draft-ietf-ipcdn-pktc-signaling-01.txt   draft-ietf-ipcdn-pktc-signaling-02.txt 
IPCDN IPCDN
Internet Draft Gordon Beacham Internet Draft Gordon Beacham
Document: draft-ietf-ipcdn-pktc-signaling-01.txt Motorola, Inc Document: draft-ietf-ipcdn-pktc-signaling- Motorola, Inc
02.txt
Satish Kumar Satish Kumar
Texas Instruments Texas Instruments
Sumanth Sumanth
Channabasappa Channabasappa
Alopa Networks Alopa Networks
Inc Inc
Expires: November 2003 May 2003 Expires: April 2004 October 2003
Network Control Signaling (NCS) Signaling MIB for Network Control Signaling (NCS) Signaling MIB for PacketCable and
PacketCable/IPCablecom MTAs IPCablecom Multimedia Terminal Adapters (MTAs)
Status of this Memo Status of this Memo
This document is an Internet-Draft and is in full conformance with
all provisions of Section 10 of RFC 2026 [RFC2026].
Internet-Drafts are working documents of the Internet Engineering Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF), its areas, and its working groups. Note that Task Force (IETF), its areas, and its working groups. Note that
other groups may also distribute working documents as Internet- other groups may also distribute working documents as Internet-
Drafts. Drafts.
Internet-Drafts are draft documents valid for a maximum of six Internet-Drafts are draft documents valid for a maximum of six
months and may be updated, replaced, or obsoleted by other documents months and may be updated, replaced, or obsoleted by other documents
at any time. It is inappropriate to use Internet-Drafts as at any time. It is inappropriate to use Internet-Drafts as
reference material or to cite them other than as "work in progress." reference material or to cite them other than as "work in progress."
skipping to change at page 1, line 44 skipping to change at page 1, line 41
http://www.ietf.org/ietf/1id-abstracts.txt http://www.ietf.org/ietf/1id-abstracts.txt
The list of Internet-Draft Shadow Directories can be accessed at The list of Internet-Draft Shadow Directories can be accessed at
http://www.ietf.org/shadow.html. http://www.ietf.org/shadow.html.
Copyright Notice Copyright Notice
Copyright (C) The Internet Society (2003). All Rights Reserved. Copyright (C) The Internet Society (2003). All Rights Reserved.
Abstract Abstract
This memo defines the Signaling Management Information Base (MIB) This memo defines a portion of the Management Information Base (MIB)
for use with network management protocols in the Internet community. for use with network management protocols in the Internet community.
In particular, it provides a common data and format representation In particular, it provides a common data and format representation
for PacketCable/IPCablecom compliant Multimedia Terminal Adapter for PacketCable and IPCablecom compliant Multimedia Terminal Adapter
devices. devices.
PacketCable/IPCablecom NCS Signaling MIB May 2003
This memo specifies a MIB module in a manner that is compliant to This memo specifies a MIB module in a manner that is compliant to
the SNMP SMIv2. The set of objects are consistent with the SNMP the SNMP SMIv2. The set of objects are consistent with the SNMP
framework and existing SNMP standards. framework and existing SNMP standards.
PacketCable/IPCablecom NCS Signaling MIB October 2003
Table of Contents Table of Contents
1. The Internet-Standard Management Framework....................2 1. The Internet-Standard Management Framework....................2
2. Terminology...................................................2 2. Terminology...................................................2
2.1 MTA.......................................................3 2.1 MTA.......................................................2
2.2 Endpoint..................................................3
3. Overview......................................................3 3. Overview......................................................3
3.1 Structure of the MIB......................................3 3.1 Structure of the MIB......................................3
3.2 pktcSigDevConfigObjects...................................3 3.2 pktcSigDevConfigObjects...................................4
3.3 pktcSigNotification.......................................5 3.3 pktcSigNotification.......................................6
3.4 pktcSigConformance........................................6 3.4 pktcSigConformance........................................6
4. Definitions...................................................6 4. Definitions...................................................6
5. Acknowledgments..............................................51 5. Acknowledgments..............................................52
6. Normative References.........................................51 6. Normative References.........................................52
7. Informative References.......................................52 7. Informative References.......................................53
8. Security Considerations......................................53 8. Security Considerations......................................54
9. Intellectual Property........................................55 9. Intellectual Property........................................56
10. Authors' Addresses..........................................55 10. Authors' Addresses..........................................56
11. Full Copyright Statement....................................56 11. Full Copyright Statement....................................57
1. The Internet-Standard Management Framework 1. The Internet-Standard Management Framework
For a detailed overview of the documents that describe the current For a detailed overview of the documents that describe the current
Internet-Standard Management Framework, please refer to section 7 of Internet-Standard Management Framework, please refer to section 7 of
RFC 3410 [RFC3410]. RFC 3410 [RFC3410].
Managed objects are accessed via a virtual information store, termed Managed objects are accessed via a virtual information store, termed
the Management Information Base or MIB. MIB objects are generally the Management Information Base or MIB. MIB objects are generally
accessed through the Simple Network Management Protocol (SNMP). accessed through the Simple Network Management Protocol (SNMP).
skipping to change at page 3, line 5 skipping to change at page 2, line 54
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
"OPTIONAL", when used in the guidelines in this memo, are to be "OPTIONAL", when used in the guidelines in this memo, are to be
interpreted as described in RFC 2119 [RFC2119]. interpreted as described in RFC 2119 [RFC2119].
The terms "MIB module" and "information module" are used The terms "MIB module" and "information module" are used
interchangeably in this memo. As used here, both terms refer to any interchangeably in this memo. As used here, both terms refer to any
of the three types of information modules defined in Section 3 of of the three types of information modules defined in Section 3 of
RFC 2578 [RFC2578]. RFC 2578 [RFC2578].
PacketCable/IPCablecom NCS Signaling MIB May 2003
2.1 MTA 2.1 MTA
Multimedia Terminal Adapter, a device that contains the interface(s) PacketCable/IPCablecom NCS Signaling MIB October 2003
to a physical voice device, a network interface, CODECs, and all
signaling and encapsulation functions required for VoIP transport, A Multimedia Terminal Adapter is a PacketCable or IPCablecom
class feature signaling and QoS signaling. compliant device providing telephony services over a cable or hybrid
system used to deliver video signals to a community. It contains an
interface to endpoints, a network interface, CODECs, and all
signaling and encapsulation functions required for Voice over IP
transport, call signaling, and Quality of Service signaling. A MTA
can be an embedded or a standalone device. An Embedded MTA (E-MTA)
is a MTA device containing an embedded DOCSIS Cable Modem. A
Standalone MTA (S-MTA) is a MTA device separated from the DOCSIS
Cable Modem by non-DOCSIS MAC interface (e.g., Ethernet, USB).
2.2 Endpoint
An endpoint or MTA endpoint is a standard RJ-11 telephony physical
port located on the MTA and used for attaching the telephone device
to the MTA.
3. Overview 3. Overview
This MIB provides a set of objects required for Signaling This MIB provides a set of objects required for Signaling
PacketCable and IPCablecom compliant MultiMedia Terminal Adapter PacketCable and IPCablecom compliant Multimedia Terminal Adapter
(MTA) devices. MTA devices include one or more endpoints (e.g., (MTA) devices. MTA devices include one or more endpoints (e.g.,
telephone ports) which receive signaling information to establish telephone ports) which receive signaling information to establish
ring cadence, and codecs used for providing telephony service. ring cadence, and codecs used for providing telephony service.
Telephone systems are typically very complex and often have a wide Telephone systems are typically very complex and often have a wide
distribution. It is therefore important for management systems to distribution. It is therefore important for management systems to
support MTAs from multiple vendors at the same time, including those support MTAs from multiple vendors at the same time, including those
from multiple countries. This MIB module provides objects suitable from multiple countries. This MIB module provides objects suitable
for managing signaling for MTA devices in the widest possible for managing signaling for MTA devices in the widest possible
variety of marketplaces. variety of marketplaces.
Several normative and informative references are used to help define
NCS Signaling MIB objects. As a convention, in the object REFERENCE
clauses, we use the PacketCable reference. IPCablecom compliant MTA
devices MUST use the equivalent IPCablecom references.
3.1 Structure of the MIB 3.1 Structure of the MIB
This MIB is identified by pktcSigMib and is structured in three This MIB is identified by pktcSigMib and is structured in three
groups: groups:
- Signaling information that control device and endpoint - Signaling information that control device and endpoint
configuration objects (pktcSigMibObjects) configuration objects (pktcSigMibObjects)
- Signaling Notification object, that notifies the status - Signaling Notification object, that notifies the status
(pktcSigNotification) (pktcSigNotification)
PacketCable/IPCablecom NCS Signaling MIB October 2003
- Signaling Conformance has mandatory signaling objects - Signaling Conformance has mandatory signaling objects
(pktcSigConformance) (pktcSigConformance)
Each group of objects is explained in detail. Each group of objects is explained in detail.
3.2 pktcSigDevConfigObjects 3.2 pktcSigDevConfigObjects
pktcSigDevCodecTable - this table describes MTA supported codec
types.
pktcSigDevEchoCancellation - This object identifies the capability pktcSigDevEchoCancellation - This object identifies the capability
of echo cancellation on the device. of echo cancellation on the device.
pktcSigDevSilenceSuppression - This object specifies if the device pktcSigDevSilenceSuppression - This object specifies if the device
is capable of silence suppression (Voice Activity Detection). is capable of silence suppression (Voice Activity Detection).
PacketCable/IPCablecom NCS Signaling MIB May 2003
pktcSigDevConnectionMode - This object specifies the connection
modes that the MTA device can support.
pktcSigDevR0Cadence - this object specifies ring cadence 0. pktcSigDevR0Cadence - this object specifies ring cadence 0.
pktcSigDevR6Cadence - this object specifies ring cadence 6. pktcSigDevR6Cadence - this object specifies ring cadence 6.
pktcSigDevR7Cadence - this object specifies ring cadence 7. pktcSigDevR7Cadence - this object specifies ring cadence 7.
pktcSigDefCallSigDscp - this object specifies the default value used pktcSigDefCallSigDscp - this object specifies the default value used
in the IP header for setting the Differentiated Services Code Point in the IP header for setting the Differentiated Services Code Point
(DSCP) value for call signaling. (DSCP) value for call signaling.
skipping to change at page 4, line 47 skipping to change at page 5, line 5
pktcSigServiceClassNameMask - this object contains a value for the pktcSigServiceClassNameMask - this object contains a value for the
Call Signaling Network Mask. Call Signaling Network Mask.
pktcSigNcsServiceFlowState - this object contains a status value of pktcSigNcsServiceFlowState - this object contains a status value of
the Call Signaling Service Flow. the Call Signaling Service Flow.
pktcSigDevR1Cadence - this object specifies ring cadence 1. pktcSigDevR1Cadence - this object specifies ring cadence 1.
pktcSigDevR2Cadence - this object specifies ring cadence 2. pktcSigDevR2Cadence - this object specifies ring cadence 2.
PacketCable/IPCablecom NCS Signaling MIB October 2003
pktcSigDevR3Cadence - this object specifies ring cadence 3. pktcSigDevR3Cadence - this object specifies ring cadence 3.
pktcSigDevR4Cadence - this object specifies ring cadence 4. pktcSigDevR4Cadence - this object specifies ring cadence 4.
pktcSigDevR5Cadence - this object specifies ring cadence 5. pktcSigDevR5Cadence - this object specifies ring cadence 5.
pktcSigDevRgCadence - this object specifies ring cadence rg. pktcSigDevRgCadence - this object specifies ring cadence rg.
PacketCable/IPCablecom NCS Signaling MIB May 2003
pktcSigDevRsCadence - this object specifies ring cadence rs. pktcSigDevRsCadence - this object specifies ring cadence rs.
pktcSigDevRtCadence - this object specifies ring cadence rt. pktcSigDevRtCadence - this object specifies ring cadence rt.
pktcSigDevCIDMode - this ETSI object selects various modes of caller pktcSigDevCIDMode - this ETSI object selects various modes of caller
id in common use. id in common use.
pktcSigDevCIDFskAfterRing - this ETSI object sets the delay between pktcSigDevCIDFskAfterRing - this ETSI object sets the delay between
the end of first ringing and the transmission of caller id the end of first ringing and the transmission of caller id
information. information.
pktcSigDevCIDFskAfterDTAS - this ETSI object sets the delay between pktcSigDevCIDFskAfterDTAS - this ETSI object sets the delay between
the dual-tone alert signal and the transmission of caller id the dual-tone alert signal and the transmission of caller id
information. information.
pktcSigDevCIDFskAfterRPAS - this ETSI object sets the delay between
the ring pulse alert signal and the transmission of caller id
information.
pktcSigDevCIDRingAfterFSK - this ETSI object sets the delay between pktcSigDevCIDRingAfterFSK - this ETSI object sets the delay between
the transmission of caller id information and the first ringing the transmission of caller id information and the first ringing
pattern. pattern.
pktcSigDevCIDDTASAfterLR - this ETSI object sets the delay between pktcSigDevCIDDTASAfterLR - this ETSI object sets the delay between
the end of a line reversal and the dual-tone alert signal. the end of a line reversal and the dual-tone alert signal.
pktcSigDevVmwiMode - this ETSI object selects various modes of
visual message waiting indicator service in common use.
pktcSigDevVmwiFskAfterDTAS - this ETSI object sets the delay between
the dual-tone alert signal and the transmission of visual message
waiting information.
pktcSigDevVwmiFskAfterRPAS - this ETSI object sets the delay between
the ring pulse alert signal and the transmission of visual message
waiting information.
pktcSigDevVwmiDTASAfterLR - this ETSI object sets the delay between
the end of a line reversal and the dual-tone alert signal for visual
message waiting information.
PacketCable/IPCablecom NCS Signaling MIB October 2003
pktcSigDevRingCadenceTable - this international object provides a pktcSigDevRingCadenceTable - this international object provides a
flexible structure within which to specify a variety of ring flexible structure within which to specify a variety of ring
cadences. cadences.
pktcSigDevStandardRingCadence - this international object specifies pktcSigDevStandardRingCadence - this international object specifies
the standard ring assumed by the MTA. the standard ring assumed by the MTA.
pktcSigDevRingSplashCadence - this international object specifies pktcSigDevRingSplashCadence - this international object specifies
the standard splash ring assumed by the MTA. the standard splash ring assumed by the MTA.
skipping to change at page 6, line 5 skipping to change at page 6, line 33
pktcSigEndPntConfigTable - this table describes the PacketCable pktcSigEndPntConfigTable - this table describes the PacketCable
EndPoint selected signaling type. The number of entries in this EndPoint selected signaling type. The number of entries in this
table represents the number of provisioned endpoints. table represents the number of provisioned endpoints.
3.3 pktcSigNotification 3.3 pktcSigNotification
pktcSigNotification - this object is used for signaling notification pktcSigNotification - this object is used for signaling notification
and reserved for future use. and reserved for future use.
PacketCable/IPCablecom NCS Signaling MIB May 2003
3.4 pktcSigConformance 3.4 pktcSigConformance
pktcSigCompliances - this table has one object that has compliance pktcSigCompliances - this table has one object that has compliance
statements for devices that implement Signaling on the MTA. statements for devices that implement Signaling on the MTA.
pktcSigGroups - this table contains group of objects for the common pktcSigGroups - this table contains group of objects for the common
portion of the PacketCable NCS and Signaling MIB. portion of the PacketCable NCS and Signaling MIB.
pktcInternationalGroup - this table extends this MIB Module by pktcInternationalGroup - this table extends this MIB Module by
establishing a set of objects designed to support operations over establishing a set of objects designed to support operations over
skipping to change at page 6, line 29 skipping to change at page 7, line 4
4. Definitions 4. Definitions
PKTC-IETF-SIG-MIB DEFINITIONS ::= BEGIN PKTC-IETF-SIG-MIB DEFINITIONS ::= BEGIN
IMPORTS IMPORTS
MODULE-IDENTITY, MODULE-IDENTITY,
OBJECT-TYPE, OBJECT-TYPE,
Integer32, Integer32,
Unsigned32, Unsigned32,
mib-2 mib-2
PacketCable/IPCablecom NCS Signaling MIB October 2003
FROM SNMPv2-SMI FROM SNMPv2-SMI
InetAddressType, InetAddressType,
InetAddress, InetAddress,
InetPortNumber InetPortNumber
FROM INET-ADDRESS-MIB FROM INET-ADDRESS-MIB
TEXTUAL-CONVENTION, TEXTUAL-CONVENTION,
RowStatus, RowStatus,
TruthValue TruthValue
FROM SNMPv2-TC FROM SNMPv2-TC
OBJECT-GROUP, OBJECT-GROUP,
MODULE-COMPLIANCE MODULE-COMPLIANCE
FROM SNMPv2-CONF FROM SNMPv2-CONF
SnmpAdminString SnmpAdminString
FROM SNMP-FRAMEWORK-MIB FROM SNMP-FRAMEWORK-MIB
ifIndex ifIndex
FROM IF-MIB FROM IF-MIB
Dscp Dscp
FROM DIFFSERV-DSCP-TC; FROM DIFFSERV-DSCP-TC;
pktcSigMib MODULE-IDENTITY pktcSigMib MODULE-IDENTITY
LAST-UPDATED "200305070000Z" -- May 7, 2003 LAST-UPDATED "200310020000Z" -- October 2, 2003
ORGANIZATION "IETF IPCDN Working Group" ORGANIZATION "IETF IPCDN Working Group"
CONTACT-INFO CONTACT-INFO
"Satish Kumar Mudugere Eswaraiah "Satish Kumar Mudugere Eswaraiah
Texas Instruments India (P) Ltd., Texas Instruments India (P) Ltd.,
Golf view, Wind Tunnel Road Golf view, Wind Tunnel Road
Murugesh Palya Murugesh Palya
PacketCable/IPCablecom NCS Signaling MIB May 2003
Bangalore - 560 017, INDIA Bangalore - 560 017, INDIA
Phone: +91 80 5269451 Phone: +91 80 5269451
Email: satish.kumar@ti.com Email: satish.kumar@ti.com
Sumanth Channabasappa Sumanth Channabasappa
Alopa Networks Inc Alopa Networks Inc
248, McCaslin Bvld #101, 248, McCaslin Bvld #101,
Louisville, Colorado - 80027 Louisville, Colorado - 80027
U.S.A. U.S.A.
Phone: +1 303 604 6595 Phone: +1 303 604 6595
skipping to change at page 7, line 29 skipping to change at page 8, line 4
Gordon Beacham Gordon Beacham
Motorola BCS/DCG Motorola BCS/DCG
6450 Sequence Drive, Bldg. 1 6450 Sequence Drive, Bldg. 1
San Diego, CA 92121, USA San Diego, CA 92121, USA
Phone: +1 858-404-2335 Phone: +1 858-404-2335
E-Mail: gordon.beacham@motorola.com E-Mail: gordon.beacham@motorola.com
IETF IPCDN Working Group IETF IPCDN Working Group
General Discussion: ipcdn@ietf.org General Discussion: ipcdn@ietf.org
Subscribe: http://www.ietf.org/mailman/listinfo/ipcdn Subscribe: http://www.ietf.org/mailman/listinfo/ipcdn
PacketCable/IPCablecom NCS Signaling MIB October 2003
Archive: ftp://ftp.ietf.org/ietf-mail-archive/ipcdn Archive: ftp://ftp.ietf.org/ietf-mail-archive/ipcdn
Co-Chair: Jean-Francois Mule, jf.mule@cablelabs.com Co-Chair: Jean-Francois Mule, jf.mule@cablelabs.com
Co-Chair: Richard Woundy, Richard_Woundy@cable.comcast.com" Co-Chair: Richard Woundy, Richard_Woundy@cable.comcast.com"
DESCRIPTION DESCRIPTION
"This MIB module supplies the basic management "This MIB module supplies the basic management
object for the PacketCable/IPCablecom Signaling object for the PacketCable and IPCablecom Signaling
protocols. This version of the MIB includes protocols. This version of the MIB includes
common signaling and Network Call Signaling common signaling and Network Call Signaling
(NCS) related signaling objects. (NCS) related signaling objects.
Copyright (C) The Internet Society (2003). This version of Copyright (C) The Internet Society (2003). This version of
this MIB module is part of RFC yyyy; see the RFC itself for this MIB module is part of RFC yyyy; see the RFC itself for
full legal notices." full legal notices."
-- RFC Ed: replace yyyy with actual RFC number and remove this note -- RFC Ed: replace yyyy with actual RFC number and remove this note
REVISION "200305070000Z" REVISION "200310020000Z"
DESCRIPTION DESCRIPTION
"Initial version, published as RFC yyyy." "Initial version, published as RFC yyyy."
-- RFC Ed: replace yyyy with actual RFC number and remove this note -- RFC Ed: replace yyyy with actual RFC number and remove this note
::= { mib-2 XXX } ::= { mib-2 XXX }
-- RFC Ed: replace XXX with IANA-assigned number and remove this -- RFC Ed: replace XXX with IANA-assigned number and remove this
-- note -- note
-- Textual Conventions -- Textual Conventions
PacketCable/IPCablecom NCS Signaling MIB May 2003
TenthdBm ::= TEXTUAL-CONVENTION TenthdBm ::= TEXTUAL-CONVENTION
DISPLAY-HINT "d-1" DISPLAY-HINT "d-1"
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This data type represents power levels that are normally "This data type represents power levels that are normally
expressed in dBm. Units are in tenths of a dBm; expressed in dBm. Units are in tenths of a dBm;
for example, -13.5 dBm will be represented as -135." for example, -13.5 dBm will be represented as -135."
SYNTAX Integer32 SYNTAX Integer32
PktcCodecType ::= TEXTUAL-CONVENTION PktcCodecType ::= TEXTUAL-CONVENTION
skipping to change at page 8, line 28 skipping to change at page 9, line 4
DESCRIPTION DESCRIPTION
" Textual Convention defines various types of CODECs that " Textual Convention defines various types of CODECs that
MAY be supported. The list of CODECs MUST be consistent MAY be supported. The list of CODECs MUST be consistent
with the Codec RTP MAP Parameters Table in the PacketCable with the Codec RTP MAP Parameters Table in the PacketCable
CODEC specification. In-line embedded comments below CODEC specification. In-line embedded comments below
contain the Literal Codec Name for each CODEC. The Literal contain the Literal Codec Name for each CODEC. The Literal
Codec Name is the second column of the table with CODEC Codec Name is the second column of the table with CODEC
RTP Map Parameters. Literal Codec Name Column contains the RTP Map Parameters. Literal Codec Name Column contains the
CODEC name used in LCD of the NCS messages CRCX/MDCX and CODEC name used in LCD of the NCS messages CRCX/MDCX and
is also used to identify the CODEC in the CMS is also used to identify the CODEC in the CMS
PacketCable/IPCablecom NCS Signaling MIB October 2003
Provisioning Specification. RTP Map Parameter Column of Provisioning Specification. RTP Map Parameter Column of
the Table contains the string used in the media attribute the Table contains the string used in the media attribute
line (a=) of the SDP parameters in NCS messages." line (a=) of the SDP parameters in NCS messages."
SYNTAX INTEGER { SYNTAX INTEGER {
other (1), other (1),
unknown (2), unknown (2),
g729 (3), -- G729 g729 (3), -- G729
reserved (4), -- reserved for future use reserved (4), -- reserved for future use
g729E (5), -- G729E g729E (5), -- G729E
pcmu (6), -- PCMU pcmu (6), -- PCMU
skipping to change at page 9, line 4 skipping to change at page 9, line 34
PktcRingCadence ::= TEXTUAL-CONVENTION PktcRingCadence ::= TEXTUAL-CONVENTION
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object represents a ring cadence and repeatable " This object represents a ring cadence and repeatable
characteristics in bit string format. The ring cadence characteristics in bit string format. The ring cadence
representation starts with the first 1 in the pattern (the representation starts with the first 1 in the pattern (the
leading 0s in the MSB are padding and are to be ignored). leading 0s in the MSB are padding and are to be ignored).
Each bit represents 100ms of tone; 1 is tone, 0 is no Each bit represents 100ms of tone; 1 is tone, 0 is no
tone. 64 bits MUST be used for cadence representation. The tone. 64 bits MUST be used for cadence representation. The
PacketCable/IPCablecom NCS Signaling MIB May 2003
LSB 4 bits of this object are used for representing LSB 4 bits of this object are used for representing
repeatable characteristics. 0000 means repeatable, and repeatable characteristics. 0000 means repeatable, and
1000 means non repeatable. During SNMP SET operations, 64 1000 means non repeatable. During SNMP SET operations, 64
bits MUST be used, otherwise the MTA MUST reject the bits MUST be used, otherwise the MTA MUST reject the
value. As an example, the hex representation of a ring value. As an example, the hex representation of a ring
cadence of 0.5 secs on; 4 secs off; repeatable would be: cadence of 0.5 secs on; 4 secs off; repeatable would be:
0x0001F00000000000." 0x0001F00000000000."
SYNTAX BITS { SYNTAX BITS {
interval1 (0), interval1 (0),
interval2 (1), interval2 (1),
skipping to change at page 9, line 29 skipping to change at page 10, line 4
interval5 (4), interval5 (4),
interval6 (5), interval6 (5),
interval7 (6), interval7 (6),
interval8 (7), interval8 (7),
interval9 (8), interval9 (8),
interval10 (9), interval10 (9),
interval11 (10), interval11 (10),
interval12 (11), interval12 (11),
interval13 (12), interval13 (12),
interval14 (13), interval14 (13),
PacketCable/IPCablecom NCS Signaling MIB October 2003
interval15 (14), interval15 (14),
interval16 (15), interval16 (15),
interval17 (16), interval17 (16),
interval18 (17), interval18 (17),
interval19 (18), interval19 (18),
interval20 (19), interval20 (19),
interval21 (20), interval21 (20),
interval22 (21), interval22 (21),
interval23 (22), interval23 (22),
interval24 (23), interval24 (23),
skipping to change at page 10, line 4 skipping to change at page 10, line 34
interval32 (31), interval32 (31),
interval33 (32), interval33 (32),
interval34 (33), interval34 (33),
interval35 (34), interval35 (34),
interval36 (35), interval36 (35),
interval37 (36), interval37 (36),
interval38 (37), interval38 (37),
interval39 (38), interval39 (38),
interval40 (39), interval40 (39),
interval41 (40), interval41 (40),
PacketCable/IPCablecom NCS Signaling MIB May 2003
interval42 (41), interval42 (41),
interval43 (42), interval43 (42),
interval44 (43), interval44 (43),
interval45 (44), interval45 (44),
interval46 (45), interval46 (45),
interval47 (46), interval47 (46),
interval48 (47), interval48 (47),
interval49 (48), interval49 (48),
interval50 (49), interval50 (49),
interval51 (50), interval51 (50),
skipping to change at page 10, line 29 skipping to change at page 11, line 4
interval54 (53), interval54 (53),
interval55 (54), interval55 (54),
interval56 (55), interval56 (55),
interval57 (56), interval57 (56),
interval58 (57), interval58 (57),
interval59 (58), interval59 (58),
interval60 (59), interval60 (59),
repeat1 (60), repeat1 (60),
repeat2 (61), repeat2 (61),
repeat3 (62), repeat3 (62),
PacketCable/IPCablecom NCS Signaling MIB October 2003
repeat4 (63) repeat4 (63)
} }
PktcSigType ::= TEXTUAL-CONVENTION PktcSigType ::= TEXTUAL-CONVENTION
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object lists the various types of signaling that may " This object lists the various types of signaling that may
be supported. be supported.
ncs - Network call signaling is a derivation of MGCP ncs - Network call signaling is a derivation of MGCP
(Media Gateway Control Protocol) defined for (Media Gateway Control Protocol) defined for
PacketCable and IPCablecom MTAs. " IPCablecom/PacketCable MTAs. "
SYNTAX INTEGER { SYNTAX INTEGER {
other(1), other(1),
reserved(2), -- reserved for future use reserved(2), -- reserved for future use
ncs(3) ncs(3)
} }
pktcSigMibObjects OBJECT IDENTIFIER ::= { pktcSigMib 1 } pktcSigMibObjects OBJECT IDENTIFIER ::= { pktcSigMib 1 }
pktcSigDevConfigObjects OBJECT IDENTIFIER ::= { pktcSigMibObjects 1 pktcSigDevConfigObjects OBJECT IDENTIFIER ::=
} { pktcSigMibObjects 1 }
pktcNcsEndPntConfigObjects OBJECT IDENTIFIER ::= { pktcSigMibObjects pktcNcsEndPntConfigObjects OBJECT IDENTIFIER ::=
2 } { pktcSigMibObjects 2 }
pktcSigEndPntConfigObjects OBJECT IDENTIFIER ::= { pktcSigEndPntConfigObjects OBJECT IDENTIFIER ::=
pktcSigMibObjects 3 } { pktcSigMibObjects 3 }
-- --
-- The pktcSigDevCodecTable defines the codecs supported by the -- The codec table (pktcSigDevCodecTable) defines the codecs
-- supported by the Media Terminal Adapter (MTA). There is one entry
PacketCable/IPCablecom NCS Signaling MIB May 2003 -- for each codec supported.
-- Media Terminal Adapter (MTA). There is one entry for each codec
-- supported.
-- --
pktcSigDevCodecTable OBJECT-TYPE pktcSigDevCodecTable OBJECT-TYPE
SYNTAX SEQUENCE OF PktcSigDevCodecEntry SYNTAX SEQUENCE OF PktcSigDevCodecEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This table describes the MTA supported codec types." " This table describes the MTA supported codec types."
::= { pktcSigDevConfigObjects 1 } ::= { pktcSigDevConfigObjects 1 }
pktcSigDevCodecEntry OBJECT-TYPE pktcSigDevCodecEntry OBJECT-TYPE
SYNTAX PktcSigDevCodecEntry SYNTAX PktcSigDevCodecEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" List of supported codec types for the MTA." "Each entry represents a supported codec type for the
MTA."
INDEX { pktcSigDevCodecIndex } INDEX { pktcSigDevCodecIndex }
::= { pktcSigDevCodecTable 1 } ::= { pktcSigDevCodecTable 1 }
PacketCable/IPCablecom NCS Signaling MIB October 2003
PktcSigDevCodecEntry ::= SEQUENCE { PktcSigDevCodecEntry ::= SEQUENCE {
pktcSigDevCodecIndex Unsigned32, pktcSigDevCodecIndex Unsigned32,
pktcSigDevCodecType PktcCodecType, pktcSigDevCodecType PktcCodecType,
pktcSigDevCodecMax Unsigned32 pktcSigDevCodecMax Unsigned32
} }
pktcSigDevCodecIndex OBJECT-TYPE pktcSigDevCodecIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..255) SYNTAX Unsigned32 (1..255)
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
skipping to change at page 12, line 4 skipping to change at page 12, line 35
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" A codec type supported by this MTA." " A codec type supported by this MTA."
::= { pktcSigDevCodecEntry 2 } ::= { pktcSigDevCodecEntry 2 }
pktcSigDevCodecMax OBJECT-TYPE pktcSigDevCodecMax OBJECT-TYPE
SYNTAX Unsigned32(1..255) SYNTAX Unsigned32(1..255)
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
PacketCable/IPCablecom NCS Signaling MIB May 2003
" The maximum number of simultaneous sessions of the " The maximum number of simultaneous sessions of the
specific codec that the MTA can support. For example: specific codec that the MTA can support. For example:
pktcSigDevCodecType PktcSigDevCodecMax pktcSigDevCodecType PktcSigDevCodecMax
pcma 2 pcma 2
g728 2 g728 2
The MTA can simultaneously support 2 sessions using a PCMA The MTA can simultaneously support 2 sessions using a
codec AND 2 sessions using a G728 codec. In this example, G.711 (PCMA) codec AND 2 sessions using a G.728 codec. In
the MTA can NOT simultaneously support 1 PCMA codec and 3 this example, the MTA can NOT simultaneously support 1
G728 codecs." G.711 (PCMA) codec and 3 G.728 codecs."
::= { pktcSigDevCodecEntry 3 } ::= { pktcSigDevCodecEntry 3 }
-- --
-- These are the common signaling related definitions that affect -- These are the common signaling related definitions that affect
-- the entire MTA device. -- the entire MTA device.
-- --
pktcSigDevEchoCancellation OBJECT-TYPE pktcSigDevEchoCancellation OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
PacketCable/IPCablecom NCS Signaling MIB October 2003
DESCRIPTION DESCRIPTION
" This object specifies if the device is capable of echo " This object specifies if the device is capable of echo
cancellation." cancellation."
::= { pktcSigDevConfigObjects 2 } ::= { pktcSigDevConfigObjects 2 }
pktcSigDevSilenceSuppression OBJECT-TYPE pktcSigDevSilenceSuppression OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object specifies if the device is capable of " This object specifies if the device is capable of
silence suppression (Voice Activity Detection)." silence suppression (Voice Activity Detection)."
::= { pktcSigDevConfigObjects 3 } ::= { pktcSigDevConfigObjects 3 }
pktcSigDevConnectionMode OBJECT-TYPE pktcSigDevCallerIdSigProtocol OBJECT-TYPE
SYNTAX BITS { SYNTAX INTEGER {
voice(0), fsk (1),
fax(1), dtmf (2)
modem(2)
} }
MAX-ACCESS read-only MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object specifies the connection modes that the MTA " This object identifies the subscriber line protocol used
device can support." for signaling on-hook caller id information."
REFERENCE
"EN 300 659-1 Specification"
DEFVAL { fsk }
::= { pktcSigDevConfigObjects 4 } ::= { pktcSigDevConfigObjects 4 }
-- --
-- In the United States Ring Cadences 0, 6, and 7 are custom ring -- In the United States Ring Cadences 0, 6, and 7 are custom ring
-- cadences definable by the system administrator. The following
PacketCable/IPCablecom NCS Signaling MIB May 2003 -- three objects are used for these definitions.
-- cadences definable by the user. The following three objects are
-- used for these definitions.
-- --
pktcSigDevR0Cadence OBJECT-TYPE pktcSigDevR0Cadence OBJECT-TYPE
SYNTAX PktcRingCadence SYNTAX PktcRingCadence
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object specifies ring cadence 0 (a user defined " This object specifies ring cadence 0 (a user defined
field) where each bit represents a duration of 100 field) where each bit represents a duration of 100
milliseconds (6 seconds total), except the LSB 4 bits milliseconds (6 seconds total), except the LSB 4 bits
which are used to represent repeatable characteristics." which are used to represent repeatable characteristics."
DEFVAL {{ interval1, interval2, interval3, interval4, interval5, DEFVAL {{ interval1, interval2, interval3, interval4, interval5,
interval6, interval7, interval8, interval9, interval6, interval7, interval8, interval9,
interval10, interval11, interval12, interval13, interval10, interval11, interval12, interval13,
interval14, interval15, interval16, interval17, interval14, interval15, interval16, interval17,
interval18, interval19, interval20 }} interval18, interval19, interval20 }}
-- 11111111111111111111000000000000000000000000000000000000000 -- 11111111111111111111000000000000000000000000000000000000000
PacketCable/IPCablecom NCS Signaling MIB October 2003
-- 00000 -- 00000
::= { pktcSigDevConfigObjects 5 } ::= { pktcSigDevConfigObjects 5 }
pktcSigDevR6Cadence OBJECT-TYPE pktcSigDevR6Cadence OBJECT-TYPE
SYNTAX PktcRingCadence SYNTAX PktcRingCadence
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object specifies ring cadence 6 (a user defined " This object specifies ring cadence 6 (a user defined
field) where each bit represents a duration of 100 field) where each bit represents a duration of 100
skipping to change at page 14, line 4 skipping to change at page 14, line 37
pktcSigDevR7Cadence OBJECT-TYPE pktcSigDevR7Cadence OBJECT-TYPE
SYNTAX PktcRingCadence SYNTAX PktcRingCadence
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object specifies ring cadence 7 (a user defined " This object specifies ring cadence 7 (a user defined
field) where each bit represents a duration of 100 field) where each bit represents a duration of 100
milliseconds (6 seconds total), except the LSB 4 bits milliseconds (6 seconds total), except the LSB 4 bits
which are used to represent repeatable characteristics." which are used to represent repeatable characteristics."
PacketCable/IPCablecom NCS Signaling MIB May 2003
DEFVAL {{ interval1, interval2, interval3, interval4, interval5, DEFVAL {{ interval1, interval2, interval3, interval4, interval5,
interval6, interval7, interval8, interval9, interval6, interval7, interval8, interval9,
interval10, interval11, interval12, interval13, interval10, interval11, interval12, interval13,
interval14, interval15, interval16, interval17, interval14, interval15, interval16, interval17,
interval18, interval19, interval20 }} interval18, interval19, interval20 }}
-- 11111111111111111111000000000000000000000000000000000000000 -- 11111111111111111111000000000000000000000000000000000000000
-- 00000 -- 00000
::= { pktcSigDevConfigObjects 7 } ::= { pktcSigDevConfigObjects 7 }
pktcSigDefCallSigDscp OBJECT-TYPE pktcSigDefCallSigDscp OBJECT-TYPE
SYNTAX Dscp -- RFC 3289: DIFFSERV-DSCP-TC SYNTAX Dscp -- RFC 3289: DIFFSERV-DSCP-TC
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" The default value used in the IP header for setting the " The default value used in the IP header for setting the
Differentiated Server Code Point (DSCP) value for call Differentiated Server Code Point (DSCP) value for call
signaling." signaling."
DEFVAL { 0 } DEFVAL { 0 }
::= { pktcSigDevConfigObjects 8 } ::= { pktcSigDevConfigObjects 8 }
PacketCable/IPCablecom NCS Signaling MIB October 2003
pktcSigDefMediaStreamDscp OBJECT-TYPE pktcSigDefMediaStreamDscp OBJECT-TYPE
SYNTAX Dscp -- RFC 3289: DIFFSERV-DSCP-TC SYNTAX Dscp -- RFC 3289: DIFFSERV-DSCP-TC
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" The default value used in the IP header for setting " The default value used in the IP header for setting
the Differentiated Server Code Point (DSCP) value for the Differentiated Server Code Point (DSCP) value for
media stream packets." media stream packets."
DEFVAL { 0 } DEFVAL { 0 }
::= { pktcSigDevConfigObjects 9 } ::= { pktcSigDevConfigObjects 9 }
skipping to change at page 15, line 4 skipping to change at page 15, line 36
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This table describes the signaling types supported by this " This table describes the signaling types supported by this
MTA." MTA."
::= { pktcSigDevConfigObjects 10 } ::= { pktcSigDevConfigObjects 10 }
pktcSigCapabilityEntry OBJECT-TYPE pktcSigCapabilityEntry OBJECT-TYPE
SYNTAX PktcSigCapabilityEntry SYNTAX PktcSigCapabilityEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
PacketCable/IPCablecom NCS Signaling MIB May 2003
DESCRIPTION DESCRIPTION
" Entries in pktcMtaDevSigCapabilityTable - List of " Entries in pktcMtaDevSigCapabilityTable - List of
supported signaling types, versions and vendor extensions supported signaling types, versions and vendor extensions
for this MTA. Each entry in the list provides for one for this MTA. Each entry in the list provides for one
signaling type and version combination. If the device signaling type and version combination. If the device
supports multiple versions of the same signaling type it supports multiple versions of the same signaling type it
will require multiple entries." will require multiple entries."
INDEX { pktcSignalingIndex } INDEX { pktcSignalingIndex }
::= { pktcSigCapabilityTable 1 } ::= { pktcSigCapabilityTable 1 }
PktcSigCapabilityEntry ::= SEQUENCE { PktcSigCapabilityEntry ::= SEQUENCE {
pktcSignalingIndex Unsigned32, pktcSignalingIndex Unsigned32,
pktcSignalingType PktcSigType, pktcSignalingType PktcSigType,
pktcSignalingVersion SnmpAdminString, pktcSignalingVersion SnmpAdminString,
pktcSignalingVendorExtension SnmpAdminString pktcSignalingVendorExtension SnmpAdminString
} }
pktcSignalingIndex OBJECT-TYPE pktcSignalingIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..255) SYNTAX Unsigned32 (1..255)
PacketCable/IPCablecom NCS Signaling MIB October 2003
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" The index value which uniquely identifies an entry in the " The index value which uniquely identifies an entry in the
pktcSigCapabilityTable." pktcSigCapabilityTable."
::= { pktcSigCapabilityEntry 1 } ::= { pktcSigCapabilityEntry 1 }
pktcSignalingType OBJECT-TYPE pktcSignalingType OBJECT-TYPE
SYNTAX PktcSigType SYNTAX PktcSigType
MAX-ACCESS read-only MAX-ACCESS read-only
skipping to change at page 16, line 4 skipping to change at page 16, line 37
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" Provides the version of the signaling type - reference " Provides the version of the signaling type - reference
pktcSignalingType. Examples would be 1.0 or 2.33 etc." pktcSignalingType. Examples would be 1.0 or 2.33 etc."
::= { pktcSigCapabilityEntry 3 } ::= { pktcSigCapabilityEntry 3 }
pktcSignalingVendorExtension OBJECT-TYPE pktcSignalingVendorExtension OBJECT-TYPE
SYNTAX SnmpAdminString SYNTAX SnmpAdminString
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
PacketCable/IPCablecom NCS Signaling MIB May 2003
DESCRIPTION DESCRIPTION
" The vendor extension allows vendors to provide a list of " The vendor extension allows vendors to provide a list of
additional capabilities, vendors can decide how to encode additional capabilities, vendors can decide how to encode
these extensions, although space separated text is these extensions, although space separated text is
suggested." suggested."
::= { pktcSigCapabilityEntry 4 } ::= { pktcSigCapabilityEntry 4 }
pktcSigDefNcsReceiveUdpPort OBJECT-TYPE pktcSigDefNcsReceiveUdpPort OBJECT-TYPE
SYNTAX InetPortNumber (1025..65535) SYNTAX InetPortNumber (1025..65535)
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object contains the MTA User Datagram Protocol (UDP) " This object contains the MTA User Datagram Protocol (UDP)
receive port that is being used for NCS call signaling. receive port that is being used for NCS call signaling.
This object should only be changed by the configuration This object should only be changed by the configuration
file." file."
REFERENCE REFERENCE
"Refer to the IPCablecom/PacketCable NCS Specification." "PacketCable NCS Specification"
DEFVAL { 2427 } DEFVAL { 2427 }
PacketCable/IPCablecom NCS Signaling MIB October 2003
::= { pktcSigDevConfigObjects 11 } ::= { pktcSigDevConfigObjects 11 }
pktcSigServiceClassNameUS OBJECT-TYPE pktcSigServiceClassNameUS OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..15)) SYNTAX SnmpAdminString (SIZE (0..15))
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object contains a string indicating the Service " This object contains a string indicating the Service
Class Name to create an Upstream Service Flow for NCS. Class Name to create an Upstream Service Flow for NCS.
If the object has an empty string value then the NCS SF If the object has an empty string value then the NCS SF
is not created and the best effort primary SF is used for is not created and the best effort primary SF is used for
NCS data. If this object is set to a non-empty (non-zero NCS data. If this object is set to a non-empty (non-zero
length) string, an MTA MUST create the NCS SF if it does length) string, the MTA MUST create the NCS SF if it does
not currently exist and the pktcSigServiceClassNameMask not currently exist and the pktcSigServiceClassNameMask
object has a non-zero value. If this object is object has a non-zero value. If this object is
subsequently set to an empty (zero-length) string , an subsequently set to an empty (zero-length) string, the
MTA MUST delete the NCS SF if it exists. Setting this MTA MUST delete the NCS SF if it exists. Setting this
object to a different value does not cause the US SF to object to a different value does not cause the US SF to
be re-created. The string MUST contain printable ASCII be re-created. The string MUST contain printable ASCII
characters. The length of the string does not include a characters. The length of the string does not include a
terminating zero. The MTA MUST append a terminating zero terminating zero. The MTA MUST append a terminating zero
when the MTA creates the service flow." when the MTA creates the service flow."
DEFVAL { "" } DEFVAL { "" }
::= { pktcSigDevConfigObjects 12 } ::= { pktcSigDevConfigObjects 12 }
pktcSigServiceClassNameDS OBJECT-TYPE pktcSigServiceClassNameDS OBJECT-TYPE
SYNTAX SnmpAdminString (SIZE (0..15)) SYNTAX SnmpAdminString (SIZE (0..15))
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
PacketCable/IPCablecom NCS Signaling MIB May 2003
" This object contains a string indicating the Service " This object contains a string indicating the Service
Class Name to create a Downstream Service Flow for NCS. Class Name to create a Downstream Service Flow for NCS.
If the object has an empty string value then the NCS SF If the object has an empty string value then the NCS SF
is not created and the best effort primary SF is used for is not created and the best effort primary SF is used for
NCS data. If this object is set to a non-empty (non-zero NCS data. If this object is set to a non-empty (non-zero
length) string, an MTA MUST create the NCS SF if it does length) string, the MTA MUST create the NCS SF if it does
not currently exist and the pktcSigServiceClassNameMask not currently exist and the pktcSigServiceClassNameMask
object has a non-zero value. If this object is object has a non-zero value. If this object is
subsequently set to an empty (zero-length) string , an subsequently set to an empty (zero-length) string, the
MTA MUST delete the NCS SF if it exists. Setting this MTA MUST delete the NCS SF if it exists. Setting this
object to a different value does not cause the DS SF to object to a different value does not cause the DS SF to
be re-created. The string MUST contain printable ASCII be re-created. The string MUST contain printable ASCII
characters. The length of the string does not include a characters. The length of the string does not include a
terminating zero. The MTA MUST append a terminating zero terminating zero. The MTA MUST append a terminating zero
when the MTA creates the service flow." when the MTA creates the service flow."
DEFVAL { "" } DEFVAL { "" }
::= { pktcSigDevConfigObjects 13 } ::= { pktcSigDevConfigObjects 13 }
pktcSigServiceClassNameMask OBJECT-TYPE pktcSigServiceClassNameMask OBJECT-TYPE
PacketCable/IPCablecom NCS Signaling MIB October 2003
SYNTAX Integer32 SYNTAX Integer32
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object contains a value used for the NCS Call " This object contains a value used for the NCS Call
Signaling classifier mask. If this object is set to a Signaling classifier mask. If this object is set to a
zero value, an MTA MUST delete both NCS SFs. When zero value, the MTA MUST delete both NCS SFs. When
this object is set to a non-zero value, an MTA MUST this object is set to a non-zero value, the MTA MUST
create the NCS SF for which the corresponding MIB object create the NCS SF for which the corresponding MIB object
(pktcSigServiceClassNameUS or pktcSigServiceClassNameDS) (pktcSigServiceClassNameUS or pktcSigServiceClassNameDS)
has a non-empty value, if the NCS SF does not already has a non-empty value, if the NCS SF does not already
exist." exist."
DEFVAL { 0 } DEFVAL { 0 }
::= { pktcSigDevConfigObjects 14 } ::= { pktcSigDevConfigObjects 14 }
pktcSigNcsServiceFlowState OBJECT-TYPE pktcSigNcsServiceFlowState OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
notactive (1), notactive (1),
skipping to change at page 18, line 4 skipping to change at page 18, line 37
} }
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object contains a status value of the Call Signaling "This object contains a status value of the Call Signaling
Service Flow. Service Flow.
- notactive indicates that the NCS SF is not being used, - notactive indicates that the NCS SF is not being used,
and has not tried to be created, and has not tried to be created,
- active indicates that the NCS SF is in use, - active indicates that the NCS SF is in use,
- error indicates that the NCS SF creation resulted in - error indicates that the NCS SF creation resulted in
PacketCable/IPCablecom NCS Signaling MIB May 2003
an error and the best effort channel is used for NCS an error and the best effort channel is used for NCS
Signaling." Signaling."
::= { pktcSigDevConfigObjects 15 } ::= { pktcSigDevConfigObjects 15 }
pktcSigDevR1Cadence OBJECT-TYPE pktcSigDevR1Cadence OBJECT-TYPE
SYNTAX PktcRingCadence SYNTAX PktcRingCadence
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object specifies ring cadence 1 (a user defined " This object specifies ring cadence 1 (a user defined
field) where each bit represents a duration of 100 field) where each bit represents a duration of 100
milliseconds (6 seconds total), except the LSB 4 bits milliseconds (6 seconds total), except the LSB 4 bits
which are used to represent repeatable characteristics." which are used to represent repeatable characteristics."
DEFVAL {{ interval1, interval2, interval3, interval4, interval5, DEFVAL {{ interval1, interval2, interval3, interval4, interval5,
interval6, interval7, interval8, interval9, interval6, interval7, interval8, interval9,
interval10, interval11, interval12, interval13, interval10, interval11, interval12, interval13,
interval14, interval15, interval16, interval17, interval14, interval15, interval16, interval17,
interval18, interval19, interval20 }} interval18, interval19, interval20 }}
-- 11111111111111111111000000000000000000000000000000000000000 -- 11111111111111111111000000000000000000000000000000000000000
PacketCable/IPCablecom NCS Signaling MIB October 2003
-- 00000 -- 00000
::= { pktcSigDevConfigObjects 16 } ::= { pktcSigDevConfigObjects 16 }
pktcSigDevR2Cadence OBJECT-TYPE pktcSigDevR2Cadence OBJECT-TYPE
SYNTAX PktcRingCadence SYNTAX PktcRingCadence
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object specifies ring cadence 2 (a user defined " This object specifies ring cadence 2 (a user defined
field) where each bit represents a duration of 100 field) where each bit represents a duration of 100
skipping to change at page 19, line 4 skipping to change at page 19, line 37
pktcSigDevR3Cadence OBJECT-TYPE pktcSigDevR3Cadence OBJECT-TYPE
SYNTAX PktcRingCadence SYNTAX PktcRingCadence
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object specifies ring cadence 3 (a user defined " This object specifies ring cadence 3 (a user defined
field) where each bit represents a duration of 100 field) where each bit represents a duration of 100
milliseconds (6 seconds total), except the LSB 4 bits milliseconds (6 seconds total), except the LSB 4 bits
which are used to represent repeatable characteristics." which are used to represent repeatable characteristics."
DEFVAL {{ interval1, interval2, interval3, interval4, interval7, DEFVAL {{ interval1, interval2, interval3, interval4, interval7,
PacketCable/IPCablecom NCS Signaling MIB May 2003
interval8, interval9, interval10, interval13, interval8, interval9, interval10, interval13,
interval14, interval15, interval16, interval17, interval14, interval15, interval16, interval17,
interval18, interval19, interval20 }} interval18, interval19, interval20 }}
-- 11110011110011111111000000000000000000000000000000000000000 -- 11110011110011111111000000000000000000000000000000000000000
-- 00000 -- 00000
::= { pktcSigDevConfigObjects 18 } ::= { pktcSigDevConfigObjects 18 }
pktcSigDevR4Cadence OBJECT-TYPE pktcSigDevR4Cadence OBJECT-TYPE
SYNTAX PktcRingCadence SYNTAX PktcRingCadence
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object specifies ring cadence 4 (a user defined " This object specifies ring cadence 4 (a user defined
field) where each bit represents a duration of 100 field) where each bit represents a duration of 100
milliseconds (6 seconds total), except the LSB 4 bits milliseconds (6 seconds total), except the LSB 4 bits
which are used to represent repeatable characteristics." which are used to represent repeatable characteristics."
DEFVAL {{ interval1, interval2, interval3, interval6, interval7, DEFVAL {{ interval1, interval2, interval3, interval6, interval7,
interval8, interval9, interval10, interval11, interval8, interval9, interval10, interval11,
interval12, interval13, interval14, interval15, interval12, interval13, interval14, interval15,
PacketCable/IPCablecom NCS Signaling MIB October 2003
interval18, interval19, interval20 }} interval18, interval19, interval20 }}
-- 11100111111111100111000000000000000000000000000000000000000 -- 11100111111111100111000000000000000000000000000000000000000
-- 00000 -- 00000
::= { pktcSigDevConfigObjects 19 } ::= { pktcSigDevConfigObjects 19 }
pktcSigDevR5Cadence OBJECT-TYPE pktcSigDevR5Cadence OBJECT-TYPE
SYNTAX PktcRingCadence SYNTAX PktcRingCadence
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
skipping to change at page 20, line 4 skipping to change at page 20, line 37
pktcSigDevRgCadence OBJECT-TYPE pktcSigDevRgCadence OBJECT-TYPE
SYNTAX PktcRingCadence SYNTAX PktcRingCadence
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object specifies ring cadence rg (a user defined " This object specifies ring cadence rg (a user defined
field) where each bit represents a duration of 100 field) where each bit represents a duration of 100
milliseconds (6 seconds total), except the LSB 4 bits milliseconds (6 seconds total), except the LSB 4 bits
which are used to represent repeatable characteristics." which are used to represent repeatable characteristics."
DEFVAL {{ interval1, interval2, interval3, interval4, interval5, DEFVAL {{ interval1, interval2, interval3, interval4, interval5,
PacketCable/IPCablecom NCS Signaling MIB May 2003
interval6, interval7, interval8, interval9, interval6, interval7, interval8, interval9,
interval10, interval11, interval12, interval13, interval10, interval11, interval12, interval13,
interval14, interval15, interval16, interval17, interval14, interval15, interval16, interval17,
interval18, interval19, interval20 } } interval18, interval19, interval20 } }
-- 11111111111111111111000000000000000000000000000000000000000 -- 11111111111111111111000000000000000000000000000000000000000
-- 00000 -- 00000
::= { pktcSigDevConfigObjects 21 } ::= { pktcSigDevConfigObjects 21 }
pktcSigDevRsCadence OBJECT-TYPE pktcSigDevRsCadence OBJECT-TYPE
SYNTAX PktcRingCadence SYNTAX PktcRingCadence
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object specifies ring cadence rs (a user defined " This object specifies ring cadence rs (a user defined
field) where each bit represents a duration of 100 field) where each bit represents a duration of 100
milliseconds (6 seconds total), except the LSB 4 bits milliseconds (6 seconds total), except the LSB 4 bits
which are used to represent repeatable characteristics. which are used to represent repeatable characteristics.
The MTA MUST reject any attempt to make this object The MTA MUST reject any attempt to make this object
repeatable." repeatable."
PacketCable/IPCablecom NCS Signaling MIB October 2003
DEFVAL {{ interval1, interval2, interval3, interval4, interval5, DEFVAL {{ interval1, interval2, interval3, interval4, interval5,
repeat1 }} repeat1 }}
-- 11111000000000000000000000000000000000000000000000000000000 -- 11111000000000000000000000000000000000000000000000000000000
-- 01000 -- 01000
::= { pktcSigDevConfigObjects 22 } ::= { pktcSigDevConfigObjects 22 }
pktcSigDevRtCadence OBJECT-TYPE pktcSigDevRtCadence OBJECT-TYPE
SYNTAX PktcRingCadence SYNTAX PktcRingCadence
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
skipping to change at page 21, line 4 skipping to change at page 21, line 37
-- 11111111111111111111000000000000000000000000000000000000000 -- 11111111111111111111000000000000000000000000000000000000000
-- 00000 -- 00000
::= { pktcSigDevConfigObjects 23 } ::= { pktcSigDevConfigObjects 23 }
pktcSigPowerRingFrequency OBJECT-TYPE pktcSigPowerRingFrequency OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
f20Hz(1), f20Hz(1),
f25Hz(2), f25Hz(2),
f33Point33Hz(3), f33Point33Hz(3),
f50Hz(4), f50Hz(4),
PacketCable/IPCablecom NCS Signaling MIB May 2003
f15Hz(5), f15Hz(5),
f16Hz(6), f16Hz(6),
f22Hz(7), f22Hz(7),
f23Hz(8), f23Hz(8),
f45Hz(9) f45Hz(9)
} }
UNITS "Hertz" UNITS "Hertz"
MAX-ACCESS read-write MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" The power ring frequency is the frequency at which the " This object must only be set via the configuration file
during the provisioning process.
The power ring frequency is the frequency at which the
sinusoidal voltage must travel down the twisted pair to sinusoidal voltage must travel down the twisted pair to
make terminal equipment ring. Different countries define make terminal equipment ring. Different countries define
different electrical characteristics to make terminal different electrical characteristics to make terminal
equipment ring." equipment ring."
REFERENCE REFERENCE
" Refer to EN 300 001 for a list of frequency ranges that "EN 300 001 contains a list of frequency ranges that
PacketCable/IPCablecom NCS Signaling MIB October 2003
are defined for each country." are defined for each country."
DEFVAL { f20Hz } DEFVAL { f20Hz }
::= { pktcSigDevConfigObjects 24 } ::= { pktcSigDevConfigObjects 24 }
pktcSigPCMCoding OBJECT-TYPE
SYNTAX INTEGER {
aLaw(1),
uLaw(2)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This is the Pulse Code Modulation (PCM) format used by an
MTA when coding and decoding analog telephone signals."
DEFVAL { aLaw }
::= { pktcSigDevConfigObjects 25 }
pktcSigPulseSignalTable OBJECT-TYPE pktcSigPulseSignalTable OBJECT-TYPE
SYNTAX SEQUENCE OF PktcSigPulseSignalEntry SYNTAX SEQUENCE OF PktcSigPulseSignalEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" The Pulse signal table defines the pulse signal operation. " The Pulse signal table defines the pulse signal operation.
There are four types of international pulse signals, There are four types of international pulse signals,
initial ring, meter pulse, reverse polarity and no initial ring, meter pulse, reverse polarity and no
battery. The Pulse duration type is specific and it is battery. The Pulse duration type is specific and it is
specified with a 1 to 32 value." specified with a 1 to 32 value. Objects in this table do
::= { pktcSigDevConfigObjects 26 } not persist across MTA reboots."
::= { pktcSigDevConfigObjects 25 }
pktcSigPulseSignalEntry OBJECT-TYPE pktcSigPulseSignalEntry OBJECT-TYPE
SYNTAX PktcSigPulseSignalEntry SYNTAX PktcSigPulseSignalEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
PacketCable/IPCablecom NCS Signaling MIB May 2003
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" Unique value ranging from 1 to 32 that will correspond to " Unique value ranging from 1 to 32 that will correspond to
the value specified by the operator." the value specified by the operator."
INDEX { pktcSigPulseSignalIndex } INDEX { pktcSigPulseSignalIndex }
::= { pktcSigPulseSignalTable 1 } ::= { pktcSigPulseSignalTable 1 }
PktcSigPulseSignalEntry ::= SEQUENCE { PktcSigPulseSignalEntry ::= SEQUENCE {
pktcSigPulseSignalIndex Unsigned32, pktcSigPulseSignalIndex Unsigned32,
pktcSigPulseSignalDuration Unsigned32, pktcSigPulseSignalDuration Unsigned32,
skipping to change at page 22, line 33 skipping to change at page 22, line 53
pktcSigPulseSignalIndex OBJECT-TYPE pktcSigPulseSignalIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..32) SYNTAX Unsigned32 (1..32)
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" The table index equivalent to the operator specific pulse " The table index equivalent to the operator specific pulse
type and duration." type and duration."
::= { pktcSigPulseSignalEntry 1 } ::= { pktcSigPulseSignalEntry 1 }
pktcSigPulseSignalDuration OBJECT-TYPE pktcSigPulseSignalDuration OBJECT-TYPE
SYNTAX Unsigned32 (1..5000) SYNTAX Unsigned32 (50..5000)
UNITS "Milliseconds" UNITS "Milliseconds"
MAX-ACCESS read-write MAX-ACCESS read-write
PacketCable/IPCablecom NCS Signaling MIB October 2003
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" The pulse duration varies according to the operator and " The pulse duration varies according to the operator and
country." country."
REFERENCE REFERENCE
" Refer to the EN 300 001 Specification." "EN 300 001 Specification"
DEFVAL { 1000 } DEFVAL { 1000 }
::= {pktcSigPulseSignalEntry 2 } ::= {pktcSigPulseSignalEntry 2 }
pktcSigPulseSignalType OBJECT-TYPE pktcSigPulseSignalType OBJECT-TYPE
SYNTAX INTEGER SYNTAX INTEGER
{ {
initialRing(1), initialRing(1),
meterPulse(2), meterPulse(2),
reversePolarity(3), reversePolarity(3),
noBattery(4) noBattery(4)
} }
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
PacketCable/IPCablecom NCS Signaling MIB May 2003
" There are four types of international pulse signals." " There are four types of international pulse signals."
REFERENCE REFERENCE
" Refer to the EN 300 001 Specification." "EN 300 001 Specification"
DEFVAL { initialRing } DEFVAL { initialRing }
::= { pktcSigPulseSignalEntry 3 } ::= { pktcSigPulseSignalEntry 3 }
pktcSigPulseSignalDbLevel OBJECT-TYPE pktcSigPulseSignalDbLevel OBJECT-TYPE
SYNTAX TenthdBm (-250..150) SYNTAX TenthdBm (-200..30)
UNITS "dbm" UNITS "dbm"
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object only applies if pktcSigPulseSignalType = " This object only applies if pktcSigPulseSignalType =
meterPulse. This is the decibel level at which the meter meterPulse. This is the decibel level at which the meter
pulse could be generated. Example: pulse could be generated. Example:
pktcSigPulseSignalType pktcSigPulseSignalDbLevel pktcSigPulseSignalType pktcSigPulseSignalDbLevel
initialRing 0 (not used) initialRing not used
meterPulse -135 meterPulse -60
reversePolarity 0 (not used) reversePolarity not used
noBattery 0 (not used)" noBattery not used"
REFERENCE REFERENCE
" Refer to the EN 300 001 Specification." "EN 300 001 Specification"
DEFVAL { -135 } DEFVAL { -60 }
::={pktcSigPulseSignalEntry 4 } ::={pktcSigPulseSignalEntry 4 }
pktcSigPulseSignalFrequency OBJECT-TYPE pktcSigPulseSignalFrequency OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
zero (1), zero (1),
fifty(2), twelvethousand(2),
twelvethousand(3),
sixteenthousand(4) PacketCable/IPCablecom NCS Signaling MIB October 2003
sixteenthousand(3)
} }
UNITS "Hertz" UNITS "Hertz"
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object only applies if pktcSigPulseSignalType = " This object only applies if pktcSigPulseSignalType =
meterPulse. This is the frequency at which the meter pulse meterPulse. This is the frequency at which the meter pulse
could be generated. Example: could be generated. Example:
pktcSigPulseSignalType pktcSigPulseSignalDbLevel pktcSigPulseSignalType pktcSigPulseSignalDbLevel
initialRing zero (not used) initialRing not used
meterPulse fifty meterPulse sixteenthousand
reversePolarity zero (not used) reversePolarity not used
noBattery zero (not used)" noBattery not used.
Note: The zero value is used to turn off meter pulse."
REFERENCE REFERENCE
" Refer to the EN 300 001 Specification." "EN 300 001 Specification"
DEFVAL { fifty } DEFVAL { sixteenthousand }
::= { pktcSigPulseSignalEntry 5} ::= { pktcSigPulseSignalEntry 5}
PacketCable/IPCablecom NCS Signaling MIB May 2003
pktcSigPulseSignalRepeatCount OBJECT-TYPE pktcSigPulseSignalRepeatCount OBJECT-TYPE
SYNTAX Unsigned32 (0..5000) SYNTAX Unsigned32 (0..5000)
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This is the repeat count, which signifies how many times " This is the repeat count, which signifies how many times
to repeat the pulse." to repeat the pulse."
DEFVAL { 0 }
::={ pktcSigPulseSignalEntry 6 } ::={ pktcSigPulseSignalEntry 6 }
pktcSigPulseSignalPauseDuration OBJECT-TYPE pktcSigPulseSignalPauseDuration OBJECT-TYPE
SYNTAX Unsigned32 (1..5000) SYNTAX Unsigned32 (50..5000)
UNITS "Milliseconds" UNITS "Milliseconds"
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" The pause duration between pulses varies according to the " The pause duration between pulses varies according to the
operator and country." operator and country."
::= { pktcSigPulseSignalEntry 7 } ::= { pktcSigPulseSignalEntry 7 }
pktcSigDevCIDMode OBJECT-TYPE pktcSigDevCIDMode OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
duringRingingETS(1), duringRingingETS(1),
dtAsETS(2), dtAsETS(2),
rpAsETS(3), rpAsETS(3),
lrAsETS(4) lrAsETS(4)
} }
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
PacketCable/IPCablecom NCS Signaling MIB October 2003
DESCRIPTION DESCRIPTION
" This object is used for ETSI systems only. For on-hook " This object is used for ETSI systems only. For on-hook
Caller ID, pktcSigDevCIDMode selects the method of Caller Caller ID, pktcSigDevCIDMode selects the method of Caller
ID. For the duringRingingETS method, the FSK containing ID. For the duringRingingETS method, the FSK containing
the Caller ID information is sent between the first and the Caller ID information is sent between the first and
second ring pattern. For the dtAsETS, rpAsETS, and lrAsETS second ring pattern. For the dtAsETS, rpAsETS, and lrAsETS
methods, the FSK containing the Caller ID information is methods, the FSK containing the Caller ID information is
sent before the first ring pattern. For the dtAsETS sent before the first ring pattern. For the dtAsETS
method, the FSK is sent after the Dual Tone Alert Signal. method, the FSK is sent after the Dual Tone Alert Signal.
For the rpAsETS method, the FSK is sent after a Ring For the rpAsETS method, the FSK is sent after a Ring
Pulse. For the lrAsETS method, the Line Reversal occurs Pulse. For the lrAsETS method, the Line Reversal occurs
first, then the Dual Tone Alert Signal, and finally the first, then the Dual Tone Alert Signal, and finally the
FSK is sent." FSK is sent."
DEFVAL { dtAsETS } DEFVAL { dtAsETS }
::= {pktcSigDevConfigObjects 27 } ::= {pktcSigDevConfigObjects 26 }
pktcSigDevCIDFskAfterRing OBJECT-TYPE pktcSigDevCIDFskAfterRing OBJECT-TYPE
SYNTAX Unsigned32 (0..2000) SYNTAX Unsigned32 (0..2000)
UNITS "Milliseconds" UNITS "Milliseconds"
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
PacketCable/IPCablecom NCS Signaling MIB May 2003
DESCRIPTION DESCRIPTION
" This object is used for ETSI systems only. This object " This object is used for ETSI systems only. This object
specifies the delay between the end of first ringing specifies the delay between the end of first ringing
pattern and the start of the transmission of the FSK pattern and the start of the transmission of the FSK
containing the Caller ID information. It is only used when containing the Caller ID information. It is only used when
pktcSigDevCIDMode is duringRingingETS. pktcSigDevCIDMode is duringRingingETS.
pktcSigDevCIDMode pktcSigDevCIDFskAfterRing pktcSigDevCIDMode pktcSigDevCIDFskAfterRing
duringringingETS 550 ms duringringingETS 550 ms
dtAsETS 0 ms (not used) dtAsETS not used
rpAsETS 0 ms (not used) rpAsETS not used
lrAsETS 0 ms (not used)" lrAsETS not used"
REFERENCE REFERENCE
" Refer to the ETS 300 659-1 Specification." "EN 300 659-1 Specification"
DEFVAL { 550 } DEFVAL { 550 }
::= {pktcSigDevConfigObjects 28 } ::= {pktcSigDevConfigObjects 27 }
pktcSigDevCIDFskAfterDTAS OBJECT-TYPE pktcSigDevCIDFskAfterDTAS OBJECT-TYPE
SYNTAX Unsigned32 (0..500) SYNTAX Unsigned32 (0..500)
UNITS "Milliseconds" UNITS "Milliseconds"
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object is used for ETSI systems only. This object " This object is used for ETSI systems only. This object
specifies the delay between the end of the Dual Tone Alert specifies the delay between the end of the Dual Tone Alert
Signal (DT-AS) and the start of the transmission of the Signal (DT-AS) and the start of the transmission of the
FSK containing the Caller ID information. This object is FSK containing the Caller ID information. This object is
only used when pktcSigDevCIDMode is dtAsETS or lrAsETS. only used when pktcSigDevCIDMode is dtAsETS or lrAsETS.
pktcSigDevCIDMode pktcSigDevCIDFskAfterDTAS pktcSigDevCIDMode pktcSigDevCIDFskAfterDTAS
duringringingETS 0 ms (not used)
PacketCable/IPCablecom NCS Signaling MIB October 2003
duringringingETS not used
dtAsETS 50 ms dtAsETS 50 ms
rpAsETS 0 ms (not used) rpAsETS not used
lrAsETS 50 ms" lrAsETS 50 ms"
REFERENCE REFERENCE
" Refer to the ETS 300 659-1 Specification." "EN 300 659-1 Specification"
DEFVAL { 50 } DEFVAL { 50 }
::= {pktcSigDevConfigObjects 28 }
pktcSigDevCIDFskAfterRPAS OBJECT-TYPE
SYNTAX Unsigned32 (500..800)
UNITS "Milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This object is used for ETSI systems only. This object
specifies the delay between the end of the Ring Pulse
Alert Signal (RP-AS) and the start of the transmission of
the FSK containing the Caller ID information. This object
is only used when pktcSigDevCIDMode is rpAsETS.
pktcSigDevCIDMode pktcSigDevCIDFskAfterRPAS
duringringingETS not used
dtAsETS not used
rpAsETS 650 ms
lrAsETS not used"
REFERENCE
"EN 300 659-1 Specification"
DEFVAL { 650 }
::= {pktcSigDevConfigObjects 29 } ::= {pktcSigDevConfigObjects 29 }
pktcSigDevCIDRingAfterFSK OBJECT-TYPE pktcSigDevCIDRingAfterFSK OBJECT-TYPE
SYNTAX Unsigned32 (0..500) SYNTAX Unsigned32 (0..500)
UNITS "Milliseconds" UNITS "Milliseconds"
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object is used for ETSI systems only. This object " This object is used for ETSI systems only. This object
specifies the delay between the end of the complete specifies the delay between the end of the complete
transmission of the FSK containing the Caller ID transmission of the FSK containing the Caller ID
information and the start of the first ring pattern. It is information and the start of the first ring pattern. It is
only used when pktcSigDevCIDMode is dtAsETS, rpAsETS or only used when pktcSigDevCIDMode is dtAsETS, rpAsETS or
lrAsETS. lrAsETS.
PacketCable/IPCablecom NCS Signaling MIB May 2003
pktcSigDevCIDMode pktcSigDevCIDFskAfterFSK pktcSigDevCIDMode pktcSigDevCIDFskAfterFSK
duringringingETS 0 ms (not used) duringringingETS not used
dtAsETS 250 ms dtAsETS 250 ms
rpAsETS 250 ms rpAsETS 250 ms
lrAsETS 250 ms" lrAsETS 250 ms"
REFERENCE REFERENCE
" Refer to the ETS 300 659-1 Specification." "EN 300 659-1 Specification"
PacketCable/IPCablecom NCS Signaling MIB October 2003
DEFVAL { 250 } DEFVAL { 250 }
::= {pktcSigDevConfigObjects 30 } ::= {pktcSigDevConfigObjects 30 }
pktcSigDevCIDDTASAfterLR OBJECT-TYPE pktcSigDevCIDDTASAfterLR OBJECT-TYPE
SYNTAX Unsigned32 (0..655) SYNTAX Unsigned32 (0..655)
UNITS "Milliseconds" UNITS "Milliseconds"
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object is used for ETSI systems only. This object " This object is used for ETSI systems only. This object
specifies the delay between the end of the Line Reversal specifies the delay between the end of the Line Reversal
and the start of the Dual Tone Alert Signal (DT-AS). This and the start of the Dual Tone Alert Signal (DT-AS). This
object is only used when pktcSigDevCIDMode is lrAsETS. object is only used when pktcSigDevCIDMode is lrAsETS.
pktcSigDevCIDMode pktcSigDevCIDFskAfterLR pktcSigDevCIDMode pktcSigDevCIDFskAfterLR
duringringingETS 0 ms (not used) duringringingETS not used
dtAsETS 0 ms (not used) dtAsETS not used
rpAsETS 0 ms (not used) rpAsETS not used
lrAsETS 250 ms" lrAsETS 250 ms"
REFERENCE REFERENCE
" Refer to the ETS 300 659-1 Specification." "EN 300 659-1 Specification"
DEFVAL { 250 } DEFVAL { 250 }
::= {pktcSigDevConfigObjects 31 } ::= {pktcSigDevConfigObjects 31 }
pktcSigDevVmwiMode OBJECT-TYPE
SYNTAX INTEGER {
dtAsETS(1),
rpAsETS(2),
lrAsETS(3)
}
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This object is used for ETSI systems only. For visual
message waiting indicator (VMWI), pktcSigDevVmwiMode
selects the alerting signal method. For the dtAsETS,
rpAsETS, and lrAsETS methods, the FSK containing the
VMWI information is sent after an alerting signal. For the
dtAsETS method, the FSK is sent after the Dual Tone Alert
Signal. For the rpAsETS method, the FSK is sent after a
Ring Pulse. For the lrAsETS method, the Line Reversal
occurs first, then the Dual Tone Alert Signal, and finally
the FSK is sent."
DEFVAL { dtAsETS }
::= {pktcSigDevConfigObjects 32 }
pktcSigDevVmwiFskAfterDTAS OBJECT-TYPE
SYNTAX Unsigned32 (45..500)
UNITS "Milliseconds"
PacketCable/IPCablecom NCS Signaling MIB October 2003
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This object is used for ETSI systems only. This object
specifies the delay between the end of the Dual Tone
Alert Signal (DT-AS) and the start of the transmission of
the FSK containing the VMWI information. This object
is only used when pktcSigDevVmwiMode is dtAsETS or
lrAsETS.
pktcSigDevVmwiMode pktcSigDevVmwiFskAfterDTAS
dtAsETS 50 ms
rpAsETS not used
lrAsETS 50 ms"
REFERENCE
"EN 300 659-1 Specification"
DEFVAL { 50 }
::= {pktcSigDevConfigObjects 33 }
pktcSigDevVmwiFskAfterRPAS OBJECT-TYPE
SYNTAX Unsigned32 (500..800)
UNITS "Milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This object is used for ETSI systems only. This object
specifies the delay between the end of the Ring Pulse
Alert Signal (RP-AS) and the start of the transmission of
the FSK containing the VMWI information. This object
is only used when pktcSigDevVmwiMode is rpAsETS.
pktcSigDevVmwiMode pktcSigDevVmwiFskAfterRPAS
dtAsETS not used
rpAsETS 650 ms
lrAsETS not used "
REFERENCE
"EN 300 659-1 Specification"
DEFVAL { 650 }
::= {pktcSigDevConfigObjects 34 }
pktcSigDevVmwiDTASAfterLR OBJECT-TYPE
SYNTAX Unsigned32 (0..655)
UNITS "Milliseconds"
MAX-ACCESS read-write
STATUS current
DESCRIPTION
" This object is used for ETSI systems only. This object
specifies the delay between the end of the Line Reversal
and the start of the Dual Tone Alert Signal (DT-AS) for
PacketCable/IPCablecom NCS Signaling MIB October 2003
VMWI information. This object is only used when
pktcSigDevVmwiMode is lrAsETS.
pktcSigDevVmwiMode pktcSigDevVmwiDTASAfterLR
dtAsETS not used
rpAsETS not used
lrAsETS 250 ms "
REFERENCE
"EN 300 659-1 Specification"
DEFVAL { 250 }
::= {pktcSigDevConfigObjects 35 }
pktcSigDevRingCadenceTable OBJECT-TYPE pktcSigDevRingCadenceTable OBJECT-TYPE
SYNTAX SEQUENCE OF PktcSigDevRingCadenceEntry SYNTAX SEQUENCE OF PktcSigDevRingCadenceEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" In V5.2, Cadence rings are defined by the telco governing " In V5.2, Cadence rings are defined by the telco governing
body for each country. The MTA must be able to support body for each country. The MTA must be able to support
various ranges of cadence patterns and cadence periods. various ranges of cadence patterns and cadence periods.
The MTA will be able to support country specific The MTA will be able to support country specific
provisioning of the cadence and idle period. There will be provisioning of the cadence and idle period. There will be
at most 3 on/off transitions per cadence period. Each at most 3 on/off transitions per cadence period. Each
cadence pattern will be assigned a unique value ranging cadence pattern will be assigned a unique value ranging
from 1-128 corresponding to the value sent by the LE from 1-128 corresponding to the value sent by the LE
SIGNAL message plus one. The MTA will derive the cadence SIGNAL message plus one. The MTA will derive the cadence
periods from the ring Cadence table entry as provisioned periods from the ring Cadence table entry as provisioned
by the customer." by the customer. Objects in this table do not persist
::= { pktcSigDevConfigObjects 32 } across MTA reboots."
::= { pktcSigDevConfigObjects 36 }
PacketCable/IPCablecom NCS Signaling MIB May 2003
pktcSigDevRingCadenceEntry OBJECT-TYPE pktcSigDevRingCadenceEntry OBJECT-TYPE
SYNTAX PktcSigDevRingCadenceEntry SYNTAX PktcSigDevRingCadenceEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" Unique value ranging from 1 to 128 that corresponds to the " Unique value ranging from 1 to 128 that corresponds to the
value sent by the LE (plus one) based on country specific value sent by the LE (plus one) based on country specific
cadences, one row per cadence cycle. In any given system cadences, one row per cadence cycle. In any given system
implementation for a particular country, it is anticipated implementation for a particular country, it is anticipated
skipping to change at page 27, line 27 skipping to change at page 30, line 5
this table most likely will not be populated to its full this table most likely will not be populated to its full
128-row size." 128-row size."
INDEX { pktcSigDevRingCadenceIndex } INDEX { pktcSigDevRingCadenceIndex }
::= { pktcSigDevRingCadenceTable 1 } ::= { pktcSigDevRingCadenceTable 1 }
PktcSigDevRingCadenceEntry ::= SEQUENCE { PktcSigDevRingCadenceEntry ::= SEQUENCE {
pktcSigDevRingCadenceIndex Unsigned32, pktcSigDevRingCadenceIndex Unsigned32,
pktcSigDevRingCadence OCTET STRING pktcSigDevRingCadence OCTET STRING
} }
PacketCable/IPCablecom NCS Signaling MIB October 2003
pktcSigDevRingCadenceIndex OBJECT-TYPE pktcSigDevRingCadenceIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..128) SYNTAX Unsigned32 (1..128)
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" The table index equivalent to the country specific cadence " The table index equivalent to the country specific cadence
(1 - 128)." (1 - 128)."
::= { pktcSigDevRingCadenceEntry 1 } ::= { pktcSigDevRingCadenceEntry 1 }
pktcSigDevRingCadence OBJECT-TYPE pktcSigDevRingCadence OBJECT-TYPE
skipping to change at page 28, line 4 skipping to change at page 30, line 36
of the ring cadence. Only 216 Bits can be set total to of the ring cadence. Only 216 Bits can be set total to
represent 10800 ms of total cadence cycle." represent 10800 ms of total cadence cycle."
::= { pktcSigDevRingCadenceEntry 2 } ::= { pktcSigDevRingCadenceEntry 2 }
pktcSigDevStandardRingCadence OBJECT-TYPE pktcSigDevStandardRingCadence OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(2..28)) SYNTAX OCTET STRING (SIZE(2..28))
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This is the Ring Cadence Octet String for the standard " This is the Ring Cadence Octet String for the standard
PacketCable/IPCablecom NCS Signaling MIB May 2003
ring. The first octet of the bit string represents the ring. The first octet of the bit string represents the
length in bits of the duration of the cadence Each Bit length in bits of the duration of the cadence Each Bit
after the first octet represents 50 ms and 1 represents after the first octet represents 50 ms and 1 represents
ring and 0 represents silent. The first bit of the second ring and 0 represents silent. The first bit of the second
octet is the first bit of the ring cadence. Only 216 Bits octet is the first bit of the ring cadence. Only 216 Bits
can be set total to represent 10800 ms of total cadence can be set total to represent 10800 ms of total cadence
cycle." cycle."
::= { pktcSigDevConfigObjects 33 } ::= { pktcSigDevConfigObjects 37 }
pktcSigDevRingSplashCadence OBJECT-TYPE pktcSigDevRingSplashCadence OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(2..28)) SYNTAX OCTET STRING (SIZE(2..28))
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This is the Ring Cadence Octet String for splash ring. The " This is the Ring Cadence Octet String for splash ring. The
first octet of the bit string represents the length in first octet of the bit string represents the length in
bits of the duration of the cadence. Each Bit after the bits of the duration of the cadence. Each Bit after the
first octet represents 50 ms and 1 represents ring and 0 first octet represents 50 ms and 1 represents ring and 0
represents silent. The first bit of the second octet is represents silent. The first bit of the second octet is
PacketCable/IPCablecom NCS Signaling MIB October 2003
the first bit of the ring cadence. Only 216 Bits can be the first bit of the ring cadence. Only 216 Bits can be
set total to represent 10800 ms of total cadence cycle." set total to represent 10800 ms of total cadence cycle."
::= { pktcSigDevConfigObjects 34 } ::= { pktcSigDevConfigObjects 38 }
pktcSigDevToneTable OBJECT-TYPE pktcSigDevToneTable OBJECT-TYPE
SYNTAX SEQUENCE OF PktcSigDevToneEntry SYNTAX SEQUENCE OF PktcSigDevToneEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" The Tone Table defines the various tone operations." " The Tone Table defines the various tone operations. Any
::= { pktcSigDevConfigObjects 35 } definition of the tones callWaiting1-4 in this table
should just contain the audible tone itself and NOT
contain the delay between tones or the tone repeat count.
The delay between tones or the repeat count is controlled
by the MIB objects pktcNcsEndPntConfigCallWaitingDelay,
and pktcNcsEndPntConfigCallWaitingMaxRep. Objects in this
table do not persist across MTA reboots."
::= { pktcSigDevConfigObjects 39 }
pktcSigDevToneEntry OBJECT-TYPE pktcSigDevToneEntry OBJECT-TYPE
SYNTAX PktcSigDevToneEntry SYNTAX PktcSigDevToneEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" Unique value ranging from 1 to 49 that will correspond to " Unique value ranging from 0 to 38 that will correspond to
the different tone types that are being supported by the the different tone types that are being supported by the
device. These tones can be provisioned based on country device. These tones can be provisioned based on country
specific needs." specific needs."
INDEX { pktcSigDevToneType } INDEX { pktcSigDevToneType }
::= { pktcSigDevToneTable 1 } ::= { pktcSigDevToneTable 1 }
PktcSigDevToneEntry ::= SEQUENCE { PktcSigDevToneEntry ::= SEQUENCE {
pktcSigDevToneType INTEGER, pktcSigDevToneType INTEGER,
pktcSigDevToneDbLevel Integer32, pktcSigDevToneDbLevel Integer32,
pktcSigDevToneFreqType INTEGER, pktcSigDevToneFreqType INTEGER,
pktcSigDevToneNumFrequencies Unsigned32, pktcSigDevToneNumFrequencies Unsigned32,
pktcSigDevToneFirstFrequency Unsigned32, pktcSigDevToneFirstFrequency Unsigned32,
PacketCable/IPCablecom NCS Signaling MIB May 2003
pktcSigDevToneSecondFrequency Unsigned32, pktcSigDevToneSecondFrequency Unsigned32,
pktcSigDevToneThirdFrequency Unsigned32, pktcSigDevToneThirdFrequency Unsigned32,
pktcSigDevToneFourthFrequency Unsigned32, pktcSigDevToneFourthFrequency Unsigned32,
pktcSigDevToneNumOnOffTimes Unsigned32, pktcSigDevToneNumOnOffTimes Unsigned32,
pktcSigDevToneFirstToneOn Unsigned32, pktcSigDevToneFirstToneOn Unsigned32,
pktcSigDevToneFirstToneOff Unsigned32, pktcSigDevToneFirstToneOff Unsigned32,
pktcSigDevToneSecondToneOn Unsigned32, pktcSigDevToneSecondToneOn Unsigned32,
pktcSigDevToneSecondToneOff Unsigned32, pktcSigDevToneSecondToneOff Unsigned32,
pktcSigDevToneThirdToneOn Unsigned32, pktcSigDevToneThirdToneOn Unsigned32,
pktcSigDevToneThirdToneOff Unsigned32, pktcSigDevToneThirdToneOff Unsigned32,
pktcSigDevToneFourthToneOn Unsigned32, pktcSigDevToneFourthToneOn Unsigned32,
pktcSigDevToneFourthToneOff Unsigned32, pktcSigDevToneFourthToneOff Unsigned32,
PacketCable/IPCablecom NCS Signaling MIB October 2003
pktcSigDevToneWholeToneRepeatCount Unsigned32, pktcSigDevToneWholeToneRepeatCount Unsigned32,
pktcSigDevToneSteady TruthValue pktcSigDevToneSteady TruthValue
} }
pktcSigDevToneType OBJECT-TYPE pktcSigDevToneType OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
dtmf0(0), dtmf0(0),
dtmf1(1), dtmf1(1),
dtmf2(2), dtmf2(2),
dtmf3(3), dtmf3(3),
skipping to change at page 30, line 4 skipping to change at page 32, line 44
ringBack(21), ringBack(21),
reOrder(22), reOrder(22),
stutterdial(23), stutterdial(23),
loopback(24), loopback(24),
callWaiting1(25), callWaiting1(25),
callWaiting2(26), callWaiting2(26),
callWaiting3(27), callWaiting3(27),
callWaiting4(28), callWaiting4(28),
alertingSignal(29), alertingSignal(29),
testTone(30), testTone(30),
PacketCable/IPCablecom NCS Signaling MIB May 2003
specialDial(31), specialDial(31),
specialInfo(32), specialInfo(32),
release(33), release(33),
congestion(34), congestion(34),
userDefinedOne(35) userDefined1(35),
userDefined2(36),
userDefined3(37),
userDefined4(38)
} }
MAX-ACCESS read-only MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
PacketCable/IPCablecom NCS Signaling MIB October 2003
" This object defines the type of tone being accessed. Note: " This object defines the type of tone being accessed. Note:
the values are enumerated starting at zero (e.g., dtmf0) the values are enumerated starting at zero (e.g., dtmf0)
to correspond to the digits on the telephone keypad." to correspond to the digits on the telephone keypad."
::={pktcSigDevToneEntry 1 } ::={pktcSigDevToneEntry 1 }
pktcSigDevToneDbLevel OBJECT-TYPE pktcSigDevToneDbLevel OBJECT-TYPE
SYNTAX Integer32 (-60..4) SYNTAX Integer32 (-60..4)
UNITS "dbm" UNITS "dbm"
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This is the decibel level at which tones could be " This is the decibel level at which tones could be
generated." generated."
DEFVAL { -4 } DEFVAL { -4 }
::={pktcSigDevToneEntry 2 } ::={pktcSigDevToneEntry 2 }
pktcSigDevToneFreqType OBJECT-TYPE pktcSigDevToneFreqType OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
allFrequencies (1), allFrequencies (1),
singleFrequecySequence (2), singleFrequencySequence (2),
dualFrequencySequence (3), dualFrequencySequence (3),
allFrequenciesModulated (4) allFrequenciesModulated (4)
} }
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object describes how the frequencies are applied. " This object describes how the frequencies are applied.
allFrequencies indicates all frequences specifed by allFrequencies indicates all frequences specifed by
pktcSigDevToneNumFrequencies are mixed to form a single pktcSigDevToneNumFrequencies are mixed to form a single
tone. The tone is then applied in sequence using the tone. The tone is then applied in sequence using the
number of on/off times specified in number of on/off times specified in
pktcSigDevToneNumOnOffTimes. SingleFrequecySequence pktcSigDevToneNumOnOffTimes. SingleFrequecySequence
indicates all frequencies specified by indicates all frequencies specified by
pktcSigDevToneNumFrequencies are applied in sequence pktcSigDevToneNumFrequencies are applied in sequence
using the corresponding frequency number on/off time using the corresponding frequency number on/off time
(e.g., pktcSigDevToneFirstFrequency uses (e.g., pktcSigDevToneFirstFrequency uses
pktcSigDevToneFirstToneOn and pktcSigDevToneFirstToneOff, pktcSigDevToneFirstToneOn and pktcSigDevToneFirstToneOff,
pktcSigDevToneSecondFrequency uses pktcSigDevToneSecondFrequency uses
pktcSigDevToneSecondToneOn and pktcSigDevToneSecondToneOn and
pktcSigDevToneSecondToneOff). For this tone type pktcSigDevToneSecondToneOff). For this tone type
PacketCable/IPCablecom NCS Signaling MIB May 2003
pktcSigDevToneNumFrequencies MUST equal pktcSigDevToneNumFrequencies MUST equal
pktcSigDevToneNumOnOffTimes. DualFrequencySequence pktcSigDevToneNumOnOffTimes. DualFrequencySequence
indicates two pairs of frequencies are mixed to form two indicates two pairs of frequencies are mixed to form two
sequenced tones. The first and second frequency are mixed sequenced tones. The first and second frequency are mixed
to form tone one and are applied using to form tone one and are applied using
pktcSigDevToneFirstToneOn and pktcSigDevToneFirstToneOff. pktcSigDevToneFirstToneOn and pktcSigDevToneFirstToneOff.
The third and forth frequency are mixed to form tone two The third and forth frequency are mixed to form tone two
and are applied using pktcSigDevToneSecondToneOn and and are applied using pktcSigDevToneSecondToneOn and
pktcSigDevToneSecondToneOff. For this tone type pktcSigDevToneSecondToneOff. For this tone type
PacketCable/IPCablecom NCS Signaling MIB October 2003
pktcSigDevToneNumFrequencies MUST equal 4 and pktcSigDevToneNumFrequencies MUST equal 4 and
pktcSigDevToneNumOnOffTimes MUST equal 2. pktcSigDevToneNumOnOffTimes MUST equal 2.
allFrequenciesModulated indicates all frequencies allFrequenciesModulated indicates all frequencies
specified by pktcSigDevToneNumFrequencies are modulated to specified by pktcSigDevToneNumFrequencies are modulated to
form a single tone. The tone is then applied in sequence form a single tone. The tone is then applied in sequence
using the number of on/off times specified in using the number of on/off times specified in
pktcSigDevToneNumOnOffTimes." pktcSigDevToneNumOnOffTimes. For allFrequenciesModulated,
the pktcSigDevToneNumFrequencies MUST equal 2, and the
frequency in pktcSigDevToneFirstFrequency modulates the
frequency in pktcSigDevToneSecondFrequency."
DEFVAL { allFrequencies } DEFVAL { allFrequencies }
::={ pktcSigDevToneEntry 3 } ::={ pktcSigDevToneEntry 3 }
pktcSigDevToneNumFrequencies OBJECT-TYPE pktcSigDevToneNumFrequencies OBJECT-TYPE
SYNTAX Unsigned32 (1..4) SYNTAX Unsigned32 (1..4)
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" Specifies the number of frequencies specified in the table " Specifies the number of frequencies specified in the table
entry." entry."
skipping to change at page 32, line 5 skipping to change at page 34, line 50
pktcSigDevToneSecondFrequency OBJECT-TYPE pktcSigDevToneSecondFrequency OBJECT-TYPE
SYNTAX Unsigned32 (0..4000) SYNTAX Unsigned32 (0..4000)
UNITS "Hertz" UNITS "Hertz"
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This is the second frequency at which the tones could be " This is the second frequency at which the tones could be
generated in a multiple frequency tone." generated in a multiple frequency tone."
::={pktcSigDevToneEntry 6} ::={pktcSigDevToneEntry 6}
PacketCable/IPCablecom NCS Signaling MIB May 2003
pktcSigDevToneThirdFrequency OBJECT-TYPE pktcSigDevToneThirdFrequency OBJECT-TYPE
SYNTAX Unsigned32 (0..4000) SYNTAX Unsigned32 (0..4000)
UNITS "Hertz" UNITS "Hertz"
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
PacketCable/IPCablecom NCS Signaling MIB October 2003
" This is the third frequency at which the tones could be " This is the third frequency at which the tones could be
generated." generated."
::={pktcSigDevToneEntry 7} ::={pktcSigDevToneEntry 7}
pktcSigDevToneFourthFrequency OBJECT-TYPE pktcSigDevToneFourthFrequency OBJECT-TYPE
SYNTAX Unsigned32 (0..4000) SYNTAX Unsigned32 (0..4000)
UNITS "Hertz" UNITS "Hertz"
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
skipping to change at page 33, line 4 skipping to change at page 35, line 50
pktcSigDevToneFirstToneOff OBJECT-TYPE pktcSigDevToneFirstToneOff OBJECT-TYPE
SYNTAX Unsigned32 (0..5000) SYNTAX Unsigned32 (0..5000)
UNITS "Milliseconds" UNITS "Milliseconds"
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This is the first idle interval." " This is the first idle interval."
::={ pktcSigDevToneEntry 11 } ::={ pktcSigDevToneEntry 11 }
pktcSigDevToneSecondToneOn OBJECT-TYPE pktcSigDevToneSecondToneOn OBJECT-TYPE
PacketCable/IPCablecom NCS Signaling MIB May 2003
SYNTAX Unsigned32 (0..5000) SYNTAX Unsigned32 (0..5000)
UNITS "Milliseconds" UNITS "Milliseconds"
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This is the second tone interval." " This is the second tone interval."
PacketCable/IPCablecom NCS Signaling MIB October 2003
::={ pktcSigDevToneEntry 12 } ::={ pktcSigDevToneEntry 12 }
pktcSigDevToneSecondToneOff OBJECT-TYPE pktcSigDevToneSecondToneOff OBJECT-TYPE
SYNTAX Unsigned32 (0..5000) SYNTAX Unsigned32 (0..5000)
UNITS "Milliseconds" UNITS "Milliseconds"
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This is the second idle interval." " This is the second idle interval."
::={ pktcSigDevToneEntry 13 } ::={ pktcSigDevToneEntry 13 }
skipping to change at page 34, line 4 skipping to change at page 36, line 50
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This is the fourth tone interval." " This is the fourth tone interval."
::={ pktcSigDevToneEntry 16 } ::={ pktcSigDevToneEntry 16 }
pktcSigDevToneFourthToneOff OBJECT-TYPE pktcSigDevToneFourthToneOff OBJECT-TYPE
SYNTAX Unsigned32 (0..5000) SYNTAX Unsigned32 (0..5000)
UNITS "Milliseconds" UNITS "Milliseconds"
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
PacketCable/IPCablecom NCS Signaling MIB May 2003
DESCRIPTION DESCRIPTION
" This is the Fourth idle interval." " This is the Fourth idle interval."
::={ pktcSigDevToneEntry 17 } ::={ pktcSigDevToneEntry 17 }
pktcSigDevToneWholeToneRepeatCount OBJECT-TYPE pktcSigDevToneWholeToneRepeatCount OBJECT-TYPE
SYNTAX Unsigned32 (0..5000) SYNTAX Unsigned32 (0..5000)
PacketCable/IPCablecom NCS Signaling MIB October 2003
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This is the repeat count, which signifies how many times " This is the repeat count, which signifies how many times
to repeat the entire on-off sequence." to repeat the entire on-off sequence."
::={ pktcSigDevToneEntry 18 } ::={ pktcSigDevToneEntry 18 }
pktcSigDevToneSteady OBJECT-TYPE pktcSigDevToneSteady OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This is the steady tone. Set to true to continue the " This is the steady tone. Device must playout the on-off
last tone after on-off sequence." sequence for pktcSigDevToneWholeRepeatCount times and
then apply the last tone forever."
::={ pktcSigDevToneEntry 19 } ::={ pktcSigDevToneEntry 19 }
-- --
-- The following Table provides endpoint configuration information
-- that is common to all signaling Protocols. Currently only the
-- signaling index is present in an effort not to deprecate any MIB
-- objects.
--
pktcSigEndPntConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF PktcSigEndPntConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" This table describes the PacketCable endpoint selected
signaling type. The number of entries in this table
represents the number of provisioned endpoints.
For each conceptual row of pktcSigEndPntConfigTable
defined, an associated row MUST be defined in one on the
specific signaling tables such as
pktcNcsEndPntConfigTable."
::= { pktcSigEndPntConfigObjects 1 }
pktcSigEndPntConfigEntry OBJECT-TYPE
SYNTAX PktcSigEndPntConfigEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
" Entries in pktcSigEndPntConfigTable - Each entry describes
PacketCable/IPCablecom NCS Signaling MIB May 2003
what signaling type a particular endpoint uses."
INDEX { ifIndex }
::= { pktcSigEndPntConfigTable 1 }
PktcSigEndPntConfigEntry ::= SEQUENCE {
pktcSigEndPntCapabilityIndex Unsigned32
}
pktcSigEndPntCapabilityIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..255)
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The associated index value in the pktcSigCapablityTable."
::= { pktcSigEndPntConfigEntry 1 }
--
-- The NCS End Point Config Table is used to define attributes that -- The NCS End Point Config Table is used to define attributes that
-- are specific to connection EndPoints. -- are specific to connection EndPoints.
-- --
pktcNcsEndPntConfigTable OBJECT-TYPE pktcNcsEndPntConfigTable OBJECT-TYPE
SYNTAX SEQUENCE OF PktcNcsEndPntConfigEntry SYNTAX SEQUENCE OF PktcNcsEndPntConfigEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This table describes the PacketCable NCS EndPoint " This table describes the information pertaining to each
selected signaling type. The number of entries in this endpoint of the MTA. All entries in this table represent
table represents the number of provisioned endpoints. the provisioned endpoints provisioned with the information
For each conceptual row of pktcSigEndPntConfigTable required by the MTA to maintain the NCS signaling protocol
Defined, an associated row MUST be defined in one of communication with the CMS. Each endpoint can be assigned
The specific signaling tables such as the to a its own CMS. If the specific endpoint does not have
PktcNcsEndPntConfigTable." the corresponding CMS information in this table, the
endpoint is considered as not provisioned with voice
services. Objects in this table do not persist across
MTA reboots."
::= { pktcNcsEndPntConfigObjects 1 } ::= { pktcNcsEndPntConfigObjects 1 }
pktcNcsEndPntConfigEntry OBJECT-TYPE pktcNcsEndPntConfigEntry OBJECT-TYPE
SYNTAX PktcNcsEndPntConfigEntry SYNTAX PktcNcsEndPntConfigEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" Entries in pktcNcsEndPntConfigTable Each entry describes " Entries in pktcNcsEndPntConfigTable Each entry
what signaling type a particular endpoint uses." represents the required signaling parameters for the
specific endpoint provisioned with voice services."
INDEX { ifIndex } INDEX { ifIndex }
::= { pktcNcsEndPntConfigTable 1 } ::= { pktcNcsEndPntConfigTable 1 }
PacketCable/IPCablecom NCS Signaling MIB October 2003
PktcNcsEndPntConfigEntry ::= SEQUENCE { PktcNcsEndPntConfigEntry ::= SEQUENCE {
pktcNcsEndPntConfigCallAgentId SnmpAdminString, pktcNcsEndPntConfigCallAgentId SnmpAdminString,
pktcNcsEndPntConfigCallAgentUdpPort InetPortNumber, pktcNcsEndPntConfigCallAgentUdpPort InetPortNumber,
pktcNcsEndPntConfigPartialDialTO Unsigned32, pktcNcsEndPntConfigPartialDialTO Unsigned32,
PacketCable/IPCablecom NCS Signaling MIB May 2003
pktcNcsEndPntConfigCriticalDialTO Unsigned32, pktcNcsEndPntConfigCriticalDialTO Unsigned32,
pktcNcsEndPntConfigBusyToneTO Unsigned32, pktcNcsEndPntConfigBusyToneTO Unsigned32,
pktcNcsEndPntConfigDialToneTO Unsigned32, pktcNcsEndPntConfigDialToneTO Unsigned32,
pktcNcsEndPntConfigMessageWaitingTO Unsigned32, pktcNcsEndPntConfigMessageWaitingTO Unsigned32,
pktcNcsEndPntConfigOffHookWarnToneTO Unsigned32, pktcNcsEndPntConfigOffHookWarnToneTO Unsigned32,
pktcNcsEndPntConfigRingingTO Unsigned32, pktcNcsEndPntConfigRingingTO Unsigned32,
pktcNcsEndPntConfigRingBackTO Unsigned32, pktcNcsEndPntConfigRingBackTO Unsigned32,
pktcNcsEndPntConfigReorderToneTO Unsigned32, pktcNcsEndPntConfigReorderToneTO Unsigned32,
pktcNcsEndPntConfigStutterDialToneTO Unsigned32, pktcNcsEndPntConfigStutterDialToneTO Unsigned32,
pktcNcsEndPntConfigTSMax Unsigned32, pktcNcsEndPntConfigTSMax Unsigned32,
skipping to change at page 36, line 41 skipping to change at page 38, line 45
pktcNcsEndPntConfigCallWaitingDelay Unsigned32, pktcNcsEndPntConfigCallWaitingDelay Unsigned32,
pktcNcsEndPntStatusCallIpAddressType InetAddressType, pktcNcsEndPntStatusCallIpAddressType InetAddressType,
pktcNcsEndPntStatusCallIpAddress InetAddress, pktcNcsEndPntStatusCallIpAddress InetAddress,
pktcNcsEndPntStatusError INTEGER, pktcNcsEndPntStatusError INTEGER,
pktcNcsEndPntConfigMinHookFlash Unsigned32, pktcNcsEndPntConfigMinHookFlash Unsigned32,
pktcNcsEndPntConfigMaxHookFlash Unsigned32, pktcNcsEndPntConfigMaxHookFlash Unsigned32,
pktcNcsEndPntConfigPulseDialInterdigitTime Unsigned32, pktcNcsEndPntConfigPulseDialInterdigitTime Unsigned32,
pktcNcsEndPntConfigPulseDialMinMakeTime Unsigned32, pktcNcsEndPntConfigPulseDialMinMakeTime Unsigned32,
pktcNcsEndPntConfigPulseDialMaxMakeTime Unsigned32, pktcNcsEndPntConfigPulseDialMaxMakeTime Unsigned32,
pktcNcsEndPntConfigPulseDialMinBreakTime Unsigned32, pktcNcsEndPntConfigPulseDialMinBreakTime Unsigned32,
pktcNcsEndPntConfigPulseDialMaxBreakTime Unsigned32, pktcNcsEndPntConfigPulseDialMaxBreakTime Unsigned32
pktcNcsEndPntConfigNomJitterBufferSize Unsigned32,
pktcNcsEndPntConfigMaxJitterBufferSize Unsigned32,
pktcNcsEndPntConfigOnHookDebounce Unsigned32,
pktcNcsEndPntConfigOffHookDebounce Unsigned32,
pktcNcsEndPntConfigTxGain Integer32,
pktcNcsEndPntConfigRxGain Integer32
} }
pktcNcsEndPntConfigCallAgentId OBJECT-TYPE pktcNcsEndPntConfigCallAgentId OBJECT-TYPE
SYNTAX SnmpAdminString(SIZE (3..255)) SYNTAX SnmpAdminString(SIZE (3..255))
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object contains a string indicating the call agent " This object contains a string indicating the call agent
name. (e.g.,: ca@example.com). The call agent name after
PacketCable/IPCablecom NCS Signaling MIB May 2003 PacketCable/IPCablecom NCS Signaling MIB October 2003
name. (e.g.,: ca@abc.def.com). The call agent name after
the @ character must be a fully qualified domain name and the @ character must be a fully qualified domain name and
have a corresponding pktcMtaDevCmsFqdn entry in the have a corresponding pktcMtaDevCmsFqdn entry in the
pktcMtaDevCmsTable. The object pktcMtaDevCmsFqdn is pktcMtaDevCmsTable. The object pktcMtaDevCmsFqdn is
defined in the PacketCable MIBMTA Specification." defined in the PacketCable MIBMTA Specification."
::= { pktcNcsEndPntConfigEntry 1 } ::= { pktcNcsEndPntConfigEntry 1 }
pktcNcsEndPntConfigCallAgentUdpPort OBJECT-TYPE pktcNcsEndPntConfigCallAgentUdpPort OBJECT-TYPE
SYNTAX InetPortNumber (1025..65535) SYNTAX InetPortNumber (1025..65535)
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object contains the call agent User Datagram Protocol " This object contains the call agent User Datagram Protocol
(UDP) receive port that is being used for this instance of (UDP) receive port that is being used for this instance of
call signaling, i.e. the default port on which the call call signaling, i.e. the default port on which the call
agent will receive NCS signaling from the endpoint." agent will receive NCS signaling from the endpoint."
REFERENCE REFERENCE
" Refer to the IPCablecom/PacketCable NCS Specification." "PacketCable NCS Specification"
DEFVAL { 2727 } DEFVAL { 2727 }
::= { pktcNcsEndPntConfigEntry 2 } ::= { pktcNcsEndPntConfigEntry 2 }
pktcNcsEndPntConfigPartialDialTO OBJECT-TYPE pktcNcsEndPntConfigPartialDialTO OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object contains maximum value of the partial dial " This object contains maximum value of the partial dial
time out." time out."
REFERENCE REFERENCE
" Refer to the IPCablecom/PacketCable NCS Specification." "PacketCable NCS Specification"
DEFVAL { 16 } DEFVAL { 16 }
::= { pktcNcsEndPntConfigEntry 3 } ::= { pktcNcsEndPntConfigEntry 3 }
pktcNcsEndPntConfigCriticalDialTO OBJECT-TYPE pktcNcsEndPntConfigCriticalDialTO OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object contains the maximum value of the critical " This object contains the maximum value of the critical
dial time out." dial time out."
REFERENCE REFERENCE
" Refer to the IPCablecom/PacketCable NCS Specification." "PacketCable NCS Specification"
DEFVAL { 4 } DEFVAL { 4 }
::= { pktcNcsEndPntConfigEntry 4 } ::= { pktcNcsEndPntConfigEntry 4 }
pktcNcsEndPntConfigBusyToneTO OBJECT-TYPE pktcNcsEndPntConfigBusyToneTO OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "seconds"
PacketCable/IPCablecom NCS Signaling MIB May 2003 PacketCable/IPCablecom NCS Signaling MIB October 2003
UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object contains the timeout value for busy tone." " This object contains the timeout value for busy tone."
REFERENCE REFERENCE
" Refer to the IPCablecom/PacketCable NCS Specification." "PacketCable NCS Specification"
DEFVAL { 30 } DEFVAL { 30 }
::= { pktcNcsEndPntConfigEntry 5 } ::= { pktcNcsEndPntConfigEntry 5 }
pktcNcsEndPntConfigDialToneTO OBJECT-TYPE pktcNcsEndPntConfigDialToneTO OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object contains the timeout value for dial tone." " This object contains the timeout value for dial tone."
REFERENCE REFERENCE
" Refer to the IPCablecom/PacketCable NCS Specification." "PacketCable NCS Specification"
DEFVAL { 16 } DEFVAL { 16 }
::= { pktcNcsEndPntConfigEntry 6 } ::= { pktcNcsEndPntConfigEntry 6 }
pktcNcsEndPntConfigMessageWaitingTO OBJECT-TYPE pktcNcsEndPntConfigMessageWaitingTO OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object contains the timeout value for message waiting " This object contains the timeout value for message waiting
indicator." indicator."
REFERENCE REFERENCE
" Refer to the IPCablecom/PacketCable NCS Specification." "PacketCable NCS Specification"
DEFVAL { 16 } DEFVAL { 16 }
::= { pktcNcsEndPntConfigEntry 7 } ::= { pktcNcsEndPntConfigEntry 7 }
pktcNcsEndPntConfigOffHookWarnToneTO OBJECT-TYPE pktcNcsEndPntConfigOffHookWarnToneTO OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object contains timeout value for off hook Warning " This object contains timeout value for off hook Warning
tone." tone."
REFERENCE REFERENCE
" Refer to the IPCablecom/PacketCable NCS Specification." "PacketCable NCS Specification"
DEFVAL { 0 } DEFVAL { 0 }
::= { pktcNcsEndPntConfigEntry 8 } ::= { pktcNcsEndPntConfigEntry 8 }
pktcNcsEndPntConfigRingingTO OBJECT-TYPE pktcNcsEndPntConfigRingingTO OBJECT-TYPE
SYNTAX Unsigned32
PacketCable/IPCablecom NCS Signaling MIB May 2003 PacketCable/IPCablecom NCS Signaling MIB October 2003
SYNTAX Unsigned32
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object contains the timeout value for ringing." " This object contains the timeout value for ringing."
REFERENCE REFERENCE
" Refer to the IPCablecom/PacketCable NCS Specification." "PacketCable NCS Specification"
DEFVAL { 180 } DEFVAL { 180 }
::= { pktcNcsEndPntConfigEntry 9 } ::= { pktcNcsEndPntConfigEntry 9 }
pktcNcsEndPntConfigRingBackTO OBJECT-TYPE pktcNcsEndPntConfigRingBackTO OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object contains the timeout value for ring back." " This object contains the timeout value for ring back."
REFERENCE REFERENCE
" Refer to the IPCablecom/PacketCable NCS Specification." "PacketCable NCS Specification"
DEFVAL { 180 } DEFVAL { 180 }
::= { pktcNcsEndPntConfigEntry 10 } ::= { pktcNcsEndPntConfigEntry 10 }
pktcNcsEndPntConfigReorderToneTO OBJECT-TYPE pktcNcsEndPntConfigReorderToneTO OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object contains the timeout value for reorder tone." " This object contains the timeout value for reorder tone."
REFERENCE REFERENCE
" Refer to the IPCablecom/PacketCable NCS Specification." "PacketCable NCS Specification"
DEFVAL { 30 } DEFVAL { 30 }
::= { pktcNcsEndPntConfigEntry 11 } ::= { pktcNcsEndPntConfigEntry 11 }
pktcNcsEndPntConfigStutterDialToneTO OBJECT-TYPE pktcNcsEndPntConfigStutterDialToneTO OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object contains timeout value for stutter dial tone." " This object contains timeout value for stutter dial tone."
REFERENCE REFERENCE
" Refer to the IPCablecom/PacketCable NCS Specification." "PacketCable NCS Specification"
DEFVAL { 16 } DEFVAL { 16 }
::= { pktcNcsEndPntConfigEntry 12 } ::= { pktcNcsEndPntConfigEntry 12 }
pktcNcsEndPntConfigTSMax OBJECT-TYPE pktcNcsEndPntConfigTSMax OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
MAX-ACCESS read-create
PacketCable/IPCablecom NCS Signaling MIB May 2003 PacketCable/IPCablecom NCS Signaling MIB October 2003
MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object contains the max time in seconds since the " This object contains the max time in seconds since the
sending of the initial datagram." sending of the initial datagram."
REFERENCE REFERENCE
" Refer to the IPCablecom/PacketCable NCS Specification." "PacketCable NCS Specification"
DEFVAL { 20 } DEFVAL { 20 }
::= { pktcNcsEndPntConfigEntry 13 } ::= { pktcNcsEndPntConfigEntry 13 }
pktcNcsEndPntConfigMax1 OBJECT-TYPE pktcNcsEndPntConfigMax1 OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object contains the suspicious error threshold for " This object contains the suspicious error threshold for
signaling messages." signaling messages."
REFERENCE REFERENCE
" Refer to the IPCablecom/PacketCable NCS Specification." "PacketCable NCS Specification"
DEFVAL { 5 } DEFVAL { 5 }
::= { pktcNcsEndPntConfigEntry 14 } ::= { pktcNcsEndPntConfigEntry 14 }
pktcNcsEndPntConfigMax2 OBJECT-TYPE pktcNcsEndPntConfigMax2 OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object contains the disconnect error threshold for " This object contains the disconnect error threshold for
signaling messages." signaling messages."
REFERENCE REFERENCE
" Refer to the IPCablecom/PacketCable NCS Specification." "PacketCable NCS Specification"
DEFVAL { 7 } DEFVAL { 7 }
::= { pktcNcsEndPntConfigEntry 15 } ::= { pktcNcsEndPntConfigEntry 15 }
pktcNcsEndPntConfigMax1QEnable OBJECT-TYPE pktcNcsEndPntConfigMax1QEnable OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object enables/disables the Max1 Domain Name Server " This object enables/disables the Max1 Domain Name Server
(DNS) query operation when Max1 expires." (DNS) query operation when Max1 expires."
DEFVAL { true } DEFVAL { true }
::= { pktcNcsEndPntConfigEntry 16 } ::= { pktcNcsEndPntConfigEntry 16 }
pktcNcsEndPntConfigMax2QEnable OBJECT-TYPE pktcNcsEndPntConfigMax2QEnable OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object enables/disables the Max2 DNS query operation
PacketCable/IPCablecom NCS Signaling MIB May 2003 PacketCable/IPCablecom NCS Signaling MIB October 2003
" This object enables/disables the Max2 DNS query operation
when Max2 expires." when Max2 expires."
DEFVAL { true } DEFVAL { true }
::= { pktcNcsEndPntConfigEntry 17 } ::= { pktcNcsEndPntConfigEntry 17 }
pktcNcsEndPntConfigMWD OBJECT-TYPE pktcNcsEndPntConfigMWD OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" Maximum Waiting Delay (MWD) contains the maximum number of " Maximum Waiting Delay (MWD) contains the maximum number of
seconds a MTA waits after a restart. When this timer seconds a MTA waits after a restart. When this timer
expires the MTA initiates the restart procedure." expires the MTA initiates the restart procedure."
REFERENCE REFERENCE
" Refer to the IPCablecom/PacketCable NCS Specification." "PacketCable NCS Specification"
DEFVAL { 600 } DEFVAL { 600 }
::= { pktcNcsEndPntConfigEntry 18 } ::= { pktcNcsEndPntConfigEntry 18 }
pktcNcsEndPntConfigTdinit OBJECT-TYPE pktcNcsEndPntConfigTdinit OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object contains the initial number of seconds an MTA " This object contains the initial number of seconds the MTA
waits after a disconnect. When this timer expires the MTA waits after a disconnect. When this timer expires the MTA
initiates the disconnected procedure." initiates the disconnected procedure."
REFERENCE REFERENCE
" Refer to the IPCablecom/PacketCable NCS Specification." "PacketCable NCS Specification"
DEFVAL { 15 } DEFVAL { 15 }
::= { pktcNcsEndPntConfigEntry 19 } ::= { pktcNcsEndPntConfigEntry 19 }
pktcNcsEndPntConfigTdmin OBJECT-TYPE pktcNcsEndPntConfigTdmin OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object contains the minimum number of seconds an MTA " This object contains the minimum number of seconds the MTA
waits after a disconnect. When this timer expires the MTA waits after a disconnect. When this timer expires the MTA
initiates the disconnected procedure." initiates the disconnected procedure."
REFERENCE REFERENCE
" Refer to the IPCablecom/PacketCable NCS Specification." "PacketCable NCS Specification"
DEFVAL { 15 } DEFVAL { 15 }
::= { pktcNcsEndPntConfigEntry 20 } ::= { pktcNcsEndPntConfigEntry 20 }
pktcNcsEndPntConfigTdmax OBJECT-TYPE pktcNcsEndPntConfigTdmax OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "seconds"
PacketCable/IPCablecom NCS Signaling MIB May 2003 PacketCable/IPCablecom NCS Signaling MIB October 2003
UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object contains the maximum number of seconds an MTA " This object contains the maximum number of seconds the MTA
waits after a disconnect. When this timer expires the MTA waits after a disconnect. When this timer expires the MTA
initiates the disconnected procedure. initiates the disconnected procedure.
" "
REFERENCE REFERENCE
" Refer to the IPCablecom/PacketCable NCS Specification." "PacketCable NCS Specification"
DEFVAL { 600 } DEFVAL { 600 }
::= { pktcNcsEndPntConfigEntry 21 } ::= { pktcNcsEndPntConfigEntry 21 }
pktcNcsEndPntConfigRtoMax OBJECT-TYPE pktcNcsEndPntConfigRtoMax OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object contains the maximum number of seconds for the " This object contains the maximum number of seconds for the
retransmission timer. When this timer expires the MTA retransmission timer. When this timer expires the MTA
retransmits the message." retransmits the message."
REFERENCE REFERENCE
" Refer to the IPCablecom/PacketCable NCS Specification." "PacketCable NCS Specification"
DEFVAL { 4 } DEFVAL { 4 }
::= { pktcNcsEndPntConfigEntry 22 } ::= { pktcNcsEndPntConfigEntry 22 }
pktcNcsEndPntConfigRtoInit OBJECT-TYPE pktcNcsEndPntConfigRtoInit OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "milliseconds" UNITS "milliseconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object contains the initial number of seconds for the " This object contains the initial number of seconds for the
retransmission timer." retransmission timer."
REFERENCE REFERENCE
" Refer to the IPCablecom/PacketCable NCS Specification." "PacketCable NCS Specification"
DEFVAL { 200 } DEFVAL { 200 }
::= { pktcNcsEndPntConfigEntry 23 } ::= { pktcNcsEndPntConfigEntry 23 }
pktcNcsEndPntConfigLongDurationKeepAlive OBJECT-TYPE pktcNcsEndPntConfigLongDurationKeepAlive OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "minutes" UNITS "minutes"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" Specifies a timeout value in minutes for sending long " Specifies a timeout value in minutes for sending long
duration call notification message." duration call notification message."
REFERENCE REFERENCE
"PacketCable NCS Specification"
PacketCable/IPCablecom NCS Signaling MIB May 2003 PacketCable/IPCablecom NCS Signaling MIB October 2003
" Refer to the IPCablecom/PacketCable NCS Specification."
DEFVAL { 60 } DEFVAL { 60 }
::= { pktcNcsEndPntConfigEntry 24 } ::= { pktcNcsEndPntConfigEntry 24 }
pktcNcsEndPntConfigThist OBJECT-TYPE pktcNcsEndPntConfigThist OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" Timeout period in seconds before no response is declared." " Timeout period in seconds before no response is declared."
REFERENCE REFERENCE
" Refer to the IPCablecom/PacketCable NCS Specification." "PacketCable NCS Specification"
DEFVAL { 30 } DEFVAL { 30 }
::= { pktcNcsEndPntConfigEntry 25 } ::= { pktcNcsEndPntConfigEntry 25 }
pktcNcsEndPntConfigStatus OBJECT-TYPE pktcNcsEndPntConfigStatus OBJECT-TYPE
SYNTAX RowStatus SYNTAX RowStatus
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object contains the Row Status associated with the " This object contains the Row Status associated with the
pktsNcsEndPntTable. " pktsNcsEndPntTable. "
skipping to change at page 44, line 5 skipping to change at page 46, line 5
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object contains the delay between repetitions of the " This object contains the delay between repetitions of the
call waiting tone that the MTA will play from a single CMS call waiting tone that the MTA will play from a single CMS
request." request."
DEFVAL { 10 } DEFVAL { 10 }
::= { pktcNcsEndPntConfigEntry 28 } ::= { pktcNcsEndPntConfigEntry 28 }
PacketCable/IPCablecom NCS Signaling MIB May 2003 PacketCable/IPCablecom NCS Signaling MIB October 2003
pktcNcsEndPntStatusCallIpAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This object contains the type of Internet address of the
CMS currently being used for this endpoint."
::= { pktcNcsEndPntConfigEntry 29 }
pktcNcsEndPntStatusCallIpAddress OBJECT-TYPE pktcNcsEndPntStatusCallIpAddress OBJECT-TYPE
SYNTAX InetAddress SYNTAX InetAddress
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object contains the Internet address of the CMS " This object contains the Internet address of the CMS
currently being used for this endpoint. This Internet currently being used for this endpoint. This Internet
address is used to create the appropriate security address is used to create the appropriate security
association." association. The type of this IP address is determined by
::= { pktcNcsEndPntConfigEntry 29 } the value of the pktcNcsEndPntStatusCallIpAddressType
object."
::= { pktcNcsEndPntConfigEntry 30 }
pktcNcsEndPntStatusError OBJECT-TYPE pktcNcsEndPntStatusError OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
operational (1), operational (1),
noSecurityAssociation (2), noSecurityAssociation (2),
disconnected (3) disconnected (3)
} }
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
skipping to change at page 44, line 44 skipping to change at page 46, line 55
Otherwise, the state is unused. The disconnected status Otherwise, the state is unused. The disconnected status
indicates one of the following two: indicates one of the following two:
If pktcMtaDevCmsIpsecCtrl is disabled, then no security If pktcMtaDevCmsIpsecCtrl is disabled, then no security
association is involved with this endpoint. The NCS association is involved with this endpoint. The NCS
signaling software is in process of establishing the NCS signaling software is in process of establishing the NCS
signaling link via an RSIP exchange. signaling link via an RSIP exchange.
Otherwise, pktcMtaDevCmsIpsecCtrl is enabled, the security Otherwise, pktcMtaDevCmsIpsecCtrl is enabled, the security
Association has been established, and the NCS signaling Association has been established, and the NCS signaling
software is in process of establishing the NCS signaling software is in process of establishing the NCS signaling
link via an RSIP exchange." link via an RSIP exchange."
::= { pktcNcsEndPntConfigEntry 30 } ::= { pktcNcsEndPntConfigEntry 31 }
PacketCable/IPCablecom NCS Signaling MIB October 2003
pktcNcsEndPntConfigMinHookFlash OBJECT-TYPE pktcNcsEndPntConfigMinHookFlash OBJECT-TYPE
SYNTAX Unsigned32 (1..1000) SYNTAX Unsigned32 (20..1000)
UNITS "Milliseconds" UNITS "Milliseconds"
MAX-ACCESS read-create MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This is the minimum time a line needs to be on hook for a " This is the minimum time a line needs to be on hook for a
valid hook flash." valid hook flash. The value of this object MUST be
greater than the value of
pktcNcsEndPntConfigPulseMaxBreakTime. This object must
only be set via the configuration file during the
provisioning process."
DEFVAL { 300 } DEFVAL { 300 }
::= { pktcNcsEndPntConfigEntry 32 }
PacketCable/IPCablecom NCS Signaling MIB May 2003
::= { pktcNcsEndPntConfigEntry 31 }
pktcNcsEndPntConfigMaxHookFlash OBJECT-TYPE pktcNcsEndPntConfigMaxHookFlash OBJECT-TYPE
SYNTAX Unsigned32 (1..1800) SYNTAX Unsigned32 (20..500)
UNITS "Milliseconds" UNITS "Milliseconds"
MAX-ACCESS read-create MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This is the maximum time a line needs to be on hook for a " This is the maximum time a line needs to be on hook for a
valid hook flash." valid hook flash. This object must only be set via the
DEFVAL { 1000 } configuration file during the provisioning process."
::= { pktcNcsEndPntConfigEntry 32 } DEFVAL { 500 }
::= { pktcNcsEndPntConfigEntry 33 }
pktcNcsEndPntConfigPulseDialInterdigitTime OBJECT-TYPE pktcNcsEndPntConfigPulseDialInterdigitTime OBJECT-TYPE
SYNTAX Unsigned32 (100..1500) SYNTAX Unsigned32 (100..1500)
UNITS "Milliseconds" UNITS "Milliseconds"
MAX-ACCESS read-create MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This is the pulse dial inter-digit timeout." " This is the pulse dial inter-digit timeout. This object
must only be set via the configuration file during the
provisioning process."
DEFVAL { 100 } DEFVAL { 100 }
::= { pktcNcsEndPntConfigEntry 33 } ::= { pktcNcsEndPntConfigEntry 34 }
pktcNcsEndPntConfigPulseDialMinMakeTime OBJECT-TYPE pktcNcsEndPntConfigPulseDialMinMakeTime OBJECT-TYPE
SYNTAX Unsigned32 (1..200) SYNTAX Unsigned32 (20..200)
UNITS "Milliseconds" UNITS "Milliseconds"
MAX-ACCESS read-create MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This is the minimum make pulse width for the dial pulse." " This is the minimum make pulse width for the dial pulse.
This object must only be set via the configuration file
during the provisioning process."
PacketCable/IPCablecom NCS Signaling MIB October 2003
DEFVAL { 25 } DEFVAL { 25 }
::= { pktcNcsEndPntConfigEntry 34 } ::= { pktcNcsEndPntConfigEntry 35 }
pktcNcsEndPntConfigPulseDialMaxMakeTime OBJECT-TYPE pktcNcsEndPntConfigPulseDialMaxMakeTime OBJECT-TYPE
SYNTAX Unsigned32 (1..200) SYNTAX Unsigned32 (20..200)
UNITS "Milliseconds" UNITS "Milliseconds"
MAX-ACCESS read-create MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This is the maximum make pulse width for the dial pulse." " This is the maximum make pulse width for the dial pulse.
This object must only be set via the configuration file
during the provisioning process."
DEFVAL { 55 } DEFVAL { 55 }
::= { pktcNcsEndPntConfigEntry 35 } ::= { pktcNcsEndPntConfigEntry 36 }
pktcNcsEndPntConfigPulseDialMinBreakTime OBJECT-TYPE pktcNcsEndPntConfigPulseDialMinBreakTime OBJECT-TYPE
SYNTAX Unsigned32 (1..200) SYNTAX Unsigned32 (20..200)
UNITS "Milliseconds" UNITS "Milliseconds"
MAX-ACCESS read-create MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This is the minimum break pulse width for the dial pulse.
PacketCable/IPCablecom NCS Signaling MIB May 2003 This object must only be set via the configuration file
during the provisioning process."
" This is the minimum break pulse width for the dial pulse."
DEFVAL { 45 } DEFVAL { 45 }
::= { pktcNcsEndPntConfigEntry 36 } ::= { pktcNcsEndPntConfigEntry 37 }
pktcNcsEndPntConfigPulseDialMaxBreakTime OBJECT-TYPE pktcNcsEndPntConfigPulseDialMaxBreakTime OBJECT-TYPE
SYNTAX Unsigned32 (1..200) SYNTAX Unsigned32 (20..200)
UNITS "Milliseconds" UNITS "Milliseconds"
MAX-ACCESS read-create MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This is the maximum break pulse width for the dial pulse." " This is the maximum break pulse width for the dial pulse.
This object must only be set via the configuration file
during the provisioning process."
DEFVAL { 75 } DEFVAL { 75 }
::= { pktcNcsEndPntConfigEntry 37 }
pktcNcsEndPntConfigNomJitterBufferSize OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The current setting for the nominal amount of jitter the
MTA can compensate."
::= { pktcNcsEndPntConfigEntry 38 } ::= { pktcNcsEndPntConfigEntry 38 }
pktcNcsEndPntConfigMaxJitterBufferSize OBJECT-TYPE
SYNTAX Unsigned32
UNITS "Milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The current setting for the maximum amount of jitter the
MTA can compensate ."
::= { pktcNcsEndPntConfigEntry 39 }
pktcNcsEndPntConfigOnHookDebounce OBJECT-TYPE
SYNTAX Unsigned32 (1..1000)
UNITS "Milliseconds"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The length of the on-hook debounce."
DEFVAL { 200 }
::= { pktcNcsEndPntConfigEntry 40 }
pktcNcsEndPntConfigOffHookDebounce OBJECT-TYPE
SYNTAX Unsigned32 (1..1000)
UNITS "Milliseconds"
MAX-ACCESS read-create
STATUS current
PacketCable/IPCablecom NCS Signaling MIB May 2003
DESCRIPTION
" The length of the off hook debounce."
DEFVAL { 100 }
::= { pktcNcsEndPntConfigEntry 41 }
pktcNcsEndPntConfigTxGain OBJECT-TYPE
SYNTAX Integer32 (-14..14)
UNITS "dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The per line transmitter gain."
DEFVAL { 0 }
::= { pktcNcsEndPntConfigEntry 42 }
pktcNcsEndPntConfigRxGain OBJECT-TYPE
SYNTAX Integer32 (-14..14)
UNITS "dB"
MAX-ACCESS read-create
STATUS current
DESCRIPTION
" The per line receiver gain."
DEFVAL { 0 }
::= { pktcNcsEndPntConfigEntry 43 }
pktcNcsEndPntStatusCallIpAddressType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS read-only
STATUS current
DESCRIPTION
" This object contains the type of Internet address of the
CMS currently being used for this endpoint."
::= { pktcNcsEndPntConfigEntry 44 }
-- --
-- notification group is for future extension. -- notification group is for future extension.
-- --
pktcSigNotification OBJECT IDENTIFIER ::= { pktcSigMib 2 0 } pktcSigNotification OBJECT IDENTIFIER ::= { pktcSigMib 0 }
pktcSigConformance OBJECT IDENTIFIER ::= { pktcSigMib 3 } pktcSigConformance OBJECT IDENTIFIER ::= { pktcSigMib 3 }
pktcSigCompliances OBJECT IDENTIFIER ::= { pktcSigConformance 1 } pktcSigCompliances OBJECT IDENTIFIER ::= { pktcSigConformance 1 }
pktcSigGroups OBJECT IDENTIFIER ::= { pktcSigConformance 2 } pktcSigGroups OBJECT IDENTIFIER ::= { pktcSigConformance 2 }
-- --
-- compliance statements -- compliance statements
PacketCable/IPCablecom NCS Signaling MIB October 2003
-- --
pktcSigBasicCompliance MODULE-COMPLIANCE pktcSigBasicCompliance MODULE-COMPLIANCE
STATUS current STATUS current
DESCRIPTION DESCRIPTION
PacketCable/IPCablecom NCS Signaling MIB May 2003
" The compliance statement for devices that implement " The compliance statement for devices that implement
Signaling on the MTA." Signaling on the MTA."
MODULE -- pktcSigMib MODULE -- pktcSigMib
-- --
-- unconditionally mandatory groups -- unconditionally mandatory groups
-- --
MANDATORY-GROUPS { MANDATORY-GROUPS {
skipping to change at page 48, line 43 skipping to change at page 49, line 48
-- --
-- units of conformance -- units of conformance
-- --
pktcSigGroup OBJECT-GROUP pktcSigGroup OBJECT-GROUP
OBJECTS { OBJECTS {
pktcSigDevCodecType, pktcSigDevCodecType,
pktcSigDevCodecMax, pktcSigDevCodecMax,
pktcSigDevEchoCancellation, pktcSigDevEchoCancellation,
pktcSigDevSilenceSuppression, pktcSigDevSilenceSuppression,
pktcSigDevConnectionMode,
pktcSigDevR0Cadence, pktcSigDevR0Cadence,
pktcSigDevR6Cadence, pktcSigDevR6Cadence,
pktcSigDevR7Cadence, pktcSigDevR7Cadence,
pktcSigDefCallSigDscp, pktcSigDefCallSigDscp,
pktcSigDefMediaStreamDscp, pktcSigDefMediaStreamDscp,
pktcSignalingType, pktcSignalingType,
pktcSignalingVersion, pktcSignalingVersion,
pktcSignalingVendorExtension, pktcSignalingVendorExtension,
pktcSigEndPntCapabilityIndex,
PacketCable/IPCablecom NCS Signaling MIB October 2003
pktcSigDefNcsReceiveUdpPort, pktcSigDefNcsReceiveUdpPort,
pktcSigServiceClassNameUS, pktcSigServiceClassNameUS,
pktcSigServiceClassNameDS, pktcSigServiceClassNameDS,
PacketCable/IPCablecom NCS Signaling MIB May 2003
pktcSigServiceClassNameMask, pktcSigServiceClassNameMask,
pktcSigNcsServiceFlowState, pktcSigNcsServiceFlowState,
pktcSigDevR1Cadence, pktcSigDevR1Cadence,
pktcSigDevR2Cadence, pktcSigDevR2Cadence,
pktcSigDevR3Cadence, pktcSigDevR3Cadence,
pktcSigDevR4Cadence, pktcSigDevR4Cadence,
pktcSigDevR5Cadence, pktcSigDevR5Cadence,
pktcSigDevRgCadence, pktcSigDevRgCadence,
pktcSigDevRsCadence, pktcSigDevRsCadence,
pktcSigDevRtCadence pktcSigDevRtCadence
skipping to change at page 49, line 53 skipping to change at page 51, line 4
pktcNcsEndPntConfigMWD, pktcNcsEndPntConfigMWD,
pktcNcsEndPntConfigTdinit, pktcNcsEndPntConfigTdinit,
pktcNcsEndPntConfigTdmin, pktcNcsEndPntConfigTdmin,
pktcNcsEndPntConfigTdmax, pktcNcsEndPntConfigTdmax,
pktcNcsEndPntConfigRtoMax, pktcNcsEndPntConfigRtoMax,
pktcNcsEndPntConfigRtoInit, pktcNcsEndPntConfigRtoInit,
pktcNcsEndPntConfigLongDurationKeepAlive, pktcNcsEndPntConfigLongDurationKeepAlive,
pktcNcsEndPntConfigThist, pktcNcsEndPntConfigThist,
pktcNcsEndPntConfigStatus, pktcNcsEndPntConfigStatus,
pktcNcsEndPntConfigCallWaitingMaxRep, pktcNcsEndPntConfigCallWaitingMaxRep,
PacketCable/IPCablecom NCS Signaling MIB October 2003
pktcNcsEndPntConfigCallWaitingDelay, pktcNcsEndPntConfigCallWaitingDelay,
pktcNcsEndPntStatusCallIpAddressType, pktcNcsEndPntStatusCallIpAddressType,
pktcNcsEndPntStatusCallIpAddress, pktcNcsEndPntStatusCallIpAddress,
PacketCable/IPCablecom NCS Signaling MIB May 2003
pktcNcsEndPntStatusError pktcNcsEndPntStatusError
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Group of objects for the NCS portion of the PacketCable "Group of objects for the NCS portion of the PacketCable
Signaling MIB. This is mandatory for NCS signaling." Signaling MIB. This is mandatory for NCS signaling."
::= { pktcSigGroups 2 } ::= { pktcSigGroups 2 }
pktcInternationalGroup OBJECT-GROUP pktcInternationalGroup OBJECT-GROUP
OBJECTS { OBJECTS {
pktcNcsEndPntConfigMinHookFlash, pktcNcsEndPntConfigMinHookFlash,
pktcNcsEndPntConfigMaxHookFlash, pktcNcsEndPntConfigMaxHookFlash,
pktcNcsEndPntConfigNomJitterBufferSize,
pktcNcsEndPntConfigMaxJitterBufferSize,
pktcNcsEndPntConfigOnHookDebounce,
pktcNcsEndPntConfigOffHookDebounce,
pktcNcsEndPntConfigTxGain,
pktcNcsEndPntConfigRxGain,
pktcNcsEndPntConfigPulseDialInterdigitTime, pktcNcsEndPntConfigPulseDialInterdigitTime,
pktcNcsEndPntConfigPulseDialMinMakeTime, pktcNcsEndPntConfigPulseDialMinMakeTime,
pktcNcsEndPntConfigPulseDialMaxMakeTime, pktcNcsEndPntConfigPulseDialMaxMakeTime,
pktcNcsEndPntConfigPulseDialMinBreakTime, pktcNcsEndPntConfigPulseDialMinBreakTime,
pktcNcsEndPntConfigPulseDialMaxBreakTime, pktcNcsEndPntConfigPulseDialMaxBreakTime,
pktcSigDevRingCadence, pktcSigDevRingCadence,
pktcSigDevStandardRingCadence, pktcSigDevStandardRingCadence,
pktcSigDevRingSplashCadence, pktcSigDevRingSplashCadence,
pktcSigDevCallerIdSigProtocol,
pktcSigDevCIDMode, pktcSigDevCIDMode,
pktcSigDevCIDFskAfterRing, pktcSigDevCIDFskAfterRing,
pktcSigDevCIDFskAfterDTAS, pktcSigDevCIDFskAfterDTAS,
pktcSigDevCIDFskAfterRPAS,
pktcSigDevCIDRingAfterFSK, pktcSigDevCIDRingAfterFSK,
pktcSigDevCIDDTASAfterLR, pktcSigDevCIDDTASAfterLR,
pktcSigDevVmwiMode,
pktcSigDevVmwiFskAfterDTAS,
pktcSigDevVmwiFskAfterRPAS,
pktcSigDevVmwiDTASAfterLR,
pktcSigPowerRingFrequency, pktcSigPowerRingFrequency,
pktcSigPCMCoding,
pktcSigPulseSignalDuration, pktcSigPulseSignalDuration,
pktcSigPulseSignalType, pktcSigPulseSignalType,
pktcSigPulseSignalDbLevel, pktcSigPulseSignalDbLevel,
pktcSigPulseSignalFrequency, pktcSigPulseSignalFrequency,
pktcSigPulseSignalRepeatCount, pktcSigPulseSignalRepeatCount,
pktcSigPulseSignalPauseDuration, pktcSigPulseSignalPauseDuration,
pktcSigDevToneType,
pktcSigDevToneDbLevel, pktcSigDevToneDbLevel,
pktcSigDevToneFreqType, pktcSigDevToneFreqType,
pktcSigDevToneNumFrequencies, pktcSigDevToneNumFrequencies,
pktcSigDevToneFirstFrequency, pktcSigDevToneFirstFrequency,
pktcSigDevToneSecondFrequency, pktcSigDevToneSecondFrequency,
pktcSigDevToneThirdFrequency, pktcSigDevToneThirdFrequency,
pktcSigDevToneFourthFrequency, pktcSigDevToneFourthFrequency,
pktcSigDevToneNumOnOffTimes, pktcSigDevToneNumOnOffTimes,
pktcSigDevToneFirstToneOn,
PacketCable/IPCablecom NCS Signaling MIB May 2003 PacketCable/IPCablecom NCS Signaling MIB October 2003
pktcSigDevToneFirstToneOn,
pktcSigDevToneFirstToneOff, pktcSigDevToneFirstToneOff,
pktcSigDevToneSecondToneOn, pktcSigDevToneSecondToneOn,
pktcSigDevToneSecondToneOff, pktcSigDevToneSecondToneOff,
pktcSigDevToneThirdToneOn, pktcSigDevToneThirdToneOn,
pktcSigDevToneThirdToneOff, pktcSigDevToneThirdToneOff,
pktcSigDevToneFourthToneOn, pktcSigDevToneFourthToneOn,
pktcSigDevToneFourthToneOff, pktcSigDevToneFourthToneOff,
pktcSigDevToneWholeToneRepeatCount, pktcSigDevToneWholeToneRepeatCount,
pktcSigDevToneSteady pktcSigDevToneSteady
} }
skipping to change at page 51, line 43 skipping to change at page 52, line 44
Angela Lyda Arris Interactive Angela Lyda Arris Interactive
Sasha Medvinsky Motorola Sasha Medvinsky Motorola
Roy Spitzer Telogy Networks, Inc. Roy Spitzer Telogy Networks, Inc.
Rick Vetter Motorola Rick Vetter Motorola
Itay Sherman Texas Instruments Itay Sherman Texas Instruments
Klaus Hermanns Cisco Systems Klaus Hermanns Cisco Systems
Eugene Nechamkin Broadcom Corp Eugene Nechamkin Broadcom Corp
Matt A. Osman CableLabs Matt A. Osman CableLabs
Jean-Francois Mule CableLabs Jean-Francois Mule CableLabs
Rich Woundy Comcast
Bert Wijnen Lucent
Mike Heard Consultant
6. Normative References 6. Normative References
[RFC2578] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J., [RFC2578] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
Rose, M. and S. Waldbusser, "Structure of Management Rose, M. and S. Waldbusser, "Structure of Management
Information Version 2 (SMIv2)", STD 58, RFC 2578, April Information Version 2 (SMIv2)", STD 58, RFC 2578, April
1999. 1999.
[RFC2579] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J., [RFC2579] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
PacketCable/IPCablecom NCS Signaling MIB October 2003
Rose, M. and S. Waldbusser, "Textual Conventions for Rose, M. and S. Waldbusser, "Textual Conventions for
SMIv2", STD 58, RFC 2579, April 1999. SMIv2", STD 58, RFC 2579, April 1999.
[RFC2580] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J., [RFC2580] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
PacketCable/IPCablecom NCS Signaling MIB May 2003
Rose, M. and S. Waldbusser, "Conformance Statements for Rose, M. and S. Waldbusser, "Conformance Statements for
SMIv2", STD 58, RFC 2580, April 1999. SMIv2", STD 58, RFC 2580, April 1999.
[RFC3289] Baker, F., Chan, K., Smith, A., "Management Information [RFC3289] Baker, F., Chan, K., Smith, A., "Management Information
Base for the Differentiated Services Architecture", RFC Base for the Differentiated Services Architecture", RFC
3289, May 2002. 3289, May 2002.
[RFC3291] Daniel, M., Haberman, B., Routhier, S., Schoenwaelder, J., [RFC3291] Daniel, M., Haberman, B., Routhier, S., Schoenwaelder, J.,
"Textual Conventions for Internet Network Addresses", RFC "Textual Conventions for Internet Network Addresses", RFC
3291, May 2002. 3291, May 2002.
[RFC3435] Andreasen, F., Foster, B., "Media Gateway Control Protocol --
(MGCP)", RFC 3435, January 2003. -- NOTES TO RFC EDITOR (to be removed prior to publication)
--
-- The I-D <draft-ietf-ops-rfc3291bis-01.txt> (or a successor) is
-- expected to eventually replace RFC 3291. If that draft (or a
-- successor) is published as an RFC prior to, or concurrently with
-- this document, then the normative reference [RFC3291] should be
-- updated to point to the replacement RFC, and the reference tag
-- [RFC3291] should be updated to match.
--
[PKT-SP-MGCP-IO7-030415] Packetcable Network-Based Call Signaling [PKT-SP-MGCP-IO7-030415] Packetcable Network-Based Call Signaling
Protocol Specification PKT-SP-EC-MGCP- Protocol Specification PKT-SP-EC-MGCP-
IO7-030415. IO7-030415.
[PKT-SP-PROV-IO6-030415] Packetcable MTA Device Provisioning [PKT-SP-PROV-IO6-030415] Packetcable MTA Device Provisioning
Specification PKT-SP-PROV-IO6-030415. Specification PKT-SP-PROV-IO6-030415.
[PKT-SP-CODEC-IO4-021018] Packetcable Audio/Video Codecs [PKT-SP-CODEC-IO4-021018] Packetcable Audio/Video Codecs
Specification PKT-SP-CODEC-IO4-021018. Specification PKT-SP-CODEC-IO4-021018.
7. Informative References 7. Informative References
[RFC3261] Rosenberg, J., Schulzrinne H., Camarillo, G., Johnston,
A., Peterson, J., Sparks, R., Handley, M., and Schooler,
E. "SIP: Session Initiation Protocol", RFC 3261, June
2002.
[RFC3410] Case, J., Mundy, R., Partain, D. and B. Stewart, [RFC3410] Case, J., Mundy, R., Partain, D. and B. Stewart,
"Introduction and Applicability Statements for Internet- "Introduction and Applicability Statements for Internet-
Standard Management Framework", RFC 3410, December 2002. Standard Management Framework", RFC 3410, December 2002.
[RFC2026] Bradner, S., "The Internet Standards Process, Revision 3", [RFC3435] Andreasen, F., Foster, B., "Media Gateway Control Protocol
RFC 2026, October 1996. (MGCP)", RFC 3435, January 2003.
[RFC3261] Rosenberg, J., Schulzrinne H., Camarillo, G., Johnston, PacketCable/IPCablecom NCS Signaling MIB October 2003
A., Peterson, J., Sparks, R., Handley, M., and Schooler,
E. "SIP: Session Initiation Protocol", RFC 3261, June
2002.
[PKT-SP-MIB-MTA-I06-030415] Packetcable MTA MIB Specification PKT- [PKT-SP-MIB-MTA-I07-030728] Packetcable MTA MIB Specification PKT-
SP-MIB-MTA-I06-030415. SP-MIB-MTA-I07-030728.
[ETSI TS 101 909-4] ETSI TS 101 909-4:"Access and Terminals (AT); [ETSI TS 101 909-4] ETSI TS 101 909-4:"Access and Terminals (AT);
Digital Broadband Cable Access to the Public Digital Broadband Cable Access to the Public
Telecommunications Network; IP Multimedia Time Telecommunications Network; IP Multimedia Time
Critical Services; Part 4: Network Call Critical Services; Part 4: Network Call
Signaling Protocol". Signaling Protocol".
[ETSI TS 101 909-9] ETSI TS 101 909-9:"Access and Terminals (AT); [ETSI TS 101 909-9] ETSI TS 101 909-9:"Access and Terminals (AT);
Digital Broadband Cable Access to the Public Digital Broadband Cable Access to the Public
PacketCable/IPCablecom NCS Signaling MIB May 2003
Telecommunications Network; IP Multimedia Time Telecommunications Network; IP Multimedia Time
Critical Services; Part 9: IPCablecom Network Critical Services; Part 9: IPCablecom Network
Call Signalling (NCS) MIB Requirements". Call Signalling (NCS) MIB Requirements".
[EN 300 001] EN 300 001 V1.5.1 (1998-10):"European Standard [EN 300 001] EN 300 001 V1.5.1 (1998-10):"European Standard
(Telecommunications series) Attachments to Public (Telecommunications series) Attachments to Public
Switched Telephone Network (PSTN); General technical Switched Telephone Network (PSTN); General technical
requirements for equipment connected to an analogue requirements for equipment connected to an analogue
subscriber interface in the PSTN; Chapter 3: Ringing subscriber interface in the PSTN; Chapter 3: Ringing
signal characteristics (national deviations are in signal characteristics (national deviations are in
skipping to change at page 53, line 44 skipping to change at page 55, line 4
objects are used to differentiate between various types of traffic objects are used to differentiate between various types of traffic
in the service provider network: in the service provider network:
pktcSigDefCallSigDscp pktcSigDefCallSigDscp
pktcSigDefMediaStreamDscp pktcSigDefMediaStreamDscp
pktcSigServiceClassNameMask pktcSigServiceClassNameMask
These objects may contain information that may be sensitive from a These objects may contain information that may be sensitive from a
business perspective. For example, they may represent a customer's business perspective. For example, they may represent a customer's
service contract that a service provider chooses to apply to a service contract that a service provider chooses to apply to a
PacketCable/IPCablecom NCS Signaling MIB October 2003
customer's ingress or egress traffic. If these objects are SET customer's ingress or egress traffic. If these objects are SET
maliciously, it may permit unmarked or inappropriately marked maliciously, it may permit unmarked or inappropriately marked
signaling and media traffic to enter the service provider network, signaling and media traffic to enter the service provider network,
resulting in unauthorized levels of service for customers. resulting in unauthorized levels of service for customers.
The following objects determine ring cadence, repeatable The following objects determine ring cadence, repeatable
characteristics, and signal duration for telephony operation: characteristics, signal duration, and caller id subscriber line
protocol for telephony operation:
pktcSigDevR0Cadence pktcSigDevR0Cadence
pktcSigDevR1Cadence pktcSigDevR1Cadence
pktcSigDevR2Cadence pktcSigDevR2Cadence
pktcSigDevR3Cadence pktcSigDevR3Cadence
PacketCable/IPCablecom NCS Signaling MIB May 2003
pktcSigDevR4Cadence pktcSigDevR4Cadence
pktcSigDevR5Cadence pktcSigDevR5Cadence
pktcSigDevR6Cadence pktcSigDevR6Cadence
pktcSigDevR7Cadence pktcSigDevR7Cadence
pktcSigDevRgCadence pktcSigDevRgCadence
pktcSigDevRsCadence pktcSigDevRsCadence
pktcSigDevRtCadence pktcSigDevRtCadence
pktcSigDevCallerIdSigProtocol
pktcSigPulseSignalDuration pktcSigPulseSignalDuration
pktcSigPulseSignalPauseDuration pktcSigPulseSignalPauseDuration
If these objects are SET maliciously, it may result in unwanted If these objects are SET maliciously, it may result in unwanted
operation, or a failure to obtain telephony service from client operation, or a failure to obtain telephony service from client
(MTA) devices. (MTA) devices.
The objects in the pktcNcsEndPntConfigTable are used for end point The objects in the pktcNcsEndPntConfigTable are used for end point
signaling. The pktcNcsEndPntConfigCallAgentId object contains the signaling. The pktcNcsEndPntConfigCallAgentId object contains the
name of the call agent, which includes the call agent FQDN. If this name of the call agent, which includes the call agent FQDN. If this
skipping to change at page 54, line 42 skipping to change at page 56, line 4
a MAX-ACCESS other than not-accessible) may be considered sensitive a MAX-ACCESS other than not-accessible) may be considered sensitive
or vulnerable in some network environments. It is thus important to or vulnerable in some network environments. It is thus important to
control even GET and/or NOTIFY access to these objects and possibly control even GET and/or NOTIFY access to these objects and possibly
to even encrypt the values of these objects when sending them over to even encrypt the values of these objects when sending them over
the network via SNMP. The most sensitive is the network via SNMP. The most sensitive is
pktcNcsEndPntStatusCallIpAddress within pktcNcsEndPntConfigTable. pktcNcsEndPntStatusCallIpAddress within pktcNcsEndPntConfigTable.
This information itself may be valuable to would-be attackers. This information itself may be valuable to would-be attackers.
SNMP versions prior to SNMPv3 did not include adequate security. SNMP versions prior to SNMPv3 did not include adequate security.
Even if the network itself is secure (for example by using IPSec), Even if the network itself is secure (for example by using IPSec),
PacketCable/IPCablecom NCS Signaling MIB October 2003
even then, there is no control as to who on the secure network is even then, there is no control as to who on the secure network is
allowed to access and GET/SET (read/change/create/delete) the allowed to access and GET/SET (read/change/create/delete) the
objects in this MIB module. objects in this MIB module.
It is RECOMMENDED that implementers consider the security features It is RECOMMENDED that implementers consider the security features
as provided by the SNMPv3 framework (see [RFC3410], section 8), as provided by the SNMPv3 framework (see [RFC3410], section 8),
including full support for the SNMPv3 cryptographic mechanisms (for including full support for the SNMPv3 cryptographic mechanisms (for
authentication and privacy). authentication and privacy).
Further, deployment of SNMP versions prior to SNMPv3 is NOT Further, deployment of SNMP versions prior to SNMPv3 is NOT
RECOMMENDED. Instead, it is RECOMMENDED to deploy SNMPv3 and to RECOMMENDED. Instead, it is RECOMMENDED to deploy SNMPv3 and to
enable cryptographic security. It is then a customer/operator enable cryptographic security. It is then a customer/operator
responsibility to ensure that the SNMP entity giving access to an responsibility to ensure that the SNMP entity giving access to an
instance of this MIB module is properly configured to give access to instance of this MIB module is properly configured to give access to
PacketCable/IPCablecom NCS Signaling MIB May 2003
the objects only to those principals (users) that have legitimate the objects only to those principals (users) that have legitimate
rights to indeed GET or SET (change/create/delete) them. rights to indeed GET or SET (change/create/delete) them.
9. Intellectual Property 9. Intellectual Property
The IETF takes no position regarding the validity or scope of any The IETF takes no position regarding the validity or scope of any
intellectual property or other rights that might be claimed to intellectual property or other rights that might be claimed to
pertain to the implementation or use of the technology described in pertain to the implementation or use of the technology described in
document or the extent to which any license under such rights might this document or the extent to which any license under such rights
or might not be available; neither does it represent that it has might or might not be available; neither does it represent that it
made any effort to identify any such rights. Information on the has made any effort to identify any such rights. Information on the
IETF's procedures with respect to rights in standards-track and IETF's procedures with respect to rights in standards-track and
standards-related documentation can be found in BCP-11. Copies of standards-related documentation can be found in BCP-11. Copies of
claims of rights made available for publication and any assurances claims of rights made available for publication and any assurances
of licenses to be made available, or the result of an attempt made of licenses to be made available, or the result of an attempt made
to obtain a general license or permission for the use of such to obtain a general license or permission for the use of such
proprietary rights by implementers or users of this specification proprietary rights by implementers or users of this specification
can be obtained from the IETF Secretariat. can be obtained from the IETF Secretariat.
The IETF invites any interested party to bring to its attention any The IETF invites any interested party to bring to its attention any
copyrights, patents or patent applications, or other proprietary copyrights, patents or patent applications, or other proprietary
rights that may cover technology that may be required to practice rights which may cover technology that may be required to practice
this standard. Please address the information to the IETF Executive this standard. Please address the information to the IETF Executive
Director. Director.
10. Authors' Addresses 10. Authors' Addresses
Gordon Beacham Gordon Beacham
Motorola BCS/DCG Motorola BCS/DCG
6450 Sequence Drive, Bldg. 1 6450 Sequence Drive, Bldg. 1
San Diego, CA 92121, USA San Diego, CA 92121, USA
+1 858-404-2335 +1 858-404-2335
gordon.beacham@motorola.com gordon.beacham@motorola.com
Satish Kumar Mudugere Eswaraiah Satish Kumar Mudugere Eswaraiah
PacketCable/IPCablecom NCS Signaling MIB October 2003
Texas Instruments India (P) Ltd., Texas Instruments India (P) Ltd.,
Golf view, Wind Tunnel Road Golf view, Wind Tunnel Road
Murugesh Palya Murugesh Palya
Bangalore - 560 017, INDIA Bangalore - 560 017, INDIA
+91 80 5269451 +91 80 5269451
satish.kumar@ti.com satish.kumar@ti.com
Sumanth Channabasappa Sumanth Channabasappa
Alopa Networks Inc Alopa Networks Inc
248, McCaslin Bvld #101, 248, McCaslin Bvld #101,
Louisville, Colorado - 80027 Louisville, Colorado - 80027
U.S.A. U.S.A.
+1 303 604 6595 +1 303 604 6595
Sumanth@alopa.com Sumanth@alopa.com
PacketCable/IPCablecom NCS Signaling MIB May 2003
11. Full Copyright Statement 11. Full Copyright Statement
The IETF takes no position regarding the validity or scope of any The IETF takes no position regarding the validity or scope of any
intellectual property or other rights that might be claimed to intellectual property or other rights that might be claimed to
pertain to the implementation or use of the technology described in pertain to the implementation or use of the technology described in
this document or the extent to which any license under such rights this document or the extent to which any license under such rights
might or might not be available; neither does it represent that it might or might not be available; neither does it represent that it
has made any effort to identify any such rights. Information on the has made any effort to identify any such rights. Information on the
IETF's procedures with respect to rights in standards-track and IETF's procedures with respect to rights in standards-track and
standards-related documentation can be found in BCP-11. Copies of standards-related documentation can be found in BCP-11. Copies of
skipping to change at page 56, line 41 skipping to change at page 58, line 4
This document and translations of it may be copied and furnished to This document and translations of it may be copied and furnished to
others, and derivative works that comment on or otherwise explain it others, and derivative works that comment on or otherwise explain it
or assist in its implmentation may be prepared, copied, published or assist in its implmentation may be prepared, copied, published
and distributed, in whole or in part, without restriction of any and distributed, in whole or in part, without restriction of any
kind, provided that the above copyright notice and this paragraph kind, provided that the above copyright notice and this paragraph
are included on all such copies and derivative works. However, this are included on all such copies and derivative works. However, this
document itself may not be modified in any way, such as by removing document itself may not be modified in any way, such as by removing
the copyright notice or references to the Internet Society or other the copyright notice or references to the Internet Society or other
Internet organizations, except as needed for the purpose of Internet organizations, except as needed for the purpose of
developing Internet standards in which case the procedures for developing Internet standards in which case the procedures for
PacketCable/IPCablecom NCS Signaling MIB October 2003
copyrights defined in the Internet Standards process must be copyrights defined in the Internet Standards process must be
followed, or as required to translate it into languages other than followed, or as required to translate it into languages other than
English. English.
The limited permissions granted above are perpetual and will not be The limited permissions granted above are perpetual and will not be
revoked by the Internet Society or its successors or assigns. revoked by the Internet Society or its successors or assigns.
This document and the information contained herein is provided on an This document and the information contained herein is provided on an
"AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING
TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING
 End of changes. 

This html diff was produced by rfcdiff 1.23, available from http://www.levkowetz.com/ietf/tools/rfcdiff/