draft-ietf-bridge-ext-v2-05.txt   draft-ietf-bridge-ext-v2-06.txt 
Internet Draft V. Ngai Internet Draft V. Ngai
Expires December 2005 Enterasys Networks Expires February 2006 Enterasys Networks
draft-ietf-bridge-ext-v2-05.txt L. Bell draft-ietf-bridge-ext-v2-06.txt L. Bell
Obsoletes: RFC 2674 3Com Corp. Obsoletes: RFC 2674 3Com Corp.
June 2005 August 2005
Definitions of Managed Objects for Bridges with Traffic Definitions of Managed Objects for Bridges with Traffic
Classes, Multicast Filtering and Virtual LAN Extensions Classes, Multicast Filtering and Virtual LAN Extensions
Status of this Memo Status of this Memo
By submitting this Internet-Draft, each author represents that any By submitting this Internet-Draft, each author represents that any
applicable patent or other IPR claims of which he or she is aware applicable patent or other IPR claims of which he or she is aware
have been or will be disclosed, and any of which he or she becomes have been or will be disclosed, and any of which he or she becomes
aware will be disclosed, in accordance with Section 6 of BCP 79. aware will be disclosed, in accordance with Section 6 of BCP 79.
skipping to change at page 3, line 40 skipping to change at page 3, line 39
3.4.2.1 Layering Model ......................................... 16 3.4.2.1 Layering Model ......................................... 16
3.4.2.2 ifStackTable ........................................... 17 3.4.2.2 ifStackTable ........................................... 17
3.4.2.3 ifRcvAddressTable ...................................... 17 3.4.2.3 ifRcvAddressTable ...................................... 17
3.4.3 Relationship to the BRIDGE-MIB ........................... 17 3.4.3 Relationship to the BRIDGE-MIB ........................... 17
3.4.3.1 The dot1dBase Subtree .................................. 18 3.4.3.1 The dot1dBase Subtree .................................. 18
3.4.3.2 The dot1dStp Subtree ................................... 18 3.4.3.2 The dot1dStp Subtree ................................... 18
3.4.3.3 The dot1dTp Subtree .................................... 18 3.4.3.3 The dot1dTp Subtree .................................... 18
3.4.3.4 The dot1dStatic Subtree ................................ 19 3.4.3.4 The dot1dStatic Subtree ................................ 19
3.4.3.5 Additions to the BRIDGE-MIB ............................ 19 3.4.3.5 Additions to the BRIDGE-MIB ............................ 19
4 Definitions for Extended Bridge MIB .......................... 20 4 Definitions for Extended Bridge MIB .......................... 20
5 Definitions for Virtual Bridge MIB ........................... 44 5 Definitions for Virtual Bridge MIB ........................... 45
6 Acknowledgments .............................................. 94 6 Acknowledgments .............................................. 96
7 IANA Considerations .......................................... 94 7 IANA Considerations .......................................... 96
8 Security Considerations ...................................... 94 8 Security Considerations ...................................... 96
9 Normative References ......................................... 97 9 Normative References ......................................... 99
10 Informative References ...................................... 98 10 Informative References ...................................... 100
11 Contact Information ......................................... 99 11 Contact Information ......................................... 101
Appendix A. Email from Tony Jeffrey from IEEE .................. 101 Appendix A. Email from Tony Jeffrey from IEEE .................. 103
Copyright Statement ........................................... 101 Copyright Statement ........................................... 103
Disclaimer of Validity ........................................ 101 Disclaimer of Validity ........................................ 103
1. The Internet-Standard Management Framework 1. The Internet-Standard Management Framework
For a detailed overview of the documents that describe the current For a detailed overview of the documents that describe the current
Internet-Standard Management Framework, please refer to section 7 of Internet-Standard Management Framework, please refer to section 7 of
RFC 3410 [RFC3410]. RFC 3410 [RFC3410].
Managed objects are accessed via a virtual information store, termed Managed objects are accessed via a virtual information store, termed
the Management Information Base or MIB. MIB objects are generally the Management Information Base or MIB. MIB objects are generally
accessed through the Simple Network Management Protocol (SNMP). accessed through the Simple Network Management Protocol (SNMP).
skipping to change at page 20, line 25 skipping to change at page 20, line 25
FROM SNMPv2-SMI FROM SNMPv2-SMI
TruthValue, TimeInterval, MacAddress, TEXTUAL-CONVENTION TruthValue, TimeInterval, MacAddress, TEXTUAL-CONVENTION
FROM SNMPv2-TC FROM SNMPv2-TC
MODULE-COMPLIANCE, OBJECT-GROUP MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF FROM SNMPv2-CONF
dot1dTp, dot1dTpPort, dot1dBridge, dot1dTp, dot1dTpPort, dot1dBridge,
dot1dBasePortEntry, dot1dBasePort dot1dBasePortEntry, dot1dBasePort
FROM BRIDGE-MIB; FROM BRIDGE-MIB;
pBridgeMIB MODULE-IDENTITY pBridgeMIB MODULE-IDENTITY
LAST-UPDATED "200412130000Z" LAST-UPDATED "200507290000Z"
ORGANIZATION "IETF Bridge MIB Working Group" ORGANIZATION "IETF Bridge MIB Working Group"
CONTACT-INFO CONTACT-INFO
"Email: bridge-mib@ietf.org "Email: bridge-mib@ietf.org
ietfmibs@ops.ietf.org ietfmibs@ops.ietf.org
Les Bell Les Bell
Postal: 3Com Europe Ltd. Postal: 3Com Europe Ltd.
3Com Centre, Boundary Way 3Com Centre, Boundary Way
Hemel Hempstead, Herts. HP2 7YU Hemel Hempstead, Herts. HP2 7YU
UK UK
skipping to change at page 21, line 41 skipping to change at page 21, line 41
and Multicast Filtering, defined by IEEE 802.1D-1998, and Multicast Filtering, defined by IEEE 802.1D-1998,
including Restricted Group Registration defined by including Restricted Group Registration defined by
IEEE 802.1t-2001. IEEE 802.1t-2001.
Copyright (C) The Internet Society (2005). This version of Copyright (C) The Internet Society (2005). This version of
this MIB module is part of RFC XXXX; See the RFC itself for this MIB module is part of RFC XXXX; See the RFC itself for
full legal notices." full legal notices."
-- NOTE to RFC editor: replace XXXX with actual RFC number -- NOTE to RFC editor: replace XXXX with actual RFC number
-- for this document and remove this note -- for this document and remove this note
REVISION "200412130000Z" REVISION "200507290000Z"
DESCRIPTION DESCRIPTION
"Added dot1dPortRestrictedGroupRegistration. "Added dot1dPortRestrictedGroupRegistration.
Deprecated pBridgePortGmrpGroup and pBridgeCompliance Deprecated pBridgePortGmrpGroup and pBridgeCompliance
and added pBridgePortGmrpGroup2 and pBridgeCompliance2." and added pBridgePortGmrpGroup2 and pBridgeCompliance2."
REVISION "199908250000Z" REVISION "199908250000Z"
DESCRIPTION DESCRIPTION
"The Bridge MIB Extension module for managing Priority "The Bridge MIB Extension module for managing Priority
and Multicast Filtering, defined by IEEE 802.1D-1998. and Multicast Filtering, defined by IEEE 802.1D-1998.
skipping to change at page 23, line 46 skipping to change at page 23, line 46
IEEE 802.1Q/D11 Section 5.2, 12.10.1.1.3/b/2" IEEE 802.1Q/D11 Section 5.2, 12.10.1.1.3/b/2"
::= { dot1dExtBase 1 } ::= { dot1dExtBase 1 }
dot1dTrafficClassesEnabled OBJECT-TYPE dot1dTrafficClassesEnabled OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The value true(1) indicates that Traffic Classes are "The value true(1) indicates that Traffic Classes are
enabled on this bridge. When false(2), the bridge enabled on this bridge. When false(2), the bridge
operates with a single priority level for all traffic." operates with a single priority level for all traffic.
The value of this object MUST be retained across
reinitializations of the management system."
DEFVAL { true } DEFVAL { true }
::= { dot1dExtBase 2 } ::= { dot1dExtBase 2 }
dot1dGmrpStatus OBJECT-TYPE dot1dGmrpStatus OBJECT-TYPE
SYNTAX EnabledStatus SYNTAX EnabledStatus
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The administrative status requested by management for "The administrative status requested by management for
GMRP. The value enabled(1) indicates that GMRP should GMRP. The value enabled(1) indicates that GMRP should
be enabled on this device, in all VLANs, on all ports be enabled on this device, in all VLANs, on all ports
for which it has not been specifically disabled. When for which it has not been specifically disabled. When
disabled(2), GMRP is disabled, in all VLANs, on all disabled(2), GMRP is disabled, in all VLANs, on all
ports and all GMRP packets will be forwarded ports and all GMRP packets will be forwarded
transparently. This object affects both Applicant and transparently. This object affects both Applicant and
Registrar state machines. A transition from disabled(2) Registrar state machines. A transition from disabled(2)
to enabled(1) will cause a reset of all GMRP state to enabled(1) will cause a reset of all GMRP state
machines on all ports." machines on all ports.
The value of this object MUST be retained across
reinitializations of the management system."
DEFVAL { enabled } DEFVAL { enabled }
::= { dot1dExtBase 3 } ::= { dot1dExtBase 3 }
-- ------------------------------------------------------------- -- -------------------------------------------------------------
-- Port Capabilities Table -- Port Capabilities Table
-- ------------------------------------------------------------- -- -------------------------------------------------------------
dot1dPortCapabilitiesTable OBJECT-TYPE dot1dPortCapabilitiesTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dot1dPortCapabilitiesEntry SYNTAX SEQUENCE OF Dot1dPortCapabilitiesEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
skipping to change at page 26, line 30 skipping to change at page 26, line 35
Integer32 Integer32
} }
dot1dPortDefaultUserPriority OBJECT-TYPE dot1dPortDefaultUserPriority OBJECT-TYPE
SYNTAX Integer32 (0..7) SYNTAX Integer32 (0..7)
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The default ingress User Priority for this port. This "The default ingress User Priority for this port. This
only has effect on media, such as Ethernet, that do not only has effect on media, such as Ethernet, that do not
support native User Priority." support native User Priority.
The value of this object MUST be retained across
reinitializations of the management system."
::= { dot1dPortPriorityEntry 1 } ::= { dot1dPortPriorityEntry 1 }
dot1dPortNumTrafficClasses OBJECT-TYPE dot1dPortNumTrafficClasses OBJECT-TYPE
SYNTAX Integer32 (1..8) SYNTAX Integer32 (1..8)
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of egress traffic classes supported on this "The number of egress traffic classes supported on this
port. This object may optionally be read-only." port. This object may optionally be read-only.
The value of this object MUST be retained across
reinitializations of the management system."
::= { dot1dPortPriorityEntry 2 } ::= { dot1dPortPriorityEntry 2 }
-- ------------------------------------------------------------- -- -------------------------------------------------------------
-- User Priority Regeneration Table -- User Priority Regeneration Table
-- ------------------------------------------------------------- -- -------------------------------------------------------------
dot1dUserPriorityRegenTable OBJECT-TYPE dot1dUserPriorityRegenTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dot1dUserPriorityRegenEntry SYNTAX SEQUENCE OF Dot1dUserPriorityRegenEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
skipping to change at page 27, line 46 skipping to change at page 28, line 12
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The User Priority for a frame received on this port." "The User Priority for a frame received on this port."
::= { dot1dUserPriorityRegenEntry 1 } ::= { dot1dUserPriorityRegenEntry 1 }
dot1dRegenUserPriority OBJECT-TYPE dot1dRegenUserPriority OBJECT-TYPE
SYNTAX Integer32 (0..7) SYNTAX Integer32 (0..7)
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The Regenerated User Priority the incoming User "The Regenerated User Priority that the incoming User
Priority is mapped to for this port." Priority is mapped to for this port.
The value of this object MUST be retained across
reinitializations of the management system."
::= { dot1dUserPriorityRegenEntry 2 } ::= { dot1dUserPriorityRegenEntry 2 }
-- ------------------------------------------------------------- -- -------------------------------------------------------------
-- Traffic Class Table -- Traffic Class Table
-- ------------------------------------------------------------- -- -------------------------------------------------------------
dot1dTrafficClassTable OBJECT-TYPE dot1dTrafficClassTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dot1dTrafficClassEntry SYNTAX SEQUENCE OF Dot1dTrafficClassEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
skipping to change at page 29, line 15 skipping to change at page 29, line 30
For untagged frames received from non-Ethernet media, For untagged frames received from non-Ethernet media,
this value is equal to the dot1dRegenUserPriority value this value is equal to the dot1dRegenUserPriority value
for the ingress port and media-specific user priority." for the ingress port and media-specific user priority."
::= { dot1dTrafficClassEntry 1 } ::= { dot1dTrafficClassEntry 1 }
dot1dTrafficClass OBJECT-TYPE dot1dTrafficClass OBJECT-TYPE
SYNTAX Integer32 (0..7) SYNTAX Integer32 (0..7)
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The Traffic Class the received frame is mapped to." "The Traffic Class the received frame is mapped to.
The value of this object MUST be retained across
reinitializations of the management system."
::= { dot1dTrafficClassEntry 2 } ::= { dot1dTrafficClassEntry 2 }
-- ------------------------------------------------------------- -- -------------------------------------------------------------
-- Outbound Access Priority Table -- Outbound Access Priority Table
-- ------------------------------------------------------------- -- -------------------------------------------------------------
dot1dPortOutboundAccessPriorityTable OBJECT-TYPE dot1dPortOutboundAccessPriorityTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dot1dPortOutboundAccessPriorityEntry SYNTAX SEQUENCE OF Dot1dPortOutboundAccessPriorityEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
skipping to change at page 31, line 7 skipping to change at page 31, line 26
TimeInterval, TimeInterval,
dot1dPortGarpLeaveAllTime dot1dPortGarpLeaveAllTime
TimeInterval TimeInterval
} }
dot1dPortGarpJoinTime OBJECT-TYPE dot1dPortGarpJoinTime OBJECT-TYPE
SYNTAX TimeInterval SYNTAX TimeInterval
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The GARP Join time, in centiseconds." "The GARP Join time, in centiseconds.
The value of this object MUST be retained across
reinitializations of the management system."
DEFVAL { 20 } DEFVAL { 20 }
::= { dot1dPortGarpEntry 1 } ::= { dot1dPortGarpEntry 1 }
dot1dPortGarpLeaveTime OBJECT-TYPE dot1dPortGarpLeaveTime OBJECT-TYPE
SYNTAX TimeInterval SYNTAX TimeInterval
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The GARP Leave time, in centiseconds." "The GARP Leave time, in centiseconds.
The value of this object MUST be retained across
reinitializations of the management system."
DEFVAL { 60 } DEFVAL { 60 }
::= { dot1dPortGarpEntry 2 } ::= { dot1dPortGarpEntry 2 }
dot1dPortGarpLeaveAllTime OBJECT-TYPE dot1dPortGarpLeaveAllTime OBJECT-TYPE
SYNTAX TimeInterval SYNTAX TimeInterval
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The GARP LeaveAll time, in centiseconds." "The GARP LeaveAll time, in centiseconds.
The value of this object MUST be retained across
reinitializations of the management system."
DEFVAL { 1000 } DEFVAL { 1000 }
::= { dot1dPortGarpEntry 3 } ::= { dot1dPortGarpEntry 3 }
-- ------------------------------------------------------------- -- -------------------------------------------------------------
-- The GMRP Port Configuration and Status Table -- The GMRP Port Configuration and Status Table
-- ------------------------------------------------------------- -- -------------------------------------------------------------
dot1dPortGmrpTable OBJECT-TYPE dot1dPortGmrpTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dot1dPortGmrpEntry SYNTAX SEQUENCE OF Dot1dPortGmrpEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
skipping to change at page 32, line 34 skipping to change at page 33, line 16
in all VLANs as long as dot1dGmrpStatus is also enabled(1). in all VLANs as long as dot1dGmrpStatus is also enabled(1).
A value of disabled(2) indicates that GMRP is disabled on A value of disabled(2) indicates that GMRP is disabled on
this port in all VLANs: any GMRP packets received will this port in all VLANs: any GMRP packets received will
be silently discarded and no GMRP registrations will be be silently discarded and no GMRP registrations will be
propagated from other ports. Setting this to a value of propagated from other ports. Setting this to a value of
enabled(1) will be stored by the agent but will only take enabled(1) will be stored by the agent but will only take
effect on the GMRP protocol operation if dot1dGmrpStatus effect on the GMRP protocol operation if dot1dGmrpStatus
also indicates the value enabled(1). This object affects also indicates the value enabled(1). This object affects
all GMRP Applicant and Registrar state machines on this all GMRP Applicant and Registrar state machines on this
port. A transition from disabled(2) to enabled(1) will port. A transition from disabled(2) to enabled(1) will
cause a reset of all GMRP state machines on this port." cause a reset of all GMRP state machines on this port.
The value of this object MUST be retained across
reinitializations of the management system."
DEFVAL { enabled } DEFVAL { enabled }
::= { dot1dPortGmrpEntry 1 } ::= { dot1dPortGmrpEntry 1 }
dot1dPortGmrpFailedRegistrations OBJECT-TYPE dot1dPortGmrpFailedRegistrations OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The total number of failed GMRP registrations, for any "The total number of failed GMRP registrations, for any
reason, in all VLANs, on this port." reason, in all VLANs, on this port."
skipping to change at page 33, line 19 skipping to change at page 34, line 5
dot1dPortRestrictedGroupRegistration OBJECT-TYPE dot1dPortRestrictedGroupRegistration OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The state of Restricted Group Registration on this port. "The state of Restricted Group Registration on this port.
If the value of this control is true(1), then creation If the value of this control is true(1), then creation
of a new dynamic entry is permitted only if there is a of a new dynamic entry is permitted only if there is a
Static Filtering Entry for the VLAN concerned, in which Static Filtering Entry for the VLAN concerned, in which
the Registrar Administrative Control value is Normal the Registrar Administrative Control value is Normal
Registration." Registration.
The value of this object MUST be retained across
reinitializations of the management system."
REFERENCE REFERENCE
"IEEE 802.1t clause 10.3.2.3, 14.10.1.3." "IEEE 802.1t clause 10.3.2.3, 14.10.1.3."
DEFVAL { false } DEFVAL { false }
::= { dot1dPortGmrpEntry 4 } ::= { dot1dPortGmrpEntry 4 }
-- ------------------------------------------------------------- -- -------------------------------------------------------------
-- High Capacity Port Table for Transparent Bridges -- High Capacity Port Table for Transparent Bridges
-- ------------------------------------------------------------- -- -------------------------------------------------------------
dot1dTpHCPortTable OBJECT-TYPE dot1dTpHCPortTable OBJECT-TYPE
skipping to change at page 44, line 38 skipping to change at page 45, line 31
MODULE-COMPLIANCE, OBJECT-GROUP MODULE-COMPLIANCE, OBJECT-GROUP
FROM SNMPv2-CONF FROM SNMPv2-CONF
dot1dBridge, dot1dBasePortEntry, dot1dBasePort dot1dBridge, dot1dBasePortEntry, dot1dBasePort
FROM BRIDGE-MIB FROM BRIDGE-MIB
EnabledStatus EnabledStatus
FROM P-BRIDGE-MIB FROM P-BRIDGE-MIB
TimeFilter TimeFilter
FROM RMON2-MIB; FROM RMON2-MIB;
qBridgeMIB MODULE-IDENTITY qBridgeMIB MODULE-IDENTITY
LAST-UPDATED "200412130000Z" LAST-UPDATED "200507290000Z"
ORGANIZATION "IETF Bridge MIB Working Group" ORGANIZATION "IETF Bridge MIB Working Group"
CONTACT-INFO CONTACT-INFO
"Email: Bridge-mib@ietf.org "Email: Bridge-mib@ietf.org
ietfmibs@ops.ietf.org ietfmibs@ops.ietf.org
Les Bell Les Bell
Postal: 3Com Europe Ltd. Postal: 3Com Europe Ltd.
3Com Centre, Boundary Way 3Com Centre, Boundary Way
Hemel Hempstead, Herts. HP2 7YU Hemel Hempstead, Herts. HP2 7YU
UK UK
skipping to change at page 46, line 7 skipping to change at page 46, line 43
including Restricted Vlan Registration defined by including Restricted Vlan Registration defined by
IEEE 802.1u-2001 and Vlan Classification defined by IEEE 802.1u-2001 and Vlan Classification defined by
IEEE 802.1v-2001. IEEE 802.1v-2001.
Copyright (C) The Internet Society (2005). This version of Copyright (C) The Internet Society (2005). This version of
this MIB module is part of RFC XXXX; See the RFC itself for this MIB module is part of RFC XXXX; See the RFC itself for
full legal notices." full legal notices."
-- NOTE to RFC editor: replace XXXX with actual RFC number -- NOTE to RFC editor: replace XXXX with actual RFC number
-- for this document and remove this note -- for this document and remove this note
REVISION "200412130000Z" REVISION "200507290000Z"
DESCRIPTION DESCRIPTION
"Added Vlan TEXTUAL-CONVENTIONs, "Added Vlan TEXTUAL-CONVENTIONs,
dot1qPortRestrictedVlanRegistration, dot1vProtocol subtree, dot1qPortRestrictedVlanRegistration, dot1vProtocol subtree,
qBridgeClassificationDeviceGroup, qBridgePortGroup2, qBridgeClassificationDeviceGroup, qBridgePortGroup2,
qBridgeClassificationPortGroup, and qBridgeCompliance2. qBridgeClassificationPortGroup, and qBridgeCompliance2.
Clarified dot1qForwardAllStaticPorts, Clarified dot1qForwardAllStaticPorts,
qPortAcceptableFrameTypes, and qBridgeCompliance. qPortAcceptableFrameTypes, and qBridgeCompliance.
Deprecated qBridgePortGroup and qBridgeCompliance. " Deprecated qBridgePortGroup and qBridgeCompliance. "
REVISION "199908250000Z" REVISION "199908250000Z"
skipping to change at page 50, line 9 skipping to change at page 50, line 45
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The administrative status requested by management for "The administrative status requested by management for
GVRP. The value enabled(1) indicates that GVRP should GVRP. The value enabled(1) indicates that GVRP should
be enabled on this device, on all ports for which it has be enabled on this device, on all ports for which it has
not been specifically disabled. When disabled(2), GVRP not been specifically disabled. When disabled(2), GVRP
is disabled on all ports and all GVRP packets will be is disabled on all ports and all GVRP packets will be
forwarded transparently. This object affects all GVRP forwarded transparently. This object affects all GVRP
Applicant and Registrar state machines. A transition Applicant and Registrar state machines. A transition
from disabled(2) to enabled(1) will cause a reset of all from disabled(2) to enabled(1) will cause a reset of all
GVRP state machines on all ports." GVRP state machines on all ports.
The value of this object MUST be retained across
reinitializations of the management system."
DEFVAL { enabled } DEFVAL { enabled }
::= { dot1qBase 5 } ::= { dot1qBase 5 }
-- ------------------------------------------------------------- -- -------------------------------------------------------------
-- the dot1qTp subtree -- the dot1qTp subtree
-- ------------------------------------------------------------- -- -------------------------------------------------------------
-- ------------------------------------------------------------- -- -------------------------------------------------------------
-- the current Filtering Database Table -- the current Filtering Database Table
-- ------------------------------------------------------------- -- -------------------------------------------------------------
skipping to change at page 56, line 38 skipping to change at page 57, line 31
forwarded. Ports entered in this list will also appear forwarded. Ports entered in this list will also appear
in the complete set shown by dot1qForwardAllPorts. This in the complete set shown by dot1qForwardAllPorts. This
value will be restored after the device is reset. This value will be restored after the device is reset. This
only applies to ports that are members of the VLAN, only applies to ports that are members of the VLAN,
defined by dot1qVlanCurrentEgressPorts. A port may not defined by dot1qVlanCurrentEgressPorts. A port may not
be added in this set if it is already a member of the be added in this set if it is already a member of the
set of ports in dot1qForwardAllForbiddenPorts. The set of ports in dot1qForwardAllForbiddenPorts. The
default value is a string of ones of appropriate length, default value is a string of ones of appropriate length,
to indicate the standard behaviour of using basic to indicate the standard behaviour of using basic
filtering services, i.e. forward all multicasts to all filtering services, i.e. forward all multicasts to all
ports." ports.
The value of this object MUST be retained across
reinitializations of the management system."
::= { dot1qForwardAllEntry 2 } ::= { dot1qForwardAllEntry 2 }
dot1qForwardAllForbiddenPorts OBJECT-TYPE dot1qForwardAllForbiddenPorts OBJECT-TYPE
SYNTAX PortList SYNTAX PortList
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The set of ports configured by management in this VLAN "The set of ports configured by management in this VLAN
for which the Service Requirement attribute Forward All for which the Service Requirement attribute Forward All
Multicast Groups may not be dynamically registered by Multicast Groups may not be dynamically registered by
GMRP. This value will be restored after the device is GMRP. This value will be restored after the device is
reset. A port may not be added in this set if it is reset. A port may not be added in this set if it is
already a member of the set of ports in already a member of the set of ports in
dot1qForwardAllStaticPorts. The default value is a dot1qForwardAllStaticPorts. The default value is a
string of zeros of appropriate length." string of zeros of appropriate length.
The value of this object MUST be retained across
reinitializations of the management system."
::= { dot1qForwardAllEntry 3 } ::= { dot1qForwardAllEntry 3 }
dot1qForwardUnregisteredTable OBJECT-TYPE dot1qForwardUnregisteredTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dot1qForwardUnregisteredEntry SYNTAX SEQUENCE OF Dot1qForwardUnregisteredEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A table containing forwarding information for each "A table containing forwarding information for each
VLAN, specifying the set of ports to which forwarding of VLAN, specifying the set of ports to which forwarding of
multicast group-addressed frames for which there is no multicast group-addressed frames for which there is no
skipping to change at page 58, line 32 skipping to change at page 59, line 30
VLAN, to which multicast group-addressed frames for VLAN, to which multicast group-addressed frames for
which there is no more specific forwarding information which there is no more specific forwarding information
are to be forwarded. Ports entered in this list will are to be forwarded. Ports entered in this list will
also appear in the complete set shown by also appear in the complete set shown by
dot1qForwardUnregisteredPorts. This value will be dot1qForwardUnregisteredPorts. This value will be
restored after the device is reset. A port may not be restored after the device is reset. A port may not be
added in this set if it is already a member of the set added in this set if it is already a member of the set
of ports in dot1qForwardUnregisteredForbiddenPorts. The of ports in dot1qForwardUnregisteredForbiddenPorts. The
default value is a string of zeros of appropriate default value is a string of zeros of appropriate
length, although this has no effect with the default length, although this has no effect with the default
value of dot1qForwardAllStaticPorts." value of dot1qForwardAllStaticPorts.
The value of this object MUST be retained across
reinitializations of the management system."
::= { dot1qForwardUnregisteredEntry 2 } ::= { dot1qForwardUnregisteredEntry 2 }
dot1qForwardUnregisteredForbiddenPorts OBJECT-TYPE dot1qForwardUnregisteredForbiddenPorts OBJECT-TYPE
SYNTAX PortList SYNTAX PortList
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The set of ports configured by management in this VLAN "The set of ports configured by management in this VLAN
for which the Service Requirement attribute Forward for which the Service Requirement attribute Forward
Unregistered Multicast Groups may not be dynamically Unregistered Multicast Groups may not be dynamically
registered by GMRP. This value will be restored after registered by GMRP. This value will be restored after
the device is reset. A port may not be added in this the device is reset. A port may not be added in this
set if it is already a member of the set of ports in set if it is already a member of the set of ports in
dot1qForwardUnregisteredStaticPorts. The default value dot1qForwardUnregisteredStaticPorts. The default value
is a string of zeros of appropriate length." is a string of zeros of appropriate length.
The value of this object MUST be retained across
reinitializations of the management system."
::= { dot1qForwardUnregisteredEntry 3 } ::= { dot1qForwardUnregisteredEntry 3 }
-- ------------------------------------------------------------- -- -------------------------------------------------------------
-- The Static (Destination-Address Filtering) Database -- The Static (Destination-Address Filtering) Database
-- ------------------------------------------------------------- -- -------------------------------------------------------------
dot1qStaticUnicastTable OBJECT-TYPE dot1qStaticUnicastTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dot1qStaticUnicastEntry SYNTAX SEQUENCE OF Dot1qStaticUnicastEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
skipping to change at page 61, line 4 skipping to change at page 62, line 7
"The set of ports for which a frame with a specific "The set of ports for which a frame with a specific
unicast address will be flooded in the event that it unicast address will be flooded in the event that it
has not been learned. It also specifies the set of has not been learned. It also specifies the set of
ports a specific unicast address may be dynamically ports a specific unicast address may be dynamically
learnt on. The dot1qTpFdbTable will have an equivalent learnt on. The dot1qTpFdbTable will have an equivalent
entry with a dot1qTpFdbPort value of '0' until this entry with a dot1qTpFdbPort value of '0' until this
address has been learnt, when it will be updated with address has been learnt, when it will be updated with
the port the address has been seen on. This only the port the address has been seen on. This only
applies to ports that are members of the VLAN, defined applies to ports that are members of the VLAN, defined
by dot1qVlanCurrentEgressPorts. The default value of by dot1qVlanCurrentEgressPorts. The default value of
this object is a string of ones of appropriate length." this object is a string of ones of appropriate length.
The value of this object MUST be retained across
reinitializations of the management system."
REFERENCE REFERENCE
"IEEE 802.1Q/D11 Table 8-5, ISO/IEC 15802-3 Table 7-5" "IEEE 802.1Q/D11 Table 8-5, ISO/IEC 15802-3 Table 7-5"
::= { dot1qStaticUnicastEntry 3 } ::= { dot1qStaticUnicastEntry 3 }
dot1qStaticUnicastStatus OBJECT-TYPE dot1qStaticUnicastStatus OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
other(1), other(1),
invalid(2), invalid(2),
permanent(3), permanent(3),
deleteOnReset(4), deleteOnReset(4),
skipping to change at page 61, line 33 skipping to change at page 62, line 39
so differ from the following values. so differ from the following values.
invalid(2) - writing this value to the object invalid(2) - writing this value to the object
removes the corresponding entry. removes the corresponding entry.
permanent(3) - this entry is currently in use permanent(3) - this entry is currently in use
and will remain so after the next reset of and will remain so after the next reset of
the bridge. the bridge.
deleteOnReset(4) - this entry is currently in deleteOnReset(4) - this entry is currently in
use and will remain so until the next use and will remain so until the next
reset of the bridge. reset of the bridge.
deleteOnTimeout(5) - this entry is currently in deleteOnTimeout(5) - this entry is currently in
use and will remain so until it is aged out." use and will remain so until it is aged out.
The value of this object MUST be retained across
reinitializations of the management system."
DEFVAL { permanent } DEFVAL { permanent }
::= { dot1qStaticUnicastEntry 4 } ::= { dot1qStaticUnicastEntry 4 }
dot1qStaticMulticastTable OBJECT-TYPE dot1qStaticMulticastTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dot1qStaticMulticastEntry SYNTAX SEQUENCE OF Dot1qStaticMulticastEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A table containing filtering information for Multicast "A table containing filtering information for Multicast
and Broadcast MAC addresses for each VLAN, configured and Broadcast MAC addresses for each VLAN, configured
skipping to change at page 63, line 32 skipping to change at page 64, line 41
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The set of ports to which frames received from a "The set of ports to which frames received from a
specific port and destined for a specific Multicast or specific port and destined for a specific Multicast or
Broadcast MAC address must be forwarded, regardless of Broadcast MAC address must be forwarded, regardless of
any dynamic information e.g. from GMRP. A port may not any dynamic information e.g. from GMRP. A port may not
be added in this set if it is already a member of the be added in this set if it is already a member of the
set of ports in dot1qStaticMulticastForbiddenEgressPorts. set of ports in dot1qStaticMulticastForbiddenEgressPorts.
The default value of this object is a string of ones of The default value of this object is a string of ones of
appropriate length." appropriate length.
The value of this object MUST be retained across
reinitializations of the management system."
::= { dot1qStaticMulticastEntry 3 } ::= { dot1qStaticMulticastEntry 3 }
dot1qStaticMulticastForbiddenEgressPorts OBJECT-TYPE dot1qStaticMulticastForbiddenEgressPorts OBJECT-TYPE
SYNTAX PortList SYNTAX PortList
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The set of ports to which frames received from a "The set of ports to which frames received from a
specific port and destined for a specific Multicast or specific port and destined for a specific Multicast or
Broadcast MAC address must not be forwarded, regardless Broadcast MAC address must not be forwarded, regardless
of any dynamic information e.g. from GMRP. A port may of any dynamic information e.g. from GMRP. A port may
not be added in this set if it is already a member of the not be added in this set if it is already a member of the
set of ports in dot1qStaticMulticastStaticEgressPorts. set of ports in dot1qStaticMulticastStaticEgressPorts.
The default value of this object is a string of zeros of The default value of this object is a string of zeros of
appropriate length." appropriate length.
The value of this object MUST be retained across
reinitializations of the management system."
::= { dot1qStaticMulticastEntry 4 } ::= { dot1qStaticMulticastEntry 4 }
dot1qStaticMulticastStatus OBJECT-TYPE dot1qStaticMulticastStatus OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
other(1), other(1),
invalid(2), invalid(2),
permanent(3), permanent(3),
deleteOnReset(4), deleteOnReset(4),
deleteOnTimeout(5) deleteOnTimeout(5)
} }
skipping to change at page 64, line 29 skipping to change at page 65, line 43
so differ from the following values. so differ from the following values.
invalid(2) - writing this value to the object invalid(2) - writing this value to the object
removes the corresponding entry. removes the corresponding entry.
permanent(3) - this entry is currently in use permanent(3) - this entry is currently in use
and will remain so after the next reset of and will remain so after the next reset of
the bridge. the bridge.
deleteOnReset(4) - this entry is currently in deleteOnReset(4) - this entry is currently in
use and will remain so until the next use and will remain so until the next
reset of the bridge. reset of the bridge.
deleteOnTimeout(5) - this entry is currently in deleteOnTimeout(5) - this entry is currently in
use and will remain so until it is aged out." use and will remain so until it is aged out.
The value of this object MUST be retained across
reinitializations of the management system."
DEFVAL { permanent } DEFVAL { permanent }
::= { dot1qStaticMulticastEntry 5 } ::= { dot1qStaticMulticastEntry 5 }
-- ------------------------------------------------------------- -- -------------------------------------------------------------
-- The Current VLAN Database -- The Current VLAN Database
-- ------------------------------------------------------------- -- -------------------------------------------------------------
dot1qVlanNumDeletes OBJECT-TYPE dot1qVlanNumDeletes OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
skipping to change at page 71, line 34 skipping to change at page 73, line 5
dot1qPortRestrictedVlanRegistration dot1qPortRestrictedVlanRegistration
TruthValue TruthValue
} }
dot1qPvid OBJECT-TYPE dot1qPvid OBJECT-TYPE
SYNTAX VlanIndex SYNTAX VlanIndex
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The PVID, the VLAN ID assigned to untagged frames or "The PVID, the VLAN ID assigned to untagged frames or
Priority-Tagged frames received on this port." Priority-Tagged frames received on this port.
The value of this object MUST be retained across
reinitializations of the management system."
REFERENCE REFERENCE
"IEEE 802.1Q/D11 Section 12.10.1.1" "IEEE 802.1Q/D11 Section 12.10.1.1"
DEFVAL { 1 } DEFVAL { 1 }
::= { dot1qPortVlanEntry 1 } ::= { dot1qPortVlanEntry 1 }
dot1qPortAcceptableFrameTypes OBJECT-TYPE dot1qPortAcceptableFrameTypes OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
admitAll(1), admitAll(1),
admitOnlyVlanTagged(2) admitOnlyVlanTagged(2)
} }
skipping to change at page 72, line 11 skipping to change at page 73, line 31
DESCRIPTION DESCRIPTION
"When this is admitOnlyVlanTagged(2) the device will "When this is admitOnlyVlanTagged(2) the device will
discard untagged frames or Priority-Tagged frames discard untagged frames or Priority-Tagged frames
received on this port. When admitAll(1), untagged received on this port. When admitAll(1), untagged
frames or Priority-Tagged frames received on this port frames or Priority-Tagged frames received on this port
will be accepted and assigned to a VID based on the will be accepted and assigned to a VID based on the
PVID and VID Set for this port. PVID and VID Set for this port.
This control does not affect VLAN independent BPDU This control does not affect VLAN independent BPDU
frames, such as GVRP and STP. It does affect VLAN frames, such as GVRP and STP. It does affect VLAN
dependent BPDU frames, such as GMRP." dependent BPDU frames, such as GMRP.
The value of this object MUST be retained across
reinitializations of the management system."
REFERENCE REFERENCE
"IEEE 802.1Q/D11 Section 12.10.1.3" "IEEE 802.1Q/D11 Section 12.10.1.3"
DEFVAL { admitAll } DEFVAL { admitAll }
::= { dot1qPortVlanEntry 2 } ::= { dot1qPortVlanEntry 2 }
dot1qPortIngressFiltering OBJECT-TYPE dot1qPortIngressFiltering OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"When this is true(1) the device will discard incoming "When this is true(1) the device will discard incoming
frames for VLANs which do not include this Port in its frames for VLANs which do not include this Port in its
Member set. When false(2), the port will accept all Member set. When false(2), the port will accept all
incoming frames. incoming frames.
This control does not affect VLAN independent BPDU This control does not affect VLAN independent BPDU
frames, such as GVRP and STP. It does affect VLAN frames, such as GVRP and STP. It does affect VLAN
dependent BPDU frames, such as GMRP." dependent BPDU frames, such as GMRP.
The value of this object MUST be retained across
reinitializations of the management system."
REFERENCE REFERENCE
"IEEE 802.1Q/D11 Section 12.10.1.4" "IEEE 802.1Q/D11 Section 12.10.1.4"
DEFVAL { false } DEFVAL { false }
::= { dot1qPortVlanEntry 3 } ::= { dot1qPortVlanEntry 3 }
dot1qPortGvrpStatus OBJECT-TYPE dot1qPortGvrpStatus OBJECT-TYPE
SYNTAX EnabledStatus SYNTAX EnabledStatus
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The state of GVRP operation on this port. The value "The state of GVRP operation on this port. The value
enabled(1) indicates that GVRP is enabled on this port, enabled(1) indicates that GVRP is enabled on this port,
as long as dot1qGvrpStatus is also enabled for this as long as dot1qGvrpStatus is also enabled for this
device. When disabled(2) but dot1qGvrpStatus is still device. When disabled(2) but dot1qGvrpStatus is still
enabled for the device, GVRP is disabled on this port: enabled for the device, GVRP is disabled on this port:
any GVRP packets received will be silently discarded and any GVRP packets received will be silently discarded and
no GVRP registrations will be propagated from other no GVRP registrations will be propagated from other
ports. This object affects all GVRP Applicant and ports. This object affects all GVRP Applicant and
Registrar state machines on this port. A transition Registrar state machines on this port. A transition
from disabled(2) to enabled(1) will cause a reset of all from disabled(2) to enabled(1) will cause a reset of all
GVRP state machines on this port." GVRP state machines on this port.
The value of this object MUST be retained across
reinitializations of the management system."
DEFVAL { enabled } DEFVAL { enabled }
::= { dot1qPortVlanEntry 4 } ::= { dot1qPortVlanEntry 4 }
dot1qPortGvrpFailedRegistrations OBJECT-TYPE dot1qPortGvrpFailedRegistrations OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The total number of failed GVRP registrations, for any "The total number of failed GVRP registrations, for any
reason, on this port." reason, on this port."
skipping to change at page 73, line 36 skipping to change at page 75, line 19
dot1qPortRestrictedVlanRegistration OBJECT-TYPE dot1qPortRestrictedVlanRegistration OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The state of Restricted VLAN Registration on this port. "The state of Restricted VLAN Registration on this port.
If the value of this control is true(1), then creation If the value of this control is true(1), then creation
of a new dynamic VLAN entry is permitted only if there of a new dynamic VLAN entry is permitted only if there
is a Static VLAN Registration Entry for the VLAN concerned, is a Static VLAN Registration Entry for the VLAN concerned,
in which the Registrar Administrative Control value for in which the Registrar Administrative Control value for
this port is Normal Registration." this port is Normal Registration.
The value of this object MUST be retained across
reinitializations of the management system."
REFERENCE REFERENCE
"IEEE 802.1u clause 11.2.3.2.3, 12.10.1.7." "IEEE 802.1u clause 11.2.3.2.3, 12.10.1.7."
DEFVAL { false } DEFVAL { false }
::= { dot1qPortVlanEntry 7 } ::= { dot1qPortVlanEntry 7 }
-- ------------------------------------------------------------- -- -------------------------------------------------------------
-- Per port VLAN Statistics Table -- Per port VLAN Statistics Table
-- ------------------------------------------------------------- -- -------------------------------------------------------------
dot1qPortVlanStatisticsTable OBJECT-TYPE dot1qPortVlanStatisticsTable OBJECT-TYPE
skipping to change at page 80, line 10 skipping to change at page 81, line 42
"The status of this entry." "The status of this entry."
::= { dot1qLearningConstraintsEntry 4 } ::= { dot1qLearningConstraintsEntry 4 }
dot1qConstraintSetDefault OBJECT-TYPE dot1qConstraintSetDefault OBJECT-TYPE
SYNTAX Integer32 (0..65535) SYNTAX Integer32 (0..65535)
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The identity of the constraint set to which a VLAN "The identity of the constraint set to which a VLAN
belongs, if there is not an explicit entry for that VLAN belongs, if there is not an explicit entry for that VLAN
in dot1qLearningConstraintsTable." in dot1qLearningConstraintsTable.
The value of this object MUST be retained across
reinitializations of the management system."
::= { dot1qVlan 9 } ::= { dot1qVlan 9 }
dot1qConstraintTypeDefault OBJECT-TYPE dot1qConstraintTypeDefault OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
independent(1), independent(1),
shared(2) shared(2)
} }
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The type of constraint set to which a VLAN belongs, if "The type of constraint set to which a VLAN belongs, if
there is not an explicit entry for that VLAN in there is not an explicit entry for that VLAN in
dot1qLearningConstraintsTable. The types are as defined dot1qLearningConstraintsTable. The types are as defined
for dot1qConstraintType." for dot1qConstraintType.
The value of this object MUST be retained across
reinitializations of the management system."
::= { dot1qVlan 10 } ::= { dot1qVlan 10 }
-- ------------------------------------------------------------- -- -------------------------------------------------------------
-- dot1vProtocol subtree -- dot1vProtocol subtree
-- ------------------------------------------------------------- -- -------------------------------------------------------------
dot1vProtocolGroupTable OBJECT-TYPE dot1vProtocolGroupTable OBJECT-TYPE
SYNTAX SEQUENCE OF Dot1vProtocolGroupEntry SYNTAX SEQUENCE OF Dot1vProtocolGroupEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
skipping to change at page 89, line 9 skipping to change at page 90, line 49
::= { qBridgeGroups 16 } ::= { qBridgeGroups 16 }
-- ------------------------------------------------------------- -- -------------------------------------------------------------
-- compliance statements -- compliance statements
-- ------------------------------------------------------------- -- -------------------------------------------------------------
qBridgeCompliance MODULE-COMPLIANCE qBridgeCompliance MODULE-COMPLIANCE
STATUS deprecated STATUS deprecated
DESCRIPTION DESCRIPTION
"The compliance statement for device support of Virtual "The compliance statement for device support of Virtual
LAN Bridge services." LAN Bridge services.
RFC2674 was silent about the expected persistence of the
read-write objects in this MIB module. Applications MUST
NOT assume that the values of the read-write objects are
persistent across reinitializations of the management
system, and MUST NOT assume that the values are not
persistent across reinitializations of the management
system."
MODULE MODULE
MANDATORY-GROUPS { MANDATORY-GROUPS {
qBridgeBaseGroup, qBridgeBaseGroup,
qBridgeVlanGroup, qBridgeVlanGroup,
qBridgeVlanStaticGroup, qBridgeVlanStaticGroup,
qBridgePortGroup qBridgePortGroup
} }
GROUP qBridgeFdbUnicastGroup GROUP qBridgeFdbUnicastGroup
skipping to change at page 90, line 47 skipping to change at page 93, line 4
MIN-ACCESS read-only MIN-ACCESS read-only
DESCRIPTION DESCRIPTION
"Write access is not required as this is an optional "Write access is not required as this is an optional
capability in IEEE 802.1Q." capability in IEEE 802.1Q."
OBJECT dot1qConstraintTypeDefault OBJECT dot1qConstraintTypeDefault
MIN-ACCESS read-only MIN-ACCESS read-only
DESCRIPTION DESCRIPTION
"Write access is not required as this is an optional "Write access is not required as this is an optional
capability in IEEE 802.1Q." capability in IEEE 802.1Q."
::= { qBridgeCompliances 1 } ::= { qBridgeCompliances 1 }
qBridgeCompliance2 MODULE-COMPLIANCE qBridgeCompliance2 MODULE-COMPLIANCE
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The compliance statement for device support of Virtual "The compliance statement for device support of Virtual
LAN Bridge services." LAN Bridge services.
This document clarifies the persistence requirements for
the read-write objects in this MIB module. All
implementations claiming compliance to qBridgeCompliance2
MUST retain the values of those read-write objects that
specify this requirement."
MODULE MODULE
MANDATORY-GROUPS { MANDATORY-GROUPS {
qBridgeBaseGroup, qBridgeBaseGroup,
qBridgeVlanGroup, qBridgeVlanGroup,
qBridgeVlanStaticGroup, qBridgeVlanStaticGroup,
qBridgePortGroup2 qBridgePortGroup2
} }
GROUP qBridgeFdbUnicastGroup GROUP qBridgeFdbUnicastGroup
 End of changes. 

This html diff was produced by rfcdiff 1.25, available from http://www.levkowetz.com/ietf/tools/rfcdiff/