a 3rd breakpoint
And so on until
Octets 124-127 -- Same, for a 32nd breakpoint.
Each subcarrier index is an unsigned number
in the range 1 and NSus (i.e., highest
supported sub carrier index on upstream
direction).
The PSD level is an integer value in the 0 to
4095 range. It is represented in units of 0.1
dB offset from -140dBm/Hz."
SYNTAX OCTET STRING (SIZE(0..128))
END END
VDSL2-LINE-MIB DEFINITIONS ::= BEGIN VDSL2-LINE-MIB DEFINITIONS ::= BEGIN
IMPORTS IMPORTS
MODULE-IDENTITY, MODULE-IDENTITY,
OBJECT-TYPE, OBJECT-TYPE,
transmission, transmission,
Unsigned32, Unsigned32,
NOTIFICATION-TYPE, NOTIFICATION-TYPE,
skipping to change at page 62, line 12 skipping to change at page 65, line 32
Xdsl2ConfPmsForce, Xdsl2ConfPmsForce,
Xdsl2LinePmMode, Xdsl2LinePmMode,
Xdsl2LineLdsf, Xdsl2LineLdsf,
Xdsl2LdsfResult, Xdsl2LdsfResult,
Xdsl2LineBpsc, Xdsl2LineBpsc,
Xdsl2BpscResult, Xdsl2BpscResult,
Xdsl2LineReset, Xdsl2LineReset,
Xdsl2SymbolProtection, Xdsl2SymbolProtection,
Xdsl2SymbolProtection8, Xdsl2SymbolProtection8,
Xdsl2MaxBer, Xdsl2MaxBer,
Xdsl2ChInitPolicy,
Xdsl2ScMaskDs, Xdsl2ScMaskDs,
Xdsl2ScMaskUs, Xdsl2ScMaskUs,
Xdsl2CarMask, Xdsl2CarMask,
Xdsl2RfiBands, Xdsl2RfiBands,
Xdsl2PsdMaskDs, Xdsl2PsdMaskDs,
Xdsl2PsdMaskUs, Xdsl2PsdMaskUs,
Xdsl2Tssi, Xdsl2Tssi,
Xdsl2LastTransmittedState, Xdsl2LastTransmittedState,
Xdsl2LineStatus, Xdsl2LineStatus,
Xdsl2ChInpReport, Xdsl2ChInpReport,
skipping to change at page 62, line 37 skipping to change at page 66, line 10
Xdsl2LineUs0Mask, Xdsl2LineUs0Mask,
Xdsl2LineClassMask, Xdsl2LineClassMask,
Xdsl2LineLimitMask, Xdsl2LineLimitMask,
Xdsl2LineUs0Disable, Xdsl2LineUs0Disable,
Xdsl2LinePsdMaskSelectUs, Xdsl2LinePsdMaskSelectUs,
Xdsl2LineCeFlag, Xdsl2LineCeFlag,
Xdsl2LineSnrMode, Xdsl2LineSnrMode,
Xdsl2LineTxRefVnDs, Xdsl2LineTxRefVnDs,
Xdsl2LineTxRefVnUs, Xdsl2LineTxRefVnUs,
Xdsl2LineForceInp, Xdsl2LineForceInp,
Xdsl2BitsAlloc Xdsl2BitsAlloc,
Xdsl2MrefPsdDs,
Xdsl2MrefPsdUs
FROM VDSL2-LINE-TC-MIB -- [This document] FROM VDSL2-LINE-TC-MIB -- [This document]
MODULE-COMPLIANCE, MODULE-COMPLIANCE,
OBJECT-GROUP, OBJECT-GROUP,
NOTIFICATION-GROUP NOTIFICATION-GROUP
FROM SNMPv2-CONF; FROM SNMPv2-CONF;
vdsl2MIB MODULE-IDENTITY vdsl2MIB MODULE-IDENTITY
LAST-UPDATED "200710070000Z" -- October 7, 2007 LAST-UPDATED "200801290000Z" -- January 29, 2008
ORGANIZATION "ADSLMIB Working Group" ORGANIZATION "ADSLMIB Working Group"
CONTACT-INFO "WG-email: adslmib@ietf.org CONTACT-INFO "WG-email: adslmib@ietf.org
Info: https://www1.ietf.org/mailman/listinfo/adslmib Info: https://www1.ietf.org/mailman/listinfo/adslmib
Chair: Mike Sneed Chair: Mike Sneed
Sand Channel Systems Sand Channel Systems
Postal: P.O. Box 37324 Postal: P.O. Box 37324
Raleigh NC 27627-732 Raleigh NC 27627-732
Email: sneedmike@hotmail.com Email: sneedmike@hotmail.com
Phone: +1 206 600 7022 Phone: +1 206 600 7022
Co-Chair: Menachem Dodge Co-Chair: Menachem Dodge
ECI Telecom Ltd. ECI Telecom Ltd.
Postal: 30 Hasivim St. Postal: 30 Hasivim St.
skipping to change at page 64, line 29 skipping to change at page 68, line 5
management model that manages VDSL2 interfaces per G.993.2 management model that manages VDSL2 interfaces per G.993.2
[G.993.2] as well as ADSL, ADSL2 and ADSL2+ technologies [G.993.2] as well as ADSL, ADSL2 and ADSL2+ technologies
per T1E1.413, G.992.1, G.992.2, G.992.3, G.992.4, and per T1E1.413, G.992.1, G.992.2, G.992.3, G.992.4, and
G.992.5 G.992.5
([T1E1.413], [G.992.1], [G.992.2], [G.992.3], [G.992.4], and ([T1E1.413], [G.992.1], [G.992.2], [G.992.3], [G.992.4], and
[G.992.5] respectively). [G.992.5] respectively).
Additionally, the management framework for VDSL2 lines Additionally, the management framework for VDSL2 lines
specified by the Digital Subscriber Line Forum specified by the Digital Subscriber Line Forum
(DSLF) has been taken into consideration [TR-129]. That (DSLF) has been taken into consideration [TR-129]. That
framework is based on ITU-T G.997.1 standard [G.997.1]. framework is based on ITU-T G.997.1 standard [G.997.1] and
its amendment 1 [G.997.1-Am1].
The MIB module is located in the MIB tree under MIB 2 The MIB module is located in the MIB tree under MIB 2
transmission, as discussed in the MIB-2 Integration (RFC 2863 transmission, as discussed in the MIB-2 Integration (RFC 2863
[RFC2863]) section of this document. [RFC2863]) section of this document.
Copyright (C) The Internet Society (2007). This version of Copyright (C) The IETF Trust (2008). This version of
this MIB module is part of RFC XXXX: see the RFC itself for this MIB module is part of RFC XXXX: see the RFC itself for
full legal notices." full legal notices."
-- RFC Ed.: replace XXXX with assigned number & remove this note -- RFC Ed.: replace XXXX with assigned number & remove this note
REVISION "200710070000Z" -- October 7, 2007 REVISION "200801290000Z" -- January 29, 2008
DESCRIPTION "Initial version, published as RFC XXXX." DESCRIPTION "Initial version, published as RFC XXXX."
-- RFC Ed.: replace XXXX with assigned number & remove this note -- RFC Ed.: replace XXXX with assigned number & remove this note
::= { transmission xxx } ::= { transmission xxx }
-- IANA, we suggest to put it under { transmission xxx } because -- IANA, we suggest to put it under { transmission xxx } because
-- this is the first available number. -- this is the first available number.
-- RFC Ed.: Please fill in xxx once assigned by IANA. -- RFC Ed.: Please fill in xxx once assigned by IANA.
vdsl2 OBJECT IDENTIFIER ::= { vdsl2MIB 1 } vdsl2 OBJECT IDENTIFIER ::= { vdsl2MIB 1 }
------------------------------------------------ ------------------------------------------------
xdsl2Line OBJECT IDENTIFIER ::= { vdsl2 1 } xdsl2Line OBJECT IDENTIFIER ::= { vdsl2 1 }
skipping to change at page 65, line 22 skipping to change at page 68, line 46
xdsl2PMLine OBJECT IDENTIFIER ::= { xdsl2PM 1 } xdsl2PMLine OBJECT IDENTIFIER ::= { xdsl2PM 1 }
xdsl2PMChannel OBJECT IDENTIFIER ::= { xdsl2PM 2 } xdsl2PMChannel OBJECT IDENTIFIER ::= { xdsl2PM 2 }
------------------------------------------------ ------------------------------------------------
xdsl2ProfileLine OBJECT IDENTIFIER ::= { xdsl2Profile 1 } xdsl2ProfileLine OBJECT IDENTIFIER ::= { xdsl2Profile 1 }
xdsl2ProfileChannel OBJECT IDENTIFIER ::= { xdsl2Profile 2 } xdsl2ProfileChannel OBJECT IDENTIFIER ::= { xdsl2Profile 2 }
xdsl2ProfileAlarmConf OBJECT IDENTIFIER ::= { xdsl2Profile 3 } xdsl2ProfileAlarmConf OBJECT IDENTIFIER ::= { xdsl2Profile 3 }
------------------------------------------------ ------------------------------------------------
xdsl2ScalarSC OBJECT IDENTIFIER ::= { xdsl2Scalar 1 } xdsl2ScalarSC OBJECT IDENTIFIER ::= { xdsl2Scalar 1 }
------------------------------------------------ ------------------------------------------------
------------------------------------------------ ------------------------------------------------
-- xdsl2LineTable -- -- xdsl2LineTable --
------------------------------------------------ ------------------------------------------------
xdsl2LineTable OBJECT-TYPE xdsl2LineTable OBJECT-TYPE
SYNTAX SEQUENCE OF Xdsl2LineEntry SYNTAX SEQUENCE OF Xdsl2LineEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table xdsl2LineTable contains configuration, "The table xdsl2LineTable contains configuration,
command and status parameters of the VDSL2/ADSL/ADSL2 command and status parameters of the VDSL2/ADSL/ADSL2
skipping to change at page 66, line 10 skipping to change at page 69, line 31
DESCRIPTION DESCRIPTION
"The table xdsl2LineTable contains configuration, "The table xdsl2LineTable contains configuration,
commands and status parameters of the VDSL2/ADSL/ADSL2 commands and status parameters of the VDSL2/ADSL/ADSL2
or ADSL2+ line." or ADSL2+ line."
INDEX { ifIndex } INDEX { ifIndex }
::= { xdsl2LineTable 1 } ::= { xdsl2LineTable 1 }
Xdsl2LineEntry ::= Xdsl2LineEntry ::=
SEQUENCE { SEQUENCE {
xdsl2LineCnfgTemplate SnmpAdminString, xdsl2LineCnfgTemplate SnmpAdminString,
xdsl2LineCnfgFallbackTemplate SnmpAdminString,
xdsl2LineAlarmCnfgTemplate SnmpAdminString, xdsl2LineAlarmCnfgTemplate SnmpAdminString,
xdsl2LineCmndConfPmsf Xdsl2ConfPmsForce, xdsl2LineCmndConfPmsf Xdsl2ConfPmsForce,
xdsl2LineCmndConfLdsf Xdsl2LineLdsf, xdsl2LineCmndConfLdsf Xdsl2LineLdsf,
xdsl2LineCmndConfLdsfFailReason Xdsl2LdsfResult, xdsl2LineCmndConfLdsfFailReason Xdsl2LdsfResult,
xdsl2LineCmndConfBpsc Xdsl2LineBpsc, xdsl2LineCmndConfBpsc Xdsl2LineBpsc,
xdsl2LineCmndConfBpscFailReason Xdsl2BpscResult, xdsl2LineCmndConfBpscFailReason Xdsl2BpscResult,
xdsl2LineCmndConfBpscReqCount Unsigned32, xdsl2LineCmndConfBpscReqCount Unsigned32,
xdsl2LineCmndAutomodeColdStart TruthValue, xdsl2LineCmndAutomodeColdStart TruthValue,
xdsl2LineCmndConfReset Xdsl2LineReset, xdsl2LineCmndConfReset Xdsl2LineReset,
xdsl2LineStatusActTemplate SnmpAdminString,
xdsl2LineStatusXtuTransSys Xdsl2TransmissionModeType, xdsl2LineStatusXtuTransSys Xdsl2TransmissionModeType,
xdsl2LineStatusPwrMngState Xdsl2PowerMngState, xdsl2LineStatusPwrMngState Xdsl2PowerMngState,
xdsl2LineStatusInitResult Xdsl2InitResult, xdsl2LineStatusInitResult Xdsl2InitResult,
xdsl2LineStatusLastStateDs Xdsl2LastTransmittedState, xdsl2LineStatusLastStateDs Xdsl2LastTransmittedState,
xdsl2LineStatusLastStateUs Xdsl2LastTransmittedState, xdsl2LineStatusLastStateUs Xdsl2LastTransmittedState,
xdsl2LineStatusXtur Xdsl2LineStatus, xdsl2LineStatusXtur Xdsl2LineStatus,
xdsl2LineStatusXtuc Xdsl2LineStatus, xdsl2LineStatusXtuc Xdsl2LineStatus,
xdsl2LineStatusAttainableRateDs Unsigned32, xdsl2LineStatusAttainableRateDs Unsigned32,
xdsl2LineStatusAttainableRateUs Unsigned32, xdsl2LineStatusAttainableRateUs Unsigned32,
xdsl2LineStatusActPsdDs Integer32, xdsl2LineStatusActPsdDs Integer32,
xdsl2LineStatusActPsdUs Integer32, xdsl2LineStatusActPsdUs Integer32,
xdsl2LineStatusActAtpDs Integer32, xdsl2LineStatusActAtpDs Integer32,
xdsl2LineStatusActAtpUs Integer32, xdsl2LineStatusActAtpUs Integer32,
xdsl2LineStatusActProfile Xdsl2LineProfiles, xdsl2LineStatusActProfile Xdsl2LineProfiles,
xdsl2LineStatusActLimitMask Xdsl2LineLimitMask, xdsl2LineStatusActLimitMask Xdsl2LineLimitMask,
xdsl2LineStatusActUs0Mask Xdsl2LineUs0Mask, xdsl2LineStatusActUs0Mask Xdsl2LineUs0Mask,
xdsl2LineStatusActSnrModeDs Xdsl2LineSnrMode, xdsl2LineStatusActSnrModeDs Xdsl2LineSnrMode,
xdsl2LineStatusActSnrModeUs Xdsl2LineSnrMode, xdsl2LineStatusActSnrModeUs Xdsl2LineSnrMode,
xdsl2LineStatusElectricalLength Unsigned32, xdsl2LineStatusElectricalLength Unsigned32,
xdsl2LineStatusTssiDs Xdsl2Tssi,
xdsl2LineStatusTssiUs Xdsl2Tssi,
xdsl2LineStatusMrefPsdDs Xdsl2MrefPsdDs,
xdsl2LineStatusMrefPsdUs Xdsl2MrefPsdUs,
xdsl2LineStatusTrellisDs TruthValue, xdsl2LineStatusTrellisDs TruthValue,
xdsl2LineStatusTrellisUs TruthValue, xdsl2LineStatusTrellisUs TruthValue,
xdsl2LineStatusActualCe Unsigned32 xdsl2LineStatusActualCe Unsigned32
} }
xdsl2LineCnfgTemplate OBJECT-TYPE xdsl2LineCnfgTemplate OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32)) SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The value of this object identifies the row in the xDSL2 "The value of this object identifies the row in the xDSL2
Line Line
Configuration Templates Table, (xdsl2LineConfTemplateTable), Configuration Templates Table, (xdsl2LineConfTemplateTable),
which applies for this line. which applies for this line.
This object MUST be maintained in a persistent manner." This object MUST be maintained in a persistent manner."
REFERENCE "DSL Forum TR-129, paragraph #5.1" REFERENCE "DSL Forum TR-129, paragraph #5.1"
DEFVAL { "DEFVAL" } DEFVAL { "DEFVAL" }
::= { xdsl2LineEntry 1 } ::= { xdsl2LineEntry 1 }
xdsl2LineCnfgFallbackTemplate OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..32))
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"This object is used to identify the template that
will be used if the xDSL2 line fails to operate
using the primary template. The primary template is
identified using the xdsl2LineCnfgTemplate attribute.
For example, a xDSL2 line may fallback to a template
with a lower rate if the rate specified in the primary
template cannot be achieved.
The value of this object identifies a row in the xDSL2
Line Configuration Template Table,
xdsl2LineConfTemplateTable.
Any row in the xdsl2LineConfTemplateTable table may be
used as a fallback template.
If the xDSL2 line fails to operate using the fallback
template then the primary template should be retried.
The xTU-C should continue to alternate between the
primary and fallback templates until one of them
succeeds.
If the value of this object is a zero length string then
no fallback template is defined and only the primary
template will be used.
Note that implementation of this object is not mandatory.
If this object is not supported, any attempt to modify this
object should result in the SET request being rejected.
This object MUST be maintained in a persistent manner."
::= { xdsl2LineEntry 2 }
xdsl2LineAlarmCnfgTemplate OBJECT-TYPE xdsl2LineAlarmCnfgTemplate OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32)) SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The value of this object identifies the row in the xDSL2 "The value of this object identifies the row in the xDSL2
Line Line
Alarm Configuration Template Table, Alarm Configuration Template Table,
(xdsl2LineAlarmConfTemplateTable), which applies to this line. (xdsl2LineAlarmConfTemplateTable), which applies to this line.
This object MUST be maintained in a persistent manner." This object MUST be maintained in a persistent manner."
REFERENCE "DSL Forum TR-129, paragraph #5.1" REFERENCE "DSL Forum TR-129, paragraph #5.1"
DEFVAL { "DEFVAL" } DEFVAL { "DEFVAL" }
::= { xdsl2LineEntry 2 } ::= { xdsl2LineEntry 3 }
xdsl2LineCmndConfPmsf OBJECT-TYPE xdsl2LineCmndConfPmsf OBJECT-TYPE
SYNTAX Xdsl2ConfPmsForce SYNTAX Xdsl2ConfPmsForce
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Power management state forced (PMSF). Defines the line "Power management state forced (PMSF). Defines the line
states to be forced by the near-end xTU on this line. states to be forced by the near-end xTU on this line.
The various possible values are: The various possible values are:
l3toL0 (0), l3toL0 (0),
l0toL2 (2), l0toL2 (2),
l0orL2toL3 (3). l0orL2toL3 (3).
This object MUST be maintained in a persistent manner." This object MUST be maintained in a persistent manner."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.1.3" REFERENCE "ITU-T G.997.1, paragraph #7.3.1.1.3"
DEFVAL { l3toL0 } DEFVAL { l3toL0 }
::= { xdsl2LineEntry 3 } ::= { xdsl2LineEntry 4 }
xdsl2LineCmndConfLdsf OBJECT-TYPE xdsl2LineCmndConfLdsf OBJECT-TYPE
SYNTAX Xdsl2LineLdsf SYNTAX Xdsl2LineLdsf
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Loop diagnostics mode forced (LDSF). "Loop diagnostics mode forced (LDSF).
Defines whether the line should be forced into the loop Defines whether the line should be forced into the loop
diagnostics mode by the near-end xTU of this line. Note that diagnostics mode by the near-end xTU of this line. Note that
a loop diagnostics may be initiated by the far-end xTU at a loop diagnostics may be initiated by the far-end xTU at
any time. any time.
Only when the xdsl2LineStatusPwrMngState attribute is in Only when the xdsl2LineStatusPwrMngState attribute is in
the l3(4) state and the xdsl2LineCmndConfPmsf attribute the l3(4) state and the xdsl2LineCmndConfPmsf attribute
is in the l0orL2toL3(3) state, can the line be forced into is in the l0orL2toL3(3) state, can the line be forced into
the loop diagnostic mode procedures. Upon successful completion loop diagnostic mode procedures. Upon successful completion
of the loop diagnostic mode procedures, the Access Node shall of the loop diagnostic mode procedures, the Access Node shall
set this attribute to inhibit(0), and xdsl2LineStatusPwrMngState set this attribute to inhibit(0), and
will remain in the l3(4) state. The loop diagnostic data xdsl2LineStatusPwrMngState will remain in the l3(4) state. The
shall be available at least until xdsl2LineCmndConfPmsf loop diagnostic data shall be available at least until
is set to the l3toL0(0) state. xdsl2LineCmndConfPmsf is set to the l3toL0(0) state.
The results of the loop diagnostic procedure are stored The results of the loop diagnostic procedure are stored
in the tables xdsl2SCStatusTable, xdsl2SCStatusBandTable in the tables xdsl2SCStatusTable, xdsl2SCStatusBandTable
and xdsl2SCStatusSegmentTable. The status of the loop and xdsl2SCStatusSegmentTable. The status of the loop
diagnostic procedue is indicated by diagnostic procedue is indicated by
xdsl2LineCmndConfLdsfFailReason. xdsl2LineCmndConfLdsfFailReason.
As long as loop diagnostic procedures are not completed As long as loop diagnostic procedures are not completed
successfully, attempts shall be made to do so, until the loop successfully, attempts shall be made to do so, until the loop
diagnostic mode is no longer forced on the line through this diagnostic mode is no longer forced on the line through this
configuration parameter." configuration parameter."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.1.8" REFERENCE "ITU-T G.997.1, paragraph #7.3.1.1.8"
DEFVAL { inhibit } DEFVAL { inhibit }
::= { xdsl2LineEntry 4 } ::= { xdsl2LineEntry 5 }
xdsl2LineCmndConfLdsfFailReason OBJECT-TYPE xdsl2LineCmndConfLdsfFailReason OBJECT-TYPE
SYNTAX Xdsl2LdsfResult SYNTAX Xdsl2LdsfResult
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The status of the recent occasion the Loop diagnostics mode "The status of the recent occasion the Loop diagnostics mode
forced (LDSF) was issued for the associated line. Possible forced (LDSF) was issued for the associated line. Possible
values are: values are:
none (1) - The default value in case LDSF was never none (1) - The default value in case LDSF was never
requested for the associated line. requested for the associated line.
success (2) - The recent command completed success (2) - The recent command completed
successfully. successfully.
inProgress (3) - The Loop Diagnostics process is in inProgress (3) - The Loop Diagnostics process is in
progress. progress.
unsupported (4) - The NE or the line card doesn't support unsupported (4) - The NE or the line card doesn't support
LDSF. LDSF.
cannotRun (5) - The NE cannot initiate the command, due cannotRun (5) - The NE cannot initiate the command, due
to a non specific reason. to a non specific reason.
skipping to change at page 69, line 12 skipping to change at page 73, line 29
line. line.
adminUp (9) - The NE cannot initiate the command, as adminUp (9) - The NE cannot initiate the command, as
the relevant line is administratively the relevant line is administratively
'Up'. 'Up'.
tableFull (10)- The NE cannot initiate the command, due tableFull (10)- The NE cannot initiate the command, due
to reaching the maximum number of rows to reaching the maximum number of rows
in the results table. in the results table.
noResources (11)- The NE cannot initiate the command, due noResources (11)- The NE cannot initiate the command, due
to lack of internal memory resources." to lack of internal memory resources."
DEFVAL { none } DEFVAL { none }
::= { xdsl2LineEntry 5 } ::= { xdsl2LineEntry 6 }
xdsl2LineCmndConfBpsc OBJECT-TYPE xdsl2LineCmndConfBpsc OBJECT-TYPE
SYNTAX Xdsl2LineBpsc SYNTAX Xdsl2LineBpsc
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Request a bits per sub-carrier measurement to be made. "Request a bits per sub-carrier measurement to be made.
A request for a bits per sub-carrier measurement is made A request for a bits per sub-carrier measurement is made
by setting this attribute to the value of measure(2). by setting this attribute to the value of measure(2).
skipping to change at page 69, line 44 skipping to change at page 74, line 13
due to rate adaption and bit swapping. due to rate adaption and bit swapping.
The implementation of this additional mechanism for The implementation of this additional mechanism for
measuring bits per sub-carrier is not mandatory. measuring bits per sub-carrier is not mandatory.
The results of the bits per sub-carrier measurement are The results of the bits per sub-carrier measurement are
stored in xdsl2LineSegmentTable. The status of the bits stored in xdsl2LineSegmentTable. The status of the bits
per sub-carrier measurement is indicated by per sub-carrier measurement is indicated by
xdsl2LineCmndConfBpscFailReason." xdsl2LineCmndConfBpscFailReason."
DEFVAL { idle } DEFVAL { idle }
::= { xdsl2LineEntry 6 } ::= { xdsl2LineEntry 7 }
xdsl2LineCmndConfBpscFailReason OBJECT-TYPE xdsl2LineCmndConfBpscFailReason OBJECT-TYPE
SYNTAX Xdsl2BpscResult SYNTAX Xdsl2BpscResult
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The status of the most recent bits per sub-carrier "The status of the most recent bits per sub-carrier
measurement request issued for the associated line. measurement request issued for the associated line.
Possible values are: Possible values are:
none (1) - The default value, in case a measurement none (1) - The default value, in case a measurement
was never requested for the associated line. was never requested for the associated
line.
success (2) - The recent measurement request completed success (2) - The recent measurement request completed
successfully. successfully.
inProgress (3) - The bits per sub-carrier measurement is in inProgress (3) - The bits per sub-carrier measurement is
progress. in progress.
unsupported (4) - The bits per sub-carrier request mechanism unsupported (4) - The bits per sub-carrier request
is not supported. mechanism is not supported.
failed (5) - The measurement request has failed and no failed (5) - The measurement request has failed and no
results are available. results are available.
noResources (6) - The NE cannot initiate the command, due noResources (6) - The NE cannot initiate the command, due
to lack of internal memory resources." to lack of internal memory resources."
DEFVAL { none } DEFVAL { none }
::= { xdsl2LineEntry 7 } ::= { xdsl2LineEntry 8 }
xdsl2LineCmndConfBpscReqCount OBJECT-TYPE xdsl2LineCmndConfBpscReqCount OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Measurement request counter. "Measurement request counter.
This counter is incremented by one every time a request This counter is incremented by one every time a request
for a measurement is made. A measurement request is made for a measurement is made. A measurement request is made
by setting the xdsl2LineCmndConfBpsc attribute to the by setting the xdsl2LineCmndConfBpsc attribute to the
value measure(2). value measure(2).
SNMP managers can use this attribute to check that the SNMP managers can use this attribute to check that the
measurement results retrieved by the manager where not measurement results retrieved by the manager where not
interupted by another measurement request." interupted by another measurement request."
DEFVAL { 0 } DEFVAL { 0 }
::= { xdsl2LineEntry 8 } ::= { xdsl2LineEntry 9 }
xdsl2LineCmndAutomodeColdStart OBJECT-TYPE xdsl2LineCmndAutomodeColdStart OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Automode cold start forced. This parameter is defined "Automode cold start forced. This parameter is defined
in order to improve testing of the performance of xTUs in order to improve testing of the performance of xTUs
supporting automode when it is enabled in the MIB. supporting automode when it is enabled in the MIB.
Change the value of this parameter to 'true' indicates Change the value of this parameter to 'true' indicates
skipping to change at page 71, line 15 skipping to change at page 75, line 31
Automode is the case where multiple operation-modes are Automode is the case where multiple operation-modes are
enabled through the xdsl2LConfProfXtuTransSysEna object enabled through the xdsl2LConfProfXtuTransSysEna object
in the line configuration profile being used for the in the line configuration profile being used for the
line, and where the selection of the actual line, and where the selection of the actual
operation-mode depends not only on the common operation-mode depends not only on the common
capabilities of both xTUs (as exchanged in G.994.1), but capabilities of both xTUs (as exchanged in G.994.1), but
also on achievable data rates under given loop also on achievable data rates under given loop
conditions." conditions."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.1.10" REFERENCE "ITU-T G.997.1, paragraph #7.3.1.1.10"
DEFVAL { false } DEFVAL { false }
::= { xdsl2LineEntry 9 } ::= { xdsl2LineEntry 10 }
xdsl2LineCmndConfReset OBJECT-TYPE xdsl2LineCmndConfReset OBJECT-TYPE
SYNTAX Xdsl2LineReset SYNTAX Xdsl2LineReset
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Request a line reset to occur. "Request a line reset to occur.
If this attribute is set to the value of reset(2), then If this attribute is set to the value of reset(2), then
force the line to reset ( i.e. the modems will retrain ). force the line to reset ( i.e. the modems will retrain ).
When the line has successfully reset, the SNMP agent will When the line has successfully reset, the SNMP agent will
set the value of this attribute to idle(1). set the value of this attribute to idle(1).
Note that the xdsl2LineCmndConfPmsf attribute will always Note that the xdsl2LineCmndConfPmsf attribute will always
take precedence over this attribute. take precedence over this attribute.
If the xdsl2LineCmndConfPmsf attribute is set to the value If the xdsl2LineCmndConfPmsf attribute is set to the value
l0orL2toL3(3), then the line must not return to the l0orL2toL3(3), then the line must not return to the
showtime state due to a reset request action performed showtime state due to a reset request action performed
using this attribute." using this attribute."
DEFVAL { idle } DEFVAL { idle }
::= { xdsl2LineEntry 10 } ::= { xdsl2LineEntry 11 }
xdsl2LineStatusActTemplate OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..32))
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object is used to identify the template that
is currently in use for this line.
This attribute is updated when a successfull line
initialisation occurs.
This attribute indicates if the primary template
( xdsl2LineCnfgTemplate ) is in use or the
fallback template ( xdsl2LineCnfgFallbackTemplate )
is in use.
If the line is not successfully initialised then
the value of this object will be a zero length string."
::= { xdsl2LineEntry 12 }
xdsl2LineStatusXtuTransSys OBJECT-TYPE xdsl2LineStatusXtuTransSys OBJECT-TYPE
SYNTAX Xdsl2TransmissionModeType SYNTAX Xdsl2TransmissionModeType
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The xTU Transmission System (xTS) in use. "The xTU Transmission System (xTS) in use.
It is coded in a bit-map representation with one bit set to It is coded in a bit-map representation with one bit set to
'1' (the selected coding for the DSL line). This '1' (the selected coding for the DSL line). This
parameter parameter
may be derived from the handshaking procedures defined in may be derived from the handshaking procedures defined in
Recommendation G.994.1. A set of xDSL line transmission Recommendation G.994.1. A set of xDSL line transmission
modes, with one bit per mode. " modes, with one bit per mode. "
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.1" REFERENCE "ITU-T G.997.1, paragraph #7.5.1.1"
DEFVAL { {} } DEFVAL { {} }
::= { xdsl2LineEntry 11 } ::= { xdsl2LineEntry 13 }
xdsl2LineStatusPwrMngState OBJECT-TYPE xdsl2LineStatusPwrMngState OBJECT-TYPE
SYNTAX Xdsl2PowerMngState SYNTAX Xdsl2PowerMngState
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The current power management state. One of four possible "The current power management state. One of four possible
power management states: power management states:
L0 - Synchronized and full transmission (i.e., Showtime), L0 - Synchronized and full transmission (i.e., Showtime),
L1 - Low Power with reduced net data rate (G.992.2 only), L1 - Low Power with reduced net data rate (G.992.2 only),
L2 - Low Power with reduced net data rate (G.992.3 and L2 - Low Power with reduced net data rate (G.992.3 and
G.992.4 only), G.992.4 only),
L3 - No power L3 - No power
The various possible values are:l0(1), l1(2), l2(3), l3(4)." The various possible values are:l0(1), l1(2), l2(3), l3(4)."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.5" REFERENCE "ITU-T G.997.1, paragraph #7.5.1.5"
DEFVAL { l3 } DEFVAL { l3 }
::= { xdsl2LineEntry 12 } ::= { xdsl2LineEntry 14 }
xdsl2LineStatusInitResult OBJECT-TYPE xdsl2LineStatusInitResult OBJECT-TYPE
SYNTAX Xdsl2InitResult SYNTAX Xdsl2InitResult
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates the result of the last full initialization "Indicates the result of the last full initialization
performed performed
on the line. It is an enumeration type with the following on the line. It is an enumeration type with the following
values: noFail(0), configError(1), configNotFeasible(2), values: noFail(0), configError(1), configNotFeasible(2),
commFail(3), noPeerAtu(4), otherCause(5)." commFail(3), noPeerAtu(4), otherCause(5)."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.6" REFERENCE "ITU-T G.997.1, paragraph #7.5.1.6"
DEFVAL { noFail } DEFVAL { noFail }
::= { xdsl2LineEntry 13 } ::= { xdsl2LineEntry 15 }
xdsl2LineStatusLastStateDs OBJECT-TYPE xdsl2LineStatusLastStateDs OBJECT-TYPE
SYNTAX Xdsl2LastTransmittedState SYNTAX Xdsl2LastTransmittedState
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The last successful transmitted initialization state in "The last successful transmitted initialization state in
the downstream direction in the last full initialization the downstream direction in the last full initialization
performed on the line." performed on the line."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.7" REFERENCE "ITU-T G.997.1, paragraph #7.5.1.7"
DEFVAL { atucG9941 } DEFVAL { atucG9941 }
::= { xdsl2LineEntry 14 } ::= { xdsl2LineEntry 16 }
xdsl2LineStatusLastStateUs OBJECT-TYPE xdsl2LineStatusLastStateUs OBJECT-TYPE
SYNTAX Xdsl2LastTransmittedState SYNTAX Xdsl2LastTransmittedState
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The last successful transmitted initialization state in the "The last successful transmitted initialization state in the
upstream direction in the last full initialization performed upstream direction in the last full initialization performed
on the line." on the line."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.8" REFERENCE "ITU-T G.997.1, paragraph #7.5.1.8"
DEFVAL { aturG9941 } DEFVAL { aturG9941 }
::= { xdsl2LineEntry 15 } ::= { xdsl2LineEntry 17 }
xdsl2LineStatusXtur OBJECT-TYPE xdsl2LineStatusXtur OBJECT-TYPE
SYNTAX Xdsl2LineStatus SYNTAX Xdsl2LineStatus
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates current state (existing failures) of the xTU-R. "Indicates current state (existing failures) of the xTU-R.
This is a bit-map of possible conditions. " This is a bit-map of possible conditions. "
REFERENCE "ITU-T G.997.1, paragraph #7.1.1.2" REFERENCE "ITU-T G.997.1, paragraph #7.1.1.2"
DEFVAL { { noDefect } } DEFVAL { { noDefect } }
::= { xdsl2LineEntry 16 } ::= { xdsl2LineEntry 18 }
xdsl2LineStatusXtuc OBJECT-TYPE xdsl2LineStatusXtuc OBJECT-TYPE
SYNTAX Xdsl2LineStatus SYNTAX Xdsl2LineStatus
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates current state (existing failures) of the xTU-C. "Indicates current state (existing failures) of the xTU-C.
This is a bit-map of possible conditions. " This is a bit-map of possible conditions. "
REFERENCE "ITU-T G.997.1, paragraph #7.1.1.1" REFERENCE "ITU-T G.997.1, paragraph #7.1.1.1"
DEFVAL { { noDefect } } DEFVAL { { noDefect } }
::= { xdsl2LineEntry 17 } ::= { xdsl2LineEntry 19 }
xdsl2LineStatusAttainableRateDs OBJECT-TYPE xdsl2LineStatusAttainableRateDs OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "bits/second" UNITS "bits/second"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"(ATTNDRds) "(ATTNDRds)
Maximum Attainable Data Rate Downstream. Maximum Attainable Data Rate Downstream.
The maximum downstream net data rate currently attainable by The maximum downstream net data rate currently attainable by
the xTU-C transmitter and the xTU-R receiver, coded in the xTU-C transmitter and the xTU-R receiver, coded in
bit/s." bit/s."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.19" REFERENCE "ITU-T G.997.1, paragraph #7.5.1.19"
DEFVAL { 0 } DEFVAL { 0 }
::= { xdsl2LineEntry 18 } ::= { xdsl2LineEntry 20 }
xdsl2LineStatusAttainableRateUs OBJECT-TYPE xdsl2LineStatusAttainableRateUs OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "bits/second" UNITS "bits/second"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"(ATTNDRus) "(ATTNDRus)
Maximum Attainable Data Rate Upstream. Maximum Attainable Data Rate Upstream.
The maximum upstream net data rate currently attainable by the The maximum upstream net data rate currently attainable by the
xTU-R transmitter and the xTU-C receiver, coded in bit/s." xTU-R transmitter and the xTU-C receiver, coded in bit/s."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.20" REFERENCE "ITU-T G.997.1, paragraph #7.5.1.20"
DEFVAL { 0 } DEFVAL { 0 }
::= { xdsl2LineEntry 19 } ::= { xdsl2LineEntry 21 }
xdsl2LineStatusActPsdDs OBJECT-TYPE xdsl2LineStatusActPsdDs OBJECT-TYPE
SYNTAX Integer32 (-900..0 | 2147483647) SYNTAX Integer32 (-900..0 | 2147483647)
UNITS "0.1 dBm/Hz" UNITS "0.1 dBm/Hz"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"(ACTPSDds) "(ACTPSDds)
Actual Power Spectrum Density (PSD) Downstream. The average Actual Power Spectrum Density (PSD) Downstream. The average
downstream transmit PSD over the sub-carriers used for downstream transmit PSD over the sub-carriers used for
downstream. It ranges from -900 to 0 units of 0.1 dBm/Hz downstream. It ranges from -900 to 0 units of 0.1 dBm/Hz
(Physical values are -90 to 0 dBm/Hz). (Physical values are -90 to 0 dBm/Hz).
A value of 0x7FFFFFFF (2147483647) indicates the measurement A value of 0x7FFFFFFF (2147483647) indicates the measurement
is out of range to be represented." is out of range to be represented."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.21" REFERENCE "ITU-T G.997.1, paragraph #7.5.1.21"
DEFVAL { 2147483647 } DEFVAL { 2147483647 }
::= { xdsl2LineEntry 20 } ::= { xdsl2LineEntry 22 }
xdsl2LineStatusActPsdUs OBJECT-TYPE xdsl2LineStatusActPsdUs OBJECT-TYPE
SYNTAX Integer32 (-900..0 | 2147483647) SYNTAX Integer32 (-900..0 | 2147483647)
UNITS "0.1 dBm/Hz" UNITS "0.1 dBm/Hz"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"(ACTPSDus) "(ACTPSDus)
Actual Power Spectrum Density (PSD) Upstream. The average Actual Power Spectrum Density (PSD) Upstream. The average
upstream transmit PSD over the sub-carriers used for upstream. upstream transmit PSD over the sub-carriers used for upstream.
It ranges from -900 to 0 units of 0.1 dBm/Hz (Physical values It ranges from -900 to 0 units of 0.1 dBm/Hz (Physical values
are -90 to 0 dBm/Hz). are -90 to 0 dBm/Hz).
A value of 0x7FFFFFFF (2147483647) indicates the measurement A value of 0x7FFFFFFF (2147483647) indicates the measurement
is out of range to be represented." is out of range to be represented."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.22" REFERENCE "ITU-T G.997.1, paragraph #7.5.1.22"
DEFVAL { 2147483647 } DEFVAL { 2147483647 }
::= { xdsl2LineEntry 21 } ::= { xdsl2LineEntry 23 }
xdsl2LineStatusActAtpDs OBJECT-TYPE xdsl2LineStatusActAtpDs OBJECT-TYPE
SYNTAX Integer32 (-310..310 | 2147483647) SYNTAX Integer32 (-310..310 | 2147483647)
UNITS "0.1 dBm" UNITS "0.1 dBm"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"(ACTATPds) "(ACTATPds)
Actual Aggregate Transmit Power Downstream. The total amount Actual Aggregate Transmit Power Downstream. The total amount
of transmit power delivered by the xTU-C at the U-C reference of transmit power delivered by the xTU-C at the U-C reference
point, at the instant of measurement. It ranges from -310 to point, at the instant of measurement. It ranges from -310 to
310 units of 0.1 dBm (Physical values are -31 to 31 dBm). 310 units of 0.1 dBm (Physical values are -31 to 31 dBm).
A value of 0x7FFFFFFF (2147483647) indicates the measurement A value of 0x7FFFFFFF (2147483647) indicates the measurement
is out of range to be represented." is out of range to be represented."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.24" REFERENCE "ITU-T G.997.1, paragraph #7.5.1.24"
DEFVAL { 2147483647 } DEFVAL { 2147483647 }
::= { xdsl2LineEntry 22 } ::= { xdsl2LineEntry 24 }
xdsl2LineStatusActAtpUs OBJECT-TYPE xdsl2LineStatusActAtpUs OBJECT-TYPE
SYNTAX Integer32 (-310..310 | 2147483647) SYNTAX Integer32 (-310..310 | 2147483647)
UNITS "0.1 dBm" UNITS "0.1 dBm"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"(ACTATPus) "(ACTATPus)
Actual Aggregate Transmit Power Upstream. The total amount of Actual Aggregate Transmit Power Upstream. The total amount of
transmit power delivered by the xTU-R at the U-R transmit power delivered by the xTU-R at the U-R
reference point, at the instant of measurement. It ranges reference point, at the instant of measurement. It ranges
from -310 to 310 units of 0.1 dBm (Physical values are -31 from -310 to 310 units of 0.1 dBm (Physical values are -31
to 31 dBm). to 31 dBm).
A value of 0x7FFFFFFF (2147483647) indicates the measurement A value of 0x7FFFFFFF (2147483647) indicates the measurement
is out of range to be represented." is out of range to be represented."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.25" REFERENCE "ITU-T G.997.1, paragraph #7.5.1.25"
DEFVAL { 2147483647 } DEFVAL { 2147483647 }
::= { xdsl2LineEntry 23 } ::= { xdsl2LineEntry 25 }
xdsl2LineStatusActProfile OBJECT-TYPE xdsl2LineStatusActProfile OBJECT-TYPE
SYNTAX Xdsl2LineProfiles SYNTAX Xdsl2LineProfiles
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The G.993.2 profile in use. "The G.993.2 profile in use.
The configuration parameter xdsl2LConfProfProfiles defines The configuration parameter xdsl2LConfProfProfiles defines
the set of allowed G.993.2 profiles. This parameter indicates the set of allowed G.993.2 profiles. This parameter indicates
the profile in use on this line. the profile in use on this line.
This parameter may be derived from the handshaking procedures This parameter may be derived from the handshaking procedures
defined in ITU-T Rec. G.994.1." defined in ITU-T Rec. G.994.1."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.2" REFERENCE "ITU-T G.997.1, paragraph #7.5.1.2"
DEFVAL { {} } DEFVAL { {} }
::= { xdsl2LineEntry 24 } ::= { xdsl2LineEntry 26 }
xdsl2LineStatusActLimitMask OBJECT-TYPE xdsl2LineStatusActLimitMask OBJECT-TYPE
SYNTAX Xdsl2LineLimitMask SYNTAX Xdsl2LineLimitMask
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The Limit PSD mask and band plan in use. "The Limit PSD mask and band plan in use.
The configuration parameter xdsl2LConfProfLimitMask defines The configuration parameter xdsl2LConfProfLimitMask defines
the set of allowed G.993.2 limit PSD masks. the set of allowed G.993.2 limit PSD masks.
This parameter indicates the limit PSD mask in use on This parameter indicates the limit PSD mask in use on
this line." this line."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.3" REFERENCE "ITU-T G.997.1, paragraph #7.5.1.3"
DEFVAL { {} } DEFVAL { {} }
::= { xdsl2LineEntry 25 } ::= { xdsl2LineEntry 27 }
xdsl2LineStatusActUs0Mask OBJECT-TYPE xdsl2LineStatusActUs0Mask OBJECT-TYPE
SYNTAX Xdsl2LineUs0Mask SYNTAX Xdsl2LineUs0Mask
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The US0 PSD mask in use. "The US0 PSD mask in use.
The configuration parameter xdsl2LConfProfUs0Mask defines The configuration parameter xdsl2LConfProfUs0Mask defines
the set of allowed US0 PSD masks. the set of allowed US0 PSD masks.
This parameter indicates the US0 PSD mask in use on This parameter indicates the US0 PSD mask in use on
this line. this line.
This parameter may be derived from the handshaking This parameter may be derived from the handshaking
procedures defined in ITU-T Rec. G.994.1." procedures defined in ITU-T Rec. G.994.1."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.4" REFERENCE "ITU-T G.997.1, paragraph #7.5.1.4"
DEFVAL { {} } DEFVAL { {} }
::= { xdsl2LineEntry 26 } ::= { xdsl2LineEntry 28 }
xdsl2LineStatusActSnrModeDs OBJECT-TYPE xdsl2LineStatusActSnrModeDs OBJECT-TYPE
SYNTAX Xdsl2LineSnrMode SYNTAX Xdsl2LineSnrMode
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This parameter indicates if the transmitter "This parameter indicates if the transmitter
referred virtual noise is active on the line in the referred virtual noise is active on the line in the
downstream direction. downstream direction.
The configuration parameter xdsl2LConfProfSnrModeDs The configuration parameter xdsl2LConfProfSnrModeDs
is used to configure referred virtual noise." is used to configure referred virtual noise."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.15 (ACTSNRMODEds)" REFERENCE "ITU-T G.997.1, paragraph #7.5.1.15 (ACTSNRMODEds)"
DEFVAL { virtualNoiseDisabled } DEFVAL { virtualNoiseDisabled }
::= { xdsl2LineEntry 27 } ::= { xdsl2LineEntry 29 }
xdsl2LineStatusActSnrModeUs OBJECT-TYPE xdsl2LineStatusActSnrModeUs OBJECT-TYPE
SYNTAX Xdsl2LineSnrMode SYNTAX Xdsl2LineSnrMode
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This parameter indicates if the transmitter "This parameter indicates if the transmitter
referred virtual noise is active on the line in the referred virtual noise is active on the line in the
upstream direction. upstream direction.
The configuration parameter xdsl2LConfProfSnrModeUs is The configuration parameter xdsl2LConfProfSnrModeUs is
used to configure referred virtual noise." used to configure referred virtual noise."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.18 (ACTSNRMODEus)" REFERENCE "ITU-T G.997.1, paragraph #7.5.1.18 (ACTSNRMODEus)"
DEFVAL { virtualNoiseDisabled } DEFVAL { virtualNoiseDisabled }
::= { xdsl2LineEntry 28 } ::= { xdsl2LineEntry 30 }
xdsl2LineStatusElectricalLength OBJECT-TYPE xdsl2LineStatusElectricalLength OBJECT-TYPE
SYNTAX Unsigned32 (0..1280) SYNTAX Unsigned32 (0..1280)
UNITS "0.1 dB" UNITS "0.1 dB"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"(UPBOKLE) "(UPBOKLE)
This parameter contains the estimated electrical length This parameter contains the estimated electrical length
expressed in dB at 1 MHz, kl0. This is the final electrical expressed in dB at 1 MHz, kl0. This is the final electrical
length that would have been sent from the VTU-O to VTU-R if length that would have been sent from the VTU-O to VTU-R if
the electrical length was not forced by the CO-MIB. the electrical length was not forced by the CO-MIB.
The value ranges from 0 to 128 dB in steps of 0.1 dB." The value ranges from 0 to 128 dB in steps of 0.1 dB."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.23" REFERENCE "ITU-T G.997.1, paragraph #7.5.1.23"
DEFVAL { 0 } DEFVAL { 0 }
::= { xdsl2LineEntry 29 } ::= { xdsl2LineEntry 31 }
xdsl2LineStatusTssiDs OBJECT-TYPE
SYNTAX Xdsl2Tssi
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The transmit spectrum shaping (TSSi) breakpoints expressed
as the set of breakpoints exchanged during G.994.1.
Each breakpoint is a pair of values occupying 3 octets with the
following structure:
First 2 octets - Index of the subcarrier used in the context of
the breakpoint.
Third octet - The shaping parameter at the breakpoint.
Subcarrier index is an unsigned number in the range 1 to NSCds.
The shaping parameter value is in the range 0 to 126 (units of
-0.5dB). The special value 127 indicates that the subcarrier
is not transmitted."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.29.5 (TSSpsds)"
::= { xdsl2LineEntry 32 }
xdsl2LineStatusTssiUs OBJECT-TYPE
SYNTAX Xdsl2Tssi
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The transmit spectrum shaping (TSSi) breakpoints expressed
as the set of breakpoints exchanged during G.994.1.
Each breakpoint is a pair of values occupying 3 octets with the
following structure:
First 2 octets - Index of the subcarrier used in the context of
the breakpoint.
Third octet - The shaping parameter at the breakpoint.
Subcarrier index is an unsigned number in the range 1 to NSCus.
The shaping parameter value is in the range 0 to 126 (units of
-0.5dB). The special value 127 indicates that the subcarrier
is not transmitted."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.29.6 (TSSpsus)"
::= { xdsl2LineEntry 33 }
xdsl2LineStatusMrefPsdDs OBJECT-TYPE
SYNTAX Xdsl2MrefPsdDs
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MEDLEY Reference PSD status parameters on
downstreasm direction expressed as the set of breakpoints
exchanged at initialization.
The OCTET STRING contains up to 48 pairs
of values in the following structure:
Octets 0&1 -- Index of 1st subcarrier used
in the context of a first breakpoint.
Octets 2&3 -- The PSD level for the
subcarrier indicated in octets 0&1.
Octets 4-7 -- Same, for a 2nd breakpoint
Octets 8-11 -- Same, for a 3rd breakpoint
And so on until
Octets 188-191 -- Same, for a 48th breakpoint.
Each subcarrier index is an unsigned number
in the range 1 and NSds (i.e., highest
supported sub carrier index on downstream
direction).
The PSD level is an integer value in the 0 to
4095 range. It is represented in units of 0.1
dB offset from -140dBm/Hz."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.29.7 (MREFpsds)"
::= { xdsl2LineEntry 34 }
xdsl2LineStatusMrefPsdUs OBJECT-TYPE
SYNTAX Xdsl2MrefPsdUs
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The MEDLEY Reference PSD status parameters on
upstreasm direction expressed as the set of breakpoints
exchanged at initialization.
The OCTET STRING contains up to 32 pairs
of values in the following structure:
Octets 0&1 -- Index of 1st subcarrier used
in the context of a first breakpoint.
Octets 2&3 -- The PSD level for the
subcarrier indicated in octets 0&1.
Octets 4-7 -- Same, for a 2nd breakpoint
Octets 8-11 -- Same, for a 3rd breakpoint
And so on until
Octets 124-127 -- Same, for a 32nd breakpoint.
Each subcarrier index is an unsigned number
in the range 1 and NSus (i.e., highest
supported sub carrier index on upstream
direction).
The PSD level is an integer value in the 0 to
4095 range. It is represented in units of 0.1
dB offset from -140dBm/Hz."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.29.8 (MREFpsus)"
::= { xdsl2LineEntry 35 }
xdsl2LineStatusTrellisDs OBJECT-TYPE xdsl2LineStatusTrellisDs OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This parameter reports whether trellis coding "This parameter reports whether trellis coding
is in use in the downstream direction." is in use in the downstream direction."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.30" REFERENCE "ITU-T G.997.1, paragraph #7.5.1.30"
DEFVAL { false } DEFVAL { false }
::= { xdsl2LineEntry 30 } ::= { xdsl2LineEntry 36 }
xdsl2LineStatusTrellisUs OBJECT-TYPE xdsl2LineStatusTrellisUs OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This parameter reports whether trellis coding "This parameter reports whether trellis coding
is in use in the upstream direction." is in use in the upstream direction."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.31" REFERENCE "ITU-T G.997.1, paragraph #7.5.1.31"
DEFVAL { false } DEFVAL { false }
::= { xdsl2LineEntry 31 } ::= { xdsl2LineEntry 37 }
xdsl2LineStatusActualCe OBJECT-TYPE xdsl2LineStatusActualCe OBJECT-TYPE
SYNTAX Unsigned32 (2..16) SYNTAX Unsigned32 (2..16)
UNITS "N/32 samples" UNITS "N/32 samples"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"(ACTUALCE) "(ACTUALCE)
This parameter reports the cyclic extension This parameter reports the cyclic extension
used on the line. It is coded as an unsigned integer from used on the line. It is coded as an unsigned integer from
2 to 16 in units of N/32 samples, where 2N is the IDFT size." 2 to 16 in units of N/32 samples, where 2N is the IDFT size."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.32" REFERENCE "ITU-T G.997.1, paragraph #7.5.1.32"
DEFVAL { 2 } DEFVAL { 2 }
::= { xdsl2LineEntry 32 } ::= { xdsl2LineEntry 38 }
------------------------------------------------ ------------------------------------------------
-- xdsl2LineSegmentTable -- -- xdsl2LineSegmentTable --
------------------------------------------------ ------------------------------------------------
xdsl2LineSegmentTable OBJECT-TYPE xdsl2LineSegmentTable OBJECT-TYPE
SYNTAX SEQUENCE OF Xdsl2LineSegmentEntry SYNTAX SEQUENCE OF Xdsl2LineSegmentEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table xdsl2LineSegmentTable contains status "The table xdsl2LineSegmentTable contains status
skipping to change at page 79, line 5 skipping to change at page 85, line 35
::= { xdsl2Status 1 } ::= { xdsl2Status 1 }
xdsl2LineSegmentEntry OBJECT-TYPE xdsl2LineSegmentEntry OBJECT-TYPE
SYNTAX Xdsl2LineSegmentEntry SYNTAX Xdsl2LineSegmentEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table xdsl2LineSegmentEntry contains status "The table xdsl2LineSegmentEntry contains status
parameters of VDSL2/ADSL/ADSL2 and ADSL2+ sub-carriers. parameters of VDSL2/ADSL/ADSL2 and ADSL2+ sub-carriers.
Objects in the table refer to NSus and NSds. For Objects in the table refer to NSus and NSds. For G.993.2, the
G.993.2, the value of NSus and NSds are respectively the indices value of NSus and NSds are respectively the indices
of the highest supported upstream and downstream subcarriers of the highest supported upstream and downstream subcarriers
according to the selected implementation profile. For ADSL, according to the selected implementation profile. For ADSL,
NSus is equal to NSCus-1 and NSds is equal to NSCds-1. NSus is equal to NSCus-1 and NSds is equal to NSCds-1.
One index of this table is an interface index where the One index of this table is an interface index where the
interface has an ifType of vdsl2(xxx). A second index of this interface has an ifType of vdsl2(xxx). A second index of this
table is the transmission direction. A third index identifies table is the transmission direction. A third index identifies
the specific segment of the sub-carriers status addressed." the specific segment of the sub-carriers status addressed."
INDEX { ifIndex, INDEX { ifIndex,
xdsl2LineSegmentDirection, xdsl2LineSegmentDirection,
skipping to change at page 80, line 21 skipping to change at page 87, line 4
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The bits allocation per sub-carrier. An array of 256 octets "The bits allocation per sub-carrier. An array of 256 octets
(512 nibbles), designed for supporting up to 512 (downstream) (512 nibbles), designed for supporting up to 512 (downstream)
sub-carriers. When more then 512 sub-carriers are supported, sub-carriers. When more then 512 sub-carriers are supported,
the status information is reported through multiple (up to 8) the status information is reported through multiple (up to 8)
segments. The first segment is then used for the first 512 segments. The first segment is then used for the first 512
sub-carriers. The second segment is used for the sub-carriers sub-carriers. The second segment is used for the sub-carriers
512 to 1023 and so on. 512 to 1023 and so on.
The aggregate number of utilized nibbles on downstream direction
(in all segments) depends on NSds, and on upstream direction it The aggregate number of utilized nibbles on downstream
depends on NSus. direction (in all segments) depends on NSds, and on upstream
direction it depends on NSus.
This value is referred here as NS. The segment number is in This value is referred here as NS. The segment number is in
xdsl2SCStatusSegment. xdsl2SCStatusSegment.
Nibble i (0 <= i < MIN(NS-(segment-1)*512,512)) in each Nibble i (0 <= i < MIN(NS-(segment-1)*512,512)) in each
segment is set to a value in the range 0 to 15 to indicate that segment is set to a value in the range 0 to 15 to indicate that
the respective downstream or upstream sub-carrier j the respective downstream or upstream sub-carrier j
(j=(segement-1)*512+i) has the same amount of bits (j=(segement-1)*512+i) has the same amount of bits
allocation." allocation."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.29.1 (BITSpsds) REFERENCE "ITU-T G.997.1, paragraph #7.5.1.29.1 (BITSpsds)
and paragraph #7.5.1.29.2 (BITSpsus)" and paragraph #7.5.1.29.2 (BITSpsus)"
::= { xdsl2LineSegmentEntry 3 } ::= { xdsl2LineSegmentEntry 3 }
skipping to change at page 81, line 24 skipping to change at page 88, line 8
-- xdsl2LineBandTable -- -- xdsl2LineBandTable --
------------------------------------------------ ------------------------------------------------
xdsl2LineBandTable OBJECT-TYPE xdsl2LineBandTable OBJECT-TYPE
SYNTAX SEQUENCE OF Xdsl2LineBandEntry SYNTAX SEQUENCE OF Xdsl2LineBandEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table xdsl2LineBandTable contains the, "The table xdsl2LineBandTable contains the,
per-band line status parameters of the VDSL2/ADSL/ADSL2 per-band line status parameters of the VDSL2/ADSL/ADSL2
or ADSL2+ line. or ADSL2+ line.
The indexes of this table consist of an interface index where the The indexes of this table consist of an interface index where
interface has an ifType of vdsl2(xxx), together with a the interface has an ifType of vdsl2(xxx), together with a
per-band index covering both VDSL2 and ADSL/ADSL2/ADSL2+. per-band index covering both VDSL2 and ADSL/ADSL2/ADSL2+.
The parameters in this table are updated at The parameters in this table are updated at
line initialisation time and at showtime." line initialisation time and at showtime."
::= { xdsl2Line 2 } ::= { xdsl2Line 2 }
xdsl2LineBandEntry OBJECT-TYPE xdsl2LineBandEntry OBJECT-TYPE
SYNTAX Xdsl2LineBandEntry SYNTAX Xdsl2LineBandEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
skipping to change at page 82, line 11 skipping to change at page 88, line 43
xdsl2LineBand OBJECT-TYPE xdsl2LineBand OBJECT-TYPE
SYNTAX Xdsl2Band SYNTAX Xdsl2Band
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Identifies the band(s) associated with this line. "Identifies the band(s) associated with this line.
For ADSL/ADSL2/ADSL2+ the values upstream(1) and downstream(2) For ADSL/ADSL2/ADSL2+ the values upstream(1) and downstream(2)
will always be present. will always be present.
For VDSL2, a subset of {us0(3), ds1(4), us1(5) ... } For VDSL2, a subset of {us0(3), ds1(4), us1(5) ... }
will always be present (See Xdsl2Band for more details)." will always be present (See Xdsl2Band for more details)
together with rows for upstream(1) and downstream(2) in
which only the xdsl2LineBandStatusSnrMargin attribute is
expected to hold a valid (average) measurement."
::= { xdsl2LineBandEntry 1 } ::= { xdsl2LineBandEntry 1 }
xdsl2LineBandStatusLnAtten OBJECT-TYPE xdsl2LineBandStatusLnAtten OBJECT-TYPE
SYNTAX Unsigned32 (0..1270 | 2147483646 | 2147483647) SYNTAX Unsigned32 (0..1270 | 2147483646 | 2147483647)
UNITS "0.1 dB" UNITS "0.1 dB"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Line Attenuation. "Line Attenuation.
When referring to a band in the downstream direction, it is the When referring to a band in the downstream direction, it is
measured difference in the total power transmitted by the xTU-C the measured difference in the total power transmitted by the
and the total power received by the xTU-R over all sub-carriers xTU-C and the total power received by the xTU-R over all sub-
of that band during initialization. carriers of that band during initialization.
When referring to a band in the upstream direction, it is the When referring to a band in the upstream direction, it is the
measured difference in the total power transmitted by the xTU-R measured difference in the total power transmitted by the
and the total power received by the xTU-C over all sub-carriers xTU-R and the total power received by the xTU-C over all sub-
of that band during initialization. carriers of that band during initialization.
Values range from 0 to 1270 in units of 0.1 dB (Physical values Values range from 0 to 1270 in units of 0.1 dB (Physical
are 0 to 127 dB). values are 0 to 127 dB).
A special value of 0x7FFFFFFF (2147483647) indicates the line A special value of 0x7FFFFFFF (2147483647) indicates the line
attenuation is out of range to be represented. attenuation is out of range to be represented.
A special value of 0x7FFFFFFE (2147483646) indicates the line A special value of 0x7FFFFFFE (2147483646) indicates the line
attenuation measurement is unavailable." attenuation measurement is unavailable."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.9 (LATNds) REFERENCE "ITU-T G.997.1, paragraph #7.5.1.9 (LATNds)
and paragraph #7.5.1.10 (LATNus)6" and paragraph #7.5.1.10 (LATNus)6"
DEFVAL { 2147483646 } DEFVAL { 2147483646 }
::= { xdsl2LineBandEntry 2 } ::= { xdsl2LineBandEntry 2 }
xdsl2LineBandStatusSigAtten OBJECT-TYPE xdsl2LineBandStatusSigAtten OBJECT-TYPE
SYNTAX Unsigned32 (0..1270 | 2147483646 | 2147483647) SYNTAX Unsigned32 (0..1270 | 2147483646 | 2147483647)
UNITS "0.1 dB" UNITS "0.1 dB"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Signal Attenuation. "Signal Attenuation.
When referring to a band in the downstream direction, it is the When referring to a band in the downstream direction, it is
measured difference in the total power transmitted by the xTU-C the measured difference in the total power transmitted by the
and the total power received by the xTU-R over all sub-carriers xTU-C and the total power received by the xTU-R over all sub-
of that band during Showtime. carriers of that band during Showtime.
When referring to a band in the upstream direction, it is the When referring to a band in the upstream direction, it is the
measured difference in the total power transmitted by the xTU-R measured difference in the total power transmitted by the
and the total power received by the xTU-C over all sub-carriers xTU-R and the total power received by the xTU-C over all sub-
of that band during Showtime. carriers of that band during Showtime.
Values range from 0 to 1270 in units of 0.1 dB (Physical values Values range from 0 to 1270 in units of 0.1 dB (Physical
are 0 to 127 dB). values are 0 to 127 dB).
A special value of 0x7FFFFFFF (2147483647) indicates the line A special value of 0x7FFFFFFF (2147483647) indicates the line
attenuation is out of range to be represented. attenuation is out of range to be represented.
A special value of 0x7FFFFFFE (2147483646) indicates the line A special value of 0x7FFFFFFE (2147483646) indicates the line
attenuation measurement is unavailable." attenuation measurement is unavailable."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.11 (SATNds) REFERENCE "ITU-T G.997.1, paragraph #7.5.1.11 (SATNds)
and paragraph #7.5.1.12 (SATNus)" and paragraph #7.5.1.12 (SATNus)"
DEFVAL { 2147483646 } DEFVAL { 2147483646 }
::= { xdsl2LineBandEntry 3 } ::= { xdsl2LineBandEntry 3 }
xdsl2LineBandStatusSnrMargin OBJECT-TYPE xdsl2LineBandStatusSnrMargin OBJECT-TYPE
SYNTAX Integer32 (-640..630 | 2147483646 | 2147483647) SYNTAX Integer32 (-640..630 | 2147483646 | 2147483647)
UNITS "0.1 dB" UNITS "0.1 dB"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"SNR Margin is the maximum increase in dB of the noise power "SNR Margin is the maximum increase in dB of the noise power
received at the XTU (xTU-R for a band in the downstream direction received at the XTU (xTU-R for a band in the downstream
and xTU-C for a band in the upstream direction), such that direction and xTU-C for a band in the upstream direction),
the BER requirements are met for all bearer channels received such that the BER requirements are met for all bearer channels
at the XTU. Values range from -640 to 630 in units of 0.1 dB received at the XTU. Values range from -640 to 630 in units of
(Physical values are -64 to 63 dB). 0.1 dB (Physical values are -64 to 63 dB).
A special value of 0x7FFFFFFF (2147483647) indicates the A special value of 0x7FFFFFFF (2147483647) indicates the
SNR Margin is out of range to be represented. SNR Margin is out of range to be represented.
A special value of 0x7FFFFFFE (2147483646) indicates the A special value of 0x7FFFFFFE (2147483646) indicates the
SNR Margin measurement is currently unavailable." SNR Margin measurement is currently unavailable."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.13 (SNRMds) REFERENCE "ITU-T G.997.1, paragraph #7.5.1.13 (SNRMds)
and paragraph #7.5.1.14 (SNRMpbds) and paragraph #7.5.1.14 (SNRMpbds)
and paragraph #7.5.1.16 (SNRMus) and paragraph #7.5.1.16 (SNRMus)
and paragraph #7.5.1.17 (SNRMpbus)" and paragraph #7.5.1.17 (SNRMpbus)"
DEFVAL { 2147483646 } DEFVAL { 2147483646 }
::= { xdsl2LineBandEntry 4 } ::= { xdsl2LineBandEntry 4 }
skipping to change at page 84, line 17 skipping to change at page 91, line 4
This table contains live data from equipment. " This table contains live data from equipment. "
::= { xdsl2Status 2 } ::= { xdsl2Status 2 }
xdsl2ChannelStatusEntry OBJECT-TYPE xdsl2ChannelStatusEntry OBJECT-TYPE
SYNTAX Xdsl2ChannelStatusEntry SYNTAX Xdsl2ChannelStatusEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table xdsl2ChannelStatusTable contains status "The table xdsl2ChannelStatusTable contains status
parameters of VDSL2/ADSL/ADSL2 or ADSL2+ channel. parameters of VDSL2/ADSL/ADSL2 or ADSL2+ channel.
The index of this table is an interface index where The index of this table is an interface index where
the interface has an ifType value that is applicable the interface has an ifType value that is applicable
for a DSL channel and the termination unit." for a DSL channel and the termination unit."
INDEX { ifIndex, xdsl2ChStatusUnit } INDEX { ifIndex, xdsl2ChStatusUnit }
::= { xdsl2ChannelStatusTable 1 } ::= { xdsl2ChannelStatusTable 1 }
Xdsl2ChannelStatusEntry ::= Xdsl2ChannelStatusEntry ::=
SEQUENCE { SEQUENCE {
xdsl2ChStatusUnit Xdsl2Unit, xdsl2ChStatusUnit Xdsl2Unit,
xdsl2ChStatusChannelNum Unsigned32,
xdsl2ChStatusActDataRate Unsigned32, xdsl2ChStatusActDataRate Unsigned32,
xdsl2ChStatusPrevDataRate Unsigned32, xdsl2ChStatusPrevDataRate Unsigned32,
xdsl2ChStatusActDelay Unsigned32, xdsl2ChStatusActDelay Unsigned32,
xdsl2ChStatusActInp Unsigned32, xdsl2ChStatusActInp Unsigned32,
xdsl2ChStatusInpReport Xdsl2ChInpReport, xdsl2ChStatusInpReport Xdsl2ChInpReport,
xdsl2ChStatusNFec Unsigned32, xdsl2ChStatusNFec Unsigned32,
xdsl2ChStatusRFec Unsigned32, xdsl2ChStatusRFec Unsigned32,
xdsl2ChStatusLSymb Unsigned32, xdsl2ChStatusLSymb Unsigned32,
xdsl2ChStatusIntlvDepth Unsigned32, xdsl2ChStatusIntlvDepth Unsigned32,
xdsl2ChStatusIntlvBlock Unsigned32, xdsl2ChStatusIntlvBlock Unsigned32,
skipping to change at page 84, line 50 skipping to change at page 91, line 37
} }
xdsl2ChStatusUnit OBJECT-TYPE xdsl2ChStatusUnit OBJECT-TYPE
SYNTAX Xdsl2Unit SYNTAX Xdsl2Unit
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The termination unit xtuc(1) or xtur(2)." "The termination unit xtuc(1) or xtur(2)."
::= { xdsl2ChannelStatusEntry 1 } ::= { xdsl2ChannelStatusEntry 1 }
xdsl2ChStatusChannelNum OBJECT-TYPE
SYNTAX Unsigned32(1..4)
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Provides the bearer channel number associated with this
row.
Note that for a given XDSL line and termination unit,
the channel number must be unique.
This enables determining the channel configuration profile
and the channel thresholds profile applicable for this
bearer channel."
DEFVAL { 1 }
::= { xdsl2ChannelStatusEntry 2 }
xdsl2ChStatusActDataRate OBJECT-TYPE xdsl2ChStatusActDataRate OBJECT-TYPE
SYNTAX Unsigned32(0..200000000) SYNTAX Unsigned32(0..200000000)
UNITS "bits/second" UNITS "bits/second"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The actual net data rate that the bearer channel is "The actual net data rate that the bearer channel is
operating operating
at, if in L0 power management state. In L1 or L2 states, it at, if in L0 power management state. In L1 or L2 states, it
relates to the previous L0 state. The data rate is coded in relates to the previous L0 state. The data rate is coded in
bit/s." bit/s."
REFERENCE "ITU-T G.997.1, paragraph #7.5.2.1" REFERENCE "ITU-T G.997.1, paragraph #7.5.2.1"
DEFVAL { 0 } DEFVAL { 0 }
::= { xdsl2ChannelStatusEntry 3 } ::= { xdsl2ChannelStatusEntry 2 }
xdsl2ChStatusPrevDataRate OBJECT-TYPE xdsl2ChStatusPrevDataRate OBJECT-TYPE
SYNTAX Unsigned32(0..200000000) SYNTAX Unsigned32(0..200000000)
UNITS "bits/second" UNITS "bits/second"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The previous net data rate that the bearer channel was "The previous net data rate that the bearer channel was
operating at just before the latest rate change event. This operating at just before the latest rate change event. This
could be a full or short initialization, fast retrain, DRA or could be a full or short initialization, fast retrain, DRA or
power management transitions, excluding transitions between L0 power management transitions, excluding transitions between L0
state and L1 or L2 states. The data rate is coded in state and L1 or L2 states. The data rate is coded in
bit/s." bit/s."
REFERENCE "ITU-T G.997.1, paragraph #7.5.2.2" REFERENCE "ITU-T G.997.1, paragraph #7.5.2.2"
DEFVAL { 0 } DEFVAL { 0 }
::= { xdsl2ChannelStatusEntry 4 } ::= { xdsl2ChannelStatusEntry 3 }
xdsl2ChStatusActDelay OBJECT-TYPE xdsl2ChStatusActDelay OBJECT-TYPE
SYNTAX Unsigned32(0..8176) SYNTAX Unsigned32(0..8176)
UNITS "milliseconds" UNITS "milliseconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The actual one-way interleaving delay introduced by the "The actual one-way interleaving delay introduced by the
PMS-TC in the direction of the bearer channel, if in L0 PMS-TC in the direction of the bearer channel, if in L0
power management state. In L1 or L2 states, it relates to power management state. In L1 or L2 states, it relates to
the previous L0 state. It is coded in ms (rounded to the the previous L0 state. It is coded in ms (rounded to the
nearest ms)." nearest ms)."
REFERENCE "ITU-T G.997.1, paragraph #7.5.2.3" REFERENCE "ITU-T G.997.1, paragraph #7.5.2.3"
DEFVAL { 0 } DEFVAL { 0 }
::= { xdsl2ChannelStatusEntry 5 } ::= { xdsl2ChannelStatusEntry 4 }
xdsl2ChStatusActInp OBJECT-TYPE xdsl2ChStatusActInp OBJECT-TYPE
SYNTAX Unsigned32(0..255) SYNTAX Unsigned32(0..255)
UNITS "0.1 symbols" UNITS "0.1 symbols"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"(ACTINP) "(ACTINP)
Actual impulse noise protection. Actual impulse noise protection.
This parameter reports the actual impulse noise This parameter reports the actual impulse noise
skipping to change at page 86, line 33 skipping to change at page 93, line 4
This parameter reports the actual impulse noise This parameter reports the actual impulse noise
protection (INP) on the bearer channel in the L0 protection (INP) on the bearer channel in the L0
state. In the L1 or L2 state, the parameter contains the state. In the L1 or L2 state, the parameter contains the
INP in the previous L0 state. For ADSL, this value is INP in the previous L0 state. For ADSL, this value is
computed according to the formula specified in the computed according to the formula specified in the
relevant Recommendation based on the actual framing relevant Recommendation based on the actual framing
parameters. For ITU-T Rec. G.993.2, the method to parameters. For ITU-T Rec. G.993.2, the method to
report this value is according to the INPREPORT report this value is according to the INPREPORT
parameter. The value is coded in fractions of DMT parameter. The value is coded in fractions of DMT
symbols with a granularity of 0.1 symbols. symbols with a granularity of 0.1 symbols.
The range is from 0 to 25.4. The special value The range is from 0 to 25.4. The special value
of 255 indicates an ACTINP higher than 25.4." of 255 indicates an ACTINP higher than 25.4."
REFERENCE "ITU-T G.997.1, paragraph #7.5.2.4" REFERENCE "ITU-T G.997.1, paragraph #7.5.2.4"
DEFVAL { 0 } DEFVAL { 0 }
::= { xdsl2ChannelStatusEntry 6 } ::= { xdsl2ChannelStatusEntry 5 }
xdsl2ChStatusInpReport OBJECT-TYPE xdsl2ChStatusInpReport OBJECT-TYPE
SYNTAX Xdsl2ChInpReport SYNTAX Xdsl2ChInpReport
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"(INPREPORT) "(INPREPORT)
Impulse noise protection reporting mode. Impulse noise protection reporting mode.
This parameter reports the method used to compute This parameter reports the method used to compute
the ACTINP. If set to inpComputedUsingFormula(1), the ACTINP. If set to inpComputedUsingFormula(1),
the ACTINP is computed according to the INP_no_erasure the ACTINP is computed according to the INP_no_erasure
formula (9.6/G.993.2). If set to inpEstimatedByXtur(2), formula (9.6/G.993.2). If set to inpEstimatedByXtur(2),
the ACTINP is the value estimated by the xTU receiver. the ACTINP is the value estimated by the xTU receiver."
In ITU-T Rec. G.993.2, no means are specified to retrieve REFERENCE "ITU-T G.997.1 Amendment 1, paragraph #7.5.2.5"
the impulse noise protection estimated by the far-end VTU
receiver. Therefore, the far-end ACTINP shall be computed
according to INP_no_erasure formula and the far-end INPREPORT
shall be set to inpComputedUsingFormula(1)."
REFERENCE "ITU-T G.997.1, paragraph #7.5.2.5"
DEFVAL { inpComputedUsingFormula } DEFVAL { inpComputedUsingFormula }
::= { xdsl2ChannelStatusEntry 7 } ::= { xdsl2ChannelStatusEntry 6 }
xdsl2ChStatusNFec OBJECT-TYPE xdsl2ChStatusNFec OBJECT-TYPE
SYNTAX Unsigned32(0..255) SYNTAX Unsigned32(0..255)
UNITS "bytes" UNITS "bytes"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"(NFEC) "(NFEC)
Actual size of Reed-Solomon codeword. Actual size of Reed-Solomon codeword.
This parameter reports the actual number of Reed-Solomon This parameter reports the actual number of Reed-Solomon
redundancy bytes per codeword used in the latency path redundancy bytes per codeword used in the latency path
in which the bearer channel is transported. The value is in which the bearer channel is transported. The value is
coded in bytes. It ranges from 0 to 16. coded in bytes. It ranges from 0 to 16.
The value 0 indicates no Reed-Solomon coding." The value 0 indicates no Reed-Solomon coding."
REFERENCE "ITU-T G.997.1, paragraph #7.5.2.6.1" REFERENCE "ITU-T G.997.1, paragraph #7.5.2.6.1"
DEFVAL { 0 } DEFVAL { 0 }
::= { xdsl2ChannelStatusEntry 8 } ::= { xdsl2ChannelStatusEntry 7 }
xdsl2ChStatusRFec OBJECT-TYPE xdsl2ChStatusRFec OBJECT-TYPE
SYNTAX Unsigned32(0..16) SYNTAX Unsigned32(0..16)
UNITS "bits" UNITS "bits"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"(RFEC) "(RFEC)
Actual number of Reed-Solomon redundancy bytes. Actual number of Reed-Solomon redundancy bytes.
This parameter reports the actual number of Reed-Solomon This parameter reports the actual number of Reed-Solomon
redundancy bytes per codeword used in the latency path redundancy bytes per codeword used in the latency path
in which the bearer channel is transported. The value is in which the bearer channel is transported. The value is
coded in bytes. It ranges from 0 to 16. coded in bytes. It ranges from 0 to 16.
The value 0 indicates no Reed-Solomon coding." The value 0 indicates no Reed-Solomon coding."
REFERENCE "ITU-T G.997.1, paragraph #7.5.2.6.2" REFERENCE "ITU-T G.997.1, paragraph #7.5.2.6.2"
DEFVAL { 0 } DEFVAL { 0 }
::= { xdsl2ChannelStatusEntry 9 } ::= { xdsl2ChannelStatusEntry 8 }
xdsl2ChStatusLSymb OBJECT-TYPE xdsl2ChStatusLSymb OBJECT-TYPE
SYNTAX Unsigned32(0..65535) SYNTAX Unsigned32(0..65535)
UNITS "bits" UNITS "bits"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"(LSYMB) "(LSYMB)
Actual number of bits per symbol. Actual number of bits per symbol.
This parameter reports the actual number of bits per This parameter reports the actual number of bits per
symbol assigned to the latency path in which the bearer symbol assigned to the latency path in which the bearer
channel is transported. This value does not include channel is transported. This value does not include
trellis overhead. The value is coded in bits. trellis overhead. The value is coded in bits.
It ranges from 0 to 65535." It ranges from 0 to 65535."
REFERENCE "ITU-T G.997.1, paragraph #7.5.2.6.3" REFERENCE "ITU-T G.997.1, paragraph #7.5.2.6.3"
DEFVAL { 0 } DEFVAL { 0 }
::= { xdsl2ChannelStatusEntry 10 } ::= { xdsl2ChannelStatusEntry 9 }
xdsl2ChStatusIntlvDepth OBJECT-TYPE xdsl2ChStatusIntlvDepth OBJECT-TYPE
SYNTAX Unsigned32(1..4096) SYNTAX Unsigned32(1..4096)
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"(INTLVDEPTH) "(INTLVDEPTH)
Actual interleaving depth. Actual interleaving depth.
This parameter reports the actual depth of the interleaver This parameter reports the actual depth of the interleaver
used in the latency path in which the bearer channel is used in the latency path in which the bearer channel is
transported. The value ranges from 1 to 4096 in steps of 1. transported. The value ranges from 1 to 4096 in steps of 1.
The value 1 indicates no interleaving." The value 1 indicates no interleaving."
REFERENCE "ITU-T G.997.1, paragraph #7.5.2.6.4" REFERENCE "ITU-T G.997.1, paragraph #7.5.2.6.4"
DEFVAL { 1 } DEFVAL { 1 }
::= { xdsl2ChannelStatusEntry 11 } ::= { xdsl2ChannelStatusEntry 10 }
xdsl2ChStatusIntlvBlock OBJECT-TYPE xdsl2ChStatusIntlvBlock OBJECT-TYPE
SYNTAX Unsigned32(4..255) SYNTAX Unsigned32(4..255)
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"(INTLVBLOCK) "(INTLVBLOCK)
Actual interleaving block length. Actual interleaving block length.
This parameter reports the actual block length of the This parameter reports the actual block length of the
interleaver used in the latency path in which the bearer interleaver used in the latency path in which the bearer
channel is transported. channel is transported.
The value ranges from 4 to 255 in steps of 1." The value ranges from 4 to 255 in steps of 1."
REFERENCE "ITU-T G.997.1, paragraph #7.5.2.6.5" REFERENCE "ITU-T G.997.1, paragraph #7.5.2.6.5"
DEFVAL { 4 } DEFVAL { 4 }
::= { xdsl2ChannelStatusEntry 12 } ::= { xdsl2ChannelStatusEntry 11 }
xdsl2ChStatusLPath OBJECT-TYPE xdsl2ChStatusLPath OBJECT-TYPE
SYNTAX Unsigned32(0..1) SYNTAX Unsigned32(0..3)
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"(LPATH) "(LPATH)
Actual latency path. Actual latency path.
This parameter reports the index of the actual latency This parameter reports the index of the actual latency
path in which the bearer is transported. path in which the bearer is transported.
The valid values are 0, and 1." The valid values are 0, 1, 2 and 3.
REFERENCE "ITU-T G.997.1, paragraph #7.5.2.7" For G.992.1, the FAST path shall be mapped to the latency
index 0, and the INTERLEAVED path shall be mapped to the
latency index 1."
REFERENCE "ITU-T G.997.1 amendment 1, paragraph #7.5.2.7"
DEFVAL { 0 } DEFVAL { 0 }
::= { xdsl2ChannelStatusEntry 13 } ::= { xdsl2ChannelStatusEntry 12 }
xdsl2ChStatusAtmStatus OBJECT-TYPE xdsl2ChStatusAtmStatus OBJECT-TYPE
SYNTAX Xdsl2ChAtmStatus SYNTAX Xdsl2ChAtmStatus
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates current state (existing failures) of the DSL "Indicates current state (existing failures) of the DSL
channel in case its Data Path is ATM. This is a bit-map of channel in case its Data Path is ATM. This is a bit-map of
possible conditions. The various bit positions are: possible conditions. The various bit positions are:
noDefect (0), noDefect (0),
noCellDelineation(1), noCellDelineation(1),
lossOfCellDelineation (2). lossOfCellDelineation (2).
In case the channel is not of ATM Data Path the object is set In case the channel is not of ATM Data Path the object is set
to '0'." to '0'."
REFERENCE "ITU-T G.997.1, paragraph #7.1.4" REFERENCE "ITU-T G.997.1, paragraph #7.1.4"
DEFVAL { { noDefect } } DEFVAL { { noDefect } }
::= { xdsl2ChannelStatusEntry 14 } ::= { xdsl2ChannelStatusEntry 13 }
xdsl2ChStatusPtmStatus OBJECT-TYPE xdsl2ChStatusPtmStatus OBJECT-TYPE
SYNTAX Xdsl2ChPtmStatus SYNTAX Xdsl2ChPtmStatus
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates current state (existing failures) of the DSL "Indicates current state (existing failures) of the DSL
channel in case its Data Path is PTM (Packet Transfer Mode). channel in case its Data Path is PTM (Packet Transfer Mode).
This is a bit-map of possible conditions. The various bit This is a bit-map of possible conditions. The various bit
positions are: positions are:
noDefect (0), noDefect (0),
outOfSync (1). outOfSync (1).
In case the channel is not of PTM Data Path the object is set In case the channel is not of PTM Data Path the object is set
to '0'." to '0'."
REFERENCE "ITU-T G.997.1, paragraph #7.1.5" REFERENCE "ITU-T G.997.1, paragraph #7.1.5"
DEFVAL { { noDefect } } DEFVAL { { noDefect } }
::= { xdsl2ChannelStatusEntry 15 } ::= { xdsl2ChannelStatusEntry 14 }
------------------------------------------------ ------------------------------------------------
-- Scalars that relate to the SC Status Tables -- Scalars that relate to the SC Status Tables
------------------------------------------------ ------------------------------------------------
xdsl2ScalarSCMaxInterfaces OBJECT-TYPE xdsl2ScalarSCMaxInterfaces OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
skipping to change at page 95, line 8 skipping to change at page 101, line 25
When a row is created in this table, the SNMP agent should When a row is created in this table, the SNMP agent should
also create corresponding rows in the tables also create corresponding rows in the tables
xdsl2SCStatusBandTable and xdsl2SCStatusSegmentTable. xdsl2SCStatusBandTable and xdsl2SCStatusSegmentTable.
When a row is deleted in this table, the SNMP agent should When a row is deleted in this table, the SNMP agent should
also delete corresponding rows in the tables also delete corresponding rows in the tables
xdsl2SCStatusBandTable and xdsl2SCStatusSegmentTable. xdsl2SCStatusBandTable and xdsl2SCStatusSegmentTable.
The SNMP agent may have limited resources; therefore, if The SNMP agent may have limited resources; therefore, if
multiple rows co-exist in this table, it may fail to add multiple rows co-exist in this table, it may fail to add
new rows to this table or allocate memory resources for new rows to this table or allocate memory resources for
a new DELT process. If that occurs, the SNMP agent responds with a new DELT process. If that occurs, the SNMP agent responds
either the value 'tableFull' or the value with either the value 'tableFull' or the value
'noResources' (for xdsl2LineCmndConfLdsfFailReason 'noResources' (for xdsl2LineCmndConfLdsfFailReason
object in xdsl2LineTable) object in xdsl2LineTable)
The management system (the operator) may delete rows from this The management system (the operator) may delete rows from this
table according to any scheme. table according to any scheme.
E.g., after retrieving the results." E.g., after retrieving the results."
::= { xdsl2SCStatusEntry 11 } ::= { xdsl2SCStatusEntry 11 }
------------------------------------------------ ------------------------------------------------
-- xdsl2SCStatusBandTable -- -- xdsl2SCStatusBandTable --
------------------------------------------------ ------------------------------------------------
skipping to change at page 98, line 10 skipping to change at page 104, line 28
xdsl2SCStatusSegmentEntry OBJECT-TYPE xdsl2SCStatusSegmentEntry OBJECT-TYPE
SYNTAX Xdsl2SCStatusSegmentEntry SYNTAX Xdsl2SCStatusSegmentEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table xdsl2SCStatusSegmentEntry contains status "The table xdsl2SCStatusSegmentEntry contains status
parameters parameters
of VDSL2/ADSL/ADSL2 and ADSL2+ sub-carriers. of VDSL2/ADSL/ADSL2 and ADSL2+ sub-carriers.
Several objects in the table refer to NSus and NSds. For Several objects in the table refer to NSus and NSds. For
G.993.2, the value of NSus and NSds are respectively the indices G.993.2, the value of NSus and NSds are respectively the
of the highest supported upstream and downstream subcarriers indices of the highest supported upstream and downstream sub-
according to the selected implementation profile. For ADSL, carriers according to the selected implementation profile. For
NSus is equal to NSCus-1 and NSds is equal to NSCds-1. ADSL, NSus is equal to NSCus-1 and NSds is equal to NSCds-1.
One index of this table is an interface index where the One index of this table is an interface index where the
interface has an ifType of vdsl2(xxx). A second index of this interface has an ifType of vdsl2(xxx). A second index of this
table is the transmission direction. A third index identifies table is the transmission direction. A third index identifies
the specific segment of the sub-carriers status addressed." the specific segment of the sub-carriers status addressed."
INDEX { ifIndex, INDEX { ifIndex,
xdsl2SCStatusDirection, xdsl2SCStatusDirection,
xdsl2SCStatusSegment } xdsl2SCStatusSegment }
::= { xdsl2SCStatusSegmentTable 1 } ::= { xdsl2SCStatusSegmentTable 1 }
Xdsl2SCStatusSegmentEntry ::= Xdsl2SCStatusSegmentEntry ::=
SEQUENCE { SEQUENCE {
xdsl2SCStatusSegment Unsigned32, xdsl2SCStatusSegment Unsigned32,
xdsl2SCStatusSegmentLinReal OCTET STRING, xdsl2SCStatusSegmentLinReal OCTET STRING,
xdsl2SCStatusSegmentLinImg OCTET STRING, xdsl2SCStatusSegmentLinImg OCTET STRING,
xdsl2SCStatusSegmentLog OCTET STRING, xdsl2SCStatusSegmentLog OCTET STRING,
xdsl2SCStatusSegmentQln OCTET STRING, xdsl2SCStatusSegmentQln OCTET STRING,
xdsl2SCStatusSegmentSnr OCTET STRING, xdsl2SCStatusSegmentSnr OCTET STRING,
xdsl2SCStatusSegmentBitsAlloc Xdsl2BitsAlloc, xdsl2SCStatusSegmentBitsAlloc Xdsl2BitsAlloc,
xdsl2SCStatusSegmentGainAlloc OCTET STRING, xdsl2SCStatusSegmentGainAlloc OCTET STRING
xdsl2SCStatusSegmentTssi Xdsl2Tssi
} }
xdsl2SCStatusSegment OBJECT-TYPE xdsl2SCStatusSegment OBJECT-TYPE
SYNTAX Unsigned32(1..8) SYNTAX Unsigned32(1..8)
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The segment of the sub-carriers "The segment of the sub-carriers
status information provided by this status information provided by this
row. row.
skipping to change at page 100, line 8 skipping to change at page 106, line 25
direction. It is designed to support up to 512 (downstream) direction. It is designed to support up to 512 (downstream)
sub-carriers groups and can be retrieved in a single segment. sub-carriers groups and can be retrieved in a single segment.
The number of utilized values on downstream direction depends The number of utilized values on downstream direction depends
on NSds, and on upstream direction it depends on NSus. This on NSds, and on upstream direction it depends on NSus. This
value is referred here as NS. value is referred here as NS.
Each array entry represents the imaginary component [referred Each array entry represents the imaginary component [referred
here as b(i)] of Hlin(f = i*Df) value for a particular sub- here as b(i)] of Hlin(f = i*Df) value for a particular sub-
carrier group index i (0 <= i < NS). carrier group index i (0 <= i < NS).
Hlin(f) is represented as ((scale/2^15)*((a(i)+j*b(i))/2^15)), Hlin(f) is represented as ((scale/2^15)*((a(i)+j*b(i))/2^15)),
where scale is xdsl2SCStatusLinScale and a(i) [provided by where scale is xdsl2SCStatusLinScale and a(i) [provided by
the xdsl2SCStatusSegmentLinReal object] and b(i) are in the range the xdsl2SCStatusSegmentLinReal object] and b(i) are in the
(-2^15+1) to (+2^15-1). range (-2^15+1) to (+2^15-1).
A special value a(i)=b(i)= -2^15 indicates that no measurement A special value a(i)=b(i)= -2^15 indicates that no measurement
could be done for the sub-carriers group because it is out of could be done for the sub-carriers group because it is out of
the passband or that the attenuation is out of range to be the passband or that the attenuation is out of range to be
represented. This parameter is only available after a loop represented. This parameter is only available after a loop
diagnostic procedure. diagnostic procedure.
Each value in this array is 16 bits wide and is stored in big Each value in this array is 16 bits wide and is stored in big
endian format." endian format."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.26.3 (HLINpsds) REFERENCE "ITU-T G.997.1, paragraph #7.5.1.26.3 (HLINpsds)
and paragraph #7.5.1.26.9 (HLINpsus)" and paragraph #7.5.1.26.9 (HLINpsus)"
::= { xdsl2SCStatusSegmentEntry 3 } ::= { xdsl2SCStatusSegmentEntry 3 }
skipping to change at page 101, line 42 skipping to change at page 108, line 11
"The SNR Margin per sub-carrier group, expressing the "The SNR Margin per sub-carrier group, expressing the
ratio between the received signal power and received noise ratio between the received signal power and received noise
power per sub-scriber group. It is an array of 512 octets, power per sub-scriber group. It is an array of 512 octets,
designed for supporting up to 512 (downstream) sub-carriers designed for supporting up to 512 (downstream) sub-carriers
groups and can be retrieved in a single segment. groups and can be retrieved in a single segment.
The number of utilized octets on downstream direction depends The number of utilized octets on downstream direction depends
on NSds, and on upstream direction it depends on NSus. This on NSds, and on upstream direction it depends on NSus. This
value is referred here as NS. value is referred here as NS.
Octet i (0 <= i < NS) is set to a value in the range 0 to Octet i (0 <= i < NS) is set to a value in the range 0 to
254 to indicate that the respective downstream or upstream sub- 254 to indicate that the respective downstream or upstream sub-
carrier group i has SNR of: (-32 + xdsl2SCStatusSegmentSnr(i)/2) carrier group i has SNR of:
in dB (i.e., -32 to 95dB). (-32 + xdsl2SCStatusSegmentSnr(i)/2) in dB (i.e., -32 to 95dB).
The special value 255 means that no measurement could be done The special value 255 means that no measurement could be done
for the sub-carrier group because it is out of the PSD mask for the sub-carrier group because it is out of the PSD mask
passband or that the noise PSD is out of range to be passband or that the noise PSD is out of range to be
represented. Each value in this array is 8 bits wide." represented. Each value in this array is 8 bits wide."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.28.3 (SNRpsds) REFERENCE "ITU-T G.997.1, paragraph #7.5.1.28.3 (SNRpsds)
and paragraph #7.5.1.28.6 (SNRpsus)" and paragraph #7.5.1.28.6 (SNRpsus)"
::= { xdsl2SCStatusSegmentEntry 6 } ::= { xdsl2SCStatusSegmentEntry 6 }
xdsl2SCStatusSegmentBitsAlloc OBJECT-TYPE xdsl2SCStatusSegmentBitsAlloc OBJECT-TYPE
SYNTAX Xdsl2BitsAlloc SYNTAX Xdsl2BitsAlloc
skipping to change at page 102, line 18 skipping to change at page 108, line 34
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The bits allocation per sub-carrier. An array of 256 octets "The bits allocation per sub-carrier. An array of 256 octets
(512 nibbles), designed for supporting up to 512 (downstream) (512 nibbles), designed for supporting up to 512 (downstream)
sub-carriers. When more then 512 sub-carriers are supported, sub-carriers. When more then 512 sub-carriers are supported,
the status information is reported through multiple (up to 8) the status information is reported through multiple (up to 8)
segments. The first segment is then used for the first 512 segments. The first segment is then used for the first 512
sub-carriers. The second segment is used for the sub-carriers sub-carriers. The second segment is used for the sub-carriers
512 to 1023 and so on. 512 to 1023 and so on.
The aggregate number of utilized nibbles on downstream direction The aggregate number of utilized nibbles on downstream
(in all segments) depends on NSds, and on upstream direction it direction (in all segments) depends on NSds, and on upstream
depends on NSus. direction it depends on NSus.
This value is referred here as NS. The segment number is in This value is referred here as NS. The segment number is in
xdsl2SCStatusSegment. xdsl2SCStatusSegment.
Nibble i (0 <= i < MIN(NS-(segment-1)*512,512)) in each Nibble i (0 <= i < MIN(NS-(segment-1)*512,512)) in each
segment is set to a value in the range 0 to 15 to indicate that segment is set to a value in the range 0 to 15 to indicate that
the respective downstream or upstream sub-carrier j the respective downstream or upstream sub-carrier j
(j=(segement-1)*512+i) has the same amount of bits (j=(segement-1)*512+i) has the same amount of bits
allocation." allocation."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.29.1 (BITSpsds) REFERENCE "ITU-T G.997.1, paragraph #7.5.1.29.1 (BITSpsds)
and paragraph #7.5.1.29.2 (BITSpsus)" and paragraph #7.5.1.29.2 (BITSpsus)"
::= { xdsl2SCStatusSegmentEntry 7 } ::= { xdsl2SCStatusSegmentEntry 7 }
skipping to change at page 103, line 10 skipping to change at page 109, line 27
segment is set to a value in the range 0 to 4093 to indicate segment is set to a value in the range 0 to 4093 to indicate
that the respective downstream or upstream sub-carrier j that the respective downstream or upstream sub-carrier j
(j=(segement-1)*512+i) has the same amount of gain value. (j=(segement-1)*512+i) has the same amount of gain value.
The gain value is represented as a multiple of 1/512 on The gain value is represented as a multiple of 1/512 on
linear scale. Each value in this array is 16 bits wide and is linear scale. Each value in this array is 16 bits wide and is
stored in big endian format." stored in big endian format."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.29.3 (GAINSpsds) REFERENCE "ITU-T G.997.1, paragraph #7.5.1.29.3 (GAINSpsds)
and paragraph #7.5.1.29.4 (GAINSpsus)" and paragraph #7.5.1.29.4 (GAINSpsus)"
::= { xdsl2SCStatusSegmentEntry 8 } ::= { xdsl2SCStatusSegmentEntry 8 }
xdsl2SCStatusSegmentTssi OBJECT-TYPE
SYNTAX Xdsl2Tssi
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"The transmit spectrum shaping (TSSi) breakpoints expressed
as the set of breakpoints exchanged during G.994.1.
Each breakpoint is a pair of values occupying 3 octets with the
following structure:
First 2 octets - Index of the subcarrier used in the context of
the breakpoint.
Third octet - The shaping parameter at the breakpoint.
Subcarrier index is an unsigned number in the range 1 to either
NSCds (downstream direction) or NSCus (upstream direction).
The shaping parameter value is in the range 0 to 127 (units of
-0.5dB). The special value 127 indicates that the subcarrier
is not transmitted."
REFERENCE "ITU-T G.997.1, paragraph #7.5.1.29.5 (TSSpsds)
and paragraph #7.5.1.29.6 (TSSpsus)"
::= { xdsl2SCStatusSegmentEntry 9 }
------------------------------------------------ ------------------------------------------------
-- xdsl2LineInventoryTable -- -- xdsl2LineInventoryTable --
------------------------------------------------ ------------------------------------------------
xdsl2LineInventoryTable OBJECT-TYPE xdsl2LineInventoryTable OBJECT-TYPE
SYNTAX SEQUENCE OF Xdsl2LineInventoryEntry SYNTAX SEQUENCE OF Xdsl2LineInventoryEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table xdsl2LineInventoryTable contains inventory of the "The table xdsl2LineInventoryTable contains inventory of the
DSL termination unit. " DSL termination unit. "
skipping to change at page 104, line 35 skipping to change at page 110, line 32
xdsl2LInvG994VendorId OBJECT-TYPE xdsl2LInvG994VendorId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(8)) SYNTAX OCTET STRING (SIZE(8))
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The ATU G.994.1 Vendor ID as inserted in the G.994.1 CL/CLR "The ATU G.994.1 Vendor ID as inserted in the G.994.1 CL/CLR
message. It consists of 8 binary octets, including a country message. It consists of 8 binary octets, including a country
code followed by a (regionally allocated) provider code, as code followed by a (regionally allocated) provider code, as
defined in Recommendation T.35." defined in Recommendation T.35."
REFERENCE "ITU-T G.997.1, paragraph #7.4" REFERENCE "ITU-T G.997.1, paragraph #7.4.1-7.4.2"
::= { xdsl2LineInventoryEntry 2 } ::= { xdsl2LineInventoryEntry 2 }
xdsl2LInvSystemVendorId OBJECT-TYPE xdsl2LInvSystemVendorId OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(8)) SYNTAX OCTET STRING (SIZE(8))
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The ATU System Vendor ID (identifies the XTU system "The ATU System Vendor ID (identifies the XTU system
integrator) as inserted in the Overhead Messages (both XTUs integrator) as inserted in the Overhead Messages (both XTUs
for G.992.3 and G.992.4) or in the Embedded Operations for G.992.3, G.992.4, G.992.5 and G.993.2) or in the
Channel (only XTU-R in G.992.1 and G.992.2). It consists of Embedded Operations Channel (XTU-R in G.992.1 and G.992.2).
8 binary octets, with same format as used for It consists of 8 binary octets, with same format as used for
Xdsl2InvG994VendorId." Xdsl2InvG994VendorId."
REFERENCE "ITU-T G.997.1, paragraph #7.4" REFERENCE "ITU-T G.997.1, paragraph #7.4.3-7.4.4"
::= { xdsl2LineInventoryEntry 3 } ::= { xdsl2LineInventoryEntry 3 }
xdsl2LInvVersionNumber OBJECT-TYPE xdsl2LInvVersionNumber OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..16)) SYNTAX OCTET STRING (SIZE(0..16))
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The XTU version number (vendor specific information) as "The XTU version number (vendor specific information) as
inserted in the Overhead Messages (both XTUs for G.992.3 and inserted in the Overhead Messages (both XTUs for G.992.3,
G.992.4) or in the Embedded Operations Channel (only XTU-R in G.992.4, G.992.5 and G.993.2) or in the Embedded Operations
G.992.1 and G.992.2). It consists of up to 16 binary Channel (XTU-R in G.992.1 and G.992.2). It consists of up
octets." to 16 binary octets."
REFERENCE "ITU-T G.997.1, paragraph #7.4" REFERENCE "ITU-T G.997.1, paragraph #7.4.5-7.4.6"
::= { xdsl2LineInventoryEntry 4 } ::= { xdsl2LineInventoryEntry 4 }
xdsl2LInvSerialNumber OBJECT-TYPE xdsl2LInvSerialNumber OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..32)) SYNTAX OCTET STRING (SIZE(0..32))
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The XTU serial number (vendor specific information) as "The XTU serial number (vendor specific information) as
inserted in the Overhead Messages (both XTUs for G.992.3 and inserted in the Overhead Messages (both XTUs for G.992.3,
G.992.4) or in the Embedded Operations Channel (only XTU-R in G.992.4, G.992.5 and G.993.2) or in the Embedded Operations
G.992.1 and G.992.2). It is vendor specific information. It Channel (XTU-R in G.992.1 and G.992.2). It is vendor
consists of up to 32 ASCII characters." specific information consisting of up to 32 ASCII characters."
REFERENCE "ITU-T G.997.1, paragraph #7.4" REFERENCE "ITU-T G.997.1, paragraph #7.4.7-7.4.8"
::= { xdsl2LineInventoryEntry 5 } ::= { xdsl2LineInventoryEntry 5 }
xdsl2LInvSelfTestResult OBJECT-TYPE xdsl2LInvSelfTestResult OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The XTU self-test result, coded as a 32-bit value. The "The XTU self-test result, coded as a 32-bit value. The
most significant octet of the result is '0' if the most significant octet of the result is '0' if the
self-test self-test
passed, and '1' if the self-test failed. The passed, and '1' if the self-test failed. The
interpretation interpretation
of the other octets is vendor discretionary." of the other octets is vendor discretionary."
REFERENCE "ITU-T G.997.1, paragraph #7.4" REFERENCE "ITU-T G.997.1, paragraph #7.4.9-7.4.10"
DEFVAL { 0 } DEFVAL { 0 }
::= { xdsl2LineInventoryEntry 6 } ::= { xdsl2LineInventoryEntry 6 }
xdsl2LInvTransmissionCapabilities OBJECT-TYPE xdsl2LInvTransmissionCapabilities OBJECT-TYPE
SYNTAX Xdsl2TransmissionModeType SYNTAX Xdsl2TransmissionModeType
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The XTU transmission system capability list of the different "The XTU transmission system capability list of the different
coding types. It is coded in a bit-map representation with 1 coding types. It is coded in a bit-map representation with 1
or more bits set. A bit set to '1' means that the XTU or more bits set. A bit set to '1' means that the XTU
supports the respective coding. The value may be derived supports the respective coding. The value may be derived
from the handshaking procedures defined in G.994.1. A set from the handshaking procedures defined in G.994.1. A set
of xDSL line transmission modes, with one bit per mode." of xDSL line transmission modes, with one bit per mode."
REFERENCE "ITU-T G.997.1, paragraph #7.4" REFERENCE "ITU-T G.997.1, paragraph #7.4.11-7.4.12"
::= { xdsl2LineInventoryEntry 7 } ::= { xdsl2LineInventoryEntry 7 }
------------------------------------------------ ------------------------------------------------
-- xdsl2LineConfTemplateTable -- -- xdsl2LineConfTemplateTable --
------------------------------------------------ ------------------------------------------------
xdsl2LineConfTemplateTable OBJECT-TYPE xdsl2LineConfTemplateTable OBJECT-TYPE
SYNTAX SEQUENCE OF Xdsl2LineConfTemplateEntry SYNTAX SEQUENCE OF Xdsl2LineConfTemplateEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table xdsl2LineConfTemplateTable contains VDSL2/ADSL/ "The table xdsl2LineConfTemplateTable contains VDSL2/ADSL/
ADSL2 and ADSL2+ line configuration template. ADSL2 and ADSL2+ line configuration template.
Note that this table is also used to configure the number of Note that this table is also used to configure the number of
bearer channels. bearer channels.
When the number of bearer channels is increased, the SNMP agent When the number of bearer channels is increased, the SNMP
SHOULD create rows in all tables indexed by a channel index. agent SHOULD create rows in all tables indexed by a channel
When the number of bearer channels is decreased, the SNMP agent index. When the number of bearer channels is decreased, the
SHOULD delete rows in all tables indexed by a channel index. SNMP agent SHOULD delete rows in all tables indexed by a
channel index.
For example, if the value of xdsl2LConfTempChan4ConfProfile is For example, if the value of xdsl2LConfTempChan4ConfProfile is
set to a non null value then rows SHOULD be created in set to a non null value then rows SHOULD be created in
xdsl2ChannelStatusTable, xdsl2PMChCurrTable, and all other xdsl2ChannelStatusTable, xdsl2PMChCurrTable, and all other
tables indexed by a channel index. tables indexed by a channel index.
For example, if the value of xdsl2LConfTempChan2ConfProfile is For example, if the value of xdsl2LConfTempChan2ConfProfile is
set to a null value then rows SHOULD be deleted in set to a null value then rows SHOULD be deleted in
xdsl2ChannelStatusTable, xdsl2PMChCurrTable, and all other xdsl2ChannelStatusTable, xdsl2PMChCurrTable, and all other
tables indexed by a channel index. tables indexed by a channel index.
Entries in this table MUST be maintained in a Entries in this table MUST be maintained in a
skipping to change at page 108, line 24 skipping to change at page 114, line 22
DEFVAL { "DEFVAL" } DEFVAL { "DEFVAL" }
::= { xdsl2LineConfTemplateEntry 3 } ::= { xdsl2LineConfTemplateEntry 3 }
xdsl2LConfTempChan1RaRatioDs OBJECT-TYPE xdsl2LConfTempChan1RaRatioDs OBJECT-TYPE
SYNTAX Unsigned32(0..100) SYNTAX Unsigned32(0..100)
UNITS "percents" UNITS "percents"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Rate Adaptation Ratio. The ratio (in %) that should be "Rate Adaptation Ratio. The ratio (in %) that should be
taken taken into account for the bearer channel #1 when performing
into account for the bearer channel #1 when performing rate rate adaptation on Downstream. The ratio refers to the
adaptation on Downstream. The ratio refers to the available available data rate in excess of the Minimum Data Rate, summed
data rate in excess of the Minimum Data Rate, summed over all over all bearer channels.
bearer channels. Also, the 100 - Also, the 100 - xdsl2LConfTempChan1RaRatioDs is the ratio of
xdsl2LConfTempChan1RaRatioDs is the ratio of excess data excess data rate to be assigned to all other bearer channels
rate to be assigned to all other bearer channels on Downstream on Downstream direction. The sum of rate adaptation ratios
direction. The sum of rate adaptation ratios over all bearers over all bearers on the same direction shall be equal to 100%.
on the same direction shall be equal to 100%." "
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.1" REFERENCE "ITU-T G.997.1, paragraph #7.3.2.1.4"
DEFVAL { 100 } DEFVAL { 100 }
::= { xdsl2LineConfTemplateEntry 4 } ::= { xdsl2LineConfTemplateEntry 4 }
xdsl2LConfTempChan1RaRatioUs OBJECT-TYPE xdsl2LConfTempChan1RaRatioUs OBJECT-TYPE
SYNTAX Unsigned32(0..100) SYNTAX Unsigned32(0..100)
UNITS "percents" UNITS "percents"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Rate Adaptation Ratio. The ratio (in %) that should be "Rate Adaptation Ratio. The ratio (in %) that should be
taken taken into account for the bearer channel #1 when performing
into account for the bearer channel #1 when performing rate rate adaptation on Upstream. The ratio refers to the
adaptation on Upstream. The ratio refers to the available available data rate in excess of the Minimum Data Rate, summed
data rate in excess of the Minimum Data Rate, summed over all over all bearer channels.
bearer channels. Also, the Also, the 100 - xdsl2LConfTempChan1RaRatioUs is the ratio of
100 - xdsl2LConfTempChan1RaRatioUs is the ratio of excess excess data rate to be assigned to all other bearer channels
data rate to be assigned to all other bearer channels on on Upstream direction. The sum of rate adaptation ratios over
Upstream direction. The sum of rate adaptation ratios over
all bearers on the same direction shall be equal to 100 %." all bearers on the same direction shall be equal to 100 %."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.1" REFERENCE "ITU-T G.997.1, paragraph #7.3.2.1.4"
DEFVAL { 100 } DEFVAL { 100 }
::= { xdsl2LineConfTemplateEntry 5 } ::= { xdsl2LineConfTemplateEntry 5 }
xdsl2LConfTempChan2ConfProfile OBJECT-TYPE xdsl2LConfTempChan2ConfProfile OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..32)) SYNTAX SnmpAdminString (SIZE(0..32))
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The value of this object identifies the row in the "The value of this object identifies the row in the
VDSL2/ADSL/ VDSL2/ADSL/
skipping to change at page 109, line 34 skipping to change at page 115, line 31
DEFVAL { "" } DEFVAL { "" }
::= { xdsl2LineConfTemplateEntry 6 } ::= { xdsl2LineConfTemplateEntry 6 }
xdsl2LConfTempChan2RaRatioDs OBJECT-TYPE xdsl2LConfTempChan2RaRatioDs OBJECT-TYPE
SYNTAX Unsigned32(0..100) SYNTAX Unsigned32(0..100)
UNITS "percents" UNITS "percents"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Rate Adaptation Ratio. The ratio (in %) that should be "Rate Adaptation Ratio. The ratio (in %) that should be
taken taken into account for the bearer channel #2 when performing
into account for the bearer channel #2 when performing rate rate adaptation on Downstream. The ratio refers to the
adaptation on Downstream. The ratio refers to the available available data rate in excess of the Minimum Data Rate,
data rate in excess of the Minimum Data Rate, summed over all summed over all bearer channels.
bearer channels. Also, the Also, the 100 - xdsl2LConfTempChan2RaRatioDs is the ratio of
100 - xdsl2LConfTempChan2RaRatioDs is the ratio of excess excess data rate to be assigned to all other bearer channels
data rate to be assigned to all other bearer channels on on Downstream direction. The sum of rate adaptation ratios
Downstream direction. The sum of rate adaptation ratios
over all bearers on the same direction shall be equal to over all bearers on the same direction shall be equal to
100%." 100%."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.1" REFERENCE "ITU-T G.997.1, paragraph #7.3.2.1.4"
DEFVAL { 0 } DEFVAL { 0 }
::= { xdsl2LineConfTemplateEntry 7 } ::= { xdsl2LineConfTemplateEntry 7 }
xdsl2LConfTempChan2RaRatioUs OBJECT-TYPE xdsl2LConfTempChan2RaRatioUs OBJECT-TYPE
SYNTAX Unsigned32(0..100) SYNTAX Unsigned32(0..100)
UNITS "percents" UNITS "percents"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Rate Adaptation Ratio. The ratio (in %) that should be "Rate Adaptation Ratio. The ratio (in %) that should be
taken taken into account for the bearer channel #2 when performing
into account for the bearer channel #2 when performing rate rate adaptation on Upstream. The ratio refers to the
adaptation on Upstream. The ratio refers to the available available data rate in excess of the Minimum Data Rate,
data rate in excess of the Minimum Data Rate, summed over all summed over all bearer channels.
bearer channels. Also, the Also, the 100 - xdsl2LConfTempChan2RaRatioUs is the ratio of
100 - xdsl2LConfTempChan2RaRatioUs is the ratio of excess excess data rate to be assigned to all other bearer channels
data rate to be assigned to all other bearer channels on on Upstream direction. The sum of rate adaptation ratios over
Upstream direction. The sum of rate adaptation ratios over
all bearers on the same direction shall be equal to 100 %." all bearers on the same direction shall be equal to 100 %."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.1" REFERENCE "ITU-T G.997.1, paragraph #7.3.2.1.4"
DEFVAL { 0 } DEFVAL { 0 }
::= { xdsl2LineConfTemplateEntry 8 } ::= { xdsl2LineConfTemplateEntry 8 }
xdsl2LConfTempChan3ConfProfile OBJECT-TYPE xdsl2LConfTempChan3ConfProfile OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..32)) SYNTAX SnmpAdminString (SIZE(0..32))
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The value of this object identifies the row in the "The value of this object identifies the row in the
VDSL2/ADSL/ VDSL2/ADSL/
skipping to change at page 110, line 47 skipping to change at page 116, line 42
DEFVAL { "" } DEFVAL { "" }
::= { xdsl2LineConfTemplateEntry 9 } ::= { xdsl2LineConfTemplateEntry 9 }
xdsl2LConfTempChan3RaRatioDs OBJECT-TYPE xdsl2LConfTempChan3RaRatioDs OBJECT-TYPE
SYNTAX Unsigned32(0..100) SYNTAX Unsigned32(0..100)
UNITS "percents" UNITS "percents"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Rate Adaptation Ratio. The ratio (in %) that should be "Rate Adaptation Ratio. The ratio (in %) that should be
taken taken into account for the bearer channel #3 when performing
into account for the bearer channel #3 when performing rate rate adaptation on Downstream. The ratio refers to the
adaptation on Downstream. The ratio refers to the available available data rate in excess of the Minimum Data Rate,
data rate in excess of the Minimum Data Rate, summed over all summed over all bearer channels.
bearer channels. Also, the 100 - Also, the 100 - xdsl2LConfTempChan3RaRatioDs is the ratio of
xdsl2LConfTempChan3RaRatioDs is the ratio of excess data excess data rate to be assigned to all other bearer channels
rate to be assigned to all other bearer channels on Downstream on Downstream direction. The sum of rate adaptation ratios
direction. The sum of rate adaptation ratios over all bearers over all bearers on the same direction shall be equal to 100%.
on the same direction shall be equal to 100%." "
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.1" REFERENCE "ITU-T G.997.1, paragraph #7.3.2.1.4"
DEFVAL { 0 } DEFVAL { 0 }
::= { xdsl2LineConfTemplateEntry 10 } ::= { xdsl2LineConfTemplateEntry 10 }
xdsl2LConfTempChan3RaRatioUs OBJECT-TYPE xdsl2LConfTempChan3RaRatioUs OBJECT-TYPE
SYNTAX Unsigned32(0..100) SYNTAX Unsigned32(0..100)
UNITS "percents" UNITS "percents"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Rate Adaptation Ratio. The ratio (in %) that should be "Rate Adaptation Ratio. The ratio (in %) that should be
taken taken into account for the bearer channel #3 when performing
into account for the bearer channel #3 when performing rate rate adaptation on Upstream. The ratio refers to the
adaptation on Upstream. The ratio refers to the available available data rate in excess of the Minimum Data Rate,
data rate in excess of the Minimum Data Rate, summed over all summed over all bearer channels.
bearer channels. Also, the Also, the 100 - xdsl2LConfTempChan3RaRatioUs is the ratio of
100 - xdsl2LConfTempChan3RaRatioUs is the ratio of excess excess data rate to be assigned to all other bearer channels
data rate to be assigned to all other bearer channels on on Upstream direction. The sum of rate adaptation ratios over
Upstream direction. The sum of rate adaptation ratios over
all bearers on the same direction shall be equal to 100%." all bearers on the same direction shall be equal to 100%."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.1" REFERENCE "ITU-T G.997.1, paragraph #7.3.2.1.4"
DEFVAL { 0 } DEFVAL { 0 }
::= { xdsl2LineConfTemplateEntry 11 } ::= { xdsl2LineConfTemplateEntry 11 }
xdsl2LConfTempChan4ConfProfile OBJECT-TYPE xdsl2LConfTempChan4ConfProfile OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(0..32)) SYNTAX SnmpAdminString (SIZE(0..32))
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The value of this object identifies the row in the "The value of this object identifies the row in the
VDSL2/ADSL/ VDSL2/ADSL/
skipping to change at page 112, line 12 skipping to change at page 118, line 6
SYNTAX Unsigned32(0..100) SYNTAX Unsigned32(0..100)
UNITS "percents" UNITS "percents"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Rate Adaptation Ratio. The ratio (in %) that should be "Rate Adaptation Ratio. The ratio (in %) that should be
taken taken
into account for the bearer channel #4 when performing rate into account for the bearer channel #4 when performing rate
adaptation on Downstream. The ratio refers to the available adaptation on Downstream. The ratio refers to the available
data rate in excess of the Minimum Data Rate, summed over all data rate in excess of the Minimum Data Rate, summed over all
bearer channels. Also, the 100 - bearer channels.
Also, the 100 - xdsl2LConfTempChan4RaRatioDs is the ratio of
xdsl2LConfTempChan4RaRatioDs is the ratio of
excess data rate to be assigned to all other bearer channels. excess data rate to be assigned to all other bearer channels.
The sum of rate adaptation ratios over all bearers on the same The sum of rate adaptation ratios over all bearers on the same
direction shall sum to 100%." direction shall sum to 100%."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.1" REFERENCE "ITU-T G.997.1, paragraph #7.3.2.1.4"
DEFVAL { 0 } DEFVAL { 0 }
::= { xdsl2LineConfTemplateEntry 13 } ::= { xdsl2LineConfTemplateEntry 13 }
xdsl2LConfTempChan4RaRatioUs OBJECT-TYPE xdsl2LConfTempChan4RaRatioUs OBJECT-TYPE
SYNTAX Unsigned32(0..100) SYNTAX Unsigned32(0..100)
UNITS "percents" UNITS "percents"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Rate Adaptation Ratio. The ratio (in %) that should be "Rate Adaptation Ratio. The ratio (in %) that should be
taken taken
into account for the bearer channel #4 when performing rate into account for the bearer channel #4 when performing rate
adaptation on Upstream. The ratio refers to the available adaptation on Upstream. The ratio refers to the available
data rate in excess of the Minimum Data Rate, summed over data rate in excess of the Minimum Data Rate, summed over
all bearer channels. Also, the 100 - all bearer channels.
Also, the 100 - xdsl2LConfTempChan4RaRatioUs is the ratio of
xdsl2LConfTempChan4RaRatioUs is the excess data rate to be assigned to all other bearer
ratio of excess data rate to be assigned to all other bearer
channels. The sum of rate adaptation ratios over all bearers channels. The sum of rate adaptation ratios over all bearers
on the same direction shall sum to 100%." on the same direction shall sum to 100%."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.1" REFERENCE "ITU-T G.997.1, paragraph #7.3.2.1.4"
DEFVAL { 0 } DEFVAL { 0 }
::= { xdsl2LineConfTemplateEntry 14 } ::= { xdsl2LineConfTemplateEntry 14 }
xdsl2LConfTempRowStatus OBJECT-TYPE xdsl2LConfTempRowStatus OBJECT-TYPE
SYNTAX RowStatus SYNTAX RowStatus
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object is used to create a new row or to modify or "This object is used to create a new row or to modify or
delete an existing row in this table. delete an existing row in this table.
skipping to change at page 116, line 30 skipping to change at page 122, line 21
xdsl2LConfProfRfiBands OBJECT-TYPE xdsl2LConfProfRfiBands OBJECT-TYPE
SYNTAX Xdsl2RfiBands SYNTAX Xdsl2RfiBands
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"(RFIBANDS). "(RFIBANDS).
For ITU-T Rec. G.992.5, this configuration parameter defines For ITU-T Rec. G.992.5, this configuration parameter defines
the subset of downstream PSD mask breakpoints, as specified the subset of downstream PSD mask breakpoints, as specified
in xdsl2LConfProfPsdMaskDs (PSDMASKds), that shall be used to in xdsl2LConfProfPsdMaskDs (PSDMASKds), that shall be used to
notch an RFI band. This subset consists of couples of consecutive notch an RFI band. This subset consists of couples of
subcarrier indices belonging to breakpoints: [ti; ti + 1], consecutive subcarrier indices belonging to breakpoints:
corresponding to the low level of the notch. The specific [ti; ti + 1], corresponding to the low level of the notch.
interpolation around The specific interpolation around these points is defined in
these points is defined in the relevant Recommendations the relevant Recommendations (e.g., ITU-T Rec. G.992.5).
(e.g., ITU-T Rec. G.992.5). The CO-MIB shall define the RFI The CO-MIB shall define the RFI notches using breakpoints in
notches using breakpoints in xdsl2LConfProfPsdMaskDs (PSDMASKds) xdsl2LConfProfPsdMaskDs (PSDMASKds) as specified in the
as specified in the relevant Recommendations (e.g., ITU-T Rec. relevant Recommendations (e.g., ITU-T Rec. G.992.5).
G.992.5).
For ITU-T Rec. G.993.2, this configuration parameter defines the For ITU-T Rec. G.993.2, this configuration parameter defines
bands where the PSD shall be reduced as specified in the bands where the PSD shall be reduced as specified in
#7.2.1.2/G.993.2. Each band shall be represented by a start and #7.2.1.2/G.993.2. Each band shall be represented by a start and
stop subcarrier indices with a subcarrier spacing stop subcarrier indices with a subcarrier spacing
of 4.3125 kHz. Up to 16 bands may be specified. This parameter of 4.3125 kHz. Up to 16 bands may be specified. This parameter
defines the RFI bands for both upstream and downstream defines the RFI bands for both upstream and downstream
directions." directions."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.10" REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.10"
::= { xdsl2LineConfProfEntry 5 } ::= { xdsl2LineConfProfEntry 5 }
xdsl2LConfProfRaModeDs OBJECT-TYPE xdsl2LConfProfRaModeDs OBJECT-TYPE
SYNTAX Xdsl2RaMode SYNTAX Xdsl2RaMode
skipping to change at page 122, line 43 skipping to change at page 128, line 33
loss-of-margin (LOM) defect occurs, the xTU-C shall fail and loss-of-margin (LOM) defect occurs, the xTU-C shall fail and
attempt to re-initialize and the NMS shall be notified. The attempt to re-initialize and the NMS shall be notified. The
minimum noise margin ranges from 0 to 310 units of minimum noise margin ranges from 0 to 310 units of
0.1 dB (Physical values are 0 to 31 dB). A value of 0 means 0.1 dB (Physical values are 0 to 31 dB). A value of 0 means
that there is no minimum." that there is no minimum."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.3.6" REFERENCE "ITU-T G.997.1, paragraph #7.3.1.3.6"
DEFVAL { 10 } DEFVAL { 10 }
::= { xdsl2LineConfProfEntry 21 } ::= { xdsl2LineConfProfEntry 21 }
xdsl2LConfProfMsgMinUs OBJECT-TYPE xdsl2LConfProfMsgMinUs OBJECT-TYPE
SYNTAX Unsigned32(4000..63000) SYNTAX Unsigned32(4000..248000)
UNITS "bits/second" UNITS "bits/second"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"(MSGMINus). "(MSGMINus).
Minimum Overhead Rate Upstream. Defines the minimum rate of Minimum Overhead Rate Upstream. Defines the minimum rate of
the message-based overhead that shall be maintained by the xTU the message-based overhead that shall be maintained by the xTU
in upstream direction. Expressed in bits per second and in upstream direction. Expressed in bits per second and
ranges from 4000 to 63000 bps." ranges from 4000 to 248000 bps."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.5.1" REFERENCE "ITU-T G.997.1, paragraph #7.3.1.5.1"
DEFVAL { 4000 } DEFVAL { 4000 }
::= { xdsl2LineConfProfEntry 22 } ::= { xdsl2LineConfProfEntry 22 }
xdsl2LConfProfMsgMinDs OBJECT-TYPE xdsl2LConfProfMsgMinDs OBJECT-TYPE
SYNTAX Unsigned32(4000..63000) SYNTAX Unsigned32(4000..248000)
UNITS "bits/second" UNITS "bits/second"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"(MSGMINds). "(MSGMINds).
Minimum Overhead Rate Downstream. Defines the minimum rate of Minimum Overhead Rate Downstream. Defines the minimum rate of
the message-based overhead that shall be maintained by the xTU the message-based overhead that shall be maintained by the xTU
in downstream direction. Expressed in bits per second and in downstream direction. Expressed in bits per second and
ranges from 4000 to 63000 bps." ranges from 4000 to 248000 bps."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.5.2" REFERENCE "ITU-T G.997.1, paragraph #7.3.1.5.2"
DEFVAL { 4000 } DEFVAL { 4000 }
::= { xdsl2LineConfProfEntry 23 } ::= { xdsl2LineConfProfEntry 23 }
xdsl2LConfProfCeFlag OBJECT-TYPE xdsl2LConfProfCeFlag OBJECT-TYPE
SYNTAX Xdsl2LineCeFlag SYNTAX Xdsl2LineCeFlag
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"(CEFLAG). "(CEFLAG).
skipping to change at page 124, line 28 skipping to change at page 130, line 18
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This configuration parameter defines the downstream "This configuration parameter defines the downstream
transmitter referred virtual noise (TXREFVNds). transmitter referred virtual noise (TXREFVNds).
The TXREFVNds shall be specified through a set of breakpoints. The TXREFVNds shall be specified through a set of breakpoints.
Each breakpoint shall consist of a subcarrier index t, Each breakpoint shall consist of a subcarrier index t,
with a subcarrier spacing of 4.3125 kHz, and a noise PSD with a subcarrier spacing of 4.3125 kHz, and a noise PSD
level (expressed in dBm/Hz) at that subcarrier. The set of level (expressed in dBm/Hz) at that subcarrier. The set of
breakpoints can then be represented as breakpoints can then be represented as
[(t1,PSD1), (t2, PSD2), ... , (tN, PSDN)]. The subcarrier index [(t1,PSD1), (t2, PSD2), ... , (tN, PSDN)]. The subcarrier
shall be coded as an unsigned integer. The noise level ranges index shall be coded as an unsigned integer. The noise level
from -40 dBm/Hz to -140 dBm/Hz in steps of 0.5 dBm/Hz. ranges from -40 dBm/Hz to -140 dBm/Hz in steps of 0.5 dBm/Hz.
A special value indicates a noise level of 0 W/Hz. A special value indicates a noise level of 0 W/Hz.
The maximum number of breakpoints is 32." The maximum number of breakpoints is 32."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.7.3" REFERENCE "ITU-T G.997.1, paragraph #7.3.1.7.3"
::= { xdsl2LineConfProfEntry 27 } ::= { xdsl2LineConfProfEntry 27 }
xdsl2LConfProfTxRefVnUs OBJECT-TYPE xdsl2LConfProfTxRefVnUs OBJECT-TYPE
SYNTAX Xdsl2LineTxRefVnUs SYNTAX Xdsl2LineTxRefVnUs
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This configuration parameter defines the upstream "This configuration parameter defines the upstream
transmitter referred virtual noise (TXREFVNus). transmitter referred virtual noise (TXREFVNus).
The TXREFVNus shall be specified through a set of breakpoints. The TXREFVNus shall be specified through a set of breakpoints.
Each breakpoint shall consist of a subcarrier index t, Each breakpoint shall consist of a subcarrier index t,
with a subcarrier spacing of 4.3125 kHz, and a noise PSD with a subcarrier spacing of 4.3125 kHz, and a noise PSD
level (expressed in dBm/Hz) at that subcarrier. The set of level (expressed in dBm/Hz) at that subcarrier. The set of
breakpoints can then be represented as breakpoints can then be represented as
[(t1, PSD1), (t2, PSD2), ... , (tN, PSDN)]. The subcarrier index [(t1, PSD1), (t2, PSD2), ... , (tN, PSDN)]. The subcarrier
shall be coded as an unsigned integer. The noise level ranges index shall be coded as an unsigned integer. The noise level
from -40 dBm/Hz to -140 dBm/Hz in steps of 0.5 dBm/Hz. ranges from -40 dBm/Hz to -140 dBm/Hz in steps of 0.5 dBm/Hz.
A special value indicates a noise level of 0 W/Hz. A special value indicates a noise level of 0 W/Hz.
The maximum number of breakpoints is 16." The maximum number of breakpoints is 16."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.7.4" REFERENCE "ITU-T G.997.1, paragraph #7.3.1.7.4"
::= { xdsl2LineConfProfEntry 28 } ::= { xdsl2LineConfProfEntry 28 }
xdsl2LConfProfXtuTransSysEna OBJECT-TYPE xdsl2LConfProfXtuTransSysEna OBJECT-TYPE
SYNTAX Xdsl2TransmissionModeType SYNTAX Xdsl2TransmissionModeType
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"xTU Transmission System Enabling (XTSE). A list of the "xTU Transmission System Enabling (XTSE). A list of the
skipping to change at page 127, line 26 skipping to change at page 133, line 16
::= { xdsl2LineConfProfEntry 35 } ::= { xdsl2LineConfProfEntry 35 }
xdsl2LConfProfDpboEPsd OBJECT-TYPE xdsl2LConfProfDpboEPsd OBJECT-TYPE
SYNTAX Xdsl2PsdMaskDs SYNTAX Xdsl2PsdMaskDs
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"(DPBOEPSD). "(DPBOEPSD).
This configuration parameter defines the PSD mask that This configuration parameter defines the PSD mask that
is assumed to be permitted at the exchange. This parameter is assumed to be permitted at the exchange. This parameter
shall use the same format as xdsl2LConfProfPsdMaskDs (PSDMASKds). shall use the same format as xdsl2LConfProfPsdMaskDs
The maximum number of breakpoints for xdsl2LConfProfDpboEPsd is (PSDMASKds). The maximum number of breakpoints for
16." xdsl2LConfProfDpboEPsd is 16."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.13" REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.13"
::= { xdsl2LineConfProfEntry 36 } ::= { xdsl2LineConfProfEntry 36 }
xdsl2LConfProfDpboEsEL OBJECT-TYPE xdsl2LConfProfDpboEsEL OBJECT-TYPE
SYNTAX Unsigned32 (0..511) SYNTAX Unsigned32 (0..511)
UNITS "0.5 dB" UNITS "0.5 dB"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"(DPBOESEL). "(DPBOESEL).
skipping to change at page 128, line 24 skipping to change at page 134, line 14
DESCRIPTION DESCRIPTION
"(DPBOESCMA). "(DPBOESCMA).
The E-side Cable Model parameter A (DPBOESCMA) of the The E-side Cable Model parameter A (DPBOESCMA) of the
cable model (DPBOESCM) for cables connecting exchange based DSL cable model (DPBOESCM) for cables connecting exchange based DSL
services to a remote flexibility point (cabinet), that hosts services to a remote flexibility point (cabinet), that hosts
the xTU-C that is subject to spectrally shaped downstream the xTU-C that is subject to spectrally shaped downstream
power back-off (DPBO) depending on this value. power back-off (DPBO) depending on this value.
The cable model is in terms of three The cable model is in terms of three
scalars xdsl2LConfProfDpboEsCableModelA (DPBOESCMA), scalars xdsl2LConfProfDpboEsCableModelA (DPBOESCMA),
xdsl2LConfProfDpboEsCableModelB(DPBOESCMB), xdsl2LConfProfDpboEsCableModelB(DPBOESCMB),
and xdsl2LConfProfDpboEsCableModelC (DPBOESCMC), and xdsl2LConfProfDpboEsCableModelC (DPBOESCMC), that
that are used to estimate the frequency dependent loss of E-side are used to estimate the frequency dependent loss of E-side
cables calculated from the xdsl2LConfProfDpboEsEL (DPBOESEL) cables calculated from the xdsl2LConfProfDpboEsEL (DPBOESEL)
parameter. Possible values shall be coded as unsigned integers parameter. Possible values shall be coded as unsigned integers
representing a scalar value from -1 (coded as 0) to representing a scalar value from -1 (coded as 0) to 1.5
1.5 (coded as 640) in steps of 2^-8. All values in the range are (coded as 640) in steps of 2^-8. All values in the range are
valid. This parameter is used only for G.993.2." valid. This parameter is used only for G.993.2."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.13" REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.13"
DEFVAL { 0 } DEFVAL { 0 }
::= { xdsl2LineConfProfEntry 38 } ::= { xdsl2LineConfProfEntry 38 }
xdsl2LConfProfDpboEsCableModelB OBJECT-TYPE xdsl2LConfProfDpboEsCableModelB OBJECT-TYPE
SYNTAX Unsigned32 (0..640) SYNTAX Unsigned32 (0..640)
UNITS "2^-8" UNITS "2^-8"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"(DPBOESCMB). "(DPBOESCMB).
The E-side Cable Model parameter B (DPBOESCMB) of the The E-side Cable Model parameter B (DPBOESCMB) of the
cable model (DPBOESCM) for cables connecting exchange based DSL cable model (DPBOESCM) for cables connecting exchange based DSL
services to a remote flexibility point (cabinet), that hosts services to a remote flexibility point (cabinet), that hosts
the xTU-C that is subject to spectrally shaped downstream the xTU-C that is subject to spectrally shaped downstream
power back-off (DPBO) depending on this value. power back-off (DPBO) depending on this value.
The cable model is in terms of three The cable model is in terms of three
scalars xdsl2LConfProfDpboEsCableModelA (DPBOESCMA), scalars xdsl2LConfProfDpboEsCableModelA (DPBOESCMA),
xdsl2LConfProfDpboEsCableModelB(DPBOESCMB), xdsl2LConfProfDpboEsCableModelB(DPBOESCMB),
and xdsl2LConfProfDpboEsCableModelC (DPBOESCMC), and xdsl2LConfProfDpboEsCableModelC (DPBOESCMC), that
that are used to estimate the frequency dependent loss of E-side are used to estimate the frequency dependent loss of E-side
cables calculated from the xdsl2LConfProfDpboEsEL (DPBOESEL) cables calculated from the xdsl2LConfProfDpboEsEL (DPBOESEL)
parameter. Possible values shall be coded as unsigned integers parameter. Possible values shall be coded as unsigned integers
representing a scalar value from -1 (coded as 0) to representing a scalar value from -1 (coded as 0) to 1.5
1.5 (coded as 640) in steps of 2^-8. All values in the range are (coded as 640) in steps of 2^-8. All values in the range are
valid. This parameter is used only for G.993.2." valid. This parameter is used only for G.993.2."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.13" REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.13"
DEFVAL { 0 } DEFVAL { 0 }
::= { xdsl2LineConfProfEntry 39 } ::= { xdsl2LineConfProfEntry 39 }
xdsl2LConfProfDpboEsCableModelC OBJECT-TYPE xdsl2LConfProfDpboEsCableModelC OBJECT-TYPE
SYNTAX Unsigned32 (0..640) SYNTAX Unsigned32 (0..640)
UNITS "2^-8" UNITS "2^-8"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"(DPBOESCMC). "(DPBOESCMC).
The E-side Cable Model parameter C (DPBOESCMC) of the The E-side Cable Model parameter C (DPBOESCMC) of the
cable model (DPBOESCM) for cables connecting exchange based DSL cable model (DPBOESCM) for cables connecting exchange based DSL
services to a remote flexibility point (cabinet), that hosts services to a remote flexibility point (cabinet), that hosts
the xTU-C that is subject to spectrally shaped downstream the xTU-C that is subject to spectrally shaped downstream
power back-off (DPBO) depending on this value. power back-off (DPBO) depending on this value.
The cable model is in terms of three The cable model is in terms of three
scalars xdsl2LConfProfDpboEsCableModelA (DPBOESCMA), scalars xdsl2LConfProfDpboEsCableModelA (DPBOESCMA),
xdsl2LConfProfDpboEsCableModelB(DPBOESCMB), xdsl2LConfProfDpboEsCableModelB(DPBOESCMB),
and xdsl2LConfProfDpboEsCableModelC (DPBOESCMC), and xdsl2LConfProfDpboEsCableModelC (DPBOESCMC), that
that are used to estimate the frequency dependent loss of E-side are used to estimate the frequency dependent loss of E-side
cables calculated from the xdsl2LConfProfDpboEsEL (DPBOESEL) cables calculated from the xdsl2LConfProfDpboEsEL (DPBOESEL)
parameter. Possible values shall be coded as unsigned integers parameter. Possible values shall be coded as unsigned integers
representing a scalar value from -1 (coded as 0) to representing a scalar value from -1 (coded as 0) to 1.5
1.5 (coded as 640) in steps of 2^-8. All values in the range are (coded as 640) in steps of 2^-8. All values in the range are
valid. This parameter is used only for G.993.2." valid. This parameter is used only for G.993.2."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.13" REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.13"
DEFVAL { 0 } DEFVAL { 0 }
::= { xdsl2LineConfProfEntry 40 } ::= { xdsl2LineConfProfEntry 40 }
xdsl2LConfProfDpboMus OBJECT-TYPE xdsl2LConfProfDpboMus OBJECT-TYPE
SYNTAX Unsigned32 (0..255) SYNTAX Unsigned32 (0..255)
UNITS "0.5 dBm/Hz" UNITS "0.5 dBm/Hz"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"(DPBOMUS). "(DPBOMUS).
This configuration parameter defines the assumed Minimum Usable This configuration parameter defines the assumed Minimum Usable
receive PSD mask (in dBm/Hz) for exchange based services, receive PSD mask (in dBm/Hz) for exchange based services, used
used to modify parameter xdsl2LConfProfDpboFMax (DPBOFMAX) defined to modify parameter xdsl2LConfProfDpboFMax (DPBOFMAX) defined
below [to determine the DPBO]. It shall be coded as an unsigned below [to determine the DPBO]. It shall be coded as an unsigned
integer representing a PSD mask level from 0 dBm/Hz (coded as 0) integer representing a PSD mask level from 0 dBm/Hz (coded as
to -127.5 dBm/Hz (coded as 255) in steps of 0.5 dBm/Hz. All values 0) to -127.5 dBm/Hz (coded as 255) in steps of 0.5 dBm/Hz. All
in the range are valid. values in the range are valid.
NOTE - The PSD mask level is 3.5 dB above the signal PSD NOTE - The PSD mask level is 3.5 dB above the signal PSD
level. This parameter is used only for G.993.2." level. This parameter is used only for G.993.2."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.13" REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.13"
DEFVAL { 0 } DEFVAL { 0 }
::= { xdsl2LineConfProfEntry 41 } ::= { xdsl2LineConfProfEntry 41 }
xdsl2LConfProfDpboFMin OBJECT-TYPE xdsl2LConfProfDpboFMin OBJECT-TYPE
SYNTAX Unsigned32 (0..2048) SYNTAX Unsigned32 (0..2048)
UNITS "4.3125 kHz" UNITS "4.3125 kHz"
MAX-ACCESS read-create MAX-ACCESS read-create
skipping to change at page 131, line 6 skipping to change at page 136, line 44
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"(UPBOKL). "(UPBOKL).
This configuration parameter defines the electrical length This configuration parameter defines the electrical length
expressed in dB at 1MHz, kl0, configured by the CO-MIB. expressed in dB at 1MHz, kl0, configured by the CO-MIB.
The value ranges from 0 (coded as 0) to 128 dB (coded as 1280) The value ranges from 0 (coded as 0) to 128 dB (coded as 1280)
in steps of 0.1 dB. This parameter is relevant only if in steps of 0.1 dB. This parameter is relevant only if
xdsl2LConfProfUpboKLF is set to override(2), which indicates xdsl2LConfProfUpboKLF is set to override(2), which indicates
that this parameter's value will override the VTUs' that this parameter's value will override the VTUs'
determination of the electrical length. If xdsl2LConfProfUpboKLF determination of the electrical length.
is set either to auto(1) or disableUpbo(3), then this parameter If xdsl2LConfProfUpboKLF is set either to auto(1) or
will be ignored." disableUpbo(3), then this parameter will be ignored."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.14" REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.14"
DEFVAL { 0 } DEFVAL { 0 }
::= { xdsl2LineConfProfEntry 44 } ::= { xdsl2LineConfProfEntry 44 }
xdsl2LConfProfUpboKLF OBJECT-TYPE xdsl2LConfProfUpboKLF OBJECT-TYPE
SYNTAX Xdsl2UpboKLF SYNTAX Xdsl2UpboKLF
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Defines the upstream power backoff force mode (UPBOKLF). "Defines the upstream power backoff force mode (UPBOKLF).
skipping to change at page 131, line 37 skipping to change at page 137, line 27
xdsl2LConfProfUs0Mask OBJECT-TYPE xdsl2LConfProfUs0Mask OBJECT-TYPE
SYNTAX Xdsl2LineUs0Mask SYNTAX Xdsl2LineUs0Mask
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"(US0MASK). "(US0MASK).
The configuration parameter contains the US0 PSD masks The configuration parameter contains the US0 PSD masks
to be allowed by the near-end xTU on the line. This parameter to be allowed by the near-end xTU on the line. This parameter
is only defined for G.993.2 Annex A. It is represented as a is only defined for G.993.2 Annex A. It is represented as a
bitmap (0 if not allowed and 1 if allowed). " bitmap (0 if not allowed and 1 if allowed). "
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.18" REFERENCE "ITU-T G.997.1 Amendment 1, paragraph #7.3.1.2.18"
DEFVAL { {} } DEFVAL { {} }
::= { xdsl2LineConfProfEntry 46 } ::= { xdsl2LineConfProfEntry 46 }
xdsl2LConfProfForceInp OBJECT-TYPE xdsl2LConfProfForceInp OBJECT-TYPE
SYNTAX Xdsl2LineForceInp SYNTAX Xdsl2LineForceInp
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"(FORCEINP). "(FORCEINP).
This parameter indicates that the framer settings of the This parameter indicates that the framer settings of the
skipping to change at page 132, line 4 skipping to change at page 137, line 42
SYNTAX Xdsl2LineForceInp SYNTAX Xdsl2LineForceInp
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"(FORCEINP). "(FORCEINP).
This parameter indicates that the framer settings of the This parameter indicates that the framer settings of the
bearer shall be selected such that the impulse noise bearer shall be selected such that the impulse noise
protection computed according to the formula specified in protection computed according to the formula specified in
the relevant Recommendation is greater than or equal to the the relevant Recommendation is greater than or equal to the
minimal impulse noise protection requirement. minimal impulse noise protection requirement.
This flag shall have the same value for all the bearers of This flag shall have the same value for all the bearers of
one line in the same direction." one line in the same direction."
REFERENCE "ITU-T G.997.1, paragraph #7.3.2.5" REFERENCE "ITU-T G.997.1, paragraph #7.3.2.5"
DEFVAL { {} } DEFVAL { {} }
::= { xdsl2LineConfProfEntry 47 } ::= { xdsl2LineConfProfEntry 47 }
xdsl2LConfProfRowStatus OBJECT-TYPE xdsl2LConfProfRowStatus OBJECT-TYPE
SYNTAX RowStatus SYNTAX RowStatus
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object is used to create a new row or to modify or "This object is used to create a new row or to modify or
delete an existing row in this table. delete an existing row in this table.
A profile is activated by setting this object to 'active'. A profile is activated by setting this object to 'active'.
When 'active' is set, the system will validate the profile. When 'active' is set, the system will validate the profile.
skipping to change at page 137, line 36 skipping to change at page 143, line 22
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The selected upstream PSD mask. This parameter is used only "The selected upstream PSD mask. This parameter is used only
for annexes J and M of G.992.3 and G.992.5, and the same for annexes J and M of G.992.3 and G.992.5, and the same
selection is used for all relevant enabled bits in selection is used for all relevant enabled bits in
xdsl2LConfProfXtuTransSysEna. " xdsl2LConfProfXtuTransSysEna. "
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.11" REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.11"
DEFVAL { adlu32Eu32 } DEFVAL { adlu32Eu32 }
::= { xdsl2LineConfProfModeSpecEntry 9 } ::= { xdsl2LineConfProfModeSpecEntry 9 }
xdsl2LConfProfClassMask OBJECT-TYPE xdsl2LConfProfClassMask OBJECT-TYPE
SYNTAX Xdsl2LineClassMask SYNTAX Xdsl2LineClassMask
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"(CLASSMASK). "(CLASSMASK).
In order to reduce the number of configuration In order to reduce the number of configuration
possibilities, the limit Power Spectral Density masks possibilities, the limit Power Spectral Density masks
(see LIMITMASK) are grouped in PSD mask classes. (see LIMITMASK) are grouped in PSD mask classes.
Each class is designed such that the PSD levels of each Each class is designed such that the PSD levels of each
limit PSD mask of a specific class are equal in their limit PSD mask of a specific class are equal in their
respective passband above 276 kHz. respective passband above 552 kHz.
This parameter is defined per VDSL2 Annex enabled in the This parameter is defined per VDSL2 Annex enabled in the
xdsl2LConfProfXtuTransSysEna object. It selects a single xdsl2LConfProfXtuTransSysEna object. It selects a single
PSD mask class per Annex that is activated at the PSD mask class per Annex that is activated at the
VTU-O." VTU-O."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.15" REFERENCE "ITU-T G.997.1 Amendment 1, paragraph #7.3.1.2.15"
DEFVAL { a998ORb997M1cORc998 } DEFVAL { a998ORb997M1cORc998B }
::= { xdsl2LineConfProfModeSpecEntry 10 } ::= { xdsl2LineConfProfModeSpecEntry 10 }
xdsl2LConfProfLimitMask OBJECT-TYPE xdsl2LConfProfLimitMask OBJECT-TYPE
SYNTAX Xdsl2LineLimitMask SYNTAX Xdsl2LineLimitMask
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"(LIMITMASK). "(LIMITMASK).
This configuration parameter contains the G.993.2 limit This configuration parameter contains the G.993.2 limit
PSD masks of the selected PSD mask class, enabled by the PSD masks of the selected PSD mask class, enabled by the
skipping to change at page 138, line 20 skipping to change at page 144, line 4
xdsl2LConfProfLimitMask OBJECT-TYPE xdsl2LConfProfLimitMask OBJECT-TYPE
SYNTAX Xdsl2LineLimitMask SYNTAX Xdsl2LineLimitMask
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"(LIMITMASK). "(LIMITMASK).
This configuration parameter contains the G.993.2 limit This configuration parameter contains the G.993.2 limit
PSD masks of the selected PSD mask class, enabled by the PSD masks of the selected PSD mask class, enabled by the
near-end xTU on this line for each class of profiles. near-end xTU on this line for each class of profiles.
This parameter is defined per VDSL2 Annex enabled in the This parameter is defined per VDSL2 Annex enabled in the
xdsl2LConfProfXtuTransSysEna object. xdsl2LConfProfXtuTransSysEna object.
Through this parameter several limit PSD masks of the Through this parameter several limit PSD masks of the
selected PSD mask class (xdsl2LConfProfClassMask) may be selected PSD mask class (xdsl2LConfProfClassMask) may be
enabled. The enabling parameter is coded in a bitmap enabled. The enabling parameter is coded in a bitmap
representation (0 if the associated mask is not allowed, representation (0 if the associated mask is not allowed,
1 if it is allowed)." 1 if it is allowed)."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.16" REFERENCE "ITU-T G.997.1 Amendment 1, paragraph #7.3.1.2.16"
DEFVAL { {} } DEFVAL { {} }
::= { xdsl2LineConfProfModeSpecEntry 11 } ::= { xdsl2LineConfProfModeSpecEntry 11 }
xdsl2LConfProfUs0Disable OBJECT-TYPE xdsl2LConfProfUs0Disable OBJECT-TYPE
SYNTAX Xdsl2LineUs0Disable SYNTAX Xdsl2LineUs0Disable
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"(US0DISABLE). "(US0DISABLE).
This configuration parameter indicates if the use of This configuration parameter indicates if the use of
skipping to change at page 139, line 5 skipping to change at page 144, line 37
For each limit PSD mask enabled in xdsl2LConfProfLimitMask For each limit PSD mask enabled in xdsl2LConfProfLimitMask
parameter, a bit shall indicate if US0 is disabled. The parameter, a bit shall indicate if US0 is disabled. The
disabling parameter is coded as a bitmap. The bit is set to disabling parameter is coded as a bitmap. The bit is set to
1 if US0 is disabled for the associated limit mask. 1 if US0 is disabled for the associated limit mask.
This parameter and the xdsl2LConfProfLimitMask parameter This parameter and the xdsl2LConfProfLimitMask parameter
use the same structure." use the same structure."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.17" REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.17"
DEFVAL { {} } DEFVAL { {} }
::= { xdsl2LineConfProfModeSpecEntry 12 } ::= { xdsl2LineConfProfModeSpecEntry 12 }
xdsl2LConfProfModeSpecRowStatus OBJECT-TYPE xdsl2LConfProfModeSpecRowStatus OBJECT-TYPE
SYNTAX RowStatus SYNTAX RowStatus
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object is used to create a new row or to modify or "This object is used to create a new row or to modify or
delete an existing row in this table. delete an existing row in this table.
A profile is activated by setting this object to 'active'. A profile is activated by setting this object to 'active'.
skipping to change at page 139, line 38 skipping to change at page 145, line 16
------------------------------------------ ------------------------------------------
-- xdsl2LineConfProfModeSpecBandUsTable -- -- xdsl2LineConfProfModeSpecBandUsTable --
------------------------------------------ ------------------------------------------
xdsl2LineConfProfModeSpecBandUsTable OBJECT-TYPE xdsl2LineConfProfModeSpecBandUsTable OBJECT-TYPE
SYNTAX SEQUENCE OF Xdsl2LineConfProfModeSpecBandUsEntry SYNTAX SEQUENCE OF Xdsl2LineConfProfModeSpecBandUsEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table xdsl2LineConfProfModeSpecBandUsTable extends "The table xdsl2LineConfProfModeSpecBandUsTable extends
xdsl2LineConfProfModeSpecTable with upstream-band-specific xdsl2LineConfProfModeSpecTable with upstream-band-specific
parameters for VDSL2, such as upstream power back-off parameters, parameters for VDSL2, such as upstream power back-off
xdsl2LConfProfUpboPsdA and xdsl2LConfProfUpboPsdB (UPBOPSD-pb). parameters, xdsl2LConfProfUpboPsdA and xdsl2LConfProfUpboPsdB
(UPBOPSD-pb).
When a parent 'mandatory row' is created in When a parent 'mandatory row' is created in
xdsl2LineConfProfModeSpecTable, the SNMP agent will automatically xdsl2LineConfProfModeSpecTable, the SNMP agent will
create several 'mandatory' rows in this table--one for automatically create several 'mandatory' rows in this table--
each upstream band: one for each upstream band:
Note: A mandatory row is one where xdsl2LConfProfXdslMode = Note: A mandatory row is one where xdsl2LConfProfXdslMode =
defMode(1). When the parent row is deleted, the SNMP agent will defMode(1). When the parent row is deleted, the SNMP agent will
automatically delete all associated rows in this table. Any automatically delete all associated rows in this table. Any
attempt to delete a 'mandatory' row using the attempt to delete a 'mandatory' row using the
xdsl2LConfProfModeSpecBandUsRowStatus attribute will be rejected xdsl2LConfProfModeSpecBandUsRowStatus attribute will be
by the SNMP agent. The manager only MAY create a new 'optional' rejected by the SNMP agent. The manager only MAY create a new
row in this table using the xdsl2LConfProfModeSpecBandUsRowStatus 'optional' row in this table using the
attribute if the associated parent optional row exists, and xdsl2LConfProfModeSpecBandUsRowStatus attribute if the
the value of xdsl2LConfProfXdslMode is a G.993.2 value. The associated parent optional row exists, and the value of
manager MAY delete an 'optional' row in this table using the xdsl2LConfProfXdslMode is a G.993.2 value. The manager MAY
delete an 'optional' row in this table using the
xdsl2LConfProfModeSpecBandUsRowStatus attribute at any time. xdsl2LConfProfModeSpecBandUsRowStatus attribute at any time.
With respect to xdsl2LConfProfUpboPsdA and xdsl2LConfProfUpboPsdB With respect to xdsl2LConfProfUpboPsdA and
parameters, for a given upstream band, if an optional row xdsl2LConfProfUpboPsdB parameters, for a given upstream band,
is missing from this table, then that means upstream power back- if an optional row is missing from this table, then that means
off is disabled for that upstream band. upstream power back-off is disabled for that upstream band.
Entries in this table MUST be maintained in a Entries in this table MUST be maintained in a persistent
persistent manner." manner."
::= { xdsl2ProfileLine 4 } ::= { xdsl2ProfileLine 4 }
xdsl2LineConfProfModeSpecBandUsEntry OBJECT-TYPE xdsl2LineConfProfModeSpecBandUsEntry OBJECT-TYPE
SYNTAX Xdsl2LineConfProfModeSpecBandUsEntry SYNTAX Xdsl2LineConfProfModeSpecBandUsEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table xdsl2LineConfProfModeSpecBandUsTable extends "The table xdsl2LineConfProfModeSpecBandUsTable extends
xdsl2LineConfProfModeSpecTable with upstream-band-specific xdsl2LineConfProfModeSpecTable with upstream-band-specific
parameters for VDSL2, such as upstream power back-off parameters for VDSL2, such as upstream power back-off
skipping to change at page 141, line 7 skipping to change at page 146, line 36
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.14" REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.14"
::= { xdsl2LineConfProfModeSpecBandUsEntry 1 } ::= { xdsl2LineConfProfModeSpecBandUsEntry 1 }
xdsl2LConfProfUpboPsdA OBJECT-TYPE xdsl2LConfProfUpboPsdA OBJECT-TYPE
SYNTAX Integer32(4000..8095) SYNTAX Integer32(4000..8095)
UNITS "0.01 dBm/Hz" UNITS "0.01 dBm/Hz"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"(UPBOPSD-pb). "(UPBOPSD-pb).
This configuration parameter defines the 'a' reference parameter This configuration parameter defines the 'a' reference
of the UPBO reference PSD used to compute the upstream power parameter of the UPBO reference PSD used to compute the
back-off for the upstream band. A UPBOPSD defined for each band upstream power back-off for the upstream band. A UPBOPSD
shall consist of two parameters [a, b]. Parameter 'a' defined for each band shall consist of two parameters [a, b].
(xdsl2LConfProfUpboPsdA) ranges from 40 dBm/Hz (coded as 4000) to Parameter 'a' (xdsl2LConfProfUpboPsdA) ranges from 40 dBm/Hz
80.95 dBm/Hz (coded as 8095) in steps of 0.01 dBm/Hz; and (coded as 4000) to 80.95 dBm/Hz (coded as 8095) in steps of
parameter 'b' (xdsl2LConfProfUpboPsdB) ranges from 0 dBm/Hz 0.01 dBm/Hz; and parameter 'b' (xdsl2LConfProfUpboPsdB) ranges
(coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps of from 0 dBm/Hz (coded as 0) to 40.95 dBm/Hz (coded as 4095) in
0.01 dBm/Hz. The UPBO reference PSD at the frequency 'f' expressed steps of 0.01 dBm/Hz. The UPBO reference PSD at the frequency
in MHz shall be equal to '-a-b(SQRT(f))'. Setting 'f' expressed in MHz shall be equal to '-a-b(SQRT(f))'. Setting
xdsl2LConfProfUpboPsdA to 4000 and xdsl2LConfProfUpboPsdB to 0 is xdsl2LConfProfUpboPsdA to 4000 and xdsl2LConfProfUpboPsdB to 0
a special configuration to disable UPBO in the respective is a special configuration to disable UPBO in the respective
upstream band." upstream band."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.14" REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.14"
DEFVAL { 4000 } DEFVAL { 4000 }
::= { xdsl2LineConfProfModeSpecBandUsEntry 2 } ::= { xdsl2LineConfProfModeSpecBandUsEntry 2 }
xdsl2LConfProfUpboPsdB OBJECT-TYPE xdsl2LConfProfUpboPsdB OBJECT-TYPE
SYNTAX Integer32(0..4095) SYNTAX Integer32(0..4095)
UNITS "0.01 dBm/Hz" UNITS "0.01 dBm/Hz"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"(UPBOPSD-pb). "(UPBOPSD-pb).
This configuration parameter defines the 'b' reference parameter This configuration parameter defines the 'b' reference
of the UPBO reference PSD used to compute the upstream power parameter of the UPBO reference PSD used to compute the
back-off for the upstream band. A UPBOPSD defined for each band upstream power back-off for the upstream band. A UPBOPSD
shall consist of two parameters [a, b]. Parameter 'a' defined for each band shall consist of two parameters [a, b].
(xdsl2LConfProfUpboPsdA) ranges from 40 dBm/Hz (coded as 4000) to Parameter 'a' (xdsl2LConfProfUpboPsdA) ranges from 40 dBm/Hz
80.95 dBm/Hz (coded as 8095) in steps of 0.01 dBm/Hz; and (coded as 4000) to 80.95 dBm/Hz (coded as 8095) in steps of
parameter 'b' (xdsl2LConfProfUpboPsdB) ranges from 0 dBm/Hz 0.01 dBm/Hz; and parameter 'b' (xdsl2LConfProfUpboPsdB) ranges
(coded as 0) to 40.95 dBm/Hz (coded as 4095) in steps of from 0 dBm/Hz (coded as 0) to 40.95 dBm/Hz (coded as 4095) in
0.01 dBm/Hz. The UPBO reference PSD at the frequency 'f' expressed steps of 0.01 dBm/Hz. The UPBO reference PSD at the frequency
in MHz shall be equal to '-a-b(SQRT(f))'. Setting 'f' expressed in MHz shall be equal to '-a-b(SQRT(f))'. Setting
xdsl2LConfProfUpboPsdA to 4000 and xdsl2LConfProfUpboPsdB to 0 is xdsl2LConfProfUpboPsdA to 4000 and xdsl2LConfProfUpboPsdB to 0
a special configuration to disable UPBO in the respective is a special configuration to disable UPBO in the respective
upstream band." upstream band."
REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.14" REFERENCE "ITU-T G.997.1, paragraph #7.3.1.2.14"
DEFVAL { 0 } DEFVAL { 0 }
::= { xdsl2LineConfProfModeSpecBandUsEntry 3 } ::= { xdsl2LineConfProfModeSpecBandUsEntry 3 }
xdsl2LConfProfModeSpecBandUsRowStatus OBJECT-TYPE xdsl2LConfProfModeSpecBandUsRowStatus OBJECT-TYPE
SYNTAX RowStatus SYNTAX RowStatus
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
skipping to change at page 143, line 21 skipping to change at page 148, line 49
xdsl2ChConfProfMinProtectionUs Xdsl2SymbolProtection, xdsl2ChConfProfMinProtectionUs Xdsl2SymbolProtection,
xdsl2ChConfProfMinProtection8Ds Xdsl2SymbolProtection8, xdsl2ChConfProfMinProtection8Ds Xdsl2SymbolProtection8,
xdsl2ChConfProfMinProtection8Us Xdsl2SymbolProtection8, xdsl2ChConfProfMinProtection8Us Xdsl2SymbolProtection8,
xdsl2ChConfProfMaxBerDs Xdsl2MaxBer, xdsl2ChConfProfMaxBerDs Xdsl2MaxBer,
xdsl2ChConfProfMaxBerUs Xdsl2MaxBer, xdsl2ChConfProfMaxBerUs Xdsl2MaxBer,
xdsl2ChConfProfUsDataRateDs Unsigned32, xdsl2ChConfProfUsDataRateDs Unsigned32,
xdsl2ChConfProfDsDataRateDs Unsigned32, xdsl2ChConfProfDsDataRateDs Unsigned32,
xdsl2ChConfProfUsDataRateUs Unsigned32, xdsl2ChConfProfUsDataRateUs Unsigned32,
xdsl2ChConfProfDsDataRateUs Unsigned32, xdsl2ChConfProfDsDataRateUs Unsigned32,
xdsl2ChConfProfImaEnabled TruthValue, xdsl2ChConfProfImaEnabled TruthValue,
xdsl2ChConfProfMaxDelayVar Unsigned32,
xdsl2ChConfProfInitPolicy Xdsl2ChInitPolicy,
xdsl2ChConfProfRowStatus RowStatus xdsl2ChConfProfRowStatus RowStatus
} }
xdsl2ChConfProfProfileName OBJECT-TYPE xdsl2ChConfProfProfileName OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE(1..32)) SYNTAX SnmpAdminString (SIZE(1..32))
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object identifies a row in this table." "This object identifies a row in this table."
::= { xdsl2ChConfProfileEntry 1 } ::= { xdsl2ChConfProfileEntry 1 }
skipping to change at page 150, line 14 skipping to change at page 155, line 44
"IMA Mode Enable. The parameter enables the IMA operation "IMA Mode Enable. The parameter enables the IMA operation
mode mode
in the ATM Data Path. Relevant only if the channel is of ATM in the ATM Data Path. Relevant only if the channel is of ATM
Data Path. When in 'enable' state, the ATM data path Data Path. When in 'enable' state, the ATM data path
should should
comply with the requirements for IMA transmission." comply with the requirements for IMA transmission."
REFERENCE "ITU-T G.997.1, paragraph #7.3.4.1" REFERENCE "ITU-T G.997.1, paragraph #7.3.4.1"
DEFVAL { false } DEFVAL { false }
::= { xdsl2ChConfProfileEntry 22 } ::= { xdsl2ChConfProfileEntry 22 }
xdsl2ChConfProfMaxDelayVar OBJECT-TYPE
SYNTAX Unsigned32(1..255)
UNITS "0.1 milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Maximum delay variation (DVMAX).
This optional VDSL2 specific parameter specifies the maximum
value for the delay variation allowed in an OLR procedure.
It is ranges from 1 to 254 units of 0.1 milliseconds
(i.e., 0.1 to 25.4 milliseconds) with the special value
255 which indicates that no delay variation bound is
imposed."
REFERENCE "ITU-T G.997.1 Amendment 1, paragraph #7.3.2.9"
DEFVAL { 255 }
::= { xdsl2ChConfProfileEntry 23 }
xdsl2ChConfProfInitPolicy OBJECT-TYPE
SYNTAX Xdsl2ChInitPolicy
MAX-ACCESS read-create
STATUS current
DESCRIPTION
"Channel Initialization Policy Selection (CIPOLICY).
This optional parameter indicates which policy shall be applied
to determine the transceiver configuration parameters at
initialization. The valid values for CIPOLICY are policy0 and
policy1. Those policies are defined in the respective
Recommendations."
REFERENCE "ITU-T G.997.1 Amendment 1, paragraph #7.3.2.10"
DEFVAL { policy0 }
::= { xdsl2ChConfProfileEntry 24 }
xdsl2ChConfProfRowStatus OBJECT-TYPE xdsl2ChConfProfRowStatus OBJECT-TYPE
SYNTAX RowStatus SYNTAX RowStatus
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object is used to create a new row or to modify or "This object is used to create a new row or to modify or
delete an existing row in this table. delete an existing row in this table.
A profile is activated by setting this object to 'active'. A profile is activated by setting this object to 'active'.
When 'active' is set, the system will validate the profile. When 'active' is set, the system will validate the profile.
Before a profile can be deleted or taken out of service Before a profile can be deleted or taken out of service
(by setting this object to 'destroy' or 'notInService'), (by setting this object to 'destroy' or 'notInService'),
it must be first unreferenced from all associated it must be first unreferenced from all associated
templates." templates."
::= { xdsl2ChConfProfileEntry 23 } ::= { xdsl2ChConfProfileEntry 25 }
------------------------------------------------ ------------------------------------------------
-- xdsl2LineAlarmConfTemplateTable -- -- xdsl2LineAlarmConfTemplateTable --
------------------------------------------------ ------------------------------------------------
xdsl2LineAlarmConfTemplateTable OBJECT-TYPE xdsl2LineAlarmConfTemplateTable OBJECT-TYPE
SYNTAX SEQUENCE OF Xdsl2LineAlarmConfTemplateEntry SYNTAX SEQUENCE OF Xdsl2LineAlarmConfTemplateEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The table xdsl2LineAlarConfTemplateTable contains DSL "The table xdsl2LineAlarConfTemplateTable contains DSL
skipping to change at page 192, line 42 skipping to change at page 199, line 14
xdsl2LineStatusXtur xdsl2LineStatusXtur
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This notification indicates that a status change is "This notification indicates that a status change is
detected for the referred XTU-R." detected for the referred XTU-R."
::= { xdsl2Notifications 18 } ::= { xdsl2Notifications 18 }
-- conformance information -- conformance information
vdsl2Groups OBJECT IDENTIFIER ::= { xdsl2Conformance 1 } xdsl2Groups OBJECT IDENTIFIER ::= { xdsl2Conformance 1 }
vdsl2Compliances OBJECT IDENTIFIER ::= { xdsl2Conformance 2 } xdsl2Compliances OBJECT IDENTIFIER ::= { xdsl2Conformance 2 }
vdsl2LineMibCompliance MODULE-COMPLIANCE xdsl2LineMibCompliance MODULE-COMPLIANCE
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The compliance statement for SNMP entities which "The compliance statement for SNMP entities which
manage VDSL2/ADSL/ADSL2 and ADSL2+ interfaces." manage VDSL2/ADSL/ADSL2 and ADSL2+ interfaces."
MODULE -- this module MODULE -- this module
MANDATORY-GROUPS MANDATORY-GROUPS
{ {
vdsl2LineGroup, xdsl2LineGroup,
vdsl2ChannelStatusGroup, xdsl2ChannelStatusGroup,
vdsl2SCStatusGroup, xdsl2SCStatusGroup,
vdsl2LineInventoryGroup, xdsl2LineInventoryGroup,
vdsl2LineConfTemplateGroup, xdsl2LineConfTemplateGroup,
vdsl2LineConfProfGroup, xdsl2LineConfProfGroup,
vdsl2LineConfProfModeSpecGroup, xdsl2LineConfProfModeSpecGroup,
vdsl2LineConfProfModeSpecBandUsGroup, xdsl2LineConfProfModeSpecBandUsGroup,
vdsl2ChConfProfileGroup, xdsl2ChConfProfileGroup,
vdsl2LineAlarmConfTemplateGroup, xdsl2LineAlarmConfTemplateGroup,
vdsl2PMLineCurrGroup, xdsl2PMLineCurrGroup,
vdsl2PMLineCurrInitGroup, xdsl2PMLineCurrInitGroup,
vdsl2PMLineHist15MinGroup, xdsl2PMLineHist15MinGroup,
vdsl2PMLineHist1DayGroup, xdsl2PMLineHist1DayGroup,
vdsl2PMLineInitHist15MinGroup, xdsl2PMLineInitHist15MinGroup,
vdsl2PMLineInitHist1DayGroup, xdsl2PMLineInitHist1DayGroup,
vdsl2PMChCurrGroup, xdsl2PMChCurrGroup,
vdsl2PMChHist15MinGroup, xdsl2PMChHist15MinGroup,
vdsl2PMChHist1DGroup xdsl2PMChHist1DGroup
} }
GROUP vdsl2LineBpscGroup GROUP xdsl2LineFallbackGroup
DESCRIPTION
"The group of configuration, status, and commands
objects on the line level that are associated with
the fallback feature."
GROUP xdsl2LineBpscGroup
DESCRIPTION DESCRIPTION
"The group of configuration, status, and commands objects "The group of configuration, status, and commands objects
on the line level that are associated with requesting a bits per on the line level that are associated with requesting a bits
sub-carrier measurement." per sub-carrier measurement."
GROUP vdsl2LineSegmentGroup GROUP xdsl2LineSegmentGroup
DESCRIPTION DESCRIPTION
"The group of status, and commands objects on the line level "The group of status, and commands objects on the line level
that are used to hold the results of the bits per sub-carrier that are used to hold the results of the bits per sub-carrier
measurement." measurement."
GROUP vdsl2ChannelStatusAtmGroup GROUP xdsl2ChannelStatusAtmGroup
DESCRIPTION DESCRIPTION
"The group of status objects required when the data path "The group of status objects required when the data path
is ATM." is ATM."
GROUP vdsl2ChannelStatusPtmGroup GROUP xdsl2ChannelStatusPtmGroup
DESCRIPTION DESCRIPTION
"The group of status objects required when the data path "The group of status objects required when the data path
is PTM." is PTM."
GROUP vdsl2LineConfProfRaGroup GROUP xdsl2LineConfProfRaGroup
DESCRIPTION DESCRIPTION
"The group of objects required for controlling the rate "The group of objects required for controlling the rate
adaptive behavior of the line." adaptive behavior of the line."
GROUP vdsl2LineConfProfMsgMinGroup
GROUP xdsl2LineConfProfMsgMinGroup
DESCRIPTION DESCRIPTION
"The group of objects required for controlling the rate "The group of objects required for controlling the rate
reserved for Overhead traffic." reserved for Overhead traffic."
GROUP vdsl2LineAlarmConfProfileGroup GROUP xdsl2LineAlarmConfProfileGroup
DESCRIPTION DESCRIPTION
"The group of objects that define the alarm thresholds "The group of objects that define the alarm thresholds
on line level PM counters." on line level PM counters."
GROUP vdsl2ChAlarmConfProfileGroup GROUP xdsl2ChAlarmConfProfileGroup
DESCRIPTION DESCRIPTION
"The group of objects that define the alarm thresholds "The group of objects that define the alarm thresholds
on channel level PM counters." on channel level PM counters."
GROUP vdsl2ChConfProfileAtmGroup GROUP xdsl2ChConfProfileAtmGroup
DESCRIPTION DESCRIPTION
"The group of configuration objects required when the data "The group of configuration objects required when the data
path is ATM." path is ATM."
GROUP vdsl2ChConfProfileMinResGroup GROUP xdsl2ChConfProfileMinResGroup
DESCRIPTION DESCRIPTION
"The group of configuration objects required for the "The group of configuration objects required for the
reserved data rate." reserved data rate."
GROUP vdsl2PMLineCurrInitShortGroup GROUP xdsl2ChConfProfileOptAttrGroup
DESCRIPTION
"The group of various optional channel configuration
objects."
GROUP xdsl2PMLineCurrInitShortGroup
DESCRIPTION DESCRIPTION
"The group of PM counters for the current intervals "The group of PM counters for the current intervals
short initializations." short initializations."
GROUP vdsl2PMLineInitHist15MinShortGroup GROUP xdsl2PMLineInitHist15MinShortGroup
DESCRIPTION DESCRIPTION
"The group of PM counters for the previous 15 minutes "The group of PM counters for the previous 15 minutes
intervals short initializations." intervals short initializations."
GROUP vdsl2PMLineInitHist1DayShortGroup GROUP xdsl2PMLineInitHist1DayShortGroup
DESCRIPTION DESCRIPTION
"The group of PM counters for the previous 24 hours "The group of PM counters for the previous 24 hours
intervals short initializations." intervals short initializations."
GROUP vdsl2ScalarSCGroup GROUP xdsl2ScalarSCGroup
DESCRIPTION DESCRIPTION
"The group of objects that report the available memory "The group of objects that report the available memory
resources for DELT processes." resources for DELT processes."
GROUP vdsl2ThreshNotificationGroup GROUP xdsl2ThreshNotificationGroup
DESCRIPTION DESCRIPTION
"The group of thresholds crossing notifications." "The group of thresholds crossing notifications."
GROUP vdsl2StatusChangeNotificationGroup
GROUP xdsl2StatusChangeNotificationGroup
DESCRIPTION DESCRIPTION
"The group of status change notifications." "The group of status change notifications."
::= { vdsl2Compliances 1 } ::= { xdsl2Compliances 1 }
-- units of conformance -- units of conformance
vdsl2LineGroup OBJECT-GROUP xdsl2LineGroup OBJECT-GROUP
OBJECTS OBJECTS
{ {
xdsl2LineCnfgTemplate, xdsl2LineCnfgTemplate,
xdsl2LineAlarmCnfgTemplate, xdsl2LineAlarmCnfgTemplate,
xdsl2LineCmndConfPmsf, xdsl2LineCmndConfPmsf,
xdsl2LineCmndConfLdsf, xdsl2LineCmndConfLdsf,
xdsl2LineCmndConfLdsfFailReason, xdsl2LineCmndConfLdsfFailReason,
xdsl2LineCmndAutomodeColdStart, xdsl2LineCmndAutomodeColdStart,
xdsl2LineCmndConfReset, xdsl2LineCmndConfReset,
xdsl2LineStatusXtuTransSys, xdsl2LineStatusXtuTransSys,
skipping to change at page 195, line 41 skipping to change at page 202, line 26
xdsl2LineStatusActPsdDs, xdsl2LineStatusActPsdDs,
xdsl2LineStatusActPsdUs, xdsl2LineStatusActPsdUs,
xdsl2LineStatusActAtpDs, xdsl2LineStatusActAtpDs,
xdsl2LineStatusActAtpUs, xdsl2LineStatusActAtpUs,
xdsl2LineStatusActProfile, xdsl2LineStatusActProfile,
xdsl2LineStatusActLimitMask, xdsl2LineStatusActLimitMask,
xdsl2LineStatusActUs0Mask, xdsl2LineStatusActUs0Mask,
xdsl2LineStatusActSnrModeDs, xdsl2LineStatusActSnrModeDs,
xdsl2LineStatusActSnrModeUs, xdsl2LineStatusActSnrModeUs,
xdsl2LineStatusElectricalLength, xdsl2LineStatusElectricalLength,
xdsl2LineStatusTssiDs,
xdsl2LineStatusTssiUs,
xdsl2LineStatusMrefPsdDs,
xdsl2LineStatusMrefPsdUs,
xdsl2LineStatusTrellisDs, xdsl2LineStatusTrellisDs,
xdsl2LineStatusTrellisUs, xdsl2LineStatusTrellisUs,
xdsl2LineStatusActualCe, xdsl2LineStatusActualCe,
xdsl2LineBandStatusLnAtten, xdsl2LineBandStatusLnAtten,
xdsl2LineBandStatusSigAtten, xdsl2LineBandStatusSigAtten,
xdsl2LineBandStatusSnrMargin xdsl2LineBandStatusSnrMargin
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The group of configuration, status, and commands objects "The group of configuration, status, and commands objects
on the line level." on the line level."
::= { vdsl2Groups 1 } ::= { xdsl2Groups 1 }
vdsl2LineBpscGroup OBJECT-GROUP xdsl2LineFallbackGroup OBJECT-GROUP
OBJECTS
{
xdsl2LineCnfgFallbackTemplate,
xdsl2LineStatusActTemplate
}
STATUS current
DESCRIPTION
"The group of configuration, status, and commands
objects on the line level that are associated with
the fallback feature."
::= { xdsl2Groups 2 }
xdsl2LineBpscGroup OBJECT-GROUP
OBJECTS OBJECTS
{ {
xdsl2LineCmndConfBpsc, xdsl2LineCmndConfBpsc,
xdsl2LineCmndConfBpscFailReason, xdsl2LineCmndConfBpscFailReason,
xdsl2LineCmndConfBpscReqCount xdsl2LineCmndConfBpscReqCount
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The group of configuration, status, and commands objects "The group of configuration, status, and commands
on the line level that are associated with requesting a bits objects on the line level that are associated with
per sub-carrier measurement." requesting a bits per sub-carrier measurement."
::= { vdsl2Groups 2 } ::= { xdsl2Groups 3 }
vdsl2LineSegmentGroup OBJECT-GROUP xdsl2LineSegmentGroup OBJECT-GROUP
OBJECTS OBJECTS
{ {
xdsl2LineSegmentBitsAlloc, xdsl2LineSegmentBitsAlloc,
xdsl2LineSegmentRowStatus xdsl2LineSegmentRowStatus
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The group of status, and commands objects on the line level "The group of status, and commands objects on the line
that are used to hold the results of the bits per sub-carrier level that are used to hold the results of the bits per
measurement." sub-carrier measurement."
::= { vdsl2Groups 3 } ::= { xdsl2Groups 4 }
vdsl2ChannelStatusGroup OBJECT-GROUP xdsl2ChannelStatusGroup OBJECT-GROUP
OBJECTS OBJECTS
{ {
xdsl2ChStatusChannelNum,
xdsl2ChStatusActDataRate, xdsl2ChStatusActDataRate,
xdsl2ChStatusPrevDataRate, xdsl2ChStatusPrevDataRate,
xdsl2ChStatusActDelay, xdsl2ChStatusActDelay,
xdsl2ChStatusActInp, xdsl2ChStatusActInp,
xdsl2ChStatusInpReport, xdsl2ChStatusInpReport,
xdsl2ChStatusNFec, xdsl2ChStatusNFec,
xdsl2ChStatusRFec, xdsl2ChStatusRFec,
xdsl2ChStatusLSymb, xdsl2ChStatusLSymb,
xdsl2ChStatusIntlvDepth, xdsl2ChStatusIntlvDepth,
xdsl2ChStatusIntlvBlock, xdsl2ChStatusIntlvBlock,
xdsl2ChStatusLPath xdsl2ChStatusLPath
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The group of status objects on the channel level." "The group of status objects on the channel level."
::= { vdsl2Groups 4 } ::= { xdsl2Groups 5 }
vdsl2ChannelStatusAtmGroup OBJECT-GROUP xdsl2ChannelStatusAtmGroup OBJECT-GROUP
OBJECTS OBJECTS
{ {
xdsl2ChStatusAtmStatus xdsl2ChStatusAtmStatus
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The group of status objects on the data path level "The group of status objects on the data path level
when it is ATM." when it is ATM."
::= { vdsl2Groups 5 } ::= { xdsl2Groups 6 }
vdsl2ChannelStatusPtmGroup OBJECT-GROUP xdsl2ChannelStatusPtmGroup OBJECT-GROUP
OBJECTS OBJECTS
{ {
xdsl2ChStatusPtmStatus xdsl2ChStatusPtmStatus
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The group of status objects on the data path level "The group of status objects on the data path level
when it is PTM." when it is PTM."
::= { vdsl2Groups 6 } ::= { xdsl2Groups 7 }
vdsl2SCStatusGroup OBJECT-GROUP xdsl2SCStatusGroup OBJECT-GROUP
OBJECTS OBJECTS
{ {
xdsl2SCStatusLinScale, xdsl2SCStatusLinScale,
xdsl2SCStatusLinScGroupSize, xdsl2SCStatusLinScGroupSize,
xdsl2SCStatusLogMt, xdsl2SCStatusLogMt,
xdsl2SCStatusLogScGroupSize, xdsl2SCStatusLogScGroupSize,
xdsl2SCStatusQlnMt, xdsl2SCStatusQlnMt,
xdsl2SCStatusQlnScGroupSize, xdsl2SCStatusQlnScGroupSize,
xdsl2SCStatusSnrMtime, xdsl2SCStatusSnrMtime,
xdsl2SCStatusSnrScGroupSize, xdsl2SCStatusSnrScGroupSize,
xdsl2SCStatusBandLnAtten, xdsl2SCStatusBandLnAtten,
xdsl2SCStatusBandSigAtten, xdsl2SCStatusBandSigAtten,
xdsl2SCStatusAttainableRate, xdsl2SCStatusAttainableRate,
xdsl2SCStatusRowStatus, xdsl2SCStatusRowStatus,
xdsl2SCStatusSegmentLinReal, xdsl2SCStatusSegmentLinReal,
xdsl2SCStatusSegmentLinImg, xdsl2SCStatusSegmentLinImg,
xdsl2SCStatusSegmentLog, xdsl2SCStatusSegmentLog,
xdsl2SCStatusSegmentQln, xdsl2SCStatusSegmentQln,
xdsl2SCStatusSegmentSnr, xdsl2SCStatusSegmentSnr,
xdsl2SCStatusSegmentBitsAlloc, xdsl2SCStatusSegmentBitsAlloc,
xdsl2SCStatusSegmentGainAlloc, xdsl2SCStatusSegmentGainAlloc
xdsl2SCStatusSegmentTssi
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The group of status objects on the sub-carrier level. "The group of status objects on the sub-carrier level.
They are updated as a result of a DELT process." They are updated as a result of a DELT process."
::= { vdsl2Groups 7 } ::= { xdsl2Groups 8 }
vdsl2LineInventoryGroup OBJECT-GROUP xdsl2LineInventoryGroup OBJECT-GROUP
OBJECTS OBJECTS
{ {
xdsl2LInvG994VendorId, xdsl2LInvG994VendorId,
xdsl2LInvSystemVendorId, xdsl2LInvSystemVendorId,
xdsl2LInvVersionNumber, xdsl2LInvVersionNumber,
xdsl2LInvSerialNumber, xdsl2LInvSerialNumber,
xdsl2LInvSelfTestResult, xdsl2LInvSelfTestResult,
xdsl2LInvTransmissionCapabilities xdsl2LInvTransmissionCapabilities
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The group of inventory objects per xTU." "The group of inventory objects per xTU."
::= { vdsl2Groups 8 } ::= { xdsl2Groups 9 }
vdsl2LineConfTemplateGroup OBJECT-GROUP xdsl2LineConfTemplateGroup OBJECT-GROUP
OBJECTS OBJECTS
{ {
xdsl2LConfTempLineProfile, xdsl2LConfTempLineProfile,
xdsl2LConfTempChan1ConfProfile, xdsl2LConfTempChan1ConfProfile,
xdsl2LConfTempChan1RaRatioDs, xdsl2LConfTempChan1RaRatioDs,
xdsl2LConfTempChan1RaRatioUs, xdsl2LConfTempChan1RaRatioUs,
xdsl2LConfTempChan2ConfProfile, xdsl2LConfTempChan2ConfProfile,
xdsl2LConfTempChan2RaRatioDs, xdsl2LConfTempChan2RaRatioDs,
xdsl2LConfTempChan2RaRatioUs, xdsl2LConfTempChan2RaRatioUs,
xdsl2LConfTempChan3ConfProfile, xdsl2LConfTempChan3ConfProfile,
skipping to change at page 198, line 47 skipping to change at page 205, line 47
xdsl2LConfTempChan3RaRatioUs, xdsl2LConfTempChan3RaRatioUs,
xdsl2LConfTempChan4ConfProfile, xdsl2LConfTempChan4ConfProfile,
xdsl2LConfTempChan4RaRatioDs, xdsl2LConfTempChan4RaRatioDs,
xdsl2LConfTempChan4RaRatioUs, xdsl2LConfTempChan4RaRatioUs,
xdsl2LConfTempRowStatus xdsl2LConfTempRowStatus
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The group of objects in a line configuration "The group of objects in a line configuration
template." template."
::= { vdsl2Groups 9 } ::= { xdsl2Groups 10 }
vdsl2LineConfProfGroup OBJECT-GROUP xdsl2LineConfProfGroup OBJECT-GROUP
OBJECTS OBJECTS
{ {
xdsl2LConfProfScMaskDs, xdsl2LConfProfScMaskDs,
xdsl2LConfProfScMaskUs, xdsl2LConfProfScMaskUs,
xdsl2LConfProfVdsl2CarMask, xdsl2LConfProfVdsl2CarMask,
xdsl2LConfProfRfiBands, xdsl2LConfProfRfiBands,
xdsl2LConfProfRaModeDs, xdsl2LConfProfRaModeDs,
xdsl2LConfProfRaModeUs, xdsl2LConfProfRaModeUs,
xdsl2LConfProfTargetSnrmDs, xdsl2LConfProfTargetSnrmDs,
xdsl2LConfProfTargetSnrmUs, xdsl2LConfProfTargetSnrmUs,
skipping to change at page 199, line 46 skipping to change at page 206, line 46
xdsl2LConfProfUpboKL, xdsl2LConfProfUpboKL,
xdsl2LConfProfUpboKLF, xdsl2LConfProfUpboKLF,
xdsl2LConfProfUs0Mask, xdsl2LConfProfUs0Mask,
xdsl2LConfProfForceInp, xdsl2LConfProfForceInp,
xdsl2LConfProfRowStatus xdsl2LConfProfRowStatus
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The group of objects in a line configuration "The group of objects in a line configuration
profile." profile."
::= { vdsl2Groups 10 } ::= { xdsl2Groups 11 }
vdsl2LineConfProfRaGroup OBJECT-GROUP xdsl2LineConfProfRaGroup OBJECT-GROUP
OBJECTS OBJECTS
{ {
xdsl2LConfProfRaUsNrmDs, xdsl2LConfProfRaUsNrmDs,
xdsl2LConfProfRaUsNrmUs, xdsl2LConfProfRaUsNrmUs,
xdsl2LConfProfRaUsTimeDs, xdsl2LConfProfRaUsTimeDs,
xdsl2LConfProfRaUsTimeUs, xdsl2LConfProfRaUsTimeUs,
xdsl2LConfProfRaDsNrmsDs, xdsl2LConfProfRaDsNrmsDs,
xdsl2LConfProfRaDsNrmsUs, xdsl2LConfProfRaDsNrmsUs,
xdsl2LConfProfRaDsTimeDs, xdsl2LConfProfRaDsTimeDs,
xdsl2LConfProfRaDsTimeUs xdsl2LConfProfRaDsTimeUs
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The group of objects required for controlling the rate "The group of objects required for controlling the rate
adaptive behavior of the line." adaptive behavior of the line."
::= { vdsl2Groups 11 } ::= { xdsl2Groups 12 }
vdsl2LineConfProfMsgMinGroup OBJECT-GROUP xdsl2LineConfProfMsgMinGroup OBJECT-GROUP
OBJECTS OBJECTS
{ {
xdsl2LConfProfMsgMinUs, xdsl2LConfProfMsgMinUs,
xdsl2LConfProfMsgMinDs xdsl2LConfProfMsgMinDs
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The group of objects required for controlling the rate "The group of objects required for controlling the rate
reserved for Overhead traffic." reserved for Overhead traffic."
::= { vdsl2Groups 12 } ::= { xdsl2Groups 13 }
vdsl2LineConfProfModeSpecGroup OBJECT-GROUP xdsl2LineConfProfModeSpecGroup OBJECT-GROUP
OBJECTS OBJECTS
{ {
xdsl2LConfProfMaxNomPsdDs, xdsl2LConfProfMaxNomPsdDs,
xdsl2LConfProfMaxNomPsdUs, xdsl2LConfProfMaxNomPsdUs,
xdsl2LConfProfMaxNomAtpDs, xdsl2LConfProfMaxNomAtpDs,
xdsl2LConfProfMaxNomAtpUs, xdsl2LConfProfMaxNomAtpUs,
xdsl2LConfProfMaxAggRxPwrUs, xdsl2LConfProfMaxAggRxPwrUs,
xdsl2LConfProfPsdMaskDs, xdsl2LConfProfPsdMaskDs,
xdsl2LConfProfPsdMaskUs, xdsl2LConfProfPsdMaskUs,
xdsl2LConfProfPsdMaskSelectUs, xdsl2LConfProfPsdMaskSelectUs,
xdsl2LConfProfClassMask, xdsl2LConfProfClassMask,
xdsl2LConfProfLimitMask, xdsl2LConfProfLimitMask,
xdsl2LConfProfUs0Disable, xdsl2LConfProfUs0Disable,
xdsl2LConfProfModeSpecRowStatus xdsl2LConfProfModeSpecRowStatus
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The group of objects in a line configuration profile "The group of objects in a line configuration profile
that have an instance for each operation mode allowed." that have an instance for each operation mode allowed."
::= { vdsl2Groups 13 } ::= { xdsl2Groups 14 }
vdsl2LineConfProfModeSpecBandUsGroup OBJECT-GROUP xdsl2LineConfProfModeSpecBandUsGroup OBJECT-GROUP
OBJECTS OBJECTS
{ {
xdsl2LConfProfUpboPsdA, xdsl2LConfProfUpboPsdA,
xdsl2LConfProfUpboPsdB, xdsl2LConfProfUpboPsdB,
xdsl2LConfProfModeSpecBandUsRowStatus xdsl2LConfProfModeSpecBandUsRowStatus
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The group of objects in a line configuration profile "The group of objects in a line configuration profile
that have several per-upstream-band instances that have several per-upstream-band instances
for each operation mode allowed." for each operation mode allowed."
::= { vdsl2Groups 14 } ::= { xdsl2Groups 15 }
vdsl2ChConfProfileGroup OBJECT-GROUP xdsl2ChConfProfileGroup OBJECT-GROUP
OBJECTS OBJECTS
{ {
xdsl2ChConfProfMinDataRateDs, xdsl2ChConfProfMinDataRateDs,
xdsl2ChConfProfMinDataRateUs, xdsl2ChConfProfMinDataRateUs,
xdsl2ChConfProfMaxDataRateDs, xdsl2ChConfProfMaxDataRateDs,
xdsl2ChConfProfMaxDataRateUs, xdsl2ChConfProfMaxDataRateUs,
xdsl2ChConfProfMinDataRateLowPwrDs, xdsl2ChConfProfMinDataRateLowPwrDs,
xdsl2ChConfProfMinDataRateLowPwrUs, xdsl2ChConfProfMinDataRateLowPwrUs,
xdsl2ChConfProfMaxDelayDs, xdsl2ChConfProfMaxDelayDs,
xdsl2ChConfProfMaxDelayUs, xdsl2ChConfProfMaxDelayUs,
skipping to change at page 201, line 45 skipping to change at page 208, line 45
xdsl2ChConfProfUsDataRateDs, xdsl2ChConfProfUsDataRateDs,
xdsl2ChConfProfDsDataRateDs, xdsl2ChConfProfDsDataRateDs,
xdsl2ChConfProfUsDataRateUs, xdsl2ChConfProfUsDataRateUs,
xdsl2ChConfProfDsDataRateUs, xdsl2ChConfProfDsDataRateUs,
xdsl2ChConfProfRowStatus xdsl2ChConfProfRowStatus
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The group of objects in a channel configuration "The group of objects in a channel configuration
profile." profile."
::= { vdsl2Groups 15 } ::= { xdsl2Groups 16 }
vdsl2ChConfProfileAtmGroup OBJECT-GROUP xdsl2ChConfProfileAtmGroup OBJECT-GROUP
OBJECTS OBJECTS
{ {
xdsl2ChConfProfImaEnabled, xdsl2ChConfProfImaEnabled,
xdsl2ChStatusAtmStatus xdsl2ChStatusAtmStatus
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The group of configuration objects required when the data "The group of configuration objects required when the data
path is ATM." path is ATM."
::= { vdsl2Groups 16 } ::= { xdsl2Groups 17 }
vdsl2ChConfProfileMinResGroup OBJECT-GROUP xdsl2ChConfProfileMinResGroup OBJECT-GROUP
OBJECTS OBJECTS
{ {
xdsl2ChConfProfMinResDataRateDs, xdsl2ChConfProfMinResDataRateDs,
xdsl2ChConfProfMinResDataRateUs xdsl2ChConfProfMinResDataRateUs
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The group of configuration objects required for the "The group of configuration objects required for the
reserved data rate." reserved data rate."
::= { vdsl2Groups 17 } ::= { xdsl2Groups 18 }
vdsl2LineAlarmConfTemplateGroup OBJECT-GROUP xdsl2ChConfProfileOptAttrGroup OBJECT-GROUP
OBJECTS
{
xdsl2ChConfProfMaxDelayVar,
xdsl2ChConfProfInitPolicy
}
STATUS current
DESCRIPTION
"The group of various optional
channel configuration parameters."
::= { xdsl2Groups 19 }
xdsl2LineAlarmConfTemplateGroup OBJECT-GROUP
OBJECTS OBJECTS
{ {
xdsl2LAlarmConfTempLineProfile, xdsl2LAlarmConfTempLineProfile,
xdsl2LAlarmConfTempChan1ConfProfile, xdsl2LAlarmConfTempChan1ConfProfile,
xdsl2LAlarmConfTempChan2ConfProfile, xdsl2LAlarmConfTempChan2ConfProfile,
xdsl2LAlarmConfTempChan3ConfProfile, xdsl2LAlarmConfTempChan3ConfProfile,
xdsl2LAlarmConfTempChan4ConfProfile, xdsl2LAlarmConfTempChan4ConfProfile,
xdsl2LAlarmConfTempRowStatus xdsl2LAlarmConfTempRowStatus
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The group of objects in a line alarm "The group of objects in a line alarm
template." template."
::= { vdsl2Groups 18 } ::= { xdsl2Groups 20 }
vdsl2LineAlarmConfProfileGroup OBJECT-GROUP xdsl2LineAlarmConfProfileGroup OBJECT-GROUP
OBJECTS OBJECTS
{ {
xdsl2LineAlarmConfProfileXtucThresh15MinFecs, xdsl2LineAlarmConfProfileXtucThresh15MinFecs,
xdsl2LineAlarmConfProfileXtucThresh15MinEs, xdsl2LineAlarmConfProfileXtucThresh15MinEs,
xdsl2LineAlarmConfProfileXtucThresh15MinSes, xdsl2LineAlarmConfProfileXtucThresh15MinSes,
xdsl2LineAlarmConfProfileXtucThresh15MinLoss, xdsl2LineAlarmConfProfileXtucThresh15MinLoss,
xdsl2LineAlarmConfProfileXtucThresh15MinUas, xdsl2LineAlarmConfProfileXtucThresh15MinUas,
xdsl2LineAlarmConfProfileXturThresh15MinFecs, xdsl2LineAlarmConfProfileXturThresh15MinFecs,
xdsl2LineAlarmConfProfileXturThresh15MinEs, xdsl2LineAlarmConfProfileXturThresh15MinEs,
xdsl2LineAlarmConfProfileXturThresh15MinSes, xdsl2LineAlarmConfProfileXturThresh15MinSes,
xdsl2LineAlarmConfProfileXturThresh15MinLoss, xdsl2LineAlarmConfProfileXturThresh15MinLoss,
xdsl2LineAlarmConfProfileXturThresh15MinUas, xdsl2LineAlarmConfProfileXturThresh15MinUas,
xdsl2LineAlarmConfProfileThresh15MinFailedFullInt, xdsl2LineAlarmConfProfileThresh15MinFailedFullInt,
xdsl2LineAlarmConfProfileThresh15MinFailedShrtInt, xdsl2LineAlarmConfProfileThresh15MinFailedShrtInt,
xdsl2LineAlarmConfProfileRowStatus xdsl2LineAlarmConfProfileRowStatus
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The group of objects in a line alarm profile." "The group of objects in a line alarm profile."
::= { vdsl2Groups 19 } ::= { xdsl2Groups 21 }
vdsl2ChAlarmConfProfileGroup OBJECT-GROUP xdsl2ChAlarmConfProfileGroup OBJECT-GROUP
OBJECTS OBJECTS
{ {
xdsl2ChAlarmConfProfileXtucThresh15MinCodingViolations, xdsl2ChAlarmConfProfileXtucThresh15MinCodingViolations,
xdsl2ChAlarmConfProfileXtucThresh15MinCorrected, xdsl2ChAlarmConfProfileXtucThresh15MinCorrected,
xdsl2ChAlarmConfProfileXturThresh15MinCodingViolations, xdsl2ChAlarmConfProfileXturThresh15MinCodingViolations,
xdsl2ChAlarmConfProfileXturThresh15MinCorrected, xdsl2ChAlarmConfProfileXturThresh15MinCorrected,
xdsl2ChAlarmConfProfileRowStatus xdsl2ChAlarmConfProfileRowStatus
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The group of objects in a channel alarm profile." "The group of objects in a channel alarm profile."
::= { vdsl2Groups 20 } ::= { xdsl2Groups 22 }
vdsl2PMLineCurrGroup OBJECT-GROUP xdsl2PMLineCurrGroup OBJECT-GROUP
OBJECTS OBJECTS
{ {
xdsl2PMLCurr15MValidIntervals, xdsl2PMLCurr15MValidIntervals,
xdsl2PMLCurr15MInvalidIntervals, xdsl2PMLCurr15MInvalidIntervals,
xdsl2PMLCurr15MTimeElapsed, xdsl2PMLCurr15MTimeElapsed,
xdsl2PMLCurr15MFecs, xdsl2PMLCurr15MFecs,
xdsl2PMLCurr15MEs, xdsl2PMLCurr15MEs,
xdsl2PMLCurr15MSes, xdsl2PMLCurr15MSes,
xdsl2PMLCurr15MLoss, xdsl2PMLCurr15MLoss,
xdsl2PMLCurr15MUas, xdsl2PMLCurr15MUas,
skipping to change at page 203, line 51 skipping to change at page 211, line 15
xdsl2PMLCurr1DayFecs, xdsl2PMLCurr1DayFecs,
xdsl2PMLCurr1DayEs, xdsl2PMLCurr1DayEs,
xdsl2PMLCurr1DaySes, xdsl2PMLCurr1DaySes,
xdsl2PMLCurr1DayLoss, xdsl2PMLCurr1DayLoss,
xdsl2PMLCurr1DayUas xdsl2PMLCurr1DayUas
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The group of objects that report the line level "The group of objects that report the line level
counters for current PM intervals." counters for current PM intervals."
::= { vdsl2Groups 21 } ::= { xdsl2Groups 23 }
vdsl2PMLineCurrInitGroup OBJECT-GROUP
xdsl2PMLineCurrInitGroup OBJECT-GROUP
OBJECTS OBJECTS
{ {
xdsl2PMLCurrInit15MValidIntervals, xdsl2PMLCurrInit15MValidIntervals,
xdsl2PMLCurrInit15MInvalidIntervals, xdsl2PMLCurrInit15MInvalidIntervals,
xdsl2PMLCurrInit15MTimeElapsed, xdsl2PMLCurrInit15MTimeElapsed,
xdsl2PMLCurrInit15MFullInits, xdsl2PMLCurrInit15MFullInits,
xdsl2PMLCurrInit15MFailedFullInits, xdsl2PMLCurrInit15MFailedFullInits,
xdsl2PMLCurrInit1DayValidIntervals, xdsl2PMLCurrInit1DayValidIntervals,
xdsl2PMLCurrInit1DayInvalidIntervals, xdsl2PMLCurrInit1DayInvalidIntervals,
xdsl2PMLCurrInit1DayTimeElapsed, xdsl2PMLCurrInit1DayTimeElapsed,
xdsl2PMLCurrInit1DayFullInits, xdsl2PMLCurrInit1DayFullInits,
xdsl2PMLCurrInit1DayFailedFullInits xdsl2PMLCurrInit1DayFailedFullInits
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The group of objects that report the full "The group of objects that report the full
initializations counters for current PM intervals." initializations counters for current PM intervals."
::= { vdsl2Groups 22 } ::= { xdsl2Groups 24 }
vdsl2PMLineCurrInitShortGroup OBJECT-GROUP xdsl2PMLineCurrInitShortGroup OBJECT-GROUP
OBJECTS OBJECTS
{ {
xdsl2PMLCurrInit15MShortInits, xdsl2PMLCurrInit15MShortInits,
xdsl2PMLCurrInit15MFailedShortInits, xdsl2PMLCurrInit15MFailedShortInits,
xdsl2PMLCurrInit1DayShortInits, xdsl2PMLCurrInit1DayShortInits,
xdsl2PMLCurrInit1DayFailedShortInits xdsl2PMLCurrInit1DayFailedShortInits
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The group of objects that report the short "The group of objects that report the short
initializations counters for current PM intervals." initializations counters for current PM intervals."
::= { vdsl2Groups 23 } ::= { xdsl2Groups 25 }
vdsl2PMLineHist15MinGroup OBJECT-GROUP xdsl2PMLineHist15MinGroup OBJECT-GROUP
OBJECTS OBJECTS
{ {
xdsl2PMLHist15MMonitoredTime, xdsl2PMLHist15MMonitoredTime,
xdsl2PMLHist15MFecs, xdsl2PMLHist15MFecs,
xdsl2PMLHist15MEs, xdsl2PMLHist15MEs,
xdsl2PMLHist15MSes, xdsl2PMLHist15MSes,
xdsl2PMLHist15MLoss, xdsl2PMLHist15MLoss,
xdsl2PMLHist15MUas, xdsl2PMLHist15MUas,
xdsl2PMLHist15MValidInterval xdsl2PMLHist15MValidInterval
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The group of line level PM counters for the previous "The group of line level PM counters for the previous
15 minutes intervals." 15 minutes intervals."
::= { vdsl2Groups 24 } ::= { xdsl2Groups 26 }
vdsl2PMLineHist1DayGroup OBJECT-GROUP xdsl2PMLineHist1DayGroup OBJECT-GROUP
OBJECTS OBJECTS
{ {
xdsl2PMLHist1DMonitoredTime, xdsl2PMLHist1DMonitoredTime,
xdsl2PMLHist1DFecs, xdsl2PMLHist1DFecs,
xdsl2PMLHist1DEs, xdsl2PMLHist1DEs,
xdsl2PMLHist1DSes, xdsl2PMLHist1DSes,
xdsl2PMLHist1DLoss, xdsl2PMLHist1DLoss,
xdsl2PMLHist1DUas, xdsl2PMLHist1DUas,
xdsl2PMLHist1DValidInterval xdsl2PMLHist1DValidInterval
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The group of line level PM counters for the previous "The group of line level PM counters for the previous
24 hours intervals." 24 hours intervals."
::= { vdsl2Groups 25 } ::= { xdsl2Groups 27 }
vdsl2PMLineInitHist15MinGroup OBJECT-GROUP xdsl2PMLineInitHist15MinGroup OBJECT-GROUP
OBJECTS OBJECTS
{ {
xdsl2PMLHistInit15MMonitoredTime, xdsl2PMLHistInit15MMonitoredTime,
xdsl2PMLHistInit15MFullInits, xdsl2PMLHistInit15MFullInits,
xdsl2PMLHistInit15MFailedFullInits, xdsl2PMLHistInit15MFailedFullInits,
xdsl2PMLHistInit15MValidInterval xdsl2PMLHistInit15MValidInterval
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The group of PM counters for the previous 15 minutes "The group of PM counters for the previous 15 minutes
intervals full initializations." intervals full initializations."
::= { vdsl2Groups 26 } ::= { xdsl2Groups 28 }
vdsl2PMLineInitHist15MinShortGroup OBJECT-GROUP xdsl2PMLineInitHist15MinShortGroup OBJECT-GROUP
OBJECTS OBJECTS
{ {
xdsl2PMLHistInit15MShortInits, xdsl2PMLHistInit15MShortInits,
xdsl2PMLHistInit15MFailedShortInits xdsl2PMLHistInit15MFailedShortInits
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The group of PM counters for the previous 15 minutes "The group of PM counters for the previous 15 minutes
intervals short initializations." intervals short initializations."
::= { vdsl2Groups 27 } ::= { xdsl2Groups 29 }
vdsl2PMLineInitHist1DayGroup OBJECT-GROUP xdsl2PMLineInitHist1DayGroup OBJECT-GROUP
OBJECTS OBJECTS
{ {
xdsl2PMLHistinit1DMonitoredTime, xdsl2PMLHistinit1DMonitoredTime,
xdsl2PMLHistinit1DFullInits, xdsl2PMLHistinit1DFullInits,
xdsl2PMLHistinit1DFailedFullInits, xdsl2PMLHistinit1DFailedFullInits,
xdsl2PMLHistinit1DValidInterval xdsl2PMLHistinit1DValidInterval
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The group of PM counters for the previous 24 hours "The group of PM counters for the previous 24 hours
intervals full initializations." intervals full initializations."
::= { vdsl2Groups 28 } ::= { xdsl2Groups 30 }
vdsl2PMLineInitHist1DayShortGroup OBJECT-GROUP xdsl2PMLineInitHist1DayShortGroup OBJECT-GROUP
OBJECTS OBJECTS
{ {
xdsl2PMLHistinit1DShortInits, xdsl2PMLHistinit1DShortInits,
xdsl2PMLHistinit1DFailedShortInits xdsl2PMLHistinit1DFailedShortInits
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The group of PM counters for the previous 24 hours "The group of PM counters for the previous 24 hours
intervals short initializations." intervals short initializations."
::= { vdsl2Groups 29 } ::= { xdsl2Groups 31 }
vdsl2PMChCurrGroup OBJECT-GROUP xdsl2PMChCurrGroup OBJECT-GROUP
OBJECTS OBJECTS
{ {
xdsl2PMChCurr15MValidIntervals, xdsl2PMChCurr15MValidIntervals,
xdsl2PMChCurr15MInvalidIntervals, xdsl2PMChCurr15MInvalidIntervals,
xdsl2PMChCurr15MTimeElapsed, xdsl2PMChCurr15MTimeElapsed,
xdsl2PMChCurr15MCodingViolations, xdsl2PMChCurr15MCodingViolations,
xdsl2PMChCurr15MCorrectedBlocks, xdsl2PMChCurr15MCorrectedBlocks,
xdsl2PMChCurr1DayValidIntervals, xdsl2PMChCurr1DayValidIntervals,
xdsl2PMChCurr1DayInvalidIntervals, xdsl2PMChCurr1DayInvalidIntervals,
xdsl2PMChCurr1DayTimeElapsed, xdsl2PMChCurr1DayTimeElapsed,
xdsl2PMChCurr1DayCodingViolations, xdsl2PMChCurr1DayCodingViolations,
xdsl2PMChCurr1DayCorrectedBlocks xdsl2PMChCurr1DayCorrectedBlocks
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The group of objects that report the channel level "The group of objects that report the channel level
counters for current PM intervals." counters for current PM intervals."
::= { vdsl2Groups 30 } ::= { xdsl2Groups 32 }
vdsl2PMChHist15MinGroup OBJECT-GROUP xdsl2PMChHist15MinGroup OBJECT-GROUP
OBJECTS OBJECTS
{ {
xdsl2PMChHist15MMonitoredTime, xdsl2PMChHist15MMonitoredTime,
xdsl2PMChHist15MCodingViolations, xdsl2PMChHist15MCodingViolations,
xdsl2PMChHist15MCorrectedBlocks, xdsl2PMChHist15MCorrectedBlocks,
xdsl2PMChHist15MValidInterval xdsl2PMChHist15MValidInterval
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The group of objects that report the channel level "The group of objects that report the channel level
counters for previous 15 minutes PM intervals." counters for previous 15 minutes PM intervals."
::= { vdsl2Groups 31 } ::= { xdsl2Groups 33 }
vdsl2PMChHist1DGroup OBJECT-GROUP xdsl2PMChHist1DGroup OBJECT-GROUP
OBJECTS OBJECTS
{ {
xdsl2PMChHist1DMonitoredTime, xdsl2PMChHist1DMonitoredTime,
xdsl2PMChHist1DCodingViolations, xdsl2PMChHist1DCodingViolations,
xdsl2PMChHist1DCorrectedBlocks, xdsl2PMChHist1DCorrectedBlocks,
xdsl2PMChHist1DValidInterval xdsl2PMChHist1DValidInterval
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The group of objects that report the channel level "The group of objects that report the channel level
counters for previous 24 hours PM intervals." counters for previous 24 hours PM intervals."
::= { vdsl2Groups 32 } ::= { xdsl2Groups 34 }
vdsl2ScalarSCGroup OBJECT-GROUP xdsl2ScalarSCGroup OBJECT-GROUP
OBJECTS OBJECTS
{ {
xdsl2ScalarSCMaxInterfaces, xdsl2ScalarSCMaxInterfaces,
xdsl2ScalarSCAvailInterfaces xdsl2ScalarSCAvailInterfaces
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The group of objects that report the available memory "The group of objects that report the available memory
resources for DELT processes." resources for DELT processes."
::= { vdsl2Groups 33 } ::= { xdsl2Groups 35 }
xdsl2ThreshNotificationGroup NOTIFICATION-GROUP
vdsl2ThreshNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS NOTIFICATIONS
{ {
xdsl2LinePerfFECSThreshXtuc, xdsl2LinePerfFECSThreshXtuc,
xdsl2LinePerfFECSThreshXtur, xdsl2LinePerfFECSThreshXtur,
xdsl2LinePerfESThreshXtuc, xdsl2LinePerfESThreshXtuc,
xdsl2LinePerfESThreshXtur, xdsl2LinePerfESThreshXtur,
xdsl2LinePerfSESThreshXtuc, xdsl2LinePerfSESThreshXtuc,
xdsl2LinePerfSESThreshXtur, xdsl2LinePerfSESThreshXtur,
xdsl2LinePerfLOSSThreshXtuc, xdsl2LinePerfLOSSThreshXtuc,
xdsl2LinePerfLOSSThreshXtur, xdsl2LinePerfLOSSThreshXtur,
skipping to change at page 208, line 17 skipping to change at page 215, line 29
xdsl2LinePerfCorrectedThreshXtuc, xdsl2LinePerfCorrectedThreshXtuc,
xdsl2LinePerfCorrectedThreshXtur, xdsl2LinePerfCorrectedThreshXtur,
xdsl2LinePerfFailedFullInitThresh, xdsl2LinePerfFailedFullInitThresh,
xdsl2LinePerfFailedShortInitThresh xdsl2LinePerfFailedShortInitThresh
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This group supports notifications of significant "This group supports notifications of significant
conditions conditions
associated with DSL lines." associated with DSL lines."
::= { vdsl2Groups 34 } ::= { xdsl2Groups 36 }
vdsl2StatusChangeNotificationGroup NOTIFICATION-GROUP xdsl2StatusChangeNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS NOTIFICATIONS
{ {
xdsl2LineStatusChangeXtuc, xdsl2LineStatusChangeXtuc,
xdsl2LineStatusChangeXtur xdsl2LineStatusChangeXtur
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This group supports notifications of thresholds crossing "This group supports notifications of thresholds crossing
associated with DSL lines." associated with DSL lines."
::= { vdsl2Groups 35 } ::= { xdsl2Groups 37 }
END END
4. Implementation Analysis 4. Implementation Analysis
A management application intended to manage ADSL links (e.g., A management application intended to manage ADSL links (e.g.,
G.992.1) with this MIB module MUST be modified to adapt itself to G.992.1) with this MIB module MUST be modified to adapt itself to
certain differences between RFC 2662 [RFC2662] and this MIB module, certain differences between RFC 2662 [RFC2662] and this MIB module,
including the following aspects: including the following aspects:
skipping to change at page 209, line 30 skipping to change at page 216, line 39
environment without proper protection can have a negative effect on environment without proper protection can have a negative effect on
network operations. These are the tables and objects and their network operations. These are the tables and objects and their
sensitivity/vulnerability: sensitivity/vulnerability:
o xdsl2LineTable o xdsl2LineTable
The table consists of the following objects that support SET The table consists of the following objects that support SET
operations: operations:
* xdsl2LineCnfgTemplate * xdsl2LineCnfgTemplate
* xdsl2LineCnfgFallbackTemplate
* xdsl2LineAlarmCnfgTemplate * xdsl2LineAlarmCnfgTemplate
* xdsl2LineCmndConfPmsf * xdsl2LineCmndConfPmsf
* xdsl2LineCmndConfLdsf * xdsl2LineCmndConfLdsf
* xdsl2LineCmndConfBpsc * xdsl2LineCmndConfBpsc
* xdsl2LineCmndAutomodeColdStart * xdsl2LineCmndAutomodeColdStart
* xdsl2LineCmndConfReset * xdsl2LineCmndConfReset
Unauthorized changes to xdsl2LineCnfgTemplate could have a major Unauthorized changes to xdsl2LineCnfgTemplate could have a major
adverse operational effect on many lines simultaneously. adverse operational effect on many lines simultaneously.
Unauthorized changes to xdsl2LineCnfgFallbackTemplate could have a
major adverse operational effect on many lines simultaneously.
Unauthorized changes to xdsl2LineAlarmCnfgTemplate could have a Unauthorized changes to xdsl2LineAlarmCnfgTemplate could have a
contrary effect on notifications. contrary effect on notifications.
Unauthorized changes to xdsl2LineCmndConfPmsf could have an Unauthorized changes to xdsl2LineCmndConfPmsf could have an
adverse affect on the power consumption of a line and may disrupt adverse affect on the power consumption of a line and may disrupt
an operational service. an operational service.
Unauthorized changes to xdsl2LineCmndConfLdsf could cause an Unauthorized changes to xdsl2LineCmndConfLdsf could cause an
unscheduled line test to be carried out on the line. unscheduled line test to be carried out on the line.
skipping to change at page 214, line 9 skipping to change at page 221, line 26
* xdsl2ChConfProfMinProtectionUs * xdsl2ChConfProfMinProtectionUs
* xdsl2ChConfProfMinProtection8Ds * xdsl2ChConfProfMinProtection8Ds
* xdsl2ChConfProfMinProtection8Us * xdsl2ChConfProfMinProtection8Us
* xdsl2ChConfProfMaxBerDs * xdsl2ChConfProfMaxBerDs
* xdsl2ChConfProfMaxBerUs * xdsl2ChConfProfMaxBerUs
* xdsl2ChConfProfUsDataRateDs * xdsl2ChConfProfUsDataRateDs
* xdsl2ChConfProfDsDataRateDs * xdsl2ChConfProfDsDataRateDs
* xdsl2ChConfProfUsDataRateUs * xdsl2ChConfProfUsDataRateUs
* xdsl2ChConfProfDsDataRateUs * xdsl2ChConfProfDsDataRateUs
* xdsl2ChConfProfImaEnabled * xdsl2ChConfProfImaEnabled
* xdsl2ChConfProfMaxDelayVar
* xdsl2ChConfProfInitPolicy
* xdsl2ChConfProfRowStatus * xdsl2ChConfProfRowStatus
Unauthorized changes resulting in the setting of any of the above Unauthorized changes resulting in the setting of any of the above
objects to an incorrect value could have an adverse operational objects to an incorrect value could have an adverse operational
effect on several lines. effect on several lines.
Also, unauthorized changes to xdsl2ChConfProfRowStatus could Also, unauthorized changes to xdsl2ChConfProfRowStatus could
result in unwanted channel profiles being created or brought into result in unwanted channel profiles being created or brought into
service prematurely; or could result in channel profiles being service prematurely; or could result in channel profiles being
inadvertently deleted or taken out of service. inadvertently deleted or taken out of service.
skipping to change at page 217, line 41 skipping to change at page 225, line 10
the work on this document. The structure of this document as well as the work on this document. The structure of this document as well as
several paragraphs originate in their document. several paragraphs originate in their document.
Other contributions and advice were received from the following: Other contributions and advice were received from the following:
Randy Presuhn (Mindspring) Randy Presuhn (Mindspring)
Chen Jian (Huawei) Chen Jian (Huawei)
Bert Wijnen (Lucent) Bert Wijnen (Lucent)
Brian Johnson (NEC Australia) Brian Johnson (NEC Australia)
Andrew Cheers (NEC Australia) Andrew Cheers (NEC Australia)
Sedat Akca (NEC Australia)
Victor Sperry (Calix Networks)
Narendranath Nair (wipro)
Uwe Pauluhn (infineon)
John d. Boyle (Alcatel)
Edward Beili (Actelis)
Dan Romascanu (avaya)
7. References 7. References
7.1. Normative References 7.1. Normative References
[G.992.1] "Asymmetric digital subscriber line (ADSL) transceivers", [G.992.1] "Asymmetric digital subscriber line (ADSL) transceivers",
ITU-T G.992.1, 1999. ITU-T G.992.1, 1999.
[G.992.2] "Splitterless asymmetric digital subscriber line (ADSL) [G.992.2] "Splitterless asymmetric digital subscriber line (ADSL)
transceivers", ITU-T G.992.2, 1999. transceivers", ITU-T G.992.2, 1999.
skipping to change at page 218, line 24 skipping to change at page 225, line 46
[G.993.1] "Very-high speed Digital Subscriber Line Transceivers", [G.993.1] "Very-high speed Digital Subscriber Line Transceivers",
ITU-T G.993.1, June 2004. ITU-T G.993.1, June 2004.
[G.993.2] "Very-high speed Digital Subscriber Line Transceivers 2 [G.993.2] "Very-high speed Digital Subscriber Line Transceivers 2
(VDSL2 draft)", ITU-T G.993.2, February 2006. (VDSL2 draft)", ITU-T G.993.2, February 2006.
[G.997.1] "Physical layer management for digital subscriber line [G.997.1] "Physical layer management for digital subscriber line
(DSL) transceivers", ITU-T G.997.1, June 2006. (DSL) transceivers", ITU-T G.997.1, June 2006.
[G.997.1-Am1]
"Physical layer management for digital subscriber line
(DSL) transceivers - Amendment 1", ITU-T G.997.1-
Amendment 1, December 2006.
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119, March 1997. Requirement Levels", BCP 14, RFC 2119, March 1997.
[RFC2578] McCloghrie, K., Ed., Perkins, D., Ed., and J. [RFC2578] McCloghrie, K., Ed., Perkins, D., Ed., and J.
Schoenwaelder, Ed., "Structure of Management Information Schoenwaelder, Ed., "Structure of Management Information
Version 2 (SMIv2)", STD 58, RFC 2578, April 1999. Version 2 (SMIv2)", STD 58, RFC 2578, April 1999.
[RFC2579] McCloghrie, K., Ed., Perkins, D., Ed., and J. [RFC2579] McCloghrie, K., Ed., Perkins, D., Ed., and J.
Schoenwaelder, Ed., "Textual Conventions for SMIv2", Schoenwaelder, Ed., "Textual Conventions for SMIv2",
STD 58, RFC 2579, April 1999. STD 58, RFC 2579, April 1999.
skipping to change at page 221, line 7 skipping to change at page 229, line 7
649-655 Springvale Road 649-655 Springvale Road
Mulgrave, Victoria 3170 Mulgrave, Victoria 3170
Australia Australia
Phone: +61 3 9264 3385 Phone: +61 3 9264 3385
Fax: +61 3 9264 3892 Fax: +61 3 9264 3892
Email: umberto.bonollo@nec.com.au Email: umberto.bonollo@nec.com.au
Full Copyright Statement Full Copyright Statement
Copyright (C) The IETF Trust (2007). Copyright (C) The IETF Trust (2008).
This document is subject to the rights, licenses and restrictions This document is subject to the rights, licenses and restrictions
contained in BCP 78, and except as set forth therein, the authors contained in BCP 78, and except as set forth therein, the authors
retain all their rights. retain all their rights.
This document and the information contained herein are provided on an This document and the information contained herein are provided on an
"AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE REPRESENTS
OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE IETF TRUST AND
THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL WARRANTIES, EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF
 End of changes. 295 change blocks. 
639 lines changed or deleted 1033 lines changed or added

This html diff was produced by rfcdiff 1.34. The latest version is available from http://tools.ietf.org/tools/rfcdiff/