draft-ietf-ipsp-ipsecpib-05.txt   draft-ietf-ipsp-ipsecpib-06.txt 
ipsp working group Man Li ipsp working group Man Li
Internet Draft Nokia Internet Draft Nokia
Expires February 2003 David Arneson Expires June 2003 David Arneson
N/A N/A
Avri Doria Avri Doria
LTU LTU
Jamie Jason Jamie Jason
Intel Intel
Cliff Wang Cliff Wang
SmartPipe SmartPipe
Markus Stenberg Markus Stenberg
SSH SSH
August 2002 November 2002
IPsec Policy Information Base IPsec Policy Information Base
draft-ietf-ipsp-ipsecpib-05.txt draft-ietf-ipsp-ipsecpib-06.txt
Status of this Memo Status of this Memo
This document is an Internet-Draft and is in full conformance with This document is an Internet-Draft and is in full conformance with
all provisions of Section 10 of RFC2026 [1]. all provisions of Section 10 of RFC2026 [1].
Internet-Drafts are working documents of the Internet Engineering Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF), its areas, and its working groups. Note that Task Force (IETF), its areas, and its working groups. Note that
other groups may also distribute working documents as Internet- other groups may also distribute working documents as Internet-
Drafts. Internet-Drafts are draft documents valid for a maximum of Drafts. Internet-Drafts are draft documents valid for a maximum of
skipping to change at line 52 skipping to change at line 52
configuring IPsec policy at IPsec-enabled devices (e.g., security configuring IPsec policy at IPsec-enabled devices (e.g., security
gateways). Instances of these classes reside in a virtual gateways). Instances of these classes reside in a virtual
information store called the IPsec Policy Information Base (PIB). information store called the IPsec Policy Information Base (PIB).
The COPS protocol [5] with extensions for provisioning [6] is used The COPS protocol [5] with extensions for provisioning [6] is used
to transmit this IPsec policy information to IPsec-enabled to transmit this IPsec policy information to IPsec-enabled
devices. The PRCs defined in this IPsec PIB are intended for use devices. The PRCs defined in this IPsec PIB are intended for use
by the COPS-PR IPsec client type. These PRCs are in addition to by the COPS-PR IPsec client type. These PRCs are in addition to
any other PIBs that may be defined for the IPsec client type, as any other PIBs that may be defined for the IPsec client type, as
well as the PRCs defined in the Framework PIB [9]. well as the PRCs defined in the Framework PIB [9].
Li, et al Expires February, 2003 1 Li, et al Expires June 2003 1
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
Conventions used in this document Conventions used in this document
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL
NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and
"OPTIONAL" in this document are to be interpreted as described in "OPTIONAL" in this document are to be interpreted as described in
RFC-2119 [2]. RFC-2119 [2].
1. Introduction 1. Introduction
The policy rule classes (PRC) defined in this document contain The policy rule classes (PRC) defined in this document contain
parameters for IKE phase one and phase two negotiations. Details parameters for IKE phase one and phase two negotiations. Details
of these parameters can be found in [3], [7], [8], [10], [11], of these parameters can be found in [3], [7], [8], [10], [11],
[12] and [14]. The PIB defined in this document is based on the [12] and [14]. The PIB defined in this document is based on the
IPsec configuration policy model [12]. The rule and role approach IPsec configuration policy model [12]. The concept of "Roles"
proposed in [13], which scales to large networks, is adopted for described in [9], which scales to large networks, is adopted for
distributing IPsec policy over the COPS-PR protocol [6]. distributing IPsec policy over the COPS-PR protocol [6].
2. Operation Overview 2. Operation Overview
Following the policy framework convention [13], the management As defined in [13], the management entity that downloads policy to
entity that downloads policy to IPsec-enabled devices will be IPsec-enabled devices will be called a Policy Decision Point (PDP)
called a Policy Decision Point (PDP) and the target IPsec-enabled and the target IPsec-enabled devices will be called Policy
devices will be called Policy Enforcement Points (PEP). Enforcement Points (PEP).
After connecting to a PDP using COPS-PR, a PEP reports to the PDP After connecting to a PDP using COPS-PR, a PEP reports to the PDP
the PIB Provisioning Classes (PRCs) it supports as well as any the PIB Provisioning Classes (PRCs) it supports as well as any
limitations related to the implementations of theses classes and limitations related to the implementations of theses classes and
parameters. The PEP provides the above information using the parameters. The PEP provides the above information using the
frwkPrcSupportTable and the frwkCompLimitsTable defined in the frwkPrcSupportTable and the frwkCompLimitsTable defined in the
framework PIB [9]. In addition, the PEP also reports the interface framework PIB [9]. In addition, the PEP also reports the interface
type capabilities and role combinations it supports using the type capabilities and role combinations it supports using the
frwkIfCapSetTable and the frwkIfCapSetRoleComboTable. Each row of frwkCapabilitySetTable and the frwkRoleComboTable. Each row of the
the frwkIfCapSetTable contains a capability set name and a frwkCapabilitySetTable contains a capability set name and a
reference to an instance of a PRC that describes the capabilities reference to an instance of a PRC that describes the capabilities
of the interface type. The capability instances may reside in the of the interface type. The capability instances may reside in the
ipSecIfCapsTable or in a table defined in another PIB. Each row of ipSecIfCapsTable or in a table defined in another PIB. Each row of
the frwkIfCapSetRoleComboTable contains an interface capability the frwkRoleComboTable contains an interface capability set name
set name and a role combination. and a role combination.
Based on the interface capabilities and role combinations, the PDP Based on the interface capabilities and role combinations, the PDP
provides the PEP with IPsec policy information. Later on, if any provides the PEP with IPsec policy information. Later on, if any
of the interface capabilities or role combinations of the PEP of the interface capabilities or role combinations of the PEP
change, the PEP notifies the PDP. The PDP will then send a new set change, the PEP notifies the PDP. The PDP will then send a new set
of IPsec policy information to the PEP. In addition, if the policy of IPsec policy information to the PEP. In addition, if the policy
associated with a given interface capability and role combination associated with a given interface capability and role combination
changes, the PDP will deliver the new IPsec policy to all the PEPs changes, the PDP will deliver the new IPsec policy to all the PEPs
that have registered with that interface capability and role that have registered with that interface capability and role
combination. combination.
Li, et al Expires February, 2003 2 Li, et al Expires June 2003 2
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
3. Structure of IPsec PIB 3. Structure of IPsec PIB
An IPsec policy consists of an ordered list of IPsec rules. Each An IPsec policy consists of an ordered list of IPsec rules. Each
rule is composed of a set of conditions and a set of actions. If a rule is composed of a set of conditions and a set of actions. If a
packet matches any of the conditions, the actions will be applied packet matches any of the conditions, the actions will be applied
accordingly. accordingly.
The IPsec PIB module consists of nine groups. The selector group The IPsec PIB module consists of nine groups. The selector group
describes conditions to be associated with IPsec rules. The IPsec describes conditions to be associated with IPsec rules. The IPsec
skipping to change at line 149 skipping to change at line 147
filters to indicate the conditions associated with this rule. In filters to indicate the conditions associated with this rule. In
addition, each rule has a pointer to a set of actions to indicate addition, each rule has a pointer to a set of actions to indicate
the actions associated with this rule. Hence if a packet matches a the actions associated with this rule. Hence if a packet matches a
selector in the selector set and, if the reference to the IPSO selector in the selector set and, if the reference to the IPSO
filter set is not zero, it matches a filter in the IPSO filter filter set is not zero, it matches a filter in the IPSO filter
set, the action(s) associated with this rule will be applied to set, the action(s) associated with this rule will be applied to
the packet. the packet.
When a rule involves multiple actions, the ExecutionStrategy When a rule involves multiple actions, the ExecutionStrategy
attribute indicates how these actions are executed. A value of attribute indicates how these actions are executed. A value of
˘DoAll÷ means that all the actions MUST be applied to the packet "DoAll" means that all the actions MUST be applied to the packet
according to a predefined order. A value of ˘DoUntilSuccess÷ means according to a predefined order. A value of "DoUntilSuccess" means
that the actions MUST be tried in sequence until a successful that the actions MUST be tried in sequence until a successful
execution of a single action. execution of a single action.
For example, in a nested Security Associations case the actions of For example, in a nested Security Associations case the actions of
an initiator's rule might be structured as: an initiator's rule might be structured as:
ExecutionStrategy='Do All' ExecutionStrategy='Do All'
| |
+---1--- IPsecTunnelAction // set up SA from host to gateway +---1--- IPsecTunnelAction // set up SA from host to gateway
| |
+---2--- IPsecTransportAction // set up SA from host through +---2--- IPsecTransportAction // set up SA from host through
Li, et al Expires February, 2003 3 Li, et al Expires June 2003 3
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
// tunnel to remote host // tunnel to remote host
Another example, showing a rule with fallback actions might be Another example, showing a rule with fallback actions might be
structured as: structured as:
ExecutionStrategy='Do Until Success' ExecutionStrategy='Do Until Success'
| |
+---1--- IPsecTunnelAction // set up SA from host to gateway [A] +---1--- IPsecTunnelAction // set up SA from host to gateway [A]
| |
skipping to change at line 220 skipping to change at line 217
instance of a PRC defined in some other PIB module. instance of a PRC defined in some other PIB module.
The ipSecActionSetTable specifies sets of actions. Actions within The ipSecActionSetTable specifies sets of actions. Actions within
a set form an ordered list. If an action within a set is a Static a set form an ordered list. If an action within a set is a Static
Action, the ActionId MUST point to a valid instance in the Action, the ActionId MUST point to a valid instance in the
ipSecStaticActionTable. If the action is a Negotiation Action, the ipSecStaticActionTable. If the action is a Negotiation Action, the
ActionId MUST point to a valid instance in the ActionId MUST point to a valid instance in the
ipSecNegotiationActionTable. For other actions, the ActionId MAY ipSecNegotiationActionTable. For other actions, the ActionId MAY
point to an instance of a PRC defined in some other PIB module. point to an instance of a PRC defined in some other PIB module.
Li, et al Expires February, 2003 4 Li, et al Expires June 2003 4
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
3.1.3 IPsec associations 3.1.3 IPsec associations
The ipSecAssociationTable specifies attributes associated with The ipSecAssociationTable specifies attributes associated with
IPsec associations. For each association, it points to a set of IPsec associations. For each association, it points to a set of
proposals in the ipSecProposalSetTable that is associated with proposals in the ipSecProposalSetTable that is associated with
this association. this association.
The MinLifetimeSeconds and MinLifetimeKilobytes in the The MinLifetimeSeconds and MinLifetimeKilobytes in the
ipSecAssociationTable indicate the lifetime to propose for the ipSecAssociationTable indicate the lifetime to propose for the
skipping to change at line 277 skipping to change at line 273
3.5 IKE association group 3.5 IKE association group
This group specifies rules associated with IKE phase one This group specifies rules associated with IKE phase one
negotiation. negotiation.
The ipSecIkeRuleTable and the ipSecIkeActionSetTable are optional The ipSecIkeRuleTable and the ipSecIkeActionSetTable are optional
tables. Support of these tables is required only when a policy tables. Support of these tables is required only when a policy
contains: contains:
Li, et al Expires February, 2003 5 Li, et al Expires June 2003 5
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
- Multiple IKE phase one actions (e.g., with different exchange - Multiple IKE phase one actions (e.g., with different exchange
modes) that are associated with one IPsec association. These modes) that are associated with one IPsec association. These
actions are to be tried in sequence till one success. actions are to be tried in sequence till one success.
- IKE phase one actions that start automatically. - IKE phase one actions that start automatically.
For the latter case, IKE rules may be distributed independently For the latter case, IKE rules may be distributed independently
and the IfName and Roles attributes in the ipSecIkeRuleTable and the IfName and Roles attributes in the ipSecIkeRuleTable
indicate the interface type and role combinations to which this indicate the interface type and role combinations to which this
skipping to change at line 334 skipping to change at line 329
3.6 Credential group 3.6 Credential group
This group specifies credentials to be used for IKE phase one This group specifies credentials to be used for IKE phase one
negotiations. negotiations.
The ipSecCredentialSetTable specifies sets of credentials. The The ipSecCredentialSetTable specifies sets of credentials. The
ipSecCredentialTable and ipSecCredentialFieldsTable together ipSecCredentialTable and ipSecCredentialFieldsTable together
specify credentials. Each credential may contain multiple sub- specify credentials. Each credential may contain multiple sub-
Li, et al Expires February, 2003 6 Li, et al Expires June 2003 6
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
fields. For example, a certificate may contain a unique serial fields. For example, a certificate may contain a unique serial
number sub-field and an issuer name sub-field, etc. The number sub-field and an issuer name sub-field, etc. The
ipSecCredentialFieldsTable defines the sub-fields and their values ipSecCredentialFieldsTable defines the sub-fields and their values
that MUST be matched against. The ipSecCredentialTable points to a that MUST be matched against. The ipSecCredentialTable points to a
set of criteria defined in the ipSecCredentialFieldsTable. The set of criteria defined in the ipSecCredentialFieldsTable. The
criteria MUST all be satisfied in order for a credential to be criteria MUST all be satisfied in order for a credential to be
considered as acceptable. Certificates may also be revoked. The considered as acceptable. Certificates may also be revoked. The
CrlDistributionPoint attribute in the ipSecCredentialTable CrlDistributionPoint attribute in the ipSecCredentialTable
indicates the Certificate Revocation List (CRL) distribution point indicates the Certificate Revocation List (CRL) distribution point
skipping to change at line 390 skipping to change at line 384
5. Construct all the possible combinations of the above four 5. Construct all the possible combinations of the above four
fields. Then add to the combinations the ipSecSelectorProtocol, fields. Then add to the combinations the ipSecSelectorProtocol,
ipSecSelectorDscp and ipSecSelectorFlowLabel attributes to form ipSecSelectorDscp and ipSecSelectorFlowLabel attributes to form
the list of selectors. the list of selectors.
Selectors constructed from a single row have the same order within Selectors constructed from a single row have the same order within
a selector set. The order is indicated by the Order attribute of a selector set. The order is indicated by the Order attribute of
the ipSecSelectorSetTable. The relative order among selectors the ipSecSelectorSetTable. The relative order among selectors
Li, et al Expires February, 2003 7 Li, et al Expires June 2003 7
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
constructed from a single row is unspecified. This is not an issue constructed from a single row is unspecified. This is not an issue
as long as these selectors are not over-lapping. as long as these selectors are not over-lapping.
The use of references in the ipSecSelectorTable instead of real IP The use of references in the ipSecSelectorTable instead of real IP
addresses and port numbers reduces the number of bytes being addresses and port numbers reduces the number of bytes being
pushed down to the PEP. Grouping of IP addresses and layer 4 ports pushed down to the PEP. Grouping of IP addresses and layer 4 ports
serves the same purpose. serves the same purpose.
The ipSecIpsoFilterSetTable specifies sets of IPSO filters. The ipSecIpsoFilterSetTable specifies sets of IPSO filters.
skipping to change at line 448 skipping to change at line 441
Specifies IPsec static actions. Specifies IPsec static actions.
4.1.4 ipSecNegotiationActionTable 4.1.4 ipSecNegotiationActionTable
Specifies IPsec negotiation actions. Specifies IPsec negotiation actions.
4.1.5 ipSecAssociationTable 4.1.5 ipSecAssociationTable
Specifies IPsec associations. Specifies IPsec associations.
4.1.6 ipSecProposalSetTable 4.1.6 ipSecProposalSetTable
Li, et al Expires February, 2003 8 Li, et al Expires June 2003 8
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
Specifies IPsec proposal sets. Specifies IPsec proposal sets.
4.1.7 ipSecProposalTable 4.1.7 ipSecProposalTable
Specifies IPsec proposals. Specifies IPsec proposals.
4.2 ipSecAhTransform group 4.2 ipSecAhTransform group
This group specifies AH Transforms. This group specifies AH Transforms.
4.2.1 ipSecAhTransformSetTable 4.2.1 ipSecAhTransformSetTable
skipping to change at line 505 skipping to change at line 497
4.5.4 ipSecIkeProposalSetTable 4.5.4 ipSecIkeProposalSetTable
Specifies IKE proposal sets. Specifies IKE proposal sets.
4.5.5 ipSecIkeProposalTable 4.5.5 ipSecIkeProposalTable
Specifies IKE proposals. Specifies IKE proposals.
4.5.6 ipSecIkePeerEndpointTable 4.5.6 ipSecIkePeerEndpointTable
Specifies IKE peer endpoints. Specifies IKE peer endpoints.
Li, et al Expires February, 2003 9 Li, et al Expires June 2003 9
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
4.6 ipSecCredential group 4.6 ipSecCredential group
This group specifies credentials for IKE phase one negotiations. This group specifies credentials for IKE phase one negotiations.
4.6.1 ipSecCredentialSetTable 4.6.1 ipSecCredentialSetTable
Specifies credential sets. Specifies credential sets.
4.6.2 ipSecCredentialTable 4.6.2 ipSecCredentialTable
Specifies credentials. Specifies credentials.
skipping to change at line 562 skipping to change at line 553
4.9 ipSecIfCapability group 4.9 ipSecIfCapability group
This group specifies capabilities associated with interface types. This group specifies capabilities associated with interface types.
4.9.1 ipSecIfCapsTable 4.9.1 ipSecIfCapsTable
Specifies capabilities that may be associated with an interface of Specifies capabilities that may be associated with an interface of
a specific type. a specific type.
4.10 ipSecPolicyPibConformance group 4.10 ipSecPolicyPibConformance group
Li, et al Expires February, 2003 10 Li, et al Expires June 2003 10
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
This group specifies requirements for conformance to the IPsec This group specifies requirements for conformance to the IPsec
Policy PIB. Policy PIB.
5. The IPsec PIB Module 5. The IPsec PIB Module
IPSEC-POLICY-PIB PIB-DEFINITIONS ::= BEGIN IPSEC-POLICY-PIB PIB-DEFINITIONS ::= BEGIN
IMPORTS IMPORTS
Unsigned32, MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY, Unsigned32, MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY,
TEXTUAL-CONVENTION, MODULE-COMPLIANCE, OBJECT-GROUP TEXTUAL-CONVENTION, MODULE-COMPLIANCE, OBJECT-GROUP, pib,
Unsigned64
FROM COPS-PR-SPPI FROM COPS-PR-SPPI
TruthValue TruthValue
FROM SNMPv2-TC FROM SNMPv2-TC
InstanceId, ReferenceId, TagId, TagReferenceId InstanceId, ReferenceId, TagId, TagReferenceId, Prid
FROM COPS-PR-SPPI FROM COPS-PR-SPPI-TC
SnmpAdminString
FROM SNMP-FRAMEWORK-MIB
RoleCombination RoleCombination
FROM FRAMEWORK-TC-PIB; FROM FRAMEWORK-TC-PIB;
ipSecPolicyPib MODULE-IDENTITY ipSecPolicyPib MODULE-IDENTITY
SUBJECT-CATEGORIES { tbd } -- IPsec Client Type -- SUBJECT-CATEGORIES { tbd } -- IPsec Client Type --
LAST-UPDATED "200202241800Z" LAST-UPDATED "200211141800Z"
ORGANIZATION "IETF ipsp WG" ORGANIZATION "IETF ipsp WG"
CONTACT-INFO " CONTACT-INFO "
Man Li Man Li
Nokia Nokia
5 Wayside Road, 5 Wayside Road,
Burlington, MA 01803 Burlington, MA 01803
Phone: +1 781 993 3923 Phone: +1 781 993 3923
Email: man.m.li@nokia.com Email: man.m.li@nokia.com
Avri Doria Avri Doria
skipping to change at line 616 skipping to change at line 609
MS JF3-206 MS JF3-206
2111 NE 25th Ave. 2111 NE 25th Ave.
Hillsboro, OR 97124 Hillsboro, OR 97124
Phone: +1 503 264 9531 Phone: +1 503 264 9531
Fax: +1 503 264 9428 Fax: +1 503 264 9428
Email: jamie.jason@intel.com Email: jamie.jason@intel.com
Cliff Wang Cliff Wang
SmartPipes Inc. SmartPipes Inc.
Suite 300, 565 Metro Place South Suite 300, 565 Metro Place South
Dublin, OH 43017
Phone: +1 614 923 6241
Li, et al Expires February, 2003 11 Li, et al Expires June 2003 11
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
Dublin, OH 43017
Phone: +1 614 923 6241
Email: CWang@smartpipes.com Email: CWang@smartpipes.com
Markus Stenberg Markus Stenberg
SSH Communications Security Corp. SSH Communications Security Corp.
Fredrikinkatu 42 Fredrikinkatu 42
FIN-00100 Helsinki, Finland FIN-00100 Helsinki, Finland
Phone: +358 20 500 7466 Phone: +358 20 500 7466
Email: markus.stenberg@ssh.com" Email: fingon@iki.fi"
DESCRIPTION DESCRIPTION
"This PIB module contains a set of policy rule classes that "This PIB module contains a set of policy rule classes that
describe IPsec policies." describe IPsec policies.
::= { pib yyy } ű- yyy to be assigned by IANA --
Copyright (C) The Internet Society (year). This version of
this PIB module is part of RFC xxxx; see the RFC itself for
full legal notices."
::= { pib yyy } -- yyy to be assigned by IANA --
Unsigned16 ::= TEXTUAL-CONVENTION Unsigned16 ::= TEXTUAL-CONVENTION
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An unsigned 16 bit integer." "An unsigned 16 bit integer."
SYNTAX Unsigned32 (0..65535) SYNTAX Unsigned32 (0..65535)
ipSecAssociation OBJECT-IDENTITY ipSecAssociation OBJECT-IDENTITY
STATUS current STATUS current
DESCRIPTION DESCRIPTION
skipping to change at line 673 skipping to change at line 669
DESCRIPTION DESCRIPTION
"This group specifies Comp Transforms." "This group specifies Comp Transforms."
::= { ipSecPolicyPib 4 } ::= { ipSecPolicyPib 4 }
ipSecIkeAssociation OBJECT-IDENTITY ipSecIkeAssociation OBJECT-IDENTITY
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This group specifies IKE Security Associations." "This group specifies IKE Security Associations."
::= { ipSecPolicyPib 5 } ::= { ipSecPolicyPib 5 }
ipSecCredential OBJECT-IDENTITY Li, et al Expires June 2003 12
IPsec Policy Information Base November 2002
Li, et al Expires February, 2003 12
IPsec Policy Information Base August, 2002
ipSecCredential OBJECT-IDENTITY
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This group specifies credentials for IKE phase one negotiations." "This group specifies credentials for IKE phase one negotiations."
::= { ipSecPolicyPib 6 } ::= { ipSecPolicyPib 6 }
ipSecSelector OBJECT-IDENTITY ipSecSelector OBJECT-IDENTITY
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This group specifies selectors for IPsec associations." "This group specifies selectors for IPsec associations."
::= { ipSecPolicyPib 7 } ::= { ipSecPolicyPib 7 }
skipping to change at line 729 skipping to change at line 723
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This table is the starting point for specifying an IPsec policy. "This table is the starting point for specifying an IPsec policy.
It contains an ordered list of IPsec rules. " It contains an ordered list of IPsec rules. "
::= { ipSecAssociation 1 } ::= { ipSecAssociation 1 }
ipSecRuleEntry OBJECT-TYPE ipSecRuleEntry OBJECT-TYPE
SYNTAX IpSecRuleEntry SYNTAX IpSecRuleEntry
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Specifies an instance of this class"
PIB-INDEX { ipSecRulePrid }
Li, et al Expires February, 2003 13
IPsec Policy Information Base August, 2002 Li, et al Expires June 2003 13
IPsec Policy Information Base November 2002
"Specifies an instance of this class"
PIB-INDEX { ipSecRulePrid }
UNIQUENESS { UNIQUENESS {
ipSecRuleIfName, ipSecRuleIfName,
ipSecRuleRoles, ipSecRuleRoles,
ipSecRuleOrder ipSecRuleOrder
} }
::= { ipSecRuleTable 1 } ::= { ipSecRuleTable 1 }
IpSecRuleEntry ::= SEQUENCE { IpSecRuleEntry ::= SEQUENCE {
ipSecRulePrid InstanceId, ipSecRulePrid InstanceId,
ipSecRuleIfName SnmpAdminString, ipSecRuleIfName SnmpAdminString,
ipSecRuleRoles RoleCombination, ipSecRuleRoles RoleCombination,
ipSecRuleDirection INTEGER, ipSecRuleDirection INTEGER,
ipSecRuleIpSecSelectorSetId TagReferenceId, ipSecRuleIpSecSelectorSetId TagReferenceId,
ipSecRuleipSecIpsoFilterSetId TagReferenceId, ipSecRuleIpSecIpsoFilterSetId TagReferenceId,
ipSecRuleIpSecActionSetId TagReferenceId, ipSecRuleIpSecActionSetId TagReferenceId,
ipSecRuleActionExecutionStrategy INTEGER, ipSecRuleActionExecutionStrategy INTEGER,
ipSecRuleOrder Unsigned16, ipSecRuleOrder Unsigned16,
ipSecRuleLimitNegotiation INTEGER, ipSecRuleLimitNegotiation INTEGER,
ipSecRuleAutoStart TruthValue, ipSecRuleAutoStart TruthValue,
ipSecRuleIpSecRuleTimePeriodGroupId TagReferenceId ipSecRuleIpSecRuleTimePeriodGroupId TagReferenceId
} }
ipSecRulePrid OBJECT-TYPE ipSecRulePrid OBJECT-TYPE
SYNTAX InstanceId SYNTAX InstanceId
skipping to change at line 772 skipping to change at line 765
"An integer index that uniquely identifies an instance of this "An integer index that uniquely identifies an instance of this
class." class."
::= { ipSecRuleEntry 1 } ::= { ipSecRuleEntry 1 }
ipSecRuleIfName OBJECT-TYPE ipSecRuleIfName OBJECT-TYPE
SYNTAX SnmpAdminString SYNTAX SnmpAdminString
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The interface capability set to which this IPsec rule applies. "The interface capability set to which this IPsec rule applies.
The interface capability name specified by this attribute MUST The interface capability name specified by this attribute MUST
exist in the frwkIfCapSetTable [FR-PIB] prior to association with exist in the frwkCapabilitySetTable [9] prior to association with
an instance of this class." an instance of this class."
::= { ipSecRuleEntry 2 } ::= { ipSecRuleEntry 2 }
ipSecRuleRoles OBJECT-TYPE ipSecRuleRoles OBJECT-TYPE
SYNTAX RoleCombination SYNTAX RoleCombination
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Specifies the role combination of the interface to which this "Specifies the role combination of the interface to which this
IPsec rule should apply. There must exist an instance in the IPsec rule should apply. There must exist an instance in the
frwkIfCapSetRoleComboTable [FR-PIB] specifying this role frwkRoleComboTable [9] specifying this role combination, together
combination, together with the interface capability set specified with the interface capability set specified by ipSecRuleIfName,
by ipSecRuleIfName, prior to association with an instance of this prior to association with an instance of this class."
class."
::= { ipSecRuleEntry 3 } ::= { ipSecRuleEntry 3 }
ipSecRuleDirection OBJECT-TYPE Li, et al Expires June 2003 14
IPsec Policy Information Base November 2002
Li, et al Expires February, 2003 14
IPsec Policy Information Base August, 2002
ipSecRuleDirection OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
in(1), in(1),
out(2), out(2),
bi-directional(3) bi-directional(3)
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Specifies the direction of traffic to which this rule should "Specifies the direction of traffic to which this rule should
apply." apply."
::= { ipSecRuleEntry 4 } ::= { ipSecRuleEntry 4 }
ipSecRuleIpSecSelectorSetId OBJECT-TYPE ipSecRuleIpSecSelectorSetId OBJECT-TYPE
SYNTAX TagReferenceId SYNTAX TagReferenceId
PIB-TAG { ipSecSelectorSetSelectorSetId } PIB-TAG { ipSecSelectorSetSelectorSetId }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Identifies a set of selectors to be associated with this IPsec "Identifies a set of selectors to be associated with this IPsec
rule. " rule. "
::= { ipSecRuleEntry 5 } ::= { ipSecRuleEntry 5 }
ipSecRuleipSecIpsoFilterSetId OBJECT-TYPE ipSecRuleIpSecIpsoFilterSetId OBJECT-TYPE
SYNTAX TagReferenceId SYNTAX TagReferenceId
PIB-TAG { ipSecIpsoFilterSetFilterSetId } PIB-TAG { ipSecIpsoFilterSetFilterSetId }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Identifies a set of IPSO filters to be associated with this IPsec "Identifies a set of IPSO filters to be associated with this IPsec
rule. A value of zero indicates that there are no IPSO filters rule. A value of zero indicates that there are no IPSO filters
associated with this rule. associated with this rule.
When the value of this attribute is not zero, the set of IPSO When the value of this attribute is not zero, the set of IPSO
filters is ANDed with the set of Selectors specified by filters is ANDed with the set of Selectors specified by
skipping to change at line 847 skipping to change at line 837
::= { ipSecRuleEntry 7 } ::= { ipSecRuleEntry 7 }
ipSecRuleActionExecutionStrategy OBJECT-TYPE ipSecRuleActionExecutionStrategy OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
doAll(1), doAll(1),
doUntilSuccess(2) doUntilSuccess(2)
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
Li, et al Expires February, 2003 15 Li, et al Expires June 2003 15
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
"Specifies the strategy to be used in executing the sequenced "Specifies the strategy to be used in executing the sequenced
actions in the action set identified by ipSecRuleIpSecActionSetId. actions in the action set identified by ipSecRuleIpSecActionSetId.
DoAll (1) causes the execution of all the actions in the action DoAll (1) causes the execution of all the actions in the action
set according to their defined precedence order. The precedence set according to their defined precedence order. The precedence
order is specified by the ipSecActionSetOrder in the order is specified by the ipSecActionSetOrder in the
ipSecActionSetTable. ipSecActionSetTable.
DoUntilSuccess (2) causes the execution of actions according to DoUntilSuccess (2) causes the execution of actions according to
skipping to change at line 905 skipping to change at line 894
ipSecRuleAutoStart OBJECT-TYPE ipSecRuleAutoStart OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates if this rule should be automatically executed." "Indicates if this rule should be automatically executed."
::= { ipSecRuleEntry 11 } ::= { ipSecRuleEntry 11 }
ipSecRuleIpSecRuleTimePeriodGroupId OBJECT-TYPE ipSecRuleIpSecRuleTimePeriodGroupId OBJECT-TYPE
Li, et al Expires February, 2003 16 Li, et al Expires June 2003 16
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
SYNTAX TagReferenceId SYNTAX TagReferenceId
PIB-TAG { ipSecRuleTimePeriodSetRuleTimePeriodSetId } PIB-TAG { ipSecRuleTimePeriodSetRuleTimePeriodSetId }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Identifies an IPsec rule time period set, specified in "Identifies an IPsec rule time period set, specified in
ipSecRuleTimePeriodSetTable, that is associated with this rule. ipSecRuleTimePeriodSetTable, that is associated with this rule.
A value of zero indicates that this IPsec rule is always valid." A value of zero indicates that this IPsec rule is always valid."
::= { ipSecRuleEntry 12 } ::= { ipSecRuleEntry 12 }
skipping to change at line 961 skipping to change at line 949
ipSecActionSetDoActionLogging TruthValue, ipSecActionSetDoActionLogging TruthValue,
ipSecActionSetDoPacketLogging TruthValue, ipSecActionSetDoPacketLogging TruthValue,
ipSecActionSetOrder Unsigned16 ipSecActionSetOrder Unsigned16
} }
ipSecActionSetPrid OBJECT-TYPE ipSecActionSetPrid OBJECT-TYPE
SYNTAX InstanceId SYNTAX InstanceId
STATUS current STATUS current
DESCRIPTION DESCRIPTION
Li, et al Expires February, 2003 17 Li, et al Expires June 2003 17
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
"An integer index that uniquely identifies an instance of this "An integer index that uniquely identifies an instance of this
class." class."
::= { ipSecActionSetEntry 1 } ::= { ipSecActionSetEntry 1 }
ipSecActionSetActionSetId OBJECT-TYPE ipSecActionSetActionSetId OBJECT-TYPE
SYNTAX TagId SYNTAX TagId
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An IPsec action set is composed of one or more IPsec actions. "An IPsec action set is composed of one or more IPsec actions.
skipping to change at line 1019 skipping to change at line 1006
"Specifies whether to log when the resulting security association "Specifies whether to log when the resulting security association
is used to process a packet. For ipSecStaticActions, a log message is used to process a packet. For ipSecStaticActions, a log message
is to be generated when the IPsecBypass, IpsecDiscard or IKEReject is to be generated when the IPsecBypass, IpsecDiscard or IKEReject
actions are executed." actions are executed."
::= { ipSecActionSetEntry 5 } ::= { ipSecActionSetEntry 5 }
ipSecActionSetOrder OBJECT-TYPE ipSecActionSetOrder OBJECT-TYPE
SYNTAX Unsigned16 SYNTAX Unsigned16
STATUS current STATUS current
Li, et al Expires February, 2003 18 Li, et al Expires June 2003 18
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
DESCRIPTION DESCRIPTION
"Specifies the precedence order of the action within the action "Specifies the precedence order of the action within the action
set. An action with a smaller precedence order is to be applied set. An action with a smaller precedence order is to be applied
before one with a larger precedence order. " before one with a larger precedence order. "
::= { ipSecActionSetEntry 6 } ::= { ipSecActionSetEntry 6 }
-- --
-- --
-- The ipSecStaticActionTable -- The ipSecStaticActionTable
skipping to change at line 1066 skipping to change at line 1052
} }
::= { ipSecStaticActionTable 1 } ::= { ipSecStaticActionTable 1 }
IpSecStaticActionEntry ::= SEQUENCE { IpSecStaticActionEntry ::= SEQUENCE {
ipSecStaticActionPrid InstanceId, ipSecStaticActionPrid InstanceId,
ipSecStaticActionAction INTEGER, ipSecStaticActionAction INTEGER,
ipSecStaticActionTunnelEndpointId ReferenceId, ipSecStaticActionTunnelEndpointId ReferenceId,
ipSecStaticActionDfHandling INTEGER, ipSecStaticActionDfHandling INTEGER,
ipSecStaticActionSpi Unsigned32, ipSecStaticActionSpi Unsigned32,
ipSecStaticActionLifetimeSeconds Unsigned32, ipSecStaticActionLifetimeSeconds Unsigned32,
ipSecStaticActionLifetimeKilobytes Unsigned32, ipSecStaticActionLifetimeKilobytes Unsigned64,
ipSecStaticActionSaTransformId Prid ipSecStaticActionSaTransformId Prid
} }
ipSecStaticActionPrid OBJECT-TYPE ipSecStaticActionPrid OBJECT-TYPE
SYNTAX InstanceId SYNTAX InstanceId
STATUS current STATUS current
DESCRIPTION DESCRIPTION
Li, et al Expires February, 2003 19 Li, et al Expires June 2003 19
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
"An integer index that uniquely identifies an instance of this "An integer index that uniquely identifies an instance of this
class." class."
::= { ipSecStaticActionEntry 1 } ::= { ipSecStaticActionEntry 1 }
ipSecStaticActionAction OBJECT-TYPE ipSecStaticActionAction OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
byPass(1), byPass(1),
discard(2), discard(2),
ikeRejection(3), ikeRejection(3),
skipping to change at line 1131 skipping to change at line 1116
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"When ipSecStaticActionAction is preConfiguredTunnel, this "When ipSecStaticActionAction is preConfiguredTunnel, this
attribute specifies how the DF bit is managed. attribute specifies how the DF bit is managed.
Copy (1) indicates to copy the DF bit from the internal IP header Copy (1) indicates to copy the DF bit from the internal IP header
to the external IP header. Set (2) indicates to set the DF bit of to the external IP header. Set (2) indicates to set the DF bit of
the external IP header to 1. Clear (3) indicates to clear the DF the external IP header to 1. Clear (3) indicates to clear the DF
bit of the external IP header to 0. bit of the external IP header to 0.
Li, et al Expires February, 2003 20 Li, et al Expires June 2003 20
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
When ipSecStaticActionAction is not preConfiguredTunnel, this When ipSecStaticActionAction is not preConfiguredTunnel, this
attribute MUST be ignored. " attribute MUST be ignored. "
::= { ipSecStaticActionEntry 4 } ::= { ipSecStaticActionEntry 4 }
ipSecStaticActionSpi OBJECT-TYPE ipSecStaticActionSpi OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Specifies the SPI to be used with the SA Transform identified by "Specifies the SPI to be used with the SA Transform identified by
skipping to change at line 1171 skipping to change at line 1155
with this action (i.e., infinite lifetime). with this action (i.e., infinite lifetime).
The actual lifetime of the preconfigured SA will be the smallest The actual lifetime of the preconfigured SA will be the smallest
of the value of this LifetimeSeconds property and of the value of of the value of this LifetimeSeconds property and of the value of
the MaxLifetimeSeconds property of the associated SA Transform. the MaxLifetimeSeconds property of the associated SA Transform.
Except if the value of this LifetimeSeconds property is zero, then Except if the value of this LifetimeSeconds property is zero, then
there will be no lifetime associated to this SA." there will be no lifetime associated to this SA."
::= { ipSecStaticActionEntry 6 } ::= { ipSecStaticActionEntry 6 }
ipSecStaticActionLifetimeKilobytes OBJECT-TYPE ipSecStaticActionLifetimeKilobytes OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned64
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Specifies the SA lifetime in kilobytes. When "Specifies the SA lifetime in kilobytes. When
ipSecStaticActionAction is neither preConfiguredTransportAction ipSecStaticActionAction is neither preConfiguredTransportAction
nor preConfiguredTunnelAction, this attribute MUST be ignored. nor preConfiguredTunnelAction, this attribute MUST be ignored.
A value of zero indicates that there is not a lifetime associated A value of zero indicates that there is not a lifetime associated
with this action (i.e., infinite lifetime). with this action (i.e., infinite lifetime).
The actual lifetime of the preconfigured SA will be the smallest The actual lifetime of the preconfigured SA will be the smallest
of the value of this LifetimeKilobytes property and of the value of the value of this LifetimeKilobytes property and of the value
of the MaxLifetimeKilobytes property of the associated SA of the MaxLifetimeKilobytes property of the associated SA
transform. Except if the value of this LifetimeKilobytes property transform. Except if the value of this LifetimeKilobytes property
is zero, then there will be no lifetime associated with this is zero, then there will be no lifetime associated with this
action. action.
" "
Li, et al Expires February, 2003 21 Li, et al Expires June 2003 21
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
::= { ipSecStaticActionEntry 7 } ::= { ipSecStaticActionEntry 7 }
ipSecStaticActionSaTransformId OBJECT-TYPE ipSecStaticActionSaTransformId OBJECT-TYPE
SYNTAX Prid SYNTAX Prid
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A pointer to a valid instance in another table that describes an "A pointer to a valid instance in another table that describes an
SA transform, e.g, ipSecEspTransformTable, ipSecAhTransformTable." SA transform, e.g, ipSecEspTransformTable, ipSecAhTransformTable."
::= { ipSecStaticActionEntry 8 } ::= { ipSecStaticActionEntry 8 }
skipping to change at line 1245 skipping to change at line 1228
ipSecNegotiationActionDfHandling INTEGER, ipSecNegotiationActionDfHandling INTEGER,
ipSecNegotiationActionIpSecSecurityAssociationId ReferenceId, ipSecNegotiationActionIpSecSecurityAssociationId ReferenceId,
ipSecNegotiationActionKeyExchangeId Prid ipSecNegotiationActionKeyExchangeId Prid
} }
ipSecNegotiationActionPrid OBJECT-TYPE ipSecNegotiationActionPrid OBJECT-TYPE
SYNTAX InstanceId SYNTAX InstanceId
STATUS current STATUS current
DESCRIPTION DESCRIPTION
Li, et al Expires February, 2003 22 Li, et al Expires June 2003 22
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
"An integer index that uniquely identifies an instance of this "An integer index that uniquely identifies an instance of this
class." class."
::= { ipSecNegotiationActionEntry 1 } ::= { ipSecNegotiationActionEntry 1 }
ipSecNegotiationActionAction OBJECT-TYPE ipSecNegotiationActionAction OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
transport(1), transport(1),
tunnel(2) tunnel(2)
} }
skipping to change at line 1303 skipping to change at line 1285
to the external IP header. Set (2) indicates to set the DF bit of to the external IP header. Set (2) indicates to set the DF bit of
the external IP header to 1. Clear (3) indicates to clear the DF the external IP header to 1. Clear (3) indicates to clear the DF
bit of the external IP header to 0. bit of the external IP header to 0.
When ipSecActionAction is not tunnel, this attribute MUST be When ipSecActionAction is not tunnel, this attribute MUST be
ignored. " ignored. "
::= { ipSecNegotiationActionEntry 4 } ::= { ipSecNegotiationActionEntry 4 }
ipSecNegotiationActionIpSecSecurityAssociationId OBJECT-TYPE ipSecNegotiationActionIpSecSecurityAssociationId OBJECT-TYPE
Li, et al Expires February, 2003 23 Li, et al Expires June 2003 23
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
SYNTAX ReferenceId SYNTAX ReferenceId
PIB-REFERENCES {ipSecAssociationEntry } PIB-REFERENCES {ipSecAssociationEntry }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Pointer to a valid instance in the "Pointer to a valid instance in the
ipSecSecurityAssociationTable." ipSecSecurityAssociationTable."
::= { ipSecNegotiationActionEntry 5 } ::= { ipSecNegotiationActionEntry 5 }
ipSecNegotiationActionKeyExchangeId OBJECT-TYPE ipSecNegotiationActionKeyExchangeId OBJECT-TYPE
skipping to change at line 1360 skipping to change at line 1341
"Specifies an instance of this class" "Specifies an instance of this class"
PIB-INDEX { ipSecAssociationPrid } PIB-INDEX { ipSecAssociationPrid }
UNIQUENESS { UNIQUENESS {
ipSecAssociationMinLifetimeSeconds, ipSecAssociationMinLifetimeSeconds,
ipSecAssociationMinLifetimeKilobytes, ipSecAssociationMinLifetimeKilobytes,
ipSecAssociationIdleDurationSeconds, ipSecAssociationIdleDurationSeconds,
ipSecAssociationUsePfs, ipSecAssociationUsePfs,
ipSecAssociationVendorId, ipSecAssociationVendorId,
ipSecAssociationUseKeyExchangeGroup, ipSecAssociationUseKeyExchangeGroup,
Li, et al Expires February, 2003 24 Li, et al Expires June 2003 24
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
ipSecAssociationDhGroup, ipSecAssociationDhGroup,
ipSecAssociationGranularity, ipSecAssociationGranularity,
ipSecAssociationProposalSetId ipSecAssociationProposalSetId
} }
::= { ipSecAssociationTable 1 } ::= { ipSecAssociationTable 1 }
IpSecAssociationEntry ::= SEQUENCE { IpSecAssociationEntry ::= SEQUENCE {
ipSecAssociationPrid InstanceId, ipSecAssociationPrid InstanceId,
ipSecAssociationMinLifetimeSeconds Unsigned32, ipSecAssociationMinLifetimeSeconds Unsigned32,
ipSecAssociationMinLifetimeKilobytes Unsigned32, ipSecAssociationMinLifetimeKilobytes Unsigned64,
ipSecAssociationIdleDurationSeconds Unsigned32, ipSecAssociationIdleDurationSeconds Unsigned32,
ipSecAssociationUsePfs TruthValue, ipSecAssociationUsePfs TruthValue,
ipSecAssociationVendorId OCTET STRING, ipSecAssociationVendorId OCTET STRING,
ipSecAssociationUseKeyExchangeGroup TruthValue, ipSecAssociationUseKeyExchangeGroup TruthValue,
ipSecAssociationDhGroup Unsigned16, ipSecAssociationDhGroup Unsigned16,
ipSecAssociationGranularity INTEGER, ipSecAssociationGranularity INTEGER,
ipSecAssociationProposalSetId TagReferenceId ipSecAssociationProposalSetId TagReferenceId
} }
ipSecAssociationPrid OBJECT-TYPE ipSecAssociationPrid OBJECT-TYPE
skipping to change at line 1402 skipping to change at line 1382
SYNTAX Unsigned32 SYNTAX Unsigned32
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Specifies the minimum SA seconds lifetime that will be accepted "Specifies the minimum SA seconds lifetime that will be accepted
from a peer while negotiating an SA based upon this action. from a peer while negotiating an SA based upon this action.
A value of zero indicates that there is no minimum lifetime A value of zero indicates that there is no minimum lifetime
enforced." enforced."
::= { ipSecAssociationEntry 2 } ::= { ipSecAssociationEntry 2 }
ipSecAssociationMinLifetimeKilobytes OBJECT-TYPE ipSecAssociationMinLifetimeKilobytes OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned64
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Specifies the minimum kilobyte lifetime that will be accepted "Specifies the minimum kilobyte lifetime that will be accepted
from a negotiating peer while negotiating an SA based upon this from a negotiating peer while negotiating an SA based upon this
action. A value of zero indicates that there is no minimum action. A value of zero indicates that there is no minimum
lifetime enforced." lifetime enforced."
::= { ipSecAssociationEntry 3 } ::= { ipSecAssociationEntry 3 }
ipSecAssociationIdleDurationSeconds OBJECT-TYPE ipSecAssociationIdleDurationSeconds OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Specifies how long, in seconds, a security association may remain "Specifies how long, in seconds, a security association may remain
unused before it is deleted. unused before it is deleted.
Li, et al Expires February, 2003 25 Li, et al Expires June 2003 25
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
A value of zero indicates that idle detection should not be used A value of zero indicates that idle detection should not be used
for the security association (only the seconds and kilobyte for the security association (only the seconds and kilobyte
lifetimes will be used)." lifetimes will be used)."
::= { ipSecAssociationEntry 4 } ::= { ipSecAssociationEntry 4 }
ipSecAssociationUsePfs OBJECT-TYPE ipSecAssociationUsePfs OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
STATUS current STATUS current
DESCRIPTION DESCRIPTION
skipping to change at line 1475 skipping to change at line 1454
"Specifies the key exchange group to use for phase 2 when the "Specifies the key exchange group to use for phase 2 when the
property ipSecSecurityAssociationUsePfs is true and the property property ipSecSecurityAssociationUsePfs is true and the property
ipSecSecurityAssociationUseKeyExchangeGroup is false." ipSecSecurityAssociationUseKeyExchangeGroup is false."
::= { ipSecAssociationEntry 8 } ::= { ipSecAssociationEntry 8 }
ipSecAssociationGranularity OBJECT-TYPE ipSecAssociationGranularity OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
subnet(1), subnet(1),
address(2), address(2),
Li, et al Expires February, 2003 26 Li, et al Expires June 2003 26
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
protocol(3), protocol(3),
port(4) port(4)
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Specifies how the proposed selector for the security association "Specifies how the proposed selector for the security association
will be created. will be created.
A value of 1 (subnet) indicates that the source and destination A value of 1 (subnet) indicates that the source and destination
skipping to change at line 1532 skipping to change at line 1510
with preference order. " with preference order. "
::= { ipSecAssociation 6 } ::= { ipSecAssociation 6 }
ipSecProposalSetEntry OBJECT-TYPE ipSecProposalSetEntry OBJECT-TYPE
SYNTAX IpSecProposalSetEntry SYNTAX IpSecProposalSetEntry
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Specifies an instance of this class" "Specifies an instance of this class"
PIB-INDEX { ipSecProposalSetPrid } PIB-INDEX { ipSecProposalSetPrid }
Li, et al Expires February, 2003 27 Li, et al Expires June 2003 27
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
UNIQUENESS { UNIQUENESS {
ipSecProposalSetProposalSetId, ipSecProposalSetProposalSetId,
ipSecProposalSetProposalId, ipSecProposalSetProposalId,
ipSecProposalSetOrder ipSecProposalSetOrder
} }
::= { ipSecProposalSetTable 1 } ::= { ipSecProposalSetTable 1 }
IpSecProposalSetEntry ::= SEQUENCE { IpSecProposalSetEntry ::= SEQUENCE {
ipSecProposalSetPrid InstanceId, ipSecProposalSetPrid InstanceId,
skipping to change at line 1589 skipping to change at line 1566
"An integer that specifies the precedence order of the proposal "An integer that specifies the precedence order of the proposal
identified by ipSecProposalSetProposalId in a proposal set. The identified by ipSecProposalSetProposalId in a proposal set. The
proposal set is identified by ipSecProposalSetProposalSetId. proposal set is identified by ipSecProposalSetProposalSetId.
Proposals within a set are ORed with preference order. A smaller Proposals within a set are ORed with preference order. A smaller
integer value indicates a higher preference." integer value indicates a higher preference."
::= { ipSecProposalSetEntry 4 } ::= { ipSecProposalSetEntry 4 }
-- --
-- --
Li, et al Expires February, 2003 28 Li, et al Expires June 2003 28
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
-- The ipSecProposalTable -- The ipSecProposalTable
-- --
ipSecProposalTable OBJECT-TYPE ipSecProposalTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpSecProposalEntry SYNTAX SEQUENCE OF IpSecProposalEntry
PIB-ACCESS install PIB-ACCESS install
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Specifies IPsec proposals. It has references to ESP, AH and "Specifies IPsec proposals. It has references to ESP, AH and
skipping to change at line 1647 skipping to change at line 1623
PIB-TAG { ipSecEspTransformSetTransformSetId } PIB-TAG { ipSecEspTransformSetTransformSetId }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An integer that identifies a set of ESP transforms, specified in "An integer that identifies a set of ESP transforms, specified in
ipSecEspTransformSetTable, that is associated with this proposal." ipSecEspTransformSetTable, that is associated with this proposal."
::= { ipSecProposalEntry 2 } ::= { ipSecProposalEntry 2 }
ipSecProposalAhTransformSetId OBJECT-TYPE ipSecProposalAhTransformSetId OBJECT-TYPE
SYNTAX TagReferenceId SYNTAX TagReferenceId
Li, et al Expires February, 2003 29 Li, et al Expires June 2003 29
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
PIB-TAG { ipSecAhTransformSetTransformSetId } PIB-TAG { ipSecAhTransformSetTransformSetId }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An integer that identifies an AH transform set, specified in "An integer that identifies an AH transform set, specified in
ipSecAhTransformSetTable, that is associated with this proposal." ipSecAhTransformSetTable, that is associated with this proposal."
::= { ipSecProposalEntry 3 } ::= { ipSecProposalEntry 3 }
ipSecProposalCompTransformSetId OBJECT-TYPE ipSecProposalCompTransformSetId OBJECT-TYPE
SYNTAX TagReferenceId SYNTAX TagReferenceId
skipping to change at line 1704 skipping to change at line 1679
IpSecAhTransformSetEntry ::= SEQUENCE { IpSecAhTransformSetEntry ::= SEQUENCE {
ipSecAhTransformSetPrid InstanceId, ipSecAhTransformSetPrid InstanceId,
ipSecAhTransformSetTransformSetId TagId, ipSecAhTransformSetTransformSetId TagId,
ipSecAhTransformSetTransformId ReferenceId, ipSecAhTransformSetTransformId ReferenceId,
ipSecAhTransformSetOrder Unsigned16 ipSecAhTransformSetOrder Unsigned16
} }
ipSecAhTransformSetPrid OBJECT-TYPE ipSecAhTransformSetPrid OBJECT-TYPE
Li, et al Expires February, 2003 30 Li, et al Expires June 2003 30
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
SYNTAX InstanceId SYNTAX InstanceId
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An integer index that uniquely identifies an instance of this "An integer index that uniquely identifies an instance of this
class. " class. "
::= { ipSecAhTransformSetEntry 1 } ::= { ipSecAhTransformSetEntry 1 }
ipSecAhTransformSetTransformSetId OBJECT-TYPE ipSecAhTransformSetTransformSetId OBJECT-TYPE
SYNTAX TagId SYNTAX TagId
skipping to change at line 1761 skipping to change at line 1735
PIB-ACCESS install PIB-ACCESS install
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Specifies AH transforms." "Specifies AH transforms."
::= { ipSecAhTransform 2 } ::= { ipSecAhTransform 2 }
ipSecAhTransformEntry OBJECT-TYPE ipSecAhTransformEntry OBJECT-TYPE
SYNTAX IpSecAhTransformEntry SYNTAX IpSecAhTransformEntry
STATUS current STATUS current
Li, et al Expires February, 2003 31 Li, et al Expires June 2003 31
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
DESCRIPTION DESCRIPTION
"Specifies an instance of this class" "Specifies an instance of this class"
PIB-INDEX { ipSecAhTransformPrid } PIB-INDEX { ipSecAhTransformPrid }
UNIQUENESS { UNIQUENESS {
ipSecAhTransformTransformId, ipSecAhTransformTransformId,
ipSecAhTransformIntegrityKey, ipSecAhTransformIntegrityKey,
ipSecAhTransformUseReplayPrevention, ipSecAhTransformUseReplayPrevention,
ipSecAhTransformReplayPreventionWindowSize, ipSecAhTransformReplayPreventionWindowSize,
ipSecAhTransformVendorId, ipSecAhTransformVendorId,
skipping to change at line 1787 skipping to change at line 1760
::= { ipSecAhTransformTable 1 } ::= { ipSecAhTransformTable 1 }
IpSecAhTransformEntry ::= SEQUENCE { IpSecAhTransformEntry ::= SEQUENCE {
ipSecAhTransformPrid InstanceId, ipSecAhTransformPrid InstanceId,
ipSecAhTransformTransformId INTEGER, ipSecAhTransformTransformId INTEGER,
ipSecAhTransformIntegrityKey OCTET STRING, ipSecAhTransformIntegrityKey OCTET STRING,
ipSecAhTransformUseReplayPrevention TruthValue, ipSecAhTransformUseReplayPrevention TruthValue,
ipSecAhTransformReplayPreventionWindowSize Unsigned32, ipSecAhTransformReplayPreventionWindowSize Unsigned32,
ipSecAhTransformVendorId OCTET STRING, ipSecAhTransformVendorId OCTET STRING,
ipSecAhTransformMaxLifetimeSeconds Unsigned32, ipSecAhTransformMaxLifetimeSeconds Unsigned32,
ipSecAhTransformMaxLifetimeKilobytes Unsigned32 ipSecAhTransformMaxLifetimeKilobytes Unsigned64
} }
ipSecAhTransformPrid OBJECT-TYPE ipSecAhTransformPrid OBJECT-TYPE
SYNTAX InstanceId SYNTAX InstanceId
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An integer index that uniquely identifies an instance of this "An integer index that uniquely identifies an instance of this
class. " class. "
::= { ipSecAhTransformEntry 1 } ::= { ipSecAhTransformEntry 1 }
skipping to change at line 1819 skipping to change at line 1792
ipSecAhTransformIntegrityKey OBJECT-TYPE ipSecAhTransformIntegrityKey OBJECT-TYPE
SYNTAX OCTET STRING SYNTAX OCTET STRING
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"When this AH transform instance is used for a Static Action, this "When this AH transform instance is used for a Static Action, this
attribute specifies the integrity key to be used. This attribute attribute specifies the integrity key to be used. This attribute
MUST be ignored when this AH transform instance is used for a MUST be ignored when this AH transform instance is used for a
Negotiation Action." Negotiation Action."
::= { ipSecAhTransformEntry 3 } ::= { ipSecAhTransformEntry 3 }
Li, et al Expires February, 2003 32 Li, et al Expires June 2003 32
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
ipSecAhTransformUseReplayPrevention OBJECT-TYPE ipSecAhTransformUseReplayPrevention OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Specifies whether to enable replay prevention detection." "Specifies whether to enable replay prevention detection."
::= { ipSecAhTransformEntry 4 } ::= { ipSecAhTransformEntry 4 }
ipSecAhTransformReplayPreventionWindowSize OBJECT-TYPE ipSecAhTransformReplayPreventionWindowSize OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
skipping to change at line 1859 skipping to change at line 1831
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Specifies the maximum amount of time to propose for a security "Specifies the maximum amount of time to propose for a security
association to remain valid. association to remain valid.
A value of zero indicates that the default of 8 hours be used. A A value of zero indicates that the default of 8 hours be used. A
non-zero value indicates the maximum seconds lifetime." non-zero value indicates the maximum seconds lifetime."
::= { ipSecAhTransformEntry 7 } ::= { ipSecAhTransformEntry 7 }
ipSecAhTransformMaxLifetimeKilobytes OBJECT-TYPE ipSecAhTransformMaxLifetimeKilobytes OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned64
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Specifies the maximum kilobyte lifetime to propose for a security "Specifies the maximum kilobyte lifetime to propose for a security
association to remain valid. association to remain valid.
A value of zero indicates that there should be no maximum kilobyte A value of zero indicates that there should be no maximum kilobyte
lifetime. A non-zero value specifies the desired kilobyte lifetime. A non-zero value specifies the desired kilobyte
lifetime." lifetime."
::= { ipSecAhTransformEntry 8 } ::= { ipSecAhTransformEntry 8 }
-- --
-- --
-- The ipSecEspTransformSetTable -- The ipSecEspTransformSetTable
-- --
Li, et al Expires February, 2003 33 Li, et al Expires June 2003 33
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
ipSecEspTransformSetTable OBJECT-TYPE ipSecEspTransformSetTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpSecEspTransformSetEntry SYNTAX SEQUENCE OF IpSecEspTransformSetEntry
PIB-ACCESS install PIB-ACCESS install
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Specifies ESP transform sets. Within a transform set, the choices "Specifies ESP transform sets. Within a transform set, the choices
are ORed with preference order. " are ORed with preference order. "
::= { ipSecEspTransform 1 } ::= { ipSecEspTransform 1 }
skipping to change at line 1932 skipping to change at line 1903
TransformSetId." TransformSetId."
::= { ipSecEspTransformSetEntry 2 } ::= { ipSecEspTransformSetEntry 2 }
ipSecEspTransformSetTransformId OBJECT-TYPE ipSecEspTransformSetTransformId OBJECT-TYPE
SYNTAX ReferenceId SYNTAX ReferenceId
PIB-REFERENCES {ipSecEspTransformEntry } PIB-REFERENCES {ipSecEspTransformEntry }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A pointer to a valid instance in the ipSecEspTransformTable." "A pointer to a valid instance in the ipSecEspTransformTable."
Li, et al Expires February, 2003 34 Li, et al Expires June 2003 34
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
::= { ipSecEspTransformSetEntry 3 } ::= { ipSecEspTransformSetEntry 3 }
ipSecEspTransformSetOrder OBJECT-TYPE ipSecEspTransformSetOrder OBJECT-TYPE
SYNTAX Unsigned16 SYNTAX Unsigned16
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An integer that specifies the precedence order of the transform "An integer that specifies the precedence order of the transform
identified by ipSecEspTransformSetTransformId within a transform identified by ipSecEspTransformSetTransformId within a transform
set. The transform set is identified by set. The transform set is identified by
skipping to change at line 1989 skipping to change at line 1959
ipSecEspTransformMaxLifetimeSeconds, ipSecEspTransformMaxLifetimeSeconds,
ipSecEspTransformMaxLifetimeKilobytes ipSecEspTransformMaxLifetimeKilobytes
} }
::= { ipSecEspTransformTable 1 } ::= { ipSecEspTransformTable 1 }
IpSecEspTransformEntry ::= SEQUENCE { IpSecEspTransformEntry ::= SEQUENCE {
ipSecEspTransformPrid InstanceId, ipSecEspTransformPrid InstanceId,
ipSecEspTransformIntegrityTransformId INTEGER, ipSecEspTransformIntegrityTransformId INTEGER,
ipSecEspTransformCipherTransformId INTEGER, ipSecEspTransformCipherTransformId INTEGER,
Li, et al Expires February, 2003 35 Li, et al Expires June 2003 35
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
ipSecEspTransformIntegrityKey OCTET STRING, ipSecEspTransformIntegrityKey OCTET STRING,
ipSecEspTransformCipherKey OCTET STRING, ipSecEspTransformCipherKey OCTET STRING,
ipSecEspTransformCipherKeyRounds Unsigned16, ipSecEspTransformCipherKeyRounds Unsigned16,
ipSecEspTransformCipherKeyLength Unsigned16, ipSecEspTransformCipherKeyLength Unsigned16,
ipSecEspTransformUseReplayPrevention TruthValue, ipSecEspTransformUseReplayPrevention TruthValue,
ipSecEspTransformReplayPreventionWindowSize Unsigned32, ipSecEspTransformReplayPreventionWindowSize Unsigned32,
ipSecEspTransformVendorId OCTET STRING, ipSecEspTransformVendorId OCTET STRING,
ipSecEspTransformMaxLifetimeSeconds Unsigned32, ipSecEspTransformMaxLifetimeSeconds Unsigned32,
ipSecEspTransformMaxLifetimeKilobytes Unsigned32 ipSecEspTransformMaxLifetimeKilobytes Unsigned64
} }
ipSecEspTransformPrid OBJECT-TYPE ipSecEspTransformPrid OBJECT-TYPE
SYNTAX InstanceId SYNTAX InstanceId
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An integer index that uniquely identifies an instance of this "An integer index that uniquely identifies an instance of this
class." class."
::= { ipSecEspTransformEntry 1 } ::= { ipSecEspTransformEntry 1 }
skipping to change at line 2046 skipping to change at line 2015
desIV32(9), desIV32(9),
rc4(10), rc4(10),
null(11) null(11)
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Specifies the transform ID of the ESP encryption algorithm to "Specifies the transform ID of the ESP encryption algorithm to
propose." propose."
::= { ipSecEspTransformEntry 3 } ::= { ipSecEspTransformEntry 3 }
Li, et al Expires February, 2003 36 Li, et al Expires June 2003 36
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
ipSecEspTransformIntegrityKey OBJECT-TYPE ipSecEspTransformIntegrityKey OBJECT-TYPE
SYNTAX OCTET STRING SYNTAX OCTET STRING
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"When this ESP transform instance is used for a Static Action, "When this ESP transform instance is used for a Static Action,
this attribute specifies the integrity key to be used. This this attribute specifies the integrity key to be used. This
attribute MUST be ignored when this ESP transform instance is used attribute MUST be ignored when this ESP transform instance is used
for a Negotiation Action." for a Negotiation Action."
::= { ipSecEspTransformEntry 4 } ::= { ipSecEspTransformEntry 4 }
skipping to change at line 2104 skipping to change at line 2072
ipSecEspTransformReplayPreventionWindowSize OBJECT-TYPE ipSecEspTransformReplayPreventionWindowSize OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned32
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Specifies, in bits, the length of the sliding window used by the "Specifies, in bits, the length of the sliding window used by the
replay prevention detection mechanism. The value of this property replay prevention detection mechanism. The value of this property
is ignored if UseReplayPrevention is false. It is assumed that the is ignored if UseReplayPrevention is false. It is assumed that the
window size will be power of 2." window size will be power of 2."
Li, et al Expires February, 2003 37 Li, et al Expires June 2003 37
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
::= { ipSecEspTransformEntry 9 } ::= { ipSecEspTransformEntry 9 }
ipSecEspTransformVendorId OBJECT-TYPE ipSecEspTransformVendorId OBJECT-TYPE
SYNTAX OCTET STRING SYNTAX OCTET STRING
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Specifies the vendor ID for vendor-defined transforms." "Specifies the vendor ID for vendor-defined transforms."
::= { ipSecEspTransformEntry 10 } ::= { ipSecEspTransformEntry 10 }
skipping to change at line 2129 skipping to change at line 2096
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Specifies the maximum amount of time to propose for a security "Specifies the maximum amount of time to propose for a security
association to remain valid. association to remain valid.
A value of zero indicates that the default of 8 hours be used. A A value of zero indicates that the default of 8 hours be used. A
non-zero value indicates the maximum seconds lifetime." non-zero value indicates the maximum seconds lifetime."
::= { ipSecEspTransformEntry 11 } ::= { ipSecEspTransformEntry 11 }
ipSecEspTransformMaxLifetimeKilobytes OBJECT-TYPE ipSecEspTransformMaxLifetimeKilobytes OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned64
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Specifies the maximum kilobyte lifetime to propose for a security "Specifies the maximum kilobyte lifetime to propose for a security
association to remain valid. association to remain valid.
A value of zero indicates that there should be no maximum kilobyte A value of zero indicates that there should be no maximum kilobyte
lifetime. A non-zero value specifies the desired kilobyte lifetime. A non-zero value specifies the desired kilobyte
lifetime." lifetime."
::= { ipSecEspTransformEntry 12 } ::= { ipSecEspTransformEntry 12 }
skipping to change at line 2161 skipping to change at line 2128
choices are ORed with preference order." choices are ORed with preference order."
::= { ipSecCompTransform 1 } ::= { ipSecCompTransform 1 }
ipSecCompTransformSetEntry OBJECT-TYPE ipSecCompTransformSetEntry OBJECT-TYPE
SYNTAX IpSecCompTransformSetEntry SYNTAX IpSecCompTransformSetEntry
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Specifies an instance of this class" "Specifies an instance of this class"
PIB-INDEX { ipSecCompTransformSetPrid } PIB-INDEX { ipSecCompTransformSetPrid }
Li, et al Expires February, 2003 38 Li, et al Expires June 2003 38
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
UNIQUENESS { UNIQUENESS {
ipSecCompTransformSetTransformSetId, ipSecCompTransformSetTransformSetId,
ipSecCompTransformSetTransformId, ipSecCompTransformSetTransformId,
ipSecCompTransformSetOrder ipSecCompTransformSetOrder
} }
::= { ipSecCompTransformSetTable 1 } ::= { ipSecCompTransformSetTable 1 }
IpSecCompTransformSetEntry ::= SEQUENCE { IpSecCompTransformSetEntry ::= SEQUENCE {
ipSecCompTransformSetPrid InstanceId, ipSecCompTransformSetPrid InstanceId,
skipping to change at line 2218 skipping to change at line 2184
"An integer that specifies the precedence order of the transform "An integer that specifies the precedence order of the transform
identified by ipSecCompTransformSetTransformId within a transform identified by ipSecCompTransformSetTransformId within a transform
set. The transform set is identified by set. The transform set is identified by
ipSecCompTransformSetTransformSetId. Transforms within a set are ipSecCompTransformSetTransformSetId. Transforms within a set are
ORed with preference order. A smaller integer value indicates a ORed with preference order. A smaller integer value indicates a
higher preference." higher preference."
::= { ipSecCompTransformSetEntry 4 } ::= { ipSecCompTransformSetEntry 4 }
-- --
Li, et al Expires February, 2003 39 Li, et al Expires June 2003 39
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
-- --
-- The ipSecCompTransformTable -- The ipSecCompTransformTable
-- --
ipSecCompTransformTable OBJECT-TYPE ipSecCompTransformTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpSecCompTransformEntry SYNTAX SEQUENCE OF IpSecCompTransformEntry
PIB-ACCESS install PIB-ACCESS install
STATUS current STATUS current
DESCRIPTION DESCRIPTION
skipping to change at line 2257 skipping to change at line 2222
} }
::= { ipSecCompTransformTable 1 } ::= { ipSecCompTransformTable 1 }
IpSecCompTransformEntry ::= SEQUENCE { IpSecCompTransformEntry ::= SEQUENCE {
ipSecCompTransformPrid InstanceId, ipSecCompTransformPrid InstanceId,
ipSecCompTransformAlgorithm INTEGER, ipSecCompTransformAlgorithm INTEGER,
ipSecCompTransformDictionarySize Unsigned16, ipSecCompTransformDictionarySize Unsigned16,
ipSecCompTransformPrivateAlgorithm Unsigned32, ipSecCompTransformPrivateAlgorithm Unsigned32,
ipSecCompTransformVendorId OCTET STRING, ipSecCompTransformVendorId OCTET STRING,
ipSecCompTransformMaxLifetimeSeconds Unsigned32, ipSecCompTransformMaxLifetimeSeconds Unsigned32,
ipSecCompTransformMaxLifetimeKilobytes Unsigned32 ipSecCompTransformMaxLifetimeKilobytes Unsigned64
} }
ipSecCompTransformPrid OBJECT-TYPE ipSecCompTransformPrid OBJECT-TYPE
SYNTAX InstanceId SYNTAX InstanceId
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An integer index that uniquely identifies an instance of this "An integer index that uniquely identifies an instance of this
class." class."
::= { ipSecCompTransformEntry 1 } ::= { ipSecCompTransformEntry 1 }
ipSecCompTransformAlgorithm OBJECT-TYPE ipSecCompTransformAlgorithm OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
oui(1), oui(1),
deflate(2), deflate(2),
lzs(3) lzs(3)
} }
STATUS current STATUS current
Li, et al Expires February, 2003 40 Li, et al Expires June 2003 40
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
DESCRIPTION DESCRIPTION
"Specifies the transform ID of the IPCOMP compression algorithm to "Specifies the transform ID of the IPCOMP compression algorithm to
propose." propose."
::= { ipSecCompTransformEntry 2 } ::= { ipSecCompTransformEntry 2 }
ipSecCompTransformDictionarySize OBJECT-TYPE ipSecCompTransformDictionarySize OBJECT-TYPE
SYNTAX Unsigned16 SYNTAX Unsigned16
STATUS current STATUS current
DESCRIPTION DESCRIPTION
skipping to change at line 2320 skipping to change at line 2284
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Specifies the maximum amount of time to propose for a security "Specifies the maximum amount of time to propose for a security
association to remain valid. association to remain valid.
A value of zero indicates that the default of 8 hours be used. A A value of zero indicates that the default of 8 hours be used. A
non-zero value indicates the maximum seconds lifetime." non-zero value indicates the maximum seconds lifetime."
::= { ipSecCompTransformEntry 6 } ::= { ipSecCompTransformEntry 6 }
ipSecCompTransformMaxLifetimeKilobytes OBJECT-TYPE ipSecCompTransformMaxLifetimeKilobytes OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned64
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Specifies the maximum kilobyte lifetime to propose for a security "Specifies the maximum kilobyte lifetime to propose for a security
association to remain valid. association to remain valid.
A value of zero indicates that there should be no maximum kilobyte A value of zero indicates that there should be no maximum kilobyte
lifetime. A non-zero value specifies the desired kilobyte lifetime. A non-zero value specifies the desired kilobyte
lifetime." lifetime."
::= { ipSecCompTransformEntry 7 } ::= { ipSecCompTransformEntry 7 }
-- --
Li, et al Expires February, 2003 41 Li, et al Expires June 2003 41
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
-- --
-- The ipSecIkeRuleTable -- The ipSecIkeRuleTable
-- --
ipSecIkeRuleTable OBJECT-TYPE ipSecIkeRuleTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpSecIkeRuleEntry SYNTAX SEQUENCE OF IpSecIkeRuleEntry
PIB-ACCESS install PIB-ACCESS install
STATUS current STATUS current
DESCRIPTION DESCRIPTION
skipping to change at line 2391 skipping to change at line 2354
ipSecIkeRuleIpSecRuleTimePeriodGroupId TagReferenceId ipSecIkeRuleIpSecRuleTimePeriodGroupId TagReferenceId
} }
ipSecIkeRulePrid OBJECT-TYPE ipSecIkeRulePrid OBJECT-TYPE
SYNTAX InstanceId SYNTAX InstanceId
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An integer index that uniquely identifies an instance of this "An integer index that uniquely identifies an instance of this
class." class."
Li, et al Expires February, 2003 42 Li, et al Expires June 2003 42
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
::= { ipSecIkeRuleEntry 1 } ::= { ipSecIkeRuleEntry 1 }
ipSecIkeRuleIfName OBJECT-TYPE ipSecIkeRuleIfName OBJECT-TYPE
SYNTAX SnmpAdminString SYNTAX SnmpAdminString
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The interface capability set to which this IKE rule applies. The "The interface capability set to which this IKE rule applies. The
interface capability name specified by this attribute must exist interface capability name specified by this attribute must exist
in the frwkIfCapSetTable [FR-PIB] prior to association with an in the frwkCapabilitySetTable [9] prior to association with an
instance of this class. instance of this class.
This attribute MUST be ignored if ipSecIkeRuleAutoStart is false." This attribute MUST be ignored if ipSecIkeRuleAutoStart is false."
::= { ipSecIkeRuleEntry 2 } ::= { ipSecIkeRuleEntry 2 }
ipSecIkeRuleRoles OBJECT-TYPE ipSecIkeRuleRoles OBJECT-TYPE
SYNTAX RoleCombination SYNTAX RoleCombination
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Specifies the role combination of the interface to which this IKE "Specifies the role combination of the interface to which this IKE
rule should apply. There must exist an instance in the rule should apply. There must exist an instance in the
frwkIfCapSetRoleComboTable [FR-PIB] specifying this role frwkRoleComboTable [9] specifying this role combination, together
combination, together with the interface capability set specified with the interface capability set specified by ipSecIkeRuleIfName,
by ipSecIkeRuleIfName, prior to association with an instance of prior to association with an instance of this class.
this class.
This attribute MUST be ignored if ipSecIkeRuleAutoStart is false." This attribute MUST be ignored if ipSecIkeRuleAutoStart is false."
::= { ipSecIkeRuleEntry 3 } ::= { ipSecIkeRuleEntry 3 }
ipSecIkeRuleIkeActionSetId OBJECT-TYPE ipSecIkeRuleIkeActionSetId OBJECT-TYPE
SYNTAX TagReferenceId SYNTAX TagReferenceId
PIB-TAG { ipSecIkeActionSetActionSetId } PIB-TAG { ipSecIkeActionSetActionSetId }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Identifies a set of IKE actions to be associated with this rule." "Identifies a set of IKE actions to be associated with this rule."
skipping to change at line 2449 skipping to change at line 2410
actions in the action set identified by ipSecRuleIpSecActionSetId. actions in the action set identified by ipSecRuleIpSecActionSetId.
DoAll (1) causes the execution of all the actions in the action DoAll (1) causes the execution of all the actions in the action
set according to their defined precedence order. The precedence set according to their defined precedence order. The precedence
order is specified by the ipSecActionSetOrder in order is specified by the ipSecActionSetOrder in
ipSecIkeActionSetTable. ipSecIkeActionSetTable.
DoUntilSuccess (2) causes the execution of actions according to DoUntilSuccess (2) causes the execution of actions according to
their defined precedence order until a successful execution of a their defined precedence order until a successful execution of a
Li, et al Expires February, 2003 43 Li, et al Expires June 2003 43
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
single action. The precedence order is specified by the single action. The precedence order is specified by the
ipSecActionSetOrder in ipSecIkeActionSetTable." ipSecActionSetOrder in ipSecIkeActionSetTable."
::= { ipSecIkeRuleEntry 5 } ::= { ipSecIkeRuleEntry 5 }
ipSecIkeRuleLimitNegotiation OBJECT-TYPE ipSecIkeRuleLimitNegotiation OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
initiator(1), initiator(1),
responder(2), responder(2),
both(3) both(3)
skipping to change at line 2506 skipping to change at line 2466
-- The ipSecIkeActionSetTable -- The ipSecIkeActionSetTable
-- --
ipSecIkeActionSetTable OBJECT-TYPE ipSecIkeActionSetTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpSecIkeActionSetEntry SYNTAX SEQUENCE OF IpSecIkeActionSetEntry
PIB-ACCESS install PIB-ACCESS install
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Specifies IKE action sets." "Specifies IKE action sets."
Li, et al Expires February, 2003 44 Li, et al Expires June 2003 44
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
::= { ipSecIkeAssociation 2 } ::= { ipSecIkeAssociation 2 }
ipSecIkeActionSetEntry OBJECT-TYPE ipSecIkeActionSetEntry OBJECT-TYPE
SYNTAX IpSecIkeActionSetEntry SYNTAX IpSecIkeActionSetEntry
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Specifies an instance of this class" "Specifies an instance of this class"
PIB-INDEX { ipSecIkeActionSetPrid } PIB-INDEX { ipSecIkeActionSetPrid }
UNIQUENESS { UNIQUENESS {
ipSecIkeActionSetActionSetId, ipSecIkeActionSetActionSetId,
ipSecIkeActionSetActionId, ipSecIkeActionSetActionId,
ipSecIkeActionSetOrder ipSecIkeActionSetOrder
} }
::= { ipSecIkeActionSetTable 1 } ::= { ipSecIkeActionSetTable 1 }
IpSecIkeActionSetEntry ::= SEQUENCE { IpSecIkeActionSetEntry ::= SEQUENCE {
ipSecIkeActionSetPrid InstanceId, ipSecIkeActionSetPrid InstanceId,
ipSecIkeActionSetActionSetId TagId, ipSecIkeActionSetActionSetId TagId,
ipSecIkeActionSetActionId Prid, ipSecIkeActionSetActionId ReferenceId,
ipSecIkeActionSetOrder Unsigned16 ipSecIkeActionSetOrder Unsigned16
} }
ipSecIkeActionSetPrid OBJECT-TYPE ipSecIkeActionSetPrid OBJECT-TYPE
SYNTAX InstanceId SYNTAX InstanceId
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An integer index that uniquely identifies an instance of this "An integer index that uniquely identifies an instance of this
class." class."
::= { ipSecIkeActionSetEntry 1 } ::= { ipSecIkeActionSetEntry 1 }
ipSecIkeActionSetActionSetId OBJECT-TYPE ipSecIkeActionSetActionSetId OBJECT-TYPE
SYNTAX TagId SYNTAX TagId
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An IKE action set is composed of one or more IKE actions. Each "An IKE action set is composed of one or more IKE actions. Each
action belonging to the same set has the same ActionSetId." action belonging to the same set has the same ActionSetId."
::= { ipSecIkeActionSetEntry 2 } ::= { ipSecIkeActionSetEntry 2 }
ipSecIkeActionSetActionId OBJECT-TYPE ipSecIkeActionSetActionId OBJECT-TYPE
SYNTAX Prid SYNTAX ReferenceId
PIB-REFERENCES {ipSecIkeAssociationEntry }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A pointer to a valid instance in the ipSecIkeAssociationTable." "A pointer to a valid instance in the ipSecIkeAssociationTable."
::= { ipSecIkeActionSetEntry 3 } ::= { ipSecIkeActionSetEntry 3 }
ipSecIkeActionSetOrder OBJECT-TYPE ipSecIkeActionSetOrder OBJECT-TYPE
SYNTAX Unsigned16 SYNTAX Unsigned16
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Specifies the precedence order of the action within the action "Specifies the precedence order of the action within the action
set. An action with a smaller precedence order is to be tried set. An action with a smaller precedence order is to be tried
before one with a larger precedence order. " before one with a larger precedence order. "
::= { ipSecIkeActionSetEntry 4 }
Li, et al Expires February, 2003 45 Li, et al Expires June 2003 45
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002 ::= { ipSecIkeActionSetEntry 4 }
-- --
-- --
-- The ipSecIkeAssociationTable -- The ipSecIkeAssociationTable
-- --
ipSecIkeAssociationTable OBJECT-TYPE ipSecIkeAssociationTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpSecIkeAssociationEntry SYNTAX SEQUENCE OF IpSecIkeAssociationEntry
PIB-ACCESS install PIB-ACCESS install
STATUS current STATUS current
skipping to change at line 2607 skipping to change at line 2567
ipSecIkeAssociationAggressiveModeGroupId, ipSecIkeAssociationAggressiveModeGroupId,
ipSecIkeAssociationLocalCredentialId, ipSecIkeAssociationLocalCredentialId,
ipSecIkeAssociationDoActionLogging, ipSecIkeAssociationDoActionLogging,
ipSecIkeAssociationIkeProposalSetId ipSecIkeAssociationIkeProposalSetId
} }
::= { ipSecIkeAssociationTable 1 } ::= { ipSecIkeAssociationTable 1 }
IpSecIkeAssociationEntry ::= SEQUENCE { IpSecIkeAssociationEntry ::= SEQUENCE {
ipSecIkeAssociationPrid InstanceId, ipSecIkeAssociationPrid InstanceId,
ipSecIkeAssociationMinLiftetimeSeconds Unsigned32, ipSecIkeAssociationMinLiftetimeSeconds Unsigned32,
ipSecIkeAssociationMinLifetimeKilobytes Unsigned32, ipSecIkeAssociationMinLifetimeKilobytes Unsigned64,
ipSecIkeAssociationIdleDurationSeconds Unsigned32, ipSecIkeAssociationIdleDurationSeconds Unsigned32,
ipSecIkeAssociationExchangeMode INTEGER, ipSecIkeAssociationExchangeMode INTEGER,
ipSecIkeAssociationUseIkeIdentityType INTEGER, ipSecIkeAssociationUseIkeIdentityType INTEGER,
ipSecIkeAssociationUseIkeIdentityValue OCTET STRING, ipSecIkeAssociationUseIkeIdentityValue OCTET STRING,
ipSecIkeAssociationIkePeerEndpoint ReferenceId, ipSecIkeAssociationIkePeerEndpoint ReferenceId,
ipSecIkeAssociationPresharedKey OCTET STRING, ipSecIkeAssociationPresharedKey OCTET STRING,
ipSecIkeAssociationVendorId OCTET STRING, ipSecIkeAssociationVendorId OCTET STRING,
ipSecIkeAssociationAggressiveModeGroupId Unsigned16, ipSecIkeAssociationAggressiveModeGroupId Unsigned16,
ipSecIkeAssociationLocalCredentialId TagReferenceId, ipSecIkeAssociationLocalCredentialId TagReferenceId,
ipSecIkeAssociationDoActionLogging TruthValue, ipSecIkeAssociationDoActionLogging TruthValue,
ipSecIkeAssociationIkeProposalSetId TagReferenceId
Li, et al Expires February, 2003 46
IPsec Policy Information Base August, 2002 Li, et al Expires June 2003 46
IPsec Policy Information Base November 2002
ipSecIkeAssociationIkeProposalSetId TagReferenceId
} }
ipSecIkeAssociationPrid OBJECT-TYPE ipSecIkeAssociationPrid OBJECT-TYPE
SYNTAX InstanceId SYNTAX InstanceId
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An integer index that uniquely identifies an instance of this "An integer index that uniquely identifies an instance of this
class." class."
::= { ipSecIkeAssociationEntry 1 } ::= { ipSecIkeAssociationEntry 1 }
skipping to change at line 2646 skipping to change at line 2605
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Specifies the minimum SA seconds lifetime that will be accepted "Specifies the minimum SA seconds lifetime that will be accepted
from a peer while negotiating an SA based upon this action. from a peer while negotiating an SA based upon this action.
A value of zero indicates that there is no minimum lifetime A value of zero indicates that there is no minimum lifetime
enforced." enforced."
::= { ipSecIkeAssociationEntry 2 } ::= { ipSecIkeAssociationEntry 2 }
ipSecIkeAssociationMinLifetimeKilobytes OBJECT-TYPE ipSecIkeAssociationMinLifetimeKilobytes OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned64
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Specifies the minimum kilobyte lifetime that will be accepted "Specifies the minimum kilobyte lifetime that will be accepted
from a negotiating peer while negotiating an SA based upon this from a negotiating peer while negotiating an SA based upon this
action. action.
A value of zero indicates that there is no minimum lifetime A value of zero indicates that there is no minimum lifetime
enforced." enforced."
::= { ipSecIkeAssociationEntry 3 } ::= { ipSecIkeAssociationEntry 3 }
skipping to change at line 2676 skipping to change at line 2635
lifetimes will be used)." lifetimes will be used)."
::= { ipSecIkeAssociationEntry 4 } ::= { ipSecIkeAssociationEntry 4 }
ipSecIkeAssociationExchangeMode OBJECT-TYPE ipSecIkeAssociationExchangeMode OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
baseMode(1), baseMode(1),
mainMode(2), mainMode(2),
aggressiveMode(4) aggressiveMode(4)
} }
STATUS current STATUS current
DESCRIPTION
Li, et al Expires February, 2003 47
IPsec Policy Information Base August, 2002 Li, et al Expires June 2003 47
IPsec Policy Information Base November 2002
DESCRIPTION
"Specifies the negotiation mode that the IKE server will use for "Specifies the negotiation mode that the IKE server will use for
phase one." phase one."
::= { ipSecIkeAssociationEntry 5 } ::= { ipSecIkeAssociationEntry 5 }
ipSecIkeAssociationUseIkeIdentityType OBJECT-TYPE ipSecIkeAssociationUseIkeIdentityType OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
ipV4-Address(1), ipV4-Address(1),
fqdn(2), fqdn(2),
user-Fqdn(3), user-Fqdn(3),
ipV4-Subnet(4), ipV4-Subnet(4),
skipping to change at line 2734 skipping to change at line 2692
SYNTAX OCTET STRING SYNTAX OCTET STRING
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This attribute specifies the preshared key or secret to use for "This attribute specifies the preshared key or secret to use for
IKE authentication. This is the key for all the IKE proposals of IKE authentication. This is the key for all the IKE proposals of
this association that set ipSecIkeProposalAuthenticationMethod to this association that set ipSecIkeProposalAuthenticationMethod to
presharedKey(1)." presharedKey(1)."
::= { ipSecIkeAssociationEntry 9 } ::= { ipSecIkeAssociationEntry 9 }
ipSecIkeAssociationVendorId OBJECT-TYPE ipSecIkeAssociationVendorId OBJECT-TYPE
SYNTAX OCTET STRING
Li, et al Expires February, 2003 48 Li, et al Expires June 2003 48
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
SYNTAX OCTET STRING
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Specifies the value to be used in the Vendor ID payload. "Specifies the value to be used in the Vendor ID payload.
A value of NULL means that Vendor ID payload will be neither A value of NULL means that Vendor ID payload will be neither
generated nor accepted. A non-NULL value means that a Vendor ID generated nor accepted. A non-NULL value means that a Vendor ID
payload will be generated (when acting as an initiator) or is payload will be generated (when acting as an initiator) or is
expected (when acting as a responder). " expected (when acting as a responder). "
::= { ipSecIkeAssociationEntry 10 } ::= { ipSecIkeAssociationEntry 10 }
skipping to change at line 2791 skipping to change at line 2748
PIB-TAG { ipSecIkeProposalSetProposalSetId } PIB-TAG { ipSecIkeProposalSetProposalSetId }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Identifies a set of IKE proposals that is associated with this "Identifies a set of IKE proposals that is associated with this
IKE association." IKE association."
::= { ipSecIkeAssociationEntry 14 } ::= { ipSecIkeAssociationEntry 14 }
-- --
-- --
-- The ipSecIkeProposalSetTable -- The ipSecIkeProposalSetTable
--
Li, et al Expires February, 2003 49 Li, et al Expires June 2003 49
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002 --
ipSecIkeProposalSetTable OBJECT-TYPE ipSecIkeProposalSetTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpSecIkeProposalSetEntry SYNTAX SEQUENCE OF IpSecIkeProposalSetEntry
PIB-ACCESS install PIB-ACCESS install
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Specifies IKE proposal sets. Proposals within a set are ORed with "Specifies IKE proposal sets. Proposals within a set are ORed with
preference order. " preference order. "
::= { ipSecIkeAssociation 4 } ::= { ipSecIkeAssociation 4 }
skipping to change at line 2848 skipping to change at line 2805
"An IKE proposal set is composed of one or more IKE proposals. "An IKE proposal set is composed of one or more IKE proposals.
Each proposal belonging to the same set has the same Each proposal belonging to the same set has the same
ProposalSetId. " ProposalSetId. "
::= { ipSecIkeProposalSetEntry 2 } ::= { ipSecIkeProposalSetEntry 2 }
ipSecIkeProposalSetProposalId OBJECT-TYPE ipSecIkeProposalSetProposalId OBJECT-TYPE
SYNTAX ReferenceId SYNTAX ReferenceId
PIB-REFERENCES {ipSecIkeProposalEntry } PIB-REFERENCES {ipSecIkeProposalEntry }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A pointer to a valid instance in the ipSecIkeProposalTable."
Li, et al Expires February, 2003 50
IPsec Policy Information Base August, 2002 Li, et al Expires June 2003 50
IPsec Policy Information Base November 2002
"A pointer to a valid instance in the ipSecIkeProposalTable."
::= { ipSecIkeProposalSetEntry 3 } ::= { ipSecIkeProposalSetEntry 3 }
ipSecIkeProposalSetOrder OBJECT-TYPE ipSecIkeProposalSetOrder OBJECT-TYPE
SYNTAX Unsigned16 SYNTAX Unsigned16
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An integer that specifies the precedence order of the proposal "An integer that specifies the precedence order of the proposal
identified by ipSecIkeProposalSetProposalId in a proposal set. The identified by ipSecIkeProposalSetProposalId in a proposal set. The
proposal set is identified by ipSecIkeProposalSetProposalSetId. proposal set is identified by ipSecIkeProposalSetProposalSetId.
Proposals within a set are ORed with preference order. A smaller Proposals within a set are ORed with preference order. A smaller
skipping to change at line 2901 skipping to change at line 2857
ipSecIkeProposalAuthenticationMethod, ipSecIkeProposalAuthenticationMethod,
ipSecIkeProposalPrfAlgorithm, ipSecIkeProposalPrfAlgorithm,
ipSecIkeProposalIkeDhGroup, ipSecIkeProposalIkeDhGroup,
ipSecIkeProposalVendorId ipSecIkeProposalVendorId
} }
::= { ipSecIkeProposalTable 1 } ::= { ipSecIkeProposalTable 1 }
IpSecIkeProposalEntry ::= SEQUENCE { IpSecIkeProposalEntry ::= SEQUENCE {
ipSecIkeProposalPrid InstanceId, ipSecIkeProposalPrid InstanceId,
ipSecIkeProposalMaxLifetimeSeconds Unsigned32, ipSecIkeProposalMaxLifetimeSeconds Unsigned32,
ipSecIkeProposalMaxLifetimeKilobytes Unsigned32, ipSecIkeProposalMaxLifetimeKilobytes Unsigned64,
ipSecIkeProposalCipherAlgorithm INTEGER, ipSecIkeProposalCipherAlgorithm INTEGER,
ipSecIkeProposalHashAlgorithm INTEGER, ipSecIkeProposalHashAlgorithm INTEGER,
ipSecIkeProposalAuthenticationMethod INTEGER, ipSecIkeProposalAuthenticationMethod INTEGER,
ipSecIkeProposalPrfAlgorithm Unsigned16,
Li, et al Expires February, 2003 51
IPsec Policy Information Base August, 2002 Li, et al Expires June 2003 51
IPsec Policy Information Base November 2002
ipSecIkeProposalPrfAlgorithm Unsigned16,
ipSecIkeProposalIkeDhGroup Unsigned16, ipSecIkeProposalIkeDhGroup Unsigned16,
ipSecIkeProposalVendorId OCTET STRING ipSecIkeProposalVendorId OCTET STRING
} }
ipSecIkeProposalPrid OBJECT-TYPE ipSecIkeProposalPrid OBJECT-TYPE
SYNTAX InstanceId SYNTAX InstanceId
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An integer index that uniquely identifies an instance of this "An integer index that uniquely identifies an instance of this
class." class."
skipping to change at line 2935 skipping to change at line 2890
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Specifies the maximum amount of time to propose for a security "Specifies the maximum amount of time to propose for a security
association to remain valid. association to remain valid.
A value of zero indicates that the default of 8 hours be used. A A value of zero indicates that the default of 8 hours be used. A
non-zero value indicates the maximum seconds lifetime." non-zero value indicates the maximum seconds lifetime."
::= { ipSecIkeProposalEntry 2 } ::= { ipSecIkeProposalEntry 2 }
ipSecIkeProposalMaxLifetimeKilobytes OBJECT-TYPE ipSecIkeProposalMaxLifetimeKilobytes OBJECT-TYPE
SYNTAX Unsigned32 SYNTAX Unsigned64
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Specifies the maximum kilobyte lifetime to propose for a security "Specifies the maximum kilobyte lifetime to propose for a security
association to remain valid. association to remain valid.
A value of zero indicates that there should be no maximum kilobyte A value of zero indicates that there should be no maximum kilobyte
lifetime. A non-zero value specifies the desired kilobyte lifetime. A non-zero value specifies the desired kilobyte
lifetime." lifetime."
::= { ipSecIkeProposalEntry 3 } ::= { ipSecIkeProposalEntry 3 }
skipping to change at line 2963 skipping to change at line 2918
cast-CBC(6) cast-CBC(6)
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Specifies the encryption algorithm to propose for the IKE "Specifies the encryption algorithm to propose for the IKE
association." association."
::= { ipSecIkeProposalEntry 4 } ::= { ipSecIkeProposalEntry 4 }
ipSecIkeProposalHashAlgorithm OBJECT-TYPE ipSecIkeProposalHashAlgorithm OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
md5(1),
Li, et al Expires February, 2003 52
IPsec Policy Information Base August, 2002 Li, et al Expires June 2003 52
IPsec Policy Information Base November 2002
md5(1),
sha-1(2), sha-1(2),
tiger(3) tiger(3)
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Specifies the hash algorithm to propose for the IKE association." "Specifies the hash algorithm to propose for the IKE association."
::= { ipSecIkeProposalEntry 5 } ::= { ipSecIkeProposalEntry 5 }
ipSecIkeProposalAuthenticationMethod OBJECT-TYPE ipSecIkeProposalAuthenticationMethod OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
skipping to change at line 3020 skipping to change at line 2974
SYNTAX OCTET STRING SYNTAX OCTET STRING
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Further qualifies the key exchange group. The property is "Further qualifies the key exchange group. The property is
ignored unless the exchange is not in aggressive mode and the ignored unless the exchange is not in aggressive mode and the
property GroupID is in the vendor-specific range." property GroupID is in the vendor-specific range."
::= { ipSecIkeProposalEntry 9 } ::= { ipSecIkeProposalEntry 9 }
-- --
-- --
-- The ipSecIkePeerEndpointTable
Li, et al Expires February, 2003 53 Li, et al Expires June 2003 53
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
-- The ipSecIkePeerEndpointTable
-- --
ipSecIkePeerEndpointTable OBJECT-TYPE ipSecIkePeerEndpointTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpSecIkePeerEndpointEntry SYNTAX SEQUENCE OF IpSecIkePeerEndpointEntry
PIB-ACCESS install PIB-ACCESS install
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Specifies IKE peer endpoints." "Specifies IKE peer endpoints."
::= { ipSecIkeAssociation 6 } ::= { ipSecIkeAssociation 6 }
skipping to change at line 3078 skipping to change at line 3031
ipSecIkePeerEndpointIdentityType OBJECT-TYPE ipSecIkePeerEndpointIdentityType OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
ipV4-Address(1), ipV4-Address(1),
fqdn(2), fqdn(2),
user-Fqdn(3), user-Fqdn(3),
ipV4-Subnet(4), ipV4-Subnet(4),
ipV6-Address(5), ipV6-Address(5),
ipV6-Subnet(6), ipV6-Subnet(6),
ipV4-Address-Range(7), ipV4-Address-Range(7),
ipV6-Address-Range(8), ipV6-Address-Range(8),
der-Asn1-DN(9),
Li, et al Expires February, 2003 54
IPsec Policy Information Base August, 2002 Li, et al Expires June 2003 54
IPsec Policy Information Base November 2002
der-Asn1-DN(9),
der-Asn1-GN(10), der-Asn1-GN(10),
key-Id(11) key-Id(11)
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Specifies the type of identity that MUST be provided by the peer "Specifies the type of identity that MUST be provided by the peer
in the ID payload during IKE phase one negotiation." in the ID payload during IKE phase one negotiation."
::= { ipSecIkePeerEndpointEntry 2 } ::= { ipSecIkePeerEndpointEntry 2 }
ipSecIkePeerEndpointIdentityValue OBJECT-TYPE ipSecIkePeerEndpointIdentityValue OBJECT-TYPE
skipping to change at line 3136 skipping to change at line 3088
ipV4(1), ipV4(1),
ipV6(2) ipV6(2)
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Specifies IKE peer endpoint address type. This attribute MUST be "Specifies IKE peer endpoint address type. This attribute MUST be
ignored if ipSecIkeRuleAutoStart is false." ignored if ipSecIkeRuleAutoStart is false."
::= { ipSecIkePeerEndpointEntry 4 } ::= { ipSecIkePeerEndpointEntry 4 }
ipSecIkePeerEndpointAddress OBJECT-TYPE ipSecIkePeerEndpointAddress OBJECT-TYPE
SYNTAX OCTET STRING
Li, et al Expires February, 2003 55 Li, et al Expires June 2003 55
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
SYNTAX OCTET STRING
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Specifies an endpoint address with which this PEP establishes IKE "Specifies an endpoint address with which this PEP establishes IKE
association. This attribute is used only when the IKE association association. This attribute is used only when the IKE association
is to be started automatically. Hence, this attribute MUST be is to be started automatically. Hence, this attribute MUST be
ignored if ipSecIkeRuleAutoStart is false." ignored if ipSecIkeRuleAutoStart is false."
::= { ipSecIkePeerEndpointEntry 5 } ::= { ipSecIkePeerEndpointEntry 5 }
ipSecIkePeerEndpointCredentialSetId OBJECT-TYPE ipSecIkePeerEndpointCredentialSetId OBJECT-TYPE
SYNTAX TagReferenceId SYNTAX TagReferenceId
skipping to change at line 3193 skipping to change at line 3144
UNIQUENESS { UNIQUENESS {
ipSecCredentialSetPrid, ipSecCredentialSetPrid,
ipSecCredentialSetSetId, ipSecCredentialSetSetId,
ipSecCredentialSetCredentialId ipSecCredentialSetCredentialId
} }
::= { ipSecCredentialSetTable 1 } ::= { ipSecCredentialSetTable 1 }
IpSecCredentialSetEntry ::= SEQUENCE { IpSecCredentialSetEntry ::= SEQUENCE {
ipSecCredentialSetPrid InstanceId, ipSecCredentialSetPrid InstanceId,
ipSecCredentialSetSetId TagId, ipSecCredentialSetSetId TagId,
ipSecCredentialSetCredentialId ReferenceId
Li, et al Expires February, 2003 56 Li, et al Expires June 2003 56
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
ipSecCredentialSetCredentialId ReferenceId
} }
ipSecCredentialSetPrid OBJECT-TYPE ipSecCredentialSetPrid OBJECT-TYPE
SYNTAX InstanceId SYNTAX InstanceId
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An integer index that uniquely identifies an instance of this "An integer index that uniquely identifies an instance of this
class." class."
::= { ipSecCredentialSetEntry 1 } ::= { ipSecCredentialSetEntry 1 }
skipping to change at line 3250 skipping to change at line 3200
SYNTAX IpSecCredentialEntry SYNTAX IpSecCredentialEntry
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Specifies an instance of this class" "Specifies an instance of this class"
PIB-INDEX { ipSecCredentialPrid } PIB-INDEX { ipSecCredentialPrid }
UNIQUENESS { UNIQUENESS {
ipSecCredentialCredentialType, ipSecCredentialCredentialType,
ipSecCredentialFieldsId, ipSecCredentialFieldsId,
ipSecCredentialCrlDistributionPoint ipSecCredentialCrlDistributionPoint
} }
::= { ipSecCredentialTable 1 }
Li, et al Expires February, 2003 57 Li, et al Expires June 2003 57
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002 ::= { ipSecCredentialTable 1 }
IpSecCredentialEntry ::= SEQUENCE { IpSecCredentialEntry ::= SEQUENCE {
ipSecCredentialPrid InstanceId, ipSecCredentialPrid InstanceId,
ipSecCredentialCredentialType INTEGER, ipSecCredentialCredentialType INTEGER,
ipSecCredentialFieldsId TagReferenceId, ipSecCredentialFieldsId TagReferenceId,
ipSecCredentialCrlDistributionPoint OCTET STRING ipSecCredentialCrlDistributionPoint OCTET STRING
} }
ipSecCredentialPrid OBJECT-TYPE ipSecCredentialPrid OBJECT-TYPE
SYNTAX InstanceId SYNTAX InstanceId
skipping to change at line 3306 skipping to change at line 3256
point for this credential." point for this credential."
::= { ipSecCredentialEntry 4 } ::= { ipSecCredentialEntry 4 }
-- --
-- --
-- The ipSecCredentialFieldsTable -- The ipSecCredentialFieldsTable
-- --
ipSecCredentialFieldsTable OBJECT-TYPE ipSecCredentialFieldsTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpSecCredentialFieldsEntry SYNTAX SEQUENCE OF IpSecCredentialFieldsEntry
PIB-ACCESS install
Li, et al Expires February, 2003 58
IPsec Policy Information Base August, 2002 Li, et al Expires June 2003 58
IPsec Policy Information Base November 2002
PIB-ACCESS install
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Specifies sets of credential sub-fields and their values to be "Specifies sets of credential sub-fields and their values to be
matched against. " matched against. "
::= { ipSecCredential 3 } ::= { ipSecCredential 3 }
ipSecCredentialFieldsEntry OBJECT-TYPE ipSecCredentialFieldsEntry OBJECT-TYPE
SYNTAX IpSecCredentialFieldsEntry SYNTAX IpSecCredentialFieldsEntry
STATUS current STATUS current
DESCRIPTION DESCRIPTION
skipping to change at line 3352 skipping to change at line 3301
"An integer index that uniquely identifies an instance of this "An integer index that uniquely identifies an instance of this
class." class."
::= { ipSecCredentialFieldsEntry 1 } ::= { ipSecCredentialFieldsEntry 1 }
ipSecCredentialFieldsName OBJECT-TYPE ipSecCredentialFieldsName OBJECT-TYPE
SYNTAX OCTET STRING SYNTAX OCTET STRING
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Specifies the sub-field of the credential to match with. This is "Specifies the sub-field of the credential to match with. This is
the string representation of a X.509 certificate attribute, e.g. the string representation of a X.509 certificate attribute, e.g.
serialNumber, issuerName, subjectName, etc." serialNumber, issuerName, subjectName, etc..
"
::= { ipSecCredentialFieldsEntry 2 } ::= { ipSecCredentialFieldsEntry 2 }
ipSecCredentialFieldsValue OBJECT-TYPE ipSecCredentialFieldsValue OBJECT-TYPE
SYNTAX OCTET STRING SYNTAX OCTET STRING
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Specifies the value to match with for the sub-field identified by "Specifies the value to match with for the sub-field identified by
ipSecCredentialFieldsName. A wildcard mechanism can be used in the ipSecCredentialFieldsName. A wildcard mechanism can be used in the
Value string. E.g., if the Name is subjectName then a Value of Value string. E.g., if the Name is subjectName then a Value of
cn=*,ou=engineering,o=foo,c=be will match successfully a cn=*,ou=engineering,o=foo,c=be will match successfully a
certificate whose subject attribute is cn=Jane Doe,
Li, et al Expires February, 2003 59 Li, et al Expires June 2003 59
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
certificate whose subject attribute is cn=Jane Doe,
ou=engineering, o=foo, c=be. The wildcard character * can be used ou=engineering, o=foo, c=be. The wildcard character * can be used
to represent 0 or several characters." to represent 0 or several characters."
::= { ipSecCredentialFieldsEntry 3 } ::= { ipSecCredentialFieldsEntry 3 }
ipSecCredentialFieldsSetId OBJECT-TYPE ipSecCredentialFieldsSetId OBJECT-TYPE
SYNTAX TagId SYNTAX TagId
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Specifies the set this criteria belongs to. All criteria within a "Specifies the set this criteria belongs to. All criteria within a
set MUST all be satisfied." set MUST all be satisfied."
skipping to change at line 3420 skipping to change at line 3369
ipSecSelectorSetSelectorId Prid, ipSecSelectorSetSelectorId Prid,
ipSecSelectorSetOrder Unsigned16 ipSecSelectorSetOrder Unsigned16
} }
ipSecSelectorSetPrid OBJECT-TYPE ipSecSelectorSetPrid OBJECT-TYPE
SYNTAX InstanceId SYNTAX InstanceId
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An integer index that uniquely identifies an instance of this "An integer index that uniquely identifies an instance of this
class." class."
::= { ipSecSelectorSetEntry 1 }
Li, et al Expires February, 2003 60 Li, et al Expires June 2003 60
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002 ::= { ipSecSelectorSetEntry 1 }
ipSecSelectorSetSelectorSetId OBJECT-TYPE ipSecSelectorSetSelectorSetId OBJECT-TYPE
SYNTAX TagId SYNTAX TagId
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An IPsec selector set is composed of one or more IPsec selectors. "An IPsec selector set is composed of one or more IPsec selectors.
Each selector belonging to the same set has the same Each selector belonging to the same set has the same
SelectorSetId." SelectorSetId."
::= { ipSecSelectorSetEntry 2 } ::= { ipSecSelectorSetEntry 2 }
skipping to change at line 3475 skipping to change at line 3424
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Specifies IPsec selectors. Each row in the selector table "Specifies IPsec selectors. Each row in the selector table
represents multiple selectors. These selectors are obtained as represents multiple selectors. These selectors are obtained as
follows: follows:
1. Substitute the ipSecSelectorSrcAddressGroupId with all the IP 1. Substitute the ipSecSelectorSrcAddressGroupId with all the IP
addresses from the ipSecAddressTable whose ipSecAddressGroupId addresses from the ipSecAddressTable whose ipSecAddressGroupId
matches the ipSecSelectorSrcAddressGroupId. matches the ipSecSelectorSrcAddressGroupId.
Li, et al Expires February, 2003 61 Li, et al Expires June 2003 61
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
2. Substitute the ipSecSelectorDstAddressGroupId with all the IP 2. Substitute the ipSecSelectorDstAddressGroupId with all the IP
addresses from the ipSecAddressTable whose ipSecAddressGroupId addresses from the ipSecAddressTable whose ipSecAddressGroupId
matches the ipSecSelectorDstAddressGroupId. matches the ipSecSelectorDstAddressGroupId.
3. Substitute the ipSecSelectorSrcPortGroupId with all the ports 3. Substitute the ipSecSelectorSrcPortGroupId with all the ports
or ranges of port whose ipSecL4PortGroupId matches the or ranges of port whose ipSecL4PortGroupId matches the
ipSecSelectorSrcPortGroupId. ipSecSelectorSrcPortGroupId.
4. Substitute the ipSecSelectorDstPortGroupId with all the ports 4. Substitute the ipSecSelectorDstPortGroupId with all the ports
skipping to change at line 3533 skipping to change at line 3481
ipSecSelectorProtocol INTEGER, ipSecSelectorProtocol INTEGER,
ipSecSelectorDscp INTEGER, ipSecSelectorDscp INTEGER,
ipSecSelectorFlowLabel OCTET STRING ipSecSelectorFlowLabel OCTET STRING
} }
ipSecSelectorPrid OBJECT-TYPE ipSecSelectorPrid OBJECT-TYPE
SYNTAX InstanceId SYNTAX InstanceId
STATUS current STATUS current
DESCRIPTION DESCRIPTION
Li, et al Expires February, 2003 62 Li, et al Expires June 2003 62
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
"An integer index that uniquely identifies an instance of this "An integer index that uniquely identifies an instance of this
class." class."
::= { ipSecSelectorEntry 1 } ::= { ipSecSelectorEntry 1 }
ipSecSelectorSrcAddressGroupId OBJECT-TYPE ipSecSelectorSrcAddressGroupId OBJECT-TYPE
SYNTAX TagReferenceId SYNTAX TagReferenceId
PIB-TAG { ipSecAddressGroupId } PIB-TAG { ipSecAddressGroupId }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
skipping to change at line 3591 skipping to change at line 3538
PIB-TAG { ipSecL4PortGroupId } PIB-TAG { ipSecL4PortGroupId }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates destination layer 4 port numbers. All ports in "Indicates destination layer 4 port numbers. All ports in
ipSecL4Port whose ipSecL4PortGroupId matches this value are ipSecL4Port whose ipSecL4PortGroupId matches this value are
included. included.
A value of zero indicates wildcard port, i.e., any port number A value of zero indicates wildcard port, i.e., any port number
matches." matches."
Li, et al Expires February, 2003 63 Li, et al Expires June 2003 63
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
::= { ipSecSelectorEntry 5 } ::= { ipSecSelectorEntry 5 }
ipSecSelectorProtocol OBJECT-TYPE ipSecSelectorProtocol OBJECT-TYPE
SYNTAX INTEGER (0..255) SYNTAX INTEGER (0..255)
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Specifies IP protocol to match against a packet's protocol. A "Specifies IP protocol to match against a packet's protocol. A
value of zero indicates wildcard protocol, i.e., any protocol value of zero indicates wildcard protocol, i.e., any protocol
matches." matches."
skipping to change at line 3648 skipping to change at line 3594
::= { ipSecSelector 3 } ::= { ipSecSelector 3 }
ipSecAddressEntry OBJECT-TYPE ipSecAddressEntry OBJECT-TYPE
SYNTAX IpSecAddressEntry SYNTAX IpSecAddressEntry
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Specifies an instance of this class" "Specifies an instance of this class"
PIB-INDEX { ipSecAddressPrid } PIB-INDEX { ipSecAddressPrid }
UNIQUENESS { UNIQUENESS {
Li, et al Expires February, 2003 64 Li, et al Expires June 2003 64
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
ipSecAddressAddressType, ipSecAddressAddressType,
ipSecAddressAddrMask, ipSecAddressAddrMask,
ipSecAddressAddrMin, ipSecAddressAddrMin,
ipSecAddressAddrMax, ipSecAddressAddrMax,
ipSecAddressGroupId ipSecAddressGroupId
} }
::= { ipSecAddressTable 1 } ::= { ipSecAddressTable 1 }
IpSecAddressEntry ::= SEQUENCE { IpSecAddressEntry ::= SEQUENCE {
skipping to change at line 3706 skipping to change at line 3651
ipSecAddressAddrMask OBJECT-TYPE ipSecAddressAddrMask OBJECT-TYPE
SYNTAX OCTET STRING SYNTAX OCTET STRING
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A mask for the matching of the IP address. A zero bit in the mask "A mask for the matching of the IP address. A zero bit in the mask
means that the corresponding bit in the address always matches. means that the corresponding bit in the address always matches.
This attribute MUST be ignored when ipSecAddressAddressType is not This attribute MUST be ignored when ipSecAddressAddressType is not
of IPv4 or IPv6 type." of IPv4 or IPv6 type."
Li, et al Expires February, 2003 65 Li, et al Expires June 2003 65
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
::= { ipSecAddressEntry 3 } ::= { ipSecAddressEntry 3 }
ipSecAddressAddrMin OBJECT-TYPE ipSecAddressAddrMin OBJECT-TYPE
SYNTAX OCTET STRING SYNTAX OCTET STRING
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Specifies an IP address. " "Specifies an IP address. "
::= { ipSecAddressEntry 4 } ::= { ipSecAddressEntry 4 }
skipping to change at line 3763 skipping to change at line 3707
SYNTAX IpSecL4PortEntry SYNTAX IpSecL4PortEntry
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Specifies an instance of this class" "Specifies an instance of this class"
PIB-INDEX { ipSecL4PortPrid } PIB-INDEX { ipSecL4PortPrid }
UNIQUENESS { UNIQUENESS {
ipSecL4PortPortMin, ipSecL4PortPortMin,
ipSecL4PortPortMax, ipSecL4PortPortMax,
ipSecL4PortGroupId ipSecL4PortGroupId
Li, et al Expires February, 2003 66 Li, et al Expires June 2003 66
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
} }
::= { ipSecL4PortTable 1 } ::= { ipSecL4PortTable 1 }
IpSecL4PortEntry ::= SEQUENCE { IpSecL4PortEntry ::= SEQUENCE {
ipSecL4PortPrid InstanceId, ipSecL4PortPrid InstanceId,
ipSecL4PortPortMin Unsigned16, ipSecL4PortPortMin Unsigned16,
ipSecL4PortPortMax Unsigned16, ipSecL4PortPortMax Unsigned16,
ipSecL4PortGroupId TagId ipSecL4PortGroupId TagId
} }
skipping to change at line 3820 skipping to change at line 3763
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Specifies the group this port or port range belongs to." "Specifies the group this port or port range belongs to."
::= { ipSecL4PortEntry 4 } ::= { ipSecL4PortEntry 4 }
-- --
-- --
-- The ipSecIpsoFilterSetTable -- The ipSecIpsoFilterSetTable
-- --
Li, et al Expires February, 2003 67 Li, et al Expires June 2003 67
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
ipSecIpsoFilterSetTable OBJECT-TYPE ipSecIpsoFilterSetTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpSecIpsoFilterSetEntry SYNTAX SEQUENCE OF IpSecIpsoFilterSetEntry
PIB-ACCESS install PIB-ACCESS install
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Specifies IPSO filter sets." "Specifies IPSO filter sets."
::= { ipSecSelector 5 } ::= { ipSecSelector 5 }
ipSecIpsoFilterSetEntry OBJECT-TYPE ipSecIpsoFilterSetEntry OBJECT-TYPE
skipping to change at line 3876 skipping to change at line 3818
::= { ipSecIpsoFilterSetEntry 2 } ::= { ipSecIpsoFilterSetEntry 2 }
ipSecIpsoFilterSetFilterId OBJECT-TYPE ipSecIpsoFilterSetFilterId OBJECT-TYPE
SYNTAX ReferenceId SYNTAX ReferenceId
PIB-REFERENCES {ipSecIpsoFilterEntry } PIB-REFERENCES {ipSecIpsoFilterEntry }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A pointer to a valid instance in the ipSecIpsoFilterTable." "A pointer to a valid instance in the ipSecIpsoFilterTable."
::= { ipSecIpsoFilterSetEntry 3 } ::= { ipSecIpsoFilterSetEntry 3 }
Li, et al Expires February, 2003 68 Li, et al Expires June 2003 68
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
ipSecIpsoFilterSetOrder OBJECT-TYPE ipSecIpsoFilterSetOrder OBJECT-TYPE
SYNTAX Unsigned16 SYNTAX Unsigned16
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An integer that specifies the precedence order of the filter "An integer that specifies the precedence order of the filter
identified by ipSecIpsoFilterSetFilterId within a filter set. The identified by ipSecIpsoFilterSetFilterId within a filter set. The
filter set is identified by ipSecIpsoFilterSetFilterSetId. A filter set is identified by ipSecIpsoFilterSetFilterSetId. A
smaller integer value indicates a higher preference." smaller integer value indicates a higher preference."
::= { ipSecIpsoFilterSetEntry 4 } ::= { ipSecIpsoFilterSetEntry 4 }
skipping to change at line 3933 skipping to change at line 3874
ipSecIpsoFilterPrid OBJECT-TYPE ipSecIpsoFilterPrid OBJECT-TYPE
SYNTAX InstanceId SYNTAX InstanceId
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An integer index that uniquely identifies an instance of this "An integer index that uniquely identifies an instance of this
class." class."
::= { ipSecIpsoFilterEntry 1 } ::= { ipSecIpsoFilterEntry 1 }
ipSecIpsoFilterMatchConditionType OBJECT-TYPE ipSecIpsoFilterMatchConditionType OBJECT-TYPE
Li, et al Expires February, 2003 69 Li, et al Expires June 2003 69
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
SYNTAX INTEGER { SYNTAX INTEGER {
classificationLevel(1), classificationLevel(1),
protectionAuthority(2) protectionAuthority(2)
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Specifies the IPSO header field to be matched." "Specifies the IPSO header field to be matched."
::= { ipSecIpsoFilterEntry 2 } ::= { ipSecIpsoFilterEntry 2 }
skipping to change at line 3990 skipping to change at line 3930
ipSecRuleTimePeriodTable OBJECT-TYPE ipSecRuleTimePeriodTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpSecRuleTimePeriodEntry SYNTAX SEQUENCE OF IpSecRuleTimePeriodEntry
PIB-ACCESS install PIB-ACCESS install
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Specifies the time periods during which a policy rule is valid. "Specifies the time periods during which a policy rule is valid.
The values of the first five attributes in a row are ANDed The values of the first five attributes in a row are ANDed
together to determine the validity period(s). If any of the five together to determine the validity period(s). If any of the five
Li, et al Expires February, 2003 70 Li, et al Expires June 2003 70
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
attributes is not present, it is treated as having value always attributes is not present, it is treated as having value always
enabled. " enabled. "
::= { ipSecPolicyTimePeriod 1 } ::= { ipSecPolicyTimePeriod 1 }
ipSecRuleTimePeriodEntry OBJECT-TYPE ipSecRuleTimePeriodEntry OBJECT-TYPE
SYNTAX IpSecRuleTimePeriodEntry SYNTAX IpSecRuleTimePeriodEntry
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Specifies an instance of this class" "Specifies an instance of this class"
skipping to change at line 4048 skipping to change at line 3987
representing a starting date and time, in which the character 'T' representing a starting date and time, in which the character 'T'
indicates the beginning of the time portion, followed by the indicates the beginning of the time portion, followed by the
solidus character '/', followed by a similar string representing solidus character '/', followed by a similar string representing
an end date and time. The first date indicates the beginning of an end date and time. The first date indicates the beginning of
the range, while the second date indicates the end. Thus, the the range, while the second date indicates the end. Thus, the
second date and time must be later than the first. Date/times are second date and time must be later than the first. Date/times are
expressed as substrings of the form yyyymmddThhmmss. expressed as substrings of the form yyyymmddThhmmss.
There are also two special cases: There are also two special cases:
Li, et al Expires February, 2003 71 Li, et al Expires June 2003 71
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
- If the first date/time is replaced with the string - If the first date/time is replaced with the string
THISANDPRIOR, then the property indicates that a policy rule is THISANDPRIOR, then the property indicates that a policy rule is
valid [from now] until the date/time that appears after the '/'. valid [from now] until the date/time that appears after the '/'.
- If the second date/time is replaced with the string - If the second date/time is replaced with the string
THISANDFUTURE, then the property indicates that a policy rule THISANDFUTURE, then the property indicates that a policy rule
becomes valid on the date/time that appears before the '/', and becomes valid on the date/time that appears before the '/', and
remains valid from that point on. remains valid from that point on.
" "
skipping to change at line 4105 skipping to change at line 4043
the month counting from the beginning, followed by 31 more bits the month counting from the beginning, followed by 31 more bits
identifying the days of the month counting from the end, followed identifying the days of the month counting from the end, followed
by 2 bits that are always set to '0'. For each day, the value '1' by 2 bits that are always set to '0'. For each day, the value '1'
indicates that the policy is valid for that day, and the value '0' indicates that the policy is valid for that day, and the value '0'
indicates that it is not valid. indicates that it is not valid.
For months with fewer than 31 days, the digits corresponding to For months with fewer than 31 days, the digits corresponding to
days that the months do not have (counting in both directions) are days that the months do not have (counting in both directions) are
ignored. ignored.
Li, et al Expires February, 2003 72 Li, et al Expires June 2003 72
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
" "
::= { ipSecRuleTimePeriodEntry 4 } ::= { ipSecRuleTimePeriodEntry 4 }
ipSecRuleTimePeriodDayOfWeekMask OBJECT-TYPE ipSecRuleTimePeriodDayOfWeekMask OBJECT-TYPE
SYNTAX OCTET STRING SYNTAX OCTET STRING
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An octet string that specifies which days of the week the policy "An octet string that specifies which days of the week the policy
is valid for. The octet string is structured as follows: is valid for. The octet string is structured as follows:
skipping to change at line 4162 skipping to change at line 4099
ipSecRuleTimePeriodLocalOrUtcTime OBJECT-TYPE ipSecRuleTimePeriodLocalOrUtcTime OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
localTime(1), localTime(1),
utcTime(2) utcTime(2)
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This property indicates whether the times represented in this "This property indicates whether the times represented in this
table represent local times or UTC times. There is no provision table represent local times or UTC times. There is no provision
Li, et al Expires February, 2003 73 Li, et al Expires June 2003 73
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
for mixing of local times and UTC times: the value of this for mixing of local times and UTC times: the value of this
property applies to all of the other time-related properties." property applies to all of the other time-related properties."
::= { ipSecRuleTimePeriodEntry 7 } ::= { ipSecRuleTimePeriodEntry 7 }
-- --
-- --
-- The ipSecRuleTimePeriodSetTable -- The ipSecRuleTimePeriodSetTable
-- --
skipping to change at line 4218 skipping to change at line 4154
"An integer index to uniquely identify an instance of this class" "An integer index to uniquely identify an instance of this class"
::= { ipSecRuleTimePeriodSetEntry 1 } ::= { ipSecRuleTimePeriodSetEntry 1 }
ipSecRuleTimePeriodSetRuleTimePeriodSetId OBJECT-TYPE ipSecRuleTimePeriodSetRuleTimePeriodSetId OBJECT-TYPE
SYNTAX TagId SYNTAX TagId
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An integer that uniquely identifies an ipSecRuleTimePeriod set. " "An integer that uniquely identifies an ipSecRuleTimePeriod set. "
::= { ipSecRuleTimePeriodSetEntry 2 } ::= { ipSecRuleTimePeriodSetEntry 2 }
Li, et al Expires February, 2003 74 Li, et al Expires June 2003 74
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
ipSecRuleTimePeriodSetRuleTimePeriodId OBJECT-TYPE ipSecRuleTimePeriodSetRuleTimePeriodId OBJECT-TYPE
SYNTAX ReferenceId SYNTAX ReferenceId
PIB-REFERENCES {ipSecRuleTimePeriodEntry } PIB-REFERENCES {ipSecRuleTimePeriodEntry }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An integer that identifies an ipSecRuleTimePeriod, specified by "An integer that identifies an ipSecRuleTimePeriod, specified by
ipSecRuleTimePeriodPrid in the ipSecRuleTimePeriodTable, that is ipSecRuleTimePeriodPrid in the ipSecRuleTimePeriodTable, that is
included in this set." included in this set."
::= { ipSecRuleTimePeriodSetEntry 3 } ::= { ipSecRuleTimePeriodSetEntry 3 }
skipping to change at line 4244 skipping to change at line 4179
-- The ipSecIfCapsTable -- The ipSecIfCapsTable
-- --
ipSecIfCapsTable OBJECT-TYPE ipSecIfCapsTable OBJECT-TYPE
SYNTAX SEQUENCE OF IpSecIfCapsEntry SYNTAX SEQUENCE OF IpSecIfCapsEntry
PIB-ACCESS notify PIB-ACCESS notify
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Specifies capabilities that may be associated with an interface "Specifies capabilities that may be associated with an interface
of a specific type. The instances of this table are referenced by of a specific type. The instances of this table are referenced by
the frwkIfCapSetCapability attribute of the frwkIfCapSetTable [FR- the frwkCapabilitySetCapability attribute of the
PIB]." frwkCapabilitySetTable [9]."
::= { ipSecIfCapability 1 } ::= { ipSecIfCapability 1 }
ipSecIfCapsEntry OBJECT-TYPE ipSecIfCapsEntry OBJECT-TYPE
SYNTAX IpSecIfCapsEntry SYNTAX IpSecIfCapsEntry
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Specifies an instance of this class" "Specifies an instance of this class"
PIB-INDEX { ipSecIfCapsPrid } PIB-INDEX { ipSecIfCapsPrid }
UNIQUENESS { UNIQUENESS {
ipSecIfCapsDirection, ipSecIfCapsDirection,
skipping to change at line 4275 skipping to change at line 4210
ipSecIfCapsMaxIkeActions Unsigned16 ipSecIfCapsMaxIkeActions Unsigned16
} }
ipSecIfCapsPrid OBJECT-TYPE ipSecIfCapsPrid OBJECT-TYPE
SYNTAX InstanceId SYNTAX InstanceId
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"An integer index that uniquely identifies an instance of this "An integer index that uniquely identifies an instance of this
class." class."
Li, et al Expires February, 2003 75 Li, et al Expires June 2003 75
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
::= { ipSecIfCapsEntry 1 } ::= { ipSecIfCapsEntry 1 }
ipSecIfCapsDirection OBJECT-TYPE ipSecIfCapsDirection OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
in(1), in(1),
out(2), out(2),
bi-directional(3) bi-directional(3)
} }
STATUS current STATUS current
skipping to change at line 4325 skipping to change at line 4259
-- --
-- Conformance Section -- Conformance Section
-- --
ipSecPolicyPibConformanceCompliances ipSecPolicyPibConformanceCompliances
OBJECT IDENTIFIER ::= { ipSecPolicyPibConformance 1 } OBJECT IDENTIFIER ::= { ipSecPolicyPibConformance 1 }
ipSecPolicyPibConformanceGroups ipSecPolicyPibConformanceGroups
OBJECT IDENTIFIER ::= { ipSecPolicyPibConformance 2 } OBJECT IDENTIFIER ::= { ipSecPolicyPibConformance 2 }
IPsecPibCompilance MODULE-COMPLIANCE ipSecPolicyPibCompliance MODULE-COMPLIANCE
STATUS current STATUS current
DESCRIPTION DESCRIPTION
" Compliance statement" " Compliance statement"
MODULE ű- this module MODULE --this module
MANDATORY-GROUPS { MANDATORY-GROUPS {
Li, et al Expires February, 2003 76 Li, et al Expires June 2003 76
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
ipSecRuleGroup, ipSecRuleGroup,
ipSecActionSetGroup, ipSecActionSetGroup,
ipSecStaticActionGroup, ipSecStaticActionGroup,
ipSecNegotiationActionGroup, ipSecNegotiationActionGroup,
ipSecAssociationGroup, ipSecAssociationGroup,
ipSecProposalSetGroup, ipSecProposalSetGroup,
ipSecProposalGroup, ipSecProposalGroup,
ipSecAhTransformSetGroup, ipSecAhTransformSetGroup,
ipSecAhTransformGroup, ipSecAhTransformGroup,
skipping to change at line 4390 skipping to change at line 4323
DESCRIPTION DESCRIPTION
"This group is mandatory if IPSO filter is supported." "This group is mandatory if IPSO filter is supported."
GROUP ipSecIpsoFilterGroup GROUP ipSecIpsoFilterGroup
DESCRIPTION DESCRIPTION
"This group is mandatory if IPSO filter is supported." "This group is mandatory if IPSO filter is supported."
GROUP ipSecRuleTimePeriodGroup GROUP ipSecRuleTimePeriodGroup
DESCRIPTION DESCRIPTION
Li, et al Expires February, 2003 77 Li, et al Expires June 2003 77
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
"This group is mandatory if policy scheduling is supported." "This group is mandatory if policy scheduling is supported."
GROUP ipSecRuleTimePeriodSetGroup GROUP ipSecRuleTimePeriodSetGroup
DESCRIPTION DESCRIPTION
"This group is mandatory if policy scheduling is supported." "This group is mandatory if policy scheduling is supported."
OBJECT ipSecRuleipSecIpsoFilterSetId OBJECT ipSecRuleIpSecIpsoFilterSetId
PIB-MIN-ACCESS not-accessible PIB-MIN-ACCESS not-accessible
DESCRIPTION DESCRIPTION
" Support of this attribute is optional" " Support of this attribute is optional"
OBJECT ipSecRuleLimitNegotiation OBJECT ipSecRuleLimitNegotiation
PIB-MIN-ACCESS not-accessible PIB-MIN-ACCESS not-accessible
DESCRIPTION DESCRIPTION
" Support of this attribute is optional" " Support of this attribute is optional"
OBJECT ipSecRuleAutoStart OBJECT ipSecRuleAutoStart
skipping to change at line 4448 skipping to change at line 4380
" Support of this attribute is optional" " Support of this attribute is optional"
OBJECT ipSecAssociationIdleDurationSeconds OBJECT ipSecAssociationIdleDurationSeconds
PIB-MIN-ACCESS not-accessible PIB-MIN-ACCESS not-accessible
DESCRIPTION DESCRIPTION
" Support of this attribute is optional" " Support of this attribute is optional"
OBJECT ipSecAssociationVendorId OBJECT ipSecAssociationVendorId
PIB-MIN-ACCESS not-accessible PIB-MIN-ACCESS not-accessible
Li, et al Expires February, 2003 78 Li, et al Expires June 2003 78
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
DESCRIPTION DESCRIPTION
" Support of this attribute is optional" " Support of this attribute is optional"
OBJECT ipSecAssociationUseKeyExchangeGroup OBJECT ipSecAssociationUseKeyExchangeGroup
PIB-MIN-ACCESS not-accessible PIB-MIN-ACCESS not-accessible
DESCRIPTION DESCRIPTION
" Support of this attribute is optional" " Support of this attribute is optional"
OBJECT ipSecAssociationGranularity OBJECT ipSecAssociationGranularity
skipping to change at line 4505 skipping to change at line 4436
OBJECT ipSecEspTransformReplayPreventionWindowSize OBJECT ipSecEspTransformReplayPreventionWindowSize
PIB-MIN-ACCESS not-accessible PIB-MIN-ACCESS not-accessible
DESCRIPTION DESCRIPTION
" Support of this attribute is optional" " Support of this attribute is optional"
OBJECT ipSecEspTransformVendorId OBJECT ipSecEspTransformVendorId
PIB-MIN-ACCESS not-accessible PIB-MIN-ACCESS not-accessible
DESCRIPTION DESCRIPTION
" Support of this attribute is optional" " Support of this attribute is optional"
Li, et al Expires February, 2003 79 Li, et al Expires June 2003 79
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
OBJECT ipSecCompTransformDictionarySize OBJECT ipSecCompTransformDictionarySize
PIB-MIN-ACCESS not-accessible PIB-MIN-ACCESS not-accessible
DESCRIPTION DESCRIPTION
" Support of this attribute is optional" " Support of this attribute is optional"
OBJECT ipSecCompTransformPrivateAlgorithm OBJECT ipSecCompTransformPrivateAlgorithm
PIB-MIN-ACCESS not-accessible PIB-MIN-ACCESS not-accessible
DESCRIPTION DESCRIPTION
" Support of this attribute is optional" " Support of this attribute is optional"
skipping to change at line 4563 skipping to change at line 4493
OBJECT ipSecIkeAssociationLocalCredentialId OBJECT ipSecIkeAssociationLocalCredentialId
PIB-MIN-ACCESS not-accessible PIB-MIN-ACCESS not-accessible
DESCRIPTION DESCRIPTION
" Support of this attribute is optional" " Support of this attribute is optional"
OBJECT ipSecIkeAssociationDoActionLogging OBJECT ipSecIkeAssociationDoActionLogging
PIB-MIN-ACCESS not-accessible PIB-MIN-ACCESS not-accessible
DESCRIPTION DESCRIPTION
Li, et al Expires February, 2003 80 Li, et al Expires June 2003 80
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
" Support of this attribute is optional" " Support of this attribute is optional"
OBJECT ipSecIkeProposalPrfAlgorithm OBJECT ipSecIkeProposalPrfAlgorithm
PIB-MIN-ACCESS not-accessible PIB-MIN-ACCESS not-accessible
DESCRIPTION DESCRIPTION
" Support of this attribute is optional" " Support of this attribute is optional"
OBJECT ipSecIkeProposalVendorId OBJECT ipSecIkeProposalVendorId
PIB-MIN-ACCESS not-accessible PIB-MIN-ACCESS not-accessible
skipping to change at line 4619 skipping to change at line 4548
" Support of ikeRejection(3) is not required" " Support of ikeRejection(3) is not required"
::= { ipSecPolicyPibConformanceCompliances 1 } ::= { ipSecPolicyPibConformanceCompliances 1 }
ipSecRuleGroup OBJECT-GROUP ipSecRuleGroup OBJECT-GROUP
OBJECTS { OBJECTS {
ipSecRuleIfName, ipSecRuleIfName,
ipSecRuleRoles, ipSecRuleRoles,
ipSecRuleDirection, ipSecRuleDirection,
ipSecRuleIpSecSelectorSetId, ipSecRuleIpSecSelectorSetId,
ipSecRuleipSecIpsoFilterSetId, ipSecRuleIpSecIpsoFilterSetId,
Li, et al Expires February, 2003 81
IPsec Policy Information Base August, 2002 Li, et al Expires June 2003 81
IPsec Policy Information Base November 2002
ipSecRuleIpSecActionSetId, ipSecRuleIpSecActionSetId,
ipSecRuleActionExecutionStrategy, ipSecRuleActionExecutionStrategy,
ipSecRuleOrder, ipSecRuleOrder,
ipSecRuleLimitNegotiation, ipSecRuleLimitNegotiation,
ipSecRuleAutoStart, ipSecRuleAutoStart,
ipSecRuleIpSecRuleTimePeriodGroupId ipSecRuleIpSecRuleTimePeriodGroupId
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
skipping to change at line 4678 skipping to change at line 4606
ipSecNegotiationActionTunnelEndpointId, ipSecNegotiationActionTunnelEndpointId,
ipSecNegotiationActionDfHandling, ipSecNegotiationActionDfHandling,
ipSecNegotiationActionIpSecSecurityAssociationId, ipSecNegotiationActionIpSecSecurityAssociationId,
ipSecNegotiationActionKeyExchangeId ipSecNegotiationActionKeyExchangeId
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Objects from the ipSecNegotiationActionTable." "Objects from the ipSecNegotiationActionTable."
::= { ipSecPolicyPibConformanceGroups 4 } ::= { ipSecPolicyPibConformanceGroups 4 }
Li, et al Expires February, 2003 82 Li, et al Expires June 2003 82
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
ipSecAssociationGroup OBJECT-GROUP ipSecAssociationGroup OBJECT-GROUP
OBJECTS { OBJECTS {
ipSecAssociationMinLifetimeSeconds, ipSecAssociationMinLifetimeSeconds,
ipSecAssociationMinLifetimeKilobytes, ipSecAssociationMinLifetimeKilobytes,
ipSecAssociationIdleDurationSeconds, ipSecAssociationIdleDurationSeconds,
ipSecAssociationUsePfs, ipSecAssociationUsePfs,
ipSecAssociationVendorId, ipSecAssociationVendorId,
ipSecAssociationUseKeyExchangeGroup, ipSecAssociationUseKeyExchangeGroup,
ipSecAssociationDhGroup, ipSecAssociationDhGroup,
skipping to change at line 4736 skipping to change at line 4663
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Objects from the ipSecAhTransformSetTable." "Objects from the ipSecAhTransformSetTable."
::= { ipSecPolicyPibConformanceGroups 8 } ::= { ipSecPolicyPibConformanceGroups 8 }
ipSecAhTransformGroup OBJECT-GROUP ipSecAhTransformGroup OBJECT-GROUP
OBJECTS { OBJECTS {
ipSecAhTransformTransformId, ipSecAhTransformTransformId,
Li, et al Expires February, 2003 83 Li, et al Expires June 2003 83
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
ipSecAhTransformIntegrityKey, ipSecAhTransformIntegrityKey,
ipSecAhTransformUseReplayPrevention, ipSecAhTransformUseReplayPrevention,
ipSecAhTransformReplayPreventionWindowSize, ipSecAhTransformReplayPreventionWindowSize,
ipSecAhTransformVendorId, ipSecAhTransformVendorId,
ipSecAhTransformMaxLifetimeSeconds, ipSecAhTransformMaxLifetimeSeconds,
ipSecAhTransformMaxLifetimeKilobytes ipSecAhTransformMaxLifetimeKilobytes
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
skipping to change at line 4793 skipping to change at line 4719
OBJECTS { OBJECTS {
ipSecCompTransformSetTransformSetId, ipSecCompTransformSetTransformSetId,
ipSecCompTransformSetTransformId, ipSecCompTransformSetTransformId,
ipSecCompTransformSetOrder ipSecCompTransformSetOrder
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Objects from the ipSecCompTransformSetTable." "Objects from the ipSecCompTransformSetTable."
::= { ipSecPolicyPibConformanceGroups 12 } ::= { ipSecPolicyPibConformanceGroups 12 }
Li, et al Expires February, 2003 84 Li, et al Expires June 2003 84
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
ipSecCompTransformGroup OBJECT-GROUP ipSecCompTransformGroup OBJECT-GROUP
OBJECTS { OBJECTS {
ipSecCompTransformAlgorithm, ipSecCompTransformAlgorithm,
ipSecCompTransformDictionarySize, ipSecCompTransformDictionarySize,
ipSecCompTransformPrivateAlgorithm, ipSecCompTransformPrivateAlgorithm,
ipSecCompTransformVendorId, ipSecCompTransformVendorId,
ipSecCompTransformMaxLifetimeSeconds, ipSecCompTransformMaxLifetimeSeconds,
ipSecCompTransformMaxLifetimeKilobytes ipSecCompTransformMaxLifetimeKilobytes
} }
skipping to change at line 4851 skipping to change at line 4776
ipSecIkeAssociationIdleDurationSeconds, ipSecIkeAssociationIdleDurationSeconds,
ipSecIkeAssociationExchangeMode, ipSecIkeAssociationExchangeMode,
ipSecIkeAssociationUseIkeIdentityType, ipSecIkeAssociationUseIkeIdentityType,
ipSecIkeAssociationUseIkeIdentityValue, ipSecIkeAssociationUseIkeIdentityValue,
ipSecIkeAssociationIkePeerEndpoint, ipSecIkeAssociationIkePeerEndpoint,
ipSecIkeAssociationPresharedKey, ipSecIkeAssociationPresharedKey,
ipSecIkeAssociationVendorId, ipSecIkeAssociationVendorId,
ipSecIkeAssociationAggressiveModeGroupId, ipSecIkeAssociationAggressiveModeGroupId,
ipSecIkeAssociationLocalCredentialId, ipSecIkeAssociationLocalCredentialId,
Li, et al Expires February, 2003 85 Li, et al Expires June 2003 85
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
ipSecIkeAssociationDoActionLogging, ipSecIkeAssociationDoActionLogging,
ipSecIkeAssociationIkeProposalSetId ipSecIkeAssociationIkeProposalSetId
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Objects from the ipSecIkeAssociationTable." "Objects from the ipSecIkeAssociationTable."
::= { ipSecPolicyPibConformanceGroups 16 } ::= { ipSecPolicyPibConformanceGroups 16 }
ipSecIkeProposalSetGroup OBJECT-GROUP ipSecIkeProposalSetGroup OBJECT-GROUP
skipping to change at line 4909 skipping to change at line 4833
DESCRIPTION DESCRIPTION
"Objects from the ipSecIkePeerEndpointTable." "Objects from the ipSecIkePeerEndpointTable."
::= { ipSecPolicyPibConformanceGroups 19 } ::= { ipSecPolicyPibConformanceGroups 19 }
ipSecCredentialSetGroup OBJECT-GROUP ipSecCredentialSetGroup OBJECT-GROUP
OBJECTS { OBJECTS {
ipSecCredentialSetSetId, ipSecCredentialSetSetId,
ipSecCredentialSetCredentialId ipSecCredentialSetCredentialId
} }
Li, et al Expires February, 2003 86 Li, et al Expires June 2003 86
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Objects from the ipSecCredentialSetTable." "Objects from the ipSecCredentialSetTable."
::= { ipSecPolicyPibConformanceGroups 20 } ::= { ipSecPolicyPibConformanceGroups 20 }
ipSecCredentialGroup OBJECT-GROUP ipSecCredentialGroup OBJECT-GROUP
OBJECTS { OBJECTS {
ipSecCredentialCredentialType, ipSecCredentialCredentialType,
ipSecCredentialFieldsId, ipSecCredentialFieldsId,
skipping to change at line 4966 skipping to change at line 4889
ipSecSelectorDstPortGroupId, ipSecSelectorDstPortGroupId,
ipSecSelectorProtocol, ipSecSelectorProtocol,
ipSecSelectorDscp, ipSecSelectorDscp,
ipSecSelectorFlowLabel ipSecSelectorFlowLabel
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Objects from the ipSecSelectorTable." "Objects from the ipSecSelectorTable."
::= { ipSecPolicyPibConformanceGroups 24 } ::= { ipSecPolicyPibConformanceGroups 24 }
Li, et al Expires February, 2003 87 Li, et al Expires June 2003 87
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
ipSecAddressGroup OBJECT-GROUP ipSecAddressGroup OBJECT-GROUP
OBJECTS { OBJECTS {
ipSecAddressAddressType, ipSecAddressAddressType,
ipSecAddressAddrMask, ipSecAddressAddrMask,
ipSecAddressAddrMin, ipSecAddressAddrMin,
ipSecAddressAddrMax, ipSecAddressAddrMax,
ipSecAddressGroupId ipSecAddressGroupId
} }
STATUS current STATUS current
skipping to change at line 5024 skipping to change at line 4946
::= { ipSecPolicyPibConformanceGroups 28 } ::= { ipSecPolicyPibConformanceGroups 28 }
ipSecRuleTimePeriodGroup OBJECT-GROUP ipSecRuleTimePeriodGroup OBJECT-GROUP
OBJECTS { OBJECTS {
ipSecRuleTimePeriodTimePeriod, ipSecRuleTimePeriodTimePeriod,
ipSecRuleTimePeriodMonthOfYearMask, ipSecRuleTimePeriodMonthOfYearMask,
ipSecRuleTimePeriodDayOfMonthMask, ipSecRuleTimePeriodDayOfMonthMask,
ipSecRuleTimePeriodDayOfWeekMask, ipSecRuleTimePeriodDayOfWeekMask,
ipSecRuleTimePeriodTimeOfDayMask, ipSecRuleTimePeriodTimeOfDayMask,
Li, et al Expires February, 2003 88 Li, et al Expires June 2003 88
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
ipSecRuleTimePeriodLocalOrUtcTime ipSecRuleTimePeriodLocalOrUtcTime
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Objects from the ipSecRuleTimePeriodTable." "Objects from the ipSecRuleTimePeriodTable."
::= { ipSecPolicyPibConformanceGroups 29 } ::= { ipSecPolicyPibConformanceGroups 29 }
ipSecRuleTimePeriodSetGroup OBJECT-GROUP ipSecRuleTimePeriodSetGroup OBJECT-GROUP
OBJECTS { OBJECTS {
skipping to change at line 5060 skipping to change at line 4981
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Objects from the ipSecIfCapsTable." "Objects from the ipSecIfCapsTable."
::= { ipSecPolicyPibConformanceGroups 31 } ::= { ipSecPolicyPibConformanceGroups 31 }
END END
6. Security Considerations 6. Security Considerations
This document defines an IPsec PIB for configuring IPsec policies on
IPsec enabled devices. As IPsec provides security services, it is
critical that IPsec configuration data be protected at least as
strongly as the desired IPsec policy.
The ipSecEspTransformTable, ipSecAhTransformTable contain
authentication and encryption keys for static IPsec security
associations. These two attributes are ignored for IPsec security
associations that are dynamically established. The
ipSecIkeAssociationTable contains an optional pre-shared key for IKE
authentication. Malicious access of the above PRCs can compromise
the keys. As a result, they MUST NOT be observed by third parties.
In addition, the PRCs in this PIB may contain information that may
be sensitive from a business perspective, in that they may represent
a customer's service contract or the filters that the service
provider chooses to apply to a customer's traffic. All the tables
except the ipSecIfCapsTable have a PIB-ACCESS clause of install.
Malicious altering of the these PRCs may affect the IPsec behavior
of the device being provisioned. Malicious access of the above PRCs
Li, et al Expires June 2003 89
IPsec Policy Information Base November 2002
also exposes policy information concerning how the device is
provisioned.
The ipSecIfCapsTable has a PIB-ACCESS clause of notify. Malicious
access of the this PRC exposes information concerning the device
being provisioned.
The authentication and integrity of configuration information is of The authentication and integrity of configuration information is of
utmost importance to the security of a network. Administrators utmost importance to the security of a network. Administrators
SHOULD carefully consider the potential threat environment involving SHOULD carefully consider the potential threat environment involving
PDP and PEP data exchange. At a minimum, PDP's and PEP's SHOULD PDP and PEP data exchange. At a minimum, PDP's and PEP's SHOULD
authenticate one another and SHOULD use a transport protocol that authenticate one another and SHOULD use a transport protocol that
supports data integrity and authentication. Administrators SHOULD supports data integrity and authentication. Administrators SHOULD
also carefully consider the importance of confidentiality of their also carefully consider the importance of confidentiality of their
configuration information, because it may reveal private or configuration information, because it may reveal private or
confidential information about customer access, business confidential information about customer access, business
relationships, etc. If these are concerns to the organization, then relationships, keys, etc. If these are concerns to the
confidentiality SHOULD be used to transport the information. organization, then confidentiality SHOULD be used to transport the
information. Administrators SHOULD use IPSEC or TLS between PDP and
PEP as described in [5] and [15] to provide necessary protections.
7. References 7. RFC Editor Considerations
This document normatively references [9][12]which are in the IESG
last call stage. Please use the corresponding RFC numbers prior to
publishing of this document as a RFC.
8. IANA Considerations
This document describes the ipSecPolicyPib Policy Information Base
(PIB) modules for standardization under the "pib" branch registered
with IANA. An IANA assigned PIB number is requested for it under the
"pib" branch.
IANA Considerations for SUBJECT-CATEGORIES follow the same
requirements as specified in [5] IANA Considerations for COPS Client
Types. The IPsec PIB defines a new COPS Client Type in the Standards
space, hence that needs a COPS client type assignment from IANA (as
described in [5] IANA Considerations). IANA must also update the
registry for COPS Client Types as a result.
9. Normative References
1 Bradner, S., "The Internet Standards Process -- Revision 3", BCP 1 Bradner, S., "The Internet Standards Process -- Revision 3", BCP
9, RFC 2026, October 1996. 9, RFC 2026, October 1996.
2 Bradner, S., "Key words for use in RFCs to Indicate Requirement 2 Bradner, S., "Key words for use in RFCs to Indicate Requirement
Levels", BCP 14, RFC 2119, March 1997 Levels", BCP 14, RFC 2119, March 1997
Li, et al Expires February, 2003 89 Li, et al Expires June 2003 90
IPsec Policy Information Base November 2002
IPsec Policy Information Base August, 2002
3. S. Kent, R. Atkinson, "IP Authentication Header", RFC 2402, 3. S. Kent, R. Atkinson, "IP Authentication Header", RFC 2402,
November 1998. November 1998.
4. F. Dawson, D. Stenerson, "Internet Calendaring and Scheduling 4. F. Dawson, D. Stenerson, "Internet Calendaring and Scheduling
Core Object Specification (iCalendar)", RFC 2445, November 1998. Core Object Specification (iCalendar)", RFC 2445, November 1998.
5. J. Boyle, R. Cohen, D. Durham, S. Herzog, R. Rajan, A. Sastry, 5. J. Boyle, R. Cohen, D. Durham, S. Herzog, R. Rajan, A. Sastry,
"The COPS (Common Open Policy Service) Protocol" RFC 2748, January "The COPS (Common Open Policy Service) Protocol", RFC 2748,
2000. January 2000.
6. K. Chan, D. Durham, S. Gai, S. Herzog, K. McCloghrie, F. 6. K. Chan, D. Durham, S. Gai, S. Herzog, K. McCloghrie, F.
Reichmeyer, J. Seligson, A. Smith, R. Yavatkar, "COPS Usage for Reichmeyer, J. Seligson, A. Smith, R. Yavatkar, "COPS Usage for
Policy Provisioning," RFC 3084, March 2001. Policy Provisioning", RFC 3084, March 2001.
7. D. Piper, "The Internet IP Security Domain of Interpretation 7. D. Piper, "The Internet IP Security Domain of Interpretation
for ISAKMP", RFC 2407, November 1998. for ISAKMP", RFC 2407, November 1998.
8. S. Kent, R. Atkinson, "IP Encapsulating Security Payload 8. S. Kent, R. Atkinson, "IP Encapsulating Security Payload
(ESP)", RFC 2406, November 1998. (ESP)", RFC 2406, November 1998.
9. M. Fine, K. McCloghrie, J. Seligson, K. Chan, S. Hahn, A. 9. M. Fine, K. McCloghrie, J. Seligson, K. Chan, S. Hahn, A.
Smith, F. Reichmeyer "Framework Policy Information Base", draft- Smith, F. Reichmeyer "Framework Policy Information Base", draft-
ietf-rap-frameworkpib-06.txt, November 2001. ietf-rap-frameworkpib-09.txt, June 2002.
10. D. Harkins, D. Carrel, "The Internet Key Exchange (IKE)", RFC 10. D. Harkins, D. Carrel, "The Internet Key Exchange (IKE)", RFC
2409, November 1998. 2409, November 1998.
11. A. Shacham, R. Monsour, R. Pereira, M. Thomas, "IP Payload 11. A. Shacham, R. Monsour, R. Pereira, M. Thomas, "IP Payload
Compression Protocol (IPComp)", RFC 2393, August 1998. Compression Protocol (IPComp)", RFC 2393, August 1998.
12. J. Jason, L. Rafalow, E. Vyncke ˘IPsec Configuration Policy 12. J. Jason, L. Rafalow, E. Vyncke "IPsec Configuration Policy
Model,÷ draft-ietf-ipsp-config-policy-model-04.txt, November 2001. Model", draft-ietf-ipsp-config-policy-model-06.txt, August 2002.
13. B. Moore, E. Ellesson, J. Strassner, ˘Policy Core Information 13. A. Westerinen, et al "Terminology for Policy-Based
Model -- Version 1 Specification÷, RFC 3060, February 2000. Management", RFC 3198, November 2001.
14. K. McCloghrie, M. Fine, J. Seligson, K. Chan, S. Chan, A. 14. K. McCloghrie, M. Fine, J. Seligson, K. Chan, S. Chan, A.
Smith, F. Reichmeyer, "Structure of Policy Provisioning Smith, F. Reichmeyer, "Structure of Policy Provisioning
Information," RFC 3159, August 2001. Information", RFC 3159, August 2001.
8. Author's Addresses 10. Informative References
15. J. Walker, A. Kulkarni, "COPS Over TLS", draft-ietf-rap-cops-
tls-04.txt, June 2002.
11. Author's Addresses
Man Li Man Li
Nokia Nokia
5 Wayside Road, 5 Wayside Road,
Burlington, MA 01803 Burlington, MA 01803
Phone: +1 781 993 3923 Phone: +1 781 993 3923
Email: man.m.li@nokia.com Email: man.m.li@nokia.com
Li, et al Expires June 2003 91
IPsec Policy Information Base November 2002
David Arneson David Arneson
Email: dla@mediaone.net Email: dla@mediaone.net
Li, et al Expires February, 2003 90
IPsec Policy Information Base August, 2002
Avri Doria Avri Doria
Div. of Computer Communications Div. of Computer Communications
Lulea University of Technology Lulea University of Technology
SE-971 87 SE-971 87
Lulea, Sweden Lulea, Sweden
Phone: +46 920 49 3030 Phone: +46 920 49 3030
Email: avri@sm.luth.se Email: avri@sm.luth.se
Jamie Jason Jamie Jason
Intel Corporation Intel Corporation
skipping to change at line 5168 skipping to change at line 5145
Suite 300, 565 Metro Place South Suite 300, 565 Metro Place South
Dublin, OH 43017 Dublin, OH 43017
Phone: +1 614 923 6241 Phone: +1 614 923 6241
Email: CWang@smartpipes.com Email: CWang@smartpipes.com
Markus Stenberg Markus Stenberg
SSH Communications Security Corp. SSH Communications Security Corp.
Fredrikinkatu 42 Fredrikinkatu 42
FIN-00100 Helsinki, Finland FIN-00100 Helsinki, Finland
Phone: +358 20 500 7466 Phone: +358 20 500 7466
Email: markus.stenberg@ssh.com Email: fingon@iki.fi
9. Full Copyright Statement 12. Full Copyright Statement
Copyright (C) The Internet Society (date). All Rights Reserved.
"Copyright (C) The Internet Society (date). All Rights Reserved.
This document and translations of it may be copied and furnished This document and translations of it may be copied and furnished
to others, and derivative works that comment on or otherwise to others, and derivative works that comment on or otherwise
explain it or assist in its implementation may be prepared, explain it or assist in its implementation may be prepared,
copied, published and distributed, in whole or in part, without copied, published and distributed, in whole or in part, without
restriction of any kind, provided that the above copyright notice restriction of any kind, provided that the above copyright notice
and this paragraph are included on all such copies and derivative and this paragraph are included on all such copies and derivative
works. However, this document itself may not be modified in any works. However, this document itself may not be modified in any
way, such as by removing the copyright notice or references to the way, such as by removing the copyright notice or references to the
Internet Society or other Internet organizations, except as needed Internet Society or other Internet organizations, except as needed
for the purpose of developing Internet standards in which case the for the purpose of developing Internet standards in which case the
procedures for copyrights defined in the Internet Standards procedures for copyrights defined in the Internet Standards
process must be followed, or as required to translate it into. process must be followed, or as required to translate it into
languages other than English.
Li, et al Expires June 2003 92
IPsec Policy Information Base November 2002
The limited permissions granted above are perpetual and will not
be revoked by the Internet Society or its successors or assigns.
This document and the information contained herein is provided on
an "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET
ENGINEERING TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF
THE INFORMATION HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Table of Contents Table of Contents
1. Introduction.......................................................2 1. Introduction.......................................................2
2. Operation Overview.................................................2 2. Operation Overview.................................................2
3. Structure of IPsec PIB.............................................3 3. Structure of IPsec PIB.............................................3
3.1 IPsec association group...........................................3 3.1 IPsec association group...........................................3
3.1.1 IPsec rules.....................................................3 3.1.1 IPsec rules.....................................................3
Li, et al Expires February, 2003 91
IPsec Policy Information Base August, 2002
3.1.2 IPsec actions...................................................4 3.1.2 IPsec actions...................................................4
3.1.3 IPsec associations..............................................5 3.1.3 IPsec associations..............................................5
3.1.4 IPsec proposals.................................................5 3.1.4 IPsec proposals.................................................5
3.2 AH transform group................................................5 3.2 AH transform group................................................5
3.3 ESP transform group...............................................5 3.3 ESP transform group...............................................5
3.4 COMP transform group..............................................5 3.4 COMP transform group..............................................5
3.5 IKE association group.............................................5 3.5 IKE association group.............................................5
3.6 Credential group..................................................6 3.6 Credential group..................................................6
3.7 Selector group....................................................7 3.7 Selector group....................................................7
3.8 Policy time period group..........................................8 3.8 Policy time period group..........................................8
skipping to change at line 5234 skipping to change at line 5221
4.4.1 ipSecCompTransformSetTable......................................9 4.4.1 ipSecCompTransformSetTable......................................9
4.4.2 ipSecCompTransformTable.........................................9 4.4.2 ipSecCompTransformTable.........................................9
4.5 ipSecIkeAssociation group.........................................9 4.5 ipSecIkeAssociation group.........................................9
4.5.1 ipSecIkeRuleTable...............................................9 4.5.1 ipSecIkeRuleTable...............................................9
4.5.2 ipSecIkeActionSetTable..........................................9 4.5.2 ipSecIkeActionSetTable..........................................9
4.5.3 ipSecIkeAssociationTable........................................9 4.5.3 ipSecIkeAssociationTable........................................9
4.5.4 ipSecIkeProposalSetTable........................................9 4.5.4 ipSecIkeProposalSetTable........................................9
4.5.5 ipSecIkeProposalTable...........................................9 4.5.5 ipSecIkeProposalTable...........................................9
4.5.6 ipSecIkePeerEndpointTable.......................................9 4.5.6 ipSecIkePeerEndpointTable.......................................9
4.6 ipSecCredential group............................................10 4.6 ipSecCredential group............................................10
Li, et al Expires June 2003 93
IPsec Policy Information Base November 2002
4.6.1 ipSecCredentialSetTable........................................10 4.6.1 ipSecCredentialSetTable........................................10
4.6.2 ipSecCredentialTable...........................................10 4.6.2 ipSecCredentialTable...........................................10
4.6.3 ipSecCredentialFieldsTable.....................................10 4.6.3 ipSecCredentialFieldsTable.....................................10
4.7 ipSecSelector group..............................................10 4.7 ipSecSelector group..............................................10
4.7.1 ipSecSelectorSetTable..........................................10 4.7.1 ipSecSelectorSetTable..........................................10
4.7.2 ipSecSelectorTable.............................................10 4.7.2 ipSecSelectorTable.............................................10
4.7.3 ipSecAddressTable..............................................10 4.7.3 ipSecAddressTable..............................................10
4.7.4 ipSecL4PortTable...............................................10 4.7.4 ipSecL4PortTable...............................................10
4.7.5 ipSecIpsoFilterSetTable........................................10 4.7.5 ipSecIpsoFilterSetTable........................................10
4.7.6 ipSecIpsoFilterTable...........................................10 4.7.6 ipSecIpsoFilterTable...........................................10
4.8 ipSecPolicyTimePeriod group......................................10 4.8 ipSecPolicyTimePeriod group......................................10
4.8.1 ipSecRuleTimePeriodTable.......................................10 4.8.1 ipSecRuleTimePeriodTable.......................................10
4.8.2 ipSecRuleTimePeriodSetTable....................................10 4.8.2 ipSecRuleTimePeriodSetTable....................................10
4.9 ipSecIfCapability group..........................................10 4.9 ipSecIfCapability group..........................................10
4.9.1 ipSecIfCapsTable...............................................10 4.9.1 ipSecIfCapsTable...............................................10
4.10 ipSecPolicyPibConformance group.................................10 4.10 ipSecPolicyPibConformance group.................................10
Li, et al Expires February, 2003 92
IPsec Policy Information Base August, 2002
5. The IPsec PIB Module..............................................11 5. The IPsec PIB Module..............................................11
6. Security Considerations...........................................89 6. Security Considerations...........................................89
7. References........................................................89 7. RFC Editor Considerations.........................................90
8. Author's Addresses................................................90 8. IANA Considerations...............................................90
9. Full Copyright Statement..........................................91 9. Normative References..............................................90
10. Informative References...........................................91
11. Author's Addresses...............................................91
12. Full Copyright Statement.........................................92
Li, et al Expires February, 2003 93 Li, et al Expires June 2003 94
 End of changes. 

This html diff was produced by rfcdiff 1.23, available from http://www.levkowetz.com/ietf/tools/rfcdiff/