draft-ietf-ccamp-gmpls-ted-mib-07.txt   draft-ietf-ccamp-gmpls-ted-mib-08.txt 
INTERNET-DRAFT Masanori Miyazawa INTERNET-DRAFT Masanori Miyazawa
Intended status: Standards Truck KDDI R&D Labs Intended status: Standards Truck KDDI R&D Labs
Expires: January 02, 2011 Tomohiro Otani Expires: October 16, 2011
KDDI Corporation Tomohiro Otani
Thomas Nadeau Kenji Kumaki
BT KDDI Corporation
Kenji Kumaki
KDDI Corporation Thomas D. Nadeau
August 02, 2010
April 15, 2011
Traffic Engineering Database Management Information Base in support of Traffic Engineering Database Management Information Base in support of
MPLS-TE/GMPLS MPLS-TE/GMPLS
draft-ietf-ccamp-gmpls-ted-mib-07.txt draft-ietf-ccamp-gmpls-ted-mib-08.txt
Status of this Memo Status of this Memo
This Internet-Draft is submitted to IETF in full conformance with This Internet-Draft is submitted to IETF in full conformance with
the provisions of BCP 78 and BCP 79. the provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF), its areas, and its working groups. Note that other Task Force (IETF), its areas, and its working groups. Note that other
groups may also distribute working documents as Internet-Drafts. groups may also distribute working documents as Internet-Drafts.
Internet-Drafts are draft documents valid for a maximum of six months Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress." material or to cite them other than as "work in progress."
The list of current Internet-Drafts can be accessed at The list of current Internet-Drafts can be accessed at
http://www.ietf.org/ietf/1id-abstracts.txt http://www.ietf.org/ietf/1id-abstracts.txt
The list of Internet-Draft Shadow Directories can be accessed at The list of Internet-Draft Shadow Directories can be accessed at
http://www.ietf.org/shadow.html. http://www.ietf.org/shadow.html.
Copyright and License Notice Copyright Notice
Copyright (c) 2010 IETF Trust and the persons identified as the Copyright (c) 2011 IETF Trust and the persons identified as the
document authors. All rights reserved. document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info) in effect on the date of (http://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License. described in the Simplified BSD License.
Abstract Abstract
This memo defines the Management Information Base (MIB) objects in This memo defines the Management Information Base (MIB) objects in
order to manage traffic engineering database (TED) information with order to manage traffic engineering database (TED) information with
extension in support of Multi-Protocol Label Switching (MPLS) with extension in support of Multi-Protocol Label Switching (MPLS) with
draft-ietf-ccamp-gmpls-ted-mib-07.txt Aug. 2010
traffic engineering (TE) as well as Generalized MPLS (GMPLS) for use traffic engineering (TE) as well as Generalized MPLS (GMPLS) for use
with network management protocols. with network management protocols.
Table of Contents Table of Contents
Status of this Memo................................................... 1 Status of this Memo................................................... 1
Abstract.............................................................. 1 Abstract.............................................................. 2
1. The Internet-Standard Management Framework......................... 2 1. The Internet-Standard Management Framework......................... 3
2. Introduction....................................................... 3 2. Introduction....................................................... 3
3. Overview........................................................... 3 3. Overview........................................................... 3
3.1 Conventions used in this document................................. 3 3.1 Conventions used in this document................................. 3
3.2 Terminology....................................................... 3 3.2 Terminology....................................................... 3
3.3 Acronyms.......................................................... 3 3.3 Acronyms.......................................................... 4
4. Motivations........................................................ 4 4. Motivations........................................................ 4
5. Brief description of MIB Objects................................... 4 5. Brief description of MIB Objects................................... 4
5.1 tedTable.......................................................... 4 5.1 tedTable.......................................................... 4
5.2 tedLocalIfAddrTable............................................... 4 5.2 tedLocalIfAddrTable............................................... 4
5.3 tedRemoteIfAddrTable.............................................. 4 5.3 tedRemoteIfAddrTable.............................................. 4
5.4 tedSwCapTable..................................................... 4 5.4 tedSwCapTable..................................................... 5
5.5 tedSrlgTable...................................................... 4 5.5 tedSrlgTable...................................................... 5
6. Example of the TED MIB module usage................................ 4 6. Example of the TED MIB module usage................................ 5
7. TED MIB Definitions in support of GMPLS............................ 6 7. TED MIB Definitions in support of GMPLS............................ 6
8. Security consideration............................................ 29 8. Security consideration............................................ 28
9. IANA Considerations............................................... 29 9. IANA Considerations............................................... 29
9.1 IANA Considerations for TED-MIB.................................. 30 9.1 IANA Considerations for TED-MIB.................................. 29
10. References....................................................... 30 10. References....................................................... 29
10.1 Normative References............................................ 30 10.1 Normative References............................................ 29
10.2 Informative References.......................................... 30 10.2 Informative References.......................................... 29
11. Acknowledgment................................................... 31 11. Acknowledgment................................................... 31
12. Authors' Addresses............................................... 32 12. Authors' Addresses............................................... 31
1. The Internet-Standard Management Framework 1. The Internet-Standard Management Framework
For a detailed overview of the documents that describe the current For a detailed overview of the documents that describe the current
Internet-Standard Management Framework, please refer to section 7 of Internet-Standard Management Framework, please refer to section 7 of
RFC 3410 [RFC3410]. RFC 3410 [RFC3410].
Managed objects are accessed via a virtual information store, termed Managed objects are accessed via a virtual information store, termed
the Management Information Base or MIB. MIB objects are generally the Management Information Base or MIB. MIB objects are generally
accessed through the Simple Network Management Protocol (SNMP). accessed through the Simple Network Management Protocol (SNMP).
Objects in the MIB are defined using the mechanisms defined in the Objects in the MIB are defined using the mechanisms defined in the
Structure of Management Information (SMI). This memo specifies a MIB Structure of Management Information (SMI). This memo specifies a MIB
module that is compliant to the SMIv2, which is described in STD 58, module that is compliant to the SMIv2, which is described in STD 58,
RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58, RFC 2580 RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58, RFC 2580
[RFC2580]. [RFC2580].
draft-ietf-ccamp-gmpls-ted-mib-07.txt Aug. 2010
2. Introduction 2. Introduction
The OSPF MIB is defined as [RFC4750] and the ISIS MIB as [RFC4444]. The OSPF MIB was originally defined for OSPF version2 in support of
On the other side, MPLS/GMPLS based traffic engineering has so far IPv4 [RFC4750] and extended to support the Internet Protocol
extended OSPF/ISIS routing protocol with TE functionality [RFC4202], version6(IPv6) as OSPF version3 MIB [RFC5643]. The ISIS MIB is also
[RFC3630], [RFC4205], [RFC3784]. To manage such MPLS-TE/GMPLS defined as [RFC4444]. On the other side, MPLS/GMPLS based traffic
networks effectively, routing information associated with MPLS/GMPLS engineering has so far extended OSPF/ISIS routing protocol with TE
TE parameters (TED) is preferred for the network management, however, functionality [RFC4202], [RFC3630], [RFC5329], [RFC5307], [RFC5305].
there is no clear definition of MPLS/GMPLS TE information in existing To manage such MPLS-TE/GMPLS networks effectively, routing
MIBs related to OSPF/ISIS. information associated with MPLS/GMPLS TE parameters (TED) is
preferred for the network management, however, there is no clear
definition of MPLS/GMPLS TE information in existing MIBs related to
OSPF(v2 and v3)/ISIS.
This memo defines the Management Information Base (MIB) objects for This memo defines the Management Information Base (MIB) objects for
managing TED in support of MPLS-TE/GMPLS for use with network managing TED in support of MPLS-TE/GMPLS for use with network
management protocols. management protocols.
This MIB module should be used in conjunction with OSPF/ISIS MIB as This MIB module should be used in conjunction with OSPFv2 MIB, OSPF
well as other MIBs defined in [RFC3812], [RFC3813], [RFC4802], v3 MIB and ISIS MIB as well as other MIBs defined in [RFC3812],
[RFC4803] for the management of MPLS/GMPLS based traffic engineering [RFC3813], [RFC4802], [RFC4803] for the management of MPLS/GMPLS
information. based traffic engineering information.
3. Overview 3. Overview
3.1 Conventions used in this document 3.1 Conventions used in this document
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
document are to be interpreted as described in RFC-2119 [RFC2119]. document are to be interpreted as described in RFC-2119 [RFC2119].
3.2 Terminology 3.2 Terminology
Definitions of key terms for MPLS OAM and GMPLS are found in Definitions of key terms for MPLS OAM and GMPLS are found in
[RFC4377] and [RFC3945], and the reader is assumed to be familiar [RFC4377] and [RFC3945], and the reader is assumed to be familiar
with those definitions which are not repeated here. with those definitions which are not repeated here.
3.3 Acronyms 3.3 Acronyms
FSC: Fiber switch capable
GMPLS: Generalized Multi-Protocol Label Switching GMPLS: Generalized Multi-Protocol Label Switching
ISIS: Intermediate System to Intermediate System
LDP: Label Distribution Protocol LDP: Label Distribution Protocol
LSA: Link state advertisement
LSC: Lambda switch capable
LSP: Label Switching Path LSP: Label Switching Path
LSR: Label Switching Router LSR: Label Switching Router
MIB: Management Information Base MIB: Management Information Base
OAM: Operations and Management OAM: Operations and Management
OA&M: Operations, Administration and Maintenance. OA&M: Operations, Administration and Maintenance.
OSPF: Open Shortest Path First OSPF: Open Shortest Path First
ISIS: Intermediate System to Intermediate System PSC: Packet switch capable
RSVP: Resource reSerVation Protocol RSVP: Resource reSerVation Protocol
SRLG: Shared risk link group
TE: Traffic Engineering TE: Traffic Engineering
PSC: Packet switch capable TED: Traffic Engineering Database
LSC: Lambda switch capable
FSC: Fiber switch capable
TDM: Time Division Multiplexing TDM: Time Division Multiplexing
SRLG: Shared risk link group
LSA: Link state advertisement
draft-ietf-ccamp-gmpls-ted-mib-07.txt Aug. 2010
4. Motivations 4. Motivations
The existing OSPF, ISIS, MPLS and GMPLS MIBs do not provide for the The existing OSPFv2, OSPFv3, ISIS, MPLS and GMPLS MIBs do not provide
management of all of the extensions to the OSPF and ISIS protocol. for the management interface to retrieve topology information of MPLS
and GMPLS networks.
5. Brief description of MIB Objects 5. Brief description of MIB Objects
The objects described in this section support the management of TED The objects described in this section support the management of TED
described in [RFC4202], [RFC4203] and [RFC4205] for GMPLS extensions described in [RFC4202], [RFC4203] and [RFC5307] for GMPLS extensions
as well as in [RFC3630] and [RFC3784] for MPLS/GMPLS. as well as in [RFC3630] and [RFC5305] for MPLS/GMPLS.
5.1 tedTable 5.1 tedTable
The tedTable is basically used to indicate TED information of OSPF-TE The tedTable is basically used to indicate TED information of OSPF-TE
or ISIS-TE. However, this table does not contain the information of or ISIS-TE. However, this table does not contain information for
Local/Remote interface IP address, Interface Switching Capability Local/Remote interface IP address, Interface Switching Capability
Descriptor and Shared Risk Link Group information within the sub-TLVs Descriptor and Shared Risk Link Group information within the sub-TLVs
for the Link-TLV. for the Link-TLV.
5.2 tedLocalIfAddrTable 5.2 tedLocalIfAddrTable
The tedLocalIfAddrTable is identical to the Local interface IP The tedLocalIfAddrTable is identical to the Local interface IP
address information in a sub-TLV for the Link-TLV. This is address information in a sub-TLV for the Link-TLV. This is
independently defined, because the Interface IP Address sub-TLV may independently defined, because the Interface IP Address sub-TLV may
appear more than once within the same Link-TLV. appear more than once within the same Link-TLV.
5.3 tedRemoteIfAddrTable 5.3 tedRemoteIfAddrTable
The tedRemoteIfAddrTable is identical to the Remote interface IP The tedRemoteIfAddrTable is identical to the Remote interface IP
address information in a sub-TLV of the Link-TLV. This is also address information in a sub-TLV of the Link-TLV. Also, this is
independently utilized, because one or more local interface IP utilized independently because one or more local interface IP address
address sub TLVs may exist in the same Link-TLV. sub TLVs may exist in the same Link-TLV.
5.4 tedSwCapTable 5.4 tedSwCapTable
The tedSwCapTable represents Interface Switching Capability The tedSwCapTable represents Interface Switching Capability
Descriptor information. This is independently defined due to the Descriptor information. This is independently defined due to the
possibility of multiple appearances of the sub TLV within the same possibility of multiple appearances of the sub TLV within the same
Link-TLV. Link-TLV.
5.5 tedSrlgTable 5.5 tedSrlgTable
The tedSrlgTable contains the Sub-TLV information of Shared Risk Link The tedSrlgTable contains the Sub-TLV information of Shared Risk Link
Group (SRLG) information. This is separately defined, because more Group (SRLG) information. This is separately defined, because more
than one sub TLVs may appear in the same Link-TLV. than one sub TLVs may appear in the same Link-TLV.
6.Example of the TED MIB Module Usage 6.Example of the TED MIB Module Usage
In this section, we provide an example of the TED MIB module usage. In this section, we provide an example of the TED MIB module usage.
The following indicates the information of a numbered TE link The following indicates the information of a numbered TE link
originated in a GMPLS controlled node. When TE link information is originated in a GMPLS controlled node. When TE link information is
draft-ietf-ccamp-gmpls-ted-mib-07.txt Aug. 2010
retrieved in a MPLS network, GMPLS specific objects such as retrieved in a MPLS network, GMPLS specific objects such as
tedLocalIfAddrTable, tedRemoteIfAddrTable, tedSwCapTable and tedLocalIfAddrTable, tedRemoteIfAddrTable, tedSwCapTable and
tedSrlgTable are not supported. tedSrlgTable are not supported.
Note that the TED MIB modules are only limited to "read-only" access Note that the TED MIB modules are only limited to "read-only" access
except for tedCreateDeleteNotificationMaxRate and except for tedCreatedDeletedNotificationMaxRate and
tedStatusChangeNotificationMaxRate. The TED MIB is designed to be tedStatusChangeNotificationMaxRate. The TED MIB is designed to be
independent of OSPF or ISIS MIBs, however each TE information belongs independent of OSPF or ISIS MIBs, however each TE link information
to a node or a link, which is managed by the routing protocol. belongs to a node or a link which is managed by the routing protocol.
In tedTable: In tedTable:
{ {
tedAreaId.0.3221225985.16777264 0 tedAreaId.0.3221225985.16777264 0
tedRouterId.0.3221225985.16777264 1848783410 tedRouterId.0.3221225985.16777264 1848783410
tedLinkStateId.0.3221225985.16777264 805306369 tedLinkStateId.0.3221225985.16777264 805306369
tedLinkInformationSource.0.3221225985.16777264 ospf(2) tedLinkInformationSource.0.3221225985.16777264 ospf(2)
tedLinkInformationData.0.3221225985.16777264 zeroDotZero tedLinkInformationData.0.3221225985.16777264 zeroDotZero
tedLinkType.0.3221225985.16777264 pointToPoint(1) tedLinkType.0.3221225985.16777264 pointToPoint(1)
tedLinkState.0.3221225985.16777264 up(1)
tedRouterIdAddrType.0.3221225985.16777264 ipv4(1) tedRouterIdAddrType.0.3221225985.16777264 ipv4(1)
tedRouterIdAddr.0.3221225985.16777264192.0.2.1 tedRouterIdAddr.0.3221225985.16777264192.0.2.1
tedLinkIdAddrType.0.3221225985.16777264 ipv4(1) tedLinkIdAddrType.0.3221225985.16777264 ipv4(1)
tedLinkIdAddr.0.3221225985.16777264 192.0.2.10 tedLinkIdAddr.0.3221225985.16777264 192.0.2.10
tedMetric.0.3221225985.16777264 1 tedMetric.0.3221225985.16777264 1
tedMaxBandwidth.0.3221225985.167772641376193201 tedMaxBandwidth.0.3221225985.167772641376193201
tedMaxReservableBandwidth.0.3221225985.16777264 1376193201 tedMaxReservableBandwidth.0.3221225985.16777264 1376193201
tedUnreservedBandwidthPri0.0.3221225985.16777264 1375888025 tedUnreservedBandwidthPri0.0.3221225985.16777264 1375888025
tedUnreservedBandwidthPri1.0.3221225985.16777264 1375888025 tedUnreservedBandwidthPri1.0.3221225985.16777264 1375888025
tedUnreservedBandwidthPri2.0.3221225985.16777264 1375888025 tedUnreservedBandwidthPri2.0.3221225985.16777264 1375888025
skipping to change at page 5, line 59 skipping to change at page 6, line 25
} }
In tedRemoteIfAddrTable: In tedRemoteIfAddrTable:
{ {
tedRemoteIfAddrType.0.3221225985.16777264.0 ipv4(1) tedRemoteIfAddrType.0.3221225985.16777264.0 ipv4(1)
tedRemoteIfAddr.0.3221225985.16777264.0 192.0.2.22 tedRemoteIfAddr.0.3221225985.16777264.0 192.0.2.22
} }
In tedSwCapTable: In tedSwCapTable:
{ {
tedSwCapSwitchingType.0.3221225985.16777264.1lsc(150) tedSwCapType.0.3221225985.16777264.1 lsc(150)
tedSwCapEncoding.0.3221225985.16777264.1 ethernet(2) tedSwCapEncoding.0.3221225985.16777264.1 ethernet(2)
draft-ietf-ccamp-gmpls-ted-mib-07.txt Aug. 2010
tedSwCapMaxLspBandwidthPri0.0.3221225985.16777264.1 1375888025 tedSwCapMaxLspBandwidthPri0.0.3221225985.16777264.1 1375888025
tedSwCapMaxLspBandwidthPri1.0.3221225985.16777264.1 1375888025 tedSwCapMaxLspBandwidthPri1.0.3221225985.16777264.1 1375888025
tedSwCapMaxLspBandwidthPri2.0.3221225985.16777264.1 1375888025 tedSwCapMaxLspBandwidthPri2.0.3221225985.16777264.1 1375888025
tedSwCapMaxLspBandwidthPri3.0.3221225985.16777264.1 1375888025 tedSwCapMaxLspBandwidthPri3.0.3221225985.16777264.1 1375888025
tedSwCapMaxLspBandwidthPri4.0.3221225985.16777264.1 1375888025 tedSwCapMaxLspBandwidthPri4.0.3221225985.16777264.1 1375888025
tedSwCapMaxLspBandwidthPri5.0.3221225985.16777264.1 1375888025 tedSwCapMaxLspBandwidthPri5.0.3221225985.16777264.1 1375888025
tedSwCapMaxLspBandwidthPri6.0.3221225985.16777264.1 1375888025 tedSwCapMaxLspBandwidthPri6.0.3221225985.16777264.1 1375888025
tedSwCapMaxLspBandwidthPri7.0.3221225985.16777264.1 1375888025 tedSwCapMaxLspBandwidthPri7.0.3221225985.16777264.1 1375888025
tedSwCapMinLspBandwidth.0.3221225985.16777264.1 0 tedSwCapMinLspBandwidth.0.3221225985.16777264.1 0
tedSwCapIfMtu.0.3221225985.16777264.10 tedSwCapIfMtu.0.3221225985.16777264.10
skipping to change at page 6, line 37 skipping to change at page 7, line 4
TED-MIB DEFINITIONS ::= BEGIN TED-MIB DEFINITIONS ::= BEGIN
IMPORTS IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32, transmission, MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32, transmission,
NOTIFICATION-TYPE NOTIFICATION-TYPE
FROM SNMPv2-SMI -- RFC2578 FROM SNMPv2-SMI -- RFC2578
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF -- RFC2580 FROM SNMPv2-CONF -- RFC2580
TEXTUAL-CONVENTION, RowPointer TEXTUAL-CONVENTION, RowPointer
FROM SNMPv2-TC -- RFC2579 FROM SNMPv2-TC -- RFC2579
IANAGmplsLSPEncodingTypeTC, IANAGmplsSwitchingTypeTC IANAGmplsLSPEncodingTypeTC, IANAGmplsSwitchingTypeTC
FROM IANA-GMPLS-TC-MIB -- RFC4801 FROM IANA-GMPLS-TC-MIB -- RFC4802
InetAddress, InetAddressType InetAddress, InetAddressType
FROM INET-ADDRESS-MIB -- RFC3291 FROM INET-ADDRESS-MIB -- RFC3291
; ;
tedMIB MODULE-IDENTITY tedMIB MODULE-IDENTITY
LAST-UPDATED "201008020000Z" -- 02 August 2010 00:00:00 GMT LAST-UPDATED "201104150000Z" -- 15 April 2011 00:00:00 GMT
ORGANIZATION "IETF CCAMP Working Group." ORGANIZATION "IETF CCAMP Working Group."
CONTACT-INFO CONTACT-INFO
" Tomohiro Otani " Tomohiro Otani
otani@kddilabs.jp otani@kddilabs.jp
Masanori Miyazawa Masanori Miyazawa
ma-miyazawa@kddilabs.jp ma-miyazawa@kddilabs.jp
Thomas D. Nadeau Thomas D. Nadeau
tnadeau@bt.com tnadeau@lucidvision.com
Kenji Kumaki Kenji Kumaki
ke-kumaki@kddilabs.jp ke-kumaki@kddilabs.jp
Comments and discussion to ccamp@ietf.org" Comments and discussion to ccamp@ietf.org"
draft-ietf-ccamp-gmpls-ted-mib-07.txt Aug. 2010
DESCRIPTION DESCRIPTION
"This MIB contains managed object definitions for TED in "This MIB contains managed object definitions for TED in
support of MPLS/GMPLS TE Database. support of MPLS/GMPLS TE Database.
Copyright (C) 2009 The IETF Trust. This version of this MIB Copyright (C) 2011 The IETF Trust. This version of this MIB
module is part of RFC xxx; see the RFC itself for full legal module is part of RFC xxx; see the RFC itself for full legal
notices." notices."
-- Revision history. -- Revision history.
REVISION REVISION
"201008020000Z" -- 02 August 2010 00:00:00 GMT "201104150000Z" -- 15 April 2011 00:00:00 GMT
DESCRIPTION DESCRIPTION
"Initial version. Published as RFC xxx." "Initial version. Published as RFC xxx."
-- RFC-editor pls fill in yyy -- RFC-editor pls fill in yyy
::= { transmission yyy } ::= { transmission yyy }
-- assigned by IANA, see section 9.1 for details -- assigned by IANA, see section 9.1 for details
-- Textual Conventions. -- Textual Conventions.
AreaID ::= TEXTUAL-CONVENTION TedAreaIdTC ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d" DISPLAY-HINT "d"
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The area identifier of the IGP. If OSPF is used to "The area identifier of the IGP. If OSPF is used to
advertise LSA, this represents an ospfArea. If ISIS is used, this advertise LSA, this represents an ospfArea. If ISIS is used, this
represents an area address." represents an area address."
SYNTAX Unsigned32 (1..4294967295) SYNTAX Unsigned32 (1..4294967295)
RouterID ::= TEXTUAL-CONVENTION TedRouterIdTC ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d" DISPLAY-HINT "d"
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" The router identifier. If OSPF is used to advertise LSA, " The router identifier. If OSPF is used to advertise LSA,
this represents a Router ID. If ISIS is used, this represents a this represents a Router ID. If ISIS is used, this represents a
System ID." System ID."
SYNTAX Unsigned32 (1..4294967295) SYNTAX Unsigned32 (1..4294967295)
LinkStateID ::= TEXTUAL-CONVENTION TedLinkStateIdTC ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d" DISPLAY-HINT "d"
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" The link state identifier. If OSPF is used, this " The link state identifier. If OSPF is used, this
represents an ospfLsdbID. If ISIS is used, this represents an represents an ospfLsdbID. If ISIS is used, this represents an
isisLSPID." isisLSPID."
SYNTAX Unsigned32 (1..4294967295) SYNTAX Unsigned32 (1..4294967295)
-- Top level components of this MIB. -- Top level components of this MIB.
tedNotifications OBJECT IDENTIFIER ::= { tedMIB 0 } tedNotifications OBJECT IDENTIFIER ::= { tedMIB 0 }
tedObjects OBJECT IDENTIFIER ::= { tedMIB 1 } tedObjects OBJECT IDENTIFIER ::= { tedMIB 1 }
tedConformance OBJECT IDENTIFIER ::= { tedMIB 2 } tedConformance OBJECT IDENTIFIER ::= { tedMIB 2 }
-- --
-- Ted Objects
--
draft-ietf-ccamp-gmpls-ted-mib-07.txt Aug. 2010
tedCreateDeleteNotificationMaxRate OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A lot of notifications relating to new registration in ted
table by receiving new TE link information or deletion of existing
entries in ted table are expected to generate in a node. This object
provides the maximum number of notifications generated per minute. "
DEFVAL {0}
::= { tedObjects 1 }
tedStatusChangeNotificationMaxRate OBJECT-TYPE
SYNTAX Unsigned32
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"A lot of notifications relating to the status change are
expected to generate in a node, especially when a network failure
occurs and might cause a performance degradation of the node itself.
To avoid such a defect, this object provides the maximum number of
notifications generated per minute. If events occur more rapidly,
the implementation may simply fail to emit these notifications during
that period, or may queue them until an appropriate time. A value of
0 means no throttling is applied and events may be notified at the
rate at which they occur."
DEFVAL {0}
::= { tedObjects 2 }
tedInfoStatus OBJECT-TYPE
SYNTAX INTEGER {
inUse(1),
notInUse(2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object represents the value of states to check if the
objects in this MIB is currently in use or not. When there are any
configurations for the TED in a router, this object represents
inUse(1). Otherwise, when there is no configuration, this object
represent notInUse(2). "
::={ tedObjects 3 }
--
-- TED Table -- TED Table
-- --
tedTable OBJECT-TYPE tedTable OBJECT-TYPE
SYNTAX SEQUENCE OF TedEntry SYNTAX SEQUENCE OF TedEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
draft-ietf-ccamp-gmpls-ted-mib-07.txt Aug. 2010
"This table indicates multiple TED information which has been "This table indicates multiple TED information which has been
supported by [RFC3630]." supported by [RFC3630]."
::= { tedObjects 4 } ::= { tedObjects 1 }
tedEntry OBJECT-TYPE tedEntry OBJECT-TYPE
SYNTAX TedEntry SYNTAX TedEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This entry contains TED information commonly utilized in both "This entry contains TED information commonly utilized in both
MPLS and GMPLS." MPLS and GMPLS."
INDEX { tedAreaId, tedRouterId, tedLinkStateId } INDEX { tedAreaId, tedRouterId, tedLinkStateId }
::= { tedTable 1 } ::= { tedTable 1 }
TedEntry ::= SEQUENCE { TedEntry ::= SEQUENCE {
tedAreaId AreaID, tedAreaId TedAreaIdTC,
tedRouterId RouterID, tedRouterId TedRouterIdTC,
tedLinkStateId LinkStateID, tedLinkStateId TedLinkStateIdTC,
tedLinkInformationSource INTEGER, tedLinkInformationSource INTEGER,
tedLinkInformationData RowPointer, tedLinkInformationData RowPointer,
tedLinkState INTEGER,
tedLinkType INTEGER, tedLinkType INTEGER,
tedRouterIdAddrType InetAddressType, tedRouterIdAddrType InetAddressType,
tedRouterIdAddr InetAddress, tedRouterIdAddr InetAddress,
tedLinkIdAddrType InetAddressType, tedLinkIdAddrType InetAddressType,
tedLinkIdAddr InetAddress, tedLinkIdAddr InetAddress,
tedMetric Integer32, tedMetric Integer32,
tedMaxBandwidth Unsigned32, tedMaxBandwidth Unsigned32,
tedMaxReservableBandwidth Unsigned32, tedMaxReservableBandwidth Unsigned32,
tedUnreservedBandwidthPri0 Unsigned32, tedUnreservedBandwidthPri0 Unsigned32,
tedUnreservedBandwidthPri1 Unsigned32, tedUnreservedBandwidthPri1 Unsigned32,
skipping to change at page 9, line 50 skipping to change at page 9, line 23
tedUnreservedBandwidthPri5 Unsigned32, tedUnreservedBandwidthPri5 Unsigned32,
tedUnreservedBandwidthPri6 Unsigned32, tedUnreservedBandwidthPri6 Unsigned32,
tedUnreservedBandwidthPri7 Unsigned32, tedUnreservedBandwidthPri7 Unsigned32,
tedAdministrativeGroup Integer32, tedAdministrativeGroup Integer32,
tedLocalId Integer32, tedLocalId Integer32,
tedRemoteId Integer32, tedRemoteId Integer32,
tedLinkProtectionType BITS tedLinkProtectionType BITS
} }
tedAreaId OBJECT-TYPE tedAreaId OBJECT-TYPE
SYNTAX AreaID SYNTAX TedAreaIdTC
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the area identifier of the IGP. If OSPF "This object indicates the area identifier of the IGP. If OSPF
is used to advertise LSA, this represents an ospfArea. If ISIS is is used to advertise LSA, this represents an ospfArea. If ISIS is
used, this represents an area address. Otherwise, this represents used, this represents an area address. Otherwise, this represents
zero." zero."
REFERENCE REFERENCE
" OSPF Version 2, RFC2328, C.2 " OSPF Version 2, RFC2328, C.2
OSPF for IPv6, RFC5340, C.2 " OSPF for IPv6, RFC5340, C.2 "
draft-ietf-ccamp-gmpls-ted-mib-07.txt Aug. 2010
::= { tedEntry 1 } ::= { tedEntry 1 }
tedRouterId OBJECT-TYPE tedRouterId OBJECT-TYPE
SYNTAX RouterID SYNTAX TedRouterIdTC
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the router identifier. If OSPF is used "This object indicates the router identifier. If OSPF is used
to advertise LSA, this represents a Router ID. If ISIS is used, this to advertise LSA, this represents a Router ID. If ISIS is used, this
represents a System ID. Otherwise, this represents zero." represents a System ID. Otherwise, this represents zero."
REFERENCE REFERENCE
" OSPF Version 2, RFC2328, C.1 " OSPF Version 2, RFC2328, C.1
OSPF for IPv6, RFC5340, C.1 " OSPF for IPv6, RFC5340, C.1 "
::= { tedEntry 2 } ::= { tedEntry 2 }
tedLinkStateId OBJECT-TYPE tedLinkStateId OBJECT-TYPE
SYNTAX LinkStateID SYNTAX TedLinkStateIdTC
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the link state identifier. If OSPF is "This object indicates the link state identifier. If OSPF is
used, this represents an ospfLsdbID. If ISIS is used, this represents used, this represents an ospfLsdbID. If ISIS is used, this represents
an isisLSPID. Otherwise, this represents a unique identifier within a an isisLSPID. Otherwise, this represents a unique identifier within a
node." node."
REFERENCE REFERENCE
"OSPF Version 2, RFC2328, A.4.1, "OSPF Version 2, RFC2328, A.4.1,
OSPF for IPv6, RFC5340, A.4.2" OSPF for IPv6, RFC5340, A.4.2"
skipping to change at page 11, line 4 skipping to change at page 10, line 33
::= { tedEntry 4 } ::= { tedEntry 4 }
tedLinkInformationData OBJECT-TYPE tedLinkInformationData OBJECT-TYPE
SYNTAX RowPointer SYNTAX RowPointer
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object cross-references the source of the information "This object cross-references the source of the information
about this TE link and should be interpretted in the context of about this TE link and should be interpretted in the context of
tedLinkInformationSource. tedLinkInformationSource.
draft-ietf-ccamp-gmpls-ted-mib-07.txt Aug. 2010
If tedLinkInformationSource has the value unknown(0), this If tedLinkInformationSource has the value unknown(0), this
object SHOULD contain a value of zeroDotZero. object SHOULD contain a value of zeroDotZero.
If tedLinkInformationSource has the value If tedLinkInformationSource has the value
locallyConfigured(1), this object MAY contain the identifier of locallyConfigured(1), this object MAY contain the identifier of
the corresponding row entry in the teLinkTable of TE-LINK-STD- the corresponding row entry in the teLinkTable of TE-LINK-STD-
MIB[RFC4220], the identifier of the corresponding row in a local MIB[RFC4220], the identifier of the corresponding row in a local
proprietary TE link MIB module, or the value of zeroDotZero proprietary TE link MIB module, or the value of zeroDotZero
otherwise. otherwise.
If tedLinkInformationSource has the value ospfv2(2)and If tedLinkInformationSource has the value ospfv2(2)and
ospfv3(3), this object MAY contain the identifier of the ospfv3(3), this object MAY contain the identifier of the
skipping to change at page 11, line 30 skipping to change at page 10, line 56
If tedLinkInformationSource has the value isis(4) this object If tedLinkInformationSource has the value isis(4) this object
MAY contain the identifier of the corresponding row entry in the MAY contain the identifier of the corresponding row entry in the
isisAreaAddr of ISIS-MIB [RFC4444], or the value of zeroDotZero isisAreaAddr of ISIS-MIB [RFC4444], or the value of zeroDotZero
otherwise. otherwise.
If tedLinkInformationSource has the value other(5) this If tedLinkInformationSource has the value other(5) this
object MAY contain the identifier of the corresponding row entry object MAY contain the identifier of the corresponding row entry
a local proprietary MIB module, or the value of zeroDotZero a local proprietary MIB module, or the value of zeroDotZero
otherwise." otherwise."
::= { tedEntry 5 } ::= { tedEntry 5 }
tedLinkState OBJECT-TYPE
SYNTAX INTEGER {
unknown (0),
up (1),
down (2)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This object represents the actual operational state of this
TE link. For instance, if a row is created in the tedTable, but the
actual TE link is not available for some reason (e.g. when there is
not yet physical link or manually disable), then the object would be
down(2) state. In contrast, if a row is added and the TE link is
available, this would be operationally up(1)."
::= { tedEntry 6 }
tedLinkType OBJECT-TYPE tedLinkType OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
pointToPoint (1), pointToPoint (1),
multiAccess (2) multiAccess (2)
} }
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the type of the link such as point-to-point or "This indicates the type of the link such as point-to-point or
multi-access." multi-access."
REFERENCE REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, RFC " Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
3630, 2.5.1" 3630, 2.5.1"
::= { tedEntry 7 }
::= { tedEntry 6 }
tedRouterIdAddrType OBJECT-TYPE tedRouterIdAddrType OBJECT-TYPE
SYNTAX InetAddressType SYNTAX InetAddressType
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object indicates the TE-Router ID address type. Only " This object indicates the TE-Router ID address type. Only
values unknown(0), ipv4(1) or ipv6(2) must be supported. " values unknown(0), ipv4(1) or ipv6(2) must be supported. "
::= { tedEntry 7 } ::= { tedEntry 8 }
tedRouterIdAddr OBJECT-TYPE tedRouterIdAddr OBJECT-TYPE
SYNTAX InetAddress SYNTAX InetAddress
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the TE-Router ID." "This object indicates the TE-Router ID."
draft-ietf-ccamp-gmpls-ted-mib-07.txt Aug. 2010
REFERENCE REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, RFC " Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
3630, 2.4.1" 3630, 2.4.1"
::= { tedEntry 8 } ::= { tedEntry 9 }
tedLinkIdAddrType OBJECT-TYPE tedLinkIdAddrType OBJECT-TYPE
SYNTAX InetAddressType SYNTAX InetAddressType
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object indicates the address type of the TE Link ID. " This object indicates the address type of the TE Link ID.
Only values unknown(0), ipv4(1) or ipv6(2) must be supported." Only values unknown(0), ipv4(1) or ipv6(2) must be supported."
::= { tedEntry 9 } ::= { tedEntry 10 }
tedLinkIdAddr OBJECT-TYPE tedLinkIdAddr OBJECT-TYPE
SYNTAX InetAddress SYNTAX InetAddress
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the Router ID of the neighbor in the case of "This indicates the Router ID of the neighbor in the case of
point-to-point links. This also indicates the interface address of point-to-point links. This also indicates the interface address of
the designated router in the case of multi-access links." the designated router in the case of multi-access links."
REFERENCE REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, RFC " Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
3630, 2.5.2" 3630, 2.5.2"
::= { tedEntry 10 } ::= { tedEntry 11 }
tedMetric OBJECT-TYPE tedMetric OBJECT-TYPE
SYNTAX Integer32 SYNTAX Integer32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the traffic engineering metric value of the TE "This indicates the traffic engineering metric value of the TE
link." link."
REFERENCE REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, RFC " Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
3630, 2.5.5" 3630, 2.5.5"
::= { tedEntry 11 } ::= { tedEntry 12 }
tedMaxBandwidth OBJECT-TYPE tedMaxBandwidth OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295) SYNTAX Unsigned32 (0..4294967295)
UNITS "Byte per seconds" UNITS "Byte per seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the maximum bandwidth that can be used on this "This indicates the maximum bandwidth that can be used on this
link in this direction." link in this direction."
REFERENCE REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, RFC " Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
3630, 2.5.6" 3630, 2.5.6"
::= { tedEntry 12 } ::= { tedEntry 13 }
tedMaxReservableBandwidth OBJECT-TYPE tedMaxReservableBandwidth OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295) SYNTAX Unsigned32 (0..4294967295)
draft-ietf-ccamp-gmpls-ted-mib-07.txt Aug. 2010
UNITS "Byte per seconds" UNITS "Byte per seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the maximum bandwidth that may be reserved on "This indicates the maximum bandwidth that may be reserved on
this link in this direction." this link in this direction."
REFERENCE REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, RFC " Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
3630, 2.5.7" 3630, 2.5.7"
::= { tedEntry 13 } ::= { tedEntry 14 }
tedUnreservedBandwidthPri0 OBJECT-TYPE tedUnreservedBandwidthPri0 OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295) SYNTAX Unsigned32 (0..4294967295)
UNITS "Byte per seconds" UNITS "Byte per seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the amount of bandwidth not yet reserved at the "This indicates the amount of bandwidth not yet reserved at the
priority 0." priority 0."
REFERENCE REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, RFC " Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
3630, 2.5.8" 3630, 2.5.8"
::= { tedEntry 14 } ::= { tedEntry 15 }
tedUnreservedBandwidthPri1 OBJECT-TYPE tedUnreservedBandwidthPri1 OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295) SYNTAX Unsigned32 (0..4294967295)
UNITS "Byte per seconds" UNITS "Byte per seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the amount of bandwidth not yet reserved at the "This indicates the amount of bandwidth not yet reserved at the
priority 1." priority 1."
REFERENCE REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, RFC " Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
3630, 2.5.8" 3630, 2.5.8"
::= { tedEntry 15 } ::= { tedEntry 16 }
tedUnreservedBandwidthPri2 OBJECT-TYPE tedUnreservedBandwidthPri2 OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295) SYNTAX Unsigned32 (0..4294967295)
UNITS "Byte per seconds" UNITS "Byte per seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the amount of bandwidth not yet reserved at the "This indicates the amount of bandwidth not yet reserved at the
priority 2." priority 2."
REFERENCE REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, RFC " Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
3630, 2.5.8" 3630, 2.5.8"
::= { tedEntry 16 } ::= { tedEntry 17 }
tedUnreservedBandwidthPri3 OBJECT-TYPE tedUnreservedBandwidthPri3 OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295) SYNTAX Unsigned32 (0..4294967295)
UNITS "Byte per seconds" UNITS "Byte per seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
draft-ietf-ccamp-gmpls-ted-mib-07.txt Aug. 2010
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the amount of bandwidth not yet reserved at the "This indicates the amount of bandwidth not yet reserved at the
priority 3." priority 3."
REFERENCE REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, RFC " Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
3630, 2.5.8" 3630, 2.5.8"
::= { tedEntry 17 } ::= { tedEntry 18 }
tedUnreservedBandwidthPri4 OBJECT-TYPE tedUnreservedBandwidthPri4 OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295) SYNTAX Unsigned32 (0..4294967295)
UNITS "Byte per seconds" UNITS "Byte per seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the amount of bandwidth not yet reserved at the "This indicates the amount of bandwidth not yet reserved at the
priority 4." priority 4."
REFERENCE REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, RFC " Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
3630, 2.5.8" 3630, 2.5.8"
::= { tedEntry 18 } ::= { tedEntry 19 }
tedUnreservedBandwidthPri5 OBJECT-TYPE tedUnreservedBandwidthPri5 OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295) SYNTAX Unsigned32 (0..4294967295)
UNITS "Byte per seconds" UNITS "Byte per seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the amount of bandwidth not yet reserved at the "This indicates the amount of bandwidth not yet reserved at the
priority 5." priority 5."
REFERENCE REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, RFC " Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
3630, 2.5.8" 3630, 2.5.8"
::= { tedEntry 19 } ::= { tedEntry 20 }
tedUnreservedBandwidthPri6 OBJECT-TYPE tedUnreservedBandwidthPri6 OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295) SYNTAX Unsigned32 (0..4294967295)
UNITS "Byte per seconds" UNITS "Byte per seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the amount of bandwidth not yet reserved at the "This indicates the amount of bandwidth not yet reserved at the
priority 6." priority 6."
REFERENCE REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, RFC " Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
3630, 2.5.8" 3630, 2.5.8"
::= { tedEntry 20 } ::= { tedEntry 21 }
tedUnreservedBandwidthPri7 OBJECT-TYPE tedUnreservedBandwidthPri7 OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295) SYNTAX Unsigned32 (0..4294967295)
UNITS "Byte per seconds" UNITS "Byte per seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
draft-ietf-ccamp-gmpls-ted-mib-07.txt Aug. 2010
"This indicates the amount of bandwidth not yet reserved at the "This indicates the amount of bandwidth not yet reserved at the
priority 7." priority 7."
REFERENCE REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, RFC " Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
3630, 2.5.8" 3630, 2.5.8"
::= { tedEntry 21 } ::= { tedEntry 22 }
tedAdministrativeGroup OBJECT-TYPE tedAdministrativeGroup OBJECT-TYPE
SYNTAX Integer32 SYNTAX Integer32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the Administrative Group which the link belong "This indicates the Administrative Group which the link belong
to. Since the value is a bit mask, the link can belong to multiple to. Since the value is a bit mask, the link can belong to multiple
groups. This is also called Resource Class/Color." groups. This is also called Resource Class/Color."
REFERENCE REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, RFC " Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
3630, 2.5.9" 3630, 2.5.9"
::= { tedEntry 22 } ::= { tedEntry 23 }
tedLocalId OBJECT-TYPE tedLocalId OBJECT-TYPE
SYNTAX Integer32 SYNTAX Integer32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the Link local identifier of an unnumbered "This indicates the Link local identifier of an unnumbered
link." link."
REFERENCE REFERENCE
" OSPF Extensions in Support of GMPLS, RFC 4203, 1.1" " OSPF Extensions in Support of GMPLS, RFC 4203, 1.1"
::= { tedEntry 23 } ::= { tedEntry 24 }
tedRemoteId OBJECT-TYPE tedRemoteId OBJECT-TYPE
SYNTAX Integer32 SYNTAX Integer32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the Link remote identifier of an unnumbered "This indicates the Link remote identifier of an unnumbered
link." link."
REFERENCE REFERENCE
" OSPF Extensions in Support of GMPLS, RFC 4203, 1.1" " OSPF Extensions in Support of GMPLS, RFC 4203, 1.1"
::= { tedEntry 24 } ::= { tedEntry 25 }
tedLinkProtectionType OBJECT-TYPE tedLinkProtectionType OBJECT-TYPE
SYNTAX BITS { SYNTAX BITS {
extraTraffic(0), extraTraffic(0),
unprotected(1), unprotected(1),
shared (2), shared (2),
dedicatedOneToOne (3), dedicatedOneToOne (3),
dedicatedOnePlusOne(4), dedicatedOnePlusOne(4),
enhanced(5) enhanced(5)
} }
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
draft-ietf-ccamp-gmpls-ted-mib-07.txt Aug. 2010
"This object indicates the protection type of the TE link." "This object indicates the protection type of the TE link."
REFERENCE REFERENCE
" OSPF Extensions in Support of GMPLS, RFC 4203, 1.2" " OSPF Extensions in Support of GMPLS, RFC 4203, 1.2"
::= { tedEntry 25 } ::= { tedEntry 26 }
-- --
-- TED Local Interface IP Address Table -- TED Local Interface IP Address Table
-- --
tedLocalIfAddrTable OBJECT-TYPE tedLocalIfAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF TedLocalIfAddrEntry SYNTAX SEQUENCE OF TedLocalIfAddrEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table contains the IP address information of a local TE "This table contains the IP address information of a local TE
link." link."
::= { tedObjects 5 } ::= { tedObjects 2 }
tedLocalIfAddrEntry OBJECT-TYPE tedLocalIfAddrEntry OBJECT-TYPE
SYNTAX TedLocalIfAddrEntry SYNTAX TedLocalIfAddrEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This entry contains the IP address information of the local TE "This entry contains the IP address information of the local TE
link." link."
INDEX { tedAreaId, tedRouterId, tedLinkStateId, INDEX { tedAreaId, tedRouterId, tedLinkStateId,
tedLocalIfAddrIndex } tedLocalIfAddrIndex }
skipping to change at page 17, line 4 skipping to change at page 16, line 49
SYNTAX InetAddressType SYNTAX InetAddressType
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the address type of the local TE link. "This object indicates the address type of the local TE link.
Only values unknown(0), ipv4(1) or ipv6(2) have to be supported." Only values unknown(0), ipv4(1) or ipv6(2) have to be supported."
::= { tedLocalIfAddrEntry 2 } ::= { tedLocalIfAddrEntry 2 }
tedLocalIfAddr OBJECT-TYPE tedLocalIfAddr OBJECT-TYPE
SYNTAX InetAddress SYNTAX InetAddress
draft-ietf-ccamp-gmpls-ted-mib-07.txt Aug. 2010
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the address of the local TE link." "This object indicates the address of the local TE link."
REFERENCE REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, RFC " Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
3630, 2.5.3, 3630, 2.5.3,
Traffic Engineering Extensions to OSPF Version3, RFC5329, Traffic Engineering Extensions to OSPF Version3, RFC5329,
4.3" 4.3"
::= { tedLocalIfAddrEntry 3 } ::= { tedLocalIfAddrEntry 3 }
skipping to change at page 17, line 29 skipping to change at page 17, line 17
-- TED Remote Interface IP Address Table -- TED Remote Interface IP Address Table
-- --
tedRemoteIfAddrTable OBJECT-TYPE tedRemoteIfAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF TedRemoteIfAddrEntry SYNTAX SEQUENCE OF TedRemoteIfAddrEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table contains the IP address information of a remote TE "This table contains the IP address information of a remote TE
link." link."
::= { tedObjects 6 } ::= { tedObjects 3 }
tedRemoteIfAddrEntry OBJECT-TYPE tedRemoteIfAddrEntry OBJECT-TYPE
SYNTAX TedRemoteIfAddrEntry SYNTAX TedRemoteIfAddrEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This entry contains the IP address information of the remote "This entry contains the IP address information of the remote
TE link." TE link."
INDEX { tedAreaId, tedRouterId, tedLinkStateId, INDEX { tedAreaId, tedRouterId, tedLinkStateId,
tedRemoteIfAddrIndex } tedRemoteIfAddrIndex }
skipping to change at page 18, line 4 skipping to change at page 17, line 49
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the index to identify multiple remote TE "This indicates the index to identify multiple remote TE
links." links."
::= { tedRemoteIfAddrEntry 1 } ::= { tedRemoteIfAddrEntry 1 }
tedRemoteIfAddrType OBJECT-TYPE tedRemoteIfAddrType OBJECT-TYPE
SYNTAX InetAddressType SYNTAX InetAddressType
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
draft-ietf-ccamp-gmpls-ted-mib-07.txt Aug. 2010
DESCRIPTION DESCRIPTION
"This object indicates the address type of the remote TE link." "This object indicates the address type of the remote TE link."
::= { tedRemoteIfAddrEntry 2 } ::= { tedRemoteIfAddrEntry 2 }
tedRemoteIfAddr OBJECT-TYPE tedRemoteIfAddr OBJECT-TYPE
SYNTAX InetAddress SYNTAX InetAddress
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the address of the remote TE link." "This object indicates the address of the remote TE link."
REFERENCE REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, RFC " Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
3630, 2.5.4, 3630, 2.5.4,
Traffic Engineering Extensions to OSPF Version3, RFC5329, Traffic Engineering Extensions to OSPF Version3, RFC5329,
4.4" 4.4"
::= { tedRemoteIfAddrEntry 3 } ::= { tedRemoteIfAddrEntry 3 }
-- --
-- TED Switch Capable Table -- TED Switching Capability Table
-- --
tedSwCapTable OBJECT-TYPE tedSwCapTable OBJECT-TYPE
SYNTAX SEQUENCE OF TedSwCapEntry SYNTAX SEQUENCE OF TedSwCapEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table contains the GMPLS TED switching capability "This table contains the GMPLS TED switching capability
information." information."
::= { tedObjects 7 } ::= { tedObjects 4 }
tedSwCapEntry OBJECT-TYPE tedSwCapEntry OBJECT-TYPE
SYNTAX TedSwCapEntry SYNTAX TedSwCapEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This entry relates each TE link with its GMPLS TE switching "This entry relates each TE link with its GMPLS TE switching
capability information. IF the MIB deals with only OSPF-TE capability information. IF the MIB deals with only OSPF-TE
information, the value of each object related with GMPLS TE information, the value of each object related with GMPLS TE
extensions should be null." extensions should be null."
INDEX { tedAreaId, tedRouterId, tedLinkStateId, tedSwCapIndex } INDEX { tedAreaId, tedRouterId, tedLinkStateId, tedSwCapIndex }
::= { tedSwCapTable 1 } ::= { tedSwCapTable 1 }
TedSwCapEntry ::= SEQUENCE { TedSwCapEntry ::= SEQUENCE {
tedSwCapIndex Unsigned32, tedSwCapIndex Unsigned32,
tedSwCapSwitchingType IANAGmplsSwitchingTypeTC, tedSwCapType IANAGmplsSwitchingTypeTC,
tedSwCapEncoding IANAGmplsLSPEncodingTypeTC, tedSwCapEncoding IANAGmplsLSPEncodingTypeTC,
tedSwCapMaxLspBandwidthPri0 Unsigned32, tedSwCapMaxLspBandwidthPri0 Unsigned32,
tedSwCapMaxLspBandwidthPri1 Unsigned32, tedSwCapMaxLspBandwidthPri1 Unsigned32,
tedSwCapMaxLspBandwidthPri2 Unsigned32, tedSwCapMaxLspBandwidthPri2 Unsigned32,
tedSwCapMaxLspBandwidthPri3 Unsigned32, tedSwCapMaxLspBandwidthPri3 Unsigned32,
tedSwCapMaxLspBandwidthPri4 Unsigned32, tedSwCapMaxLspBandwidthPri4 Unsigned32,
tedSwCapMaxLspBandwidthPri5 Unsigned32, tedSwCapMaxLspBandwidthPri5 Unsigned32,
tedSwCapMaxLspBandwidthPri6 Unsigned32, tedSwCapMaxLspBandwidthPri6 Unsigned32,
tedSwCapMaxLspBandwidthPri7 Unsigned32, tedSwCapMaxLspBandwidthPri7 Unsigned32,
draft-ietf-ccamp-gmpls-ted-mib-07.txt Aug. 2010
tedSwCapMinLspBandwidth Unsigned32, tedSwCapMinLspBandwidth Unsigned32,
tedSwCapIfMtu Integer32, tedSwCapIfMtu Integer32,
tedSwCapIndication INTEGER tedSwCapIndication INTEGER
} }
tedSwCapIndex OBJECT-TYPE tedSwCapIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..255) SYNTAX Unsigned32 (1..255)
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This index is utilized to identify multiple switching "This index is utilized to identify multiple switching
functions on a local or remote TE link according to definitions of functions on a local or remote TE link according to definitions of
textual conventions of GMPLS [RFC4801]." textual conventions of GMPLS [RFC4801]."
::= { tedSwCapEntry 1 } ::= { tedSwCapEntry 1 }
tedSwCapSwitchingType OBJECT-TYPE tedSwCapType OBJECT-TYPE
SYNTAX IANAGmplsSwitchingTypeTC SYNTAX IANAGmplsSwitchingTypeTC
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the GMPLS switching capability assigned "This object indicates the GMPLS switching capability assigned
to the TE link according to definitions of textual conventions of to the TE link according to definitions of textual conventions of
GMPLS [RFC4801]." GMPLS [RFC4801]."
REFERENCE REFERENCE
" OSPF Extensions in Support of GMPLS, RFC 4203, 1.4" " OSPF Extensions in Support of GMPLS, RFC 4203, 1.4"
::= { tedSwCapEntry 2 } ::= { tedSwCapEntry 2 }
skipping to change at page 20, line 4 skipping to change at page 19, line 49
"This object indicates the maximum bandwidth of the TE link at "This object indicates the maximum bandwidth of the TE link at
the priority 0 for GMPLS LSP creation." the priority 0 for GMPLS LSP creation."
REFERENCE REFERENCE
" OSPF Extensions in Support of GMPLS, RFC 4203, 1.4" " OSPF Extensions in Support of GMPLS, RFC 4203, 1.4"
::= { tedSwCapEntry 4 } ::= { tedSwCapEntry 4 }
tedSwCapMaxLspBandwidthPri1 OBJECT-TYPE tedSwCapMaxLspBandwidthPri1 OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295) SYNTAX Unsigned32 (0..4294967295)
UNITS "Byte per seconds" UNITS "Byte per seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
draft-ietf-ccamp-gmpls-ted-mib-07.txt Aug. 2010
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the maximum bandwidth of the TE link at "This object indicates the maximum bandwidth of the TE link at
the priority 1 for GMPLS LSP creation." the priority 1 for GMPLS LSP creation."
REFERENCE REFERENCE
" OSPF Extensions in Support of GMPLS, RFC 4203, 1.4" " OSPF Extensions in Support of GMPLS, RFC 4203, 1.4"
::= { tedSwCapEntry 5 } ::= { tedSwCapEntry 5 }
tedSwCapMaxLspBandwidthPri2 OBJECT-TYPE tedSwCapMaxLspBandwidthPri2 OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295) SYNTAX Unsigned32 (0..4294967295)
skipping to change at page 21, line 4 skipping to change at page 20, line 49
tedSwCapMaxLspBandwidthPri5 OBJECT-TYPE tedSwCapMaxLspBandwidthPri5 OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295) SYNTAX Unsigned32 (0..4294967295)
UNITS "Byte per seconds" UNITS "Byte per seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the maximum bandwidth of the TE link at "This object indicates the maximum bandwidth of the TE link at
the priority 5 for GMPLS LSP creation." the priority 5 for GMPLS LSP creation."
REFERENCE REFERENCE
" OSPF Extensions in Support of GMPLS, RFC 4203, 1.4" " OSPF Extensions in Support of GMPLS, RFC 4203, 1.4"
draft-ietf-ccamp-gmpls-ted-mib-07.txt Aug. 2010
::= { tedSwCapEntry 9 } ::= { tedSwCapEntry 9 }
tedSwCapMaxLspBandwidthPri6 OBJECT-TYPE tedSwCapMaxLspBandwidthPri6 OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295) SYNTAX Unsigned32 (0..4294967295)
UNITS "Byte per seconds" UNITS "Byte per seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the maximum bandwidth of the TE link at "This object indicates the maximum bandwidth of the TE link at
the priority 6 for GMPLS LSP creation." the priority 6 for GMPLS LSP creation."
skipping to change at page 22, line 4 skipping to change at page 21, line 50
"This object indicates the MTU of the local or remote TE link." "This object indicates the MTU of the local or remote TE link."
REFERENCE REFERENCE
" OSPF Extensions in Support of GMPLS, RFC 4203, 1.4" " OSPF Extensions in Support of GMPLS, RFC 4203, 1.4"
::= { tedSwCapEntry 13 } ::= { tedSwCapEntry 13 }
tedSwCapIndication OBJECT-TYPE tedSwCapIndication OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
standard (0), standard (0),
arbitrary (1) arbitrary (1)
} }
draft-ietf-ccamp-gmpls-ted-mib-07.txt Aug. 2010
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates whether the interface supports Standard "This object indicates whether the interface supports Standard
or Arbitrary SONET SDH." or Arbitrary SONET SDH."
REFERENCE REFERENCE
" OSPF Extensions in Support of GMPLS, RFC 4203, 1.4" " OSPF Extensions in Support of GMPLS, RFC 4203, 1.4"
::= { tedSwCapEntry 14 } ::= { tedSwCapEntry 14 }
-- --
-- TED SRLG Table -- TED SRLG Table
-- --
tedSrlgTable OBJECT-TYPE tedSrlgTable OBJECT-TYPE
SYNTAX SEQUENCE OF TedSrlgEntry SYNTAX SEQUENCE OF TedSrlgEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table contains the SRLG information of the TE link." "This table contains the SRLG information of the TE link."
skipping to change at page 22, line 26 skipping to change at page 22, line 14
-- --
-- TED SRLG Table -- TED SRLG Table
-- --
tedSrlgTable OBJECT-TYPE tedSrlgTable OBJECT-TYPE
SYNTAX SEQUENCE OF TedSrlgEntry SYNTAX SEQUENCE OF TedSrlgEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table contains the SRLG information of the TE link." "This table contains the SRLG information of the TE link."
::= { tedObjects 8 } ::= { tedObjects 5 }
tedSrlgEntry OBJECT-TYPE tedSrlgEntry OBJECT-TYPE
SYNTAX TedSrlgEntry SYNTAX TedSrlgEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This entry relates each TE link with its SRLG information." "This entry relates each TE link with its SRLG information."
INDEX { tedAreaId, tedRouterId, tedLinkStateId, tedSrlgIndex } INDEX { tedAreaId, tedRouterId, tedLinkStateId, tedSrlgIndex }
::= { tedSrlgTable 1 } ::= { tedSrlgTable 1 }
skipping to change at page 23, line 5 skipping to change at page 22, line 50
SYNTAX Integer32 SYNTAX Integer32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicate the SRLG value assigned to a local or "This object indicate the SRLG value assigned to a local or
remote TE link" remote TE link"
REFERENCE REFERENCE
" OSPF Extensions in Support of GMPLS, RFC 4203, 1.3" " OSPF Extensions in Support of GMPLS, RFC 4203, 1.3"
::= { tedSrlgEntry 2 } ::= { tedSrlgEntry 2 }
draft-ietf-ccamp-gmpls-ted-mib-07.txt Aug. 2010
-- --
--NotificationObjectTable -- Notification Configuration
-- --
tedNotificationObjectEntry OBJECT IDENTIFIER tedStatusChangeNotificationMaxRate OBJECT-TYPE
::= { tedObjects 9 } SYNTAX Unsigned32
MAX-ACCESS read-write
tedNotificationAreaId OBJECT-TYPE STATUS current
SYNTAX AreaID DESCRIPTION
MAX-ACCESS accessible-for-notify "A lot of notifications relating to the status change are
STATUS current expected to generate in a node, especially when a network failure
DESCRIPTION occurs and might cause a performance degradation of the node itself.
"The area identifier of the IGP for notification." To avoid such a defect, this object provides the maximum number of
::= { tedNotificationObjectEntry 1 } notifications generated per minute. If events occur more rapidly,
the implementation may simply fail to emit these notifications during
tedNotificationRouterId OBJECT-TYPE that period, or may queue them until an appropriate time. A value of
SYNTAX RouterID 0 means no throttling is applied and events may be notified at the
MAX-ACCESS accessible-for-notify rate at which they occur."
STATUS current DEFVAL {0}
DESCRIPTION ::= { tedObjects 6 }
"The router identifier for notification"
::= { tedNotificationObjectEntry 2 }
tedNotificationLinkStateId OBJECT-TYPE tedCreatedDeletedNotificationMaxRate OBJECT-TYPE
SYNTAX LinkStateID SYNTAX Unsigned32
MAX-ACCESS accessible-for-notify MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The link state identifier for notification" "A lot of notifications relating to new registration in ted
::= { tedNotificationObjectEntry 3 } table by receiving new TE link information or deletion of existing
entries in ted table are expected to generate in a node. This object
provides the maximum number of notifications generated per minute. "
DEFVAL {0}
::= { tedObjects 7 }
-- --
-- Notifications -- Notifications
-- --
tedStatusChange NOTIFICATION-TYPE tedStatusChange NOTIFICATION-TYPE
OBJECTS { OBJECTS {
tedNotificationAreaId, tedNotificationRouterId, tedLinkInformationSource
tedNotificationLinkStateId
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This notification signifies that there has been change in TE "This notification signifies that there has been change in TE
information of tedTable, tedLocalIfAddrTable, tedRemoteIfAddrTable, information of tedTable, tedLocalIfAddrTable, tedRemoteIfAddrTable,
tedSwCapTable and tedSrlgTable. For example, this should be generated tedSwCapTable and/or tedSrlgTable. For example, this should be
when tedUnreservedBandwidth is changed to create or delete LSP using generated when tedUnreservedBandwidth is changed to create or delete
registered TE link. " LSP using registered TE link. "
::= { tedNotifications 1 } ::= { tedNotifications 1 }
tedCreation NOTIFICATION-TYPE tedEntryCreated NOTIFICATION-TYPE
OBJECTS { OBJECTS {
tedNotificationAreaId, tedNotificationRouterId, tedLinkInformationSource
tedNotificationLinkStateId
draft-ietf-ccamp-gmpls-ted-mib-07.txt Aug. 2010
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This notification signifies that there has been new " This notification signifies that there has been new
registration in ted table by receiving new TE link information. For registration in ted table by receiving new TE link information. For
example, this should be generated when new index (tedAreaId, example, this should be generated when new index (tedAreaId,
tedRouterId and tedLinkStateId) is registered in TED table." tedRouterId and tedLinkStateId) is registered in TED table."
::= { tedNotifications 2 } ::= { tedNotifications 2 }
tedEntryDeleted NOTIFICATION-TYPE
tedDeletion NOTIFICATION-TYPE
OBJECTS { OBJECTS {
tedNotificationAreaId, tedNotificationRouterId, tedLinkInformationSource
tedNotificationLinkStateId
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This notification signifies that there has been deletion of "This notification signifies that there has been deletion of an
existing entries in ted table. For example, this should be generated entry in the ted table. For example, this should be generated when
when one of existing entries is deleted in TED table." one of existing entries is deleted in TED table."
::= { tedNotifications 3 } ::= { tedNotifications 3 }
-- Conformance Statement -- Conformance Statement
tedCompliances tedCompliances
OBJECT IDENTIFIER ::= { tedConformance 1 } OBJECT IDENTIFIER ::= { tedConformance 1 }
tedGroups tedGroups
OBJECT IDENTIFIER ::= { tedConformance 2 } OBJECT IDENTIFIER ::= { tedConformance 2 }
-- Module Compliance -- Module Compliance
tedModuleFullCompliance MODULE-COMPLIANCE tedModuleFullCompliance MODULE-COMPLIANCE
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Compliance statement for agents provides full support for the "Compliance statement for agents provides full support for the
TED MIB." TED MIB."
MODULE -- this module MODULE -- this module
MANDATORY-GROUPS { tedMainGroup, MANDATORY-GROUPS { tedMainGroup,
tedObjectsGroup, tedObjectsGroup,
tedNotificationObjectGroup,
tedNotificationGroup tedNotificationGroup
} }
GROUP tedUnnumberedLinkGroup GROUP tedUnnumberedLinkGroup
DESCRIPTION DESCRIPTION
"This group is mandatory for TE links that supports the "This group is mandatory for TE links that supports the
unnumbered links." unnumbered links."
GROUP tedNumberedLinkGroup GROUP tedNumberedLinkGroup
DESCRIPTION DESCRIPTION
"This group is mandatory for TE links that supports the numbered "This group is mandatory for TE links that supports the numbered
links." links."
GROUP tedSwCapGroup GROUP tedSwCapGroup
DESCRIPTION DESCRIPTION
draft-ietf-ccamp-gmpls-ted-mib-07.txt Aug. 2010
"This group is mandatory for TE links that supports GMPLS "This group is mandatory for TE links that supports GMPLS
switching capability." switching capability."
GROUP tedSwCapMinLspBandwidthGroup GROUP tedSwCapMinLspBandwidthGroup
DESCRIPTION DESCRIPTION
"This group is mandatory for TE links if the switching "This group is mandatory for TE links if the switching
capability field is TDM, PSC-1, PSC-2, PSC-3, or PSC-4." capability field is TDM, PSC-1, PSC-2, PSC-3, or PSC-4."
GROUP tedSwCapIfMtuGroup GROUP tedSwCapIfMtuGroup
DESCRIPTION DESCRIPTION
skipping to change at page 26, line 5 skipping to change at page 25, line 48
GROUP tedNumberedLinkGroup GROUP tedNumberedLinkGroup
DESCRIPTION DESCRIPTION
"This group is mandatory for TE links that supports the numbered "This group is mandatory for TE links that supports the numbered
links." links."
GROUP tedSwCapGroup GROUP tedSwCapGroup
DESCRIPTION DESCRIPTION
"This group is mandatory for TE links that supports some GMPLS "This group is mandatory for TE links that supports some GMPLS
switching capabilities." switching capabilities."
draft-ietf-ccamp-gmpls-ted-mib-07.txt Aug. 2010
GROUP tedSwCapMinLspBandwidthGroup GROUP tedSwCapMinLspBandwidthGroup
DESCRIPTION DESCRIPTION
"This group is mandatory for TE links if the switching "This group is mandatory for TE links if the switching
capability field is TDM, PSC-1, PSC-2, PSC-3, or PSC-4." capability field is TDM, PSC-1, PSC-2, PSC-3, or PSC-4."
GROUP tedSwCapIfMtuGroup GROUP tedSwCapIfMtuGroup
DESCRIPTION DESCRIPTION
"This group is mandatory for TE links that supports the MTU of "This group is mandatory for TE links that supports the MTU of
the local or remote TE link." the local or remote TE link."
GROUP tedSwCapIndicationGroup GROUP tedSwCapIndicationGroup
DESCRIPTION DESCRIPTION
"This group is mandatory for TE links that supports Standard or "This group is mandatory for TE links that supports Standard or
Arbitrary SONET/SDH." Arbitrary SONET/SDH."
GROUP tedSrlgGroup GROUP tedSrlgGroup
DESCRIPTION DESCRIPTION
"This group is mandatory for TE links that supports SRLG "This group is mandatory for TE links that supports SRLG
information." information."
skipping to change at page 26, line 34 skipping to change at page 26, line 21
"This group is mandatory for TE links that supports SRLG "This group is mandatory for TE links that supports SRLG
information." information."
::= { tedCompliances 2 } ::= { tedCompliances 2 }
-- Units of conformance -- Units of conformance
tedMainGroup OBJECT-GROUP tedMainGroup OBJECT-GROUP
OBJECTS { OBJECTS {
tedLinkInformationSource , tedLinkInformationSource ,
tedLinkState ,
tedLinkType , tedLinkType ,
tedRouterIdAddrType , tedRouterIdAddrType ,
tedRouterIdAddr , tedRouterIdAddr ,
tedLinkIdAddrType , tedLinkIdAddrType ,
tedLinkIdAddr , tedLinkIdAddr ,
tedMetric , tedMetric ,
tedMaxBandwidth , tedMaxBandwidth ,
tedMaxReservableBandwidth , tedMaxReservableBandwidth ,
tedUnreservedBandwidthPri0 , tedUnreservedBandwidthPri0 ,
tedUnreservedBandwidthPri1 , tedUnreservedBandwidthPri1 ,
skipping to change at page 27, line 4 skipping to change at page 26, line 49
tedLinkProtectionType , tedLinkProtectionType ,
tedLinkInformationData tedLinkInformationData
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Collection of objects for TED management" "Collection of objects for TED management"
::= { tedGroups 1 } ::= { tedGroups 1 }
tedObjectsGroup OBJECT-GROUP tedObjectsGroup OBJECT-GROUP
OBJECTS { OBJECTS {
tedStatusChangeNotificationMaxRate,
draft-ietf-ccamp-gmpls-ted-mib-07.txt Aug. 2010 tedCreatedDeletedNotificationMaxRate
tedInfoStatus,
tedCreateDeleteNotificationMaxRate,
tedStatusChangeNotificationMaxRate
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This objects needed to implement notification." "This objects needed to implement notification."
::= { tedGroups 2 } ::= { tedGroups 2 }
tedNotificationObjectGroup OBJECT-GROUP
OBJECTS {
tedNotificationAreaId,
tedNotificationRouterId,
tedNotificationLinkStateId
}
STATUS current
DESCRIPTION
"These objects used to record notification parameter"
::= { tedGroups 3 }
tedNotificationGroup NOTIFICATION-GROUP tedNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS { NOTIFICATIONS {
tedStatusChange, tedStatusChange,
tedCreation, tedEntryCreated,
tedDeletion tedEntryDeleted
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This group is mandatory for those implementations that can " This group is mandatory for those implementations that can
implement the notifications contained in this group. " implement the notifications contained in this group. "
::= { tedGroups 4 } ::= { tedGroups 3 }
tedUnnumberedLinkGroup OBJECT-GROUP tedUnnumberedLinkGroup OBJECT-GROUP
OBJECTS { OBJECTS {
tedLocalId, tedLocalId,
tedRemoteId tedRemoteId
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This objects needed to implement the unnumbered links." "This objects needed to implement the unnumbered links."
::= { tedGroups 5 } ::= { tedGroups 4 }
tedNumberedLinkGroup OBJECT-GROUP tedNumberedLinkGroup OBJECT-GROUP
OBJECTS { OBJECTS {
tedLocalIfAddrType, tedLocalIfAddrType,
tedLocalIfAddr, tedLocalIfAddr,
tedRemoteIfAddrType, tedRemoteIfAddrType,
tedRemoteIfAddr tedRemoteIfAddr
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This objects needed to implement the numbered links." "This objects needed to implement the numbered links."
::= { tedGroups 6 } ::= { tedGroups 5 }
draft-ietf-ccamp-gmpls-ted-mib-07.txt Aug. 2010
tedSwCapGroup OBJECT-GROUP tedSwCapGroup OBJECT-GROUP
OBJECTS { OBJECTS {
tedSwCapSwitchingType, tedSwCapType,
tedSwCapEncoding, tedSwCapEncoding,
tedSwCapMaxLspBandwidthPri0, tedSwCapMaxLspBandwidthPri0,
tedSwCapMaxLspBandwidthPri1, tedSwCapMaxLspBandwidthPri1,
tedSwCapMaxLspBandwidthPri2, tedSwCapMaxLspBandwidthPri2,
tedSwCapMaxLspBandwidthPri3, tedSwCapMaxLspBandwidthPri3,
tedSwCapMaxLspBandwidthPri4, tedSwCapMaxLspBandwidthPri4,
tedSwCapMaxLspBandwidthPri5, tedSwCapMaxLspBandwidthPri5,
tedSwCapMaxLspBandwidthPri6, tedSwCapMaxLspBandwidthPri6,
tedSwCapMaxLspBandwidthPri7 tedSwCapMaxLspBandwidthPri7
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This objects needed to implement TE links with its GMPLS TE "This objects needed to implement TE links with its GMPLS TE
switching capability information." switching capability information."
::= { tedGroups 7 } ::= { tedGroups 6 }
tedSwCapMinLspBandwidthGroup OBJECT-GROUP tedSwCapMinLspBandwidthGroup OBJECT-GROUP
OBJECTS { OBJECTS {
tedSwCapMinLspBandwidth tedSwCapMinLspBandwidth
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This objects needed to implement the minimum bandwidth of the "This objects needed to implement the minimum bandwidth of the
TE link for GMPLS LSP creation." TE link for GMPLS LSP creation."
::= { tedGroups 8 } ::= { tedGroups 7 }
tedSwCapIfMtuGroup OBJECT-GROUP tedSwCapIfMtuGroup OBJECT-GROUP
OBJECTS { OBJECTS {
tedSwCapIfMtu tedSwCapIfMtu
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This objects needed to implement the MTU information of the "This objects needed to implement the MTU information of the
local or remote TE link." local or remote TE link."
::= { tedGroups 9 } ::= { tedGroups 8 }
tedSwCapIndicationGroup OBJECT-GROUP tedSwCapIndicationGroup OBJECT-GROUP
OBJECTS { OBJECTS {
tedSwCapIndication tedSwCapIndication
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This objects needed to implement the indication whether the "This objects needed to implement the indication whether the
interface supports Standard or Arbitrary SONET/SDH." interface supports Standard or Arbitrary SONET/SDH."
::= { tedGroups 10 } ::= { tedGroups 9 }
tedSrlgGroup OBJECT-GROUP tedSrlgGroup OBJECT-GROUP
OBJECTS { OBJECTS {
tedSrlg tedSrlg
} }
STATUS current STATUS current
draft-ietf-ccamp-gmpls-ted-mib-07.txt Aug. 2010
DESCRIPTION DESCRIPTION
"This objects needed to implement multiple SRLG values with "This objects needed to implement multiple SRLG values with
GMPLS TE information." GMPLS TE information."
::= { tedGroups 11 } ::= { tedGroups 10 }
END END
8. Security Consideration 8. Security Consideration
There is a number of management objects defined in this MIB module There is a number of management objects defined in this MIB module
that has a MAX-ACCESS clause of read-write.. Such objects may be that has a MAX-ACCESS clause of read-write. Such objects may be
considered sensitive or vulnerable in some network environments. The considered sensitive or vulnerable in some network environments. The
support for SET operations in a non-secure environment without proper support for SET operations in a non-secure environment without proper
protection can have a negative effect on network operations. protection can have a negative effect on network operations.
Some of the readable objects in this MIB module (i.e., objects with a Some of the readable objects in this MIB module (i.e., objects with a
MAX-ACCESS other than not-accessible) may be considered sensitive or MAX-ACCESS other than not-accessible) may be considered sensitive or
vulnerable in some network environments. It is thus important to vulnerable in some network environments. It is thus important to
control even GET and/or NOTIFY access to these objects and possibly control even GET and/or NOTIFY access to these objects and possibly
to even encrypt the values of these objects when sending them over to even encrypt the values of these objects when sending them over
the network via SNMP. These are the tables and objects and their the network via SNMP. These are the tables and objects and their
skipping to change at page 30, line 5 skipping to change at page 29, line 34
Further, deployment of SNMP versions prior to SNMPv3 is NOT Further, deployment of SNMP versions prior to SNMPv3 is NOT
RECOMMENDED. Instead, it is RECOMMENDED to deploy SNMPv3 and to RECOMMENDED. Instead, it is RECOMMENDED to deploy SNMPv3 and to
enable cryptographic security. It is then a customer/operator enable cryptographic security. It is then a customer/operator
responsibility to ensure that the SNMP entity giving access to an responsibility to ensure that the SNMP entity giving access to an
instance of this MIB module is properly configured to give access to instance of this MIB module is properly configured to give access to
the objects only to those principles (users) that have legitimate the objects only to those principles (users) that have legitimate
rights to indeed GET or SET (change/create/delete) them. rights to indeed GET or SET (change/create/delete) them.
9. IANA Considerations 9. IANA Considerations
draft-ietf-ccamp-gmpls-ted-mib-07.txt Aug. 2010
The following "IANA Considerations" subsection requests IANA for a The following "IANA Considerations" subsection requests IANA for a
new assignment under the transmission subtree. New assignments can new assignment under the transmission subtree. New assignments can
only be made via a Standards Action as specified in [RFC5226]. only be made via a Standards Action as specified in [RFC5226].
9.1 IANA Considerations for TED-MIB 9.1 IANA Considerations for TED-MIB
The IANA is requested to assign { transmission XXX } to the TED-MIB The IANA is requested to assign {transmission XXX } to the TED-MIB
module specified in this document. module specified in this document.
10. References 10. References
10.1 Normative References 10.1 Normative References
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119, March 1997. Requirement Levels", BCP 14, RFC 2119, March 1997.
[RFC2328] J. Moy, " OSPF version2 ", RFC2328, April 1998.
[RFC2578] McCloghrie, K., Perkins, D., and J. Schoenwaelder, [RFC2578] McCloghrie, K., Perkins, D., and J. Schoenwaelder,
"Structure of Management Information Version 2 (SMIv2)", "Structure of Management Information Version 2 (SMIv2)",
STD 58, RFC 2578, April 1999. STD 58, RFC 2578, April 1999.
[RFC2579] McCloghrie, K., Perkins, D., and J. Schoenwaelder, [RFC2579] McCloghrie, K., Perkins, D., and J. Schoenwaelder,
"Textual Conventions for SMIv2", STD 58, RFC 2579, April "Textual Conventions for SMIv2", STD 58, RFC 2579, April
1999. 1999.
[RFC2580] McCloghrie, K., Perkins, D., and J. Schoenwaelder, [RFC2580] McCloghrie, K., Perkins, D., and J. Schoenwaelder,
"Conformance Statements for SMIv2", STD 58, RFC 2580, "Conformance Statements for SMIv2", STD 58, RFC 2580,
April 1999. April 1999.
[RFC3291] M. Daniele, B. Haberman, S. Routhier, J. Schoenwaelder,
"Textual Conventions for Internet Network Addresses",
RFC3291, May 2002.
[RFC3630] D. Katz, et al, "Traffic Engineering (TE) Extensions to
OSPF Version2", RFC3630, Sep. 2003.
[RFC4203] K. Kompella, and Y. Rekhter, "OSPF Extensions in Support
of Generalized Multi-Protocol Label Switching", RFC4203,
Oct. 2005.
[RFC4750] Dan Joyal, et al, "OSPF Version 2 Management Information
Base", RFC4750, Dec. 2006.
[RFC4801] T. Nadeau and A. Farrel, Ed., "Definitions of Textual [RFC4801] T. Nadeau and A. Farrel, Ed., "Definitions of Textual
Conventions for Generalized Multiprotocol Label Switching Conventions for Generalized Multiprotocol Label Switching
(GMPLS) Management", RFC4801, Feb. 2007. (GMPLS) Management", RFC4801, Feb. 2007.
10.2 Informative References [RFC5329] K. Ishiguro, V. Manral, A. Davey, A.Lindem " Traffic
Engineering Extensions to OSPF Version 3 ", RFC5329, Sep.
2008.
[RFC4750] Dan Joyal, et al, "OSPF Version 2 Management Information [RFC5340] R. Coltun, D. Ferguson, J. Moy, A.Lindem " OSPF for IPv6",
Base", RFC4750, December 2006. RFC5340, July 2008.
[RFC5643] Dan Joyal, et al, "Management Information Base for OSPFv3 [RFC5643] Dan Joyal, et al, "Management Information Base for OSPFv3
", RFC5643, August 2009. ", RFC5643, August 2009.
[RFC4444] J. Parker, et al, "Management Information Base for 10.2 Informative References
Intermediate System to Intermediate System (IS-IS)", RFC
4444, April 2006.
[RFC4202] K. Kompella, and Y. Rekhter, "Routing Extensions in
Support of Generalized Multi-Protocol Label Switching",
RFC4202, Oct. 2005.
[RFC3630] D. Katz, et al, "Traffic Engineering (TE) Extensions to
OSPF Version2", RFC3630, September 2003.
[RFC4205] K. Kompella, and Y. Rekhter, "Intermediate System to
Intermediate System (IS-IS) Extensions in Support of
draft-ietf-ccamp-gmpls-ted-mib-07.txt Aug. 2010
Multi-Protocol Label Switching (GMPLS)", RFC4205, Oct.
2005.
[RFC3784] H. Smit and T. Li, "IS-IS extensions for Traffic [RFC3410] J. Case, R. Mundy, D. pertain, B.Stewart, "Introduction
Engineering", RFC 3784, June 2004. and Applicability Statement for Internet Standard
Management Framework", RFC 3410, Dec. 2002.
[RFC3812] Srinivasan, C., Viswanathan, A., and T. Nadeau, [RFC3812] Srinivasan, C., Viswanathan, A., and T. Nadeau,
"Multiprotocol Label Switching (MPLS) Traffic Engineering "Multiprotocol Label Switching (MPLS) Traffic Engineering
(TE) Management Information Base (MIB)", RFC 3812, June (TE) Management Information Base (MIB)", RFC 3812, June
2004. 2004.
[RFC3813] Srinivasan, C., Viswanathan, A., and T. Nadeau, [RFC3813] Srinivasan, C., Viswanathan, A., and T. Nadeau,
"Multiprotocol Label Switching (MPLS) Label Switching "Multiprotocol Label Switching (MPLS) Label Switching
(LSR) Router Management Information Base (MIB)", RFC 3813, (LSR) Router Management Information Base (MIB)", RFC 3813,
June 2004. June 2004.
[RFC4202] K. Kompella, and Y. Rekhter, "Routing Extensions in
Support of Generalized Multi-Protocol Label Switching",
RFC4202, Oct. 2005.
[RFC4220] M. Dubuc, T. D. Nadeu and J. Lang, " Traffic Engineering
Link Management Information Base ", RFC4220, Dec. 2005.
[RFC4444] J. Parker, et al, "Management Information Base for
Intermediate System to Intermediate System (IS-IS)", RFC
4444, April 2006.
[RFC4802] T. D. Nadeu and A. Farrel, "Generalized Multiprotocol [RFC4802] T. D. Nadeu and A. Farrel, "Generalized Multiprotocol
Label Switching (GMPLS) Traffic Engineering Management Label Switching (GMPLS) Traffic Engineering Management
Information Base", RFC4802, Feb., 2007. Information Base", RFC4802, Feb. 2007.
[RFC4803] T. D. Nadeu and A. Farrel, "Generalized Multiprotocol [RFC4803] T. D. Nadeu and A. Farrel, "Generalized Multiprotocol
Label Switching (GMPLS) Label Switching Router (LSR) Label Switching (GMPLS) Label Switching Router (LSR)
Management Information Base", RFC4803, Feb., 2007. Management Information Base", RFC4803, Feb., 2007.
[RFC4203] K. Kompella, and Y. Rekhter, "OSPF Extensions in Support [RFC5305] H. Smit and T. Li, "IS-IS extensions for Traffic
of Generalized Multi-Protocol Label Switching", RFC4203, Engineering", RFC 5305, Oct. 2008.
Oct. 2005.
[RFC3630] Katz, D., et al, "Traffic Engineering (TE) Extensions to [RFC5307] K. Kompella, and Y. Rekhter, "IS-IS Extensions in Support
OSPF Version 2", RFC3630, September 2003. of Generalized Multi-Protocol Label Switching (GMPLS)",
RFC5307, Oct. 2008.
[RFC5226] Narten, T. and H. Alvestrand., " Guidelines for Writing an [RFC5226] Narten, T. and H. Alvestrand., " Guidelines for Writing an
IANA Considerations Section in RFCs" BCP 26, RFC 5226, May IANA Considerations Section in RFCs" BCP 26, RFC 5226, May
2008. 2008.
[RFC3410] J. Case, R. Mundy, D. pertain, B.Stewart, "Introduction [RFC5643] Dan Joyal, et al, "Management Information Base for OSPFv3
and Applicability Statement for Internet Standard ", RFC5643, August 2009.
Management Framework", RFC 3410, December 2002.
[RFC4220] M. Dubuc, T. D. Nadeu and J. Lang, " Traffic Engineering
Link Management Information Base ", RFC4220, December 2005.
[RFC2328] J. Moy, " OSPF version2 ", RFC2328, April 1998.
[RFC5340] R. Coltun, D. Ferguson, J. Moy, A.Lindem " OSPF for IPv6",
RFC5340, July 2008.
[RFC5329] K. Ishiguro, V. Manral, A. Davey, A.Lindem " Traffic
Engineering Extensions to OSPF Version 3 ", RFC5329,
September 2008.
11. Acknowledgment 11. Acknowledgment
draft-ietf-ccamp-gmpls-ted-mib-07.txt Aug. 2010
The authors wish to acknowledge and thank the following individuals The authors wish to acknowledge and thank the following individuals
for their valuable comments to this document: Ken Nagami, Shuichi for their valuable comments to this document: Ken Nagami, Shuichi
Okamoto, Adrian Farrel and Diego Caviglia. Okamoto, Adrian Farrel and Diego Caviglia.
12. Authors' Addresses 12. Authors' Addresses
Tomohiro Otani Tomohiro Otani
KDDI Corporation KDDI Corporation
KDDI Bldg, KDDI Bldg,
2-3-2, Nishishinjuku, Shinjuku-ku, Tokyo, 2-3-2, Nishishinjuku, Shinjuku-ku, Tokyo,
163-8003, Japan 163-8003, Japan
Email: tm-otani@kddi.com Email: tm-otani@kddi.com
Masanori Miyazawa Masanori Miyazawa
KDDI R&D Laboratories, Inc. KDDI R&D Laboratories, Inc.
2-1-15 Ohara Fujimino, Saitama, 2-1-15 Ohara Fujimino, Saitama,
356-8502, Japan. 356-8502, Japan.
Phone: +81-49-278-7559
Email: ma-miyazawa@kddilabs.jp Email: ma-miyazawa@kddilabs.jp
Thomas D. Nadeau Thomas D. Nadeau
BT Email: tnadeau@lucidvision.com
Email: tom.nadeau@bt.com
Kenji Kumaki Kenji Kumaki
KDDI Corporation KDDI Corporation
Garden Air Tower Garden Air Tower
Iidabashi, Chyoda-ku, Tokyo, Iidabashi, Chyoda-ku, Tokyo,
102-8460, Japan 102-8460, Japan
Email: ke-kumaki@kddi.com Email: ke-kumaki@kddi.com
 End of changes. 140 change blocks. 
348 lines changed or deleted 219 lines changed or added

This html diff was produced by rfcdiff 1.41. The latest version is available from http://tools.ietf.org/tools/rfcdiff/