draft-ietf-ccamp-gmpls-ted-mib-06.txt   draft-ietf-ccamp-gmpls-ted-mib-07.txt 
INTERNET-DRAFT Masanori Miyazawa INTERNET-DRAFT Masanori Miyazawa
Intended status: Standards Truck KDDI R&D Labs Intended status: Standards Truck KDDI R&D Labs
Expires: April 26, 2010 Tomohiro Otani Expires: January 02, 2011 Tomohiro Otani
KDDI Corporation KDDI Corporation
Thomas Nadeau Thomas Nadeau
BT BT
Kenji Kumaki Kenji Kumaki
KDDI Corporation KDDI Corporation
October 26, 2009 August 02, 2010
Traffic Engineering Database Management Information Base in support of Traffic Engineering Database Management Information Base in support of
MPLS-TE/GMPLS MPLS-TE/GMPLS
draft-ietf-ccamp-gmpls-ted-mib-06.txt draft-ietf-ccamp-gmpls-ted-mib-07.txt
Status of this Memo Status of this Memo
This Internet-Draft is submitted to IETF in full conformance with This Internet-Draft is submitted to IETF in full conformance with
the provisions of BCP 78 and BCP 79. the provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF), its areas, and its working groups. Note that other Task Force (IETF), its areas, and its working groups. Note that other
groups may also distribute working documents as Internet-Drafts. groups may also distribute working documents as Internet-Drafts.
Internet-Drafts are draft documents valid for a maximum of six months Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress." material or to cite them other than as "work in progress."
The list of current Internet-Drafts can be accessed at The list of current Internet-Drafts can be accessed at
http://www.ietf.org/ietf/1id-abstracts.txt http://www.ietf.org/ietf/1id-abstracts.txt
The list of Internet-Draft Shadow Directories can be accessed at The list of Internet-Draft Shadow Directories can be accessed at
http://www.ietf.org/shadow.html. http://www.ietf.org/shadow.html.
Copyright and License Notice
Copyright (c) 2010 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License.
Abstract Abstract
This memo defines the Management Information Base (MIB) objects in This memo defines the Management Information Base (MIB) objects in
order to manage traffic engineering database (TED) information with order to manage traffic engineering database (TED) information with
extension in support of Multi-Protocol Label Switching (MPLS) with extension in support of Multi-Protocol Label Switching (MPLS) with
draft-ietf-ccamp-gmpls-ted-mib-07.txt Aug. 2010
traffic engineering (TE) as well as Generalized MPLS (GMPLS) for use traffic engineering (TE) as well as Generalized MPLS (GMPLS) for use
with network management protocols. with network management protocols.
Table of Contents Table of Contents
Status of this Memo................................................... 1 Status of this Memo................................................... 1
Abstract.............................................................. 1 Abstract.............................................................. 1
1. The Internet-Standard Management Framework......................... 3 1. The Internet-Standard Management Framework......................... 2
2. Introduction....................................................... 3 2. Introduction....................................................... 3
3. Overview........................................................... 3 3. Overview........................................................... 3
3.1 Conventions used in this document................................. 3 3.1 Conventions used in this document................................. 3
3.2 Terminology....................................................... 3 3.2 Terminology....................................................... 3
3.3 Acronyms.......................................................... 3 3.3 Acronyms.......................................................... 3
4. Motivations........................................................ 4 4. Motivations........................................................ 4
5. Brief description of MIB Objects................................... 4 5. Brief description of MIB Objects................................... 4
5.1 tedTable.......................................................... 4 5.1 tedTable.......................................................... 4
5.2 teLocalIfIpAddrTable.............................................. 4 5.2 tedLocalIfAddrTable............................................... 4
5.3 teRemoteIfIpAddrTable............................................. 4 5.3 tedRemoteIfAddrTable.............................................. 4
5.4 teSwCapTable...................................................... 4 5.4 tedSwCapTable..................................................... 4
5.5 teSrlgTable....................................................... 5 5.5 tedSrlgTable...................................................... 4
6. Example of the TED MIB module usage................................ 5 6. Example of the TED MIB module usage................................ 4
7. TED MIB Definitions in support of GMPLS............................ 6 7. TED MIB Definitions in support of GMPLS............................ 6
8. Security consideration............................................ 23 8. Security consideration............................................ 29
9. IANA Considerations............................................... 24 9. IANA Considerations............................................... 29
9.1 IANA Considerations for TED-MIB.................................. 24 9.1 IANA Considerations for TED-MIB.................................. 30
10. References....................................................... 24 10. References....................................................... 30
10.1 Normative References............................................ 24 10.1 Normative References............................................ 30
10.2 Informative References.......................................... 24 10.2 Informative References.......................................... 30
11. Acknowledgment................................................... 26 11. Acknowledgment................................................... 31
12. Authors' Addresses............................................... 26 12. Authors' Addresses............................................... 32
13. Intellectual Property Statement.................................. 26
Copyright Statement.................................................. 27
1. The Internet-Standard Management Framework 1. The Internet-Standard Management Framework
For a detailed overview of the documents that describe the current For a detailed overview of the documents that describe the current
Internet-Standard Management Framework, please refer to section 7 of Internet-Standard Management Framework, please refer to section 7 of
RFC 3410 [RFC3410]. RFC 3410 [RFC3410].
Managed objects are accessed via a virtual information store, termed Managed objects are accessed via a virtual information store, termed
the Management Information Base or MIB. MIB objects are generally the Management Information Base or MIB. MIB objects are generally
accessed through the Simple Network Management Protocol (SNMP). accessed through the Simple Network Management Protocol (SNMP).
Objects in the MIB are defined using the mechanisms defined in the Objects in the MIB are defined using the mechanisms defined in the
Structure of Management Information (SMI). This memo specifies a MIB Structure of Management Information (SMI). This memo specifies a MIB
module that is compliant to the SMIv2, which is described in STD 58, module that is compliant to the SMIv2, which is described in STD 58,
RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58, RFC 2580 RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58, RFC 2580
[RFC2580]. [RFC2580].
draft-ietf-ccamp-gmpls-ted-mib-07.txt Aug. 2010
2. Introduction 2. Introduction
The OSPF MIB is defined as [RFC4750] and the ISIS MIB as [RFC4444]. The OSPF MIB is defined as [RFC4750] and the ISIS MIB as [RFC4444].
On the other side, MPLS/GMPLS based traffic engineering has so far On the other side, MPLS/GMPLS based traffic engineering has so far
extended OSPF/ISIS routing protocol with TE functionality [RFC4202], extended OSPF/ISIS routing protocol with TE functionality [RFC4202],
[RFC3630], [RFC4205], [RFC3784]. To manage such MPLS-TE/GMPLS [RFC3630], [RFC4205], [RFC3784]. To manage such MPLS-TE/GMPLS
networks effectively, routing information associated with MPLS/GMPLS networks effectively, routing information associated with MPLS/GMPLS
TE parameters (TED) is preferred for the network management, however, TE parameters (TED) is preferred for the network management, however,
there is no clear definition of MPLS/GMPLS TE information in existing there is no clear definition of MPLS/GMPLS TE information in existing
MIBs related to OSPF/ISIS. MIBs related to OSPF/ISIS.
skipping to change at page 4, line 21 skipping to change at page 4, line 5
ISIS: Intermediate System to Intermediate System ISIS: Intermediate System to Intermediate System
RSVP: Resource reSerVation Protocol RSVP: Resource reSerVation Protocol
TE: Traffic Engineering TE: Traffic Engineering
PSC: Packet switch capable PSC: Packet switch capable
LSC: Lambda switch capable LSC: Lambda switch capable
FSC: Fiber switch capable FSC: Fiber switch capable
TDM: Time Division Multiplexing TDM: Time Division Multiplexing
SRLG: Shared risk link group SRLG: Shared risk link group
LSA: Link state advertisement LSA: Link state advertisement
draft-ietf-ccamp-gmpls-ted-mib-07.txt Aug. 2010
4. Motivations 4. Motivations
The existing OSPF, ISIS, MPLS and GMPLS MIBs do not provide for the The existing OSPF, ISIS, MPLS and GMPLS MIBs do not provide for the
management of all of the extensions to the OSPF and ISIS protocol. management of all of the extensions to the OSPF and ISIS protocol.
5. Brief description of MIB Objects 5. Brief description of MIB Objects
The objects described in this section support the management of TED The objects described in this section support the management of TED
described in [RFC4202], [RFC4203] and [RFC4205] for GMPLS extensions described in [RFC4202], [RFC4203] and [RFC4205] for GMPLS extensions
as well as in [RFC3630] and [RFC3784] for MPLS/GMPLS. as well as in [RFC3630] and [RFC3784] for MPLS/GMPLS.
5.1 tedTable 5.1 tedTable
The tedTable is basically used to indicate TED information of OSPF-TE The tedTable is basically used to indicate TED information of OSPF-TE
or ISIS-TE. However, this table does not contain the information of or ISIS-TE. However, this table does not contain the information of
Local/Remote interface IP address, Interface Switching Capability Local/Remote interface IP address, Interface Switching Capability
Descriptor and Shared Risk Link Group information within the sub-TLVs Descriptor and Shared Risk Link Group information within the sub-TLVs
for the Link-TLV. for the Link-TLV.
5.2 teLocalIfIpAddrTable 5.2 tedLocalIfAddrTable
The teLocalIfIpAddrTable is identical to the Local interface IP The tedLocalIfAddrTable is identical to the Local interface IP
address information in a sub-TLV for the Link-TLV. This is address information in a sub-TLV for the Link-TLV. This is
independently defined, because the Interface IP Address sub-TLV may independently defined, because the Interface IP Address sub-TLV may
appear more than once within the same Link-TLV. appear more than once within the same Link-TLV.
5.3 teRemoteIfIpAddrTable 5.3 tedRemoteIfAddrTable
The teRemoteIfIpAddrTable is identical to the Remote interface IP The tedRemoteIfAddrTable is identical to the Remote interface IP
address information in a sub-TLV of the Link-TLV. This is also address information in a sub-TLV of the Link-TLV. This is also
independently utilized, because one or more local interface IP independently utilized, because one or more local interface IP
address sub TLVs may exist in the same Link-TLV. address sub TLVs may exist in the same Link-TLV.
5.4 teSwCapTable 5.4 tedSwCapTable
The teSwCapTable represents Interface Switching Capability Descriptor
information. This is independently defined due to the possibility of
multiple appearances of the sub TLV within the same Link-TLV.
5.5 teSrlgTable The tedSwCapTable represents Interface Switching Capability
Descriptor information. This is independently defined due to the
possibility of multiple appearances of the sub TLV within the same
Link-TLV.
The teSrlgTable contains the Sub-TLV information of Shared Risk Link 5.5 tedSrlgTable
The tedSrlgTable contains the Sub-TLV information of Shared Risk Link
Group (SRLG) information. This is separately defined, because more Group (SRLG) information. This is separately defined, because more
than one sub TLVs may appear in the same Link-TLV. than one sub TLVs may appear in the same Link-TLV.
6.Example of the TED MIB Module Usage 6.Example of the TED MIB Module Usage
In this section, we provide an example of the TED MIB module usage. In this section, we provide an example of the TED MIB module usage.
The following indicates the information of a numbered TE link The following indicates the information of a numbered TE link
originated in a GMPLS controlled node. When TE link information is originated in a GMPLS controlled node. When TE link information is
draft-ietf-ccamp-gmpls-ted-mib-07.txt Aug. 2010
retrieved in a MPLS network, GMPLS specific objects such as retrieved in a MPLS network, GMPLS specific objects such as
teLocalIfAddrTable, teRemoteIfAddrTable, teSwCapTable and teSrlgTable tedLocalIfAddrTable, tedRemoteIfAddrTable, tedSwCapTable and
are not supported. tedSrlgTable are not supported.
Note that the TED MIB modules are only limited to "read-only" access Note that the TED MIB modules are only limited to "read-only" access
except for tedNotificationEnabled and tedNotificationMaxRate. The TED except for tedCreateDeleteNotificationMaxRate and
MIB is designed to be independent of OSPF or ISIS MIBs, however each tedStatusChangeNotificationMaxRate. The TED MIB is designed to be
TE information belongs to a node or a link, which is managed by the independent of OSPF or ISIS MIBs, however each TE information belongs
routing protocol. to a node or a link, which is managed by the routing protocol.
In tedTable: In tedTable:
{ {
tedTeAreaId.0.3221225985.16777264 0 tedAreaId.0.3221225985.16777264 0
tedTeRouterId.0.3221225985.16777264 1848783410 tedRouterId.0.3221225985.16777264 1848783410
tedTeLinkStateId.0.3221225985.16777264 805306369 tedLinkStateId.0.3221225985.16777264 805306369
tedTeLinkInformationSource.0.3221225985.16777264 ospf(2) tedLinkInformationSource.0.3221225985.16777264 ospf(2)
tedTeLinkInformationData.0.3221225985.16777264 zeroDotZero tedLinkInformationData.0.3221225985.16777264 zeroDotZero
tedTeLinkType.0.3221225985.16777264 pointToPoint(1) tedLinkType.0.3221225985.16777264 pointToPoint(1)
tedTeRouterIdAddrType.0.3221225985.16777264 ipv4(1) tedRouterIdAddrType.0.3221225985.16777264 ipv4(1)
tedTeRouterIdAddr.0.3221225985.16777264 192.0.2.1 tedRouterIdAddr.0.3221225985.16777264192.0.2.1
tedTeLinkIdAddrType.0.3221225985.16777264 ipv4(1) tedLinkIdAddrType.0.3221225985.16777264 ipv4(1)
tedTeLinkIdAddr.0.3221225985.16777264192.0.2.10 tedLinkIdAddr.0.3221225985.16777264 192.0.2.10
tedTeMetric.0.3221225985.16777264 1 tedMetric.0.3221225985.16777264 1
tedTeMaxBandwidth.0.3221225985.16777264 1376193201 tedMaxBandwidth.0.3221225985.167772641376193201
tedTeMaxReservableBandwidth.0.3221225985.16777264 1376193201 tedMaxReservableBandwidth.0.3221225985.16777264 1376193201
tedTeUnreservedBandwidthPri0.0.3221225985.16777264 1375888025 tedUnreservedBandwidthPri0.0.3221225985.16777264 1375888025
tedTeUnreservedBandwidthPri1.0.3221225985.16777264 1375888025 tedUnreservedBandwidthPri1.0.3221225985.16777264 1375888025
tedTeUnreservedBandwidthPri2.0.3221225985.16777264 1375888025 tedUnreservedBandwidthPri2.0.3221225985.16777264 1375888025
tedTeUnreservedBandwidthPri3.0.3221225985.16777264 1375888025 tedUnreservedBandwidthPri3.0.3221225985.16777264 1375888025
tedTeUnreservedBandwidthPri4.0.3221225985.16777264 1375888025 tedUnreservedBandwidthPri4.0.3221225985.16777264 1375888025
tedTeUnreservedBandwidthPri5.0.3221225985.16777264 1375888025 tedUnreservedBandwidthPri5.0.3221225985.16777264 1375888025
tedTeUnreservedBandwidthPri6.0.3221225985.16777264 1375888025 tedUnreservedBandwidthPri6.0.3221225985.16777264 1375888025
tedTeUnreservedBandwidthPri7.0.3221225985.16777264 1375888025 tedUnreservedBandwidthPri7.0.3221225985.16777264 1375888025
tedTeAdministrativeGroup.0.3221225985.16777264 0 tedAdministrativeGroup.0.3221225985.16777264 0
tedTeLocalId.0.3221225985.16777264 0 tedLocalId.0.3221225985.16777264 0
tedTeRemoteId.0.3221225985.16777264 0 tedRemoteId.0.3221225985.16777264 0
tedTeLinkProtectionType.0.3221225985.1677726401 00 00 00 7 tedLinkProtectionType.0.3221225985.16777264 01 00 00 00 7
In teLocalIfAddrTable:
In tedLocalIfAddrTable:
{ {
teLocalIfAddrType.0.3221225985.16777264.0 ipv4(1) tedLocalIfAddrType.0.3221225985.16777264.0 ipv4(1)
teLocalIfAddr.0.3221225985.16777264.0192.0.2.21 tedLocalIfAddr.0.3221225985.16777264.0 192.0.2.21
} }
In teRemoteIfAddrTable: In tedRemoteIfAddrTable:
{ {
teRemoteIfAddrType.0.3221225985.16777264.0 ipv4(1) tedRemoteIfAddrType.0.3221225985.16777264.0 ipv4(1)
teRemoteIfAddr.0.3221225985.16777264.0 192.0.2.22 tedRemoteIfAddr.0.3221225985.16777264.0 192.0.2.22
} }
In teSwCapTable: In tedSwCapTable:
{ {
teSwitchingType.0.3221225985.16777264.1 lsc(150) tedSwCapSwitchingType.0.3221225985.16777264.1lsc(150)
teEncoding.0.3221225985.16777264.1 ethernet(2) tedSwCapEncoding.0.3221225985.16777264.1 ethernet(2)
teMaxLspBandwidthPri0.0.3221225985.16777264.11375888025
teMaxLspBandwidthPri1.0.3221225985.16777264.11375888025 draft-ietf-ccamp-gmpls-ted-mib-07.txt Aug. 2010
teMaxLspBandwidthPri2.0.3221225985.16777264.11375888025
teMaxLspBandwidthPri3.0.3221225985.16777264.11375888025 tedSwCapMaxLspBandwidthPri0.0.3221225985.16777264.1 1375888025
teMaxLspBandwidthPri4.0.3221225985.16777264.11375888025 tedSwCapMaxLspBandwidthPri1.0.3221225985.16777264.1 1375888025
teMaxLspBandwidthPri5.0.3221225985.16777264.11375888025 tedSwCapMaxLspBandwidthPri2.0.3221225985.16777264.1 1375888025
teMaxLspBandwidthPri6.0.3221225985.16777264.11375888025 tedSwCapMaxLspBandwidthPri3.0.3221225985.16777264.1 1375888025
teMaxLspBandwidthPri7.0.3221225985.16777264.11375888025s tedSwCapMaxLspBandwidthPri4.0.3221225985.16777264.1 1375888025
teMinLspBandwidth.0.3221225985.16777264.1 0 tedSwCapMaxLspBandwidthPri5.0.3221225985.16777264.1 1375888025
teIfMtu.0.3221225985.16777264.1 0 tedSwCapMaxLspBandwidthPri6.0.3221225985.16777264.1 1375888025
teIndication.0.3221225985.16777264.1 standard(0) tedSwCapMaxLspBandwidthPri7.0.3221225985.16777264.1 1375888025
tedSwCapMinLspBandwidth.0.3221225985.16777264.1 0
tedSwCapIfMtu.0.3221225985.16777264.10
tedSwCapIndication.0.3221225985.16777264.1 standard(0)
} }
In teSrlgTable: In tedSrlgTable:
{ {
teSrlg.0.3221225985.16777264.0 0 tedSrlg.0.3221225985.16777264.0 0
} }
7. TED MIB Definitions in support of GMPLS 7. TED MIB Definitions in support of GMPLS
TED-MIB DEFINITIONS ::= BEGIN TED-MIB DEFINITIONS ::= BEGIN
IMPORTS IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32, transmission, MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32, transmission,
NOTIFICATION-TYPE NOTIFICATION-TYPE
FROM SNMPv2-SMI -- RFC2578 FROM SNMPv2-SMI -- RFC2578
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF -- RFC2580 FROM SNMPv2-CONF -- RFC2580
RowPointer, TruthValue TEXTUAL-CONVENTION, RowPointer
FROM SNMPv2-TC -- RFC2579 FROM SNMPv2-TC -- RFC2579
IANAGmplsLSPEncodingTypeTC, IANAGmplsSwitchingTypeTC IANAGmplsLSPEncodingTypeTC, IANAGmplsSwitchingTypeTC
FROM IANA-GMPLS-TC-MIB -- RFC4801 FROM IANA-GMPLS-TC-MIB -- RFC4801
InetAddress, InetAddressType InetAddress, InetAddressType
FROM INET-ADDRESS-MIB -- RFC3291 FROM INET-ADDRESS-MIB -- RFC3291
; ;
tedMIB MODULE-IDENTITY tedMIB MODULE-IDENTITY
LAST-UPDATED "200807030000Z" -- 03 July 2008 00:00:00 GMT LAST-UPDATED "201008020000Z" -- 02 August 2010 00:00:00 GMT
ORGANIZATION "IETF CCAMP Working Group." ORGANIZATION "IETF CCAMP Working Group."
CONTACT-INFO CONTACT-INFO
" Tomohiro Otani " Tomohiro Otani
otani@kddilabs.jp otani@kddilabs.jp
Masanori Miyazawa Masanori Miyazawa
ma-miyazawa@kddilabs.jp ma-miyazawa@kddilabs.jp
Thomas D. Nadeau Thomas D. Nadeau
tnadeau@bt.com tnadeau@bt.com
Kenji Kumaki Kenji Kumaki
ke-kumaki@kddilabs.jp ke-kumaki@kddilabs.jp
Comments and discussion to ccamp@ietf.org" Comments and discussion to ccamp@ietf.org"
draft-ietf-ccamp-gmpls-ted-mib-07.txt Aug. 2010
DESCRIPTION DESCRIPTION
"This MIB contains managed object definitions for TED in "This MIB contains managed object definitions for TED in
support of MPLS/GMPLS TE Database. support of MPLS/GMPLS TE Database.
Copyright (C) 2009 The IETF Trust. This version of this MIB Copyright (C) 2009 The IETF Trust. This version of this MIB
module is part of RFC xxx; see the RFC itself for full legal module is part of RFC xxx; see the RFC itself for full legal
notices." notices."
-- Revision history. -- Revision history.
REVISION REVISION
"200807030000Z" -- 04 July 2008 00:00:00 GMT "201008020000Z" -- 02 August 2010 00:00:00 GMT
DESCRIPTION DESCRIPTION
"Initial version. Published as RFC xxx." "Initial version. Published as RFC xxx."
-- RFC-editor pls fill in yyy -- RFC-editor pls fill in yyy
::= { transmission yyy } ::= { transmission yyy }
-- assigned by IANA, see section 8.1 for details -- assigned by IANA, see section 9.1 for details
-- Textual Conventions. -- Textual Conventions.
AreaID ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
"The area identifier of the IGP. If OSPF is used to
advertise LSA, this represents an ospfArea. If ISIS is used, this
represents an area address."
SYNTAX Unsigned32 (1..4294967295)
RouterID ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
" The router identifier. If OSPF is used to advertise LSA,
this represents a Router ID. If ISIS is used, this represents a
System ID."
SYNTAX Unsigned32 (1..4294967295)
LinkStateID ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d"
STATUS current
DESCRIPTION
" The link state identifier. If OSPF is used, this
represents an ospfLsdbID. If ISIS is used, this represents an
isisLSPID."
SYNTAX Unsigned32 (1..4294967295)
-- Top level components of this MIB. -- Top level components of this MIB.
tedNotifications OBJECT IDENTIFIER ::= { tedMIB 0 } tedNotifications OBJECT IDENTIFIER ::= { tedMIB 0 }
tedObjects OBJECT IDENTIFIER ::= { tedMIB 1 } tedObjects OBJECT IDENTIFIER ::= { tedMIB 1 }
tedConformance OBJECT IDENTIFIER ::= { tedMIB 2 } tedConformance OBJECT IDENTIFIER ::= { tedMIB 2 }
-- MIB Definitions
-- --
-- Ted Objects -- Ted Objects
-- --
tedNotificationEnabled OBJECT-TYPE
SYNTAX TruthValue draft-ietf-ccamp-gmpls-ted-mib-07.txt Aug. 2010
MAX-ACCESS read-write
STATUS current tedCreateDeleteNotificationMaxRate OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION DESCRIPTION
"If this object is set to true, it enables the generation of "A lot of notifications relating to new registration in ted
tedTeInfoStatusChange, tedTeCreation and tedTeDeletion table by receiving new TE link information or deletion of existing
notifications." entries in ted table are expected to generate in a node. This object
DEFVAL {false} provides the maximum number of notifications generated per minute. "
::={ tedObjects 1 } DEFVAL {0}
tedNotificationMaxRate OBJECT-TYPE ::= { tedObjects 1 }
tedStatusChangeNotificationMaxRate OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A lot of notifications are expected to generate in a node, "A lot of notifications relating to the status change are
especially when a network failure occurs and might cause a expected to generate in a node, especially when a network failure
performance degradation of the node itself. To avoid such a defect, occurs and might cause a performance degradation of the node itself.
this object provides the maximum number of notifications generated To avoid such a defect, this object provides the maximum number of
per minute. If events occur more rapidly, the implementation may notifications generated per minute. If events occur more rapidly,
simply fail to emit these notifications during that period, or may the implementation may simply fail to emit these notifications during
queue them until an appropriate time. A value of 0 means no that period, or may queue them until an appropriate time. A value of
throttling is applied and events may be notified at the rate at which 0 means no throttling is applied and events may be notified at the
they occur." rate at which they occur."
DEFVAL {0} DEFVAL {0}
::= { tedObjects 2 } ::= { tedObjects 2 }
tedInfoStatus OBJECT-TYPE
SYNTAX INTEGER {
inUse(1),
notInUse(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the value of states to check if the
objects in this MIB is currently in use or not. When there are any
configurations for the TED in a router, this object represents
inUse(1). Otherwise, when there is no configuration, this object
represent notInUse(2). "
::={ tedObjects 3 }
-- --
-- TED Table -- TED Table
-- --
tedTable OBJECT-TYPE tedTable OBJECT-TYPE
SYNTAX SEQUENCE OF TedEntry SYNTAX SEQUENCE OF TedEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
draft-ietf-ccamp-gmpls-ted-mib-07.txt Aug. 2010
"This table indicates multiple TED information which has been "This table indicates multiple TED information which has been
supported by [RFC3630]." supported by [RFC3630]."
::= { tedObjects 3 } ::= { tedObjects 4 }
tedEntry OBJECT-TYPE tedEntry OBJECT-TYPE
SYNTAX TedEntry SYNTAX TedEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This entry contains TED information commonly utilized in both "This entry contains TED information commonly utilized in both
MPLS and GMPLS." MPLS and GMPLS."
INDEX { tedAreaId, tedRouterId, tedLinkStateId } INDEX { tedAreaId, tedRouterId, tedLinkStateId }
::= { tedTable 1 } ::= { tedTable 1 }
TedEntry ::= SEQUENCE { TedEntry ::= SEQUENCE {
tedAreaId Unsigned32, tedAreaId AreaID,
tedRouterId Unsigned32, tedRouterId RouterID,
tedLinkStateId Unsigned32, tedLinkStateId LinkStateID,
tedLinkInformationSource INTEGER, tedLinkInformationSource INTEGER,
tedLinkInformationData RowPointer, tedLinkInformationData RowPointer,
tedLinkType INTEGER, tedLinkType INTEGER,
tedRouterIdAddrType InetAddressType, tedRouterIdAddrType InetAddressType,
tedRouterIdAddr InetAddress, tedRouterIdAddr InetAddress,
tedLinkIdAddrType InetAddressType, tedLinkIdAddrType InetAddressType,
tedLinkIdAddr InetAddress, tedLinkIdAddr InetAddress,
tedMetric Integer32, tedMetric Integer32,
tedMaxBandwidth Unsigned32, tedMaxBandwidth Unsigned32,
tedMaxReservableBandwidth Unsigned32, tedMaxReservableBandwidth Unsigned32,
skipping to change at page 9, line 20 skipping to change at page 9, line 50
tedUnreservedBandwidthPri5 Unsigned32, tedUnreservedBandwidthPri5 Unsigned32,
tedUnreservedBandwidthPri6 Unsigned32, tedUnreservedBandwidthPri6 Unsigned32,
tedUnreservedBandwidthPri7 Unsigned32, tedUnreservedBandwidthPri7 Unsigned32,
tedAdministrativeGroup Integer32, tedAdministrativeGroup Integer32,
tedLocalId Integer32, tedLocalId Integer32,
tedRemoteId Integer32, tedRemoteId Integer32,
tedLinkProtectionType BITS tedLinkProtectionType BITS
} }
tedAreaId OBJECT-TYPE tedAreaId OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295) SYNTAX AreaID
MAX-ACCESS read-only MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the area identifier of the IGP. If OSPF "This object indicates the area identifier of the IGP. If OSPF
is used to advertise LSA, this represents an ospfArea. If ISIS is is used to advertise LSA, this represents an ospfArea. If ISIS is
used, this represents an area address. Otherwise, this represents used, this represents an area address. Otherwise, this represents
zero." zero."
REFERENCE
" OSPF Version 2, RFC2328, C.2
OSPF for IPv6, RFC5340, C.2 "
draft-ietf-ccamp-gmpls-ted-mib-07.txt Aug. 2010
::= { tedEntry 1 } ::= { tedEntry 1 }
tedRouterId OBJECT-TYPE tedRouterId OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295) SYNTAX RouterID
MAX-ACCESS read-only MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the router identifier. If OSPF is used "This object indicates the router identifier. If OSPF is used
to advertise LSA, this represents a Router ID. If ISIS is used, this to advertise LSA, this represents a Router ID. If ISIS is used, this
represents a System ID. Otherwise, this represents zero." represents a System ID. Otherwise, this represents zero."
REFERENCE
" OSPF Version 2, RFC2328, C.1
OSPF for IPv6, RFC5340, C.1 "
::= { tedEntry 2 } ::= { tedEntry 2 }
tedLinkStateId OBJECT-TYPE tedLinkStateId OBJECT-TYPE
SYNTAX Unsigned32 (1..4294967295) SYNTAX LinkStateID
MAX-ACCESS read-only MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the link state identifier. If OSPF is "This object indicates the link state identifier. If OSPF is
used, this represents an ospfLsdbID. If ISIS is used, this represents used, this represents an ospfLsdbID. If ISIS is used, this represents
an isisLSPID. Otherwise, this represents a unique identifier within a an isisLSPID. Otherwise, this represents a unique identifier within a
node." node."
REFERENCE
"OSPF Version 2, RFC2328, A.4.1,
OSPF for IPv6, RFC5340, A.4.2"
::= { tedEntry 3 } ::= { tedEntry 3 }
tedLinkInformationSource OBJECT-TYPE tedLinkInformationSource OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
unknown(0), unknown(0),
locallyConfigured(1), locallyConfigured(1),
ospf(2), ospfv2(2),
isis(3), ospfv3(3),
other(4) isis(4),
other(5)
} }
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the source of the information about the "This object indicates the source of the information about the
TE link." TE link."
::= { tedEntry 4 } ::= { tedEntry 4 }
tedLinkInformationData OBJECT-TYPE tedLinkInformationData OBJECT-TYPE
SYNTAX RowPointer SYNTAX RowPointer
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object cross-references the source of the information "This object cross-references the source of the information
about this TE link and should be interpretted in the context of about this TE link and should be interpretted in the context of
tedLinkInformationSource. tedLinkInformationSource.
draft-ietf-ccamp-gmpls-ted-mib-07.txt Aug. 2010
If tedLinkInformationSource has the value unknown(0), this If tedLinkInformationSource has the value unknown(0), this
object SHOULD contain a value of zeroDotZero. object SHOULD contain a value of zeroDotZero.
If tedLinkInformationSource has the value If tedLinkInformationSource has the value
locallyConfigured(1), this object MAY contain the identifier of locallyConfigured(1), this object MAY contain the identifier of
the corresponding row entry in the teLinkTable of TE-LINK-STD- the corresponding row entry in the teLinkTable of TE-LINK-STD-
MIB[RFC4220], the identifier of the corresponding row in a local MIB[RFC4220], the identifier of the corresponding row in a local
proprietary TE link MIB module, or the value of zeroDotZero proprietary TE link MIB module, or the value of zeroDotZero
otherwise. otherwise.
If tedLinkInformationSource has the value ospf(2), this If tedLinkInformationSource has the value ospfv2(2)and
object MAY contain the identifier of the corresponding row entry ospfv3(3), this object MAY contain the identifier of the
in the ospfLocalLsdbTable of OSPF-MIB [RFC4750], or the value of corresponding row entry in the ospfLocalLsdbTable of OSPFv2-
zeroDotZero otherwise. MIB[RFC4750] and the ospfv3AreaLsdbTable of OSPFv3-MIB[RFC5634],
If tedLinkInformationSource has the value isis(3) this object or the value of zeroDotZero otherwise.
If tedLinkInformationSource has the value isis(4) this object
MAY contain the identifier of the corresponding row entry in the MAY contain the identifier of the corresponding row entry in the
isisAreaAddr of ISIS-MIB [RFC4444], or the value of zeroDotZero isisAreaAddr of ISIS-MIB [RFC4444], or the value of zeroDotZero
otherwise. otherwise.
If tedLinkInformationSource has the value other(4) this If tedLinkInformationSource has the value other(5) this
object MAY contain the identifier of the corresponding row entry object MAY contain the identifier of the corresponding row entry
a local proprietary MIB module, or the value of zeroDotZero a local proprietary MIB module, or the value of zeroDotZero
otherwise." otherwise."
::= { tedEntry 5 } ::= { tedEntry 5 }
tedLinkType OBJECT-TYPE tedLinkType OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
pointToPoint (1), pointToPoint (1),
multiAccess (2) multiAccess (2)
} }
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the type of the link such as point-to-point or "This indicates the type of the link such as point-to-point or
multi-access." multi-access."
REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
3630, 2.5.1"
::= { tedEntry 6 } ::= { tedEntry 6 }
tedRouterIdAddrType OBJECT-TYPE tedRouterIdAddrType OBJECT-TYPE
SYNTAX InetAddressType SYNTAX InetAddressType
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object indicates the TE-Router ID address type. Only " This object indicates the TE-Router ID address type. Only
values unknown(0), ipv4(1) or ipv6(2) must be supported. " values unknown(0), ipv4(1) or ipv6(2) must be supported. "
::= { tedEntry 7 } ::= { tedEntry 7 }
tedRouterIdAddr OBJECT-TYPE tedRouterIdAddr OBJECT-TYPE
SYNTAX InetAddress SYNTAX InetAddress
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the TE-Router ID." "This object indicates the TE-Router ID."
draft-ietf-ccamp-gmpls-ted-mib-07.txt Aug. 2010
REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
3630, 2.4.1"
::= { tedEntry 8 } ::= { tedEntry 8 }
tedLinkIdAddrType OBJECT-TYPE tedLinkIdAddrType OBJECT-TYPE
SYNTAX InetAddressType SYNTAX InetAddressType
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object indicates the address type of the TE Link ID. " This object indicates the address type of the TE Link ID.
Only values unknown(0), ipv4(1) or ipv6(2) must be supported." Only values unknown(0), ipv4(1) or ipv6(2) must be supported."
::= { tedEntry 9 } ::= { tedEntry 9 }
tedLinkIdAddr OBJECT-TYPE tedLinkIdAddr OBJECT-TYPE
SYNTAX InetAddress SYNTAX InetAddress
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the Router ID of the neighbor in the case of "This indicates the Router ID of the neighbor in the case of
point-to-point links. This also indicates the interface address of point-to-point links. This also indicates the interface address of
the designated router in the case of multi-access links." the designated router in the case of multi-access links."
REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
3630, 2.5.2"
::= { tedEntry 10 } ::= { tedEntry 10 }
tedMetric OBJECT-TYPE tedMetric OBJECT-TYPE
SYNTAX Integer32 SYNTAX Integer32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the traffic engineering metric value of the TE "This indicates the traffic engineering metric value of the TE
link." link."
REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
3630, 2.5.5"
::= { tedEntry 11 } ::= { tedEntry 11 }
tedMaxBandwidth OBJECT-TYPE tedMaxBandwidth OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295) SYNTAX Unsigned32 (0..4294967295)
UNITS "Byte per seconds" UNITS "Byte per seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the maximum bandwidth that can be used on this "This indicates the maximum bandwidth that can be used on this
link in this direction." link in this direction."
REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
3630, 2.5.6"
::= { tedEntry 12 } ::= { tedEntry 12 }
tedMaxReservableBandwidth OBJECT-TYPE tedMaxReservableBandwidth OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295) SYNTAX Unsigned32 (0..4294967295)
draft-ietf-ccamp-gmpls-ted-mib-07.txt Aug. 2010
UNITS "Byte per seconds" UNITS "Byte per seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the maximum bandwidth that may be reserved on "This indicates the maximum bandwidth that may be reserved on
this link in this direction." this link in this direction."
REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
3630, 2.5.7"
::= { tedEntry 13 } ::= { tedEntry 13 }
tedUnreservedBandwidthPri0 OBJECT-TYPE tedUnreservedBandwidthPri0 OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295) SYNTAX Unsigned32 (0..4294967295)
UNITS "Byte per seconds" UNITS "Byte per seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the amount of bandwidth not yet reserved at the "This indicates the amount of bandwidth not yet reserved at the
priority 0." priority 0."
REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
3630, 2.5.8"
::= { tedEntry 14 } ::= { tedEntry 14 }
tedUnreservedBandwidthPri1 OBJECT-TYPE tedUnreservedBandwidthPri1 OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295) SYNTAX Unsigned32 (0..4294967295)
UNITS "Byte per seconds" UNITS "Byte per seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the amount of bandwidth not yet reserved at the "This indicates the amount of bandwidth not yet reserved at the
priority 1." priority 1."
REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
3630, 2.5.8"
::= { tedEntry 15 } ::= { tedEntry 15 }
tedUnreservedBandwidthPri2 OBJECT-TYPE tedUnreservedBandwidthPri2 OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295) SYNTAX Unsigned32 (0..4294967295)
UNITS "Byte per seconds" UNITS "Byte per seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the amount of bandwidth not yet reserved at the "This indicates the amount of bandwidth not yet reserved at the
priority 2." priority 2."
REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
3630, 2.5.8"
::= { tedEntry 16 } ::= { tedEntry 16 }
tedUnreservedBandwidthPri3 OBJECT-TYPE tedUnreservedBandwidthPri3 OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295) SYNTAX Unsigned32 (0..4294967295)
UNITS "Byte per seconds" UNITS "Byte per seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
draft-ietf-ccamp-gmpls-ted-mib-07.txt Aug. 2010
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the amount of bandwidth not yet reserved at the "This indicates the amount of bandwidth not yet reserved at the
priority 3." priority 3."
REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
3630, 2.5.8"
::= { tedEntry 17 } ::= { tedEntry 17 }
tedUnreservedBandwidthPri4 OBJECT-TYPE tedUnreservedBandwidthPri4 OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295) SYNTAX Unsigned32 (0..4294967295)
UNITS "Byte per seconds" UNITS "Byte per seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the amount of bandwidth not yet reserved at the "This indicates the amount of bandwidth not yet reserved at the
priority 4." priority 4."
REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
3630, 2.5.8"
::= { tedEntry 18 } ::= { tedEntry 18 }
tedUnreservedBandwidthPri5 OBJECT-TYPE tedUnreservedBandwidthPri5 OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295) SYNTAX Unsigned32 (0..4294967295)
UNITS "Byte per seconds" UNITS "Byte per seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the amount of bandwidth not yet reserved at the "This indicates the amount of bandwidth not yet reserved at the
priority 5." priority 5."
REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
3630, 2.5.8"
::= { tedEntry 19 } ::= { tedEntry 19 }
tedUnreservedBandwidthPri6 OBJECT-TYPE tedUnreservedBandwidthPri6 OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295) SYNTAX Unsigned32 (0..4294967295)
UNITS "Byte per seconds" UNITS "Byte per seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the amount of bandwidth not yet reserved at the "This indicates the amount of bandwidth not yet reserved at the
priority 6." priority 6."
REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
3630, 2.5.8"
::= { tedEntry 20 } ::= { tedEntry 20 }
tedUnreservedBandwidthPri7 OBJECT-TYPE tedUnreservedBandwidthPri7 OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295) SYNTAX Unsigned32 (0..4294967295)
UNITS "Byte per seconds" UNITS "Byte per seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
draft-ietf-ccamp-gmpls-ted-mib-07.txt Aug. 2010
"This indicates the amount of bandwidth not yet reserved at the "This indicates the amount of bandwidth not yet reserved at the
priority 7." priority 7."
REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
3630, 2.5.8"
::= { tedEntry 21 } ::= { tedEntry 21 }
tedAdministrativeGroup OBJECT-TYPE tedAdministrativeGroup OBJECT-TYPE
SYNTAX Integer32 SYNTAX Integer32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the Administrative Group which the link belong "This indicates the Administrative Group which the link belong
to. Since the value is a bit mask, the link can belong to multiple to. Since the value is a bit mask, the link can belong to multiple
groups. This is also called Resource Class/Color." groups. This is also called Resource Class/Color."
REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
3630, 2.5.9"
::= { tedEntry 22 } ::= { tedEntry 22 }
tedLocalId OBJECT-TYPE tedLocalId OBJECT-TYPE
SYNTAX Integer32 SYNTAX Integer32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the Link local identifier of an unnumbered "This indicates the Link local identifier of an unnumbered
link." link."
REFERENCE
" OSPF Extensions in Support of GMPLS, RFC 4203, 1.1"
::= { tedEntry 23 } ::= { tedEntry 23 }
tedRemoteId OBJECT-TYPE tedRemoteId OBJECT-TYPE
SYNTAX Integer32 SYNTAX Integer32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the Link remote identifier of an unnumbered "This indicates the Link remote identifier of an unnumbered
link." link."
REFERENCE
" OSPF Extensions in Support of GMPLS, RFC 4203, 1.1"
::= { tedEntry 24 } ::= { tedEntry 24 }
tedLinkProtectionType OBJECT-TYPE tedLinkProtectionType OBJECT-TYPE
SYNTAX BITS { SYNTAX BITS {
extraTraffic(0), extraTraffic(0),
unprotected(1), unprotected(1),
shared (2), shared (2),
dedicatedOneToOne (3), dedicatedOneToOne (3),
dedicatedOnePlusOne(4), dedicatedOnePlusOne(4),
enhanced(5) enhanced(5)
} }
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
draft-ietf-ccamp-gmpls-ted-mib-07.txt Aug. 2010
"This object indicates the protection type of the TE link." "This object indicates the protection type of the TE link."
REFERENCE
" OSPF Extensions in Support of GMPLS, RFC 4203, 1.2"
::= { tedEntry 25 } ::= { tedEntry 25 }
-- --
-- TED Local Interface IP Address Table -- TED Local Interface IP Address Table
-- --
tedLocalIfAddrTable OBJECT-TYPE tedLocalIfAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF TedLocalIfAddrEntry SYNTAX SEQUENCE OF TedLocalIfAddrEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table contains the IP address information of a local TE "This table contains the IP address information of a local TE
link." link."
::= { tedObjects 4 } ::= { tedObjects 5 }
tedLocalIfAddrEntry OBJECT-TYPE tedLocalIfAddrEntry OBJECT-TYPE
SYNTAX TedLocalIfAddrEntry SYNTAX TedLocalIfAddrEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This entry contains the IP address information of the local TE "This entry contains the IP address information of the local TE
link." link."
INDEX { tedAreaId, tedRouterId, tedLinkStateId, INDEX { tedAreaId, tedRouterId, tedLinkStateId,
tedLocalIfAddrIndex } tedLocalIfAddrIndex }
::= { tedLocalIfAddrTable 1 } ::= { tedLocalIfAddrTable 1 }
TedLocalIfAddrEntry ::= SEQUENCE { TedLocalIfAddrEntry ::= SEQUENCE {
tedLocalIfAddrIndex Unsigned32, tedLocalIfAddrIndex Unsigned32,
tedLocalIfAddrType InetAddressType, tedLocalIfAddrType InetAddressType,
tedLocalIfAddr InetAddress tedLocalIfAddr InetAddress
} }
tedLocalIfAddrIndex OBJECT-TYPE tedLocalIfAddrIndex OBJECT-TYPE
SYNTAX Unsigned32(0..4294967295) SYNTAX Unsigned32 (1..255)
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the index to identify multiple local TE links." "This indicates the index to identify multiple local TE links."
::= { tedLocalIfAddrEntry 1 } ::= { tedLocalIfAddrEntry 1 }
tedLocalIfAddrType OBJECT-TYPE tedLocalIfAddrType OBJECT-TYPE
SYNTAX InetAddressType SYNTAX InetAddressType
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the address type of the local TE link. "This object indicates the address type of the local TE link.
Only values unknown(0), ipv4(1) or ipv6(2) have to be supported." Only values unknown(0), ipv4(1) or ipv6(2) have to be supported."
::= { tedLocalIfAddrEntry 2 } ::= { tedLocalIfAddrEntry 2 }
tedLocalIfAddr OBJECT-TYPE tedLocalIfAddr OBJECT-TYPE
SYNTAX InetAddress SYNTAX InetAddress
draft-ietf-ccamp-gmpls-ted-mib-07.txt Aug. 2010
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the address of the local TE link." "This object indicates the address of the local TE link."
REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
3630, 2.5.3,
Traffic Engineering Extensions to OSPF Version3, RFC5329,
4.3"
::= { tedLocalIfAddrEntry 3 } ::= { tedLocalIfAddrEntry 3 }
-- --
-- TED Remote Interface IP Address Table -- TED Remote Interface IP Address Table
-- --
tedRemoteIfAddrTable OBJECT-TYPE tedRemoteIfAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF TedRemoteIfAddrEntry SYNTAX SEQUENCE OF TedRemoteIfAddrEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table contains the IP address information of a remote TE "This table contains the IP address information of a remote TE
link." link."
::= { tedObjects 5 } ::= { tedObjects 6 }
tedRemoteIfAddrEntry OBJECT-TYPE tedRemoteIfAddrEntry OBJECT-TYPE
SYNTAX TedRemoteIfAddrEntry SYNTAX TedRemoteIfAddrEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This entry contains the IP address information of the remote "This entry contains the IP address information of the remote
TE link." TE link."
INDEX { tedAreaId, tedRouterId, tedLinkStateId, INDEX { tedAreaId, tedRouterId, tedLinkStateId,
tedRemoteIfAddrIndex } tedRemoteIfAddrIndex }
::= { tedRemoteIfAddrTable 1 } ::= { tedRemoteIfAddrTable 1 }
TedRemoteIfAddrEntry ::= SEQUENCE { TedRemoteIfAddrEntry ::= SEQUENCE {
tedRemoteIfAddrIndex Unsigned32, tedRemoteIfAddrIndex Unsigned32,
tedRemoteIfAddrType InetAddressType, tedRemoteIfAddrType InetAddressType,
tedRemoteIfAddr InetAddress tedRemoteIfAddr InetAddress
} }
tedRemoteIfAddrIndex OBJECT-TYPE tedRemoteIfAddrIndex OBJECT-TYPE
SYNTAX Unsigned32(0..4294967295) SYNTAX Unsigned32 (1..255)
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the index to identify multiple remote TE "This indicates the index to identify multiple remote TE
links." links."
::= { tedRemoteIfAddrEntry 1 } ::= { tedRemoteIfAddrEntry 1 }
tedRemoteIfAddrType OBJECT-TYPE tedRemoteIfAddrType OBJECT-TYPE
SYNTAX InetAddressType SYNTAX InetAddressType
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
draft-ietf-ccamp-gmpls-ted-mib-07.txt Aug. 2010
DESCRIPTION DESCRIPTION
"This object indicates the address type of the remote TE link." "This object indicates the address type of the remote TE link."
::= { tedRemoteIfAddrEntry 2 } ::= { tedRemoteIfAddrEntry 2 }
tedRemoteIfAddr OBJECT-TYPE tedRemoteIfAddr OBJECT-TYPE
SYNTAX InetAddress SYNTAX InetAddress
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the address of the remote TE link." "This object indicates the address of the remote TE link."
REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
3630, 2.5.4,
Traffic Engineering Extensions to OSPF Version3, RFC5329,
4.4"
::= { tedRemoteIfAddrEntry 3 } ::= { tedRemoteIfAddrEntry 3 }
-- --
-- TED Switch Capable Table -- TED Switch Capable Table
-- --
tedSwCapTable OBJECT-TYPE tedSwCapTable OBJECT-TYPE
SYNTAX SEQUENCE OF TedSwCapEntry SYNTAX SEQUENCE OF TedSwCapEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table contains the GMPLS TED switching capability "This table contains the GMPLS TED switching capability
information." information."
::= { tedObjects 6 } ::= { tedObjects 7 }
tedSwCapEntry OBJECT-TYPE tedSwCapEntry OBJECT-TYPE
SYNTAX TedSwCapEntry SYNTAX TedSwCapEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This entry relates each TE link with its GMPLS TE switching "This entry relates each TE link with its GMPLS TE switching
capability information. IF the MIB deals with only OSPF-TE capability information. IF the MIB deals with only OSPF-TE
information, the value of each object related with GMPLS TE information, the value of each object related with GMPLS TE
extensions should be null." extensions should be null."
INDEX { tedAreaId, tedRouterId, tedLinkStateId, tedSwCapIndex } INDEX { tedAreaId, tedRouterId, tedLinkStateId, tedSwCapIndex }
::= { tedSwCapTable 1 } ::= { tedSwCapTable 1 }
TedSwCapEntry ::= SEQUENCE { TedSwCapEntry ::= SEQUENCE {
tedSwCapIndex Unsigned32, tedSwCapIndex Unsigned32,
tedSwCapSwitchingType IANAGmplsSwitchingTypeTC, tedSwCapSwitchingType IANAGmplsSwitchingTypeTC,
tedSwCapEncoding IANAGmplsLSPEncodingTypeTC, tedSwCapEncoding IANAGmplsLSPEncodingTypeTC,
tedSwCapMaxLspBandwidthPri0 Unsigned32, tedSwCapMaxLspBandwidthPri0 Unsigned32,
tedSwCapMaxLspBandwidthPri1 Unsigned32, tedSwCapMaxLspBandwidthPri1 Unsigned32,
tedSwCapMaxLspBandwidthPri2 Unsigned32, tedSwCapMaxLspBandwidthPri2 Unsigned32,
tedSwCapMaxLspBandwidthPri3 Unsigned32, tedSwCapMaxLspBandwidthPri3 Unsigned32,
tedSwCapMaxLspBandwidthPri4 Unsigned32, tedSwCapMaxLspBandwidthPri4 Unsigned32,
tedSwCapMaxLspBandwidthPri5 Unsigned32, tedSwCapMaxLspBandwidthPri5 Unsigned32,
tedSwCapMaxLspBandwidthPri6 Unsigned32, tedSwCapMaxLspBandwidthPri6 Unsigned32,
tedSwCapMaxLspBandwidthPri7 Unsigned32, tedSwCapMaxLspBandwidthPri7 Unsigned32,
draft-ietf-ccamp-gmpls-ted-mib-07.txt Aug. 2010
tedSwCapMinLspBandwidth Unsigned32, tedSwCapMinLspBandwidth Unsigned32,
tedSwCapIfMtu Integer32, tedSwCapIfMtu Integer32,
tedSwCapIndication INTEGER tedSwCapIndication INTEGER
} }
tedSwCapIndex OBJECT-TYPE tedSwCapIndex OBJECT-TYPE
SYNTAX Unsigned32(0..4294967295) SYNTAX Unsigned32 (1..255)
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This index is utilized to identify multiple switching "This index is utilized to identify multiple switching
functions on a local or remote TE link according to definitions of functions on a local or remote TE link according to definitions of
textual conventions of GMPLS [RFC4801]." textual conventions of GMPLS [RFC4801]."
::= { tedSwCapEntry 1 } ::= { tedSwCapEntry 1 }
tedSwCapSwitchingType OBJECT-TYPE tedSwCapSwitchingType OBJECT-TYPE
SYNTAX IANAGmplsSwitchingTypeTC SYNTAX IANAGmplsSwitchingTypeTC
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the GMPLS switching capability assigned "This object indicates the GMPLS switching capability assigned
to the TE link according to definitions of textual conventions of to the TE link according to definitions of textual conventions of
GMPLS [RFC4801]." GMPLS [RFC4801]."
REFERENCE
" OSPF Extensions in Support of GMPLS, RFC 4203, 1.4"
::= { tedSwCapEntry 2 } ::= { tedSwCapEntry 2 }
tedSwCapEncoding OBJECT-TYPE tedSwCapEncoding OBJECT-TYPE
SYNTAX IANAGmplsLSPEncodingTypeTC SYNTAX IANAGmplsLSPEncodingTypeTC
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the GMPLS encoding type assigned to the "This object indicates the GMPLS encoding type assigned to the
TE link." TE link."
REFERENCE
" OSPF Extensions in Support of GMPLS, RFC 4203, 1.4"
::= { tedSwCapEntry 3 } ::= { tedSwCapEntry 3 }
tedSwCapMaxLspBandwidthPri0 OBJECT-TYPE tedSwCapMaxLspBandwidthPri0 OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295) SYNTAX Unsigned32 (0..4294967295)
UNITS "Byte per seconds" UNITS "Byte per seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the maximum bandwidth of the TE link at "This object indicates the maximum bandwidth of the TE link at
the priority 0 for GMPLS LSP creation." the priority 0 for GMPLS LSP creation."
REFERENCE
" OSPF Extensions in Support of GMPLS, RFC 4203, 1.4"
::= { tedSwCapEntry 4 } ::= { tedSwCapEntry 4 }
tedSwCapMaxLspBandwidthPri1 OBJECT-TYPE tedSwCapMaxLspBandwidthPri1 OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295) SYNTAX Unsigned32 (0..4294967295)
UNITS "Byte per seconds" UNITS "Byte per seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
draft-ietf-ccamp-gmpls-ted-mib-07.txt Aug. 2010
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the maximum bandwidth of the TE link at "This object indicates the maximum bandwidth of the TE link at
the priority 1 for GMPLS LSP creation." the priority 1 for GMPLS LSP creation."
REFERENCE
" OSPF Extensions in Support of GMPLS, RFC 4203, 1.4"
::= { tedSwCapEntry 5 } ::= { tedSwCapEntry 5 }
tedSwCapMaxLspBandwidthPri2 OBJECT-TYPE tedSwCapMaxLspBandwidthPri2 OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295) SYNTAX Unsigned32 (0..4294967295)
UNITS "Byte per seconds" UNITS "Byte per seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the maximum bandwidth of the TE link at "This object indicates the maximum bandwidth of the TE link at
the priority 2 for GMPLS LSP creation." the priority 2 for GMPLS LSP creation."
REFERENCE
" OSPF Extensions in Support of GMPLS, RFC 4203, 1.4"
::= { tedSwCapEntry 6 } ::= { tedSwCapEntry 6 }
tedSwCapMaxLspBandwidthPri3 OBJECT-TYPE tedSwCapMaxLspBandwidthPri3 OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295) SYNTAX Unsigned32 (0..4294967295)
UNITS "Byte per seconds" UNITS "Byte per seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the maximum bandwidth of the TE link at "This object indicates the maximum bandwidth of the TE link at
the priority 3 for GMPLS LSP creation." the priority 3 for GMPLS LSP creation."
REFERENCE
" OSPF Extensions in Support of GMPLS, RFC 4203, 1.4"
::= { tedSwCapEntry 7 } ::= { tedSwCapEntry 7 }
tedSwCapMaxLspBandwidthPri4 OBJECT-TYPE tedSwCapMaxLspBandwidthPri4 OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295) SYNTAX Unsigned32 (0..4294967295)
UNITS "Byte per seconds" UNITS "Byte per seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the maximum bandwidth of the TE link at "This object indicates the maximum bandwidth of the TE link at
the priority 4 for GMPLS LSP creation." the priority 4 for GMPLS LSP creation."
REFERENCE
" OSPF Extensions in Support of GMPLS, RFC 4203, 1.4"
::= { tedSwCapEntry 8 } ::= { tedSwCapEntry 8 }
tedSwCapMaxLspBandwidthPri5 OBJECT-TYPE tedSwCapMaxLspBandwidthPri5 OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295) SYNTAX Unsigned32 (0..4294967295)
UNITS "Byte per seconds" UNITS "Byte per seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the maximum bandwidth of the TE link at "This object indicates the maximum bandwidth of the TE link at
the priority 5 for GMPLS LSP creation." the priority 5 for GMPLS LSP creation."
REFERENCE
" OSPF Extensions in Support of GMPLS, RFC 4203, 1.4"
draft-ietf-ccamp-gmpls-ted-mib-07.txt Aug. 2010
::= { tedSwCapEntry 9 } ::= { tedSwCapEntry 9 }
tedSwCapMaxLspBandwidthPri6 OBJECT-TYPE tedSwCapMaxLspBandwidthPri6 OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295) SYNTAX Unsigned32 (0..4294967295)
UNITS "Byte per seconds" UNITS "Byte per seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the maximum bandwidth of the TE link at "This object indicates the maximum bandwidth of the TE link at
the priority 6 for GMPLS LSP creation." the priority 6 for GMPLS LSP creation."
REFERENCE
" OSPF Extensions in Support of GMPLS, RFC 4203, 1.4"
::= { tedSwCapEntry 10 } ::= { tedSwCapEntry 10 }
tedSwCapMaxLspBandwidthPri7 OBJECT-TYPE tedSwCapMaxLspBandwidthPri7 OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295) SYNTAX Unsigned32 (0..4294967295)
UNITS "Byte per seconds" UNITS "Byte per seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the maximum bandwidth of the TE link at "This object indicates the maximum bandwidth of the TE link at
the priority 7 for GMPLS LSP creation." the priority 7 for GMPLS LSP creation."
REFERENCE
" OSPF Extensions in Support of GMPLS, RFC 4203, 1.4"
::= { tedSwCapEntry 11 } ::= { tedSwCapEntry 11 }
tedSwCapMinLspBandwidth OBJECT-TYPE tedSwCapMinLspBandwidth OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295) SYNTAX Unsigned32 (0..4294967295)
UNITS "Byte per seconds" UNITS "Byte per seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the minimum bandwidth of the TE link for "This object indicates the minimum bandwidth of the TE link for
GMPLS LSP creation if the switching capability field is TDM, PSC-1, GMPLS LSP creation if the switching capability field is TDM, PSC-1,
PSC-2, PSC-3, or PSC-4." PSC-2, PSC-3, or PSC-4."
REFERENCE
" OSPF Extensions in Support of GMPLS, RFC 4203, 1.4"
::= { tedSwCapEntry 12 } ::= { tedSwCapEntry 12 }
tedSwCapIfMtu OBJECT-TYPE tedSwCapIfMtu OBJECT-TYPE
SYNTAX Integer32 SYNTAX Integer32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the MTU of the local or remote TE link" "This object indicates the MTU of the local or remote TE link."
REFERENCE
" OSPF Extensions in Support of GMPLS, RFC 4203, 1.4"
::= { tedSwCapEntry 13 } ::= { tedSwCapEntry 13 }
tedSwCapIndication OBJECT-TYPE tedSwCapIndication OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
standard (0), standard (0),
arbitrary (1) arbitrary (1)
} }
draft-ietf-ccamp-gmpls-ted-mib-07.txt Aug. 2010
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates whether the interface supports Standard "This object indicates whether the interface supports Standard
or Arbitrary SONET/SDH." or Arbitrary SONET SDH."
REFERENCE
" OSPF Extensions in Support of GMPLS, RFC 4203, 1.4"
::= { tedSwCapEntry 14 } ::= { tedSwCapEntry 14 }
-- --
-- TED SRLG Table -- TED SRLG Table
-- --
tedSrlgTable OBJECT-TYPE tedSrlgTable OBJECT-TYPE
SYNTAX SEQUENCE OF TedSrlgEntry SYNTAX SEQUENCE OF TedSrlgEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table contains the SRLG information of the TE link." "This table contains the SRLG information of the TE link."
::= { tedObjects 7 } ::= { tedObjects 8 }
tedSrlgEntry OBJECT-TYPE tedSrlgEntry OBJECT-TYPE
SYNTAX TedSrlgEntry SYNTAX TedSrlgEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This entry relates each TE link with its SRLG information." "This entry relates each TE link with its SRLG information."
INDEX { tedAreaId, tedRouterId, tedLinkStateId, tedSrlgIndex } INDEX { tedAreaId, tedRouterId, tedLinkStateId, tedSrlgIndex }
::= { tedSrlgTable 1 } ::= { tedSrlgTable 1 }
TedSrlgEntry ::= SEQUENCE { TedSrlgEntry ::= SEQUENCE {
tedSrlgIndex Unsigned32, tedSrlgIndex Unsigned32,
tedSrlg Integer32 tedSrlg Integer32
} }
tedSrlgIndex OBJECT-TYPE tedSrlgIndex OBJECT-TYPE
SYNTAX Unsigned32(0..4294967295) SYNTAX Unsigned32(1..255)
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This index is utilized to identify multiple SRLG values on a "This index is utilized to identify multiple SRLG values on a
local or remote TE link." local or remote TE link."
::= { tedSrlgEntry 1 } ::= { tedSrlgEntry 1 }
tedSrlg OBJECT-TYPE tedSrlg OBJECT-TYPE
SYNTAX Integer32 SYNTAX Integer32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicate the SRLG value assigned to a local or "This object indicate the SRLG value assigned to a local or
remote TE link" remote TE link"
REFERENCE
" OSPF Extensions in Support of GMPLS, RFC 4203, 1.3"
::= { tedSrlgEntry 2 } ::= { tedSrlgEntry 2 }
draft-ietf-ccamp-gmpls-ted-mib-07.txt Aug. 2010
--
--NotificationObjectTable
--
tedNotificationObjectEntry OBJECT IDENTIFIER
::= { tedObjects 9 }
tedNotificationAreaId OBJECT-TYPE
SYNTAX AreaID
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The area identifier of the IGP for notification."
::= { tedNotificationObjectEntry 1 }
tedNotificationRouterId OBJECT-TYPE
SYNTAX RouterID
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The router identifier for notification"
::= { tedNotificationObjectEntry 2 }
tedNotificationLinkStateId OBJECT-TYPE
SYNTAX LinkStateID
MAX-ACCESS accessible-for-notify
STATUS current
DESCRIPTION
"The link state identifier for notification"
::= { tedNotificationObjectEntry 3 }
-- --
-- Notifications -- Notifications
-- --
tedStatusChange NOTIFICATION-TYPE tedStatusChange NOTIFICATION-TYPE
OBJECTS { OBJECTS {
tedAreaId, tedRouterId, tedLinkStateId tedNotificationAreaId, tedNotificationRouterId,
tedNotificationLinkStateId
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This notification signifies that there has been change in TE "This notification signifies that there has been change in TE
information of tedTable, teLocalIfIpAddrTable, teRemoteIfIpAddrTable, information of tedTable, tedLocalIfAddrTable, tedRemoteIfAddrTable,
teSwCapTable and teSrlgTable. For example, this should be generated tedSwCapTable and tedSrlgTable. For example, this should be generated
when tedUnreservedBandwidth is changed to create or delete LSP using when tedUnreservedBandwidth is changed to create or delete LSP using
registered TE link. " registered TE link. "
::= { tedNotifications 1 } ::= { tedNotifications 1 }
tedCreation NOTIFICATION-TYPE tedCreation NOTIFICATION-TYPE
OBJECTS { OBJECTS {
tedAreaId, tedRouterId, tedLinkStateId tedNotificationAreaId, tedNotificationRouterId,
tedNotificationLinkStateId
draft-ietf-ccamp-gmpls-ted-mib-07.txt Aug. 2010
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This notification signifies that there has been new " This notification signifies that there has been new
registration in ted table by receiving new TE link information. For registration in ted table by receiving new TE link information. For
example, this should be generated when new index (tedAreaId, example, this should be generated when new index (tedAreaId,
tedRouterId and tedLinkStateId) is registered in TED table." tedRouterId and tedLinkStateId) is registered in TED table."
::= { tedNotifications 2 } ::= { tedNotifications 2 }
tedDeletion NOTIFICATION-TYPE tedDeletion NOTIFICATION-TYPE
OBJECTS { OBJECTS {
tedAreaId, tedRouterId, tedLinkStateId tedNotificationAreaId, tedNotificationRouterId,
tedNotificationLinkStateId
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This notification signifies that there has been deletion of "This notification signifies that there has been deletion of
existing entries in ted table. For example, this should be generated existing entries in ted table. For example, this should be generated
when one of existing entries is deleted in TED table." when one of existing entries is deleted in TED table."
::= { tedNotifications 3 } ::= { tedNotifications 3 }
-- Conformance Statement -- Conformance Statement
tedGroups
OBJECT IDENTIFIER ::= { tedConformance 1 }
tedCompliances tedCompliances
OBJECT IDENTIFIER ::= { tedConformance 1 }
tedGroups
OBJECT IDENTIFIER ::= { tedConformance 2 } OBJECT IDENTIFIER ::= { tedConformance 2 }
-- Module Compliance -- Module Compliance
teModuleFullCompliance MODULE-COMPLIANCE tedModuleFullCompliance MODULE-COMPLIANCE
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Compliance statement for agents provides full support for the "Compliance statement for agents provides full support for the
TED MIB." TED MIB."
MODULE -- this module MODULE -- this module
MANDATORY-GROUPS { tedMainGroup, MANDATORY-GROUPS { tedMainGroup,
tedObjectsGroup tedObjectsGroup,
tedNotificationObjectGroup,
tedNotificationGroup
} }
GROUP tedNotificationGroup GROUP tedUnnumberedLinkGroup
DESCRIPTION
"This group is mandatory for TE links that supports the
unnumbered links."
GROUP tedNumberedLinkGroup
DESCRIPTION DESCRIPTION
"This group is mandatory for those implementations that can implement "This group is mandatory for TE links that supports the numbered
the notifications contained in this group." links."
GROUP tedSwCapGroup
DESCRIPTION
draft-ietf-ccamp-gmpls-ted-mib-07.txt Aug. 2010
"This group is mandatory for TE links that supports GMPLS
switching capability."
GROUP tedSwCapMinLspBandwidthGroup
DESCRIPTION
"This group is mandatory for TE links if the switching
capability field is TDM, PSC-1, PSC-2, PSC-3, or PSC-4."
GROUP tedSwCapIfMtuGroup
DESCRIPTION
"This group is mandatory for TE links that supports the MTU of
the local or remote TE link."
GROUP tedSwCapIndicationGroup
DESCRIPTION
"This group is mandatory for TE links that supports Standard or
Arbitrary SONET/SDH."
GROUP tedSrlgGroup
DESCRIPTION
"This group is mandatory for TE links that supports SRLG
information."
::= { tedCompliances 1 } ::= { tedCompliances 1 }
-- --
-- ReadOnly Compliance -- ReadOnly Compliance
-- --
teModuleReadOnlyCompliance MODULE-COMPLIANCE tedModuleReadOnlyCompliance MODULE-COMPLIANCE
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Compliance requirement for implementations only provide read- "Compliance requirement for implementations only provide read-
only support for TED. Such devices can then be monitored but cannot only support for TED. Such devices can then be monitored but cannot
be configured using this MIB module." be configured using this MIB module."
MODULE -- this module MODULE -- this module
MANDATORY-GROUPS { tedMainGroup MANDATORY-GROUPS { tedMainGroup
} }
GROUP tedUnnumberedLinkGroup
DESCRIPTION
"This group is mandatory for TE links that supports the
unnumbered links."
GROUP tedNumberedLinkGroup
DESCRIPTION
"This group is mandatory for TE links that supports the numbered
links."
GROUP tedSwCapGroup
DESCRIPTION
"This group is mandatory for TE links that supports some GMPLS
switching capabilities."
draft-ietf-ccamp-gmpls-ted-mib-07.txt Aug. 2010
GROUP tedSwCapMinLspBandwidthGroup
DESCRIPTION
"This group is mandatory for TE links if the switching
capability field is TDM, PSC-1, PSC-2, PSC-3, or PSC-4."
GROUP tedSwCapIfMtuGroup
DESCRIPTION
"This group is mandatory for TE links that supports the MTU of
the local or remote TE link."
GROUP tedSwCapIndicationGroup
DESCRIPTION
"This group is mandatory for TE links that supports Standard or
Arbitrary SONET/SDH."
GROUP tedSrlgGroup
DESCRIPTION
"This group is mandatory for TE links that supports SRLG
information."
::= { tedCompliances 2 } ::= { tedCompliances 2 }
-- Units of conformance. -- Units of conformance
tedMainGroup OBJECT-GROUP tedMainGroup OBJECT-GROUP
OBJECTS { OBJECTS {
tedAreaId ,
tedRouterId ,
tedLinkStateId ,
tedLinkInformationSource , tedLinkInformationSource ,
tedLinkType , tedLinkType ,
tedRouterIdAddrType , tedRouterIdAddrType ,
tedRouterIdAddr , tedRouterIdAddr ,
tedLinkIdAddrType , tedLinkIdAddrType ,
tedLinkIdAddr , tedLinkIdAddr ,
tedMetric , tedMetric ,
tedMaxBandwidth , tedMaxBandwidth ,
tedMaxReservableBandwidth , tedMaxReservableBandwidth ,
tedUnreservedBandwidthPri0 , tedUnreservedBandwidthPri0 ,
tedUnreservedBandwidthPri1 , tedUnreservedBandwidthPri1 ,
tedUnreservedBandwidthPri2 , tedUnreservedBandwidthPri2 ,
tedUnreservedBandwidthPri3 , tedUnreservedBandwidthPri3 ,
tedUnreservedBandwidthPri4 , tedUnreservedBandwidthPri4 ,
tedUnreservedBandwidthPri5 , tedUnreservedBandwidthPri5 ,
tedUnreservedBandwidthPri6 , tedUnreservedBandwidthPri6 ,
tedUnreservedBandwidthPri7 , tedUnreservedBandwidthPri7 ,
tedAdministrativeGroup , tedAdministrativeGroup ,
tedLocalId ,
tedRemoteId ,
tedLinkProtectionType , tedLinkProtectionType ,
tedLinkInformationData , tedLinkInformationData
tedLocalIfAddrType ,
tedLocalIfAddr ,
tedRemoteIfAddrType ,
tedRemoteIfAddr ,
tedSwCapSwitchingType ,
tedSwCapEncoding ,
tedSwCapMaxLspBandwidthPri0 ,
tedSwCapMaxLspBandwidthPri1 ,
tedSwCapMaxLspBandwidthPri2 ,
tedSwCapMaxLspBandwidthPri3 ,
tedSwCapMaxLspBandwidthPri4 ,
tedSwCapMaxLspBandwidthPri5 ,
tedSwCapMaxLspBandwidthPri6 ,
tedSwCapMaxLspBandwidthPri7 ,
tedSwCapMinLspBandwidth ,
tedSwCapIfMtu ,
tedSwCapIndication ,
tedSrlg
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Collection of objects for TED management." "Collection of objects for TED management"
::= { tedGroups 1 } ::= { tedGroups 1 }
tedObjectsGroup OBJECT-GROUP tedObjectsGroup OBJECT-GROUP
OBJECTS { OBJECTS {
tedNotificationEnabled,
tedNotificationMaxRate draft-ietf-ccamp-gmpls-ted-mib-07.txt Aug. 2010
tedInfoStatus,
tedCreateDeleteNotificationMaxRate,
tedStatusChangeNotificationMaxRate
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This objects needed to implement notification." "This objects needed to implement notification."
::= { tedGroups 2 } ::= { tedGroups 2 }
tedNotificationObjectGroup OBJECT-GROUP
OBJECTS {
tedNotificationAreaId,
tedNotificationRouterId,
tedNotificationLinkStateId
}
STATUS current
DESCRIPTION
"These objects used to record notification parameter"
::= { tedGroups 3 }
tedNotificationGroup NOTIFICATION-GROUP tedNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS { NOTIFICATIONS {
tedStatusChange, tedStatusChange,
tedCreation, tedCreation,
tedDeletion tedDeletion
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates a set of notifications implemented in this " This group is mandatory for those implementations that can
module." implement the notifications contained in this group. "
::= { tedGroups 3 } ::= { tedGroups 4 }
tedUnnumberedLinkGroup OBJECT-GROUP
OBJECTS {
tedLocalId,
tedRemoteId
}
STATUS current
DESCRIPTION
"This objects needed to implement the unnumbered links."
::= { tedGroups 5 }
tedNumberedLinkGroup OBJECT-GROUP
OBJECTS {
tedLocalIfAddrType,
tedLocalIfAddr,
tedRemoteIfAddrType,
tedRemoteIfAddr
}
STATUS current
DESCRIPTION
"This objects needed to implement the numbered links."
::= { tedGroups 6 }
draft-ietf-ccamp-gmpls-ted-mib-07.txt Aug. 2010
tedSwCapGroup OBJECT-GROUP
OBJECTS {
tedSwCapSwitchingType,
tedSwCapEncoding,
tedSwCapMaxLspBandwidthPri0,
tedSwCapMaxLspBandwidthPri1,
tedSwCapMaxLspBandwidthPri2,
tedSwCapMaxLspBandwidthPri3,
tedSwCapMaxLspBandwidthPri4,
tedSwCapMaxLspBandwidthPri5,
tedSwCapMaxLspBandwidthPri6,
tedSwCapMaxLspBandwidthPri7
}
STATUS current
DESCRIPTION
"This objects needed to implement TE links with its GMPLS TE
switching capability information."
::= { tedGroups 7 }
tedSwCapMinLspBandwidthGroup OBJECT-GROUP
OBJECTS {
tedSwCapMinLspBandwidth
}
STATUS current
DESCRIPTION
"This objects needed to implement the minimum bandwidth of the
TE link for GMPLS LSP creation."
::= { tedGroups 8 }
tedSwCapIfMtuGroup OBJECT-GROUP
OBJECTS {
tedSwCapIfMtu
}
STATUS current
DESCRIPTION
"This objects needed to implement the MTU information of the
local or remote TE link."
::= { tedGroups 9 }
tedSwCapIndicationGroup OBJECT-GROUP
OBJECTS {
tedSwCapIndication
}
STATUS current
DESCRIPTION
"This objects needed to implement the indication whether the
interface supports Standard or Arbitrary SONET/SDH."
::= { tedGroups 10 }
tedSrlgGroup OBJECT-GROUP
OBJECTS {
tedSrlg
}
STATUS current
draft-ietf-ccamp-gmpls-ted-mib-07.txt Aug. 2010
DESCRIPTION
"This objects needed to implement multiple SRLG values with
GMPLS TE information."
::= { tedGroups 11 }
END END
8. Security Consideration 8. Security Consideration
There are some management objects defined in this MIB module that There is a number of management objects defined in this MIB module
have a MAX-ACCESS clause of read-write and/or read-create. So, if that has a MAX-ACCESS clause of read-write.. Such objects may be
this MIB module is implemented correctly, then there is no risk that considered sensitive or vulnerable in some network environments. The
an intruder can alter or create any management objects of this MIB support for SET operations in a non-secure environment without proper
module via direct SNMP SET operations. protection can have a negative effect on network operations.
Some of the readable objects in this MIB module (i.e., objects with a Some of the readable objects in this MIB module (i.e., objects with a
MAX-ACCESS other than not-accessible) may be considered sensitive or MAX-ACCESS other than not-accessible) may be considered sensitive or
vulnerable in some network environments. It is thus important to vulnerable in some network environments. It is thus important to
control even GET and/or NOTIFY access to these objects and possibly control even GET and/or NOTIFY access to these objects and possibly
to even encrypt the values of these objects when sending them over to even encrypt the values of these objects when sending them over
the network via SNMP. These are the tables and objects and their the network via SNMP. These are the tables and objects and their
sensitivity/vulnerability: sensitivity/vulnerability:
- tedTable, teLocalIfAddrTable, teRemoteIfAddrTable, teSWcaptable tedTable, tedLocalIfAddrTable, tedRemoteIfAddrTable, tedSwCapTable
and teSrlgtable contain topology information for the MPLS/GMPLS and tedSrlgTable contain topology information for the MPLS/GMPLS
network. If an administrator does not want to reveal this information, network. If an administrator does not want to reveal this
then these tables should be considered sensitive/vulnerable. information, then these tables should be considered
sensitive/vulnerable.
SNMP versions prior to SNMPv3 did not include adequate security. Even SNMP versions prior to SNMPv3 did not include adequate security. Even
if the network itself is secure (for example by using IPsec), even if the network itself is secure (for example by using IPsec), even
then, there is no control as to who on the secure network is allowed then, there is no control as to who on the secure network is allowed
to access and GET/SET (read/change/create/delete) the objects in this to access and GET/SET (read/change/create/delete) the objects in this
MIB module. MIB module.
It is RECOMMENDED that implementers consider the security features as It is RECOMMENDED that implementers consider the security features as
provided by the SNMPv3 framework (see [RFC3410], section 8), provided by the SNMPv3 framework (see [RFC3410], section 8),
including full support for the SNMPv3 cryptographic mechanisms (for including full supports for the SNMPv3 cryptographic mechanisms (for
authentication and privacy). authentication and privacy).
Further, deployment of SNMP versions prior to SNMPv3 is NOT Further, deployment of SNMP versions prior to SNMPv3 is NOT
RECOMMENDED. Instead, it is RECOMMENDED to deploy SNMPv3 and to RECOMMENDED. Instead, it is RECOMMENDED to deploy SNMPv3 and to
enable cryptographic security. It is then a customer/operator enable cryptographic security. It is then a customer/operator
responsibility to ensure that the SNMP entity giving access to an responsibility to ensure that the SNMP entity giving access to an
instance of this MIB module is properly configured to give access to instance of this MIB module is properly configured to give access to
the objects only to those principles (users) that have legitimate the objects only to those principles (users) that have legitimate
rights to indeed GET or SET (change/create/delete) them. rights to indeed GET or SET (change/create/delete) them.
9. IANA Considerations 9. IANA Considerations
draft-ietf-ccamp-gmpls-ted-mib-07.txt Aug. 2010
The following "IANA Considerations" subsection requests IANA for a The following "IANA Considerations" subsection requests IANA for a
new assignment under the transmission subtree. New assignments can new assignment under the transmission subtree. New assignments can
only be made via a Standards Action as specified in [RFC5226]. only be made via a Standards Action as specified in [RFC5226].
9.1 IANA Considerations for TED-MIB 9.1 IANA Considerations for TED-MIB
The IANA is requested to assign { transmission XXX } to the TED-MIB The IANA is requested to assign { transmission XXX } to the TED-MIB
module specified in this document. module specified in this document.
10. References 10. References
skipping to change at page 25, line 10 skipping to change at page 30, line 44
[RFC4801] T. Nadeau and A. Farrel, Ed., "Definitions of Textual [RFC4801] T. Nadeau and A. Farrel, Ed., "Definitions of Textual
Conventions for Generalized Multiprotocol Label Switching Conventions for Generalized Multiprotocol Label Switching
(GMPLS) Management", RFC4801, Feb. 2007. (GMPLS) Management", RFC4801, Feb. 2007.
10.2 Informative References 10.2 Informative References
[RFC4750] Dan Joyal, et al, "OSPF Version 2 Management Information [RFC4750] Dan Joyal, et al, "OSPF Version 2 Management Information
Base", RFC4750, December 2006. Base", RFC4750, December 2006.
[RFC5643] Dan Joyal, et al, "Management Information Base for OSPFv3
", RFC5643, August 2009.
[RFC4444] J. Parker, et al, "Management Information Base for [RFC4444] J. Parker, et al, "Management Information Base for
Intermediate System to Intermediate System (IS-IS)", RFC Intermediate System to Intermediate System (IS-IS)", RFC
4444, April 2006. 4444, April 2006.
[RFC4202] K. Kompella, and Y. Rekhter, "Routing Extensions in [RFC4202] K. Kompella, and Y. Rekhter, "Routing Extensions in
Support of Generalized Multi-Protocol Label Switching", Support of Generalized Multi-Protocol Label Switching",
RFC4202, Oct. 2005. RFC4202, Oct. 2005.
[RFC3630] D. Katz, et al, "Traffic Engineering (TE) Extensions to [RFC3630] D. Katz, et al, "Traffic Engineering (TE) Extensions to
OSPF Version2", RFC3630, September 2003. OSPF Version2", RFC3630, September 2003.
[RFC4205] K. Kompella, and Y. Rekhter, "Intermediate System to [RFC4205] K. Kompella, and Y. Rekhter, "Intermediate System to
Intermediate System (IS-IS) Extensions in Support of Intermediate System (IS-IS) Extensions in Support of
draft-ietf-ccamp-gmpls-ted-mib-07.txt Aug. 2010
Multi-Protocol Label Switching (GMPLS)", RFC4205, Oct. Multi-Protocol Label Switching (GMPLS)", RFC4205, Oct.
2005. 2005.
[RFC3784] H. Smit and T. Li, "IS-IS extensions for Traffic [RFC3784] H. Smit and T. Li, "IS-IS extensions for Traffic
Engineering", RFC 3784, June 2004. Engineering", RFC 3784, June 2004.
[RFC3812] Srinivasan, C., Viswanathan, A., and T. Nadeau, [RFC3812] Srinivasan, C., Viswanathan, A., and T. Nadeau,
"Multiprotocol Label Switching (MPLS) Traffic Engineering "Multiprotocol Label Switching (MPLS) Traffic Engineering
(TE) Management Information Base (MIB)", RFC 3812, June (TE) Management Information Base (MIB)", RFC 3812, June
2004. 2004.
skipping to change at page 26, line 12 skipping to change at page 31, line 49
IANA Considerations Section in RFCs" BCP 26, RFC 5226, May IANA Considerations Section in RFCs" BCP 26, RFC 5226, May
2008. 2008.
[RFC3410] J. Case, R. Mundy, D. pertain, B.Stewart, "Introduction [RFC3410] J. Case, R. Mundy, D. pertain, B.Stewart, "Introduction
and Applicability Statement for Internet Standard and Applicability Statement for Internet Standard
Management Framework", RFC 3410, December 2002. Management Framework", RFC 3410, December 2002.
[RFC4220] M. Dubuc, T. D. Nadeu and J. Lang, " Traffic Engineering [RFC4220] M. Dubuc, T. D. Nadeu and J. Lang, " Traffic Engineering
Link Management Information Base ", RFC4220, December 2005. Link Management Information Base ", RFC4220, December 2005.
[RFC2328] J. Moy, " OSPF version2 ", RFC2328, April 1998.
[RFC5340] R. Coltun, D. Ferguson, J. Moy, A.Lindem " OSPF for IPv6",
RFC5340, July 2008.
[RFC5329] K. Ishiguro, V. Manral, A. Davey, A.Lindem " Traffic
Engineering Extensions to OSPF Version 3 ", RFC5329,
September 2008.
11. Acknowledgment 11. Acknowledgment
draft-ietf-ccamp-gmpls-ted-mib-07.txt Aug. 2010
The authors wish to acknowledge and thank the following individuals The authors wish to acknowledge and thank the following individuals
for their valuable comments to this document: Ken Nagami, Shuichi for their valuable comments to this document: Ken Nagami, Shuichi
Okamoto, Adrian Farrel and Diego Caviglia. Okamoto, Adrian Farrel and Diego Caviglia.
12. Authors' Addresses 12. Authors' Addresses
Tomohiro Otani Tomohiro Otani
KDDI Corporation KDDI Corporation
KDDI Bldg, KDDI Bldg,
2-3-2, Nishishinjuku, Shinjuku-ku, Tokyo, 2-3-2, Nishishinjuku, Shinjuku-ku, Tokyo,
skipping to change at page 26, line 44 skipping to change at line 1772
Thomas D. Nadeau Thomas D. Nadeau
BT BT
Email: tom.nadeau@bt.com Email: tom.nadeau@bt.com
Kenji Kumaki Kenji Kumaki
KDDI Corporation KDDI Corporation
Garden Air Tower Garden Air Tower
Iidabashi, Chyoda-ku, Tokyo, Iidabashi, Chyoda-ku, Tokyo,
102-8460, Japan 102-8460, Japan
Email: ke-kumaki@kddi.com Email: ke-kumaki@kddi.com
13. Intellectual Property Statement
The IETF Trust takes no position regarding the validity or scope of
any Intellectual Property Rights or other rights that might be
claimed to pertain to the implementation or use of the technology
described in any IETF Document or the extent to which any license
under such rights might or might not be available; nor does it
represent that it has made any independent effort to identify any
such rights.
Copies of Intellectual Property disclosures made to the IETF
Secretariat and any assurances of licenses to be made available, or
the result of an attempt made to obtain a general license or
permission for the use of such proprietary rights by implementers or
users of this specification can be obtained from the IETF on-line IPR
repository at http://www.ietf.org/ipr
The IETF invites any interested party to bring to its attention any
copyrights, patents or patent applications, or other proprietary
rights that may cover technology that may be required to implement
any standard or specification contained in an IETF Document. Please
address the information to the IETF at ietf-ipr@ietf.org.
The definitive version of an IETF Document is that published by, or
under the auspices of, the IETF. Versions of IETF Documents that are
published by third parties, including those that are translated into
other languages, should not be considered to be definitive versions
of IETF Documents. The definitive version of these Legal Provisions
is that published by, or under the auspices of, the IETF. Versions of
these Legal Provisions that are published by third parties, including
those that are translated into other languages, should not be
considered to be definitive versions of these Legal Provisions.
For the avoidance of doubt, each Contributor to the IETF Standards
Process licenses each Contribution that he or she makes as part of
the IETF Standards Process to the IETF Trust pursuant to the
provisions of RFC 5378. No language to the contrary, or terms,
conditions or rights that differ from or are inconsistent with the
rights and licenses granted under RFC 5378, shall have any effect and
shall be null and void, whether published or posted by such
Contributor, or included with or in such Contribution.
Disclaimer of Validity
All IETF Documents and the information contained therein are provided
on an "AS IS" basis and THE CONTRIBUTOR, THE ORGANIZATION HE/SHE
REPRESENTS OR IS SPONSORED BY (IF ANY), THE INTERNET SOCIETY, THE
IETF TRUST AND THE INTERNET ENGINEERING TASK FORCE DISCLAIM ALL
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO ANY
WARRANTY THAT THE USE OF THE INFORMATION THEREIN WILL NOT INFRINGE
ANY RIGHTS OR ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE.
Copyright Statement
Copyright (c) 2009 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents in effect on the date of
publication of this document (http://trustee.ietf.org/license-info).
Please review these documents carefully, as they describe your rights
and restrictions with respect to this document.
 End of changes. 135 change blocks. 
192 lines changed or deleted 624 lines changed or added

This html diff was produced by rfcdiff 1.38. The latest version is available from http://tools.ietf.org/tools/rfcdiff/