draft-ietf-bridge-bridgemib-smiv2-01.txt   draft-ietf-bridge-bridgemib-smiv2-02.txt 
Internet Draft Editor of this version: Internet Draft Editor of this version:
Expires May 2002 K.C. Norseth Expires August 2002 K.C. Norseth
draft-ietf-bridge-bridgemib-smiv2-01.txt Enterasys Networks draft-ietf-bridge-bridgemib-smiv2-02.txt Enterasys Networks
Obsoletes: 1493 Authors of previous version: Obsoletes: 1493 Authors of previous version:
E. Bell E. Bell
3Com Corp. 3Com Corp.
E. Decker E. Decker
Cisco Systems, Inc. Cisco Systems, Inc.
P. Langille P. Langille
Newbridge Networks Newbridge Networks
A. Rijhsinghani A. Rijhsinghani
Enterasys Networks Enterasys Networks
K. McCloghrie K. McCloghrie
Cisco Systems, Inc. Cisco Systems, Inc.
November 2001 February 2002
Definitions of Managed Objects for Bridges Definitions of Managed Objects for Bridges
Status of this Memo Status of this Memo
This document is an Internet Draft and is in full conformance with This document is an Internet Draft and is in full conformance with
all provisions of Section 10 of RFC2026. Internet Drafts are working all provisions of Section 10 of RFC2026. Internet Drafts are working
documents of the Internet Engineering Task Force (IETF), its Areas, documents of the Internet Engineering Task Force (IETF), its Areas,
and its Working Groups. Note that other groups may also distribute and its Working Groups. Note that other groups may also distribute
working documents as Internet Drafts. working documents as Internet Drafts.
skipping to change at page 1, line 48 skipping to change at page 1, line 47
The list of Internet-Draft Shadow Directories can be accessed at The list of Internet-Draft Shadow Directories can be accessed at
http://www.ietf.org/shadow.html. http://www.ietf.org/shadow.html.
To learn the current status of any Internet-Draft, please check the To learn the current status of any Internet-Draft, please check the
"1id-abstracts.txt" listing contained in the Internet-Drafts Shadow "1id-abstracts.txt" listing contained in the Internet-Drafts Shadow
Directories on ftp.ietf.org (US East Coast), nic.nordu.net (Europe), Directories on ftp.ietf.org (US East Coast), nic.nordu.net (Europe),
ftp.isi.edu (US West Coast), or munnari.oz.au (Pacific Rim). ftp.isi.edu (US West Coast), or munnari.oz.au (Pacific Rim).
Copyright Notice Copyright Notice
Copyright (C) The Internet Society (2001). All Rights Reserved. Copyright (C) The Internet Society (2002). All Rights Reserved.
Abstract Abstract
This memo defines a portion of the Management Information Base (MIB) This memo defines a portion of the Management Information Base (MIB)
for use with network management protocols in TCP/IP based internets. for use with network management protocols in TCP/IP based internets.
In particular it defines objects for managing MAC bridges based on In particular it defines objects for managing MAC bridges based on
the IEEE 802.1D-1990 standard between Local Area Network (LAN) the IEEE 802.1D-1990 standard between Local Area Network (LAN)
segments. Provisions are made for support of transparent bridging. segments. Provisions are made for support of transparent bridging.
Provisions are also made so that these objects apply to bridges Provisions are also made so that these objects apply to bridges
connected by subnetworks other than LAN segments. connected by subnetworks other than LAN segments.
The MIB presented in this memo is a direct translation of the BRIDGE The MIB presented in this memo is a direct translation of the BRIDGE
MIB defined in [RFC1493], to the SMIv2 syntax required for current MIB defined in [RFC1493], to the SMIv2 syntax required for current
IETF MIB standards. This memo obsoletes RFC 1493. IETF MIB standards. This memo obsoletes RFC 1493.
skipping to change at page 7, line 49 skipping to change at page 7, line 48
necessary to accommodate these textual conventions which are adopted necessary to accommodate these textual conventions which are adopted
merely for the convenience of readers. merely for the convenience of readers.
3. Definitions 3. Definitions
BRIDGE-MIB DEFINITIONS ::= BEGIN BRIDGE-MIB DEFINITIONS ::= BEGIN
-- ---------------------------------------------------------- -- -- ---------------------------------------------------------- --
-- MIB for IEEE 802.1D devices -- MIB for IEEE 802.1D devices
-- ---------------------------------------------------------- -- -- ---------------------------------------------------------- --
IMPORTS IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
Counter32, Integer32, TimeTicks, mib-2 Counter32, Integer32, TimeTicks, mib-2
FROM SNMPv2-SMI FROM SNMPv2-SMI
TEXTUAL-CONVENTION, MacAddress TEXTUAL-CONVENTION, MacAddress
FROM SNMPv2-TC FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF FROM SNMPv2-CONF
InterfaceIndex FROM IF-MIB
; ;
bridgeMIB MODULE-IDENTITY bridgeMIB MODULE-IDENTITY
LAST-UPDATED "200111180000Z" LAST-UPDATED "200201310000Z"
ORGANIZATION "IETF Bridge MIB Working Group" ORGANIZATION "IETF Bridge MIB Working Group"
CONTACT-INFO CONTACT-INFO
"Email: Bridge-mib@ietf.org" "Email: Bridge-mib@ietf.org"
DESCRIPTION DESCRIPTION
"The Bridge MIB module for managing devices that support "The Bridge MIB module for managing devices that support
IEEE 802.1D." IEEE 802.1D."
REVISION "200111190000Z"
DESCRIPTION
"Draft 1: 01 version of draft."
REVISION "200106260000Z" REVISION "200106260000Z"
DESCRIPTION DESCRIPTION
"Draft 1: initial translation of RFC 1493 to SMIv2." "Translation of RFC 1493 to SMIv2."
REVISION "199307310000Z" REVISION "199307310000Z"
DESCRIPTION DESCRIPTION
"RFC 1493: SMIv1 version." "RFC 1493: SMIv1 version."
::= { dot1dBridge 8 } ::= { dot1dBridge 8 }
dot1dNotification OBJECT IDENTIFIER ::= { dot1dBridge 0 } dot1dNotification OBJECT IDENTIFIER ::= { dot1dBridge 0 }
-- ---------------------------------------------------------- -- -- ---------------------------------------------------------- --
-- Textual Conventions -- Textual Conventions
-- ---------------------------------------------------------- -- -- ---------------------------------------------------------- --
skipping to change at page 11, line 50 skipping to change at page 11, line 46
REFERENCE REFERENCE
"IEEE 802.1D-1990: Section 6.4.2, 6.6.1" "IEEE 802.1D-1990: Section 6.4.2, 6.6.1"
INDEX { dot1dBasePort } INDEX { dot1dBasePort }
::= { dot1dBasePortTable 1 } ::= { dot1dBasePortTable 1 }
Dot1dBasePortEntry ::= Dot1dBasePortEntry ::=
SEQUENCE { SEQUENCE {
dot1dBasePort dot1dBasePort
Integer32, Integer32,
dot1dBasePortIfIndex dot1dBasePortIfIndex
Integer32, InterfaceIndex,
dot1dBasePortCircuit dot1dBasePortCircuit
OBJECT IDENTIFIER, OBJECT IDENTIFIER,
dot1dBasePortDelayExceededDiscards dot1dBasePortDelayExceededDiscards
Counter32, Counter32,
dot1dBasePortMtuExceededDiscards dot1dBasePortMtuExceededDiscards
Counter32 Counter32
} }
dot1dBasePort OBJECT-TYPE dot1dBasePort OBJECT-TYPE
SYNTAX Integer32 (1..65535) SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The port number of the port for which this entry "The port number of the port for which this entry
contains bridge management information." contains bridge management information."
::= { dot1dBasePortEntry 1 } ::= { dot1dBasePortEntry 1 }
dot1dBasePortIfIndex OBJECT-TYPE dot1dBasePortIfIndex OBJECT-TYPE
SYNTAX InterfaceIndex SYNTAX InterfaceIndex
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The value of the instance of the ifIndex object, "The value of the instance of the ifIndex object,
defined in MIB-II, for the interface corresponding defined in IF-MIB, for the interface corresponding
to this port." to this port."
::= { dot1dBasePortEntry 2 } ::= { dot1dBasePortEntry 2 }
dot1dBasePortCircuit OBJECT-TYPE dot1dBasePortCircuit OBJECT-TYPE
SYNTAX OBJECT IDENTIFIER SYNTAX OBJECT IDENTIFIER
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"For a port which (potentially) has the same value of "For a port which (potentially) has the same value of
skipping to change at page 13, line 53 skipping to change at page 13, line 51
SYNTAX Integer32 (0..65535) SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The value of the write-able portion of the Bridge ID, "The value of the write-able portion of the Bridge ID,
i.e., the first two octets of the (8 octet long) Bridge i.e., the first two octets of the (8 octet long) Bridge
ID. The other (last) 6 octets of the Bridge ID are ID. The other (last) 6 octets of the Bridge ID are
given by the value of dot1dBaseBridgeAddress. given by the value of dot1dBaseBridgeAddress.
Permissible values are 0-61440, in steps of 4096." Permissible values are 0-61440, in steps of 4096."
REFERENCE REFERENCE
" IEEE 802.1t clause 8.10.2, Table 8-4, clause 14.3."" " IEEE 802.1t clause 8.10.2, Table 8-4, clause 14.3."
::= { dot1dStp 2 } ::= { dot1dStp 2 }
dot1dStpTimeSinceTopologyChange OBJECT-TYPE dot1dStpTimeSinceTopologyChange OBJECT-TYPE
SYNTAX TimeTicks SYNTAX TimeTicks
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The time (in hundredths of a second) since the "The time (in hundredths of a second) since the
last time a topology change was detected by the last time a topology change was detected by the
bridge entity. bridge entity.
skipping to change at page 14, line 23 skipping to change at page 14, line 21
" IEEE 802.1w clause 14.8.1.1." " IEEE 802.1w clause 14.8.1.1."
::= { dot1dStp 3 } ::= { dot1dStp 3 }
dot1dStpTopChanges OBJECT-TYPE dot1dStpTopChanges OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The total number of topology changes detected by "The total number of topology changes detected by
this bridge since the management entity was last this bridge since the management entity was last
reset or initialized. reset or initialized."
For RSTP, this reports the count of times that there have
been at least one non-zero tcWhile timer on this Bridge."
REFERENCE REFERENCE
" IEEE 802.1w clause 14.8.1.1." " IEEE 802.1w clause 14.8.1.1."
::= { dot1dStp 4 } ::= { dot1dStp 4 }
dot1dStpDesignatedRoot OBJECT-TYPE dot1dStpDesignatedRoot OBJECT-TYPE
SYNTAX BridgeId SYNTAX BridgeId
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The bridge identifier of the root of the spanning "The bridge identifier of the root of the spanning
skipping to change at page 17, line 48 skipping to change at page 17, line 44
SEQUENCE { SEQUENCE {
dot1dStpPort dot1dStpPort
Integer32, Integer32,
dot1dStpPortPriority dot1dStpPortPriority
Integer32, Integer32,
dot1dStpPortState dot1dStpPortState
INTEGER, INTEGER,
dot1dStpPortEnable dot1dStpPortEnable
INTEGER, INTEGER,
dot1dStpPortPathCost dot1dStpPortPathCost
Integer32, INTEGER,
dot1dStpPortDesignatedRoot dot1dStpPortDesignatedRoot
BridgeId, BridgeId,
dot1dStpPortDesignatedCost dot1dStpPortDesignatedCost
Integer32, Integer32,
dot1dStpPortDesignatedBridge dot1dStpPortDesignatedBridge
BridgeId, BridgeId,
dot1dStpPortDesignatedPort dot1dStpPortDesignatedPort
OCTET STRING, OCTET STRING,
dot1dStpPortForwardTransitions dot1dStpPortForwardTransitions
Counter32 Counter32,
dot1dStpPortPathCost32
Integer32
} }
dot1dStpPort OBJECT-TYPE dot1dStpPort OBJECT-TYPE
SYNTAX Integer32 (1..65535) SYNTAX Integer32 (1..65535)
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The port number of the port for which this entry "The port number of the port for which this entry
contains Spanning Tree Protocol management information." contains Spanning Tree Protocol management information."
REFERENCE REFERENCE
"IEEE 802.1D-1990: Section 6.8.2.1.2" "IEEE 802.1D-1990: Section 6.8.2.1.2"
::= { dot1dStpPortEntry 1 } ::= { dot1dStpPortEntry 1 }
skipping to change at page 18, line 20 skipping to change at page 18, line 17
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The port number of the port for which this entry "The port number of the port for which this entry
contains Spanning Tree Protocol management information." contains Spanning Tree Protocol management information."
REFERENCE REFERENCE
"IEEE 802.1D-1990: Section 6.8.2.1.2" "IEEE 802.1D-1990: Section 6.8.2.1.2"
::= { dot1dStpPortEntry 1 } ::= { dot1dStpPortEntry 1 }
dot1dStpPortPriority OBJECT-TYPE dot1dStpPortPriority OBJECT-TYPE
SYNTAX Integer32 (0..255) SYNTAX Integer32 (0..255)
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The value of the priority field which is contained in "The value of the priority field which is contained in
the first (in network byte order) octet of the (2 octet the first (in network byte order) octet of the (2 octet
long) Port ID. The other octet of the Port ID is given long) Port ID. The other octet of the Port ID is given
by the value of dot1dStpPort. by the value of dot1dStpPort.
Permissible values are 0-240, in steps of 16."
On newer bridges, permissible values are
0-240, in steps of 16."
REFERENCE REFERENCE
" IEEE 802.1t clause 8.10.2, Table 8-4, clause 14.3." " IEEE 802.1t clause 8.10.2, Table 8-4, clause 14.3."
::= { dot1dStpPortEntry 2 } ::= { dot1dStpPortEntry 2 }
dot1dStpPortState OBJECT-TYPE dot1dStpPortState OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
disabled(1), disabled(1),
blocking(2), blocking(2),
listening(3), listening(3),
learning(4), learning(4),
skipping to change at page 19, line 15 skipping to change at page 19, line 16
} }
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The enabled/disabled status of the port." "The enabled/disabled status of the port."
REFERENCE REFERENCE
"IEEE 802.1D-1990: Section 4.5.5.2" "IEEE 802.1D-1990: Section 4.5.5.2"
::= { dot1dStpPortEntry 4 } ::= { dot1dStpPortEntry 4 }
dot1dStpPortPathCost OBJECT-TYPE dot1dStpPortPathCost OBJECT-TYPE
SYNTAX Integer32 (1..65535) SYNTAX INTEGER (1..65535)
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS deprecated
DESCRIPTION DESCRIPTION
"The contribution of this port to the path cost of "The contribution of this port to the path cost of
paths towards the spanning tree root which include paths towards the spanning tree root which include
this port. 802.1D-1990 recommends that the this port. 802.1D-1990 recommends that the
default value of this parameter be in inverse default value of this parameter be in inverse
proportion to the speed of the attached LAN. proportion to the speed of the attached LAN.
The permissible values must be extended to 1-200,000,000."
New implementations should use dot1dStpPortPathCost32"
REFERENCE REFERENCE
" IEEE 802.1t clause 8.10.2, Table 8-5." "IEEE 802.1D-1990: Section 4.5.5.3"
::= { dot1dStpPortEntry 5 } ::= { dot1dStpPortEntry 5 }
dot1dStpPortDesignatedRoot OBJECT-TYPE dot1dStpPortDesignatedRoot OBJECT-TYPE
SYNTAX BridgeId SYNTAX BridgeId
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The unique Bridge Identifier of the Bridge "The unique Bridge Identifier of the Bridge
recorded as the Root in the Configuration BPDUs recorded as the Root in the Configuration BPDUs
transmitted by the Designated Bridge for the transmitted by the Designated Bridge for the
skipping to change at page 20, line 32 skipping to change at page 20, line 35
dot1dStpPortForwardTransitions OBJECT-TYPE dot1dStpPortForwardTransitions OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of times this port has transitioned "The number of times this port has transitioned
from the Learning state to the Forwarding state." from the Learning state to the Forwarding state."
::= { dot1dStpPortEntry 10 } ::= { dot1dStpPortEntry 10 }
dot1dStpPortPathCost32 OBJECT-TYPE
SYNTAX Integer32 (1..200000000)
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The contribution of this port to the path cost of
paths towards the spanning tree root which include
this port. 802.1D-1990 recommends that the
default value of this parameter be in inverse
proportion to the speed of the attached LAN.
The permissible values must be extended to 1-200,000,000.
Replacement for deprecated object dot1dStpPortPathCost"
REFERENCE
" IEEE 802.1t clause 8.10.2, Table 8-5."
::= { dot1dStpPortEntry 11 }
-- ---------------------------------------------------------- -- -- ---------------------------------------------------------- --
-- the dot1dTp group -- the dot1dTp group
-- ---------------------------------------------------------- -- -- ---------------------------------------------------------- --
-- Implementation of the dot1dTp group is optional. It is -- Implementation of the dot1dTp group is optional. It is
-- implemented by those bridges that support the transparent -- implemented by those bridges that support the transparent
-- bridging mode. A transparent or SRT bridge will implement -- bridging mode. A transparent or SRT bridge will implement
-- this group. -- this group.
-- ---------------------------------------------------------- -- -- ---------------------------------------------------------- --
dot1dTpLearnedEntryDiscards OBJECT-TYPE dot1dTpLearnedEntryDiscards OBJECT-TYPE
skipping to change at page 21, line 57 skipping to change at page 22, line 24
dot1dTpFdbAddress dot1dTpFdbAddress
MacAddress, MacAddress,
dot1dTpFdbPort dot1dTpFdbPort
Integer32, Integer32,
dot1dTpFdbStatus dot1dTpFdbStatus
INTEGER INTEGER
} }
dot1dTpFdbAddress OBJECT-TYPE dot1dTpFdbAddress OBJECT-TYPE
SYNTAX MacAddress SYNTAX MacAddress
MAX-ACCESS not-accessible MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A unicast MAC address for which the bridge has "A unicast MAC address for which the bridge has
forwarding and/or filtering information." forwarding and/or filtering information."
REFERENCE REFERENCE
"IEEE 802.1D-1990: Section 3.9.1, 3.9.2" "IEEE 802.1D-1990: Section 3.9.1, 3.9.2"
::= { dot1dTpFdbEntry 1 } ::= { dot1dTpFdbEntry 1 }
dot1dTpFdbPort OBJECT-TYPE dot1dTpFdbPort OBJECT-TYPE
SYNTAX Integer32 SYNTAX Integer32
skipping to change at page 25, line 51 skipping to change at page 26, line 18
ports to which frames received from a specific port and ports to which frames received from a specific port and
containing a specific destination address are allowed to containing a specific destination address are allowed to
be forwarded." be forwarded."
REFERENCE REFERENCE
"IEEE 802.1D-1990: Section 6.7.2" "IEEE 802.1D-1990: Section 6.7.2"
INDEX { dot1dStaticAddress, dot1dStaticReceivePort } INDEX { dot1dStaticAddress, dot1dStaticReceivePort }
::= { dot1dStaticTable 1 } ::= { dot1dStaticTable 1 }
Dot1dStaticEntry ::= Dot1dStaticEntry ::=
SEQUENCE { SEQUENCE {
dot1dStaticAddress dot1dStaticAddress MacAddress,
MacAddress, dot1dStaticReceivePort Integer32,
dot1dStaticReceivePort dot1dStaticAllowedToGoTo OCTET STRING,
Integer32, dot1dStaticStatus INTEGER
dot1dStaticAllowedToGoTo
OCTET STRING,
dot1dStaticStatus
INTEGER
} }
dot1dStaticAddress OBJECT-TYPE dot1dStaticAddress OBJECT-TYPE
SYNTAX MacAddress SYNTAX MacAddress
MAX-ACCESS not-accessible MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The destination MAC address in a frame to which this "The destination MAC address in a frame to which this
entry's filtering information applies. This object can entry's filtering information applies. This object can
take the value of a unicast address, a group address or take the value of a unicast address, a group address or
the broadcast address." the broadcast address."
REFERENCE REFERENCE
"IEEE 802.1D-1990: Section 3.9.1, 3.9.2" "IEEE 802.1D-1990: Section 3.9.1, 3.9.2"
::= { dot1dStaticEntry 1 } ::= { dot1dStaticEntry 1 }
dot1dStaticReceivePort OBJECT-TYPE dot1dStaticReceivePort OBJECT-TYPE
SYNTAX Integer32 (1..65535) SYNTAX Integer32 (0..65535)
MAX-ACCESS not-accessible MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Either the value '0', or the port number of the port "Either the value '0', or the port number of the port
from which a frame must be received in order for this from which a frame must be received in order for this
entry's filtering information to apply. A value of zero entry's filtering information to apply. A value of zero
indicates that this entry applies on all ports of the indicates that this entry applies on all ports of the
bridge for which there is no other applicable entry." bridge for which there is no other applicable entry."
::= { dot1dStaticEntry 2 } ::= { dot1dStaticEntry 2 }
dot1dStaticAllowedToGoTo OBJECT-TYPE dot1dStaticAllowedToGoTo OBJECT-TYPE
SYNTAX OCTET STRING (SIZE (0..512))
SYNTAX OCTET STRING MAX-ACCESS read-create
MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The set of ports to which frames received from a "The set of ports to which frames received from a
specific port and destined for a specific MAC address, specific port and destined for a specific MAC address,
are allowed to be forwarded. Each octet within the are allowed to be forwarded. Each octet within the
value of this object specifies a set of eight ports, value of this object specifies a set of eight ports,
with the first octet specifying ports 1 through 8, the with the first octet specifying ports 1 through 8, the
second octet specifying ports 9 through 16, etc. Within second octet specifying ports 9 through 16, etc. Within
each octet, the most significant bit represents the each octet, the most significant bit represents the
lowest numbered port, and the least significant bit lowest numbered port, and the least significant bit
represents the highest numbered port. Thus, each port represents the highest numbered port. Thus, each port
of the bridge is represented by a single bit within the of the bridge is represented by a single bit within the
value of this object. If that bit has a value of '1' value of this object. If that bit has a value of '1'
then that port is included in the set of ports; the port then that port is included in the set of ports; the port
is not included if its bit has a value of '0'. (Note is not included if its bit has a value of '0'. (Note
that the setting of the bit corresponding to the port that the setting of the bit corresponding to the port
from which a frame is received is irrelevant.) The from which a frame is received is irrelevant.) The
default value of this object is a string of ones of default value of this object is a string of ones of
appropriate length." appropriate length.
This exceeds the minimum required SNMP packet size
supported. This is sufficient to allow the maximum
4096 ports now supported."
::= { dot1dStaticEntry 3 } ::= { dot1dStaticEntry 3 }
dot1dStaticStatus OBJECT-TYPE dot1dStaticStatus OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
other(1), other(1),
invalid(2), invalid(2),
permanent(3), permanent(3),
deleteOnReset(4), deleteOnReset(4),
deleteOnTimeout(5) deleteOnTimeout(5)
} }
MAX-ACCESS read-write MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the status of this entry. "This object indicates the status of this entry.
The default value is permanent(3). The default value is permanent(3).
other(1) - this entry is currently in use but the other(1) - this entry is currently in use but the
conditions under which it will remain so are conditions under which it will remain so are
different from each of the following values. different from each of the following values.
invalid(2) - writing this value to the object invalid(2) - writing this value to the object
removes the corresponding entry. removes the corresponding entry.
permanent(3) - this entry is currently in use and permanent(3) - this entry is currently in use and
skipping to change at page 34, line 32 skipping to change at page 34, line 53
The following chnages have been made from The following chnages have been made from
draft-ietf-bridge-bridgemib-smiv2-00.txt draft-ietf-bridge-bridgemib-smiv2-00.txt
(1) Misc. description refernces to IEEE 802.1d documents (1) Misc. description refernces to IEEE 802.1d documents
(2) dot1dNotificationGroup changed from dot1dTrapGroup (2) dot1dNotificationGroup changed from dot1dTrapGroup
(3) Misc. additions to some descriptions (3) Misc. additions to some descriptions
The following chnages have been made from
draft-ietf-bridge-bridgemib-smiv2-01.txt
(1) corrections to objects that were made not-accessible in the
draft-00 version that were read /read-write in rfc 1493
(2) Misc. additions to some descriptions
8. Authors' Addresses 8. Authors' Addresses
K.C. Norseth K.C. Norseth
Enterasys Networks Enterasys Networks
2691 S. Decker Lake Lane 2691 S. Decker Lake Lane
Salt Lake City, Utah 84119 Salt Lake City, Utah 84119
Phone: +1 801 887 9823 Phone: +1 801 887 9823
Email: knorseth@enterasys.com Email: knorseth@enterasys.com
9. Full Copyright 9. Full Copyright
skipping to change at page 35, line 36 skipping to change at page 36, line 25
2.2 Relationship to Other MIBs ................................. 6 2.2 Relationship to Other MIBs ................................. 6
2.2.1 Relationship to the 'system' group ....................... 6 2.2.1 Relationship to the 'system' group ....................... 6
2.2.2 Relationship to the 'interfaces' group ................... 6 2.2.2 Relationship to the 'interfaces' group ................... 6
2.3 Textual Conventions ........................................ 7 2.3 Textual Conventions ........................................ 7
3 Definitions .................................................. 7 3 Definitions .................................................. 7
4 Security Considerations ...................................... 32 4 Security Considerations ...................................... 32
5 Acknowledgments .............................................. 32 5 Acknowledgments .............................................. 32
6 References ................................................... 33 6 References ................................................... 33
7 Changes from RFC 1493 and Previous Drafts .................... 34 7 Changes from RFC 1493 and Previous Drafts .................... 34
8 Authors' Addresses ........................................... 34 8 Authors' Addresses ........................................... 34
9 Full Copyright ............................................... 34 9 Full Copyright ............................................... 35
 End of changes. 

This html diff was produced by rfcdiff 1.23, available from http://www.levkowetz.com/ietf/tools/rfcdiff/