draft-ietf-iptel-trip-mib-04.txt   draft-ietf-iptel-trip-mib-05.txt 
Internet Draft D. Zinman Internet Draft D. Zinman
Document: draft-ietf-iptel-trip-mib-04.txt Consultant Document: draft-ietf-iptel-trip-mib-05.txt Soma Networks
Expires: March 2003 D. Walker Expires: August 2003 D. Walker
Jianping Jiang Jianping Jiang
SS8 Networks SS8 Networks
Management Information Base Management Information Base
for Telephony Routing over IP (TRIP) for Telephony Routing over IP (TRIP)
<draft-ietf-iptel-trip-mib-04.txt> <draft-ietf-iptel-trip-mib-05.txt>
Status of this Memo Status of this Memo
This document is an Internet-Draft and is in full conformance with This document is an Internet-Draft and is in full conformance with
all provisions of Section 10 of RFC 2026 [RFC2026]. all provisions of Section 10 of RFC 2026 [RFC2026].
Internet-Drafts are working documents of the Internet Engineering Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF), its areas, and its working groups. Note that Task Force (IETF), its areas, and its working groups. Note that
other groups may also distribute working documents as Internet- other groups may also distribute working documents as Internet-
Drafts. Drafts.
skipping to change at line 61 skipping to change at line 61
Abstract...........................................................1 Abstract...........................................................1
1. Introduction..................................................3 1. Introduction..................................................3
2. Conventions used in this document.............................3 2. Conventions used in this document.............................3
3. The SNMP Management Framework.................................3 3. The SNMP Management Framework.................................3
4. Overview......................................................4 4. Overview......................................................4
5. Structure of TRIP MIB.........................................4 5. Structure of TRIP MIB.........................................4
5.1 Textual Conventions.........................................5 5.1 Textual Conventions.........................................5
6. Definitions...................................................5 6. Definitions...................................................5
6.1 TRIP Textual Conventions....................................5 6.1 TRIP Textual Conventions....................................5
6.2 TRIP MIB....................................................7 6.2 TRIP MIB....................................................7
7. Security Considerations......................................39 7. Security Considerations......................................41
8. Full Copyright Statement.....................................40 8. Full Copyright Statement.....................................41
9. Normative References.........................................40 9. Normative References.........................................42
10. Informative References.......................................41 10. Informative References.......................................43
11. Intellectual Property Notice.................................42 11. Intellectual Property Notice.................................44
12. Acknowledgments..............................................43 12. Acknowledgments..............................................44
13. Author's Addresses...........................................43 13. Author's Addresses...........................................44
14. Working Group................................................43 14. Working Group................................................45
Zinman/Walker/Jiang 2 Zinman/Walker/Jiang 2
1. Introduction 1. Introduction
This memo defines a portion of the Management Information Base (MIB) This memo defines a portion of the Management Information Base (MIB)
for use with network management protocols in the Internet community. for use with network management protocols in the Internet community.
In particular, it describes a set of managed objects that are used In particular, it describes a set of managed objects that are used
to schedule management operations periodically or at specified dates to schedule management operations periodically or at specified dates
and times. Since TRIP [RFC3219] is modeled after the Border Gateway and times. Since TRIP [RFC3219] is modeled after the Border Gateway
skipping to change at line 208 skipping to change at line 208
MODULE-IDENTITY, MODULE-IDENTITY,
Unsigned32, Unsigned32,
Integer32, Integer32,
mib-2 mib-2
FROM SNMPv2-SMI FROM SNMPv2-SMI
TEXTUAL-CONVENTION TEXTUAL-CONVENTION
FROM SNMPv2-TC; FROM SNMPv2-TC;
tripTC MODULE-IDENTITY tripTC MODULE-IDENTITY
LAST-UPDATED "200210100000Z" -- Oct 10, 2002 LAST-UPDATED "200302230000Z" -- Feb 23, 2003
ORGANIZATION "IETF IPTel Working Group. ORGANIZATION "IETF IPTel Working Group.
Mailing list: iptel@lists.bell-labs.com" Mailing list: iptel@lists.bell-labs.com"
CONTACT-INFO CONTACT-INFO
"Co-editor David Zinman "Co-editor David Zinman
Consultant Soma Networks
email: dzinman@sympatico.ca postal: 312 Adelaide St. West Suite 700
phone: +1 613 791 2841 Toronto ON, M5V 1R2
Canada
email: dzinman@somanetworks.com
phone: +1 416 348 1656
Co-editor Dave Walker Co-editor Dave Walker
SS8 Networks, Inc. SS8 Networks, Inc.
postal: 495 March Road, Suite #500 postal: 495 March Road, Suite #500
Ottawa, ON, K2K 3G1 Canada Ottawa, ON, K2K 3G1
Canada
email: drwalker@ss8.com email: drwalker@ss8.com
phone: +1 613 592 2100 phone: +1 613 592 2100
Co-editor Jianping Jiang Co-editor Jianping Jiang
SS8 Networks, Inc. SS8 Networks, Inc.
postal: 495 March Road, Suite #500 postal: 495 March Road, Suite #500
Ottawa, ON, K2K 3G1 Canada
Zinman/Walker/Jiang 5
Ottawa, ON, K2K 3G1
Canada
email: jianping@ss8.com email: jianping@ss8.com
phone: +1 613 592 2100 phone: +1 613 592 2100
" "
Zinman/Walker/Jiang 5
DESCRIPTION DESCRIPTION
"Initial version of TRIP (Telephony Routing Over IP) "Initial version of TRIP (Telephony Routing Over IP)
MIB Textual Conventions module used by other MIB Textual Conventions module used by other
TRIP-related MIB Modules." TRIP-related MIB Modules.
Copyright (C) The Internet Society (2002). This version of
this MIB module is part of RFC xxxx, see the RFC itself
for full legal notices."
::= { mib-2 xxxx } -- to be assigned by IANA ::= { mib-2 xxxx } -- to be assigned by IANA
-- --
-- Textual Conventions -- Textual Conventions
-- --
TripItad ::= TEXTUAL-CONVENTION TripItad ::= TEXTUAL-CONVENTION
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The values for identifying the IP Telephony "The values for identifying the IP Telephony
Administrative Domain (ITAD)." Administrative Domain (ITAD)."
skipping to change at line 275 skipping to change at line 285
Code Address Family Code Address Family
1 Decimal Routing Numbers 1 Decimal Routing Numbers
2 PentaDecimal Routing Numbers 2 PentaDecimal Routing Numbers
3 E.164 Numbers" 3 E.164 Numbers"
SYNTAX INTEGER { decimal(1), pentadecimal(2), e164(3) } SYNTAX INTEGER { decimal(1), pentadecimal(2), e164(3) }
TripAppProtocol ::= TEXTUAL-CONVENTION TripAppProtocol ::= TEXTUAL-CONVENTION
STATUS current STATUS current
DESCRIPTION DESCRIPTION
Zinman/Walker/Jiang 6
"The application protocol used for communication with TRIP "The application protocol used for communication with TRIP
Location Servers (LS). Protocols defined in this document Location Servers (LS). Protocols defined in this MIB
are: Module are:
Code Protocol Code Protocol
1 SIP 1 SIP
2 H.323-H.225.0-Q.931 2 H.323-H.225.0-Q.931
3 H.323-H.225.0-RAS 3 H.323-H.225.0-RAS
4 H.323-H.225.0-Annex-G" 4 H.323-H.225.0-Annex-G"
Zinman/Walker/Jiang 6
SYNTAX INTEGER { sip(1), q931(2), ras(3), annexG(4) } SYNTAX INTEGER { sip(1), q931(2), ras(3), annexG(4) }
TripCommunityId ::= TEXTUAL-CONVENTION TripCommunityId ::= TEXTUAL-CONVENTION
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The range of legal values for a TRIP Community Identifier." "The range of legal values for a TRIP Community Identifier."
SYNTAX Unsigned32 (0..4294967295) SYNTAX Unsigned32 (0..4294967295)
TripProtocolVersion ::= TEXTUAL-CONVENTION TripProtocolVersion ::= TEXTUAL-CONVENTION
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The version number of the TRIP protocol." "The version number of the TRIP protocol."
SYNTAX Integer32 (1..255) SYNTAX Integer32 (1..255)
TripSendReceiveMode ::= TEXTUAL-CONVENTION TripSendReceiveMode ::= TEXTUAL-CONVENTION
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The operational mode of the TRIP application." "The operational mode of the TRIP application. Possible
values are:
1 - Send Receive mode
2 - Send only mode
3 - Receive Only mode"
SYNTAX INTEGER { sendReceive(1), sendOnly(2), receiveOnly(3) } SYNTAX INTEGER { sendReceive(1), sendOnly(2), receiveOnly(3) }
END END
6.2 TRIP MIB 6.2 TRIP MIB
TRIP-MIB DEFINITIONS ::= BEGIN TRIP-MIB DEFINITIONS ::= BEGIN
IMPORTS IMPORTS
MODULE-IDENTITY, MODULE-IDENTITY,
OBJECT-TYPE, OBJECT-TYPE,
NOTIFICATION-TYPE, NOTIFICATION-TYPE,
Unsigned32, Unsigned32,
Integer32, Integer32,
Counter32, Counter32,
mib-2 mib-2
FROM SNMPv2-SMI FROM SNMPv2-SMI
DateAndTime, DateAndTime,
TimeInterval, TimeInterval,
Zinman/Walker/Jiang 7
TruthValue, TruthValue,
TimeStamp, TimeStamp,
StorageType, StorageType,
RowStatus RowStatus
FROM SNMPv2-TC FROM SNMPv2-TC
OBJECT-GROUP, OBJECT-GROUP,
MODULE-COMPLIANCE, MODULE-COMPLIANCE,
NOTIFICATION-GROUP NOTIFICATION-GROUP
FROM SNMPv2-CONF FROM SNMPv2-CONF
InetAddressType, InetAddressType,
InetAddress, InetAddress,
Zinman/Walker/Jiang 7
InetPortNumber InetPortNumber
FROM INET-ADDRESS-MIB FROM INET-ADDRESS-MIB
applIndex applIndex
FROM NETWORK-SERVICES-MIB FROM NETWORK-SERVICES-MIB
TripItad, TripItad,
TripId, TripId,
TripAppProtocol, TripAppProtocol,
TripAddressFamily, TripAddressFamily,
TripCommunityId, TripCommunityId,
TripProtocolVersion, TripProtocolVersion,
TripSendReceiveMode TripSendReceiveMode
FROM TRIP-TC; FROM TRIP-TC;
tripMIB MODULE-IDENTITY tripMIB MODULE-IDENTITY
LAST-UPDATED "200210100000Z" -- Oct 10, 2002 LAST-UPDATED "200302230000Z" -- Feb 23, 2003
ORGANIZATION "IETF IPTel Working Group. ORGANIZATION "IETF IPTel Working Group.
Mailing list: iptel@lists.bell-labs.com" Mailing list: iptel@lists.bell-labs.com"
CONTACT-INFO CONTACT-INFO
"Co-editor David Zinman "Co-editor David Zinman
Consultant Soma Networks
email: dzinman@sympatico.ca postal: 312 Adelaide St. West Suite 700
phone: +1 613 791 2841 Toronto ON, M5V 1R2
Canada
email: dzinman@somanetworks.com
phone: +1 416 348 1656
Co-editor Dave Walker Co-editor Dave Walker
SS8 Networks, Inc. SS8 Networks, Inc.
postal: 495 March Road, Suite #500 postal: 495 March Road, Suite #500
Ottawa, ON, K2K 3G1 Canada Ottawa, ON, K2K 3G1
Canada
email: drwalker@ss8.com email: drwalker@ss8.com
phone: +1 613 592 2100 phone: +1 613 592 2100
Co-editor Jianping Jiang Co-editor Jianping Jiang
SS8 Networks, Inc. SS8 Networks, Inc.
Zinman/Walker/Jiang 8
postal: 495 March Road, Suite #500 postal: 495 March Road, Suite #500
Ottawa, ON, K2K 3G1 Canada Ottawa, ON, K2K 3G1
Canada
email: jianping@ss8.com email: jianping@ss8.com
phone: +1 613 592 2100 phone: +1 613 592 2100
" "
DESCRIPTION DESCRIPTION
"The MIB module describing Telephony Routing over IP (TRIP). "The MIB module describing Telephony Routing over IP
TRIP is a policy driven inter-administrative domain protocol (TRIP). TRIP is a policy driven inter-administrative
for advertising the reachability of telephony destinations domain protocol for advertising the reachability of
between location servers (LS), and for advertising attributes telephony destinations between location servers (LS), and
of the routes to those destinations." for advertising attributes of the routes to those
REVISION "200210100000Z" -- Oct 10, 2002 destinations.
Copyright (C) The Internet Society (2002). This version of
this MIB module is part of RFC xxxx, see the RFC itself
for full legal notices."
REVISION "200302230000Z" -- Feb 23, 2003
DESCRIPTION DESCRIPTION
"The initial version, Published as RFC xxxx." "The initial version, Published as RFC xxxx."
::= { mib-2 xxxx } -- to be assigned by IANA ::= { mib-2 xxxx } -- to be assigned by IANA
Zinman/Walker/Jiang 8
tripMIBNotifications OBJECT IDENTIFIER ::= { tripMIB 0 } tripMIBNotifications OBJECT IDENTIFIER ::= { tripMIB 0 }
tripMIBObjects OBJECT IDENTIFIER ::= { tripMIB 1 } tripMIBObjects OBJECT IDENTIFIER ::= { tripMIB 1 }
tripMIBConformance OBJECT IDENTIFIER ::= { tripMIB 2 } tripMIBConformance OBJECT IDENTIFIER ::= { tripMIB 2 }
tripMIBNotifObjects OBJECT IDENTIFIER ::= { tripMIB 3 } tripMIBNotifObjects OBJECT IDENTIFIER ::= { tripMIB 3 }
tripMIBCompliance OBJECT IDENTIFIER ::= tripMIBCompliance OBJECT IDENTIFIER ::=
{ tripMIBConformance 1 } { tripMIBConformance 1 }
tripMIBGroups OBJECT IDENTIFIER ::= tripMIBGroups OBJECT IDENTIFIER ::=
{ tripMIBConformance 2 } { tripMIBConformance 2 }
skipping to change at line 420 skipping to change at line 446
applicable to all TRIP applications referenced by the applicable to all TRIP applications referenced by the
applIndex. Each row represents those objects for a applIndex. Each row represents those objects for a
particular TRIP LS present in this system. The particular TRIP LS present in this system. The
instances of TRIP LS's are uniquely identified by the instances of TRIP LS's are uniquely identified by the
applIndex. The objects in this table should be applIndex. The objects in this table should be
nonVolatile and survive a reboot." nonVolatile and survive a reboot."
::= { tripMIBObjects 1 } ::= { tripMIBObjects 1 }
tripCfgEntry OBJECT-TYPE tripCfgEntry OBJECT-TYPE
SYNTAX TripCfgEntry SYNTAX TripCfgEntry
Zinman/Walker/Jiang 9
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A row of common configuration." "A row of common configuration."
INDEX { applIndex } INDEX { applIndex }
::= { tripCfgTable 1 } ::= { tripCfgTable 1 }
TripCfgEntry ::= TripCfgEntry ::=
SEQUENCE { SEQUENCE {
tripCfgProtocolVersion TripProtocolVersion, tripCfgProtocolVersion TripProtocolVersion,
skipping to change at line 441 skipping to change at line 469
tripCfgIdentifier TripId, tripCfgIdentifier TripId,
tripCfgOperStatus INTEGER, tripCfgOperStatus INTEGER,
tripCfgAdminStatus INTEGER, tripCfgAdminStatus INTEGER,
tripCfgAddrIAddrType InetAddressType, tripCfgAddrIAddrType InetAddressType,
tripCfgAddr InetAddress, tripCfgAddr InetAddress,
tripCfgPort InetPortNumber, tripCfgPort InetPortNumber,
tripCfgMinItadOriginationInterval Integer32, tripCfgMinItadOriginationInterval Integer32,
tripCfgMinRouteAdvertisementInterval Integer32, tripCfgMinRouteAdvertisementInterval Integer32,
tripCfgMaxPurgeTime Integer32, tripCfgMaxPurgeTime Integer32,
tripCfgDisableTime Integer32, tripCfgDisableTime Integer32,
tripCfgSendReceiveMode TripSendReceiveMode tripCfgSendReceiveMode TripSendReceiveMode,
tripCfgStorage StorageType
} }
Zinman/Walker/Jiang 9
tripCfgProtocolVersion OBJECT-TYPE tripCfgProtocolVersion OBJECT-TYPE
SYNTAX TripProtocolVersion SYNTAX TripProtocolVersion
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object will reflect the version of TRIP "This object will reflect the version of TRIP
supported by this system. It follows the same supported by this system. It follows the same
format as TRIP version information contained format as TRIP version information contained
in the TRIP messages generated by this TRIP entity in the TRIP messages generated by this TRIP entity."
as dictated by the TRIP specification[RFC3219]." REFERENCE
"RFC 3291, section 4.2."
::= { tripCfgEntry 1 } ::= { tripCfgEntry 1 }
tripCfgItad OBJECT-TYPE tripCfgItad OBJECT-TYPE
SYNTAX TripItad SYNTAX TripItad
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The Local Internet Telephony Administrative domain." "The Local Internet Telephony Administrative domain."
::= { tripCfgEntry 2 } ::= { tripCfgEntry 2 }
tripCfgIdentifier OBJECT-TYPE tripCfgIdentifier OBJECT-TYPE
SYNTAX TripId SYNTAX TripId
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The object that identifies this TRIP Client." "The object that identifies this TRIP Client."
Zinman/Walker/Jiang 10
::= { tripCfgEntry 3 } ::= { tripCfgEntry 3 }
tripCfgAdminStatus OBJECT-TYPE tripCfgAdminStatus OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
up(1), up(1),
down(2) down(2)
} }
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
skipping to change at line 492 skipping to change at line 523
up(1) : Set the application to normal operation. up(1) : Set the application to normal operation.
down(2): Set the application to a state where it will down(2): Set the application to a state where it will
not process TRIP messages." not process TRIP messages."
::= { tripCfgEntry 4 } ::= { tripCfgEntry 4 }
tripCfgOperStatus OBJECT-TYPE tripCfgOperStatus OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
up(1), up(1),
down(2) down(2),
faulty(3)
} }
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
Zinman/Walker/Jiang 10
DESCRIPTION DESCRIPTION
"The current operational state of the TRIP protocol. "The current operational state of the TRIP protocol.
up(1) : The application is operating normally, and up(1) : The application is operating normally, and
is processing (receiving and possibly is processing (receiving and possibly
issuing) TRIP requests and responses. issuing) TRIP requests and responses.
down(2): The application is currently unable to down(2): The application is currently not processing
process TRIP messages due to a fault or if TRIP messages. This occurs if the TRIP
TRIP is in an initialization state. application is in an initialization state or
if tripCfgAdminStatus is set to down(2).
If tripAdminStatus is down(2) then tripOperStatus should faulty(3): The application is not operating normally due
to a fault in the system.
If tripCfgAdminStatus is down(2) then tripOperStatus should
be down(2). If tripAdminStatus is changed to up(1) then be down(2). If tripAdminStatus is changed to up(1) then
tripOperStatus should change to up(1) if there is no tripOperStatus should change to up(1) if there is no
fault that prevents the TRIP protocol from moving to the fault that prevents the TRIP protocol from moving to the
up(1) state." up(1) state."
::= { tripCfgEntry 5 } ::= { tripCfgEntry 5 }
tripCfgAddrIAddrType OBJECT-TYPE tripCfgAddrIAddrType OBJECT-TYPE
SYNTAX InetAddressType SYNTAX InetAddressType
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
Zinman/Walker/Jiang 11
DESCRIPTION DESCRIPTION
"The type of Inet Address of the tripAddr." "The type of Inet Address of the tripAddr."
REFERENCE REFERENCE
"RFC 3291, section 3." "RFC 3291, section 3."
::= { tripCfgEntry 6 } ::= { tripCfgEntry 6 }
tripCfgAddr OBJECT-TYPE tripCfgAddr OBJECT-TYPE
SYNTAX InetAddress SYNTAX InetAddress
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The IP address of the local LS that the peer connects "The network address of the local LS that the peer c
to." onnects to. The type of address depends on the object
tripCfgAddrIAddrType."
REFERENCE REFERENCE
"RFC 3291, section 3." "RFC 3291, section 3."
::= { tripCfgEntry 7 } ::= { tripCfgEntry 7 }
tripCfgPort OBJECT-TYPE tripCfgPort OBJECT-TYPE
SYNTAX InetPortNumber SYNTAX InetPortNumber
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The local tcp/udp port on the local LS that the peer "The local tcp/udp port on the local LS that the peer
connects to." connects to."
::= { tripCfgEntry 8 } ::= { tripCfgEntry 8 }
tripCfgMinItadOriginationInterval OBJECT-TYPE tripCfgMinItadOriginationInterval OBJECT-TYPE
SYNTAX Integer32 (1..2147483647) SYNTAX Integer32 (1..2147483647)
UNITS "Seconds" UNITS "Seconds"
MAX-ACCESS read-write MAX-ACCESS read-write
Zinman/Walker/Jiang 11
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The minimum amount of time that must elapse between "The minimum amount of time that must elapse between
advertisement of update message that report changes advertisement of the update message that reports changes
within the LS's own ITAD." within the LS's own ITAD."
DEFVAL { 30 } DEFVAL { 30 }
::= { tripCfgEntry 9 } ::= { tripCfgEntry 9 }
tripCfgMinRouteAdvertisementInterval OBJECT-TYPE tripCfgMinRouteAdvertisementInterval OBJECT-TYPE
SYNTAX Integer32 (1..2147483647) SYNTAX Integer32 (1..2147483647)
UNITS "Seconds" UNITS "Seconds"
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Specifies minimal interval between successive "Specifies minimal interval between successive
advertisements to a particular destination from an LS." advertisements to a particular destination from an LS."
DEFVAL { 30 } DEFVAL { 30 }
::= { tripCfgEntry 10 } ::= { tripCfgEntry 10 }
tripCfgMaxPurgeTime OBJECT-TYPE tripCfgMaxPurgeTime OBJECT-TYPE
SYNTAX Integer32 (1..2147483647) SYNTAX Integer32 (1..2147483647)
Zinman/Walker/Jiang 12
UNITS "Seconds" UNITS "Seconds"
MAX-ACCESS read-write MAX-ACCESS read-write
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicate the interval that the LS must maintain routes "Indicate the interval that the LS must maintain routes
marked as withdrawn in its database." marked as withdrawn in its database."
DEFVAL { 10 } DEFVAL { 10 }
::= { tripCfgEntry 11 } ::= { tripCfgEntry 11 }
tripCfgDisableTime OBJECT-TYPE tripCfgDisableTime OBJECT-TYPE
skipping to change at line 600 skipping to change at line 637
location server with high sequence numbers can be location server with high sequence numbers can be
removed." removed."
DEFVAL { 180 } DEFVAL { 180 }
::= { tripCfgEntry 12 } ::= { tripCfgEntry 12 }
tripCfgSendReceiveMode OBJECT-TYPE tripCfgSendReceiveMode OBJECT-TYPE
SYNTAX TripSendReceiveMode SYNTAX TripSendReceiveMode
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The operational mode of the trip entity running on this "The operational mode of the TRIP entity running on this
system." system."
::= { tripCfgEntry 13 } ::= { tripCfgEntry 13 }
Zinman/Walker/Jiang 12 tripCfgStorage OBJECT-TYPE
SYNTAX StorageType
MAX-ACCESS read-write
STATUS current
DESCRIPTION
"The storage type for this conceptual row. Conceptual
rows having the value 'permanent' need not allow write-
access to any columnar objects in the row. It is not a
requirement that this storage be non volatile."
DEFVAL { nonVolatile }
::= { tripCfgEntry 14 }
-- --
-- TripRouteTypeTable -- TripRouteTypeTable
-- --
tripRouteTypeTable OBJECT-TYPE tripRouteTypeTable OBJECT-TYPE
SYNTAX SEQUENCE OF TripRouteTypeEntry SYNTAX SEQUENCE OF TripRouteTypeEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The TRIP Route Type table contains one entry per
supported protocol - address family pair. This table Zinman/Walker/Jiang 13
lists the route types supported in this peering session "The TRIP peer Route Type table contains one entry per
by the transmitting LS. The objects in this table are supported protocol - address family pair. The objects in
volatile and are refreshed after a reboot." this table are volatile and are refreshed after a reboot."
::= { tripMIBObjects 2 } ::= { tripMIBObjects 2 }
tripRouteTypeEntry OBJECT-TYPE tripRouteTypeEntry OBJECT-TYPE
SYNTAX TripRouteTypeEntry SYNTAX TripRouteTypeEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Entry containing information about the route type that "An entry containing information about the route type
the TRIP entity supports." that a particular TRIP entity supports. Each entry
represents information about either the local or a remote
LS peer. The object tripRouteTypePeer is used to
distinguish this. In the case of a local LS, the
address/port information will reflect the values
configured in tripCfgTable. In the case of a remote
peer, the address/port information will reflect the
values of an entry in the tripPeerTable."
INDEX { applIndex, INDEX { applIndex,
tripRouteTypeAddrInetType,
tripRouteTypeAddr,
tripRouteTypePort,
tripRouteTypeProtocolId, tripRouteTypeProtocolId,
tripRouteTypeAddrFamilyId } tripRouteTypeAddrFamilyId }
::= { tripRouteTypeTable 1 } ::= { tripRouteTypeTable 1 }
TripRouteTypeEntry ::= SEQUENCE { TripRouteTypeEntry ::= SEQUENCE {
tripRouteTypeAddrInetType InetAddressType,
tripRouteTypeAddr InetAddress,
tripRouteTypePort InetPortNumber,
tripRouteTypeProtocolId TripAppProtocol, tripRouteTypeProtocolId TripAppProtocol,
tripRouteTypeAddrFamilyId TripAddressFamily tripRouteTypeAddrFamilyId TripAddressFamily,
tripRouteTypePeer INTEGER
} }
tripRouteTypeAddrInetType OBJECT-TYPE
SYNTAX InetAddressType
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The type of Inet Address of the tripRouteTypeAddr."
REFERENCE
"RFC 3291, section 3."
::= { tripRouteTypeEntry 1 }
tripRouteTypeAddr OBJECT-TYPE
SYNTAX InetAddress
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The network address of this entry's TRIP peer LS."
Zinman/Walker/Jiang 14
REFERENCE
"RFC 3291, section 3."
::= { tripRouteTypeEntry 2 }
tripRouteTypePort OBJECT-TYPE
SYNTAX InetPortNumber
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The port for the TCP connection between this and
an associated TRIP peer."
::= { tripRouteTypeEntry 3 }
tripRouteTypeProtocolId OBJECT-TYPE tripRouteTypeProtocolId OBJECT-TYPE
SYNTAX TripAppProtocol SYNTAX TripAppProtocol
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The object identifier of a protocol that this peer is "The object identifier of a protocol that the associated
using. The size value of 116 has been assigned due to the peer is using."
sub identifier of object types length limitation as ::= { tripRouteTypeEntry 4 }
defined in SMIv2."
::= { tripRouteTypeEntry 1 }
tripRouteTypeAddrFamilyId OBJECT-TYPE tripRouteTypeAddrFamilyId OBJECT-TYPE
SYNTAX TripAddressFamily SYNTAX TripAddressFamily
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The object identifier of an address family that the
associated peer belongs to."
::= { tripRouteTypeEntry 5 }
tripRouteTypePeer OBJECT-TYPE
SYNTAX INTEGER { local(1), remote(2) }
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The object identifier of an address family that this "This object identifies whether this entry is
peer belongs to." associated with a 'local' or 'remote' LS peer."
::= { tripRouteTypeEntry 2 } ::= { tripRouteTypeEntry 6 }
Zinman/Walker/Jiang 13
-- --
-- tripSupportedCommunityTable -- tripSupportedCommunityTable
-- --
tripSupportedCommunityTable OBJECT-TYPE tripSupportedCommunityTable OBJECT-TYPE
SYNTAX SEQUENCE OF TripSupportedCommunityEntry SYNTAX SEQUENCE OF TripSupportedCommunityEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The list of TRIP communities that this LS supports. A "The list of TRIP communities that this LS supports. A
TRIP community is a group of destinations that share TRIP community is a group of destinations that share
common properties. common properties.
The TRIP Communities attribute is used to group Zinman/Walker/Jiang 15
The TRIP Supported Communities entry is used to group
destinations so that the routing decision can be based destinations so that the routing decision can be based
on the identity of the group." on the identity of the group."
REFERENCE REFERENCE
"RFC 3219, section 5.9" "RFC 3219, section 5.9"
::= { tripMIBObjects 3 } ::= { tripMIBObjects 3 }
tripSupportedCommunityEntry OBJECT-TYPE tripSupportedCommunityEntry OBJECT-TYPE
SYNTAX TripSupportedCommunityEntry SYNTAX TripSupportedCommunityEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Entry containing information about a community. A TRIP "Entry containing information about a community. A TRIP
community is a group of destinations that share some community is a group of destinations that share some
common property. This attribute is used so that routing common property. This attribute is used so that routing
decisions can be based on the identity of the group" decisions can be based on the identity of the group."
INDEX { applIndex, tripSupportedCommunityId } INDEX { applIndex, tripSupportedCommunityId }
::= { tripSupportedCommunityTable 1 } ::= { tripSupportedCommunityTable 1 }
TripSupportedCommunityEntry ::= SEQUENCE { TripSupportedCommunityEntry ::= SEQUENCE {
tripSupportedCommunityId TripCommunityId, tripSupportedCommunityId TripCommunityId,
tripSupportedCommunityItad TripItad, tripSupportedCommunityItad TripItad,
tripSupportedCommunityStorage StorageType, tripSupportedCommunityStorage StorageType,
tripSupportedCommunityRowStatus RowStatus tripSupportedCommunityRowStatus RowStatus
} }
skipping to change at line 710 skipping to change at line 810
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The identifier of the supported Community." "The identifier of the supported Community."
::= { tripSupportedCommunityEntry 1 } ::= { tripSupportedCommunityEntry 1 }
tripSupportedCommunityItad OBJECT-TYPE tripSupportedCommunityItad OBJECT-TYPE
SYNTAX TripItad SYNTAX TripItad
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
Zinman/Walker/Jiang 14
DESCRIPTION DESCRIPTION
"The Itad of the community." "The Itad of the community."
::= { tripSupportedCommunityEntry 2 } ::= { tripSupportedCommunityEntry 2 }
tripSupportedCommunityStorage OBJECT-TYPE tripSupportedCommunityStorage OBJECT-TYPE
SYNTAX StorageType SYNTAX StorageType
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The storage type for this conceptual row. Conceptual "The storage type for this conceptual row. Conceptual
rows having the value 'permanent' need not allow write- rows having the value 'permanent' need not allow write-
access to any columnar objects in the row." access to any columnar objects in the row. It is not a
requirement that this storage be non volatile."
Zinman/Walker/Jiang 16
DEFVAL { nonVolatile } DEFVAL { nonVolatile }
::= { tripSupportedCommunityEntry 3 } ::= { tripSupportedCommunityEntry 3 }
tripSupportedCommunityRowStatus OBJECT-TYPE tripSupportedCommunityRowStatus OBJECT-TYPE
SYNTAX RowStatus SYNTAX RowStatus
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The row status of the entry. This object is required "The row status of the entry. This object is required
to create or delete rows by a manager. A value for to create or delete rows by a manager. A value for
skipping to change at line 764 skipping to change at line 865
::= { tripMIBObjects 4 } ::= { tripMIBObjects 4 }
tripPeerEntry OBJECT-TYPE tripPeerEntry OBJECT-TYPE
SYNTAX TripPeerEntry SYNTAX TripPeerEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Entry containing information about the connection with "Entry containing information about the connection with
a TRIP peer." a TRIP peer."
INDEX { applIndex, INDEX { applIndex,
Zinman/Walker/Jiang 15
tripPeerRemoteAddrInetType, tripPeerRemoteAddrInetType,
tripPeerRemoteAddr, tripPeerRemoteAddr,
tripPeerRemotePort } tripPeerRemotePort }
::= {tripPeerTable 1} ::= {tripPeerTable 1}
TripPeerEntry ::= SEQUENCE { TripPeerEntry ::= SEQUENCE {
tripPeerRemoteAddrInetType InetAddressType, tripPeerRemoteAddrInetType InetAddressType,
tripPeerRemoteAddr InetAddress, tripPeerRemoteAddr InetAddress,
tripPeerRemotePort InetPortNumber, tripPeerRemotePort InetPortNumber,
tripPeerIdentifier TripId, tripPeerIdentifier TripId,
tripPeerState INTEGER, tripPeerState INTEGER,
tripPeerAdminStatus INTEGER, tripPeerAdminStatus INTEGER,
Zinman/Walker/Jiang 17
tripPeerNegotiatedVersion TripProtocolVersion, tripPeerNegotiatedVersion TripProtocolVersion,
tripPeerSendReceiveMode TripSendReceiveMode, tripPeerSendReceiveMode TripSendReceiveMode,
tripPeerRemoteItad TripItad, tripPeerRemoteItad TripItad,
tripPeerConnectRetryInterval Integer32, tripPeerConnectRetryInterval Integer32,
tripPeerMaxRetryInterval Integer32, tripPeerMaxRetryInterval Integer32,
tripPeerHoldTime Integer32, tripPeerHoldTime Integer32,
tripPeerKeepAlive Integer32, tripPeerKeepAlive Integer32,
tripPeerHoldTimeConfigured Integer32, tripPeerHoldTimeConfigured Integer32,
tripPeerKeepAliveConfigured Integer32, tripPeerKeepAliveConfigured Integer32,
tripPeerMaxPurgeTime Integer32, tripPeerMaxPurgeTime Integer32,
skipping to change at line 818 skipping to change at line 919
DESCRIPTION DESCRIPTION
"The IP address of this entry's TRIP peer LS." "The IP address of this entry's TRIP peer LS."
REFERENCE REFERENCE
"RFC 3291, section 3." "RFC 3291, section 3."
::= { tripPeerEntry 2 } ::= { tripPeerEntry 2 }
tripPeerRemotePort OBJECT-TYPE tripPeerRemotePort OBJECT-TYPE
SYNTAX InetPortNumber SYNTAX InetPortNumber
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
Zinman/Walker/Jiang 16
DESCRIPTION DESCRIPTION
"The remote port for the TCP connection between the "The remote port for the TCP connection between the
TRIP peers." TRIP peers."
::= { tripPeerEntry 3 } ::= { tripPeerEntry 3 }
tripPeerIdentifier OBJECT-TYPE tripPeerIdentifier OBJECT-TYPE
SYNTAX TripId SYNTAX TripId
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"TRIP identifier of the peer." "TRIP identifier of the peer."
::= { tripPeerEntry 4 } ::= { tripPeerEntry 4 }
Zinman/Walker/Jiang 18
tripPeerState OBJECT-TYPE tripPeerState OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
idle(1), idle(1),
connect(2), connect(2),
active(3), active(3),
openSent(4), openSent(4),
openConfirm(5), openConfirm(5),
established(6) established(6)
} }
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"TRIP Peer Finite State Machine state. "TRIP Peer Finite State Machine state.
idle(1) : The initial state. Local LS refuses all idle(1) : The initial state. Local LS refuses all
incoming connections. No resources are incoming connections. No application
allocated to the peer. resources are allocated to processing
information about the remote peer.
connect(2) : Local LS waiting for a transport connect(2) : Local LS waiting for a transport
protocol connection to be completed to protocol connection to be completed to
the peer, and is listening for inbound the peer, and is listening for inbound
transport connections from the peer. transport connections from the peer.
active(3) : LS is listening for an inbound active(3) : Local LS is listening for an inbound
connection from the peer, but is not in connection from the peer, but is not in
the process of initiating a connection the process of initiating a connection
to the peer. to the remote peer.
openSent(4) : LS has sent an OPEN message to its peer openSent(4) : Local LS has sent an OPEN message to its
and is waiting for an OPEN message from peer and is waiting for an OPEN message
its peer. from the remote peer.
openConfirm(5): LS has sent an OPEN to its peer, openConfirm(5): Local LS has sent an OPEN message to the
received an OPEN from its peer, and sent remote peer, received an OPEN message from
a KEEPALIVE in response to the OPEN. The the remote peer, and sent a KEEPALIVE
LS is now waiting for a KEEPALIVE or message in response to the OPEN. The local
NOTIFICATION message in LS is now waiting for a KEEPALIVE message
response to its OPEN. or a NOTIFICATION message in response to
its OPEN message.
Zinman/Walker/Jiang 17
established(6): LS can exchange UPDATE, NOTIFICATION,and established(6): LS can exchange UPDATE, NOTIFICATION,and
KEEPALIVE messages with its peer." KEEPALIVE messages with its peer."
::= { tripPeerEntry 5 } ::= { tripPeerEntry 5 }
tripPeerAdminStatus OBJECT-TYPE tripPeerAdminStatus OBJECT-TYPE
SYNTAX INTEGER { SYNTAX INTEGER {
up(1), up(1),
down(2) down(2)
} }
MAX-ACCESS read-create MAX-ACCESS read-create
Zinman/Walker/Jiang 19
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object is used to affect the TRIP connection "This object is used to affect the TRIP connection
state. state.
up(1) : Allow a connection with the peer LS. up(1) : Allow a connection with the peer LS.
down(2) : disconnect the connection from the peer LS and down(2) : disconnect the connection from the peer LS and
do not allow any further connections to this do not allow any further connections to this
peer." peer.
If this value is set to down(2) then tripPeerState will
have the value of idle(1)."
DEFVAL { up }
::= { tripPeerEntry 6 } ::= { tripPeerEntry 6 }
tripPeerNegotiatedVersion OBJECT-TYPE tripPeerNegotiatedVersion OBJECT-TYPE
SYNTAX TripProtocolVersion SYNTAX TripProtocolVersion
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The negotiated version of TRIP running between this "The negotiated version of TRIP running between this
local entity and this peer." local entity and this peer."
::= { tripPeerEntry 7 } ::= { tripPeerEntry 7 }
skipping to change at line 924 skipping to change at line 1031
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The Internet Telephony Administrative domain of "The Internet Telephony Administrative domain of
this peer." this peer."
::= { tripPeerEntry 9 } ::= { tripPeerEntry 9 }
tripPeerConnectRetryInterval OBJECT-TYPE tripPeerConnectRetryInterval OBJECT-TYPE
SYNTAX Integer32 (0..2147483647) SYNTAX Integer32 (0..2147483647)
UNITS "Seconds" UNITS "Seconds"
Zinman/Walker/Jiang 18
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Specifies the initial amount of time that will elapse "Specifies the initial amount of time that will elapse
between connection retry. This value should double between connection retry. This value should double
after each attempt up to the value of after each attempt up to the value of
Zinman/Walker/Jiang 20
tripPeerMaxRetryInterval. This value must always be less tripPeerMaxRetryInterval. This value must always be less
than or equal to the value of tripPeerMaxRetryInterval. than or equal to the value of tripPeerMaxRetryInterval.
Attempts to set this value higher than the max retry Attempts to set this value higher than the max retry
should not be allowed." will not be allowed."
DEFVAL { 120 } DEFVAL { 120 }
::= { tripPeerEntry 10 } ::= { tripPeerEntry 10 }
tripPeerMaxRetryInterval OBJECT-TYPE tripPeerMaxRetryInterval OBJECT-TYPE
SYNTAX Integer32 (0..2147483647) SYNTAX Integer32 (0..2147483647)
UNITS "Seconds" UNITS "Seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Specifies the maximum amount of time that will elapse "Specifies the maximum amount of time that will elapse
skipping to change at line 978 skipping to change at line 1085
SYNTAX Integer32 (1..2147483647) SYNTAX Integer32 (1..2147483647)
UNITS "Seconds" UNITS "Seconds"
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Specifies the amount of time that must elapse between "Specifies the amount of time that must elapse between
keep alive messages. This value is negotiated with the keep alive messages. This value is negotiated with the
remote when a connection is established." remote when a connection is established."
::= { tripPeerEntry 13 } ::= { tripPeerEntry 13 }
Zinman/Walker/Jiang 19
tripPeerHoldTimeConfigured OBJECT-TYPE tripPeerHoldTimeConfigured OBJECT-TYPE
SYNTAX Integer32 (0 | 3..65535) SYNTAX Integer32 (0 | 3..65535)
UNITS "Seconds" UNITS "Seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
Zinman/Walker/Jiang 21
DESCRIPTION DESCRIPTION
"Specifies the maximum time that may elapse between the "Specifies the maximum time that may elapse between the
receipt of successive keepalive or update message." receipt of successive keepalive or update message."
DEFVAL { 240 } DEFVAL { 240 }
::= { tripPeerEntry 14 } ::= { tripPeerEntry 14 }
tripPeerKeepAliveConfigured OBJECT-TYPE tripPeerKeepAliveConfigured OBJECT-TYPE
SYNTAX Integer32 (1..2147483647) SYNTAX Integer32 (1..2147483647)
UNITS "Seconds" UNITS "Seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
skipping to change at line 1018 skipping to change at line 1126
marked as withdrawn in its database." marked as withdrawn in its database."
DEFVAL { 10 } DEFVAL { 10 }
::= { tripPeerEntry 16 } ::= { tripPeerEntry 16 }
tripPeerDisableTime OBJECT-TYPE tripPeerDisableTime OBJECT-TYPE
SYNTAX Integer32 (1..65535) SYNTAX Integer32 (1..65535)
UNITS "Seconds" UNITS "Seconds"
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicate the interval that the TRIP module of the peer "Indicate the interval that the TRIP module of the remote
LS must be disabled while routes originated by the local peer LS must be disabled while routes originated by the
LS with high sequence numbers can be removed." local LS with high sequence numbers can be removed."
DEFVAL { 180 } DEFVAL { 180 }
::= { tripPeerEntry 17 } ::= { tripPeerEntry 17 }
tripPeerLearned OBJECT-TYPE tripPeerLearned OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates whether this entry was learned or "Indicates whether this entry was learned or
Zinman/Walker/Jiang 20
configured." configured."
DEFVAL { false } DEFVAL { false }
::= { tripPeerEntry 18 } ::= { tripPeerEntry 18 }
tripPeerStorage OBJECT-TYPE tripPeerStorage OBJECT-TYPE
SYNTAX StorageType SYNTAX StorageType
Zinman/Walker/Jiang 22
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The storage type for this conceptual row. Conceptual "The storage type for this conceptual row. Conceptual
rows having the value 'permanent' need not allow write- rows having the value 'permanent' need not allow write-
access to any columnar objects in the row." access to any columnar objects in the row. It is not a
requirement that this storage be non volatile."
DEFVAL { nonVolatile } DEFVAL { nonVolatile }
::= { tripPeerEntry 19 } ::= { tripPeerEntry 19 }
tripPeerRowStatus OBJECT-TYPE tripPeerRowStatus OBJECT-TYPE
SYNTAX RowStatus SYNTAX RowStatus
MAX-ACCESS read-create MAX-ACCESS read-create
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The row status of the entry. This object is required to "The row status of the entry. This object is required to
create or delete rows remotely by a manager. If the create or delete rows remotely by a manager. If the
instance already exists for a particular applIndex, the instance already exists for a particular applIndex, the
row create operation will fail. row create operation will fail.
The value of this object has no effect on whether The value of this object has no effect on whether
other objects in this conceptual row can be modified." other objects in this conceptual row can be modified.
::= { tripPeerEntry 20 }
--
-- tripPeerRouteTypeTable
--
tripPeerRouteTypeTable OBJECT-TYPE
SYNTAX SEQUENCE OF TripPeerRouteTypeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The TRIP peer Route Type table contains one entry per
supported protocol - address family pair. Each instance
of tripPeerRouteTypeEntry has an instance in the
tripPeerTable as a parent. The objects in this table are
volatile and are refreshed after a reboot."
::= { tripMIBObjects 5 }
tripPeerRouteTypeEntry OBJECT-TYPE
SYNTAX TripPeerRouteTypeEntry
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"Entry containing information about the route type that
the TRIP peer supports."
INDEX { applIndex,
Zinman/Walker/Jiang 21
tripPeerRemoteAddrInetType,
tripPeerRemoteAddr,
tripPeerRemotePort,
tripPeerRtTypeProtocolId,
tripPeerRtTypeAddrFamilyId }
::= { tripPeerRouteTypeTable 1 }
TripPeerRouteTypeEntry ::= SEQUENCE {
tripPeerRtTypeProtocolId TripAppProtocol,
tripPeerRtTypeAddrFamilyId TripAddressFamily
}
tripPeerRtTypeProtocolId OBJECT-TYPE
SYNTAX TripAppProtocol
MAX-ACCESS not-accessible
STATUS current
DESCRIPTION
"The object identifier of a protocol that this peer is
using."
::= { tripPeerRouteTypeEntry 1 }
tripPeerRtTypeAddrFamilyId OBJECT-TYPE Entries in this table can be learned by the TRIP
SYNTAX TripAddressFamily application, or provisioned through this table."
MAX-ACCESS read-only ::= { tripPeerEntry 20 }
STATUS current
DESCRIPTION
"The object identifier of an address family that this
peer belongs to."
::= { tripPeerRouteTypeEntry 2 }
-- --
-- TripPeerStatsTable -- TripPeerStatisticsTable
-- --
tripPeerStatsTable OBJECT-TYPE tripPeerStatisticsTable OBJECT-TYPE
SYNTAX SEQUENCE OF TripPeerStatsEntry SYNTAX SEQUENCE OF TripPeerStatisticsEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The TRIP peer stats table. This table contains one "The TRIP peer stats table. This table contains one
entry per TRIP peer, and statistics related to the entry per remote TRIP peer, and statistics related to the
connection with the peer. The objects in this table are connection with the remote peer. The objects in this
volatile." table are volatile."
::= { tripMIBObjects 6 } ::= { tripMIBObjects 5 }
tripPeerStatsEntry OBJECT-TYPE tripPeerStatisticsEntry OBJECT-TYPE
SYNTAX TripPeerStatsEntry SYNTAX TripPeerStatisticsEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Entry containing information about the connection with "Entry containing information about the connection with
a TRIP peer." a TRIP peer."
AUGMENTS { tripPeerEntry } AUGMENTS { tripPeerEntry }
::= { tripPeerStatisticsTable 1 }
Zinman/Walker/Jiang 22 TripPeerStatisticsEntry ::= SEQUENCE {
::= { tripPeerStatsTable 1 }
TripPeerStatsEntry ::= SEQUENCE { Zinman/Walker/Jiang 23
tripPeerInUpdates Counter32, tripPeerInUpdates Counter32,
tripPeerOutUpdates Counter32, tripPeerOutUpdates Counter32,
tripPeerInTotalMessages Counter32, tripPeerInTotalMessages Counter32,
tripPeerOutTotalMessages Counter32, tripPeerOutTotalMessages Counter32,
tripPeerFsmEstablishedTransitions Counter32, tripPeerFsmEstablishedTransitions Counter32,
tripPeerFsmEstablishedTime DateAndTime, tripPeerFsmEstablishedTime DateAndTime,
tripPeerInUpdateElapsedTime TimeInterval, tripPeerInUpdateElapsedTime TimeInterval,
tripPeerStateChangeTime TimeStamp tripPeerStateChangeTime TimeStamp
} }
tripPeerInUpdates OBJECT-TYPE tripPeerInUpdates OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of TRIP update messages received from this "The number of TRIP update messages received from this
peer since the last restart of this LS." remote peer since the last restart of this LS."
::= { tripPeerStatsEntry 1 } ::= { tripPeerStatisticsEntry 1 }
tripPeerOutUpdates OBJECT-TYPE tripPeerOutUpdates OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of TRIP update messages sent to this peer "The number of TRIP update messages sent to this remote
since the last restart of this location server." peer since the last restart of this location server."
::= { tripPeerStatsEntry 2 } ::= { tripPeerStatisticsEntry 2 }
tripPeerInTotalMessages OBJECT-TYPE tripPeerInTotalMessages OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The total number of TRIP messages received from the "The total number of TRIP messages received from the
remote peer on this connection since the last restart remote peer on this connection since the last restart
of this LS." of this LS."
::= { tripPeerStatsEntry 3 } ::= { tripPeerStatisticsEntry 3 }
tripPeerOutTotalMessages OBJECT-TYPE tripPeerOutTotalMessages OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The total number of outgoing TRIP messages sent to the "The total number of outgoing TRIP messages sent to the
remote peer since the last restart of this LS." remote peer since the last restart of this LS."
::= { tripPeerStatsEntry 4 } ::= { tripPeerStatisticsEntry 4 }
tripPeerFsmEstablishedTransitions OBJECT-TYPE tripPeerFsmEstablishedTransitions OBJECT-TYPE
SYNTAX Counter32 SYNTAX Counter32
Zinman/Walker/Jiang 23
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The number of times the TRIP peer has transitioned into
the established state since the last restart of this Zinman/Walker/Jiang 24
"The number of times the remote peer has transitioned
into the established state since the last restart of this
LS." LS."
::= { tripPeerStatsEntry 5 } ::= { tripPeerStatisticsEntry 5 }
tripPeerFsmEstablishedTime OBJECT-TYPE tripPeerFsmEstablishedTime OBJECT-TYPE
SYNTAX DateAndTime SYNTAX DateAndTime
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates the time and date that this peer entered the "Indicates the time and date that this remote peer entered
established state." the 'established' state."
::= { tripPeerStatsEntry 6 } ::= { tripPeerStatisticsEntry 6 }
tripPeerInUpdateElapsedTime OBJECT-TYPE tripPeerInUpdateElapsedTime OBJECT-TYPE
SYNTAX TimeInterval SYNTAX TimeInterval
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Elapsed time in hundredths of seconds since the last "Elapsed time in hundredths of seconds since the last
TRIP update message was received from the peer." TRIP update message was received from this remote peer."
::= { tripPeerStatsEntry 7 } ::= { tripPeerStatisticsEntry 7 }
tripPeerStateChangeTime OBJECT-TYPE tripPeerStateChangeTime OBJECT-TYPE
SYNTAX TimeStamp SYNTAX TimeStamp
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The value of sysUpTime when the last state change of "The value of sysUpTime when the last state change of
tripPeerState took place." tripPeerState took place."
::= { tripPeerStatsEntry 8 } ::= { tripPeerStatisticsEntry 8 }
-- TRIP Received Route Table. This table contains -- TRIP Received Route Table. This table contains
-- all routes from all sources. Each entry consists -- all routes from all sources. Each entry consists
-- of a route and its associated path attributes. -- of a route and its associated path attributes.
tripRouteTable OBJECT-TYPE tripRouteTable OBJECT-TYPE
SYNTAX SEQUENCE OF TripRouteEntry SYNTAX SEQUENCE OF TripRouteEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The TRIP route table containing information about "The TRIP route table containing information about
reachable routes that are to be added to service by the reachable routes that are to be added to service by the
receiving LS. The objects in this table are volatile receiving LS. The objects in this table are volatile
and are refreshed when this LS rediscovers its route and are refreshed when this LS rediscovers its route
table." table."
::= { tripMIBObjects 7 } ::= { tripMIBObjects 6 }
tripRouteEntry OBJECT-TYPE tripRouteEntry OBJECT-TYPE
Zinman/Walker/Jiang 24
SYNTAX TripRouteEntry SYNTAX TripRouteEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
Zinman/Walker/Jiang 25
DESCRIPTION DESCRIPTION
"Information about a route to a called destination." "Information about a route to a called destination."
INDEX { applIndex, INDEX { applIndex,
tripRouteAppProtocol, tripRouteAppProtocol,
tripRouteAddressFamily, tripRouteAddressFamily,
tripRouteAddress, tripRouteAddress,
tripRoutePeer tripRoutePeer
} }
::= { tripRouteTable 1 } ::= { tripRouteTable 1 }
skipping to change at line 1300 skipping to change at line 1357
is maintained." is maintained."
::= { tripRouteEntry 1 } ::= { tripRouteEntry 1 }
tripRouteAddressFamily OBJECT-TYPE tripRouteAddressFamily OBJECT-TYPE
SYNTAX TripAddressFamily SYNTAX TripAddressFamily
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Specifies the type of address for the destination "Specifies the type of address for the destination
route." route."
Zinman/Walker/Jiang 25
::= { tripRouteEntry 2 } ::= { tripRouteEntry 2 }
tripRouteAddress OBJECT-TYPE tripRouteAddress OBJECT-TYPE
Zinman/Walker/Jiang 26
SYNTAX OCTET STRING (SIZE(1..105)) SYNTAX OCTET STRING (SIZE(1..105))
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This is the address (prefix) of the family type given "This is the address (prefix) of the family type given
by Address Family of the destination. It is the prefix by Address Family of the destination. It is the prefix
of addresses reachable from this gateway via the next of addresses reachable from this gateway via the next
hop server. The size value of 105 has been assigned due hop server. The size value of 105 has been assigned due
to the sub identifier of object types length limitation to the sub identifier of object types length limitation
as defined in SMIv2." as defined in SMIv2."
skipping to change at line 1338 skipping to change at line 1395
tripRouteTRIBMask OBJECT-TYPE tripRouteTRIBMask OBJECT-TYPE
SYNTAX BITS { SYNTAX BITS {
adjTribIns(0), adjTribIns(0),
extTrib(1), extTrib(1),
locTrib(2), locTrib(2),
adjTribOut(3) adjTribOut(3)
} }
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates which TRIB(s) this entry belongs to. This is "Indicates which Telephony Routing Information Base (TRIB)
this entry belongs to. This is
a bit-map of possible types. If the bit has a value of a bit-map of possible types. If the bit has a value of
1, then the entry is a member of the corresponding TRIB 1, then the entry is a member of the corresponding TRIB
type. If the bit has a value of 0 then the entry is not type. If the bit has a value of 0 then the entry is not
a member of the TRIP type. The various bit positions a member of the TRIP type. The various bit positions
are: are:
0 adjTribIns The entry is of type adj-TRIBs-ins. 0 adjTribIns The entry is of type adj-TRIBs-ins,
1 extTrib The entry is of type ext-TRIB. stores routing information that has
2 locTrib The entry is of type loc-TRIB. been learned from inbound UPDATE
3 adjTribOut The entry is of type adj-TRIBs-out." messages.
1 extTrib The entry is of type ext-TRIB, the
best route for a given destination.
2 locTrib The entry is of type loc-TRIB contains
the local TRIP routing information
that the LS has selected.
3 adjTribOut The entry is of type adj-TRIBs-out,
stores the information that the local
Zinman/Walker/Jiang 27
LS has selected for advertisement to
its external peers."
REFERENCE
"RFC 3291, section 3.5."
DEFVAL { { } } DEFVAL { { } }
::= { tripRouteEntry 5 } ::= { tripRouteEntry 5 }
tripRouteAddressSequenceNumber OBJECT-TYPE tripRouteAddressSequenceNumber OBJECT-TYPE
SYNTAX Integer32 (1..2147483647) SYNTAX Integer32 (1..2147483647)
Zinman/Walker/Jiang 26
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates the version of the destination route "Indicates the version of the destination route
originated by the LS identified by originated by the LS identified by
tripRouteAddressOriginatorId intra-domain attribute." tripRouteAddressOriginatorId intra-domain attribute."
::= { tripRouteEntry 6 } ::= { tripRouteEntry 6 }
tripRouteAddressOriginatorId OBJECT-TYPE tripRouteAddressOriginatorId OBJECT-TYPE
SYNTAX TripId SYNTAX TripId
skipping to change at line 1399 skipping to change at line 1468
"Indicates the next hop that messages of a given "Indicates the next hop that messages of a given
protocol destined for tripRouteAddress should protocol destined for tripRouteAddress should
be sent to." be sent to."
::= { tripRouteEntry 9 } ::= { tripRouteEntry 9 }
tripRouteNextHopServerPort OBJECT-TYPE tripRouteNextHopServerPort OBJECT-TYPE
SYNTAX InetPortNumber SYNTAX InetPortNumber
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
Zinman/Walker/Jiang 28
"The port of the next hop server that this route "The port of the next hop server that this route
will use." will use."
::= { tripRouteEntry 10 } ::= { tripRouteEntry 10 }
tripRouteNextHopServerItad OBJECT-TYPE tripRouteNextHopServerItad OBJECT-TYPE
SYNTAX TripItad SYNTAX TripItad
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
Zinman/Walker/Jiang 27
"Indicates the domain of the next hop." "Indicates the domain of the next hop."
::= { tripRouteEntry 11 } ::= { tripRouteEntry 11 }
tripRouteMultiExitDisc OBJECT-TYPE tripRouteMultiExitDisc OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295) SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The Multiple Exit Discriminator allows an LS to "The Multiple Exit Discriminator allows an LS to
discriminate between, and indicate preference for, discriminate between, and indicate preference for,
skipping to change at line 1434 skipping to change at line 1503
"RFC 3219, section 5.8" "RFC 3219, section 5.8"
::= { tripRouteEntry 12 } ::= { tripRouteEntry 12 }
tripRouteLocalPref OBJECT-TYPE tripRouteLocalPref OBJECT-TYPE
SYNTAX Unsigned32 (0..4294967295) SYNTAX Unsigned32 (0..4294967295)
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicated the local LS's degree of preference for an "Indicated the local LS's degree of preference for an
advertised route destination." advertised route destination."
REFERENCE
"RFC 3219, section 4.3.4.7"
::= { tripRouteEntry 13 } ::= { tripRouteEntry 13 }
tripRouteAdvertisementPath OBJECT-TYPE tripRouteAdvertisementPath OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4..252)) SYNTAX OCTET STRING (SIZE(4..252))
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Identifies the ITADs through wich routing information "Identifies the sequence of domains through which this
carried in an advertisement has passed. advertisement has passed.
This object is probably best represented as sequence of This object is probably best represented as sequence of
integer. For SMI compatibility, though, it is TripItads. For SMI compatibility, though, it is
represented as OCTET STRING. This object is a sequence represented as OCTET STRING. This object is a sequence
of ITADs in network byte order." of ITADs in network byte order."
REFERENCE
"RFC 3219, section 4.3.4.4"
::= { tripRouteEntry 14 } ::= { tripRouteEntry 14 }
Zinman/Walker/Jiang 29
tripRouteRoutedPath OBJECT-TYPE tripRouteRoutedPath OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(4..252)) SYNTAX OCTET STRING (SIZE(4..252))
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Identifies the ITADs through which messages sent using "Identifies the ITADs through which messages sent using
this route would pass. These are as subset of this route would pass. These are a subset of
tripRouteAdvertisementPath. tripRouteAdvertisementPath.
This object is probably best represented as sequence of This object is probably best represented as sequence of
integer. For SMI compatibility, though, it is TripItads. For SMI compatibility, though, it is
represented as OCTET STRING. This object is a sequence represented as OCTET STRING. This object is a sequence
Zinman/Walker/Jiang 28
of ITADs in network byte order." of ITADs in network byte order."
REFERENCE
"RFC 3219, section 4.3.4.5"
::= { tripRouteEntry 15 } ::= { tripRouteEntry 15 }
tripRouteAtomicAggregate OBJECT-TYPE tripRouteAtomicAggregate OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates that a route may traverse domains not listed "Indicates that a route may traverse domains not listed
in tripRouteRoutedPath. If an LS selects the less in tripRouteRoutedPath. If an LS selects the less
specific route from a set of overlapping routes, then specific route from a set of overlapping routes, then
this value returns TRUE." this value returns TRUE."
REFERENCE
"RFC 3219, section 4.3.4.6"
::= { tripRouteEntry 16 } ::= { tripRouteEntry 16 }
tripRouteUnknown OBJECT-TYPE tripRouteUnknown OBJECT-TYPE
SYNTAX OCTET STRING (SIZE(0..255)) SYNTAX OCTET STRING (SIZE(0..255))
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"One or more attributes not understood and dropped by "One or more attributes not understood and dropped by
this location server." this location server."
REFERENCE REFERENCE
skipping to change at line 1499 skipping to change at line 1575
tripRouteWithdrawn OBJECT-TYPE tripRouteWithdrawn OBJECT-TYPE
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates if this route is to be removed from service "Indicates if this route is to be removed from service
by the receiving LS." by the receiving LS."
::= { tripRouteEntry 18 } ::= { tripRouteEntry 18 }
tripRouteConverted OBJECT-TYPE tripRouteConverted OBJECT-TYPE
Zinman/Walker/Jiang 30
SYNTAX TruthValue SYNTAX TruthValue
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates if this route has been converted to a "Indicates if this route has been converted to a
different application protocol than it had originally." different application protocol than it had originally."
::= { tripRouteEntry 19 } ::= { tripRouteEntry 19 }
tripRouteReceivedTime OBJECT-TYPE tripRouteReceivedTime OBJECT-TYPE
SYNTAX TimeStamp SYNTAX TimeStamp
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The value of sysUpTime when this route was received." "The value of sysUpTime when this route was received."
::= { tripRouteEntry 20 } ::= { tripRouteEntry 20 }
-- --
Zinman/Walker/Jiang 29
-- TRIP Received Route Community Table. -- TRIP Received Route Community Table.
-- --
tripRouteCommunityTable OBJECT-TYPE tripRouteCommunityTable OBJECT-TYPE
SYNTAX SEQUENCE OF TripRouteCommunityEntry SYNTAX SEQUENCE OF TripRouteCommunityEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A table containing a list of TRIP communities "A table containing a list of TRIP communities associated
associated with a route. Each instance of with a route. Each instance of tripRouteTypeEntry that has
tripPeerRouteTypeEntry has an instance in the the tripRouteTypePeer object set to remote(2) has an
tripRouteTable as a parent. The objects in this table instance in the tripRouteTable as a parent. The objects
are volatile and are refreshed after a reboot." in this table are volatile and are refreshed after a
reboot."
REFERENCE REFERENCE
"RFC 3219, section 5.9." "RFC 3219, section 5.9."
::= { tripMIBObjects 8 } ::= { tripMIBObjects 7 }
tripRouteCommunityEntry OBJECT-TYPE tripRouteCommunityEntry OBJECT-TYPE
SYNTAX TripRouteCommunityEntry SYNTAX TripRouteCommunityEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Information about communities associated with a route. "Information about communities associated with a route.
An entry with a tripRouteAddress of 00 and a An entry with a tripRouteAddress of 00 and a
tripRoutePeer of 0 refers to the local LS." tripRoutePeer of 0 refers to the local LS."
INDEX { applIndex, INDEX { applIndex,
tripRouteAppProtocol, tripRouteAppProtocol,
tripRouteAddressFamily, tripRouteAddressFamily,
tripRouteAddress, tripRouteAddress,
tripRoutePeer, tripRoutePeer,
tripRouteCommunityId tripRouteCommunityId
} }
::= { tripRouteCommunityTable 1 } ::= { tripRouteCommunityTable 1 }
Zinman/Walker/Jiang 31
TripRouteCommunityEntry ::= SEQUENCE { TripRouteCommunityEntry ::= SEQUENCE {
tripRouteCommunityId TripCommunityId, tripRouteCommunityId TripCommunityId,
tripRouteCommunityItad TripItad tripRouteCommunityItad TripItad
} }
tripRouteCommunityId OBJECT-TYPE tripRouteCommunityId OBJECT-TYPE
SYNTAX TripCommunityId SYNTAX TripCommunityId
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The community identifier." "The community identifier."
::= { tripRouteCommunityEntry 1 } ::= { tripRouteCommunityEntry 1 }
tripRouteCommunityItad OBJECT-TYPE tripRouteCommunityItad OBJECT-TYPE
SYNTAX TripItad SYNTAX TripItad
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
Zinman/Walker/Jiang 30
"The ITAD associated with this community." "The ITAD associated with this community."
::= { tripRouteCommunityEntry 2 } ::= { tripRouteCommunityEntry 2 }
-- --
-- tripItadTopologyTable -- tripItadTopologyTable
-- --
tripItadTopologyTable OBJECT-TYPE tripItadTopologyTable OBJECT-TYPE
SYNTAX SEQUENCE OF TripItadTopologyEntry SYNTAX SEQUENCE OF TripItadTopologyEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The sequence of link connections between peers within "The sequence of link connections between peers within an
an ITAD. The objects in this table are volatile and are ITAD. The objects in this table are volatile and are
refreshed after a reboot." refreshed after a reboot."
::= { tripMIBObjects 9 } ::= { tripMIBObjects 8 }
tripItadTopologyEntry OBJECT-TYPE tripItadTopologyEntry OBJECT-TYPE
SYNTAX TripItadTopologyEntry SYNTAX TripItadTopologyEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Information about a peer of the LS identified by "Information about a peer of the LS identified by
tripItadTopologyOrigId." tripItadTopologyOrigId."
INDEX { applIndex, tripItadTopologyOrigId } INDEX { applIndex, tripItadTopologyOrigId }
::= { tripItadTopologyTable 1 } ::= { tripItadTopologyTable 1 }
TripItadTopologyEntry ::= SEQUENCE { TripItadTopologyEntry ::= SEQUENCE {
tripItadTopologyOrigId TripId, tripItadTopologyOrigId TripId,
tripItadTopologySeqNum Unsigned32 tripItadTopologySeqNum Unsigned32
} }
tripItadTopologyOrigId OBJECT-TYPE tripItadTopologyOrigId OBJECT-TYPE
SYNTAX TripId SYNTAX TripId
Zinman/Walker/Jiang 32
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates the internal LS that originated "Indicates the internal LS that originated the ITAD
the ITAD topology information into the ITAD." topology information into the ITAD."
::= { tripItadTopologyEntry 1 } ::= { tripItadTopologyEntry 1 }
tripItadTopologySeqNum OBJECT-TYPE tripItadTopologySeqNum OBJECT-TYPE
SYNTAX Unsigned32 (1..2147483647) SYNTAX Unsigned32 (1..2147483647)
MAX-ACCESS read-only MAX-ACCESS read-only
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Indicates the version of the ITAD topology "Indicates the version of the ITAD topology originated
originated by the LS identified by by the LS identified by tripItadTopologyOrigId."
tripItadTopologyOrigId."
::= { tripItadTopologyEntry 2 } ::= { tripItadTopologyEntry 2 }
-- --
Zinman/Walker/Jiang 31
-- tripItadTopologyIdTable -- tripItadTopologyIdTable
-- --
tripItadTopologyIdTable OBJECT-TYPE tripItadTopologyIdTable OBJECT-TYPE
SYNTAX SEQUENCE OF TripItadTopologyIdEntry SYNTAX SEQUENCE OF TripItadTopologyIdEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The list of other LS's within the ITAD domain that the "The list of other LS's within the ITAD domain that the
LS identified by tripItadTopologyOrigId is currently LS identified by tripItadTopologyOrigId is currently
peering. Each instance of tripItadTopologyIdEntry has an peering. Each instance of tripItadTopologyIdEntry has an
instance in the tripItadTopologyTable as a parent. The instance in the tripItadTopologyTable as a parent. The
objects in this table are volatile and are refreshed objects in this table are volatile and are refreshed
after a reboot." after a reboot."
::= { tripMIBObjects 10 } ::= { tripMIBObjects 9 }
tripItadTopologyIdEntry OBJECT-TYPE tripItadTopologyIdEntry OBJECT-TYPE
SYNTAX TripItadTopologyIdEntry SYNTAX TripItadTopologyIdEntry
MAX-ACCESS not-accessible MAX-ACCESS not-accessible
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Information about a peer to the LS identified by "Information about a peer to the LS identified by
tripItadTopologyOrigId." tripItadTopologyOrigId."
INDEX { applIndex, INDEX { applIndex,
tripItadTopologyOrigId, tripItadTopologyOrigId,
tripItadTopologyId } tripItadTopologyId }
::= { tripItadTopologyIdTable 1 } ::= { tripItadTopologyIdTable 1 }
TripItadTopologyIdEntry ::= SEQUENCE { TripItadTopologyIdEntry ::= SEQUENCE {
tripItadTopologyId TripId tripItadTopologyId TripId
} }
tripItadTopologyId OBJECT-TYPE tripItadTopologyId OBJECT-TYPE
SYNTAX TripId SYNTAX TripId
MAX-ACCESS read-only MAX-ACCESS read-only
Zinman/Walker/Jiang 33
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The index into this entry. Indicates the other location "The index into this entry. Indicates the other location
servers within the ITAD domain that this LS identified servers within the ITAD domain that this LS identified by
by tripItadTopologyOrigId is currently peering." tripItadTopologyOrigId is currently peering."
::= { tripItadTopologyIdEntry 1 } ::= { tripItadTopologyIdEntry 1 }
-- --
-- Notification objects -- Notification objects
-- --
tripNotifApplIndex OBJECT-TYPE tripNotifApplIndex OBJECT-TYPE
SYNTAX Integer32 (1..2147483647) SYNTAX Integer32 (1..2147483647)
MAX-ACCESS accessible-for-notify MAX-ACCESS accessible-for-notify
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"This object contains the applIndex as described "This object contains the applIndex as described in
RFC 2788. It is used to bind this notification with a
Zinman/Walker/Jiang 32 specific instance of TRIP entity."
in RFC 2788. It is used to bind this notification
with a specific instance of TRIP entity."
::= { tripMIBNotifObjects 1 } ::= { tripMIBNotifObjects 1 }
tripNotifPeerAddrInetType OBJECT-TYPE tripNotifPeerAddrInetType OBJECT-TYPE
SYNTAX InetAddressType SYNTAX InetAddressType
MAX-ACCESS accessible-for-notify MAX-ACCESS accessible-for-notify
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The type of Inet Address of the tripNotifPeerAddr." "The type of Inet Address of the tripNotifPeerAddr."
REFERENCE REFERENCE
"RFC 3291, section 3." "RFC 3291, section 3."
skipping to change at line 1715 skipping to change at line 1790
SYNTAX INTEGER { SYNTAX INTEGER {
messageHeader(1), messageHeader(1),
openMessage(2), openMessage(2),
updateMessage(3), updateMessage(3),
holdTimerExpired(4), holdTimerExpired(4),
finiteStateMachine(5), finiteStateMachine(5),
cease(6), cease(6),
tripNotification(7) tripNotification(7)
} }
MAX-ACCESS accessible-for-notify MAX-ACCESS accessible-for-notify
Zinman/Walker/Jiang 34
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Notification message of TRIP error. The meaning of this "Notification message of TRIP error. The meaning of this
value is applicable to the following functions: value is applicable to the following functions:
messageHeader - All errors detected while messageHeader - All errors detected while
processing the TRIP message header. processing the TRIP message header.
openMessage - All errors detected while openMessage - All errors detected while
processing the OPEN message. processing the OPEN message.
updateMessage - All errors detected while updateMessage - All errors detected while
processing the UPDATE message. processing the UPDATE message.
holdTimerExpired - A notification generated when the holdTimerExpired - A notification generated when the
hold timer expires. hold timer expires.
finiteStateMachine - All errors detected by the TRIP finiteStateMachine - All errors detected by the TRIP
Finite State Machine. Finite State Machine.
cease - Any fatal error condition that the cease - Any fatal error condition that the
rest of the values do not cover. rest of the values do not cover.
Zinman/Walker/Jiang 33
tripNotification - Any error encountered while sending tripNotification - Any error encountered while sending
a notification message." a notification message."
::= { tripMIBNotifObjects 4 } ::= { tripMIBNotifObjects 4 }
tripNotifPeerErrSubcode OBJECT-TYPE tripNotifPeerErrSubcode OBJECT-TYPE
SYNTAX Integer32 (1..2147483647) SYNTAX Integer32 (1..2147483647)
MAX-ACCESS accessible-for-notify MAX-ACCESS accessible-for-notify
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The sub error code associated with error code. The "The sub error code associated with error code. The
skipping to change at line 1769 skipping to change at line 1844
UPDATE Message (3) Error Subcodes: UPDATE Message (3) Error Subcodes:
1 - Malformed Attribute List. 1 - Malformed Attribute List.
2 - Unrecognized Well-known Attribute. 2 - Unrecognized Well-known Attribute.
3 - Missing Well-known Mandatory Attribute. 3 - Missing Well-known Mandatory Attribute.
4 - Attribute Flags Error. 4 - Attribute Flags Error.
5 - Attribute Length Error. 5 - Attribute Length Error.
6 - Invalid Attribute." 6 - Invalid Attribute."
::= { tripMIBNotifObjects 5 } ::= { tripMIBNotifObjects 5 }
Zinman/Walker/Jiang 35
-- --
-- Notifications -- Notifications
-- --
tripEstablished NOTIFICATION-TYPE tripConnectionEstablished NOTIFICATION-TYPE
OBJECTS { tripNotifApplIndex } OBJECTS { tripNotifApplIndex,
tripNotifPeerAddrInetType,
tripNotifPeerAddr
}
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The TRIP Established event is generated when the TRIP "The TRIP Connection Established event is generated when
FSM enters the ESTABLISHED state." the TRIP FSM enters the ESTABLISHED state."
::= { tripMIBNotifications 1 } ::= { tripMIBNotifications 1 }
tripConnectionDropped NOTIFICATION-TYPE
OBJECTS { tripNotifApplIndex,
tripNotifPeerAddrInetType,
tripNotifPeerAddr
}
STATUS current
DESCRIPTION
"The TRIP Connection Dropped event is generated when the
TRIP FSM leaves the ESTABLISHED state."
::= { tripMIBNotifications 2 }
tripFSM NOTIFICATION-TYPE tripFSM NOTIFICATION-TYPE
OBJECTS { tripNotifApplIndex, OBJECTS { tripNotifApplIndex,
tripNotifPeerAddrInetType, tripNotifPeerAddrInetType,
tripNotifPeerAddr, tripNotifPeerAddr,
tripNotifPeerErrCode, tripNotifPeerErrCode,
tripNotifPeerErrSubcode, tripNotifPeerErrSubcode,
Zinman/Walker/Jiang 34
tripPeerState tripPeerState
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The trip FSM Event is generated when any error is "The trip FSM Event is generated when any error is
detected by the TRIP Finite State Machine." detected by the TRIP Finite State Machine."
::= { tripMIBNotifications 2 } ::= { tripMIBNotifications 3 }
tripOpenMessageError NOTIFICATION-TYPE tripOpenMessageError NOTIFICATION-TYPE
OBJECTS { tripNotifApplIndex, OBJECTS { tripNotifApplIndex,
tripNotifPeerAddrInetType, tripNotifPeerAddrInetType,
tripNotifPeerAddr, tripNotifPeerAddr,
tripNotifPeerErrCode, tripNotifPeerErrCode,
tripNotifPeerErrSubcode, tripNotifPeerErrSubcode,
tripPeerState tripPeerState
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Errors detected while processing the OPEN message." "Errors detected while processing the OPEN message."
::= { tripMIBNotifications 3 } ::= { tripMIBNotifications 4 }
Zinman/Walker/Jiang 36
tripUpdateMessageError NOTIFICATION-TYPE tripUpdateMessageError NOTIFICATION-TYPE
OBJECTS { tripNotifApplIndex, OBJECTS { tripNotifApplIndex,
tripNotifPeerAddrInetType, tripNotifPeerAddrInetType,
tripNotifPeerAddr, tripNotifPeerAddr,
tripNotifPeerErrCode, tripNotifPeerErrCode,
tripNotifPeerErrSubcode, tripNotifPeerErrSubcode,
tripPeerState tripPeerState
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Errors detected while processing the UPDATE message." "Errors detected while processing the UPDATE message."
::= { tripMIBNotifications 4 } ::= { tripMIBNotifications 5 }
tripHoldTimerExpired NOTIFICATION-TYPE tripHoldTimerExpired NOTIFICATION-TYPE
OBJECTS { tripNotifApplIndex, OBJECTS { tripNotifApplIndex,
tripNotifPeerAddrInetType, tripNotifPeerAddrInetType,
tripNotifPeerAddr, tripNotifPeerAddr,
tripNotifPeerErrCode, tripNotifPeerErrCode,
tripNotifPeerErrSubcode, tripNotifPeerErrSubcode,
tripPeerState tripPeerState
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The system does not receive successive messages within "The system does not receive successive messages within
the period specified by the negotiated Hold Time." the period specified by the negotiated Hold Time."
::= { tripMIBNotifications 5 } ::= { tripMIBNotifications 6 }
tripConnectionCollision NOTIFICATION-TYPE tripConnectionCollision NOTIFICATION-TYPE
OBJECTS { tripNotifApplIndex } OBJECTS { tripNotifApplIndex }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
Zinman/Walker/Jiang 35
"A pair of LSs tried to simultaneously to establish a "A pair of LSs tried to simultaneously to establish a
transport connection to each other." transport connection to each other."
::= { tripMIBNotifications 6 } ::= { tripMIBNotifications 7 }
tripNotificationErr NOTIFICATION-TYPE tripNotificationErr NOTIFICATION-TYPE
OBJECTS { tripNotifApplIndex } OBJECTS { tripNotifApplIndex }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"Generated if there is an error detected in a TRIP "Generated if there is an error detected in a TRIP
notification message sent with another cause. Note that notification message sent with another cause. Note that
the TRIP notification refered to in this object is not the TRIP notification refered to in this object is not
an SNMP notification, it is a specific message described an SNMP notification, it is a specific message described
in the TRIP specification." in the TRIP specification."
REFERENCE REFERENCE
"RFC 3219, section 6.4." "RFC 3219, section 6.4."
::= { tripMIBNotifications 7 } ::= { tripMIBNotifications 8 }
-- --
-- Compliance Statements -- Compliance Statements
-- --
tripCompliance MODULE-COMPLIANCE tripCompliance MODULE-COMPLIANCE
Zinman/Walker/Jiang 37
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The compliance statement for TRIP entities." "The compliance statement for TRIP entities."
MODULE -- this module MODULE -- this module
MANDATORY-GROUPS { tripConfigGroup, MANDATORY-GROUPS { tripConfigGroup,
tripPeerTableConfigGroup, tripPeerTableConfigGroup,
tripRouteGroup, tripRouteGroup,
tripItadTopologyGroup, tripItadTopologyGroup,
tripPeerTableStatsGroup } tripPeerTableStatsGroup }
skipping to change at line 1887 skipping to change at line 1976
send any notifications. If this group is implemented, send any notifications. If this group is implemented,
the tripNotifObjectGroup must also be implemented." the tripNotifObjectGroup must also be implemented."
GROUP tripNotifObjectGroup GROUP tripNotifObjectGroup
DESCRIPTION DESCRIPTION
"This group is optional. A TRIP entity can choose not to "This group is optional. A TRIP entity can choose not to
send any notifications. If this group is implemented, send any notifications. If this group is implemented,
the tripNotificationGroup must also be implemented." the tripNotificationGroup must also be implemented."
MODULE NETWORK-SERVICES-MIB MODULE NETWORK-SERVICES-MIB
MANDATORY-GROUPS { applGroup } MANDATORY-GROUPS { applRFC2788Group }
::= { tripMIBCompliance 1 } ::= { tripMIBCompliance 1 }
-- --
-- Object and event conformance groups -- Object and event conformance groups
-- --
Zinman/Walker/Jiang 36
tripConfigGroup OBJECT-GROUP tripConfigGroup OBJECT-GROUP
OBJECTS { OBJECTS {
tripCfgProtocolVersion, tripCfgProtocolVersion,
tripCfgItad, tripCfgItad,
tripCfgIdentifier, tripCfgIdentifier,
tripCfgOperStatus, tripCfgOperStatus,
tripCfgAdminStatus, tripCfgAdminStatus,
tripCfgAddrIAddrType, tripCfgAddrIAddrType,
tripCfgAddr, tripCfgAddr,
tripCfgPort, tripCfgPort,
tripCfgMinItadOriginationInterval, tripCfgMinItadOriginationInterval,
tripCfgMinRouteAdvertisementInterval, tripCfgMinRouteAdvertisementInterval,
tripCfgMaxPurgeTime, tripCfgMaxPurgeTime,
tripCfgDisableTime, tripCfgDisableTime,
tripCfgSendReceiveMode, tripCfgSendReceiveMode,
tripCfgStorage,
tripSupportedCommunityItad, tripSupportedCommunityItad,
tripSupportedCommunityStorage, tripSupportedCommunityStorage,
tripRouteTypeAddrFamilyId, tripRouteTypePeer,
tripSupportedCommunityRowStatus tripSupportedCommunityRowStatus
Zinman/Walker/Jiang 38
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The global objects for configuring trip." "The global objects for configuring trip."
::= { tripMIBGroups 1 } ::= { tripMIBGroups 1 }
tripPeerTableConfigGroup OBJECT-GROUP tripPeerTableConfigGroup OBJECT-GROUP
OBJECTS { OBJECTS {
tripPeerIdentifier, tripPeerIdentifier,
tripPeerState, tripPeerState,
skipping to change at line 1939 skipping to change at line 2030
tripPeerConnectRetryInterval, tripPeerConnectRetryInterval,
tripPeerMaxRetryInterval, tripPeerMaxRetryInterval,
tripPeerHoldTime, tripPeerHoldTime,
tripPeerKeepAlive, tripPeerKeepAlive,
tripPeerHoldTimeConfigured, tripPeerHoldTimeConfigured,
tripPeerKeepAliveConfigured, tripPeerKeepAliveConfigured,
tripPeerMaxPurgeTime, tripPeerMaxPurgeTime,
tripPeerDisableTime, tripPeerDisableTime,
tripPeerLearned, tripPeerLearned,
tripPeerStorage, tripPeerStorage,
tripPeerRtTypeAddrFamilyId,
tripPeerRowStatus tripPeerRowStatus
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The global objects for configuring the TRIP peer "The global objects for configuring the TRIP peer
table." table."
Zinman/Walker/Jiang 37
::= { tripMIBGroups 2 } ::= { tripMIBGroups 2 }
tripPeerTableStatsGroup OBJECT-GROUP tripPeerTableStatsGroup OBJECT-GROUP
OBJECTS { OBJECTS {
tripPeerInUpdates, tripPeerInUpdates,
tripPeerOutUpdates, tripPeerOutUpdates,
tripPeerInTotalMessages, tripPeerInTotalMessages,
tripPeerOutTotalMessages, tripPeerOutTotalMessages,
tripPeerFsmEstablishedTransitions, tripPeerFsmEstablishedTransitions,
tripPeerFsmEstablishedTime, tripPeerFsmEstablishedTime,
skipping to change at line 1970 skipping to change at line 2058
tripPeerStateChangeTime tripPeerStateChangeTime
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The global statistics the TRIP peer table." "The global statistics the TRIP peer table."
::= { tripMIBGroups 3 } ::= { tripMIBGroups 3 }
tripRouteGroup OBJECT-GROUP tripRouteGroup OBJECT-GROUP
OBJECTS { OBJECTS {
tripRouteTRIBMask, tripRouteTRIBMask,
Zinman/Walker/Jiang 39
tripRouteAddressSequenceNumber, tripRouteAddressSequenceNumber,
tripRouteAddressOriginatorId, tripRouteAddressOriginatorId,
tripRouteNextHopServerIAddrType, tripRouteNextHopServerIAddrType,
tripRouteNextHopServer, tripRouteNextHopServer,
tripRouteNextHopServerPort, tripRouteNextHopServerPort,
tripRouteNextHopServerItad, tripRouteNextHopServerItad,
tripRouteMultiExitDisc, tripRouteMultiExitDisc,
tripRouteLocalPref, tripRouteLocalPref,
tripRouteAdvertisementPath, tripRouteAdvertisementPath,
tripRouteRoutedPath, tripRouteRoutedPath,
skipping to change at line 2001 skipping to change at line 2091
::= { tripMIBGroups 4 } ::= { tripMIBGroups 4 }
tripItadTopologyGroup OBJECT-GROUP tripItadTopologyGroup OBJECT-GROUP
OBJECTS { OBJECTS {
tripItadTopologySeqNum, tripItadTopologySeqNum,
tripItadTopologyId tripItadTopologyId
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The objects that define the TRIP ITAD topology." "The objects that define the TRIP ITAD topology."
Zinman/Walker/Jiang 38
::= { tripMIBGroups 5 } ::= { tripMIBGroups 5 }
tripNotificationGroup NOTIFICATION-GROUP tripNotificationGroup NOTIFICATION-GROUP
NOTIFICATIONS { NOTIFICATIONS {
tripEstablished, tripConnectionEstablished,
tripConnectionDropped,
tripFSM, tripFSM,
tripOpenMessageError, tripOpenMessageError,
tripUpdateMessageError, tripUpdateMessageError,
tripHoldTimerExpired, tripHoldTimerExpired,
tripConnectionCollision, tripConnectionCollision,
tripNotificationErr tripNotificationErr
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"A collection of notifications defined for TRIP." "A collection of notifications defined for TRIP."
::= { tripMIBGroups 6 } ::= { tripMIBGroups 6 }
tripNotifObjectGroup OBJECT-GROUP tripNotifObjectGroup OBJECT-GROUP
OBJECTS { OBJECTS {
tripNotifApplIndex, tripNotifApplIndex,
Zinman/Walker/Jiang 40
tripNotifPeerAddrInetType, tripNotifPeerAddrInetType,
tripNotifPeerAddr, tripNotifPeerAddr,
tripNotifPeerErrCode, tripNotifPeerErrCode,
tripNotifPeerErrSubcode tripNotifPeerErrSubcode
} }
STATUS current STATUS current
DESCRIPTION DESCRIPTION
"The collection of objects that specify information for "The collection of objects that specify information for
TRIP notifications." TRIP notifications."
::= { tripMIBGroups 7 } ::= { tripMIBGroups 7 }
skipping to change at line 2055 skipping to change at line 2146
The managed objects in this MIB contain sensitive information since, The managed objects in this MIB contain sensitive information since,
collectively, they allow tracing and influencing of connections in collectively, they allow tracing and influencing of connections in
TRIP devices and provide information of their connection TRIP devices and provide information of their connection
characteristics. characteristics.
It is thus important to control even GET access to these objects and It is thus important to control even GET access to these objects and
possibly to even encrypt the values of these object when sending possibly to even encrypt the values of these object when sending
them over the network via SNMP. Not all versions of SNMP provide them over the network via SNMP. Not all versions of SNMP provide
features for such a secure environment. features for such a secure environment.
Zinman/Walker/Jiang 39
SNMPv1 by itself is not a secure environment. Even if the network SNMPv1 by itself is not a secure environment. Even if the network
itself is secure (for example by using IPSec), even then, there is itself is secure (for example by using IPSec), even then, there is
no control as to who on the secure network is allowed to access and no control as to who on the secure network is allowed to access and
GET/SET (read/change/create/delete) the objects in this MIB. GET/SET (read/change/create/delete) the objects in this MIB.
It is recommended that the implementers consider the security It is recommended that the implementers consider the security
features as provided by the SNMPv3 framework. Specifically, the use features as provided by the SNMPv3 framework. Specifically, the use
of the User-based Security Model RFC 2574 [RFC2574] and the View- of the User-based Security Model RFC 2574 [RFC2574] and the View-
based Access Control Model RFC 2575 [RFC2575] is recommended. based Access Control Model RFC 2575 [RFC2575] is recommended.
It is then a customer/user responsibility to ensure that the SNMP It is then a customer/user responsibility to ensure that the SNMP
entity giving access to an instance of this MIB, is properly entity giving access to an instance of this MIB, is properly
configured to give access to the objects only to those principals configured to give access to the objects only to those principals
users) that have legitimate rights to indeed GET or SET users) that have legitimate rights to indeed GET or SET
(change/create/delete) them. (change/create/delete) them.
8. Full Copyright Statement 8. Full Copyright Statement
Copyright (C) The Internet Society (2002). All Rights Reserved. Copyright (C) The Internet Society (2002). All Rights Reserved.
Zinman/Walker/Jiang 41
This document and translations of it may be copied and furnished to This document and translations of it may be copied and furnished to
others, and derivative works that comment on or otherwise explain it others, and derivative works that comment on or otherwise explain it
or assist in its implementation may be prepared, copied, published or assist in its implementation may be prepared, copied, published
and distributed, in whole or in part, without restriction of any and distributed, in whole or in part, without restriction of any
kind, provided that the above copyright notice and this paragraph kind, provided that the above copyright notice and this paragraph
are included on all such copies and derivative works. However, this are included on all such copies and derivative works. However, this
document itself may not be modified in any way, such as by removing document itself may not be modified in any way, such as by removing
the copyright notice or references to the Internet Society or other the copyright notice or references to the Internet Society or other
Internet organizations, except as needed for the purpose of Internet organizations, except as needed for the purpose of
developing Internet standards in which case the procedures for developing Internet standards in which case the procedures for
skipping to change at line 2105 skipping to change at line 2197
BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION
HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
9. Normative References 9. Normative References
[RFC3219] Rosenberg, J., Salama, H. and Squire, M., "Telephony [RFC3219] Rosenberg, J., Salama, H. and Squire, M., "Telephony
Routing over IP (TRIP)", RFC 3219 January 2002. Routing over IP (TRIP)", RFC 3219 January 2002.
[RFC3291] Daniele, M., Haberman, B., Routhier, S., Schoenwaelder, [RFC3291] Daniele, M., Haberman, B., Routhier, S., Schoenwaelder,
J., "Network Services Monitoring MIB", RFC 3291, May J., "Textual Conventions for Internet Network
Addresses", RFC 3291, May 2002.
Zinman/Walker/Jiang 40
2002.
[RFC1657] Willis, S., Burruss, J., and Chu, J., "Definitions of [RFC1657] Willis, S., Burruss, J., and Chu, J., "Definitions of
Managed Objects for the Fourth Version of the Border Managed Objects for the Fourth Version of the Border
Gateway Protocol (BGP-4) using SMIv2", RFC 1657, July Gateway Protocol (BGP-4) using SMIv2", RFC 1657, July
1994. 1994.
[RFC1157] Case, J., Fedor, M., Schoffstall, M., and J. Davin, [RFC1157] Case, J., Fedor, M., Schoffstall, M., and J. Davin,
"Simple Network Management Protocol", STD 15, RFC 1157, "Simple Network Management Protocol", STD 15, RFC 1157,
May 1990. May 1990.
[RFC2572] Case, J., Harrington D., Presuhn R., and B. Wijnen, [RFC2572] Case, J., Harrington D., Presuhn R., and B. Wijnen,
"Message Processing and Dispatching for the Simple "Message Processing and Dispatching for the Simple
Network Management Protocol (SNMP)", RFC 2572, April Network Management Protocol (SNMP)", RFC 2572, April
1999. 1999.
[RFC2574] Blumenthal, U., and B. Wijnen, "User-based Security [RFC2574] Blumenthal, U., and B. Wijnen, "User-based Security
Model (USM) for version 3 of the Simple Network Model (USM) for version 3 of the Simple Network
Management Protocol (SNMPv3)", RFC 2574, April 1999. Management Protocol (SNMPv3)", RFC 2574, April 1999.
Zinman/Walker/Jiang 42
[RFC1905] Case, J., McCloghrie, K., Rose, M., and S. Waldbusser, [RFC1905] Case, J., McCloghrie, K., Rose, M., and S. Waldbusser,
"Protocol Operations for Version 2 of the Simple Network "Protocol Operations for Version 2 of the Simple Network
Management Protocol (SNMPv2)", RFC 1905, January 1996. Management Protocol (SNMPv2)", RFC 1905, January 1996.
[RFC2575] Wijnen, B., Presuhn, R., and K. McCloghrie, "View-based [RFC2575] Wijnen, B., Presuhn, R., and K. McCloghrie, "View-based
Access Control Model (VACM) for the Simple Network Access Control Model (VACM) for the Simple Network
Management Protocol (SNMP)", RFC 2575, April 1999. Management Protocol (SNMP)", RFC 2575, April 1999.
[RFC2788] Freed, N., Kille, s., "Network Services Monitoring MIB", [RFC2788] Freed, N., Kille, s., "Network Services Monitoring MIB",
RFC 2788, March 2000. RFC 2788, March 2000.
skipping to change at line 2159 skipping to change at line 2250
[RFC2571] Harrington, D., Presuhn, R., and B. Wijnen, "An [RFC2571] Harrington, D., Presuhn, R., and B. Wijnen, "An
Architecture for Describing SNMP Management Frameworks", Architecture for Describing SNMP Management Frameworks",
RFC 2571, April 1999. RFC 2571, April 1999.
[RFC1155] Rose, M., and K. McCloghrie, "Structure and [RFC1155] Rose, M., and K. McCloghrie, "Structure and
Identification of Management Information for Identification of Management Information for
TCP/IP-based Internets", STD 16, RFC 1155, May 1990. TCP/IP-based Internets", STD 16, RFC 1155, May 1990.
[RFC1212] Rose, M., and K. McCloghrie, "Concise MIB Definitions", [RFC1212] Rose, M., and K. McCloghrie, "Concise MIB Definitions",
Zinman/Walker/Jiang 41
STD 16, RFC 1212, March 1991. STD 16, RFC 1212, March 1991.
[RFC1215] M. Rose, "A Convention for Defining Traps for use with [RFC1215] M. Rose, "A Convention for Defining Traps for use with
the SNMP", RFC 1215, March 1991. the SNMP", RFC 1215, March 1991.
[RFC2578] McCloghrie, K., Perkins, D., Schoenwaelder, J., [RFC2578] McCloghrie, K., Perkins, D., Schoenwaelder, J.,
Case, J., Rose, M., and S. Waldbusser, "Structure of Case, J., Rose, M., and S. Waldbusser, "Structure of
Management Information Version 2 (SMIv2)", STD 58, Management Information Version 2 (SMIv2)", STD 58,
RFC 2578, April 1999. RFC 2578, April 1999.
[RFC2579] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case, [RFC2579] McCloghrie, K., Perkins, D., Schoenwaelder, J., Case,
J., Rose, M., and S. Waldbusser, "Textual Conventions J., Rose, M., and S. Waldbusser, "Textual Conventions
for SMIv2", STD 58, RFC 2579, April 1999. for SMIv2", STD 58, RFC 2579, April 1999.
[RFC2580] McCloghrie, K., Perkins, D., Schoenwaelder, J., [RFC2580] McCloghrie, K., Perkins, D., Schoenwaelder, J.,
Case, J., Rose, M., and S. Waldbusser, "Conformance Case, J., Rose, M., and S. Waldbusser, "Conformance
Statements for SMIv2", STD 58, RFC 2580, April 1999. Statements for SMIv2", STD 58, RFC 2580, April 1999.
[RFC1901] Case, J., McCloghrie, K., Rose, M., and S. Waldbusser, [RFC1901] Case, J., McCloghrie, K., Rose, M., and S. Waldbusser,
"Introduction to Community-based SNMPv2", RFC 1901, "Introduction to Community-based SNMPv2", RFC 1901,
Zinman/Walker/Jiang 43
January 1996. January 1996.
[RFC1906] Case, J., McCloghrie, K., Rose, M., and S. Waldbusser, [RFC1906] Case, J., McCloghrie, K., Rose, M., and S. Waldbusser,
"Transport Mappings for Version 2 of the Simple Network "Transport Mappings for Version 2 of the Simple Network
Management Protocol (SNMPv2)", RFC 1906, January 1996. Management Protocol (SNMPv2)", RFC 1906, January 1996.
[RFC2573] Levi, D., Meyer, P., and B. Stewart, "SNMPv3 [RFC2573] Levi, D., Meyer, P., and B. Stewart, "SNMPv3
Applications", RFC 2573, April 1999. Applications", RFC 2573, April 1999.
[RFC2570] Case, J., Mundy, R., Partain, D., and B. Stewart, [RFC2570] Case, J., Mundy, R., Partain, D., and B. Stewart,
skipping to change at line 2212 skipping to change at line 2303
IETF's procedures with respect to rights in standards-track and IETF's procedures with respect to rights in standards-track and
standards-related documentation can be found in BCP 11. Copies of standards-related documentation can be found in BCP 11. Copies of
claims of rights made available for publication and any assurances claims of rights made available for publication and any assurances
of licenses to be made available, or the result of an attempt made of licenses to be made available, or the result of an attempt made
to obtain a general license or permission for the use of such to obtain a general license or permission for the use of such
proprietary rights by implementers or users of this specification proprietary rights by implementers or users of this specification
can be obtained from the IETF Secretariat. can be obtained from the IETF Secretariat.
The IETF invites any interested party to bring to its attention any The IETF invites any interested party to bring to its attention any
copyrights, patents or patent applications, or other proprietary copyrights, patents or patent applications, or other proprietary
Zinman/Walker/Jiang 42
rights which may cover technology that may be required to practice rights which may cover technology that may be required to practice
this standard. Please address the information to the IETF Executive this standard. Please address the information to the IETF Executive
Director. Director.
The IETF has been notified of intellectual property rights claimed The IETF has been notified of intellectual property rights claimed
in regard to some or all of the specification contained in this in regard to some or all of the specification contained in this
document. For more information consult the online list of claimed document. For more information consult the online list of claimed
rights. rights.
12. Acknowledgments 12. Acknowledgments
The authors wish to thank Bert Wijnen, Dan Romascanu, and Jonathan The authors wish to thank Bert Wijnen, Dan Romascanu, and Jonathan
Rosenberg for their insightful comments and suggestions. Rosenberg for their insightful comments and suggestions.
Thanks to Kevin Lingle for his invaluable comments, help with MIB
things and great ideas.
13. Author's Addresses 13. Author's Addresses
Zinman/Walker/Jiang 44
David Zinman David Zinman
Editor Editor
phone: +1 613 791 2841 312 Adelaide St. West Suite 700
Email: dzinman@sympatico.ca Toronto ON, M5V 1R2
Canada
phone: +1 416 348 1656
email: dzinman@somanetworks.com
Dave Walker Dave Walker
SS8 Networks, Inc. SS8 Networks, Inc.
495 March Road, Suite #500 495 March Road, Suite #500
Ottawa, ON K2K 3G1 Ottawa, ON K2K 3G1
Canada Canada
Phone: +1 613 592 2100 Phone: +1 613 592 2100
Email: drwalker@ss8.com Email: drwalker@ss8.com
Jianping Jiang Jianping Jiang
skipping to change at line 2265 skipping to change at line 2361
Mailing list: iptel@lists.bell-labs.com Mailing list: iptel@lists.bell-labs.com
Chair: Chair:
Jonathan Rosenberg <jdrosen@dynamicsoft.com> Jonathan Rosenberg <jdrosen@dynamicsoft.com>
Transport Area Directors: Transport Area Directors:
Scott Bradner <sob@harvard.edu> Scott Bradner <sob@harvard.edu>
Allison Mankin mankin@east.isi.edu Allison Mankin mankin@east.isi.edu
Zinman/Walker/Jiang 43 Zinman/Walker/Jiang 45
 End of changes. 

This html diff was produced by rfcdiff 1.23, available from http://www.levkowetz.com/ietf/tools/rfcdiff/