draft-ietf-ccamp-gmpls-ted-mib-13.txt   draft-ietf-ccamp-gmpls-ted-mib-14.txt 
INTERNET-DRAFT Masanori Miyazawa INTERNET-DRAFT Masanori Miyazawa
Intended status: Standards Truck KDDI R&D Labs Intended status: Proposed Standard KDDI R&D Labs
Expires: October 7, 2012 Expires: March 4, 2013
Tomohiro Otani Tomohiro Otani
Kenji Kumaki Kenji Kumaki
KDDI Corporation KDDI Corporation
Thomas D. Nadeau Thomas D. Nadeau
May 8, 2012 October 4, 2012
Traffic Engineering Database Management Information Base in support of Traffic Engineering Database Management Information Base in support of
MPLS-TE/GMPLS MPLS-TE/GMPLS
draft-ietf-ccamp-gmpls-ted-mib-13.txt draft-ietf-ccamp-gmpls-ted-mib-14.txt
Status of this Memo Status of this Memo
This Internet-Draft is submitted to IETF in full conformance with This Internet-Draft is submitted to IETF in full conformance with
the provisions of BCP 78 and BCP 79. the provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF), its areas, and its working groups. Note that other Task Force (IETF), its areas, and its working groups. Note that other
groups may also distribute working documents as Internet-Drafts. groups may also distribute working documents as Internet-Drafts.
skipping to change at page 2, line 24 skipping to change at page 2, line 24
Status of this Memo................................................... 1 Status of this Memo................................................... 1
Abstract.............................................................. 2 Abstract.............................................................. 2
1. The Internet-Standard Management Framework......................... 3 1. The Internet-Standard Management Framework......................... 3
2. Introduction....................................................... 3 2. Introduction....................................................... 3
3. Overview........................................................... 3 3. Overview........................................................... 3
3.1 Conventions used in this document................................. 3 3.1 Conventions used in this document................................. 3
3.2 Terminology....................................................... 3 3.2 Terminology....................................................... 3
3.3 Acronyms.......................................................... 4 3.3 Acronyms.......................................................... 4
4. Motivations........................................................ 4 4. Motivations........................................................ 4
5. Brief description of MIB Objects................................... 4 5. Brief Description of MIB Modules................................... 4
5.1 tedTable.......................................................... 4 5.1 tedTable.......................................................... 4
5.2 tedLocalIfAddrTable............................................... 4 5.2 tedLocalIfAddrTable............................................... 4
5.3 tedRemoteIfAddrTable.............................................. 4 5.3 tedRemoteIfAddrTable.............................................. 4
5.4 tedSwCapTable..................................................... 5 5.4 tedSwCapTable..................................................... 4
5.5 tedSrlgTable...................................................... 5 5.5 tedSrlgTable...................................................... 5
6. Example of the TED MIB module usage................................ 5 6. Example of the TED MIB Module Usage................................ 5
7. TED MIB Definitions in support of GMPLS............................ 6 7. TED MIB Module Definitions in support of GMPLS..................... 6
8. Security consideration............................................ 28 8. Security Consideration............................................ 29
9. IANA Considerations............................................... 29 9. IANA Considerations............................................... 30
9.1 IANA Considerations for TED-MIB.................................. 29 9.1 IANA Considerations for TED-MIB.................................. 30
10. References....................................................... 29 10. References....................................................... 30
10.1 Normative References............................................ 29 10.1 Normative References............................................ 30
10.2 Informative References.......................................... 29 10.2 Informative References.......................................... 30
11. Acknowledgment................................................... 31 11. Acknowledgment................................................... 32
12. Authors' Addresses............................................... 32 12. Authors' Addresses............................................... 32
1. The Internet-Standard Management Framework 1. The Internet-Standard Management Framework
For a detailed overview of the documents that describe the current For a detailed overview of the documents that describe the current
Internet-Standard Management Framework, please refer to section 7 of Internet-Standard Management Framework, please refer to section 7 of
RFC 3410 [RFC3410]. RFC 3410 [RFC3410].
Managed objects are accessed via a virtual information store, termed Managed objects are accessed via a virtual information store, termed
the Management Information Base or MIB. MIB objects are generally the Management Information Base or MIB. MIB objects are generally
accessed through the Simple Network Management Protocol (SNMP). accessed through the Simple Network Management Protocol (SNMP).
skipping to change at page 4, line 7 skipping to change at page 4, line 7
RFC-2119 [RFC2119]. RFC-2119 [RFC2119].
3.2 Terminology 3.2 Terminology
Definitions of key terms for MPLS OAM and GMPLS are found in Definitions of key terms for MPLS OAM and GMPLS are found in
[RFC4377] and [RFC3945], and the reader is assumed to be familiar [RFC4377] and [RFC3945], and the reader is assumed to be familiar
with those definitions which are not repeated here. with those definitions which are not repeated here.
3.3 Acronyms 3.3 Acronyms
FSC: Fiber switch capable
GMPLS: Generalized Multi-Protocol Label Switching GMPLS: Generalized Multi-Protocol Label Switching
ISIS: Intermediate System to Intermediate System ISIS: Intermediate System to Intermediate System
LDP: Label Distribution Protocol
LSA: Link state advertisement LSA: Link state advertisement
LSC: Lambda switch capable
LSP: Label Switching Path LSP: Label Switching Path
LSR: Label Switching Router LSR: Label Switching Router
MIB: Management Information Base MIB: Management Information Base
OAM: Operations and Management
OA&M: Operations, Administration and Maintenance.
OSPF: Open Shortest Path First OSPF: Open Shortest Path First
PSC: Packet switch capable PSC: Packet switch capable
RSVP: Resource reSerVation Protocol
SRLG: Shared risk link group SRLG: Shared risk link group
TE: Traffic Engineering TE: Traffic Engineering
TED: Traffic Engineering Database TED: Traffic Engineering Database
TDM: Time Division Multiplexing TDM: Time Division Multiplexing
4. Motivations 4. Motivations
The existing OSPFv2, OSPFv3, ISIS, MPLS and GMPLS MIBs do not provide The existing OSPFv2, OSPFv3, ISIS, MPLS and GMPLS MIBs do not provide
for the management interface to retrieve topology information of MPLS for the management interface to retrieve topology information of MPLS
and GMPLS networks. and GMPLS networks.
5. Brief description of MIB Objects 5. Brief Description of MIB Modules
The objects described in this section support the management of TED The objects described in this section support the management of TED
described in [RFC4202], [RFC4203] and [RFC5307] for GMPLS extensions described in [RFC4202], [RFC4203] and [RFC5307] for GMPLS extensions
as well as in [RFC3630] and [RFC5305] for MPLS/GMPLS. as well as in [RFC3630] and [RFC5305] for MPLS/GMPLS.
5.1 tedTable 5.1 tedTable
The tedTable is basically used to indicate TED information of OSPF-TE The tedTable is basically used to indicate TED information of OSPF-TE
or ISIS-TE. However, this table does not contain information for or ISIS-TE. However, this table does not contain information for
Local/Remote interface IP address, Interface Switching Capability Local/Remote interface IP address, Interface Switching Capability
skipping to change at page 5, line 31 skipping to change at page 5, line 26
In this section, we provide an example of the TED MIB module usage. In this section, we provide an example of the TED MIB module usage.
The following indicates the information of a numbered TE link The following indicates the information of a numbered TE link
originated in a GMPLS controlled node. When TE link information is originated in a GMPLS controlled node. When TE link information is
retrieved in a MPLS network, GMPLS specific objects such as retrieved in a MPLS network, GMPLS specific objects such as
tedLocalIfAddrTable, tedRemoteIfAddrTable, tedSwCapTable and tedLocalIfAddrTable, tedRemoteIfAddrTable, tedSwCapTable and
tedSrlgTable are not supported. tedSrlgTable are not supported.
Note that the TED MIB modules are only limited to "read-only" access Note that the TED MIB modules are only limited to "read-only" access
except for tedCreatedDeletedNotificationMaxRate and except for tedCreatedDeletedNotificationMaxRate and
tedStatusChangeNotificationMaxRate. The TED MIB is designed to be tedStatusChangeNotificationMaxRate. The TED MIB module is designed to
independent of OSPF or ISIS MIBs, however each TE link information be independent of OSPF or ISIS MIBs, however each TE link information
belongs to a node or a link which is managed by the routing protocol. belongs to a node or a link which is managed by the routing protocol.
In tedTable: In tedTable:
{ {
tedLinkInformationData.3232235777.3232235778.2.16777264 zeroDotZero tedLinkInformationData.2.3232235777.3232235778.16777264 zeroDotZero
tedLinkType.3232235777.3232235778.2.16777264 pointToPoint(1) tedLinkType.2.3232235777.3232235778.16777264 pointToPoint(1)
tedLinkState.3232235777.3232235778.2.16777264 up(1) tedLinkState.2.3232235777.3232235778.16777264 up(1)
tedAreaId.3232235777.3232235778.2.16777264 0 tedAreaId.2.3232235777.3232235778.16777264 0
tedRouterIdAddrType.3232235777.3232235778.2.16777264 ipv4(1) tedTeRouterIdAddrType.2.3232235777.3232235778.16777264 ipv4(1)
tedRouterIdAddr.3232235777.3232235778.2.16777264 192.0.2.1 tedTeRouterIdAddr.2.3232235777.3232235778.16777264 192.0.2.1
tedLinkIdAddrType.3232235777.3232235778.2.16777264 ipv4(1) tedLinkIdAddrType.2.3232235777.3232235778.16777264 ipv4(1)
tedLinkIdAddr.3232235777.3232235778.2.16777264 192.0.2.10 tedLinkIdAddr.2.3232235777.3232235778.16777264 192.0.2.10
tedMetric.3232235777.3232235778.2.16777264 1 tedMetric.2.3232235777.3232235778.16777264 1
tedMaxBandwidth.3232235777.3232235778.2.16777264 4d9450c0 tedMaxBandwidth.2.3232235777.3232235778.16777264 4d9450c0
tedMaxReservableBandwidth.3232235777.3232235778.2.16777264 4d9450c0 tedMaxReservableBandwidth.2.3232235777.3232235778.16777264 4d9450c0
tedUnreservedBandwidthPri0.3232235777.3232235778.2.16777264 4d9450c0 tedUnreservedBandwidthPri0.2.3232235777.3232235778.16777264 4d9450c0
tedUnreservedBandwidthPri1.3232235777.3232235778.2.16777264 4d9450c0 tedUnreservedBandwidthPri1.2.3232235777.3232235778.16777264 4d9450c0
tedUnreservedBandwidthPri2.3232235777.3232235778.2.16777264 4d9450c0 tedUnreservedBandwidthPri2.2.3232235777.3232235778.16777264 4d9450c0
tedUnreservedBandwidthPri3.3232235777.3232235778.2.16777264 4d9450c0 tedUnreservedBandwidthPri3.2.3232235777.3232235778.16777264 4d9450c0
tedUnreservedBandwidthPri4.3232235777.3232235778.2.16777264 4d9450c0 tedUnreservedBandwidthPri4.2.3232235777.3232235778.16777264 4d9450c0
tedUnreservedBandwidthPri5.3232235777.3232235778.2.16777264 4d9450c0 tedUnreservedBandwidthPri5.2.3232235777.3232235778.16777264 4d9450c0
tedUnreservedBandwidthPri6.3232235777.3232235778.2.16777264 4d9450c0 tedUnreservedBandwidthPri6.2.3232235777.3232235778.16777264 4d9450c0
tedUnreservedBandwidthPri7.3232235777.3232235778.2.16777264 4d9450c0 tedUnreservedBandwidthPri7.2.3232235777.3232235778.16777264 4d9450c0
tedAdministrativeGroup.3232235777.3232235778.2.16777264 0 tedAdministrativeGroup.2.3232235777.3232235778.16777264 0
tedLocalId.3232235777.3232235778.2.16777264 0 tedLocalId.2.3232235777.3232235778.16777264 0
tedRemoteId.3232235777.3232235778.2.16777264 0 tedRemoteId.2.3232235777.3232235778.16777264 0
tedLinkProtectionType.3232235777.3232235778.2.16777264 01 00 00 00 7 tedLinkProtectionType.2.3232235777.3232235778.16777264 01 00 00 00 7
}
In tedLocalIfAddrTable: In tedLocalIfAddrTable:
{ {
tedLocalIfAddrType.16777264.192.0.2.21 ipv4(1) tedLocalIfAddrType.16777264.192.0.2.21 ipv4(1)
} }
In tedRemoteIfAddrTable: In tedRemoteIfAddrTable:
{ {
tedRemoteIfAddrType.16777264.192.0.2.22 ipv4(1) tedRemoteIfAddrType.16777264.192.0.2.22 ipv4(1)
} }
skipping to change at page 7, line 8 skipping to change at page 7, line 4
FROM SNMPv2-TC -- RFC2579 FROM SNMPv2-TC -- RFC2579
IANAGmplsLSPEncodingTypeTC, IANAGmplsSwitchingTypeTC IANAGmplsLSPEncodingTypeTC, IANAGmplsSwitchingTypeTC
FROM IANA-GMPLS-TC-MIB -- RFC4802 FROM IANA-GMPLS-TC-MIB -- RFC4802
InetAddress, InetAddressType InetAddress, InetAddressType
FROM INET-ADDRESS-MIB -- RFC4001 FROM INET-ADDRESS-MIB -- RFC4001
Float32TC Float32TC
FROM FLOAT-TC-MIB -- RFC6340 FROM FLOAT-TC-MIB -- RFC6340
; ;
tedMIB MODULE-IDENTITY tedMIB MODULE-IDENTITY
LAST-UPDATED "201205070000Z" -- 7 May 2012 00:00:00 GMT LAST-UPDATED "201210040000Z" -- 4 Oct. 2012 00:00:00 GMT
ORGANIZATION "IETF CCAMP Working Group." ORGANIZATION "IETF CCAMP Working Group."
CONTACT-INFO CONTACT-INFO
" Tomohiro Otani " Tomohiro Otani
otani@kddilabs.jp otani@kddilabs.jp
Masanori Miyazawa Masanori Miyazawa
ma-miyazawa@kddilabs.jp ma-miyazawa@kddilabs.jp
Thomas D. Nadeau Thomas D. Nadeau
tnadeau@lucidvision.com tnadeau@lucidvision.com
Kenji Kumaki Kenji Kumaki
ke-kumaki@kddilabs.jp ke-kumaki@kddilabs.jp
Comments and discussion to ccamp@ietf.org" Comments and discussion to ccamp@ietf.org"
DESCRIPTION DESCRIPTION
"This MIB contains managed object definitions for TED in "This MIB module contains managed object definitions for TED
support of MPLS/GMPLS TE Database. in support of MPLS/GMPLS TE Database.
Copyright (C) 2011 The IETF Trust. This version of this MIB Copyright (C) 2012 The IETF Trust. This version of this MIB
module is part of RFC xxx; see the RFC itself for full legal module is part of RFC xxx; see the RFC itself for full legal
notices." notices."
-- Revision history. -- Revision history.
REVISION REVISION
"201205070000Z" -- 7 May 2012 00:00:00 GMT "201210040000Z" -- 4 Oct. 2012 00:00:00 GMT
DESCRIPTION DESCRIPTION
"Initial version. Published as RFC xxx." "Initial version. Published as RFC xxx."
-- RFC-editor pls fill in yyy -- RFC-editor pls fill in yyy
::= { transmission yyy } ::= { transmission yyy }
-- assigned by IANA, see section 9.1 for details -- assigned by IANA, see section 9.1 for details
-- Textual Conventions. -- Textual Conventions.
TedAreaIdTC ::= TEXTUAL-CONVENTION TedAreaIdTC ::= TEXTUAL-CONVENTION
STATUS current STATUS current
skipping to change at page 8, line 14 skipping to change at page 8, line 10
TedLinkIndexTC ::= TEXTUAL-CONVENTION TedLinkIndexTC ::= TEXTUAL-CONVENTION
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" The link identifier. If OSPF is used, this represents an " The link identifier. If OSPF is used, this represents an
ospfLsdbID. If ISIS is used, this represents an isisLSPID. If a ospfLsdbID. If ISIS is used, this represents an isisLSPID. If a
locally configured link is used, this object represents an arbitrary locally configured link is used, this object represents an arbitrary
value which is locally defined in a router" value which is locally defined in a router"
SYNTAX OCTET STRING (SIZE (0..8)) SYNTAX OCTET STRING (SIZE (0..8))
-- Top level components of this MIB. -- Top level components of this MIB module.
tedNotifications OBJECT IDENTIFIER ::= { tedMIB 0 } tedNotifications OBJECT IDENTIFIER ::= { tedMIB 0 }
tedObjects OBJECT IDENTIFIER ::= { tedMIB 1 } tedObjects OBJECT IDENTIFIER ::= { tedMIB 1 }
tedConformance OBJECT IDENTIFIER ::= { tedMIB 2 } tedConformance OBJECT IDENTIFIER ::= { tedMIB 2 }
-- --
-- TED Table -- TED Table
-- --
tedTable OBJECT-TYPE tedTable OBJECT-TYPE
SYNTAX SEQUENCE OF TedEntry SYNTAX SEQUENCE OF TedEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table indicates multiple TED information which has been "This table indicates multiple TED information which has been
supported by [RFC3630]." supported by RFC3630 and RFC5305."
::= { tedObjects 1 } ::= { tedObjects 1 }
tedEntry OBJECT-TYPE tedEntry OBJECT-TYPE
SYNTAX TedEntry SYNTAX TedEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This entry contains TED information commonly utilized in both "This entry contains TED information commonly utilized in both
MPLS and GMPLS." MPLS and GMPLS."
INDEX { tedLocalRouterId, tedRemoteRouterId, INDEX { tedLocalRouterId, tedRemoteRouterId,
skipping to change at page 8, line 54 skipping to change at page 8, line 50
TedEntry ::= SEQUENCE { TedEntry ::= SEQUENCE {
tedLinkInformationSource INTEGER, tedLinkInformationSource INTEGER,
tedLocalRouterId TedRouterIdTC, tedLocalRouterId TedRouterIdTC,
tedRemoteRouterId TedRouterIdTC, tedRemoteRouterId TedRouterIdTC,
tedLinkIndex TedLinkIndexTC, tedLinkIndex TedLinkIndexTC,
tedLinkInformationData RowPointer, tedLinkInformationData RowPointer,
tedLinkState INTEGER, tedLinkState INTEGER,
tedAreaId TedAreaIdTC, tedAreaId TedAreaIdTC,
tedLinkType INTEGER, tedLinkType INTEGER,
tedRouterIdAddrType InetAddressType, tedTeRouterIdAddrType InetAddressType,
tedRouterIdAddr InetAddress, tedTeRouterIdAddr InetAddress,
tedLinkIdAddrType InetAddressType, tedLinkIdAddrType InetAddressType,
tedLinkIdAddr InetAddress, tedLinkIdAddr InetAddress,
tedMetric Integer32, tedMetric Integer32,
tedMaxBandwidth Float32TC, tedMaxBandwidth Float32TC,
tedMaxReservableBandwidth Float32TC, tedMaxReservableBandwidth Float32TC,
tedUnreservedBandwidthPri0 Float32TC, tedUnreservedBandwidthPri0 Float32TC,
tedUnreservedBandwidthPri1 Float32TC, tedUnreservedBandwidthPri1 Float32TC,
tedUnreservedBandwidthPri2 Float32TC, tedUnreservedBandwidthPri2 Float32TC,
tedUnreservedBandwidthPri3 Float32TC, tedUnreservedBandwidthPri3 Float32TC,
tedUnreservedBandwidthPri4 Float32TC, tedUnreservedBandwidthPri4 Float32TC,
skipping to change at page 9, line 46 skipping to change at page 9, line 43
tedLocalRouterId OBJECT-TYPE tedLocalRouterId OBJECT-TYPE
SYNTAX TedRouterIdTC SYNTAX TedRouterIdTC
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object represents the router ID of the router originating "This object represents the router ID of the router originating
the LSA. If OSPF is used to advertise LSA, this represents a Router the LSA. If OSPF is used to advertise LSA, this represents a Router
ID. If ISIS is used, this represents a System ID. Otherwise, this ID. If ISIS is used, this represents a System ID. Otherwise, this
represents zero." represents zero."
REFERENCE REFERENCE
" OSPF Version 2, [RFC2328], C.1 " OSPF Version 2, RFC2328, C.1
OSPF for IPv6, [RFC5340], C.1 OSPF for IPv6, RFC5340, C.1
[ISO10589], Section 7.1 " ISO10589, Section 7.1 "
::= { tedEntry 2 } ::= { tedEntry 2 }
tedRemoteRouterId OBJECT-TYPE tedRemoteRouterId OBJECT-TYPE
SYNTAX TedRouterIdTC SYNTAX TedRouterIdTC
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the router at the remote end of the link "This object indicates the router at the remote end of the link
from the originating router. If OSPF is used to advertise LSA, this from the originating router. If OSPF is used to advertise LSA, this
represents a Link ID in the Link TLV. If ISIS is used, this represents a Link ID in the Link TLV. If ISIS is used, this
represents a neighbor system ID defined in [RFC5305]. Otherwise, this represents a neighbor system ID defined in RFC5305. Otherwise, this
represents zero." represents zero."
REFERENCE REFERENCE
" OSPF Version 2, [RFC2328], C.1 " OSPF Version 2, RFC2328, C.1
OSPF for IPv6, [RFC5340], C.1 OSPF for IPv6, RFC5340, C.1
[ISO10589], Section 7.1 ISO10589, Section 7.1"
IS-IS extensions for TE [RFC5305], C.3"
::= { tedEntry 3 } ::= { tedEntry 3 }
tedLinkIndex OBJECT-TYPE tedLinkIndex OBJECT-TYPE
SYNTAX TedLinkIndexTC SYNTAX TedLinkIndexTC
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the link state identifier. If OSPF is "This object indicates the link state identifier. If OSPF is
used, this represents an ospfLsdbID. If ISIS is used, this represents used, this represents an ospfLsdbID. If ISIS is used, this represents
an isisLSPID. Otherwise, this represents a unique identifier within a an isisLSPID. Otherwise, this represents a unique identifier within a
node." node."
REFERENCE REFERENCE
"OSPF Version 2, [RFC2328], A.4.1, "OSPF Version 2, RFC2328, A.4.1,
OSPF for IPv6, [RFC5340], A.4.2 OSPF for IPv6, RFC5340, A.4.2
[ISO10589], Section 9.8 " ISO10589, Section 9.8 "
::= { tedEntry 4 } ::= { tedEntry 4 }
tedLinkInformationData OBJECT-TYPE tedLinkInformationData OBJECT-TYPE
SYNTAX RowPointer SYNTAX RowPointer
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object cross-references the source of the information " If tedLinkInformationSource has the value unknown(0), this
about this TE link and should be interpretted in the context of object MUST contain a value of zeroDotZero.
tedLinkInformationSource.
If tedLinkInformationSource has the value unknown(0), this
object SHOULD contain a value of zeroDotZero.
If tedLinkInformationSource has the value If tedLinkInformationSource has the value
locallyConfigured(1), this object MAY contain the identifier of locallyConfigured(1), an implementation can use this object to
the corresponding row entry in the teLinkTable of TE-LINK-STD- supply the identifier of the corresponding row entry in the
MIB[RFC4220], the identifier of the corresponding row in a local teLinkTable of TE-LINK-STD-MIB (RFC 4220), the identifier of the
proprietary TE link MIB module, or the value of zeroDotZero corresponding row in a local proprietary TE link MIB module, or
otherwise. the value of zeroDotZero.
If tedLinkInformationSource has the value ospfv2(2)and If tedLinkInformationSource has the value ospfv2(2)and
ospfv3(3), this object MAY contain the identifier of the ospfv3(3), an implementation can use this object to supply the
corresponding row entry in the ospfLocalLsdbTable of OSPFv2- identifier of the corresponding row entry in the
MIB[RFC4750] and the ospfv3AreaLsdbTable of OSPFv3-MIB[RFC5643], ospfLocalLsdbTable (OSPFv2-MIB) and the ospfv3AreaLsdbTable
or the value of zeroDotZero otherwise. (OSPFv3-MIB), or the value of zeroDotZero.
If tedLinkInformationSource has the value isis(4) this object If tedLinkInformationSource has the value isis(4), an
MAY contain the identifier of the corresponding row entry in the implementation can use this object to supply the identifier of
isisAreaAddr of ISIS-MIB [RFC4444], or the value of zeroDotZero the corresponding row entry in the isisAreaAddr of ISIS-MIB
otherwise. (RFC4444), or the value of zeroDotZero.
If tedLinkInformationSource has the value other(5) this If tedLinkInformationSource has the value other(5), an
object MAY contain the identifier of the corresponding row entry implementation can use this object to supply the identifier of
a local proprietary MIB module, or the value of zeroDotZero the corresponding row entry in the local proprietary MIB module,
otherwise." or the value of zeroDotZero."
::= { tedEntry 5 } ::= { tedEntry 5 }
tedLinkState OBJECT-TYPE tedLinkState OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
unknown (0), unknown (0),
up (1), up (1),
down (2) down (2)
} }
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
skipping to change at page 11, line 34 skipping to change at page 11, line 26
tedAreaId OBJECT-TYPE tedAreaId OBJECT-TYPE
SYNTAX TedAreaIdTC SYNTAX TedAreaIdTC
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the area identifier of the IGP. If OSPF "This object indicates the area identifier of the IGP. If OSPF
is used to advertise LSA, this represents an ospfArea. If ISIS is is used to advertise LSA, this represents an ospfArea. If ISIS is
used, this represents an area address. Otherwise, this represents used, this represents an area address. Otherwise, this represents
zero." zero."
REFERENCE REFERENCE
" OSPF Version 2, [RFC2328], C.2 " OSPF Version 2, RFC2328, C.2
OSPF for IPv6, [RFC5340], C.2 OSPF for IPv6, RFC5340, C.2
[ISO10589], Section 9.8 " ISO10589, Section 9.8 "
::= { tedEntry 7 } ::= { tedEntry 7 }
tedLinkType OBJECT-TYPE tedLinkType OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
pointToPoint (1), pointToPoint (1),
multiAccess (2) multiAccess (2)
} }
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the type of the link such as point-to-point or "This indicates the type of the link such as point-to-point or
multi-access." multi-access."
REFERENCE REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, [RFC " Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
3630], 2.5.1" 3630, 2.5.1"
::= { tedEntry 8 } ::= { tedEntry 8 }
tedRouterIdAddrType OBJECT-TYPE tedTeRouterIdAddrType OBJECT-TYPE
SYNTAX InetAddressType SYNTAX InetAddressType
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object indicates the TE-Router ID address type. Only " This object indicates the TE-Router ID address type. Only
values unknown(0), ipv4(1) or ipv6(2) must be supported. " values unknown(0), ipv4(1) or ipv6(2) are supported. "
::= { tedEntry 9 } ::= { tedEntry 9 }
tedRouterIdAddr OBJECT-TYPE tedTeRouterIdAddr OBJECT-TYPE
SYNTAX InetAddress SYNTAX InetAddress
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the TE-Router ID." "This object indicates the TE-Router ID."
REFERENCE REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, RFC " Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
3630, 2.4.1" 3630, 2.4.1
IS-IS extensions for TE, RFC5305, 4.3"
::= { tedEntry 10 } ::= { tedEntry 10 }
tedLinkIdAddrType OBJECT-TYPE tedLinkIdAddrType OBJECT-TYPE
SYNTAX InetAddressType SYNTAX InetAddressType
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object indicates the address type of the TE Link ID. " This object indicates the address type of the TE Link ID.
Only values unknown(0), ipv4(1) or ipv6(2) must be supported." Only values unknown(0), ipv4(1) or ipv6(2) are supported."
::= { tedEntry 11 } ::= { tedEntry 11 }
tedLinkIdAddr OBJECT-TYPE tedLinkIdAddr OBJECT-TYPE
SYNTAX InetAddress SYNTAX InetAddress
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the Router ID of the neighbor in the case of "This indicates the Router ID of the neighbor in the case of
point-to-point links. This also indicates the interface address of point-to-point links. This also indicates the interface address of
the designated router in the case of multi-access links." the designated router in the case of multi-access links."
REFERENCE REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, [RFC " Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
3630], 2.5.2" 3630, 2.5.2
IS-IS extensions for TE, RFC5305, 4.3"
::= { tedEntry 12 } ::= { tedEntry 12 }
tedMetric OBJECT-TYPE tedMetric OBJECT-TYPE
SYNTAX Integer32 SYNTAX Integer32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the traffic engineering metric value of the TE "This indicates the traffic engineering metric value of the TE
link." link."
REFERENCE REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, [RFC " Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
3630], 2.5.5" 3630, 2.5.5
IS-IS extensions for TE, RFC5305, 3.7"
::= { tedEntry 13 } ::= { tedEntry 13 }
tedMaxBandwidth OBJECT-TYPE tedMaxBandwidth OBJECT-TYPE
SYNTAX Float32TC SYNTAX Float32TC
UNITS "Byte per second" UNITS "Byte per second"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the maximum bandwidth that can be used on this "This indicates the maximum bandwidth that can be used on this
link in this direction." link in this direction."
REFERENCE REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, [RFC " Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
3630], 2.5.6" 3630, 2.5.6
IS-IS extensions for TE, RFC5305, 3.4"
::= { tedEntry 14 } ::= { tedEntry 14 }
tedMaxReservableBandwidth OBJECT-TYPE tedMaxReservableBandwidth OBJECT-TYPE
SYNTAX Float32TC SYNTAX Float32TC
UNITS "Byte per second" UNITS "Byte per second"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the maximum bandwidth that may be reserved on "This indicates the maximum bandwidth that may be reserved on
this link in this direction." this link in this direction."
REFERENCE REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, [RFC " Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
3630], 2.5.7" 3630, 2.5.7
IS-IS extensions for TE, RFC5305, 3.5"
::= { tedEntry 15 } ::= { tedEntry 15 }
tedUnreservedBandwidthPri0 OBJECT-TYPE tedUnreservedBandwidthPri0 OBJECT-TYPE
SYNTAX Float32TC SYNTAX Float32TC
UNITS "Byte per second" UNITS "Byte per second"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the amount of bandwidth not yet reserved at the "This indicates the amount of bandwidth not yet reserved at the
priority 0." priority 0."
REFERENCE REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, [RFC " Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
3630], 2.5.8" 3630, 2.5.8
IS-IS extensions for TE, RFC5305, 3.6"
::= { tedEntry 16 } ::= { tedEntry 16 }
tedUnreservedBandwidthPri1 OBJECT-TYPE tedUnreservedBandwidthPri1 OBJECT-TYPE
SYNTAX Float32TC SYNTAX Float32TC
UNITS "Byte per second" UNITS "Byte per second"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the amount of bandwidth not yet reserved at the "This indicates the amount of bandwidth not yet reserved at the
priority 1." priority 1."
REFERENCE REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, [RFC " Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
3630], 2.5.8" 3630, 2.5.8
IS-IS extensions for TE, RFC5305, 3.6"
::= { tedEntry 17 } ::= { tedEntry 17 }
tedUnreservedBandwidthPri2 OBJECT-TYPE tedUnreservedBandwidthPri2 OBJECT-TYPE
SYNTAX Float32TC SYNTAX Float32TC
UNITS "Byte per second" UNITS "Byte per second"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the amount of bandwidth not yet reserved at the "This indicates the amount of bandwidth not yet reserved at the
priority 2." priority 2."
REFERENCE REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, [RFC " Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
3630], 2.5.8" 3630, 2.5.8
IS-IS extensions for TE, RFC5305, 3.6"
::= { tedEntry 18 } ::= { tedEntry 18 }
tedUnreservedBandwidthPri3 OBJECT-TYPE tedUnreservedBandwidthPri3 OBJECT-TYPE
SYNTAX Float32TC SYNTAX Float32TC
UNITS "Byte per second" UNITS "Byte per second"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the amount of bandwidth not yet reserved at the "This indicates the amount of bandwidth not yet reserved at the
priority 3." priority 3."
REFERENCE REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, [RFC " Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
3630], 2.5.8" 3630, 2.5.8
IS-IS extensions for TE, RFC5305, 3.6"
::= { tedEntry 19 } ::= { tedEntry 19 }
tedUnreservedBandwidthPri4 OBJECT-TYPE tedUnreservedBandwidthPri4 OBJECT-TYPE
SYNTAX Float32TC SYNTAX Float32TC
UNITS "Byte per second" UNITS "Byte per second"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the amount of bandwidth not yet reserved at the "This indicates the amount of bandwidth not yet reserved at the
priority 4." priority 4."
REFERENCE REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, [RFC " Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
3630], 2.5.8" 3630, 2.5.8
IS-IS extensions for TE, RFC5305, 3.6"
::= { tedEntry 20 } ::= { tedEntry 20 }
tedUnreservedBandwidthPri5 OBJECT-TYPE tedUnreservedBandwidthPri5 OBJECT-TYPE
SYNTAX Float32TC SYNTAX Float32TC
UNITS "Byte per second" UNITS "Byte per second"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the amount of bandwidth not yet reserved at the "This indicates the amount of bandwidth not yet reserved at the
priority 5." priority 5."
REFERENCE REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, [RFC " Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
3630], 2.5.8" 3630, 2.5.8
IS-IS extensions for TE, RFC5305, 3.6"
::= { tedEntry 21 } ::= { tedEntry 21 }
tedUnreservedBandwidthPri6 OBJECT-TYPE tedUnreservedBandwidthPri6 OBJECT-TYPE
SYNTAX Float32TC SYNTAX Float32TC
UNITS "Byte per second" UNITS "Byte per second"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the amount of bandwidth not yet reserved at the "This indicates the amount of bandwidth not yet reserved at the
priority 6." priority 6."
REFERENCE REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, [RFC " Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
3630], 2.5.8" 3630, 2.5.8
IS-IS extensions for TE, RFC5305, 3.6"
::= { tedEntry 22 } ::= { tedEntry 22 }
tedUnreservedBandwidthPri7 OBJECT-TYPE tedUnreservedBandwidthPri7 OBJECT-TYPE
SYNTAX Float32TC SYNTAX Float32TC
UNITS "Byte per second" UNITS "Byte per second"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the amount of bandwidth not yet reserved at the "This indicates the amount of bandwidth not yet reserved at the
priority 7." priority 7."
REFERENCE REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, [RFC " Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
3630], 2.5.8" 3630, 2.5.8
IS-IS extensions for TE, RFC5305, 3.6"
::= { tedEntry 23 } ::= { tedEntry 23 }
tedAdministrativeGroup OBJECT-TYPE tedAdministrativeGroup OBJECT-TYPE
SYNTAX Integer32 SYNTAX Integer32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the Administrative Group which the link belong "This indicates the Administrative Group which the link belong
to. Since the value is a bit mask, the link can belong to multiple to. Since the value is a bit mask, the link can belong to multiple
groups. This is also called Resource Class/Color." groups. This is also called Resource Class/Color."
REFERENCE REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, [RFC " Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
3630], 2.5.9" 3630, 2.5.9
IS-IS extensions for TE, RFC5305, 3.1"
::= { tedEntry 24 } ::= { tedEntry 24 }
tedLocalId OBJECT-TYPE tedLocalId OBJECT-TYPE
SYNTAX Integer32 SYNTAX Integer32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the Link local identifier of an unnumbered "This indicates the Link local identifier of an unnumbered
link." link."
REFERENCE REFERENCE
" OSPF Extensions in Support of GMPLS, [RFC4203], 1.1" " OSPF Extensions in Support of GMPLS, RFC4203, 1.1
IS-IS Extensions in Support of GMPLS, RFC5307, 1.1"
::= { tedEntry 25 } ::= { tedEntry 25 }
tedRemoteId OBJECT-TYPE tedRemoteId OBJECT-TYPE
SYNTAX Integer32 SYNTAX Integer32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the Link remote identifier of an unnumbered "This indicates the Link remote identifier of an unnumbered
link." link."
REFERENCE REFERENCE
" OSPF Extensions in Support of GMPLS, [RFC4203], 1.1" " OSPF Extensions in Support of GMPLS, RFC4203, 1.1
IS-IS Extensions in Support of GMPLS, RFC5307, 1.1"
::= { tedEntry 26 } ::= { tedEntry 26 }
tedLinkProtectionType OBJECT-TYPE tedLinkProtectionType OBJECT-TYPE
SYNTAX BITS { SYNTAX BITS {
extraTraffic(0), extraTraffic(0),
unprotected(1), unprotected(1),
shared (2), shared (2),
dedicatedOneToOne (3), dedicatedOneToOne (3),
dedicatedOnePlusOne(4), dedicatedOnePlusOne(4),
enhanced(5) enhanced(5)
} }
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the protection type of the TE link." "This object indicates the protection type of the TE link."
REFERENCE REFERENCE
" OSPF Extensions in Support of GMPLS, [RFC4203], 1.2" " OSPF Extensions in Support of GMPLS, RFC4203, 1.2
IS-IS Extensions in Support of GMPLS, RFC5307, 1.2"
::= { tedEntry 27 } ::= { tedEntry 27 }
-- --
-- TED Local Interface IP Address Table -- TED Local Interface IP Address Table
-- --
tedLocalIfAddrTable OBJECT-TYPE tedLocalIfAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF TedLocalIfAddrEntry SYNTAX SEQUENCE OF TedLocalIfAddrEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
skipping to change at page 17, line 4 skipping to change at page 17, line 13
} }
tedLocalIfAddrType OBJECT-TYPE tedLocalIfAddrType OBJECT-TYPE
SYNTAX InetAddressType SYNTAX InetAddressType
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the address type of the local TE link. "This object indicates the address type of the local TE link.
Only values unknown(0), ipv4(1) or ipv6(2) have to be supported." Only values unknown(0), ipv4(1) or ipv6(2) have to be supported."
::= { tedLocalIfAddrEntry 1 } ::= { tedLocalIfAddrEntry 1 }
tedLocalIfAddr OBJECT-TYPE tedLocalIfAddr OBJECT-TYPE
SYNTAX InetAddress SYNTAX InetAddress (SIZE (1..20))
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the address of the local TE link." "This object indicates the address of the local TE link."
REFERENCE REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, [RFC " Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
3630], 2.5.3, 3630, 2.5.3,
Traffic Engineering Extensions to OSPF Version3, RFC5329, Traffic Engineering Extensions to OSPF Version3, RFC5329, 4.3
4.3" IS-IS extensions for TE, RFC5305, 3.4 "
::= { tedLocalIfAddrEntry 2 } ::= { tedLocalIfAddrEntry 2 }
-- --
-- TED Remote Interface IP Address Table -- TED Remote Interface IP Address Table
-- --
tedRemoteIfAddrTable OBJECT-TYPE tedRemoteIfAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF TedRemoteIfAddrEntry SYNTAX SEQUENCE OF TedRemoteIfAddrEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
skipping to change at page 17, line 54 skipping to change at page 18, line 11
tedRemoteIfAddrType OBJECT-TYPE tedRemoteIfAddrType OBJECT-TYPE
SYNTAX InetAddressType SYNTAX InetAddressType
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the address type of the remote TE link." "This object indicates the address type of the remote TE link."
::= { tedRemoteIfAddrEntry 1 } ::= { tedRemoteIfAddrEntry 1 }
tedRemoteIfAddr OBJECT-TYPE tedRemoteIfAddr OBJECT-TYPE
SYNTAX InetAddress SYNTAX InetAddress(SIZE (1..20))
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the address of the remote TE link." "This object indicates the address of the remote TE link."
REFERENCE REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, [RFC " Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
3630], 2.5.4, 3630, 2.5.4,
Traffic Engineering Extensions to OSPF Version3, [RFC5329], Traffic Engineering Extensions to OSPF Version3, RFC5329, 4.4
4.4" IS-IS extensions for TE, RFC5305, 3.3 "
::= { tedRemoteIfAddrEntry 2 } ::= { tedRemoteIfAddrEntry 2 }
-- --
-- TED Switching Capability Table -- TED Switching Capability Table
-- --
tedSwCapTable OBJECT-TYPE tedSwCapTable OBJECT-TYPE
SYNTAX SEQUENCE OF TedSwCapEntry SYNTAX SEQUENCE OF TedSwCapEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
skipping to change at page 18, line 32 skipping to change at page 18, line 42
"This table contains the GMPLS TED switching capability "This table contains the GMPLS TED switching capability
information." information."
::= { tedObjects 4 } ::= { tedObjects 4 }
tedSwCapEntry OBJECT-TYPE tedSwCapEntry OBJECT-TYPE
SYNTAX TedSwCapEntry SYNTAX TedSwCapEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This entry relates each TE link with its GMPLS TE switching "This entry relates each TE link with its GMPLS TE switching
capability information. IF the MIB deals with only OSPF-TE capability information. If the MIB module deals with only OSPF-TE
information, the value of each object related with GMPLS TE information, the value of each object related with GMPLS TE
extensions should be null." extensions should be null."
INDEX { tedLinkIndex, tedSwCapIndex } INDEX { tedLinkIndex, tedSwCapIndex }
::= { tedSwCapTable 1 } ::= { tedSwCapTable 1 }
TedSwCapEntry ::= SEQUENCE { TedSwCapEntry ::= SEQUENCE {
tedSwCapIndex Unsigned32, tedSwCapIndex Unsigned32,
tedSwCapType IANAGmplsSwitchingTypeTC, tedSwCapType IANAGmplsSwitchingTypeTC,
tedSwCapEncoding IANAGmplsLSPEncodingTypeTC, tedSwCapEncoding IANAGmplsLSPEncodingTypeTC,
tedSwCapMaxLspBandwidthPri0 Float32TC, tedSwCapMaxLspBandwidthPri0 Float32TC,
skipping to change at page 19, line 8 skipping to change at page 19, line 18
tedSwCapIndication INTEGER tedSwCapIndication INTEGER
} }
tedSwCapIndex OBJECT-TYPE tedSwCapIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..255) SYNTAX Unsigned32 (1..255)
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This index is utilized to identify multiple switching "This index is utilized to identify multiple switching
functions on a local or remote TE link according to definitions of functions on a local or remote TE link according to definitions of
textual conventions of GMPLS [RFC4801]." textual conventions of GMPLS, RFC4801."
::= { tedSwCapEntry 1 } ::= { tedSwCapEntry 1 }
tedSwCapType OBJECT-TYPE tedSwCapType OBJECT-TYPE
SYNTAX IANAGmplsSwitchingTypeTC SYNTAX IANAGmplsSwitchingTypeTC
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the GMPLS switching capability assigned "This object indicates the GMPLS switching capability assigned
to the TE link according to definitions of textual conventions of to the TE link according to definitions of textual conventions of
GMPLS [RFC4801]." GMPLS, RFC4801."
REFERENCE REFERENCE
" OSPF Extensions in Support of GMPLS, [RFC4203], 1.4" " OSPF Extensions in Support of GMPLS, RFC4203, 1.4
IS-IS Extensions in Support of GMPLS, RFC5307, 1.3 "
::= { tedSwCapEntry 2 } ::= { tedSwCapEntry 2 }
tedSwCapEncoding OBJECT-TYPE tedSwCapEncoding OBJECT-TYPE
SYNTAX IANAGmplsLSPEncodingTypeTC SYNTAX IANAGmplsLSPEncodingTypeTC
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the GMPLS encoding type assigned to the "This object indicates the GMPLS encoding type assigned to the
TE link." TE link."
REFERENCE REFERENCE
" OSPF Extensions in Support of GMPLS, [RFC4203], 1.4" " OSPF Extensions in Support of GMPLS, RFC4203, 1.4
IS-IS Extensions in Support of GMPLS, RFC5307, 1.3 "
::= { tedSwCapEntry 3 } ::= { tedSwCapEntry 3 }
tedSwCapMaxLspBandwidthPri0 OBJECT-TYPE tedSwCapMaxLspBandwidthPri0 OBJECT-TYPE
SYNTAX Float32TC SYNTAX Float32TC
UNITS "Byte per second" UNITS "Byte per second"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the maximum bandwidth of the TE link at "This object indicates the maximum bandwidth of the TE link at
the priority 0 for GMPLS LSP creation." the priority 0 for GMPLS LSP creation."
REFERENCE REFERENCE
" OSPF Extensions in Support of GMPLS, [RFC4203], 1.4" " OSPF Extensions in Support of GMPLS, RFC4203, 1.4
IS-IS Extensions in Support of GMPLS, RFC5307, 1.3"
::= { tedSwCapEntry 4 } ::= { tedSwCapEntry 4 }
tedSwCapMaxLspBandwidthPri1 OBJECT-TYPE tedSwCapMaxLspBandwidthPri1 OBJECT-TYPE
SYNTAX Float32TC SYNTAX Float32TC
UNITS "Byte per second" UNITS "Byte per second"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the maximum bandwidth of the TE link at "This object indicates the maximum bandwidth of the TE link at
the priority 1 for GMPLS LSP creation." the priority 1 for GMPLS LSP creation."
REFERENCE REFERENCE
" OSPF Extensions in Support of GMPLS, [RFC4203], 1.4" " OSPF Extensions in Support of GMPLS, RFC4203, 1.4
IS-IS Extensions in Support of GMPLS, RFC5307, 1.3 "
::= { tedSwCapEntry 5 } ::= { tedSwCapEntry 5 }
tedSwCapMaxLspBandwidthPri2 OBJECT-TYPE tedSwCapMaxLspBandwidthPri2 OBJECT-TYPE
SYNTAX Float32TC SYNTAX Float32TC
UNITS "Byte per second" UNITS "Byte per second"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the maximum bandwidth of the TE link at "This object indicates the maximum bandwidth of the TE link at
the priority 2 for GMPLS LSP creation." the priority 2 for GMPLS LSP creation."
REFERENCE REFERENCE
" OSPF Extensions in Support of GMPLS, [RFC4203], 1.4" " OSPF Extensions in Support of GMPLS, RFC4203, 1.4
IS-IS Extensions in Support of GMPLS, RFC5307, 1.3 "
::= { tedSwCapEntry 6 } ::= { tedSwCapEntry 6 }
tedSwCapMaxLspBandwidthPri3 OBJECT-TYPE tedSwCapMaxLspBandwidthPri3 OBJECT-TYPE
SYNTAX Float32TC SYNTAX Float32TC
UNITS "Byte per second" UNITS "Byte per second"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the maximum bandwidth of the TE link at "This object indicates the maximum bandwidth of the TE link at
the priority 3 for GMPLS LSP creation." the priority 3 for GMPLS LSP creation."
REFERENCE REFERENCE
" OSPF Extensions in Support of GMPLS, [RFC4203], 1.4" " OSPF Extensions in Support of GMPLS, RFC4203, 1.4
IS-IS Extensions in Support of GMPLS, RFC5307, 1.3 "
::= { tedSwCapEntry 7 } ::= { tedSwCapEntry 7 }
tedSwCapMaxLspBandwidthPri4 OBJECT-TYPE tedSwCapMaxLspBandwidthPri4 OBJECT-TYPE
SYNTAX Float32TC SYNTAX Float32TC
UNITS "Byte per second" UNITS "Byte per second"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the maximum bandwidth of the TE link at "This object indicates the maximum bandwidth of the TE link at
the priority 4 for GMPLS LSP creation." the priority 4 for GMPLS LSP creation."
REFERENCE REFERENCE
" OSPF Extensions in Support of GMPLS, [RFC4203], 1.4" " OSPF Extensions in Support of GMPLS, RFC4203, 1.4
IS-IS Extensions in Support of GMPLS, RFC5307, 1.3 "
::= { tedSwCapEntry 8 } ::= { tedSwCapEntry 8 }
tedSwCapMaxLspBandwidthPri5 OBJECT-TYPE tedSwCapMaxLspBandwidthPri5 OBJECT-TYPE
SYNTAX Float32TC SYNTAX Float32TC
UNITS "Byte per second" UNITS "Byte per second"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the maximum bandwidth of the TE link at "This object indicates the maximum bandwidth of the TE link at
the priority 5 for GMPLS LSP creation." the priority 5 for GMPLS LSP creation."
REFERENCE REFERENCE
" OSPF Extensions in Support of GMPLS, [RFC4203], 1.4" " OSPF Extensions in Support of GMPLS, RFC4203, 1.4
IS-IS Extensions in Support of GMPLS, RFC5307, 1.3 "
::= { tedSwCapEntry 9 } ::= { tedSwCapEntry 9 }
tedSwCapMaxLspBandwidthPri6 OBJECT-TYPE tedSwCapMaxLspBandwidthPri6 OBJECT-TYPE
SYNTAX Float32TC SYNTAX Float32TC
UNITS "Byte per second" UNITS "Byte per second"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the maximum bandwidth of the TE link at "This object indicates the maximum bandwidth of the TE link at
the priority 6 for GMPLS LSP creation." the priority 6 for GMPLS LSP creation."
REFERENCE REFERENCE
" OSPF Extensions in Support of GMPLS, [RFC4203], 1.4" " OSPF Extensions in Support of GMPLS, RFC4203, 1.4
IS-IS Extensions in Support of GMPLS, RFC5307, 1.3 "
::= { tedSwCapEntry 10 } ::= { tedSwCapEntry 10 }
tedSwCapMaxLspBandwidthPri7 OBJECT-TYPE tedSwCapMaxLspBandwidthPri7 OBJECT-TYPE
SYNTAX Float32TC SYNTAX Float32TC
UNITS "Byte per second" UNITS "Byte per second"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the maximum bandwidth of the TE link at "This object indicates the maximum bandwidth of the TE link at
the priority 7 for GMPLS LSP creation." the priority 7 for GMPLS LSP creation."
REFERENCE REFERENCE
" OSPF Extensions in Support of GMPLS, [RFC4203], 1.4" " OSPF Extensions in Support of GMPLS, RFC4203, 1.4
IS-IS Extensions in Support of GMPLS, RFC5307, 1.3 "
::= { tedSwCapEntry 11 } ::= { tedSwCapEntry 11 }
tedSwCapMinLspBandwidth OBJECT-TYPE tedSwCapMinLspBandwidth OBJECT-TYPE
SYNTAX Float32TC SYNTAX Float32TC
UNITS "Byte per second" UNITS "Byte per second"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the minimum bandwidth of the TE link for "This object indicates the minimum bandwidth of the TE link for
GMPLS LSP creation if the switching capability field is TDM, PSC-1, GMPLS LSP creation if the switching capability field is TDM, PSC-1,
PSC-2, PSC-3, or PSC-4." PSC-2, PSC-3, or PSC-4."
REFERENCE REFERENCE
" OSPF Extensions in Support of GMPLS, [RFC4203], 1.4" " OSPF Extensions in Support of GMPLS, RFC4203, 1.4
IS-IS Extensions in Support of GMPLS, RFC5307, 1.3 "
::= { tedSwCapEntry 12 } ::= { tedSwCapEntry 12 }
tedSwCapIfMtu OBJECT-TYPE tedSwCapIfMtu OBJECT-TYPE
SYNTAX Integer32 SYNTAX Integer32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the MTU of the local or remote TE link." "This object indicates the MTU of the local or remote TE link."
REFERENCE REFERENCE
" OSPF Extensions in Support of GMPLS, [RFC4203], 1.4" " OSPF Extensions in Support of GMPLS, RFC4203, 1.4
IS-IS Extensions in Support of GMPLS, RFC5307, 1.3 "
::= { tedSwCapEntry 13 } ::= { tedSwCapEntry 13 }
tedSwCapIndication OBJECT-TYPE tedSwCapIndication OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
standard (0), standard (0),
arbitrary (1) arbitrary (1)
} }
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates whether the interface supports Standard "This object indicates whether the interface supports Standard
or Arbitrary SONET SDH." or Arbitrary SONET SDH."
REFERENCE REFERENCE
" OSPF Extensions in Support of GMPLS, [RFC4203], 1.4" " OSPF Extensions in Support of GMPLS, RFC4203, 1.4
IS-IS Extensions in Support of GMPLS, RFC5307, 1.3 "
::= { tedSwCapEntry 14 } ::= { tedSwCapEntry 14 }
-- --
-- TED SRLG Table -- TED SRLG Table
-- --
tedSrlgTable OBJECT-TYPE tedSrlgTable OBJECT-TYPE
SYNTAX SEQUENCE OF TedSrlgEntry SYNTAX SEQUENCE OF TedSrlgEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table contains the SRLG information of the TE link." "This table contains the SRLG information of the TE link."
skipping to change at page 22, line 39 skipping to change at page 23, line 9
tedSrlgIndex OBJECT-TYPE tedSrlgIndex OBJECT-TYPE
SYNTAX Unsigned32(1..255) SYNTAX Unsigned32(1..255)
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This index is utilized to identify multiple SRLG values on a " This index is utilized to identify multiple SRLG values on a
local or remote TE link. This object represents an arbitrary value local or remote TE link. This object represents an arbitrary value
which is locally defined in a router." which is locally defined in a router."
REFERENCE REFERENCE
" OSPF Extensions in support of GMPLS, [RFC4203], 1.3 " " OSPF Extensions in support of GMPLS, RFC4203, 1.3
IS-IS Extensions in Support of GMPLS, RFC5307, 1.4 "
::= { tedSrlgEntry 1 } ::= { tedSrlgEntry 1 }
tedSrlg OBJECT-TYPE tedSrlg OBJECT-TYPE
SYNTAX Integer32 SYNTAX Integer32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicate the SRLG value assigned to a local or "This object indicate the SRLG value assigned to a local or
remote TE link" remote TE link"
REFERENCE REFERENCE
" OSPF Extensions in Support of GMPLS, [RFC4203], 1.3" " OSPF Extensions in Support of GMPLS, RFC4203, 1.3
IS-IS Extensions in Support of GMPLS, RFC5307, 1.4 "
::= { tedSrlgEntry 2 } ::= { tedSrlgEntry 2 }
-- --
-- Notification Configuration -- Notification Configuration
-- --
tedStatusChangeNotificationMaxRate OBJECT-TYPE tedStatusChangeNotificationMaxRate OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A lot of notifications relating to the status change are "A lot of notifications relating to the status change are
expected to generate in a node, especially when a network failure expected to generate in a node, especially when a network failure
occurs and might cause a performance degradation of the node itself. occurs and might cause a performance degradation of the node itself.
To avoid such a defect, this object provides the maximum number of To avoid such a defect, this object provides the maximum number of
notifications generated per minute. If events occur more rapidly, notifications generated per minute. If events occur more rapidly,
skipping to change at page 23, line 18 skipping to change at page 23, line 43
DESCRIPTION DESCRIPTION
"A lot of notifications relating to the status change are "A lot of notifications relating to the status change are
expected to generate in a node, especially when a network failure expected to generate in a node, especially when a network failure
occurs and might cause a performance degradation of the node itself. occurs and might cause a performance degradation of the node itself.
To avoid such a defect, this object provides the maximum number of To avoid such a defect, this object provides the maximum number of
notifications generated per minute. If events occur more rapidly, notifications generated per minute. If events occur more rapidly,
the implementation may simply fail to emit these notifications during the implementation may simply fail to emit these notifications during
that period, or may queue them until an appropriate time. A value of that period, or may queue them until an appropriate time. A value of
0 means no throttling is applied and events may be notified at the 0 means no throttling is applied and events may be notified at the
rate at which they occur." rate at which they occur."
DEFVAL {0} DEFVAL {1}
::= { tedObjects 6 } ::= { tedObjects 6 }
tedCreatedDeletedNotificationMaxRate OBJECT-TYPE tedCreatedDeletedNotificationMaxRate OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A lot of notifications relating to new registration in ted "A lot of notifications relating to new registration in ted
table by receiving new TE link information or deletion of existing table by receiving new TE link information or deletion of existing
entries in ted table are expected to generate in a node. This object entries in ted table are expected to generate in a node. This object
provides the maximum number of notifications generated per minute. " provides the maximum number of notifications generated per minute. "
DEFVAL {0} DEFVAL {1}
::= { tedObjects 7 } ::= { tedObjects 7 }
-- --
-- Notifications -- Notifications
-- --
tedStatusChange NOTIFICATION-TYPE tedStatusChange NOTIFICATION-TYPE
OBJECTS { OBJECTS {
tedLinkState tedLinkState
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
skipping to change at page 26, line 26 skipping to change at page 26, line 51
::= { tedCompliances 2 } ::= { tedCompliances 2 }
-- Units of conformance -- Units of conformance
tedMainGroup OBJECT-GROUP tedMainGroup OBJECT-GROUP
OBJECTS { OBJECTS {
tedLinkState , tedLinkState ,
tedAreaId , tedAreaId ,
tedLinkType , tedLinkType ,
tedRouterIdAddrType , tedTeRouterIdAddrType ,
tedRouterIdAddr , tedTeRouterIdAddr ,
tedLinkIdAddrType , tedLinkIdAddrType ,
tedLinkIdAddr , tedLinkIdAddr ,
tedMetric , tedMetric ,
tedMaxBandwidth , tedMaxBandwidth ,
tedMaxReservableBandwidth , tedMaxReservableBandwidth ,
tedUnreservedBandwidthPri0 , tedUnreservedBandwidthPri0 ,
tedUnreservedBandwidthPri1 , tedUnreservedBandwidthPri1 ,
tedUnreservedBandwidthPri2 , tedUnreservedBandwidthPri2 ,
tedUnreservedBandwidthPri3 , tedUnreservedBandwidthPri3 ,
tedUnreservedBandwidthPri4 , tedUnreservedBandwidthPri4 ,
skipping to change at page 29, line 6 skipping to change at page 29, line 30
considered sensitive or vulnerable in some network environments. The considered sensitive or vulnerable in some network environments. The
support for SET operations in a non-secure environment without proper support for SET operations in a non-secure environment without proper
protection can have a negative effect on network operations. protection can have a negative effect on network operations.
Some of the readable objects in this MIB module (i.e., objects with a Some of the readable objects in this MIB module (i.e., objects with a
MAX-ACCESS other than not-accessible) may be considered sensitive or MAX-ACCESS other than not-accessible) may be considered sensitive or
vulnerable in some network environments. It is thus important to vulnerable in some network environments. It is thus important to
control even GET and/or NOTIFY access to these objects and possibly control even GET and/or NOTIFY access to these objects and possibly
to even encrypt the values of these objects when sending them over to even encrypt the values of these objects when sending them over
the network via SNMP. These are the tables and objects and their the network via SNMP. These are the tables and objects and their
sensitivity/vulnerability: sensitivity/vulnerability: tedTable, tedLocalIfAddrTable,
tedRemoteIfAddrTable, tedSwCapTable and tedSrlgTable contain topology
information for the MPLS/GMPLS network. If an administrator does not
want to reveal this information, then these tables should be
considered sensitive/vulnerable.
tedTable, tedLocalIfAddrTable, tedRemoteIfAddrTable, tedSwCapTable There are only two write-access objects in this MIB module:
and tedSrlgTable contain topology information for the MPLS/GMPLS tedStatusChangeNotificationMaxRate and
network. If an administrator does not want to reveal this tedCreatedDeletedNotificationMaxRate. Malicious modification of
information, then these tables should be considered these objects could cause the management agent, the network, or the
sensitive/vulnerable. router to become overloaded with Notifications in cases of high churn
within the network.
SNMP versions prior to SNMPv3 did not include adequate security. Even SNMP versions prior to SNMPv3 did not include adequate security. Even
if the network itself is secure (for example by using IPsec), even if the network itself is secure (for example by using IPsec), even
then, there is no control as to who on the secure network is allowed then, there is no control as to who on the secure network is allowed
to access and GET/SET (read/change/create/delete) the objects in this to access and GET/SET (read/change/create/delete) the objects in this
MIB module. MIB module.
It is RECOMMENDED that implementers consider the security features as It is RECOMMENDED that implementers consider the security features as
provided by the SNMPv3 framework (see [RFC3410], section 8), provided by the SNMPv3 framework (see [RFC3410], section 8),
including full supports for the SNMPv3 cryptographic mechanisms (for including full supports for the SNMPv3 cryptographic mechanisms (for
skipping to change at page 30, line 26 skipping to change at page 31, line 5
[RFC3630] D. Katz, et al, "Traffic Engineering (TE) Extensions to [RFC3630] D. Katz, et al, "Traffic Engineering (TE) Extensions to
OSPF Version2", RFC3630, Sep. 2003. OSPF Version2", RFC3630, Sep. 2003.
[RFC4203] K. Kompella, and Y. Rekhter, "OSPF Extensions in Support [RFC4203] K. Kompella, and Y. Rekhter, "OSPF Extensions in Support
of Generalized Multi-Protocol Label Switching", RFC4203, of Generalized Multi-Protocol Label Switching", RFC4203,
Oct. 2005. Oct. 2005.
[RFC4750] Dan Joyal, et al, "OSPF Version 2 Management Information [RFC4750] Dan Joyal, et al, "OSPF Version 2 Management Information
Base", RFC4750, Dec. 2006. Base", RFC4750, Dec. 2006.
[RFC4801] T. Nadeau and A. Farrel, Ed., "Definitions of Textual [RFC4801] T. D. Nadeau and A. Farrel, Ed., "Definitions of Textual
Conventions for Generalized Multiprotocol Label Switching Conventions for Generalized Multiprotocol Label Switching
(GMPLS) Management", RFC4801, Feb. 2007. (GMPLS) Management", RFC4801, Feb. 2007.
[RFC5329] K. Ishiguro, V. Manral, A. Davey, A.Lindem " Traffic [RFC5329] K. Ishiguro, V. Manral, A. Davey, A.Lindem " Traffic
Engineering Extensions to OSPF Version 3 ", RFC5329, Sep. Engineering Extensions to OSPF Version 3 ", RFC5329, Sep.
2008. 2008.
[RFC5340] R. Coltun, D. Ferguson, J. Moy, A.Lindem " OSPF for IPv6", [RFC5340] R. Coltun, D. Ferguson, J. Moy, A.Lindem " OSPF for IPv6",
RFC5340, July 2008. RFC5340, July 2008.
skipping to change at page 30, line 55 skipping to change at page 31, line 34
conjunction with the Protocol for providing the conjunction with the Protocol for providing the
Connectionless-mode Network Service (ISO 8473)", ISO/IEC Connectionless-mode Network Service (ISO 8473)", ISO/IEC
10589:2002. 10589:2002.
10.2 Informative References 10.2 Informative References
[RFC3410] J. Case, R. Mundy, D. pertain, B.Stewart, "Introduction [RFC3410] J. Case, R. Mundy, D. pertain, B.Stewart, "Introduction
and Applicability Statement for Internet Standard and Applicability Statement for Internet Standard
Management Framework", RFC 3410, Dec. 2002. Management Framework", RFC 3410, Dec. 2002.
[RFC3812] Srinivasan, C., Viswanathan, A., and T. Nadeau, [RFC3812] Srinivasan, C., Viswanathan, A., and T. D. Nadeau,
"Multiprotocol Label Switching (MPLS) Traffic Engineering "Multiprotocol Label Switching (MPLS) Traffic Engineering
(TE) Management Information Base (MIB)", RFC 3812, June (TE) Management Information Base (MIB)", RFC 3812, June
2004. 2004.
[RFC3813] Srinivasan, C., Viswanathan, A., and T. Nadeau, [RFC3813] Srinivasan, C., Viswanathan, A., and T. D. Nadeau,
"Multiprotocol Label Switching (MPLS) Label Switching "Multiprotocol Label Switching (MPLS) Label Switching
(LSR) Router Management Information Base (MIB)", RFC 3813, (LSR) Router Management Information Base (MIB)", RFC 3813,
June 2004. June 2004.
[RFC3945] E. Mannie, "Generalized Multi-Procol Label Switching [RFC3945] E. Mannie, "Generalized Multi-Procol Label Switching
(MPLS) Architecture", RFC3945, Oct. 2004. (MPLS) Architecture", RFC3945, Oct. 2004.
[RFC4202] K. Kompella, and Y. Rekhter, "Routing Extensions in [RFC4202] K. Kompella, and Y. Rekhter, "Routing Extensions in
Support of Generalized Multi-Protocol Label Switching", Support of Generalized Multi-Protocol Label Switching",
RFC4202, Oct. 2005. RFC4202, Oct. 2005.
[RFC4220] M. Dubuc, T. D. Nadeu and J. Lang, " Traffic Engineering [RFC4220] M. Dubuc, T. D. Nadeau and J. Lang, " Traffic Engineering
Link Management Information Base ", RFC4220, Dec. 2005. Link Management Information Base ", RFC4220, Dec. 2005.
[RFC4377] T. Nadeau, et al, "Operations and Management (OAM) [RFC4377] T. D. Nadeau, et al, "Operations and Management (OAM)
Requirements for Multi-Protocol Label Switched (MPLS) Requirements for Multi-Protocol Label Switched (MPLS)
Networks", RFC 4377, February 2006. Networks", RFC 4377, February 2006.
[RFC4444] T. Parker, et al, "Management Information Base for [RFC4444] T. Parker, et al, "Management Information Base for
Intermediate System to Intermediate System (IS-IS)", RFC Intermediate System to Intermediate System (IS-IS)", RFC
4444, April 2006. 4444, April 2006.
[RFC4802] T. D. Nadeu and A. Farrel, "Generalized Multiprotocol [RFC4802] T. D. Nadeau and A. Farrel, "Generalized Multiprotocol
Label Switching (GMPLS) Traffic Engineering Management Label Switching (GMPLS) Traffic Engineering Management
Information Base", RFC4802, Feb. 2007. Information Base", RFC4802, Feb. 2007.
[RFC4803] T. D. Nadeu and A. Farrel, "Generalized Multiprotocol [RFC4803] T. D. Nadeau and A. Farrel, "Generalized Multiprotocol
Label Switching (GMPLS) Label Switching Router (LSR) Label Switching (GMPLS) Label Switching Router (LSR)
Management Information Base", RFC4803, Feb., 2007. Management Information Base", RFC4803, Feb., 2007.
[RFC5305] H. Smit and T. Li, "IS-IS extensions for Traffic [RFC5305] H. Smit and T. Li, "IS-IS extensions for Traffic
Engineering", RFC 5305, Oct. 2008. Engineering", RFC 5305, Oct. 2008.
[RFC5307] K. Kompella, and Y. Rekhter, "IS-IS Extensions in Support [RFC5307] K. Kompella, and Y. Rekhter, "IS-IS Extensions in Support
of Generalized Multi-Protocol Label Switching (GMPLS)", of Generalized Multi-Protocol Label Switching (GMPLS)",
RFC5307, Oct. 2008. RFC5307, Oct. 2008.
 End of changes. 91 change blocks. 
177 lines changed or deleted 205 lines changed or added

This html diff was produced by rfcdiff 1.41. The latest version is available from http://tools.ietf.org/tools/rfcdiff/