--- 1/draft-ietf-ccamp-gmpls-ted-mib-10.txt 2012-03-12 16:13:59.742670613 +0100 +++ 2/draft-ietf-ccamp-gmpls-ted-mib-11.txt 2012-03-12 16:13:59.802671446 +0100 @@ -1,26 +1,26 @@ INTERNET-DRAFT Masanori Miyazawa Intended status: Standards Truck KDDI R&D Labs -Expires: June 12, 2012 +Expires: August 12, 2012 Tomohiro Otani Kenji Kumaki KDDI Corporation Thomas D. Nadeau - January 12, 2012 + March 12, 2012 Traffic Engineering Database Management Information Base in support of MPLS-TE/GMPLS - draft-ietf-ccamp-gmpls-ted-mib-10.txt + draft-ietf-ccamp-gmpls-ted-mib-11.txt Status of this Memo This Internet-Draft is submitted to IETF in full conformance with the provisions of BCP 78 and BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF), its areas, and its working groups. Note that other groups may also distribute working documents as Internet-Drafts. @@ -119,22 +119,23 @@ This MIB module should be used in conjunction with OSPFv2 MIB, OSPF v3 MIB and ISIS MIB as well as other MIBs defined in [RFC3812], [RFC3813], [RFC4802], [RFC4803] for the management of MPLS/GMPLS based traffic engineering information. 3. Overview 3.1 Conventions used in this document The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", - "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this - document are to be interpreted as described in RFC-2119 [RFC2119]. + "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and + "OPTIONAL" in this document are to be interpreted as described in + RFC-2119 [RFC2119]. 3.2 Terminology Definitions of key terms for MPLS OAM and GMPLS are found in [RFC4377] and [RFC3945], and the reader is assumed to be familiar with those definitions which are not repeated here. 3.3 Acronyms FSC: Fiber switch capable @@ -213,79 +214,82 @@ tedSrlgTable are not supported. Note that the TED MIB modules are only limited to "read-only" access except for tedCreatedDeletedNotificationMaxRate and tedStatusChangeNotificationMaxRate. The TED MIB is designed to be independent of OSPF or ISIS MIBs, however each TE link information belongs to a node or a link which is managed by the routing protocol. In tedTable: { - tedAreaId.0.3221225985.16777264 0 - tedRouterId.0.3221225985.16777264 1848783410 - tedLinkStateId.0.3221225985.16777264 805306369 - tedLinkInformationSource.0.3221225985.16777264 ospf(2) - tedLinkInformationData.0.3221225985.16777264 zeroDotZero - tedLinkType.0.3221225985.16777264 pointToPoint(1) - tedLinkState.0.3221225985.16777264 up(1) - tedRouterIdAddrType.0.3221225985.16777264 ipv4(1) - tedRouterIdAddr.0.3221225985.16777264192.0.2.1 - tedLinkIdAddrType.0.3221225985.16777264 ipv4(1) - tedLinkIdAddr.0.3221225985.16777264 192.0.2.10 - tedMetric.0.3221225985.16777264 1 - tedMaxBandwidth.0.3221225985.167772641376193201 - tedMaxReservableBandwidth.0.3221225985.16777264 1376193201 - tedUnreservedBandwidthPri0.0.3221225985.16777264 1375888025 - tedUnreservedBandwidthPri1.0.3221225985.16777264 1375888025 - tedUnreservedBandwidthPri2.0.3221225985.16777264 1375888025 - tedUnreservedBandwidthPri3.0.3221225985.16777264 1375888025 - tedUnreservedBandwidthPri4.0.3221225985.16777264 1375888025 - tedUnreservedBandwidthPri5.0.3221225985.16777264 1375888025 - tedUnreservedBandwidthPri6.0.3221225985.16777264 1375888025 - tedUnreservedBandwidthPri7.0.3221225985.16777264 1375888025 - tedAdministrativeGroup.0.3221225985.16777264 0 - tedLocalId.0.3221225985.16777264 0 - tedRemoteId.0.3221225985.16777264 0 - tedLinkProtectionType.0.3221225985.16777264 01 00 00 00 7 + tedLinkInformationData.2.3232235777.3232235778.16777264 zeroDotZero + tedLinkType.2.3232235777.3232235778.16777264 pointToPoint(1) + tedLinkState.2.3232235777.3232235778.16777264 up(1) + tedAreaId.2.3232235777.3232235778.16777264 0 + tedRouterIdAddrType.2.3232235777.3232235778.16777264 ipv4(1) + tedRouterIdAddr.2.3232235777.3232235778.16777264 192.0.2.1 + tedLinkIdAddrType.2.3232235777.3232235778.16777264 ipv4(1) + tedLinkIdAddr.2.3232235777.3232235778.16777264 192.0.2.10 + tedMetric.2.3232235777.3232235778.16777264 1 + tedMaxBandwidth.2.3232235777.3232235778.16777264 1376193201 + tedMaxReservableBandwidth.2.3232235777.3232235778.16777264 1376193201 + tedUnreservedBandwidthPri0.2.3232235777.3232235778.16777264 + 1375888025 + tedUnreservedBandwidthPri1.2.3232235777.3232235778.16777264 + 1375888025 + tedUnreservedBandwidthPri2.2.3232235777.3232235778.16777264 + 1375888025 + tedUnreservedBandwidthPri3.2.3232235777.3232235778.16777264 + 1375888025 + tedUnreservedBandwidthPri4.2.3232235777.3232235778.16777264 + 1375888025 + tedUnreservedBandwidthPri5.2.3232235777.3232235778.16777264 + 1375888025 + tedUnreservedBandwidthPri6.2.3232235777.3232235778.16777264 + 1375888025 + tedUnreservedBandwidthPri7.2.3232235777.3232235778.16777264 + 1375888025 + tedAdministrativeGroup.2.3232235777.3232235778.16777264 0 + tedLocalId.2.3232235777.3232235778.16777264 0 + tedRemoteId.2.3232235777.3232235778.16777264 0 + tedLinkProtectionType.2.3232235777.3232235778.16777264 01 00 00 00 7 In tedLocalIfAddrTable: { - tedLocalIfAddrType.0.3221225985.16777264.0 ipv4(1) - tedLocalIfAddr.0.3221225985.16777264.0 192.0.2.21 + tedLocalIfAddrType.16777264.192.0.2.21 ipv4(1) } In tedRemoteIfAddrTable: { - tedRemoteIfAddrType.0.3221225985.16777264.0 ipv4(1) - tedRemoteIfAddr.0.3221225985.16777264.0 192.0.2.22 + tedRemoteIfAddrType.16777264.192.0.2.22 ipv4(1) } In tedSwCapTable: { - tedSwCapType.0.3221225985.16777264.1 lsc(150) - tedSwCapEncoding.0.3221225985.16777264.1 ethernet(2) - tedSwCapMaxLspBandwidthPri0.0.3221225985.16777264.1 1375888025 - tedSwCapMaxLspBandwidthPri1.0.3221225985.16777264.1 1375888025 - tedSwCapMaxLspBandwidthPri2.0.3221225985.16777264.1 1375888025 - tedSwCapMaxLspBandwidthPri3.0.3221225985.16777264.1 1375888025 - tedSwCapMaxLspBandwidthPri4.0.3221225985.16777264.1 1375888025 - tedSwCapMaxLspBandwidthPri5.0.3221225985.16777264.1 1375888025 - tedSwCapMaxLspBandwidthPri6.0.3221225985.16777264.1 1375888025 - tedSwCapMaxLspBandwidthPri7.0.3221225985.16777264.1 1375888025 - tedSwCapMinLspBandwidth.0.3221225985.16777264.1 0 - tedSwCapIfMtu.0.3221225985.16777264.10 - tedSwCapIndication.0.3221225985.16777264.1 standard(0) + tedSwCapType.16777264.1 lsc(150) + tedSwCapEncoding.16777264.1 ethernet(2) + tedSwCapMaxLspBandwidthPri0.16777264.1 1375888025 + tedSwCapMaxLspBandwidthPri1.16777264.1 1375888025 + tedSwCapMaxLspBandwidthPri2.16777264.1 1375888025 + tedSwCapMaxLspBandwidthPri3.16777264.1 1375888025 + tedSwCapMaxLspBandwidthPri4.16777264.1 1375888025 + tedSwCapMaxLspBandwidthPri5.16777264.1 1375888025 + tedSwCapMaxLspBandwidthPri6.16777264.1 1375888025 + tedSwCapMaxLspBandwidthPri7.16777264.1 1375888025 + tedSwCapMinLspBandwidth.16777264.1 0 + tedSwCapIfMtu.16777264.1 0 + tedSwCapIndication.16777264.1 standard(0) } In tedSrlgTable: { - tedSrlg.0.3221225985.16777264.0 0 + tedSrlg.16777264.1 0 } 7. TED MIB Definitions in support of GMPLS TED-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32, transmission, NOTIFICATION-TYPE FROM SNMPv2-SMI -- RFC2578 @@ -282,33 +286,33 @@ } 7. TED MIB Definitions in support of GMPLS TED-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32, transmission, NOTIFICATION-TYPE FROM SNMPv2-SMI -- RFC2578 + MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF -- RFC2580 TEXTUAL-CONVENTION, RowPointer FROM SNMPv2-TC -- RFC2579 - IANAGmplsLSPEncodingTypeTC, IANAGmplsSwitchingTypeTC FROM IANA-GMPLS-TC-MIB -- RFC4802 InetAddress, InetAddressType FROM INET-ADDRESS-MIB -- [RFC4001] ; tedMIB MODULE-IDENTITY - LAST-UPDATED "201107110000Z" -- 11 July 2011 00:00:00 GMT + LAST-UPDATED "201203120000Z" -- 12 March 2012 00:00:00 GMT ORGANIZATION "IETF CCAMP Working Group." CONTACT-INFO " Tomohiro Otani otani@kddilabs.jp Masanori Miyazawa ma-miyazawa@kddilabs.jp Thomas D. Nadeau tnadeau@lucidvision.com @@ -319,21 +323,21 @@ Comments and discussion to ccamp@ietf.org" DESCRIPTION "This MIB contains managed object definitions for TED in support of MPLS/GMPLS TE Database. Copyright (C) 2011 The IETF Trust. This version of this MIB module is part of RFC xxx; see the RFC itself for full legal notices." -- Revision history. REVISION - "201107110000Z" -- 15 July 2011 00:00:00 GMT + "201203120000Z" -- 12 March 2012 00:00:00 GMT DESCRIPTION "Initial version. Published as RFC xxx." -- RFC-editor pls fill in yyy ::= { transmission yyy } -- assigned by IANA, see section 9.1 for details -- Textual Conventions. TedAreaIdTC ::= TEXTUAL-CONVENTION STATUS current @@ -344,27 +348,28 @@ SYNTAX OCTET STRING (SIZE (0..32)) TedRouterIdTC ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION " The router identifier. If OSPF is used to advertise LSA, this represents a Router ID. If ISIS is used, this represents a System ID." SYNTAX OCTET STRING (SIZE (0..32)) - TedLinkStateIdTC ::= TEXTUAL-CONVENTION + TedLinkIndexTC ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION - " The link state identifier. If OSPF is used, this - represents an ospfLsdbID. If ISIS is used, this represents an - isisLSPID." - SYNTAX OCTET STRING (SIZE (0..32)) + " The link identifier. If OSPF is used, this represents an + ospfLsdbID. If ISIS is used, this represents an isisLSPID. If a + locally configured link is used, this object represents an arbitrary + value which is locally defined in a router" + SYNTAX OCTET STRING (SIZE (0..8)) -- Top level components of this MIB. tedNotifications OBJECT IDENTIFIER ::= { tedMIB 0 } tedObjects OBJECT IDENTIFIER ::= { tedMIB 1 } tedConformance OBJECT IDENTIFIER ::= { tedMIB 2 } -- -- TED Table @@ -379,30 +384,32 @@ supported by [RFC3630]." ::= { tedObjects 1 } tedEntry OBJECT-TYPE SYNTAX TedEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entry contains TED information commonly utilized in both MPLS and GMPLS." - INDEX { tedAreaId, tedRouterId, tedLinkStateId } + INDEX { tedLinkInformationSource, tedLocalRouterId, + tedRemoteRouterId, tedLinkIndex } ::= { tedTable 1 } TedEntry ::= SEQUENCE { - tedAreaId TedAreaIdTC, - tedRouterId TedRouterIdTC, - tedLinkStateId TedLinkStateIdTC, tedLinkInformationSource INTEGER, + tedLocalRouterId TedRouterIdTC, + tedRemoteRouterId TedRouterIdTC, + tedLinkIndex TedLinkIndexTC, tedLinkInformationData RowPointer, tedLinkState INTEGER, + tedAreaId TedAreaIdTC, tedLinkType INTEGER, tedRouterIdAddrType InetAddressType, tedRouterIdAddr InetAddress, tedLinkIdAddrType InetAddressType, tedLinkIdAddr InetAddress, tedMetric Integer32, tedMaxBandwidth Unsigned32, tedMaxReservableBandwidth Unsigned32, tedUnreservedBandwidthPri0 Unsigned32, tedUnreservedBandwidthPri1 Unsigned32, @@ -411,78 +418,80 @@ tedUnreservedBandwidthPri4 Unsigned32, tedUnreservedBandwidthPri5 Unsigned32, tedUnreservedBandwidthPri6 Unsigned32, tedUnreservedBandwidthPri7 Unsigned32, tedAdministrativeGroup Integer32, tedLocalId Integer32, tedRemoteId Integer32, tedLinkProtectionType BITS } - tedAreaId OBJECT-TYPE - SYNTAX TedAreaIdTC + tedLinkInformationSource OBJECT-TYPE + SYNTAX INTEGER { + unknown(0), + locallyConfigured(1), + ospfv2(2), + ospfv3(3), + isis(4), + other(5) + } MAX-ACCESS not-accessible STATUS current DESCRIPTION - "This object indicates the area identifier of the IGP. If OSPF - is used to advertise LSA, this represents an ospfArea. If ISIS is - used, this represents an area address. Otherwise, this represents - zero." - REFERENCE - " OSPF Version 2, [RFC2328], C.2 - OSPF for IPv6, [RFC5340], C.2 - Section 9.8 of [ISO10589]" + "This object indicates the source of the information about the + TE link." ::= { tedEntry 1 } - tedRouterId OBJECT-TYPE + tedLocalRouterId OBJECT-TYPE SYNTAX TedRouterIdTC MAX-ACCESS not-accessible STATUS current DESCRIPTION - "This object indicates the router identifier. If OSPF is used - to advertise LSA, this represents a Router ID. If ISIS is used, this - represents a System ID. Otherwise, this represents zero." + "This object represents the router ID of the router originating + the LSA. If OSPF is used to advertise LSA, this represents a Router + ID. If ISIS is used, this represents a System ID. Otherwise, this + represents zero." REFERENCE " OSPF Version 2, [RFC2328], C.1 OSPF for IPv6, [RFC5340], C.1 - Section 7.1 of [ISO10589]" + [ISO10589], Section 7.1 " ::= { tedEntry 2 } + tedRemoteRouterId OBJECT-TYPE + SYNTAX TedRouterIdTC + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This object indicates the router at the remote end of the link + from the originating router. If OSPF is used to advertise LSA, this + represents a Link ID in the Link TLV. If ISIS is used, this + represents a neighbor system ID defined in [RFC5305]. Otherwise, this + represents zero." + REFERENCE + " OSPF Version 2, [RFC2328], C.1 + OSPF for IPv6, [RFC5340], C.1 + [ISO10589], Section 7.1 + IS-IS extensions for TE [RFC5305], C.3" + ::= { tedEntry 3 } - tedLinkStateId OBJECT-TYPE - SYNTAX TedLinkStateIdTC + tedLinkIndex OBJECT-TYPE + SYNTAX TedLinkIndexTC MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the link state identifier. If OSPF is used, this represents an ospfLsdbID. If ISIS is used, this represents an isisLSPID. Otherwise, this represents a unique identifier within a node." REFERENCE "OSPF Version 2, [RFC2328], A.4.1, OSPF for IPv6, [RFC5340], A.4.2 - Section 9.8 of [ISO10589] " - ::= { tedEntry 3 } - - tedLinkInformationSource OBJECT-TYPE - SYNTAX INTEGER { - unknown(0), - locallyConfigured(1), - ospfv2(2), - ospfv3(3), - isis(4), - other(5) - } - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "This object indicates the source of the information about the - TE link." + [ISO10589], Section 9.8 " ::= { tedEntry 4 } tedLinkInformationData OBJECT-TYPE SYNTAX RowPointer MAX-ACCESS read-only STATUS current DESCRIPTION "This object cross-references the source of the information about this TE link and should be interpretted in the context of tedLinkInformationSource. @@ -518,329 +529,335 @@ STATUS current DESCRIPTION " This object represents the actual operational state of this TE link. For instance, if a row is created in the tedTable, but the actual TE link is not available for some reason (e.g. when there is not yet physical link or manually disable), then the object would be down(2) state. In contrast, if a row is added and the TE link is available, this would be operationally up(1)." ::= { tedEntry 6 } + tedAreaId OBJECT-TYPE + SYNTAX TedAreaIdTC + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object indicates the area identifier of the IGP. If OSPF + is used to advertise LSA, this represents an ospfArea. If ISIS is + used, this represents an area address. Otherwise, this represents + zero." + REFERENCE + " OSPF Version 2, [RFC2328], C.2 + OSPF for IPv6, [RFC5340], C.2 + [ISO10589], Section 9.8 " + ::= { tedEntry 7 } + tedLinkType OBJECT-TYPE SYNTAX INTEGER { pointToPoint (1), multiAccess (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates the type of the link such as point-to-point or multi-access." REFERENCE " Traffic Engineering (TE) Extensions to OSPF Version 2, [RFC 3630], 2.5.1" - ::= { tedEntry 7 } + ::= { tedEntry 8 } tedRouterIdAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION " This object indicates the TE-Router ID address type. Only values unknown(0), ipv4(1) or ipv6(2) must be supported. " - ::= { tedEntry 8 } + ::= { tedEntry 9 } tedRouterIdAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the TE-Router ID." REFERENCE " Traffic Engineering (TE) Extensions to OSPF Version 2, RFC 3630, 2.4.1" - ::= { tedEntry 9 } + ::= { tedEntry 10 } tedLinkIdAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION " This object indicates the address type of the TE Link ID. Only values unknown(0), ipv4(1) or ipv6(2) must be supported." - ::= { tedEntry 10 } + ::= { tedEntry 11 } tedLinkIdAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates the Router ID of the neighbor in the case of point-to-point links. This also indicates the interface address of the designated router in the case of multi-access links." REFERENCE " Traffic Engineering (TE) Extensions to OSPF Version 2, [RFC 3630], 2.5.2" - ::= { tedEntry 11 } + ::= { tedEntry 12 } tedMetric OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates the traffic engineering metric value of the TE link." REFERENCE " Traffic Engineering (TE) Extensions to OSPF Version 2, [RFC 3630], 2.5.5" - ::= { tedEntry 12 } + ::= { tedEntry 13 } tedMaxBandwidth OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) UNITS "Byte per seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates the maximum bandwidth that can be used on this link in this direction." REFERENCE " Traffic Engineering (TE) Extensions to OSPF Version 2, [RFC 3630], 2.5.6" - ::= { tedEntry 13 } + ::= { tedEntry 14 } tedMaxReservableBandwidth OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) UNITS "Byte per seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates the maximum bandwidth that may be reserved on this link in this direction." REFERENCE " Traffic Engineering (TE) Extensions to OSPF Version 2, [RFC 3630], 2.5.7" - ::= { tedEntry 14 } + ::= { tedEntry 15 } tedUnreservedBandwidthPri0 OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) UNITS "Byte per seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates the amount of bandwidth not yet reserved at the priority 0." REFERENCE " Traffic Engineering (TE) Extensions to OSPF Version 2, [RFC 3630], 2.5.8" - ::= { tedEntry 15 } + ::= { tedEntry 16 } tedUnreservedBandwidthPri1 OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) UNITS "Byte per seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates the amount of bandwidth not yet reserved at the priority 1." REFERENCE " Traffic Engineering (TE) Extensions to OSPF Version 2, [RFC 3630], 2.5.8" - ::= { tedEntry 16 } + ::= { tedEntry 17 } tedUnreservedBandwidthPri2 OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) UNITS "Byte per seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates the amount of bandwidth not yet reserved at the priority 2." REFERENCE " Traffic Engineering (TE) Extensions to OSPF Version 2, [RFC 3630], 2.5.8" - ::= { tedEntry 17 } + ::= { tedEntry 18 } tedUnreservedBandwidthPri3 OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) UNITS "Byte per seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates the amount of bandwidth not yet reserved at the priority 3." REFERENCE " Traffic Engineering (TE) Extensions to OSPF Version 2, [RFC 3630], 2.5.8" - ::= { tedEntry 18 } + ::= { tedEntry 19 } tedUnreservedBandwidthPri4 OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) UNITS "Byte per seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates the amount of bandwidth not yet reserved at the priority 4." REFERENCE " Traffic Engineering (TE) Extensions to OSPF Version 2, [RFC 3630], 2.5.8" - ::= { tedEntry 19 } + ::= { tedEntry 20 } tedUnreservedBandwidthPri5 OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) UNITS "Byte per seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates the amount of bandwidth not yet reserved at the priority 5." REFERENCE " Traffic Engineering (TE) Extensions to OSPF Version 2, [RFC 3630], 2.5.8" - ::= { tedEntry 20 } - + ::= { tedEntry 21 } tedUnreservedBandwidthPri6 OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) UNITS "Byte per seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates the amount of bandwidth not yet reserved at the priority 6." REFERENCE " Traffic Engineering (TE) Extensions to OSPF Version 2, [RFC 3630], 2.5.8" - ::= { tedEntry 21 } + ::= { tedEntry 22 } tedUnreservedBandwidthPri7 OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) UNITS "Byte per seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates the amount of bandwidth not yet reserved at the priority 7." REFERENCE " Traffic Engineering (TE) Extensions to OSPF Version 2, [RFC 3630], 2.5.8" - ::= { tedEntry 22 } + ::= { tedEntry 23 } tedAdministrativeGroup OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates the Administrative Group which the link belong to. Since the value is a bit mask, the link can belong to multiple groups. This is also called Resource Class/Color." REFERENCE " Traffic Engineering (TE) Extensions to OSPF Version 2, [RFC 3630], 2.5.9" - ::= { tedEntry 23 } + ::= { tedEntry 24 } tedLocalId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates the Link local identifier of an unnumbered link." REFERENCE " OSPF Extensions in Support of GMPLS, [RFC4203], 1.1" - ::= { tedEntry 24 } + ::= { tedEntry 25 } tedRemoteId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates the Link remote identifier of an unnumbered link." REFERENCE " OSPF Extensions in Support of GMPLS, [RFC4203], 1.1" - ::= { tedEntry 25 } + ::= { tedEntry 26 } tedLinkProtectionType OBJECT-TYPE SYNTAX BITS { extraTraffic(0), unprotected(1), shared (2), dedicatedOneToOne (3), dedicatedOnePlusOne(4), enhanced(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the protection type of the TE link." REFERENCE " OSPF Extensions in Support of GMPLS, [RFC4203], 1.2" - ::= { tedEntry 26 } + ::= { tedEntry 27 } + -- -- TED Local Interface IP Address Table -- tedLocalIfAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF TedLocalIfAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the IP address information of a local TE link." ::= { tedObjects 2 } tedLocalIfAddrEntry OBJECT-TYPE SYNTAX TedLocalIfAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entry contains the IP address information of the local TE link." - INDEX { tedAreaId, tedRouterId, tedLinkStateId, - tedLocalIfAddrIndex } + INDEX { tedLinkIndex, tedLocalIfAddr } ::= { tedLocalIfAddrTable 1 } TedLocalIfAddrEntry ::= SEQUENCE { - tedLocalIfAddrIndex Unsigned32, tedLocalIfAddrType InetAddressType, tedLocalIfAddr InetAddress - } - tedLocalIfAddrIndex OBJECT-TYPE - SYNTAX Unsigned32 (1..255) - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "This indicates the index to identify multiple local TE links." - ::= { tedLocalIfAddrEntry 1 } + } tedLocalIfAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the address type of the local TE link. Only values unknown(0), ipv4(1) or ipv6(2) have to be supported." - ::= { tedLocalIfAddrEntry 2 } + ::= { tedLocalIfAddrEntry 1 } tedLocalIfAddr OBJECT-TYPE SYNTAX InetAddress - MAX-ACCESS read-only + MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the address of the local TE link." REFERENCE " Traffic Engineering (TE) Extensions to OSPF Version 2, [RFC 3630], 2.5.3, Traffic Engineering Extensions to OSPF Version3, RFC5329, 4.3" - ::= { tedLocalIfAddrEntry 3 } + ::= { tedLocalIfAddrEntry 2 } -- -- TED Remote Interface IP Address Table -- tedRemoteIfAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF TedRemoteIfAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION @@ -848,59 +865,48 @@ link." ::= { tedObjects 3 } tedRemoteIfAddrEntry OBJECT-TYPE SYNTAX TedRemoteIfAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entry contains the IP address information of the remote TE link." - INDEX { tedAreaId, tedRouterId, tedLinkStateId, - tedRemoteIfAddrIndex } + INDEX { tedLinkIndex, tedRemoteIfAddr } ::= { tedRemoteIfAddrTable 1 } TedRemoteIfAddrEntry ::= SEQUENCE { - tedRemoteIfAddrIndex Unsigned32, tedRemoteIfAddrType InetAddressType, tedRemoteIfAddr InetAddress } - tedRemoteIfAddrIndex OBJECT-TYPE - SYNTAX Unsigned32 (1..255) - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "This indicates the index to identify multiple remote TE - links." - ::= { tedRemoteIfAddrEntry 1 } - tedRemoteIfAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the address type of the remote TE link." - ::= { tedRemoteIfAddrEntry 2 } + ::= { tedRemoteIfAddrEntry 1 } tedRemoteIfAddr OBJECT-TYPE SYNTAX InetAddress - MAX-ACCESS read-only + MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object indicates the address of the remote TE link." REFERENCE " Traffic Engineering (TE) Extensions to OSPF Version 2, [RFC 3630], 2.5.4, Traffic Engineering Extensions to OSPF Version3, [RFC5329], 4.4" - ::= { tedRemoteIfAddrEntry 3 } + ::= { tedRemoteIfAddrEntry 2 } -- -- TED Switching Capability Table -- tedSwCapTable OBJECT-TYPE SYNTAX SEQUENCE OF TedSwCapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION @@ -910,21 +916,21 @@ tedSwCapEntry OBJECT-TYPE SYNTAX TedSwCapEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entry relates each TE link with its GMPLS TE switching capability information. IF the MIB deals with only OSPF-TE information, the value of each object related with GMPLS TE extensions should be null." - INDEX { tedAreaId, tedRouterId, tedLinkStateId, tedSwCapIndex } + INDEX { tedLinkIndex, tedSwCapIndex } ::= { tedSwCapTable 1 } TedSwCapEntry ::= SEQUENCE { tedSwCapIndex Unsigned32, tedSwCapType IANAGmplsSwitchingTypeTC, tedSwCapEncoding IANAGmplsLSPEncodingTypeTC, tedSwCapMaxLspBandwidthPri0 Unsigned32, tedSwCapMaxLspBandwidthPri1 Unsigned32, tedSwCapMaxLspBandwidthPri2 Unsigned32, tedSwCapMaxLspBandwidthPri3 Unsigned32, @@ -1114,21 +1122,21 @@ DESCRIPTION "This table contains the SRLG information of the TE link." ::= { tedObjects 5 } tedSrlgEntry OBJECT-TYPE SYNTAX TedSrlgEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entry relates each TE link with its SRLG information." - INDEX { tedAreaId, tedRouterId, tedLinkStateId, tedSrlgIndex } + INDEX { tedLinkIndex, tedSrlgIndex } ::= { tedSrlgTable 1 } TedSrlgEntry ::= SEQUENCE { tedSrlgIndex Unsigned32, tedSrlg Integer32 } tedSrlgIndex OBJECT-TYPE SYNTAX Unsigned32(1..255) MAX-ACCESS not-accessible @@ -1180,46 +1188,46 @@ provides the maximum number of notifications generated per minute. " DEFVAL {0} ::= { tedObjects 7 } -- -- Notifications -- tedStatusChange NOTIFICATION-TYPE OBJECTS { - tedLinkInformationSource + tedLinkState } STATUS current DESCRIPTION "This notification signifies that there has been change in TE information of tedTable, tedLocalIfAddrTable, tedRemoteIfAddrTable, tedSwCapTable and/or tedSrlgTable. For example, this should be generated when tedUnreservedBandwidth is changed to create or delete LSP using registered TE link. " ::= { tedNotifications 1 } tedEntryCreated NOTIFICATION-TYPE OBJECTS { - tedLinkInformationSource + tedLinkState } STATUS current DESCRIPTION " This notification signifies that there has been new registration in ted table by receiving new TE link information. For - example, this should be generated when new index (tedAreaId, - tedRouterId and tedLinkStateId) is registered in TED table." + example, this should be generated when new index (tedLinkIndex) is + registered in TED table." ::= { tedNotifications 2 } tedEntryDeleted NOTIFICATION-TYPE OBJECTS { - tedLinkInformationSource + tedLinkState } STATUS current DESCRIPTION "This notification signifies that there has been deletion of an entry in the ted table. For example, this should be generated when one of existing entries is deleted in TED table." ::= { tedNotifications 3 } -- Conformance Statement @@ -1325,22 +1333,22 @@ DESCRIPTION "This group is mandatory for TE links that supports SRLG information." ::= { tedCompliances 2 } -- Units of conformance tedMainGroup OBJECT-GROUP OBJECTS { - tedLinkInformationSource , tedLinkState , + tedAreaId , tedLinkType , tedRouterIdAddrType , tedRouterIdAddr , tedLinkIdAddrType , tedLinkIdAddr , tedMetric , tedMaxBandwidth , tedMaxReservableBandwidth , tedUnreservedBandwidthPri0 , tedUnreservedBandwidthPri1 , @@ -1388,23 +1395,21 @@ tedRemoteId } STATUS current DESCRIPTION "This objects needed to implement the unnumbered links." ::= { tedGroups 4 } tedNumberedLinkGroup OBJECT-GROUP OBJECTS { tedLocalIfAddrType, - tedLocalIfAddr, - tedRemoteIfAddrType, - tedRemoteIfAddr + tedRemoteIfAddrType } STATUS current DESCRIPTION "This objects needed to implement the numbered links." ::= { tedGroups 5 } tedSwCapGroup OBJECT-GROUP OBJECTS { tedSwCapType, tedSwCapEncoding,