draft-ietf-ccamp-gmpls-ted-mib-10.txt   draft-ietf-ccamp-gmpls-ted-mib-11.txt 
INTERNET-DRAFT Masanori Miyazawa INTERNET-DRAFT Masanori Miyazawa
Intended status: Standards Truck KDDI R&D Labs Intended status: Standards Truck KDDI R&D Labs
Expires: June 12, 2012 Expires: August 12, 2012
Tomohiro Otani Tomohiro Otani
Kenji Kumaki Kenji Kumaki
KDDI Corporation KDDI Corporation
Thomas D. Nadeau Thomas D. Nadeau
January 12, 2012 March 12, 2012
Traffic Engineering Database Management Information Base in support of Traffic Engineering Database Management Information Base in support of
MPLS-TE/GMPLS MPLS-TE/GMPLS
draft-ietf-ccamp-gmpls-ted-mib-10.txt draft-ietf-ccamp-gmpls-ted-mib-11.txt
Status of this Memo Status of this Memo
This Internet-Draft is submitted to IETF in full conformance with This Internet-Draft is submitted to IETF in full conformance with
the provisions of BCP 78 and BCP 79. the provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF), its areas, and its working groups. Note that other Task Force (IETF), its areas, and its working groups. Note that other
groups may also distribute working documents as Internet-Drafts. groups may also distribute working documents as Internet-Drafts.
skipping to change at page 3, line 47 skipping to change at page 3, line 47
This MIB module should be used in conjunction with OSPFv2 MIB, OSPF This MIB module should be used in conjunction with OSPFv2 MIB, OSPF
v3 MIB and ISIS MIB as well as other MIBs defined in [RFC3812], v3 MIB and ISIS MIB as well as other MIBs defined in [RFC3812],
[RFC3813], [RFC4802], [RFC4803] for the management of MPLS/GMPLS [RFC3813], [RFC4802], [RFC4803] for the management of MPLS/GMPLS
based traffic engineering information. based traffic engineering information.
3. Overview 3. Overview
3.1 Conventions used in this document 3.1 Conventions used in this document
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
document are to be interpreted as described in RFC-2119 [RFC2119]. "OPTIONAL" in this document are to be interpreted as described in
RFC-2119 [RFC2119].
3.2 Terminology 3.2 Terminology
Definitions of key terms for MPLS OAM and GMPLS are found in Definitions of key terms for MPLS OAM and GMPLS are found in
[RFC4377] and [RFC3945], and the reader is assumed to be familiar [RFC4377] and [RFC3945], and the reader is assumed to be familiar
with those definitions which are not repeated here. with those definitions which are not repeated here.
3.3 Acronyms 3.3 Acronyms
FSC: Fiber switch capable FSC: Fiber switch capable
skipping to change at page 5, line 37 skipping to change at page 5, line 37
tedSrlgTable are not supported. tedSrlgTable are not supported.
Note that the TED MIB modules are only limited to "read-only" access Note that the TED MIB modules are only limited to "read-only" access
except for tedCreatedDeletedNotificationMaxRate and except for tedCreatedDeletedNotificationMaxRate and
tedStatusChangeNotificationMaxRate. The TED MIB is designed to be tedStatusChangeNotificationMaxRate. The TED MIB is designed to be
independent of OSPF or ISIS MIBs, however each TE link information independent of OSPF or ISIS MIBs, however each TE link information
belongs to a node or a link which is managed by the routing protocol. belongs to a node or a link which is managed by the routing protocol.
In tedTable: In tedTable:
{ {
tedAreaId.0.3221225985.16777264 0 tedLinkInformationData.2.3232235777.3232235778.16777264 zeroDotZero
tedRouterId.0.3221225985.16777264 1848783410 tedLinkType.2.3232235777.3232235778.16777264 pointToPoint(1)
tedLinkStateId.0.3221225985.16777264 805306369 tedLinkState.2.3232235777.3232235778.16777264 up(1)
tedLinkInformationSource.0.3221225985.16777264 ospf(2) tedAreaId.2.3232235777.3232235778.16777264 0
tedLinkInformationData.0.3221225985.16777264 zeroDotZero tedRouterIdAddrType.2.3232235777.3232235778.16777264 ipv4(1)
tedLinkType.0.3221225985.16777264 pointToPoint(1) tedRouterIdAddr.2.3232235777.3232235778.16777264 192.0.2.1
tedLinkState.0.3221225985.16777264 up(1) tedLinkIdAddrType.2.3232235777.3232235778.16777264 ipv4(1)
tedRouterIdAddrType.0.3221225985.16777264 ipv4(1) tedLinkIdAddr.2.3232235777.3232235778.16777264 192.0.2.10
tedRouterIdAddr.0.3221225985.16777264192.0.2.1 tedMetric.2.3232235777.3232235778.16777264 1
tedLinkIdAddrType.0.3221225985.16777264 ipv4(1) tedMaxBandwidth.2.3232235777.3232235778.16777264 1376193201
tedLinkIdAddr.0.3221225985.16777264 192.0.2.10 tedMaxReservableBandwidth.2.3232235777.3232235778.16777264 1376193201
tedMetric.0.3221225985.16777264 1 tedUnreservedBandwidthPri0.2.3232235777.3232235778.16777264
tedMaxBandwidth.0.3221225985.167772641376193201 1375888025
tedMaxReservableBandwidth.0.3221225985.16777264 1376193201 tedUnreservedBandwidthPri1.2.3232235777.3232235778.16777264
tedUnreservedBandwidthPri0.0.3221225985.16777264 1375888025 1375888025
tedUnreservedBandwidthPri1.0.3221225985.16777264 1375888025 tedUnreservedBandwidthPri2.2.3232235777.3232235778.16777264
tedUnreservedBandwidthPri2.0.3221225985.16777264 1375888025 1375888025
tedUnreservedBandwidthPri3.0.3221225985.16777264 1375888025 tedUnreservedBandwidthPri3.2.3232235777.3232235778.16777264
tedUnreservedBandwidthPri4.0.3221225985.16777264 1375888025 1375888025
tedUnreservedBandwidthPri5.0.3221225985.16777264 1375888025 tedUnreservedBandwidthPri4.2.3232235777.3232235778.16777264
tedUnreservedBandwidthPri6.0.3221225985.16777264 1375888025 1375888025
tedUnreservedBandwidthPri7.0.3221225985.16777264 1375888025 tedUnreservedBandwidthPri5.2.3232235777.3232235778.16777264
tedAdministrativeGroup.0.3221225985.16777264 0 1375888025
tedLocalId.0.3221225985.16777264 0 tedUnreservedBandwidthPri6.2.3232235777.3232235778.16777264
tedRemoteId.0.3221225985.16777264 0 1375888025
tedLinkProtectionType.0.3221225985.16777264 01 00 00 00 7 tedUnreservedBandwidthPri7.2.3232235777.3232235778.16777264
1375888025
tedAdministrativeGroup.2.3232235777.3232235778.16777264 0
tedLocalId.2.3232235777.3232235778.16777264 0
tedRemoteId.2.3232235777.3232235778.16777264 0
tedLinkProtectionType.2.3232235777.3232235778.16777264 01 00 00 00 7
In tedLocalIfAddrTable: In tedLocalIfAddrTable:
{ {
tedLocalIfAddrType.0.3221225985.16777264.0 ipv4(1) tedLocalIfAddrType.16777264.192.0.2.21 ipv4(1)
tedLocalIfAddr.0.3221225985.16777264.0 192.0.2.21
} }
In tedRemoteIfAddrTable: In tedRemoteIfAddrTable:
{ {
tedRemoteIfAddrType.0.3221225985.16777264.0 ipv4(1) tedRemoteIfAddrType.16777264.192.0.2.22 ipv4(1)
tedRemoteIfAddr.0.3221225985.16777264.0 192.0.2.22
} }
In tedSwCapTable: In tedSwCapTable:
{ {
tedSwCapType.0.3221225985.16777264.1 lsc(150) tedSwCapType.16777264.1 lsc(150)
tedSwCapEncoding.0.3221225985.16777264.1 ethernet(2) tedSwCapEncoding.16777264.1 ethernet(2)
tedSwCapMaxLspBandwidthPri0.0.3221225985.16777264.1 1375888025 tedSwCapMaxLspBandwidthPri0.16777264.1 1375888025
tedSwCapMaxLspBandwidthPri1.0.3221225985.16777264.1 1375888025 tedSwCapMaxLspBandwidthPri1.16777264.1 1375888025
tedSwCapMaxLspBandwidthPri2.0.3221225985.16777264.1 1375888025 tedSwCapMaxLspBandwidthPri2.16777264.1 1375888025
tedSwCapMaxLspBandwidthPri3.0.3221225985.16777264.1 1375888025 tedSwCapMaxLspBandwidthPri3.16777264.1 1375888025
tedSwCapMaxLspBandwidthPri4.0.3221225985.16777264.1 1375888025 tedSwCapMaxLspBandwidthPri4.16777264.1 1375888025
tedSwCapMaxLspBandwidthPri5.0.3221225985.16777264.1 1375888025 tedSwCapMaxLspBandwidthPri5.16777264.1 1375888025
tedSwCapMaxLspBandwidthPri6.0.3221225985.16777264.1 1375888025 tedSwCapMaxLspBandwidthPri6.16777264.1 1375888025
tedSwCapMaxLspBandwidthPri7.0.3221225985.16777264.1 1375888025 tedSwCapMaxLspBandwidthPri7.16777264.1 1375888025
tedSwCapMinLspBandwidth.0.3221225985.16777264.1 0 tedSwCapMinLspBandwidth.16777264.1 0
tedSwCapIfMtu.0.3221225985.16777264.10 tedSwCapIfMtu.16777264.1 0
tedSwCapIndication.0.3221225985.16777264.1 standard(0) tedSwCapIndication.16777264.1 standard(0)
} }
In tedSrlgTable: In tedSrlgTable:
{ {
tedSrlg.0.3221225985.16777264.0 0 tedSrlg.16777264.1 0
} }
7. TED MIB Definitions in support of GMPLS 7. TED MIB Definitions in support of GMPLS
TED-MIB DEFINITIONS ::= BEGIN TED-MIB DEFINITIONS ::= BEGIN
IMPORTS IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32, transmission, MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32, transmission,
NOTIFICATION-TYPE NOTIFICATION-TYPE
FROM SNMPv2-SMI -- RFC2578 FROM SNMPv2-SMI -- RFC2578
skipping to change at page 6, line 53 skipping to change at page 7, line 4
} }
7. TED MIB Definitions in support of GMPLS 7. TED MIB Definitions in support of GMPLS
TED-MIB DEFINITIONS ::= BEGIN TED-MIB DEFINITIONS ::= BEGIN
IMPORTS IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32, transmission, MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32, transmission,
NOTIFICATION-TYPE NOTIFICATION-TYPE
FROM SNMPv2-SMI -- RFC2578 FROM SNMPv2-SMI -- RFC2578
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF -- RFC2580 FROM SNMPv2-CONF -- RFC2580
TEXTUAL-CONVENTION, RowPointer TEXTUAL-CONVENTION, RowPointer
FROM SNMPv2-TC -- RFC2579 FROM SNMPv2-TC -- RFC2579
IANAGmplsLSPEncodingTypeTC, IANAGmplsSwitchingTypeTC IANAGmplsLSPEncodingTypeTC, IANAGmplsSwitchingTypeTC
FROM IANA-GMPLS-TC-MIB -- RFC4802 FROM IANA-GMPLS-TC-MIB -- RFC4802
InetAddress, InetAddressType InetAddress, InetAddressType
FROM INET-ADDRESS-MIB -- [RFC4001] FROM INET-ADDRESS-MIB -- [RFC4001]
; ;
tedMIB MODULE-IDENTITY tedMIB MODULE-IDENTITY
LAST-UPDATED "201107110000Z" -- 11 July 2011 00:00:00 GMT LAST-UPDATED "201203120000Z" -- 12 March 2012 00:00:00 GMT
ORGANIZATION "IETF CCAMP Working Group." ORGANIZATION "IETF CCAMP Working Group."
CONTACT-INFO CONTACT-INFO
" Tomohiro Otani " Tomohiro Otani
otani@kddilabs.jp otani@kddilabs.jp
Masanori Miyazawa Masanori Miyazawa
ma-miyazawa@kddilabs.jp ma-miyazawa@kddilabs.jp
Thomas D. Nadeau Thomas D. Nadeau
tnadeau@lucidvision.com tnadeau@lucidvision.com
skipping to change at page 7, line 37 skipping to change at page 7, line 41
Comments and discussion to ccamp@ietf.org" Comments and discussion to ccamp@ietf.org"
DESCRIPTION DESCRIPTION
"This MIB contains managed object definitions for TED in "This MIB contains managed object definitions for TED in
support of MPLS/GMPLS TE Database. support of MPLS/GMPLS TE Database.
Copyright (C) 2011 The IETF Trust. This version of this MIB Copyright (C) 2011 The IETF Trust. This version of this MIB
module is part of RFC xxx; see the RFC itself for full legal module is part of RFC xxx; see the RFC itself for full legal
notices." notices."
-- Revision history. -- Revision history.
REVISION REVISION
"201107110000Z" -- 15 July 2011 00:00:00 GMT "201203120000Z" -- 12 March 2012 00:00:00 GMT
DESCRIPTION DESCRIPTION
"Initial version. Published as RFC xxx." "Initial version. Published as RFC xxx."
-- RFC-editor pls fill in yyy -- RFC-editor pls fill in yyy
::= { transmission yyy } ::= { transmission yyy }
-- assigned by IANA, see section 9.1 for details -- assigned by IANA, see section 9.1 for details
-- Textual Conventions. -- Textual Conventions.
TedAreaIdTC ::= TEXTUAL-CONVENTION TedAreaIdTC ::= TEXTUAL-CONVENTION
STATUS current STATUS current
skipping to change at page 8, line 9 skipping to change at page 8, line 11
SYNTAX OCTET STRING (SIZE (0..32)) SYNTAX OCTET STRING (SIZE (0..32))
TedRouterIdTC ::= TEXTUAL-CONVENTION TedRouterIdTC ::= TEXTUAL-CONVENTION
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" The router identifier. If OSPF is used to advertise LSA, " The router identifier. If OSPF is used to advertise LSA,
this represents a Router ID. If ISIS is used, this represents a this represents a Router ID. If ISIS is used, this represents a
System ID." System ID."
SYNTAX OCTET STRING (SIZE (0..32)) SYNTAX OCTET STRING (SIZE (0..32))
TedLinkStateIdTC ::= TEXTUAL-CONVENTION TedLinkIndexTC ::= TEXTUAL-CONVENTION
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" The link state identifier. If OSPF is used, this " The link identifier. If OSPF is used, this represents an
represents an ospfLsdbID. If ISIS is used, this represents an ospfLsdbID. If ISIS is used, this represents an isisLSPID. If a
isisLSPID." locally configured link is used, this object represents an arbitrary
SYNTAX OCTET STRING (SIZE (0..32)) value which is locally defined in a router"
SYNTAX OCTET STRING (SIZE (0..8))
-- Top level components of this MIB. -- Top level components of this MIB.
tedNotifications OBJECT IDENTIFIER ::= { tedMIB 0 } tedNotifications OBJECT IDENTIFIER ::= { tedMIB 0 }
tedObjects OBJECT IDENTIFIER ::= { tedMIB 1 } tedObjects OBJECT IDENTIFIER ::= { tedMIB 1 }
tedConformance OBJECT IDENTIFIER ::= { tedMIB 2 } tedConformance OBJECT IDENTIFIER ::= { tedMIB 2 }
-- --
-- TED Table -- TED Table
skipping to change at page 8, line 44 skipping to change at page 8, line 47
supported by [RFC3630]." supported by [RFC3630]."
::= { tedObjects 1 } ::= { tedObjects 1 }
tedEntry OBJECT-TYPE tedEntry OBJECT-TYPE
SYNTAX TedEntry SYNTAX TedEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This entry contains TED information commonly utilized in both "This entry contains TED information commonly utilized in both
MPLS and GMPLS." MPLS and GMPLS."
INDEX { tedAreaId, tedRouterId, tedLinkStateId } INDEX { tedLinkInformationSource, tedLocalRouterId,
tedRemoteRouterId, tedLinkIndex }
::= { tedTable 1 } ::= { tedTable 1 }
TedEntry ::= SEQUENCE { TedEntry ::= SEQUENCE {
tedAreaId TedAreaIdTC,
tedRouterId TedRouterIdTC,
tedLinkStateId TedLinkStateIdTC,
tedLinkInformationSource INTEGER, tedLinkInformationSource INTEGER,
tedLocalRouterId TedRouterIdTC,
tedRemoteRouterId TedRouterIdTC,
tedLinkIndex TedLinkIndexTC,
tedLinkInformationData RowPointer, tedLinkInformationData RowPointer,
tedLinkState INTEGER, tedLinkState INTEGER,
tedAreaId TedAreaIdTC,
tedLinkType INTEGER, tedLinkType INTEGER,
tedRouterIdAddrType InetAddressType, tedRouterIdAddrType InetAddressType,
tedRouterIdAddr InetAddress, tedRouterIdAddr InetAddress,
tedLinkIdAddrType InetAddressType, tedLinkIdAddrType InetAddressType,
tedLinkIdAddr InetAddress, tedLinkIdAddr InetAddress,
tedMetric Integer32, tedMetric Integer32,
tedMaxBandwidth Unsigned32, tedMaxBandwidth Unsigned32,
tedMaxReservableBandwidth Unsigned32, tedMaxReservableBandwidth Unsigned32,
tedUnreservedBandwidthPri0 Unsigned32, tedUnreservedBandwidthPri0 Unsigned32,
tedUnreservedBandwidthPri1 Unsigned32, tedUnreservedBandwidthPri1 Unsigned32,
skipping to change at page 9, line 22 skipping to change at page 9, line 27
tedUnreservedBandwidthPri4 Unsigned32, tedUnreservedBandwidthPri4 Unsigned32,
tedUnreservedBandwidthPri5 Unsigned32, tedUnreservedBandwidthPri5 Unsigned32,
tedUnreservedBandwidthPri6 Unsigned32, tedUnreservedBandwidthPri6 Unsigned32,
tedUnreservedBandwidthPri7 Unsigned32, tedUnreservedBandwidthPri7 Unsigned32,
tedAdministrativeGroup Integer32, tedAdministrativeGroup Integer32,
tedLocalId Integer32, tedLocalId Integer32,
tedRemoteId Integer32, tedRemoteId Integer32,
tedLinkProtectionType BITS tedLinkProtectionType BITS
} }
tedAreaId OBJECT-TYPE tedLinkInformationSource OBJECT-TYPE
SYNTAX TedAreaIdTC SYNTAX INTEGER {
unknown(0),
locallyConfigured(1),
ospfv2(2),
ospfv3(3),
isis(4),
other(5)
}
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the area identifier of the IGP. If OSPF "This object indicates the source of the information about the
is used to advertise LSA, this represents an ospfArea. If ISIS is TE link."
used, this represents an area address. Otherwise, this represents ::= { tedEntry 1 }
zero."
REFERENCE
" OSPF Version 2, [RFC2328], C.2
OSPF for IPv6, [RFC5340], C.2
Section 9.8 of [ISO10589]"
::= { tedEntry 1 }
tedRouterId OBJECT-TYPE tedLocalRouterId OBJECT-TYPE
SYNTAX TedRouterIdTC SYNTAX TedRouterIdTC
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the router identifier. If OSPF is used "This object represents the router ID of the router originating
to advertise LSA, this represents a Router ID. If ISIS is used, this the LSA. If OSPF is used to advertise LSA, this represents a Router
represents a System ID. Otherwise, this represents zero." ID. If ISIS is used, this represents a System ID. Otherwise, this
represents zero."
REFERENCE REFERENCE
" OSPF Version 2, [RFC2328], C.1 " OSPF Version 2, [RFC2328], C.1
OSPF for IPv6, [RFC5340], C.1 OSPF for IPv6, [RFC5340], C.1
Section 7.1 of [ISO10589]" [ISO10589], Section 7.1 "
::= { tedEntry 2 } ::= { tedEntry 2 }
tedRemoteRouterId OBJECT-TYPE
SYNTAX TedRouterIdTC
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This object indicates the router at the remote end of the link
from the originating router. If OSPF is used to advertise LSA, this
represents a Link ID in the Link TLV. If ISIS is used, this
represents a neighbor system ID defined in [RFC5305]. Otherwise, this
represents zero."
REFERENCE
" OSPF Version 2, [RFC2328], C.1
OSPF for IPv6, [RFC5340], C.1
[ISO10589], Section 7.1
IS-IS extensions for TE [RFC5305], C.3"
::= { tedEntry 3 }
tedLinkStateId OBJECT-TYPE tedLinkIndex OBJECT-TYPE
SYNTAX TedLinkStateIdTC SYNTAX TedLinkIndexTC
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the link state identifier. If OSPF is "This object indicates the link state identifier. If OSPF is
used, this represents an ospfLsdbID. If ISIS is used, this represents used, this represents an ospfLsdbID. If ISIS is used, this represents
an isisLSPID. Otherwise, this represents a unique identifier within a an isisLSPID. Otherwise, this represents a unique identifier within a
node." node."
REFERENCE REFERENCE
"OSPF Version 2, [RFC2328], A.4.1, "OSPF Version 2, [RFC2328], A.4.1,
OSPF for IPv6, [RFC5340], A.4.2 OSPF for IPv6, [RFC5340], A.4.2
Section 9.8 of [ISO10589] " [ISO10589], Section 9.8 "
::= { tedEntry 3 } ::= { tedEntry 4 }
tedLinkInformationSource OBJECT-TYPE
SYNTAX INTEGER {
unknown(0),
locallyConfigured(1),
ospfv2(2),
ospfv3(3),
isis(4),
other(5)
}
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the source of the information about the
TE link."
::= { tedEntry 4 }
tedLinkInformationData OBJECT-TYPE tedLinkInformationData OBJECT-TYPE
SYNTAX RowPointer SYNTAX RowPointer
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object cross-references the source of the information "This object cross-references the source of the information
about this TE link and should be interpretted in the context of about this TE link and should be interpretted in the context of
tedLinkInformationSource. tedLinkInformationSource.
If tedLinkInformationSource has the value unknown(0), this If tedLinkInformationSource has the value unknown(0), this
skipping to change at page 11, line 21 skipping to change at page 11, line 32
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object represents the actual operational state of this " This object represents the actual operational state of this
TE link. For instance, if a row is created in the tedTable, but the TE link. For instance, if a row is created in the tedTable, but the
actual TE link is not available for some reason (e.g. when there is actual TE link is not available for some reason (e.g. when there is
not yet physical link or manually disable), then the object would be not yet physical link or manually disable), then the object would be
down(2) state. In contrast, if a row is added and the TE link is down(2) state. In contrast, if a row is added and the TE link is
available, this would be operationally up(1)." available, this would be operationally up(1)."
::= { tedEntry 6 } ::= { tedEntry 6 }
tedAreaId OBJECT-TYPE
SYNTAX TedAreaIdTC
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"This object indicates the area identifier of the IGP. If OSPF
is used to advertise LSA, this represents an ospfArea. If ISIS is
used, this represents an area address. Otherwise, this represents
zero."
REFERENCE
" OSPF Version 2, [RFC2328], C.2
OSPF for IPv6, [RFC5340], C.2
[ISO10589], Section 9.8 "
::= { tedEntry 7 }
tedLinkType OBJECT-TYPE tedLinkType OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
pointToPoint (1), pointToPoint (1),
multiAccess (2) multiAccess (2)
} }
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the type of the link such as point-to-point or "This indicates the type of the link such as point-to-point or
multi-access." multi-access."
REFERENCE REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, [RFC " Traffic Engineering (TE) Extensions to OSPF Version 2, [RFC
3630], 2.5.1" 3630], 2.5.1"
::= { tedEntry 7 } ::= { tedEntry 8 }
tedRouterIdAddrType OBJECT-TYPE tedRouterIdAddrType OBJECT-TYPE
SYNTAX InetAddressType SYNTAX InetAddressType
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object indicates the TE-Router ID address type. Only " This object indicates the TE-Router ID address type. Only
values unknown(0), ipv4(1) or ipv6(2) must be supported. " values unknown(0), ipv4(1) or ipv6(2) must be supported. "
::= { tedEntry 8 } ::= { tedEntry 9 }
tedRouterIdAddr OBJECT-TYPE tedRouterIdAddr OBJECT-TYPE
SYNTAX InetAddress SYNTAX InetAddress
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the TE-Router ID." "This object indicates the TE-Router ID."
REFERENCE REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, RFC " Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
3630, 2.4.1" 3630, 2.4.1"
::= { tedEntry 9 } ::= { tedEntry 10 }
tedLinkIdAddrType OBJECT-TYPE tedLinkIdAddrType OBJECT-TYPE
SYNTAX InetAddressType SYNTAX InetAddressType
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object indicates the address type of the TE Link ID. " This object indicates the address type of the TE Link ID.
Only values unknown(0), ipv4(1) or ipv6(2) must be supported." Only values unknown(0), ipv4(1) or ipv6(2) must be supported."
::= { tedEntry 10 } ::= { tedEntry 11 }
tedLinkIdAddr OBJECT-TYPE tedLinkIdAddr OBJECT-TYPE
SYNTAX InetAddress SYNTAX InetAddress
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the Router ID of the neighbor in the case of "This indicates the Router ID of the neighbor in the case of
point-to-point links. This also indicates the interface address of point-to-point links. This also indicates the interface address of
the designated router in the case of multi-access links." the designated router in the case of multi-access links."
REFERENCE REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, [RFC " Traffic Engineering (TE) Extensions to OSPF Version 2, [RFC
3630], 2.5.2" 3630], 2.5.2"
::= { tedEntry 11 } ::= { tedEntry 12 }
tedMetric OBJECT-TYPE tedMetric OBJECT-TYPE
SYNTAX Integer32 SYNTAX Integer32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the traffic engineering metric value of the TE "This indicates the traffic engineering metric value of the TE
link." link."
REFERENCE REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, [RFC " Traffic Engineering (TE) Extensions to OSPF Version 2, [RFC
3630], 2.5.5" 3630], 2.5.5"
::= { tedEntry 12 } ::= { tedEntry 13 }
tedMaxBandwidth OBJECT-TYPE tedMaxBandwidth OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295) SYNTAX Unsigned32 (0..4294967295)
UNITS "Byte per seconds" UNITS "Byte per seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the maximum bandwidth that can be used on this "This indicates the maximum bandwidth that can be used on this
link in this direction." link in this direction."
REFERENCE REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, [RFC " Traffic Engineering (TE) Extensions to OSPF Version 2, [RFC
3630], 2.5.6" 3630], 2.5.6"
::= { tedEntry 13 } ::= { tedEntry 14 }
tedMaxReservableBandwidth OBJECT-TYPE tedMaxReservableBandwidth OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295) SYNTAX Unsigned32 (0..4294967295)
UNITS "Byte per seconds" UNITS "Byte per seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the maximum bandwidth that may be reserved on "This indicates the maximum bandwidth that may be reserved on
this link in this direction." this link in this direction."
REFERENCE REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, [RFC " Traffic Engineering (TE) Extensions to OSPF Version 2, [RFC
3630], 2.5.7" 3630], 2.5.7"
::= { tedEntry 14 } ::= { tedEntry 15 }
tedUnreservedBandwidthPri0 OBJECT-TYPE tedUnreservedBandwidthPri0 OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295) SYNTAX Unsigned32 (0..4294967295)
UNITS "Byte per seconds" UNITS "Byte per seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the amount of bandwidth not yet reserved at the "This indicates the amount of bandwidth not yet reserved at the
priority 0." priority 0."
REFERENCE REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, [RFC " Traffic Engineering (TE) Extensions to OSPF Version 2, [RFC
3630], 2.5.8" 3630], 2.5.8"
::= { tedEntry 15 } ::= { tedEntry 16 }
tedUnreservedBandwidthPri1 OBJECT-TYPE tedUnreservedBandwidthPri1 OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295) SYNTAX Unsigned32 (0..4294967295)
UNITS "Byte per seconds" UNITS "Byte per seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the amount of bandwidth not yet reserved at the "This indicates the amount of bandwidth not yet reserved at the
priority 1." priority 1."
REFERENCE REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, [RFC " Traffic Engineering (TE) Extensions to OSPF Version 2, [RFC
3630], 2.5.8" 3630], 2.5.8"
::= { tedEntry 16 } ::= { tedEntry 17 }
tedUnreservedBandwidthPri2 OBJECT-TYPE tedUnreservedBandwidthPri2 OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295) SYNTAX Unsigned32 (0..4294967295)
UNITS "Byte per seconds" UNITS "Byte per seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the amount of bandwidth not yet reserved at the "This indicates the amount of bandwidth not yet reserved at the
priority 2." priority 2."
REFERENCE REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, [RFC " Traffic Engineering (TE) Extensions to OSPF Version 2, [RFC
3630], 2.5.8" 3630], 2.5.8"
::= { tedEntry 17 } ::= { tedEntry 18 }
tedUnreservedBandwidthPri3 OBJECT-TYPE tedUnreservedBandwidthPri3 OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295) SYNTAX Unsigned32 (0..4294967295)
UNITS "Byte per seconds" UNITS "Byte per seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the amount of bandwidth not yet reserved at the "This indicates the amount of bandwidth not yet reserved at the
priority 3." priority 3."
REFERENCE REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, [RFC " Traffic Engineering (TE) Extensions to OSPF Version 2, [RFC
3630], 2.5.8" 3630], 2.5.8"
::= { tedEntry 18 } ::= { tedEntry 19 }
tedUnreservedBandwidthPri4 OBJECT-TYPE tedUnreservedBandwidthPri4 OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295) SYNTAX Unsigned32 (0..4294967295)
UNITS "Byte per seconds" UNITS "Byte per seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the amount of bandwidth not yet reserved at the "This indicates the amount of bandwidth not yet reserved at the
priority 4." priority 4."
REFERENCE REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, [RFC " Traffic Engineering (TE) Extensions to OSPF Version 2, [RFC
3630], 2.5.8" 3630], 2.5.8"
::= { tedEntry 19 } ::= { tedEntry 20 }
tedUnreservedBandwidthPri5 OBJECT-TYPE tedUnreservedBandwidthPri5 OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295) SYNTAX Unsigned32 (0..4294967295)
UNITS "Byte per seconds" UNITS "Byte per seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the amount of bandwidth not yet reserved at the "This indicates the amount of bandwidth not yet reserved at the
priority 5." priority 5."
REFERENCE REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, [RFC " Traffic Engineering (TE) Extensions to OSPF Version 2, [RFC
3630], 2.5.8" 3630], 2.5.8"
::= { tedEntry 20 } ::= { tedEntry 21 }
tedUnreservedBandwidthPri6 OBJECT-TYPE tedUnreservedBandwidthPri6 OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295) SYNTAX Unsigned32 (0..4294967295)
UNITS "Byte per seconds" UNITS "Byte per seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the amount of bandwidth not yet reserved at the "This indicates the amount of bandwidth not yet reserved at the
priority 6." priority 6."
REFERENCE REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, [RFC " Traffic Engineering (TE) Extensions to OSPF Version 2, [RFC
3630], 2.5.8" 3630], 2.5.8"
::= { tedEntry 21 } ::= { tedEntry 22 }
tedUnreservedBandwidthPri7 OBJECT-TYPE tedUnreservedBandwidthPri7 OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295) SYNTAX Unsigned32 (0..4294967295)
UNITS "Byte per seconds" UNITS "Byte per seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the amount of bandwidth not yet reserved at the "This indicates the amount of bandwidth not yet reserved at the
priority 7." priority 7."
REFERENCE REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, [RFC " Traffic Engineering (TE) Extensions to OSPF Version 2, [RFC
3630], 2.5.8" 3630], 2.5.8"
::= { tedEntry 22 } ::= { tedEntry 23 }
tedAdministrativeGroup OBJECT-TYPE tedAdministrativeGroup OBJECT-TYPE
SYNTAX Integer32 SYNTAX Integer32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the Administrative Group which the link belong "This indicates the Administrative Group which the link belong
to. Since the value is a bit mask, the link can belong to multiple to. Since the value is a bit mask, the link can belong to multiple
groups. This is also called Resource Class/Color." groups. This is also called Resource Class/Color."
REFERENCE REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, [RFC " Traffic Engineering (TE) Extensions to OSPF Version 2, [RFC
3630], 2.5.9" 3630], 2.5.9"
::= { tedEntry 23 } ::= { tedEntry 24 }
tedLocalId OBJECT-TYPE tedLocalId OBJECT-TYPE
SYNTAX Integer32 SYNTAX Integer32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the Link local identifier of an unnumbered "This indicates the Link local identifier of an unnumbered
link." link."
REFERENCE REFERENCE
" OSPF Extensions in Support of GMPLS, [RFC4203], 1.1" " OSPF Extensions in Support of GMPLS, [RFC4203], 1.1"
::= { tedEntry 24 } ::= { tedEntry 25 }
tedRemoteId OBJECT-TYPE tedRemoteId OBJECT-TYPE
SYNTAX Integer32 SYNTAX Integer32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the Link remote identifier of an unnumbered "This indicates the Link remote identifier of an unnumbered
link." link."
REFERENCE REFERENCE
" OSPF Extensions in Support of GMPLS, [RFC4203], 1.1" " OSPF Extensions in Support of GMPLS, [RFC4203], 1.1"
::= { tedEntry 25 } ::= { tedEntry 26 }
tedLinkProtectionType OBJECT-TYPE tedLinkProtectionType OBJECT-TYPE
SYNTAX BITS { SYNTAX BITS {
extraTraffic(0), extraTraffic(0),
unprotected(1), unprotected(1),
shared (2), shared (2),
dedicatedOneToOne (3), dedicatedOneToOne (3),
dedicatedOnePlusOne(4), dedicatedOnePlusOne(4),
enhanced(5) enhanced(5)
} }
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the protection type of the TE link." "This object indicates the protection type of the TE link."
REFERENCE REFERENCE
" OSPF Extensions in Support of GMPLS, [RFC4203], 1.2" " OSPF Extensions in Support of GMPLS, [RFC4203], 1.2"
::= { tedEntry 26 } ::= { tedEntry 27 }
-- --
-- TED Local Interface IP Address Table -- TED Local Interface IP Address Table
-- --
tedLocalIfAddrTable OBJECT-TYPE tedLocalIfAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF TedLocalIfAddrEntry SYNTAX SEQUENCE OF TedLocalIfAddrEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table contains the IP address information of a local TE "This table contains the IP address information of a local TE
link." link."
::= { tedObjects 2 } ::= { tedObjects 2 }
tedLocalIfAddrEntry OBJECT-TYPE tedLocalIfAddrEntry OBJECT-TYPE
SYNTAX TedLocalIfAddrEntry SYNTAX TedLocalIfAddrEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This entry contains the IP address information of the local TE "This entry contains the IP address information of the local TE
link." link."
INDEX { tedAreaId, tedRouterId, tedLinkStateId, INDEX { tedLinkIndex, tedLocalIfAddr }
tedLocalIfAddrIndex }
::= { tedLocalIfAddrTable 1 } ::= { tedLocalIfAddrTable 1 }
TedLocalIfAddrEntry ::= SEQUENCE { TedLocalIfAddrEntry ::= SEQUENCE {
tedLocalIfAddrIndex Unsigned32,
tedLocalIfAddrType InetAddressType, tedLocalIfAddrType InetAddressType,
tedLocalIfAddr InetAddress tedLocalIfAddr InetAddress
}
tedLocalIfAddrIndex OBJECT-TYPE }
SYNTAX Unsigned32 (1..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This indicates the index to identify multiple local TE links."
::= { tedLocalIfAddrEntry 1 }
tedLocalIfAddrType OBJECT-TYPE tedLocalIfAddrType OBJECT-TYPE
SYNTAX InetAddressType SYNTAX InetAddressType
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the address type of the local TE link. "This object indicates the address type of the local TE link.
Only values unknown(0), ipv4(1) or ipv6(2) have to be supported." Only values unknown(0), ipv4(1) or ipv6(2) have to be supported."
::= { tedLocalIfAddrEntry 2 } ::= { tedLocalIfAddrEntry 1 }
tedLocalIfAddr OBJECT-TYPE tedLocalIfAddr OBJECT-TYPE
SYNTAX InetAddress SYNTAX InetAddress
MAX-ACCESS read-only MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the address of the local TE link." "This object indicates the address of the local TE link."
REFERENCE REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, [RFC " Traffic Engineering (TE) Extensions to OSPF Version 2, [RFC
3630], 2.5.3, 3630], 2.5.3,
Traffic Engineering Extensions to OSPF Version3, RFC5329, Traffic Engineering Extensions to OSPF Version3, RFC5329,
4.3" 4.3"
::= { tedLocalIfAddrEntry 3 } ::= { tedLocalIfAddrEntry 2 }
-- --
-- TED Remote Interface IP Address Table -- TED Remote Interface IP Address Table
-- --
tedRemoteIfAddrTable OBJECT-TYPE tedRemoteIfAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF TedRemoteIfAddrEntry SYNTAX SEQUENCE OF TedRemoteIfAddrEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
skipping to change at page 17, line 30 skipping to change at page 17, line 45
link." link."
::= { tedObjects 3 } ::= { tedObjects 3 }
tedRemoteIfAddrEntry OBJECT-TYPE tedRemoteIfAddrEntry OBJECT-TYPE
SYNTAX TedRemoteIfAddrEntry SYNTAX TedRemoteIfAddrEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This entry contains the IP address information of the remote "This entry contains the IP address information of the remote
TE link." TE link."
INDEX { tedAreaId, tedRouterId, tedLinkStateId, INDEX { tedLinkIndex, tedRemoteIfAddr }
tedRemoteIfAddrIndex }
::= { tedRemoteIfAddrTable 1 } ::= { tedRemoteIfAddrTable 1 }
TedRemoteIfAddrEntry ::= SEQUENCE { TedRemoteIfAddrEntry ::= SEQUENCE {
tedRemoteIfAddrIndex Unsigned32,
tedRemoteIfAddrType InetAddressType, tedRemoteIfAddrType InetAddressType,
tedRemoteIfAddr InetAddress tedRemoteIfAddr InetAddress
} }
tedRemoteIfAddrIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"This indicates the index to identify multiple remote TE
links."
::= { tedRemoteIfAddrEntry 1 }
tedRemoteIfAddrType OBJECT-TYPE tedRemoteIfAddrType OBJECT-TYPE
SYNTAX InetAddressType SYNTAX InetAddressType
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the address type of the remote TE link." "This object indicates the address type of the remote TE link."
::= { tedRemoteIfAddrEntry 2 } ::= { tedRemoteIfAddrEntry 1 }
tedRemoteIfAddr OBJECT-TYPE tedRemoteIfAddr OBJECT-TYPE
SYNTAX InetAddress SYNTAX InetAddress
MAX-ACCESS read-only MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the address of the remote TE link." "This object indicates the address of the remote TE link."
REFERENCE REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, [RFC " Traffic Engineering (TE) Extensions to OSPF Version 2, [RFC
3630], 2.5.4, 3630], 2.5.4,
Traffic Engineering Extensions to OSPF Version3, [RFC5329], Traffic Engineering Extensions to OSPF Version3, [RFC5329],
4.4" 4.4"
::= { tedRemoteIfAddrEntry 3 } ::= { tedRemoteIfAddrEntry 2 }
-- --
-- TED Switching Capability Table -- TED Switching Capability Table
-- --
tedSwCapTable OBJECT-TYPE tedSwCapTable OBJECT-TYPE
SYNTAX SEQUENCE OF TedSwCapEntry SYNTAX SEQUENCE OF TedSwCapEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
skipping to change at page 18, line 38 skipping to change at page 18, line 43
tedSwCapEntry OBJECT-TYPE tedSwCapEntry OBJECT-TYPE
SYNTAX TedSwCapEntry SYNTAX TedSwCapEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This entry relates each TE link with its GMPLS TE switching "This entry relates each TE link with its GMPLS TE switching
capability information. IF the MIB deals with only OSPF-TE capability information. IF the MIB deals with only OSPF-TE
information, the value of each object related with GMPLS TE information, the value of each object related with GMPLS TE
extensions should be null." extensions should be null."
INDEX { tedAreaId, tedRouterId, tedLinkStateId, tedSwCapIndex } INDEX { tedLinkIndex, tedSwCapIndex }
::= { tedSwCapTable 1 } ::= { tedSwCapTable 1 }
TedSwCapEntry ::= SEQUENCE { TedSwCapEntry ::= SEQUENCE {
tedSwCapIndex Unsigned32, tedSwCapIndex Unsigned32,
tedSwCapType IANAGmplsSwitchingTypeTC, tedSwCapType IANAGmplsSwitchingTypeTC,
tedSwCapEncoding IANAGmplsLSPEncodingTypeTC, tedSwCapEncoding IANAGmplsLSPEncodingTypeTC,
tedSwCapMaxLspBandwidthPri0 Unsigned32, tedSwCapMaxLspBandwidthPri0 Unsigned32,
tedSwCapMaxLspBandwidthPri1 Unsigned32, tedSwCapMaxLspBandwidthPri1 Unsigned32,
tedSwCapMaxLspBandwidthPri2 Unsigned32, tedSwCapMaxLspBandwidthPri2 Unsigned32,
tedSwCapMaxLspBandwidthPri3 Unsigned32, tedSwCapMaxLspBandwidthPri3 Unsigned32,
skipping to change at page 22, line 26 skipping to change at page 22, line 32
DESCRIPTION DESCRIPTION
"This table contains the SRLG information of the TE link." "This table contains the SRLG information of the TE link."
::= { tedObjects 5 } ::= { tedObjects 5 }
tedSrlgEntry OBJECT-TYPE tedSrlgEntry OBJECT-TYPE
SYNTAX TedSrlgEntry SYNTAX TedSrlgEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This entry relates each TE link with its SRLG information." "This entry relates each TE link with its SRLG information."
INDEX { tedAreaId, tedRouterId, tedLinkStateId, tedSrlgIndex } INDEX { tedLinkIndex, tedSrlgIndex }
::= { tedSrlgTable 1 } ::= { tedSrlgTable 1 }
TedSrlgEntry ::= SEQUENCE { TedSrlgEntry ::= SEQUENCE {
tedSrlgIndex Unsigned32, tedSrlgIndex Unsigned32,
tedSrlg Integer32 tedSrlg Integer32
} }
tedSrlgIndex OBJECT-TYPE tedSrlgIndex OBJECT-TYPE
SYNTAX Unsigned32(1..255) SYNTAX Unsigned32(1..255)
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
skipping to change at page 23, line 39 skipping to change at page 23, line 43
provides the maximum number of notifications generated per minute. " provides the maximum number of notifications generated per minute. "
DEFVAL {0} DEFVAL {0}
::= { tedObjects 7 } ::= { tedObjects 7 }
-- --
-- Notifications -- Notifications
-- --
tedStatusChange NOTIFICATION-TYPE tedStatusChange NOTIFICATION-TYPE
OBJECTS { OBJECTS {
tedLinkInformationSource tedLinkState
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This notification signifies that there has been change in TE "This notification signifies that there has been change in TE
information of tedTable, tedLocalIfAddrTable, tedRemoteIfAddrTable, information of tedTable, tedLocalIfAddrTable, tedRemoteIfAddrTable,
tedSwCapTable and/or tedSrlgTable. For example, this should be tedSwCapTable and/or tedSrlgTable. For example, this should be
generated when tedUnreservedBandwidth is changed to create or delete generated when tedUnreservedBandwidth is changed to create or delete
LSP using registered TE link. " LSP using registered TE link. "
::= { tedNotifications 1 } ::= { tedNotifications 1 }
tedEntryCreated NOTIFICATION-TYPE tedEntryCreated NOTIFICATION-TYPE
OBJECTS { OBJECTS {
tedLinkInformationSource tedLinkState
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This notification signifies that there has been new " This notification signifies that there has been new
registration in ted table by receiving new TE link information. For registration in ted table by receiving new TE link information. For
example, this should be generated when new index (tedAreaId, example, this should be generated when new index (tedLinkIndex) is
tedRouterId and tedLinkStateId) is registered in TED table." registered in TED table."
::= { tedNotifications 2 } ::= { tedNotifications 2 }
tedEntryDeleted NOTIFICATION-TYPE tedEntryDeleted NOTIFICATION-TYPE
OBJECTS { OBJECTS {
tedLinkInformationSource tedLinkState
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This notification signifies that there has been deletion of an "This notification signifies that there has been deletion of an
entry in the ted table. For example, this should be generated when entry in the ted table. For example, this should be generated when
one of existing entries is deleted in TED table." one of existing entries is deleted in TED table."
::= { tedNotifications 3 } ::= { tedNotifications 3 }
-- Conformance Statement -- Conformance Statement
skipping to change at page 26, line 23 skipping to change at page 26, line 28
DESCRIPTION DESCRIPTION
"This group is mandatory for TE links that supports SRLG "This group is mandatory for TE links that supports SRLG
information." information."
::= { tedCompliances 2 } ::= { tedCompliances 2 }
-- Units of conformance -- Units of conformance
tedMainGroup OBJECT-GROUP tedMainGroup OBJECT-GROUP
OBJECTS { OBJECTS {
tedLinkInformationSource ,
tedLinkState , tedLinkState ,
tedAreaId ,
tedLinkType , tedLinkType ,
tedRouterIdAddrType , tedRouterIdAddrType ,
tedRouterIdAddr , tedRouterIdAddr ,
tedLinkIdAddrType , tedLinkIdAddrType ,
tedLinkIdAddr , tedLinkIdAddr ,
tedMetric , tedMetric ,
tedMaxBandwidth , tedMaxBandwidth ,
tedMaxReservableBandwidth , tedMaxReservableBandwidth ,
tedUnreservedBandwidthPri0 , tedUnreservedBandwidthPri0 ,
tedUnreservedBandwidthPri1 , tedUnreservedBandwidthPri1 ,
skipping to change at page 27, line 32 skipping to change at page 27, line 36
tedRemoteId tedRemoteId
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This objects needed to implement the unnumbered links." "This objects needed to implement the unnumbered links."
::= { tedGroups 4 } ::= { tedGroups 4 }
tedNumberedLinkGroup OBJECT-GROUP tedNumberedLinkGroup OBJECT-GROUP
OBJECTS { OBJECTS {
tedLocalIfAddrType, tedLocalIfAddrType,
tedLocalIfAddr, tedRemoteIfAddrType
tedRemoteIfAddrType,
tedRemoteIfAddr
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This objects needed to implement the numbered links." "This objects needed to implement the numbered links."
::= { tedGroups 5 } ::= { tedGroups 5 }
tedSwCapGroup OBJECT-GROUP tedSwCapGroup OBJECT-GROUP
OBJECTS { OBJECTS {
tedSwCapType, tedSwCapType,
tedSwCapEncoding, tedSwCapEncoding,
 End of changes. 70 change blocks. 
158 lines changed or deleted 160 lines changed or added

This html diff was produced by rfcdiff 1.41. The latest version is available from http://tools.ietf.org/tools/rfcdiff/