CoRE                                                           Z. Shelby
Internet-Draft                                                 Sensinode
Intended status: Standards Track                            May 23,                            June 1, 2012
Expires: November 24, December 3, 2012

                            CoRE Link Format


   This specification defines Web Linking using a link format for use by
   constrained web servers to describe hosted resources, their
   attributes and other relationships between links.  Based on the HTTP
   Link Header field defined in RFC5988, the CoRE Link Format is carried
   as a payload and is assigned an Internet media type.  A well-known
   URI is defined as a default entry-point for requesting the links
   hosted by a server.

Status of this Memo

   This Internet-Draft is submitted in full conformance with the
   provisions of BCP 78 and BCP 79.

   Internet-Drafts are working documents of the Internet Engineering
   Task Force (IETF).  Note that other groups may also distribute
   working documents as Internet-Drafts.  The list of current Internet-
   Drafts is at

   Internet-Drafts are draft documents valid for a maximum of six months
   and may be updated, replaced, or obsoleted by other documents at any
   time.  It is inappropriate to use Internet-Drafts as reference
   material or to cite them other than as "work in progress."

   This Internet-Draft will expire on November 24, December 3, 2012.

Copyright Notice

   Copyright (c) 2012 IETF Trust and the persons identified as the
   document authors.  All rights reserved.

   This document is subject to BCP 78 and the IETF Trust's Legal
   Provisions Relating to IETF Documents
   ( in effect on the date of
   publication of this document.  Please review these documents
   carefully, as they describe your rights and restrictions with respect
   to this document.  Code Components extracted from this document must
   include Simplified BSD License text as described in Section 4.e of
   the Trust Legal Provisions and are provided without warranty as
   described in the Simplified BSD License.

Table of Contents

   1.  Introduction . . . . . . . . . . . . . . . . . . . . . . . . .  3
     1.1.  Web Linking in CoRE  . . . . . . . . . . . . . . . . . . .  3
     1.2.  Use Cases  . . . . . . . . . . . . . . . . . . . . . . . .  4
       1.2.1.  Discovery  . . . . . . . . . . . . . . . . . . . . . .  4
       1.2.2.  Resource Collections . . . . . . . . . . . . . . . . .  5
       1.2.3.  Resource Directory . . . . . . . . . . . . . . . . . .  5
     1.3.  Terminology  . . . . . . . . . . . . . . . . . . . . . . .  5
   2.  Link Format  . . . . . . . . . . . . . . . . . . . . . . . . .  6
     2.1.  Target and context URIs  . . . . . . . . . . . . . . . . .  9
     2.2.  Link relations . . . . . . . . . . . . . . . . . . . . . .  9
     2.3.  Use of anchors . . . . . . . . . . . . . . . . . . . . . .  9
   3.  CoRE link attributes . . . . . . . . . . . . . . . . . . . . .  9
     3.1.  Resource type 'rt' attribute . . . . . . . . . . . . . . . 10
     3.2.  Interface description 'if' attribute . . . . . . . . . . . 10
     3.3.  Maximum size estimate 'sz' attribute . . . . . . . . . . . 11
   4.  Well-known Interface . . . . . . . . . . . . . . . . . . . . . 11
     4.1.  Query Filtering  . . . . . . . . . . . . . . . . . . . . . 12
   5.  Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
   6.  Security Considerations  . . . . . . . . . . . . . . . . . . . 15
   7.  IANA Considerations  . . . . . . . . . . . . . . . . . . . . . 16
     7.1.  Well-known 'core' URI  . . . . . . . . . . . . . . . . . . 16
     7.2.  New 'hosts' relation type  . . . . . . . . . . . . . . . . 16
     7.3.  New link-format Internet media type  . . . . . . . . . . . 16 17
     7.4.  Constrained RESTful Environments (CORE) Parameters
           Registry . . . . . . . . . . . . . . . . . . . . . . . . . 17 18
   8.  Acknowledgments  . . . . . . . . . . . . . . . . . . . . . . . 19
   9.  Changelog  . . . . . . . . . . . . . . . . . . . . . . . . . . 19 20
   10. References . . . . . . . . . . . . . . . . . . . . . . . . . . 23 24
     10.1. Normative References . . . . . . . . . . . . . . . . . . . 23 24
     10.2. Informative References . . . . . . . . . . . . . . . . . . 24
   Author's Address . . . . . . . . . . . . . . . . . . . . . . . . . 25

1.  Introduction

   The Constrained RESTful Environments (CoRE) working group aims at
   realizing realizes the
   Representational State Transfer (REST) architecture [REST] in a
   suitable form for the most constrained nodes (e.g. 8-bit
   microcontrollers with limited memory) and networks (e.g. 6LoWPAN
   [RFC4919]).  CoRE is aimed at Machine-to-Machine (M2M) applications
   such as smart energy and building automation.

   The discovery of resources hosted by a constrained server is very
   important in machine-to-machine applications where there are no
   humans in the loop and static interfaces result in fragility.  The
   discovery of resources provided by an HTTP [RFC2616] Web Server is
   typically called Web Discovery and the description of relations
   between resources is called Web Linking [RFC5988].  In the present
   specification we refer to the discovery of resources hosted by a
   constrained web server, their attributes and other resource relations
   as CoRE Resource Discovery.

   The main function of such a discovery mechanism is to provide
   Universal Resource Identifiers (URIs, called links) for the resources
   hosted by the server, complemented by attributes about those
   resources and possible further link relations.  In CoRE this
   collection of links is carried as a resource of its own (as opposed
   to HTTP headers delivered with a specific resource).  This document
   specifies a link format for use in CoRE Resource Discovery by
   extending the HTTP Link Header format [RFC5988] to describe these
   link descriptions.  The CoRE Link Format is carried as a payload and
   is assigned an Internet media type.  A well-known relative URI
   "/.well-known/core" is defined as a default entry-point for
   requesting the list of links about resources hosted by a server, and
   thus performing CoRE Resource Discovery.  This specification is
   applicable for use with CoAP Constrained Application Protocol (CoAP)
   [I-D.ietf-core-coap], HTTP or any other suitable web transfer
   protocol.  The link format can also be saved in file format.

1.1.  Web Linking in CoRE

   Technically the CoRE Link Format is a serialization of a typed link
   as specified in [RFC5988], used to describe relationships between
   resources, so-called "Web Linking".  In this specification Web
   Linking is extended with specific constrained M2M attributes, links
   are carried as a message payload rather than in an HTTP Link Header
   field, and a default interface is defined to discover resources
   hosted by a server.  This specification also defines a new relation
   type "hosts" (from the verb "to host"), which indicates that the
   resource is hosted by the server from which the link document was

   In HTTP, the Link Header can be used to carry link information about
   a resource along with an HTTP response.  This works well for the
   typical use case for a web server and browser, where further
   information about a particular resource is useful after accessing it.
   In CoRE the main use case for Web Linking is the discovery of which
   resources a server hosts in the first place.  Although some resources
   may have further links associated with them, this is expected to be
   an exception.  For that reason the CoRE Link Format serialization is
   carried as a resource representation of a well-known URI.  The CoRE
   Link Format does re-use the format of the HTTP Link Header
   serialization defined in [RFC5988].

1.2.  Use Cases

   Typical use cases for Web Linking on today's web include e.g.
   describing the author of a web page or describing relations between
   web pages (next chapter, previous chapter etc.).  Web Linking can
   also be applied to M2M applications, where typed links are used to
   assist a machine client in finding and understanding how to use
   resources on a server.  In this section a few use cases are described
   for how the CoRE Link Format could be used in M2M applications.  For
   further technical examples see Section 5.  As there are a large range
   of M2M applications, these use cases are purposely generic.  This
   specification assumes that different deployments or application
   domains will define the appropriate REST Interface Descriptions along
   with Resource Types to make discovery meaningful.

1.2.1.  Discovery

   In M2M applications, for example home or building automation, there
   is a need for local clients and servers to find and interact with
   each other without human intervention.  The CoRE Link Format can be
   used by servers in such environments to enable Resource Discovery of
   the resources hosted by the server.

   Resource Discovery can be performed either unicast or multicast.
   When a server's IP address is already known, either a priori or
   resolved via the Domain Name System (DNS) [RFC1034][RFC1035], unicast
   discovery is performed in order to locate the entry point to the
   resource of interest.  In this specification, this is performed using
   a GET to "/.well-known/core" on the server, which returns a payload
   in the CoRE Link Format.  A client would then match the appropriate
   Resource Type, Interface Description and possible Media type
   [RFC2045] for its application.  These attributes may also be included
   in the query string in order to filter the number of links returned
   in a response.

   Multicast resource discovery is useful when a client needs to locate
   a resource within a limited scope, and that scope supports IP
   multicast.  A GET request to the appropriate multicast address is
   made for "/.well-known/core".  In order to limit the number and size
   or responses, a query string is recommended with the known
   attributes.  Typically a resource would be discovered based on its
   Resource Type and/or Interface Description, along with possible
   application specific attributes.

1.2.2.  Resource Collections

   RESTful designs of M2M interfaces often make use of collections of
   resources.  For example an index of temperature sensors on a data
   collection node or a list of alarms on a home security controller.
   The CoRE Link Format can be used to make it possible to find the
   entry point to a collection and traverse its members.  The entry
   point of a collection would always be included in "/.well-known/core"
   to enable its discovery.  The members of the collection can be
   defined either through the Interface Description of the resource
   along with a parameter resource for the size of the collection, or by
   using the link format to describe each resource in the collection.
   These links could be located under "/.well-known/core" or hosted for
   example in the root resource of the collection.

1.2.3.  Resource Directory

   In many deployment scenarios, for example constrained networks with
   sleeping servers, or large M2M deployments with bandwidth limited
   access networks, it makes sense to deploy resource directory entities
   which store links to resources stored on other servers.  Think of
   this as a limited search engine for constrained M2M resources.

   The CoRE Link Format can be used by a server to register resources
   with a resource directory, or to allow a resource directory to poll
   for resources.  Resource registration can be achieved by having each
   server POST their resources to "/.well-known/core" on the resource
   directory.  This in turn adds links to the resource directory under
   an appropriate resource.  These links can then be discovered by any
   client by making a request to a resource directory lookup interface.

1.3.  Terminology

   The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
   specification are to be interpreted as described in [RFC2119].

   This specification makes use of the Augmented Backus-Naur Form (ABNF)
   [RFC5234] notation, including the core rules defined in Appendix A of
   that document.

   This specification requires readers to be familiar with all the terms
   and concepts that are discussed in [RFC5988] and [RFC6454].  In
   addition, this specification makes use of the following terminology:

   Web Linking
      A framework for indicating the relationships between web

      Also called "typed links" in RFC5988.  A link is a typed
      connection between two resources identified by URIs.  Made up of a
      context URI, a link relation type, a target URI, and optional
      target attributes.

   Link Format
      A particular serialization of typed links.

   CoRE Link Format
      A particular serialization of typed links based on the HTTP Link
      Header field serialization defined in Section 5 of RFC5988, but
      carried as a resource representation with a media type.

      Properly called "Target Attribute" in RFC5988.  A key/value pair
      that describes the link or its target.

   CoRE Resource Discovery
      When a client discovers the list of resources hosted by a server,
      their attributes and other link relations by accessing "/.well-

2.  Link Format

   The CoRE Link Format extends the HTTP Link Header field specified in
   [RFC5988].  The format does not require special XML or binary
   parsing, is fairly compact, and is extensible - all important
   characteristics for CoRE.  It should be noted that this link format
   is just one serialization of typed links defined in [RFC5988], others
   include HTML link, Atom feed links [RFC4287] or HTTP Link Header
   fields.  It is expected that resources discovered in the CoRE Link
   Format may also be made available in alternative formats on the
   greater Internet.  The CoRE Link Format is only expected to be
   supported in constrained networks and M2M systems.

   Section 5 of [RFC5988] did not require an Internet media type for the
   defined link format, as it was defined to be carried in an HTTP
   header.  This specification thus defines the Internet media type
   "application/link-format" for the CoRE Link Format (see Section 7.3).
   Whereas the HTTP Link Header field depends on [RFC2616] for its
   encoding, the CoRE Link Format is encoded as UTF-8 [RFC3629].  A
   decoder of the format is not expected to (but not prohibited from)
   validate UTF-8 encoding and doesn't need to perform any UTF-8
   normalization.  UTF-8 data can be compared bit-wise, which allows
   values to contain UTF-8 data without any added complexity for
   constrained nodes.

   The CoRE link format is equivalent to the [RFC5988] link format,
   however the ABNF in the present specification is repeated with
   improvements to be compliant with [RFC5234] and includes new link
   parameters.  The link parameter "href" is reserved for use as a query
   parameter for filtering in this specification (see Section 4.1), and
   MUST NOT be defined as a link parameter.  As in [RFC5988], multiple
   link descriptions are separated by commas.  Note that commas can also
   occur in quoted strings and URIs but do not end a description.  In
   order to convert an HTTP Link Header field to this link format, first
   the "Link:" HTTP header is removed, any LWS is removed, the header
   value is converted to UTF-8 and any percent-encodings decoded.

    Link            = link-value-list
    link-value-list = [ link-value *[ "," link-value ]]
    link-value     = "<" URI-Reference ">" *( ";" link-param )
    link-param     = ( ( "rel" "=" relation-types )
                   / ( "anchor" "=" DQUOTE URI-Reference DQUOTE )
                   / ( "rev" "=" relation-types )
                   / ( "hreflang" "=" Language-Tag )
                   / ( "media" "=" ( MediaDesc
                          / ( DQUOTE MediaDesc DQUOTE ) ) )
                   / ( "title" "=" quoted-string )
                   / ( "title*" "=" ext-value )
                   / ( "type" "=" ( media-type / quoted-mt ) )
                   / ( "rt" "=" relation-types )
                   / ( "if" "=" relation-types )
                   / ( "sz" "=" cardinal )
                   / ( link-extension ) )
    link-extension = ( parmname [ "=" ( ptoken / quoted-string ) ] )
                   / ( ext-name-star "=" ext-value )
    ext-name-star  = parmname "*" ; reserved for RFC2231-profiled
                                  ; extensions.  Whitespace NOT
                                  ; allowed in between.
    ptoken         = 1*ptokenchar
    ptokenchar     = "!" / "#" / "$" / "%" / "&" / "'" / "("
                   / ")" / "*" / "+" / "-" / "." / "/" / DIGIT
                   / ":" / "<" / "=" / ">" / "?" / "@" / ALPHA
                   / "[" / "]" / "^" / "_" / "`" / "{" / "|"
                   / "}" / "~"
    media-type     = type-name "/" subtype-name
    quoted-mt      = DQUOTE media-type DQUOTE
    relation-types = relation-type
                   / DQUOTE relation-type *( 1*SP relation-type ) DQUOTE
    relation-type  = reg-rel-type / ext-rel-type
    reg-rel-type   = LOALPHA *( LOALPHA / DIGIT / "." / "-" )
    ext-rel-type   = URI
    cardinal       = "0" / ( %x31-39 *DIGIT )
    LOALPHA        = %x61-7A   ; a-z
    quoted-string  = <defined in RFC2616>
    URI            = <defined in RFC3986>
    URI-Reference  = <defined in RFC3986>
    type-name      = <defined in RFC4288>
    subtype-name   = <defined in RFC4288>
    MediaDesc      = <defined in W3C.REC-html401-19991224>
    Language-Tag   = <defined in RFC5646>
    ext-value      = <defined in RFC5987>
    parmname       = <defined in RFC5987>

2.1.  Target and context URIs

   Each link conveys one target URI as a URI-reference inside angle
   brackets ("<>").  The context URI of a link (also called base URI in
   [RFC3986]) is determined by the following rules in this

   (a)  The context URI is set to the anchor parameter, when specified,

   (b)  Origin of the target URI, when specified

   (c)  Origin of the link format document's resource's base URI.

2.2.  Link relations

   Since links in the CoRE Link Format are typically used to describe
   resources hosted by a server, and thus in the absence of the relation
   parameter the new relation type "hosts" is assumed (see Section 7.2).
   The "hosts" relation type (from the verb "to host") indicates that
   the target URI is a resource hosted by the server (i.e. server hosts
   resource) indicated by the context URI.  The target URI MUST be a
   relative URI of the context URI for this relation type.

   To express other relations, links can make use of any registered
   relation by including the relation parameter.  The context of a
   relation can be defined using the anchor parameter.  In this way,
   relations between resources hosted on a server, or between hosted
   resources and external resources can be expressed.

2.3.  Use of anchors

   As per Section 5.2 of [RFC5988] a link description MAY include an
   "anchor" attribute, in which case the context is the URI included in
   that attribute.  This is used to describe a relationship between two
   resources.  A consuming implementation can however choose to ignore
   such links.  It is not expected that all implementations will be able
   to derive useful information from explicitly anchored links.

3.  CoRE link attributes

   The following CoRE specific target attributes are defined in addition
   to those already defined in [RFC5988].  These attributes describe
   information useful in accessing the target link of the relation, and
   in some cases can use the syntactical form of a URI.  Such a URI MAY
   be dereferenced (for instance to obtain a description of the link
   relation), but that this is not part of the protocol and MUST NOT be
   done automatically on link evaluation.  When attributes values are
   compared, they MUST be compared as strings.

3.1.  Resource type 'rt' attribute

   The resource type "rt" attribute is an opaque string used to assign
   an application specific semantic type to a resource.  One can think
   of this as a noun describing the resource.  In the case of a
   temperature resource this could be e.g. an application-specific
   semantic type like "outdoor-temperature" or a URI referencing a
   specific concept in an ontology like
   "".  Multiple
   resource types MAY be included in the value of this parameter, each
   separated by a space, similar to the relation attribute.  The
   registry for Resource Type values is defined in Section 7.4.

   The resource type attribute is not meant to used to assign a human
   readable name to a resource.  The "title" attribute defined in
   [RFC5988] is meant for that purpose.  The resource type attribute
   MUST NOT appear more than once in a link.

3.2.  Interface description 'if' attribute

   The Interface Description "if" attribute is an opaque string used to
   provide a name or URI indicating a specific interface definition used
   to interact with the target resource.  One can think of this as
   describing verbs usable on a resource.  The Interface Description
   attribute is meant to describe the generic REST interface to interact
   with a resource or a set of resources.  It is expected that an
   Interface Description will be re-used by different resource types.
   For example the resource types "outdoor-temperature", "dew-point" and
   "rel-humidity" could all be accessible using the interface
   description "".  Multiple
   interface descriptions MAY be included in the value of this
   parameter, each separated by a space, similar to the relation
   attribute.  The registry for Interface Description values is defined
   in Section 7.4.

   The Interface Description could be for example the URI of a Web
   Application Description Language (WADL) [WADL] definition of the
   target resource "", a URN
   indicating the type of interface to the resource "urn:myapp:sensor",
   or an application-specific name "Sensor".  The Interface Description
   attribute MUST NOT appear more than once in a link.

3.3.  Maximum size estimate 'sz' attribute

   The maximum size estimate attribute "sz" gives an indication of the
   maximum size of the resource representation returned by performing a
   GET on the target URI.  For links to CoAP resources this attribute is
   not expected to be included for small resources that can comfortably
   be carried in a single Maximum Transmission Unit (MTU), but SHOULD be
   included for resources larger than that.  The maximum size estimate
   attribute MUST NOT appear more than once in a link.

   Note that there is no defined upper limit to the value of the sz
   attributes.  Implementations MUST be prepared to accept large values.
   One implementation strategy is to convert any value larger than a
   reasonable size limit for this implementation to a special value
   "Big", which in further processing would indicate that a size value
   was given that was so big that it cannot be processed by this

4.  Well-known Interface

   Resource discovery in CoRE is accomplished through the use of a well-
   known resource URI which returns a list of links about resources
   hosted by that server and other link relations.  Well-known resources
   have a path component that begins with "/.well-known/" as specified
   in [RFC5785].  This specification defines a new well-known resource
   for CoRE Resource Discovery "/.well-known/core".

   A server implementing this specification MUST support this resource
   on the default port appropriate for the protocol for the purpose of
   resource discovery.  It is however up to the application which links
   are included and how they are organized.  The resource "/.well-known/
   core" is meant to be used to return links to the entry points of
   resource interfaces on a server.  More sophisticated link
   organization can be achieved by including links to CoRE Link Format
   resources located elsewhere on the server, for example to achieve an
   index.  In the absence of any links, a zero-length payload is
   returned.  The resource representation of this resource MUST be the
   CoRE Link Format described in Section 2.

   The CoRE resource discovery interface supports the following

   o  Performing a GET on "/.well-known/core" to the default port
      returns a set of links available from the server (if any) in the
      CoRE Link Format.  These links might describe resources hosted on
      that server, on other servers, or express other kinds of link
      relations as described in Section 2.

   o  Filtering may be performed on any of the link format attributes
      using a query string as specified in Section 4.1.  For example
      [GET /.well-known/core?rt=temperature-c] would request resources
      with the resource type TemperatureC.  A server is not however
      required to support filtering.

   o  More capable servers such as proxies could support a resource
      directory by requesting the resource descriptions of other end-
      points or allowing servers to POST requests to "/.well-known/
      core".  The details of such resource directory functionality is
      however out of scope for this specification, and is expected to be
      specified separately.

4.1.  Query Filtering

   A server implementing this specification MAY recognize the query part
   of a resource discovery URI as a filter on the resources to be
   returned.  The path and query components together should conform to
   the following level-4 URI Template [RFC6570]


   where the variable "search" is a 1-element list that has a single
   name/value pair, where

   o  name is either "href", a link-param name defined in this
      specification, or any other link-extension name, and

   o  value is either a Complete Value String that does not end in a "*"
      (%2A), or a Prefix Value String followed by a "*" (%2A).

   The search name "href" refers to the URI-reference between the "<"
   and ">" characters of a link.  Both Value Strings match a target
   attribute only if it exists.  Value Strings are percent-decoded
   ([RFC3986] section 2.1) before matching; similarly, any target
   attributes notated as quoted-string are interpreted as defined in
   section 2.2 of [RFC2616].  After these steps, a Complete Value String
   matches a target attribute if it is bitwise identical.  A Prefix
   Value String matches a target attribute if is is a bitwise prefix of
   the target attribute (where any string is a prefix of itself).  Empty
   prefix value strings are allowed, by the definition above they match
   any target attribute that does exist.  Note that relation-type target
   attributes can contain multiple values, and each value MUST be
   treated as a separate target attribute when matching.

   It is not expected that very constrained nodes support filtering.

   Implementations not supporting filtering MUST simply ignore the query
   string and return the whole resource for unicast requests.

   When using a transfer protocol like the Constrained Application
   Protocol (CoAP) that supports multicast requests, special care needs
   to be taken.  A multicast request with a query string SHOULD NOT be
   responded to if filtering is not supported or if the filter does not
   match (to avoid a needless response storm).  The exception is in
   cases where the IP stack interface is not able to indicate that the
   destination address was multicast.

   The following are examples of valid query URIs:

   o  ?href=/foo matches a link-value that is anchored at /foo

   o  ?href=/foo* matches a link-value that is anchored at a URI that
      starts with /foo

   o  ?foo=bar matches a link value that has a target attribute named
      foo with the exact value bar

   o  ?foo=bar* matches a link value that has a target attribute named
      foo the value of which starts with bar, e.g., bar or barley

   o  ?foo=* matches a link value that has a target attribute named foo

5.  Examples

   A few examples of typical link descriptions in this format follows.
   Multiple resource descriptions in a representation are separated by
   commas.  Linefeeds are also included in these examples for
   readability.  Although the following examples use CoAP response
   codes, the examples are applicable to HTTP as well (the corresponding
   response code would be 200 OK).

   This example includes links to two different sensors sharing the same
   Interface Description.  Note that the default relation type for this
   link format is "hosts" in links with no rel= target attribute.  Thus
   the links in this example tell that the Origin server /.well-known/
   core was requested from (the context) hosts the resources /sensors/
   temp and /sensors/light (each a target).

   REQ: GET /.well-known/core

   RES: 2.05 Content
   Without the linefeeds inserted here for readability, the format
   actually looks as follows.


   This example arranges link descriptions hierarchically, with the
   entry point including a link to a sub-resource containing links about
   the sensors.

   REQ: GET /.well-known/core

   RES: 2.05 Content

   REQ: GET /sensors

   RES: 2.05 "Content" Content

   An example query filter may look like:

   REQ: GET /.well-known/core?rt=light-lux

   RES: 2.05 "Content" Content

   Note that relation-type attributes like rt=, if= and rel= can have
   multiple values separated by spaces.  A query filter parameter can
   match any one of those values, as in this example:

   REQ: GET /.well-known/core?rt=light-lux

   RES: 2.05 Content
   </sensors/light>;rt="light-lux core.sen-light";if="sensor"

   This example shows the use of an anchor attribute to relate the
   temperature sensor resource to an external description and to an
   alternative URI.

   REQ: GET /.well-known/core

   RES: 2.05 "Content" Content
   </sensors>;ct=40;title="Sensor Index",

   If a client is interested to find relations about a particular
   resource, it can perform a query on the anchor parameter:

   REQ: GET /.well-known/core?anchor=/sensors/temp

   RES: 2.05 "Content" Content

   The following example shows a large firmware resource with a size
   attribute.  The consumer of this link would use the sz attribute to
   determine if the resource representation is too large and if block
   transfer would be required to request it.  In this case a client with
   only a 64 KiB flash might only support a 16-bit integer for storing
   the sz attribute.  Thus a special flag or value should be used to
   indicate "Big" (larger than 64 KiB).

   REQ: GET /.well-known/core?rt=firmware

   RES: 2.05 "Content" Content

6.  Security Considerations

   This specification has the same security considerations as described
   in Section 7 of [RFC5988].  The "/.well-known/core" resource MAY be
   protected e.g. using DTLS when hosted on a CoAP server as per
   [I-D.ietf-core-coap] Section 10.2.

   Some servers might provide resource discovery services to a mix of
   clients that are trusted to different levels.  For example, a
   lighting control system might allow any client to read state
   variables, but only certain clients to write state (turn lights on or
   off).  Servers that have authentication and authorization features
   SHOULD support authentication features of the underlying transport
   protocols (HTTP or DTLS/TLS) and allow servers to return different
   lists of links based on a client's identity and authorization.  While
   such servers might not return all links to all requesters, not
   providing the link does not, by itsef, control access to the relevant
   resource - a bad actor could know or guess the right URIs.  Servers
   can also lie about the resources available.  If it is important for a
   client to only get information from a known source, then that source
   needs to be authenticated.

   Multicast requests using CoAP for the well-known link-format
   resources could be used to perform denial of service on a constrained
   network.  A multicast request SHOULD only be accepted if the request
   is sufficiently authenticated and secured using e.g.  IPsec or an
   appropriate object security mechanism.

   CoRE link format parsers should be aware that a link description may
   be cyclical, i.e., contain a link to itself.  These cyclical links
   could be direct or indirect (i.e., through referenced link
   resources).  Care should be taken when parsing link descriptions and
   accessing cyclical links.

7.  IANA Considerations

7.1.  Well-known 'core' URI

   This memo registers the "core" well-known URI in the Well-Known URI
   Registry as defined by [RFC5785].

   URI suffix: core

   Change controller: IETF

   Specification document(s): [[ this document ]]

   Related information: None

7.2.  New 'hosts' relation type

   This memo registers the new "hosts" Web Linking relation type as per

   Relation Name: hosts

   Description: Refers to a resource hosted by the server indicated by
   the link context.

   Reference: [[ this document ]]

   Notes: This relation is used in CoRE where links are retrieved as a
   "/.well-known/core" resource representation. representation, and is the default
   relation type in the CoRE Link Format.

   Application Data: None

7.3.  New link-format Internet media type

   This memo registers the a new Internet media type for the CoRE link
   format, application/link-format.

   Type name: application

   Subtype name: link-format

   Required parameters: None

   Optional parameters: None

   Encoding considerations: Binary data (UTF-8)

   Security considerations:

   Multicast requests using CoAP for the well-known link-format
   resources could be used to perform denial of service on a constrained
   network.  A multicast request SHOULD only be accepted if the request
   is sufficiently authenticated and secured using e.g.  IPsec or an
   appropriate object security mechanism.

   CoRE link format parsers should be aware that a link description may
   be cyclical, i.e., contain a link to itself.  These cyclical links
   could be direct or indirect (i.e., through referenced link
   resources).  Care should be taken when parsing link descriptions and
   accessing cyclical links.

   Interoperability considerations:

   Published specification: [[ this document ]]

   Applications that use this media type: CoAP server and client
   implementations for resource discovery and HTTP applications that use
   the link-format as a payload.

   Additional information:

   Magic number(s):

   File extension(s): *.wlnk

   Macintosh file type code(s):

   Intended usage: COMMON

   Restrictions on usage: None

   Author: CoRE WG

   Change controller: IETF

7.4.  Constrained RESTful Environments (CORE) Parameters Registry

   This specification establishes a new Constrained RESTful Environments
   (CORE) Parameters registry, which contains two new sub-registries of
   Link Target Attribute values (defined in [RFC5988]), one for Resource
   Type (rt=) Link Target Attribute values and the other for Interface
   Description (if=) Link Target Attribute values.  No initial entries
   are defined by this specification for either sub-registry.

   For both sub-registries, values starting with the characters "core"
   are registered using the IETF Review registration policy [RFC5226].
   All other values are registered using the Specification Required
   policy, which requires review by a designated expert appointed by the
   IESG or their delegate.

   The designated expert will enforce the following requirements:

   o  Registration values MUST be related to the intended purpose of
      these attributes as described in Section 3.

   o  Registered values MUST conform to the ABNF reg-rel-type definition
      of Section 2, meaning that the value starts with a lower case
      alphabetic character, followed by a sequence of lower case
      alphabetic, numeric, "." or "-" characters, and contains no white

   o  It is recommended that the period "." character be used for
      dividing name segments, and that the dash "-" character be used
      for making a segment more readable.  Example Interface Description
      values might be "core.batch" and "".

   o  URIs are reserved for free use as extension values for these
      attributes, and MUST NOT be registered.

   Registration requests consist of the completed registration template
   below, with the reference pointing to the required specification.  To
   allow for the allocation of values prior to publication, the
   designated expert may approve registration once they are satisfied
   that a specification will be published.

   Note that link target attribute values can be registered by third
   parties, if the Designated Expert determines that an unregistered
   link target attribute values is widely deployed and not likely to be
   registered in a timely manner.

   The registration template for both sub-registries is:

   o  Attribute Value:

   o  Description:

   o  Reference:

   o  Notes: [optional]

   Registration requests should be sent to the
   mailing list, marked clearly in the subject line (e.g., "NEW RESOURCE
   TYPE - example" to register an "example" relation type, or "NEW
   INTERFACE DESCRIPTION - example" to register an "example" interface

   Within at most 14 days of the request, the Designated Expert(s) will
   either approve or deny the registration request, communicating this
   decision to the review list and IANA.  Denials should include an
   explanation and, if applicable, suggestions as to how to make the
   request successful.

   Decisions (or lack thereof) made by the Designated Expert can be
   first appealed to Application Area Directors (contactable using email address or directly by looking up their
   email addresses on website) and, if the
   appellant is not satisfied with the response, to the full IESG (using
   the mailing list).

8.  Acknowledgments

   Special thanks to Peter Bigot, who has made a considerable number
   reviews and text contributions that greatly improved the document.
   In particular, Peter is responsible for early improvements to the
   ABNF descriptions and the idea for a new "hosts" relation type.

   Thanks to Mark Nottingham and Eran Hammer-Lahav for the discussions
   and ideas that led to this draft, and to Carsten Bormann, Martin
   Thomson, Alexey Melnikov, Julian Reschke, Joel Halpern, Richard
   Barnes, Barry Leiba and Peter Saint-Andre for extensive comments and
   contributions that improved the text.

   Thanks to Michael Stuber, Richard Kelsey, Cullen Jennings, Guido
   Moritz, Peter Van Der Stok, Adriano Pezzuto, Lisa Dussealt, Alexey
   Melnikov, Gilbert Clark, Salvatore Loreto, Petri Mutka, Szymon Sasin,
   Robert Quattlebaum, Robert Cragie, Angelo Castellani, Tom Herbst, Ed
   Beroset, Gilman Tolle, Robby Simpson, Colin O'Flynn and David Ryan
   for helpful comments and discussions that have shaped the document.

9.  Changelog

   Changes from ietf-13 to ietf-14:

      o Editorial clarifications.

      o Examples and explanation for filtering when a target attribute
      of relation-type contains multiple values.

   Changes from ietf-12 to ietf-13:

      o Improvements to the new CoRE Parameters registry

      o Replaced the Section 4.1 ABNF Query Filter definition with a URI
      Template (#240)

      o Aligned examples with rt= and if= value rules

      o Clarified that "href" can not be a link parameter

   Changes from ietf-11 to ietf-12:

      o Changed "uri" to "href" in the filter query (#200)

      o Upgraded all ABNF to RFC5234 (#197)

      o Put multiple rt= and if= values in a single attribute (as in
      rel=) (#199)

      o Use the Origin definition (#191)

      o Clarified URI fetching rules (#196)

      o Added access control and other security consideration
      improvements (#189)
      o Fixed normalization for query pattern matching (#192)

      o Added an anchor restriction for hosts (#193)

      o New rules for determining link context (#194)

      o Described how to convert from HTTP Link Header (#190)

      o Created a registry for rt= and if= values (#195)

      o Integration of all other IETF LC and IESG comments.

   Changes from ietf-10 to ietf-11:

      o Fixed editorial nits.

   Changes from ietf-09 to ietf-10:

      o Changed to SHOULD NOT for multiple relation types (#178).

      o Changed to SHOULD NOT for multicast response repression (#179).

      o Updated ABNF for queries (#179).

      o Editorial improvements from WGLC comments.

   Changes from ietf-08 to ietf-09:

      o Corrected ABNF and editorial nits.

      o Elided empty responses to multicast request.

   Changes from ietf-07 to ietf-08:

      o IESG submission nits.

   Changes from ietf-06 to ietf-07:

      o Moved the Content-type attribute (ct=) to the base CoAP

   Changes from ietf-05 to ietf-06:

      o Added improved text about the encoding of the format as UTF-8,
      but treating it as binary data without normalization.

   Changes from ietf-04 to ietf-05:

      o Removed mention of UTF-8 as this is already defined by RFC5988

      o Changed encoding considerations to "Binary data" (#157)

      o Updated ABNF to disallow leading zeros in integers (#159)

      o Updated examples and reference for coap-06 (#152)

      o Removed the application/link-format CoAP code registration, now
      included in the CoAP specification directly (#160)

   Changes from ietf-03 to ietf-04:

      o Removed the attribute registry (#145).

      o Requested a CoAP media type for application/link-format (#144).

      o Editorial and reference improvements from AD review (#146).

      o Added a range limitation for ct attribute.

      o Added security considerations and file extension for
      application/link-format registration.

   Changes from ietf-02 to ietf-03:

      o Removed 'obs' attribute definition, now defined in the CoAP
      Observation spec (#99).

      o Changed Resource name (n=) to Resource type (rt=) and d= to if=

      o Hierarchical organization of links under /.well-known/core
      removed (#95).

      o Bug in Section 3.1 on byte-wise query matching fixed (#91).

      o Explanatory text added about alternative Web link formats (#92).

      o Fixed a bug in Section 2.2.4 (#93).

      o Added use case examples (#89).

      o Clarified how the CoRE link format is used and how it differs
      from RFC5988 (#90, #98).

      o Changed the Interface definition format to quoted-string to
      match the resource type.

      o Added an IANA registry for CoRE Link Format attributes (#100).

   Changes from ietf-01 to ietf-02:

      o Added references to RFC5988 (#41).

      o Removed sh and id link-extensions (#42).

      o Defined the use of UTF-8 (#84).

      o Changed query filter definition for any parameter (#70).

      o Added more example, now as a separate section (#43).

      o Mentioned cyclical links in the security section (#57).

      o Removed the sh and id attributes, added obs and sz attributes

      o Improved the context and relation description wrt RFC5988 and
      requested a new "hosts" default relation type (#85).

   Changes from ietf-00 to ietf-01:

      o Editorial changes to correct references.

      o Formal definition for filter query string.

      o Removed URI-reference option from "n" and "id".

      o Added security text about multicast requests.

   Changes from shelby-00 to ietf-00:

      o Fixed the ABNF link-extension definitions (quotes around URIs,
      integer definition).

      o Clarified that filtering is optional, and the query string is to
      be ignored if not supported (and the URI path processed as

      o Required support of wildcard * processing if filtering is

      o Removed the assumption of a default content-type.

10.  References

10.1.  Normative References

   [RFC2119]  Bradner, S., "Key words for use in RFCs to Indicate
              Requirement Levels", BCP 14, RFC 2119, March 1997.

   [RFC2616]  Fielding, R., Gettys, J., Mogul, J., Frystyk, H.,
              Masinter, L., Leach, P., and T. Berners-Lee, "Hypertext
              Transfer Protocol -- HTTP/1.1", RFC 2616, June 1999.

   [RFC3629]  Yergeau, F., "UTF-8, a transformation format of ISO
              10646", STD 63, RFC 3629, November 2003.

   [RFC3986]  Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform
              Resource Identifier (URI): Generic Syntax", STD 66,
              RFC 3986, January 2005.

   [RFC4288]  Freed, N. and J. Klensin, "Media Type Specifications and
              Registration Procedures", BCP 13, RFC 4288, December 2005.

   [RFC5226]  Narten, T. and H. Alvestrand, "Guidelines for Writing an
              IANA Considerations Section in RFCs", BCP 26, RFC 5226,
              May 2008.

   [RFC5234]  Crocker, D. and P. Overell, "Augmented BNF for Syntax
              Specifications: ABNF", STD 68, RFC 5234, January 2008.

   [RFC5646]  Phillips, A. and M. Davis, "Tags for Identifying
              Languages", BCP 47, RFC 5646, September 2009.

   [RFC5987]  Reschke, J., "Character Set and Language Encoding for
              Hypertext Transfer Protocol (HTTP) Header Field
              Parameters", RFC 5987, August 2010.

   [RFC5988]  Nottingham, M., "Web Linking", RFC 5988, October 2010.

   [RFC6570]  Gregorio, J., Fielding, R., Hadley, M., Nottingham, M.,
              and D. Orchard, "URI Template", RFC 6570, March 2012.

10.2.  Informative References

              Shelby, Z., Hartke, K., Bormann, C., and B. Frank,
              "Constrained Application Protocol (CoAP)",
              draft-ietf-core-coap-09 (work in progress), March 2012.

   [REST]     Fielding, R., "Architectural Styles and the Design of
              Network-based Software Architectures", 2000, <http://

   [RFC1034]  Mockapetris, P., "Domain names - concepts and facilities",
              STD 13, RFC 1034, November 1987.

   [RFC1035]  Mockapetris, P., "Domain names - implementation and
              specification", STD 13, RFC 1035, November 1987.

   [RFC2045]  Freed, N. and N. Borenstein, "Multipurpose Internet Mail
              Extensions (MIME) Part One: Format of Internet Message
              Bodies", RFC 2045, November 1996.

   [RFC4287]  Nottingham, M., Ed. and R. Sayre, Ed., "The Atom
              Syndication Format", RFC 4287, December 2005.

   [RFC4919]  Kushalnagar, N., Montenegro, G., and C. Schumacher, "IPv6
              over Low-Power Wireless Personal Area Networks (6LoWPANs):
              Overview, Assumptions, Problem Statement, and Goals",
              RFC 4919, August 2007.

   [RFC5785]  Nottingham, M. and E. Hammer-Lahav, "Defining Well-Known
              Uniform Resource Identifiers (URIs)", RFC 5785,
              April 2010.

   [RFC6454]  Barth, A., "The Web Origin Concept", RFC 6454,
              December 2011.

   [WADL]     Hadley, M., "Web Application Description Language (WADL)",
              2009, <

Author's Address

   Zach Shelby
   Kidekuja 2
   Vuokatti  88600

   Phone: +358407796297