draft-ietf-ipcdn-pktc-signaling-04.txt   draft-ietf-ipcdn-pktc-signaling-05.txt 
IPCDN IPCDN
Internet Draft Gordon Beacham Internet Draft Gordon Beacham
Document: draft-ietf-ipcdn-pktc-signaling- Motorola, Inc Document: draft-ietf-ipcdn-pktc-signaling- Motorola, Inc
04.txt 05.txt
Satish Kumar Satish Kumar
Texas Instruments Texas Instruments
Sumanth Sumanth
Channabasappa Channabasappa
Alopa Networks Alopa Networks
Inc Inc
Expires: December 2004 July 2004 Expires: December 2004 July 2004
Network-Based Call Signaling (NCS) Signaling MIB for PacketCable and Network-Based Call Signaling (NCS) Signaling MIB for PacketCable and
IPCablecom Multimedia Terminal Adapters (MTAs) IPCablecom Multimedia Terminal Adapters (MTAs)
skipping to change at page 2, line 5 skipping to change at page 2, line 5
Copyright Notice Copyright Notice
Copyright (C) The Internet Society (2004). All Rights Reserved. Copyright (C) The Internet Society (2004). All Rights Reserved.
Abstract Abstract
This memo defines a portion of the Management Information Base (MIB) This memo defines a portion of the Management Information Base (MIB)
for use with network management protocols in the Internet community. for use with network management protocols in the Internet community.
In particular, it provides a common data and format representation In particular, it provides a common data and format representation
PacketCable/IPCablecom NCS Signaling MIB February 2004 PacketCable/IPCablecom NCS Signaling MIB July 2004
for PacketCable and IPCablecom compliant Multimedia Terminal Adapter for PacketCable and IPCablecom compliant Multimedia Terminal Adapter
devices. devices.
This memo specifies a MIB module in a manner that is compliant to This memo specifies a MIB module in a manner that is compliant to
the SNMP SMIv2. The set of objects are consistent with the SNMP the SNMP SMIv2. The set of objects are consistent with the SNMP
framework and existing SNMP standards. framework and existing SNMP standards.
Table of Contents Table of Contents
skipping to change at page 2, line 28 skipping to change at page 2, line 28
2.1 MTA.......................................................3 2.1 MTA.......................................................3
2.2 Endpoint..................................................3 2.2 Endpoint..................................................3
2.3 L Line Package............................................3 2.3 L Line Package............................................3
2.4 E Line Package............................................3 2.4 E Line Package............................................3
3. Overview......................................................3 3. Overview......................................................3
3.1 Structure of the MIB......................................4 3.1 Structure of the MIB......................................4
3.2 pktcSigDevConfigObjects...................................4 3.2 pktcSigDevConfigObjects...................................4
3.3 pktcSigNotification.......................................6 3.3 pktcSigNotification.......................................6
3.4 pktcSigConformance........................................6 3.4 pktcSigConformance........................................6
4. Definitions...................................................6 4. Definitions...................................................6
5. Acknowledgments..............................................48 5. Acknowledgments..............................................49
6. Normative References.........................................48 6. Normative References.........................................50
7. Informative References.......................................49 7. Informative References.......................................51
8. Security Considerations......................................50 8. Security Considerations......................................52
9. IANA Considerations..........................................52 9. IANA Considerations..........................................53
10. Intellectual Property.......................................52 10. Intellectual Property.......................................54
11. Authors' Addresses..........................................53 11. Authors' Addresses..........................................54
12. Full Copyright Statement....................................53 12. Full Copyright Statement....................................55
1. 1.
The Internet-Standard Management Framework The Internet-Standard Management Framework
For a detailed overview of the documents that describe the current For a detailed overview of the documents that describe the current
Internet-Standard Management Framework, please refer to section 7 of Internet-Standard Management Framework, please refer to section 7 of
RFC 3410 [RFC3410]. RFC 3410 [RFC3410].
Managed objects are accessed via a virtual information store, termed Managed objects are accessed via a virtual information store, termed
the Management Information Base or MIB. MIB objects are generally the Management Information Base or MIB. MIB objects are generally
skipping to change at page 3, line 5 skipping to change at page 3, line 5
module that is compliant to the SMIv2, which is described in STD 58, module that is compliant to the SMIv2, which is described in STD 58,
RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58, RFC 2580 RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58, RFC 2580
[RFC2580]. [RFC2580].
2. 2.
Terminology Terminology
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
PacketCable/IPCablecom NCS Signaling MIB February 2004 PacketCable/IPCablecom NCS Signaling MIB July 2004
"OPTIONAL", when used in the guidelines in this memo, are to be "OPTIONAL", when used in the guidelines in this memo, are to be
interpreted as described in RFC 2119 [RFC2119]. interpreted as described in RFC 2119 [RFC2119].
The terms "MIB module" and "information module" are used The terms "MIB module" and "information module" are used
interchangeably in this memo. As used here, both terms refer to any interchangeably in this memo. As used here, both terms refer to any
of the three types of information modules defined in Section 3 of of the three types of information modules defined in Section 3 of
RFC 2578 [RFC2578]. RFC 2578 [RFC2578].
2.1 2.1
skipping to change at page 4, line 5 skipping to change at page 4, line 5
3. 3.
Overview Overview
This MIB provides a set of objects required for Signaling This MIB provides a set of objects required for Signaling
PacketCable and IPCablecom compliant Multimedia Terminal Adapter PacketCable and IPCablecom compliant Multimedia Terminal Adapter
(MTA) devices. MTA devices include one or more endpoints (e.g., (MTA) devices. MTA devices include one or more endpoints (e.g.,
telephone ports) which receive signaling information to establish telephone ports) which receive signaling information to establish
ring cadence, and codecs used for providing telephony service. ring cadence, and codecs used for providing telephony service.
PacketCable/IPCablecom NCS Signaling MIB February 2004 PacketCable/IPCablecom NCS Signaling MIB July 2004
Telephone systems are typically very complex and often have a wide Telephone systems are typically very complex and often have a wide
distribution. It is therefore important for management systems to distribution. It is therefore important for management systems to
support MTAs from multiple vendors at the same time, including those support MTAs from multiple vendors at the same time, including those
from multiple countries. This MIB module provides objects suitable from multiple countries. This MIB module provides objects suitable
for managing signaling for MTA devices in the widest possible for managing signaling for MTA devices in the widest possible
variety of marketplaces. variety of marketplaces.
Several normative and informative references are used to help define Several normative and informative references are used to help define
NCS Signaling MIB objects. As a convention, in the object REFERENCE NCS Signaling MIB objects. As a convention, in the object REFERENCE
skipping to change at page 5, line 5 skipping to change at page 5, line 5
pktcSigDevR2Cadence - this object specifies ring cadence 2. pktcSigDevR2Cadence - this object specifies ring cadence 2.
pktcSigDevR3Cadence - this object specifies ring cadence 3. pktcSigDevR3Cadence - this object specifies ring cadence 3.
pktcSigDevR4Cadence - this object specifies ring cadence 4. pktcSigDevR4Cadence - this object specifies ring cadence 4.
pktcSigDevR5Cadence - this object specifies ring cadence 5. pktcSigDevR5Cadence - this object specifies ring cadence 5.
pktcSigDevR6Cadence - this object specifies ring cadence 6. pktcSigDevR6Cadence - this object specifies ring cadence 6.
PacketCable/IPCablecom NCS Signaling MIB February 2004 PacketCable/IPCablecom NCS Signaling MIB July 2004
pktcSigDevR7Cadence - this object specifies ring cadence 7. pktcSigDevR7Cadence - this object specifies ring cadence 7.
pktcSigDevRgCadence - this object specifies ring cadence rg. pktcSigDevRgCadence - this object specifies ring cadence rg.
pktcSigDevRsCadence - this object specifies ring cadence rs. pktcSigDevRsCadence - this object specifies ring cadence rs.
pktcSigDefCallSigDscp - this object specifies the default value used pktcSigDefCallSigDscp - this object specifies the default value used
in the IP header for setting the Differentiated Services Code Point in the IP header for setting the Differentiated Services Code Point
(DSCP) value for call signaling. (DSCP) value for call signaling.
skipping to change at page 6, line 5 skipping to change at page 6, line 5
pktcSigDevCIDRingAfterFSK - this international object sets the delay pktcSigDevCIDRingAfterFSK - this international object sets the delay
between the transmission of caller id information and the first between the transmission of caller id information and the first
ringing pattern. ringing pattern.
pktcSigDevCIDDTASAfterLR - this international object sets the delay pktcSigDevCIDDTASAfterLR - this international object sets the delay
between the end of a line reversal and the dual-tone alert signal. between the end of a line reversal and the dual-tone alert signal.
pktcSigDevVmwiMode - this object selects various modes of visual pktcSigDevVmwiMode - this object selects various modes of visual
message waiting indicator service in common use. message waiting indicator service in common use.
PacketCable/IPCablecom NCS Signaling MIB February 2004 PacketCable/IPCablecom NCS Signaling MIB July 2004
pktcSigDevVmwiFskAfterDTAS - this international object sets the pktcSigDevVmwiFskAfterDTAS - this international object sets the
delay between the dual-tone alert signal and the transmission of delay between the dual-tone alert signal and the transmission of
visual message waiting information. visual message waiting information.
pktcSigDevVwmiFskAfterRPAS - this international object sets the pktcSigDevVwmiFskAfterRPAS - this international object sets the
delay between the ring pulse alert signal and the transmission of delay between the ring pulse alert signal and the transmission of
visual message waiting information. visual message waiting information.
pktcSigDevVwmiDTASAfterLR - this international object sets the delay pktcSigDevVwmiDTASAfterLR - this international object sets the delay
skipping to change at page 7, line 5 skipping to change at page 7, line 5
establishing a set of objects designed to support operations over establishing a set of objects designed to support operations over
the widest range of marketplaces as is possible. the widest range of marketplaces as is possible.
4. 4.
Definitions Definitions
PKTC-IETF-SIG-MIB DEFINITIONS ::= BEGIN PKTC-IETF-SIG-MIB DEFINITIONS ::= BEGIN
IMPORTS IMPORTS
PacketCable/IPCablecom NCS Signaling MIB February 2004 PacketCable/IPCablecom NCS Signaling MIB July 2004
MODULE-IDENTITY, MODULE-IDENTITY,
OBJECT-TYPE, OBJECT-TYPE,
Integer32, Integer32,
Unsigned32, Unsigned32,
mib-2 mib-2
FROM SNMPv2-SMI FROM SNMPv2-SMI
InetAddressType, InetAddressType,
InetAddress, InetAddress,
InetPortNumber InetPortNumber
skipping to change at page 7, line 32 skipping to change at page 7, line 32
MODULE-COMPLIANCE MODULE-COMPLIANCE
FROM SNMPv2-CONF FROM SNMPv2-CONF
SnmpAdminString SnmpAdminString
FROM SNMP-FRAMEWORK-MIB FROM SNMP-FRAMEWORK-MIB
ifIndex ifIndex
FROM IF-MIB FROM IF-MIB
Dscp Dscp
FROM DIFFSERV-DSCP-TC; FROM DIFFSERV-DSCP-TC;
pktcSigMib MODULE-IDENTITY pktcSigMib MODULE-IDENTITY
LAST-UPDATED "200407010000Z" -- July 1, 2004 LAST-UPDATED "200407160000Z" -- July 16, 2004
ORGANIZATION "IETF IPCDN Working Group" ORGANIZATION "IETF IPCDN Working Group"
CONTACT-INFO CONTACT-INFO
"Satish Kumar Mudugere Eswaraiah "Satish Kumar Mudugere Eswaraiah
Texas Instruments India (P) Ltd., Texas Instruments India (P) Ltd.,
Golf view, Wind Tunnel Road Golf view, Wind Tunnel Road
Murugesh Palya Murugesh Palya
Bangalore - 560 017, INDIA Bangalore - 560 017, INDIA
Phone: +91 80 5269451 Phone: +91 80 5269451
Email: satish.kumar@ti.com Email: satish.kumar@ti.com
skipping to change at page 8, line 5 skipping to change at page 8, line 5
U.S.A. U.S.A.
Phone: +1 303 604 6595 Phone: +1 303 604 6595
Email: Sumanth@alopa.com Email: Sumanth@alopa.com
Gordon Beacham Gordon Beacham
Motorola BCS/DCG Motorola BCS/DCG
6450 Sequence Drive, Bldg. 1 6450 Sequence Drive, Bldg. 1
San Diego, CA 92121, USA San Diego, CA 92121, USA
Phone: +1 858-404-2335 Phone: +1 858-404-2335
PacketCable/IPCablecom NCS Signaling MIB February 2004 PacketCable/IPCablecom NCS Signaling MIB July 2004
E-Mail: gordon.beacham@motorola.com E-Mail: gordon.beacham@motorola.com
IETF IPCDN Working Group IETF IPCDN Working Group
General Discussion: ipcdn@ietf.org General Discussion: ipcdn@ietf.org
Subscribe: http://www.ietf.org/mailman/listinfo/ipcdn Subscribe: http://www.ietf.org/mailman/listinfo/ipcdn
Archive: ftp://ftp.ietf.org/ietf-mail-archive/ipcdn Archive: ftp://ftp.ietf.org/ietf-mail-archive/ipcdn
Co-Chair: Jean-Francois Mule, jf.mule@cablelabs.com Co-Chair: Jean-Francois Mule, jf.mule@cablelabs.com
Co-Chair: Richard Woundy, Richard_Woundy@cable.comcast.com" Co-Chair: Richard Woundy, Richard_Woundy@cable.comcast.com"
skipping to change at page 8, line 28 skipping to change at page 8, line 28
object for the PacketCable and IPCablecom Signaling object for the PacketCable and IPCablecom Signaling
protocols. This version of the MIB includes protocols. This version of the MIB includes
common signaling and Network Call Signaling common signaling and Network Call Signaling
(NCS) related signaling objects. (NCS) related signaling objects.
Copyright (C) The Internet Society (2004). This version of Copyright (C) The Internet Society (2004). This version of
this MIB module is part of RFC yyyy; see the RFC itself for this MIB module is part of RFC yyyy; see the RFC itself for
full legal notices." full legal notices."
-- RFC Ed: replace yyyy with actual RFC number and remove this note -- RFC Ed: replace yyyy with actual RFC number and remove this note
REVISION "200407010000Z" REVISION "200407160000Z"
DESCRIPTION DESCRIPTION
"Initial version, published as RFC yyyy." "Initial version, published as RFC yyyy."
-- RFC Ed: replace yyyy with actual RFC number and remove this note -- RFC Ed: replace yyyy with actual RFC number and remove this note
::= { mib-2 XXX } ::= { mib-2 XXX }
-- RFC Ed: replace XXX with IANA-assigned number and remove this -- RFC Ed: replace XXX with IANA-assigned number and remove this
-- note -- note
-- Textual Conventions -- Textual Conventions
skipping to change at page 9, line 5 skipping to change at page 9, line 5
SYNTAX Integer32 SYNTAX Integer32
PktcCodecType ::= TEXTUAL-CONVENTION PktcCodecType ::= TEXTUAL-CONVENTION
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" Textual Convention defines various types of CODECs that " Textual Convention defines various types of CODECs that
MAY be supported. The list of CODECs MUST be consistent MAY be supported. The list of CODECs MUST be consistent
with the Codec RTP MAP Parameters Table in the PacketCable with the Codec RTP MAP Parameters Table in the PacketCable
CODEC specification. In-line embedded comments below CODEC specification. In-line embedded comments below
PacketCable/IPCablecom NCS Signaling MIB February 2004 PacketCable/IPCablecom NCS Signaling MIB July 2004
contain the Literal Codec Name for each CODEC. The Literal contain the Literal Codec Name for each CODEC. The Literal
Codec Name is the second column of the table with CODEC Codec Name is the second column of the table with CODEC
RTP Map Parameters. Literal Codec Name Column contains the RTP Map Parameters. Literal Codec Name Column contains the
CODEC name used in LCD of the NCS messages CRCX/MDCX and CODEC name used in LCD of the NCS messages CRCX/MDCX and
is also used to identify the CODEC in the CMS is also used to identify the CODEC in the CMS
Provisioning Specification. RTP Map Parameter Column of Provisioning Specification. RTP Map Parameter Column of
the Table contains the string used in the media attribute the Table contains the string used in the media attribute
line (a=) of the SDP parameters in NCS messages." line (a=) of the SDP parameters in NCS messages."
SYNTAX INTEGER { SYNTAX INTEGER {
skipping to change at page 10, line 5 skipping to change at page 10, line 5
total cadence cycle. There will be at most 3 on/off total cadence cycle. There will be at most 3 on/off
transitions per cadence period." transitions per cadence period."
SYNTAX OCTET STRING (SIZE(4..36)) SYNTAX OCTET STRING (SIZE(4..36))
PktcSigType ::= TEXTUAL-CONVENTION PktcSigType ::= TEXTUAL-CONVENTION
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object lists the various types of signaling that may " This object lists the various types of signaling that may
be supported. be supported.
PacketCable/IPCablecom NCS Signaling MIB February 2004 PacketCable/IPCablecom NCS Signaling MIB July 2004
ncs - Network call signaling is a derivation of MGCP ncs - Network call signaling is a derivation of MGCP
(Media Gateway Control Protocol) defined for (Media Gateway Control Protocol) defined for
IPCablecom/PacketCable MTAs. " IPCablecom/PacketCable MTAs. "
SYNTAX INTEGER { SYNTAX INTEGER {
other(1), other(1),
reserved(2), -- reserved for future use reserved(2), -- reserved for future use
ncs(3) ncs(3)
} }
skipping to change at page 11, line 5 skipping to change at page 11, line 5
PCMA 1 PCMA 1
PCMU 2 PCMU 2
PCMU 3 PCMU 3
PCMA 1 PCMA 1
G729 1 G729 1
G729 2 G729 2
PacketCable/IPCablecom NCS Signaling MIB February 2004 PacketCable/IPCablecom NCS Signaling MIB July 2004
PCMU 1 PCMU 1
G729 1 G729 1
Based on this example, the entries in the codec table Based on this example, the entries in the codec table
would be: would be:
CodecComboIndex pktcSigDevCodecType pktcSigDevCodecMax CodecComboIndex pktcSigDevCodecType pktcSigDevCodecMax
1 pcma 3 1 pcma 3
2 pcma 2 2 pcma 2
skipping to change at page 11, line 41 skipping to change at page 11, line 41
pktcSigDevCodecEntry OBJECT-TYPE pktcSigDevCodecEntry OBJECT-TYPE
SYNTAX PktcSigDevCodecEntry SYNTAX PktcSigDevCodecEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Each entry represents the maximum number of active "Each entry represents the maximum number of active
connections with a particular codec the MTA is capable of connections with a particular codec the MTA is capable of
supporting. Each row is indexed by a composite key supporting. Each row is indexed by a composite key
consisting of a number enumerating the particular codec consisting of a number enumerating the particular codec
combination and the codec type." combination and the codec type."
INDEX { pktcSigDevCodecComboIndex, pktcSigDevCodeType } INDEX { pktcSigDevCodecComboIndex, pktcSigDevCodecType }
::= { pktcSigDevCodecTable 1 } ::= { pktcSigDevCodecTable 1 }
PktcSigDevCodecEntry ::= SEQUENCE { PktcSigDevCodecEntry ::= SEQUENCE {
pktcSigDevCodecComboIndex Unsigned32, pktcSigDevCodecComboIndex Unsigned32,
pktcSigDevCodecType PktcCodecType, pktcSigDevCodecType PktcCodecType,
pktcSigDevCodecMax Unsigned32 pktcSigDevCodecMax Unsigned32
} }
pktcSigDevCodecComboIndex OBJECT-TYPE pktcSigDevCodecComboIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..255) SYNTAX Unsigned32 (1..255)
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
PacketCable/IPCablecom NCS Signaling MIB February 2004 PacketCable/IPCablecom NCS Signaling MIB July 2004
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" The index value which enumerates a particular codec " The index value which enumerates a particular codec
combination in the pktcSigDevCodecTable." combination in the pktcSigDevCodecTable."
::= { pktcSigDevCodecEntry 1 } ::= { pktcSigDevCodecEntry 1 }
pktcSigDevCodecType OBJECT-TYPE pktcSigDevCodecType OBJECT-TYPE
SYNTAX PktcCodecType SYNTAX PktcCodecType
MAX-ACCESS read-only MAX-ACCESS read-only
skipping to change at page 13, line 5 skipping to change at page 13, line 5
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object specifies if the device is capable of " This object specifies if the device is capable of
silence suppression (Voice Activity Detection)." silence suppression (Voice Activity Detection)."
::= { pktcSigDevConfigObjects 3 } ::= { pktcSigDevConfigObjects 3 }
pktcSigDevCallerIdSigProtocol OBJECT-TYPE pktcSigDevCallerIdSigProtocol OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
PacketCable/IPCablecom NCS Signaling MIB February 2004 PacketCable/IPCablecom NCS Signaling MIB July 2004
fsk (1), fsk (1),
dtmf (2) dtmf (2)
} }
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object identifies the subscriber line protocol used "This object identifies the subscriber line protocol used
for signaling on-hook caller id information." for signaling on-hook caller id information."
REFERENCE REFERENCE
skipping to change at page 14, line 5 skipping to change at page 14, line 5
pktcSigDevR3Cadence OBJECT-TYPE pktcSigDevR3Cadence OBJECT-TYPE
SYNTAX PktcRingCadence SYNTAX PktcRingCadence
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object specifies ring cadence 3 (a user defined " This object specifies ring cadence 3 (a user defined
field). This object is required for the L line package." field). This object is required for the L line package."
::= { pktcSigDevConfigObjects 8 } ::= { pktcSigDevConfigObjects 8 }
PacketCable/IPCablecom NCS Signaling MIB February 2004 PacketCable/IPCablecom NCS Signaling MIB July 2004
pktcSigDevR4Cadence OBJECT-TYPE pktcSigDevR4Cadence OBJECT-TYPE
SYNTAX PktcRingCadence SYNTAX PktcRingCadence
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object specifies ring cadence 4 (a user defined " This object specifies ring cadence 4 (a user defined
field). This object is required for the L line package." field). This object is required for the L line package."
::= { pktcSigDevConfigObjects 9 } ::= { pktcSigDevConfigObjects 9 }
skipping to change at page 15, line 5 skipping to change at page 15, line 5
DESCRIPTION DESCRIPTION
" This object specifies ring cadence rg (a user defined " This object specifies ring cadence rg (a user defined
field). This object is required for the L line package." field). This object is required for the L line package."
::= { pktcSigDevConfigObjects 13 } ::= { pktcSigDevConfigObjects 13 }
pktcSigDevRsCadence OBJECT-TYPE pktcSigDevRsCadence OBJECT-TYPE
SYNTAX PktcRingCadence SYNTAX PktcRingCadence
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
PacketCable/IPCablecom NCS Signaling MIB February 2004 PacketCable/IPCablecom NCS Signaling MIB July 2004
DESCRIPTION DESCRIPTION
" This object specifies ring cadence rs (a user defined " This object specifies ring cadence rs (a user defined
field) The MTA MUST reject any attempt to make this object field) The MTA MUST reject any attempt to make this object
repeatable. This object is required for the L line repeatable. This object is required for the L line
package." package."
::= { pktcSigDevConfigObjects 14 } ::= { pktcSigDevConfigObjects 14 }
pktcSigDefCallSigDscp OBJECT-TYPE pktcSigDefCallSigDscp OBJECT-TYPE
SYNTAX Dscp -- RFC 3289: DIFFSERV-DSCP-TC SYNTAX Dscp -- RFC 3289: DIFFSERV-DSCP-TC
skipping to change at page 15, line 30 skipping to change at page 15, line 30
Differentiated Services Code Point (DSCP) value for call Differentiated Services Code Point (DSCP) value for call
signaling." signaling."
DEFVAL { 0 } DEFVAL { 0 }
::= { pktcSigDevConfigObjects 15 } ::= { pktcSigDevConfigObjects 15 }
pktcSigDefMediaStreamDscp OBJECT-TYPE pktcSigDefMediaStreamDscp OBJECT-TYPE
SYNTAX Dscp -- RFC 3289: DIFFSERV-DSCP-TC SYNTAX Dscp -- RFC 3289: DIFFSERV-DSCP-TC
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" The default value used in the IP header for setting " This object contains the default value used in the IP
the Differentiated Services Code Point (DSCP) value for header for setting the Differentiated Services Code Point
media stream packets." (DSCP) value for media stream packets. The MTA MUST NOT
update this object with the value supplied by the CMS in
the NCS messages (if present). When the value of this
object is updated by SNMP, the MTA MUST use the new value
as a default starting only from the new connection.
Existing connections are not affected by the value's
update."
DEFVAL { 0 } DEFVAL { 0 }
::= { pktcSigDevConfigObjects 16 } ::= { pktcSigDevConfigObjects 16 }
-- --
-- pktcSigCapabilityTable - This table defines the valid signaling -- pktcSigCapabilityTable - This table defines the valid signaling
-- types supported by this MTA. -- types supported by this MTA.
-- --
pktcSigCapabilityTable OBJECT-TYPE pktcSigCapabilityTable OBJECT-TYPE
SYNTAX SEQUENCE OF PktcSigCapabilityEntry SYNTAX SEQUENCE OF PktcSigCapabilityEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This table describes the signaling types supported by this " This table describes the signaling types supported by this
MTA." MTA."
::= { pktcSigDevConfigObjects 17 } ::= { pktcSigDevConfigObjects 17 }
PacketCable/IPCablecom NCS Signaling MIB July 2004
pktcSigCapabilityEntry OBJECT-TYPE pktcSigCapabilityEntry OBJECT-TYPE
SYNTAX PktcSigCapabilityEntry SYNTAX PktcSigCapabilityEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" Entries in pktcMtaDevSigCapabilityTable - List of " Entries in pktcMtaDevSigCapabilityTable - List of
PacketCable/IPCablecom NCS Signaling MIB February 2004
supported signaling types, versions and vendor extensions supported signaling types, versions and vendor extensions
for this MTA. Each entry in the list provides for one for this MTA. Each entry in the list provides for one
signaling type and version combination. If the device signaling type and version combination. If the device
supports multiple versions of the same signaling type it supports multiple versions of the same signaling type it
will require multiple entries." will require multiple entries."
INDEX { pktcSignalingIndex } INDEX { pktcSignalingIndex }
::= { pktcSigCapabilityTable 1 } ::= { pktcSigCapabilityTable 1 }
PktcSigCapabilityEntry ::= SEQUENCE { PktcSigCapabilityEntry ::= SEQUENCE {
pktcSignalingIndex Unsigned32, pktcSignalingIndex Unsigned32,
skipping to change at page 16, line 50 skipping to change at page 17, line 5
pktcSignalingVersion OBJECT-TYPE pktcSignalingVersion OBJECT-TYPE
SYNTAX SnmpAdminString SYNTAX SnmpAdminString
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" Provides the version of the signaling type - reference " Provides the version of the signaling type - reference
pktcSignalingType. Examples would be 1.0 or 2.33 etc." pktcSignalingType. Examples would be 1.0 or 2.33 etc."
::= { pktcSigCapabilityEntry 3 } ::= { pktcSigCapabilityEntry 3 }
PacketCable/IPCablecom NCS Signaling MIB July 2004
pktcSignalingVendorExtension OBJECT-TYPE pktcSignalingVendorExtension OBJECT-TYPE
SYNTAX SnmpAdminString SYNTAX SnmpAdminString
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" The vendor extension allows vendors to provide a list of " The vendor extension allows vendors to provide a list of
PacketCable/IPCablecom NCS Signaling MIB February 2004
additional capabilities, vendors can decide how to encode additional capabilities, vendors can decide how to encode
these extensions, although space separated text is these extensions, although space separated text is
suggested." suggested."
::= { pktcSigCapabilityEntry 4 } ::= { pktcSigCapabilityEntry 4 }
pktcSigDefNcsReceiveUdpPort OBJECT-TYPE pktcSigDefNcsReceiveUdpPort OBJECT-TYPE
SYNTAX InetPortNumber (1025..65535) SYNTAX InetPortNumber (1025..65535)
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
skipping to change at page 17, line 50 skipping to change at page 18, line 4
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object must only be set via the configuration file " This object must only be set via the configuration file
during the provisioning process. The power ring frequency during the provisioning process. The power ring frequency
is the frequency at which the sinusoidal voltage must is the frequency at which the sinusoidal voltage must
travel down the twisted pair to make terminal equipment travel down the twisted pair to make terminal equipment
ring. Different countries define different electrical ring. Different countries define different electrical
characteristics to make terminal equipment ring." characteristics to make terminal equipment ring."
REFERENCE REFERENCE
"EN 300 001 contains a list of frequency ranges that "EN 300 001 contains a list of frequency ranges that
PacketCable/IPCablecom NCS Signaling MIB July 2004
are defined for each country." are defined for each country."
DEFVAL { f20Hz } DEFVAL { f20Hz }
::= { pktcSigDevConfigObjects 19 } ::= { pktcSigDevConfigObjects 19 }
pktcSigPulseSignalTable OBJECT-TYPE pktcSigPulseSignalTable OBJECT-TYPE
SYNTAX SEQUENCE OF PktcSigPulseSignalEntry SYNTAX SEQUENCE OF PktcSigPulseSignalEntry
PacketCable/IPCablecom NCS Signaling MIB February 2004
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" The Pulse signal table defines the pulse signal operation. " The Pulse signal table defines the pulse signal operation.
There are nine types of international pulse signals, There are nine types of international pulse signals,
with each signal having a set of provisionable parameters. with each signal having a set of provisionable parameters.
The values of the MIB objects in this table take effect The values of the MIB objects in this table take effect
only if these parameters are not defined via signaling, in only if these parameters are not defined via signaling, in
which case the latter determines the values of the which case the latter determines the values of the
parameters. This object is required for the E line parameters. This object is required for the E line
skipping to change at page 18, line 33 skipping to change at page 18, line 39
pktcSigPulseSignalEntry OBJECT-TYPE pktcSigPulseSignalEntry OBJECT-TYPE
SYNTAX PktcSigPulseSignalEntry SYNTAX PktcSigPulseSignalEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object defines the set of parameters associated with " This object defines the set of parameters associated with
each particular value of pktcSigPulseSignalType. Each each particular value of pktcSigPulseSignalType. Each
entry in the pktcSigPulseSignalTable is indexed by the entry in the pktcSigPulseSignalTable is indexed by the
pktcSigPulseSignalType object." pktcSigPulseSignalType object."
INDEX { pktcSigPulseSignalIndex } INDEX { pktcSigPulseSignalType }
::= { pktcSigPulseSignalTable 1 } ::= { pktcSigPulseSignalTable 1 }
PktcSigPulseSignalEntry ::= SEQUENCE { PktcSigPulseSignalEntry ::= SEQUENCE {
pktcSigPulseSignalType INTEGER, pktcSigPulseSignalType INTEGER,
pktcSigPulseSignalFrequency INTEGER, pktcSigPulseSignalFrequency INTEGER,
pktcSigPulseSignalDbLevel TenthdBm, pktcSigPulseSignalDbLevel TenthdBm,
pktcSigPulseSignalDuration Unsigned32, pktcSigPulseSignalDuration Unsigned32,
pktcSigPulseSignalPulseInterval Unsigned32, pktcSigPulseSignalPulseInterval Unsigned32,
pktcSigPulseSignalRepeatCount Unsigned32 pktcSigPulseSignalRepeatCount Unsigned32
} }
pktcSigPulseSignalType OBJECT-TYPE pktcSigPulseSignalType OBJECT-TYPE
SYNTAX INTEGER SYNTAX INTEGER
{ {
initialRing(1), initialRing(1),
pulseLoopClose(2), pulseLoopClose(2),
PacketCable/IPCablecom NCS Signaling MIB July 2004
pulseLoopOpen(3), pulseLoopOpen(3),
enableMeterPulse(4), enableMeterPulse(4),
meterPulseBurst(5), meterPulseBurst(5),
pulseNoBattery(6), pulseNoBattery(6),
pulseNormalPolarity(7), pulseNormalPolarity(7),
pulseReducedBattery(8), pulseReducedBattery(8),
PacketCable/IPCablecom NCS Signaling MIB February 2004
pulseReversePolarity(9) pulseReversePolarity(9)
} }
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" There are nine types of international pulse signals." " There are nine types of international pulse signals."
REFERENCE REFERENCE
"EN 300 324-1 Specification" "EN 300 324-1 Specification"
::= { pktcSigPulseSignalEntry 1 } ::= { pktcSigPulseSignalEntry 1 }
skipping to change at page 19, line 46 skipping to change at page 19, line 52
meterPulseBurst 16000 meterPulseBurst 16000
The value of twentyfive must only be used for the The value of twentyfive must only be used for the
initialRing signal type. The values of twelvethousand and initialRing signal type. The values of twelvethousand and
sixteenthousand must only be used for enableMeterPulse and sixteenthousand must only be used for enableMeterPulse and
meterPulseBurst signal types." meterPulseBurst signal types."
REFERENCE REFERENCE
"EN 300 001 Specification" "EN 300 001 Specification"
::= { pktcSigPulseSignalEntry 2} ::= { pktcSigPulseSignalEntry 2}
pktcSigPulseSignalDbLevel OBJECT-TYPE pktcSigPulseSignalDbLevel OBJECT-TYPE
SYNTAX TenthdBm (-250..152) SYNTAX TenthdBm (-350..0)
UNITS "dbm" UNITS "dbm"
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
PacketCable/IPCablecom NCS Signaling MIB July 2004
DESCRIPTION DESCRIPTION
" This object is only applicable to the enableMeterPulse and " This object is only applicable to the enableMeterPulse and
meterPulseBurst signal types. This is the decibel level meterPulseBurst signal types. This is the decibel level
for each frequency at which tones could be generated at for each frequency at which tones could be generated at
the a and b terminals (TE connection point)." the a and b terminals (TE connection point)."
REFERENCE REFERENCE
PacketCable/IPCablecom NCS Signaling MIB February 2004
"EN 300 001 Specification" "EN 300 001 Specification"
DEFVAL { -135 } DEFVAL { -135 }
::={pktcSigPulseSignalEntry 3 } ::={pktcSigPulseSignalEntry 3 }
pktcSigPulseSignalDuration OBJECT-TYPE pktcSigPulseSignalDuration OBJECT-TYPE
SYNTAX Unsigned32 (0..5000) SYNTAX Unsigned32 (0..5000)
UNITS "Milliseconds" UNITS "Milliseconds"
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
skipping to change at page 20, line 50 skipping to change at page 21, line 4
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object specifies the repeat interval, or the period " This object specifies the repeat interval, or the period
for each signal type. In addition, the MTA must accept for each signal type. In addition, the MTA must accept
the values in the incremental steps specific for each the values in the incremental steps specific for each
signal type. The following table defines the default signal type. The following table defines the default
values and the incremental steps for this object depending values and the incremental steps for this object depending
on the signal type. on the signal type.
pktcSigPulseSignaltype Default (ms) Increment (ms) pktcSigPulseSignaltype Default (ms) Increment (ms)
PacketCable/IPCablecom NCS Signaling MIB July 2004
initialRing 200 50 initialRing 200 50
pulseLoopClose 1000 10 pulseLoopClose 1000 10
pulseLoopOpen 1000 10 pulseLoopOpen 1000 10
enableMeterPulse 1000 10 enableMeterPulse 1000 10
meterPulseBurst 1000 10 meterPulseBurst 1000 10
pulseNoBattery 1000 10 pulseNoBattery 1000 10
PacketCable/IPCablecom NCS Signaling MIB February 2004
pulseNormalPolarity 1000 10 pulseNormalPolarity 1000 10
pulseReducedBattery 1000 10 pulseReducedBattery 1000 10
pulseReversePolarity 1000 10" pulseReversePolarity 1000 10"
REFERENCE REFERENCE
"EN 300 324-1 Specification" "EN 300 324-1 Specification"
::= { pktcSigPulseSignalEntry 5} ::= { pktcSigPulseSignalEntry 5}
pktcSigPulseSignalRepeatCount OBJECT-TYPE pktcSigPulseSignalRepeatCount OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
MAX-ACCESS read-write MAX-ACCESS read-write
skipping to change at page 21, line 50 skipping to change at page 22, line 4
rpAsETS(3), rpAsETS(3),
lrAsETS(4) lrAsETS(4)
} }
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object is used for international systems only. " This object is used for international systems only.
For on-hook Caller ID, pktcSigDevCIDMode selects the For on-hook Caller ID, pktcSigDevCIDMode selects the
method of Caller ID. For the duringRingingETS method, the method of Caller ID. For the duringRingingETS method, the
FSK containing the Caller ID information is sent between FSK containing the Caller ID information is sent between
PacketCable/IPCablecom NCS Signaling MIB July 2004
the first and second ring pattern. For the dtAsETS, the first and second ring pattern. For the dtAsETS,
rpAsETS, and lrAsETS methods, the FSK containing the rpAsETS, and lrAsETS methods, the FSK containing the
Caller ID information is sent before the first ring Caller ID information is sent before the first ring
pattern. For the dtAsETS method, the FSK is sent after the pattern. For the dtAsETS method, the FSK is sent after the
Dual Tone Alert Signal. Dual Tone Alert Signal.
For the rpAsETS method, the FSK is sent after a Ring For the rpAsETS method, the FSK is sent after a Ring
PacketCable/IPCablecom NCS Signaling MIB February 2004
Pulse. For the lrAsETS method, the Line Reversal occurs Pulse. For the lrAsETS method, the Line Reversal occurs
first, then the Dual Tone Alert Signal, and finally the first, then the Dual Tone Alert Signal, and finally the
FSK is sent." FSK is sent."
DEFVAL { dtAsETS } DEFVAL { dtAsETS }
::= {pktcSigDevConfigObjects 21 } ::= {pktcSigDevConfigObjects 21 }
pktcSigDevCIDFskAfterRing OBJECT-TYPE pktcSigDevCIDFskAfterRing OBJECT-TYPE
SYNTAX Unsigned32 (50..2000) SYNTAX Unsigned32 (50..2000)
UNITS "Milliseconds" UNITS "Milliseconds"
MAX-ACCESS read-write MAX-ACCESS read-write
skipping to change at page 22, line 50 skipping to change at page 23, line 4
" This object is used for international systems only. This " This object is used for international systems only. This
object specifies the delay between the end of the Dual object specifies the delay between the end of the Dual
Tone Alert Signal (DT-AS) and the start of the Tone Alert Signal (DT-AS) and the start of the
transmission of the FSK containing the Caller ID transmission of the FSK containing the Caller ID
information. This object is only used when information. This object is only used when
pktcSigDevCIDMode is dtAsETS or lrAsETS. pktcSigDevCIDMode is dtAsETS or lrAsETS.
pktcSigDevCIDMode pktcSigDevCIDFskAfterDTAS pktcSigDevCIDMode pktcSigDevCIDFskAfterDTAS
duringringingETS not used duringringingETS not used
dtAsETS 50 ms dtAsETS 50 ms
rpAsETS not used rpAsETS not used
PacketCable/IPCablecom NCS Signaling MIB July 2004
lrAsETS 50 ms" lrAsETS 50 ms"
REFERENCE REFERENCE
"EN 300 659-1 Specification" "EN 300 659-1 Specification"
DEFVAL { 50 } DEFVAL { 50 }
::= {pktcSigDevConfigObjects 23 } ::= {pktcSigDevConfigObjects 23 }
PacketCable/IPCablecom NCS Signaling MIB February 2004
pktcSigDevCIDFskAfterRPAS OBJECT-TYPE pktcSigDevCIDFskAfterRPAS OBJECT-TYPE
SYNTAX Unsigned32 (500..800) SYNTAX Unsigned32 (500..800)
UNITS "Milliseconds" UNITS "Milliseconds"
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object is used for international systems only. This " This object is used for international systems only. This
object specifies the delay between the end of the Ring object specifies the delay between the end of the Ring
Pulse Alert Signal (RP-AS) and the start of the Pulse Alert Signal (RP-AS) and the start of the
transmission of the FSK containing the Caller ID transmission of the FSK containing the Caller ID
skipping to change at page 23, line 51 skipping to change at page 24, line 5
pktcSigDevCIDMode pktcSigDevCIDFskAfterFSK pktcSigDevCIDMode pktcSigDevCIDFskAfterFSK
duringringingETS not used duringringingETS not used
dtAsETS 250 ms dtAsETS 250 ms
rpAsETS 250 ms rpAsETS 250 ms
lrAsETS 250 ms" lrAsETS 250 ms"
REFERENCE REFERENCE
"EN 300 659-1 Specification" "EN 300 659-1 Specification"
DEFVAL { 250 } DEFVAL { 250 }
::= {pktcSigDevConfigObjects 25 } ::= {pktcSigDevConfigObjects 25 }
PacketCable/IPCablecom NCS Signaling MIB July 2004
pktcSigDevCIDDTASAfterLR OBJECT-TYPE pktcSigDevCIDDTASAfterLR OBJECT-TYPE
SYNTAX Unsigned32 (50..655) SYNTAX Unsigned32 (50..655)
UNITS "Milliseconds" UNITS "Milliseconds"
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
PacketCable/IPCablecom NCS Signaling MIB February 2004
DESCRIPTION DESCRIPTION
" This object is used for international systems only. This " This object is used for international systems only. This
object specifies the delay between the end of the Line object specifies the delay between the end of the Line
Reversal and the start of the Dual Tone Alert Signal Reversal and the start of the Dual Tone Alert Signal
(DT-AS). This object is only used when pktcSigDevCIDMode (DT-AS). This object is only used when pktcSigDevCIDMode
is lrAsETS. is lrAsETS.
pktcSigDevCIDMode pktcSigDevCIDFskAfterLR pktcSigDevCIDMode pktcSigDevCIDFskAfterLR
duringringingETS not used duringringingETS not used
dtAsETS not used dtAsETS not used
rpAsETS not used rpAsETS not used
skipping to change at page 24, line 50 skipping to change at page 25, line 4
the FSK is sent after a Ring Pulse. For the lrAsETS the FSK is sent after a Ring Pulse. For the lrAsETS
method, the Line Reversal occurs first, then the Dual Tone method, the Line Reversal occurs first, then the Dual Tone
Alert Signal, and finally the FSK is sent. For the OSI Alert Signal, and finally the FSK is sent. For the OSI
method, the FSK is sent after the Open Switching method, the FSK is sent after the Open Switching
Interval." Interval."
DEFVAL { dtAsETS } DEFVAL { dtAsETS }
::= {pktcSigDevConfigObjects 27 } ::= {pktcSigDevConfigObjects 27 }
pktcSigDevVmwiFskAfterDTAS OBJECT-TYPE pktcSigDevVmwiFskAfterDTAS OBJECT-TYPE
SYNTAX Unsigned32 (45..500) SYNTAX Unsigned32 (45..500)
PacketCable/IPCablecom NCS Signaling MIB July 2004
UNITS "Milliseconds" UNITS "Milliseconds"
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object is used for international systems only. This " This object is used for international systems only. This
object specifies the delay between the end of the Dual object specifies the delay between the end of the Dual
PacketCable/IPCablecom NCS Signaling MIB February 2004
Tone Alert Signal (DT-AS) and the start of the Tone Alert Signal (DT-AS) and the start of the
transmission of the FSK containing the VMWI information. transmission of the FSK containing the VMWI information.
This object is only used when pktcSigDevVmwiMode is This object is only used when pktcSigDevVmwiMode is
dtAsETS or lrAsETS. dtAsETS or lrAsETS.
pktcSigDevVmwiMode pktcSigDevVmwiFskAfterDTAS pktcSigDevVmwiMode pktcSigDevVmwiFskAfterDTAS
dtAsETS 50 ms dtAsETS 50 ms
rpAsETS not used rpAsETS not used
lrAsETS 50 ms" lrAsETS 50 ms"
REFERENCE REFERENCE
"EN 300 659-1 Specification" "EN 300 659-1 Specification"
skipping to change at page 25, line 49 skipping to change at page 26, line 4
::= {pktcSigDevConfigObjects 29 } ::= {pktcSigDevConfigObjects 29 }
pktcSigDevVmwiDTASAfterLR OBJECT-TYPE pktcSigDevVmwiDTASAfterLR OBJECT-TYPE
SYNTAX Unsigned32 (50..655) SYNTAX Unsigned32 (50..655)
UNITS "Milliseconds" UNITS "Milliseconds"
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object is used for international systems only. This " This object is used for international systems only. This
object specifies the delay between the end of the Line object specifies the delay between the end of the Line
PacketCable/IPCablecom NCS Signaling MIB July 2004
Reversal and the start of the Dual Tone Alert Signal Reversal and the start of the Dual Tone Alert Signal
(DT-AS) for VMWI information. This object is only used (DT-AS) for VMWI information. This object is only used
when pktcSigDevVmwiMode is lrAsETS. when pktcSigDevVmwiMode is lrAsETS.
pktcSigDevVmwiMode pktcSigDevVmwiDTASAfterLR pktcSigDevVmwiMode pktcSigDevVmwiDTASAfterLR
dtAsETS not used dtAsETS not used
rpAsETS not used rpAsETS not used
PacketCable/IPCablecom NCS Signaling MIB February 2004
lrAsETS 250 ms " lrAsETS 250 ms "
REFERENCE REFERENCE
"EN 300 659-1 Specification" "EN 300 659-1 Specification"
DEFVAL { 250 } DEFVAL { 250 }
::= {pktcSigDevConfigObjects 30 } ::= {pktcSigDevConfigObjects 30 }
pktcSigDevRingCadenceTable OBJECT-TYPE pktcSigDevRingCadenceTable OBJECT-TYPE
SYNTAX SEQUENCE OF PktcSigDevRingCadenceEntry SYNTAX SEQUENCE OF PktcSigDevRingCadenceEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
skipping to change at page 26, line 50 skipping to change at page 27, line 4
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" Unique value ranging from 1 to 128 that corresponds to the " Unique value ranging from 1 to 128 that corresponds to the
value sent by the LE (plus one) based on country specific value sent by the LE (plus one) based on country specific
cadences, one row per cadence cycle. In any given system cadences, one row per cadence cycle. In any given system
implementation for a particular country, it is anticipated implementation for a particular country, it is anticipated
that a small number of ring cadences will be in use. Thus, that a small number of ring cadences will be in use. Thus,
this table most likely will not be populated to its full this table most likely will not be populated to its full
128-row size." 128-row size."
PacketCable/IPCablecom NCS Signaling MIB July 2004
INDEX { pktcSigDevRingCadenceIndex } INDEX { pktcSigDevRingCadenceIndex }
::= { pktcSigDevRingCadenceTable 1 } ::= { pktcSigDevRingCadenceTable 1 }
PktcSigDevRingCadenceEntry ::= SEQUENCE { PktcSigDevRingCadenceEntry ::= SEQUENCE {
pktcSigDevRingCadenceIndex Unsigned32, pktcSigDevRingCadenceIndex Unsigned32,
pktcSigDevRingCadence OCTET STRING pktcSigDevRingCadence PktcRingCadence
PacketCable/IPCablecom NCS Signaling MIB February 2004
} }
pktcSigDevRingCadenceIndex OBJECT-TYPE pktcSigDevRingCadenceIndex OBJECT-TYPE
SYNTAX Unsigned32 (1..128) SYNTAX Unsigned32 (1..128)
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" The table index equivalent to the country specific cadence " The table index equivalent to the country specific cadence
(1 - 128)." (1 - 128)."
::= { pktcSigDevRingCadenceEntry 1 } ::= { pktcSigDevRingCadenceEntry 1 }
skipping to change at page 27, line 49 skipping to change at page 28, line 4
make sure that, after the provisioning cycle, the table is make sure that, after the provisioning cycle, the table is
fully populated (i.e., for each possible index, an entry fully populated (i.e., for each possible index, an entry
MUST be defined) using reasonable defaults for each row MUST be defined) using reasonable defaults for each row
that was not defined by the provisioning information. that was not defined by the provisioning information.
Objects in this table do not persist across MTA reboots." Objects in this table do not persist across MTA reboots."
REFERENCE REFERENCE
"NCS Specification, TS 101 909-4 Specification" "NCS Specification, TS 101 909-4 Specification"
::= { pktcSigDevConfigObjects 32 } ::= { pktcSigDevConfigObjects 32 }
pktcSigDevToneEntry OBJECT-TYPE pktcSigDevToneEntry OBJECT-TYPE
PacketCable/IPCablecom NCS Signaling MIB July 2004
SYNTAX PktcSigDevToneEntry SYNTAX PktcSigDevToneEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" Unique value ranging from 1 to 21 that will correspond to " Unique value ranging from 1 to 21 that will correspond to
the different tone types that are being supported by the the different tone types that are being supported by the
PacketCable/IPCablecom NCS Signaling MIB February 2004
device. These tones can be provisioned based on country device. These tones can be provisioned based on country
specific needs." specific needs."
INDEX { pktcSigDevToneType } INDEX { pktcSigDevToneType }
::= { pktcSigDevToneTable 1 } ::= { pktcSigDevToneTable 1 }
PktcSigDevToneEntry ::= SEQUENCE { PktcSigDevToneEntry ::= SEQUENCE {
pktcSigDevToneType INTEGER, pktcSigDevToneType INTEGER,
pktcSigDevToneDbLevel TenthdBm, pktcSigDevToneDbLevel TenthdBm,
pktcSigDevToneFreqType INTEGER, pktcSigDevToneFreqType INTEGER,
pktcSigDevToneNumFrequencies Unsigned32, pktcSigDevToneNumFrequencies Unsigned32,
skipping to change at page 28, line 50 skipping to change at page 29, line 4
offHookWarning(5), offHookWarning(5),
ringBack(6), ringBack(6),
reOrder(7), reOrder(7),
stutterdial(8), stutterdial(8),
callWaiting1(9), callWaiting1(9),
callWaiting2(10), callWaiting2(10),
callWaiting3(11), callWaiting3(11),
callWaiting4(12), callWaiting4(12),
alertingSignal(13), alertingSignal(13),
specialDial(14), specialDial(14),
PacketCable/IPCablecom NCS Signaling MIB July 2004
specialInfo(15), specialInfo(15),
release(16), release(16),
congestion(17), congestion(17),
userDefined1(18), userDefined1(18),
userDefined2(19), userDefined2(19),
userDefined3(20), userDefined3(20),
PacketCable/IPCablecom NCS Signaling MIB February 2004
userDefined4(21) userDefined4(21)
} }
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object defines the type of tone being accessed. The " This object defines the type of tone being accessed. The
alertingSignal, specialDial, specialInfo, release, alertingSignal, specialDial, specialInfo, release,
congestion and userDefined1-4 tone types are triggered congestion and userDefined1-4 tone types are triggered
using the E line package." using the E line package."
::={pktcSigDevToneEntry 1 } ::={pktcSigDevToneEntry 1 }
skipping to change at page 29, line 50 skipping to change at page 30, line 4
" This object describes how the frequencies are applied. " This object describes how the frequencies are applied.
allFrequencies indicates all frequences specifed by allFrequencies indicates all frequences specifed by
pktcSigDevToneNumFrequencies are mixed to form a single pktcSigDevToneNumFrequencies are mixed to form a single
tone. The tone is then applied in sequence using the tone. The tone is then applied in sequence using the
number of on/off times specified in number of on/off times specified in
pktcSigDevToneNumOnOffTimes. SingleFrequecySequence pktcSigDevToneNumOnOffTimes. SingleFrequecySequence
indicates all frequencies specified by indicates all frequencies specified by
pktcSigDevToneNumFrequencies are applied in sequence pktcSigDevToneNumFrequencies are applied in sequence
using the corresponding frequency number on/off time using the corresponding frequency number on/off time
(e.g., pktcSigDevToneFirstFrequency uses (e.g., pktcSigDevToneFirstFrequency uses
PacketCable/IPCablecom NCS Signaling MIB July 2004
pktcSigDevToneFirstToneOn and pktcSigDevToneFirstToneOff, pktcSigDevToneFirstToneOn and pktcSigDevToneFirstToneOff,
pktcSigDevToneSecondFrequency uses pktcSigDevToneSecondFrequency uses
pktcSigDevToneSecondToneOn and pktcSigDevToneSecondToneOn and
pktcSigDevToneSecondToneOff). For this tone type pktcSigDevToneSecondToneOff). For this tone type
pktcSigDevToneNumFrequencies MUST equal pktcSigDevToneNumFrequencies MUST equal
pktcSigDevToneNumOnOffTimes. DualFrequencySequence pktcSigDevToneNumOnOffTimes. DualFrequencySequence
PacketCable/IPCablecom NCS Signaling MIB February 2004
indicates two pairs of frequencies are added to form two indicates two pairs of frequencies are added to form two
sequenced tones. The first and second frequency are added sequenced tones. The first and second frequency are added
to form tone one and are applied using to form tone one and are applied using
pktcSigDevToneFirstToneOn and pktcSigDevToneFirstToneOff. pktcSigDevToneFirstToneOn and pktcSigDevToneFirstToneOff.
The third and forth frequency are added to form tone two The third and forth frequency are added to form tone two
and are applied using pktcSigDevToneSecondToneOn and and are applied using pktcSigDevToneSecondToneOn and
pktcSigDevToneSecondToneOff. For this tone type pktcSigDevToneSecondToneOff. For this tone type
pktcSigDevToneNumFrequencies MUST equal 4 and pktcSigDevToneNumFrequencies MUST equal 4 and
pktcSigDevToneNumOnOffTimes MUST equal 2. pktcSigDevToneNumOnOffTimes MUST equal 2.
allFrequenciesModulated indicates all frequencies allFrequenciesModulated indicates all frequencies
skipping to change at page 30, line 50 skipping to change at page 31, line 4
SYNTAX Unsigned32 (0..4000) SYNTAX Unsigned32 (0..4000)
UNITS "Hertz" UNITS "Hertz"
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This is the first frequency at which the tones could be " This is the first frequency at which the tones could be
generated in a multiple frequency tone." generated in a multiple frequency tone."
::={pktcSigDevToneEntry 5} ::={pktcSigDevToneEntry 5}
pktcSigDevToneSecondFrequency OBJECT-TYPE pktcSigDevToneSecondFrequency OBJECT-TYPE
PacketCable/IPCablecom NCS Signaling MIB July 2004
SYNTAX Unsigned32 (0..4000) SYNTAX Unsigned32 (0..4000)
UNITS "Hertz" UNITS "Hertz"
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This is the second frequency at which the tones could be " This is the second frequency at which the tones could be
PacketCable/IPCablecom NCS Signaling MIB February 2004
generated in a multiple frequency tone." generated in a multiple frequency tone."
::={pktcSigDevToneEntry 6} ::={pktcSigDevToneEntry 6}
pktcSigDevToneThirdFrequency OBJECT-TYPE pktcSigDevToneThirdFrequency OBJECT-TYPE
SYNTAX Unsigned32 (0..4000) SYNTAX Unsigned32 (0..4000)
UNITS "Hertz" UNITS "Hertz"
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This is the third frequency at which the tones could be " This is the third frequency at which the tones could be
skipping to change at page 31, line 50 skipping to change at page 32, line 4
pktcSigDevToneFirstToneOn OBJECT-TYPE pktcSigDevToneFirstToneOn OBJECT-TYPE
SYNTAX Unsigned32 (0..5000) SYNTAX Unsigned32 (0..5000)
UNITS "Milliseconds" UNITS "Milliseconds"
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This is the first tone interval." " This is the first tone interval."
::={ pktcSigDevToneEntry 10} ::={ pktcSigDevToneEntry 10}
pktcSigDevToneFirstToneOff OBJECT-TYPE pktcSigDevToneFirstToneOff OBJECT-TYPE
PacketCable/IPCablecom NCS Signaling MIB July 2004
SYNTAX Unsigned32 (0..5000) SYNTAX Unsigned32 (0..5000)
UNITS "Milliseconds" UNITS "Milliseconds"
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This is the first idle interval." " This is the first idle interval."
PacketCable/IPCablecom NCS Signaling MIB February 2004
::={ pktcSigDevToneEntry 11 } ::={ pktcSigDevToneEntry 11 }
pktcSigDevToneSecondToneOn OBJECT-TYPE pktcSigDevToneSecondToneOn OBJECT-TYPE
SYNTAX Unsigned32 (0..5000) SYNTAX Unsigned32 (0..5000)
UNITS "Milliseconds" UNITS "Milliseconds"
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This is the second tone interval." " This is the second tone interval."
::={ pktcSigDevToneEntry 12 } ::={ pktcSigDevToneEntry 12 }
skipping to change at page 32, line 50 skipping to change at page 33, line 4
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This is the third idle interval." " This is the third idle interval."
::={ pktcSigDevToneEntry 15 } ::={ pktcSigDevToneEntry 15 }
pktcSigDevToneFourthToneOn OBJECT-TYPE pktcSigDevToneFourthToneOn OBJECT-TYPE
SYNTAX Unsigned32 (0..5000) SYNTAX Unsigned32 (0..5000)
UNITS "Milliseconds" UNITS "Milliseconds"
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
PacketCable/IPCablecom NCS Signaling MIB July 2004
DESCRIPTION DESCRIPTION
" This is the fourth tone interval." " This is the fourth tone interval."
::={ pktcSigDevToneEntry 16 } ::={ pktcSigDevToneEntry 16 }
pktcSigDevToneFourthToneOff OBJECT-TYPE pktcSigDevToneFourthToneOff OBJECT-TYPE
SYNTAX Unsigned32 (0..5000) SYNTAX Unsigned32 (0..5000)
PacketCable/IPCablecom NCS Signaling MIB February 2004
UNITS "Milliseconds" UNITS "Milliseconds"
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This is the Fourth idle interval." " This is the Fourth idle interval."
::={ pktcSigDevToneEntry 17 } ::={ pktcSigDevToneEntry 17 }
pktcSigDevToneWholeToneRepeatCount OBJECT-TYPE pktcSigDevToneWholeToneRepeatCount OBJECT-TYPE
SYNTAX Unsigned32 (0..5000) SYNTAX Unsigned32 (0..5000)
MAX-ACCESS read-write MAX-ACCESS read-write
skipping to change at page 33, line 50 skipping to change at page 34, line 4
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This table describes the information pertaining to each " This table describes the information pertaining to each
endpoint of the MTA. All entries in this table represent endpoint of the MTA. All entries in this table represent
the provisioned endpoints provisioned with the information the provisioned endpoints provisioned with the information
required by the MTA to maintain the NCS signaling protocol required by the MTA to maintain the NCS signaling protocol
communication with the CMS. Each endpoint can be assigned communication with the CMS. Each endpoint can be assigned
to a its own CMS. If the specific endpoint does not have to a its own CMS. If the specific endpoint does not have
the corresponding CMS information in this table, the the corresponding CMS information in this table, the
PacketCable/IPCablecom NCS Signaling MIB July 2004
endpoint is considered as not provisioned with voice endpoint is considered as not provisioned with voice
services. Objects in this table do not persist across services. Objects in this table do not persist across
MTA reboots." MTA reboots."
::= { pktcNcsEndPntConfigObjects 1 } ::= { pktcNcsEndPntConfigObjects 1 }
pktcNcsEndPntConfigEntry OBJECT-TYPE pktcNcsEndPntConfigEntry OBJECT-TYPE
PacketCable/IPCablecom NCS Signaling MIB February 2004
SYNTAX PktcNcsEndPntConfigEntry SYNTAX PktcNcsEndPntConfigEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" Entries in pktcNcsEndPntConfigTable Each entry " Entries in pktcNcsEndPntConfigTable Each entry
represents the required signaling parameters for the represents the required signaling parameters for the
specific endpoint provisioned with voice services." specific endpoint provisioned with voice services."
INDEX { ifIndex } INDEX { ifIndex }
::= { pktcNcsEndPntConfigTable 1 } ::= { pktcNcsEndPntConfigTable 1 }
skipping to change at page 34, line 50 skipping to change at page 35, line 4
pktcNcsEndPntConfigRtoInit Unsigned32, pktcNcsEndPntConfigRtoInit Unsigned32,
pktcNcsEndPntConfigLongDurationKeepAlive Unsigned32, pktcNcsEndPntConfigLongDurationKeepAlive Unsigned32,
pktcNcsEndPntConfigThist Unsigned32, pktcNcsEndPntConfigThist Unsigned32,
pktcNcsEndPntConfigStatus RowStatus, pktcNcsEndPntConfigStatus RowStatus,
pktcNcsEndPntConfigCallWaitingMaxRep Unsigned32, pktcNcsEndPntConfigCallWaitingMaxRep Unsigned32,
pktcNcsEndPntConfigCallWaitingDelay Unsigned32, pktcNcsEndPntConfigCallWaitingDelay Unsigned32,
pktcNcsEndPntStatusCallIpAddressType InetAddressType, pktcNcsEndPntStatusCallIpAddressType InetAddressType,
pktcNcsEndPntStatusCallIpAddress InetAddress, pktcNcsEndPntStatusCallIpAddress InetAddress,
pktcNcsEndPntStatusError INTEGER, pktcNcsEndPntStatusError INTEGER,
pktcNcsEndPntConfigMinHookFlash Unsigned32, pktcNcsEndPntConfigMinHookFlash Unsigned32,
PacketCable/IPCablecom NCS Signaling MIB July 2004
pktcNcsEndPntConfigMaxHookFlash Unsigned32, pktcNcsEndPntConfigMaxHookFlash Unsigned32,
pktcNcsEndPntConfigPulseDialInterdigitTime Unsigned32, pktcNcsEndPntConfigPulseDialInterdigitTime Unsigned32,
pktcNcsEndPntConfigPulseDialMinMakeTime Unsigned32, pktcNcsEndPntConfigPulseDialMinMakeTime Unsigned32,
pktcNcsEndPntConfigPulseDialMaxMakeTime Unsigned32, pktcNcsEndPntConfigPulseDialMaxMakeTime Unsigned32,
pktcNcsEndPntConfigPulseDialMinBreakTime Unsigned32, pktcNcsEndPntConfigPulseDialMinBreakTime Unsigned32,
pktcNcsEndPntConfigPulseDialMaxBreakTime Unsigned32 pktcNcsEndPntConfigPulseDialMaxBreakTime Unsigned32
PacketCable/IPCablecom NCS Signaling MIB February 2004
} }
pktcNcsEndPntConfigCallAgentId OBJECT-TYPE pktcNcsEndPntConfigCallAgentId OBJECT-TYPE
SYNTAX SnmpAdminString(SIZE (3..255)) SYNTAX SnmpAdminString(SIZE (3..255))
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object contains a string indicating the call agent " This object contains a string indicating the call agent
name. (e.g.,: ca@example.com). The call agent name after name (e.g.: ca@example.com). The call agent name, after
the @ character must be a fully qualified domain name and the character '@', MUST be a fully qualified domain name
have a corresponding pktcMtaDevCmsFqdn entry in the and MUST have a corresponding pktcMtaDevCmsFqdn entry in
pktcMtaDevCmsTable. The object pktcMtaDevCmsFqdn is the pktcMtaDevCmsTable. The object pktcMtaDevCmsFqdn is
defined in the PacketCable MIBMTA Specification." defined in the PacketCable MIBMTA Specification. For each
particular endpoint, the MTA MUST use the current value
of this object to communicate with the corresponding
CMS. The MTA MUST update this object with the value of the
'Notified Entity' parameter of the NCS messages when
provided. Because of the high importance of this object to
the ability of the MTA to maintain reliable NCS
communication with the CMS, it is highly recommended not
to change this object's value through management
station during normal operations."
::= { pktcNcsEndPntConfigEntry 1 } ::= { pktcNcsEndPntConfigEntry 1 }
pktcNcsEndPntConfigCallAgentUdpPort OBJECT-TYPE pktcNcsEndPntConfigCallAgentUdpPort OBJECT-TYPE
SYNTAX InetPortNumber (1025..65535) SYNTAX InetPortNumber (1025..65535)
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object contains the call agent User Datagram Protocol " This object contains the current value of the User
(UDP) receive port that is being used for this instance of Datagram Protocol (UDP) receive port on which the
call signaling, i.e. the default port on which the call call agent will receive NCS signaling from the endpoint.
agent will receive NCS signaling from the endpoint." For each particular endpoint, the MTA MUST use the current
value of this object to communicate with the corresponding
CMS. The MTA MUST update this object with the value of the
'Notified Entity' parameter of the NCS messages when
provided. Because of the high importance of this object to
the ability of the MTA to maintain reliable NCS
communication with the CMS, it is highly recommended not
to change this object's value through management
station during normal operations."
REFERENCE REFERENCE
"PacketCable NCS Specification" "PacketCable NCS Specification"
PacketCable/IPCablecom NCS Signaling MIB July 2004
DEFVAL { 2727 } DEFVAL { 2727 }
::= { pktcNcsEndPntConfigEntry 2 } ::= { pktcNcsEndPntConfigEntry 2 }
pktcNcsEndPntConfigPartialDialTO OBJECT-TYPE pktcNcsEndPntConfigPartialDialTO OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object contains maximum value of the partial dial " This object contains maximum value of the partial dial
skipping to change at page 36, line 4 skipping to change at page 36, line 30
DEFVAL { 16 } DEFVAL { 16 }
::= { pktcNcsEndPntConfigEntry 3 } ::= { pktcNcsEndPntConfigEntry 3 }
pktcNcsEndPntConfigCriticalDialTO OBJECT-TYPE pktcNcsEndPntConfigCriticalDialTO OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object contains the maximum value of the critical " This object contains the maximum value of the critical
PacketCable/IPCablecom NCS Signaling MIB February 2004
dial time out." dial time out."
REFERENCE REFERENCE
"PacketCable NCS Specification" "PacketCable NCS Specification"
DEFVAL { 4 } DEFVAL { 4 }
::= { pktcNcsEndPntConfigEntry 4 } ::= { pktcNcsEndPntConfigEntry 4 }
pktcNcsEndPntConfigBusyToneTO OBJECT-TYPE pktcNcsEndPntConfigBusyToneTO OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object contains the timeout value for busy tone." " This object contains the default timeout value for busy
tone. The MTA MUST NOT update this object with the
value provided in the NCS message (if present). If
the value of the object is modified by the SNMP Management
Station, the MTA MUST use the new value as a default only
for a new signal requested by the NCS message."
REFERENCE REFERENCE
"PacketCable NCS Specification" "PacketCable NCS Specification"
DEFVAL { 30 } DEFVAL { 30 }
::= { pktcNcsEndPntConfigEntry 5 } ::= { pktcNcsEndPntConfigEntry 5 }
pktcNcsEndPntConfigDialToneTO OBJECT-TYPE pktcNcsEndPntConfigDialToneTO OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "seconds" UNITS "seconds"
PacketCable/IPCablecom NCS Signaling MIB July 2004
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object contains the timeout value for dial tone." " This object contains the default timeout value for dial
tone. The MTA MUST NOT update this object with the
value provided in the NCS message (if present). If
the value of the object is modified by the SNMP Management
Station, the MTA MUST use the new value as a default only
for a new signal requested by the NCS message."
REFERENCE REFERENCE
"PacketCable NCS Specification" "PacketCable NCS Specification"
DEFVAL { 16 } DEFVAL { 16 }
::= { pktcNcsEndPntConfigEntry 6 } ::= { pktcNcsEndPntConfigEntry 6 }
pktcNcsEndPntConfigMessageWaitingTO OBJECT-TYPE pktcNcsEndPntConfigMessageWaitingTO OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object contains the timeout value for message waiting " This object contains the default timeout value for message
indicator." waiting indicator. The MTA MUST NOT update this object
with the value provided in the NCS message (if
present). If the value of the object is modified by the
SNMP Management Station, the MTA MUST use the new value as
a default only for a new signal requested by the NCS
message."
REFERENCE REFERENCE
"PacketCable NCS Specification" "PacketCable NCS Specification"
DEFVAL { 16 } DEFVAL { 16 }
::= { pktcNcsEndPntConfigEntry 7 } ::= { pktcNcsEndPntConfigEntry 7 }
pktcNcsEndPntConfigOffHookWarnToneTO OBJECT-TYPE pktcNcsEndPntConfigOffHookWarnToneTO OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object contains the default timeout value for the off
PacketCable/IPCablecom NCS Signaling MIB February 2004 hook Warning tone. The MTA MUST NOT update this object
with the value provided in the NCS message (if
" This object contains timeout value for off hook Warning present). If the value of the object is modified by the
tone." SNMP Management Station, the MTA MUST use the new value as
a default only for a new signal requested by the NCS
message."
REFERENCE REFERENCE
"PacketCable NCS Specification" "PacketCable NCS Specification"
DEFVAL { 0 } DEFVAL { 0 }
::= { pktcNcsEndPntConfigEntry 8 } ::= { pktcNcsEndPntConfigEntry 8 }
PacketCable/IPCablecom NCS Signaling MIB July 2004
pktcNcsEndPntConfigRingingTO OBJECT-TYPE pktcNcsEndPntConfigRingingTO OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object contains the timeout value for ringing." " This object contains the default timeout value for
ringing. The MTA MUST NOT update this object with the
value provided in the NCS message (if present). If
the value of the object is modified by the SNMP Management
Station, the MTA MUST use the new value as a default only
for a new signal requested by the NCS message."
REFERENCE REFERENCE
"PacketCable NCS Specification" "PacketCable NCS Specification"
DEFVAL { 180 } DEFVAL { 180 }
::= { pktcNcsEndPntConfigEntry 9 } ::= { pktcNcsEndPntConfigEntry 9 }
pktcNcsEndPntConfigRingBackTO OBJECT-TYPE pktcNcsEndPntConfigRingBackTO OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object contains the timeout value for ring back." " This object contains the default timeout value for ring
back. The MTA MUST NOT update this object with the
value provided in the NCS message (if present). If
the value of the object is modified by the SNMP Management
Station, the MTA MUST use the new value as a default only
for a new signal requested by the NCS message."
REFERENCE REFERENCE
"PacketCable NCS Specification" "PacketCable NCS Specification"
DEFVAL { 180 } DEFVAL { 180 }
::= { pktcNcsEndPntConfigEntry 10 } ::= { pktcNcsEndPntConfigEntry 10 }
pktcNcsEndPntConfigReorderToneTO OBJECT-TYPE pktcNcsEndPntConfigReorderToneTO OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object contains the timeout value for reorder tone." " This object contains the default timeout value for reorder
tone. The MTA MUST NOT update this object with the
value provided in the NCS message (if present). If
the value of the object is modified by the SNMP Management
Station, the MTA MUST use the new value as a default only
for a new signal requested by the NCS message."
REFERENCE REFERENCE
"PacketCable NCS Specification" "PacketCable NCS Specification"
PacketCable/IPCablecom NCS Signaling MIB July 2004
DEFVAL { 30 } DEFVAL { 30 }
::= { pktcNcsEndPntConfigEntry 11 } ::= { pktcNcsEndPntConfigEntry 11 }
pktcNcsEndPntConfigStutterDialToneTO OBJECT-TYPE pktcNcsEndPntConfigStutterDialToneTO OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object contains the default timeout value for stutter
PacketCable/IPCablecom NCS Signaling MIB February 2004 dial tone. The MTA MUST NOT update this object with the
value provided in the NCS message (if present). If
" This object contains timeout value for stutter dial tone." the value of the object is modified by the SNMP Management
Station, the MTA MUST use the new value as a default only
for a new signal requested by the NCS message."
REFERENCE REFERENCE
"PacketCable NCS Specification" "PacketCable NCS Specification"
DEFVAL { 16 } DEFVAL { 16 }
::= { pktcNcsEndPntConfigEntry 12 } ::= { pktcNcsEndPntConfigEntry 12 }
pktcNcsEndPntConfigTSMax OBJECT-TYPE pktcNcsEndPntConfigTSMax OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
skipping to change at page 38, line 42 skipping to change at page 40, line 4
REFERENCE REFERENCE
"PacketCable NCS Specification" "PacketCable NCS Specification"
DEFVAL { 5 } DEFVAL { 5 }
::= { pktcNcsEndPntConfigEntry 14 } ::= { pktcNcsEndPntConfigEntry 14 }
pktcNcsEndPntConfigMax2 OBJECT-TYPE pktcNcsEndPntConfigMax2 OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
PacketCable/IPCablecom NCS Signaling MIB July 2004
" This object contains the disconnect error threshold for " This object contains the disconnect error threshold for
signaling messages." signaling messages."
REFERENCE REFERENCE
"PacketCable NCS Specification" "PacketCable NCS Specification"
DEFVAL { 7 } DEFVAL { 7 }
::= { pktcNcsEndPntConfigEntry 15 } ::= { pktcNcsEndPntConfigEntry 15 }
pktcNcsEndPntConfigMax1QEnable OBJECT-TYPE pktcNcsEndPntConfigMax1QEnable OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object enables/disables the Max1 Domain Name Server " This object enables/disables the Max1 Domain Name Server
(DNS) query operation when Max1 expires." (DNS) query operation when Max1 expires."
PacketCable/IPCablecom NCS Signaling MIB February 2004
DEFVAL { true } DEFVAL { true }
::= { pktcNcsEndPntConfigEntry 16 } ::= { pktcNcsEndPntConfigEntry 16 }
pktcNcsEndPntConfigMax2QEnable OBJECT-TYPE pktcNcsEndPntConfigMax2QEnable OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object enables/disables the Max2 DNS query operation " This object enables/disables the Max2 DNS query operation
when Max2 expires." when Max2 expires."
skipping to change at page 39, line 42 skipping to change at page 41, line 4
::= { pktcNcsEndPntConfigEntry 18 } ::= { pktcNcsEndPntConfigEntry 18 }
pktcNcsEndPntConfigTdinit OBJECT-TYPE pktcNcsEndPntConfigTdinit OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object contains the initial number of seconds the MTA " This object contains the initial number of seconds the MTA
waits after a disconnect. When this timer expires the MTA waits after a disconnect. When this timer expires the MTA
PacketCable/IPCablecom NCS Signaling MIB July 2004
initiates the disconnected procedure." initiates the disconnected procedure."
REFERENCE REFERENCE
"PacketCable NCS Specification" "PacketCable NCS Specification"
DEFVAL { 15 } DEFVAL { 15 }
::= { pktcNcsEndPntConfigEntry 19 } ::= { pktcNcsEndPntConfigEntry 19 }
pktcNcsEndPntConfigTdmin OBJECT-TYPE pktcNcsEndPntConfigTdmin OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object contains the minimum number of seconds the MTA " This object contains the minimum number of seconds the MTA
waits after a disconnect. When this timer expires the MTA waits after a disconnect. When this timer expires the MTA
PacketCable/IPCablecom NCS Signaling MIB February 2004
initiates the disconnected procedure." initiates the disconnected procedure."
REFERENCE REFERENCE
"PacketCable NCS Specification" "PacketCable NCS Specification"
DEFVAL { 15 } DEFVAL { 15 }
::= { pktcNcsEndPntConfigEntry 20 } ::= { pktcNcsEndPntConfigEntry 20 }
pktcNcsEndPntConfigTdmax OBJECT-TYPE pktcNcsEndPntConfigTdmax OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "seconds" UNITS "seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
skipping to change at page 40, line 42 skipping to change at page 42, line 5
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object contains the maximum number of seconds for the " This object contains the maximum number of seconds for the
retransmission timer. When this timer expires the MTA retransmission timer. When this timer expires the MTA
retransmits the message." retransmits the message."
REFERENCE REFERENCE
"PacketCable NCS Specification" "PacketCable NCS Specification"
DEFVAL { 4 } DEFVAL { 4 }
::= { pktcNcsEndPntConfigEntry 22 } ::= { pktcNcsEndPntConfigEntry 22 }
PacketCable/IPCablecom NCS Signaling MIB July 2004
pktcNcsEndPntConfigRtoInit OBJECT-TYPE pktcNcsEndPntConfigRtoInit OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "milliseconds" UNITS "milliseconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object contains the initial number of seconds for the " This object contains the initial number of seconds for the
retransmission timer." retransmission timer."
REFERENCE REFERENCE
"PacketCable NCS Specification" "PacketCable NCS Specification"
DEFVAL { 200 } DEFVAL { 200 }
::= { pktcNcsEndPntConfigEntry 23 } ::= { pktcNcsEndPntConfigEntry 23 }
pktcNcsEndPntConfigLongDurationKeepAlive OBJECT-TYPE pktcNcsEndPntConfigLongDurationKeepAlive OBJECT-TYPE
PacketCable/IPCablecom NCS Signaling MIB February 2004
SYNTAX Unsigned32 SYNTAX Unsigned32
UNITS "minutes" UNITS "minutes"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" Specifies a timeout value in minutes for sending long " Specifies a timeout value in minutes for sending long
duration call notification message." duration call notification message."
REFERENCE REFERENCE
"PacketCable NCS Specification" "PacketCable NCS Specification"
DEFVAL { 60 } DEFVAL { 60 }
skipping to change at page 41, line 37 skipping to change at page 42, line 51
"PacketCable NCS Specification" "PacketCable NCS Specification"
DEFVAL { 30 } DEFVAL { 30 }
::= { pktcNcsEndPntConfigEntry 25 } ::= { pktcNcsEndPntConfigEntry 25 }
pktcNcsEndPntConfigStatus OBJECT-TYPE pktcNcsEndPntConfigStatus OBJECT-TYPE
SYNTAX RowStatus SYNTAX RowStatus
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object contains the Row Status associated with the " This object contains the Row Status associated with the
pktsNcsEndPntTable. " pktcNcsEndPntConfigTable. "
::= { pktcNcsEndPntConfigEntry 26 } ::= { pktcNcsEndPntConfigEntry 26 }
pktcNcsEndPntConfigCallWaitingMaxRep OBJECT-TYPE pktcNcsEndPntConfigCallWaitingMaxRep OBJECT-TYPE
SYNTAX Unsigned32 (0..10) SYNTAX Unsigned32 (0..10)
PacketCable/IPCablecom NCS Signaling MIB July 2004
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object contains the maximum number of repetitions " This object contains the default value of the maximum
of the call waiting tone that the MTA will play from a number of repetitions of the call waiting tone that the
single CMS request. A value of zero (0) can be used if MTA will play from a single CMS request. The MTA MUST NOT
the CMS is to control the repetitions of the call waiting update this object with the information provided in the
tone." NCS message (if present). If the value of the object is
modified by the SNMP Management Station, the MTA MUST use
the new value as a default only for a new signal
requested by the NCS message."
DEFVAL { 1 } DEFVAL { 1 }
::= { pktcNcsEndPntConfigEntry 27 } ::= { pktcNcsEndPntConfigEntry 27 }
pktcNcsEndPntConfigCallWaitingDelay OBJECT-TYPE pktcNcsEndPntConfigCallWaitingDelay OBJECT-TYPE
SYNTAX Unsigned32 (1..100) SYNTAX Unsigned32 (1..100)
UNITS "seconds" UNITS "seconds"
PacketCable/IPCablecom NCS Signaling MIB February 2004
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object contains the delay between repetitions of the " This object contains the delay between repetitions of the
call waiting tone that the MTA will play from a single CMS call waiting tone that the MTA will play from a single CMS
request." request."
DEFVAL { 10 } DEFVAL { 10 }
::= { pktcNcsEndPntConfigEntry 28 } ::= { pktcNcsEndPntConfigEntry 28 }
pktcNcsEndPntStatusCallIpAddressType OBJECT-TYPE pktcNcsEndPntStatusCallIpAddressType OBJECT-TYPE
skipping to change at page 42, line 39 skipping to change at page 44, line 4
DESCRIPTION DESCRIPTION
" This object contains the Internet address of the CMS " This object contains the Internet address of the CMS
currently being used for this endpoint. This Internet currently being used for this endpoint. This Internet
address is used to create the appropriate security address is used to create the appropriate security
association. The type of this IP address is determined by association. The type of this IP address is determined by
the value of the pktcNcsEndPntStatusCallIpAddressType the value of the pktcNcsEndPntStatusCallIpAddressType
object." object."
::= { pktcNcsEndPntConfigEntry 30 } ::= { pktcNcsEndPntConfigEntry 30 }
pktcNcsEndPntStatusError OBJECT-TYPE pktcNcsEndPntStatusError OBJECT-TYPE
PacketCable/IPCablecom NCS Signaling MIB July 2004
SYNTAX INTEGER { SYNTAX INTEGER {
operational (1), operational (1),
noSecurityAssociation (2), noSecurityAssociation (2),
disconnected (3) disconnected (3)
} }
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This object contains the error status for this interface. " This object contains the error status for this interface.
The operational status indicates that all operations The operational status indicates that all operations
necessary to put the line in service have occurred, and the necessary to put the line in service have occurred, and the
CMS has acknowledged the RSIP message successfully. If CMS has acknowledged the RSIP message successfully. If
pktcMtaDevCmsIpsecCtrl is enabled for the associated Call pktcMtaDevCmsIpsecCtrl is enabled for the associated Call
Agent, the noSecurityAssociation status indicates that no Agent, the noSecurityAssociation status indicates that no
Security Association (SA) yet exists for this endpoint. Security Association (SA) yet exists for this endpoint.
Otherwise, the state is unused. The disconnected status Otherwise, the state is unused. The disconnected status
indicates one of the following two: indicates one of the following two:
PacketCable/IPCablecom NCS Signaling MIB February 2004
If pktcMtaDevCmsIpsecCtrl is disabled, then no security If pktcMtaDevCmsIpsecCtrl is disabled, then no security
association is involved with this endpoint. The NCS association is involved with this endpoint. The NCS
signaling software is in process of establishing the NCS signaling software is in process of establishing the NCS
signaling link via an RSIP exchange. signaling link via an RSIP exchange.
Otherwise, pktcMtaDevCmsIpsecCtrl is enabled, the security Otherwise, pktcMtaDevCmsIpsecCtrl is enabled, the security
Association has been established, and the NCS signaling Association has been established, and the NCS signaling
software is in process of establishing the NCS signaling software is in process of establishing the NCS signaling
link via an RSIP exchange." link via an RSIP exchange."
::= { pktcNcsEndPntConfigEntry 31 } ::= { pktcNcsEndPntConfigEntry 31 }
pktcNcsEndPntConfigMinHookFlash OBJECT-TYPE pktcNcsEndPntConfigMinHookFlash OBJECT-TYPE
SYNTAX Unsigned32 (20..1000) SYNTAX Unsigned32 (20..1000)
UNITS "Milliseconds" UNITS "Milliseconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This is the minimum time a line needs to be on hook for a " This is the minimum time a line needs to be on hook for a
valid hook flash. The value of this object MUST be valid hook flash. The value of this object MUST be
greater than the value of greater than the value of
pktcNcsEndPntConfigPulseMaxBreakTime. This object must pktcNcsEndPntConfigPulseDialMaxBreakTime. This object must
only be set via the configuration file during the only be set via the configuration file during the
provisioning process." provisioning process."
DEFVAL { 300 } DEFVAL { 300 }
::= { pktcNcsEndPntConfigEntry 32 } ::= { pktcNcsEndPntConfigEntry 32 }
pktcNcsEndPntConfigMaxHookFlash OBJECT-TYPE pktcNcsEndPntConfigMaxHookFlash OBJECT-TYPE
SYNTAX Unsigned32 (20..500) SYNTAX Unsigned32 (20..1000)
UNITS "Milliseconds" UNITS "Milliseconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This is the maximum time a line needs to be on hook for a " This is the maximum time a line needs to be on hook for a
PacketCable/IPCablecom NCS Signaling MIB July 2004
valid hook flash. This object must only be set via the valid hook flash. This object must only be set via the
configuration file during the provisioning process." configuration file during the provisioning process."
DEFVAL { 500 } DEFVAL { 500 }
::= { pktcNcsEndPntConfigEntry 33 } ::= { pktcNcsEndPntConfigEntry 33 }
pktcNcsEndPntConfigPulseDialInterdigitTime OBJECT-TYPE pktcNcsEndPntConfigPulseDialInterdigitTime OBJECT-TYPE
SYNTAX Unsigned32 (100..1500) SYNTAX Unsigned32 (100..1500)
UNITS "Milliseconds" UNITS "Milliseconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This is the pulse dial inter-digit timeout. This object " This is the pulse dial inter-digit timeout. This object
must only be set via the configuration file during the must only be set via the configuration file during the
provisioning process." provisioning process."
DEFVAL { 100 } DEFVAL { 100 }
::= { pktcNcsEndPntConfigEntry 34 } ::= { pktcNcsEndPntConfigEntry 34 }
PacketCable/IPCablecom NCS Signaling MIB February 2004
pktcNcsEndPntConfigPulseDialMinMakeTime OBJECT-TYPE pktcNcsEndPntConfigPulseDialMinMakeTime OBJECT-TYPE
SYNTAX Unsigned32 (20..200) SYNTAX Unsigned32 (20..200)
UNITS "Milliseconds" UNITS "Milliseconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This is the minimum make pulse width for the dial pulse. " This is the minimum make pulse width for the dial pulse.
This object must only be set via the configuration file This object must only be set via the configuration file
during the provisioning process." during the provisioning process."
DEFVAL { 25 } DEFVAL { 25 }
skipping to change at page 44, line 39 skipping to change at page 46, line 4
::= { pktcNcsEndPntConfigEntry 36 } ::= { pktcNcsEndPntConfigEntry 36 }
pktcNcsEndPntConfigPulseDialMinBreakTime OBJECT-TYPE pktcNcsEndPntConfigPulseDialMinBreakTime OBJECT-TYPE
SYNTAX Unsigned32 (20..200) SYNTAX Unsigned32 (20..200)
UNITS "Milliseconds" UNITS "Milliseconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This is the minimum break pulse width for the dial pulse. " This is the minimum break pulse width for the dial pulse.
This object must only be set via the configuration file This object must only be set via the configuration file
PacketCable/IPCablecom NCS Signaling MIB July 2004
during the provisioning process." during the provisioning process."
DEFVAL { 45 } DEFVAL { 45 }
::= { pktcNcsEndPntConfigEntry 37 } ::= { pktcNcsEndPntConfigEntry 37 }
pktcNcsEndPntConfigPulseDialMaxBreakTime OBJECT-TYPE pktcNcsEndPntConfigPulseDialMaxBreakTime OBJECT-TYPE
SYNTAX Unsigned32 (20..200) SYNTAX Unsigned32 (20..200)
UNITS "Milliseconds" UNITS "Milliseconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" This is the maximum break pulse width for the dial pulse. " This is the maximum break pulse width for the dial pulse.
This object must only be set via the configuration file This object must only be set via the configuration file
during the provisioning process." during the provisioning process."
DEFVAL { 75 } DEFVAL { 75 }
::= { pktcNcsEndPntConfigEntry 38 } ::= { pktcNcsEndPntConfigEntry 38 }
PacketCable/IPCablecom NCS Signaling MIB February 2004
-- --
-- notification group is for future extension. -- notification group is for future extension.
-- --
pktcSigNotification OBJECT IDENTIFIER ::= { pktcSigMib 0 } pktcSigNotification OBJECT IDENTIFIER ::= { pktcSigMib 0 }
pktcSigConformance OBJECT IDENTIFIER ::= { pktcSigMib 2 } pktcSigConformance OBJECT IDENTIFIER ::= { pktcSigMib 2 }
pktcSigCompliances OBJECT IDENTIFIER ::= { pktcSigConformance 1 } pktcSigCompliances OBJECT IDENTIFIER ::= { pktcSigConformance 1 }
pktcSigGroups OBJECT IDENTIFIER ::= { pktcSigConformance 2 } pktcSigGroups OBJECT IDENTIFIER ::= { pktcSigConformance 2 }
-- --
-- compliance statements -- compliance statements
skipping to change at page 45, line 40 skipping to change at page 47, line 5
MANDATORY-GROUPS { MANDATORY-GROUPS {
pktcSigGroup pktcSigGroup
} }
GROUP pktcNcsGroup GROUP pktcNcsGroup
DESCRIPTION DESCRIPTION
" This group is mandatory for any MTA implementing NCS " This group is mandatory for any MTA implementing NCS
signaling" signaling"
PacketCable/IPCablecom NCS Signaling MIB July 2004
GROUP pktcInternationalGroup GROUP pktcInternationalGroup
DESCRIPTION DESCRIPTION
" This group is mandatory for any MTA implementing " This group is mandatory for any MTA implementing
international telephony features. In such cases, it is international telephony features. In such cases, it is
left to manufacturers to determine whether to support both left to manufacturers to determine whether to support both
PacketCable and IPCablecom objects in the same MTA." PacketCable and IPCablecom objects in the same MTA."
::={ pktcSigCompliances 1 } ::={ pktcSigCompliances 1 }
-- --
-- units of conformance -- units of conformance
-- --
pktcSigGroup OBJECT-GROUP pktcSigGroup OBJECT-GROUP
OBJECTS { OBJECTS {
pktcSigDevCodecType, pktcSigDevCodecType,
pktcSigDevCodecMax, pktcSigDevCodecMax,
PacketCable/IPCablecom NCS Signaling MIB February 2004
pktcSigDevEchoCancellation, pktcSigDevEchoCancellation,
pktcSigDevSilenceSuppression, pktcSigDevSilenceSuppression,
pktcSigDevR0Cadence, pktcSigDevR0Cadence,
pktcSigDevR1Cadence, pktcSigDevR1Cadence,
pktcSigDevR2Cadence, pktcSigDevR2Cadence,
pktcSigDevR3Cadence, pktcSigDevR3Cadence,
pktcSigDevR4Cadence, pktcSigDevR4Cadence,
pktcSigDevR5Cadence, pktcSigDevR5Cadence,
pktcSigDevR6Cadence, pktcSigDevR6Cadence,
pktcSigDevR7Cadence, pktcSigDevR7Cadence,
skipping to change at page 46, line 39 skipping to change at page 48, line 4
"Group of objects for the common portion of the "Group of objects for the common portion of the
PacketCable Signaling MIB." PacketCable Signaling MIB."
::= { pktcSigGroups 1 } ::= { pktcSigGroups 1 }
pktcNcsGroup OBJECT-GROUP pktcNcsGroup OBJECT-GROUP
OBJECTS { OBJECTS {
pktcNcsEndPntConfigCallAgentId, pktcNcsEndPntConfigCallAgentId,
pktcNcsEndPntConfigCallAgentUdpPort, pktcNcsEndPntConfigCallAgentUdpPort,
pktcNcsEndPntConfigPartialDialTO, pktcNcsEndPntConfigPartialDialTO,
pktcNcsEndPntConfigCriticalDialTO, pktcNcsEndPntConfigCriticalDialTO,
PacketCable/IPCablecom NCS Signaling MIB July 2004
pktcNcsEndPntConfigBusyToneTO, pktcNcsEndPntConfigBusyToneTO,
pktcNcsEndPntConfigDialToneTO, pktcNcsEndPntConfigDialToneTO,
pktcNcsEndPntConfigMessageWaitingTO, pktcNcsEndPntConfigMessageWaitingTO,
pktcNcsEndPntConfigOffHookWarnToneTO, pktcNcsEndPntConfigOffHookWarnToneTO,
pktcNcsEndPntConfigRingingTO, pktcNcsEndPntConfigRingingTO,
pktcNcsEndPntConfigRingBackTO, pktcNcsEndPntConfigRingBackTO,
pktcNcsEndPntConfigReorderToneTO, pktcNcsEndPntConfigReorderToneTO,
pktcNcsEndPntConfigStutterDialToneTO, pktcNcsEndPntConfigStutterDialToneTO,
pktcNcsEndPntConfigTSMax, pktcNcsEndPntConfigTSMax,
pktcNcsEndPntConfigMax1, pktcNcsEndPntConfigMax1,
pktcNcsEndPntConfigMax2, pktcNcsEndPntConfigMax2,
pktcNcsEndPntConfigMax1QEnable, pktcNcsEndPntConfigMax1QEnable,
pktcNcsEndPntConfigMax2QEnable, pktcNcsEndPntConfigMax2QEnable,
pktcNcsEndPntConfigMWD, pktcNcsEndPntConfigMWD,
pktcNcsEndPntConfigTdinit, pktcNcsEndPntConfigTdinit,
pktcNcsEndPntConfigTdmin, pktcNcsEndPntConfigTdmin,
pktcNcsEndPntConfigTdmax, pktcNcsEndPntConfigTdmax,
PacketCable/IPCablecom NCS Signaling MIB February 2004
pktcNcsEndPntConfigRtoMax, pktcNcsEndPntConfigRtoMax,
pktcNcsEndPntConfigRtoInit, pktcNcsEndPntConfigRtoInit,
pktcNcsEndPntConfigLongDurationKeepAlive, pktcNcsEndPntConfigLongDurationKeepAlive,
pktcNcsEndPntConfigThist, pktcNcsEndPntConfigThist,
pktcNcsEndPntConfigStatus, pktcNcsEndPntConfigStatus,
pktcNcsEndPntConfigCallWaitingMaxRep, pktcNcsEndPntConfigCallWaitingMaxRep,
pktcNcsEndPntConfigCallWaitingDelay, pktcNcsEndPntConfigCallWaitingDelay,
pktcNcsEndPntStatusCallIpAddressType, pktcNcsEndPntStatusCallIpAddressType,
pktcNcsEndPntStatusCallIpAddress, pktcNcsEndPntStatusCallIpAddress,
pktcNcsEndPntStatusError pktcNcsEndPntStatusError
skipping to change at page 47, line 39 skipping to change at page 49, line 4
pktcNcsEndPntConfigPulseDialMinMakeTime, pktcNcsEndPntConfigPulseDialMinMakeTime,
pktcNcsEndPntConfigPulseDialMaxMakeTime, pktcNcsEndPntConfigPulseDialMaxMakeTime,
pktcNcsEndPntConfigPulseDialMinBreakTime, pktcNcsEndPntConfigPulseDialMinBreakTime,
pktcNcsEndPntConfigPulseDialMaxBreakTime, pktcNcsEndPntConfigPulseDialMaxBreakTime,
pktcSigDevRingCadence, pktcSigDevRingCadence,
pktcSigDevCallerIdSigProtocol, pktcSigDevCallerIdSigProtocol,
pktcSigDevCIDMode, pktcSigDevCIDMode,
pktcSigDevCIDFskAfterRing, pktcSigDevCIDFskAfterRing,
pktcSigDevCIDFskAfterDTAS, pktcSigDevCIDFskAfterDTAS,
pktcSigDevCIDFskAfterRPAS, pktcSigDevCIDFskAfterRPAS,
PacketCable/IPCablecom NCS Signaling MIB July 2004
pktcSigDevCIDRingAfterFSK, pktcSigDevCIDRingAfterFSK,
pktcSigDevCIDDTASAfterLR, pktcSigDevCIDDTASAfterLR,
pktcSigDevVmwiFskAfterDTAS, pktcSigDevVmwiFskAfterDTAS,
pktcSigDevVmwiFskAfterRPAS, pktcSigDevVmwiFskAfterRPAS,
pktcSigDevVmwiDTASAfterLR, pktcSigDevVmwiDTASAfterLR,
pktcSigPowerRingFrequency, pktcSigPowerRingFrequency,
pktcSigPulseSignalType,
pktcSigPulseSignalFrequency, pktcSigPulseSignalFrequency,
pktcSigPulseSignalDbLevel, pktcSigPulseSignalDbLevel,
pktcSigPulseSignalDuration, pktcSigPulseSignalDuration,
pktcPulseSignalPulseInterval, pktcSigPulseSignalPulseInterval,
pktcSigPulseSignalRepeatCount, pktcSigPulseSignalRepeatCount,
pktcSigDevToneDbLevel, pktcSigDevToneDbLevel,
pktcSigDevToneFreqType, pktcSigDevToneFreqType,
pktcSigDevToneNumFrequencies, pktcSigDevToneNumFrequencies,
pktcSigDevToneFirstFrequency, pktcSigDevToneFirstFrequency,
pktcSigDevToneSecondFrequency, pktcSigDevToneSecondFrequency,
PacketCable/IPCablecom NCS Signaling MIB February 2004
pktcSigDevToneThirdFrequency, pktcSigDevToneThirdFrequency,
pktcSigDevToneFourthFrequency, pktcSigDevToneFourthFrequency,
pktcSigDevToneNumOnOffTimes, pktcSigDevToneNumOnOffTimes,
pktcSigDevToneFirstToneOn, pktcSigDevToneFirstToneOn,
pktcSigDevToneFirstToneOff, pktcSigDevToneFirstToneOff,
pktcSigDevToneSecondToneOn, pktcSigDevToneSecondToneOn,
pktcSigDevToneSecondToneOff, pktcSigDevToneSecondToneOff,
pktcSigDevToneThirdToneOn, pktcSigDevToneThirdToneOn,
pktcSigDevToneThirdToneOff, pktcSigDevToneThirdToneOff,
pktcSigDevToneFourthToneOn, pktcSigDevToneFourthToneOn,
skipping to change at page 48, line 41 skipping to change at page 50, line 4
5. 5.
Acknowledgments Acknowledgments
This document is a production of the PacketCable Working Group. This document is a production of the PacketCable Working Group.
The current editors wish to express gratitude to: The current editors wish to express gratitude to:
Angela Lyda Arris Interactive Angela Lyda Arris Interactive
Sasha Medvinsky Motorola Sasha Medvinsky Motorola
PacketCable/IPCablecom NCS Signaling MIB July 2004
Roy Spitzer Telogy Networks, Inc. Roy Spitzer Telogy Networks, Inc.
Rick Vetter Motorola Rick Vetter Motorola
Itay Sherman Texas Instruments Itay Sherman Texas Instruments
Klaus Hermanns Cisco Systems Klaus Hermanns Cisco Systems
Eugene Nechamkin Broadcom Corp Eugene Nechamkin Broadcom Corp
Matt A. Osman CableLabs Matt A. Osman CableLabs
Jean-Francois Mule CableLabs Jean-Francois Mule CableLabs
Rich Woundy Comcast Rich Woundy Comcast
Bert Wijnen Lucent Bert Wijnen Lucent
Mike Heard Consultant Mike Heard Consultant
Phil Freyman Motorola
6. 6.
Normative References Normative References
[RFC2578] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J., [RFC2578] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
Rose, M. and S. Waldbusser, "Structure of Management Rose, M. and S. Waldbusser, "Structure of Management
Information Version 2 (SMIv2)", STD 58, RFC 2578, April Information Version 2 (SMIv2)", STD 58, RFC 2578, April
PacketCable/IPCablecom NCS Signaling MIB February 2004
1999. 1999.
[RFC2579] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J., [RFC2579] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
Rose, M. and S. Waldbusser, "Textual Conventions for Rose, M. and S. Waldbusser, "Textual Conventions for
SMIv2", STD 58, RFC 2579, April 1999. SMIv2", STD 58, RFC 2579, April 1999.
[RFC2580] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J., [RFC2580] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, J.,
Rose, M. and S. Waldbusser, "Conformance Statements for Rose, M. and S. Waldbusser, "Conformance Statements for
SMIv2", STD 58, RFC 2580, April 1999. SMIv2", STD 58, RFC 2580, April 1999.
skipping to change at page 49, line 40 skipping to change at page 51, line 5
-- successor) is published as an RFC prior to, or concurrently with -- successor) is published as an RFC prior to, or concurrently with
-- this document, then the normative reference [RFC3291] should be -- this document, then the normative reference [RFC3291] should be
-- updated to point to the replacement RFC, and the reference tag -- updated to point to the replacement RFC, and the reference tag
-- [RFC3291] should be updated to match. -- [RFC3291] should be updated to match.
-- --
[PKT-SP-MGCP-IO9-040113] Packetcable Network-Based Call Signaling [PKT-SP-MGCP-IO9-040113] Packetcable Network-Based Call Signaling
Protocol Specification PKT-SP-EC-MGCP- Protocol Specification PKT-SP-EC-MGCP-
IO9-040113. IO9-040113.
PacketCable/IPCablecom NCS Signaling MIB July 2004
[PKT-SP-PROV-IO8-040113] Packetcable MTA Device Provisioning [PKT-SP-PROV-IO8-040113] Packetcable MTA Device Provisioning
Specification PKT-SP-PROV-IO8-040113. Specification PKT-SP-PROV-IO8-040113.
[PKT-SP-CODEC-IO5-040113] Packetcable Audio/Video Codecs [PKT-SP-CODEC-IO5-040113] Packetcable Audio/Video Codecs
Specification PKT-SP-CODEC-IO5-040113. Specification PKT-SP-CODEC-IO5-040113.
7. 7.
Informative References Informative References
[RFC3261] Rosenberg, J., Schulzrinne H., Camarillo, G., Johnston, [RFC3261] Rosenberg, J., Schulzrinne H., Camarillo, G., Johnston,
A., Peterson, J., Sparks, R., Handley, M., and Schooler, A., Peterson, J., Sparks, R., Handley, M., and Schooler,
E. "SIP: Session Initiation Protocol", RFC 3261, June E. "SIP: Session Initiation Protocol", RFC 3261, June
2002. 2002.
[RFC3410] Case, J., Mundy, R., Partain, D. and B. Stewart, [RFC3410] Case, J., Mundy, R., Partain, D. and B. Stewart,
"Introduction and Applicability Statements for Internet- "Introduction and Applicability Statements for Internet-
Standard Management Framework", RFC 3410, December 2002. Standard Management Framework", RFC 3410, December 2002.
PacketCable/IPCablecom NCS Signaling MIB February 2004
[RFC3435] Andreasen, F., Foster, B., "Media Gateway Control Protocol [RFC3435] Andreasen, F., Foster, B., "Media Gateway Control Protocol
(MGCP)", RFC 3435, January 2003. (MGCP)", RFC 3435, January 2003.
[PKT-SP-MIB-MTA-I08-040113] Packetcable MTA MIB Specification PKT- [PKT-SP-MIB-MTA-I08-040113] Packetcable MTA MIB Specification PKT-
SP-MIB-MTA-I08-040113. SP-MIB-MTA-I08-040113.
[ETSI TS 101 909-4] ETSI TS 101 909-4:"Access and Terminals (AT); [ETSI TS 101 909-4] ETSI TS 101 909-4:"Access and Terminals (AT);
Digital Broadband Cable Access to the Public Digital Broadband Cable Access to the Public
Telecommunications Network; IP Multimedia Time Telecommunications Network; IP Multimedia Time
Critical Services; Part 4: Network Call Critical Services; Part 4: Network Call
skipping to change at page 50, line 38 skipping to change at page 52, line 5
requirements for equipment connected to an analogue requirements for equipment connected to an analogue
subscriber interface in the PSTN; Chapter 3: Ringing subscriber interface in the PSTN; Chapter 3: Ringing
signal characteristics (national deviations are in signal characteristics (national deviations are in
Table 3.1.1)". Table 3.1.1)".
[EN 300 324-1] EN 300 324-1 V2.1.1 (2000-04):"V Interfaces at the [EN 300 324-1] EN 300 324-1 V2.1.1 (2000-04):"V Interfaces at the
digital Loop Exchange (LE); V5.1 interface for the digital Loop Exchange (LE); V5.1 interface for the
support of Access Network (AN); Part 1: V5.1 support of Access Network (AN); Part 1: V5.1
interface specification". interface specification".
PacketCable/IPCablecom NCS Signaling MIB July 2004
[EN 300 659-1] EN 300 659-1: "Public Switched Telephone Network [EN 300 659-1] EN 300 659-1: "Public Switched Telephone Network
(PSTN); Subscriber line protocol over the local loop (PSTN); Subscriber line protocol over the local loop
for display (and related) services; Part 1: On hook for display (and related) services; Part 1: On hook
data transmission". data transmission".
[ITU-T E.180] ITU-T: "Various Tones Used in National Networks, [ITU-T E.180] ITU-T: "Various Tones Used in National Networks,
Supplement 2 to Recommendation E.180". Supplement 2 to Recommendation E.180".
[TR 101 183] TR 101 183: "Public Switched Telephone Network (PSTN) [TR 101 183] TR 101 183: "Public Switched Telephone Network (PSTN)
Analogue Ringing Signals". Analogue Ringing Signals".
8. 8.
Security Considerations Security Considerations
There are a number of management objects defined in this MIB that There are a number of management objects defined in this MIB that
have a MAX-ACCESS clause of read-write and/or read-create. Such have a MAX-ACCESS clause of read-write and/or read-create. Such
objects may be considered sensitive or vulnerable in some network objects may be considered sensitive or vulnerable in some network
environments. The support for SET operations in a non-secure environments. The support for SET operations in a non-secure
PacketCable/IPCablecom NCS Signaling MIB February 2004
environment without proper protection can have a negative effect on environment without proper protection can have a negative effect on
network operations. network operations.
The following Differentiated Services Code Point (DSCP) and mask The following Differentiated Services Code Point (DSCP) and mask
objects are used to differentiate between various types of traffic objects are used to differentiate between various types of traffic
in the service provider network: in the service provider network:
pktcSigDefCallSigDscp pktcSigDefCallSigDscp
pktcSigDefMediaStreamDscp pktcSigDefMediaStreamDscp
skipping to change at page 51, line 39 skipping to change at page 53, line 4
pktcSigDevR0Cadence pktcSigDevR0Cadence
pktcSigDevR1Cadence pktcSigDevR1Cadence
pktcSigDevR2Cadence pktcSigDevR2Cadence
pktcSigDevR3Cadence pktcSigDevR3Cadence
pktcSigDevR4Cadence pktcSigDevR4Cadence
pktcSigDevR5Cadence pktcSigDevR5Cadence
pktcSigDevR6Cadence pktcSigDevR6Cadence
pktcSigDevR7Cadence pktcSigDevR7Cadence
pktcSigDevRgCadence pktcSigDevRgCadence
pktcSigDevRsCadence pktcSigDevRsCadence
PacketCable/IPCablecom NCS Signaling MIB July 2004
pktcSigDevCallerIdSigProtocol pktcSigDevCallerIdSigProtocol
pktcSigPulseSignalDuration pktcSigPulseSignalDuration
pktcSigPulseSignalPauseDuration pktcSigPulseSignalPauseDuration
If these objects are SET maliciously, it may result in unwanted If these objects are SET maliciously, it may result in unwanted
operation, or a failure to obtain telephony service from client operation, or a failure to obtain telephony service from client
(MTA) devices. (MTA) devices.
The objects in the pktcNcsEndPntConfigTable are used for end point The objects in the pktcNcsEndPntConfigTable are used for end point
signaling. The pktcNcsEndPntConfigCallAgentId object contains the signaling. The pktcNcsEndPntConfigCallAgentId object contains the
name of the call agent, which includes the call agent FQDN. If this name of the call agent, which includes the call agent FQDN. If this
object is SET maliciously, the MTA will not be able to communicate object is SET maliciously, the MTA will not be able to communicate
with the call agent, resulting in a disruption of telephony service. with the call agent, resulting in a disruption of telephony service.
The pktcNcsEndPntConfigCallAgentUdpPort object identifies the UDP The pktcNcsEndPntConfigCallAgentUdpPort object identifies the UDP
port for NCS signaling traffic. If this object is SET maliciously, port for NCS signaling traffic. If this object is SET maliciously,
the call agent will not receive NCS signaling traffic from the MTA, the call agent will not receive NCS signaling traffic from the MTA,
also resulting in a disruption of telephony service. also resulting in a disruption of telephony service.
PacketCable/IPCablecom NCS Signaling MIB February 2004
Some of the readable objects in this MIB module (i.e., objects with Some of the readable objects in this MIB module (i.e., objects with
a MAX-ACCESS other than not-accessible) may be considered sensitive a MAX-ACCESS other than not-accessible) may be considered sensitive
or vulnerable in some network environments. It is thus important to or vulnerable in some network environments. It is thus important to
control even GET and/or NOTIFY access to these objects and possibly control even GET and/or NOTIFY access to these objects and possibly
to even encrypt the values of these objects when sending them over to even encrypt the values of these objects when sending them over
the network via SNMP. The most sensitive is the network via SNMP. The most sensitive is
pktcNcsEndPntStatusCallIpAddress within pktcNcsEndPntConfigTable. pktcNcsEndPntStatusCallIpAddress within pktcNcsEndPntConfigTable.
This information itself may be valuable to would-be attackers. This information itself may be valuable to would-be attackers.
SNMP versions prior to SNMPv3 did not include adequate security. SNMP versions prior to SNMPv3 did not include adequate security.
skipping to change at page 52, line 38 skipping to change at page 54, line 5
RECOMMENDED. Instead, it is RECOMMENDED to deploy SNMPv3 and to RECOMMENDED. Instead, it is RECOMMENDED to deploy SNMPv3 and to
enable cryptographic security. It is then a customer/operator enable cryptographic security. It is then a customer/operator
responsibility to ensure that the SNMP entity giving access to an responsibility to ensure that the SNMP entity giving access to an
instance of this MIB module is properly configured to give access to instance of this MIB module is properly configured to give access to
the objects only to those principals (users) that have legitimate the objects only to those principals (users) that have legitimate
rights to indeed GET or SET (change/create/delete) them. rights to indeed GET or SET (change/create/delete) them.
9. 9.
IANA Considerations IANA Considerations
PacketCable/IPCablecom NCS Signaling MIB July 2004
No IANA actions are required by this document. No IANA actions are required by this document.
10. 10.
Intellectual Property Intellectual Property
The IETF takes no position regarding the validity or scope of any The IETF takes no position regarding the validity or scope of any
Intellectual Property Rights or other rights that might be claimed Intellectual Property Rights or other rights that might be claimed
to pertain to the implementation or use of the technology described to pertain to the implementation or use of the technology described
in this document or the extent to which any license under such in this document or the extent to which any license under such
rights might or might not be available; nor does it represent that rights might or might not be available; nor does it represent that
it has made any independent effort to identify any such rights. it has made any independent effort to identify any such rights.
Information on the procedures with respect to rights in RFC Information on the procedures with respect to rights in RFC
documents can be found in BCP 78 and BCP 79. documents can be found in BCP 78 and BCP 79.
Copies of IPR disclosures made to the IETF Secretariat and any Copies of IPR disclosures made to the IETF Secretariat and any
assurances of licenses to be made available, or the result of an assurances of licenses to be made available, or the result of an
attempt made to obtain a general license or permission for the use attempt made to obtain a general license or permission for the use
of such proprietary rights by implementers or users of this of such proprietary rights by implementers or users of this
PacketCable/IPCablecom NCS Signaling MIB February 2004
specification can be obtained from the IETF on-line IPR repository specification can be obtained from the IETF on-line IPR repository
at http://www.ietf.org/ipr. at http://www.ietf.org/ipr.
The IETF invites any interested party to bring to its attention any The IETF invites any interested party to bring to its attention any
copyrights, patents or patent applications, or other proprietary copyrights, patents or patent applications, or other proprietary
rights that may cover technology that may be required to implement rights that may cover technology that may be required to implement
this standard. Please address the information to the IETF at this standard. Please address the information to the IETF at
ipr@ietf.org. ipr@ietf.org.
11. 11.
skipping to change at page 53, line 40 skipping to change at page 55, line 4
Bangalore - 560 017, INDIA Bangalore - 560 017, INDIA
+91 80 5269451 +91 80 5269451
satish.kumar@ti.com satish.kumar@ti.com
Sumanth Channabasappa Sumanth Channabasappa
Alopa Networks Inc Alopa Networks Inc
248, McCaslin Bvld #101, 248, McCaslin Bvld #101,
Louisville, Colorado - 80027 Louisville, Colorado - 80027
U.S.A. U.S.A.
+1 303 604 6595 +1 303 604 6595
PacketCable/IPCablecom NCS Signaling MIB July 2004
Sumanth@alopa.com Sumanth@alopa.com
12. 12.
Full Copyright Statement Full Copyright Statement
Copyright (C) The Internet Society (2004). This document is subject Copyright (C) The Internet Society (2004). This document is subject
to the rights, licenses and restrictions contained in BCP 78, and to the rights, licenses and restrictions contained in BCP 78, and
except as set forth therein, the authors retain all their rights. except as set forth therein, the authors retain all their rights.
This document and the information contained herein are provided on This document and the information contained herein are provided on
 End of changes. 

This html diff was produced by rfcdiff 1.23, available from http://www.levkowetz.com/ietf/tools/rfcdiff/