draft-ietf-ccamp-gmpls-ted-mib-14.txt   draft-ietf-ccamp-gmpls-ted-mib-15.txt 
INTERNET-DRAFT Masanori Miyazawa INTERNET-DRAFT Masanori Miyazawa
Intended status: Proposed Standard KDDI R&D Labs Intended status: Proposed Standard KDDI R&D Labs
Expires: March 4, 2013 Expires: April 5, 2013
Tomohiro Otani Tomohiro Otani
Kenji Kumaki Kenji Kumaki
KDDI Corporation KDDI Corporation
Thomas D. Nadeau Thomas D. Nadeau
October 4, 2012 November 6, 2012
Traffic Engineering Database Management Information Base in support of Traffic Engineering Database Management Information Base in support of
MPLS-TE/GMPLS MPLS-TE/GMPLS
draft-ietf-ccamp-gmpls-ted-mib-14.txt draft-ietf-ccamp-gmpls-ted-mib-15.txt
Status of this Memo Status of this Memo
This Internet-Draft is submitted to IETF in full conformance with This Internet-Draft is submitted to IETF in full conformance with the
the provisions of BCP 78 and BCP 79. provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF), its areas, and its working groups. Note that other Task Force (IETF), its areas, and its working groups. Note that other
groups may also distribute working documents as Internet-Drafts. groups may also distribute working documents as Internet-Drafts.
Internet-Drafts are draft documents valid for a maximum of six months Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress." material or to cite them other than as "work in progress."
skipping to change at page 2, line 4 skipping to change at page 1, line 51
document authors. All rights reserved. document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info) in effect on the date of (http://trustee.ietf.org/license-info) in effect on the date of
publication of this document. Please review these documents publication of this document. Please review these documents
carefully, as they describe your rights and restrictions with respect carefully, as they describe your rights and restrictions with respect
to this document. Code Components extracted from this document must to this document. Code Components extracted from this document must
include Simplified BSD License text as described in Section 4.e of include Simplified BSD License text as described in Section 4.e of
the Trust Legal Provisions and are provided without warranty as the Trust Legal Provisions and are provided without warranty as
described in the Simplified BSD License. described in the Simplified BSD License.
This document may contain material from IETF Documents or IETF
Contributions published or made publicly available before November 10
2008. The person(s) controlling the copyright in some of this
material may not have granted the IETF Trust the right to allow
modifications of such material outside the IETF Standards Process.
Without obtaining an adequate license from the person(s) controlling
the copyright in such materials, this document may not be modified
outside the IETF Standards Process, and derivative works of it may
not be created outside the IETF Standards Process, except to format
it for publication as an RFC or to translate it into languages other
than English.
Abstract Abstract
This memo defines the Management Information Base (MIB) objects in This memo defines the Management Information Base (MIB) objects in
order to manage traffic engineering database (TED) information with order to manage traffic engineering database (TED) information with
extension in support of Multi-Protocol Label Switching (MPLS) with extension in support of Multi-Protocol Label Switching (MPLS) with
traffic engineering (TE) as well as Generalized MPLS (GMPLS) for use traffic engineering (TE) as well as Generalized MPLS (GMPLS) for use
with network management protocols. with network management protocols.
Table of Contents Table of Contents
Status of this Memo................................................... 1 Status of this Memo ............................................... 1
Abstract.............................................................. 2 Abstract .......................................................... 2
1. The Internet-Standard Management Framework......................... 3 1. The Internet-Standard Management Framework ................... 3
2. Introduction....................................................... 3 2. Introduction ................................................. 3
3. Overview........................................................... 3 3. Overview ..................................................... 3
3.1 Conventions used in this document................................. 3 3.1 Conventions used in this document ............................ 3
3.2 Terminology....................................................... 3 3.2 Terminology .................................................. 4
3.3 Acronyms.......................................................... 4 3.3 Acronyms ..................................................... 4
4. Motivations........................................................ 4 4. Motivations .................................................. 4
5. Brief Description of MIB Modules................................... 4 5. Brief Description of MIB Modules ............................. 4
5.1 tedTable.......................................................... 4 5.1 tedTable ..................................................... 4
5.2 tedLocalIfAddrTable............................................... 4 5.2 tedLocalIfAddrTable .......................................... 4
5.3 tedRemoteIfAddrTable.............................................. 4 5.3 tedRemoteIfAddrTable ......................................... 4
5.4 tedSwCapTable..................................................... 4 5.4 tedSwCapTable ................................................ 5
5.5 tedSrlgTable...................................................... 5 5.5 tedSrlgTable ................................................. 5
6. Example of the TED MIB Module Usage................................ 5 6. Example of the TED MIB Module Usage .......................... 5
7. TED MIB Module Definitions in support of GMPLS..................... 6 7. TED MIB Module Definitions in support of GMPLS ............... 6
8. Security Consideration............................................ 29 8. Security Consideration ...................................... 29
9. IANA Considerations............................................... 30 9. IANA Considerations ......................................... 30
9.1 IANA Considerations for TED-MIB.................................. 30 9.1 IANA Considerations for TED-MIB ............................. 30
10. References....................................................... 30 10. References .................................................. 30
10.1 Normative References............................................ 30 10.1 Normative References ........................................ 30
10.2 Informative References.......................................... 30 10.2 Informative References ...................................... 30
11. Acknowledgment................................................... 32 11. Acknowledgment .............................................. 32
12. Authors' Addresses............................................... 32 12. Authors' Addresses .......................................... 33
1. The Internet-Standard Management Framework 1. The Internet-Standard Management Framework
For a detailed overview of the documents that describe the current For a detailed overview of the documents that describe the current
Internet-Standard Management Framework, please refer to section 7 of Internet-Standard Management Framework, please refer to section 7 of
RFC 3410 [RFC3410]. RFC 3410 [RFC3410].
Managed objects are accessed via a virtual information store, termed Managed objects are accessed via a virtual information store, termed
the Management Information Base or MIB. MIB objects are generally the Management Information Base or MIB. MIB objects are generally
accessed through the Simple Network Management Protocol (SNMP). accessed through the Simple Network Management Protocol (SNMP).
Objects in the MIB are defined using the mechanisms defined in the Objects in the MIB are defined using the mechanisms defined in the
skipping to change at page 3, line 26 skipping to change at page 3, line 27
RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58, RFC 2580 RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58, RFC 2580
[RFC2580]. [RFC2580].
2. Introduction 2. Introduction
The OSPF MIB was originally defined for OSPF version2 in support of The OSPF MIB was originally defined for OSPF version2 in support of
IPv4 [RFC4750] and extended to support the Internet Protocol IPv4 [RFC4750] and extended to support the Internet Protocol
version6(IPv6) as OSPF version3 MIB [RFC5643]. The ISIS MIB is also version6(IPv6) as OSPF version3 MIB [RFC5643]. The ISIS MIB is also
defined as [RFC4444]. On the other side, MPLS/GMPLS based traffic defined as [RFC4444]. On the other side, MPLS/GMPLS based traffic
engineering has so far extended OSPF/ISIS routing protocol with TE engineering has so far extended OSPF/ISIS routing protocol with TE
functionality [RFC4202], [RFC3630], [RFC5329], [RFC5307], [RFC5305]. functionality [RFC4202], [RFC3630], [RFC5329], [RFC5307] and
To manage such MPLS-TE/GMPLS networks effectively, routing [RFC5305]. To manage such MPLS-TE/GMPLS networks effectively, routing
information associated with MPLS/GMPLS TE parameters (TED) is information associated with MPLS/GMPLS TE parameters (TED) is
preferred for the network management, however, there is no clear preferred for the network management; however, there is no clear
definition of MPLS/GMPLS TE information in existing MIBs related to definition of MPLS/GMPLS TE information in existing MIBs related to
OSPF(v2 and v3)/ISIS. OSPF(v2 and v3)/ISIS.
This memo defines the Management Information Base (MIB) objects for This memo defines the Management Information Base (MIB) objects for
managing TED in support of MPLS-TE/GMPLS for use with network managing TED in support of MPLS-TE/GMPLS for use with network
management protocols. management protocols.
This MIB module should be used in conjunction with OSPFv2 MIB, OSPF This MIB module should be used in conjunction with OSPFv2 MIB, OSPF
v3 MIB and ISIS MIB as well as other MIBs defined in [RFC3812], v3 MIB and ISIS MIB as well as other MIBs defined in [RFC3812],
[RFC3813], [RFC4802], [RFC4803] for the management of MPLS/GMPLS [RFC3813], [RFC4802] and [RFC4803] for the management of MPLS/GMPLS
based traffic engineering information. based traffic engineering information. By implementing such MIB
modules, it is helpful to simultaneously understand entire MPLS/GMPLS
network such as routing information as well as LSP information using
a management system. But, note that this MIB module is able to be
implemented and performed without implementation of other MIB modules
when the management system, for example, only comprehends MPLS/GMPLS
topology information such as TE link information.
3. Overview 3. Overview
3.1 Conventions used in this document 3.1 Conventions used in this document
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
"OPTIONAL" in this document are to be interpreted as described in "OPTIONAL" in this document are to be interpreted as described in
RFC-2119 [RFC2119]. RFC-2119 [RFC2119].
skipping to change at page 4, line 14 skipping to change at page 4, line 20
3.3 Acronyms 3.3 Acronyms
GMPLS: Generalized Multi-Protocol Label Switching GMPLS: Generalized Multi-Protocol Label Switching
ISIS: Intermediate System to Intermediate System ISIS: Intermediate System to Intermediate System
LSA: Link state advertisement LSA: Link state advertisement
LSP: Label Switching Path LSP: Label Switching Path
LSR: Label Switching Router LSR: Label Switching Router
MIB: Management Information Base MIB: Management Information Base
OSPF: Open Shortest Path First OSPF: Open Shortest Path First
PSC: Packet switch capable PSC: Packet Switch Capable
SRLG: Shared risk link group SRLG: Shared Risk Link Group
TE: Traffic Engineering TE: Traffic Engineering
TED: Traffic Engineering Database TED: Traffic Engineering Database
TDM: Time Division Multiplexing TDM: Time Division Multiplexing
4. Motivations 4. Motivations
The existing OSPFv2, OSPFv3, ISIS, MPLS and GMPLS MIBs do not provide The existing OSPFv2, OSPFv3, ISIS, MPLS and GMPLS MIBs do not provide
for the management interface to retrieve topology information of MPLS for the management interface to retrieve topology information of MPLS
and GMPLS networks. and GMPLS networks.
skipping to change at page 4, line 50 skipping to change at page 4, line 56
5.2 tedLocalIfAddrTable 5.2 tedLocalIfAddrTable
The tedLocalIfAddrTable is identical to the Local interface IP The tedLocalIfAddrTable is identical to the Local interface IP
address information in a sub-TLV for the Link-TLV. This is address information in a sub-TLV for the Link-TLV. This is
independently defined, because the Interface IP Address sub-TLV may independently defined, because the Interface IP Address sub-TLV may
appear more than once within the same Link-TLV. appear more than once within the same Link-TLV.
5.3 tedRemoteIfAddrTable 5.3 tedRemoteIfAddrTable
The tedRemoteIfAddrTable is identical to the Remote interface IP The tedRemoteIfAddrTable is identical to the Remote interface IP
address information in a sub-TLV of the Link-TLV. Also, this is address information in a sub-TLV of the Link-TLV. This is
utilized independently because one or more local interface IP address independently defined, because the Interface IP Address sub-TLV may
sub TLVs may exist in the same Link-TLV. appear more than once with the same Link-TLV.
5.4 tedSwCapTable 5.4 tedSwCapTable
The tedSwCapTable represents Interface Switching Capability
Descriptor information. This is independently defined due to the The tedSwCapTable is identical to the Interface Switching Capability
possibility of multiple appearances of the sub TLV within the same Descriptor information in a sub-TLV of Link-TLV. This is
Link-TLV. independently defined, because the Interface Switching Capability
Descriptor sub-TLV may appear more than once with same Link-TLV.
5.5 tedSrlgTable 5.5 tedSrlgTable
The tedSrlgTable contains the Sub-TLV information of Shared Risk Link The tedSrlgTable is identical to the Shared Risk Link Group
Group (SRLG) information. This is separately defined, because more information in a sub-TLV of Link-TLV. Think is independently defined,
than one sub TLVs may appear in the same Link-TLV. because the Shared Risk Link Group sub-TLV may appear more than once
with the same Link-TLV.
6.Example of the TED MIB Module Usage 6.Example of the TED MIB Module Usage
In this section, we provide an example of the TED MIB module usage. In this section, we provide an example of the TED MIB module usage.
The following indicates the information of a numbered TE link The following indicates the information of a numbered TE link
originated in a GMPLS controlled node. When TE link information is originated in a GMPLS controlled node. When TE link information is
retrieved in a MPLS network, GMPLS specific objects such as retrieved in a MPLS network, GMPLS specific objects such as
tedLocalIfAddrTable, tedRemoteIfAddrTable, tedSwCapTable and tedLocalIfAddrTable, tedRemoteIfAddrTable, tedSwCapTable and
tedSrlgTable are not supported. tedSrlgTable are not supported.
By retrieval of such information periodically, the management system
can comprehend the detailed topology information related to
MPLS/GMPLS networks. In particular, the basic TED information can be
collected by tedTable, local/remote interface IP address information
related to MPLS/GMPLS network are collected by tedLocalIfAddrTable
and tedRemoteIfAddrTable. And the attribute information related to
GMPLS TE link can be retrieved by tedSwCapTable and tedSrlgTable.
Regarding a fault management, there is no functionality to notify
network failures in this MIB module. But, if network topologies are
changed, the module can notify the change information to the
management system by using tedStatusChange, tedEntryCreated and
tedEntryDeleted.
Note that the TED MIB modules are only limited to "read-only" access Note that the TED MIB modules are only limited to "read-only" access
except for tedCreatedDeletedNotificationMaxRate and except for tedCreatedDeletedNotificationMaxRate and
tedStatusChangeNotificationMaxRate. The TED MIB module is designed to tedStatusChangeNotificationMaxRate. The TED MIB module is designed to
be independent of OSPF or ISIS MIBs, however each TE link information be independent of OSPF or ISIS MIBs, however each TE link information
belongs to a node or a link which is managed by the routing protocol. belongs to a node or a link which is managed by the routing protocol.
In tedTable: In tedTable:
{ {
tedLinkInformationData.2.3232235777.3232235778.16777264 zeroDotZero tedLinkInformationData.2.3232235777.3232235778.16777264 zeroDotZero
tedLinkType.2.3232235777.3232235778.16777264 pointToPoint(1) tedLinkType.2.3232235777.3232235778.16777264 pointToPoint(1)
skipping to change at page 6, line 38 skipping to change at page 6, line 55
tedSwCapIndication.16777264.1 standard(0) tedSwCapIndication.16777264.1 standard(0)
} }
In tedSrlgTable: In tedSrlgTable:
{ {
tedSrlg.16777264.1 0 tedSrlg.16777264.1 0
} }
7. TED MIB Definitions in support of GMPLS 7. TED MIB Definitions in support of GMPLS
This MIB module makes references to the follows documents.
[RFC2328], [RFC2578], [RFC2580], [RFC3630], [RFC4001], [RFC4203],
[RFC4220], [RFC4444], [RFC4801], [RFC4802], [RFC5305], [RFC5307],
[RFC5329], [RFC5340], [RFC6340] and [ISO10589].
TED-MIB DEFINITIONS ::= BEGIN TED-MIB DEFINITIONS ::= BEGIN
IMPORTS IMPORTS
MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32, transmission, MODULE-IDENTITY, OBJECT-TYPE, Integer32, Unsigned32, transmission,
NOTIFICATION-TYPE NOTIFICATION-TYPE
FROM SNMPv2-SMI -- RFC2578 FROM SNMPv2-SMI -- RFC2578
MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP
FROM SNMPv2-CONF -- RFC2580 FROM SNMPv2-CONF -- RFC2580
TEXTUAL-CONVENTION, RowPointer TEXTUAL-CONVENTION, RowPointer
FROM SNMPv2-TC -- RFC2579 FROM SNMPv2-TC -- RFC2579
IANAGmplsLSPEncodingTypeTC, IANAGmplsSwitchingTypeTC IANAGmplsLSPEncodingTypeTC, IANAGmplsSwitchingTypeTC
FROM IANA-GMPLS-TC-MIB -- RFC4802 FROM IANA-GMPLS-TC-MIB -- RFC4802
InetAddress, InetAddressType InetAddress, InetAddressType
FROM INET-ADDRESS-MIB -- RFC4001 FROM INET-ADDRESS-MIB -- RFC4001
Float32TC Float32TC
FROM FLOAT-TC-MIB -- RFC6340 FROM FLOAT-TC-MIB -- RFC6340
; ;
tedMIB MODULE-IDENTITY tedMIB MODULE-IDENTITY
LAST-UPDATED "201210040000Z" -- 4 Oct. 2012 00:00:00 GMT LAST-UPDATED "201211060000Z" -- 6 Nov. 2012 00:00:00 GMT
ORGANIZATION "IETF CCAMP Working Group." ORGANIZATION "IETF CCAMP Working Group."
CONTACT-INFO CONTACT-INFO
" Tomohiro Otani " Tomohiro Otani
otani@kddilabs.jp otani@kddilabs.jp
Masanori Miyazawa Masanori Miyazawa
ma-miyazawa@kddilabs.jp ma-miyazawa@kddilabs.jp
Thomas D. Nadeau Thomas D. Nadeau
tnadeau@lucidvision.com tnadeau@lucidvision.com
Kenji Kumaki Kenji Kumaki
ke-kumaki@kddilabs.jp ke-kumaki@kddilabs.jp
Comments and discussion to ccamp@ietf.org" Comments and discussion to ccamp@ietf.org"
DESCRIPTION DESCRIPTION
"This MIB module contains managed object definitions for TED "This MIB module contains managed object definitions for TED in
in support of MPLS/GMPLS TE Database. support of MPLS/GMPLS TE Database.
Copyright (C) 2012 The IETF Trust. This version of this MIB Copyright (C) 2012 The IETF Trust. This version of this MIB
module is part of RFC xxx; see the RFC itself for full legal module is part of RFC xxx; see the RFC itself for full legal
notices." notices."
-- Revision history. -- Revision history.
REVISION REVISION
"201210040000Z" -- 4 Oct. 2012 00:00:00 GMT "201211060000Z" -- 6 Nov. 2012 00:00:00 GMT
DESCRIPTION DESCRIPTION
"Initial version. Published as RFC xxx." "Initial version. Published as RFC xxx."
-- RFC-editor pls fill in yyy -- RFC-editor pls fill in yyy
::= { transmission yyy } ::= { transmission yyy }
-- assigned by IANA, see section 9.1 for details -- assigned by IANA, see section 9.1 for details
-- Textual Conventions. -- Textual Conventions.
TedAreaIdTC ::= TEXTUAL-CONVENTION TedAreaIdTC ::= TEXTUAL-CONVENTION
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The area identifier of the IGP. If OSPF is used to "The area identifier of the IGP. If OSPF is used to advertise
advertise LSA, this represents an ospfArea. If ISIS is used, this LSA, this represents an ospfArea. If ISIS is used, this
represents an area address." represents an area address."
SYNTAX OCTET STRING (SIZE (0..20)) SYNTAX OCTET STRING (SIZE (0..20))
TedRouterIdTC ::= TEXTUAL-CONVENTION TedRouterIdTC ::= TEXTUAL-CONVENTION
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" The router identifier. If OSPF is used to advertise LSA, "The router identifier. If OSPF is used to advertise LSA, this
this represents a Router ID. If ISIS is used, this represents a represents a Router ID. If ISIS is used, this represents a
System ID." System ID."
SYNTAX OCTET STRING (SIZE (0..6)) SYNTAX OCTET STRING (SIZE (0..6))
TedLinkIndexTC ::= TEXTUAL-CONVENTION TedLinkIndexTC ::= TEXTUAL-CONVENTION
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" The link identifier. If OSPF is used, this represents an "The link identifier. If OSPF is used, this represents an
ospfLsdbID. If ISIS is used, this represents an isisLSPID. If a ospfLsdbID. If ISIS is used, this represents an isisLSPID. If a
locally configured link is used, this object represents an arbitrary locally configured link is used, this object represents an
value which is locally defined in a router" arbitrary value which is locally defined in a router"
SYNTAX OCTET STRING (SIZE (0..8)) SYNTAX OCTET STRING (SIZE (0..8))
-- Top level components of this MIB module. -- Top level components of this MIB module.
tedNotifications OBJECT IDENTIFIER ::= { tedMIB 0 } tedNotifications OBJECT IDENTIFIER ::= { tedMIB 0 }
tedObjects OBJECT IDENTIFIER ::= { tedMIB 1 } tedObjects OBJECT IDENTIFIER ::= { tedMIB 1 }
tedConformance OBJECT IDENTIFIER ::= { tedMIB 2 } tedConformance OBJECT IDENTIFIER ::= { tedMIB 2 }
--
-- TED Table -- TED Table
--
tedTable OBJECT-TYPE tedTable OBJECT-TYPE
SYNTAX SEQUENCE OF TedEntry SYNTAX SEQUENCE OF TedEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table indicates multiple TED information which has been "This table indicates multiple TED information which has been
supported by RFC3630 and RFC5305." supported by RFC3630 and RFC5305."
::= { tedObjects 1 } ::= { tedObjects 1 }
tedEntry OBJECT-TYPE tedEntry OBJECT-TYPE
SYNTAX TedEntry SYNTAX TedEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This entry contains TED information commonly utilized in both "This entry contains TED information commonly utilized in both
MPLS and GMPLS." MPLS and GMPLS."
INDEX { tedLocalRouterId, tedRemoteRouterId, INDEX { tedLocalRouterId, tedRemoteRouterId,
tedLinkInformationSource, tedLinkIndex } tedLinkInformationSource, tedLinkIndex }
::= { tedTable 1 } ::= { tedTable 1 }
TedEntry ::= SEQUENCE { TedEntry ::= SEQUENCE {
tedLinkInformationSource INTEGER, tedLinkInformationSource INTEGER,
tedLocalRouterId TedRouterIdTC, tedLocalRouterId TedRouterIdTC,
tedRemoteRouterId TedRouterIdTC, tedRemoteRouterId TedRouterIdTC,
tedLinkIndex TedLinkIndexTC, tedLinkIndex TedLinkIndexTC,
tedLinkInformationData RowPointer, tedLinkInformationData RowPointer,
tedLinkState INTEGER, tedLinkState INTEGER,
tedAreaId TedAreaIdTC, tedAreaId TedAreaIdTC,
skipping to change at page 9, line 29 skipping to change at page 9, line 49
unknown(0), unknown(0),
locallyConfigured(1), locallyConfigured(1),
ospfv2(2), ospfv2(2),
ospfv3(3), ospfv3(3),
isis(4), isis(4),
other(5) other(5)
} }
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the source of the information about the "This object indicates the source of the information about the
TE link." TE link."
::= { tedEntry 1 } ::= { tedEntry 1 }
tedLocalRouterId OBJECT-TYPE tedLocalRouterId OBJECT-TYPE
SYNTAX TedRouterIdTC SYNTAX TedRouterIdTC
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object represents the router ID of the router originating "This object represents the router ID of the router originating
the LSA. If OSPF is used to advertise LSA, this represents a Router the LSA. If OSPF is used to advertise LSA, this represents a
ID. If ISIS is used, this represents a System ID. Otherwise, this Router ID. If ISIS is used, this represents a System ID.
represents zero." Otherwise, this represents zero."
REFERENCE REFERENCE
" OSPF Version 2, RFC2328, C.1 "OSPF Version 2, RFC2328, C.1
OSPF for IPv6, RFC5340, C.1 OSPF for IPv6, RFC5340, C.1
ISO10589, Section 7.1 " ISO10589, Section 7.1"
::= { tedEntry 2 } ::= { tedEntry 2 }
tedRemoteRouterId OBJECT-TYPE tedRemoteRouterId OBJECT-TYPE
SYNTAX TedRouterIdTC SYNTAX TedRouterIdTC
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the router at the remote end of the link "This object indicates the router at the remote end of the link
from the originating router. If OSPF is used to advertise LSA, this from the originating router. If OSPF is used to advertise LSA,
represents a Link ID in the Link TLV. If ISIS is used, this this represents a Link ID in the Link TLV. If ISIS is used,
represents a neighbor system ID defined in RFC5305. Otherwise, this this represents a neighbor system ID defined in RFC5305.
represents zero." Otherwise, this represents zero."
REFERENCE REFERENCE
" OSPF Version 2, RFC2328, C.1 "OSPF Version 2, RFC2328, C.1
OSPF for IPv6, RFC5340, C.1 OSPF for IPv6, RFC5340, C.1
ISO10589, Section 7.1" ISO10589, Section 7.1"
::= { tedEntry 3 } ::= { tedEntry 3 }
tedLinkIndex OBJECT-TYPE tedLinkIndex OBJECT-TYPE
SYNTAX TedLinkIndexTC SYNTAX TedLinkIndexTC
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the link state identifier. If OSPF is "This object indicates the link state identifier. If OSPF is
used, this represents an ospfLsdbID. If ISIS is used, this represents used, this represents an ospfLsdbID. If ISIS is used, this
an isisLSPID. Otherwise, this represents a unique identifier within a represents an isisLSPID. Otherwise, this represents a unique
node." identifier within a node."
REFERENCE REFERENCE
"OSPF Version 2, RFC2328, A.4.1, "OSPF Version 2, RFC2328, A.4.1,
OSPF for IPv6, RFC5340, A.4.2 OSPF for IPv6, RFC5340, A.4.2
ISO10589, Section 9.8 " ISO10589, Section 9.8 "
::= { tedEntry 4 } ::= { tedEntry 4 }
tedLinkInformationData OBJECT-TYPE tedLinkInformationData OBJECT-TYPE
SYNTAX RowPointer SYNTAX RowPointer
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" If tedLinkInformationSource has the value unknown(0), this "If tedLinkInformationSource has the value unknown(0), this
object MUST contain a value of zeroDotZero. object MUST contain a value of zeroDotZero.
If tedLinkInformationSource has the value If tedLinkInformationSource has the value locallyConfigured(1),
locallyConfigured(1), an implementation can use this object to an implementation can use this object to supply the identifier
supply the identifier of the corresponding row entry in the of the corresponding row entry in the teLinkTable of TE-LINK-
teLinkTable of TE-LINK-STD-MIB (RFC 4220), the identifier of the STD-MIB (RFC 4220), the identifier of the corresponding row in
corresponding row in a local proprietary TE link MIB module, or a local proprietary TE link MIB module, or the value of
the value of zeroDotZero. zeroDotZero.
If tedLinkInformationSource has the value ospfv2(2)and
ospfv3(3), an implementation can use this object to supply the If tedLinkInformationSource has the value ospfv2(2)and
identifier of the corresponding row entry in the ospfv3(3), an implementation can use this object to supply the
ospfLocalLsdbTable (OSPFv2-MIB) and the ospfv3AreaLsdbTable identifier of the corresponding row entry in the
(OSPFv3-MIB), or the value of zeroDotZero. ospfLocalLsdbTable (OSPFv2-MIB) and the ospfv3AreaLsdbTable
If tedLinkInformationSource has the value isis(4), an (OSPFv3-MIB), or the value of zeroDotZero.
implementation can use this object to supply the identifier of If tedLinkInformationSource has the value isis(4), an
the corresponding row entry in the isisAreaAddr of ISIS-MIB implementation can use this object to supply the identifier of
(RFC4444), or the value of zeroDotZero. the corresponding row entry in the isisAreaAddr of ISIS-MIB
If tedLinkInformationSource has the value other(5), an (RFC4444), or the value of zeroDotZero.
implementation can use this object to supply the identifier of If tedLinkInformationSource has the value other(5), an
the corresponding row entry in the local proprietary MIB module, implementation can use this object to supply the identifier of
or the value of zeroDotZero." the corresponding row entry in the local proprietary MIB module,
or the value of zeroDotZero."
::= { tedEntry 5 } ::= { tedEntry 5 }
tedLinkState OBJECT-TYPE tedLinkState OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
unknown (0), unknown (0),
up (1), up (1),
down (2) down (2)
} }
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object represents the actual operational state of this "This object represents the actual operational state of this TE
TE link. For instance, if a row is created in the tedTable, but the link. For instance, if a row is created in the tedTable, but
actual TE link is not available for some reason (e.g. when there is the actual TE link is not available for some reason (e.g. when
not yet physical link or manually disable), then the object would be there is not yet physical link or manually disable), then the
down(2) state. In contrast, if a row is added and the TE link is object would be down(2) state. In contrast, if a row is added
available, this would be operationally up(1)." and the TE link is available, this would be operationally
up(1)."
::= { tedEntry 6 } ::= { tedEntry 6 }
tedAreaId OBJECT-TYPE tedAreaId OBJECT-TYPE
SYNTAX TedAreaIdTC SYNTAX TedAreaIdTC
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the area identifier of the IGP. If OSPF "This object indicates the area identifier of the IGP. If OSPF
is used to advertise LSA, this represents an ospfArea. If ISIS is is used to advertise LSA, this represents an ospfArea. If ISIS
used, this represents an area address. Otherwise, this represents is used, this represents an area address. Otherwise, this
zero." represents zero."
REFERENCE REFERENCE
" OSPF Version 2, RFC2328, C.2 "OSPF Version 2, RFC2328, C.2
OSPF for IPv6, RFC5340, C.2 OSPF for IPv6, RFC5340, C.2
ISO10589, Section 9.8 " ISO10589, Section 9.8"
::= { tedEntry 7 } ::= { tedEntry 7 }
tedLinkType OBJECT-TYPE tedLinkType OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
pointToPoint (1), pointToPoint (1),
multiAccess (2) multiAccess (2)
} }
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the type of the link such as point-to-point or "This indicates the type of the link such as point-to-point or
multi-access." multi-access."
REFERENCE REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, RFC "Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
3630, 2.5.1" 3630, 2.5.1"
::= { tedEntry 8 } ::= { tedEntry 8 }
tedTeRouterIdAddrType OBJECT-TYPE tedTeRouterIdAddrType OBJECT-TYPE
SYNTAX InetAddressType SYNTAX InetAddressType
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object indicates the TE-Router ID address type. Only "This object indicates the TE-Router ID address type. Only
values unknown(0), ipv4(1) or ipv6(2) are supported. " values unknown(0), ipv4(1) or ipv6(2) are supported. "
::= { tedEntry 9 } ::= { tedEntry 9 }
tedTeRouterIdAddr OBJECT-TYPE tedTeRouterIdAddr OBJECT-TYPE
SYNTAX InetAddress SYNTAX InetAddress
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the TE-Router ID." "This object indicates the TE-Router ID."
REFERENCE REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, RFC "Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
3630, 2.4.1 3630, 2.4.1
IS-IS extensions for TE, RFC5305, 4.3" IS-IS extensions for TE, RFC5305, 4.3"
::= { tedEntry 10 } ::= { tedEntry 10 }
tedLinkIdAddrType OBJECT-TYPE tedLinkIdAddrType OBJECT-TYPE
SYNTAX InetAddressType SYNTAX InetAddressType
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object indicates the address type of the TE Link ID. "This object indicates the address type of the TE Link ID. Only
Only values unknown(0), ipv4(1) or ipv6(2) are supported." values unknown(0), ipv4(1) or ipv6(2) are supported."
::= { tedEntry 11 } ::= { tedEntry 11 }
tedLinkIdAddr OBJECT-TYPE tedLinkIdAddr OBJECT-TYPE
SYNTAX InetAddress SYNTAX InetAddress
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the Router ID of the neighbor in the case of "This indicates the Router ID of the neighbor in the case of
point-to-point links. This also indicates the interface address of point-to-point links. This also indicates the interface
the designated router in the case of multi-access links." address of the designated router in the case of multi-access
links."
REFERENCE REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, RFC "Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
3630, 2.5.2 3630, 2.5.2
IS-IS extensions for TE, RFC5305, 4.3" IS-IS extensions for TE, RFC5305, 4.3"
::= { tedEntry 12 } ::= { tedEntry 12 }
tedMetric OBJECT-TYPE tedMetric OBJECT-TYPE
SYNTAX Integer32 SYNTAX Integer32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the traffic engineering metric value of the TE "This indicates the traffic engineering metric value of the TE
link." link."
REFERENCE REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, RFC "Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
3630, 2.5.5 3630, 2.5.5
IS-IS extensions for TE, RFC5305, 3.7" IS-IS extensions for TE, RFC5305, 3.7"
::= { tedEntry 13 } ::= { tedEntry 13 }
tedMaxBandwidth OBJECT-TYPE tedMaxBandwidth OBJECT-TYPE
SYNTAX Float32TC SYNTAX Float32TC
UNITS "Byte per second" UNITS "Byte per second"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the maximum bandwidth that can be used on this "This indicates the maximum bandwidth that can be used on this
link in this direction." link in this direction."
REFERENCE REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, RFC "Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
3630, 2.5.6 3630, 2.5.6
IS-IS extensions for TE, RFC5305, 3.4" IS-IS extensions for TE, RFC5305, 3.4"
::= { tedEntry 14 } ::= { tedEntry 14 }
tedMaxReservableBandwidth OBJECT-TYPE tedMaxReservableBandwidth OBJECT-TYPE
SYNTAX Float32TC SYNTAX Float32TC
UNITS "Byte per second" UNITS "Byte per second"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the maximum bandwidth that may be reserved on "This indicates the maximum bandwidth that may be reserved on
this link in this direction." this link in this direction."
REFERENCE REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, RFC "Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
3630, 2.5.7 3630, 2.5.7
IS-IS extensions for TE, RFC5305, 3.5" IS-IS extensions for TE, RFC5305, 3.5"
::= { tedEntry 15 } ::= { tedEntry 15 }
tedUnreservedBandwidthPri0 OBJECT-TYPE tedUnreservedBandwidthPri0 OBJECT-TYPE
SYNTAX Float32TC SYNTAX Float32TC
UNITS "Byte per second" UNITS "Byte per second"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the amount of bandwidth not yet reserved at the "This indicates the amount of bandwidth not yet reserved at the
priority 0." priority 0."
REFERENCE REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, RFC "Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
3630, 2.5.8 3630, 2.5.8
IS-IS extensions for TE, RFC5305, 3.6" IS-IS extensions for TE, RFC5305, 3.6"
::= { tedEntry 16 } ::= { tedEntry 16 }
tedUnreservedBandwidthPri1 OBJECT-TYPE tedUnreservedBandwidthPri1 OBJECT-TYPE
SYNTAX Float32TC SYNTAX Float32TC
UNITS "Byte per second" UNITS "Byte per second"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the amount of bandwidth not yet reserved at the "This indicates the amount of bandwidth not yet reserved at the
priority 1." priority 1."
REFERENCE REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, RFC "Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
3630, 2.5.8 3630, 2.5.8
IS-IS extensions for TE, RFC5305, 3.6" IS-IS extensions for TE, RFC5305, 3.6"
::= { tedEntry 17 } ::= { tedEntry 17 }
tedUnreservedBandwidthPri2 OBJECT-TYPE tedUnreservedBandwidthPri2 OBJECT-TYPE
SYNTAX Float32TC SYNTAX Float32TC
UNITS "Byte per second" UNITS "Byte per second"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the amount of bandwidth not yet reserved at the "This indicates the amount of bandwidth not yet reserved at the
priority 2." priority 2."
REFERENCE REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, RFC "Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
3630, 2.5.8 3630, 2.5.8
IS-IS extensions for TE, RFC5305, 3.6" IS-IS extensions for TE, RFC5305, 3.6"
::= { tedEntry 18 } ::= { tedEntry 18 }
tedUnreservedBandwidthPri3 OBJECT-TYPE tedUnreservedBandwidthPri3 OBJECT-TYPE
SYNTAX Float32TC SYNTAX Float32TC
UNITS "Byte per second" UNITS "Byte per second"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the amount of bandwidth not yet reserved at the "This indicates the amount of bandwidth not yet reserved at the
priority 3." priority 3."
REFERENCE REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, RFC "Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
3630, 2.5.8 3630, 2.5.8
IS-IS extensions for TE, RFC5305, 3.6" IS-IS extensions for TE, RFC5305, 3.6"
::= { tedEntry 19 } ::= { tedEntry 19 }
tedUnreservedBandwidthPri4 OBJECT-TYPE tedUnreservedBandwidthPri4 OBJECT-TYPE
SYNTAX Float32TC SYNTAX Float32TC
UNITS "Byte per second" UNITS "Byte per second"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the amount of bandwidth not yet reserved at the "This indicates the amount of bandwidth not yet reserved at the
priority 4." priority 4."
REFERENCE REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, RFC "Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
3630, 2.5.8 3630, 2.5.8
IS-IS extensions for TE, RFC5305, 3.6" IS-IS extensions for TE, RFC5305, 3.6"
::= { tedEntry 20 } ::= { tedEntry 20 }
tedUnreservedBandwidthPri5 OBJECT-TYPE tedUnreservedBandwidthPri5 OBJECT-TYPE
SYNTAX Float32TC SYNTAX Float32TC
UNITS "Byte per second" UNITS "Byte per second"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the amount of bandwidth not yet reserved at the "This indicates the amount of bandwidth not yet reserved at the
priority 5." priority 5."
REFERENCE REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, RFC "Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
3630, 2.5.8 3630, 2.5.8
IS-IS extensions for TE, RFC5305, 3.6" IS-IS extensions for TE, RFC5305, 3.6"
::= { tedEntry 21 } ::= { tedEntry 21 }
tedUnreservedBandwidthPri6 OBJECT-TYPE tedUnreservedBandwidthPri6 OBJECT-TYPE
SYNTAX Float32TC SYNTAX Float32TC
UNITS "Byte per second" UNITS "Byte per second"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the amount of bandwidth not yet reserved at the "This indicates the amount of bandwidth not yet reserved at the
priority 6." priority 6."
REFERENCE REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, RFC "Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
3630, 2.5.8 3630, 2.5.8
IS-IS extensions for TE, RFC5305, 3.6" IS-IS extensions for TE, RFC5305, 3.6"
::= { tedEntry 22 } ::= { tedEntry 22 }
tedUnreservedBandwidthPri7 OBJECT-TYPE tedUnreservedBandwidthPri7 OBJECT-TYPE
SYNTAX Float32TC SYNTAX Float32TC
UNITS "Byte per second" UNITS "Byte per second"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the amount of bandwidth not yet reserved at the "This indicates the amount of bandwidth not yet reserved at the
priority 7." priority 7."
REFERENCE REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, RFC "Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
3630, 2.5.8 3630, 2.5.8
IS-IS extensions for TE, RFC5305, 3.6" IS-IS extensions for TE, RFC5305, 3.6"
::= { tedEntry 23 } ::= { tedEntry 23 }
tedAdministrativeGroup OBJECT-TYPE tedAdministrativeGroup OBJECT-TYPE
SYNTAX Integer32 SYNTAX Integer32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the Administrative Group which the link belong "This indicates the Administrative Group which the link belong
to. Since the value is a bit mask, the link can belong to multiple to. Since the value is a bit mask, the link can belong to
groups. This is also called Resource Class/Color." multiple groups. This is also called Resource Class/Color."
REFERENCE REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, RFC "Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
3630, 2.5.9 3630, 2.5.9
IS-IS extensions for TE, RFC5305, 3.1" IS-IS extensions for TE, RFC5305, 3.1"
::= { tedEntry 24 } ::= { tedEntry 24 }
tedLocalId OBJECT-TYPE tedLocalId OBJECT-TYPE
SYNTAX Integer32 SYNTAX Integer32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the Link local identifier of an unnumbered "This indicates the Link local identifier of an unnumbered
link." link."
REFERENCE REFERENCE
" OSPF Extensions in Support of GMPLS, RFC4203, 1.1 "OSPF Extensions in Support of GMPLS, RFC4203, 1.1
IS-IS Extensions in Support of GMPLS, RFC5307, 1.1" IS-IS Extensions in Support of GMPLS, RFC5307, 1.1"
::= { tedEntry 25 } ::= { tedEntry 25 }
tedRemoteId OBJECT-TYPE tedRemoteId OBJECT-TYPE
SYNTAX Integer32 SYNTAX Integer32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This indicates the Link remote identifier of an unnumbered "This indicates the Link remote identifier of an unnumbered
link." link."
REFERENCE REFERENCE
" OSPF Extensions in Support of GMPLS, RFC4203, 1.1 "OSPF Extensions in Support of GMPLS, RFC4203, 1.1
IS-IS Extensions in Support of GMPLS, RFC5307, 1.1" IS-IS Extensions in Support of GMPLS, RFC5307, 1.1"
::= { tedEntry 26 } ::= { tedEntry 26 }
tedLinkProtectionType OBJECT-TYPE tedLinkProtectionType OBJECT-TYPE
SYNTAX BITS { SYNTAX BITS {
extraTraffic(0), extraTraffic(0),
unprotected(1), unprotected(1),
shared (2), shared (2),
dedicatedOneToOne (3), dedicatedOneToOne (3),
dedicatedOnePlusOne(4), dedicatedOnePlusOne(4),
enhanced(5) enhanced(5)
} }
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the protection type of the TE link." "This object indicates the protection type of the TE link."
REFERENCE REFERENCE
" OSPF Extensions in Support of GMPLS, RFC4203, 1.2 "OSPF Extensions in Support of GMPLS, RFC4203, 1.2
IS-IS Extensions in Support of GMPLS, RFC5307, 1.2" IS-IS Extensions in Support of GMPLS, RFC5307, 1.2"
::= { tedEntry 27 } ::= { tedEntry 27 }
--
-- TED Local Interface IP Address Table -- TED Local Interface IP Address Table
--
tedLocalIfAddrTable OBJECT-TYPE tedLocalIfAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF TedLocalIfAddrEntry SYNTAX SEQUENCE OF TedLocalIfAddrEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table contains the IP address information of a local TE "This table contains the IP address information of a local TE
link." link."
::= { tedObjects 2 } ::= { tedObjects 2 }
tedLocalIfAddrEntry OBJECT-TYPE tedLocalIfAddrEntry OBJECT-TYPE
SYNTAX TedLocalIfAddrEntry SYNTAX TedLocalIfAddrEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This entry contains the IP address information of the local TE "This entry contains the IP address information of the local TE
link." link."
INDEX { tedLinkIndex, tedLocalIfAddr } INDEX { tedLinkIndex, tedLocalIfAddr }
::= { tedLocalIfAddrTable 1 } ::= { tedLocalIfAddrTable 1 }
TedLocalIfAddrEntry ::= SEQUENCE { TedLocalIfAddrEntry ::= SEQUENCE {
tedLocalIfAddrType InetAddressType, tedLocalIfAddrType InetAddressType,
tedLocalIfAddr InetAddress tedLocalIfAddr InetAddress
} }
tedLocalIfAddrType OBJECT-TYPE tedLocalIfAddrType OBJECT-TYPE
SYNTAX InetAddressType SYNTAX InetAddressType
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the address type of the local TE link. "This object indicates the address type of the local TE link.
Only values unknown(0), ipv4(1) or ipv6(2) have to be supported." Only values unknown(0), ipv4(1) or ipv6(2) have to be
supported."
::= { tedLocalIfAddrEntry 1 } ::= { tedLocalIfAddrEntry 1 }
tedLocalIfAddr OBJECT-TYPE tedLocalIfAddr OBJECT-TYPE
SYNTAX InetAddress (SIZE (1..20)) SYNTAX InetAddress (SIZE (1..20))
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the address of the local TE link." "This object indicates the address of the local TE link."
REFERENCE REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, RFC "Traffic Engineering (TE) Extensions to OSPF Version 2, RFC3630,
3630, 2.5.3, 2.5.3,
Traffic Engineering Extensions to OSPF Version3, RFC5329, 4.3 Traffic Engineering Extensions to OSPF Version3, RFC5329, 4.3
IS-IS extensions for TE, RFC5305, 3.4 " IS-IS extensions for TE, RFC5305, 3.4"
::= { tedLocalIfAddrEntry 2 } ::= { tedLocalIfAddrEntry 2 }
--
-- TED Remote Interface IP Address Table -- TED Remote Interface IP Address Table
--
tedRemoteIfAddrTable OBJECT-TYPE tedRemoteIfAddrTable OBJECT-TYPE
SYNTAX SEQUENCE OF TedRemoteIfAddrEntry SYNTAX SEQUENCE OF TedRemoteIfAddrEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table contains the IP address information of a remote TE "This table contains the IP address information of a remote TE
link." link."
::= { tedObjects 3 } ::= { tedObjects 3 }
tedRemoteIfAddrEntry OBJECT-TYPE tedRemoteIfAddrEntry OBJECT-TYPE
SYNTAX TedRemoteIfAddrEntry SYNTAX TedRemoteIfAddrEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This entry contains the IP address information of the remote "This entry contains the IP address information of the remote
TE link." TE link."
INDEX { tedLinkIndex, tedRemoteIfAddr } INDEX { tedLinkIndex, tedRemoteIfAddr }
::= { tedRemoteIfAddrTable 1 } ::= { tedRemoteIfAddrTable 1 }
TedRemoteIfAddrEntry ::= SEQUENCE { TedRemoteIfAddrEntry ::= SEQUENCE {
tedRemoteIfAddrType InetAddressType, tedRemoteIfAddrType InetAddressType,
tedRemoteIfAddr InetAddress tedRemoteIfAddr InetAddress
} }
tedRemoteIfAddrType OBJECT-TYPE tedRemoteIfAddrType OBJECT-TYPE
SYNTAX InetAddressType SYNTAX InetAddressType
skipping to change at page 18, line 15 skipping to change at page 18, line 31
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the address type of the remote TE link." "This object indicates the address type of the remote TE link."
::= { tedRemoteIfAddrEntry 1 } ::= { tedRemoteIfAddrEntry 1 }
tedRemoteIfAddr OBJECT-TYPE tedRemoteIfAddr OBJECT-TYPE
SYNTAX InetAddress(SIZE (1..20)) SYNTAX InetAddress(SIZE (1..20))
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the address of the remote TE link." "This object indicates the address of the remote TE link."
REFERENCE REFERENCE
" Traffic Engineering (TE) Extensions to OSPF Version 2, RFC "Traffic Engineering (TE) Extensions to OSPF Version 2, RFC
3630, 2.5.4, 3630, 2.5.4,
Traffic Engineering Extensions to OSPF Version3, RFC5329, 4.4 Traffic Engineering Extensions to OSPF Version3, RFC5329, 4.4
IS-IS extensions for TE, RFC5305, 3.3 " IS-IS extensions for TE, RFC5305, 3.3"
::= { tedRemoteIfAddrEntry 2 } ::= { tedRemoteIfAddrEntry 2 }
--
-- TED Switching Capability Table -- TED Switching Capability Table
--
tedSwCapTable OBJECT-TYPE tedSwCapTable OBJECT-TYPE
SYNTAX SEQUENCE OF TedSwCapEntry SYNTAX SEQUENCE OF TedSwCapEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table contains the GMPLS TED switching capability "This table contains the GMPLS TED switching capability
information." information."
::= { tedObjects 4 } ::= { tedObjects 4 }
tedSwCapEntry OBJECT-TYPE tedSwCapEntry OBJECT-TYPE
SYNTAX TedSwCapEntry SYNTAX TedSwCapEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This entry relates each TE link with its GMPLS TE switching "This entry relates each TE link with its GMPLS TE switching
capability information. If the MIB module deals with only OSPF-TE capability information. If the MIB module deals with only OSPF-
information, the value of each object related with GMPLS TE TE information, the value of each object related with GMPLS TE
extensions should be null." extensions should be null."
INDEX { tedLinkIndex, tedSwCapIndex } INDEX { tedLinkIndex, tedSwCapIndex }
::= { tedSwCapTable 1 } ::= { tedSwCapTable 1 }
TedSwCapEntry ::= SEQUENCE { TedSwCapEntry ::= SEQUENCE {
tedSwCapIndex Unsigned32, tedSwCapIndex Unsigned32,
tedSwCapType IANAGmplsSwitchingTypeTC, tedSwCapType IANAGmplsSwitchingTypeTC,
tedSwCapEncoding IANAGmplsLSPEncodingTypeTC, tedSwCapEncoding IANAGmplsLSPEncodingTypeTC,
tedSwCapMaxLspBandwidthPri0 Float32TC, tedSwCapMaxLspBandwidthPri0 Float32TC,
tedSwCapMaxLspBandwidthPri1 Float32TC, tedSwCapMaxLspBandwidthPri1 Float32TC,
tedSwCapMaxLspBandwidthPri2 Float32TC, tedSwCapMaxLspBandwidthPri2 Float32TC,
skipping to change at page 19, line 16 skipping to change at page 19, line 31
tedSwCapMinLspBandwidth Float32TC, tedSwCapMinLspBandwidth Float32TC,
tedSwCapIfMtu Integer32, tedSwCapIfMtu Integer32,
tedSwCapIndication INTEGER tedSwCapIndication INTEGER
} }
tedSwCapIndex OBJECT-TYPE tedSwCapIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..255) SYNTAX Unsigned32 (1..255)
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This index is utilized to identify multiple switching "This index is utilized to identify multiple switching
functions on a local or remote TE link according to definitions of functions on a local or remote TE link according to definitions
textual conventions of GMPLS, RFC4801." of textual conventions of GMPLS, RFC4801."
::= { tedSwCapEntry 1 } ::= { tedSwCapEntry 1 }
tedSwCapType OBJECT-TYPE tedSwCapType OBJECT-TYPE
SYNTAX IANAGmplsSwitchingTypeTC SYNTAX IANAGmplsSwitchingTypeTC
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the GMPLS switching capability assigned "This object indicates the GMPLS switching capability assigned
to the TE link according to definitions of textual conventions of to the TE link according to definitions of textual conventions
GMPLS, RFC4801." of GMPLS, RFC4801."
REFERENCE REFERENCE
" OSPF Extensions in Support of GMPLS, RFC4203, 1.4 "OSPF Extensions in Support of GMPLS, RFC4203, 1.4
IS-IS Extensions in Support of GMPLS, RFC5307, 1.3 " IS-IS Extensions in Support of GMPLS, RFC5307, 1.3"
::= { tedSwCapEntry 2 } ::= { tedSwCapEntry 2 }
tedSwCapEncoding OBJECT-TYPE tedSwCapEncoding OBJECT-TYPE
SYNTAX IANAGmplsLSPEncodingTypeTC SYNTAX IANAGmplsLSPEncodingTypeTC
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the GMPLS encoding type assigned to the "This object indicates the GMPLS encoding type assigned to the
TE link." TE link."
REFERENCE REFERENCE
" OSPF Extensions in Support of GMPLS, RFC4203, 1.4 "OSPF Extensions in Support of GMPLS, RFC4203, 1.4
IS-IS Extensions in Support of GMPLS, RFC5307, 1.3 " IS-IS Extensions in Support of GMPLS, RFC5307, 1.3"
::= { tedSwCapEntry 3 } ::= { tedSwCapEntry 3 }
tedSwCapMaxLspBandwidthPri0 OBJECT-TYPE tedSwCapMaxLspBandwidthPri0 OBJECT-TYPE
SYNTAX Float32TC SYNTAX Float32TC
UNITS "Byte per second" UNITS "Byte per second"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the maximum bandwidth of the TE link at "This object indicates the maximum bandwidth of the TE link at
the priority 0 for GMPLS LSP creation." the priority 0 for GMPLS LSP creation."
REFERENCE REFERENCE
" OSPF Extensions in Support of GMPLS, RFC4203, 1.4 "OSPF Extensions in Support of GMPLS, RFC4203, 1.4
IS-IS Extensions in Support of GMPLS, RFC5307, 1.3" IS-IS Extensions in Support of GMPLS, RFC5307, 1.3"
::= { tedSwCapEntry 4 } ::= { tedSwCapEntry 4 }
tedSwCapMaxLspBandwidthPri1 OBJECT-TYPE tedSwCapMaxLspBandwidthPri1 OBJECT-TYPE
SYNTAX Float32TC SYNTAX Float32TC
UNITS "Byte per second" UNITS "Byte per second"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the maximum bandwidth of the TE link at "This object indicates the maximum bandwidth of the TE link at
the priority 1 for GMPLS LSP creation." the priority 1 for GMPLS LSP creation."
REFERENCE REFERENCE
" OSPF Extensions in Support of GMPLS, RFC4203, 1.4 "OSPF Extensions in Support of GMPLS, RFC4203, 1.4
IS-IS Extensions in Support of GMPLS, RFC5307, 1.3 " IS-IS Extensions in Support of GMPLS, RFC5307, 1.3"
::= { tedSwCapEntry 5 } ::= { tedSwCapEntry 5 }
tedSwCapMaxLspBandwidthPri2 OBJECT-TYPE tedSwCapMaxLspBandwidthPri2 OBJECT-TYPE
SYNTAX Float32TC SYNTAX Float32TC
UNITS "Byte per second" UNITS "Byte per second"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the maximum bandwidth of the TE link at "This object indicates the maximum bandwidth of the TE link at
the priority 2 for GMPLS LSP creation." the priority 2 for GMPLS LSP creation."
REFERENCE REFERENCE
" OSPF Extensions in Support of GMPLS, RFC4203, 1.4 "OSPF Extensions in Support of GMPLS, RFC4203, 1.4
IS-IS Extensions in Support of GMPLS, RFC5307, 1.3 " IS-IS Extensions in Support of GMPLS, RFC5307, 1.3"
::= { tedSwCapEntry 6 } ::= { tedSwCapEntry 6 }
tedSwCapMaxLspBandwidthPri3 OBJECT-TYPE tedSwCapMaxLspBandwidthPri3 OBJECT-TYPE
SYNTAX Float32TC SYNTAX Float32TC
UNITS "Byte per second" UNITS "Byte per second"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the maximum bandwidth of the TE link at "This object indicates the maximum bandwidth of the TE link at
the priority 3 for GMPLS LSP creation." the priority 3 for GMPLS LSP creation."
REFERENCE REFERENCE
" OSPF Extensions in Support of GMPLS, RFC4203, 1.4 "OSPF Extensions in Support of GMPLS, RFC4203, 1.4
IS-IS Extensions in Support of GMPLS, RFC5307, 1.3 " IS-IS Extensions in Support of GMPLS, RFC5307, 1.3"
::= { tedSwCapEntry 7 } ::= { tedSwCapEntry 7 }
tedSwCapMaxLspBandwidthPri4 OBJECT-TYPE tedSwCapMaxLspBandwidthPri4 OBJECT-TYPE
SYNTAX Float32TC SYNTAX Float32TC
UNITS "Byte per second" UNITS "Byte per second"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the maximum bandwidth of the TE link at "This object indicates the maximum bandwidth of the TE link at
the priority 4 for GMPLS LSP creation." the priority 4 for GMPLS LSP creation."
REFERENCE REFERENCE
" OSPF Extensions in Support of GMPLS, RFC4203, 1.4 "OSPF Extensions in Support of GMPLS, RFC4203, 1.4
IS-IS Extensions in Support of GMPLS, RFC5307, 1.3 " IS-IS Extensions in Support of GMPLS, RFC5307, 1.3"
::= { tedSwCapEntry 8 } ::= { tedSwCapEntry 8 }
tedSwCapMaxLspBandwidthPri5 OBJECT-TYPE tedSwCapMaxLspBandwidthPri5 OBJECT-TYPE
SYNTAX Float32TC SYNTAX Float32TC
UNITS "Byte per second" UNITS "Byte per second"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the maximum bandwidth of the TE link at "This object indicates the maximum bandwidth of the TE link at
the priority 5 for GMPLS LSP creation." the priority 5 for GMPLS LSP creation."
REFERENCE REFERENCE
" OSPF Extensions in Support of GMPLS, RFC4203, 1.4 "OSPF Extensions in Support of GMPLS, RFC4203, 1.4
IS-IS Extensions in Support of GMPLS, RFC5307, 1.3 " IS-IS Extensions in Support of GMPLS, RFC5307, 1.3"
::= { tedSwCapEntry 9 } ::= { tedSwCapEntry 9 }
tedSwCapMaxLspBandwidthPri6 OBJECT-TYPE tedSwCapMaxLspBandwidthPri6 OBJECT-TYPE
SYNTAX Float32TC SYNTAX Float32TC
UNITS "Byte per second" UNITS "Byte per second"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the maximum bandwidth of the TE link at "This object indicates the maximum bandwidth of the TE link at
the priority 6 for GMPLS LSP creation." the priority 6 for GMPLS LSP creation."
REFERENCE REFERENCE
" OSPF Extensions in Support of GMPLS, RFC4203, 1.4 "OSPF Extensions in Support of GMPLS, RFC4203, 1.4
IS-IS Extensions in Support of GMPLS, RFC5307, 1.3 " IS-IS Extensions in Support of GMPLS, RFC5307, 1.3"
::= { tedSwCapEntry 10 } ::= { tedSwCapEntry 10 }
tedSwCapMaxLspBandwidthPri7 OBJECT-TYPE tedSwCapMaxLspBandwidthPri7 OBJECT-TYPE
SYNTAX Float32TC SYNTAX Float32TC
UNITS "Byte per second" UNITS "Byte per second"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the maximum bandwidth of the TE link at "This object indicates the maximum bandwidth of the TE link at
the priority 7 for GMPLS LSP creation." the priority 7 for GMPLS LSP creation."
REFERENCE REFERENCE
" OSPF Extensions in Support of GMPLS, RFC4203, 1.4 "OSPF Extensions in Support of GMPLS, RFC4203, 1.4
IS-IS Extensions in Support of GMPLS, RFC5307, 1.3 " IS-IS Extensions in Support of GMPLS, RFC5307, 1.3"
::= { tedSwCapEntry 11 } ::= { tedSwCapEntry 11 }
tedSwCapMinLspBandwidth OBJECT-TYPE tedSwCapMinLspBandwidth OBJECT-TYPE
SYNTAX Float32TC SYNTAX Float32TC
UNITS "Byte per second" UNITS "Byte per second"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the minimum bandwidth of the TE link for "This object indicates the minimum bandwidth of the TE link for
GMPLS LSP creation if the switching capability field is TDM, PSC-1, GMPLS LSP creation if the switching capability field is TDM,
PSC-2, PSC-3, or PSC-4." PSC-1, PSC-2, PSC-3, or PSC-4."
REFERENCE REFERENCE
" OSPF Extensions in Support of GMPLS, RFC4203, 1.4 "OSPF Extensions in Support of GMPLS, RFC4203, 1.4
IS-IS Extensions in Support of GMPLS, RFC5307, 1.3 " IS-IS Extensions in Support of GMPLS, RFC5307, 1.3"
::= { tedSwCapEntry 12 } ::= { tedSwCapEntry 12 }
tedSwCapIfMtu OBJECT-TYPE tedSwCapIfMtu OBJECT-TYPE
SYNTAX Integer32 SYNTAX Integer32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates the MTU of the local or remote TE link." "This object indicates the MTU of the local or remote TE link."
REFERENCE REFERENCE
" OSPF Extensions in Support of GMPLS, RFC4203, 1.4 "OSPF Extensions in Support of GMPLS, RFC4203, 1.4
IS-IS Extensions in Support of GMPLS, RFC5307, 1.3 " IS-IS Extensions in Support of GMPLS, RFC5307, 1.3"
::= { tedSwCapEntry 13 } ::= { tedSwCapEntry 13 }
tedSwCapIndication OBJECT-TYPE tedSwCapIndication OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
standard (0), standard (0),
arbitrary (1) arbitrary (1)
} }
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicates whether the interface supports Standard "This object indicates whether the interface supports Standard
or Arbitrary SONET SDH." or Arbitrary SONET SDH."
REFERENCE REFERENCE
" OSPF Extensions in Support of GMPLS, RFC4203, 1.4 "OSPF Extensions in Support of GMPLS, RFC4203, 1.4
IS-IS Extensions in Support of GMPLS, RFC5307, 1.3 " IS-IS Extensions in Support of GMPLS, RFC5307, 1.3"
::= { tedSwCapEntry 14 } ::= { tedSwCapEntry 14 }
--
-- TED SRLG Table -- TED SRLG Table
--
tedSrlgTable OBJECT-TYPE tedSrlgTable OBJECT-TYPE
SYNTAX SEQUENCE OF TedSrlgEntry SYNTAX SEQUENCE OF TedSrlgEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table contains the SRLG information of the TE link." "This table contains the SRLG information of the TE link."
::= { tedObjects 5 } ::= { tedObjects 5 }
tedSrlgEntry OBJECT-TYPE tedSrlgEntry OBJECT-TYPE
skipping to change at page 23, line 5 skipping to change at page 23, line 18
TedSrlgEntry ::= SEQUENCE { TedSrlgEntry ::= SEQUENCE {
tedSrlgIndex Unsigned32, tedSrlgIndex Unsigned32,
tedSrlg Integer32 tedSrlg Integer32
} }
tedSrlgIndex OBJECT-TYPE tedSrlgIndex OBJECT-TYPE
SYNTAX Unsigned32(1..255) SYNTAX Unsigned32(1..255)
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This index is utilized to identify multiple SRLG values on a "This index is utilized to identify multiple SRLG values on a
local or remote TE link. This object represents an arbitrary value local or remote TE link. This object represents an arbitrary
which is locally defined in a router." value which is locally defined in a router."
REFERENCE REFERENCE
" OSPF Extensions in support of GMPLS, RFC4203, 1.3 "OSPF Extensions in support of GMPLS, RFC4203, 1.3
IS-IS Extensions in Support of GMPLS, RFC5307, 1.4 " IS-IS Extensions in Support of GMPLS, RFC5307, 1.4"
::= { tedSrlgEntry 1 } ::= { tedSrlgEntry 1 }
tedSrlg OBJECT-TYPE tedSrlg OBJECT-TYPE
SYNTAX Integer32 SYNTAX Integer32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object indicate the SRLG value assigned to a local or "This object indicate the SRLG value assigned to a local or
remote TE link" remote TE link"
REFERENCE REFERENCE
" OSPF Extensions in Support of GMPLS, RFC4203, 1.3 "OSPF Extensions in Support of GMPLS, RFC4203, 1.3
IS-IS Extensions in Support of GMPLS, RFC5307, 1.4 " IS-IS Extensions in Support of GMPLS, RFC5307, 1.4"
::= { tedSrlgEntry 2 } ::= { tedSrlgEntry 2 }
--
-- Notification Configuration -- Notification Configuration
--
tedStatusChangeNotificationMaxRate OBJECT-TYPE tedStatusChangeNotificationMaxRate OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A lot of notifications relating to the status change are "A lot of notifications relating to the status change are
expected to generate in a node, especially when a network failure expected to generate in a node, especially when a network
occurs and might cause a performance degradation of the node itself. failure occurs and might cause a performance degradation of the
To avoid such a defect, this object provides the maximum number of node itself. To avoid such a defect, this object provides the
notifications generated per minute. If events occur more rapidly, maximum number of notifications generated per minute. If
the implementation may simply fail to emit these notifications during events occur more rapidly, the implementation may simply fail
that period, or may queue them until an appropriate time. A value of to emit these notifications during that period, or may queue
0 means no throttling is applied and events may be notified at the them until an appropriate time. A value of 0 means no
rate at which they occur." throttling is applied and events may be notified at the rate at
which they occur."
DEFVAL {1} DEFVAL {1}
::= { tedObjects 6 } ::= { tedObjects 6 }
tedCreatedDeletedNotificationMaxRate OBJECT-TYPE tedCreatedDeletedNotificationMaxRate OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A lot of notifications relating to new registration in ted "A lot of notifications relating to new registration in ted
table by receiving new TE link information or deletion of existing table by receiving new TE link information or deletion of
entries in ted table are expected to generate in a node. This object existing entries in ted table are expected to generate in a
provides the maximum number of notifications generated per minute. " node. This object provides the maximum number of notifications
generated per minute."
DEFVAL {1} DEFVAL {1}
::= { tedObjects 7 } ::= { tedObjects 7 }
--
-- Notifications -- Notifications
--
tedStatusChange NOTIFICATION-TYPE tedStatusChange NOTIFICATION-TYPE
OBJECTS { OBJECTS {
tedLinkState tedLinkState
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This notification signifies that there has been change in TE "This notification signifies that there has been change in TE
information of tedTable, tedLocalIfAddrTable, tedRemoteIfAddrTable, information of tedTable, tedLocalIfAddrTable,
tedSwCapTable and/or tedSrlgTable. For example, this should be tedRemoteIfAddrTable, tedSwCapTable and/or tedSrlgTable. For
generated when tedUnreservedBandwidth is changed to create or delete example, this should be generated when tedUnreservedBandwidth
LSP using registered TE link. " is changed to create or delete LSP using registered TE link. "
::= { tedNotifications 1 } ::= { tedNotifications 1 }
tedEntryCreated NOTIFICATION-TYPE tedEntryCreated NOTIFICATION-TYPE
OBJECTS { OBJECTS {
tedLinkState tedLinkState
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This notification signifies that there has been new "This notification signifies that there has been new
registration in ted table by receiving new TE link information. For registration in ted table by receiving new TE link information.
example, this should be generated when new index (tedLinkIndex) is For example, this should be generated when new index
registered in TED table." (tedLinkIndex) is registered in TED table."
::= { tedNotifications 2 } ::= { tedNotifications 2 }
tedEntryDeleted NOTIFICATION-TYPE tedEntryDeleted NOTIFICATION-TYPE
OBJECTS { OBJECTS {
tedLinkState tedLinkState
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This notification signifies that there has been deletion of an "This notification signifies that there has been deletion of an
entry in the ted table. For example, this should be generated when entry in the ted table. For example, this should be generated
one of existing entries is deleted in TED table." when one of existing entries is deleted in TED table."
::= { tedNotifications 3 } ::= { tedNotifications 3 }
-- Conformance Statement -- Conformance Statement
tedCompliances tedCompliances
OBJECT IDENTIFIER ::= { tedConformance 1 } OBJECT IDENTIFIER ::= { tedConformance 1 }
tedGroups tedGroups
OBJECT IDENTIFIER ::= { tedConformance 2 } OBJECT IDENTIFIER ::= { tedConformance 2 }
-- Module Compliance -- Module Compliance
skipping to change at page 25, line 11 skipping to change at page 25, line 22
DESCRIPTION DESCRIPTION
"Compliance statement for agents provides full support for the "Compliance statement for agents provides full support for the
TED MIB." TED MIB."
MODULE -- this module MODULE -- this module
MANDATORY-GROUPS { tedMainGroup, MANDATORY-GROUPS { tedMainGroup,
tedObjectsGroup, tedObjectsGroup,
tedNotificationGroup tedNotificationGroup
} }
GROUP tedUnnumberedLinkGroup GROUP tedUnnumberedLinkGroup
DESCRIPTION DESCRIPTION
"This group is mandatory for TE links that supports the "This group is mandatory for TE links that supports the
unnumbered links." unnumbered links."
GROUP tedNumberedLinkGroup GROUP tedNumberedLinkGroup
DESCRIPTION DESCRIPTION
"This group is mandatory for TE links that supports the numbered "This group is mandatory for TE links that supports the
links." numbered links."
GROUP tedSwCapGroup GROUP tedSwCapGroup
DESCRIPTION DESCRIPTION
"This group is mandatory for TE links that supports GMPLS "This group is mandatory for TE links that supports GMPLS
switching capability." switching capability."
GROUP tedSwCapMinLspBandwidthGroup GROUP tedSwCapMinLspBandwidthGroup
DESCRIPTION DESCRIPTION
"This group is mandatory for TE links if the switching "This group is mandatory for TE links if the switching
capability field is TDM, PSC-1, PSC-2, PSC-3, or PSC-4." capability field is TDM, PSC-1, PSC-2, PSC-3, or PSC-4."
GROUP tedSwCapIfMtuGroup GROUP tedSwCapIfMtuGroup
DESCRIPTION DESCRIPTION
"This group is mandatory for TE links that supports the MTU of "This group is mandatory for TE links that supports the MTU of
the local or remote TE link." the local or remote TE link."
GROUP tedSwCapIndicationGroup GROUP tedSwCapIndicationGroup
DESCRIPTION DESCRIPTION
"This group is mandatory for TE links that supports Standard or "This group is mandatory for TE links that supports Standard or
Arbitrary SONET/SDH." Arbitrary SONET/SDH."
GROUP tedSrlgGroup GROUP tedSrlgGroup
DESCRIPTION DESCRIPTION
"This group is mandatory for TE links that supports SRLG "This group is mandatory for TE links that supports SRLG
information." information."
::= { tedCompliances 1 } ::= { tedCompliances 1 }
-- --
-- ReadOnly Compliance -- ReadOnly Compliance
-- --
tedModuleReadOnlyCompliance MODULE-COMPLIANCE tedModuleReadOnlyCompliance MODULE-COMPLIANCE
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Compliance requirement for implementations only provide read- "Compliance requirement for implementations only provide read-
only support for TED. Such devices can then be monitored but cannot only support for TED. Such devices can then be monitored but
be configured using this MIB module." cannot be configured using this MIB module."
MODULE -- this module MODULE -- this module
MANDATORY-GROUPS { tedMainGroup MANDATORY-GROUPS { tedMainGroup
} }
GROUP tedUnnumberedLinkGroup GROUP tedUnnumberedLinkGroup
DESCRIPTION DESCRIPTION
"This group is mandatory for TE links that supports the "This group is mandatory for TE links that supports the
unnumbered links." unnumbered links."
GROUP tedNumberedLinkGroup GROUP tedNumberedLinkGroup
DESCRIPTION DESCRIPTION
"This group is mandatory for TE links that supports the numbered "This group is mandatory for TE links that supports the
links." numbered links."
GROUP tedSwCapGroup GROUP tedSwCapGroup
DESCRIPTION DESCRIPTION
"This group is mandatory for TE links that supports some GMPLS "This group is mandatory for TE links that supports some GMPLS
switching capabilities." switching capabilities."
GROUP tedSwCapMinLspBandwidthGroup GROUP tedSwCapMinLspBandwidthGroup
DESCRIPTION DESCRIPTION
"This group is mandatory for TE links if the switching "This group is mandatory for TE links if the switching
capability field is TDM, PSC-1, PSC-2, PSC-3, or PSC-4." capability field is TDM, PSC-1, PSC-2, PSC-3, or PSC-4."
GROUP tedSwCapIfMtuGroup GROUP tedSwCapIfMtuGroup
DESCRIPTION DESCRIPTION
"This group is mandatory for TE links that supports the MTU of "This group is mandatory for TE links that supports the MTU of
the local or remote TE link." the local or remote TE link."
GROUP tedSwCapIndicationGroup GROUP tedSwCapIndicationGroup
DESCRIPTION DESCRIPTION
"This group is mandatory for TE links that supports Standard or "This group is mandatory for TE links that supports Standard or
Arbitrary SONET/SDH." Arbitrary SONET/SDH."
GROUP tedSrlgGroup GROUP tedSrlgGroup
DESCRIPTION DESCRIPTION
"This group is mandatory for TE links that supports SRLG "This group is mandatory for TE links that supports SRLG
information." information."
::= { tedCompliances 2 } ::= { tedCompliances 2 }
-- Units of conformance -- Units of conformance
tedMainGroup OBJECT-GROUP tedMainGroup OBJECT-GROUP
OBJECTS { OBJECTS {
tedLinkState , tedLinkState ,
tedAreaId , tedAreaId ,
tedLinkType , tedLinkType ,
skipping to change at page 27, line 18 skipping to change at page 27, line 29
tedUnreservedBandwidthPri4 , tedUnreservedBandwidthPri4 ,
tedUnreservedBandwidthPri5 , tedUnreservedBandwidthPri5 ,
tedUnreservedBandwidthPri6 , tedUnreservedBandwidthPri6 ,
tedUnreservedBandwidthPri7 , tedUnreservedBandwidthPri7 ,
tedAdministrativeGroup , tedAdministrativeGroup ,
tedLinkProtectionType , tedLinkProtectionType ,
tedLinkInformationData tedLinkInformationData
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Collection of objects for TED management" "Collection of objects for TED management"
::= { tedGroups 1 } ::= { tedGroups 1 }
tedObjectsGroup OBJECT-GROUP tedObjectsGroup OBJECT-GROUP
OBJECTS { OBJECTS {
tedStatusChangeNotificationMaxRate, tedStatusChangeNotificationMaxRate,
tedCreatedDeletedNotificationMaxRate tedCreatedDeletedNotificationMaxRate
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This objects needed to implement notification." "This objects needed to implement notification."
::= { tedGroups 2 } ::= { tedGroups 2 }
tedNotificationGroup NOTIFICATION-GROUP tedNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS { NOTIFICATIONS {
tedStatusChange, tedStatusChange,
tedEntryCreated, tedEntryCreated,
tedEntryDeleted tedEntryDeleted
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This group is mandatory for those implementations that can "This group is mandatory for those implementations that can
implement the notifications contained in this group. " implement the notifications contained in this group."
::= { tedGroups 3 } ::= { tedGroups 3 }
tedUnnumberedLinkGroup OBJECT-GROUP tedUnnumberedLinkGroup OBJECT-GROUP
OBJECTS { OBJECTS {
tedLocalId, tedLocalId,
tedRemoteId tedRemoteId
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This objects needed to implement the unnumbered links." "This objects needed to implement the unnumbered links."
::= { tedGroups 4 } ::= { tedGroups 4 }
tedNumberedLinkGroup OBJECT-GROUP tedNumberedLinkGroup OBJECT-GROUP
OBJECTS { OBJECTS {
tedLocalIfAddrType, tedLocalIfAddrType,
tedRemoteIfAddrType tedRemoteIfAddrType
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This objects needed to implement the numbered links." "This objects needed to implement the numbered links."
::= { tedGroups 5 } ::= { tedGroups 5 }
tedSwCapGroup OBJECT-GROUP tedSwCapGroup OBJECT-GROUP
OBJECTS { OBJECTS {
tedSwCapType, tedSwCapType,
tedSwCapEncoding, tedSwCapEncoding,
tedSwCapMaxLspBandwidthPri0, tedSwCapMaxLspBandwidthPri0,
tedSwCapMaxLspBandwidthPri1, tedSwCapMaxLspBandwidthPri1,
tedSwCapMaxLspBandwidthPri2, tedSwCapMaxLspBandwidthPri2,
tedSwCapMaxLspBandwidthPri3, tedSwCapMaxLspBandwidthPri3,
tedSwCapMaxLspBandwidthPri4, tedSwCapMaxLspBandwidthPri4,
tedSwCapMaxLspBandwidthPri5, tedSwCapMaxLspBandwidthPri5,
tedSwCapMaxLspBandwidthPri6, tedSwCapMaxLspBandwidthPri6,
tedSwCapMaxLspBandwidthPri7 tedSwCapMaxLspBandwidthPri7
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This objects needed to implement TE links with its GMPLS TE "This objects needed to implement TE links with its GMPLS TE
switching capability information." switching capability information."
::= { tedGroups 6 } ::= { tedGroups 6 }
tedSwCapMinLspBandwidthGroup OBJECT-GROUP tedSwCapMinLspBandwidthGroup OBJECT-GROUP
OBJECTS { OBJECTS {
tedSwCapMinLspBandwidth tedSwCapMinLspBandwidth
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This objects needed to implement the minimum bandwidth of the "This objects needed to implement the minimum bandwidth of the
TE link for GMPLS LSP creation." TE link for GMPLS LSP creation."
::= { tedGroups 7 } ::= { tedGroups 7 }
tedSwCapIfMtuGroup OBJECT-GROUP tedSwCapIfMtuGroup OBJECT-GROUP
OBJECTS { OBJECTS {
tedSwCapIfMtu tedSwCapIfMtu
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This objects needed to implement the MTU information of the "This objects needed to implement the MTU information of the
local or remote TE link." local or remote TE link."
::= { tedGroups 8 } ::= { tedGroups 8 }
tedSwCapIndicationGroup OBJECT-GROUP tedSwCapIndicationGroup OBJECT-GROUP
OBJECTS { OBJECTS {
tedSwCapIndication tedSwCapIndication
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This objects needed to implement the indication whether the "This objects needed to implement the indication whether the
interface supports Standard or Arbitrary SONET/SDH." interface supports Standard or Arbitrary SONET/SDH."
::= { tedGroups 9 } ::= { tedGroups 9 }
tedSrlgGroup OBJECT-GROUP tedSrlgGroup OBJECT-GROUP
OBJECTS { OBJECTS {
tedSrlg tedSrlg
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This objects needed to implement multiple SRLG values with "This objects needed to implement multiple SRLG values with
GMPLS TE information." GMPLS TE information."
::= { tedGroups 10 } ::= { tedGroups 10 }
END END
8. Security Consideration 8. Security Consideration
There is a number of management objects defined in this MIB module There are several objects defined in this MIB module that has a MAX-
that has a MAX-ACCESS clause of read-write. Such objects may be ACCESS clause of read-write. Such objects may be considered sensitive
considered sensitive or vulnerable in some network environments. The or vulnerable in some network environments. The support for SET
support for SET operations in a non-secure environment without proper operations in a non-secure environment without proper protection can
protection can have a negative effect on network operations. have a negative effect on network operations.
Some of the readable objects in this MIB module (i.e., objects with a Some of the readable objects in this MIB module (i.e., objects with a
MAX-ACCESS other than not-accessible) may be considered sensitive or MAX-ACCESS other than not-accessible) may be considered sensitive or
vulnerable in some network environments. It is thus important to vulnerable in some network environments. It is thus important to
control even GET and/or NOTIFY access to these objects and possibly control even GET and/or NOTIFY access to these objects and possibly
to even encrypt the values of these objects when sending them over to even encrypt the values of these objects when sending them over
the network via SNMP. These are the tables and objects and their the network via SNMP. These are the tables and objects and their
sensitivity/vulnerability: tedTable, tedLocalIfAddrTable, sensitivity/vulnerability: tedTable, tedLocalIfAddrTable,
tedRemoteIfAddrTable, tedSwCapTable and tedSrlgTable contain topology tedRemoteIfAddrTable, tedSwCapTable and tedSrlgTable contain topology
information for the MPLS/GMPLS network. If an administrator does not information for the MPLS/GMPLS network. If an administrator does not
skipping to change at page 29, line 49 skipping to change at page 30, line 7
these objects could cause the management agent, the network, or the these objects could cause the management agent, the network, or the
router to become overloaded with Notifications in cases of high churn router to become overloaded with Notifications in cases of high churn
within the network. within the network.
SNMP versions prior to SNMPv3 did not include adequate security. Even SNMP versions prior to SNMPv3 did not include adequate security. Even
if the network itself is secure (for example by using IPsec), even if the network itself is secure (for example by using IPsec), even
then, there is no control as to who on the secure network is allowed then, there is no control as to who on the secure network is allowed
to access and GET/SET (read/change/create/delete) the objects in this to access and GET/SET (read/change/create/delete) the objects in this
MIB module. MIB module.
It is RECOMMENDED that implementers consider the security features as Implementations MUST provide the security features described by the
provided by the SNMPv3 framework (see [RFC3410], section 8), SNMPv3 framework (see [RFC3410]), including full support for
including full supports for the SNMPv3 cryptographic mechanisms (for authentication and privacy via the User-based Security Model (USM)
authentication and privacy). [RFC3414] with the AES cipher algorithm [RFC3826]. Implementations
MAY also provide support for the Transport Security Model (TSM)
[RFC5591] in combination with a secure transport such as SSH
[RFC5592] or TLS/DTLS [RFC6353].
Further, deployment of SNMP versions prior to SNMPv3 is NOT Further, deployment of SNMP versions prior to SNMPv3 is NOT
RECOMMENDED. Instead, it is RECOMMENDED to deploy SNMPv3 and to RECOMMENDED. Instead, it is RECOMMENDED to deploy SNMPv3 and to
enable cryptographic security. It is then a customer/operator enable cryptographic security. It is then a customer/operator
responsibility to ensure that the SNMP entity giving access to an responsibility to ensure that the SNMP entity giving access to an
instance of this MIB module is properly configured to give access to instance of this MIB module is properly configured to give access to
the objects only to those principles (users) that have legitimate the objects only to those principles (users) that have legitimate
rights to indeed GET or SET (change/create/delete) them. rights to indeed GET or SET (change/create/delete) them.
9. IANA Considerations 9. IANA Considerations
The following "IANA Considerations" subsection requests IANA for a The following "IANA Considerations" subsection requests IANA for a
new assignment under the transmission subtree. New assignments can new assignment under the transmission subtree. New assignments can
only be made via a Standards Action as specified in [RFC5226]. only be made via a Standards Action as specified in [RFC5226].
9.1 IANA Considerations for TED-MIB 9.1 IANA Considerations for TED-MIB
The IANA is requested to assign {transmission XXX } to the TED-MIB The IANA is requested to assign {transmission yyy} to the TED-MIB
module specified in this document. module specified in this document.
10. References 10. References
10.1 Normative References 10.1 Normative References
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119, March 1997. Requirement Levels", BCP 14, RFC 2119, March 1997.
[RFC2328] J. Moy, " OSPF version2 ", RFC2328, April 1998. [RFC2328] J. Moy, " OSPF version2 ", RFC2328, April 1998.
[RFC2578] McCloghrie, K., Perkins, D., and J. Schoenwaelder, [RFC2578] McCloghrie, K., Perkins, D., and J. Schoenwaelder,
"Structure of Management Information Version 2 (SMIv2)", "Structure of Management Information Version 2 (SMIv2)",
STD 58, RFC 2578, April 1999. STD 58, RFC 2578, April 1999.
skipping to change at page 31, line 22 skipping to change at page 31, line 29
[RFC5340] R. Coltun, D. Ferguson, J. Moy, A.Lindem " OSPF for IPv6", [RFC5340] R. Coltun, D. Ferguson, J. Moy, A.Lindem " OSPF for IPv6",
RFC5340, July 2008. RFC5340, July 2008.
[RFC5643] Dan Joyal, et al, "Management Information Base for OSPFv3 [RFC5643] Dan Joyal, et al, "Management Information Base for OSPFv3
", RFC5643, August 2009. ", RFC5643, August 2009.
[RFC6340] R. Presuhn, "Textual Conventions for the Representation of [RFC6340] R. Presuhn, "Textual Conventions for the Representation of
Floating-point Number ", RFC6340, August 2011. Floating-point Number ", RFC6340, August 2011.
[ISO10589] ISO 10589, "Intermediate system to Intermediate system
routeing information exchange protocol for use in
conjunction with the Protocol for providing the
Connectionless-mode Network Service (ISO 8473)", ISO/IEC
10589:2002.
10.2 Informative References 10.2 Informative References
[RFC3410] J. Case, R. Mundy, D. pertain, B.Stewart, "Introduction [RFC3410] J. Case, R. Mundy, D. pertain, B.Stewart, "Introduction
and Applicability Statement for Internet Standard and Applicability Statement for Internet Standard
Management Framework", RFC 3410, Dec. 2002. Management Framework", RFC 3410, Dec. 2002.
[RFC3414] Blumenthal, U. and B. Wijnen, "User-based Security Model
(USM) for version 3 of the Simple Network Management
Protocol (SNMPv3)", STD 62, RFC 3414, December 2002.
[RFC3812] Srinivasan, C., Viswanathan, A., and T. D. Nadeau, [RFC3812] Srinivasan, C., Viswanathan, A., and T. D. Nadeau,
"Multiprotocol Label Switching (MPLS) Traffic Engineering "Multiprotocol Label Switching (MPLS) Traffic Engineering
(TE) Management Information Base (MIB)", RFC 3812, June (TE) Management Information Base (MIB)", RFC 3812, June
2004. 2004.
[RFC3813] Srinivasan, C., Viswanathan, A., and T. D. Nadeau, [RFC3813] Srinivasan, C., Viswanathan, A., and T. D. Nadeau,
"Multiprotocol Label Switching (MPLS) Label Switching "Multiprotocol Label Switching (MPLS) Label Switching
(LSR) Router Management Information Base (MIB)", RFC 3813, (LSR) Router Management Information Base (MIB)", RFC 3813,
June 2004. June 2004.
[RFC3826] Blumenthal, U., Maino, F., and K. McCloghrie, "The
Advanced Encryption Standard (AES) Cipher Algorithm in the
SNMP User-based Security Model", RFC 3826, June 2004.
[RFC3945] E. Mannie, "Generalized Multi-Procol Label Switching [RFC3945] E. Mannie, "Generalized Multi-Procol Label Switching
(MPLS) Architecture", RFC3945, Oct. 2004. (MPLS) Architecture", RFC3945, Oct. 2004.
[RFC4202] K. Kompella, and Y. Rekhter, "Routing Extensions in [RFC4202] K. Kompella, and Y. Rekhter, "Routing Extensions in
Support of Generalized Multi-Protocol Label Switching", Support of Generalized Multi-Protocol Label Switching",
RFC4202, Oct. 2005. RFC4202, Oct. 2005.
[RFC4220] M. Dubuc, T. D. Nadeau and J. Lang, " Traffic Engineering [RFC4220] M. Dubuc, T. D. Nadeau and J. Lang, "Traffic Engineering
Link Management Information Base ", RFC4220, Dec. 2005. Link Management Information Base", RFC4220, Dec. 2005.
[RFC4377] T. D. Nadeau, et al, "Operations and Management (OAM) [RFC4377] T. D. Nadeau, et al, "Operations and Management (OAM)
Requirements for Multi-Protocol Label Switched (MPLS) Requirements for Multi-Protocol Label Switched (MPLS)
Networks", RFC 4377, February 2006. Networks", RFC 4377, February 2006.
[RFC4444] T. Parker, et al, "Management Information Base for [RFC4444] T. Parker, et al, "Management Information Base for
Intermediate System to Intermediate System (IS-IS)", RFC Intermediate System to Intermediate System (IS-IS)", RFC
4444, April 2006. 4444, April 2006.
[RFC4802] T. D. Nadeau and A. Farrel, "Generalized Multiprotocol [RFC4802] T. D. Nadeau and A. Farrel, "Generalized Multiprotocol
skipping to change at page 32, line 24 skipping to change at page 32, line 35
Label Switching (GMPLS) Label Switching Router (LSR) Label Switching (GMPLS) Label Switching Router (LSR)
Management Information Base", RFC4803, Feb., 2007. Management Information Base", RFC4803, Feb., 2007.
[RFC5305] H. Smit and T. Li, "IS-IS extensions for Traffic [RFC5305] H. Smit and T. Li, "IS-IS extensions for Traffic
Engineering", RFC 5305, Oct. 2008. Engineering", RFC 5305, Oct. 2008.
[RFC5307] K. Kompella, and Y. Rekhter, "IS-IS Extensions in Support [RFC5307] K. Kompella, and Y. Rekhter, "IS-IS Extensions in Support
of Generalized Multi-Protocol Label Switching (GMPLS)", of Generalized Multi-Protocol Label Switching (GMPLS)",
RFC5307, Oct. 2008. RFC5307, Oct. 2008.
[RFC5226] Narten, T. and H. Alvestrand., " Guidelines for Writing an [RFC5226] Narten, T. and H. Alvestrand., "Guidelines for Writing an
IANA Considerations Section in RFCs" BCP 26, RFC 5226, May IANA Considerations Section in RFCs" BCP 26, RFC 5226, May
2008. 2008.
11. Acknowledgment [RFC5591] Harrington, D. and W. Hardaker, "Transport Security Model
for the Simple Network Management Protocol (SNMP)", RFC
5591, June 2009.
[RFC5592] Harrington, D., Salowey, J., and W. Hardaker, "Secure
Shell Transport Model for the Simple Network Management
Protocol (SNMP)", RFC 5592, June 2009.
[RFC6353] Hardaker, W., "Transport Layer Security (TLS) Transport
Model for the Simple Network Management Protocol (SNMP)",
RFC 6353, July 2011.
[ISO10589] ISO 10589, "Intermediate system to Intermediate system
routeing information exchange protocol for use in
conjunction with the Protocol for providing the
Connectionless-mode Network Service (ISO 8473)", ISO/IEC
10589:2002.
11. Acknowledgment
The authors wish to acknowledge and thank the following individuals The authors wish to acknowledge and thank the following individuals
for their valuable comments to this document: Ken Nagami, Shuichi for their valuable comments to this document: Ken Nagami, Shuichi
Okamoto, Adrian Farrel, Diego Caviglia and Acee Lindem. Okamoto, Adrian Farrel, Diego Caviglia and Acee Lindem.
12. Authors' Addresses 12. Authors' Addresses
Tomohiro Otani Tomohiro Otani
KDDI Corporation KDDI Corporation
KDDI Bldg, KDDI Bldg,
2-3-2, Nishishinjuku, Shinjuku-ku, Tokyo, 2-3-2, Nishishinjuku, Shinjuku-ku, Tokyo, 163-8003, Japan
163-8003, Japan
Email: tm-otani@kddi.com Email: tm-otani@kddi.com
Masanori Miyazawa Masanori Miyazawa
KDDI R&D Laboratories, Inc. KDDI R&D Laboratories, Inc.
2-1-15 Ohara Fujimino, Saitama, 2-1-15 Ohara Fujimino, Saitama, 356-8502, Japan.
356-8502, Japan.
Email: ma-miyazawa@kddilabs.jp Email: ma-miyazawa@kddilabs.jp
Thomas D. Nadeau Thomas D. Nadeau
Email: tnadeau@lucidvision.com Email: tnadeau@lucidvision.com
Kenji Kumaki Kenji Kumaki
KDDI Corporation KDDI Corporation
Garden Air Tower Garden Air Tower
Iidabashi, Chyoda-ku, Tokyo, Iidabashi, Chyoda-ku, Tokyo, 102-8460, Japan
102-8460, Japan
Email: ke-kumaki@kddi.com Email: ke-kumaki@kddi.com
 End of changes. 195 change blocks. 
424 lines changed or deleted 470 lines changed or added

This html diff was produced by rfcdiff 1.41. The latest version is available from http://tools.ietf.org/tools/rfcdiff/